Contenu | Rechercher | Menus

Annonce

DVD, clés USB et t-shirts Ubuntu-fr disponibles sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 05/06/2017, à 11:54

emena

[Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Bonjour,

J'ai un problème au démarrage. le temps pour démarrer mon PC est très aléatoire. Parfois tout va bien, en deux minutes je suis sur le bureau, parfois cela dure jusqu'à 30 minutes.
J'ai fais des premières recherches qui m'ont conduit à poster ici.

J'ai cartes graphiques, une NVDIA  qui est géré par le serveur libre, mais j'ai changé de cartes mère et depuis j'avais des problèmes de mise en page du bureau, alors je me suis rabattue sur la carte graphique de ma carte mère. Depuis, quand j'arrive à démarrer jusqu'au bureau, tout va à peu près bien. Quand je dis à peu près bien, c'est parce que si j'écoute la radio ou que je regarde une vidéo, j'ai parfois des blocages.
Merci d'avance pour votre aide
EM


Voici déjà quelques résultats :

lspci -nnk | grep -Ei -A 4 "VGA|3D|Display"
00:02.0 Display controller [0380]: Intel Corporation Sky Lake Integrated Graphics [8086:1912] (rev 06)
	DeviceName:  Onboard IGD
	Subsystem: ASUSTeK Computer Inc. Skylake Integrated Graphics [1043:8694]
	Kernel driver in use: i915_bpo
	Kernel modules: i915_bpo
--
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV41 [GeForce 6800 XT] [10de:00c3] (rev a2)
	Subsystem: eVga.com. Corp. NV41 [GeForce 6800 XT] [3842:c381]
	Kernel driver in use: nouveau
	Kernel modules: nvidiafb, nouveau
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
	Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:8677]
lsb_release -d; printenv GDMSESSION ; uname -mr
Description:	Ubuntu 16.04.2 LTS
ubuntu
4.4.0-78-generic x86_64


Je n'ai pas de fichier /etc/X11/xorg.conf
Voici le log de la dernière session. Je l'ai pris très vite après le démarrage, de mon point de vue tout s'est bien passé lors de ce démarrage.

$ cat /var/log/Xorg.0.log 
[    31.101] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    31.101] X Protocol Version 11, Revision 0
[    31.101] Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
[    31.101] Current Operating System: Linux ano 4.4.0-78-generic #99-Ubuntu SMP Thu Apr 27 15:29:09 UTC 2017 x86_64
[    31.101] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro
[    31.101] Build Date: 02 November 2016  10:06:10PM
[    31.101] xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support) 
[    31.101] Current version of pixman: 0.33.6
[    31.101] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    31.101] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.101] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun  5 11:44:46 2017
[    31.570] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    31.570] (==) No Layout section.  Using the first Screen section.
[    31.570] (==) No screen section available. Using defaults.
[    31.570] (**) |-->Screen "Default Screen Section" (0)
[    31.570] (**) |   |-->Monitor "<default monitor>"
[    31.621] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    31.621] (==) Automatically adding devices
[    31.621] (==) Automatically enabling devices
[    31.621] (==) Automatically adding GPU devices
[    31.621] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    31.621] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    31.621] 	Entry deleted from font path.
[    31.621] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    31.621] 	Entry deleted from font path.
[    31.621] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    31.621] 	Entry deleted from font path.
[    31.621] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    31.621] 	Entry deleted from font path.
[    31.621] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    31.621] 	Entry deleted from font path.
[    31.621] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    31.621] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    31.621] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    31.626] (II) Loader magic: 0x562c4f82bdc0
[    31.626] (II) Module ABI versions:
[    31.626] 	X.Org ANSI C Emulation: 0.4
[    31.626] 	X.Org Video Driver: 20.0
[    31.626] 	X.Org XInput driver : 22.1
[    31.626] 	X.Org Server Extension : 9.0
[    31.626] (++) using VT number 7

[    31.626] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    31.627] (II) xfree86: Adding drm device (/dev/dri/card1)
[    31.627] (II) xfree86: Adding drm device (/dev/dri/card0)
[    31.628] (--) PCI: (0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xf4000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    31.628] (--) PCI:*(0:1:0:0) 10de:00c3:3842:c381 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf5000000/16777216, BIOS @ 0x????????/131072
[    31.628] (II) LoadModule: "glx"
[    31.769] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    38.813] (II) Module glx: vendor="X.Org Foundation"
[    38.813] 	compiled for 1.18.4, module version = 1.0.0
[    38.813] 	ABI class: X.Org Server Extension, version 9.0
[    38.813] (==) AIGLX enabled
[    38.813] (==) Matched nvidia as autoconfigured driver 0
[    38.813] (==) Matched nouveau as autoconfigured driver 1
[    38.813] (==) Matched intel as autoconfigured driver 2
[    38.813] (==) Matched nvidia as autoconfigured driver 3
[    38.813] (==) Matched nouveau as autoconfigured driver 4
[    38.813] (==) Matched modesetting as autoconfigured driver 5
[    38.813] (==) Matched fbdev as autoconfigured driver 6
[    38.813] (==) Matched vesa as autoconfigured driver 7
[    38.813] (==) Assigned the driver to the xf86ConfigLayout
[    38.813] (II) LoadModule: "nvidia"
[    38.813] (WW) Warning, couldn't open module nvidia
[    38.813] (II) UnloadModule: "nvidia"
[    38.813] (II) Unloading nvidia
[    38.813] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    38.813] (II) LoadModule: "nouveau"
[    38.813] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    38.943] (II) Module nouveau: vendor="X.Org Foundation"
[    38.943] 	compiled for 1.18.1, module version = 1.0.12
[    38.943] 	Module class: X.Org Video Driver
[    38.943] 	ABI class: X.Org Video Driver, version 20.0
[    38.943] (II) LoadModule: "intel"
[    38.943] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    39.218] (II) Module intel: vendor="X.Org Foundation"
[    39.218] 	compiled for 1.18.4, module version = 2.99.917
[    39.218] 	Module class: X.Org Video Driver
[    39.218] 	ABI class: X.Org Video Driver, version 20.0
[    39.218] (II) LoadModule: "modesetting"
[    39.218] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    39.218] (II) Module modesetting: vendor="X.Org Foundation"
[    39.218] 	compiled for 1.18.4, module version = 1.18.4
[    39.218] 	Module class: X.Org Video Driver
[    39.218] 	ABI class: X.Org Video Driver, version 20.0
[    39.218] (II) LoadModule: "fbdev"
[    39.218] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    39.218] (II) Module fbdev: vendor="X.Org Foundation"
[    39.218] 	compiled for 1.18.1, module version = 0.4.4
[    39.218] 	Module class: X.Org Video Driver
[    39.218] 	ABI class: X.Org Video Driver, version 20.0
[    39.218] (II) LoadModule: "vesa"
[    39.218] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    39.218] (II) Module vesa: vendor="X.Org Foundation"
[    39.218] 	compiled for 1.18.1, module version = 2.3.4
[    39.218] 	Module class: X.Org Video Driver
[    39.218] 	ABI class: X.Org Video Driver, version 20.0
[    39.218] (==) Matched nvidia as autoconfigured driver 0
[    39.218] (==) Matched nouveau as autoconfigured driver 1
[    39.218] (==) Matched intel as autoconfigured driver 2
[    39.218] (==) Matched nvidia as autoconfigured driver 3
[    39.218] (==) Matched nouveau as autoconfigured driver 4
[    39.218] (==) Matched modesetting as autoconfigured driver 5
[    39.218] (==) Matched fbdev as autoconfigured driver 6
[    39.218] (==) Matched vesa as autoconfigured driver 7
[    39.218] (==) Assigned the driver to the xf86ConfigLayout
[    39.218] (II) LoadModule: "nvidia"
[    39.218] (WW) Warning, couldn't open module nvidia
[    39.218] (II) UnloadModule: "nvidia"
[    39.218] (II) Unloading nvidia
[    39.218] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    39.218] (II) LoadModule: "nouveau"
[    39.218] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    39.218] (II) Module nouveau: vendor="X.Org Foundation"
[    39.218] 	compiled for 1.18.1, module version = 1.0.12
[    39.218] 	Module class: X.Org Video Driver
[    39.218] 	ABI class: X.Org Video Driver, version 20.0
[    39.218] (II) UnloadModule: "nouveau"
[    39.218] (II) Unloading nouveau
[    39.218] (II) Failed to load module "nouveau" (already loaded, 0)
[    39.218] (II) LoadModule: "intel"
[    39.218] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    39.218] (II) Module intel: vendor="X.Org Foundation"
[    39.218] 	compiled for 1.18.4, module version = 2.99.917
[    39.218] 	Module class: X.Org Video Driver
[    39.218] 	ABI class: X.Org Video Driver, version 20.0
[    39.218] (II) UnloadModule: "intel"
[    39.218] (II) Unloading intel
[    39.218] (II) Failed to load module "intel" (already loaded, 0)
[    39.218] (II) LoadModule: "modesetting"
[    39.219] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    39.219] (II) Module modesetting: vendor="X.Org Foundation"
[    39.219] 	compiled for 1.18.4, module version = 1.18.4
[    39.219] 	Module class: X.Org Video Driver
[    39.219] 	ABI class: X.Org Video Driver, version 20.0
[    39.219] (II) UnloadModule: "modesetting"
[    39.219] (II) Unloading modesetting
[    39.219] (II) Failed to load module "modesetting" (already loaded, 0)
[    39.219] (II) LoadModule: "fbdev"
[    39.219] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    39.219] (II) Module fbdev: vendor="X.Org Foundation"
[    39.219] 	compiled for 1.18.1, module version = 0.4.4
[    39.219] 	Module class: X.Org Video Driver
[    39.219] 	ABI class: X.Org Video Driver, version 20.0
[    39.219] (II) UnloadModule: "fbdev"
[    39.219] (II) Unloading fbdev
[    39.219] (II) Failed to load module "fbdev" (already loaded, 0)
[    39.219] (II) LoadModule: "vesa"
[    39.219] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    39.219] (II) Module vesa: vendor="X.Org Foundation"
[    39.219] 	compiled for 1.18.1, module version = 2.3.4
[    39.219] 	Module class: X.Org Video Driver
[    39.219] 	ABI class: X.Org Video Driver, version 20.0
[    39.219] (II) UnloadModule: "vesa"
[    39.219] (II) Unloading vesa
[    39.219] (II) Failed to load module "vesa" (already loaded, 0)
[    39.219] (II) NOUVEAU driver Date:   Tue Dec 8 15:52:25 2015 +1000
[    39.219] (II) NOUVEAU driver for NVIDIA chipset families :
[    39.219] 	RIVA TNT        (NV04)
[    39.219] 	RIVA TNT2       (NV05)
[    39.219] 	GeForce 256     (NV10)
[    39.219] 	GeForce 2       (NV11, NV15)
[    39.219] 	GeForce 4MX     (NV17, NV18)
[    39.219] 	GeForce 3       (NV20)
[    39.219] 	GeForce 4Ti     (NV25, NV28)
[    39.219] 	GeForce FX      (NV3x)
[    39.219] 	GeForce 6       (NV4x)
[    39.219] 	GeForce 7       (G7x)
[    39.219] 	GeForce 8       (G8x)
[    39.219] 	GeForce GTX 200 (NVA0)
[    39.219] 	GeForce GTX 400 (NVC0)
[    39.219] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    39.219] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    39.219] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    39.219] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    39.219] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    39.219] (II) FBDEV: driver for framebuffer: fbdev
[    39.219] (II) VESA: driver for VESA chipsets: vesa
[    39.219] (II) [drm] nouveau interface version: 1.3.1
[    39.220] (II) intel(G0): Using Kernel Mode Setting driver: i915_bpo, version 1.6.0 20160425
[    39.220] (II) intel(G0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[    39.220] (II) intel(G0): SNA compiled for use with valgrind
[    39.220] (WW) Falling back to old probe method for modesetting
[    39.221] (WW) Falling back to old probe method for fbdev
[    39.221] (II) Loading sub module "fbdevhw"
[    39.221] (II) LoadModule: "fbdevhw"
[    39.221] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    39.221] (II) Module fbdevhw: vendor="X.Org Foundation"
[    39.221] 	compiled for 1.18.4, module version = 0.0.2
[    39.221] 	ABI class: X.Org Video Driver, version 20.0
[    39.221] (WW) Falling back to old probe method for vesa
[    39.221] (II) Loading sub module "dri2"
[    39.221] (II) LoadModule: "dri2"
[    39.221] (II) Module "dri2" already built-in
[    39.221] (--) NOUVEAU(0): Chipset: "NVIDIA NV41"
[    39.221] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    39.221] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    39.221] (==) NOUVEAU(0): RGB weight 888
[    39.221] (==) NOUVEAU(0): Default visual is TrueColor
[    39.221] (==) NOUVEAU(0): Using HW cursor
[    39.221] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[    39.221] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    39.221] (==) NOUVEAU(0): Page flipping enabled
[    39.221] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    39.221] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    39.221] (II) NOUVEAU(0): Initializing outputs ...
[    39.250] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    39.280] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    39.308] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    39.308] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    39.308] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    39.308] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    39.337] (II) NOUVEAU(0): EDID for output VGA-1
[    39.337] (II) NOUVEAU(0): Manufacturer: SAM  Model: 5e6  Serial#: 1314271795
[    39.337] (II) NOUVEAU(0): Year: 2010  Week: 11
[    39.337] (II) NOUVEAU(0): EDID Version: 1.3
[    39.337] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    39.337] (II) NOUVEAU(0): Sync:  Separate  Composite  SyncOnGreen
[    39.337] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    39.337] (II) NOUVEAU(0): Gamma: 2.20
[    39.337] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[    39.337] (II) NOUVEAU(0): First detailed timing is preferred mode
[    39.337] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    39.337] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    39.337] (II) NOUVEAU(0): Supported established timings:
[    39.337] (II) NOUVEAU(0): 720x400@70Hz
[    39.337] (II) NOUVEAU(0): 640x480@60Hz
[    39.337] (II) NOUVEAU(0): 640x480@67Hz
[    39.337] (II) NOUVEAU(0): 640x480@72Hz
[    39.337] (II) NOUVEAU(0): 640x480@75Hz
[    39.337] (II) NOUVEAU(0): 800x600@56Hz
[    39.337] (II) NOUVEAU(0): 800x600@60Hz
[    39.337] (II) NOUVEAU(0): 800x600@72Hz
[    39.337] (II) NOUVEAU(0): 800x600@75Hz
[    39.337] (II) NOUVEAU(0): 832x624@75Hz
[    39.337] (II) NOUVEAU(0): 1024x768@60Hz
[    39.337] (II) NOUVEAU(0): 1024x768@70Hz
[    39.337] (II) NOUVEAU(0): 1024x768@75Hz
[    39.337] (II) NOUVEAU(0): 1280x1024@75Hz
[    39.337] (II) NOUVEAU(0): 1152x864@75Hz
[    39.337] (II) NOUVEAU(0): Manufacturer's mask: 0
[    39.337] (II) NOUVEAU(0): Supported standard timings:
[    39.337] (II) NOUVEAU(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    39.337] (II) NOUVEAU(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    39.337] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    39.337] (II) NOUVEAU(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    39.337] (II) NOUVEAU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    39.337] (II) NOUVEAU(0): #5: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    39.337] (II) NOUVEAU(0): #6: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    39.337] (II) NOUVEAU(0): #7: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    39.337] (II) NOUVEAU(0): Supported detailed timing:
[    39.337] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[    39.337] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    39.337] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    39.337] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[    39.337] (II) NOUVEAU(0): Monitor name: SyncMaster
[    39.337] (II) NOUVEAU(0): Serial No: H9XZ300477
[    39.337] (II) NOUVEAU(0): EDID (in hex):
[    39.337] (II) NOUVEAU(0): 	00ffffffffffff004c2de6053332564e
[    39.337] (II) NOUVEAU(0): 	0b1401030e331d782aee91a3544c9926
[    39.337] (II) NOUVEAU(0): 	0f5054bfef808100814081809500b300
[    39.337] (II) NOUVEAU(0): 	a940714f950f023a801871382d40582c
[    39.337] (II) NOUVEAU(0): 	4500fe1f1100001e000000fd00384b1e
[    39.337] (II) NOUVEAU(0): 	5111000a202020202020000000fc0053
[    39.337] (II) NOUVEAU(0): 	796e634d61737465720a2020000000ff
[    39.337] (II) NOUVEAU(0): 	004839585a3330303437370a20200073
[    39.337] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    39.337] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    39.337] (II) NOUVEAU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    39.337] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    39.338] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    39.368] (II) NOUVEAU(0): EDID for output DVI-I-1
[    39.396] (II) NOUVEAU(0): EDID for output TV-1
[    39.396] (II) NOUVEAU(0): Printing probed modes for output TV-1
[    39.396] (II) NOUVEAU(0): Modeline "720x576"x50.0   28.66  720 776 856 960  576 576 588 597 -hsync -vsync (29.9 kHz eP)
[    39.396] (II) NOUVEAU(0): Modeline "1024x768"x50.0   54.16  1024 1064 1200 1344  768 768 777 806 -hsync -vsync (40.3 kHz e)
[    39.396] (II) NOUVEAU(0): Modeline "800x600"x50.0   32.14  800 840 920 1040  600 600 604 618 +hsync +vsync (30.9 kHz e)
[    39.396] (II) NOUVEAU(0): Modeline "720x480"x50.0   25.20  720 752 872 960  480 480 493 525 -hsync -vsync (26.2 kHz e)
[    39.396] (II) NOUVEAU(0): Modeline "640x480"x50.0   23.10  640 672 768 880  480 480 492 525 -hsync -vsync (26.2 kHz e)
[    39.396] (II) NOUVEAU(0): Modeline "400x300"x100.0   20.10  400 432 496 640  300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
[    39.396] (II) NOUVEAU(0): Modeline "320x240"x100.0   14.73  320 344 392 560  240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
[    39.396] (II) NOUVEAU(0): Modeline "320x200"x100.0   12.32  320 344 392 560  200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
[    39.396] (II) NOUVEAU(0): Output VGA-1 connected
[    39.396] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[    39.396] (II) NOUVEAU(0): Output TV-1 connected
[    39.396] (II) NOUVEAU(0): Using spanning desktop for initial modes
[    39.396] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080 +0+0
[    39.396] (II) NOUVEAU(0): Output TV-1 using initial mode 720x576 +1920+0
[    39.396] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    39.396] (--) NOUVEAU(0): Virtual size is 2640x1080 (pitch 0)
[    39.396] (**) NOUVEAU(0):  Driver mode "720x576": 28.7 MHz (scaled from 0.0 MHz), 29.9 kHz, 50.0 Hz
[    39.396] (II) NOUVEAU(0): Modeline "720x576"x50.0   28.66  720 776 856 960  576 576 588 597 -hsync -vsync (29.9 kHz eP)
[    39.396] (**) NOUVEAU(0):  Driver mode "1024x768": 54.2 MHz (scaled from 0.0 MHz), 40.3 kHz, 50.0 Hz
[    39.396] (II) NOUVEAU(0): Modeline "1024x768"x50.0   54.16  1024 1064 1200 1344  768 768 777 806 -hsync -vsync (40.3 kHz e)
[    39.396] (**) NOUVEAU(0):  Driver mode "800x600": 32.1 MHz (scaled from 0.0 MHz), 30.9 kHz, 50.0 Hz
[    39.396] (II) NOUVEAU(0): Modeline "800x600"x50.0   32.14  800 840 920 1040  600 600 604 618 +hsync +vsync (30.9 kHz e)
[    39.396] (**) NOUVEAU(0):  Driver mode "720x480": 25.2 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
[    39.396] (II) NOUVEAU(0): Modeline "720x480"x50.0   25.20  720 752 872 960  480 480 493 525 -hsync -vsync (26.2 kHz e)
[    39.396] (**) NOUVEAU(0):  Driver mode "640x480": 23.1 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
[    39.396] (II) NOUVEAU(0): Modeline "640x480"x50.0   23.10  640 672 768 880  480 480 492 525 -hsync -vsync (26.2 kHz e)
[    39.396] (**) NOUVEAU(0):  Driver mode "400x300": 20.1 MHz (scaled from 0.0 MHz), 31.4 kHz, 100.0 Hz (D)
[    39.396] (II) NOUVEAU(0): Modeline "400x300"x100.0   20.10  400 432 496 640  300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
[    39.396] (**) NOUVEAU(0):  Driver mode "320x240": 14.7 MHz (scaled from 0.0 MHz), 26.3 kHz, 100.0 Hz (D)
[    39.396] (II) NOUVEAU(0): Modeline "320x240"x100.0   14.73  320 344 392 560  240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
[    39.396] (**) NOUVEAU(0):  Driver mode "320x200": 12.3 MHz (scaled from 0.0 MHz), 22.0 kHz, 100.0 Hz (D)
[    39.396] (II) NOUVEAU(0): Modeline "320x200"x100.0   12.32  320 344 392 560  200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
[    39.396] (==) NOUVEAU(0): DPI set to (96, 96)
[    39.396] (II) Loading sub module "fb"
[    39.396] (II) LoadModule: "fb"
[    39.396] (II) Loading /usr/lib/xorg/modules/libfb.so
[    39.502] (II) Module fb: vendor="X.Org Foundation"
[    39.502] 	compiled for 1.18.4, module version = 1.0.0
[    39.502] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    39.502] (II) Loading sub module "shadowfb"
[    39.502] (II) LoadModule: "shadowfb"
[    39.502] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    39.519] (II) Module shadowfb: vendor="X.Org Foundation"
[    39.519] 	compiled for 1.18.4, module version = 1.0.0
[    39.519] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    39.530] (--) intel(G0): gen9 engineering sample
[    39.530] (--) intel(G0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[    39.530] (==) intel(G0): Depth 24, (--) framebuffer bpp 32
[    39.530] (==) intel(G0): RGB weight 888
[    39.530] (==) intel(G0): Default visual is TrueColor
[    39.531] (II) intel(G0): Output HDMI1 has no monitor section
[    39.531] (II) intel(G0): Enabled output HDMI1
[    39.531] (II) intel(G0): Output HDMI2 has no monitor section
[    39.531] (II) intel(G0): Enabled output HDMI2
[    39.531] (II) intel(G0): Output DP1 has no monitor section
[    39.531] (II) intel(G0): Enabled output DP1
[    39.531] (--) intel(G0): Using a maximum size of 256x256 for hardware cursors
[    39.531] (II) intel(G0): Output VIRTUAL1 has no monitor section
[    39.531] (II) intel(G0): Enabled output VIRTUAL1
[    39.531] (==) intel(G0): TearFree disabled
[    39.531] (==) intel(G0): DPI set to (96, 96)
[    39.531] (II) Loading sub module "dri2"
[    39.531] (II) LoadModule: "dri2"
[    39.531] (II) Module "dri2" already built-in
[    39.531] (II) Loading sub module "present"
[    39.531] (II) LoadModule: "present"
[    39.531] (II) Module "present" already built-in
[    39.531] (II) UnloadModule: "modesetting"
[    39.531] (II) Unloading modesetting
[    39.531] (II) UnloadModule: "fbdev"
[    39.531] (II) Unloading fbdev
[    39.531] (II) UnloadSubModule: "fbdevhw"
[    39.531] (II) Unloading fbdevhw
[    39.531] (II) UnloadModule: "vesa"
[    39.531] (II) Unloading vesa
[    39.531] (--) Depth 24 pixmap format is 32 bpp
[    39.686] (II) intel(G0): SNA initialized with Skylake (gen9) backend
[    39.686] (==) intel(G0): Backing store enabled
[    39.686] (==) intel(G0): Silken mouse enabled
[    39.687] (II) intel(G0): HW Cursor enabled
[    39.687] (II) intel(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    39.687] (==) intel(G0): DPMS enabled
[    39.687] (==) intel(G0): Display hotplug detection enabled
[    39.687] (II) intel(G0): [DRI2] Setup complete
[    39.687] (II) intel(G0): [DRI2]   DRI driver: i965
[    39.687] (II) intel(G0): [DRI2]   VDPAU driver: va_gl
[    39.687] (II) intel(G0): direct rendering: DRI2 enabled
[    39.687] (II) intel(G0): hardware support for Present enabled
[    39.694] (II) NOUVEAU(0): Channel setup complete.
[    39.695] (II) NOUVEAU(0): Hardware support for Present enabled
[    39.695] (II) NOUVEAU(0): [DRI2] Setup complete
[    39.695] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    39.695] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    39.695] (II) Loading sub module "exa"
[    39.695] (II) LoadModule: "exa"
[    39.695] (II) Loading /usr/lib/xorg/modules/libexa.so
[    39.706] (II) Module exa: vendor="X.Org Foundation"
[    39.706] 	compiled for 1.18.4, module version = 2.6.0
[    39.706] 	ABI class: X.Org Video Driver, version 20.0
[    39.714] (II) EXA(0): Driver allocated offscreen pixmaps
[    39.714] (II) EXA(0): Driver registered support for the following operations:
[    39.714] (II)         Solid
[    39.714] (II)         Copy
[    39.714] (II)         Composite (RENDER acceleration)
[    39.714] (II)         UploadToScreen
[    39.714] (II)         DownloadFromScreen
[    39.714] (==) NOUVEAU(0): Backing store enabled
[    39.714] (==) NOUVEAU(0): Silken mouse enabled
[    39.714] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[    39.714] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    39.714] (==) NOUVEAU(0): DPMS enabled
[    39.714] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    39.714] (--) RandR disabled
[    39.730] (II) SELinux: Disabled on system
[    43.362] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    43.362] (II) AIGLX: enabled GLX_ARB_create_context
[    43.362] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    43.362] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    43.362] (II) AIGLX: enabled GLX_INTEL_swap_event
[    43.362] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    43.362] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    43.362] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    43.362] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    43.362] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    43.362] (II) AIGLX: Loaded and initialized nouveau
[    43.362] (II) GLX: Initialized DRI2 GL provider for screen 0
[    43.365] (II) NOUVEAU(0): NVEnterVT is called.
[    43.365] (II) NOUVEAU(0): Setting screen physical size to 698 x 285
[    43.365] resize called 2640 1080
[    44.077] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    44.077] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    44.077] (II) LoadModule: "evdev"
[    44.077] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    44.504] (II) Module evdev: vendor="X.Org Foundation"
[    44.504] 	compiled for 1.18.1, module version = 2.10.1
[    44.504] 	Module class: X.Org XInput Driver
[    44.504] 	ABI class: X.Org XInput driver, version 22.1
[    44.504] (II) Using input driver 'evdev' for 'Power Button'
[    44.504] (**) Power Button: always reports core events
[    44.504] (**) evdev: Power Button: Device: "/dev/input/event2"
[    44.504] (--) evdev: Power Button: Vendor 0 Product 0x1
[    44.504] (--) evdev: Power Button: Found keys
[    44.504] (II) evdev: Power Button: Configuring as keyboard
[    44.504] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    44.504] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    44.504] (**) Option "xkb_rules" "evdev"
[    44.504] (**) Option "xkb_model" "pc105"
[    44.504] (**) Option "xkb_layout" "fr"
[    44.504] (**) Option "xkb_variant" "oss"
[    44.514] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    44.514] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    44.514] (II) Using input driver 'evdev' for 'Video Bus'
[    44.514] (**) Video Bus: always reports core events
[    44.514] (**) evdev: Video Bus: Device: "/dev/input/event3"
[    44.514] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    44.514] (--) evdev: Video Bus: Found keys
[    44.514] (II) evdev: Video Bus: Configuring as keyboard
[    44.514] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event3"
[    44.514] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    44.514] (**) Option "xkb_rules" "evdev"
[    44.514] (**) Option "xkb_model" "pc105"
[    44.514] (**) Option "xkb_layout" "fr"
[    44.514] (**) Option "xkb_variant" "oss"
[    44.515] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    44.515] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    44.515] (II) Using input driver 'evdev' for 'Power Button'
[    44.515] (**) Power Button: always reports core events
[    44.515] (**) evdev: Power Button: Device: "/dev/input/event1"
[    44.515] (--) evdev: Power Button: Vendor 0 Product 0x1
[    44.515] (--) evdev: Power Button: Found keys
[    44.515] (II) evdev: Power Button: Configuring as keyboard
[    44.515] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    44.515] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    44.515] (**) Option "xkb_rules" "evdev"
[    44.515] (**) Option "xkb_model" "pc105"
[    44.515] (**) Option "xkb_layout" "fr"
[    44.515] (**) Option "xkb_variant" "oss"
[    44.515] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    44.515] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    44.515] (II) Using input driver 'evdev' for 'Sleep Button'
[    44.515] (**) Sleep Button: always reports core events
[    44.515] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    44.515] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    44.515] (--) evdev: Sleep Button: Found keys
[    44.515] (II) evdev: Sleep Button: Configuring as keyboard
[    44.515] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    44.515] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    44.515] (**) Option "xkb_rules" "evdev"
[    44.515] (**) Option "xkb_model" "pc105"
[    44.515] (**) Option "xkb_layout" "fr"
[    44.515] (**) Option "xkb_variant" "oss"
[    44.516] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event4)
[    44.516] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[    44.516] (II) Using input driver 'evdev' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)'
[    44.516] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[    44.516] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event4"
[    44.572] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x39
[    44.572] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
[    44.572] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[    44.572] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
[    44.572] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
[    44.572] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
[    44.572] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[    44.572] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[    44.572] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    44.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:045E:0039.0001/input/input7/event4"
[    44.572] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 10)
[    44.572] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
[    44.572] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[    44.572] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[    44.572] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[    44.572] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[    44.572] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[    44.572] (II) No input driver specified, ignoring this device.
[    44.572] (II) This device may have been added with another device file.
[    44.572] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event5)
[    44.572] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    44.572] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[    44.572] (**) Logitech Logitech USB Keyboard: always reports core events
[    44.572] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event5"
[    44.572] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc316
[    44.572] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[    44.572] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[    44.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C316.0002/input/input8/event5"
[    44.572] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 11)
[    44.572] (**) Option "xkb_rules" "evdev"
[    44.572] (**) Option "xkb_model" "pc105"
[    44.572] (**) Option "xkb_layout" "fr"
[    44.572] (**) Option "xkb_variant" "oss"
[    44.573] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event6)
[    44.573] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    44.573] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[    44.573] (**) Logitech Logitech USB Keyboard: always reports core events
[    44.573] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event6"
[    44.573] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc316
[    44.573] (--) evdev: Logitech Logitech USB Keyboard: Found 1 mouse buttons
[    44.573] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[    44.573] (II) evdev: Logitech Logitech USB Keyboard: Forcing relative x/y axes to exist.
[    44.573] (II) evdev: Logitech Logitech USB Keyboard: Configuring as mouse
[    44.573] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[    44.573] (**) evdev: Logitech Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[    44.573] (**) evdev: Logitech Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    44.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C316.0003/input/input9/event6"
[    44.573] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 12)
[    44.573] (**) Option "xkb_rules" "evdev"
[    44.573] (**) Option "xkb_model" "pc105"
[    44.573] (**) Option "xkb_layout" "fr"
[    44.573] (**) Option "xkb_variant" "oss"
[    44.573] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[    44.573] (II) No input driver specified, ignoring this device.
[    44.573] (II) This device may have been added with another device file.
[    44.573] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[    44.573] (II) No input driver specified, ignoring this device.
[    44.573] (II) This device may have been added with another device file.
[    44.574] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[    44.574] (II) No input driver specified, ignoring this device.
[    44.574] (II) This device may have been added with another device file.
[    44.574] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[    44.574] (II) No input driver specified, ignoring this device.
[    44.574] (II) This device may have been added with another device file.
[    44.574] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[    44.574] (II) No input driver specified, ignoring this device.
[    44.574] (II) This device may have been added with another device file.
[    44.574] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[    44.574] (II) No input driver specified, ignoring this device.
[    44.574] (II) This device may have been added with another device file.
[    44.574] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[    44.574] (II) No input driver specified, ignoring this device.
[    44.574] (II) This device may have been added with another device file.
[    44.574] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[    44.574] (II) No input driver specified, ignoring this device.
[    44.574] (II) This device may have been added with another device file.
[    44.574] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event15)
[    44.574] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    44.574] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    44.574] (**) Eee PC WMI hotkeys: always reports core events
[    44.574] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event15"
[    44.574] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    44.574] (--) evdev: Eee PC WMI hotkeys: Found keys
[    44.574] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    44.574] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input18/event15"
[    44.574] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[    44.574] (**) Option "xkb_rules" "evdev"
[    44.574] (**) Option "xkb_model" "pc105"
[    44.574] (**) Option "xkb_layout" "fr"
[    44.574] (**) Option "xkb_variant" "oss"
[    59.503] resize called 2640 1080

Dernière modification par emena (Le 17/06/2017, à 20:25)


Ubuntu 20.04.4 LTS

Hors ligne

#2 Le 05/06/2017, à 21:20

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Bonjour, génère un rapport bisnext, vois la procédure ici https://doc.ubuntu-fr.org/bisnext#insta … onome_live

Hors ligne

#3 Le 05/06/2017, à 21:43

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Hello,

Merci de me répondre, le voici
EM


May 20 2017, bisnext report id 0e6fb also available at https://paste.debian.net/933346/

                                 bisnext 0.02


============================ Hardware and System Summary ======================

System:    Kernel: 4.4.0-78-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine:   Device: desktop Mobo: ASUSTeK model: B150M-A/M.2 v: Rev X.0x
           UEFI [Legacy]: American Megatrends v: 0403 date: 05/06/2016
Battery    No battery data found in /sys or dmidecode. Is one present?
CPU:       Quad core Intel Core i5-6400 (-MCP-) cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21696
           clock speeds: min/max: 800/3300 MHz 1: 799 MHz 2: 800 MHz
           3: 799 MHz 4: 799 MHz
Memory:    Array-1 capacity: 64 GB devices: 4 EC: None
           Device-1: DIMM_A1 size: 4 GB speed: 2133 MHz type: DDR4
           manufacturer: Kingston part: KHX2133C14D4/4G
           Device-2: DIMM_A2 size: No Module Installed type: N/A
           Device-3: DIMM_B1 size: 4 GB speed: 2133 MHz type: DDR4
           manufacturer: Kingston part: KHX2133C14D4/4G
           Device-4: DIMM_B2 size: No Module Installed type: N/A
Graphics:  Card-1: Intel Sky Lake Integrated Graphics
           bus-ID: 00:02.0 chip-ID: 8086:1912
           Card-2: NVIDIA NV41 [GeForce 6800 XT]
           bus-ID: 01:00.0 chip-ID: 10de:00c3
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: modesetting,fbdev,vesa) FAILED: intel
           tty size: 1920x1080@60.00hz, 720x576@50.00hz
           GLX Renderer: Gallium 0.4 on NV41
           GLX Version: 2.1 Mesa 12.0.6 Direct Rendering: Yes
Audio:     Card Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
           Sound: Advanced Linux Sound Architecture v: k4.4.0-78-generic
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000
           bus-ID: 02:00.0 chip-ID: 10ec:8168
           IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2000.4GB (60.9% used)
           ID-1: /dev/sda model: WDC_WD10EZEX size: 1000.2GB
          
           ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB
          
           Optical: /dev/sr0 model: ASUS BC-12D2HT
           rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 1x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 910G used: 589G (69%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: d110c13f-1323-4921-bfc6-b4554137d3a0
           ID-2: /mnt/4270806b-d664-417b-9732-e9ca96433ea9 size: 917G used: 539G (62%) fs: ext4 dev: /dev/sdb1
           label: home_ano_q uuid: 4270806b-d664-417b-9732-e9ca96433ea9
           ID-3: swap-1 size: 8.43GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
           label: N/A uuid: e482e773-c2c6-4361-b945-121067188f53
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   None detected - is lm-sensors installed and configured?
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://be.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://be.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://be.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
           deb http://be.archive.ubuntu.com/ubuntu/ xenial-updates restricted universe main multiverse
           deb http://be.archive.ubuntu.com/ubuntu/ xenial-backports multiverse restricted universe main
           Active apt sources in file: /etc/apt/sources.list.d/ancestris-ubuntu-ancestris-8-0-xenial.list
           deb http://ppa.launchpad.net/ancestris/ancestris-8-0/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/danielrichter2007-ubuntu-grub-customizer-xenial.list
           deb http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/eid.list
           deb http://files.eid.belgium.be/debian xenial main
           deb http://files2.eid.belgium.be/debian xenial main
           Active apt sources in file: /etc/apt/sources.list.d/jtaylor-ubuntu-keepass-xenial.list
           deb http://ppa.launchpad.net/jtaylor/keepass/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/mscore-ubuntu-ubuntu-mscore-stable-xenial.list
           deb http://ppa.launchpad.net/mscore-ubuntu/mscore-stable/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/tails-team-ubuntu-tails-installer-xenial.list
           deb http://ppa.launchpad.net/tails-team/tails-installer/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/videolan-ubuntu-stable-daily-xenial.list
           deb http://ppa.launchpad.net/videolan/stable-daily/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-ubuntu-boot-repair-xenial.list
           deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 11.4% command: firefox pid: 1953 mem: 351.12MB (4.4%)
           2: cpu: 2.3% command: Xorg pid: 981 mem: 63.77MB (0.8%)
           3: cpu: 2.2% command: compiz pid: 1533 mem: 104.59MB (1.3%)
           4: cpu: 1.0% command: bash pid: 2709 mem: 4.31MB (0.0%)
           5: cpu: 0.8% command: gnome-terminal-server pid: 2183 mem: 34.60MB (0.4%)
           6: cpu: 0.7% command: gnome-software pid: 1700 mem: 87.70MB (1.1%)
           7: cpu: 0.3% command: AgentAntidote.bin pid: 1709 mem: 194.27MB (2.4%)
           8: cpu: 0.3% command: init pid: 1 mem: 5.63MB (0.0%)
           9: cpu: 0.2% command: fwupd pid: 1845 mem: 33.52MB (0.4%)
           10: cpu: 0.2% command: mysqld pid: 960 mem: 163.00MB (2.0%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 351.12MB (4.4%) command: firefox pid: 1953 cpu: 11.4%
           2: mem: 194.27MB (2.4%) command: AgentAntidote.bin pid: 1709 cpu: 0.3%
           3: mem: 163.00MB (2.0%) command: mysqld pid: 960 cpu: 0.2%
           4: mem: 104.59MB (1.3%) command: compiz pid: 1533 cpu: 2.2%
           5: mem: 87.70MB (1.1%) command: gnome-software pid: 1700 cpu: 0.7%
           6: mem: 66.29MB (0.8%) command: libflashplayer.so (started by: plugin-container) pid: 2022 cpu: 0.0%
           7: mem: 63.77MB (0.8%) command: Xorg pid: 981 cpu: 2.3%
           8: mem: 58.16MB (0.7%) command: evolution-calendar-factory pid: 1682 cpu: 0.0%
           9: mem: 52.28MB (0.6%) command: unity-panel-service pid: 1483 cpu: 0.0%
           10: mem: 51.32MB (0.6%) command: evolution-calendar-factory-subprocess pid: 1732 cpu: 0.0%
Info:      Processes: 230 Uptime: 4 min Memory: 1310.8/7832.5MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.8


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.




========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => libparted MBR boot code is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,937,055,743 1,937,053,696  83 Linux
/dev/sda2       1,937,057,790 1,953,523,711    16,465,922   5 Extended
/dev/sda5       1,937,057,792 1,953,523,711    16,465,920  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048 1,953,523,711 1,953,521,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        d110c13f-1323-4921-bfc6-b4554137d3a0   ext4       
/dev/sda5        e482e773-c2c6-4361-b945-121067188f53   swap       
/dev/sdb1        4270806b-d664-417b-9732-e9ca96433ea9   ext4       home_ano_q

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 mai 20 14:51 ata-ASUS_BC-12D2HT_K9DF5M92707 -> ../../sr0
lrwxrwxrwx 1 root root  9 mai 20 14:51 ata-WDC_WD10EZEX-00WN4A0_WD-WCC6Y0UTTZJN -> ../../sdb
lrwxrwxrwx 1 root root 10 mai 20 14:51 ata-WDC_WD10EZEX-00WN4A0_WD-WCC6Y0UTTZJN-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 mai 20 14:51 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ -> ../../sda
lrwxrwxrwx 1 root root 10 mai 20 14:51 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 20 14:51 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 20 14:51 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 mai 20 14:51 wwn-0x50014ee20dcca2da -> ../../sda
lrwxrwxrwx 1 root root 10 mai 20 14:51 wwn-0x50014ee20dcca2da-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai 20 14:51 wwn-0x50014ee20dcca2da-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai 20 14:51 wwn-0x50014ee20dcca2da-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 mai 20 14:51 wwn-0x50014ee2629cb26a -> ../../sdb
lrwxrwxrwx 1 root root 10 mai 20 14:51 wwn-0x50014ee2629cb26a-part1 -> ../../sdb1

________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda1        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1        /mnt/4270806b-d664-417b-9732-e9ca96433ea9            ext4 (rw,nosuid,nodev,relatime,data=ordered)





__________________________=== Boot Files Content ===___________________________


___________________________ sda1/boot/grub/grub.cfg: ___________________________

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d110c13f-1323-4921-bfc6-b4554137d3a0' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d110c13f-1323-4921-bfc6-b4554137d3a0
	else
	  search --no-floppy --fs-uuid --set=root d110c13f-1323-4921-bfc6-b4554137d3a0
	fi
        linux	/boot/vmlinuz-4.4.0-78-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro  
	initrd	/boot/initrd.img-4.4.0-78-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d110c13f-1323-4921-bfc6-b4554137d3a0
	else
	  search --no-floppy --fs-uuid --set=root d110c13f-1323-4921-bfc6-b4554137d3a0
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d110c13f-1323-4921-bfc6-b4554137d3a0
	else
	  search --no-floppy --fs-uuid --set=root d110c13f-1323-4921-bfc6-b4554137d3a0
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda1/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=e482e773-c2c6-4361-b945-121067188f53 none            swap    sw              0       0
/dev/disk/by-id/wwn-0x50025388a02504d2 /mnt/wwn-0x50025388a02504d2 auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-uuid/4270806b-d664-417b-9732-e9ca96433ea9 /mnt/4270806b-d664-417b-9732-e9ca96433ea9 auto nosuid,nodev,nofail,x-gvfs-show 0 0

____________________________ sda1/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=30										#	amh --- 
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
#												amh --- GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.4.0-78-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro


______________________________ Boot-up Statistics ______________________________

Startup finished in 10.597s (kernel) + 1min 32.049s (userspace) = 1min 42.646s


blame, first 10:
mysql.service                       51.043s
NetworkManager-wait-online.service  15.380s
ModemManager.service                12.207s
lightdm.service                     11.856s
dev-sda1.device                     6.929s
apparmor.service                    4.835s
NetworkManager.service              4.830s
apache2.service                     4.639s
accounts-daemon.service             2.666s
thermald.service                    2.652s


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @1min 7.090s
  2 multi-user.target @1min 7.090s
  3 mysql.service @16.046s +51.043s
  4 network.target @16.037s
  5 NetworkManager.service @11.206s +4.830s
  6 dbus.service @10.120s
  7 basic.target @10.021s
  8 sockets.target @10.021s
  9 snapd.socket @9.939s +76ms
 10 sysinit.target @9.906s
 11 apparmor.service @5.071s +4.835s
 12 local-fs.target @4.995s
 13 run-user-1000-gvfs.mount @36.761s
 14 run-user-1000.mount @29.713s
 15 local-fs-pre.target @4.994s
 16 systemd-remount-fs.service @4.870s +103ms
 17 systemd-journald.socket @1.838s
 18 -.slice @1.733s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           7.6G        1.2G        5.3G         50M        1.1G        6.1G
Swap:          7.9G          0B        7.9G
Swappiness = 60

Filesystem     Mounted on                                Type  Size  Used Avail Use% IUse%
/dev/sda1      /                                         ext4  910G  589G  275G  69%    2%
/dev/sdb1      /mnt/4270806b-d664-417b-9732-e9ca96433ea9 ext4  917G  539G  335G  62%    1%

Swap partition for hibernation : UUID=e482e773-c2c6-4361-b945-121067188f53


_________________________________ USB devices __________________________________

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 005: ID 046d:c316 Logitech, Inc. HID-Compliant Keyboard
Bus 001 Device 004: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 003: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 5: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 6: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
    |__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/7p, 480M
        |__ Port 1: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 1: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 5: Dev 6, If 0, Class=Hub, Driver=hub/7p, 480M


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
8250_fintek            16384  0
ablk_helper            16384  1 aesni_intel
acpi_als               16384  0
acpi_pad               24576  0
aesni_intel           167936  0
aes_x86_64             20480  1 aesni_intel
ahci                   36864  3
asus_wmi               28672  1 eeepc_wmi
autofs4                40960  2
binfmt_misc            20480  1
bluetooth             520192  9 bnep,btbcm,btqca,hci_uart,btintel
bnep                   20480  2
btbcm                  16384  1 hci_uart
btintel                16384  1 hci_uart
btqca                  16384  1 hci_uart
btrfs                 987136  0
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 20480  3 ghash_clmulni_intel,aesni_intel,ablk_helper
drm                   364544  12 ttm,i915_bpo,drm_kms_helper,nouveau
drm_kms_helper        155648  2 i915_bpo,nouveau
eeepc_wmi              16384  0
fb_sys_fops            16384  1 drm_kms_helper
fjes                   28672  0
gf128mul               16384  1 lrw
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hci_uart               77824  0
hfs                    57344  0
hfsplus               106496  0
hid                   118784  3 i2c_hid,hid_generic,usbhid
hid_generic            16384  0
i2c_algo_bit           16384  2 i915_bpo,nouveau
i2c_hid                20480  0
i915_bpo             1302528  2
industrialio           61440  2 acpi_als,kfifo_buf
input_leds             16384  0
intel_ips              20480  1 i915_bpo
intel_lpss             16384  1 intel_lpss_acpi
intel_lpss_acpi        16384  0
intel_powerclamp       16384  0
intel_rapl             20480  0
irqbypass              16384  1 kvm
jfs                   180224  0
kfifo_buf              16384  1 acpi_als
kvm                   544768  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
lrw                    16384  1 aesni_intel
mac_hid                16384  0
mei                    98304  1 mei_me
mei_me                 36864  0
mii                    16384  1 r8169
minix                  36864  0
msdos                  20480  0
mxm_wmi                16384  1 nouveau
nouveau              1495040  7
ntfs                   98304  0
parport                49152  3 lp,ppdev,parport_pc
parport_pc             32768  1
pinctrl_intel          20480  1 pinctrl_sunrisepoint
pinctrl_sunrisepoint    28672  0
ppdev                  20480  0
psmouse               131072  0
qnx4                   16384  0
r8169                  81920  0
raid6_pq              102400  1 btrfs
serio_raw              16384  0
shpchp                 36864  0
snd                    81920  17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     53248  1
snd_hda_codec_realtek    86016  1
snd_hda_core           73728  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel          40960  3
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
soundcore              16384  1 snd
sparse_keymap          16384  1 asus_wmi
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
ttm                    94208  1 nouveau
ufs                    73728  0
usbhid                 49152  0
video                  40960  3 i915_bpo,nouveau,asus_wmi
wmi                    20480  3 mxm_wmi,nouveau,asus_wmi
x86_pkg_temp_thermal    16384  0
xfs                   970752  0
xor                    24576  1 btrfs


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free

== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd000000C3sv00003842sd0000C381bc03sc00i00
model    : NV41 [GeForce 6800 XT]
vendor   : NVIDIA Corporation
driver   : xserver-xorg-video-nouveau - distro free builtin
driver   : nvidia-304 - distro non-free recommended



__________________________________ Locales ___________________________________

locale command output:
LANG=fr_BE.UTF-8
LANGUAGE=fr_BE:fr
LC_CTYPE="fr_BE.UTF-8"
LC_NUMERIC="fr_BE.UTF-8"
LC_TIME="fr_BE.UTF-8"
LC_COLLATE="fr_BE.UTF-8"
LC_MONETARY="fr_BE.UTF-8"
LC_MESSAGES="fr_BE.UTF-8"
LC_PAPER="fr_BE.UTF-8"
LC_NAME="fr_BE.UTF-8"
LC_ADDRESS="fr_BE.UTF-8"
LC_TELEPHONE="fr_BE.UTF-8"
LC_MEASUREMENT="fr_BE.UTF-8"
LC_IDENTIFICATION="fr_BE.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_BE.UTF-8"
LANGUAGE="fr_BE:fr"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr,us
variant:    oss,

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

gir1.2-unity-5.0                    7.1.4+16.04.2016070 from:7.1.4+15.10.2015100
gnome-software                      3.20.1+git20170427. from:3.20.1+git20170208.
gnome-software-common               3.20.1+git20170427. from:3.20.1+git20170208.
libunity-scopes-json-def-desktop    7.1.4+16.04.2016070 from:7.1.4+15.10.2015100
ubuntu-software                     3.20.1+git20170427. from:3.20.1+git20170208.
unattended-upgrades                 0.90ubuntu0.6       from:0.90ubuntu0.5      
unity-scopes-runner                 7.1.4+16.04.2016070 from:7.1.4+15.10.2015100


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  linux-headers-4.4.0-63 linux-headers-4.4.0-63-generic linux-headers-4.4.0-64
  linux-headers-4.4.0-64-generic linux-headers-4.4.0-66
  linux-headers-4.4.0-66-generic linux-headers-4.4.0-70
  linux-headers-4.4.0-70-generic linux-headers-4.4.0-71
  linux-headers-4.4.0-71-generic linux-headers-4.4.0-72
  linux-headers-4.4.0-72-generic linux-headers-4.4.0-75
  linux-headers-4.4.0-75-generic linux-image-4.4.0-63-generic
  linux-image-4.4.0-64-generic linux-image-4.4.0-66-generic
  linux-image-4.4.0-70-generic linux-image-4.4.0-71-generic
  linux-image-4.4.0-72-generic linux-image-4.4.0-75-generic
  linux-image-extra-4.4.0-63-generic linux-image-extra-4.4.0-64-generic
  linux-image-extra-4.4.0-66-generic linux-image-extra-4.4.0-70-generic
  linux-image-extra-4.4.0-71-generic linux-image-extra-4.4.0-72-generic
  linux-image-extra-4.4.0-75-generic
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 7 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
linux-image-4.4.0-21-generic        4.4.0-21.37
linux-image-4.4.0-62-generic        4.4.0-62.83
linux-image-extra-4.4.0-21-generic  4.4.0-21.37
linux-image-extra-4.4.0-62-generic  4.4.0-62.83
ubuntu-core-launcher                2.22.2


Use the following command to clean old configuration files:
sudo apt purge linux-image-4.4.0-21-generic linux-image-4.4.0-62-generic linux-image-extra-4.4.0-21-generic linux-image-extra-4.4.0-62-generic ubuntu-core-launcher


_________________________ Kernel Packages Installed __________________________

Package                             Version
linux-generic                       4.4.0.78.84
linux-headers-4.4.0-63              4.4.0-63.84
linux-headers-4.4.0-63-generic      4.4.0-63.84
linux-headers-4.4.0-64              4.4.0-64.85
linux-headers-4.4.0-64-generic      4.4.0-64.85
linux-headers-4.4.0-66              4.4.0-66.87
linux-headers-4.4.0-66-generic      4.4.0-66.87
linux-headers-4.4.0-70              4.4.0-70.91
linux-headers-4.4.0-70-generic      4.4.0-70.91
linux-headers-4.4.0-71              4.4.0-71.92
linux-headers-4.4.0-71-generic      4.4.0-71.92
linux-headers-4.4.0-72              4.4.0-72.93
linux-headers-4.4.0-72-generic      4.4.0-72.93
linux-headers-4.4.0-75              4.4.0-75.96
linux-headers-4.4.0-75-generic      4.4.0-75.96
linux-headers-4.4.0-77              4.4.0-77.98
linux-headers-4.4.0-77-generic      4.4.0-77.98
linux-headers-4.4.0-78              4.4.0-78.99
linux-headers-4.4.0-78-generic      4.4.0-78.99
linux-headers-generic               4.4.0.78.84
linux-image-4.4.0-63-generic        4.4.0-63.84
linux-image-4.4.0-64-generic        4.4.0-64.85
linux-image-4.4.0-66-generic        4.4.0-66.87
linux-image-4.4.0-70-generic        4.4.0-70.91
linux-image-4.4.0-71-generic        4.4.0-71.92
linux-image-4.4.0-72-generic        4.4.0-72.93
linux-image-4.4.0-75-generic        4.4.0-75.96
linux-image-4.4.0-77-generic        4.4.0-77.98
linux-image-4.4.0-78-generic        4.4.0-78.99
linux-image-extra-4.4.0-63-generic  4.4.0-63.84
linux-image-extra-4.4.0-64-generic  4.4.0-64.85
linux-image-extra-4.4.0-66-generic  4.4.0-66.87
linux-image-extra-4.4.0-70-generic  4.4.0-70.91
linux-image-extra-4.4.0-71-generic  4.4.0-71.92
linux-image-extra-4.4.0-72-generic  4.4.0-72.93
linux-image-extra-4.4.0-75-generic  4.4.0-75.96
linux-image-extra-4.4.0-77-generic  4.4.0-77.98
linux-image-extra-4.4.0-78-generic  4.4.0-78.99
linux-image-generic                 4.4.0.78.84


File list in /boot directory:
abi-4.4.0-63-generic
abi-4.4.0-64-generic
abi-4.4.0-66-generic
abi-4.4.0-70-generic
abi-4.4.0-71-generic
abi-4.4.0-72-generic
abi-4.4.0-75-generic
abi-4.4.0-77-generic
abi-4.4.0-78-generic
config-4.4.0-63-generic
config-4.4.0-64-generic
config-4.4.0-66-generic
config-4.4.0-70-generic
config-4.4.0-71-generic
config-4.4.0-72-generic
config-4.4.0-75-generic
config-4.4.0-77-generic
config-4.4.0-78-generic
grub
initrd.img-4.4.0-63-generic
initrd.img-4.4.0-64-generic
initrd.img-4.4.0-66-generic
initrd.img-4.4.0-70-generic
initrd.img-4.4.0-71-generic
initrd.img-4.4.0-72-generic
initrd.img-4.4.0-75-generic
initrd.img-4.4.0-77-generic
initrd.img-4.4.0-78-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-63-generic
System.map-4.4.0-64-generic
System.map-4.4.0-66-generic
System.map-4.4.0-70-generic
System.map-4.4.0-71-generic
System.map-4.4.0-72-generic
System.map-4.4.0-75-generic
System.map-4.4.0-77-generic
System.map-4.4.0-78-generic
vmlinuz-4.4.0-63-generic
vmlinuz-4.4.0-64-generic
vmlinuz-4.4.0-66-generic
vmlinuz-4.4.0-70-generic
vmlinuz-4.4.0-71-generic
vmlinuz-4.4.0-72-generic
vmlinuz-4.4.0-75-generic
vmlinuz-4.4.0-77-generic
vmlinuz-4.4.0-78-generic


________________________ Kernel Candidates for Removal ________________________

At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !

kernel versions kept:
4.4.0-78-generic (running kernel)
4.4.0-77-generic

kernel candidates for removal:
4.4.0-63-generic 4.4.0-64-generic 4.4.0-66-generic 4.4.0-70-generic 4.4.0-71-generic 4.4.0-72-generic 4.4.0-75-generic

Command to run in a terminal to purge the packages from the system:

sudo apt purge  linux-headers-4.4.0-63 linux-headers-4.4.0-63-generic linux-image-4.4.0-63-generic linux-image-extra-4.4.0-63-generic   linux-headers-4.4.0-64 linux-headers-4.4.0-64-generic linux-image-4.4.0-64-generic linux-image-extra-4.4.0-64-generic   linux-headers-4.4.0-66 linux-headers-4.4.0-66-generic linux-image-4.4.0-66-generic linux-image-extra-4.4.0-66-generic   linux-headers-4.4.0-70 linux-headers-4.4.0-70-generic linux-image-4.4.0-70-generic linux-image-extra-4.4.0-70-generic   linux-headers-4.4.0-71 linux-headers-4.4.0-71-generic linux-image-4.4.0-71-generic linux-image-extra-4.4.0-71-generic   linux-headers-4.4.0-72 linux-headers-4.4.0-72-generic linux-image-4.4.0-72-generic linux-image-extra-4.4.0-72-generic   linux-headers-4.4.0-75 linux-headers-4.4.0-75-generic linux-image-4.4.0-75-generic linux-image-extra-4.4.0-75-generic  

_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.000000] ACPI: UEFI 0x00000000A8FC9618 000042 (v01                 00000000      00000000)
[    0.025106] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150930/dswload-210)
[    0.025114] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150930/psobject-227)
[    0.025160] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20150930/tbxfload-193)
[    0.032872] ACPI Error: 1 table load failures, 8 successful (20150930/tbxfload-214)
[    0.156084] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.165297] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.183230] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.202475] SCSI subsystem initialized
[    0.723335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.032766] scsi host0: ahci
[    1.033179] scsi host1: ahci
[    1.033709] scsi host2: ahci
[    1.034229] scsi host3: ahci
[    1.034757] scsi host4: ahci
[    1.035447] scsi host5: ahci
[    1.036762] [drm:i915_gem_init_stolen [i915_bpo]] *ERROR* conflict detected with stolen region: [0xb4000000 - 0xb8000000]
[    1.355851] ata4: SATA link down (SStatus 4 SControl 300)
[    1.359849] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.359892] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.359912] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.362061] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    1.362556] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.362597] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.363060] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[    1.363315] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.363317] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.363735] ata5: SATA link down (SStatus 4 SControl 300)
[    1.363815] ata3: SATA link down (SStatus 4 SControl 300)
[    1.368744] scsi 5:0:0:0: CD-ROM            ASUS     BC-12D2HT        1.00 PQ: 0 ANSI: 5
[    1.378836] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.391349] sr 5:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.391545] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.391670] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.439230] sd 0:0:0:0: [sda] Attached SCSI disk
[   15.562873] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.306046] audit: type=1400 audit(1495284668.896:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=680 comm="apparmor_parser"
[   20.316872] audit: type=1400 audit(1495284668.908:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=677 comm="apparmor_parser"
[   20.316877] audit: type=1400 audit(1495284668.908:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=677 comm="apparmor_parser"
[   20.316879] audit: type=1400 audit(1495284668.908:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=677 comm="apparmor_parser"
[   20.316882] audit: type=1400 audit(1495284668.908:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=677 comm="apparmor_parser"
[   20.333977] audit: type=1400 audit(1495284668.924:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=676 comm="apparmor_parser"
[   20.333981] audit: type=1400 audit(1495284668.924:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=676 comm="apparmor_parser"
[   20.373364] audit: type=1400 audit(1495284668.964:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=682 comm="apparmor_parser"
[   20.373369] audit: type=1400 audit(1495284668.964:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=682 comm="apparmor_parser"
[   20.374431] audit: type=1400 audit(1495284668.964:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=683 comm="apparmor_parser"
[   34.468027] audit: type=1400 audit(1495284683.060:26): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/960/status" pid=960 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=121 ouid=121
[   34.468088] audit: type=1400 audit(1495284683.060:28): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/960/status" pid=960 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=121 ouid=121


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)	id=10	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ Logitech Logitech USB Keyboard          	id=11	[slave  keyboard (3)]
    ↳ Logitech Logitech USB Keyboard          	id=12	[slave  keyboard (3)]
    ↳ Eee PC WMI hotkeys                      	id=13	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 320 x 200, current 2640 x 1080, maximum 4096 x 4096
VGA-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
   1920x1080     60.00*+
   1600x1200     60.00  
   1680x1050     59.95  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.89  
   1280x960      60.00  
   1280x800      59.81  
   1152x864      75.00  
   1024x768      75.08    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    72.81    66.67    60.00  
   720x400       70.08  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-1 connected 720x576+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm
   720x576       50.00*+
   1024x768      50.00  
   800x600       50.00  
   720x480       50.00  
   640x480       50.00  
   400x300       50.00  
   320x240       50.00  
   320x200       50.00  
DP1 disconnected
HDMI1 disconnected
HDMI2 disconnected
VIRTUAL1 disconnected


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    35.128] (==) No Layout section.  Using the first Screen section.
[    35.128] (==) No screen section available. Using defaults.
[    35.128] (**) |-->Screen "Default Screen Section" (0)
[    35.128] (**) |   |-->Monitor "<default monitor>"
[    35.128] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    35.131] (--) PCI: (0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xf4000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    35.131] (--) PCI:*(0:1:0:0) 10de:00c3:3842:c381 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf5000000/16777216, BIOS @ 0x????????/131072
[    35.131] (II) LoadModule: "glx"
[    35.205] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    35.901] (II) LoadModule: "nvidia"
[    35.901] (WW) Warning, couldn't open module nvidia
[    35.901] (II) UnloadModule: "nvidia"
[    35.901] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    35.901] (II) LoadModule: "nouveau"
[    35.901] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    36.009] (II) LoadModule: "intel"
[    36.009] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    36.158] (II) LoadModule: "modesetting"
[    36.159] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    36.159] (II) LoadModule: "fbdev"
[    36.159] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    36.159] (II) LoadModule: "vesa"
[    36.159] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    36.159] (II) LoadModule: "nvidia"
[    36.159] (WW) Warning, couldn't open module nvidia
[    36.159] (II) UnloadModule: "nvidia"
[    36.159] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    36.159] (II) LoadModule: "nouveau"
[    36.159] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    36.159] (II) UnloadModule: "nouveau"
[    36.159] (II) LoadModule: "intel"
[    36.159] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    36.159] (II) UnloadModule: "intel"
[    36.159] (II) LoadModule: "modesetting"
[    36.159] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    36.159] (II) UnloadModule: "modesetting"
[    36.159] (II) LoadModule: "fbdev"
[    36.159] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    36.159] (II) UnloadModule: "fbdev"
[    36.159] (II) LoadModule: "vesa"
[    36.159] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    36.159] (II) UnloadModule: "vesa"
[    36.204] (WW) Falling back to old probe method for modesetting
[    36.204] (WW) Falling back to old probe method for fbdev
[    36.204] (II) Loading sub module "fbdevhw"
[    36.204] (II) LoadModule: "fbdevhw"
[    36.204] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    36.252] (WW) Falling back to old probe method for vesa
[    36.252] (II) Loading sub module "dri2"
[    36.252] (II) LoadModule: "dri2"
[    36.252] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    36.281] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    36.308] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    36.336] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    36.336] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    36.336] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    36.336] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    36.365] (II) NOUVEAU(0): Monitor name: SyncMaster
[    36.420] (II) Loading sub module "fb"
[    36.420] (II) LoadModule: "fb"
[    36.420] (II) Loading /usr/lib/xorg/modules/libfb.so
[    36.444] (II) Loading sub module "shadowfb"
[    36.444] (II) LoadModule: "shadowfb"
[    36.444] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    36.470] (II) intel(G0): Output HDMI1 has no monitor section
[    36.470] (II) intel(G0): Output HDMI2 has no monitor section
[    36.470] (II) intel(G0): Output DP1 has no monitor section
[    36.470] (II) intel(G0): Output VIRTUAL1 has no monitor section
[    36.470] (II) Loading sub module "dri2"
[    36.470] (II) LoadModule: "dri2"
[    36.470] (II) Loading sub module "present"
[    36.470] (II) LoadModule: "present"
[    36.470] (II) UnloadModule: "modesetting"
[    36.470] (II) UnloadModule: "fbdev"
[    36.470] (II) UnloadModule: "vesa"
[    36.674] (II) Loading sub module "exa"
[    36.674] (II) LoadModule: "exa"
[    36.674] (II) Loading /usr/lib/xorg/modules/libexa.so
[    36.729] (II) EXA(0): Driver allocated offscreen pixmaps
[    36.729] (II)         UploadToScreen
[    36.729] (II)         DownloadFromScreen
[    39.612] (II) GLX: Initialized DRI2 GL provider for screen 0
[    39.615] (II) NOUVEAU(0): Setting screen physical size to 698 x 285
[    39.918] (II) LoadModule: "evdev"
[    39.919] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-78-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-78-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? yes
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:1912
BusID "PCI:0@0:2:0"
Is boot vga? no
Vendor/Device Id: 10de:c3
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915_bpo"
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915_bpo"
Found "/dev/dri/card1", driven by "nouveau"
output 0:
	card1-VGA-1
output 1:
	card1-TV-1
Number of connected outputs for /dev/dri/card1: 2
Skipping "/dev/dri/card1", driven by "nouveau"
Found "/dev/dri/card0", driven by "i915_bpo"
Number of connected outputs for /dev/dri/card0: 0
Does it require offloading? no
last cards number = 2
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no


============================ Disks SMART Attributes ===========================



### ATA disks: sda sdb

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-78-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20dcca2da
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat May 20 14:55:37 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   178   172   021    -    2058
  4 Start_Stop_Count        -O--CK   100   100   000    -    127
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    178
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    127
192 Power-Off_Retract_Count -O--CK   200   200   000    -    46
193 Load_Cycle_Count        -O--CK   200   200   000    -    180
194 Temperature_Celsius     -O---K   109   101   000    -    34
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-78-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-00WN4A0
LU WWN Device Id: 5 0014ee 2629cb26a
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat May 20 14:55:37 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   176   170   021    -    2158
  4 Start_Stop_Count        -O--CK   100   100   000    -    250
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    499
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    250
192 Power-Off_Retract_Count -O--CK   200   200   000    -    80
193 Load_Cycle_Count        -O--CK   200   200   000    -    606
194 Temperature_Celsius     -O---K   110   103   000    -    33
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

Ubuntu 20.04.4 LTS

Hors ligne

#4 Le 05/06/2017, à 22:06

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

C'est le grand écart entre le couple carte mère / processeur et la carte graphique datée. Xorg utilise par défaut la carte graphique dédiée Nvidia, je te conseille d'utiliser la puce graphique Intel intégrée au processeur récente.

Le fichier de config de grub est mauvais, reprends celui par défaut d'origine :

sudo cp /usr/share/grub/default/grub /etc/default

Télécharge les derniers linux-firmware disponibles et installe :

wget http://fr.archive.ubuntu.com/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.165_all.deb
sudo dpkg -i linux-firmware_1.165_all.deb

Installe le dernier noyau hwe-edge disponible :

sudo apt install linux-generic-hwe-16.04-edge

Empêche le pilote de carte graphique Nvidia de charger, utilise copier coller pour éviter les erreurs de saisie :

sudo sed -i 's/quiet splash/& modprobe.blacklist=nouveau/' /etc/default/grub

Mets à jour grub :

sudo update-grub

Et redémarre.

Refait un rapport bisnext ensuite.

Hors ligne

#5 Le 06/06/2017, à 07:24

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Hello,

Et bien, j'ai quelques nettoyage à faire !

Juste ne soit pas surpris, je vais mettre le grub par défaut, mais je vais denouveau supprimer le quiet, car quand j'attends, me demandant s'il bloque ou pas, les traces sont bienvenues.

Je peux aussi supprimer la carte NVDIA si elle pose problème, je l'ai gardée ne sachant pas si celle de la carte mère était mieux ou moins bien.

Je ferais tout ça en rentrant du travail, je te dis quoi

Bonne journée
EM

Dernière modification par emena (Le 06/06/2017, à 07:27)


Ubuntu 20.04.4 LTS

Hors ligne

#6 Le 06/06/2017, à 19:30

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Panique à bord,
yikes yikes
J'ai fais ce que tu m'as dit, je n'arrive pas à booter
J'ai pris une disquette d'installation, idem.
Par contre, si je retourne sur la carte Nvidia, ma disquette d'installation  boot.

J'ai fais l'erreur de ne pas enlever le quiet, je ne sais donc pas où ça coince.
Je pourrais changer le grub, mais comment faire un grub update ?

J'espère que vous pour m'aider
EM


Ubuntu 20.04.4 LTS

Hors ligne

#7 Le 06/06/2017, à 19:40

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Que signifie "si je retourne sur la carte Nvidia" ? Tu fais ça comment ?

Maintiens la touche shift enfoncée au démarrage, le menu grub apparaît ?

Edite avec la touche "e" la première ligne du menu, et enlève "quiet splash", touche F10 ensuite pour démarrer.

Tu peux aussi enlever "modprobe.blacklist=nouveau" pour que xorg utilise la carte nvidia.

Sinon génère un rapport bisnext, vois la procédure ici
https://doc.ubuntu-fr.org/bisnext#insta … onome_live

Hors ligne

#8 Le 06/06/2017, à 20:29

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Hello,

Oups, Je m'étais trompée, dans mon message. Ma bécane tournait avec l'écran branché sur la carte Nvidia, j'ai donc changé pour être en cohérence avec ce que tu m'avais suggéré.

En branchant mon écran sur la carte graphique de la carte mère, quand je tente de booter sur mon disque, je coince sur la mire Ubuntu, je n'ai pas le défilé des petit points, et je n'arrive jamais au menu grub, même avec la touche shift enfoncé. J'ai fais l'essais tout à l'heure, en demi heure, il n'a pas avancé

C'est la même chose avec ma disquette d'installation. Je me suis dis que le probleme pouvait venir de la carte graphique de la carte mère. Mais on ne peut plus retourner sur cette carte avec le grub du disque.

Alors, j'ai fais l'essais avec avec ma disquette d'installation, et en branchant l'écran sur la carte nvidia, j'arrive au menu grub puis au bureau.

Je peux faire la modif du grub en bootant sur la disquette d'installation, c'est facile, mais alors comment faire le grub update.

Dans les forums je vois des procédures avec un boote repair, est-ce que cela irait ?

merci d'avance
EM


Ubuntu 20.04.4 LTS

Hors ligne

#9 Le 06/06/2017, à 21:12

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Oui fais un boot repair, vois la procédure ici https://doc.ubuntu-fr.org/tutoriel/boot … ion_ubuntu

Au démarrage suivant tu devrais avoir le menu grub, tu peux éditer la ligne comme indiqué, ou encore sélectionner un autre noyau pour démarrer, vois le sous menu grub Options avancées (de mémoire).

Hors ligne

#10 Le 07/06/2017, à 21:10

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

hello,

Me revoilà.
j'ai  fait un boot repair, je peux relancer une session.
Mais quand j'arrive sur le bureau il me signale une erreur, un problème avec les cartes, malheureusement il n'y a pas moyen de copier les dérails, je te mets un dmseg


dmesg
[    0.000000] Linux version 4.10.0-22-generic (buildd@lgw01-21) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #24~16.04.1-Ubuntu SMP Tue May 23 17:03:51 UTC 2017 (Ubuntu 4.10.0-22.24~16.04.1-generic 4.10.15)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a8f9bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a8f9c000-0x00000000a8fcafff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000a8fcb000-0x00000000aabf3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aabf4000-0x00000000aabf4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aabf5000-0x00000000aac1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aac1f000-0x00000000b0765fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b0766000-0x00000000b1e46fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b1e47000-0x00000000b1e69fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b1e6a000-0x00000000b2065fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b2066000-0x00000000b279efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b279f000-0x00000000b32fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b32ff000-0x00000000b32fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b3300000-0x00000000b5ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000245ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: System manufacturer System Product Name/B150M-A/M.2, BIOS 0403 05/06/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x246000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00B8000000 mask 7FF8000000 uncachable
[    0.000000]   2 base 00B4000000 mask 7FFC000000 uncachable
[    0.000000]   3 base 00B3800000 mask 7FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xb3300 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc50-0x000fcc5f] mapped at [ffff9088000fcc50]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff908800096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x5b028000, 0x5b028fff] PGTABLE
[    0.000000] BRK [0x5b029000, 0x5b029fff] PGTABLE
[    0.000000] BRK [0x5b02a000, 0x5b02afff] PGTABLE
[    0.000000] BRK [0x5b02b000, 0x5b02bfff] PGTABLE
[    0.000000] BRK [0x5b02c000, 0x5b02cfff] PGTABLE
[    0.000000] BRK [0x5b02d000, 0x5b02dfff] PGTABLE
[    0.000000] BRK [0x5b02e000, 0x5b02efff] PGTABLE
[    0.000000] BRK [0x5b02f000, 0x5b02ffff] PGTABLE
[    0.000000] BRK [0x5b030000, 0x5b030fff] PGTABLE
[    0.000000] BRK [0x5b031000, 0x5b031fff] PGTABLE
[    0.000000] BRK [0x5b032000, 0x5b032fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3303a000-0x35814fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000A8F9C0A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000A8FBF598 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000A8F9C1F8 023399 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000B279EF80 000040
[    0.000000] ACPI: APIC 0x00000000A8FBF6A8 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000A8FBF730 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000A8FBF778 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000A8FBF818 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000A8FBF858 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x00000000A8FBF890 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: LPIT 0x00000000A8FBFC00 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000A8FBFC98 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000A8FBFEE0 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000A8FC2A90 000BE3 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000A8FC3678 0004A3 (v02 INTEL  zpodd    00001000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x00000000A8FC3B20 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000A8FC3B58 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000A8FC3BB0 000705 (v02 INTEL  xh_rvp08 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000A8FC42B8 005359 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000A8FC9618 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x00000000A8FC9660 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: ASF! 0x00000000A8FCA530 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000245ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x245fd3000-0x245ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000245ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000a8f9bfff]
[    0.000000]   node   0: [mem 0x00000000a8fcb000-0x00000000aabf3fff]
[    0.000000]   node   0: [mem 0x00000000aac1f000-0x00000000b0765fff]
[    0.000000]   node   0: [mem 0x00000000b1e6a000-0x00000000b2065fff]
[    0.000000]   node   0: [mem 0x00000000b32ff000-0x00000000b32fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000245ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000245ffffff]
[    0.000000] On node 0 totalpages: 2058404
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11237 pages used for memmap
[    0.000000]   DMA32 zone: 719113 pages, LIFO batch:31
[    0.000000]   Normal zone: 20864 pages used for memmap
[    0.000000]   Normal zone: 1335296 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa8f9c000-0xa8fcafff]
[    0.000000] PM: Registered nosave memory: [mem 0xaabf4000-0xaabf4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaabf5000-0xaac1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb0766000-0xb1e46fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb1e47000-0xb1e69fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb2066000-0xb279efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb279f000-0xb32fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xb3300000-0xb5ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xb6000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff908a45c00000 s107992 r8192 d31272 u524288
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2026218
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7974188K/8233616K available (9059K kernel code, 1666K rwdata, 3836K rodata, 2228K init, 2364K bss, 259428K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:1024 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2700.000 MHz processor
[    0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=10848000)
[    0.000022] pid_max: default: 32768 minimum: 301
[    0.000030] ACPI: Core revision 20160930
[    0.024672] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
[    0.024677] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
[    0.024722] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160930/tbxfload-228)
[    0.032301] ACPI Error: 1 table load failures, 8 successful (20160930/tbxfload-246)
[    0.032325] Security Framework initialized
[    0.032326] Yama: becoming mindful.
[    0.032336] AppArmor: AppArmor initialized
[    0.032687] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033913] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.034453] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034459] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034633] CPU: Physical Processor ID: 0
[    0.034633] CPU: Processor Core ID: 0
[    0.034638] mce: CPU supports 10 MCE banks
[    0.034646] CPU0: Thermal monitoring enabled (TM1)
[    0.034662] process: using mwait in idle threads
[    0.034664] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.034664] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.035035] Freeing SMP alternatives memory: 32K
[    0.035912] ftrace: allocating 34205 entries in 134 pages
[    0.049676] smpboot: Max logical packages: 1
[    0.050876] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.054028] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.093716] TSC deadline timer enabled
[    0.093721] smpboot: CPU0: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.093754] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.093779] ... version:                4
[    0.093779] ... bit width:              48
[    0.093779] ... generic registers:      8
[    0.093780] ... value mask:             0000ffffffffffff
[    0.093780] ... max period:             00007fffffffffff
[    0.093781] ... fixed-purpose events:   3
[    0.093781] ... event mask:             00000007000000ff
[    0.094457] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.094466] smp: Bringing up secondary CPUs ...
[    0.094512] x86: Booting SMP configuration:
[    0.094513] .... node  #0, CPUs:      #1 #2 #3
[    0.095973] smp: Brought up 1 node, 4 CPUs
[    0.095974] smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
[    0.099044] devtmpfs: initialized
[    0.099086] x86/mm: Memory block size: 128MB
[    0.100837] evm: security.selinux
[    0.100837] evm: security.SMACK64
[    0.100837] evm: security.SMACK64EXEC
[    0.100838] evm: security.SMACK64TRANSMUTE
[    0.100838] evm: security.SMACK64MMAP
[    0.100838] evm: security.ima
[    0.100839] evm: security.capability
[    0.100878] PM: Registering ACPI NVS region [mem 0xaabf4000-0xaabf4fff] (4096 bytes)
[    0.100878] PM: Registering ACPI NVS region [mem 0xb2066000-0xb279efff] (7573504 bytes)
[    0.100989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.100996] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.101024] pinctrl core: initialized pinctrl subsystem
[    0.101170] RTC time: 18:58:18, date: 06/07/17
[    0.102112] NET: Registered protocol family 16
[    0.110844] cpuidle: using governor ladder
[    0.122849] cpuidle: using governor menu
[    0.122852] PCCT header not found.
[    0.122919] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.122919] ACPI: bus type PCI registered
[    0.122920] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.122967] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.122968] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.122974] PCI: Using configuration type 1 for base access
[    0.134982] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.134982] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.135164] ACPI: Added _OSI(Module Device)
[    0.135164] ACPI: Added _OSI(Processor Device)
[    0.135165] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.135166] ACPI: Added _OSI(Processor Aggregator Device)
[    0.136287] ACPI: Executed 25 blocks of module-level executable AML code
[    0.144798] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.147944] ACPI: Dynamic OEM Table Load:
[    0.147949] ACPI: SSDT 0xFFFF908A3C3EA000 0005FD (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.148136] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.149489] ACPI: Dynamic OEM Table Load:
[    0.149492] ACPI: SSDT 0xFFFF908A3BDEC000 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.150163] ACPI: Dynamic OEM Table Load:
[    0.150167] ACPI: SSDT 0xFFFF908A3C3EB800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.150599] ACPI: Dynamic OEM Table Load:
[    0.150602] ACPI: SSDT 0xFFFF908A3BDE8C00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.153325] ACPI: Interpreter enabled
[    0.153360] ACPI: (supports S0 S3 S4 S5)
[    0.153361] ACPI: Using IOAPIC for interrupt routing
[    0.153394] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.155396] ACPI: Power Resource [PG00] (on)
[    0.155743] ACPI: Power Resource [PG01] (on)
[    0.156063] ACPI: Power Resource [PG02] (on)
[    0.158524] ACPI: Power Resource [WRST] (on)
[    0.158858] ACPI: Power Resource [WRST] (on)
[    0.159197] ACPI: Power Resource [WRST] (on)
[    0.159531] ACPI: Power Resource [WRST] (on)
[    0.159866] ACPI: Power Resource [WRST] (on)
[    0.160196] ACPI: Power Resource [WRST] (on)
[    0.160526] ACPI: Power Resource [WRST] (on)
[    0.160857] ACPI: Power Resource [WRST] (on)
[    0.161185] ACPI: Power Resource [WRST] (on)
[    0.161518] ACPI: Power Resource [WRST] (on)
[    0.161848] ACPI: Power Resource [WRST] (on)
[    0.162177] ACPI: Power Resource [WRST] (on)
[    0.162506] ACPI: Power Resource [WRST] (on)
[    0.162844] ACPI: Power Resource [WRST] (on)
[    0.163176] ACPI: Power Resource [WRST] (on)
[    0.163508] ACPI: Power Resource [WRST] (on)
[    0.163841] ACPI: Power Resource [WRST] (on)
[    0.164170] ACPI: Power Resource [WRST] (on)
[    0.164498] ACPI: Power Resource [WRST] (on)
[    0.164828] ACPI: Power Resource [WRST] (on)
[    0.171375] ACPI: Power Resource [FN00] (off)
[    0.171447] ACPI: Power Resource [FN01] (off)
[    0.171516] ACPI: Power Resource [FN02] (off)
[    0.171587] ACPI: Power Resource [FN03] (off)
[    0.171656] ACPI: Power Resource [FN04] (off)
[    0.172705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.172710] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.172738] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.173306] PCI host bridge to bus 0000:00
[    0.173307] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.173308] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.173309] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.173310] pci_bus 0000:00: root bus resource [mem 0xb8000000-0xf7ffffff window]
[    0.173311] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.173312] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.173317] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[    0.173604] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.173637] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.173745] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.173794] pci 0000:00:02.0: [8086:1912] type 00 class 0x038000
[    0.173801] pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf4ffffff 64bit]
[    0.173807] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.173810] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.173978] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.173994] pci 0000:00:14.0: reg 0x10: [mem 0xf7210000-0xf721ffff 64bit]
[    0.174053] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.174195] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.174246] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.174265] pci 0000:00:16.0: reg 0x10: [mem 0xf722d000-0xf722dfff 64bit]
[    0.174315] pci 0000:00:16.0: PME# supported from D3hot
[    0.174443] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.174455] pci 0000:00:17.0: reg 0x10: [mem 0xf7228000-0xf7229fff]
[    0.174461] pci 0000:00:17.0: reg 0x14: [mem 0xf722c000-0xf722c0ff]
[    0.174467] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.174473] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.174478] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.174485] pci 0000:00:17.0: reg 0x24: [mem 0xf722b000-0xf722b7ff]
[    0.174520] pci 0000:00:17.0: PME# supported from D3hot
[    0.174641] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    0.174692] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.174798] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.174849] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.174904] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.175004] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.175055] pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
[    0.175254] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.175264] pci 0000:00:1f.2: reg 0x10: [mem 0xf7224000-0xf7227fff]
[    0.175419] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.175439] pci 0000:00:1f.3: reg 0x10: [mem 0xf7220000-0xf7223fff 64bit]
[    0.175468] pci 0000:00:1f.3: reg 0x20: [mem 0xf7200000-0xf720ffff 64bit]
[    0.175514] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.175662] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.175694] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.175740] pci 0000:00:1f.4: reg 0x10: [mem 0xf722a000-0xf722a0ff 64bit]
[    0.175809] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.176019] pci 0000:01:00.0: [10de:00c3] type 00 class 0x030000
[    0.176028] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.176035] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.176043] pci 0000:01:00.0: reg 0x1c: [mem 0xf5000000-0xf5ffffff 64bit]
[    0.176052] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf701ffff pref]
[    0.176096] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.187588] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.187619] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf70fffff]
[    0.187621] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.187676] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.187692] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.187715] pci 0000:02:00.0: reg 0x18: [mem 0xf7104000-0xf7104fff 64bit]
[    0.187730] pci 0000:02:00.0: reg 0x20: [mem 0xf7100000-0xf7103fff 64bit]
[    0.187812] pci 0000:02:00.0: supports D1 D2
[    0.187813] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.187860] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.187886] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.187888] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.187890] pci 0000:00:1c.0:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.187943] acpiphp: Slot [1] registered
[    0.187948] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.189952] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.189993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.190031] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.190069] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.190107] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.190145] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.190183] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.190221] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.190593] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.190793] SCSI subsystem initialized
[    0.190814] libata version 3.00 loaded.
[    0.190843] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.190844] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.190845] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.190846] vgaarb: loaded
[    0.190859] ACPI: bus type USB registered
[    0.190869] usbcore: registered new interface driver usbfs
[    0.190875] usbcore: registered new interface driver hub
[    0.190883] usbcore: registered new device driver usb
[    0.190958] PCI: Using ACPI for IRQ routing
[    0.197627] PCI: pci_cache_line_size set to 64 bytes
[    0.197665] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.197666] e820: reserve RAM buffer [mem 0xa8f9c000-0xabffffff]
[    0.197666] e820: reserve RAM buffer [mem 0xaabf4000-0xabffffff]
[    0.197667] e820: reserve RAM buffer [mem 0xb0766000-0xb3ffffff]
[    0.197668] e820: reserve RAM buffer [mem 0xb2066000-0xb3ffffff]
[    0.197669] e820: reserve RAM buffer [mem 0xb3300000-0xb3ffffff]
[    0.197669] e820: reserve RAM buffer [mem 0x246000000-0x247ffffff]
[    0.197739] NetLabel: Initializing
[    0.197739] NetLabel:  domain hash size = 128
[    0.197739] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.197750] NetLabel:  unlabeled traffic allowed by default
[    0.197845] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.197848] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.199889] clocksource: Switched to clocksource hpet
[    0.205289] VFS: Disk quotas dquot_6.6.0
[    0.205301] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.205369] AppArmor: AppArmor Filesystem Enabled
[    0.205394] pnp: PnP ACPI init
[    0.205582] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.205584] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.205943] pnp 00:01: [dma 0 disabled]
[    0.206049] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.206312] pnp 00:02: [dma 0 disabled]
[    0.206343] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.206528] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.206529] system 00:03: [io  0xffff] has been reserved
[    0.206530] system 00:03: [io  0xffff] has been reserved
[    0.206531] system 00:03: [io  0xffff] has been reserved
[    0.206532] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.206533] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.206534] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206610] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.206612] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206627] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.206653] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.206655] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.206862] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.206863] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.206863] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.206864] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.206865] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.206866] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.206867] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.206868] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.206869] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.206870] system 00:07: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[    0.206871] system 00:07: [mem 0xb3400000-0xb7fffffe] could not be reserved
[    0.206872] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206902] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.206903] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.206904] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.206905] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.206906] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.206907] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.206908] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.206909] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207165] system 00:09: [io  0xfe00-0xfefe] has been reserved
[    0.207167] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.208151] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.208152] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.208153] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.208155] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.208879] pnp: PnP ACPI: found 11 devices
[    0.215470] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.215488] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.215490] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.215491] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.215494] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.215495] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.215496] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215496] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.215497] pci 0000:00:1d.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.215498] pci 0000:00:1d.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.215501] pci 0000:00:1d.0: BAR 14: assigned [mem 0xb8000000-0xb81fffff]
[    0.215504] pci 0000:00:1d.0: BAR 15: assigned [mem 0xb8200000-0xb83fffff 64bit pref]
[    0.215506] pci 0000:00:1d.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.215507] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.215509] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf70fffff]
[    0.215511] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.215514] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.215515] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.215518] pci 0000:00:1c.0:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.215522] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.215525] pci 0000:00:1d.0:   bridge window [io  0x2000-0x2fff]
[    0.215528] pci 0000:00:1d.0:   bridge window [mem 0xb8000000-0xb81fffff]
[    0.215530] pci 0000:00:1d.0:   bridge window [mem 0xb8200000-0xb83fffff 64bit pref]
[    0.215534] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.215535] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.215536] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.215537] pci_bus 0000:00: resource 7 [mem 0xb8000000-0xf7ffffff window]
[    0.215537] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.215538] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf70fffff]
[    0.215539] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.215540] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.215541] pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.215541] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.215542] pci_bus 0000:03: resource 1 [mem 0xb8000000-0xb81fffff]
[    0.215543] pci_bus 0000:03: resource 2 [mem 0xb8200000-0xb83fffff 64bit pref]
[    0.215654] NET: Registered protocol family 2
[    0.215760] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.215848] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.215946] TCP: Hash tables configured (established 65536 bind 65536)
[    0.215961] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.215979] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.216013] NET: Registered protocol family 1
[    0.222614] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.222617] PCI: CLS 0 bytes, default 64
[    0.222646] Unpacking initramfs...
[    0.748358] Freeing initrd memory: 40812K
[    0.748361] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.748363] software IO TLB [mem 0xac766000-0xb0766000] (64MB) mapped at [ffff9088ac766000-ffff9088b0765fff]
[    0.748516] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[    0.748586] Scanning for low memory corruption every 60 seconds
[    0.748826] audit: initializing netlink subsys (disabled)
[    0.748873] audit: type=2000 audit(1496861898.744:1): initialized
[    0.749198] Initialise system trusted keyrings
[    0.749282] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.750328] zbud: loaded
[    0.750658] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.750810] fuse init (API version 7.26)
[    0.751970] Key type asymmetric registered
[    0.751971] Asymmetric key parser 'x509' registered
[    0.751993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.752021] io scheduler noop registered
[    0.752022] io scheduler deadline registered
[    0.752027] io scheduler cfq registered (default)
[    0.752469] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.752470] vesafb: scrolling: redraw
[    0.752471] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.752478] vesafb: framebuffer at 0xe0000000, mapped to 0xffffba7681800000, using 5120k, total 5120k
[    0.752542] Console: switching to colour frame buffer device 160x64
[    0.752556] fb0: VESA VGA frame buffer device
[    0.752563] intel_idle: MWAIT substates: 0x142120
[    0.752564] intel_idle: v0.4.1 model 0x5E
[    0.752708] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.752779] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.752781] ACPI: Sleep Button [SLPB]
[    0.752806] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.752807] ACPI: Power Button [PWRB]
[    0.752831] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.752832] ACPI: Power Button [PWRF]
[    0.812385] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.872116] thermal LNXTHERM:00: registered as thermal_zone0
[    0.872117] ACPI: Thermal Zone [TZ00] (28 C)
[    0.872231] thermal LNXTHERM:01: registered as thermal_zone1
[    0.872231] ACPI: Thermal Zone [TZ01] (30 C)
[    0.872256] GHES: HEST is not enabled!
[    0.872489] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.893272] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.895974] Linux agpgart interface v0.103
[    0.897812] loop: module loaded
[    0.897919] libphy: Fixed MDIO Bus: probed
[    0.897920] tun: Universal TUN/TAP device driver, 1.6
[    0.897920] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.897948] PPP generic driver version 2.4.2
[    0.898008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.898009] ehci-pci: EHCI PCI platform driver
[    0.898015] ehci-platform: EHCI generic platform driver
[    0.898021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.898022] ohci-pci: OHCI PCI platform driver
[    0.898027] ohci-platform: OHCI generic platform driver
[    0.898031] uhci_hcd: USB Universal Host Controller Interface driver
[    0.898136] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.898140] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.899219] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.899223] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.899285] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.899286] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.899286] usb usb1: Product: xHCI Host Controller
[    0.899287] usb usb1: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
[    0.899288] usb usb1: SerialNumber: 0000:00:14.0
[    0.899366] hub 1-0:1.0: USB hub found
[    0.899377] hub 1-0:1.0: 12 ports detected
[    0.907350] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.907352] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.907373] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.907374] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.907375] usb usb2: Product: xHCI Host Controller
[    0.907375] usb usb2: Manufacturer: Linux 4.10.0-22-generic xhci-hcd
[    0.907376] usb usb2: SerialNumber: 0000:00:14.0
[    0.907489] hub 2-0:1.0: USB hub found
[    0.907496] hub 2-0:1.0: 6 ports detected
[    0.911651] i8042: PNP: No PS/2 controller found.
[    0.911652] i8042: Probing ports directly.
[    0.914961] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.914963] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.915130] mousedev: PS/2 mouse device common for all mice
[    0.915427] rtc_cmos 00:05: RTC can wake from S4
[    0.915807] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.915886] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.915907] i2c /dev entries driver
[    0.915940] device-mapper: uevent: version 1.0.3
[    0.916022] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    0.916024] intel_pstate: Intel P-state driver initializing
[    0.916420] intel_pstate: HWP enabled
[    0.916594] ledtrig-cpu: registered to indicate activity on CPUs
[    0.917137] NET: Registered protocol family 10
[    0.921195] Segment Routing with IPv6
[    0.921230] NET: Registered protocol family 17
[    0.921235] Key type dns_resolver registered
[    0.921851] microcode: sig=0x506e3, pf=0x2, revision=0x84
[    0.922155] microcode: Microcode Update Driver: v2.2.
[    0.922504] registered taskstats version 1
[    0.922509] Loading compiled-in X.509 certificates
[    0.924727] Loaded X.509 cert 'Build time autogenerated kernel key: 16d0b76163d206d1e7e0d2ed7117943902d278c6'
[    0.924738] zswap: loaded using pool lzo/zbud
[    0.933712] Key type big_key registered
[    0.933714] Key type trusted registered
[    0.935532] Key type encrypted registered
[    0.935534] AppArmor: AppArmor sha1 policy hashing enabled
[    0.935535] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.935573] evm: HMAC attrs: 0x1
[    0.936176]   Magic number: 5:876:998
[    0.936195] system 00:00: hash matches
[    0.936400] rtc_cmos 00:05: setting system clock to 2017-06-07 18:58:19 UTC (1496861899)
[    0.936730] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.936730] EDD information not available.
[    0.936818] PM: Hibernation image not present or could not be loaded.
[    0.938205] Freeing unused kernel memory: 2228K
[    0.938206] Write protecting the kernel read-only data: 14336k
[    0.938680] Freeing unused kernel memory: 1164K
[    0.939144] Freeing unused kernel memory: 260K
[    0.944184] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.952129] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.952173] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.952179] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.952472] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.952489] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.953093] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.953122] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.953388] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.953414] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.953442] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.969149] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    0.972690] hidraw: raw HID events driver (C) Jiri Kosina
[    0.978594] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.978772] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    0.978968] wmi: Mapper loaded
[    0.998649] [drm] Initialized
[    0.999708] ahci 0000:00:17.0: version 3.0
[    1.002231] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.002234] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.009954] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.009980] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    1.012940] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffba7680ca9000, 70:8b:cd:a4:a3:63, XID 14100800 IRQ 123
[    1.012941] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.020431] MXM: GUID detected in BIOS
[    1.020607] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[    1.020608] fb: switching to nouveaufb from VESA VGA
[    1.020625] Console: switching to colour dummy device 80x25
[    1.020775] nouveau 0000:01:00.0: NVIDIA NV41 (441300a2)
[    1.032050] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.053422] nouveau 0000:01:00.0: bios: version 05.41.02.47.00
[    1.064319] nouveau 0000:01:00.0: fb: 256 MiB DDR1
[    1.068745] scsi host0: ahci
[    1.069015] scsi host1: ahci
[    1.069289] scsi host2: ahci
[    1.069576] scsi host3: ahci
[    1.069652] scsi host4: ahci
[    1.069749] scsi host5: ahci
[    1.069779] ata1: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b100 irq 122
[    1.069783] ata2: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b180 irq 122
[    1.069787] ata3: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b200 irq 122
[    1.069792] ata4: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b280 irq 122
[    1.069796] ata5: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b300 irq 122
[    1.069797] ata6: SATA max UDMA/133 abar m2048@0xf722b000 port 0xf722b380 irq 122
[    1.070036] [drm] Memory usable by graphics device = 4096M
[    1.070037] [drm] Replacing VGA console driver
[    1.070072] [drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0xb4000000 - 0xb8000000]
[    1.076035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.076036] [drm] Driver supports precise vblank timestamp query.
[    1.090405] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[    1.092444] [drm] GuC firmware load skipped
[    1.135452] [TTM] Zone  kernel: Available graphics memory: 4009342 kiB
[    1.135453] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.135453] [TTM] Initializing pool allocator
[    1.135455] [TTM] Initializing DMA pool allocator
[    1.135467] nouveau 0000:01:00.0: DRM: VRAM: 252 MiB
[    1.135468] nouveau 0000:01:00.0: DRM: GART: 512 MiB
[    1.135470] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[    1.135470] nouveau 0000:01:00.0: DRM: DCB version 3.0
[    1.135471] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[    1.135472] nouveau 0000:01:00.0: DRM: DCB outp 01: 04011312 00000000
[    1.135473] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[    1.135474] nouveau 0000:01:00.0: DRM: DCB outp 03: 020223f1 0040c080
[    1.135474] nouveau 0000:01:00.0: DRM: DCB conn 00: 0000
[    1.135475] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130
[    1.135476] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210
[    1.135476] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
[    1.135477] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
[    1.136969] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.136969] [drm] Driver supports precise vblank timestamp query.
[    1.138060] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.145423] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[    1.145426] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[    1.244005] usb 1-5: new low-speed USB device number 2 using xhci_hcd
[    1.256008] nouveau 0000:01:00.0: DRM: Load detected on output B
[    1.256117] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x9000, bo ffff908a33e09c00
[    1.276254] fbcon: nouveaufb (fb0) is primary device
[    1.276312] Console: switching to colour frame buffer device 90x36
[    1.276319] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    1.292019] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    1.292818] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 1
[    1.312083] [drm] Cannot find any crtc or sizes - going 1024x768
[    1.312845] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[    1.372038] nouveau 0000:01:00.0: DRM: Load detected on output B
[    1.384848] ata3: SATA link down (SStatus 4 SControl 300)
[    1.384867] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.384887] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.385639] ata1.00: ATA-10: WDC WD10EZEX-08WN4A0, 01.01A01, max UDMA/100
[    1.385665] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.385678] ata2.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133
[    1.385679] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.386452] ata1.00: configured for UDMA/100
[    1.386592] ata2.00: configured for UDMA/133
[    1.387004] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    1.388496] ata4: SATA link down (SStatus 4 SControl 300)
[    1.388577] ata5: SATA link down (SStatus 4 SControl 300)
[    1.392222] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.392386] usb 1-5: New USB device found, idVendor=045e, idProduct=0039
[    1.392387] usb 1-5: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    1.392387] usb 1-5: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[    1.392388] usb 1-5: Manufacturer: Microsoft
[    1.393916] ata6.00: ATAPI: ASUS    BC-12D2HT, 1.00, max UDMA/100
[    1.394572] ata6.00: configured for UDMA/100
[    1.396472] usbcore: registered new interface driver usbhid
[    1.396472] usbhid: USB HID core driver
[    1.397843] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:045E:0039.0001/input/input7
[    1.398223] hid-generic 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-5/input0
[    1.412216] nouveau 0000:01:00.0: DRM: Setting dpms mode 0 on TV encoder (output 3)
[    1.412221] nouveau 0000:01:00.0: DRM: Output TV-1 is running on CRTC 1 using output B
[    1.456266] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.456267] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.456271] sd 0:0:0:0: [sda] Write Protect is off
[    1.456271] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.456301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.456349] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.456942] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[    1.496136] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.496410] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.496411] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.496422] sd 1:0:0:0: [sdb] Write Protect is off
[    1.496423] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.496440] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.500149] scsi 5:0:0:0: CD-ROM            ASUS     BC-12D2HT        1.00 PQ: 0 ANSI: 5
[    1.512013] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.513208]  sdb: sdb1
[    1.513710] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.520064] nouveau 0000:01:00.0: DRM: Load detected on output B
[    1.525341]  sda: sda1 sda2 < sda5 >
[    1.526904] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.527994] sr 5:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.527994] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.528278] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.528381] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.653438] usb 1-6: New USB device found, idVendor=05e3, idProduct=0606
[    1.653439] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.653440] usb 1-6: Product: USB2.0 Hub
[    1.654233] hub 1-6:1.0: USB hub found
[    1.654552] hub 1-6:1.0: 4 ports detected
[    1.760423] clocksource: Switched to clocksource tsc
[    1.763503] random: fast init done
[    1.780001] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[    1.920522] usb 1-8: New USB device found, idVendor=1a40, idProduct=0201
[    1.920523] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.920524] usb 1-8: Product: USB 2.0 Hub [MTT]
[    1.920934] hub 1-8:1.0: USB hub found
[    1.921010] hub 1-8:1.0: 7 ports detected
[    2.030090] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.212030] usb 1-8.1: new low-speed USB device number 5 using xhci_hcd
[    2.319665] usb 1-8.1: New USB device found, idVendor=046d, idProduct=c316
[    2.319666] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.319692] usb 1-8.1: Product: Logitech USB Keyboard
[    2.319693] usb 1-8.1: Manufacturer: Logitech
[    2.323638] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C316.0002/input/input8
[    2.380236] hid-generic 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:14.0-8.1/input0
[    2.386520] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C316.0003/input/input9
[    2.444241] hid-generic 0003:046D:C316.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:14.0-8.1/input1
[    2.523982] usb 1-8.5: new high-speed USB device number 6 using xhci_hcd
[    2.624286] usb 1-8.5: New USB device found, idVendor=1a40, idProduct=0201
[    2.624287] usb 1-8.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.624287] usb 1-8.5: Product: USB 2.0 Hub [MTT]
[    2.624658] hub 1-8.5:1.0: USB hub found
[    2.624698] hub 1-8.5:1.0: 7 ports detected
[    2.848252] [drm] RC6 on
[    3.066178] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.066260] systemd[1]: Detected architecture x86-64.
[    3.074866] systemd[1]: Set hostname to <ano>.
[    3.340984] random: crng init done
[    4.315848] systemd[1]: Listening on udev Kernel Socket.
[    4.315883] systemd[1]: Reached target Remote File Systems (Pre).
[    4.315893] systemd[1]: Reached target Remote File Systems.
[    4.315898] systemd[1]: Reached target User and Group Name Lookups.
[    4.315917] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.316027] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.316034] systemd[1]: Reached target Encrypted Volumes.
[    5.410552] lp: driver loaded but no devices found
[    5.436651] ppdev: user-space parallel port driver
[    5.479197] parport_pc 00:01: reported by Plug and Play ACPI
[    5.479267] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    5.575984] lp0: using parport0 (interrupt-driven).
[    6.250579] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.450073] systemd-journald[273]: Received request to flush runtime journal from PID 1
[    7.306828] Bluetooth: Core ver 2.22
[    7.306835] NET: Registered protocol family 31
[    7.306836] Bluetooth: HCI device and connection manager initialized
[    7.306837] Bluetooth: HCI socket layer initialized
[    7.306839] Bluetooth: L2CAP socket layer initialized
[    7.306841] Bluetooth: SCO socket layer initialized
[    7.372813] Bluetooth: HCI UART driver ver 2.3
[    7.372814] Bluetooth: HCI UART protocol H4 registered
[    7.372814] Bluetooth: HCI UART protocol BCSP registered
[    7.372815] Bluetooth: HCI UART protocol LL registered
[    7.372815] Bluetooth: HCI UART protocol ATH3K registered
[    7.372816] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    7.372832] Bluetooth: HCI UART protocol Intel registered
[    7.372838] Bluetooth: HCI UART protocol Broadcom registered
[    7.372839] Bluetooth: HCI UART protocol QCA registered
[    7.372839] Bluetooth: HCI UART protocol AG6XX registered
[    7.372840] Bluetooth: HCI UART protocol Marvell registered
[    7.789800] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    7.789800] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    7.789801] RAPL PMU: hw unit of domain package 2^-14 Joules
[    7.789801] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    7.789801] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    7.789802] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    7.958109] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.961860] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    8.323937] nouveau 0000:01:00.0: DRM: Load detected on output B
[    8.739441] AVX2 version of gcm_enc/dec engaged.
[    8.739441] AES CTR mode by8 optimization enabled
[    9.128753] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    9.344947] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.344949] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.344949] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.344950] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.344951] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    9.344951] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.344952] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    9.344953] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    9.344953] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    9.383046] kvm: disabled by bios
[    9.416520] kvm: disabled by bios
[    9.697445] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    9.697903] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    9.698131] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    9.698160] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    9.698189] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    9.698217] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    9.698245] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    9.698272] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    9.857746] intel_rapl: Found RAPL domain package
[    9.857747] intel_rapl: Found RAPL domain core
[    9.857748] intel_rapl: Found RAPL domain uncore
[    9.857748] intel_rapl: Found RAPL domain dram
[    9.894707] asus_wmi: ASUS WMI generic driver loaded
[    9.975851] asus_wmi: Initialization: 0x0
[    9.975868] asus_wmi: BIOS WMI version: 0.9
[    9.975961] asus_wmi: SFUN value: 0x0
[    9.976179] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input18
[    9.976337] asus_wmi: Number of fans: 1
[   10.810734] audit: type=1400 audit(1496861909.368:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=680 comm="apparmor_parser"
[   10.810735] audit: type=1400 audit(1496861909.368:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=680 comm="apparmor_parser"
[   10.810736] audit: type=1400 audit(1496861909.368:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=680 comm="apparmor_parser"
[   10.810736] audit: type=1400 audit(1496861909.368:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=680 comm="apparmor_parser"
[   10.859233] audit: type=1400 audit(1496861909.416:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=683 comm="apparmor_parser"
[   10.860657] audit: type=1400 audit(1496861909.420:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=679 comm="apparmor_parser"
[   10.860673] audit: type=1400 audit(1496861909.420:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=679 comm="apparmor_parser"
[   10.950469] audit: type=1400 audit(1496861909.508:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=684 comm="apparmor_parser"
[   10.950470] audit: type=1400 audit(1496861909.508:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=684 comm="apparmor_parser"
[   10.978260] audit: type=1400 audit(1496861909.536:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=686 comm="apparmor_parser"
[   11.713206] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   11.863242] Adding 8232956k swap on /dev/sda5.  Priority:-1 extents:1 across:8232956k FS
[   11.923985] nouveau 0000:01:00.0: DRM: Load detected on output B
[   19.736575] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   19.846206] kauditd_printk_skb: 14 callbacks suppressed
[   19.846207] audit: type=1400 audit(1496861918.408:26): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/989/status" pid=989 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=121 ouid=121
[   19.846208] audit: type=1400 audit(1496861918.408:27): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/sys/devices/system/node/" pid=989 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=121 ouid=0
[   19.846281] audit: type=1400 audit(1496861918.408:28): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/989/status" pid=989 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=121 ouid=121
[   19.926764] r8169 0000:02:00.0 enp2s0: link down
[   19.926765] r8169 0000:02:00.0 enp2s0: link down
[   19.926842] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   21.556289] r8169 0000:02:00.0 enp2s0: link up
[   21.556295] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   23.276014] nouveau 0000:01:00.0: DRM: Load detected on output B
[   23.383988] nouveau 0000:01:00.0: DRM: Load detected on output B
[   49.135856] nouveau 0000:01:00.0: DRM: Load detected on output B
[   51.230844] nouveau 0000:01:00.0: DRM: Load detected on output B
[   52.504161] nouveau 0000:01:00.0: DRM: Load detected on output B
[   52.612920] nouveau 0000:01:00.0: DRM: Load detected on output B
[   60.702153] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   60.702154] Bluetooth: BNEP filters: protocol multicast
[   60.702157] Bluetooth: BNEP socket layer initialized
[   62.236610] nouveau 0000:01:00.0: DRM: Load detected on output B
[   62.344838] nouveau 0000:01:00.0: DRM: Load detected on output B
[  139.623888] nouveau 0000:01:00.0: DRM: Load detected on output B
[  139.731880] nouveau 0000:01:00.0: DRM: Load detected on output B
[  139.943824] nouveau 0000:01:00.0: DRM: Load detected on output B
[  139.983804] nouveau 0000:01:00.0: DRM: Load detected on output B
[  140.023781] nouveau 0000:01:00.0: DRM: Load detected on output B
[  140.063789] nouveau 0000:01:00.0: DRM: Load detected on output B
[  140.103771] nouveau 0000:01:00.0: DRM: Load detected on output B
[  140.143766] nouveau 0000:01:00.0: DRM: Load detected on output B
[  140.183761] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.227667] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.335831] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.527616] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.567566] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.607582] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.647598] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.687573] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.727542] nouveau 0000:01:00.0: DRM: Load detected on output B
[  141.771550] nouveau 0000:01:00.0: DRM: Load detected on output B

et voila de bisnext

Jun  7, 2017, bisnext report id 6d853

                                 bisnext 0.03


============================ Hardware and System Summary ======================

inxi program not available on this system. Install inxi package.


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.


__________________________________ OS prober ________________________________

None


_____________________________ md5sum of EFI files _____________________________

None


========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    (,msdos1)/boot/grub
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk search_fs_uuid
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    /boot/grub
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,937,055,743 1,937,053,696  83 Linux
/dev/sda2       1,937,057,790 1,953,523,711    16,465,922   5 Extended
/dev/sda5       1,937,057,792 1,953,523,711    16,465,920  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048 1,953,523,711 1,953,521,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        d110c13f-1323-4921-bfc6-b4554137d3a0   ext4       
/dev/sda5        e482e773-c2c6-4361-b945-121067188f53   swap       
/dev/sdb1        4270806b-d664-417b-9732-e9ca96433ea9   ext4       home_ano_q

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 jun  7 20:58 ata-ASUS_BC-12D2HT_K9DF5M92707 -> ../../sr0
lrwxrwxrwx 1 root root  9 jun  7 20:58 ata-WDC_WD10EZEX-00WN4A0_WD-WCC6Y0UTTZJN -> ../../sdb
lrwxrwxrwx 1 root root 10 jun  7 20:58 ata-WDC_WD10EZEX-00WN4A0_WD-WCC6Y0UTTZJN-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 jun  7 20:58 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ -> ../../sda
lrwxrwxrwx 1 root root 10 jun  7 20:58 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 jun  7 20:58 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 jun  7 20:58 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 jun  7 20:58 wwn-0x50014ee20dcca2da -> ../../sda
lrwxrwxrwx 1 root root 10 jun  7 20:58 wwn-0x50014ee20dcca2da-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 jun  7 20:58 wwn-0x50014ee20dcca2da-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 jun  7 20:58 wwn-0x50014ee20dcca2da-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 jun  7 20:58 wwn-0x50014ee2629cb26a -> ../../sdb
lrwxrwxrwx 1 root root 10 jun  7 20:58 wwn-0x50014ee2629cb26a-part1 -> ../../sdb1


_________________________ "ls -R /dev/mapper/" output _________________________

None


________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda1        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1        /mnt/4270806b-d664-417b-9732-e9ca96433ea9            ext4 (rw,nosuid,nodev,relatime,data=ordered)



__________________________=== Boot Files Content ===___________________________


___________________________ sda1/boot/grub/grub.cfg: ___________________________

File size: 16108, Line count: 405, Menu entries (sub entries included) : 14

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d110c13f-1323-4921-bfc6-b4554137d3a0' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d110c13f-1323-4921-bfc6-b4554137d3a0
	else
	  search --no-floppy --fs-uuid --set=root d110c13f-1323-4921-bfc6-b4554137d3a0
	fi
        linux	/boot/vmlinuz-4.10.0-22-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-22-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda1/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=e482e773-c2c6-4361-b945-121067188f53 none            swap    sw              0       0
/dev/disk/by-id/wwn-0x50025388a02504d2 /mnt/wwn-0x50025388a02504d2 auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-uuid/4270806b-d664-417b-9732-e9ca96433ea9 /mnt/4270806b-d664-417b-9732-e9ca96433ea9 auto nosuid,nodev,nofail,x-gvfs-show 0 0

____________________________ sda1/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro quiet splash vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 2.726s (kernel) + 1min 53.833s (userspace) = 1min 56.560s


blame, first 10:
apt-daily.service                   1min     43.645s
mysql.service                       44.781s
NetworkManager-wait-online.service  9.588s
dev-sda1.device                     7.534s
apache2.service                     7.089s
ModemManager.service                6.116s
grub-common.service                 5.849s
apport.service                      5.530s
irqbalance.service                  5.209s
ondemand.service                    4.845s


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @59.472s
  2 multi-user.target @59.472s
  3 mysql.service @14.689s +44.781s
  4 network.target @14.689s
  5 NetworkManager.service @10.188s +4.499s
  6 dbus.service @9.176s
  7 basic.target @9.175s
  8 sockets.target @9.175s
  9 snapd.socket @9.159s +16ms
 10 sysinit.target @9.135s
 11 swap.target @9.135s
 12 dev-disk-by\x2duuid-e482e773\x2dc2c6\x2d4361\x2db945\x2d121067188f53.swap @9.082s +51ms
 13 dev-disk-by\x2duuid-e482e773\x2dc2c6\x2d4361\x2db945\x2d121067188f53.device @9.082s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           7.6G        1.2G        4.6G         61M        1.8G        6.0G
Swap:          7.9G          0B        7.9G
Swappiness = 60

Filesystem     Mounted on                                Type  Size  Used Avail Use% IUse%
/dev/sda1      /                                         ext4  910G  588G  276G  69%    2%
/dev/sdb1      /mnt/4270806b-d664-417b-9732-e9ca96433ea9 ext4  917G  540G  335G  62%    1%

Swap partition for hibernation : UUID=e482e773-c2c6-4361-b945-121067188f53


_________________________________ USB devices __________________________________

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 005: ID 046d:c316 Logitech, Inc. HID-Compliant Keyboard
Bus 001 Device 004: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 003: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 5: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 6: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
    |__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/7p, 480M
        |__ Port 5: Dev 6, If 0, Class=Hub, Driver=hub/7p, 480M
        |__ Port 1: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 1: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M


_______________________________ Wireless Status _______________________________

None


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
acpi_als               16384  0
acpi_pad              180224  0
aesni_intel           167936  0
aes_x86_64             20480  1 aesni_intel
ahci                   36864  3
asus_wmi               28672  1 eeepc_wmi
autofs4                40960  2
binfmt_misc            20480  1
bluetooth             561152  11 hci_uart,btintel,btqca,bnep,btbcm
bnep                   20480  2
btbcm                  16384  1 hci_uart
btintel                16384  1 hci_uart
btqca                  16384  1 hci_uart
btrfs                1089536  0
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd            16384  1 aesni_intel
drm                   352256  10 nouveau,i915,ttm,drm_kms_helper
drm_kms_helper        151552  2 nouveau,i915
eeepc_wmi              16384  0
fb_sys_fops            16384  1 drm_kms_helper
fjes                   77824  0
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hci_uart               98304  0
hfs                    57344  0
hfsplus               106496  0
hid                   118784  3 i2c_hid,hid_generic,usbhid
hid_generic            16384  0
i2c_algo_bit           16384  2 nouveau,i915
i2c_hid                20480  0
i915                 1449984  2
industrialio           69632  2 acpi_als,kfifo_buf
input_leds             16384  0
intel_cstate           20480  0
intel_lpss             16384  1 intel_lpss_acpi
intel_lpss_acpi        16384  0
intel_powerclamp       16384  0
intel_rapl             20480  0
intel_rapl_perf        16384  0
irqbypass              16384  1 kvm
jfs                   184320  0
kfifo_buf              16384  1 acpi_als
kvm                   593920  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
mac_hid                16384  0
mei                   102400  1 mei_me
mei_me                 40960  0
mii                    16384  1 r8169
minix                  36864  0
msdos                  20480  0
mxm_wmi                16384  1 nouveau
nouveau              1601536  5
ntfs                  102400  0
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  1
pcbc                   16384  0
pinctrl_intel          20480  1 pinctrl_sunrisepoint
pinctrl_sunrisepoint    28672  0
ppdev                  20480  0
psmouse               139264  0
qnx4                   16384  0
r8169                  81920  0
raid6_pq              114688  1 btrfs
serio_raw              16384  0
shpchp                 36864  0
snd                    77824  17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec         126976  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     49152  1
snd_hda_codec_realtek    90112  1
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel          36864  3
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               102400  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                65536  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
sparse_keymap          16384  1 asus_wmi
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
ttm                    98304  1 nouveau
ufs                    73728  0
usbhid                 53248  0
video                  40960  3 asus_wmi,nouveau,i915
wmi                    16384  3 asus_wmi,mxm_wmi,nouveau
x86_pkg_temp_thermal    16384  0
xfs                  1191936  0
xor                    24576  1 btrfs


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free

== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
vendor   : NVIDIA Corporation
model    : NV41 [GeForce 6800 XT]
modalias : pci:v000010DEd000000C3sv00003842sd0000C381bc03sc00i00
driver   : xserver-xorg-video-nouveau - distro free builtin
driver   : nvidia-304 - distro non-free recommended


__________________________________ Locales ___________________________________

locale command output:
LANG=fr_BE.UTF-8
LANGUAGE=fr_BE:fr
LC_CTYPE="fr_BE.UTF-8"
LC_NUMERIC="fr_BE.UTF-8"
LC_TIME="fr_BE.UTF-8"
LC_COLLATE="fr_BE.UTF-8"
LC_MONETARY="fr_BE.UTF-8"
LC_MESSAGES="fr_BE.UTF-8"
LC_PAPER="fr_BE.UTF-8"
LC_NAME="fr_BE.UTF-8"
LC_ADDRESS="fr_BE.UTF-8"
LC_TELEPHONE="fr_BE.UTF-8"
LC_MEASUREMENT="fr_BE.UTF-8"
LC_IDENTIFICATION="fr_BE.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_BE.UTF-8"
LANGUAGE="fr_BE:fr"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr,us
variant:    oss,

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

gir1.2-unity-5.0                    7.1.4+16.04.2016070 from:7.1.4+15.10.2015100
libunity-scopes-json-def-desktop    7.1.4+16.04.2016070 from:7.1.4+15.10.2015100
unity-scopes-runner                 7.1.4+16.04.2016070 from:7.1.4+15.10.2015100


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  linux-headers-4.4.0-77 linux-headers-4.4.0-77-generic linux-headers-4.4.0-78
  linux-headers-4.4.0-78-generic linux-image-4.4.0-77-generic
  linux-image-4.4.0-78-generic linux-image-extra-4.4.0-77-generic
  linux-image-extra-4.4.0-78-generic
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
linux-image-4.4.0-21-generic        4.4.0-21.37
linux-image-4.4.0-62-generic        4.4.0-62.83
linux-image-extra-4.4.0-21-generic  4.4.0-21.37
linux-image-extra-4.4.0-62-generic  4.4.0-62.83
ubuntu-core-launcher                2.22.2


Use the following command to clean old configuration files:

sudo apt purge linux-image-4.4.0-21-generic linux-image-4.4.0-62-generic linux-image-extra-4.4.0-21-generic linux-image-extra-4.4.0-62-generic ubuntu-core-launcher


_________________________ Kernel Packages Installed __________________________

Package                               Version
linux-generic                         4.4.0.79.85
linux-generic-hwe-16.04-edge          4.10.0.22.15
linux-headers-4.10.0-22               4.10.0-22.24~16.04.1
linux-headers-4.10.0-22-generic       4.10.0-22.24~16.04.1
linux-headers-4.4.0-77                4.4.0-77.98
linux-headers-4.4.0-77-generic        4.4.0-77.98
linux-headers-4.4.0-78                4.4.0-78.99
linux-headers-4.4.0-78-generic        4.4.0-78.99
linux-headers-4.4.0-79                4.4.0-79.100
linux-headers-4.4.0-79-generic        4.4.0-79.100
linux-headers-generic                 4.4.0.79.85
linux-headers-generic-hwe-16.04-edge  4.10.0.22.15
linux-image-4.10.0-22-generic         4.10.0-22.24~16.04.1
linux-image-4.4.0-77-generic          4.4.0-77.98
linux-image-4.4.0-78-generic          4.4.0-78.99
linux-image-4.4.0-79-generic          4.4.0-79.100
linux-image-extra-4.10.0-22-generic   4.10.0-22.24~16.04.1
linux-image-extra-4.4.0-77-generic    4.4.0-77.98
linux-image-extra-4.4.0-78-generic    4.4.0-78.99
linux-image-extra-4.4.0-79-generic    4.4.0-79.100
linux-image-generic                   4.4.0.79.85
linux-image-generic-hwe-16.04-edge    4.10.0.22.15


Files in /boot directory:
abi-4.10.0-22-generic
abi-4.4.0-77-generic
abi-4.4.0-78-generic
abi-4.4.0-79-generic
config-4.10.0-22-generic
config-4.4.0-77-generic
config-4.4.0-78-generic
config-4.4.0-79-generic
grub
grub.bak
initrd.img-4.10.0-22-generic
initrd.img-4.4.0-77-generic
initrd.img-4.4.0-78-generic
initrd.img-4.4.0-79-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-22-generic
System.map-4.4.0-77-generic
System.map-4.4.0-78-generic
System.map-4.4.0-79-generic
vmlinuz-4.10.0-22-generic
vmlinuz-4.4.0-77-generic
vmlinuz-4.4.0-78-generic
vmlinuz-4.4.0-79-generic


________________________ Kernel Candidates for Removal ________________________

At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !

kernel versions kept:
4.4.0-79-generic
4.10.0-22-generic (running kernel)
4.4.0-78-generic

kernel candidates for removal:
4.4.0-77-generic

Command to run in a terminal to purge the packages from the system:

sudo apt purge  linux-headers-4.4.0-77 linux-headers-4.4.0-77-generic linux-image-4.4.0-77-generic linux-image-extra-4.4.0-77-generic  


_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.000000] ACPI: UEFI 0x00000000A8FC9618 000042 (v01                 00000000      00000000)
[    0.024672] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
[    0.024677] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
[    0.024722] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160930/tbxfload-228)
[    0.032301] ACPI Error: 1 table load failures, 8 successful (20160930/tbxfload-246)
[    0.144798] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.153394] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.172738] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.190793] SCSI subsystem initialized
[    0.751993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.068745] scsi host0: ahci
[    1.069015] scsi host1: ahci
[    1.069289] scsi host2: ahci
[    1.069576] scsi host3: ahci
[    1.069652] scsi host4: ahci
[    1.069749] scsi host5: ahci
[    1.070072] [drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0xb4000000 - 0xb8000000]
[    1.092444] [drm] GuC firmware load skipped
[    1.384848] ata3: SATA link down (SStatus 4 SControl 300)
[    1.384867] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.384887] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.387004] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    1.388496] ata4: SATA link down (SStatus 4 SControl 300)
[    1.388577] ata5: SATA link down (SStatus 4 SControl 300)
[    1.392222] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.456266] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.456349] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.456942] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[    1.496136] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.496410] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.500149] scsi 5:0:0:0: CD-ROM            ASUS     BC-12D2HT        1.00 PQ: 0 ANSI: 5
[    1.513710] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.526904] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.527994] sr 5:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.528278] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.528381] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    6.250579] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)	id=10	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ Logitech Logitech USB Keyboard          	id=11	[slave  keyboard (3)]
    ↳ Logitech Logitech USB Keyboard          	id=12	[slave  keyboard (3)]
    ↳ Eee PC WMI hotkeys                      	id=13	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 320 x 200, current 2640 x 1080, maximum 4096 x 4096
VGA-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
   1920x1080     60.00*+
   1600x1200     60.00  
   1680x1050     59.95  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.89  
   1280x960      60.00  
   1280x800      59.81  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    72.81    66.67    59.94  
   720x400       70.08  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-1 connected 720x576+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm
   720x576       50.00*+
   1024x768      50.00  
   800x600       50.00  
   720x480       50.00  
   640x480       50.00  
   400x300       50.00  
   320x240       50.00  
   320x200       50.00  
DP1 disconnected
HDMI1 disconnected
HDMI2 disconnected
VIRTUAL1 disconnected


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.773] (==) No Layout section.  Using the first Screen section.
[    21.773] (==) No screen section available. Using defaults.
[    21.773] (**) |-->Screen "Default Screen Section" (0)
[    21.773] (**) |   |-->Monitor "<default monitor>"
[    21.797] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    21.800] (--) PCI: (0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xf4000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    21.800] (--) PCI:*(0:1:0:0) 10de:00c3:3842:c381 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf5000000/16777216, BIOS @ 0x????????/131072
[    21.800] (II) LoadModule: "glx"
[    21.962] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    22.351] (II) LoadModule: "nvidia"
[    22.351] (WW) Warning, couldn't open module nvidia
[    22.351] (II) UnloadModule: "nvidia"
[    22.351] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    22.351] (II) LoadModule: "nouveau"
[    22.351] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    22.624] (II) LoadModule: "intel"
[    22.624] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    22.983] (II) LoadModule: "modesetting"
[    22.983] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.023] (II) LoadModule: "fbdev"
[    23.023] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.043] (II) LoadModule: "vesa"
[    23.043] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.138] (II) LoadModule: "nvidia"
[    23.138] (WW) Warning, couldn't open module nvidia
[    23.138] (II) UnloadModule: "nvidia"
[    23.138] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    23.138] (II) LoadModule: "nouveau"
[    23.139] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    23.139] (II) UnloadModule: "nouveau"
[    23.139] (II) LoadModule: "intel"
[    23.139] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.139] (II) UnloadModule: "intel"
[    23.139] (II) LoadModule: "modesetting"
[    23.139] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.139] (II) UnloadModule: "modesetting"
[    23.139] (II) LoadModule: "fbdev"
[    23.139] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.139] (II) UnloadModule: "fbdev"
[    23.139] (II) LoadModule: "vesa"
[    23.139] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.139] (II) UnloadModule: "vesa"
[    23.140] (WW) Falling back to old probe method for modesetting
[    23.140] (WW) Falling back to old probe method for fbdev
[    23.140] (II) Loading sub module "fbdevhw"
[    23.140] (II) LoadModule: "fbdevhw"
[    23.140] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.161] (WW) Falling back to old probe method for vesa
[    23.161] (II) Loading sub module "dri2"
[    23.161] (II) LoadModule: "dri2"
[    23.161] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    23.190] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    23.232] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    23.272] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    23.272] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    23.272] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    23.272] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    23.301] (II) NOUVEAU(0): Monitor name: SyncMaster
[    23.380] (II) Loading sub module "fb"
[    23.380] (II) LoadModule: "fb"
[    23.380] (II) Loading /usr/lib/xorg/modules/libfb.so
[    23.420] (II) Loading sub module "shadowfb"
[    23.420] (II) LoadModule: "shadowfb"
[    23.421] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    23.422] (II) intel(G0): Output HDMI1 has no monitor section
[    23.422] (II) intel(G0): Output HDMI2 has no monitor section
[    23.422] (II) intel(G0): Output DP1 has no monitor section
[    23.422] (II) intel(G0): Output VIRTUAL1 has no monitor section
[    23.422] (II) Loading sub module "dri2"
[    23.422] (II) LoadModule: "dri2"
[    23.422] (II) Loading sub module "present"
[    23.422] (II) LoadModule: "present"
[    23.422] (II) UnloadModule: "modesetting"
[    23.422] (II) UnloadModule: "fbdev"
[    23.422] (II) UnloadModule: "vesa"
[    23.749] (II) Loading sub module "exa"
[    23.749] (II) LoadModule: "exa"
[    23.749] (II) Loading /usr/lib/xorg/modules/libexa.so
[    23.806] (II) EXA(0): Driver allocated offscreen pixmaps
[    23.806] (II)         UploadToScreen
[    23.806] (II)         DownloadFromScreen
[    27.513] (II) GLX: Initialized DRI2 GL provider for screen 0
[    27.516] (II) NOUVEAU(0): Setting screen physical size to 698 x 285
[    28.686] (II) LoadModule: "evdev"
[    28.686] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-22-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-22-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? yes
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:1912
BusID "PCI:0@0:2:0"
Is boot vga? no
Vendor/Device Id: 10de:c3
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card0", driven by "nouveau"
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card0", driven by "nouveau"
Skipping "/dev/dri/card1", driven by "i915"
Found "/dev/dri/card0", driven by "nouveau"
output 0:
	card0-TV-1
output 1:
	card0-VGA-1
Number of connected outputs for /dev/dri/card0: 2
Found "/dev/dri/card1", driven by "i915"
Number of connected outputs for /dev/dri/card1: 0
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
The number of cards has changed!
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed


============================ Disks SMART Attributes ===========================

### ATA disks: sda sdb

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20dcca2da
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jun  7 21:07:56 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   183   172   021    -    1825
  4 Start_Stop_Count        -O--CK   100   100   000    -    157
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    219
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    157
192 Power-Off_Retract_Count -O--CK   200   200   000    -    62
193 Load_Cycle_Count        -O--CK   200   200   000    -    198
194 Temperature_Celsius     -O---K   111   101   000    -    32
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-00WN4A0
LU WWN Device Id: 5 0014ee 2629cb26a
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jun  7 21:07:56 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   182   170   021    -    1900
  4 Start_Stop_Count        -O--CK   100   100   000    -    280
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    540
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    280
192 Power-Off_Retract_Count -O--CK   200   200   000    -    96
193 Load_Cycle_Count        -O--CK   200   200   000    -    648
194 Temperature_Celsius     -O---K   111   103   000    -    32
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

Chouette ton habitude de mettre les liens d'office
Merci
EM


Ubuntu 20.04.4 LTS

Hors ligne

#11 Le 08/06/2017, à 13:24

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Install inxi avant de générer le rapport bisnext, il me manque les infos sur l'état de xorg.

sudo apt install inxi

Puis génère le rapport.

Depuis le boot repair tu as essayé de démarrer en ajoutant modprobe.blacklist=nouveau aux paramètres de démarrage du noyau ?  Il suffit d'éditer la première ligne du menu grub pour l'ajouter manuellement, et branche l'écran sur le port de la carte mère.

Hors ligne

#12 Le 08/06/2017, à 21:24

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

hello,

Voilà déjà le rapport avec INXI installé, je fais le test tout de suite

Jun  8 2017, bisnext report id 1248e also available at https://paste.debian.net/970686/

                                 bisnext 0.03


============================ Hardware and System Summary ======================

System:    Kernel: 4.10.0-22-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine:   Device: desktop Mobo: ASUSTeK model: B150M-A/M.2 v: Rev X.0x
           UEFI [Legacy]: American Megatrends v: 0403 date: 05/06/2016
Battery    No battery data found in /sys or dmidecode. Is one present?
CPU:       Quad core Intel Core i5-6400 (-MCP-) cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21696
           clock speeds: min/max: 800/3300 MHz 1: 899 MHz 2: 899 MHz
           3: 899 MHz 4: 899 MHz
Memory:    Array-1 capacity: 64 GB devices: 4 EC: None
           Device-1: DIMM_A1 size: 4 GB speed: 2133 MHz type: DDR4
           manufacturer: Kingston part: KHX2133C14D4/4G
           Device-2: DIMM_A2 size: No Module Installed type: N/A
           Device-3: DIMM_B1 size: 4 GB speed: 2133 MHz type: DDR4
           manufacturer: Kingston part: KHX2133C14D4/4G
           Device-4: DIMM_B2 size: No Module Installed type: N/A
Graphics:  Card-1: Intel Sky Lake Integrated Graphics
           bus-ID: 00:02.0 chip-ID: 8086:1912
           Card-2: NVIDIA NV41 [GeForce 6800 XT]
           bus-ID: 01:00.0 chip-ID: 10de:00c3
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: modesetting,fbdev,vesa) FAILED: intel
           tty size: 1920x1080@60.00hz, 720x576@50.00hz
           GLX Renderer: Gallium 0.4 on NV41
           GLX Version: 2.1 Mesa 12.0.6 Direct Rendering: Yes
Audio:     Card Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
           Sound: Advanced Linux Sound Architecture v: k4.10.0-22-generic
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000
           bus-ID: 02:00.0 chip-ID: 10ec:8168
           IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2000.4GB (60.9% used)
           ID-1: /dev/sda model: WDC_WD10EZEX size: 1000.2GB
           temp: 26C
           ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB
           temp: 27C
           Optical: /dev/sr0 model: ASUS BC-12D2HT
           rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 1x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 910G used: 588G (69%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: d110c13f-1323-4921-bfc6-b4554137d3a0
           ID-2: /mnt/4270806b-d664-417b-9732-e9ca96433ea9 size: 917G used: 540G (62%) fs: ext4 dev: /dev/sdb1
           label: home_ano_q uuid: 4270806b-d664-417b-9732-e9ca96433ea9
           ID-3: swap-1 size: 8.43GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
           label: N/A uuid: e482e773-c2c6-4361-b945-121067188f53
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C
           Fan Speeds (in rpm): cpu: 0
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://be.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://be.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://be.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
           deb http://be.archive.ubuntu.com/ubuntu/ xenial-updates restricted universe main multiverse
           deb http://be.archive.ubuntu.com/ubuntu/ xenial-backports multiverse restricted universe main
           Active apt sources in file: /etc/apt/sources.list.d/ancestris-ubuntu-ancestris-8-0-xenial.list
           deb http://ppa.launchpad.net/ancestris/ancestris-8-0/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/danielrichter2007-ubuntu-grub-customizer-xenial.list
           deb http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/eid.list
           deb http://files.eid.belgium.be/debian xenial main
           deb http://files2.eid.belgium.be/debian xenial main
           Active apt sources in file: /etc/apt/sources.list.d/jtaylor-ubuntu-keepass-xenial.list
           deb http://ppa.launchpad.net/jtaylor/keepass/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/mscore-ubuntu-ubuntu-mscore-stable-xenial.list
           deb http://ppa.launchpad.net/mscore-ubuntu/mscore-stable/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/tails-team-ubuntu-tails-installer-xenial.list
           deb http://ppa.launchpad.net/tails-team/tails-installer/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/videolan-ubuntu-stable-daily-xenial.list
           deb http://ppa.launchpad.net/videolan/stable-daily/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-ubuntu-boot-repair-xenial.list
           deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 9.7% command: firefox pid: 1975 mem: 357.85MB (4.5%)
           2: cpu: 2.4% command: Xorg pid: 1047 mem: 64.63MB (0.8%)
           3: cpu: 1.3% command: gnome-software pid: 1773 mem: 120.68MB (1.5%)
           4: cpu: 1.3% command: compiz pid: 1547 mem: 104.85MB (1.3%)
           5: cpu: 1.0% command: aptd (started by: python3) pid: 2209 mem: 101.52MB (1.2%)
           6: cpu: 0.6% command: bash pid: 4123 mem: 4.33MB (0.0%)
           7: cpu: 0.4% command: init pid: 1 mem: 5.84MB (0.0%)
           8: cpu: 0.3% command: AgentAntidote.bin pid: 1781 mem: 194.71MB (2.4%)
           9: cpu: 0.2% command: gnome-terminal-server pid: 2207 mem: 36.77MB (0.4%)
           10: cpu: 0.2% command: fwupd pid: 1909 mem: 32.31MB (0.4%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 357.85MB (4.5%) command: firefox pid: 1975 cpu: 9.7%
           2: mem: 194.71MB (2.4%) command: AgentAntidote.bin pid: 1781 cpu: 0.3%
           3: mem: 159.76MB (2.0%) command: mysqld pid: 1002 cpu: 0.1%
           4: mem: 120.68MB (1.5%) command: gnome-software pid: 1773 cpu: 1.3%
           5: mem: 104.85MB (1.3%) command: compiz pid: 1547 cpu: 1.3%
           6: mem: 101.52MB (1.2%) command: aptd (started by: python3) pid: 2209 cpu: 1.0%
           7: mem: 66.54MB (0.8%) command: libflashplayer.so (started by: plugin-container) pid: 2034 cpu: 0.0%
           8: mem: 64.63MB (0.8%) command: Xorg pid: 1047 cpu: 2.4%
           9: mem: 58.55MB (0.7%) command: evolution-calendar-factory pid: 1762 cpu: 0.0%
           10: mem: 51.41MB (0.6%) command: evolution-calendar-factory-subprocess pid: 1817 cpu: 0.0%
Info:      Processes: 228 Uptime: 3 min Memory: 1429.3/7830.8MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.12


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.


__________________________________ OS prober ________________________________

None


_____________________________ md5sum of EFI files _____________________________

None


========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    (,msdos1)/boot/grub
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk search_fs_uuid
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    /boot/grub
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,937,055,743 1,937,053,696  83 Linux
/dev/sda2       1,937,057,790 1,953,523,711    16,465,922   5 Extended
/dev/sda5       1,937,057,792 1,953,523,711    16,465,920  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048 1,953,523,711 1,953,521,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        d110c13f-1323-4921-bfc6-b4554137d3a0   ext4       
/dev/sda5        e482e773-c2c6-4361-b945-121067188f53   swap       
/dev/sdb1        4270806b-d664-417b-9732-e9ca96433ea9   ext4       home_ano_q

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 jun  8 21:17 ata-ASUS_BC-12D2HT_K9DF5M92707 -> ../../sr0
lrwxrwxrwx 1 root root  9 jun  8 21:17 ata-WDC_WD10EZEX-00WN4A0_WD-WCC6Y0UTTZJN -> ../../sdb
lrwxrwxrwx 1 root root 10 jun  8 21:17 ata-WDC_WD10EZEX-00WN4A0_WD-WCC6Y0UTTZJN-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 jun  8 21:17 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ -> ../../sda
lrwxrwxrwx 1 root root 10 jun  8 21:17 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 jun  8 21:17 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 jun  8 21:17 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 jun  8 21:17 wwn-0x50014ee20dcca2da -> ../../sda
lrwxrwxrwx 1 root root 10 jun  8 21:17 wwn-0x50014ee20dcca2da-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 jun  8 21:17 wwn-0x50014ee20dcca2da-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 jun  8 21:17 wwn-0x50014ee20dcca2da-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 jun  8 21:17 wwn-0x50014ee2629cb26a -> ../../sdb
lrwxrwxrwx 1 root root 10 jun  8 21:17 wwn-0x50014ee2629cb26a-part1 -> ../../sdb1


_________________________ "ls -R /dev/mapper/" output _________________________

None


________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda1        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1        /mnt/4270806b-d664-417b-9732-e9ca96433ea9            ext4 (rw,nosuid,nodev,relatime,data=ordered)



__________________________=== Boot Files Content ===___________________________


___________________________ sda1/boot/grub/grub.cfg: ___________________________

File size: 16108, Line count: 405, Menu entries (sub entries included) : 14

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d110c13f-1323-4921-bfc6-b4554137d3a0' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d110c13f-1323-4921-bfc6-b4554137d3a0
	else
	  search --no-floppy --fs-uuid --set=root d110c13f-1323-4921-bfc6-b4554137d3a0
	fi
        linux	/boot/vmlinuz-4.10.0-22-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-22-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda1/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=e482e773-c2c6-4361-b945-121067188f53 none            swap    sw              0       0
/dev/disk/by-id/wwn-0x50025388a02504d2 /mnt/wwn-0x50025388a02504d2 auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-uuid/4270806b-d664-417b-9732-e9ca96433ea9 /mnt/4270806b-d664-417b-9732-e9ca96433ea9 auto nosuid,nodev,nofail,x-gvfs-show 0 0

____________________________ sda1/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro quiet splash vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 2.542s (kernel) + 1min 31.406s (userspace) = 1min 33.948s


blame, first 10:
apt-daily.service                   21.839s
mysql.service                       21.319s
dev-sda1.device                     16.147s
systemd-tmpfiles-setup-dev.service  9.856s
NetworkManager-wait-online.service  9.121s
grub-common.service                 5.181s
apache2.service                     4.510s
irqbalance.service                  4.185s
speech-dispatcher.service           3.939s
lightdm.service                     3.855s


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @41.661s
  2 multi-user.target @41.661s
  3 mysql.service @20.341s +21.319s
  4 network.target @20.341s
  5 NetworkManager.service @18.615s +1.725s
  6 dbus.service @17.432s
  7 basic.target @17.427s
  8 sockets.target @17.427s
  9 snapd.socket @17.402s +23ms
 10 sysinit.target @17.401s
 11 swap.target @17.401s
 12 dev-disk-by\x2duuid-e482e773\x2dc2c6\x2d4361\x2db945\x2d121067188f53.swap @17.310s +89ms
 13 dev-disk-by\x2duuid-e482e773\x2dc2c6\x2d4361\x2db945\x2d121067188f53.device @17.310s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           7.6G        1.3G        5.1G         51M        1.2G        6.0G
Swap:          7.9G          0B        7.9G
Swappiness = 60

Filesystem     Mounted on                                Type  Size  Used Avail Use% IUse%
/dev/sda1      /                                         ext4  910G  588G  276G  69%    2%
/dev/sdb1      /mnt/4270806b-d664-417b-9732-e9ca96433ea9 ext4  917G  540G  335G  62%    1%

Swap partition for hibernation : UUID=e482e773-c2c6-4361-b945-121067188f53


_________________________________ USB devices __________________________________

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 005: ID 046d:c316 Logitech, Inc. HID-Compliant Keyboard
Bus 001 Device 004: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 003: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 5: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 6: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
    |__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/7p, 480M
        |__ Port 5: Dev 6, If 0, Class=Hub, Driver=hub/7p, 480M
        |__ Port 1: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 1: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M


_______________________________ Wireless Status _______________________________

None


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
acpi_als               16384  0
acpi_pad              180224  0
aesni_intel           167936  0
aes_x86_64             20480  1 aesni_intel
ahci                   36864  3
asus_wmi               28672  1 eeepc_wmi
autofs4                40960  2
binfmt_misc            20480  1
bluetooth             561152  11 hci_uart,btintel,btqca,bnep,btbcm
bnep                   20480  2
btbcm                  16384  1 hci_uart
btintel                16384  1 hci_uart
btqca                  16384  1 hci_uart
btrfs                1089536  0
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd            16384  1 aesni_intel
drm                   352256  13 nouveau,i915,ttm,drm_kms_helper
drm_kms_helper        151552  2 nouveau,i915
eeepc_wmi              16384  0
fb_sys_fops            16384  1 drm_kms_helper
fjes                   77824  0
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hci_uart               98304  0
hfs                    57344  0
hfsplus               106496  0
hid                   118784  3 i2c_hid,hid_generic,usbhid
hid_generic            16384  0
i2c_algo_bit           16384  2 nouveau,i915
i2c_hid                20480  0
i915                 1449984  2
industrialio           69632  2 acpi_als,kfifo_buf
input_leds             16384  0
intel_cstate           20480  0
intel_lpss             16384  1 intel_lpss_acpi
intel_lpss_acpi        16384  0
intel_powerclamp       16384  0
intel_rapl             20480  0
intel_rapl_perf        16384  0
irqbypass              16384  1 kvm
jfs                   184320  0
kfifo_buf              16384  1 acpi_als
kvm                   593920  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
mac_hid                16384  0
mei                   102400  1 mei_me
mei_me                 40960  0
mii                    16384  1 r8169
minix                  36864  0
msdos                  20480  0
mxm_wmi                16384  1 nouveau
nouveau              1601536  8
ntfs                  102400  0
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  1
pcbc                   16384  0
pinctrl_intel          20480  1 pinctrl_sunrisepoint
pinctrl_sunrisepoint    28672  0
ppdev                  20480  0
psmouse               139264  0
qnx4                   16384  0
r8169                  81920  0
raid6_pq              114688  1 btrfs
serio_raw              16384  0
shpchp                 36864  0
snd                    77824  17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec         126976  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     49152  1
snd_hda_codec_realtek    90112  1
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel          36864  3
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               102400  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                65536  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
sparse_keymap          16384  1 asus_wmi
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
ttm                    98304  1 nouveau
ufs                    73728  0
usbhid                 53248  0
video                  40960  3 asus_wmi,nouveau,i915
wmi                    16384  3 asus_wmi,mxm_wmi,nouveau
x86_pkg_temp_thermal    16384  0
xfs                  1191936  0
xor                    24576  1 btrfs


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free

== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd000000C3sv00003842sd0000C381bc03sc00i00
model    : NV41 [GeForce 6800 XT]
vendor   : NVIDIA Corporation
driver   : nvidia-304 - distro non-free recommended
driver   : xserver-xorg-video-nouveau - distro free builtin


__________________________________ Locales ___________________________________

locale command output:
LANG=fr_BE.UTF-8
LANGUAGE=fr_BE:fr
LC_CTYPE="fr_BE.UTF-8"
LC_NUMERIC="fr_BE.UTF-8"
LC_TIME="fr_BE.UTF-8"
LC_COLLATE="fr_BE.UTF-8"
LC_MONETARY="fr_BE.UTF-8"
LC_MESSAGES="fr_BE.UTF-8"
LC_PAPER="fr_BE.UTF-8"
LC_NAME="fr_BE.UTF-8"
LC_ADDRESS="fr_BE.UTF-8"
LC_TELEPHONE="fr_BE.UTF-8"
LC_MEASUREMENT="fr_BE.UTF-8"
LC_IDENTIFICATION="fr_BE.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_BE.UTF-8"
LANGUAGE="fr_BE:fr"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr,us
variant:    oss,

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

gir1.2-unity-5.0                    7.1.4+16.04.2016070 from:7.1.4+15.10.2015100
libssl1.0.0                         1.0.2g-1ubuntu4.8   from:1.0.2g-1ubuntu4.6  
libunity-scopes-json-def-desktop    7.1.4+16.04.2016070 from:7.1.4+15.10.2015100
openssl                             1.0.2g-1ubuntu4.8   from:1.0.2g-1ubuntu4.6  
unity-scopes-runner                 7.1.4+16.04.2016070 from:7.1.4+15.10.2015100


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  linux-headers-4.4.0-77 linux-headers-4.4.0-77-generic linux-headers-4.4.0-78
  linux-headers-4.4.0-78-generic linux-image-4.4.0-77-generic
  linux-image-4.4.0-78-generic linux-image-extra-4.4.0-77-generic
  linux-image-extra-4.4.0-78-generic
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
linux-image-4.4.0-21-generic        4.4.0-21.37
linux-image-4.4.0-62-generic        4.4.0-62.83
linux-image-extra-4.4.0-21-generic  4.4.0-21.37
linux-image-extra-4.4.0-62-generic  4.4.0-62.83
ubuntu-core-launcher                2.22.2


Use the following command to clean old configuration files:

sudo apt purge linux-image-4.4.0-21-generic linux-image-4.4.0-62-generic linux-image-extra-4.4.0-21-generic linux-image-extra-4.4.0-62-generic ubuntu-core-launcher


_________________________ Kernel Packages Installed __________________________

Package                               Version
linux-generic                         4.4.0.79.85
linux-generic-hwe-16.04-edge          4.10.0.22.15
linux-headers-4.10.0-22               4.10.0-22.24~16.04.1
linux-headers-4.10.0-22-generic       4.10.0-22.24~16.04.1
linux-headers-4.4.0-77                4.4.0-77.98
linux-headers-4.4.0-77-generic        4.4.0-77.98
linux-headers-4.4.0-78                4.4.0-78.99
linux-headers-4.4.0-78-generic        4.4.0-78.99
linux-headers-4.4.0-79                4.4.0-79.100
linux-headers-4.4.0-79-generic        4.4.0-79.100
linux-headers-generic                 4.4.0.79.85
linux-headers-generic-hwe-16.04-edge  4.10.0.22.15
linux-image-4.10.0-22-generic         4.10.0-22.24~16.04.1
linux-image-4.4.0-77-generic          4.4.0-77.98
linux-image-4.4.0-78-generic          4.4.0-78.99
linux-image-4.4.0-79-generic          4.4.0-79.100
linux-image-extra-4.10.0-22-generic   4.10.0-22.24~16.04.1
linux-image-extra-4.4.0-77-generic    4.4.0-77.98
linux-image-extra-4.4.0-78-generic    4.4.0-78.99
linux-image-extra-4.4.0-79-generic    4.4.0-79.100
linux-image-generic                   4.4.0.79.85
linux-image-generic-hwe-16.04-edge    4.10.0.22.15


Files in /boot directory:
abi-4.10.0-22-generic
abi-4.4.0-77-generic
abi-4.4.0-78-generic
abi-4.4.0-79-generic
config-4.10.0-22-generic
config-4.4.0-77-generic
config-4.4.0-78-generic
config-4.4.0-79-generic
grub
grub.bak
initrd.img-4.10.0-22-generic
initrd.img-4.4.0-77-generic
initrd.img-4.4.0-78-generic
initrd.img-4.4.0-79-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-22-generic
System.map-4.4.0-77-generic
System.map-4.4.0-78-generic
System.map-4.4.0-79-generic
vmlinuz-4.10.0-22-generic
vmlinuz-4.4.0-77-generic
vmlinuz-4.4.0-78-generic
vmlinuz-4.4.0-79-generic


________________________ Kernel Candidates for Removal ________________________

At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !

kernel versions kept:
4.4.0-79-generic
4.10.0-22-generic (running kernel)
4.4.0-78-generic

kernel candidates for removal:
4.4.0-77-generic

Command to run in a terminal to purge the packages from the system:

sudo apt purge  linux-headers-4.4.0-77 linux-headers-4.4.0-77-generic linux-image-4.4.0-77-generic linux-image-extra-4.4.0-77-generic  


_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.000000] ACPI: UEFI 0x00000000A8FC9618 000042 (v01                 00000000      00000000)
[    0.024478] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
[    0.024483] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
[    0.024527] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160930/tbxfload-228)
[    0.032017] ACPI Error: 1 table load failures, 8 successful (20160930/tbxfload-246)
[    0.152650] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.161196] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.180456] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.199071] SCSI subsystem initialized
[    0.760360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.081097] scsi host0: ahci
[    1.081416] scsi host1: ahci
[    1.081675] scsi host2: ahci
[    1.082337] scsi host3: ahci
[    1.082666] scsi host4: ahci
[    1.084302] scsi host5: ahci
[    1.084855] [drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0xb4000000 - 0xb8000000]
[    1.104876] [drm] GuC firmware load skipped
[    1.400328] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.402194] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    1.404233] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.404841] ata3: SATA link down (SStatus 4 SControl 300)
[    1.404989] ata4: SATA link down (SStatus 4 SControl 300)
[    1.408222] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.408261] ata5: SATA link down (SStatus 4 SControl 300)
[    1.472699] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.472949] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.473476] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[    1.524549] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.524581] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.528781] scsi 5:0:0:0: CD-ROM            ASUS     BC-12D2HT        1.00 PQ: 0 ANSI: 5
[    1.531398] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.540195] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.556339] sr 5:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.556599] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.556818] sr 5:0:0:0: Attached scsi generic sg2 type 5
[   18.266653] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)	id=10	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ Logitech Logitech USB Keyboard          	id=11	[slave  keyboard (3)]
    ↳ Logitech Logitech USB Keyboard          	id=12	[slave  keyboard (3)]
    ↳ Eee PC WMI hotkeys                      	id=13	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 320 x 200, current 2640 x 1080, maximum 4096 x 4096
VGA-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
   1920x1080     60.00*+
   1600x1200     60.00  
   1680x1050     59.95  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.89  
   1280x960      60.00  
   1280x800      59.81  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    72.81    66.67    59.94  
   720x400       70.08  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-1 connected 720x576+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm
   720x576       50.00*+
   1024x768      50.00  
   800x600       50.00  
   720x480       50.00  
   640x480       50.00  
   400x300       50.00  
   320x240       50.00  
   320x200       50.00  
DP1 disconnected
HDMI1 disconnected
HDMI2 disconnected
VIRTUAL1 disconnected


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.428] (==) No Layout section.  Using the first Screen section.
[    25.428] (==) No screen section available. Using defaults.
[    25.428] (**) |-->Screen "Default Screen Section" (0)
[    25.428] (**) |   |-->Monitor "<default monitor>"
[    25.428] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    25.430] (--) PCI: (0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xf4000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64
[    25.430] (--) PCI:*(0:1:0:0) 10de:00c3:3842:c381 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf5000000/16777216, BIOS @ 0x????????/131072
[    25.430] (II) LoadModule: "glx"
[    25.460] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.536] (II) LoadModule: "nvidia"
[    25.536] (WW) Warning, couldn't open module nvidia
[    25.536] (II) UnloadModule: "nvidia"
[    25.536] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    25.536] (II) LoadModule: "nouveau"
[    25.536] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    25.550] (II) LoadModule: "intel"
[    25.550] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    25.583] (II) LoadModule: "modesetting"
[    25.583] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.583] (II) LoadModule: "fbdev"
[    25.583] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.583] (II) LoadModule: "vesa"
[    25.583] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.583] (II) LoadModule: "nvidia"
[    25.583] (WW) Warning, couldn't open module nvidia
[    25.583] (II) UnloadModule: "nvidia"
[    25.584] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    25.584] (II) LoadModule: "nouveau"
[    25.584] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    25.584] (II) UnloadModule: "nouveau"
[    25.584] (II) LoadModule: "intel"
[    25.584] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    25.584] (II) UnloadModule: "intel"
[    25.584] (II) LoadModule: "modesetting"
[    25.584] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.584] (II) UnloadModule: "modesetting"
[    25.584] (II) LoadModule: "fbdev"
[    25.584] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.584] (II) UnloadModule: "fbdev"
[    25.584] (II) LoadModule: "vesa"
[    25.584] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.584] (II) UnloadModule: "vesa"
[    25.584] (WW) Falling back to old probe method for modesetting
[    25.584] (WW) Falling back to old probe method for fbdev
[    25.584] (II) Loading sub module "fbdevhw"
[    25.584] (II) LoadModule: "fbdevhw"
[    25.585] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    25.585] (WW) Falling back to old probe method for vesa
[    25.585] (II) Loading sub module "dri2"
[    25.585] (II) LoadModule: "dri2"
[    25.585] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    25.614] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    25.656] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    25.696] (II) NOUVEAU(0): Output TV-1 has no monitor section
[    25.696] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    25.696] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    25.696] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    25.726] (II) NOUVEAU(0): Monitor name: SyncMaster
[    25.816] (II) Loading sub module "fb"
[    25.816] (II) LoadModule: "fb"
[    25.816] (II) Loading /usr/lib/xorg/modules/libfb.so
[    25.816] (II) Loading sub module "shadowfb"
[    25.816] (II) LoadModule: "shadowfb"
[    25.816] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    25.817] (II) intel(G0): Output HDMI1 has no monitor section
[    25.817] (II) intel(G0): Output HDMI2 has no monitor section
[    25.817] (II) intel(G0): Output DP1 has no monitor section
[    25.817] (II) intel(G0): Output VIRTUAL1 has no monitor section
[    25.818] (II) Loading sub module "dri2"
[    25.818] (II) LoadModule: "dri2"
[    25.818] (II) Loading sub module "present"
[    25.818] (II) LoadModule: "present"
[    25.818] (II) UnloadModule: "modesetting"
[    25.818] (II) UnloadModule: "fbdev"
[    25.818] (II) UnloadModule: "vesa"
[    25.826] (II) Loading sub module "exa"
[    25.826] (II) LoadModule: "exa"
[    25.826] (II) Loading /usr/lib/xorg/modules/libexa.so
[    25.826] (II) EXA(0): Driver allocated offscreen pixmaps
[    25.826] (II)         UploadToScreen
[    25.826] (II)         DownloadFromScreen
[    27.808] (II) GLX: Initialized DRI2 GL provider for screen 0
[    27.811] (II) NOUVEAU(0): Setting screen physical size to 698 x 285
[    28.407] (II) LoadModule: "evdev"
[    28.407] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-22-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-22-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? yes
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:1912
BusID "PCI:0@0:2:0"
Is boot vga? no
Vendor/Device Id: 10de:c3
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card0", driven by "nouveau"
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card0", driven by "nouveau"
Skipping "/dev/dri/card1", driven by "i915"
Found "/dev/dri/card0", driven by "nouveau"
output 0:
	card0-TV-1
output 1:
	card0-VGA-1
Number of connected outputs for /dev/dri/card0: 2
Found "/dev/dri/card1", driven by "i915"
Number of connected outputs for /dev/dri/card1: 0
Does it require offloading? no
last cards number = 2
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no


============================ Disks SMART Attributes ===========================

### ATA disks: sda sdb

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20dcca2da
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jun  8 21:21:36 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   183   172   021    -    1825
  4 Start_Stop_Count        -O--CK   100   100   000    -    158
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    219
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    158
192 Power-Off_Retract_Count -O--CK   200   200   000    -    62
193 Load_Cycle_Count        -O--CK   200   200   000    -    199
194 Temperature_Celsius     -O---K   116   101   000    -    27
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-00WN4A0
LU WWN Device Id: 5 0014ee 2629cb26a
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jun  8 21:21:36 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   181   170   021    -    1916
  4 Start_Stop_Count        -O--CK   100   100   000    -    281
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    540
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    281
192 Power-Off_Retract_Count -O--CK   200   200   000    -    96
193 Load_Cycle_Count        -O--CK   200   200   000    -    650
194 Temperature_Celsius     -O---K   116   103   000    -    27
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

Ubuntu 20.04.4 LTS

Hors ligne

#13 Le 08/06/2017, à 21:48

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Hello,

Je n'arrive pas à faire le test avec la carte graphique de la carte mère, j'ai toujours un écran noir.
Dommage.
Bonne soirée
EM


Ubuntu 20.04.4 LTS

Hors ligne

#14 Le 10/06/2017, à 21:15

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Hello,

J'ai fait plusieurs essais en vain. Je n'arrive pas à utiliser la carte graphique de la carte mère, je n'ai même plus le message du bios depuis les changements.
Merci d'avance de votre aide
EM


Ubuntu 20.04.4 LTS

Hors ligne

#15 Le 10/06/2017, à 22:09

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Retire la carte graphique au pire pour tester.

Hors ligne

#16 Le 10/06/2017, à 22:33

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Hello,

La nvidia ? Ok, je ferais ça demain.
Tu n'as rien vu dans le bisnext ?

Merci de ton aide
EM


Ubuntu 20.04.4 LTS

Hors ligne

#17 Le 11/06/2017, à 09:54

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Un message d'erreur dans le journal, il semble que c'est pas bloquant d'après ce que j'ai trouvé :

[    1.084855] [drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0xb4000000 - 0xb8000000]
[    1.104876] [drm] GuC firmware load skipped

Hors ligne

#18 Le 11/06/2017, à 11:14

moko138

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

emena a écrit :

Je n'arrive pas à faire le test avec la carte graphique de la carte mère, j'ai toujours un écran noir.

bisnext a écrit :
Machine:   Device: desktop

Si je comprends bien tu as une tour, avec plusieurs prises pour écran(s).
Exact ?

Si oui, ton écran est-il bien branché à une prise de la carte-mère ?


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#19 Le 11/06/2017, à 12:10

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

moko138 a écrit :

Si oui, ton écran est-il bien branché à une prise de la carte-mère ?

@moko138 vois le message #8

Hors ligne

#20 Le 11/06/2017, à 13:18

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Hello tout les deux,

Oui, j'ai une tour. Dans le temps j'avais une carte mère sans carte graphique, elle est morte et je l'ai remplacé par l'actuelle qui en a une. ne sachant pas laquelle était meilleure, j'ai mis les deux. C'est pour cela que je peux faire les tests avec les deux.

Bon, mais tout ça c'est peut-être du passé,

- j'ai retiré la carte NVDIA et j'ai branché mon écran sur la carte de la carte mère,
- j'ai pu voir le menu grub
- j'ai booté en ajoutant la ligne modprobe.blacklist=nouveau
- j'ai pu atteindre le bureau.

Je vais faire le test sans cette ligne, mais si elle est nécessaire, où dois-je la rajouter ?

EM


Ubuntu 20.04.4 LTS

Hors ligne

#21 Le 11/06/2017, à 13:22

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

re-hello,

C'est passé, mais c'est bizarre, normalement je devrais pouvoir mettre une carte graphique sur ma carte mère.
Est-ce que se serait un problèmes de la carte nvdia ?

Voulez vous le bisnext ?

Dernière modification par emena (Le 11/06/2017, à 13:22)


Ubuntu 20.04.4 LTS

Hors ligne

#22 Le 11/06/2017, à 13:35

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Le paramètre modprobe.blacklist=nouveau ne sert que lorsque une carte graphique nvidia est présente.

emena a écrit :

Est-ce que se serait un problèmes de la carte nvdia ?

Je pense plutôt à un problème de bios qui par défaut démarre sur la carte graphique dédiée.

Voulez vous le bisnext ?

Oui ce serait intéressant pour comparer.

Dernière modification par Laurent85 (Le 11/06/2017, à 13:35)

Hors ligne

#23 Le 11/06/2017, à 13:59

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Laurent85 a écrit :

Je pense plutôt à un problème de bios qui par défaut démarre sur la carte graphique dédiée.

Se serait logique de sa part.

J'utilise mon PC depuis un peu plus d'une heure, avec des vidéos et radiotray, la bécane ne s'est pas bloquée. C'est un plus par rapport à avant.

Par contre, j'ai quelques bizarreries avec cette carte :

- parfois ma sourie bloque un temps à gauche,
- je n'arrive pas à voir certains programmes comme DIA. Ils sont lancés, je les vois dans htop, mais invisibles sur l'écran.

Je reviens vers 17h
EM

Jun 11 2017, bisnext report id d9284 also available at http://paste.tux.ovh/view/e5a72395

                                 bisnext 0.03


============================ Hardware and System Summary ======================

System:    Kernel: 4.10.0-22-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine:   Device: desktop Mobo: ASUSTeK model: B150M-A/M.2 v: Rev X.0x
           UEFI [Legacy]: American Megatrends v: 0403 date: 05/06/2016
Battery    No battery data found in /sys or dmidecode. Is one present?
CPU:       Quad core Intel Core i5-6400 (-MCP-) cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21696
           clock speeds: min/max: 800/3300 MHz 1: 899 MHz 2: 899 MHz
           3: 899 MHz 4: 899 MHz
Memory:    Array-1 capacity: 64 GB devices: 4 EC: None
           Device-1: DIMM_A1 size: 4 GB speed: 2133 MHz type: DDR4
           manufacturer: Kingston part: KHX2133C14D4/4G
           Device-2: DIMM_A2 size: No Module Installed type: N/A
           Device-3: DIMM_B1 size: 4 GB speed: 2133 MHz type: DDR4
           manufacturer: Kingston part: KHX2133C14D4/4G
           Device-4: DIMM_B2 size: No Module Installed type: N/A
Graphics:  Card: Intel Sky Lake Integrated Graphics
           bus-ID: 00:02.0 chip-ID: 8086:1912
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
           GLX Renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
           GLX Version: 4.3 Mesa 12.0.6 (compat-v: 3.0) Direct Rendering: Yes
Audio:     Card Intel Sunrise Point-H HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
           Sound: Advanced Linux Sound Architecture v: k4.10.0-22-generic
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000
           bus-ID: 01:00.0 chip-ID: 10ec:8168
           IF: enp1s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 2000.4GB (60.9% used)
           ID-1: /dev/sda model: WDC_WD10EZEX size: 1000.2GB
           temp: 35C
           ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB
           temp: 35C
           Optical: /dev/sr0 model: ASUS BC-12D2HT
           rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 1x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 910G used: 588G (69%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: d110c13f-1323-4921-bfc6-b4554137d3a0
           ID-2: /mnt/4270806b-d664-417b-9732-e9ca96433ea9 size: 917G used: 540G (62%) fs: ext4 dev: /dev/sdb1
           label: home_ano_q uuid: 4270806b-d664-417b-9732-e9ca96433ea9
           ID-3: swap-1 size: 8.43GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
           label: N/A uuid: e482e773-c2c6-4361-b945-121067188f53
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C
           Fan Speeds (in rpm): cpu: 0
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://be.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://be.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://be.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
           deb http://be.archive.ubuntu.com/ubuntu/ xenial-updates restricted universe main multiverse
           deb http://be.archive.ubuntu.com/ubuntu/ xenial-backports multiverse restricted universe main
           Active apt sources in file: /etc/apt/sources.list.d/ancestris-ubuntu-ancestris-8-0-xenial.list
           deb http://ppa.launchpad.net/ancestris/ancestris-8-0/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/danielrichter2007-ubuntu-grub-customizer-xenial.list
           deb http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/eid.list
           deb http://files.eid.belgium.be/debian xenial main
           deb http://files2.eid.belgium.be/debian xenial main
           Active apt sources in file: /etc/apt/sources.list.d/jtaylor-ubuntu-keepass-xenial.list
           deb http://ppa.launchpad.net/jtaylor/keepass/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/mscore-ubuntu-ubuntu-mscore-stable-xenial.list
           deb http://ppa.launchpad.net/mscore-ubuntu/mscore-stable/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/tails-team-ubuntu-tails-installer-xenial.list
           deb http://ppa.launchpad.net/tails-team/tails-installer/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/videolan-ubuntu-stable-daily-xenial.list
           deb http://ppa.launchpad.net/videolan/stable-daily/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/yannubuntu-ubuntu-boot-repair-xenial.list
           deb http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 16.8% command: thunderbird pid: 1898 mem: 302.56MB (3.8%)
           2: cpu: 14.9% command: firefox pid: 1909 mem: 517.48MB (6.5%)
           3: cpu: 12.4% command: libflashplayer.so (started by: plugin-container) pid: 2074 mem: 105.25MB (1.3%)
           4: cpu: 5.3% command: compiz pid: 1501 mem: 98.99MB (1.2%)
           5: cpu: 5.0% command: Xorg pid: 997 mem: 149.78MB (1.9%)
           6: cpu: 1.5% command: KeePass.exe (started by: cli) pid: 2453 mem: 92.60MB (1.1%)
           7: cpu: 1.4% command: pulseaudio pid: 1593 mem: 11.62MB (0.1%)
           8: cpu: 1.2% command: gnome-terminal-server pid: 2529 mem: 36.59MB (0.4%)
           9: cpu: 0.2% command: bash pid: 2548 mem: 4.43MB (0.0%)
           10: cpu: 0.2% command: bamfdaemon pid: 1456 mem: 32.26MB (0.4%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 517.48MB (6.5%) command: firefox pid: 1909 cpu: 14.9%
           2: mem: 302.56MB (3.8%) command: thunderbird pid: 1898 cpu: 16.8%
           3: mem: 195.21MB (2.4%) command: AgentAntidote.bin pid: 1692 cpu: 0.1%
           4: mem: 161.14MB (2.0%) command: mysqld pid: 955 cpu: 0.0%
           5: mem: 149.76MB (1.9%) command: Xorg pid: 997 cpu: 5.0%
           6: mem: 105.25MB (1.3%) command: libflashplayer.so (started by: plugin-container) pid: 2074 cpu: 12.4%
           7: mem: 98.99MB (1.2%) command: compiz pid: 1501 cpu: 5.3%
           8: mem: 92.60MB (1.1%) command: KeePass.exe (started by: cli) pid: 2453 cpu: 1.5%
           9: mem: 87.38MB (1.1%) command: gnome-software pid: 1681 cpu: 0.1%
           10: mem: 58.33MB (0.7%) command: evolution-calendar-factory pid: 1734 cpu: 0.0%
Info:      Processes: 221 Uptime: 15 min Memory: 1731.6/7862.7MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.19


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.


__________________________________ OS prober ________________________________

None


_____________________________ md5sum of EFI files _____________________________

None


========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    (,msdos1)/boot/grub
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk search_fs_uuid
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    /boot/grub
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,937,055,743 1,937,053,696  83 Linux
/dev/sda2       1,937,057,790 1,953,523,711    16,465,922   5 Extended
/dev/sda5       1,937,057,792 1,953,523,711    16,465,920  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048 1,953,523,711 1,953,521,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        d110c13f-1323-4921-bfc6-b4554137d3a0   ext4       
/dev/sda5        e482e773-c2c6-4361-b945-121067188f53   swap       
/dev/sdb1        4270806b-d664-417b-9732-e9ca96433ea9   ext4       home_ano_q

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 jun 11 13:24 ata-ASUS_BC-12D2HT_K9DF5M92707 -> ../../sr0
lrwxrwxrwx 1 root root  9 jun 11 13:24 ata-WDC_WD10EZEX-00WN4A0_WD-WCC6Y0UTTZJN -> ../../sdb
lrwxrwxrwx 1 root root 10 jun 11 13:24 ata-WDC_WD10EZEX-00WN4A0_WD-WCC6Y0UTTZJN-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 jun 11 13:24 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ -> ../../sda
lrwxrwxrwx 1 root root 10 jun 11 13:24 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 jun 11 13:24 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 jun 11 13:24 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y1EA30DJ-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 jun 11 13:24 wwn-0x50014ee20dcca2da -> ../../sda
lrwxrwxrwx 1 root root 10 jun 11 13:24 wwn-0x50014ee20dcca2da-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 jun 11 13:24 wwn-0x50014ee20dcca2da-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 jun 11 13:24 wwn-0x50014ee20dcca2da-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 jun 11 13:24 wwn-0x50014ee2629cb26a -> ../../sdb
lrwxrwxrwx 1 root root 10 jun 11 13:24 wwn-0x50014ee2629cb26a-part1 -> ../../sdb1


_________________________ "ls -R /dev/mapper/" output _________________________

None


________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda1        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1        /mnt/4270806b-d664-417b-9732-e9ca96433ea9            ext4 (rw,nosuid,nodev,relatime,data=ordered)



__________________________=== Boot Files Content ===___________________________


___________________________ sda1/boot/grub/grub.cfg: ___________________________

File size: 16251, Line count: 402, Menu entries (sub entries included) : 13

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d110c13f-1323-4921-bfc6-b4554137d3a0' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  d110c13f-1323-4921-bfc6-b4554137d3a0
	else
	  search --no-floppy --fs-uuid --set=root d110c13f-1323-4921-bfc6-b4554137d3a0
	fi
        linux	/boot/vmlinuz-4.10.0-22-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-22-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda1/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=e482e773-c2c6-4361-b945-121067188f53 none            swap    sw              0       0
/dev/disk/by-id/wwn-0x50025388a02504d2 /mnt/wwn-0x50025388a02504d2 auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-uuid/4270806b-d664-417b-9732-e9ca96433ea9 /mnt/4270806b-d664-417b-9732-e9ca96433ea9 auto nosuid,nodev,nofail,x-gvfs-show 0 0

____________________________ sda1/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=d110c13f-1323-4921-bfc6-b4554137d3a0 ro quiet splash vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 2.599s (kernel) + 1min 31.621s (userspace) = 1min 34.221s


blame, first 10:
mysql.service                       19.627s
dev-sda1.device                     11.769s
systemd-sysctl.service              8.080s
NetworkManager-wait-online.service  7.741s
systemd-udevd.service               6.885s
apache2.service                     5.616s
grub-common.service                 4.743s
apport.service                      3.577s
speech-dispatcher.service           3.561s
ondemand.service                    3.555s


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @36.293s
  2 multi-user.target @36.293s
  3 mysql.service @16.664s +19.627s
  4 network.target @16.664s
  5 NetworkManager.service @14.393s +2.270s
  6 dbus.service @13.422s
  7 basic.target @13.410s
  8 sockets.target @13.410s
  9 snapd.socket @13.392s +17ms
 10 sysinit.target @13.360s
 11 swap.target @13.360s
 12 dev-disk-by\x2duuid-e482e773\x2dc2c6\x2d4361\x2db945\x2d121067188f53.swap @13.305s +54ms
 13 dev-disk-by\x2duuid-e482e773\x2dc2c6\x2d4361\x2db945\x2d121067188f53.device @13.304s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           7.7G        1.6G        4.6G        438M        1.5G        5.4G
Swap:          7.9G          0B        7.9G
Swappiness = 60

Filesystem     Mounted on                                Type  Size  Used Avail Use% IUse%
/dev/sda1      /                                         ext4  910G  588G  276G  69%    2%
/dev/sdb1      /mnt/4270806b-d664-417b-9732-e9ca96433ea9 ext4  917G  540G  335G  62%    1%

Swap partition for hibernation : UUID=e482e773-c2c6-4361-b945-121067188f53


_________________________________ USB devices __________________________________

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 005: ID 046d:c316 Logitech, Inc. HID-Compliant Keyboard
Bus 001 Device 004: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 003: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 5: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 6: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
    |__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/7p, 480M
        |__ Port 5: Dev 6, If 0, Class=Hub, Driver=hub/7p, 480M
        |__ Port 1: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 1: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M


_______________________________ Wireless Status _______________________________

None


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
acpi_als               16384  0
acpi_pad              180224  0
aesni_intel           167936  0
aes_x86_64             20480  1 aesni_intel
ahci                   36864  3
asus_wmi               28672  1 eeepc_wmi
autofs4                40960  2
binfmt_misc            20480  1
bluetooth             561152  11 hci_uart,btintel,btqca,bnep,btbcm
bnep                   20480  2
btbcm                  16384  1 hci_uart
btintel                16384  1 hci_uart
btqca                  16384  1 hci_uart
btrfs                1089536  0
coretemp               16384  0
crc32_pclmul           16384  0
crct10dif_pclmul       16384  0
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
crypto_simd            16384  1 aesni_intel
drm                   352256  10 i915,drm_kms_helper
drm_kms_helper        151552  1 i915
eeepc_wmi              16384  0
fb_sys_fops            16384  1 drm_kms_helper
fjes                   77824  0
ghash_clmulni_intel    16384  0
glue_helper            16384  1 aesni_intel
hci_uart               98304  0
hfs                    57344  0
hfsplus               106496  0
hid                   118784  3 i2c_hid,hid_generic,usbhid
hid_generic            16384  0
i2c_algo_bit           16384  1 i915
i2c_hid                20480  0
i915                 1449984  9
industrialio           69632  2 acpi_als,kfifo_buf
input_leds             16384  0
intel_cstate           20480  0
intel_lpss             16384  1 intel_lpss_acpi
intel_lpss_acpi        16384  0
intel_powerclamp       16384  0
intel_rapl             20480  0
intel_rapl_perf        16384  0
irqbypass              16384  1 kvm
jfs                   184320  0
kfifo_buf              16384  1 acpi_als
kvm                   593920  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
mac_hid                16384  0
mei                   102400  1 mei_me
mei_me                 40960  0
mii                    16384  1 r8169
minix                  36864  0
msdos                  20480  0
mxm_wmi                16384  0
ntfs                  102400  0
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  1
pcbc                   16384  0
pinctrl_intel          20480  1 pinctrl_sunrisepoint
pinctrl_sunrisepoint    28672  0
ppdev                  20480  0
psmouse               139264  0
qnx4                   16384  0
r8169                  81920  0
raid6_pq              114688  1 btrfs
serio_raw              16384  0
shpchp                 36864  0
snd                    77824  20 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec         126976  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     49152  1
snd_hda_codec_realtek    90112  1
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel          36864  5
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               102400  5 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                65536  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
sparse_keymap          16384  1 asus_wmi
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
ufs                    73728  0
usbhid                 53248  0
video                  40960  2 asus_wmi,i915
wmi                    16384  2 asus_wmi,mxm_wmi
x86_pkg_temp_thermal    16384  0
xfs                  1191936  0
xor                    24576  1 btrfs


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free


__________________________________ Locales ___________________________________

locale command output:
LANG=fr_BE.UTF-8
LANGUAGE=fr_BE:fr
LC_CTYPE="fr_BE.UTF-8"
LC_NUMERIC="fr_BE.UTF-8"
LC_TIME="fr_BE.UTF-8"
LC_COLLATE="fr_BE.UTF-8"
LC_MONETARY="fr_BE.UTF-8"
LC_MESSAGES="fr_BE.UTF-8"
LC_PAPER="fr_BE.UTF-8"
LC_NAME="fr_BE.UTF-8"
LC_ADDRESS="fr_BE.UTF-8"
LC_TELEPHONE="fr_BE.UTF-8"
LC_MEASUREMENT="fr_BE.UTF-8"
LC_IDENTIFICATION="fr_BE.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_BE.UTF-8"
LANGUAGE="fr_BE:fr"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr,us
variant:    oss,

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="oss"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

gir1.2-unity-5.0                    7.1.4+16.04.2016070 from:7.1.4+15.10.2015100
libunity-scopes-json-def-desktop    7.1.4+16.04.2016070 from:7.1.4+15.10.2015100
unity-scopes-runner                 7.1.4+16.04.2016070 from:7.1.4+15.10.2015100


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  linux-headers-4.4.0-77 linux-headers-4.4.0-77-generic linux-headers-4.4.0-78
  linux-headers-4.4.0-78-generic linux-image-4.4.0-77-generic
  linux-image-4.4.0-78-generic linux-image-extra-4.4.0-77-generic
  linux-image-extra-4.4.0-78-generic
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
linux-image-4.4.0-21-generic        4.4.0-21.37
linux-image-4.4.0-62-generic        4.4.0-62.83
linux-image-extra-4.4.0-21-generic  4.4.0-21.37
linux-image-extra-4.4.0-62-generic  4.4.0-62.83
ubuntu-core-launcher                2.22.2


Use the following command to clean old configuration files:

sudo apt purge linux-image-4.4.0-21-generic linux-image-4.4.0-62-generic linux-image-extra-4.4.0-21-generic linux-image-extra-4.4.0-62-generic ubuntu-core-launcher


_________________________ Kernel Packages Installed __________________________

Package                               Version
linux-generic                         4.4.0.79.85
linux-generic-hwe-16.04-edge          4.10.0.22.15
linux-headers-4.10.0-22               4.10.0-22.24~16.04.1
linux-headers-4.10.0-22-generic       4.10.0-22.24~16.04.1
linux-headers-4.4.0-77                4.4.0-77.98
linux-headers-4.4.0-77-generic        4.4.0-77.98
linux-headers-4.4.0-78                4.4.0-78.99
linux-headers-4.4.0-78-generic        4.4.0-78.99
linux-headers-4.4.0-79                4.4.0-79.100
linux-headers-4.4.0-79-generic        4.4.0-79.100
linux-headers-generic                 4.4.0.79.85
linux-headers-generic-hwe-16.04-edge  4.10.0.22.15
linux-image-4.10.0-22-generic         4.10.0-22.24~16.04.1
linux-image-4.4.0-77-generic          4.4.0-77.98
linux-image-4.4.0-78-generic          4.4.0-78.99
linux-image-4.4.0-79-generic          4.4.0-79.100
linux-image-extra-4.10.0-22-generic   4.10.0-22.24~16.04.1
linux-image-extra-4.4.0-77-generic    4.4.0-77.98
linux-image-extra-4.4.0-78-generic    4.4.0-78.99
linux-image-extra-4.4.0-79-generic    4.4.0-79.100
linux-image-generic                   4.4.0.79.85
linux-image-generic-hwe-16.04-edge    4.10.0.22.15


Files in /boot directory:
abi-4.10.0-22-generic
abi-4.4.0-77-generic
abi-4.4.0-78-generic
abi-4.4.0-79-generic
config-4.10.0-22-generic
config-4.4.0-77-generic
config-4.4.0-78-generic
config-4.4.0-79-generic
grub
grub.bak
initrd.img-4.10.0-22-generic
initrd.img-4.4.0-77-generic
initrd.img-4.4.0-78-generic
initrd.img-4.4.0-79-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-22-generic
System.map-4.4.0-77-generic
System.map-4.4.0-78-generic
System.map-4.4.0-79-generic
vmlinuz-4.10.0-22-generic
vmlinuz-4.4.0-77-generic
vmlinuz-4.4.0-78-generic
vmlinuz-4.4.0-79-generic


________________________ Kernel Candidates for Removal ________________________

At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !

kernel versions kept:
4.4.0-79-generic
4.10.0-22-generic (running kernel)
4.4.0-78-generic

kernel candidates for removal:
4.4.0-77-generic

Command to run in a terminal to purge the packages from the system:

sudo apt purge  linux-headers-4.4.0-77 linux-headers-4.4.0-77-generic linux-image-4.4.0-77-generic linux-image-extra-4.4.0-77-generic  


_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.000000] ACPI: UEFI 0x00000000BAFC9618 000042 (v01                 00000000      00000000)
[    0.024904] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
[    0.024910] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
[    0.024953] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160930/tbxfload-228)
[    0.032487] ACPI Error: 1 table load failures, 8 successful (20160930/tbxfload-246)
[    0.145071] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.153728] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.173166] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.179420] SCSI subsystem initialized
[    0.739334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.057417] scsi host0: ahci
[    1.057850] scsi host1: ahci
[    1.058276] scsi host2: ahci
[    1.058616] scsi host3: ahci
[    1.059090] scsi host4: ahci
[    1.059431] scsi host5: ahci
[    1.060134] [drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0xc6000000 - 0xc8000000]
[    1.088095] [drm] GuC firmware load skipped
[    1.372880] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.372899] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.374978] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    1.377803] ata5: SATA link down (SStatus 4 SControl 300)
[    1.377853] ata4: SATA link down (SStatus 4 SControl 300)
[    1.377876] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.377916] ata3: SATA link down (SStatus 4 SControl 300)
[    1.412910] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.413055] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.413610] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[    1.444940] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.445376] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.447465] scsi 5:0:0:0: CD-ROM            ASUS     BC-12D2HT        1.00 PQ: 0 ANSI: 5
[    1.462814] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.467100] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.480816] sr 5:0:0:0: [sr0] scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.481138] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.481285] sr 5:0:0:0: Attached scsi generic sg2 type 5
[   13.924704] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)	id=10	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ Logitech Logitech USB Keyboard          	id=11	[slave  keyboard (3)]
    ↳ Logitech Logitech USB Keyboard          	id=12	[slave  keyboard (3)]
    ↳ Eee PC WMI hotkeys                      	id=13	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
   1920x1080     60.00*+  59.93  
   1680x1050     69.88    59.95    59.88  
   1600x1024     60.17  
   1400x1050     74.76    70.00    59.98  
   1600x900      60.00  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.89  
   1280x960      60.00  
   1368x768      60.00  
   1360x768      59.80    59.96  
   1280x800      59.81  
   1152x864      75.00    75.00    70.00    60.00  
   1280x720      60.00  
   1024x768      75.03    70.07    60.00  
   1024x576      60.00  
   832x624       74.55  
   960x540       60.00  
   800x600       72.19    75.00    60.32    56.25  
   864x486       60.00  
   640x480       75.00    72.81    75.00    66.67    59.94  
   720x405       60.00  
   720x400       70.08  
   640x360       60.00  
DP1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 510mm x 287mm
   1920x1080     60.00*+
   1600x1200     60.00  
   1680x1050     59.95  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.89  
   1280x960      60.00  
   1280x800      59.81  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    72.81    66.67    59.94  
   720x400       70.08  
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.769] (==) No Layout section.  Using the first Screen section.
[    20.769] (==) No screen section available. Using defaults.
[    20.769] (**) |-->Screen "Default Screen Section" (0)
[    20.769] (**) |   |-->Monitor "<default monitor>"
[    20.769] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.778] (--) PCI:*(0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    20.778] (II) LoadModule: "glx"
[    20.809] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.994] (II) LoadModule: "intel"
[    20.994] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    21.116] (II) LoadModule: "modesetting"
[    21.116] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.116] (II) LoadModule: "fbdev"
[    21.116] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.116] (II) LoadModule: "vesa"
[    21.116] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.116] (WW) Falling back to old probe method for modesetting
[    21.117] (WW) Falling back to old probe method for fbdev
[    21.117] (II) Loading sub module "fbdevhw"
[    21.117] (II) LoadModule: "fbdevhw"
[    21.117] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.117] (WW) Falling back to old probe method for vesa
[    21.117] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.117] (II) intel(0): Output eDP1 has no monitor section
[    21.132] (II) intel(0): Output HDMI1 has no monitor section
[    21.132] (II) intel(0): Output HDMI2 has no monitor section
[    21.132] (II) intel(0): Output DP1 has no monitor section
[    21.132] (II) intel(0): Output VIRTUAL1 has no monitor section
[    21.132] (II) Loading sub module "dri2"
[    21.132] (II) LoadModule: "dri2"
[    21.132] (II) Loading sub module "present"
[    21.132] (II) LoadModule: "present"
[    21.132] (II) UnloadModule: "modesetting"
[    21.132] (II) UnloadModule: "fbdev"
[    21.132] (II) UnloadModule: "vesa"
[    21.384] (II) GLX: Initialized DRI2 GL provider for screen 0
[    21.437] (II) intel(0): Setting screen physical size to 508 x 285
[    21.667] (II) LoadModule: "evdev"
[    21.667] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-22-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-22-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:1912
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
	card0-eDP-1
output 1:
	card0-DP-1
Number of connected outputs for /dev/dri/card0: 2
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do


============================ Disks SMART Attributes ===========================

### ATA disks: sda sdb

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 20dcca2da
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Jun 11 13:39:49 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   174   172   021    -    2258
  4 Start_Stop_Count        -O--CK   100   100   000    -    165
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    222
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    165
192 Power-Off_Retract_Count -O--CK   200   200   000    -    65
193 Load_Cycle_Count        -O--CK   200   200   000    -    203
194 Temperature_Celsius     -O---K   108   101   000    -    35
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-22-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-00WN4A0
LU WWN Device Id: 5 0014ee 2629cb26a
Firmware Version: 01.01A01
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Jun 11 13:39:49 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   173   170   021    -    2325
  4 Start_Stop_Count        -O--CK   100   100   000    -    288
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    543
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    288
192 Power-Off_Retract_Count -O--CK   200   200   000    -    99
193 Load_Cycle_Count        -O--CK   200   200   000    -    659
194 Temperature_Celsius     -O---K   109   103   000    -    34
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

Ubuntu 20.04.4 LTS

Hors ligne

#24 Le 11/06/2017, à 14:31

Laurent85

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

emena a écrit :

[
- je n'arrive pas à voir certains programmes comme DIA. Ils sont lancés, je les vois dans htop, mais invisibles sur l'écran.

Ça ne vient pas de la carte graphique, vérifie ton affichage. Je vois deux écrans dans bisnext.

Graphics:  Card: Intel Sky Lake Integrated Graphics
           bus-ID: 00:02.0 chip-ID: 8086:1912
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
           GLX Renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2)
           GLX Version: 4.3 Mesa 12.0.6 (compat-v: 3.0) Direct Rendering: Yes

Hors ligne

#25 Le 11/06/2017, à 18:19

emena

Re : [Résolu] Difficultés au démarrage - à cause des cartes graphiques ?

Oups,

On défini ça où ?
Dans le menu avec les paramètres systèmes ?
Je n'ai pas conscience de l'avoir fait, je suis perplexe.

EM

Dernière modification par emena (Le 11/06/2017, à 18:25)


Ubuntu 20.04.4 LTS

Hors ligne