Pages : 1
#1 Le 15/01/2019, à 23:32
- JubuntuX
[Résolu] BOOTLOOP après clonage
Bonjour tous,
Comme dit le titre, je suis confronté à une boucle au login.
Nouveau sur linux, j'ai voulu cloner mon système sur un plus gros disque et intégrer Home à la racine.
Ça n'a pas été si simple et voilà les procédures que j'ai effectué après plusieurs erreurs de débutant.
Je précise que ce sont des disques SSD et que je n'ai pas de partition SWAP ni BOOT, comme c'est conseillé avec 18.04.
Le SSD source était monté en Sata et le destination est en USB3.
Je n'ai pas de carte graphique, seulement le GPU du i5 3570K soit Intel graphique 4000, ou qq chose comme ça.
Les procédures effectuées en plusieurs tentatives, car rien ne s'est fait sans difficultés :
>>> Changement de schéma de partition de GPT à MBR sur la destination
> Ecriture de 0 sur les 4096 premier secteurs
> Gparted : Création schéma MBR + partition de destination
> Gparted : copié-collé de la racine dans la partition neuve
> Gparted : changement d'UUID + flag BOOT
> FSTAB remplacement UUID
> Grub.cfg remplacement manuel d'UUID "au cas où"
>>> Reste a copier ancien Home dans Home racine, une fois que le boot fonctionne
Ensuite avec BOOT-REPAIR:
> Réinstall + update Grub "au cas où"
J'ai un Boot Info Script 8f991e4 + Boot-Repair extra info
http://paste.ubuntu.com/p/P7Ttpzn5rR/
Je remarque que mes 2 disques de données (qui sont encore en NTFS) disposent d'un Grub2 (surement hérité d'une manip hâtive avec boot-repair).
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 root hd0,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 root hd0,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 214,845,439 214,843,392 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 1,953,521,663 1,953,519,616 7 NTFS / exFAT / HPFS
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 1,953,523,711 1,953,521,664 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/sda1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 ext4 NEW3
/dev/sdb1 8EE459B4E4599F71 ntfs DATA-MIRROR-2
/dev/sdc1 01D18EB11361FF00 ntfs DATA-MIRROR-1
/dev/sr0 2018-07-25-05-44-48-00 iso9660 Ubuntu-Budgie 18.04.1 LTS amd64
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 15 19:35 ata-ASUS_DRW-24F1ST_a_S10L68EF102KSZ -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 15 19:49 ata-WDC_WD10EZRX-00L4HB0_WD-WCC4J2929238 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 15 19:49 ata-WDC_WD10EZRX-00L4HB0_WD-WCC4J2929238-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Jan 15 19:49 ata-WDC_WD10EZRX-00L4HB0_WD-WCC4J2929446 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jan 15 19:49 ata-WDC_WD10EZRX-00L4HB0_WD-WCC4J2929446-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Jan 15 19:49 usb-Inateck_NS1066_0123456789ABCDE-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 15 19:49 usb-Inateck_NS1066_0123456789ABCDE-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Jan 15 19:49 wwn-0x50014ee25f38d5c6 -> ../../sdc
lrwxrwxrwx 1 root root 10 Jan 15 19:49 wwn-0x50014ee25f38d5c6-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Jan 15 19:49 wwn-0x50014ee2b48e8b82 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 15 19:49 wwn-0x50014ee2b48e8b82-part1 -> ../../sdb1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
else
search --no-floppy --fs-uuid --set=root 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 60,59,55; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
else
search --no-floppy --fs-uuid --set=root 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
fi
linux /boot/vmlinuz-4.15.0-43-generic root=UUID=1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 ro ipv6.disable=1 quiet splash ipv6.disable=1 $vt_handoff
initrd /boot/initrd.img-4.15.0-43-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3' {
menuentry 'Ubuntu, with Linux 4.15.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-advanced-1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
else
search --no-floppy --fs-uuid --set=root 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
fi
echo 'Loading Linux 4.15.0-43-generic ...'
linux /boot/vmlinuz-4.15.0-43-generic root=UUID=1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 ro ipv6.disable=1 quiet splash ipv6.disable=1 $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-43-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-recovery-1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
else
search --no-floppy --fs-uuid --set=root 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
fi
echo 'Loading Linux 4.15.0-43-generic ...'
linux /boot/vmlinuz-4.15.0-43-generic root=UUID=1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 ro recovery nomodeset ipv6.disable=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-43-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-advanced-1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
else
search --no-floppy --fs-uuid --set=root 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
fi
echo 'Loading Linux 4.15.0-42-generic ...'
linux /boot/vmlinuz-4.15.0-42-generic root=UUID=1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 ro ipv6.disable=1 quiet splash ipv6.disable=1 $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-42-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-recovery-1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
else
search --no-floppy --fs-uuid --set=root 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
fi
echo 'Loading Linux 4.15.0-42-generic ...'
linux /boot/vmlinuz-4.15.0-42-generic root=UUID=1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 ro recovery nomodeset ipv6.disable=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.15.0-42-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
else
search --no-floppy --fs-uuid --set=root 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
else
search --no-floppy --fs-uuid --set=root 1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
#Entry for /dev/sda1 :
UUID=1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3 / ext4 errors=remount-ro 0 1
#Fichiers TMP dans la RAM
tmpfs /tmp tmpfs defaults,size=4g 0 0
#Entry for HDD /dev/sdc1 :
UUID=01D18EB11361FF00 /media/DATA_MIRROR_1 ntfs-3g defaults,locale=fr_FR.UTF-8,umask=000,dmask=027,fmask=137,uid=1000,gid=1000,windows_names 0 0
#Entry for HDD /dev/sdb1 :
UUID=8EE459B4E4599F71 /media/DATA_MIRROR_2 ntfs-3g defaults,locale=fr_FR.UTF-8,umask=000,dmask=027,fmask=137,uid=1000,gid=1000,windows_names 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
14.157890320 = 15.201918976 boot/grub/grub.cfg 1
14.826328278 = 15.919648768 boot/grub/i386-pc/core.img 1
11.477432251 = 12.323799040 boot/vmlinuz-4.15.0-42-generic 2
3.911029816 = 4.199436288 boot/vmlinuz-4.15.0-43-generic 2
3.911029816 = 4.199436288 vmlinuz 2
11.477432251 = 12.323799040 vmlinuz.old 2
13.941707611 = 14.969794560 boot/initrd.img-4.15.0-42-generic 5
17.060256958 = 18.318311424 boot/initrd.img-4.15.0-43-generic 30
17.060256958 = 18.318311424 initrd.img 30
13.941707611 = 14.969794560 initrd.img.old 5
=============================== StdErr Messages: ===============================
File descriptor 10 (/proc/7234/mountinfo) leaked on lvs invocation. Parent PID 20774: bash
File descriptor 63 (pipe:[94637]) leaked on lvs invocation. Parent PID 20774: bash
ADDITIONAL INFORMATION :
=================== log of boot-repair 20190115_1945 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
boot-repair is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/ubuntu-budgie.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type
=================== os-prober:
/dev/sda1:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux
=================== blkid:
/dev/sda1: LABEL="NEW3" UUID="1b3fbc5c-8bea-4616-85aa-f34f2b0bf9b3" TYPE="ext4" PARTUUID="02c92687-01"
/dev/sdb1: LABEL="DATA-MIRROR-2" UUID="8EE459B4E4599F71" TYPE="ntfs" PARTUUID="5fff7071-01"
/dev/sdc1: LABEL="DATA-MIRROR-1" UUID="01D18EB11361FF00" TYPE="ntfs" PARTUUID="61fecd90-01"
/dev/sr0: UUID="2018-07-25-05-44-48-00" LABEL="Ubuntu-Budgie 18.04.1 LTS amd64" TYPE="iso9660" PTUUID="02440d50" PTTYPE="dos"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 nov. 27 21:54 grub.d
total 80
-rwxr-xr-x 1 root root 9783 juil. 17 18:13 00_header
-rwxr-xr-x 1 root root 6258 juil. 16 2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 18:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 18:13 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 18:13 30_os-prober
-rwxr-xr-x 1 root root 1418 juil. 17 18:13 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 17 18:13 40_custom
-rwxr-xr-x 1 root root 216 juil. 17 18:13 41_custom
-rw-r--r-- 1 root root 483 juil. 17 18:13 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash ipv6.disable=1"
GRUB_CMDLINE_LINUX="ipv6.disable=1"
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda1.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb1.
sdc1 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdc1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:msdos:Inateck :;
1:1049kB:110GB:110GB:ext4::boot;
BYT;
/dev/sdb:1000GB:scsi:512:4096:msdos:ATA WDC WD10EZRX-00L:;
1:1049kB:1000GB:1000GB:ntfs::;
BYT;
/dev/sdc:1000GB:scsi:512:4096:msdos:ATA WDC WD10EZRX-00L:;
1:1049kB:1000GB:1000GB:ntfs::;
BYT;
/dev/sr0:1611MB:scsi:2048:2048:mac:ASUS DRW-24F1ST a:;
1:2048B:6143B:4096B::Apple:;
2:6076kB:8468kB:2392kB::EFI:;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1,4G
loop1 loop squashfs 86,9M
loop2 loop squashfs 18,6M
sda disk 232,9G
sda1 part ext4 102,5G NEW3
sdb disk 931,5G
sdb1 part ntfs 931,5G DATA-MIRROR-2
sdc disk 931,5G
sdc1 part ntfs 931,5G DATA-MIRROR-1
sr0 rom iso9660 1,5G Ubuntu-Budgie 18.04.1 LTS amd64
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
loop1 1 1 0 /snap/core/4917
loop2 1 1 0 /snap/ubuntu-budgie-welcome/60
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdc 1 0 0 running
sdc1 1 0 0 /mnt/boot-sav/sdc1
sr0 1 0 1 running /cdrom
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=8135460k,nr_inodes=2033865,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=1631332k,mode=755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14700)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=1631328k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/ubuntu-budgie-welcome_60.snap on /snap/ubuntu-budgie-welcome/60 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdc1 on /mnt/boot-sav/sdc1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 drm_dp_aux2 dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg lightnvm log mapper mcelog mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 57 70 74 00 00 00 00 |.........Wpt....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 71 9f 59 e4 b4 59 e4 8e |........q.Y..Y..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdc1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 f8 5f 70 74 00 00 00 00 |........._pt....|
00000030 ea f6 5b 0c 00 00 00 00 0c 67 97 00 00 00 00 00 |..[......g......|
00000040 f6 00 00 00 01 00 00 00 00 ff 61 13 b1 8e d1 01 |..........a.....|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs tmpfs 1.6G 3.2M 1.6G 1% /run
/dev/sr0 iso9660 1.5G 1.5G 0 100% /cdrom
/dev/loop0 squashfs 1.5G 1.5G 0 100% /rofs
/cow overlay 7.8G 388M 7.5G 5% /
tmpfs tmpfs 7.8G 25M 7.8G 1% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
tmpfs tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
tmpfs tmpfs 7.8G 36K 7.8G 1% /tmp
tmpfs tmpfs 1.6G 60K 1.6G 1% /run/user/999
/dev/loop1 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop2 squashfs 19M 19M 0 100% /snap/ubuntu-budgie-welcome/60
/dev/sda1 ext4 101G 15G 82G 15% /mnt/boot-sav/sda1
/dev/sdb1 fuseblk 932G 834G 98G 90% /mnt/boot-sav/sdb1
/dev/sdc1 fuseblk 932G 851G 82G 92% /mnt/boot-sav/sdc1
=================== fdisk -l:
Disk /dev/loop0: 1.4 GiB, 1520943104 bytes, 2970592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 18.6 MiB, 19517440 bytes, 38120 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x02c92687
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 214845439 214843392 102.5G 83 Linux
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x5fff7071
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 1953521663 1953519616 931.5G 7 HPFS/NTFS/exFAT
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x61fecd90
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 1953523711 1953521664 931.5G 7 HPFS/NTFS/exFAT
adding: 20190115_194549/ (stored 0%)
adding: 20190115_194549/sdc1/ (stored 0%)
adding: 20190115_194549/sdc/ (stored 0%)
adding: 20190115_194549/sdc/partition_table.dmp (deflated 16%)
adding: 20190115_194549/sdc/current_mbr.img (deflated 95%)
adding: 20190115_194549/sdb1/ (stored 0%)
adding: 20190115_194549/sdb/ (stored 0%)
adding: 20190115_194549/sdb/partition_table.dmp (deflated 16%)
adding: 20190115_194549/sdb/current_mbr.imgSET@_progressbar1.pulse()
(deflated 95%)
adding: 20190115_194549/sda1/ (stored 0%)
adding: 20190115_194549/sda1/grubenv (stored 0%)
adding: 20190115_194549/sda/ (stored 0%)
adding: 20190115_194549/sda/partition_table.dmp (deflated 19%)
adding: 20190115_194549/sda/current_mbr.img (deflated 100%)
adding: 20190115_194549/boot-repair.log (deflated 76%)
Gtk-Message: 19:48:49.697: GtkDialog mapped without a transient parent. This is discouraged.
Gtk-Message: 19:49:10.796: GtkDialog mapped without a transient parent. This is discouraged.
=================== Default settings of Boot Repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (Inateck ) !
Les fichiers de démarrage de [Ubuntu 18.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will reinstall the grub2 of sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair will be performed: unhide-bootmenu-10s
Reinstall the GRUB of sda1 into MBRs of all disks (except live-disks and removable disks without OS)
lspci: Unable to load libkmod resources: error -12
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09)
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [1458:d000]
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
*******
grub-install --version
grub-install (GRUB) 2.02-2ubuntu8.9,grub-install (GRUB) 2.
Reinstall the GRUB of sda1 into the MBR of sdb
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sdb: exit code of grub-install /dev/sdb:0
lspci: Unable to load libkmod resources: error -12
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09)
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [1458:d000]
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
*******
grub-install --version
grub-install (GRUB) 2.02-2ubuntu8.9,grub-install (GRUB) 2.
Reinstall the GRUB of sda1 into the MBR of sdc
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sdc: exit code of grub-install /dev/sdc:0
lspci: Unable to load libkmod resources: error -12
*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09)
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [1458:d000]
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
*******
grub-install --version
grub-install (GRUB) 2.02-2ubuntu8.9,grub-install (GRUB) 2.
Reinstall the GRUB of sda1 into the MBR of sda
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0
chroot /mnt/boot-sav/sda1 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.15.0-43-generic
Found initrd image: /boot/initrd.img-4.15.0-43-generic
Found linux image: /boot/vmlinuz-4.15.0-42-generic
Found initrd image: /boot/initrd.img-4.15.0-42-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Unhide GRUB boot menu in sda1/boot/grub/grub.cfg
Le démarrage de l'ordinateur a été correctement réparé.
Vous pouvez maintenant redémarrer votre ordinateur.
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (Inateck ) !
Les fichiers de démarrage de [Ubuntu 18.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)Au boot, que ça soit en UBS3 ou en Sata (sur le même disque), je me trouve donc sur une boucle au login.
Si ça peut servir, sur la fenêtre de boot n'apparait plus mon fond d'écran, c'est un fond noir.
J'ai tenté quelques petites choses comme
https://www.linuxslaves.com/2016/05/3-w … p.html?m=1
Sauf que je ne trouve pas de .Xauthority
J'ai vu qu'il pouvait y avoir une multitude de causes au bootloop c'est pourquoi je viens vous consulter afin que vous me pointiez dans la bonne direction svp. Cela fait déjà plusieurs semaines que je tente ce clonage et là je commence à saturer complet 
Question con: y a t'il dans home des données qui servent au boot? Car comme expliqué plus haut, je n'ai pas encore recopié home dans la racine.
MERCI
Dernière modification par JubuntuX (Le 16/01/2019, à 02:39)
Hors ligne
#2 Le 16/01/2019, à 00:59
- JubuntuX
Re : [Résolu] BOOTLOOP après clonage
Sauf erreur de débutant, il semblerait qu'il n'y ai pas d'utilisateur enregistré sur ce clone...???
cat /etc/passwdRenvoi
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin
bin:x:2:2:bin:/bin:/usr/sbin/nologin
sys:x:3:3:sys:/dev:/usr/sbin/nologin
sync:x:4:65534:sync:/bin:/bin/sync
games:x:5:60:games:/usr/games:/usr/sbin/nologin
man:x:6:12:man:/var/cache/man:/usr/sbin/nologin
lp:x:7:7:lp:/var/spool/lpd:/usr/sbin/nologin
mail:x:8:8:mail:/var/mail:/usr/sbin/nologin
news:x:9:9:news:/var/spool/news:/usr/sbin/nologin
uucp:x:10:10:uucp:/var/spool/uucp:/usr/sbin/nologin
proxy:x:13:13:proxy:/bin:/usr/sbin/nologin
www-data:x:33:33:www-data:/var/www:/usr/sbin/nologin
backup:x:34:34:backup:/var/backups:/usr/sbin/nologin
list:x:38:38:Mailing List Manager:/var/list:/usr/sbin/nologin
irc:x:39:39:ircd:/var/run/ircd:/usr/sbin/nologin
gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/usr/sbin/nologin
nobody:x:65534:65534:nobody:/nonexistent:/usr/sbin/nologin
systemd-network:x:100:102:systemd Network Management,,,:/run/systemd/netif:/usr/sbin/nologin
systemd-resolve:x:101:103:systemd Resolver,,,:/run/systemd/resolve:/usr/sbin/nologin
syslog:x:102:106::/home/syslog:/usr/sbin/nologin
messagebus:x:103:107::/nonexistent:/usr/sbin/nologin
_apt:x:104:65534::/nonexistent:/usr/sbin/nologin
uuidd:x:105:110::/run/uuidd:/usr/sbin/nologin
avahi-autoipd:x:106:111:Avahi autoip daemon,,,:/var/lib/avahi-autoipd:/usr/sbin/nologin
usbmux:x:107:46:usbmux daemon,,,:/var/lib/usbmux:/usr/sbin/nologin
dnsmasq:x:108:65534:dnsmasq,,,:/var/lib/misc:/usr/sbin/nologin
rtkit:x:109:115:RealtimeKit,,,:/proc:/usr/sbin/nologin
lightdm:x:110:116:Light Display Manager:/var/lib/lightdm:/bin/false
cups-pk-helper:x:111:119:user for cups-pk-helper service,,,:/home/cups-pk-helper:/usr/sbin/nologin
speech-dispatcher:x:112:29:Speech Dispatcher,,,:/var/run/speech-dispatcher:/bin/false
whoopsie:x:113:120::/nonexistent:/bin/false
kernoops:x:114:65534:Kernel Oops Tracking Daemon,,,:/:/usr/sbin/nologin
saned:x:115:122::/var/lib/saned:/usr/sbin/nologin
pulse:x:116:123:PulseAudio daemon,,,:/var/run/pulse:/usr/sbin/nologin
nm-openvpn:x:117:125:NetworkManager OpenVPN,,,:/var/lib/openvpn/chroot:/usr/sbin/nologin
avahi:x:118:126:Avahi mDNS daemon,,,:/var/run/avahi-daemon:/usr/sbin/nologin
colord:x:119:127:colord colour management daemon,,,:/var/lib/colord:/usr/sbin/nologin
hplip:x:120:7:HPLIP system user,,,:/var/run/hplip:/bin/false
geoclue:x:121:129::/var/lib/geoclue:/usr/sbin/nologin
ubuntu-budgie:x:999:999:Live session user,,,:/home/ubuntu-budgie:/bin/bashJe ne vois pas le nom de l'utilisateur voulu...
Je brûle ??
Hors ligne
#3 Le 16/01/2019, à 02:38
- JubuntuX
Re : [Résolu] BOOTLOOP après clonage
Bonnnnnn, alors oui en effet sans personne dans le home, personne ne bootera...
> copier les données du home avant de booter.
Voilà en principe la fin de ces bidouilles puisque j'ai retrouvé mon bureau, pas sans mal.
J’espère que ça aidera d'autre novices!
Dernière modification par JubuntuX (Le 16/01/2019, à 02:39)
Hors ligne
Pages : 1