#26 Le 27/11/2021, à 21:44
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
la valeur de Power_On_Hours me perturbe!!! elle devrait être beaucoup plus haute
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#27 Le 27/11/2021, à 21:55
- iznobe
Re : ata2.00: failed to set xfermode (err_mask=0x40)
16436 heures de fonctionnement , soit 685 jours ( arrondis ) , j' ai aussi eu une surprise au depart avec cette valeur , mais le disque a plein d' attribut non reconnu ... pas facile de se depatouiller , il est en resultat " test passed ", mais affiche des failed sur certains trucs .
ce qui me perturbe le plus c' est cette ligne :
195 Hardware_ECC_Recovered ------ 100 100 050 - 8190A mon niveau je ne peux pas en dire grand chose de tres precis , faut attendre l ' avis d' une personne bien calée sur les SSD .
Dernière modification par iznobe (Le 27/11/2021, à 21:56)
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#28 Le 27/11/2021, à 22:02
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
si on compar avec l'autre disque
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-162-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 EVO 500GB
Serial Number: S1DHNSAF639539X
LU WWN Device Id: 5 002538 8a04f5dd3
Firmware Version: EXT0BB6Q
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 27 21:01:10 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6600) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 097 097 000 - 14823
12 Power_Cycle_Count -O--CK 099 099 000 - 879
177 Wear_Leveling_Count PO--C- 090 090 000 - 111
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 077 056 000 - 23
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
199 CRC_Error_Count -OSRCK 100 100 000 - 0
235 POR_Recovery_Count -O--C- 099 099 000 - 141
241 Total_LBAs_Written -O--CK 099 099 000 - 94808483783
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 16 Device vendor specific log
0xce GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 23 Celsius
Power Cycle Min/Max Temperature: ?/ ? Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/81826
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 128 (11)
Index Estimated Time Temperature Celsius
12 2021-11-26 23:50 ? -
... ..(115 skipped). .. -
0 2021-11-27 19:10 ? -
1 2021-11-27 19:20 28 *********
2 2021-11-27 19:30 24 *****
3 2021-11-27 19:40 23 ****
4 2021-11-27 19:50 23 ****
5 2021-11-27 20:00 22 ***
6 2021-11-27 20:10 22 ***
7 2021-11-27 20:20 23 ****
8 2021-11-27 20:30 23 ****
9 2021-11-27 20:40 24 *****
10 2021-11-27 20:50 23 ****
11 2021-11-27 21:00 23 ****
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRCCooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#29 Le 27/11/2021, à 22:13
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
je pense qu'il y a un problème avec cette valeur car on la retrouve a plein d’endroits différent (numéro de version par exemple). moi la valeur que je vois c'est 156 heures!!!
c'est comme si il avait craché et que pas mal de valeur avaient planté!!!
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#30 Le 27/11/2021, à 22:14
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
bon on verra ça demain je pense. je vais finir la réinstallation de mon ubuntu 18.04
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne