Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

panteraps36 · Le 06/05/2023, à 21:00

bonjour
je viens de passer de 16.4 à 22.4
après quelques problèmes avec dvd d'installation j'ai utilisé une clé bootable et l'installation a été sans problème
Par contre pas moyen de faire fonctionner l'imprimante pourtant reconnue
CUPS ne donne rien non plus

Dernière modification par panteraps36 (Le 10/05/2023, à 16:52)

xubu1957 · Le 06/05/2023, à 21:30

Bonjour,

C'est le bon modèle dans le titre ?

Pour info > [Résolu]Canon MG 2550 ne se lance pas après passage à Ubuntu 22.04 LTS

panteraps36 · Le 06/05/2023, à 22:34

oui j'ai revérifié
j'ai un peu cherché depuis : le scan marche sans problème
et sur CUPS elle figure bien mais en essayant d'imprimer la page test j'ai: Unsupported format "application/vnd-cups-pdf-banner"
sur le site Canon plus de pilotes pour ce modèle (?)
j'ai trouvé sur un forum cups des gens qui avait le même problème mais un peu compliqué pour moi en anglais
j'ai vaguement compris que l'un d'eux avait purgé CUPS puis tout remis mais en trouvant les pilotes (Epsom)

xubu1957 · Le 06/05/2023, à 22:39

C'est une imprimante MG2550S canon.fr/printers/inkjet/pixma/pixma_mg2550s ?

Il faudrait fournir > les Informations utiles à donner lorsque j'ai un problème.

panteraps36 · Le 07/05/2023, à 07:55

j'ai changé de tour et j'ai toujours l'ancienne tour
elle était en 16.4
le pilote pour cette canon y est donc ;un moyen de le récupérer ??
de plus le modèle est toujours en vente mais pas de pilote pour Linux
ou quelqu'un a ce pilote?

iznobe · Le 07/05/2023, à 10:28

Bonjour , le titre de la présente discussion est :
Problème installation imprimante Canon MG 25505 sous 22.4
et vous parlez d ' une imprimante Canon MG 2550S ?

il faudrait peut etre accorder les violons car du coup on peut pas dire que ca soit très clair

Dernière modification par iznobe (Le 07/05/2023, à 10:29)

xubu1957 · Le 07/05/2023, à 11:36

Bonjour,

As-tu pris la peine de lire cette discussion /viewtopic.php?id=2071811, mentionnant la mise en place d'un ppa ?

_ _ _

(edit=messages regroupés)
_ _ _

Je n'ai pas trouvé la référence Canon MG 25505 sur la Toile.

Question posée aux #2 et #4.

Et l'approximation ne fait pas bon ménage avec l'informatique.

Dernière modification par xubu1957 (Le 07/05/2023, à 23:30)

panteraps36 · Le 07/05/2023, à 21:43

j'ai rectifié : c'est CANON 2550S

xubu1957 · Le 07/05/2023, à 22:36

Pour rectifier le modèle dans le titre, en éditant ta discussion, il faut utiliser le bouton Modifier au bas de ton premier message.

Merci

Essaye :

sudo apt update

sudo add-apt-repository -y ppa:thierry-f/fork-michael-gruz

et donne les retours, pour aider les aidants.

panteraps36 · Le 07/05/2023, à 22:57

r

auner@rauner-OptiPlex-3010:~$ sudo apt update
[sudo] Mot de passe de rauner : 
Réception de :1 [url]http://security.ubuntu.com/ubuntu[/url] jammy-security InRelease [110 kB]
Atteint :2 [url]http://fr.archive.ubuntu.com/ubuntu[/url] jammy InRelease            
Atteint :3 [url]http://fr.archive.ubuntu.com/ubuntu[/url] jammy-updates InRelease
Atteint :4 [url]http://fr.archive.ubuntu.com/ubuntu[/url] jammy-backports InRelease
110 ko réceptionnés en 11s (10,5 ko/s)                               
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Tous les paquets sont à jour.
rauner@rauner-OptiPlex-3010:~$

Dernière modification par panteraps36 (Le 07/05/2023, à 23:00)

xubu1957 · Le 07/05/2023, à 22:58

Pour ajouter toi-même les balises code à ton précédent message #10 :

Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message

_ _ _

(edit=messages regroupés)
_ _ _

Tu as passé la deuxième commande ?

Dernière modification par xubu1957 (Le 07/05/2023, à 23:31)

panteraps36 · Le 07/05/2023, à 23:01

merci j'avais oublier de sélectionner le texte

panteraps36 · Le 07/05/2023, à 23:04

 sudo add-apt-repository -y ppa:thierry-f/fork-michael-gruz
[sudo] Mot de passe de rauner : 
PPA publishes dbgsym, you may need to include 'main/debug' component
Dépôt : « deb https://ppa.launchpadcontent.net/thierry-f/fork-michael-gruz/ubuntu/ jammy main »
Description :
Fork of the PPA : https://launchpad.net/~michael-gruz/+archive/ubuntu/canon-trunk
To make it available for new distributions.

Official drivers of Canon printers and multifunction devices, included versions 2.20 and newer (2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3.0, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8)

Scangearmp2 driver add the 10/2019
=============================
   TS5350i, G600, TS3500, TR4600, E4500, TR4700, XK500, TS8530, XK100, TS7530, TS7450i, GX6000, GX7000, TS5400, TS3400, E3400, TR7000, G2020, G3060, G2060, G3020, TS7430, XK90, TS8430, TR7600, TR8600, TR8630, TS6400, TS7400, G7000, G7080, GM4000, GM4080, G6000, G6080, TS5300, TS5380, TS6300, TS6380, TS7330, TS8300, TS8380, TS8330, XK60, TS6330, TS3300, E3300, TS8200, XK80, TS8230, TS8280, TS6200, TS6230, TS6280, TS9500, TR9530, TS9580, TR4500, E4200, LiDE 400, LiDE 300, G3010, G4010, TS9100, TS8100, TS6100, TR8500, TR7500, TS5100, TS3100, E3100, TS9180, TS8180, TS6180, TR8580, TS8130, TS6130, TR8530, TR7530, XK50, XK70, TS9000, TS8000, TS6000, TS5000, MG3000, E470, G4000, MB2100, MB2700, MB5100, MB5400, G3000, MG7700, MG6900, MG6800, MG5700, MG3600, MX450, MX490, E480, MG7500, MG6600, MG5600, MG2900, MB2000, MB2300, MB5000, MB5300, E460

Cnijfilter2 driver add the 10/2019
===========================
   E200, E300, E3100, E3300, E3400, E4200, E4500, E460, E470, E480, G1020, G2020, G2060, G3000, G3010, G3020, G3060, G4000, G4010, G5000, G500, G5080, G6000, G600, G6080, G7000, G7080, GM2000, GM2080, GM4000, GM4080, GX6000, GX7000, IB4000, IB4100, IP110, MB2000, MB2100, MB2300, MB2700, MB5000, MB5100, MB5300, MB5400, MG2900, MG3000, MG3600, MG5600, MG5700, MG6600, MG6800, MG6900, MG7500, MG7700, MX490, TR150, TR4500, TR4600, TR4700, TR7000, TR703, TR7500, TR7530, TR7600, TR8500, TR8530, TR8580, TR8600, TR8630, TR9530, TS200, TS300, TS3100, TS3300, TS3400, TS3500, TS5000, TS5100, TS5300, TS5350I, TS5380, TS5400, TS6000, TS6100, TS6130, TS6180, TS6200, TS6230, TS6280, TS6300, TS6330, TS6380, TS6400, TS700, TS708, TS7330, TS7400, TS7430, TS7450I, TS7530, TS8000, TS8100, TS8130, TS8180, TS8200, TS8230, TS8280, TS8300, TS8330, TS8380, TS8430, TS8530, TS9000, TS9100, TS9180, TS9500, TS9580, XK100, XK500, XK50, XK60, XK70, XK80, XK90

UFRII driver add the 10/2019
=======================
   MF540 Series, MF642C/643C/644C, iR-ADV C7565 III, LBP622C/623C, MF645C,
   iR-ADV C5550/5560 III, iR2625/2630, LBP227, iPR C165, LBP323/324/325,
   WG7000 Series, iR2635/2645, MF745C/746C, iR-ADV 4545/4551, LBP8750,
   LBP3980M, LBP253, D1300 Series, MF8300 Series, LBP7600C, iPR C1PLUS,
   iR2422, iR1018/1022/1023, iR-ADV 8505, MF8500C Series, LBP251,
   MF6100 Series, iR-ADV C3320, LBP8900, LBP310/311/312, MF520 Series,
   iR-ADV C2020/2030, MF4700 Series, iR-ADV 6255/6265, MF4500w Series,
   iR C5185, MF420 Series, MF720C Series, MF633C/635C, D530/D560,
   L90/L160/L230, iPR C850, MF240 Series, MF7200 Series, MF4500 Series,
   MF4500 Series, MF632C/634C, iR1020/1024/1025, LBP6670, MF240 Series,
   iPR C1, LC600 Series, iR5570/iR6570, MF3010, iR5570/iR6570, MF417,
   MF720C Series, iR-ADV C5045/5051, iR2420, iR7086-7105, MF4320-4350,
   MF631C, iR-ADV 6275, LBP841C, iR-ADV C2025, MF4800 Series, LBP443,
   iR C2880/C3380, MF8300 Series, iR-ADV 8585/8595, iR-ADV C5235/5240,
   LBP712C, LBP441e, LBP653C/654C, MF631C, MF8300C Series, MF510 Series,
   MF4400w Series, LBP252 CARPS2, iR2422, MF633C/635C, LBP842C, D400-450,
   iR-ADV C7280, iR-ADV 4225/4235, L90/L160/L230, MF8400, LBP8780,
   iR3570/iR4570, MF4360-4390, iR C5180, iR-ADV 4045/4051, iR2002/2202,
   MF410 Series, iR-ADV C9270/9280, MF4010 Series, iR C5880/C6880,
   LBP9510C, LBP3950, MF220 Series, iR-ADV C2220/2230, MF6500 Series,
   LBP8730, iR C1325/1335, iR C5870, iR C5180, MF4700 Series, MF9200 Series,
   MF8000 Series, LBP7750C/5460, iR-ADV C250/350, iR8070, iR3030, MF632C/634C,
   iR3235/iR3245, iR3235/iR3245, iR-ADV 6055/6065, iR-ADV 400/500, MF6800 Series,
   iPR C1, LBP8720/8710, iR1018/1022/1023, iR-ADV C3520, iPR C750,
   MF4700 Series, iPR C750, MF4010 Series, iR C1021/C1022, iR1730/1740/1750,
   iR1020/1024/1025, MF735C, iR C2110, D500 Series, LBP8630/8620/8610,
   iR C5870, iR-ADV C256/356, iR2020, iR-ADV 8205, MF8300C Series, MF220 Series,
   iR-ADV 4045, iR105PLUS, MF4800 Series, iR 3180C EUR, MF3010, MF240 Series,
   MF6100 Series, iR-ADV 6055/6065, D460-490, iR2002/2202, iR-ADV 6275,
   MF4360-4390, MF6500 Series, LBP253, MF620C Series, iR-ADV C3320,
   iR-ADV 8085/8095, L410 Series, LBP710C, MF8200C Series, MF110/910 Series,
   L1000, MF732C/734C/735C, iR-ADV C9060/9070, iR2230, MF4500 Series, D530/D560,
   iR-ADV C255/355, LBP312, iR-ADV 4025/4035, iR-ADV 8585/8595, iR2525/2530,
   iR-ADV C2225, iR85PLUS, imageRUNNER1133 series, MF210 Series, LBP3370,
   MF5900 Series, iR-ADV 4245, LBP6710, iR2020, MF8400, MF731C/733C, MF4800 Series,
   MF210 Series, iR-ADV 4245/4251, MF8200C Series, iR-ADV 4545/4551, LBP5360,
   iR C1325/1335, MF110/910 Series, MF7200 Series, iR-ADV C3325/3330, iPR C600,
   MF731C/733C, iR C2550, LBP213, iR-ADV C7260/7270, MF6700 Series, iPR C700/800,
   MF260 Series, iR-ADV C7055/7065, MF9200 Series, iR-ADV C2218, iR-ADV 6555/6565,
   iR-ADV C5535/5540, MF230 Series, MF4400 Series, LBP5900, LBP841C,
   MF5800 Series, iR-ADV C5030/5035, MF732C/734C/735C, iR2525/2530,
   L90/L160/L230, iR-ADV 4025/4035, LBP9650C, iR-ADV 6075, LBP612C/613C,
   iR-ADV 8205, iR-ADV C9270/9280, iPR C1PLUS, LBP6650, LBP6680/3480,
   iR-ADV 4525/4535, MF8500C Series, iPR C850, iR2520, iR-ADV C351, iR2420,
   iPR C850, iR-ADV C3320L, iR-ADV C2020/2030, iR-ADV C7580/7570, iR-ADV C5535/5540,
   iR C1225, iR-ADV 8085/8095, L100/L150/L170, MF4100 Series, iR-ADV C9065,
   iR C3180, LBP5400, iR C5880/C6880, iR-ADV C9075, iR-ADV 4545, MF4200 Series,
   MF9100/9300, iR-ADV C2020L/2030L, MF4500w Series, iR2004/2204, iR C1028/C1030,
   iR8570N, LBP5970/5975, iR2520, LBP9950C/9900C, MF8300C Series, L190/L410 Series,
   LBP215, MF810/820, iR-ADV C255/355, LBP310/311/312, iR3025, LBP9520C, LBP6600,
   iR-ADV C5250/5255, LC800/L3000, LBP843C, D1500 Series, LBP9660C, MF4200 Series,
   iR-ADV C7580/7570, LBP7780C/5480, iR-ADV C3320/3330, MF4100 Series, iR3035/iR3045,
   MF8500C Series, MF8000 Series, MF4320-4350, iR2022/2025/2030, LBP351/352,
   MF4600 Series, LBP653C/654C, iR-ADV C2020i/2030i, LBP651C, iR2016, MF7400 Series,
   MF5900 Series, iR-ADV C7580/7570, MF210 Series, MF8000C Series, D1100,
   iR-ADV C355, LBP9600C/9500C, MF4400 Series, iR-ADV C5235/5240, LBP3800,
   MF4400 Series, LBP712C, LBP611C, MF720C Series, iR2022/2025/2030, LBP4500,
   LBP843C, LBP6700, iPR C650, LBP214, LBP161/162, MF8000C Series, LBP3920/3970,
   iR9070, MF5800 Series, MF260 Series, LBP7660C, iPR C750, LBP6780/3580, iR3230,
   iR C6870, iR2318/2320, LBP652C/654C, iR C1028/C1030, MF731C/733C, iR5075,
   iR-ADV C5045/5051, iR-ADV C2220/2230, iR2016, MF220 Series, D570, iR-ADV C256/356,
   iR-ADV C3525/3530, MF8400, iR C1021/C1022, iR2270/iR2870, LBP215, D400-450,
   MF520 Series, iR-ADV C356, LBP611C, LBP351/352, iR-ADV 6255/6265, iPR C700/800,
   iR C2580, iR-ADV 8505, D500 Series, LBP441, LBP3910/3930, iR-ADV 8505,
   iR C3000 Series, iR-ADV C9065/9075, iR-ADV 8285/8295, iR-ADV 6575,
   iR2535/2545, LBP612C/613C, iR2270/iR2870, LBP161/162, MF4600 Series,
   MF632C/634C, iR C4080/C4580, MF4360-4390, MF620C Series, MF620C Series,
   iR-ADV 4525/4535, LBP351/352, iR-ADV C5550/5560, iR-ADV 6575, iR-ADV C3325/3330,
   LBP214, iR3225, MF8200C Series, iR3530, iR-ADV 6555/6565, iR-ADV C7260/7270,
   LBP5910M, LBP3360, MF9100/9300, LBP3980, iR-ADV 8285/8295, iR3025, iR C5185,
   iR5075, LBP211/212, iR C2380/2550, L100/L150/L170, LBP251, iR-ADV 8105,
   MF8300 Series, iR-ADV 6555/6565, iR7086-7105, LBP7700C, iR1435, MF4600 Series,
   MF6500 Series, D1300 Series, iR-ADV 6560, MF230 Series, iR 5880C/6880C EUR,
   iR C4080, LBP3410, iR C3880/C4580, MF4100 Series, D1100, LBP3700,
   iR C3000 Series, iR5055/iR5065, iR2830, iR3035/iR3045, iR1435, MF8000C Series,
   MF420 Series, LBP251 CARPS2, iR2535/2545, iR105i, LBP253, iPR C650, MF9200 Series,
   D460-490, MF520 Series, iR-ADV C5030/5035, iR-ADV C3520/3530, iR-ADV 8585/8595,
   iR-ADV 4525/4535, iR-ADV C5250/5255, LBP712C, iR-ADV C5535/5540, iR2018,
   iR3570/iR4570, iR C3080/3480/3580, iPR C700/800, LBP6750/3560, MF7100 Series,
   iR2230, MF410 Series, iR C3080/C3580, MF8000 Series, iR-ADV C7565, MF4320-4350,
   iR-ADV C7565, LBP6670, LBP6650/3470, MF4200 Series, iR C6870, D400-450,
   iR C2880/C3380, MF810/820, iR5055/iR5065, iR-ADV C7565, L190/L410 Series,
   LBP3460, LBP612C, iR-ADV 8105, iR C3000 Series, iR2318/2320, LBP7660C, LBP252,
   iR7270N, LBP252, LC800/L3000, LBP5960, iR2006/2206, MF510 Series, L250, LBP442,
   iR1730/1740/1750, LBP5910, iR2018, iR-ADV C7055/7065, iR-ADV C5550/5560,
   iR-ADV 6575, MF510 Series, iR-ADV 4225/4235, D570, MF7400 Series, LBP7680C/5280,
   MF230 Series, iR3225, iR4530, iR-ADV C3525/3530, iR-ADV 6075, iR-ADV C350,
   iR-ADV C5550/5560, iR-ADV C475 III, LBP225, MF741C/743C, iR-ADV 4545/4551 III,
   LBP223, iR-ADV 715 III, iR-ADV C3520 III, LBP226, iR-ADV 4525/4535 III, LBP664C,
   iR-ADV 8505 III, iR-ADV C256/356 III, MF440 Series, iR-ADV 8585/8595 III, iR-ADV 615,
   iR-ADV 6575 III, LBP228, iR-ADV C7580/7570 III, iR1643i, iR1643P, LBP621C,
   iR-ADV 525 III, iPR C710/810/910, LBP852C, iR-ADV C3525/3530 III, iR-ADV 525,
   LBP222, MF641C, D1600 Series, WG7000Z Series, iR-ADV 6555/6565 III, iR-ADV 715,
   LBP663C, iR-ADV C5535/5540 III, MF742C/744C, iR-ADV 615 III
Plus d'informations : https://launchpad.net/~thierry-f/+archive/ubuntu/fork-michael-gruz
Ajout du dépôt.
Adding deb entry to /etc/apt/sources.list.d/thierry-f-ubuntu-fork-michael-gruz-jammy.list
Adding disabled deb-src entry to /etc/apt/sources.list.d/thierry-f-ubuntu-fork-michael-gruz-jammy.list
Adding key to /etc/apt/trusted.gpg.d/thierry-f-ubuntu-fork-michael-gruz.gpg with fingerprint E85CCE014112132659E6F35D3BA6E6CCE411CFCF
Réception de :1 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Atteint :2 http://fr.archive.ubuntu.com/ubuntu jammy InRelease                 
Atteint :3 http://fr.archive.ubuntu.com/ubuntu jammy-updates InRelease         
Atteint :4 http://fr.archive.ubuntu.com/ubuntu jammy-backports InRelease       
Réception de :5 https://ppa.launchpadcontent.net/thierry-f/fork-michael-gruz/ubuntu jammy InRelease [24,4 kB]
Réception de :6 https://ppa.launchpadcontent.net/thierry-f/fork-michael-gruz/ubuntu jammy/main amd64 Packages [12,9 kB]
Réception de :7 https://ppa.launchpadcontent.net/thierry-f/fork-michael-gruz/ubuntu jammy/main Translation-en [2580 B]
150 ko réceptionnés en 11s (13,7 ko/s)                      
Lecture des listes de paquets... Fait
rauner@rauner-OptiPlex-3010:~$

panteraps36 · Le 07/05/2023, à 23:21

j'ai installé 22.4 sur l'ordi de ma compagne cet après midi avec la même clé bootable
elle a une imprimante Canon Pixma TS 3151 qui s'est installée toute seule
bizarrement sous 16.4 ma MG s'était installée seule et c'est la TS qui avait posé problème !!

xubu1957 · Le 07/05/2023, à 23:26

Pourtant, elle fonctionnait l'an dernier, dans cet exemple [Résolu]Canon MG 2550 ne se lance pas après passage à Ubuntu 22.04 LTS

Dernière modification par xubu1957 (Le 08/05/2023, à 10:28)

panteraps36 · Le 08/05/2023, à 12:13

bon il y a du progrès
j'ai tout enlevé et rechargé en suivant l'exemple ci dessus
résultat :j'arrive à imprimer les documents odt par contre rien à faire pour tout ce qui est pdf ou jpg ??
j'avoue n'y rien comprendre
(je laisse cela sous ce sujet ou c'est un nouveau?)

panteraps36 · Le 08/05/2023, à 12:20

je précise que Canon a certains modèles ne prenant pas jpg
mais pdf c'est bizarre
de plus sous 16.4 elle prenait tout jpg photo odt pdf

xubu1957 · Le 08/05/2023, à 12:29

Bonjour,

Dans le tutoriel épinglé, sylvain3800 a écrit :

B.2 ) Les infos a donner quel que soit la marque de l'imprimante
il suffit de copier/coller ces commandes :
dpkg -l | grep cups
lpstat -t
/usr/sbin/lpinfo -v
cat /var/log/cups/error_log
dpkg -l | grep -v ^ii

Lien fourni au #4.

panteraps36 · Le 08/05/2023, à 20:51

rauner@rauner-OptiPlex-3010:~$ dpkg -l | grep cups
ii  bluez-cups                            5.64-0ubuntu1                           amd64        Bluetooth printer driver for CUPS
ii  cups                                  2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
ii  cups-browsed                          1.28.15-0ubuntu1                        amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                              2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                           2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                           2.4.1op1-1ubuntu4.1                     all          Common UNIX Printing System(tm) - common files
ii  cups-core-drivers                     2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - driverless printing
ii  cups-daemon                           2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - daemon
ii  cups-filters                          1.28.15-0ubuntu1                        amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-filters-core-drivers             1.28.15-0ubuntu1                        amd64        OpenPrinting CUPS Filters - Driverless printing
ii  cups-ipp-utils                        2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - IPP developer/admin utilities
ii  cups-pk-helper                        0.2.6-1ubuntu5                          amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                             2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  cups-server-common                    2.4.1op1-1ubuntu4.1                     all          Common UNIX Printing System(tm) - server common files
ii  libcups2:amd64                        2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - Core library
ii  libcupsfilters1:amd64                 1.28.15-0ubuntu1                        amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                   2.4.1op1-1ubuntu4.1                     amd64        Common UNIX Printing System(tm) - Raster image library
ii  printer-driver-hpcups                 3.21.12+dfsg0-1                         amd64        HP Linux Printing and Imaging - CUPS Raster driver (hpcups)
ii  python3-cups:amd64                    2.0.1-5build1                           amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                   1.5.16-0ubuntu3                         all          Python utility modules around the CUPS printing system
rauner@rauner-OptiPlex-3010:~$

panteraps36 · Le 08/05/2023, à 20:52

r

auner@rauner-OptiPlex-3010:~$ lpstat -t
scheduler is running
no system default destination
matériel pour Canon_MG2500_series : usb://Canon/MG2500%20series?serial=FB1015&interface=1
Canon_MG2500_series accepte des requêtes depuis lun. 08 mai 2023 11:52:01
printer Canon_MG2500_series is idle.  enabled since lun. 08 mai 2023 11:52:01
rauner@rauner-OptiPlex-3010:~$

panteraps36 · Le 08/05/2023, à 20:54

rauner@rauner-OptiPlex-3010:~$ /usr/sbin/lpinfo -v
file cups-brf:/
network ipp
network https
network http
network ipps
network lpd
network beh
network socket
serial serial:/dev/ttyS0?baud=115200
direct hp
direct hpfax
rauner@rauner-OptiPlex-3010:~$

panteraps36 · Le 08/05/2023, à 20:59

cation/ipp", auth_type=0
D [08/May/2023:20:30:14 +0200] [Client 2] con->http=0x55b67f88be80
D [08/May/2023:20:30:14 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1310, response=0x55b67f87acb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:30:14 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:30:14 +0200] [Client 2] bytes=0, http_state=0, data_remaining=1310
D [08/May/2023:20:30:14 +0200] [Client 2] Flushing write buffer.
D [08/May/2023:20:30:14 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [08/May/2023:20:30:14 +0200] [Client 2] Waiting for request.
D [08/May/2023:20:30:14 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [08/May/2023:20:30:14 +0200] [Client 1] POST /printers/Canon_MG2500_series HTTP/1.1
D [08/May/2023:20:30:14 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [08/May/2023:20:30:14 +0200] [Client 1] Read: status=200, state=6
D [08/May/2023:20:30:14 +0200] [Client 1] No authentication data provided.
D [08/May/2023:20:30:14 +0200] [Client 1] 2.0 Get-Printer-Attributes 4
D [08/May/2023:20:30:14 +0200] Get-Printer-Attributes ipp://localhost/printers/Canon_MG2500_series
D [08/May/2023:20:30:14 +0200] [Client 1] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Canon_MG2500_series) from localhost.
D [08/May/2023:20:30:14 +0200] [Client 1] Content-Length: 138
D [08/May/2023:20:30:14 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:30:14 +0200] [Client 1] con->http=0x55b67f880cc0
D [08/May/2023:20:30:14 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=138, response=0x55b67f897750(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:30:14 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:30:14 +0200] [Client 1] bytes=0, http_state=0, data_remaining=138
D [08/May/2023:20:30:14 +0200] [Client 1] Flushing write buffer.
D [08/May/2023:20:30:14 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [08/May/2023:20:30:14 +0200] [Client 1] Waiting for request.
D [08/May/2023:20:30:14 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [08/May/2023:20:30:14 +0200] [Client 1] POST / HTTP/1.1
D [08/May/2023:20:30:14 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [08/May/2023:20:30:14 +0200] [Client 1] Read: status=200, state=6
D [08/May/2023:20:30:14 +0200] [Client 1] No authentication data provided.
D [08/May/2023:20:30:14 +0200] [Client 1] 2.0 CUPS-Get-Default 5
D [08/May/2023:20:30:14 +0200] CUPS-Get-Default
D [08/May/2023:20:30:14 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [08/May/2023:20:30:14 +0200] [Client 1] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [08/May/2023:20:30:14 +0200] [Client 1] Content-Length: 124
D [08/May/2023:20:30:14 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:30:14 +0200] [Client 1] con->http=0x55b67f880cc0
D [08/May/2023:20:30:14 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x55b67f87acb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:30:14 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:30:14 +0200] [Client 1] bytes=0, http_state=0, data_remaining=124
D [08/May/2023:20:30:14 +0200] [Client 1] Flushing write buffer.
D [08/May/2023:20:30:14 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [08/May/2023:20:30:14 +0200] [Client 1] Waiting for request.
D [08/May/2023:20:30:14 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [08/May/2023:20:30:14 +0200] [Client 1] POST / HTTP/1.1
D [08/May/2023:20:30:14 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [08/May/2023:20:30:14 +0200] [Client 1] Read: status=200, state=6
D [08/May/2023:20:30:14 +0200] [Client 1] No authentication data provided.
D [08/May/2023:20:30:14 +0200] [Client 1] 2.0 Create-Printer-Subscriptions 6
D [08/May/2023:20:30:14 +0200] Create-Printer-Subscriptions /
D [08/May/2023:20:30:14 +0200] create_subscriptions(con=0x55b67f875f40(1), uri="/")
D [08/May/2023:20:30:14 +0200] recipient="dbus://"
D [08/May/2023:20:30:14 +0200] notify-lease-duration=86400
D [08/May/2023:20:30:14 +0200] notify-time-interval=0
D [08/May/2023:20:30:14 +0200] cupsdAddSubscription(mask=1fffff, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [08/May/2023:20:30:14 +0200] Added subscription #64 for server.
D [08/May/2023:20:30:14 +0200] cupsdMarkDirty(----S)
D [08/May/2023:20:30:14 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [08/May/2023:20:30:14 +0200] [Client 1] Returning IPP successful-ok for Create-Printer-Subscriptions (/) from localhost.
D [08/May/2023:20:30:14 +0200] [Client 1] Content-Length: 107
D [08/May/2023:20:30:14 +0200] [Client 1] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:30:14 +0200] [Client 1] con->http=0x55b67f880cc0
D [08/May/2023:20:30:14 +0200] [Client 1] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=107, response=0x55b67f897750(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:30:14 +0200] [Client 1] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:30:14 +0200] [Client 1] bytes=0, http_state=0, data_remaining=107
D [08/May/2023:20:30:14 +0200] [Client 1] Flushing write buffer.
D [08/May/2023:20:30:14 +0200] [Client 1] New state is HTTP_STATE_WAITING
D [08/May/2023:20:30:14 +0200] [Client 1] Waiting for request.
D [08/May/2023:20:30:14 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [08/May/2023:20:30:15 +0200] Expiring subscriptions...
I [08/May/2023:20:30:34 +0200] Saving subscriptions.conf...
D [08/May/2023:20:30:34 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [08/May/2023:20:30:34 +0200] Expiring subscriptions...
I [08/May/2023:20:45:15 +0200] Expiring subscriptions...
D [08/May/2023:20:45:15 +0200] cupsdAddCert: Adding certificate for PID 0
D [08/May/2023:20:45:15 +0200] Closing client 1 after 900 seconds of inactivity.
D [08/May/2023:20:45:15 +0200] [Client 1] Closing connection.
D [08/May/2023:20:45:15 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [08/May/2023:20:45:15 +0200] Closing client 2 after 900 seconds of inactivity.
D [08/May/2023:20:45:15 +0200] [Client 2] Closing connection.
D [08/May/2023:20:45:15 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [08/May/2023:20:45:15 +0200] Report: clients=0
D [08/May/2023:20:45:15 +0200] Report: jobs=7
D [08/May/2023:20:45:15 +0200] Report: jobs-active=0
D [08/May/2023:20:45:15 +0200] Report: printers=1
D [08/May/2023:20:45:15 +0200] Report: stringpool-string-count=692
D [08/May/2023:20:45:15 +0200] Report: stringpool-alloc-bytes=9104
D [08/May/2023:20:45:15 +0200] Report: stringpool-total-bytes=12824
D [08/May/2023:20:47:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:47:45 +0200] [Client 3] Server address is "/run/cups/cups.sock".
D [08/May/2023:20:47:45 +0200] [Client 3] Accepted from localhost (Domain)
D [08/May/2023:20:47:45 +0200] [Client 3] Waiting for request.
I [08/May/2023:20:47:45 +0200] Expiring subscriptions...
D [08/May/2023:20:47:45 +0200] Report: clients=1
D [08/May/2023:20:47:45 +0200] Report: jobs=7
D [08/May/2023:20:47:45 +0200] Report: jobs-active=0
D [08/May/2023:20:47:45 +0200] Report: printers=1
D [08/May/2023:20:47:45 +0200] Report: stringpool-string-count=692
D [08/May/2023:20:47:45 +0200] Report: stringpool-alloc-bytes=9104
D [08/May/2023:20:47:45 +0200] Report: stringpool-total-bytes=12824
D [08/May/2023:20:47:45 +0200] [Client 3] POST / HTTP/1.1
D [08/May/2023:20:47:45 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [08/May/2023:20:47:45 +0200] [Client 3] Read: status=200, state=6
D [08/May/2023:20:47:45 +0200] [Client 3] No authentication data provided.
D [08/May/2023:20:47:45 +0200] [Client 3] 2.0 Get-Jobs 1
D [08/May/2023:20:47:45 +0200] Get-Jobs ipp://localhost/printers/
D [08/May/2023:20:47:45 +0200] [Client 3] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost.
D [08/May/2023:20:47:45 +0200] [Client 3] Content-Length: 75
D [08/May/2023:20:47:45 +0200] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:47:45 +0200] [Client 3] con->http=0x55b67f880cc0
D [08/May/2023:20:47:45 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55b67f8142c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:47:45 +0200] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:47:45 +0200] [Client 3] bytes=0, http_state=0, data_remaining=75
D [08/May/2023:20:47:45 +0200] [Client 3] Flushing write buffer.
D [08/May/2023:20:47:45 +0200] [Client 3] New state is HTTP_STATE_WAITING
D [08/May/2023:20:47:45 +0200] [Client 3] Waiting for request.
D [08/May/2023:20:47:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:47:45 +0200] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [08/May/2023:20:47:45 +0200] [Client 3] Closing connection.
D [08/May/2023:20:47:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [08/May/2023:20:47:46 +0200] Expiring subscriptions...
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:51:58 +0200] [Client 4] Server address is "/run/cups/cups.sock".
D [08/May/2023:20:51:58 +0200] [Client 4] Accepted from localhost (Domain)
D [08/May/2023:20:51:58 +0200] [Client 4] Waiting for request.
I [08/May/2023:20:51:58 +0200] Expiring subscriptions...
D [08/May/2023:20:51:58 +0200] cupsdAddCert: Adding certificate for PID 0
D [08/May/2023:20:51:58 +0200] Report: clients=1
D [08/May/2023:20:51:58 +0200] Report: jobs=7
D [08/May/2023:20:51:58 +0200] Report: jobs-active=0
D [08/May/2023:20:51:58 +0200] Report: printers=1
D [08/May/2023:20:51:58 +0200] Report: stringpool-string-count=692
D [08/May/2023:20:51:58 +0200] Report: stringpool-alloc-bytes=9104
D [08/May/2023:20:51:58 +0200] Report: stringpool-total-bytes=12824
D [08/May/2023:20:51:58 +0200] [Client 4] POST / HTTP/1.1
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [08/May/2023:20:51:58 +0200] [Client 4] Read: status=200, state=6
D [08/May/2023:20:51:58 +0200] [Client 4] No authentication data provided.
D [08/May/2023:20:51:58 +0200] [Client 4] 2.0 CUPS-Get-Default 1
D [08/May/2023:20:51:58 +0200] CUPS-Get-Default
D [08/May/2023:20:51:58 +0200] CUPS-Get-Default client-error-not-found: Aucune imprimante par défaut.
D [08/May/2023:20:51:58 +0200] [Client 4] Returning IPP client-error-not-found for CUPS-Get-Default (no URI) from localhost.
D [08/May/2023:20:51:58 +0200] [Client 4] Content-Length: 124
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:51:58 +0200] [Client 4] con->http=0x55b67f880cc0
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=124, response=0x55b67f878c40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:51:58 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:51:58 +0200] [Client 4] bytes=0, http_state=0, data_remaining=124
D [08/May/2023:20:51:58 +0200] [Client 4] Flushing write buffer.
D [08/May/2023:20:51:58 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [08/May/2023:20:51:58 +0200] [Client 4] Waiting for request.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:51:58 +0200] [Client 4] POST / HTTP/1.1
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:51:58 +0200] [Client 4] Read: status=200, state=6
D [08/May/2023:20:51:58 +0200] [Client 4] No authentication data provided.
D [08/May/2023:20:51:58 +0200] [Client 4] 2.0 CUPS-Get-Printers 2
D [08/May/2023:20:51:58 +0200] CUPS-Get-Printers
D [08/May/2023:20:51:58 +0200] [Client 4] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [08/May/2023:20:51:58 +0200] [Client 4] Content-Length: 1310
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:51:58 +0200] [Client 4] con->http=0x55b67f880cc0
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1310, response=0x55b67f88b6e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:51:58 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:51:58 +0200] [Client 4] bytes=0, http_state=0, data_remaining=1310
D [08/May/2023:20:51:58 +0200] [Client 4] Flushing write buffer.
D [08/May/2023:20:51:58 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [08/May/2023:20:51:58 +0200] [Client 4] Waiting for request.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:51:58 +0200] [Client 5] Server address is "/run/cups/cups.sock".
D [08/May/2023:20:51:58 +0200] [Client 5] Accepted from localhost (Domain)
D [08/May/2023:20:51:58 +0200] [Client 5] Waiting for request.
D [08/May/2023:20:51:58 +0200] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [08/May/2023:20:51:58 +0200] [Client 5] Closing connection.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:51:58 +0200] [Client 4] POST / HTTP/1.1
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:51:58 +0200] [Client 4] Read: status=200, state=6
D [08/May/2023:20:51:58 +0200] [Client 4] No authentication data provided.
D [08/May/2023:20:51:58 +0200] [Client 4] 2.0 CUPS-Get-Classes 3
D [08/May/2023:20:51:58 +0200] CUPS-Get-Classes
D [08/May/2023:20:51:58 +0200] [Client 4] Returning IPP successful-ok for CUPS-Get-Classes (no URI) from localhost.
D [08/May/2023:20:51:58 +0200] [Client 4] Content-Length: 75
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:51:58 +0200] [Client 4] con->http=0x55b67f880cc0
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55b67f877360(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:51:58 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:51:58 +0200] [Client 4] bytes=0, http_state=0, data_remaining=75
D [08/May/2023:20:51:58 +0200] [Client 4] Flushing write buffer.
D [08/May/2023:20:51:58 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [08/May/2023:20:51:58 +0200] [Client 4] Waiting for request.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:51:58 +0200] [Client 4] POST / HTTP/1.1
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:51:58 +0200] [Client 4] Read: status=200, state=6
D [08/May/2023:20:51:58 +0200] [Client 4] No authentication data provided.
D [08/May/2023:20:51:58 +0200] [Client 4] 2.0 CUPS-Get-Printers 4
D [08/May/2023:20:51:58 +0200] CUPS-Get-Printers
D [08/May/2023:20:51:58 +0200] [Client 4] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [08/May/2023:20:51:58 +0200] [Client 4] Content-Length: 250
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:51:58 +0200] [Client 4] con->http=0x55b67f880cc0
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=250, response=0x55b67f88b6e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:51:58 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:51:58 +0200] [Client 4] bytes=0, http_state=0, data_remaining=250
D [08/May/2023:20:51:58 +0200] [Client 4] Flushing write buffer.
D [08/May/2023:20:51:58 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [08/May/2023:20:51:58 +0200] [Client 4] Waiting for request.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:51:58 +0200] [Client 4] POST / HTTP/1.1
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:51:58 +0200] [Client 4] Read: status=200, state=6
D [08/May/2023:20:51:58 +0200] [Client 4] No authentication data provided.
D [08/May/2023:20:51:58 +0200] [Client 4] 2.0 CUPS-Get-Printers 5
D [08/May/2023:20:51:58 +0200] CUPS-Get-Printers
D [08/May/2023:20:51:58 +0200] [Client 4] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [08/May/2023:20:51:58 +0200] [Client 4] Content-Length: 203
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:51:58 +0200] [Client 4] con->http=0x55b67f880cc0
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=203, response=0x55b67f87d600(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:51:58 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:51:58 +0200] [Client 4] bytes=0, http_state=0, data_remaining=203
D [08/May/2023:20:51:58 +0200] [Client 4] Flushing write buffer.
D [08/May/2023:20:51:58 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [08/May/2023:20:51:58 +0200] [Client 4] Waiting for request.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:51:58 +0200] [Client 4] POST / HTTP/1.1
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:51:58 +0200] [Client 4] Read: status=200, state=6
D [08/May/2023:20:51:58 +0200] [Client 4] No authentication data provided.
D [08/May/2023:20:51:58 +0200] [Client 4] 2.0 CUPS-Get-Printers 6
D [08/May/2023:20:51:58 +0200] CUPS-Get-Printers
D [08/May/2023:20:51:58 +0200] [Client 4] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [08/May/2023:20:51:58 +0200] [Client 4] Content-Length: 427
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:51:58 +0200] [Client 4] con->http=0x55b67f880cc0
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=427, response=0x55b67f88b6e0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:51:58 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:51:58 +0200] [Client 4] bytes=0, http_state=0, data_remaining=427
D [08/May/2023:20:51:58 +0200] [Client 4] Flushing write buffer.
D [08/May/2023:20:51:58 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [08/May/2023:20:51:58 +0200] [Client 4] Waiting for request.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:51:58 +0200] [Client 4] POST / HTTP/1.1
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:51:58 +0200] [Client 4] Read: status=200, state=6
D [08/May/2023:20:51:58 +0200] [Client 4] No authentication data provided.
D [08/May/2023:20:51:58 +0200] [Client 4] 2.0 Get-Jobs 7
D [08/May/2023:20:51:58 +0200] Get-Jobs ipp://localhost/
D [08/May/2023:20:51:58 +0200] [Client 4] Returning IPP successful-ok for Get-Jobs (ipp://localhost/) from localhost.
D [08/May/2023:20:51:58 +0200] [Client 4] Content-Length: 75
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [08/May/2023:20:51:58 +0200] [Client 4] con->http=0x55b67f880cc0
D [08/May/2023:20:51:58 +0200] [Client 4] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x55b67f87d600(IPP_STATE_DATA), pipe_pid=0, file=-1
D [08/May/2023:20:51:58 +0200] [Client 4] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [08/May/2023:20:51:58 +0200] [Client 4] bytes=0, http_state=0, data_remaining=75
D [08/May/2023:20:51:58 +0200] [Client 4] Flushing write buffer.
D [08/May/2023:20:51:58 +0200] [Client 4] New state is HTTP_STATE_WAITING
D [08/May/2023:20:51:58 +0200] [Client 4] Waiting for request.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:51:58 +0200] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [08/May/2023:20:51:58 +0200] [Client 4] Closing connection.
D [08/May/2023:20:51:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [08/May/2023:20:51:59 +0200] Expiring subscriptions...
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:53:40 +0200] [Client 6] Server address is "/run/cups/cups.sock".
D [08/May/2023:20:53:40 +0200] [Client 6] Accepted from localhost (Domain)
D [08/May/2023:20:53:40 +0200] [Client 6] Waiting for request.
I [08/May/2023:20:53:40 +0200] Expiring subscriptions...
D [08/May/2023:20:53:40 +0200] Report: clients=1
D [08/May/2023:20:53:40 +0200] Report: jobs=7
D [08/May/2023:20:53:40 +0200] Report: jobs-active=0
D [08/May/2023:20:53:40 +0200] Report: printers=1
D [08/May/2023:20:53:40 +0200] Report: stringpool-string-count=692
D [08/May/2023:20:53:40 +0200] Report: stringpool-alloc-bytes=9104
D [08/May/2023:20:53:40 +0200] Report: stringpool-total-bytes=12824
D [08/May/2023:20:53:40 +0200] [Client 6] POST / HTTP/1.1
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [08/May/2023:20:53:40 +0200] [Client 6] Read: status=200, state=6
D [08/May/2023:20:53:40 +0200] [Client 6] No authentication data provided.
D [08/May/2023:20:53:40 +0200] [Client 6] 2.0 CUPS-Get-Devices 1
D [08/May/2023:20:53:40 +0200] CUPS-Get-Devices
D [08/May/2023:20:53:40 +0200] cupsdIsAuthorized: username=""
D [08/May/2023:20:53:40 +0200] [Client 6] Returning HTTP Non autorisé for CUPS-Get-Devices (no URI) from localhost
D [08/May/2023:20:53:40 +0200] [Client 6] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [08/May/2023:20:53:40 +0200] [Client 6] WWW-Authenticate: Basic realm=\"CUPS\", PeerCred, Local trc=\"y\"
D [08/May/2023:20:53:40 +0200] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [08/May/2023:20:53:40 +0200] [Client 6] Closing connection.
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:53:40 +0200] [Client 7] Server address is "/run/cups/cups.sock".
D [08/May/2023:20:53:40 +0200] [Client 7] Accepted from localhost (Domain)
D [08/May/2023:20:53:40 +0200] [Client 7] Waiting for request.
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [08/May/2023:20:53:40 +0200] [Client 8] Server address is "/run/cups/cups.sock".
D [08/May/2023:20:53:40 +0200] [Client 8] Accepted from localhost (Domain)
D [08/May/2023:20:53:40 +0200] [Client 8] Waiting for request.
D [08/May/2023:20:53:40 +0200] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [08/May/2023:20:53:40 +0200] [Client 7] Closing connection.
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:53:40 +0200] [Client 9] Server address is "/run/cups/cups.sock".
D [08/May/2023:20:53:40 +0200] [Client 9] Accepted from localhost (Domain)
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for request.
D [08/May/2023:20:53:40 +0200] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [08/May/2023:20:53:40 +0200] [Client 8] Closing connection.
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:53:40 +0200] [Client 9] POST / HTTP/1.1
D [08/May/2023:20:53:40 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [08/May/2023:20:53:40 +0200] [Client 9] Read: status=200, state=6
D [08/May/2023:20:53:40 +0200] [Client 9] Authorized as rauner using PeerCred.
D [08/May/2023:20:53:40 +0200] [Client 9] 2.0 CUPS-Get-Devices 1
D [08/May/2023:20:53:40 +0200] CUPS-Get-Devices
D [08/May/2023:20:53:40 +0200] cupsdIsAuthorized: username="rauner"
D [08/May/2023:20:53:40 +0200] [Client 9] AppArmor profile is 'unconfined'.
D [08/May/2023:20:53:40 +0200] [Client 9] Not a snap - allowed.
D [08/May/2023:20:53:40 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [08/May/2023:20:53:40 +0200] [CGI] argv[1] = "1"
D [08/May/2023:20:53:40 +0200] [CGI] argv[2] = "0"
D [08/May/2023:20:53:40 +0200] [CGI] argv[3] = "15"
D [08/May/2023:20:53:40 +0200] [CGI] argv[4] = "7"
D [08/May/2023:20:53:40 +0200] [CGI] argv[5] = "requested-attributes=all"
D [08/May/2023:20:53:40 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [08/May/2023:20:53:40 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [08/May/2023:20:53:40 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc-root"
D [08/May/2023:20:53:40 +0200] [CGI] envp[3] = "CUPS_REQUESTROOT=/var/spool/cups"
D [08/May/2023:20:53:40 +0200] [CGI] envp[4] = "CUPS_SERVERBIN=/usr/lib/cups"
D [08/May/2023:20:53:40 +0200] [CGI] envp[5] = "CUPS_SERVERROOT=/etc/cups"
D [08/May/2023:20:53:40 +0200] [CGI] envp[6] = "CUPS_STATEDIR=/run/cups"
D [08/May/2023:20:53:40 +0200] [CGI] envp[7] = "HOME=/var/spool/cups/tmp"
D [08/May/2023:20:53:40 +0200] [CGI] envp[8] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [08/May/2023:20:53:40 +0200] [CGI] envp[9] = "SERVER_ADMIN=root@rauner-OptiPlex-3010"
D [08/May/2023:20:53:40 +0200] [CGI] envp[10] = "SOFTWARE=CUPS/2.4.1"
D [08/May/2023:20:53:40 +0200] [CGI] envp[11] = "TMPDIR=/var/spool/cups/tmp"
D [08/May/2023:20:53:40 +0200] [CGI] envp[12] = "USER=root"
D [08/May/2023:20:53:40 +0200] [CGI] envp[13] = "CUPS_MAX_MESSAGE=2047"
D [08/May/2023:20:53:40 +0200] [CGI] envp[14] = "CUPS_SERVER=/run/cups/cups.sock"
D [08/May/2023:20:53:40 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [08/May/2023:20:53:40 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [08/May/2023:20:53:40 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [08/May/2023:20:53:40 +0200] [CGI] envp[18] = "LANG=fr_FR.UTF8"
D [08/May/2023:20:53:40 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [08/May/2023:20:53:40 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [08/May/2023:20:53:40 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [08/May/2023:20:53:40 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [08/May/2023:20:53:40 +0200] [CGI] envp[23] = "REMOTE_ADDR=localhost"
D [08/May/2023:20:53:40 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [08/May/2023:20:53:40 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
D [08/May/2023:20:53:40 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc-root/"
D [08/May/2023:20:53:40 +0200] [CGI] envp[27] = "REMOTE_USER=rauner"
D [08/May/2023:20:53:40 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [08/May/2023:20:53:40 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/2.4.1 (Linux 5.19.0-41-generic; x86_64) IPP/2.0"
D [08/May/2023:20:53:40 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [08/May/2023:20:53:40 +0200] [CGI] envp[31] = "CONTENT_LENGTH=75"
D [08/May/2023:20:53:40 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [08/May/2023:20:53:40 +0200] cupsdAddCert: Adding certificate for PID 2042
D [08/May/2023:20:53:40 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 2042)
I [08/May/2023:20:53:40 +0200] [Client 9] Started "/usr/lib/cups/daemon/cups-deviced" (pid=2042, file=23)
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-brf (PID 2043)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/implicitclass (PID 2044)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 2045)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 2046)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless-fax (PID 2047)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hpfax (PID 2048)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/driverless (PID 2049)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 2050)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/hp (PID 2051)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 2052)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 2053)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/gutenprint53+usb (PID 2054)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 2055)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/https (PID 2056)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 2057)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 2058)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cnijnet (PID 2059)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 2060)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 2061)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cnijbe (PID 2062)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cnijusb (PID 2063)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 2064)
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 2065)
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 2066)
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"cups-brf:/\"...
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"ipp\"...
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2043 (cups-brf) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2044 (implicitclass) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2045 (ipp) exited with no errors.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=2147483647, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] Script header: Content-Type: application/ipp
D [08/May/2023:20:53:40 +0200] [Client 9] Script header: 
D [08/May/2023:20:53:40 +0200] [Client 9] Sending status 200 for CGI.
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdSendHeader: code=200, type="(null)", auth_type=0
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [CGI] Started ippfind (PID 2068)
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"https\"...
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"http\"...
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2053 (http) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2056 (https) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2047 (driverless-fax) exited with no errors.
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"ipps\"...
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2050 (ipps) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2063 (cnijusb) exited with no errors.
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"lpd\"...
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2052 (lpd) exited with no errors.
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"beh\"...
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2058 (beh) exited with no errors.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"socket\"...
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2065 (socket) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2055 (parallel) exited with no errors.
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"serial:/dev/ttyS0?baud=115200\"...
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2060 (serial) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2062 (cnijbe) exited with no errors.
D [08/May/2023:20:53:40 +0200] [CGI] Loading USB quirks from \"/usr/share/cups/usb\".
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2064 (bluetooth) exited with no errors.
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"hp\"...
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2051 (hp) exited with no errors.
D [08/May/2023:20:53:40 +0200] [CGI] Multi-Call Dye-sublimation CUPS Backend version 0.94G
D [08/May/2023:20:53:40 +0200] [CGI] Copyright 2007-2019 Solomon Peachy
D [08/May/2023:20:53:40 +0200] [CGI] This free software comes with ABSOLUTELY NO WARRANTY! 
D [08/May/2023:20:53:40 +0200] [CGI] Licensed under the GNU GPL.  Run with \'-G\' for more details.
D [08/May/2023:20:53:40 +0200] [CGI] 
D [08/May/2023:20:53:40 +0200] [CGI] Environment variables:
D [08/May/2023:20:53:40 +0200] [CGI] DYESUB_DEBUG EXTRA_PID EXTRA_VID EXTRA_TYPE BACKEND SERIAL OLD_URI_SCHEME BACKEND_QUIET
D [08/May/2023:20:53:40 +0200] [CGI] CUPS Usage:
D [08/May/2023:20:53:40 +0200] [CGI] DEVICE_URI=someuri gutenprint53+usb job user title num-copies options [ filename ]
D [08/May/2023:20:53:40 +0200] [CGI] 
D [08/May/2023:20:53:40 +0200] [CGI] Standalone Usage:
D [08/May/2023:20:53:40 +0200] [CGI] gutenprint53+usb
D [08/May/2023:20:53:40 +0200] [ -D ] [ -G ] [ -f ] [ -v ]
D [08/May/2023:20:53:40 +0200] [ backend_specific_args ] 
D [08/May/2023:20:53:40 +0200] [ -d copies ] 
D [08/May/2023:20:53:40 +0200] [ - | infile ] 
D [08/May/2023:20:53:40 +0200] [CGI] # Canon SELPHY CP/ES (legacy) version 0.104
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=canonselphy canon-cp10 canon-cp100 canon-cp200 canon-cp220 canon-cp300 canon-cp330 canon-cp400 canon-cp500 canon-cp510 canon-cp520 canon-cp530 canon-cp600 canon-cp710 canon-cp720 canon-cp730 canon-cp740 canon-cp750 canon-cp760 canon-cp770 canon-cp780 canon-cp790 canon-cp800 canon-cp810 canon-cp900 canon-es1 canon-es2 canon-es20 canon-es3 canon-es30 canon-es40 selphycp10 selphycp100 selphycp200 selphycp220 selphycp300 selphycp330 selphycp400 selphycp500 selphycp510 selphycp520 selphycp530 selphycp600 selphycp710 selphycp720 selphycp730 selphycp740 selphycp750 selphycp760 selphycp770 selphycp780 selphycp790 selphycp800 selphycp810 selphycp900 selphyes1 selphyes2 selphyes20 selphyes3 selphyes30 selphyes40 
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query printer status
D [08/May/2023:20:53:40 +0200] [CGI] # Canon SELPHY CP (new) version 0.20
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=canonselphyneo canon-cp820 canon-cp910 canon-cp1000 canon-cp1200 canon-cp1300 selphycp820 selphycp910 selphycp1000 selphycp1200 selphycp1300 
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query printer status
D [08/May/2023:20:53:40 +0200] [CGI] # Kodak 6800/6850 version 0.73 (lib 0.08)
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=kodak68x0 kodak-6800 kodak-6850 kodak6800 kodak6850 
D [08/May/2023:20:53:40 +0200] [ -c filename ]  # Get tone curve
D [08/May/2023:20:53:40 +0200] [ -C filename ]  # Set tone curve
D [08/May/2023:20:53:40 +0200] [ -m ]           # Query media
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer
D [08/May/2023:20:53:40 +0200] [ -X jobid ]     # Cancel Job
D [08/May/2023:20:53:40 +0200] [CGI] # Kodak 605/70xx version 0.45 (lib 0.08)
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=kodak605 kodak-605 kodak-7000 kodak-7010 kodak-7015 
D [08/May/2023:20:53:40 +0200] [ -c filename ]  # Get user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -C filename ]  # Set tone curve
D [08/May/2023:20:53:40 +0200] [ -e ]           # Query error log
D [08/May/2023:20:53:40 +0200] [ -F ]           # Flash Printer LED
D [08/May/2023:20:53:40 +0200] [ -i ]           # Query printer info
D [08/May/2023:20:53:40 +0200] [ -l filename ]  # Get current tone curve
D [08/May/2023:20:53:40 +0200] [ -L filename ]  # Set current tone curve
D [08/May/2023:20:53:40 +0200] [ -m ]           # Query media
D [08/May/2023:20:53:40 +0200] [ -r ]           # Reset user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer to factory defaults
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -X jobid ]     # Cancel job
D [08/May/2023:20:53:40 +0200] [CGI] # Kodak 1400/805 version 0.40
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=kodak1400 kodak-1400 kodak-805 mitsubishi-3020d mitsubishi-3020da kodak805 mitsu3020d mitsu3020da mitsubishi-3020dae mitsubishi-3020de mitsubishi-3020du 
D [08/May/2023:20:53:40 +0200] [ -C filename ]  # Set tone curve
D [08/May/2023:20:53:40 +0200] [CGI] # Shinko/Sinfonia CHC-S1245/E1 version 0.31 (lib 0.08)
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=shinko-chcs1245 sinfonia-chcs1245 shinkos1245 
D [08/May/2023:20:53:40 +0200] [ -m ]           # Query media
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -u ]           # Query user string
D [08/May/2023:20:53:40 +0200] [ -U sometext ]  # Set user string
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer
D [08/May/2023:20:53:40 +0200] [ -X jobid ]     # Abort a printjob
D [08/May/2023:20:53:40 +0200] [ -F ]           # Tone curve refers to FINE mode
D [08/May/2023:20:53:40 +0200] [ -c filename ]  # Get user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -C filename ]  # Set user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -l filename ]  # Get current tone curve
D [08/May/2023:20:53:40 +0200] [ -L filename ]  # Set current tone curve
D [08/May/2023:20:53:40 +0200] [CGI] # Shinko/Sinfonia CHC-S2145/S2 version 0.61 (lib 0.08)
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=shinko-chcs2145 sinfonia-chcs2145 shinkos2145 
D [08/May/2023:20:53:40 +0200] [ -b 0|1 ]       # Disable/Enable control panel
D [08/May/2023:20:53:40 +0200] [ -c filename ]  # Get user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -C filename ]  # Set user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -e ]           # Query error log
D [08/May/2023:20:53:40 +0200] [ -F ]           # Flash Printer LED
D [08/May/2023:20:53:40 +0200] [ -i ]           # Query printer info
D [08/May/2023:20:53:40 +0200] [ -l filename ]  # Get current tone curve
D [08/May/2023:20:53:40 +0200] [ -L filename ]  # Set current tone curve
D [08/May/2023:20:53:40 +0200] [ -m ]           # Query media
D [08/May/2023:20:53:40 +0200] [ -r ]           # Reset user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer to factory defaults
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -u ]           # Query user string
D [08/May/2023:20:53:40 +0200] [ -U sometext ]  # Set user string
D [08/May/2023:20:53:40 +0200] [ -X jobid ]     # Abort a printjob
D [08/May/2023:20:53:40 +0200] [CGI] # Shinko/Sinfonia CHC-S6145/CS2/S2245/S3 version 0.40 (lib 0.08)
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=sinfonia-chcs6145 ciaat-brava-21 sinfonia-chcs2245 hiti-m610 shinko-chcs6145 shinkos6145 brava21 
D [08/May/2023:20:53:40 +0200] [ -c filename ]  # Get user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -C filename ]  # Set user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -e ]           # Query error log
D [08/May/2023:20:53:40 +0200] [ -F ]           # Flash Printer LED
D [08/May/2023:20:53:40 +0200] [ -i ]           # Query printer info
D [08/May/2023:20:53:40 +0200] [ -k num ]       # Set sleep time (5-240 minutes)
D [08/May/2023:20:53:40 +0200] [ -l filename ]  # Get current tone curve
D [08/May/2023:20:53:40 +0200] [ -L filename ]  # Set current tone curve
D [08/May/2023:20:53:40 +0200] [ -m ]           # Query media
D [08/May/2023:20:53:40 +0200] [ -q filename ]  # Extract eeprom data
D [08/May/2023:20:53:40 +0200] [ -Q filename ]  # Extract image correction params
D [08/May/2023:20:53:40 +0200] [ -r ]           # Reset user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer to factory defaults
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -X jobid ]     # Abort a printjob
D [08/May/2023:20:53:40 +0200] [CGI] # Sinfonia CHC-S6245 / Kodak 8810 version 0.22 (lib 0.08)
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=sinfonia-chcs6245 hiti-p910l kodak-8810 shinko-chcs6245 shinkos6245 hitip910 
D [08/May/2023:20:53:40 +0200] [ -c filename ]  # Get user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -C filename ]  # Set user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -e ]           # Query error log
D [08/May/2023:20:53:40 +0200] [ -F ]           # Flash Printer LED
D [08/May/2023:20:53:40 +0200] [ -i ]           # Query printer info
D [08/May/2023:20:53:40 +0200] [ -k num ]       # Set sleep time (5-240 minutes)
D [08/May/2023:20:53:40 +0200] [ -l filename ]  # Get current tone curve
D [08/May/2023:20:53:40 +0200] [ -L filename ]  # Set current tone curve
D [08/May/2023:20:53:40 +0200] [ -m ]           # Query media
D [08/May/2023:20:53:40 +0200] [ -r ]           # Reset user/NV tone curve
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer to factory defaults
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -X jobid ]     # Abort a printjob
D [08/May/2023:20:53:40 +0200] [CGI] # Sony UP-D version 0.37
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=sonyupd sony-updr150 sony-updr200 sony-upcr10l sony-upd895 sony-upd897 dnp-sl10 sonyupdr150 sonyupdr200 sonyupcr10 
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query printer status
D [08/May/2023:20:53:40 +0200] [CGI] # Mitsubishi CP-D70 family version 0.95
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=mitsu70x mitsubishi-d70dw mitsubishi-d80dw mitsubishi-k60dw kodak-305 fujifilm-ask-300 mitsubishi-d707dw mitsubishi-k60dws mitsud80 mitsuk60 kodak305 fujiask300 
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query printer status
D [08/May/2023:20:53:40 +0200] [ -j ]           # Query job status
D [08/May/2023:20:53:40 +0200] [ -w ]           # Wake up printer
D [08/May/2023:20:53:40 +0200] [ -W ]           # Wake up printer and wait
D [08/May/2023:20:53:40 +0200] [ -k num ]       # Set standby time (1-60 minutes, 0 disables)
D [08/May/2023:20:53:40 +0200] [ -x num ]       # Set USB iSerialNumber Reporting (1 on, 0 off)
D [08/May/2023:20:53:40 +0200] [ -X jobid ]     # Abort a printjob
D [08/May/2023:20:53:40 +0200] [CGI] # Mitsubishi CP-D90DW version 0.13
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=mitsubishi-d90dw mitsud90 
D [08/May/2023:20:53:40 +0200] [ -i ]           # Query printer info
D [08/May/2023:20:53:40 +0200] [ -j jobid ]     # Query job status
D [08/May/2023:20:53:40 +0200] [ -k time ]      # Set sleep time in minutes
D [08/May/2023:20:53:40 +0200] [ -m ]           # Query printer media
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query printer status
D [08/May/2023:20:53:40 +0200] [ -x 0|1 ]       # Enable/disable iSerial reporting
D [08/May/2023:20:53:40 +0200] [CGI] # Mitsubishi CP9xxx family version 0.47
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=mitsu9xxx mitsubishi-9000dw mitsubishi-9500dw mitsubishi-9550dw mitsubishi-9550dw-s mitsubishi-9600dw mitsubishi-9800dw mitsubishi-9800dw-s mitsubishi-9810dw mitsubishi-9550d mitsubishi-9550dz mitsubishi-9800d mitsubishi-9800dz mitsubishi-9810d mitsu9000 mitsu9500 mitsu9550 mitsu9600 mitsu9800 mitsu9810 
D [08/May/2023:20:53:40 +0200] [ -m ]           # Query media
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -X ]           # Cancel current job
D [08/May/2023:20:53:40 +0200] [CGI] # Mitsubishi P93D/P95D version 0.12
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=mitsup9x mitsubishi-p95d mitsubishi-p93d mitsup95d mitsup93d 
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [CGI] # DNP DS-series / Citizen C-series version 0.117
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=dnp_citizen dnpds40 dnp-ds40 dnp-ds80 dnp-ds80dx dnp-ds620 dnp-ds820 dnp-dsrx1 citizen-cw-01 citizen-cw-02 citizen-cx-02 dnpds80 dnpds80dx dnpds620 dnpds820 dnprx1 citizencw01 citizencw02 citizencx02 citizen-cx citizen-cx-w citizen-cy citizen-cy-02 citizen-op900 citizen-op900ii 
D [08/May/2023:20:53:40 +0200] [ -i ]           # Query printer info
D [08/May/2023:20:53:40 +0200] [ -I ]           # Query sensor  info
D [08/May/2023:20:53:40 +0200] [ -k num ]       # Set standby time (1-99 minutes, 0 disables)
D [08/May/2023:20:53:40 +0200] [ -K num ]       # Keep Media Status Across Power Cycles (1 on, 0 off)
D [08/May/2023:20:53:40 +0200] [ -n ]           # Query counters
D [08/May/2023:20:53:40 +0200] [ -N A|B|M ]     # Clear counter A/B/M
D [08/May/2023:20:53:40 +0200] [ -p num ]       # Set counter P
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -x num ]       # Set USB iSerialNumber Reporting (1 on, 0 off)
D [08/May/2023:20:53:40 +0200] [ -X ]           # Cancel current print job
D [08/May/2023:20:53:40 +0200] [CGI] # Magicard family version 0.16
D [08/May/2023:20:53:40 +0200] [CGI] BACKEND=magicard magicard-tango-2e magicard-enduro magicard-enduroplus magicard-rio-2e tango2e enduro enduroplus 
D [08/May/2023:20:53:40 +0200] [ -s ]           # Query status
D [08/May/2023:20:53:40 +0200] [ -q ]           # Query information
D [08/May/2023:20:53:40 +0200] [ -I ]           # Query printer sensors
D [08/May/2023:20:53:40 +0200] [ -E ]           # Eject card
D [08/May/2023:20:53:40 +0200] [ -T ]           # Print self-test card
D [08/May/2023:20:53:40 +0200] [ -R ]           # Reset printer
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2054 (gutenprint53+usb) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2061 (mdns) exited with no errors.
D [08/May/2023:20:53:40 +0200] [CGI] Loaded 204 quirks.
D [08/May/2023:20:53:40 +0200] [CGI] list_devices
D [08/May/2023:20:53:40 +0200] [CGI] libusb_get_device_list=7
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2066 (usb) exited with no errors.
D [08/May/2023:20:53:40 +0200] [CGI] \033[31;01merror: Failed to create /var/spool/cups/tmp/.hplip\033[0m
D [08/May/2023:20:53:40 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:40 +0200] [CGI] Flushed attributes...
D [08/May/2023:20:53:40 +0200] [cups-deviced] Found device \"hpfax\"...
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:40 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:40 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:40 +0200] [CGI] sent=0, count=0
D [08/May/2023:20:53:40 +0200] [CGI] ippfind (PID 2068) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2049 (driverless) exited with no errors.
D [08/May/2023:20:53:40 +0200] [cups-deviced] PID 2048 (hpfax) exited with no errors.
D [08/May/2023:20:53:41 +0200] [CGI] sent=0, count=0
I [08/May/2023:20:53:41 +0200] Expiring subscriptions...
D [08/May/2023:20:53:42 +0200] [cups-deviced] PID 2046 (snmp) exited with no errors.
I [08/May/2023:20:53:42 +0200] Expiring subscriptions...
D [08/May/2023:20:53:42 +0200] [CGI] sent=0, count=0
D [08/May/2023:20:53:42 +0200] [cups-deviced] PID 2057 (dnssd) exited with no errors.
I [08/May/2023:20:53:43 +0200] Expiring subscriptions...
D [08/May/2023:20:53:45 +0200] [cups-deviced] PID 2059 (cnijnet) exited with no errors.
D [08/May/2023:20:53:45 +0200] [Client 9] CGI data ready to be sent.
I [08/May/2023:20:53:45 +0200] Expiring subscriptions...
D [08/May/2023:20:53:45 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:45 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:45 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:45 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:45 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:45 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:45 +0200] [Client 9] CGI data ready to be sent.
D [08/May/2023:20:53:45 +0200] PID 2042 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [08/May/2023:20:53:45 +0200] [Client 9] con->http=0x55b67f880cc0
D [08/May/2023:20:53:45 +0200] [Client 9] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=2042, file=23
D [08/May/2023:20:53:45 +0200] [Client 9] Waiting for CGI data.
D [08/May/2023:20:53:45 +0200] [Client 9] Sending 0-length chunk.
D [08/May/2023:20:53:45 +0200] [Client 9] Flushing write buffer.
D [08/May/2023:20:53:45 +0200] [Client 9] New state is HTTP_STATE_WAITING
D [08/May/2023:20:53:45 +0200] [Client 9] Waiting for request.
D [08/May/2023:20:53:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [08/May/2023:20:53:45 +0200] [Client 9] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [08/May/2023:20:53:45 +0200] [Client 9] Closing connection.
D [08/May/2023:20:53:45 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
I [08/May/2023:20:53:46 +0200] Expiring subscriptions...
rauner@rauner-OptiPlex-3010:~$

panteraps36 · Le 08/05/2023, à 21:01

rauner@rauner-OptiPlex-3010:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom                                   Version                                 Architecture Description
+++-=====================================-=======================================-============-================================================================================
rauner@rauner-OptiPlex-3010:~$

panteraps36 · Le 08/05/2023, à 21:34

je n'y comprends pas grand chose
je pense que le driver installé n'est pas tout à fait compatible
sur le site canon ,en entrant MG2550S et driver : malheureusement votre appareil n'est plus pris en charge sous le système sélectionné (Linux)
pour 2500 2540 etc il y a les pilotes
par contre pour toutes les machines avec S plus de pilotes Linux par ex 2540 pilotes dispos ,2540S plus de pilotes
je n'ai pas fait toute la série
par contre dans la version 16.4 le pilote était présent puisque mon imprimante s'était installée toute seule
pour le scan la version semble commune à tous les modèles de la série ; c'est pour cela que le scan fonctionne

iznobe · Le 08/05/2023, à 21:38

Bonsoir , dans chaque nouvelle version , les pilotes pour le matériel sont intégrés lorsque c' est possible .

Donc forcement , les anciens ne sont plus installables puisqu ' ils sont intégrés et ils disparaissent des constructeurs ( quand ils tiennent leur site a jour ) .
ce n' est pas parcequ ' il n' y a pas de pilote a installer que ca veut dire que ca ne fonctionne(ra) pas .

Dernière modification par iznobe (Le 08/05/2023, à 21:39)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 06/05/2023, à 21:00

Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#2 Le 06/05/2023, à 21:30

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#3 Le 06/05/2023, à 22:34

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#4 Le 06/05/2023, à 22:39

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#5 Le 07/05/2023, à 07:55

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#6 Le 07/05/2023, à 10:28

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#7 Le 07/05/2023, à 11:36

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#8 Le 07/05/2023, à 21:43

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#9 Le 07/05/2023, à 22:36

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#10 Le 07/05/2023, à 22:57

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#11 Le 07/05/2023, à 22:58

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#12 Le 07/05/2023, à 23:01

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#13 Le 07/05/2023, à 23:04

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#14 Le 07/05/2023, à 23:21

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#15 Le 07/05/2023, à 23:26

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#16 Le 08/05/2023, à 12:13

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#17 Le 08/05/2023, à 12:20

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#18 Le 08/05/2023, à 12:29

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#19 Le 08/05/2023, à 20:51

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#20 Le 08/05/2023, à 20:52

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#21 Le 08/05/2023, à 20:54

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#22 Le 08/05/2023, à 20:59

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#23 Le 08/05/2023, à 21:01

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#24 Le 08/05/2023, à 21:34

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

#25 Le 08/05/2023, à 21:38

Re : Problème installation imprimante Canon MG 2550S sous 22.4 (RESOLU)

Pied de page des forums