Contenu | Rechercher | Menus

Annonce

DVD, clés USB et t-shirts Ubuntu-fr disponibles sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 24/10/2021, à 11:24

xubu1957

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,

> quel-canal-wi-fi-choisir-pour-optimiser-son-debit

> les-dix-ennemis-des-reseaux-wi-fi-

> tomsguide.fr/2018/07/02/wi-fi-comment-ameliorer-la-qualite-de-sa-connexion

Extraits a écrit :

Disposer la box un peu en hauteur
Si vous avez un peu de place à la maison, évitez de cacher la box ou le routeur Wi-Fi tout en bas, derrière le meuble du téléviseur. Surtout, ne la placez pas à même le sol : ce serait une mauvaise idée. Ne la collez pas non plus contre un mur, surtout si l’appareil en question ne dispose d’aucune antenne externe. Placez plutôt la box en hauteur. Il n’est peut-être pas utile de la disposer tout en haut de l’armoire : l’idéal est de mettre la box à environ 1 mètre du sol, sur un petit meuble par exemple. En outre, ne la placez pas « dans » le meuble, mais à l’extérieur. Évitez également de « coller » d’autres appareils électriques tout autour de la box ou du routeur. Enfin, éloignez la box d’éléments métalliques, qui empêchent la propagation des ondes.

Mettre la box au centre du domicile
En théorie, la portée maximale du Wi-Fi G est de 100 mètres. En pratique, la plupart des box ADSL ne dépassent guère les 15 mètres en intérieur, dans le meilleur des cas. Même chose pour le Wi-Fi N ou le Wi-Fi AC : sa portée est en théorie de 250 mètres, mais là encore, difficile de dépasser les 20 mètres en intérieur. L’intérêt d’une box est de pouvoir diffuser les ondes Wi-Fi dans tout l’appartement ou la maison, aussi bien à l’horizontale qu’à la verticale. Par conséquent, pour qu’elle soit réellement efficace, placez si possible l’appareil au centre de votre domicile, afin de couvrir un maximum de surface.

_ _ _

Remarque : le branchement sur une multiprise ou une rallonge est déconseillé, car il peut altérer le fonctionnement de votre Livebox.

> assistance.orange.fr/livebox-modem/toutes-les-livebox-et-modems

Dernière modification par xubu1957 (Le 24/10/2021, à 11:27)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 20.04 LTS - Lenovo T410 -18.04.1 LTS Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#27 Le 24/10/2021, à 11:55

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Merci pour les infos, je vais regarder ça, possible en effet que ça joue chez nous.
Par contre dernièrement on était dans un gite avec un wifi très stable et accessible et j'ai eu les mêmes soucis de déconnexion régulière (par contre mon conjoint sur ses appareils non).

Hors ligne

#28 Le 24/10/2021, à 12:28

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

re,
il y a eu une déconnexion assez rapide, je pense que j'ai réussi à faire tourner la ligne de code quand c'était déconnecté :

sophie@sophie-Aspire-A315-54K:~$ dmesg | tail -40
[ 5080.724235] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5080.756001] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5080.757413] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5080.758723] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5080.760100] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5085.425687] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5085.477214] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5085.478972] wlp2s0: authenticated
[ 5085.480702] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5085.484997] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5085.487087] wlp2s0: associated
[ 5085.487187] ath: EEPROM regdomain: 0x80fa
[ 5085.487189] ath: EEPROM indicates we should expect a country code
[ 5085.487190] ath: doing EEPROM country->regdmn map search
[ 5085.487190] ath: country maps to regdmn code: 0x37
[ 5085.487191] ath: Country alpha2 being used: FR
[ 5085.487192] ath: Regpair used: 0x37
[ 5085.487193] ath: regdomain 0x80fa dynamically updated by country element
[ 5085.493014] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 5161.005501] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5161.037307] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5161.038722] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5161.040044] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5161.041650] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5165.758264] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5165.813017] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5165.818005] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 5165.822969] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 5165.842595] wlp2s0: authenticated
[ 5165.843310] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5165.859286] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 2/3)
[ 5165.897011] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5165.900147] wlp2s0: associated
[ 5165.900441] ath: EEPROM regdomain: 0x80fa
[ 5165.900447] ath: EEPROM indicates we should expect a country code
[ 5165.900450] ath: doing EEPROM country->regdmn map search
[ 5165.900453] ath: country maps to regdmn code: 0x37
[ 5165.900456] ath: Country alpha2 being used: FR
[ 5165.900460] ath: Regpair used: 0x37
[ 5165.900463] ath: regdomain 0x80fa dynamically updated by country element
sophie@sophie-Aspire-A315-54K:~$

Hors ligne

#29 Le 24/10/2021, à 13:17

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

là ça a planté pendant bien 5 minutes donc j'ai refait tourner au cas où (apparemment il y a un peu plus de choses au début de la sortie) :

sophie@sophie-Aspire-A315-54K:~$ dmesg | tail -40
[ 7280.440372] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440375] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440384] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440388] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440397] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440400] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440410] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.480148] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 7285.372280] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 7285.406495] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 7285.411384] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 7285.416122] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 7285.420850] wlp2s0: authentication with a4:3e:51:bd:9a:a6 timed out
[ 7285.702224] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7285.733819] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7285.735341] wlp2s0: authenticated
[ 7285.739823] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 7285.743571] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 2/3)
[ 7285.747400] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 3/3)
[ 7285.751017] wlp2s0: association with a4:3e:51:bd:9a:ab timed out
[ 7290.401424] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 7290.436120] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 7290.437816] wlp2s0: authenticated
[ 7290.442079] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 7290.446430] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 7290.449089] wlp2s0: associated
[ 7290.449646] ath: EEPROM regdomain: 0x80fa
[ 7290.449653] ath: EEPROM indicates we should expect a country code
[ 7290.449656] ath: doing EEPROM country->regdmn map search
[ 7290.449668] ath: country maps to regdmn code: 0x37
[ 7290.449671] ath: Country alpha2 being used: FR
[ 7290.449674] ath: Regpair used: 0x37
[ 7290.449677] ath: regdomain 0x80fa dynamically updated by country element
[ 7290.459589] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 7290.462049] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 7779.374660] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7779.406477] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7779.407808] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 7779.409108] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 7779.410417] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
sophie@sophie-Aspire-A315-54K:~$ 

Hors ligne

#30 Le 24/10/2021, à 13:28

xubu1957

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Vu :

[ 7280.440372] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440375] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440384] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440388] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440397] pcieport 0000:00:1c.5: AER: can't find device of ID00e5
[ 7280.440400] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440410] pcieport 0000:00:1c.5: AER: can't find device of ID00e5

et > Erreur PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e, montre aussi :

lspci

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 20.04 LTS - Lenovo T410 -18.04.1 LTS Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#31 Le 24/10/2021, à 13:50

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

voilà (actuellement c'est connecté)

sophie@sophie-Aspire-A315-54K:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point LPC Controller/eSPI Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
03:00.0 Non-Volatile memory controller: Sandisk Corp WD Black 2018/PC SN520 NVMe SSD (rev 01)
sophie@sophie-Aspire-A315-54K:~$ 

Hors ligne

#32 Le 24/10/2021, à 14:21

NicoApi73

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Il faut la commande lshw pour savoir quel est le périphérique qui génère des erreurs AER :

sudo lshw

l'ath10k génére quelques erreurs AER sur certaines machines. Je ne pense pas que ce soit bien grave. Pour moi, le problème ne vient peut être pas de la machine, mais de la liaison avec la box. As tu la possibilité d'utiliser une autre box pour faire l'essai, ou un téléphone configuré en point d'accès WiFi?

Hors ligne

#33 Le 24/10/2021, à 14:33

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

je dois faire tourner cette commande n'importe quand ou seulement quand c'est planté ?

sinon j'ai eu l'occasion de tester récemment dans un gîte qui avait une bonne wifi et ça se déconnectait aussi de temps en temps. Si absolument nécessaire je testerai avec le wifi de mon téléphone mais il est vraiment puissant et ça me file une migraine pas possible au bout d'un moment, or comme c'est aléatoire pour tester je serai obligée de le laisser branché un bon moment.

Hors ligne

#34 Le 24/10/2021, à 14:36

nany

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,


NicoApi73 a écrit :
sudo lshw
sudo lshw -sanitize

Maître Capello

Hors ligne

#35 Le 24/10/2021, à 15:07

NicoApi73

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

marie_p19 a écrit :

je dois faire tourner cette commande n'importe quand ou seulement quand c'est planté ?

N'importe quand, ça liste le matériel de ta machine.

Tu es connecté en 5GHz, tu as aussi le 2.4GHz, tu peux essayer sur cette fréquence, pour voir si ça change quelque chose.

Hors ligne

#36 Le 24/10/2021, à 15:51

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

ok voilà la sortie

sophie@sophie-Aspire-A315-54K:~$     sudo lshw
[sudo] Mot de passe de sophie : 
sophie-aspire-a315-54k      
    description: Ordinateur Bloc-notes
    produit: Aspire A315-54K (0000000000000000)
    fabricant: Acer
    version: V1.09
    numéro de série: NXHEEEF02P023099C33400
    bits: 64 bits
    fonctionnalités: smbios-3.0.0 dmi-3.0.0 smp vsyscall32
    configuration : chassis=notebook family=Aspire 3 sku=0000000000000000 uuid=65E4587A-9FDF-11EA-80D6-089798A1EA5A
  *-core
       description: Carte mère
       produit: Sleepy_KL
       fabricant: KBL
       identifiant matériel: 0
       version: V1.09
       numéro de série: NBHR811001023217133400
       emplacement: Type2 - Board Chassis Location
     *-firmware
          description: BIOS
          fabricant: Insyde Corp.
          identifiant matériel: 0
          version: V1.09
          date: 04/01/2020
          taille: 128KiB
          capacité: 8MiB
          fonctionnalités: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification uefi
     *-cpu
          description: CPU
          produit: Intel(R) Core(TM) i3-8130U CPU @ 2.20GHz
          fabricant: Intel Corp.
          identifiant matériel: 4
          information bus: cpu@0
          version: Intel(R) Core(TM) i3-8130U CPU @ 2.20GHz
          numéro de série: To Be Filled By O.E.M.
          emplacement: U3E1
          taille: 1840MHz
          capacité: 4005MHz
          bits: 64 bits
          horloge: 100MHz
          fonctionnalités: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d cpufreq
          configuration : cores=2 enabledcores=2 threads=4
        *-cache:0
             description: L1 cache
             identifiant matériel: 5
             emplacement: L1 Cache
             taille: 128KiB
             capacité: 128KiB
             fonctionnalités: synchronous internal write-back unified
             configuration : level=1
        *-cache:1
             description: L2 cache
             identifiant matériel: 6
             emplacement: L2 Cache
             taille: 512KiB
             capacité: 512KiB
             fonctionnalités: synchronous internal write-back unified
             configuration : level=2
        *-cache:2
             description: L3 cache
             identifiant matériel: 7
             emplacement: L3 Cache
             taille: 4MiB
             capacité: 4MiB
             fonctionnalités: synchronous internal write-back unified
             configuration : level=3
     *-memory
          description: Mémoire Système
          identifiant matériel: e
          emplacement: Carte mère
          taille: 4GiB
        *-bank:0
             description: SODIMM DDR4 Synchrone Unbuffered (Unregistered) 2400 MHz (0,4 ns)
             produit: 4ATF51264HZ-2G6E1
             fabricant: Micron
             identifiant matériel: 0
             numéro de série: 00000000
             emplacement: ChannelA-DIMM0
             taille: 4GiB
             bits: 64 bits
             horloge: 2400MHz (0.4ns)
        *-bank:1
             description: Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2021-01-19 19:00+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006)Project-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2021-01-19 19:00+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) [vide]
             identifiant matériel: 1
             emplacement: ChannelB-DIMM0
     *-pci
          description: Host bridge
          produit: Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
          fabricant: Intel Corporation
          identifiant matériel: 100
          information bus: pci@0000:00:00.0
          version: 08
          bits: 32 bits
          horloge: 33MHz
          configuration : driver=skl_uncore
          ressources : irq:0
        *-display
             description: VGA compatible controller
             produit: UHD Graphics 620
             fabricant: Intel Corporation
             identifiant matériel: 2
             information bus: pci@0000:00:02.0
             version: 07
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration : driver=i915 latency=0
             ressources : irq:136 mémoire:b0000000-b0ffffff mémoire:a0000000-afffffff portE/S:4000(taille=64) mémoire:c0000-dffff
        *-usb
             description: USB controller
             produit: Sunrise Point-LP USB 3.0 xHCI Controller
             fabricant: Intel Corporation
             identifiant matériel: 14
             information bus: pci@0000:00:14.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi xhci cap_list
             configuration : driver=xhci_hcd latency=0
             ressources : irq:125 mémoire:b1410000-b141ffff
           *-usbhost:0
                produit: xHCI Host Controller
                fabricant: Linux 5.11.0-38-generic xhci-hcd
                identifiant matériel: 0
                information bus: usb@1
                nom logique: usb1
                version: 5.11
                fonctionnalités: usb-2.00
                configuration : driver=hub slots=12 speed=480Mbit/s
              *-usb:0
                   description: Interface sans fil Bluetooth
                   produit: Qualcomm Atheros QCA9377 Bluetooth
                   fabricant: Lite-On Technology Corp.
                   identifiant matériel: 5
                   information bus: usb@1:5
                   version: 0.01
                   fonctionnalités: bluetooth usb-2.01
                   configuration : driver=btusb maxpower=100mA speed=12Mbit/s
              *-usb:1
                   description: Vidéo
                   produit: VGA WebCam
                   fabricant: Quanta
                   identifiant matériel: 7
                   information bus: usb@1:7
                   version: 0.06
                   numéro de série: 0x0001
                   fonctionnalités: usb-2.00
                   configuration : driver=uvcvideo maxpower=500mA speed=480Mbit/s
           *-usbhost:1
                produit: xHCI Host Controller
                fabricant: Linux 5.11.0-38-generic xhci-hcd
                identifiant matériel: 1
                information bus: usb@2
                nom logique: usb2
                version: 5.11
                fonctionnalités: usb-3.00
                configuration : driver=hub slots=6 speed=5000Mbit/s
        *-generic:0
             description: Signal processing controller
             produit: Sunrise Point-LP Serial IO I2C Controller #0
             fabricant: Intel Corporation
             identifiant matériel: 15
             information bus: pci@0000:00:15.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration : driver=intel-lpss latency=0
             ressources : irq:16 mémoire:b142a000-b142afff
        *-generic:1
             description: Signal processing controller
             produit: Sunrise Point-LP Serial IO I2C Controller #1
             fabricant: Intel Corporation
             identifiant matériel: 15.1
             information bus: pci@0000:00:15.1
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm bus_master cap_list
             configuration : driver=intel-lpss latency=0
             ressources : irq:17 mémoire:b142b000-b142bfff
        *-communication
             description: Communication controller
             produit: Sunrise Point-LP CSME HECI #1
             fabricant: Intel Corporation
             identifiant matériel: 16
             information bus: pci@0000:00:16.0
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration : driver=mei_me latency=0
             ressources : irq:129 mémoire:b142c000-b142cfff
        *-sata
             description: SATA controller
             produit: Sunrise Point-LP SATA Controller [AHCI mode]
             fabricant: Intel Corporation
             identifiant matériel: 17
             information bus: pci@0000:00:17.0
             version: 21
             bits: 32 bits
             horloge: 66MHz
             fonctionnalités: sata msi pm ahci_1.0 bus_master cap_list
             configuration : driver=ahci latency=0
             ressources : irq:126 mémoire:b1428000-b1429fff mémoire:b142f000-b142f0ff portE/S:4080(taille=8) portE/S:4088(taille=4) portE/S:4060(taille=32) mémoire:b142d000-b142d7ff
        *-pci:0
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #5
             fabricant: Intel Corporation
             identifiant matériel: 1c
             information bus: pci@0000:00:1c.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:122 portE/S:3000(taille=4096) mémoire:b1300000-b13fffff
           *-network
                description: Ethernet interface
                produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                fabricant: Realtek Semiconductor Co., Ltd.
                identifiant matériel: 0
                information bus: pci@0000:01:00.0
                nom logique: enp1s0
                version: 15
                numéro de série: 08:97:98:a1:ea:5a
                capacité: 1Gbit/s
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                configuration : autonegotiation=on broadcast=yes driver=r8169 driverversion=5.11.0-38-generic firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=twisted pair
                ressources : irq:16 portE/S:3000(taille=256) mémoire:b1304000-b1304fff mémoire:b1300000-b1303fff
        *-pci:1
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #6
             fabricant: Intel Corporation
             identifiant matériel: 1c.5
             information bus: pci@0000:00:1c.5
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:123 mémoire:b1000000-b11fffff
           *-network
                description: Interface réseau sans fil
                produit: QCA9377 802.11ac Wireless Network Adapter
                fabricant: Qualcomm Atheros
                identifiant matériel: 0
                information bus: pci@0000:02:00.0
                nom logique: wlp2s0
                version: 31
                numéro de série: 80:30:49:12:83:df
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration : broadcast=yes driver=ath10k_pci driverversion=5.11.0-38-generic firmware=WLAN.TF.2.1-00021-QCARMSWP-1 ip=192.168.1.20 latency=0 link=yes multicast=yes wireless=IEEE 802.11
                ressources : irq:135 mémoire:b1000000-b11fffff
        *-pci:2
             description: PCI bridge
             produit: Sunrise Point-LP PCI Express Root Port #9
             fabricant: Intel Corporation
             identifiant matériel: 1d
             information bus: pci@0000:00:1d.0
             version: f1
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration : driver=pcieport
             ressources : irq:124 mémoire:b1200000-b12fffff
           *-storage
                description: Non-Volatile memory controller
                produit: WD Black 2018/PC SN520 NVMe SSD
                fabricant: Sandisk Corp
                identifiant matériel: 0
                information bus: pci@0000:03:00.0
                version: 01
                bits: 64 bits
                horloge: 33MHz
                fonctionnalités: storage pm msi msix pciexpress nvm_express bus_master cap_list
                configuration : driver=nvme latency=0
                ressources : irq:16 mémoire:b1200000-b1203fff
              *-nvme0
                   description: NVMe device
                   produit: WDC PC SN520 SDAPNUW-256G-1014
                   identifiant matériel: 0
                   nom logique: /dev/nvme0
                   version: 20110000
                   numéro de série: 2011A2804834
                   configuration : nqn=nqn.2018-01.com.wdc:nguid:E8238FA6BF53-0001-001B448B46C32CC5 state=live
                 *-namespace
                      description: NVMe namespace
                      identifiant matériel: 1
                      nom logique: /dev/nvme0n1
                      taille: 238GiB (256GB)
                      fonctionnalités: gpt-1.00 partitioned partitioned:gpt
                      configuration : guid=07a1b033-0d46-49e3-80de-e3e213498541 logicalsectorsize=512 sectorsize=512
                    *-volume:0
                         description: Windows FAT volume
                         fabricant: MSDOS5.0
                         identifiant matériel: 1
                         nom logique: /dev/nvme0n1p1
                         nom logique: /boot/efi
                         version: FAT32
                         numéro de série: f607-ad66
                         taille: 95MiB
                         capacité: 99MiB
                         fonctionnalités: boot fat initialized
                         configuration : FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro name=EFI system partition state=mounted
                    *-volume:1
                         description: reserved partition
                         fabricant: Windows
                         identifiant matériel: 2
                         nom logique: /dev/nvme0n1p2
                         numéro de série: 95e977fd-018c-4da7-979d-3dc0be14b51c
                         capacité: 15MiB
                         fonctionnalités: nofs
                         configuration : name=Microsoft reserved partition
                    *-volume:2
                         description: Windows NTFS volume
                         fabricant: Windows
                         identifiant matériel: 3
                         nom logique: /dev/nvme0n1p3
                         version: 3.1
                         numéro de série: 543e43a3-c4f5-d943-9393-587a58c4df9a
                         taille: 123GiB
                         capacité: 123GiB
                         fonctionnalités: ntfs initialized
                         configuration : clustersize=4096 created=2020-10-06 11:42:40 filesystem=ntfs name=Basic data partition state=clean
                    *-volume:3
                         description: Windows NTFS volume
                         fabricant: Windows
                         identifiant matériel: 4
                         nom logique: /dev/nvme0n1p4
                         version: 3.1
                         numéro de série: 961e-1a5c
                         taille: 488MiB
                         capacité: 518MiB
                         fonctionnalités: boot precious ntfs initialized
                         configuration : clustersize=4096 created=2020-10-06 10:46:01 filesystem=ntfs state=clean
                    *-volume:4
                         description: Volume EXT4
                         fabricant: Linux
                         identifiant matériel: 5
                         nom logique: /dev/nvme0n1p5
                         nom logique: /
                         version: 1.0
                         numéro de série: 8eeae8aa-6d16-4413-b005-6f1c07bc8be4
                         taille: 114GiB
                         fonctionnalités: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                         configuration : created=2020-10-06 11:16:52 filesystem=ext4 lastmountpoint=/ modified=2021-10-24 11:44:17 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro mounted=2021-10-24 11:44:17 state=mounted
        *-isa
             description: ISA bridge
             produit: Sunrise Point LPC Controller/eSPI Controller
             fabricant: Intel Corporation
             identifiant matériel: 1f
             information bus: pci@0000:00:1f.0
             version: 21
             bits: 32 bits
             horloge: 33MHz
             fonctionnalités: isa bus_master
             configuration : latency=0
        *-memory NON-RÉCLAMÉ
             description: Memory controller
             produit: Sunrise Point-LP PMC
             fabricant: Intel Corporation
             identifiant matériel: 1f.2
             information bus: pci@0000:00:1f.2
             version: 21
             bits: 32 bits
             horloge: 33MHz (30.3ns)
             fonctionnalités: bus_master
             configuration : latency=0
             ressources : mémoire:b1424000-b1427fff
        *-multimedia
             description: Audio device
             produit: Sunrise Point-LP HD Audio
             fabricant: Intel Corporation
             identifiant matériel: 1f.3
             information bus: pci@0000:00:1f.3
             version: 21
             bits: 64 bits
             horloge: 33MHz
             fonctionnalités: pm msi bus_master cap_list
             configuration : driver=snd_hda_intel latency=32
             ressources : irq:131 mémoire:b1420000-b1423fff mémoire:b1400000-b140ffff
        *-serial
             description: SMBus
             produit: Sunrise Point-LP SMBus
             fabricant: Intel Corporation
             identifiant matériel: 1f.4
             information bus: pci@0000:00:1f.4
             version: 21
             bits: 64 bits
             horloge: 33MHz
             configuration : driver=i801_smbus latency=0
             ressources : irq:16 mémoire:b142e000-b142e0ff portE/S:4040(taille=32)
     *-pnp00:00
          produit: PnP device PNP0c02
          identifiant matériel: 1
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:01
          produit: PnP device PNP0c02
          identifiant matériel: 2
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:02
          produit: PnP device PNP0c02
          identifiant matériel: 3
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:03
          produit: PnP device PNP0c02
          identifiant matériel: 5
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:04
          produit: PnP device PNP0b00
          identifiant matériel: 6
          fonctionnalités: pnp
          configuration : driver=rtc_cmos
     *-pnp00:05
          produit: PnP device INT3f0d
          identifiant matériel: 7
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:06
          produit: PnP device PNP0303
          identifiant matériel: 8
          fonctionnalités: pnp
          configuration : driver=i8042 kbd
     *-pnp00:07
          produit: PnP device PNP0c02
          identifiant matériel: 9
          fonctionnalités: pnp
          configuration : driver=system
     *-pnp00:08
          produit: PnP device PNP0c02
          identifiant matériel: a
          fonctionnalités: pnp
          configuration : driver=system
sophie@sophie-Aspire-A315-54K:~$ 

je vais essayer de voir pour le 2.4GHz, je suppose que c'est dans les paramètres de connexion à ma box

Hors ligne

#37 Le 24/10/2021, à 15:59

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

PS : je viens de vérifier, apparemment je suis connectée en 2.4GHz présentement. (dans les paramètres de la box sur mon ordi, premier onglet, ça m'indique "Vitesse de connexion : 1 Mb/s (2,4 GHz)")
Sais pas si c'est normal que dans les sorties ça indique 5GHz et que là ça soit marqué 2.4 ?

Hors ligne

#38 Le 24/10/2021, à 16:08

xubu1957

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Montre :

sudo dmesg | grep -Ei 'error|fail|firm|deauth|qos|crda|regdom|cfg80211|alpha2|wl|blue' | grep -viE 'acpi|ras|nvidia|eth'

piqué dans > forum.garudalinux.org/t/qca9377-no-wifi-networks


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 20.04 LTS - Lenovo T410 -18.04.1 LTS Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#39 Le 24/10/2021, à 16:10

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

[    0.082690] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.650346] integrity: Error adding keys to platform keyring UEFI:db
[    0.650349] integrity: Error adding keys to platform keyring UEFI:db
[    1.963722] EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    2.517655] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.517844] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.557370] Bluetooth: Core ver 2.22
[    2.557390] Bluetooth: HCI device and connection manager initialized
[    2.557394] Bluetooth: HCI socket layer initialized
[    2.557396] Bluetooth: L2CAP socket layer initialized
[    2.557399] Bluetooth: SCO socket layer initialized
[    2.623931] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[    2.623933] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[    2.749823] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.888665] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888678] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    2.888681] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[    2.888690] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888699] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888733] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    2.888737] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[    2.888746] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888755] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888763] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888770] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888778] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888785] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888792] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    2.888800] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[    2.888807] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[    2.979892] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[    2.995045] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[    3.328429] ath: EEPROM regdomain: 0x69
[    3.328435] ath: Country alpha2 being used: 00
[    3.334157] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.143982] Bluetooth: BNEP filters: protocol multicast
[    5.143987] Bluetooth: BNEP socket layer initialized
[    5.629429] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.629440] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    5.629442] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[    5.629450] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.629457] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.629463] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666164] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666177] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    5.666179] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[    5.666188] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666216] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    5.666217] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[    5.666226] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666234] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666241] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666249] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666256] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666263] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666270] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666277] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666284] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666290] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666297] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666304] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666311] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[    5.666317] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[    5.666325] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[    6.402470] Bluetooth: RFCOMM TTY layer initialized
[    6.402477] Bluetooth: RFCOMM socket layer initialized
[    6.402482] Bluetooth: RFCOMM ver 1.11
[   10.621140] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[   10.652807] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[   10.654526] wlp2s0: authenticated
[   10.660302] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[   10.664588] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[   10.666701] wlp2s0: associated
[   10.666780] ath: EEPROM regdomain: 0x80fa
[   10.666785] ath: Country alpha2 being used: FR
[   10.666787] ath: regdomain 0x80fa dynamically updated by country element
[   10.704360] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   10.731541] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[   47.344038] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
[   47.351616] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[   47.380456] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[   47.383869] wlp2s0: authenticated
[   47.388240] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[   47.391500] wlp2s0: RX ReassocResp from a4:3e:51:bd:9a:ab (capab=0x1511 status=0 aid=41)
[   47.393744] wlp2s0: associated
[   47.393823] ath: EEPROM regdomain: 0x80fa
[   47.393828] ath: Country alpha2 being used: FR
[   47.393830] ath: regdomain 0x80fa dynamically updated by country element
[   47.492794] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:bd:9a:ab
[   70.006117] wlp2s0: deauthenticated from a4:3e:51:bd:9a:ab (Reason: 12=<unknown>)
[   70.239058] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[   70.271017] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[   70.272903] wlp2s0: authenticated
[   70.280601] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[   70.284689] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[   70.286692] wlp2s0: associated
[   70.286789] ath: EEPROM regdomain: 0x80fa
[   70.286794] ath: Country alpha2 being used: FR
[   70.286796] ath: regdomain 0x80fa dynamically updated by country element
[   70.326155] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[  506.359826] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[  512.463393] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[  512.463396] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[  512.742462] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.742489] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  512.742498] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[  512.742525] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778340] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778353] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  512.778355] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[  512.778367] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778396] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[  512.778398] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[  512.778405] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778413] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778419] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778426] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778433] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778440] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778446] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[  512.778453] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778460] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778467] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778473] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778480] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778487] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778494] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778501] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[  512.778507] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[  512.818410] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[  545.019137] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[  545.050921] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[  545.052497] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[  545.053958] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[  545.055570] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[  549.719487] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[  549.754604] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[  549.756342] wlp2s0: authenticated
[  549.758019] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[  549.773354] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 2/3)
[  549.775092] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[  549.778106] wlp2s0: associated
[  549.778370] ath: EEPROM regdomain: 0x80fa
[  549.778390] ath: Country alpha2 being used: FR
[  549.778397] ath: regdomain 0x80fa dynamically updated by country element
[  549.853722] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[  550.803772] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  664.057604] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
[  664.065315] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[  664.096847] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[  664.098215] wlp2s0: authenticated
[  664.101499] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[  664.104925] wlp2s0: RX ReassocResp from a4:3e:51:bd:9a:ab (capab=0x1511 status=0 aid=42)
[  664.110835] wlp2s0: associated
[  664.111136] ath: EEPROM regdomain: 0x80fa
[  664.111153] ath: Country alpha2 being used: FR
[  664.111161] ath: regdomain 0x80fa dynamically updated by country element
[  664.151756] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:bd:9a:ab
[ 1129.996090] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 1130.031132] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 1130.032831] wlp2s0: authenticated
[ 1130.035830] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 1130.040867] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 1130.043588] wlp2s0: associated
[ 1130.043955] ath: EEPROM regdomain: 0x80fa
[ 1130.043975] ath: Country alpha2 being used: FR
[ 1130.043981] ath: regdomain 0x80fa dynamically updated by country element
[ 1130.159793] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 5080.412781] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 5080.724235] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5080.756001] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5080.757413] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5080.758723] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5080.760100] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5085.425687] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5085.477214] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5085.478972] wlp2s0: authenticated
[ 5085.480702] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5085.484997] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5085.487087] wlp2s0: associated
[ 5085.487187] ath: EEPROM regdomain: 0x80fa
[ 5085.487191] ath: Country alpha2 being used: FR
[ 5085.487193] ath: regdomain 0x80fa dynamically updated by country element
[ 5085.493014] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 5161.005501] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5161.037307] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5161.038722] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5161.040044] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5161.041650] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5165.758264] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5165.813017] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5165.818005] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 5165.822969] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 5165.842595] wlp2s0: authenticated
[ 5165.843310] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5165.859286] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 2/3)
[ 5165.897011] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5165.900147] wlp2s0: associated
[ 5165.900441] ath: EEPROM regdomain: 0x80fa
[ 5165.900456] ath: Country alpha2 being used: FR
[ 5165.900463] ath: regdomain 0x80fa dynamically updated by country element
[ 5170.383133] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 5170.892336] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 5224.800893] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 5225.122534] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 5225.154510] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 5225.156040] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 5225.157758] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 5225.159033] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 5229.830890] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 5229.882528] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 5229.884232] wlp2s0: authenticated
[ 5229.884974] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 5229.891318] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 5229.893727] wlp2s0: associated
[ 5229.893817] ath: EEPROM regdomain: 0x80fa
[ 5229.893821] ath: Country alpha2 being used: FR
[ 5229.893823] ath: regdomain 0x80fa dynamically updated by country element
[ 5229.980552] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 6135.910263] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 6136.222229] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6136.253720] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6136.255137] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6136.256554] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6136.257886] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6140.915931] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6140.946606] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6140.948215] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6140.949557] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6140.951008] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6146.507728] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6146.539246] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6146.540661] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6146.542255] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6146.543567] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6155.488104] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 6155.542351] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 6155.544068] wlp2s0: authenticated
[ 6155.546143] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 6155.550495] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 6155.553073] wlp2s0: associated
[ 6155.553366] ath: EEPROM regdomain: 0x80fa
[ 6155.553385] ath: Country alpha2 being used: FR
[ 6155.553393] ath: regdomain 0x80fa dynamically updated by country element
[ 6155.566716] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 6155.580684] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 6908.000527] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 6908.304849] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6908.336269] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6908.337605] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6908.338901] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6908.340637] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6922.540357] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 6922.595110] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 6922.600484] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 6922.605360] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 6922.610192] wlp2s0: authentication with a4:3e:51:bd:9a:a6 timed out
[ 6923.795847] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6923.830606] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6923.834114] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6923.836257] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6923.837742] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6942.528873] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6942.560626] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6942.561915] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6942.563288] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6942.564538] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 6957.157424] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 6957.188035] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 6957.189655] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 6957.191364] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 6957.192587] wlp2s0: authenticated
[ 6957.196140] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 6957.199652] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 2/3)
[ 6957.203235] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 3/3)
[ 6957.206765] wlp2s0: association with a4:3e:51:bd:9a:ab timed out
[ 6981.293432] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 6981.348360] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 6981.350044] wlp2s0: authenticated
[ 6981.351939] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 6981.360466] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 6981.362920] wlp2s0: associated
[ 6981.363015] ath: EEPROM regdomain: 0x80fa
[ 6981.363019] ath: Country alpha2 being used: FR
[ 6981.363021] ath: regdomain 0x80fa dynamically updated by country element
[ 6981.373438] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 6981.442289] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 7274.640555] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7280.124277] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 7280.124282] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 7280.404472] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.404492] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7280.404498] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[ 7280.404517] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440246] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440297] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7280.440303] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[ 7280.440321] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440336] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440349] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440362] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440375] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 7280.440388] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.440400] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 7280.480148] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 7285.372280] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 7285.406495] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 7285.411384] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 7285.416122] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 7285.420850] wlp2s0: authentication with a4:3e:51:bd:9a:a6 timed out
[ 7285.702224] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7285.733819] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7285.735341] wlp2s0: authenticated
[ 7285.739823] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[ 7285.743571] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 2/3)
[ 7285.747400] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 3/3)
[ 7285.751017] wlp2s0: association with a4:3e:51:bd:9a:ab timed out
[ 7290.401424] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 7290.436120] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 7290.437816] wlp2s0: authenticated
[ 7290.442079] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 7290.446430] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 7290.449089] wlp2s0: associated
[ 7290.449646] ath: EEPROM regdomain: 0x80fa
[ 7290.449671] ath: Country alpha2 being used: FR
[ 7290.449677] ath: regdomain 0x80fa dynamically updated by country element
[ 7290.459589] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 7290.462049] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 7779.374660] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7779.406477] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7779.407808] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 7779.409108] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 7779.410417] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 7996.383314] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 7996.413929] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 7996.415595] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 7996.417103] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 7996.418495] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 8011.513399] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 8011.545035] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 8011.546357] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 8011.547694] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 8011.548894] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 8026.394132] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8026.429162] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8026.430902] wlp2s0: authenticated
[ 8026.435017] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8026.443580] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8026.446114] wlp2s0: associated
[ 8026.446423] ath: EEPROM regdomain: 0x80fa
[ 8026.446438] ath: Country alpha2 being used: FR
[ 8026.446445] ath: regdomain 0x80fa dynamically updated by country element
[ 8026.462293] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 8026.515895] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 8036.194950] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 8036.569145] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 8036.600817] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 8036.602141] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 8036.603526] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 8036.604837] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 8041.269380] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8041.304063] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8041.308874] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 2/3)
[ 8041.313750] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 3/3)
[ 8041.318681] wlp2s0: authentication with a4:3e:51:bd:9a:a6 timed out
[ 8056.604065] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8056.637918] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8056.639604] wlp2s0: authenticated
[ 8056.642808] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8056.647053] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8056.649130] wlp2s0: associated
[ 8056.649245] ath: EEPROM regdomain: 0x80fa
[ 8056.649250] ath: Country alpha2 being used: FR
[ 8056.649252] ath: regdomain 0x80fa dynamically updated by country element
[ 8056.661833] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 8056.726059] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 8082.534750] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[ 8096.776855] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8096.810684] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8096.812342] wlp2s0: authenticated
[ 8096.814595] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8096.818841] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8096.820836] wlp2s0: associated
[ 8096.821735] ath: EEPROM regdomain: 0x80fa
[ 8096.821742] ath: Country alpha2 being used: FR
[ 8096.821743] ath: regdomain 0x80fa dynamically updated by country element
[ 8096.865247] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 8922.222284] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8928.096447] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 8928.096450] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 8928.364777] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.364803] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 8928.364812] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[ 8928.364837] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404601] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404665] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 8928.404673] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00001001/00002000
[ 8928.404706] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404726] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404745] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404762] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404779] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[ 8928.404798] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 8928.404816] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[ 8928.451840] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 8933.393718] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8933.428055] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8933.429829] wlp2s0: authenticated
[ 8933.432251] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8933.436691] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8933.439211] wlp2s0: associated
[ 8933.439392] ath: EEPROM regdomain: 0x80fa
[ 8933.439401] ath: Country alpha2 being used: FR
[ 8933.439406] ath: regdomain 0x80fa dynamically updated by country element
[ 8933.456047] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 8933.526290] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[ 8970.049004] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
[ 8970.055106] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[ 8970.086541] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[ 8970.088114] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[ 8970.089454] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[ 8970.090719] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[ 8970.264748] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[ 8970.299445] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[ 8970.301750] wlp2s0: authenticated
[ 8970.304390] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[ 8970.310469] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[ 8970.312775] wlp2s0: associated
[ 8970.312898] ath: EEPROM regdomain: 0x80fa
[ 8970.312903] ath: Country alpha2 being used: FR
[ 8970.312904] ath: regdomain 0x80fa dynamically updated by country element
[ 8970.595568] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[10235.281443] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[10241.156187] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[10241.156190] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[10241.451869] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.451898] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[10241.451907] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[10241.451934] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485590] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485632] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[10241.485637] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[10241.485647] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485654] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485662] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[10241.485668] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[10241.485675] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[10241.509313] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[10246.504090] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[10246.538602] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[10246.540291] wlp2s0: authenticated
[10246.545148] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[10246.549508] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[10246.552254] wlp2s0: associated
[10246.552480] ath: EEPROM regdomain: 0x80fa
[10246.552497] ath: Country alpha2 being used: FR
[10246.552505] ath: regdomain 0x80fa dynamically updated by country element
[10246.563592] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[10246.571462] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[11099.894248] wlp2s0: deauthenticating from a4:3e:51:bd:9a:a6 by local choice (Reason: 3=DEAUTH_LEAVING)
[11106.129386] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[11106.129397] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[11106.430124] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.430152] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[11106.430161] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[11106.469706] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469733] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[11106.469758] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00002041/00002000
[11106.469781] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469797] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[11106.469801] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00000001/00002000
[11106.469816] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469830] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[11106.469843] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469856] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469868] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469881] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469893] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5
[11106.469906] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
[11106.485582] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[11111.463032] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[11111.497215] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[11111.498936] wlp2s0: authenticated
[11111.501387] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[11111.505634] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[11111.507667] wlp2s0: associated
[11111.507759] ath: EEPROM regdomain: 0x80fa
[11111.507763] ath: Country alpha2 being used: FR
[11111.507765] ath: regdomain 0x80fa dynamically updated by country element
[11111.523471] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[11111.538651] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[12133.709173] wlp2s0: Connection to AP a4:3e:51:bd:9a:a6 lost
[12134.045166] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[12134.076054] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[12134.077575] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[12134.079774] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[12134.081297] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[12138.734988] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[12138.766339] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[12138.767695] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 2/3)
[12138.768971] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 3/3)
[12138.770368] wlp2s0: authentication with a4:3e:51:bd:9a:ab timed out
[12144.323824] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[12144.379012] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[12144.380708] wlp2s0: authenticated
[12144.384997] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[12144.389335] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[12144.392032] wlp2s0: associated
[12144.392280] ath: EEPROM regdomain: 0x80fa
[12144.392296] ath: Country alpha2 being used: FR
[12144.392302] ath: regdomain 0x80fa dynamically updated by country element
[12144.451949] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
sophie@sophie-Aspire-A315-54K:~$ 

Hors ligne

#40 Le 25/10/2021, à 08:28

NicoApi73

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,

Voici ce que j'ai trouvé : https://bbs.archlinux.org/viewtopic.php?id=233365. Je n'ai pas le temps d'aller plus loin ce matin. J'essaie de passer ce soir sur le forum.

Hors ligne

#41 Le 25/10/2021, à 08:33

xubu1957

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,

Montre :

systemctl | grep -i network

et :

ls -alrt /etc/NetworkManager/system-connections

en caviardant d'éventuelles données personnelles.

> [résolu] plusieurs fois le même réseau wifi

Dernière modification par xubu1957 (Le 25/10/2021, à 08:34)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 20.04 LTS - Lenovo T410 -18.04.1 LTS Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#42 Le 25/10/2021, à 08:59

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,

sophie@sophie-Aspire-A315-54K:~$ systemctl | grep -i network
  sys-devices-pci0000:00-0000:00:1c.5-0000:02:00.0-net-wlp2s0.device                     loaded active     plugged   QCA9377 802.11ac Wireless Network Adapter (Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter)
  sys-subsystem-net-devices-wlp2s0.device                                                loaded active     plugged   QCA9377 802.11ac Wireless Network Adapter (Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter)
  networkd-dispatcher.service                                                            loaded active     running   Dispatcher daemon for systemd-networkd                                                                
  NetworkManager-wait-online.service                                                     loaded active     exited    Network Manager Wait Online                                                                           
  NetworkManager.service                                                                 loaded active     running   Network Manager                                                                                       
  systemd-resolved.service                                                               loaded active     running   Network Name Resolution                                                                               
  systemd-timesyncd.service                                                              loaded active     running   Network Time Synchronization                                                                          
  network-online.target                                                                  loaded active     active    Network is Online                                                                                     
  network.target                                                                         loaded active     active    Network                                                                                               
  nss-lookup.target                                                                      loaded active     active    Host and Network Name Lookups                                                                         
sophie@sophie-Aspire-A315-54K:~$
sophie@sophie-Aspire-A315-54K:~$ ls -alrt /etc/NetworkManager/system-connections
total 12
-rw------- 1 root root  358 oct.   9  2020 Livebox-9AA6.nmconnection
drwxr-xr-x 7 root root 4096 nov.  20  2020 ..
drwxr-xr-x 2 root root 4096 oct.  23 12:23 .
sophie@sophie-Aspire-A315-54K:~$ 

Hors ligne

#43 Le 26/10/2021, à 08:38

NicoApi73

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,

Peux tu donner le retour de

systemctl list-unit-files --state=enabled

Hors ligne

#44 Le 26/10/2021, à 17:50

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonsoir,
voilà

sophie@sophie-Aspire-A315-54K:~$ systemctl list-unit-files --state=enabled
UNIT FILE                                  STATE   VENDOR PRESET
snap-bare-5.mount                          enabled enabled      
snap-core18-2074.mount                     enabled enabled      
snap-core18-2128.mount                     enabled enabled      
snap-gnome\x2d3\x2d28\x2d1804-145.mount    enabled enabled      
snap-gnome\x2d3\x2d28\x2d1804-161.mount    enabled enabled      
snap-gnome\x2d3\x2d34\x2d1804-66.mount     enabled enabled      
snap-gnome\x2d3\x2d34\x2d1804-72.mount     enabled enabled      
snap-gtk\x2dcommon\x2dthemes-1515.mount    enabled enabled      
snap-gtk\x2dcommon\x2dthemes-1519.mount    enabled enabled      
snap-snap\x2dstore-542.mount               enabled enabled      
snap-snap\x2dstore-547.mount               enabled enabled      
snap-snapd-13270.mount                     enabled enabled      
snap-snapd-13640.mount                     enabled enabled      
acpid.path                                 enabled enabled      
apport-autoreport.path                     enabled enabled      
cups.path                                  enabled enabled      
accounts-daemon.service                    enabled enabled      
anacron.service                            enabled enabled      
apache2.service                            enabled enabled      
apparmor.service                           enabled enabled      
autovt@.service                            enabled enabled      
avahi-daemon.service                       enabled enabled      
lines 1-23...skipping...
UNIT FILE                                  STATE   VENDOR PRESET
snap-bare-5.mount                          enabled enabled      
snap-core18-2074.mount                     enabled enabled      
snap-core18-2128.mount                     enabled enabled      
snap-gnome\x2d3\x2d28\x2d1804-145.mount    enabled enabled      
snap-gnome\x2d3\x2d28\x2d1804-161.mount    enabled enabled      
snap-gnome\x2d3\x2d34\x2d1804-66.mount     enabled enabled      
snap-gnome\x2d3\x2d34\x2d1804-72.mount     enabled enabled      
snap-gtk\x2dcommon\x2dthemes-1515.mount    enabled enabled      
snap-gtk\x2dcommon\x2dthemes-1519.mount    enabled enabled      
snap-snap\x2dstore-542.mount               enabled enabled      
snap-snap\x2dstore-547.mount               enabled enabled      
snap-snapd-13270.mount                     enabled enabled      
snap-snapd-13640.mount                     enabled enabled      
acpid.path                                 enabled enabled      
apport-autoreport.path                     enabled enabled      
cups.path                                  enabled enabled      
accounts-daemon.service                    enabled enabled      
anacron.service                            enabled enabled      
apache2.service                            enabled enabled      
apparmor.service                           enabled enabled      
autovt@.service                            enabled enabled      
avahi-daemon.service                       enabled enabled      
bluetooth.service                          enabled enabled      
console-setup.service                      enabled enabled      
cron.service                               enabled enabled      
cups-browsed.service                       enabled enabled      
cups.service                               enabled enabled      
dbus-fi.w1.wpa_supplicant1.service         enabled enabled      
dbus-org.bluez.service                     enabled enabled      
dbus-org.freedesktop.Avahi.service         enabled enabled      
dbus-org.freedesktop.ModemManager1.service enabled enabled      
dbus-org.freedesktop.nm-dispatcher.service enabled enabled      
dbus-org.freedesktop.resolve1.service      enabled enabled      
dbus-org.freedesktop.thermald.service      enabled enabled      
dbus-org.freedesktop.timesync1.service     enabled enabled      
dmesg.service                              enabled enabled      
e2scrub_reap.service                       enabled enabled      
getty@.service                             enabled enabled      
gpu-manager.service                        enabled enabled      
lines 1-40






































UNIT FILE                                  STATE   VENDOR PRESET
snap-bare-5.mount                          enabled enabled      
snap-core18-2074.mount                     enabled enabled      
snap-core18-2128.mount                     enabled enabled      
snap-gnome\x2d3\x2d28\x2d1804-145.mount    enabled enabled      
snap-gnome\x2d3\x2d28\x2d1804-161.mount    enabled enabled      
snap-gnome\x2d3\x2d34\x2d1804-66.mount     enabled enabled      
snap-gnome\x2d3\x2d34\x2d1804-72.mount     enabled enabled      
snap-gtk\x2dcommon\x2dthemes-1515.mount    enabled enabled      
snap-gtk\x2dcommon\x2dthemes-1519.mount    enabled enabled      
snap-snap\x2dstore-542.mount               enabled enabled      
snap-snap\x2dstore-547.mount               enabled enabled      
snap-snapd-13270.mount                     enabled enabled      
snap-snapd-13640.mount                     enabled enabled      
acpid.path                                 enabled enabled      
apport-autoreport.path                     enabled enabled      
cups.path                                  enabled enabled      
accounts-daemon.service                    enabled enabled      
anacron.service                            enabled enabled      
apache2.service                            enabled enabled      
apparmor.service                           enabled enabled      
autovt@.service                            enabled enabled      
avahi-daemon.service                       enabled enabled      
bluetooth.service                          enabled enabled      
console-setup.service                      enabled enabled      
cron.service                               enabled enabled      
cups-browsed.service                       enabled enabled      
cups.service                               enabled enabled      
dbus-fi.w1.wpa_supplicant1.service         enabled enabled      
dbus-org.bluez.service                     enabled enabled      
dbus-org.freedesktop.Avahi.service         enabled enabled      
dbus-org.freedesktop.ModemManager1.service enabled enabled      
dbus-org.freedesktop.nm-dispatcher.service enabled enabled      
dbus-org.freedesktop.resolve1.service      enabled enabled      
dbus-org.freedesktop.thermald.service      enabled enabled      
dbus-org.freedesktop.timesync1.service     enabled enabled      
dmesg.service                              enabled enabled      
lines 1-37

est-ce normal que ça ne revienne pas à l'invite de commande habituelle ?

Hors ligne

#45 Le 26/10/2021, à 18:11

iznobe

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonsoir , pour ceux qui aident , je me permet une remarque , bien que je ne sois pas du tout expert en la matiere mais bon ...
On remarque dans le retour du message #39  ce passage qui me parait etre la cause du probleme et qui semble correspondre a une connexion automatique a une autre BOX ? avec une adresse MAC semblable , mais differente ( puisque le derniere caractere est different b ou 6 selon le cas ) , puis qui re deco et se reco sur l' adresse MAC " primaire " :

[   10.621140] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[   10.652807] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[   10.654526] wlp2s0: authenticated
[   10.660302] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[   10.664588] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[   10.666701] wlp2s0: associated
[   10.666780] ath: EEPROM regdomain: 0x80fa
[   10.666785] ath: Country alpha2 being used: FR
[   10.666787] ath: regdomain 0x80fa dynamically updated by country element
[   10.704360] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   10.731541] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[   47.344038] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
[   47.351616] wlp2s0: authenticate with a4:3e:51:bd:9a:ab
[   47.380456] wlp2s0: send auth to a4:3e:51:bd:9a:ab (try 1/3)
[   47.383869] wlp2s0: authenticated
[   47.388240] wlp2s0: associate with a4:3e:51:bd:9a:ab (try 1/3)
[   47.391500] wlp2s0: RX ReassocResp from a4:3e:51:bd:9a:ab (capab=0x1511 status=0 aid=41)
[   47.393744] wlp2s0: associated
[   47.393823] ath: EEPROM regdomain: 0x80fa
[   47.393828] ath: Country alpha2 being used: FR
[   47.393830] ath: regdomain 0x80fa dynamically updated by country element
[   47.492794] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:bd:9a:ab
[   70.006117] wlp2s0: deauthenticated from a4:3e:51:bd:9a:ab (Reason: 12=<unknown>)
[   70.239058] wlp2s0: authenticate with a4:3e:51:bd:9a:a6
[   70.271017] wlp2s0: send auth to a4:3e:51:bd:9a:a6 (try 1/3)
[   70.272903] wlp2s0: authenticated
[   70.280601] wlp2s0: associate with a4:3e:51:bd:9a:a6 (try 1/3)
[   70.284689] wlp2s0: RX AssocResp from a4:3e:51:bd:9a:a6 (capab=0x1411 status=0 aid=1)
[   70.286692] wlp2s0: associated

en tout cas cela ne me semble pas normal de deco et reco sur autre adresse MAC .
en particulier ces lignes :

[   10.731541] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by a4:3e:51:bd:9a:a6
[   47.344038] wlp2s0: disconnect from AP a4:3e:51:bd:9a:a6 for new auth to a4:3e:51:bd:9a:ab
.....................................................................................................
[   47.492794] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:bd:9a:ab
[   70.006117] wlp2s0: deauthenticated from a4:3e:51:bd:9a:ab (Reason: 12=<unknown>)
[   70.239058] wlp2s0: authenticate with a4:3e:51:bd:9a:a6

est il possible que la carte wifi de l' ordi se deco du 2.4Ghz de la box pour passer sur le wifi 5Ghz de la box et vice versa selon comment elle capte l' une ou l' autre ?
si tel est le cas , dans les parametres de la box , il suffirait de desactiver le wifi 5Ghz .

Si j' ai dis n ' importe quoi , j ' en suis desolé roll

Dernière modification par iznobe (Le 26/10/2021, à 18:19)


retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM . avec Ubuntu , LM et W$10

Hors ligne

#46 Le 26/10/2021, à 21:30

NicoApi73

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Salut iznobe,

Je te remerice (sincèrement) pour ton intervention. Je n'ai pas pris le temps de partager mon analyse (qui est incomplète pour l'instant).

Tout d'abord, tu n'as pas dit n'importe quoi : au #25, nous voyons les adresses MAC des bornes WiFi. La Livebox-9AA6 est effectivement bi-bande. L'interface ayant l'adresse MAC A4:3E:51:BD:9A:A6 est celle à 2.4GHz, celle ayant l'adresse MAC A4:3E:51:BD:9A:AB est celle à 5GHz.

Pour l'instant je n'arrive pas à déterminer la source de la déconnexion : est ce la box qui génère les déconnexions ou est ce la machine qui les génère.

Lors d'une recherche rapide, je suis tombé sur le fil cité au #40, dans lequel un conflit sur la machine aurait été identifié. J'essaie de voir si c'est la même situation.

Ton intervention m'a fait réanalyser les retours, et je suis passé à côté de quelque chose : les niveaux de réception ne sont pas terribles. (voir #25). La première chose à tenter serait peut être de rapprocher la machine de la box pour voir si les déconnexions sont liées à la qualité de la réception.

Hors ligne

#47 Le 26/10/2021, à 21:33

NicoApi73

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

marie_p19 a écrit :

est-ce normal que ça ne revienne pas à l'invite de commande habituelle ?

Oui c'est normal : toutes les lignes n'ont pas été affichées. Déplace toi avec la flèche vers le bas pour afficher les suivantes. On quitte l'affichage en appuyant sur la lettre q

Hors ligne

#48 Le 27/10/2021, à 08:23

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,

comme je disais précédemment, il est certain que la qualité de réception n'aide certainement pas, mais nous étions dans un gîte récemment et mon ordinateur même à côté de la source du wifi, avec une réception pourtant excellente, se déconnectait quand même de temps en temps. De mémoire, il s'agissait notamment de difficultés à se reconnecter en sortie de veille, ça pouvait durer plusieurs minutes.

Concernant chez nous, nous sommes dans une maison (en loc, donc aucun moyen d'agir sur le logement lui-même) avec une seule prise téléphonique, à un bout de la maison. Donc il est tout à fait vrai que tous les remarques précédentes sur la bonne diffusion du signal wifi s'appliquent certainement. Les murs sont épais, et on voit le signal wifi s'amenuiser d'une pièce à l'autre.
Cependant au vu du comportement de mon ordi vs celui des autres machines + son comportement quand le wifi est bon, il me semble que mon ordi rencontre un souci supplémentaire qui ne semble pas lié à la qualité de réception (cf expérience du gîte).

Je vais tester en me rapprochant de la box comme je peux, ce n'est pas une pièce aménagée pour travailler il n'y a même pas de table donc il faut que je vois comment je m'organise. J'essayerai de venir faire le feedback quand je peux selon les essais, à mon avis pas avant ce week-end.
En plus d'observer le comportement de l'ordinateur, y'a-t-il des tests particuliers à lancer en étant plus proche de la box ?

Oui c'est normal : toutes les lignes n'ont pas été affichées. Déplace toi avec la flèche vers le bas pour afficher les suivantes. On quitte l'affichage en appuyant sur la lettre q

ok merci beaucoup pour l'explication !

Hors ligne

#49 Le 27/10/2021, à 08:35

NicoApi73

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,

Je comprends. L'objectif pour l'instant est de poser un diagnostic. On sait qu'il y a des déconnexions en cours d'utilisation et c'est ça que j'essaie de résoudre.

La sortie de veille peut poser problème avec Linux, allant jusqu'à l'écran noir pour certaines machines. Et de plus, pour le gîte, nous manquons d'informations (pas de logs).

Hors ligne

#50 Le 31/10/2021, à 17:30

marie_p19

Re : Activation connexion réseau Wifi échoue régulièrement [Contourné]

Bonjour,
pour tenir au courant : j'ai approché en partie l'ordi de la box ce week-end, mais je n'ai pratiquement pas eu de déconnexion même ailleurs dans la maison ces deux jours, sais pas pourquoi, il y a des jours où ça le fait et d'autres non. Je comptais notamment profiter d'un moment où ça bugge pour voir si en me rapprochant de la box ça se reconnecte, mais du coup je n'ai pas pu tester ça.
Donc je vous re-tiens au courant quand j'ai du nouveau concret après mes essais.

Hors ligne