Contenu | Rechercher | Menus

Annonce

Ubuntu-fr vend de superbes t-shirts et de belles clés USB 32Go
Rendez-vous sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 26/01/2020, à 20:10

Yetuntu

[Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,

je viens d'installer Xubuntu 18.04.3 64 bits, le noyau 5.3.0-26, sur un Asus Vivobook F512DA. Le processeur est un AMD Ryzen 5 et la carte graphique une AMD Radeon Vega 8 Graphics. Si nécessaire, le boot-info ici au post 7
J'ai un petit souci d'affichage sur ma télé Sony reliée en HDMI. Au bout d'un moment, l'image devient rose comme ceci:

1580064961.jpg

Parfois, elle reviens à l'état normal, mais pas toujours. Avec un autre portable, même version de Xubuntu je n'avais pas ce problème.
J'ai aussi eu des "freeze" totales du système avec redémarrage sauvage obligé, notamment lors de l'utilisation de Cairo-dock. Mais ça n'a peut être rien à voir.

merci de vos lumières

Dernière modification par Yetuntu (Le 15/03/2020, à 20:30)

Hors ligne

#2 Le 26/01/2020, à 21:01

LukePerp

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,
Est-ce que l'image est rose uniquement sur la TV et pas sur l'écran du pc ? Auquel cas, je cherche pas plus loin, il y a donc un faux contact sur la connexion vers la TV. Soit le connecteur du pc, soit le connecteur de la TV, soit un des connecteurs du câble, soit le cable. Essaye avec un autre écran et un autre cable pour déterminer quel connecteur est défaillant.


Desktop : Ubuntu Mate LTS - Intel i5 - 8 Go - Dual boot Windows 7 hors ligne pour jouer
Laptop : Ubuntu Mate LTS - Intel i5 - 4 Go
Mises à jour silencieuses : Script

Hors ligne

#3 Le 26/01/2020, à 22:06

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Oui, sur la télé uniquement. Le problème pourrait être aussi bête que ça? Merci pour la suggestion, je vais tester

Hors ligne

#4 Le 26/01/2020, à 23:01

Coeur Noir

Re : [Résolu] 2eme écran (HDMI)... tout rose!

+1 Toujours vérifier / éliminer les éventuels problèmes matériels ( connexions, prise, mise sous tension… ) avant de chercher plus loin.

Disposes-tu d'autres moyens de connecter ton pc à ce téléviseur ( vga, dvi ) ? À tester aussi histoire de voir si le problème est spécifique à l'HDMI.

HDMI peut traiter vidéo et audio, ne tester qu'avec la vidéo ?


DébuterDocBien rédigerRetour commandeInsérer image | mes albums <>

Hors ligne

#5 Le 29/01/2020, à 00:17

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bon, j'ai fait le test avec un nouveau cable, avec et sans le son sur l'HDMI; même résultat
J'ai aussi changé le port d'entrée HDMI de la télé et le problème est revenu
Je n'ai pas encore pu tester le VGA ou autre entrée

Je me demande si  ma carte AMD Radeon Vega 8 Graphics est compatible Linux à 100% parce que j'ai aussi des "freeze" du système en lisant certaines vidéos (et je crois aussi avec Cairo-dock)

je vais tester demain le problème sous Windows (je suis en dual-boot) pour exclure un problème du port HDMI de l'ordi

Hors ligne

#6 Le 29/01/2020, à 00:41

Coeur Noir

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Et sans Cairo-dock ? C'est pas un projet abandonné ce truc ? ( forum mort, github quasi plat… ) Ça expliquerait probablement les freezes système, et pas nécessairement l'écran rose.

Dernière modification par Coeur Noir (Le 29/01/2020, à 00:47)


DébuterDocBien rédigerRetour commandeInsérer image | mes albums <>

Hors ligne

#7 Le 31/01/2020, à 21:11

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

J'ai effectué le test avec la session Windows sur le même ordi et je n'ai pas eu l'ombre d'un écran rose. Revenu sur Xubuntu j'ai désinstallé Cairo-Dock, redémarré et l'écran rose est de nouveau apparu.
Il n'y a pas un log que je pourrais consulter?

Hors ligne

#8 Le 16/02/2020, à 19:14

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Pas d'idée quelqu'un pour l'écran rose et les gels du système?

Hors ligne

#9 Le 16/02/2020, à 19:45

Coeur Noir

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Fouiller

dmesg

pour voir s'il renvoie des erreurs concernant la carte graphique ou les écrans ?

Si c'est un problème de prise en charge de la CG, essayer avec un noyau linux plus récent ( genre tester la 20.04 en cours de développement via une session live-usb )


DébuterDocBien rédigerRetour commandeInsérer image | mes albums <>

Hors ligne

#10 Le 16/02/2020, à 23:33

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

J'ai beau fouiner, j'y comprends pas grand chose...
Je vois pas mal de lignes qui ressemblent à des erreurs:

[  +0,000120] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[  +0,000134] pci 0000:00:00.2: can't derive routing for PCI INT A
[  +0,000001] pci 0000:00:00.2: PCI INT A: not connected
[  +0,000009] efifb: Ignoring BGRT: unexpected or invalid BMP data
[  +0,000007] tpm_crb: probe of MSFT0101:00 failed with error -16
[  +0,067392] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[  +0,262414] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536

yet@yet-VivoBook-X512DA-F512DA:~$ dmesg -H
[févr.16 18:31] Linux version 5.3.0-28-generic (buildd@lcy01-amd64-009) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #30~18.04.1-Ubuntu SMP Fri Jan 17 06:14:09 UTC 2020 (Ubuntu 5.3.0-28.30~18.04.1-generic 5.3.13)
[  +0,000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-28-generic root=UUID=6b022efb-2bed-48b8-81e4-8b768689bb60 ro quiet splash vt.handoff=1
[  +0,000000] KERNEL supported cpus:
[  +0,000000]   Intel GenuineIntel
[  +0,000000]   AMD AuthenticAMD
[  +0,000000]   Hygon HygonGenuine
[  +0,000000]   Centaur CentaurHauls
[  +0,000000]   zhaoxin   Shanghai  
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[  +0,000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[  +0,000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[  +0,000000] BIOS-provided physical RAM map:
[  +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[  +0,000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[  +0,000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009601fff] usable
[  +0,000000] BIOS-e820: [mem 0x0000000009602000-0x00000000097fffff] reserved
[  +0,000000] BIOS-e820: [mem 0x0000000009800000-0x000000000a1fffff] usable
[  +0,000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[  +0,000000] BIOS-e820: [mem 0x000000000a20b000-0x00000000dc9b8fff] usable
[  +0,000000] BIOS-e820: [mem 0x00000000dc9b9000-0x00000000dd49cfff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000dd49d000-0x00000000dd4c9fff] ACPI data
[  +0,000000] BIOS-e820: [mem 0x00000000dd4ca000-0x00000000dd678fff] ACPI NVS
[  +0,000000] BIOS-e820: [mem 0x00000000dd679000-0x00000000dde50fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000dde51000-0x00000000ddefbfff] type 20
[  +0,000000] BIOS-e820: [mem 0x00000000ddefc000-0x00000000deffffff] usable
[  +0,000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fdffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
[  +0,000000] BIOS-e820: [mem 0x000000019f000000-0x000000021effffff] reserved
[  +0,000000] BIOS-e820: [mem 0x000000021f000000-0x000000021f33ffff] usable
[  +0,000000] BIOS-e820: [mem 0x000000021f340000-0x000000021fffffff] reserved
[  +0,000000] NX (Execute Disable) protection: active
[  +0,000000] efi: EFI v2.70 by American Megatrends
[  +0,000000] efi:  TPMFinalLog=0xdd631000  ACPI 2.0=0xdd4a6000  ACPI=0xdd4a6000  SMBIOS=0xddd0b000  SMBIOS 3.0=0xddd0a000  ESRT=0xdb713818 
[  +0,000000] secureboot: Secure boot could not be determined (mode 0)
[  +0,000000] SMBIOS 3.2.1 present.
[  +0,000000] DMI: ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X512DA_F512DA/X512DA, BIOS X512DA.308 11/05/2019
[  +0,000000] tsc: Fast TSC calibration using PIT
[  +0,000000] tsc: Detected 2096.167 MHz processor
[  +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[  +0,000001] e820: remove [mem 0x000a0000-0x000fffff] usable
[  +0,000006] last_pfn = 0x21f340 max_arch_pfn = 0x400000000
[  +0,000005] MTRR default type: uncachable
[  +0,000000] MTRR fixed ranges enabled:
[  +0,000001]   00000-9FFFF write-back
[  +0,000001]   A0000-DFFFF uncachable
[  +0,000001]   E0000-FFFFF write-protect
[  +0,000000] MTRR variable ranges enabled:
[  +0,000001]   0 base 000000000000 mask FFFF80000000 write-back
[  +0,000001]   1 base 000080000000 mask FFFFC0000000 write-back
[  +0,000001]   2 base 0000C0000000 mask FFFFE0000000 write-back
[  +0,000000]   3 disabled
[  +0,000001]   4 disabled
[  +0,000000]   5 disabled
[  +0,000000]   6 disabled
[  +0,000001]   7 disabled
[  +0,000000] TOM2: 0000000220000000 aka 8704M
[  +0,000331] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[  +0,000086] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[  +0,000006] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[  +0,003666] esrt: Reserving ESRT space from 0x00000000db713818 to 0x00000000db713850.
[  +0,000037] check: Scanning 1 areas for low memory corruption
[  +0,000009] Using GB pages for direct mapping
[  +0,000002] BRK [0x25401000, 0x25401fff] PGTABLE
[  +0,000001] BRK [0x25402000, 0x25402fff] PGTABLE
[  +0,000001] BRK [0x25403000, 0x25403fff] PGTABLE
[  +0,000046] BRK [0x25404000, 0x25404fff] PGTABLE
[  +0,000001] BRK [0x25405000, 0x25405fff] PGTABLE
[  +0,000048] BRK [0x25406000, 0x25406fff] PGTABLE
[  +0,000154] BRK [0x25407000, 0x25407fff] PGTABLE
[  +0,000313] BRK [0x25408000, 0x25408fff] PGTABLE
[  +0,000125] BRK [0x25409000, 0x25409fff] PGTABLE
[  +0,000064] RAMDISK: [mem 0x300a5000-0x34049fff]
[  +0,000014] ACPI: Early table checksum verification disabled
[  +0,000003] ACPI: RSDP 0x00000000DD4A6000 000024 (v02 _ASUS_)
[  +0,000003] ACPI: XSDT 0x00000000DD4A60A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[  +0,000004] ACPI: FACP 0x00000000DD4B1430 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[  +0,000005] ACPI: DSDT 0x00000000DD4A6210 00B21B (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[  +0,000002] ACPI: FACS 0x00000000DD630D80 000040
[  +0,000002] ACPI: APIC 0x00000000DD4B1548 0000DE (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[  +0,000002] ACPI: FPDT 0x00000000DD4B1628 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[  +0,000002] ACPI: FIDT 0x00000000DD4B1670 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[  +0,000002] ACPI: ECDT 0x00000000DD4B1710 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[  +0,000002] ACPI: SSDT 0x00000000DD4B17D8 005419 (v02 AMD    AmdTable 00000002 MSFT 02000002)
[  +0,000002] ACPI: MCFG 0x00000000DD4B6BF8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
[  +0,000002] ACPI: MSDM 0x00000000DD4B6C38 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[  +0,000002] ACPI: HPET 0x00000000DD4B6C90 000038 (v01 _ASUS_ Notebook 01072009 AMI  00000005)
[  +0,000002] ACPI: UEFI 0x00000000DD4B6CC8 000042 (v01 _ASUS_ Notebook 00000002      01000013)
[  +0,000001] ACPI: VFCT 0x00000000DD4B6D10 00D484 (v01 _ASUS_ Notebook 00000001 AMD  31504F47)
[  +0,000002] ACPI: BGRT 0x00000000DD4C4198 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[  +0,000002] ACPI: TPM2 0x00000000DD4C41D0 000038 (v04 _ASUS_ Notebook 00000001 AMI  00000000)
[  +0,000002] ACPI: IVRS 0x00000000DD4C4208 00013E (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[  +0,000002] ACPI: SSDT 0x00000000DD4C4348 00119C (v01 AMD    AMD CPU  00000001 AMD  00000001)
[  +0,000002] ACPI: CRAT 0x00000000DD4C54E8 000810 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[  +0,000002] ACPI: CDIT 0x00000000DD4C5CF8 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[  +0,000002] ACPI: SSDT 0x00000000DD4C5D28 000C33 (v01 AMD    AmdTable 00000001 INTL 20120913)
[  +0,000002] ACPI: SSDT 0x00000000DD4C6960 0010AC (v01 AMD    AmdTable 00000001 INTL 20120913)
[  +0,000002] ACPI: SSDT 0x00000000DD4C7A10 0002EA (v01 AMD    AmdTable 00000001 INTL 20120913)
[  +0,000002] ACPI: SSDT 0x00000000DD4C7D00 001C69 (v01 AMD    AmdTable 00000001 INTL 20120913)
[  +0,000002] ACPI: WSMT 0x00000000DD4C9970 000028 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[  +0,000008] ACPI: Local APIC address 0xfee00000
[  +0,000110] No NUMA configuration found
[  +0,000001] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff]
[  +0,000007] NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff]
[  +0,000162] Zone ranges:
[  +0,000001]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[  +0,000001]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[  +0,000000]   Normal   [mem 0x0000000100000000-0x000000021f33ffff]
[  +0,000001]   Device   empty
[  +0,000001] Movable zone start for each node
[  +0,000002] Early memory node ranges
[  +0,000001]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[  +0,000000]   node   0: [mem 0x0000000000100000-0x0000000009601fff]
[  +0,000001]   node   0: [mem 0x0000000009800000-0x000000000a1fffff]
[  +0,000000]   node   0: [mem 0x000000000a20b000-0x00000000dc9b8fff]
[  +0,000001]   node   0: [mem 0x00000000ddefc000-0x00000000deffffff]
[  +0,000000]   node   0: [mem 0x0000000100000000-0x000000019effffff]
[  +0,000001]   node   0: [mem 0x000000021f000000-0x000000021f33ffff]
[  +0,000215] Zeroed struct page in unavailable ranges: 42925 pages
[  +0,000001] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff]
[  +0,000001] On node 0 totalpages: 1559443
[  +0,000001]   DMA zone: 64 pages used for memmap
[  +0,000000]   DMA zone: 28 pages reserved
[  +0,000001]   DMA zone: 3999 pages, LIFO batch:0
[  +0,000040]   DMA32 zone: 14115 pages used for memmap
[  +0,000001]   DMA32 zone: 903348 pages, LIFO batch:63
[  +0,010171]   Normal zone: 10189 pages used for memmap
[  +0,000002]   Normal zone: 652096 pages, LIFO batch:63
[  +0,009580] ACPI: PM-Timer IO Port: 0x808
[  +0,000003] ACPI: Local APIC address 0xfee00000
[  +0,000007] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[  +0,000015] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[  +0,000011] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
[  +0,000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[  +0,000001] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[  +0,000001] ACPI: IRQ0 used by override.
[  +0,000001] ACPI: IRQ9 used by override.
[  +0,000002] Using ACPI (MADT) for SMP configuration information
[  +0,000001] ACPI: HPET id: 0x10228201 base: 0xfed00000
[  +0,000016] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[  +0,000024] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[  +0,000001] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[  +0,000002] PM: Registered nosave memory: [mem 0x09602000-0x097fffff]
[  +0,000001] PM: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
[  +0,000001] PM: Registered nosave memory: [mem 0xdc9b9000-0xdd49cfff]
[  +0,000000] PM: Registered nosave memory: [mem 0xdd49d000-0xdd4c9fff]
[  +0,000001] PM: Registered nosave memory: [mem 0xdd4ca000-0xdd678fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xdd679000-0xdde50fff]
[  +0,000001] PM: Registered nosave memory: [mem 0xdde51000-0xddefbfff]
[  +0,000001] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[  +0,000001] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfd000000-0xfdffffff]
[  +0,000001] PM: Registered nosave memory: [mem 0xfe000000-0xfeb7ffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[  +0,000001] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[  +0,000001] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[  +0,000001] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[  +0,000001] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[  +0,000001] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[  +0,000001] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[  +0,000001] PM: Registered nosave memory: [mem 0x19f000000-0x21effffff]
[  +0,000002] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[  +0,000001] Booting paravirtualized kernel on bare hardware
[  +0,000004] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[  +0,000007] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[  +0,000771] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[  +0,000008] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[  +0,000001] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[  +0,000029] Built 1 zonelists, mobility grouping on.  Total pages: 1535047
[  +0,000001] Policy zone: Normal
[  +0,000001] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-28-generic root=UUID=6b022efb-2bed-48b8-81e4-8b768689bb60 ro quiet splash vt.handoff=1
[  +0,001080] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[  +0,000472] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[  +0,000043] mem auto-init: stack:off, heap alloc:on, heap free:off
[  +0,007004] Calgary: detecting Calgary via BIOS EBDA area
[  +0,000001] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[  +0,013931] Memory: 5889616K/6237772K available (14339K kernel code, 2370K rwdata, 4668K rodata, 2660K init, 5076K bss, 348156K reserved, 0K cma-reserved)
[  +0,000389] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[  +0,000026] ftrace: allocating 42927 entries in 168 pages
[  +0,012847] rcu: Hierarchical RCU implementation.
[  +0,000002] rcu:      RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[  +0,000001]   Tasks RCU enabled.
[  +0,000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[  +0,000001] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[  +0,002308] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[  +0,000572] random: crng done (trusting CPU's manufacturer)
[  +0,000030] vt handoff: transparent VT on vt#1
[  +0,000006] Console: colour dummy device 80x25
[  +0,000003] printk: console [tty0] enabled
[  +0,000022] ACPI: Core revision 20190703
[  +0,000187] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[  +0,000022] APIC: Switch to symmetric I/O mode setup
[  +0,000837] AMD-Vi: ivrs, add hid:PNPD0040, uid:, rdevid:152
[  +0,179867] Switched APIC routing to physical flat.
[  +0,001110] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[  +0,018182] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e370bb546f, max_idle_ns: 440795256759 ns
[  +0,000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.33 BogoMIPS (lpj=8384668)
[  +0,000002] pid_max: default: 32768 minimum: 301
[  +0,002761] LSM: Security Framework initializing
[  +0,000018] Yama: becoming mindful.
[  +0,000125] AppArmor: AppArmor initialized
[  +0,000101] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[  +0,000034] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[  +0,000269] *** VALIDATE proc ***
[  +0,000055] *** VALIDATE cgroup1 ***
[  +0,000001] *** VALIDATE cgroup2 ***
[  +0,000102] LVT offset 1 assigned for vector 0xf9
[  +0,000049] LVT offset 2 assigned for vector 0xf4
[  +0,000015] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[  +0,000000] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[  +0,000004] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[  +0,000001] Spectre V2 : Mitigation: Full AMD retpoline
[  +0,000000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[  +0,000001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[  +0,000001] Spectre V2 : User space: Vulnerable
[  +0,000001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[  +0,000208] Freeing SMP alternatives memory: 40K
[  +0,112259] smpboot: CPU0: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x18, stepping: 0x1)
[  +0,000198] Performance Events: Fam17h core perfctr, AMD PMU driver.
[  +0,000004] ... version:                0
[  +0,000001] ... bit width:              48
[  +0,000000] ... generic registers:      6
[  +0,000001] ... value mask:             0000ffffffffffff
[  +0,000000] ... max period:             00007fffffffffff
[  +0,000000] ... fixed-purpose events:   0
[  +0,000001] ... event mask:             000000000000003f
[  +0,000038] rcu: Hierarchical SRCU implementation.
[  +0,000684] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[  +0,000216] smp: Bringing up secondary CPUs ...
[  +0,000131] x86: Booting SMP configuration:
[  +0,000001] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7
[  +0,016730] smp: Brought up 1 node, 8 CPUs
[  +0,000000] smpboot: Max logical packages: 2
[  +0,000000] smpboot: Total of 8 processors activated (33538.67 BogoMIPS)
[  +0,000000] devtmpfs: initialized
[  +0,000000] x86/mm: Memory block size: 128MB
[  +0,002000] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[  +0,000001] PM: Registering ACPI NVS region [mem 0xdd4ca000-0xdd678fff] (1765376 bytes)
[  +0,000073] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[  +0,000000] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[  +0,000236] pinctrl core: initialized pinctrl subsystem
[  +0,000164] PM: RTC time: 17:31:39, date: 2020-02-16
[  +0,000322] NET: Registered protocol family 16
[  +0,000117] audit: initializing netlink subsys (disabled)
[  +0,000016] audit: type=2000 audit(1581874298.160:1): state=initialized audit_enabled=0 res=1
[  +0,000000] EISA bus registered
[  +0,000000] cpuidle: using governor ladder
[  +0,000000] cpuidle: using governor menu
[  +0,000000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[  +0,000000] ACPI: bus type PCI registered
[  +0,000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[  +0,000000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[  +0,000000] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[  +0,000000] PCI: Using configuration type 1 for base access
[  +0,003449] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[  +0,000000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[  +0,003710] ACPI: Added _OSI(Module Device)
[  +0,000001] ACPI: Added _OSI(Processor Device)
[  +0,000000] ACPI: Added _OSI(3.0 _SCP Extensions)
[  +0,000001] ACPI: Added _OSI(Processor Aggregator Device)
[  +0,000001] ACPI: Added _OSI(Linux-Dell-Video)
[  +0,000000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[  +0,000001] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[  +0,014488] ACPI: 7 ACPI AML tables successfully acquired and loaded
[  +0,000582] ACPI: EC: EC started
[  +0,000000] ACPI: EC: interrupt blocked
[  +0,000461] ACPI: \: Used as first EC
[  +0,000001] ACPI: \: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[  +0,000000] ACPI: EC: Boot ECDT EC used to handle transactions
[  +0,000535] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[  +0,002537] ACPI: Interpreter enabled
[  +0,000015] ACPI: (supports S0 S3 S4 S5)
[  +0,000001] ACPI: Using IOAPIC for interrupt routing
[  +0,000200] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[  +0,000265] ACPI: Enabled 2 GPEs in block 00 to 1F
[  +0,006390] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[  +0,000004] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[  +0,000170] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[  +0,000162] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[  +0,000001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[  +0,000010] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[  +0,000349] PCI host bridge to bus 0000:00
[  +0,000002] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[  +0,000001] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[  +0,000001] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[  +0,000001] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[  +0,000000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[  +0,000001] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[  +0,000001] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window]
[  +0,000001] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[  +0,000001] pci_bus 0000:00: root bus resource [bus 00-ff]
[  +0,000011] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[  +0,000149] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[  +0,000198] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[  +0,000140] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
[  +0,000109] pci 0000:00:01.2: enabling Extended Tags
[  +0,000148] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[  +0,000162] pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400
[  +0,000107] pci 0000:00:01.3: enabling Extended Tags
[  +0,000128] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[  +0,000157] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[  +0,000130] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[  +0,000040] pci 0000:00:08.1: enabling Extended Tags
[  +0,000042] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[  +0,000074] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[  +0,000040] pci 0000:00:08.2: enabling Extended Tags
[  +0,000043] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[  +0,000109] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[  +0,000137] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[  +0,000140] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[  +0,000046] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[  +0,000052] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[  +0,000046] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[  +0,000046] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[  +0,000045] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[  +0,000045] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[  +0,000048] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[  +0,000324] pci 0000:01:00.0: [168c:0042] type 00 class 0x028000
[  +0,000255] pci 0000:01:00.0: reg 0x10: [mem 0xfe200000-0xfe3fffff 64bit]
[  +0,000905] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[  +0,000818] pci 0000:00:01.2: PCI bridge to [bus 01]
[  +0,000005] pci 0000:00:01.2:   bridge window [mem 0xfe200000-0xfe3fffff]
[  +0,000199] pci 0000:02:00.0: [8086:f1a8] type 00 class 0x010802
[  +0,000028] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe903fff 64bit]
[  +0,000244] pci 0000:00:01.3: PCI bridge to [bus 02]
[  +0,000005] pci 0000:00:01.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[  +0,000097] pci 0000:03:00.0: [1002:15d8] type 00 class 0x030000
[  +0,000027] pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[  +0,000011] pci 0000:03:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[  +0,000007] pci 0000:03:00.0: reg 0x20: [io  0xf000-0xf0ff]
[  +0,000007] pci 0000:03:00.0: reg 0x24: [mem 0xfe700000-0xfe77ffff]
[  +0,000013] pci 0000:03:00.0: enabling Extended Tags
[  +0,000010] pci 0000:03:00.0: BAR 0: assigned to efifb
[  +0,000061] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[  +0,000089] pci 0000:03:00.1: [1002:15de] type 00 class 0x040300
[  +0,000016] pci 0000:03:00.1: reg 0x10: [mem 0xfe7c8000-0xfe7cbfff]
[  +0,000032] pci 0000:03:00.1: enabling Extended Tags
[  +0,000043] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[  +0,000058] pci 0000:03:00.2: [1022:15df] type 00 class 0x108000
[  +0,000024] pci 0000:03:00.2: reg 0x18: [mem 0xfe600000-0xfe6fffff]
[  +0,000014] pci 0000:03:00.2: reg 0x24: [mem 0xfe7cc000-0xfe7cdfff]
[  +0,000010] pci 0000:03:00.2: enabling Extended Tags
[  +0,000112] pci 0000:03:00.3: [1022:15e0] type 00 class 0x0c0330
[  +0,000021] pci 0000:03:00.3: reg 0x10: [mem 0xfe500000-0xfe5fffff 64bit]
[  +0,000036] pci 0000:03:00.3: enabling Extended Tags
[  +0,000047] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[  +0,000066] pci 0000:03:00.4: [1022:15e1] type 00 class 0x0c0330
[  +0,000021] pci 0000:03:00.4: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
[  +0,000036] pci 0000:03:00.4: enabling Extended Tags
[  +0,000047] pci 0000:03:00.4: PME# supported from D0 D3hot D3cold
[  +0,000068] pci 0000:03:00.5: [1022:15e2] type 00 class 0x048000
[  +0,000015] pci 0000:03:00.5: reg 0x10: [mem 0xfe780000-0xfe7bffff]
[  +0,000032] pci 0000:03:00.5: enabling Extended Tags
[  +0,000043] pci 0000:03:00.5: PME# supported from D0 D3hot D3cold
[  +0,000064] pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300
[  +0,000016] pci 0000:03:00.6: reg 0x10: [mem 0xfe7c0000-0xfe7c7fff]
[  +0,000032] pci 0000:03:00.6: enabling Extended Tags
[  +0,000042] pci 0000:03:00.6: PME# supported from D0 D3hot D3cold
[  +0,000098] pci 0000:00:08.1: PCI bridge to [bus 03]
[  +0,000005] pci 0000:00:08.1:   bridge window [io  0xf000-0xffff]
[  +0,000003] pci 0000:00:08.1:   bridge window [mem 0xfe400000-0xfe7fffff]
[  +0,000004] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[  +0,000066] pci 0000:04:00.0: [1022:7901] type 00 class 0x010601
[  +0,000050] pci 0000:04:00.0: reg 0x24: [mem 0xfe800000-0xfe8007ff]
[  +0,000012] pci 0000:04:00.0: enabling Extended Tags
[  +0,000054] pci 0000:04:00.0: PME# supported from D3hot D3cold
[  +0,000099] pci 0000:00:08.2: PCI bridge to [bus 04]
[  +0,000005] pci 0000:00:08.2:   bridge window [mem 0xfe800000-0xfe8fffff]
[  +0,000456] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[  +0,000057] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[  +0,000050] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[  +0,000062] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[  +0,000056] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[  +0,000045] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[  +0,000046] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[  +0,000045] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[  +0,000574] ACPI: EC: interrupt unblocked
[  +0,000000] ACPI: EC: event unblocked
[  +0,000003] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[  +0,000000] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
[  +0,000000] SCSI subsystem initialized
[  +0,000000] libata version 3.00 loaded.
[  +0,000000] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[  +0,000000] pci 0000:03:00.0: vgaarb: bridge control possible
[  +0,000000] pci 0000:03:00.0: vgaarb: setting as boot device
[  +0,000000] vgaarb: loaded
[  +0,000000] ACPI: bus type USB registered
[  +0,000000] usbcore: registered new interface driver usbfs
[  +0,000000] usbcore: registered new interface driver hub
[  +0,000000] usbcore: registered new device driver usb
[  +0,001541] pps_core: LinuxPPS API ver. 1 registered
[  +0,000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[  +0,000000] PTP clock support registered
[  +0,000021] EDAC MC: Ver: 3.0.0
[  +0,000198] Registered efivars operations
[  +0,000000] PCI: Using ACPI for IRQ routing
[  +0,000000] PCI: pci_cache_line_size set to 64 bytes
[  +0,000120] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[  +0,000001] e820: reserve RAM buffer [mem 0x09602000-0x0bffffff]
[  +0,000001] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[  +0,000001] e820: reserve RAM buffer [mem 0xdc9b9000-0xdfffffff]
[  +0,000001] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[  +0,000000] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
[  +0,000001] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff]
[  +0,000085] NetLabel: Initializing
[  +0,000001] NetLabel:  domain hash size = 128
[  +0,000000] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[  +0,000010] NetLabel:  unlabeled traffic allowed by default
[  +0,003599] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[  +0,000002] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[  +0,002482] clocksource: Switched to clocksource tsc-early
[  +0,008373] VFS: Disk quotas dquot_6.6.0
[  +0,000024] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  +0,000043] *** VALIDATE hugetlbfs ***
[  +0,000080] AppArmor: AppArmor Filesystem Enabled
[  +0,000030] pnp: PnP ACPI init
[  +0,000141] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[  +0,000005] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[  +0,000140] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[  +0,000214] system 00:03: [io  0x04d0-0x04d1] has been reserved
[  +0,000001] system 00:03: [io  0x040b] has been reserved
[  +0,000001] system 00:03: [io  0x04d6] has been reserved
[  +0,000001] system 00:03: [io  0x0c00-0x0c01] has been reserved
[  +0,000001] system 00:03: [io  0x0c14] has been reserved
[  +0,000001] system 00:03: [io  0x0c50-0x0c51] has been reserved
[  +0,000001] system 00:03: [io  0x0c52] has been reserved
[  +0,000000] system 00:03: [io  0x0c6c] has been reserved
[  +0,000001] system 00:03: [io  0x0c6f] has been reserved
[  +0,000001] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[  +0,000001] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[  +0,000001] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[  +0,000000] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[  +0,000001] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[  +0,000001] system 00:03: [io  0x0800-0x089f] has been reserved
[  +0,000001] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[  +0,000001] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[  +0,000000] system 00:03: [io  0x0900-0x090f] has been reserved
[  +0,000001] system 00:03: [io  0x0910-0x091f] has been reserved
[  +0,000002] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[  +0,000001] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[  +0,000000] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[  +0,000001] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[  +0,000001] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[  +0,000001] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[  +0,000001] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[  +0,000003] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000493] pnp: PnP ACPI: found 4 devices
[  +0,001382] thermal_sys: Registered thermal governor 'fair_share'
[  +0,000000] thermal_sys: Registered thermal governor 'bang_bang'
[  +0,000001] thermal_sys: Registered thermal governor 'step_wise'
[  +0,000000] thermal_sys: Registered thermal governor 'user_space'
[  +0,000000] thermal_sys: Registered thermal governor 'power_allocator'
[  +0,004568] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[  +0,000026] pci 0000:00:01.2: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[  +0,000002] pci 0000:00:01.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[  +0,000008] pci 0000:00:01.2: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[  +0,000002] pci 0000:00:01.2: BAR 13: assigned [io  0x1000-0x1fff]
[  +0,000002] pci 0000:00:01.2: PCI bridge to [bus 01]
[  +0,000004] pci 0000:00:01.2:   bridge window [io  0x1000-0x1fff]
[  +0,000007] pci 0000:00:01.2:   bridge window [mem 0xfe200000-0xfe3fffff]
[  +0,000005] pci 0000:00:01.2:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[  +0,000009] pci 0000:00:01.3: PCI bridge to [bus 02]
[  +0,000007] pci 0000:00:01.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[  +0,000014] pci 0000:00:08.1: PCI bridge to [bus 03]
[  +0,000006] pci 0000:00:08.1:   bridge window [io  0xf000-0xffff]
[  +0,000003] pci 0000:00:08.1:   bridge window [mem 0xfe400000-0xfe7fffff]
[  +0,000003] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[  +0,000004] pci 0000:00:08.2: PCI bridge to [bus 04]
[  +0,000004] pci 0000:00:08.2:   bridge window [mem 0xfe800000-0xfe8fffff]
[  +0,000006] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[  +0,000001] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[  +0,000001] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[  +0,000001] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[  +0,000000] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[  +0,000001] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[  +0,000001] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfebfffff window]
[  +0,000001] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[  +0,000000] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[  +0,000001] pci_bus 0000:01: resource 1 [mem 0xfe200000-0xfe3fffff]
[  +0,000001] pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[  +0,000001] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[  +0,000000] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[  +0,000001] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe7fffff]
[  +0,000001] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[  +0,000001] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[  +0,000101] NET: Registered protocol family 2
[  +0,000150] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[  +0,000057] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[  +0,000165] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[  +0,000074] TCP: Hash tables configured (established 65536 bind 65536)
[  +0,000040] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[  +0,000022] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[  +0,000112] NET: Registered protocol family 1
[  +0,000004] NET: Registered protocol family 44
[  +0,000161] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[  +0,000307] PCI: CLS 64 bytes, default 64
[  +0,000048] Trying to unpack rootfs image as initramfs...
[  +0,669335] Freeing initrd memory: 65172K
[  +0,000071] pci 0000:00:00.2: AMD-Vi: Unable to write to IOMMU perf counter.
[  +0,000134] pci 0000:00:00.2: can't derive routing for PCI INT A
[  +0,000001] pci 0000:00:00.2: PCI INT A: not connected
[  +0,000372] pci 0000:00:01.0: Adding to iommu group 0
[  +0,000156] pci 0000:00:01.2: Adding to iommu group 1
[  +0,000193] pci 0000:00:01.3: Adding to iommu group 2
[  +0,000142] pci 0000:00:08.0: Adding to iommu group 3
[  +0,000169] pci 0000:00:08.1: Adding to iommu group 4
[  +0,000160] pci 0000:00:08.2: Adding to iommu group 5
[  +0,000131] pci 0000:00:14.0: Adding to iommu group 6
[  +0,000019] pci 0000:00:14.3: Adding to iommu group 6
[  +0,000184] pci 0000:00:18.0: Adding to iommu group 7
[  +0,000020] pci 0000:00:18.1: Adding to iommu group 7
[  +0,000018] pci 0000:00:18.2: Adding to iommu group 7
[  +0,000018] pci 0000:00:18.3: Adding to iommu group 7
[  +0,000018] pci 0000:00:18.4: Adding to iommu group 7
[  +0,000022] pci 0000:00:18.5: Adding to iommu group 7
[  +0,000018] pci 0000:00:18.6: Adding to iommu group 7
[  +0,000019] pci 0000:00:18.7: Adding to iommu group 7
[  +0,000221] pci 0000:01:00.0: Adding to iommu group 8
[  +0,000270] pci 0000:02:00.0: Adding to iommu group 9
[  +0,000260] pci 0000:03:00.0: Adding to iommu group 10
[  +0,000166] pci 0000:03:00.0: Using iommu direct mapping
[  +0,000078] pci 0000:03:00.1: Adding to iommu group 11
[  +0,000031] pci 0000:03:00.2: Adding to iommu group 11
[  +0,000030] pci 0000:03:00.3: Adding to iommu group 11
[  +0,000030] pci 0000:03:00.4: Adding to iommu group 11
[  +0,000030] pci 0000:03:00.5: Adding to iommu group 11
[  +0,000032] pci 0000:03:00.6: Adding to iommu group 11
[  +0,000156] pci 0000:04:00.0: Adding to iommu group 12
[  +0,000323] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[  +0,000001] pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
[  +0,000001]  PPR NX GT IA GA PC GA_vAPIC
[  +0,000002] AMD-Vi: Interrupt remapping enabled
[  +0,000000] AMD-Vi: Virtual APIC enabled
[  +0,000218] AMD-Vi: Lazy IO/TLB flushing enabled
[  +0,000846] amd_uncore: AMD NB counters detected
[  +0,000003] amd_uncore: AMD LLC counters detected
[  +0,000307] check: Scanning for low memory corruption every 60 seconds
[  +0,001910] Initialise system trusted keyrings
[  +0,000022] Key type blacklist registered
[  +0,000091] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[  +0,001172] zbud: loaded
[  +0,000450] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  +0,000235] fuse: init (API version 7.31)
[  +0,000163] Platform Keyring initialized
[  +0,004422] Key type asymmetric registered
[  +0,000002] Asymmetric key parser 'x509' registered
[  +0,000011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[  +0,000065] io scheduler mq-deadline registered
[  +0,000890] pcieport 0000:00:01.2: PME: Signaling with IRQ 26
[  +0,000125] pcieport 0000:00:01.2: AER: enabled with IRQ 26
[  +0,000034] pcieport 0000:00:01.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[  +0,000353] pcieport 0000:00:01.3: PME: Signaling with IRQ 27
[  +0,000133] pcieport 0000:00:01.3: AER: enabled with IRQ 27
[  +0,000206] pcieport 0000:00:08.1: PME: Signaling with IRQ 28
[  +0,000223] pcieport 0000:00:08.2: PME: Signaling with IRQ 29
[  +0,000105] pcieport 0000:00:08.2: AER: enabled with IRQ 29
[  +0,000062] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  +0,000066] efifb: probing for efifb
[  +0,000009] efifb: Ignoring BGRT: unexpected or invalid BMP data
[  +0,000001] efifb: framebuffer at 0xe0000000, using 1984k, total 1984k
[  +0,000001] efifb: mode is 800x600x32, linelength=3328, pages=1
[  +0,000000] efifb: scrolling: redraw
[  +0,000001] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[  +0,000059] fbcon: Deferring console take-over
[  +0,000000] fb0: EFI VGA frame buffer device
[  +0,001738] ACPI: AC Adapter [AC0] (on-line)
[  +0,000047] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:39/PNP0C09:00/PNP0C0D:00/input/input0
[  +0,000005] ACPI: Lid Switch [LID]
[  +0,000021] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[  +0,000005] ACPI: Power Button [PWRB]
[  +0,000024] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[  +0,000004] ACPI: Sleep Button [SLPB]
[  +0,000023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[  +0,000012] ACPI: Power Button [PWRF]
[  +0,000064] Monitor-Mwait will be used to enter C-1 state
[  +0,001713] thermal LNXTHERM:00: registered as thermal_zone0
[  +0,000001] ACPI: Thermal Zone [THRM] (84 C)
[  +0,000117] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[  +0,001630] Linux agpgart interface v0.103
[  +0,012860] tpm_crb MSFT0101:00: can't request region for resource [mem 0xdd471000-0xdd474fff]
[  +0,000007] tpm_crb: probe of MSFT0101:00 failed with error -16
[  +0,001046] battery: ACPI: Battery Slot [BAT0] (battery present)
[  +0,001862] loop: module loaded
[  +0,000222] libphy: Fixed MDIO Bus: probed
[  +0,000001] tun: Universal TUN/TAP device driver, 1.6
[  +0,000026] PPP generic driver version 2.4.2
[  +0,000040] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  +0,000003] ehci-pci: EHCI PCI platform driver
[  +0,000018] ehci-platform: EHCI generic platform driver
[  +0,000008] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  +0,000005] ohci-pci: OHCI PCI platform driver
[  +0,000006] ohci-platform: OHCI generic platform driver
[  +0,000004] uhci_hcd: USB Universal Host Controller Interface driver
[  +0,000143] xhci_hcd 0000:03:00.3: xHCI Host Controller
[  +0,000010] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1
[  +0,000203] xhci_hcd 0000:03:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
[  +0,000579] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[  +0,000001] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000002] usb usb1: Product: xHCI Host Controller
[  +0,000001] usb usb1: Manufacturer: Linux 5.3.0-28-generic xhci-hcd
[  +0,000001] usb usb1: SerialNumber: 0000:03:00.3
[  +0,000090] hub 1-0:1.0: USB hub found
[  +0,000015] hub 1-0:1.0: 4 ports detected
[  +0,000844] xhci_hcd 0000:03:00.3: xHCI Host Controller
[  +0,000003] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
[  +0,000002] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[  +0,000029] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[  +0,000016] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[  +0,000001] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000001] usb usb2: Product: xHCI Host Controller
[  +0,000001] usb usb2: Manufacturer: Linux 5.3.0-28-generic xhci-hcd
[  +0,000000] usb usb2: SerialNumber: 0000:03:00.3
[  +0,000074] hub 2-0:1.0: USB hub found
[  +0,000013] hub 2-0:1.0: 4 ports detected
[  +0,000841] xhci_hcd 0000:03:00.4: xHCI Host Controller
[  +0,000003] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3
[  +0,000188] xhci_hcd 0000:03:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
[  +0,000440] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[  +0,000001] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000001] usb usb3: Product: xHCI Host Controller
[  +0,000001] usb usb3: Manufacturer: Linux 5.3.0-28-generic xhci-hcd
[  +0,000001] usb usb3: SerialNumber: 0000:03:00.4
[  +0,000072] hub 3-0:1.0: USB hub found
[  +0,000011] hub 3-0:1.0: 2 ports detected
[  +0,000213] xhci_hcd 0000:03:00.4: xHCI Host Controller
[  +0,000004] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4
[  +0,000002] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[  +0,000025] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  +0,000015] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[  +0,000000] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000001] usb usb4: Product: xHCI Host Controller
[  +0,000001] usb usb4: Manufacturer: Linux 5.3.0-28-generic xhci-hcd
[  +0,000001] usb usb4: SerialNumber: 0000:03:00.4
[  +0,000075] hub 4-0:1.0: USB hub found
[  +0,000010] hub 4-0:1.0: 1 port detected
[  +0,000143] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[  +0,000000] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[  +0,001809] serio: i8042 KBD port at 0x60,0x64 irq 1
[  +0,000076] mousedev: PS/2 mouse device common for all mice
[  +0,001011] rtc_cmos 00:01: RTC can wake from S4
[  +0,000236] rtc_cmos 00:01: registered as rtc0
[  +0,000018] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[  +0,000007] i2c /dev entries driver
[  +0,000081] device-mapper: uevent: version 1.0.3
[  +0,000083] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[  +0,000022] platform eisa.0: Probing EISA bus 0
[  +0,000002] platform eisa.0: EISA: Cannot allocate resource for mainboard
[  +0,000002] platform eisa.0: Cannot allocate resource for EISA slot 1
[  +0,000001] platform eisa.0: Cannot allocate resource for EISA slot 2
[  +0,000002] platform eisa.0: Cannot allocate resource for EISA slot 3
[  +0,000001] platform eisa.0: Cannot allocate resource for EISA slot 4
[  +0,000001] platform eisa.0: Cannot allocate resource for EISA slot 5
[  +0,000001] platform eisa.0: Cannot allocate resource for EISA slot 6
[  +0,000001] platform eisa.0: Cannot allocate resource for EISA slot 7
[  +0,000002] platform eisa.0: Cannot allocate resource for EISA slot 8
[  +0,000001] platform eisa.0: EISA: Detected 0 cards
[  +0,001867] ledtrig-cpu: registered to indicate activity on CPUs
[  +0,000005] EFI Variables Facility v0.08 2004-May-17
[  +0,007747] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[  +0,008284] NET: Registered protocol family 10
[  +0,004782] Segment Routing with IPv6
[  +0,000028] NET: Registered protocol family 17
[  +0,000058] Key type dns_resolver registered
[  +0,000673] RAS: Correctable Errors collector initialized.
[  +0,000043] microcode: CPU0: patch_level=0x08108102
[  +0,000012] microcode: CPU1: patch_level=0x08108102
[  +0,000004] microcode: CPU2: patch_level=0x08108102
[  +0,000011] microcode: CPU3: patch_level=0x08108102
[  +0,000009] microcode: CPU4: patch_level=0x08108102
[  +0,000008] microcode: CPU5: patch_level=0x08108102
[  +0,000008] microcode: CPU6: patch_level=0x08108102
[  +0,000007] microcode: CPU7: patch_level=0x08108102
[  +0,000033] microcode: Microcode Update Driver: v2.2.
[  +0,000015] sched_clock: Marking stable (1029999091, 176638433)->(1209429307, -2791783)
[  +0,000198] registered taskstats version 1
[  +0,000010] Loading compiled-in X.509 certificates
[  +0,001911] Loaded X.509 cert 'Build time autogenerated kernel key: c209d4e4513ddb6584e17c46859deb0bc3f91652'
[  +0,000046] zswap: loaded using pool lzo/zbud
[  +0,004555] Key type big_key registered
[  +0,001778] Key type encrypted registered
[  +0,000007] AppArmor: AppArmor sha1 policy hashing enabled
[  +0,000875] integrity: Loading X.509 certificate: UEFI:db
[  +0,001032] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[  +0,000002] integrity: Loading X.509 certificate: UEFI:db
[  +0,000314] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[  +0,000000] integrity: Loading X.509 certificate: UEFI:db
[  +0,000031] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[  +0,000001] integrity: Loading X.509 certificate: UEFI:db
[  +0,000030] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[  +0,000001] integrity: Loading X.509 certificate: UEFI:db
[  +0,000278] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[  +0,001642] ima: No TPM chip found, activating TPM-bypass!
[  +0,000006] ima: Allocated hash algorithm: sha1
[  +0,000007] No architecture policies found
[  +0,000010] evm: Initialising EVM extended attributes:
[  +0,000001] evm: security.selinux
[  +0,000000] evm: security.SMACK64
[  +0,000001] evm: security.SMACK64EXEC
[  +0,000000] evm: security.SMACK64TRANSMUTE
[  +0,000000] evm: security.SMACK64MMAP
[  +0,000001] evm: security.apparmor
[  +0,000000] evm: security.ima
[  +0,000001] evm: security.capability
[  +0,000000] evm: HMAC attrs: 0x1
[  +0,000533] PM:   Magic number: 8:458:542
[  +0,000141] rtc_cmos 00:01: setting system clock to 2020-02-16T17:31:39 UTC (1581874299)
[  +0,000304] acpi_cpufreq: overriding BIOS provided _PSD data
[  +0,002318] Freeing unused decrypted memory: 2040K
[  +0,000506] Freeing unused kernel image memory: 2660K
[  +0,023290] Write protecting the kernel read-only data: 22528k
[  +0,000568] Freeing unused kernel image memory: 2008K
[  +0,000341] Freeing unused kernel image memory: 1476K
[  +0,010999] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[  +0,000005] Run /init as init process
[  +0,058083] hidraw: raw HID events driver (C) Jiri Kosina
[  +0,000225] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[  +0,000296] acpi device:14: registered as cooling_device8
[  +0,000063] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input5
[  +0,005953] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vdd not found, using dummy regulator
[  +0,000017] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vddl not found, using dummy regulator
[  +0,002693] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[  +0,000002] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[  +0,001797] ahci 0000:04:00.0: version 3.0
[  +0,001412] nvme nvme0: pci function 0000:02:00.0
[  +0,004409] cryptd: max_cpu_qlen set to 1000
[  +0,009074] AVX2 version of gcm_enc/dec engaged.
[  +0,000002] AES CTR mode by8 optimization enabled
[  +0,005950] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[  +0,063391] [drm] amdgpu kernel modesetting enabled.
[  +0,000082] Parsing CRAT table with 1 nodes
[  +0,000004] Creating topology SYSFS entries
[  +0,000022] Topology: Add APU node [0x0:0x0]
[  +0,000001] Finished initializing topology
[  +0,000068] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[  +0,000002] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
[  +0,000001] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfe700000 -> 0xfe77ffff
[  +0,000002] checking generic (e0000000 1f0000) vs hw (e0000000 10000000)
[  +0,000001] fb0: switching to amdgpudrmfb from EFI VGA
[  +0,000053] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[  +0,000037] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[  +0,000163] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1043:0x1821 0xC2).
[  +0,000115] [drm] register mmio base: 0xFE700000
[  +0,000001] [drm] register mmio size: 524288
[  +0,000016] [drm] add ip block number 0 <soc15_common>
[  +0,000001] [drm] add ip block number 1 <gmc_v9_0>
[  +0,000001] [drm] add ip block number 2 <vega10_ih>
[  +0,000001] [drm] add ip block number 3 <psp>
[  +0,000001] [drm] add ip block number 4 <gfx_v9_0>
[  +0,000000] [drm] add ip block number 5 <sdma_v4_0>
[  +0,000001] [drm] add ip block number 6 <powerplay>
[  +0,000001] [drm] add ip block number 7 <dm>
[  +0,000001] [drm] add ip block number 8 <vcn_v1_0>
[  +0,000038] ATOM BIOS: 113-PICASSO-114
[  +0,000027] [drm] VCN decode is enabled in VM mode
[  +0,000001] [drm] VCN encode is enabled in VM mode
[  +0,000000] [drm] VCN jpeg decode is enabled in VM mode
[  +0,000045] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[  +0,000014] amdgpu 0000:03:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[  +0,000002] amdgpu 0000:03:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[  +0,000001] amdgpu 0000:03:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[  +0,000006] [drm] Detected VRAM RAM=2048M, BAR=2048M
[  +0,000001] [drm] RAM width 128bits DDR4
[  +0,000046] [TTM] Zone  kernel: Available graphics memory: 3048260 KiB
[  +0,000001] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[  +0,000001] [TTM] Initializing pool allocator
[  +0,000003] [TTM] Initializing DMA pool allocator
[  +0,000075] [drm] amdgpu: 2048M of VRAM memory ready
[  +0,000001] [drm] amdgpu: 3072M of GTT memory ready.
[  +0,000009] [drm] GART: num cpu pages 262144, num gpu pages 262144
[  +0,000792] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[  +0,001850] [drm] use_doorbell being set to: [true]
[  +0,000051] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[  +0,000102] [drm] Found VCN firmware Version: 1.73 Family ID: 18
[  +0,000002] [drm] PSP loading VCN firmware
[  +0,020805] [drm] reserve 0x400000 from 0xf400c00000 for PSP TMR
[  +0,073440] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[  +0,037738] nvme nvme0: 8/0/0 default/read/poll queues
[  +0,001173]  nvme0n1: p1 p2 p3 p4 p5 p6
[  +0,015179] input: ELAN1200:00 04F3:309F Mouse as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input6
[  +0,000105] input: ELAN1200:00 04F3:309F Touchpad as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input7
[  +0,000071] hid-generic 0018:04F3:309F.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:309F] on i2c-ELAN1200:00
[  +0,098433] [drm] DM_PPLIB: values for F clock
[  +0,000001] [drm] DM_PPLIB:    400000 in kHz, 2974 in mV
[  +0,000001] [drm] DM_PPLIB:    933000 in kHz, 3274 in mV
[  +0,000000] [drm] DM_PPLIB:    1067000 in kHz, 3924 in mV
[  +0,000001] [drm] DM_PPLIB:    1200000 in kHz, 4074 in mV
[  +0,000000] [drm] DM_PPLIB: values for DCF clock
[  +0,000001] [drm] DM_PPLIB:    300000 in kHz, 2974 in mV
[  +0,000000] [drm] DM_PPLIB:    600000 in kHz, 3274 in mV
[  +0,000001] [drm] DM_PPLIB:    626000 in kHz, 3924 in mV
[  +0,000000] [drm] DM_PPLIB:    654000 in kHz, 4074 in mV
[  +0,001760] usb 3-1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[  +0,000002] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  +0,000001] usb 3-1: Product: USB2.0-CRW
[  +0,000001] usb 3-1: Manufacturer: Generic
[  +0,000001] usb 3-1: SerialNumber: 20100201396000000
[  +0,001305] [drm] Display Core initialized with v3.2.35!
[  +0,026292] [drm] SADs count is: -2, don't need to read it
[  +0,001359] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  +0,000001] [drm] Driver supports precise vblank timestamp query.
[  +0,003749] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[  +0,001432] kfd kfd: Allocated 3969056 bytes on gart
[  +0,000962] Topology: Add APU node [0x15d8:0x1002]
[  +0,000003] kfd kfd: added device 1002:15d8
[  +0,000665] [drm] fb mappable at 0x1A0000000
[  +0,000001] [drm] vram apper at 0x19F000000
[  +0,000000] [drm] size 8294400
[  +0,000001] [drm] fb depth is 24
[  +0,000000] [drm]    pitch is 7680
[  +0,000061] fbcon: amdgpudrmfb (fb0) is primary device
[  +0,000001] fbcon: Deferring console take-over
[  +0,000002] amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device
[  +0,013800] amdgpu 0000:03:00.0: ring gfx uses VM inv eng 0 on hub 0
[  +0,000003] amdgpu 0000:03:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[  +0,000002] amdgpu 0000:03:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[  +0,000003] amdgpu 0000:03:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[  +0,000002] amdgpu 0000:03:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[  +0,000002] amdgpu 0000:03:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[  +0,000002] amdgpu 0000:03:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[  +0,000002] amdgpu 0000:03:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[  +0,000002] amdgpu 0000:03:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[  +0,000002] amdgpu 0000:03:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[  +0,000002] amdgpu 0000:03:00.0: ring sdma0 uses VM inv eng 0 on hub 1
[  +0,000002] amdgpu 0000:03:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
[  +0,000002] amdgpu 0000:03:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
[  +0,000002] amdgpu 0000:03:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
[  +0,000002] amdgpu 0000:03:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[  +0,013881] usbcore: registered new interface driver rtsx_usb
[  +0,006665] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:03:00.0 on minor 0
[  +0,115747] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[  +0,150670] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37
[  +0,000002] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  +0,000002] usb 3-2: Product: USB2.0 Hub
[  +0,043620] hub 3-2:1.0: USB hub found
[  +0,000522] hub 3-2:1.0: 4 ports detected
[  +0,117185] tsc: Refined TSC clocksource calibration: 2096.053 MHz
[  +0,000020] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e369fd61e0, max_idle_ns: 440795252296 ns
[  +0,000043] clocksource: Switched to clocksource tsc
[  +0,171915] usb 3-2.1: new full-speed USB device number 4 using xhci_hcd
[  +0,006278] ahci 0000:04:00.0: failed stop FIS RX (-16)
[  +0,000021] ahci 0000:04:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[  +0,000004] ahci 0000:04:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[  +0,000469] scsi host0: ahci
[  +0,000152] ata1: SATA max UDMA/133 abar m2048@0xfe800000 port 0xfe800100 irq 49
[  +0,103955] usb 3-2.1: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[  +0,000004] usb 3-2.1: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[  +0,000007] usb 3-2.1: New USB device found, idVendor=13d3, idProduct=3491, bcdDevice= 0.01
[  +0,000003] usb 3-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  +0,128733] usb 3-2.2: new high-speed USB device number 5 using xhci_hcd
[  +0,085396] ata1: SATA link down (SStatus 0 SControl 300)
[  +0,039659] usb 3-2.2: New USB device found, idVendor=13d3, idProduct=56dd, bcdDevice=18.52
[  +0,000003] usb 3-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[  +0,000002] usb 3-2.2: Product: USB2.0 HD UVC WebCam
[  +0,000002] usb 3-2.2: Manufacturer: Azurewave
[  +0,000001] usb 3-2.2: SerialNumber: 0x0001
[ +14,155198] NET: Registered protocol family 38
[  +1,485520] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[  +0,152889] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[  +0,017484] systemd[1]: Detected architecture x86-64.
[  +0,003083] systemd[1]: Set hostname to <yet-VivoBook-X512DA-F512DA>.
[  +0,084476] systemd[1]: Reached target User and Group Name Lookups.
[  +0,000240] systemd[1]: Created slice User and Session Slice.
[  +0,000045] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  +0,000309] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  +0,000013] systemd[1]: Reached target Remote File Systems.
[  +0,000129] systemd[1]: Created slice System Slice.
[  +0,000066] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  +0,014781] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[  +0,001303] lp: driver loaded but no devices found
[  +0,004338] ppdev: user-space parallel port driver
[  +0,065385] systemd-journald[519]: Received request to flush runtime journal from PID 1
[  +0,006325] systemd-journald[519]: File /var/log/journal/f7e7b993f1104c89a0f9ed9196adff44/system.journal corrupted or uncleanly shut down, renaming and replacing.
[  +0,011309] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[  +0,096747] snd_pci_acp3x 0000:03:00.5: enabling device (0000 -> 0002)
[  +0,000217] snd_pci_acp3x 0000:03:00.5: Invalid ACP audio mode : 2
[  +0,005607] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  +0,000249] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  +0,000779] mc: Linux media interface: v0.10
[  +0,008695] videodev: Linux video capture interface: v2.00
[  +0,004561] asus_wmi: ASUS WMI generic driver loaded
[  +0,005325] asus_wmi: Initialization: 0x1
[  +0,000071] asus_wmi: BIOS WMI version: 9.0
[  +0,000051] asus_wmi: SFUN value: 0x21
[  +0,000005] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[  +0,000002] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[  +0,002064] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input8
[  +0,010669] kvm: Nested Virtualization enabled
[  +0,000034] kvm: Nested Paging enabled
[  +0,000001] SVM: Virtual VMLOAD VMSAVE supported
[  +0,000000] SVM: Virtual GIF supported
[  +0,037504] Bluetooth: Core ver 2.22
[  +0,000030] NET: Registered protocol family 31
[  +0,000001] Bluetooth: HCI device and connection manager initialized
[  +0,000006] Bluetooth: HCI socket layer initialized
[  +0,000004] Bluetooth: L2CAP socket layer initialized
[  +0,000004] Bluetooth: SCO socket layer initialized
[  +0,001552] MCE: In-kernel MCE decoding enabled.
[  +0,003383] EDAC amd64: Node 0: DRAM ECC disabled.
[  +0,000002] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
               (Note that use of the override may cause unknown side effects.)
[  +0,004320] usbcore: registered new interface driver btusb
[  +0,004901] uvcvideo: Found UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56dd)
[  +0,003900] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[  +0,000010] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[  +0,002548] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  +0,001780] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[  +0,001124] uvcvideo: Failed to initialize entity for entity 6
[  +0,000001] uvcvideo: Failed to register entities (-22).
[  +0,000070] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-2/3-2.2/3-2.2:1.0/input/input9
[  +0,001611] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[  +0,000136] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[  +0,000168] snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002)
[  +0,050689] usbcore: registered new interface driver uvcvideo
[  +0,000002] USB Video Class driver (1.1.1)
[  +0,000026] asus_wmi: Number of fans: 0
[  +0,016403] input: ELAN1200:00 04F3:309F Touchpad as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input11
[  +0,000135] hid-multitouch 0018:04F3:309F.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:309F] on i2c-ELAN1200:00
[  +0,003729] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[  +0,001071] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[  +0,006773] EDAC amd64: Node 0: DRAM ECC disabled.
[  +0,000008] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
               (Note that use of the override may cause unknown side effects.)
[  +0,000807] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input12
[  +0,005669] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[  +0,000003] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  +0,000002] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[  +0,000001] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[  +0,000001] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[  +0,000001] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
[  +0,000001] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[  +0,084087] audit: type=1400 audit(1581874317.342:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=787 comm="apparmor_parser"
[  +0,000121] audit: type=1400 audit(1581874317.342:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=789 comm="apparmor_parser"
[  +0,000556] audit: type=1400 audit(1581874317.346:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=786 comm="apparmor_parser"
[  +0,000643] audit: type=1400 audit(1581874317.346:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=785 comm="apparmor_parser"
[  +0,000003] audit: type=1400 audit(1581874317.346:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=785 comm="apparmor_parser"
[  +0,000003] audit: type=1400 audit(1581874317.346:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=785 comm="apparmor_parser"
[  +0,000034] audit: type=1400 audit(1581874317.346:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=790 comm="apparmor_parser"
[  +0,000003] audit: type=1400 audit(1581874317.346:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=790 comm="apparmor_parser"
[  +0,001629] audit: type=1400 audit(1581874317.346:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=794 comm="apparmor_parser"
[  +0,000332] audit: type=1400 audit(1581874317.346:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=792 comm="apparmor_parser"
[  +0,002806] EDAC amd64: Node 0: DRAM ECC disabled.
[  +0,000002] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
               (Note that use of the override may cause unknown side effects.)
[  +0,000152] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input13
[  +0,103081] EDAC amd64: Node 0: DRAM ECC disabled.
[  +0,000003] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
               (Note that use of the override may cause unknown side effects.)
[  +0,006240] ath10k_pci 0000:01:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1a3b:2231
[  +0,000003] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[  +0,000591] ath10k_pci 0000:01:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[  +0,008125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  +0,000003] Bluetooth: BNEP filters: protocol multicast
[  +0,000006] Bluetooth: BNEP socket layer initialized
[  +0,057649] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[  +0,007606] EDAC amd64: Node 0: DRAM ECC disabled.
[  +0,000003] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
               (Note that use of the override may cause unknown side effects.)
[  +0,067392] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[  +0,024051] EDAC amd64: Node 0: DRAM ECC disabled.
[  +0,000002] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
               (Note that use of the override may cause unknown side effects.)
[  +0,077368] fbcon: Taking over console
[  +0,006705] EDAC amd64: Node 0: DRAM ECC disabled.
[  +0,000002] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
               (Note that use of the override may cause unknown side effects.)
[  +0,011499] ath10k_pci 0000:01:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[  +0,000374] Console: switching to colour frame buffer device 240x67
[  +0,040419] EDAC amd64: Node 0: DRAM ECC disabled.
[  +0,000003] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
               (Note that use of the override may cause unknown side effects.)
[  +0,039616] ath: EEPROM regdomain: 0x6a
[  +0,000002] ath: EEPROM indicates we should expect a direct regpair map
[  +0,000002] ath: Country alpha2 being used: 00
[  +0,000000] ath: Regpair used: 0x6a
[  +0,004877] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
[  +0,262414] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
[févr.16 18:32] Bluetooth: RFCOMM TTY layer initialized
[  +0,000008] Bluetooth: RFCOMM socket layer initialized
[  +0,000009] Bluetooth: RFCOMM ver 1.11
[  +0,957806] wlp1s0: authenticate with f4:ca:e5:eb:d3:d0
[  +0,038117] wlp1s0: send auth to f4:ca:e5:eb:d3:d0 (try 1/3)
[  +0,002549] wlp1s0: authenticated
[  +0,002772] wlp1s0: associate with f4:ca:e5:eb:d3:d0 (try 1/3)
[  +0,003912] wlp1s0: RX AssocResp from f4:ca:e5:eb:d3:d0 (capab=0x411 status=0 aid=2)
[  +0,002760] wlp1s0: associated
[  +0,029559] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[févr.16 19:43] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
(END)

Hors ligne

#11 Le 16/02/2020, à 23:35

xubu1957

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonsoir,

Montre, en te servant du Retour utilisable de commande :

lspci -vnnk | grep -Ei -A12 "vga|3d|display" | grep -Ei "vga|3d|display|in use"

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#12 Le 17/02/2020, à 00:01

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

et voilà

yet@yet-VivoBook-X512DA-F512DA:~$ lspci -vnnk | grep -Ei -A12 "vga|3d|display" | grep -Ei "vga|3d|display|in use"
03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Picasso [1002:15d8] (rev c2) (prog-if 00 [VGA controller])
	Kernel driver in use: amdgpu
yet@yet-VivoBook-X512DA-F512DA:~$ 

Hors ligne

#13 Le 17/02/2020, à 02:07

Coeur Noir

Re : [Résolu] 2eme écran (HDMI)... tout rose!

À priori aucun problème dans ton dmesg, même pas un petit message d'erreur sur ACPI… ce qui signifierait qu'il n'y a aucun problème ( de reconnaissance ) matériel(le). C'est bien. Et ça te fait une belle jambe, lol.

Un problème logiciel, de pilote ? Cette version d'amdgpu prend-elle bien complètement en charge cette carte graphique ? C'est au-delà de mes connaissances mais j'ai l'intuition que c'est la piste à creuser… et ça peut être délicat.

Encore une fois as-tu essayé Ubuntu en 20.04, qui aura des pilotes plus récents à priori ?


DébuterDocBien rédigerRetour commandeInsérer image | mes albums <>

Hors ligne

#14 Le 17/02/2020, à 08:37

xubu1957

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,

C'est pas clair dans > Why AMdGPU get Pink Screen ?? ! Why ?!!

_ _ _

Pour suivre l'idée de Coeur Noir :

inbox a écrit :

Salut,

Comme il semble s'agir d'un modèle de carte graphique récent, essaye la version 20.04 en 64 bits. Cette image contient, entre autres, un noyau 5.5.

A+

dans > [RESOLU] Changement de carte graphique = résolution bloquée

Dernière modification par xubu1957 (Le 17/02/2020, à 09:01)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#15 Le 20/02/2020, à 20:15

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

La version 20.04 existe déja? Moi, je suis sous Xubuntu. ça ne pose pas de problème?

Hors ligne

#16 Le 20/02/2020, à 20:52

xubu1957

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,

Elle est en phase de tests, tu l'essaye en session live.

Le calendrier > wiki.ubuntu.com/FocalFossa/ReleaseSchedule


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#17 Le 14/03/2020, à 20:44

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,
@xubu1957. Il semble en effet que la version 20.04 apporte la solution à mon problème. Je n'ai toujours pas eu l'écran rose après une heure alors que quelques minutes on suffit quand je suis revenu sous la 18.04
Bon, si je comprends bien je vais devoir attendre quelques mois. Pour Xubuntu, ça sort plus tard je crois.

Sinon, j'ai remarqué une meilleure fluidité du pavé tactile sous 20.04

Hors ligne

#18 Le 14/03/2020, à 20:53

xubu1957

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,

Dans le fond de la boutique > cdimage.ubuntu.com/xubuntu/daily-live/current/HEADER.html


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#19 Le 14/03/2020, à 20:55

nany

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,



Yetuntu a écrit :

Bon, si je comprends bien je vais devoir attendre quelques mois. Pour Xubuntu, ça sort plus tard je crois.

Xubuntu 20.04 daily.


Le mot de passe sudo ne s'affiche pas
Comment bien utiliser les balises BBcode
LIBRARIES ARE NOT BOOK-STORES! − Une souris, des souris. Un souci, des soucis. Une énigme résolue, un problème résolu.
J’ai forké le compteur-couche-tard.

En ligne

#20 Le 15/03/2020, à 20:31

Yetuntu

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Génial, merci à tous!

Hors ligne

#21 Le 15/03/2020, à 22:52

Coeur Noir

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bon, attends-toi à des pépins passagers quand même, c'est une version en cours de tests… qui ne sera véritablement tranquille qu'à partir de la 20.04.1 ( juillet à priori ) où les inévitables bugs de jeunesse auront été corrigés.


DébuterDocBien rédigerRetour commandeInsérer image | mes albums <>

Hors ligne

#22 Le 16/03/2020, à 08:13

LukePerp

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Pour notre information, quelles sont les causes du défaut ?


Desktop : Ubuntu Mate LTS - Intel i5 - 8 Go - Dual boot Windows 7 hors ligne pour jouer
Laptop : Ubuntu Mate LTS - Intel i5 - 4 Go
Mises à jour silencieuses : Script

Hors ligne

#23 Le 16/03/2020, à 10:05

FrancisFDZ

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,

[HS]

xubu1957 a écrit :

Bonjour,

Dans le fond de la boutique > cdimage.ubuntu.com/xubuntu/daily-live/current/HEADER.html

Bien que peu doué en langues étrangères, il me semble bien que "le fond de la boutique" est la traduction en français de "ras el hanout". De quoi pimenter la discussion !  :lol
[/HS]


-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]

Hors ligne

#24 Le 16/03/2020, à 10:48

xubu1957

Re : [Résolu] 2eme écran (HDMI)... tout rose!

Bonjour,

[HS]   

@FrancisFDZ

Au lieu du Ras_el-hanout, je propose Nos bureaux sous Xfce.

wink

[/HS]


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#25 Le 16/03/2020, à 12:32

Coeur Noir

Re : [Résolu] 2eme écran (HDMI)... tout rose!

LukePerp a écrit :

Pour notre information, quelles sont les causes du défaut ?

À priori il utilise une carte graphique AMD récente, mieux prise en charge dans la 20.04.

( ce qui signifie qu'elle finira aussi par être prise en charge sous 18.04 via le HWE, d'ici quelques mois ).


DébuterDocBien rédigerRetour commandeInsérer image | mes albums <>

Hors ligne