#226 Le 19/10/2009, à 15:40
- nico_co
Re : ForeRunner et autre GPs Sportif
que dit
ls -rtla /dev/ttyUSB0;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#227 Le 19/10/2009, à 15:43
- shevalo
Re : ForeRunner et autre GPs Sportif
laurent@laurent-laptop:~$ ls -rtla /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 2009-10-19 15:08 /dev/ttyUSB0
Hors ligne
#228 Le 19/10/2009, à 15:45
- nico_co
Re : ForeRunner et autre GPs Sportif
peut etre en essayant ceci
sudo gpsbabel -i garmin -f /dev/ttyUSB0 -o kml -F /home/laurent/garmin.kmlet en donant ton password
;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#229 Le 19/10/2009, à 15:47
- shevalo
Re : ForeRunner et autre GPs Sportif
[ERROR] GPS_Packet_Read: Timeout. No data received.
GARMIN:Can't init /dev/ttyUSB0
Hors ligne
#230 Le 19/10/2009, à 15:53
- nico_co
Re : ForeRunner et autre GPs Sportif
bon là je seche es tu sur que ton cable ton GPS fonctionne as tu pus les tester sur une autre machine
une petite remarque la regle udev que tu as créé ne me parais pas nescessaire ( le fichier /etc/udev/rules.d/51-garmin.rules )
essay en le supriment et en debranchant rebranchant l'adaptateur usb vers série en recontrolant le
dmesg |tail
ls -rtla /dev/ttyUSB0;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#231 Le 19/10/2009, à 15:59
- shevalo
Re : ForeRunner et autre GPs Sportif
[ 1.068915] pci 0000:00:1c.0: IO window: disabled
[ 1.068920] pci 0000:00:1c.0: MEM window: disabled
[ 1.068923] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.068945] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 1.068947] pci 0000:00:1c.2: IO window: disabled
[ 1.068952] pci 0000:00:1c.2: MEM window: 0xc0000000-0xc00fffff
[ 1.068956] pci 0000:00:1c.2: PREFETCH window: 0x000000c0100000-0x000000c01fffff
[ 1.068972] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07
[ 1.068973] pci 0000:00:1c.3: IO window: disabled
[ 1.068978] pci 0000:00:1c.3: MEM window: 0xc0200000-0xc02fffff
[ 1.068982] pci 0000:00:1c.3: PREFETCH window: disabled
[ 1.069144] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
[ 1.069146] pci 0000:00:1c.5: IO window: disabled
[ 1.069151] pci 0000:00:1c.5: MEM window: 0xc0300000-0xc03fffff
[ 1.069154] pci 0000:00:1c.5: PREFETCH window: disabled
[ 1.069160] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 1.069162] pci 0000:00:1e.0: IO window: disabled
[ 1.069166] pci 0000:00:1e.0: MEM window: disabled
[ 1.069170] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.069182] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.069186] pci 0000:00:01.0: setting latency timer to 64
[ 1.069193] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.069198] pci 0000:00:1c.0: setting latency timer to 64
[ 1.069205] pci 0000:00:1c.2: enabling device (0000 -> 0002)
[ 1.069209] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.069214] pci 0000:00:1c.2: setting latency timer to 64
[ 1.069220] pci 0000:00:1c.3: enabling device (0000 -> 0002)
[ 1.069224] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.069229] pci 0000:00:1c.3: setting latency timer to 64
[ 1.069235] pci 0000:00:1c.5: enabling device (0000 -> 0002)
[ 1.069239] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.069244] pci 0000:00:1c.5: setting latency timer to 64
[ 1.069250] pci 0000:00:1e.0: setting latency timer to 64
[ 1.069253] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.069255] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.069258] bus: 01 index 0 io port: [0x2000-0x2fff]
[ 1.069260] bus: 01 index 1 mmio: [0xcc000000-0xceffffff]
[ 1.069262] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 1.069264] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.069265] bus: 02 index 0 mmio: [0x0-0xfff]
[ 1.069267] bus: 02 index 1 mmio: [0x0-0xfffff]
[ 1.069269] bus: 02 index 2 mmio: [0x0-0xfffff]
[ 1.069271] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.069273] bus: 06 index 0 mmio: [0x0-0xfff]
[ 1.069274] bus: 06 index 1 mmio: [0xc0000000-0xc00fffff]
[ 1.069276] bus: 06 index 2 mmio: [0xc0100000-0xc01fffff]
[ 1.069278] bus: 06 index 3 mmio: [0x0-0x0]
[ 1.069280] bus: 07 index 0 mmio: [0x0-0xfff]
[ 1.069282] bus: 07 index 1 mmio: [0xc0200000-0xc02fffff]
[ 1.069284] bus: 07 index 2 mmio: [0x0-0xfffff]
[ 1.069285] bus: 07 index 3 mmio: [0x0-0x0]
[ 1.069287] bus: 09 index 0 mmio: [0x0-0xfff]
[ 1.069289] bus: 09 index 1 mmio: [0xc0300000-0xc03fffff]
[ 1.069291] bus: 09 index 2 mmio: [0x0-0xfffff]
[ 1.069293] bus: 09 index 3 mmio: [0x0-0x0]
[ 1.069294] bus: 0a index 0 mmio: [0x0-0x0]
[ 1.069296] bus: 0a index 1 mmio: [0x0-0x0]
[ 1.069298] bus: 0a index 2 mmio: [0x0-0x0]
[ 1.069299] bus: 0a index 3 io port: [0x00-0xffff]
[ 1.069301] bus: 0a index 4 mmio: [0x000000-0xffffffff]
[ 1.069308] NET: Registered protocol family 2
[ 1.084047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.084256] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.084542] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.084690] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.084692] TCP reno registered
[ 1.088056] NET: Registered protocol family 1
[ 1.088157] checking if image is initramfs... it is
[ 1.726021] Freeing initrd memory: 7821k freed
[ 1.726058] Simple Boot Flag at 0x36 set to 0x1
[ 1.726227] cpufreq: No nForce2 chipset.
[ 1.726355] audit: initializing netlink socket (disabled)
[ 1.726378] type=2000 audit(1255952636.724:1): initialized
[ 1.733743] highmem bounce pool size: 64 pages
[ 1.733748] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.734975] VFS: Disk quotas dquot_6.5.1
[ 1.735027] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.735588] fuse init (API version 7.10)
[ 1.735666] msgmni has been set to 1672
[ 1.735825] alg: No test for stdrng (krng)
[ 1.735834] io scheduler noop registered
[ 1.735837] io scheduler anticipatory registered
[ 1.735838] io scheduler deadline registered
[ 1.735851] io scheduler cfq registered (default)
[ 1.736020] pci 0000:01:00.0: Boot video device
[ 1.737817] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.737851] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.737873] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.737882] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.737895] pci_express 0000:00:01.0:pcie02: allocate port service
[ 1.737907] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.737951] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.737983] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.738006] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.738017] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.738028] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.738039] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.738095] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.738127] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.738150] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 1.738161] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.738176] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.738187] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.738239] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.738271] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.738293] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X
[ 1.738304] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.738316] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.738327] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.738379] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.738410] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.738433] pcieport-driver 0000:00:1c.5: irq 2299 for MSI/MSI-X
[ 1.738444] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.738455] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.738467] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.738531] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.738707] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.739604] ACPI: AC Adapter [ACAD] (on-line)
[ 1.739680] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.739747] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.739749] ACPI: Power Button (FF) [PWRF]
[ 1.739791] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.739863] ACPI: Lid Switch [LID]
[ 1.739903] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.739906] ACPI: Power Button (CM) [PWRB]
[ 1.739944] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.739946] ACPI: Sleep Button (CM) [SLPB]
[ 1.740651] ACPI: SSDT BFD1ACA0, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20061109)
[ 1.741085] ACPI: SSDT BFD19620, 05B3 (r1 PmRef Cpu0Cst 3001 INTL 20061109)
[ 1.743291] Monitor-Mwait will be used to enter C-1 state
[ 1.743294] Monitor-Mwait will be used to enter C-2 state
[ 1.743297] Monitor-Mwait will be used to enter C-3 state
[ 1.743310] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.743332] processor ACPI_CPU:00: registered as cooling_device0
[ 1.743335] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.743759] ACPI: SSDT BFD1AA20, 01CF (r1 PmRef ApIst 3000 INTL 20061109)
[ 1.744202] ACPI: SSDT BFD1AF20, 008D (r1 PmRef ApCst 3000 INTL 20061109)
[ 1.745242] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.745259] processor ACPI_CPU:01: registered as cooling_device1
[ 1.745263] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.749286] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.750880] ACPI: Thermal Zone [THRM] (25 C)
[ 1.750924] isapnp: Scanning for PnP cards...
[ 2.105774] isapnp: No Plug & Play device found
[ 2.117223] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.118151] brd: module loaded
[ 2.118428] loop: module loaded
[ 2.118485] Fixed MDIO Bus: probed
[ 2.118491] PPP generic driver version 2.4.2
[ 2.118547] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.118573] Driver 'sd' needs updating - please use bus_type methods
[ 2.118582] Driver 'sr' needs updating - please use bus_type methods
[ 2.118652] ata_piix 0000:00:1f.2: version 2.12
[ 2.118661] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.118665] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 2.118702] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.118753] scsi0 : ata_piix
[ 2.118825] scsi1 : ata_piix
[ 2.118862] ata1: SATA max UDMA/133 cmd 0x18f0 ctl 0x18e4 bmdma 0x18d0 irq 19
[ 2.118865] ata2: SATA max UDMA/133 cmd 0x18e8 ctl 0x18e0 bmdma 0x18d8 irq 19
[ 2.592044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.600399] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
[ 2.600402] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.616417] ata1.00: configured for UDMA/133
[ 3.092042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.100195] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.B2, max UDMA/100
[ 3.116216] ata2.00: configured for UDMA/100
[ 3.116511] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
[ 3.116593] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.116609] sd 0:0:0:0: [sda] Write Protect is off
[ 3.116611] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.116634] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.116687] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.116701] sd 0:0:0:0: [sda] Write Protect is off
[ 3.116704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.116727] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.116730] sda: sda1 sda2 < sda5 sda6 >
[ 3.149056] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.149092] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.150059] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.B2 PQ: 0 ANSI: 5
[ 3.152838] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.152841] Uniform CD-ROM driver Revision: 3.20
[ 3.152918] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.152950] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.152965] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.152968] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.153004] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.153035] scsi2 : ata_piix
[ 3.153083] scsi3 : ata_piix
[ 3.153117] ata3: SATA max UDMA/133 cmd 0x1c48 ctl 0x18fc bmdma 0x1c30 irq 19
[ 3.153120] ata4: SATA max UDMA/133 cmd 0x1c40 ctl 0x18f8 bmdma 0x1c38 irq 19
[ 3.482617] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.810624] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.811258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.811273] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3.811288] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.811291] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.811340] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.815226] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.815232] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.815236] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0504000
[ 3.828008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.828066] usb usb1: configuration #1 chosen from 1 choice
[ 3.828090] hub 1-0:1.0: USB hub found
[ 3.828097] hub 1-0:1.0: 6 ports detected
[ 3.828190] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.828199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.828202] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.828238] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.832136] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.832142] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.832153] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504400
[ 3.848008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.848065] usb usb2: configuration #1 chosen from 1 choice
[ 3.848087] hub 2-0:1.0: USB hub found
[ 3.848093] hub 2-0:1.0: 6 ports detected
[ 3.848178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.848193] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.848209] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.848215] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.848217] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.848254] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.848282] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 3.848344] usb usb3: configuration #1 chosen from 1 choice
[ 3.848369] hub 3-0:1.0: USB hub found
[ 3.848375] hub 3-0:1.0: 2 ports detected
[ 3.848447] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.848452] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.848455] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.848500] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.848527] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 3.848593] usb usb4: configuration #1 chosen from 1 choice
[ 3.848615] hub 4-0:1.0: USB hub found
[ 3.848624] hub 4-0:1.0: 2 ports detected
[ 3.848697] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3.848702] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.848705] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.848744] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.848765] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 3.848826] usb usb5: configuration #1 chosen from 1 choice
[ 3.848849] hub 5-0:1.0: USB hub found
[ 3.848854] hub 5-0:1.0: 2 ports detected
[ 3.848932] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.848937] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.848940] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.848979] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.848999] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 3.849059] usb usb6: configuration #1 chosen from 1 choice
[ 3.849084] hub 6-0:1.0: USB hub found
[ 3.849089] hub 6-0:1.0: 2 ports detected
[ 3.849159] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.849164] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.849166] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.849210] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.849230] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 3.849294] usb usb7: configuration #1 chosen from 1 choice
[ 3.849316] hub 7-0:1.0: USB hub found
[ 3.849321] hub 7-0:1.0: 2 ports detected
[ 3.849395] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.849400] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.849403] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.849439] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.849466] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 3.849527] usb usb8: configuration #1 chosen from 1 choice
[ 3.849549] hub 8-0:1.0: USB hub found
[ 3.849554] hub 8-0:1.0: 2 ports detected
[ 3.849676] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.853388] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.854629] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.854633] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.854636] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.854638] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.854640] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.857034] mice: PS/2 mouse device common for all mice
[ 3.877056] rtc_cmos 00:05: RTC can wake from S4
[ 3.877084] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.877107] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.877159] device-mapper: uevent: version 1.0.3
[ 3.877229] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.877295] device-mapper: multipath: version 1.0.5 loaded
[ 3.877297] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.877362] EISA: Probing bus 0 at eisa.0
[ 3.877367] Cannot allocate resource for EISA slot 1
[ 3.877369] Cannot allocate resource for EISA slot 2
[ 3.877390] EISA: Detected 0 cards.
[ 3.877494] cpuidle: using governor ladder
[ 3.877601] cpuidle: using governor menu
[ 3.878061] TCP cubic registered
[ 3.878151] NET: Registered protocol family 10
[ 3.878536] lo: Disabled Privacy Extensions
[ 3.878841] NET: Registered protocol family 17
[ 3.878856] Bluetooth: L2CAP ver 2.11
[ 3.878858] Bluetooth: L2CAP socket layer initialized
[ 3.878860] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.878862] Bluetooth: SCO socket layer initialized
[ 3.878887] Bluetooth: RFCOMM socket layer initialized
[ 3.878892] Bluetooth: RFCOMM TTY layer initialized
[ 3.878893] Bluetooth: RFCOMM ver 1.10
[ 3.879151] Marking TSC unstable due to TSC halts in idle
[ 3.879540] Using IPI No-Shortcut mode
[ 3.879602] registered taskstats version 1
[ 3.879713] Magic number: 13:302:732
[ 3.879768] rtc_cmos 00:05: setting system clock to 2009-10-19 11:44:00 UTC (1255952640)
[ 3.879770] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.879772] EDD information not available.
[ 3.879998] Freeing unused kernel memory: 532k freed
[ 3.880124] Write protecting the kernel text: 4120k
[ 3.880168] Write protecting the kernel read-only data: 1524k
[ 3.915924] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.159545] tg3.c:v3.94 (August 14, 2008)
[ 4.159731] tg3 0000:09:00.0: enabling device (0000 -> 0002)
[ 4.159745] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.159774] tg3 0000:09:00.0: setting latency timer to 64
[ 4.449229] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 4.621500] usb 1-6: configuration #1 chosen from 1 choice
[ 4.769293] eth0: Tigon3 [partno(BCM95764M) rev 5784100 PHY(5784)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:68:d1:33:ee
[ 4.769296] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 4.769299] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.930434] PM: Starting manual resume from disk
[ 4.930437] PM: Resume from partition 8:5
[ 4.930439] PM: Checking hibernation image.
[ 4.930672] PM: Resume from disk failed.
[ 4.977031] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 4.980965] kjournald starting. Commit interval 5 seconds
[ 4.980973] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.001008] Clocksource tsc unstable (delta = -96383412 ns)
[ 5.131685] usb 4-1: configuration #1 chosen from 1 choice
[ 5.372096] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 5.537670] usb 4-2: configuration #1 chosen from 1 choice
[ 5.776080] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 5.944096] usb 6-1: configuration #1 chosen from 1 choice
[ 10.278199] udev: starting version 141
[ 10.772494] usbcore: registered new interface driver hiddev
[ 10.785273] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input6
[ 10.788192] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[ 10.788210] usbcore: registered new interface driver usbhid
[ 10.788231] usbhid: v2.6:USB HID core driver
[ 10.792742] sdhci: Secure Digital Host Controller Interface driver
[ 10.792744] sdhci: Copyright(c) Pierre Ossman
[ 10.818523] sdhci-pci 0000:06:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 10.818537] sdhci-pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 10.818544] sdhci-pci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.818685] sdhci-pci 0000:06:00.0: setting latency timer to 64
[ 10.818748] mmc0: SDHCI controller on PCI [0000:06:00.0] using ADMA
[ 10.818757] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 10.818770] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.818776] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 10.818782] sdhci-pci 0000:06:00.2: PCI INT A disabled
[ 10.840114] cfg80211: Calling CRDA to update world regulatory domain
[ 10.868334] acpi device:03: registered as cooling_device2
[ 10.868942] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
[ 10.876125] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.936334] cfg80211: World regulatory domain updated:
[ 10.936337] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.936340] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.936342] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.936344] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.936346] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.936348] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.067279] Linux video capture interface: v2.00
[ 11.186107] Linux agpgart interface v0.103
[ 11.239650] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 11.258546] usbcore: registered new interface driver usbserial
[ 11.258560] USB Serial support registered for generic
[ 11.258601] usbcore: registered new interface driver usbserial_generic
[ 11.258603] usbserial: USB Serial Driver core
[ 11.556218] iTCO_vendor_support: vendor-support=0
[ 11.722427] nvidia: module license 'NVIDIA' taints kernel.
[ 11.742226] USB Serial support registered for pl2303
[ 11.742273] pl2303 4-1:1.0: pl2303 converter detected
[ 11.758698] usb 4-1: pl2303 converter now attached to ttyUSB0
[ 11.758718] usbcore: registered new interface driver pl2303
[ 11.758721] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 11.764369] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[ 11.765929] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input9
[ 11.975158] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.975179] nvidia 0000:01:00.0: setting latency timer to 64
[ 11.976071] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 11.978065] usbcore: registered new interface driver uvcvideo
[ 11.978089] USB Video Class driver (v0.1.0)
[ 11.990483] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.990576] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 11.990625] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.002414] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 12.002897] acer-wmi: Brightness must be controlled by generic video driver
[ 12.002983] acer-wmi: software RFKILL enabled
[ 12.117960] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 12.117963] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 12.118020] iwlagn 0000:07:00.0: enabling device (0000 -> 0002)
[ 12.118028] iwlagn 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 12.118038] iwlagn 0000:07:00.0: setting latency timer to 64
[ 12.118076] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 12.139510] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 12.139568] iwlagn 0000:07:00.0: irq 2298 for MSI/MSI-X
[ 12.140385] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 12.141346] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 12.300721] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.300783] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.580741] lp: driver loaded but no devices found
[ 12.660744] Adding 1951888k swap on /dev/sda5. Priority:-1 extents:1 across:1951888k
[ 12.982550] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
[ 13.017333] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 13.194115] EXT3 FS on sda1, internal journal
[ 14.090830] kjournald starting. Commit interval 5 seconds
[ 14.093271] EXT3 FS on sda6, internal journal
[ 14.093276] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.410594] type=1505 audit(1255952651.029:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2196
[ 14.452840] type=1505 audit(1255952651.069:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2200
[ 14.452924] type=1505 audit(1255952651.069:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2200
[ 14.452961] type=1505 audit(1255952651.069:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2200
[ 14.453009] type=1505 audit(1255952651.069:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2200
[ 14.570202] type=1505 audit(1255952651.189:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2205
[ 14.570351] type=1505 audit(1255952651.189:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2205
[ 14.595232] type=1505 audit(1255952651.213:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2209
[ 22.376612] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.376615] Bluetooth: BNEP filters: protocol multicast
[ 22.436645] Bridge firewalling registered
[ 24.155374] ppdev: user-space parallel port driver
[ 25.797014] CE: hpet increasing min_delta_ns to 15000 nsec
[ 26.289168] CE: hpet increasing min_delta_ns to 22500 nsec
[ 28.385902] tg3 0000:09:00.0: irq 2297 for MSI/MSI-X
[ 28.547628] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.920163] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 29.890815] Registered led device: iwl-phy0:radio
[ 29.890835] Registered led device: iwl-phy0:assoc
[ 29.890849] Registered led device: iwl-phy0:RX
[ 29.890863] Registered led device: iwl-phy0:TX
[ 30.154607] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.307714] wlan0: authenticate with AP a2:6b:71:48:0b:86
[ 32.315732] wlan0: authenticated
[ 32.315735] wlan0: associate with AP a2:6b:71:48:0b:86
[ 32.318952] wlan0: RX AssocResp from a2:6b:71:48:0b:86 (capab=0x401 status=0 aid=2)
[ 32.318955] wlan0: associated
[ 32.320367] wlan0: disassociating by local choice (reason=3)
[ 934.763261] wlan0: authenticate with AP a2:6b:71:48:0b:84
[ 934.861199] wlan0: authenticate with AP a2:6b:71:48:0b:84
[ 934.861228] wlan0: authenticated
[ 934.861231] wlan0: associate with AP a2:6b:71:48:0b:84
[ 934.872950] wlan0: RX AssocResp from a2:6b:71:48:0b:84 (capab=0x411 status=0 aid=2)
[ 934.872953] wlan0: associated
[ 934.873994] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 945.168034] wlan0: no IPv6 routers present
[ 6244.864051] CE: hpet increasing min_delta_ns to 33750 nsec
[ 6524.008420] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 7957.496180] usb 4-1: USB disconnect, address 2
[ 7957.497218] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[ 7957.497674] pl2303 4-1:1.0: device disconnected
[ 7959.224055] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 7959.384141] usb 4-1: configuration #1 chosen from 1 choice
[ 7959.386857] pl2303 4-1:1.0: pl2303 converter detected
[ 7959.409918] usb 4-1: pl2303 converter now attached to ttyUSB0laurent@laurent-laptop:~$ ls -rtla /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 2009-10-19 15:56 /dev/ttyUSB0laurent@laurent-laptop:~$ tail -f /dev/ttyUSB0
rien, nada.....Hors ligne
#232 Le 19/10/2009, à 16:03
- shevalo
Re : ForeRunner et autre GPs Sportif
[ 1.012710] pci 0000:00:1c.2: BAR 9: can't allocate resource
[ 1.012710] pci 0000:00:1c.3: BAR 7: can't allocate resource
[ 1.012710] pci 0000:00:1c.3: BAR 8: can't allocate resource
[ 1.012710] pci 0000:00:1c.3: BAR 9: can't allocate resource
[ 1.012710] pci 0000:00:1c.5: BAR 7: can't allocate resource
[ 1.012710] pci 0000:00:1c.5: BAR 8: can't allocate resource
[ 1.012710] pci 0000:00:1c.5: BAR 9: can't allocate resource
[ 1.012710] pci 0000:06:00.2: BAR 0: can't allocate resource
[ 1.012710] pci 0000:06:00.3: BAR 0: can't allocate resource
[ 1.012710] pci 0000:06:00.4: BAR 0: can't allocate resource
[ 1.020009] Bluetooth: Core ver 2.13
[ 1.020023] NET: Registered protocol family 31
[ 1.020023] Bluetooth: HCI device and connection manager initialized
[ 1.020023] Bluetooth: HCI socket layer initialized
[ 1.020023] NET: Registered protocol family 8
[ 1.020023] NET: Registered protocol family 20
[ 1.020032] NetLabel: Initializing
[ 1.020034] NetLabel: domain hash size = 128
[ 1.020035] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.020047] NetLabel: unlabeled traffic allowed by default
[ 1.020060] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.020065] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.024053] AppArmor: AppArmor Filesystem Enabled
[ 1.028010] Switched to high resolution mode on CPU 0
[ 1.028732] Switched to high resolution mode on CPU 1
[ 1.032009] pnp: PnP ACPI init
[ 1.032017] ACPI: bus type pnp registered
[ 1.034124] pnp: PnP ACPI: found 10 devices
[ 1.034126] ACPI: ACPI bus type pnp unregistered
[ 1.034129] PnPBIOS: Disabled by ACPI PNP
[ 1.034139] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.034145] system 00:04: ioport range 0x680-0x69f has been reserved
[ 1.034147] system 00:04: ioport range 0x480-0x48f has been reserved
[ 1.034150] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 1.034152] system 00:04: ioport range 0xffff-0xffff has been reserved
[ 1.034155] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 1.034157] system 00:04: ioport range 0x1180-0x11ff has been reserved
[ 1.034159] system 00:04: ioport range 0x164e-0x164f has been reserved
[ 1.034162] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 1.034164] system 00:04: ioport range 0x400-0x47f has been reserved
[ 1.034171] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.034174] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
[ 1.034177] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.034179] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.034181] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.034184] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.034186] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
[ 1.034189] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.068897] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 1.068900] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.068902] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 1.068906] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
[ 1.068909] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.068914] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.068915] pci 0000:00:1c.0: IO window: disabled
[ 1.068920] pci 0000:00:1c.0: MEM window: disabled
[ 1.068923] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.068945] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 1.068947] pci 0000:00:1c.2: IO window: disabled
[ 1.068952] pci 0000:00:1c.2: MEM window: 0xc0000000-0xc00fffff
[ 1.068956] pci 0000:00:1c.2: PREFETCH window: 0x000000c0100000-0x000000c01fffff
[ 1.068972] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07
[ 1.068973] pci 0000:00:1c.3: IO window: disabled
[ 1.068978] pci 0000:00:1c.3: MEM window: 0xc0200000-0xc02fffff
[ 1.068982] pci 0000:00:1c.3: PREFETCH window: disabled
[ 1.069144] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
[ 1.069146] pci 0000:00:1c.5: IO window: disabled
[ 1.069151] pci 0000:00:1c.5: MEM window: 0xc0300000-0xc03fffff
[ 1.069154] pci 0000:00:1c.5: PREFETCH window: disabled
[ 1.069160] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 1.069162] pci 0000:00:1e.0: IO window: disabled
[ 1.069166] pci 0000:00:1e.0: MEM window: disabled
[ 1.069170] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.069182] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.069186] pci 0000:00:01.0: setting latency timer to 64
[ 1.069193] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.069198] pci 0000:00:1c.0: setting latency timer to 64
[ 1.069205] pci 0000:00:1c.2: enabling device (0000 -> 0002)
[ 1.069209] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.069214] pci 0000:00:1c.2: setting latency timer to 64
[ 1.069220] pci 0000:00:1c.3: enabling device (0000 -> 0002)
[ 1.069224] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.069229] pci 0000:00:1c.3: setting latency timer to 64
[ 1.069235] pci 0000:00:1c.5: enabling device (0000 -> 0002)
[ 1.069239] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.069244] pci 0000:00:1c.5: setting latency timer to 64
[ 1.069250] pci 0000:00:1e.0: setting latency timer to 64
[ 1.069253] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.069255] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.069258] bus: 01 index 0 io port: [0x2000-0x2fff]
[ 1.069260] bus: 01 index 1 mmio: [0xcc000000-0xceffffff]
[ 1.069262] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 1.069264] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.069265] bus: 02 index 0 mmio: [0x0-0xfff]
[ 1.069267] bus: 02 index 1 mmio: [0x0-0xfffff]
[ 1.069269] bus: 02 index 2 mmio: [0x0-0xfffff]
[ 1.069271] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.069273] bus: 06 index 0 mmio: [0x0-0xfff]
[ 1.069274] bus: 06 index 1 mmio: [0xc0000000-0xc00fffff]
[ 1.069276] bus: 06 index 2 mmio: [0xc0100000-0xc01fffff]
[ 1.069278] bus: 06 index 3 mmio: [0x0-0x0]
[ 1.069280] bus: 07 index 0 mmio: [0x0-0xfff]
[ 1.069282] bus: 07 index 1 mmio: [0xc0200000-0xc02fffff]
[ 1.069284] bus: 07 index 2 mmio: [0x0-0xfffff]
[ 1.069285] bus: 07 index 3 mmio: [0x0-0x0]
[ 1.069287] bus: 09 index 0 mmio: [0x0-0xfff]
[ 1.069289] bus: 09 index 1 mmio: [0xc0300000-0xc03fffff]
[ 1.069291] bus: 09 index 2 mmio: [0x0-0xfffff]
[ 1.069293] bus: 09 index 3 mmio: [0x0-0x0]
[ 1.069294] bus: 0a index 0 mmio: [0x0-0x0]
[ 1.069296] bus: 0a index 1 mmio: [0x0-0x0]
[ 1.069298] bus: 0a index 2 mmio: [0x0-0x0]
[ 1.069299] bus: 0a index 3 io port: [0x00-0xffff]
[ 1.069301] bus: 0a index 4 mmio: [0x000000-0xffffffff]
[ 1.069308] NET: Registered protocol family 2
[ 1.084047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.084256] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.084542] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.084690] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.084692] TCP reno registered
[ 1.088056] NET: Registered protocol family 1
[ 1.088157] checking if image is initramfs... it is
[ 1.726021] Freeing initrd memory: 7821k freed
[ 1.726058] Simple Boot Flag at 0x36 set to 0x1
[ 1.726227] cpufreq: No nForce2 chipset.
[ 1.726355] audit: initializing netlink socket (disabled)
[ 1.726378] type=2000 audit(1255952636.724:1): initialized
[ 1.733743] highmem bounce pool size: 64 pages
[ 1.733748] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.734975] VFS: Disk quotas dquot_6.5.1
[ 1.735027] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.735588] fuse init (API version 7.10)
[ 1.735666] msgmni has been set to 1672
[ 1.735825] alg: No test for stdrng (krng)
[ 1.735834] io scheduler noop registered
[ 1.735837] io scheduler anticipatory registered
[ 1.735838] io scheduler deadline registered
[ 1.735851] io scheduler cfq registered (default)
[ 1.736020] pci 0000:01:00.0: Boot video device
[ 1.737817] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.737851] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.737873] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.737882] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.737895] pci_express 0000:00:01.0:pcie02: allocate port service
[ 1.737907] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.737951] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.737983] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.738006] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.738017] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.738028] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.738039] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.738095] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.738127] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.738150] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 1.738161] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.738176] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.738187] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.738239] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.738271] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.738293] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X
[ 1.738304] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.738316] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.738327] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.738379] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.738410] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.738433] pcieport-driver 0000:00:1c.5: irq 2299 for MSI/MSI-X
[ 1.738444] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.738455] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.738467] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.738531] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.738707] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.739604] ACPI: AC Adapter [ACAD] (on-line)
[ 1.739680] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.739747] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.739749] ACPI: Power Button (FF) [PWRF]
[ 1.739791] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.739863] ACPI: Lid Switch [LID]
[ 1.739903] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.739906] ACPI: Power Button (CM) [PWRB]
[ 1.739944] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.739946] ACPI: Sleep Button (CM) [SLPB]
[ 1.740651] ACPI: SSDT BFD1ACA0, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20061109)
[ 1.741085] ACPI: SSDT BFD19620, 05B3 (r1 PmRef Cpu0Cst 3001 INTL 20061109)
[ 1.743291] Monitor-Mwait will be used to enter C-1 state
[ 1.743294] Monitor-Mwait will be used to enter C-2 state
[ 1.743297] Monitor-Mwait will be used to enter C-3 state
[ 1.743310] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.743332] processor ACPI_CPU:00: registered as cooling_device0
[ 1.743335] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.743759] ACPI: SSDT BFD1AA20, 01CF (r1 PmRef ApIst 3000 INTL 20061109)
[ 1.744202] ACPI: SSDT BFD1AF20, 008D (r1 PmRef ApCst 3000 INTL 20061109)
[ 1.745242] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.745259] processor ACPI_CPU:01: registered as cooling_device1
[ 1.745263] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.749286] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.750880] ACPI: Thermal Zone [THRM] (25 C)
[ 1.750924] isapnp: Scanning for PnP cards...
[ 2.105774] isapnp: No Plug & Play device found
[ 2.117223] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.118151] brd: module loaded
[ 2.118428] loop: module loaded
[ 2.118485] Fixed MDIO Bus: probed
[ 2.118491] PPP generic driver version 2.4.2
[ 2.118547] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.118573] Driver 'sd' needs updating - please use bus_type methods
[ 2.118582] Driver 'sr' needs updating - please use bus_type methods
[ 2.118652] ata_piix 0000:00:1f.2: version 2.12
[ 2.118661] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.118665] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 2.118702] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.118753] scsi0 : ata_piix
[ 2.118825] scsi1 : ata_piix
[ 2.118862] ata1: SATA max UDMA/133 cmd 0x18f0 ctl 0x18e4 bmdma 0x18d0 irq 19
[ 2.118865] ata2: SATA max UDMA/133 cmd 0x18e8 ctl 0x18e0 bmdma 0x18d8 irq 19
[ 2.592044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.600399] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133
[ 2.600402] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.616417] ata1.00: configured for UDMA/133
[ 3.092042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.100195] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.B2, max UDMA/100
[ 3.116216] ata2.00: configured for UDMA/100
[ 3.116511] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
[ 3.116593] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.116609] sd 0:0:0:0: [sda] Write Protect is off
[ 3.116611] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.116634] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.116687] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.116701] sd 0:0:0:0: [sda] Write Protect is off
[ 3.116704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.116727] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.116730] sda: sda1 sda2 < sda5 sda6 >
[ 3.149056] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.149092] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.150059] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.B2 PQ: 0 ANSI: 5
[ 3.152838] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.152841] Uniform CD-ROM driver Revision: 3.20
[ 3.152918] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.152950] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.152965] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.152968] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.153004] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.153035] scsi2 : ata_piix
[ 3.153083] scsi3 : ata_piix
[ 3.153117] ata3: SATA max UDMA/133 cmd 0x1c48 ctl 0x18fc bmdma 0x1c30 irq 19
[ 3.153120] ata4: SATA max UDMA/133 cmd 0x1c40 ctl 0x18f8 bmdma 0x1c38 irq 19
[ 3.482617] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.810624] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.811258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.811273] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3.811288] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.811291] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.811340] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.815226] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.815232] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.815236] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0504000
[ 3.828008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.828066] usb usb1: configuration #1 chosen from 1 choice
[ 3.828090] hub 1-0:1.0: USB hub found
[ 3.828097] hub 1-0:1.0: 6 ports detected
[ 3.828190] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.828199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.828202] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.828238] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.832136] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.832142] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.832153] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504400
[ 3.848008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.848065] usb usb2: configuration #1 chosen from 1 choice
[ 3.848087] hub 2-0:1.0: USB hub found
[ 3.848093] hub 2-0:1.0: 6 ports detected
[ 3.848178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.848193] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.848209] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.848215] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.848217] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.848254] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.848282] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 3.848344] usb usb3: configuration #1 chosen from 1 choice
[ 3.848369] hub 3-0:1.0: USB hub found
[ 3.848375] hub 3-0:1.0: 2 ports detected
[ 3.848447] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.848452] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.848455] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.848500] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.848527] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 3.848593] usb usb4: configuration #1 chosen from 1 choice
[ 3.848615] hub 4-0:1.0: USB hub found
[ 3.848624] hub 4-0:1.0: 2 ports detected
[ 3.848697] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3.848702] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.848705] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.848744] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.848765] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 3.848826] usb usb5: configuration #1 chosen from 1 choice
[ 3.848849] hub 5-0:1.0: USB hub found
[ 3.848854] hub 5-0:1.0: 2 ports detected
[ 3.848932] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.848937] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.848940] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.848979] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.848999] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 3.849059] usb usb6: configuration #1 chosen from 1 choice
[ 3.849084] hub 6-0:1.0: USB hub found
[ 3.849089] hub 6-0:1.0: 2 ports detected
[ 3.849159] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.849164] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.849166] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.849210] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.849230] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 3.849294] usb usb7: configuration #1 chosen from 1 choice
[ 3.849316] hub 7-0:1.0: USB hub found
[ 3.849321] hub 7-0:1.0: 2 ports detected
[ 3.849395] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.849400] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.849403] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.849439] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.849466] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 3.849527] usb usb8: configuration #1 chosen from 1 choice
[ 3.849549] hub 8-0:1.0: USB hub found
[ 3.849554] hub 8-0:1.0: 2 ports detected
[ 3.849676] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.853388] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.854629] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.854633] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.854636] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.854638] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.854640] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.857034] mice: PS/2 mouse device common for all mice
[ 3.877056] rtc_cmos 00:05: RTC can wake from S4
[ 3.877084] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.877107] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.877159] device-mapper: uevent: version 1.0.3
[ 3.877229] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.877295] device-mapper: multipath: version 1.0.5 loaded
[ 3.877297] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.877362] EISA: Probing bus 0 at eisa.0
[ 3.877367] Cannot allocate resource for EISA slot 1
[ 3.877369] Cannot allocate resource for EISA slot 2
[ 3.877390] EISA: Detected 0 cards.
[ 3.877494] cpuidle: using governor ladder
[ 3.877601] cpuidle: using governor menu
[ 3.878061] TCP cubic registered
[ 3.878151] NET: Registered protocol family 10
[ 3.878536] lo: Disabled Privacy Extensions
[ 3.878841] NET: Registered protocol family 17
[ 3.878856] Bluetooth: L2CAP ver 2.11
[ 3.878858] Bluetooth: L2CAP socket layer initialized
[ 3.878860] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.878862] Bluetooth: SCO socket layer initialized
[ 3.878887] Bluetooth: RFCOMM socket layer initialized
[ 3.878892] Bluetooth: RFCOMM TTY layer initialized
[ 3.878893] Bluetooth: RFCOMM ver 1.10
[ 3.879151] Marking TSC unstable due to TSC halts in idle
[ 3.879540] Using IPI No-Shortcut mode
[ 3.879602] registered taskstats version 1
[ 3.879713] Magic number: 13:302:732
[ 3.879768] rtc_cmos 00:05: setting system clock to 2009-10-19 11:44:00 UTC (1255952640)
[ 3.879770] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.879772] EDD information not available.
[ 3.879998] Freeing unused kernel memory: 532k freed
[ 3.880124] Write protecting the kernel text: 4120k
[ 3.880168] Write protecting the kernel read-only data: 1524k
[ 3.915924] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.159545] tg3.c:v3.94 (August 14, 2008)
[ 4.159731] tg3 0000:09:00.0: enabling device (0000 -> 0002)
[ 4.159745] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.159774] tg3 0000:09:00.0: setting latency timer to 64
[ 4.449229] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 4.621500] usb 1-6: configuration #1 chosen from 1 choice
[ 4.769293] eth0: Tigon3 [partno(BCM95764M) rev 5784100 PHY(5784)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:68:d1:33:ee
[ 4.769296] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 4.769299] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.930434] PM: Starting manual resume from disk
[ 4.930437] PM: Resume from partition 8:5
[ 4.930439] PM: Checking hibernation image.
[ 4.930672] PM: Resume from disk failed.
[ 4.977031] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 4.980965] kjournald starting. Commit interval 5 seconds
[ 4.980973] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.001008] Clocksource tsc unstable (delta = -96383412 ns)
[ 5.131685] usb 4-1: configuration #1 chosen from 1 choice
[ 5.372096] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 5.537670] usb 4-2: configuration #1 chosen from 1 choice
[ 5.776080] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 5.944096] usb 6-1: configuration #1 chosen from 1 choice
[ 10.278199] udev: starting version 141
[ 10.772494] usbcore: registered new interface driver hiddev
[ 10.785273] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input6
[ 10.788192] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[ 10.788210] usbcore: registered new interface driver usbhid
[ 10.788231] usbhid: v2.6:USB HID core driver
[ 10.792742] sdhci: Secure Digital Host Controller Interface driver
[ 10.792744] sdhci: Copyright(c) Pierre Ossman
[ 10.818523] sdhci-pci 0000:06:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 10.818537] sdhci-pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 10.818544] sdhci-pci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.818685] sdhci-pci 0000:06:00.0: setting latency timer to 64
[ 10.818748] mmc0: SDHCI controller on PCI [0000:06:00.0] using ADMA
[ 10.818757] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 10.818770] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.818776] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 10.818782] sdhci-pci 0000:06:00.2: PCI INT A disabled
[ 10.840114] cfg80211: Calling CRDA to update world regulatory domain
[ 10.868334] acpi device:03: registered as cooling_device2
[ 10.868942] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
[ 10.876125] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.936334] cfg80211: World regulatory domain updated:
[ 10.936337] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.936340] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.936342] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.936344] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.936346] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.936348] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.067279] Linux video capture interface: v2.00
[ 11.186107] Linux agpgart interface v0.103
[ 11.239650] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 11.258546] usbcore: registered new interface driver usbserial
[ 11.258560] USB Serial support registered for generic
[ 11.258601] usbcore: registered new interface driver usbserial_generic
[ 11.258603] usbserial: USB Serial Driver core
[ 11.556218] iTCO_vendor_support: vendor-support=0
[ 11.722427] nvidia: module license 'NVIDIA' taints kernel.
[ 11.742226] USB Serial support registered for pl2303
[ 11.742273] pl2303 4-1:1.0: pl2303 converter detected
[ 11.758698] usb 4-1: pl2303 converter now attached to ttyUSB0
[ 11.758718] usbcore: registered new interface driver pl2303
[ 11.758721] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 11.764369] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[ 11.765929] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input9
[ 11.975158] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.975179] nvidia 0000:01:00.0: setting latency timer to 64
[ 11.976071] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 11.978065] usbcore: registered new interface driver uvcvideo
[ 11.978089] USB Video Class driver (v0.1.0)
[ 11.990483] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 11.990576] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 11.990625] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.002414] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 12.002897] acer-wmi: Brightness must be controlled by generic video driver
[ 12.002983] acer-wmi: software RFKILL enabled
[ 12.117960] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 12.117963] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 12.118020] iwlagn 0000:07:00.0: enabling device (0000 -> 0002)
[ 12.118028] iwlagn 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 12.118038] iwlagn 0000:07:00.0: setting latency timer to 64
[ 12.118076] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 12.139510] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 12.139568] iwlagn 0000:07:00.0: irq 2298 for MSI/MSI-X
[ 12.140385] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 12.141346] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 12.300721] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.300783] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.580741] lp: driver loaded but no devices found
[ 12.660744] Adding 1951888k swap on /dev/sda5. Priority:-1 extents:1 across:1951888k
[ 12.982550] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
[ 13.017333] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 13.194115] EXT3 FS on sda1, internal journal
[ 14.090830] kjournald starting. Commit interval 5 seconds
[ 14.093271] EXT3 FS on sda6, internal journal
[ 14.093276] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.410594] type=1505 audit(1255952651.029:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2196
[ 14.452840] type=1505 audit(1255952651.069:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2200
[ 14.452924] type=1505 audit(1255952651.069:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2200
[ 14.452961] type=1505 audit(1255952651.069:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2200
[ 14.453009] type=1505 audit(1255952651.069:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2200
[ 14.570202] type=1505 audit(1255952651.189:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2205
[ 14.570351] type=1505 audit(1255952651.189:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2205
[ 14.595232] type=1505 audit(1255952651.213:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2209
[ 22.376612] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.376615] Bluetooth: BNEP filters: protocol multicast
[ 22.436645] Bridge firewalling registered
[ 24.155374] ppdev: user-space parallel port driver
[ 25.797014] CE: hpet increasing min_delta_ns to 15000 nsec
[ 26.289168] CE: hpet increasing min_delta_ns to 22500 nsec
[ 28.385902] tg3 0000:09:00.0: irq 2297 for MSI/MSI-X
[ 28.547628] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.920163] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 29.890815] Registered led device: iwl-phy0:radio
[ 29.890835] Registered led device: iwl-phy0:assoc
[ 29.890849] Registered led device: iwl-phy0:RX
[ 29.890863] Registered led device: iwl-phy0:TX
[ 30.154607] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.307714] wlan0: authenticate with AP a2:6b:71:48:0b:86
[ 32.315732] wlan0: authenticated
[ 32.315735] wlan0: associate with AP a2:6b:71:48:0b:86
[ 32.318952] wlan0: RX AssocResp from a2:6b:71:48:0b:86 (capab=0x401 status=0 aid=2)
[ 32.318955] wlan0: associated
[ 32.320367] wlan0: disassociating by local choice (reason=3)
[ 934.763261] wlan0: authenticate with AP a2:6b:71:48:0b:84
[ 934.861199] wlan0: authenticate with AP a2:6b:71:48:0b:84
[ 934.861228] wlan0: authenticated
[ 934.861231] wlan0: associate with AP a2:6b:71:48:0b:84
[ 934.872950] wlan0: RX AssocResp from a2:6b:71:48:0b:84 (capab=0x411 status=0 aid=2)
[ 934.872953] wlan0: associated
[ 934.873994] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 945.168034] wlan0: no IPv6 routers present
[ 6244.864051] CE: hpet increasing min_delta_ns to 33750 nsec
[ 6524.008420] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 7957.496180] usb 4-1: USB disconnect, address 2
[ 7957.497218] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[ 7957.497674] pl2303 4-1:1.0: device disconnected
[ 7959.224055] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 7959.384141] usb 4-1: configuration #1 chosen from 1 choice
[ 7959.386857] pl2303 4-1:1.0: pl2303 converter detected
[ 7959.409918] usb 4-1: pl2303 converter now attached to ttyUSB0
[ 8199.048118] usb 4-1: USB disconnect, address 4
[ 8199.050196] pl2303 4-1:1.0: device disconnected
[ 8200.288068] usb 4-1: new full speed USB device using uhci_hcd and address 5
[ 8200.446958] usb 4-1: configuration #1 chosen from 1 choice
[ 8200.456874] pl2303 4-1:1.0: pl2303 converter detected
[ 8200.478424] usb 4-1: pl2303 converter now attached to ttyUSB1Hors ligne
#233 Le 19/10/2009, à 16:06
- nico_co
Re : ForeRunner et autre GPs Sportif
au moin ça prouve que la règle udev ne servait à rien
peux tu modifier dans le GPS le protocole de communication pour le reglé sur NMEA et refaire
tail -f /dev/ttyUSB1tu devrai voire des message passer si la communication est bonne
Dernière modification par nico_co (Le 19/10/2009, à 16:09)
;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#234 Le 19/10/2009, à 16:09
- shevalo
Re : ForeRunner et autre GPs Sportif
que dalle non plus. Pourtant, j'ai deux cables et avec les deux ca me fait le meme coup.
Hors ligne
#235 Le 19/10/2009, à 16:29
- shevalo
Re : ForeRunner et autre GPs Sportif
une autre idée?
Hors ligne
#236 Le 19/10/2009, à 16:29
- nico_co
Re : ForeRunner et autre GPs Sportif
as tu pus tester ton GPs et tes cable sur un autre ordinateur ou materiel
et au hazard ou abite tu conais tu Parain Linux car là à distance je voie pas trop de solution ...
;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#237 Le 19/10/2009, à 16:31
- shevalo
Re : ForeRunner et autre GPs Sportif
je suis en region parisienne, dans le 78..
Hors ligne
#238 Le 19/10/2009, à 16:55
- nico_co
Re : ForeRunner et autre GPs Sportif
une autre idée?
non à part tester le materiel pour evacuer tous les doutes ?
parrain linux
http://parrains.linux.free.fr/index.php?choix1=11&choix2=78#rencontrez
;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#239 Le 19/10/2009, à 19:05
- shevalo
Re : ForeRunner et autre GPs Sportif
Bien merci quand meme pour ton devouement, si je trouve la solution, je la transmet a tout le monde ici.
Hors ligne
#240 Le 02/11/2009, à 23:05
- kikislater
Re : ForeRunner et autre GPs Sportif
@nico_co
Merci pour ton magnifique programme Byo2Png
Est-il possible de le faire fonctionner avec Photoexplorer ?
Je te laisse le log enregistré de ma procédure mais avec photoexplorer
http://dl.free.fr/qiqNFTXMi
Hors ligne
#241 Le 04/11/2009, à 18:19
- kikislater
Re : ForeRunner et autre GPs Sportif
Est-il possible de modifier le Byo2png.gambas pour y rajouter la création de fichiers .cal .jpr et .map
D'avnce merci.
Mon problème du post précédent était le fichier france.dal remplacé par celui de photoexploreur mais la transformation ne fonctionne pas !
Hors ligne
#242 Le 04/11/2009, à 22:42
- nico_co
Re : ForeRunner et autre GPs Sportif
je ne suis pas sur que le codage des fichier soit du meme type entre photoexplorer et cartoexplorer
mais je vai te preparer ça pour le weekend
;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#243 Le 04/11/2009, à 22:51
- kikislater
Re : ForeRunner et autre GPs Sportif
Je te remercie beaucoup, c'est sympa ce que tu fais pour nous.
Hors ligne
#244 Le 06/11/2009, à 00:08
- pobsteta
Re : ForeRunner et autre GPs Sportif
bonjour,
j'ai un garmin etrex vista H qui ne fonctionne pas avec gpsbabel ? des idées ? il est bien reconnu sur 09be:0003 mais rien ?
@+
Hors ligne
#245 Le 06/11/2009, à 08:58
- nico_co
Re : ForeRunner et autre GPs Sportif
normalement les GPS Garmin s'identifie comme
Bus 001 Device 003: ID 091e:0003 Garmin International GPSmap (various models)
es tu sur de ta connexion peux tu fair
lsusbavec ton gps connecté .
Dernière modification par nico_co (Le 06/11/2009, à 08:59)
;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#246 Le 15/11/2009, à 19:26
- Sebulba
Re : ForeRunner et autre GPs Sportif
Samut Nico, petit soucis.
J'ai échangé mon pc contre le portable de ma compagne.
Avec ton soft, impossible de rapatrier les données.
Je vérifie si mon Forerunner 305 est bien reconnu
sebulba@sebulba-laptop:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 007: ID 045e:0714 Microsoft Corp.
Bus 002 Device 006: ID 045e:0707 Microsoft Corp.
Bus 002 Device 005: ID 091e:0003 Garmin International GPSmap (various models)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
sebulba@sebulba-laptop:~$Mais aussi
sebulba@sebulba-laptop:~$ gpsbabel -t -i garmin -f usb:-1
Claim interfaced failed: could not claim interface 0: Operation not permitted
sebulba@sebulba-laptop:~$sebulba@sebulba-laptop:~$ gpsbabel -t -i garmin -f usb:-1
Claim interfaced failed: could not claim interface 0: Operation not permitted
sebulba@sebulba-laptop:~$ sudo gpsbabel -t -i garmin -f usb:-1
0 3513702681 484 Forerunner305 Software Version 2.90
sebulba@sebulba-laptop:~$C'est donc un soucis de droits d'accès.
Tu aurais une soluce pour moi ?
Si je lance ton soft avec le sudo, il recherche les répertoires en root.
Merci ;o)
Dernière modification par Sebulba (Le 15/11/2009, à 19:27)
Pascal Verstraeten
pascal.verstraeten@mambourg-charleroi.be
www.mambourg-charleroi.be/net
[Site du Mambourg] [Forum de discussion]
Hors ligne
#247 Le 15/11/2009, à 20:10
- nico_co
Re : ForeRunner et autre GPs Sportif
dans la doc sur les GPS il est question de créer la regle pour udev
Il faut ensuite créer en mode administrateur le fichier /etc/udev/rules.d/51-garmin.rules et y ajouter
SYSFS{idVendor}=="091e", SYSFS{idProduct}=="0003", MODE="666"
Ceci permet permet d'accéder au gps garmin (usb 091e:0003 ) sans privilège "root"
;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#248 Le 15/11/2009, à 21:23
- Sebulba
Re : ForeRunner et autre GPs Sportif
Merci Nico, ça fonctionne mais le soft plante quelque temps après ouverture, et ce, après téléchargement des traces.
Il semble que ce soit quand je clique sur un onglet.
J'ai réinstallé ton soft et Gpsbabel.
sebulba@sebulba-laptop:~$ /usr/bin/GPS-Sport-Trace.gambas
kbuildsycoca running...
Reusing existing ksycoca
DCOP Cleaning up dead connections.
Chargement de /home/sebulba/Documents/GPS_Sport_Trace/waypoint.pt en cours0
Chargement /home/sebulba/Documents/GPS_Sport_Trace/waypoint.pt en :0,852215953753
gpsbabel -t -i garmin -f usb: -o kml -F ~/gpssporttrace.kml > ~/gpsbabel.debug
ajout trace 2009-09-17T17:05:24
ajout trace 2009-09-24T16:39:13
ajout trace 2009-09-26T12:45:22
ajout trace 2009-09-26T12:59:17
ajout trace 2009-09-26T13:07:39
ajout trace 2009-09-29T15:31:48
ajout trace 2009-10-07T16:38:34
ajout trace 2009-10-11T08:12:04
ajout trace 2009-10-15T15:51:41
ajout trace 2009-11-15T12:38:57
Ecriture ~/.GpsSportTraceGMaps.html en :0,498076953809
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
Erreur de segmentation
sebulba@sebulba-laptop:~$ QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
sebulba@sebulba-laptop:~$Pascal Verstraeten
pascal.verstraeten@mambourg-charleroi.be
www.mambourg-charleroi.be/net
[Site du Mambourg] [Forum de discussion]
Hors ligne
#249 Le 15/11/2009, à 22:53
- nico_co
Re : ForeRunner et autre GPs Sportif
Ok comme dab tu me fais parvenir un fichier .kml de tes trace
gpsbabel -t -i garmin -f usb: -o kml -F output.kmlsurement une trace qui pose problème
Dernière modification par nico_co (Le 25/11/2009, à 20:51)
;) Nico
Linux User : 486012
Ubuntu User : 26381
Hors ligne
#250 Le 21/11/2009, à 16:43
- chois
Re : ForeRunner et autre GPs Sportif
Merci pour ce soft!
Je voudrais utiliser mes propres cartes (en fait, des cartes de courses d'orientation) pour afficher mes traces par dessus.
Je n'ai pas compris comment faire pour importer mes cartes (scannées, au format jpg ou png, ou autre). Est-ce que GPS-Sport-trace est capable de faire ça ?
François
Hors ligne