Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 13/12/2016, à 17:40

amkoolgarst

[RESOLU] bluetooth apparemment activé mais qui ne marche pas

Bonsoir, mon Bluetooth semble bien être activé mais pas moyen de détecter des dispositifs ou de faire reconnaître mon ordinateur. J'ai parcouru pas mal de sujets mais rien de concluant.
Je vous donne quelques retours qui pourraient aider.
Acer aspire E5-521-80YS
Ubuntu 16.04

dmesg | grep Blue
[   23.542716] Bluetooth: Core ver 2.21
[   23.542776] Bluetooth: HCI device and connection manager initialized
[   23.542783] Bluetooth: HCI socket layer initialized
[   23.542787] Bluetooth: L2CAP socket layer initialized
[   23.542795] Bluetooth: SCO socket layer initialized
[   23.730927] Bluetooth: hci0: BCM: chip id 70
[   23.746924] Bluetooth: hci0: BCM43142A
[   23.746933] Bluetooth: hci0: BCM (001.001.011) build 0000
[   23.860977] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[   25.867057] Bluetooth: hci0 command 0x1003 tx timeout
[   30.339455] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.339461] Bluetooth: BNEP filters: protocol multicast
[   30.339468] Bluetooth: BNEP socket layer initialized
[   61.718315] Bluetooth: RFCOMM TTY layer initialized
[   61.718331] Bluetooth: RFCOMM socket layer initialized
[   61.718341] Bluetooth: RFCOMM ver 1.11
hciconfig -a
hci0:	Type: BR/EDR  Bus: USB
	BD Address: 3C:77:E6:FD:35:DC  ACL MTU: 1021:8  SCO MTU: 64:1
	UP RUNNING PSCAN ISCAN 
	RX bytes:5243 acl:0 sco:0 events:828 errors:0
	TX bytes:9708 acl:0 sco:0 commands:701 errors:0
	Features: 0xff 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH HOLD SNIFF 
	Link mode: SLAVE ACCEPT 
	Name: 'nimoe-Aspire-E5-521'
	Class: 0x1c010c
	Service Classes: Rendering, Capturing, Object Transfer
	Device Class: Computer, Laptop
	HCI Version: 4.0 (0x6)  Revision: 0x0
	LMP Version: 4.0 (0x6)  Subversion: 0x210b
	Manufacturer: Broadcom Corporation (15)

Ici ça a l'air bon:

sudo rfkill list
[sudo] password di nimoe: 
0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
2: brcmwl-0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
dpkg -l | grep blue
ii  blueman                                       2.0.4-1ubuntu2                                amd64        Graphical bluetooth manager
ii  bluetooth                                     5.37-0ubuntu5                                 all          Bluetooth support
ii  bluez                                         5.37-0ubuntu5                                 amd64        Bluetooth tools and daemons
ii  bluez-cups                                    5.37-0ubuntu5                                 amd64        Bluetooth printer driver for CUPS
ii  bluez-dbg                                     5.37-0ubuntu5                                 amd64        Bluetooth tools and daemons (with debugging symbols)
ii  bluez-obexd                                   5.37-0ubuntu5                                 amd64        bluez obex daemon
ii  bluez-tests                                   5.37-0ubuntu5                                 amd64        BlueZ test tools and scripts
ii  bluez-tools                                   0.2.0~20140808-5                              amd64        Set of tools to manage Bluetooth devices for linux
ii  gnome-bluetooth                               3.18.2-1ubuntu2                               amd64        GNOME Bluetooth tools
ii  indicator-bluetooth                           0.0.6+16.04.20160526-0ubuntu1                 amd64        System bluetooth indicator.
ii  libbluetooth3:amd64                           5.37-0ubuntu5                                 amd64        Library to use the BlueZ Linux Bluetooth stack
ii  libbluetooth3-dbg                             5.37-0ubuntu5                                 amd64        Library to use the BlueZ Linux Bluetooth stack with debugging symbols
ii  libgnome-bluetooth13:amd64                    3.18.2-1ubuntu2                               amd64        GNOME Bluetooth tools - support library
ii  pulseaudio-module-bluetooth                   1:8.0-0ubuntu3.1                              amd64        Bluetooth module for PulseAudio sound server
ii  python-bluez                                  0.22-1                                        amd64        Python wrappers around BlueZ for rapid bluetooth development

Merci d'avance.

Dernière modification par amkoolgarst (Le 13/12/2016, à 22:02)


Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne

#2 Le 13/12/2016, à 17:45

xubu1957

Re : [RESOLU] bluetooth apparemment activé mais qui ne marche pas

Bonjour,

Fournis aussi :

lspci  -k | grep -A3 Net
uname -mr; lsb_release -d; 

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#3 Le 13/12/2016, à 18:54

amkoolgarst

Re : [RESOLU] bluetooth apparemment activé mais qui ne marche pas

Voici les retours:

 lspci  -k | grep -A3 Net
02:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
	Subsystem: Foxconn International, Inc. BCM43142 802.11b/g/n
	Kernel driver in use: wl
	Kernel modules: bcma, wl
uname -mr; lsb_release -d; 
4.4.0-53-generic x86_64
Description:	Ubuntu 16.04.1 LTS

Merci.


Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne

#4 Le 13/12/2016, à 19:00

xubu1957

Re : [RESOLU] bluetooth apparemment activé mais qui ne marche pas

Pour ta carte BCM43142 , regardes  : [ RÉSOLU ] Bluetooth activé, mais ne détecte rien
à partir du message 9.


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#5 Le 13/12/2016, à 19:13

amkoolgarst

Re : [RESOLU] bluetooth apparemment activé mais qui ne marche pas

merci je n'ai pas compris quel fichier je dois télécharger...celui bluetooth?


Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne

#6 Le 13/12/2016, à 21:26

amkoolgarst

Re : [RESOLU] bluetooth apparemment activé mais qui ne marche pas

alors j'ai un problème pour identifier la carte

Déterminer le nom du nouveau fichier .hcd :
BCM43142A0-0a5c-216c.hcd = identification de la carte, c'est le même début que le fichier original .hex
BCM43142A0-0a5c-216c.hcd = localisation de la carte, vous pourrez trouver l'information grâce à la commande

lsusb

qui m'a renvoyé l'information suivante :
Bus 003 Device 005: ID 0a5c:216c Broadcom Corp. BCM43142A0 Bluetooth Device

Maintenant que l'on a cette information, convertir le fichier .hex en ouvrant un terminal depuis votre dossier Home :

~/hex2hcd/hex2hcd ~/BCM43142A0_001.001.011.0277.0280.hex ~/BCM43142A0-0a5c-216c.hcd

En remplaçant bien évidemment les noms des fichiers .hex et .hcd par ceux qui vous concernent.

Puis copier le fichier nouvellement créé dans le Home dans le dossier système adéquat :

sudo cp ~/BCM43142A0-0a5c-216c.hcd /lib/firmware/brcm

ok mais lsusb me retourne:

 lsusb
Bus 002 Device 003: ID 06cb:2970 Synaptics, Inc. touchpad
Bus 002 Device 002: ID 0438:7900 Advanced Micro Devices, Inc. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 1bcf:2c6e Sunplus Innovation Technology Inc. 
Bus 001 Device 004: ID 0489:e055 Foxconn / Hon Hai 
Bus 001 Device 003: ID 03f0:0641 Hewlett-Packard 
Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

je ne comprends pas...merci...


Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne

#7 Le 13/12/2016, à 22:01

amkoolgarst

Re : [RESOLU] bluetooth apparemment activé mais qui ne marche pas

Résolu.
En espérant que cela puisse aider:

wget http://www.gnebehay.com/blog/lenovo-flexpad-bluetooth-debian/BCM43142A0-105b-e065.hcd
sudo cp BCM43142A0-105b-e065.hcd /lib/firmware/brcm/BCM.hcd

reboot. Et mon bluetooth fonctionne.


Jifya moja haliinjiki chungu.
In girum imus nocte, ecce, et consumimur igni.

Hors ligne