#26 Le 02/05/2010, à 19:25
- grandtoubab
Re : Lucid : Démarrage encore plus lent qu'avant ?
tout est là
http://ubuntuforums.org/showthread.php?t=1434502
en gros faudrait défragmenter
on peut déja nettoyer car ayant upgradé j'avais toujours sreadahead
sudo apt-get --purge remove sreadaheadsudo apt-get --purge remove ureadaheadsudo apt-get install ureadahead@ubuntu-desktop:~$ sudo apt-get --purge remove sreadahead
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
sreadahead*
0 mis à jour, 0 nouvellement installés, 1 à enlever et 0 non mis à jour.
Après cette opération, 45,1ko d'espace disque seront libérés.
Souhaitez-vous continuer [O/n] ? o
(Lecture de la base de données... 237506 fichiers et répertoires déjà installés.)
Suppression de sreadahead ...
Purge des fichiers de configuration de sreadahead ...
@ubuntu-desktop:~$ sudo apt-get --purge remove ureadahead
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants seront ENLEVÉS :
ubuntu-minimal* ureadahead*
0 mis à jour, 0 nouvellement installés, 2 à enlever et 0 non mis à jour.
Après cette opération, 213ko d'espace disque seront libérés.
Souhaitez-vous continuer [O/n] ? o
(Lecture de la base de données... 237503 fichiers et répertoires déjà installés.)
Suppression de ubuntu-minimal ...
Suppression de ureadahead ...
Purge des fichiers de configuration de ureadahead ...
Traitement des actions différées (« triggers ») pour « man-db »...
@ubuntu-desktop:~$ sudo apt-get install ureadahead
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les NOUVEAUX paquets suivants seront installés :
ureadahead
0 mis à jour, 1 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 24,3ko dans les archives.
Après cette opération, 152ko d'espace disque supplémentaires seront utilisés.
Réception de : 1 http://archive.ubuntu.com/ubuntu/ lucid/main ureadahead 0.100.0-4.1 [24,3kB]
24,3ko réceptionnés en 0s (57,4ko/s)
Sélection du paquet ureadahead précédemment désélectionné.
(Lecture de la base de données... 237491 fichiers et répertoires déjà installés.)
Dépaquetage de ureadahead (à partir de .../ureadahead_0.100.0-4.1_i386.deb) ...
Traitement des actions différées (« triggers ») pour « man-db »...
Paramétrage de ureadahead (0.100.0-4.1)Edit du 3 mai: ne pas oublier de reinstaller aussi ubuntu-minimal
sudo apt-get install ubuntu-minimalDernière modification par grandtoubab (Le 03/05/2010, à 16:44)
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#27 Le 02/05/2010, à 20:04
- grandtoubab
Re : Lucid : Démarrage encore plus lent qu'avant ?
j'ai gagné 2 secondes 
0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.33-02063303-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #02063303 SMP Tue Apr 27 12:14:21 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable)
[ 0.000000] BIOS-e820: 0000000017fd0000 - 0000000017fdf000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000017fdf000 - 0000000018000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x17fd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF8000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000017fd0000 (usable)
[ 0.000000] modified: 0000000017fd0000 - 0000000017fdf000 (ACPI data)
[ 0.000000] modified: 0000000017fdf000 - 0000000018000000 (ACPI NVS)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000017fd0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0017c00000 page 2M
[ 0.000000] 0017c00000 - 0017fd0000 page 4k
[ 0.000000] kernel direct mapping tables up to 17fd0000 @ 15000-1a000
[ 0.000000] RAMDISK: 1182e000 - 1201bc1e
[ 0.000000] ACPI: RSDP 000f8500 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 17fd0000 00038 (v01 A M I OEMRSDT 06000602 MSFT 00000097)
[ 0.000000] ACPI: FACP 17fd0200 00081 (v01 A M I OEMFACP 06000602 MSFT 00000097)
[ 0.000000] ACPI: DSDT 17fd0400 04D48 (v01 410M1 410M1602 00000602 INTL 02002026)
[ 0.000000] ACPI: FACS 17fdf000 00040
[ 0.000000] ACPI: APIC 17fd0390 0006C (v01 A M I OEMAPIC 06000602 MSFT 00000097)
[ 0.000000] ACPI: SSDT 17fd5150 0007B (v01 OEM_ID OEMTBLID 00000001 INTL 02002026)
[ 0.000000] ACPI: OEMB 17fdf040 00040 (v01 A M I AMI_OEM 06000602 MSFT 00000097)
[ 0.000000] ACPI: MCFG 17fd51d0 0003C (v01 A M I OEMMCFG 06000602 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 383MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 17fd0000
[ 0.000000] low ram: 0 - 17fd0000
[ 0.000000] node 0 low ram: 00000000 - 17fd0000
[ 0.000000] node 0 bootmap 00016000 - 00018ffc
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 0017fd0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000100000 - 000090e65c] TEXT DATA BSS ==> [0000100000 - 000090e65c]
[ 0.000000] #3 [001182e000 - 001201bc1e] RAMDISK ==> [001182e000 - 001201bc1e]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000090f000 - 0000912189] BRK ==> [000090f000 - 0000912189]
[ 0.000000] #6 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
[ 0.000000] #8 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
[ 0.000000] #9 [0000016000 - 0000019000] BOOTMAP ==> [0000016000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00017fd0
[ 0.000000] HighMem 0x00017fd0 -> 0x00017fd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00017fd0
[ 0.000000] On node 0 totalpages: 98143
[ 0.000000] free_area_init_node: node 0, pgdat c07be280, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 93424 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e6e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36184 r0 d21160 u1048576
[ 0.000000] pcpu-alloc: s36184 r0 d21160 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97375
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-02063303-generic root=UUID=ae02ece1-192f-4996-8067-144aaa760f93 ro quiet quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1964800 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 370008k/393024k available (4733k kernel code, 22044k reserved, 2215k data, 708k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd87d0000 - 0xff7fe000 ( 624 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd7fd0000 ( 383 MB)
[ 0.000000] .init : 0xc07ca000 - 0xc087b000 ( 708 kB)
[ 0.000000] .data : 0xc059f54c - 0xc07c9208 (2215 kB)
[ 0.000000] .text : 0xc0100000 - 0xc059f54c (4733 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3059.283 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.56 BogoMIPS (lpj=12237132)
[ 0.004031] Security Framework initialized
[ 0.004039] SELinux: Disabled at boot.
[ 0.004050] Mount-cache hash table entries: 512
[ 0.005121] Initializing cgroup subsys ns
[ 0.005128] Initializing cgroup subsys cpuacct
[ 0.005135] Initializing cgroup subsys memory
[ 0.005147] Initializing cgroup subsys devices
[ 0.005151] Initializing cgroup subsys freezer
[ 0.005154] Initializing cgroup subsys net_cls
[ 0.005189] CPU: Physical Processor ID: 0
[ 0.005192] CPU: Processor Core ID: 0
[ 0.005198] mce: CPU supports 4 MCE banks
[ 0.005212] CPU0: Thermal monitoring enabled (TM2)
[ 0.005219] using mwait in idle threads.
[ 0.005229] Performance Events: no PMU driver, software events only.
[ 0.005238] Checking 'hlt' instruction... OK.
[ 0.025061] ACPI: Core revision 20091214
[ 0.040014] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040023] ftrace: allocating 25678 entries in 51 pages
[ 0.044102] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044986] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086781] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 0.088000] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.180000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.180000] Measured 1035819800 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.180000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.180034] Brought up 2 CPUs
[ 0.180040] Total of 2 processors activated (12237.06 BogoMIPS).
[ 0.180762] devtmpfs: initialized
[ 0.180762] regulator: core version 0.5
[ 0.180762] Time: 19:00:47 Date: 05/02/10
[ 0.180762] NET: Registered protocol family 16
[ 0.180762] EISA bus registered
[ 0.180762] ACPI: bus type pci registered
[ 0.180762] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.180762] PCI: not using MMCONFIG
[ 0.180762] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.180762] PCI: Using configuration type 1 for base access
[ 0.181645] bio: create slab <bio-0> at 0
[ 0.185198] ACPI: EC: Look up EC in DSDT
[ 0.195467] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.211274] ACPI: Interpreter enabled
[ 0.211282] ACPI: (supports S0 S3 S4 S5)
[ 0.211315] ACPI: Using IOAPIC for interrupt routing
[ 0.211516] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.226306] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.226310] PCI: Using MMCONFIG for extended config space
[ 0.245708] ACPI Warning: Incorrect checksum in table [OEMB] - 20, should be 11 (20091214/tbutils-314)
[ 0.245902] ACPI: No dock devices found.
[ 0.246076] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.246114] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
[ 0.246418] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.246422] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.246425] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.246429] pci_root PNP0A03:00: host bridge window [mem 0x18000000-0xffffffff] (ignored)
[ 0.246473] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.246718] pci 0000:00:1c.0: reg 10: [mem 0xff6ff000-0xff6fffff]
[ 0.246805] pci 0000:00:1c.1: reg 10: [mem 0xff6fe000-0xff6fefff]
[ 0.246893] pci 0000:00:1c.2: reg 10: [mem 0xff6fd000-0xff6fdfff]
[ 0.247001] pci 0000:00:1c.3: reg 10: [mem 0xff6fcc00-0xff6fccff]
[ 0.247088] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.247095] pci 0000:00:1c.3: PME# disabled
[ 0.247165] pci 0000:00:1d.0: reg 10: [mem 0xff6f8000-0xff6fbfff 64bit]
[ 0.247235] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.247241] pci 0000:00:1d.0: PME# disabled
[ 0.247439] pci 0000:00:1e.1: quirk: [io 0x4000-0x403f] claimed by ali7101 ACPI
[ 0.247539] pci 0000:00:1f.0: reg 20: [io 0xff00-0xff0f]
[ 0.247636] pci 0000:00:1f.1: reg 10: [io 0xec00-0xec0f]
[ 0.247647] pci 0000:00:1f.1: reg 14: [io 0xe800-0xe807]
[ 0.247657] pci 0000:00:1f.1: reg 18: [io 0xe400-0xe40f]
[ 0.247668] pci 0000:00:1f.1: reg 1c: [io 0xe000-0xe007]
[ 0.247679] pci 0000:00:1f.1: reg 20: [io 0xdc00-0xdc1f]
[ 0.247689] pci 0000:00:1f.1: reg 24: [mem 0xff6fc800-0xff6fcbff]
[ 0.247729] pci 0000:00:1f.1: PME# supported from D3hot
[ 0.247735] pci 0000:00:1f.1: PME# disabled
[ 0.247799] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.247807] pci 0000:01:05.0: reg 14: [io 0xb800-0xb8ff]
[ 0.247814] pci 0000:01:05.0: reg 18: [mem 0xff4f0000-0xff4fffff]
[ 0.247833] pci 0000:01:05.0: reg 30: [mem 0xff4c0000-0xff4dffff pref]
[ 0.247855] pci 0000:01:05.0: supports D1 D2
[ 0.247890] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.247897] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.247902] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.247907] pci 0000:00:01.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.248045] pci 0000:02:15.0: reg 10: [mem 0xff5fc000-0xff5fffff]
[ 0.248058] pci 0000:02:15.0: reg 14: [io 0xc800-0xc8ff]
[ 0.248108] pci 0000:02:15.0: reg 30: [mem 0xff5c0000-0xff5dffff pref]
[ 0.248155] pci 0000:02:15.0: supports D1 D2
[ 0.248158] pci 0000:02:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.248165] pci 0000:02:15.0: PME# disabled
[ 0.248227] pci 0000:02:16.0: reg 10: [mem 0xff5fb800-0xff5fbfff]
[ 0.248240] pci 0000:02:16.0: reg 14: [io 0xcc00-0xcc7f]
[ 0.248324] pci 0000:02:16.0: supports D2
[ 0.248327] pci 0000:02:16.0: PME# supported from D2 D3hot D3cold
[ 0.248334] pci 0000:02:16.0: PME# disabled
[ 0.248369] pci 0000:00:19.0: PCI bridge to [bus 02-02]
[ 0.248376] pci 0000:00:19.0: bridge window [io 0xc000-0xcfff]
[ 0.248382] pci 0000:00:19.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.248404] pci_bus 0000:00: on NUMA node 0
[ 0.248410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.248537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.248647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
[ 0.263583] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
[ 0.263861] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.264149] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.264425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.264697] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.264970] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.265244] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.265515] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.265787] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.265955] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.265962] vgaarb: loaded
[ 0.266132] SCSI subsystem initialized
[ 0.266196] libata version 3.00 loaded.
[ 0.266196] usbcore: registered new interface driver usbfs
[ 0.266196] usbcore: registered new interface driver hub
[ 0.266196] usbcore: registered new device driver usb
[ 0.266196] ACPI: WMI: Mapper loaded
[ 0.266196] PCI: Using ACPI for IRQ routing
[ 0.266196] PCI: pci_cache_line_size set to 64 bytes
[ 0.266196] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] already in use
[ 0.266196] pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit]
[ 0.266196] NetLabel: Initializing
[ 0.266196] NetLabel: domain hash size = 128
[ 0.266196] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.266196] NetLabel: unlabeled traffic allowed by default
[ 0.270082] pnp: PnP ACPI init
[ 0.270103] ACPI: bus type pnp registered
[ 0.282854] pnp 00:0f: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.282860] pnp 00:0f: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.282866] pnp 00:0f: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.282871] pnp 00:0f: disabling [mem 0x00100000-0x17ffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.283457] pnp: PnP ACPI: found 16 devices
[ 0.283461] ACPI: ACPI bus type pnp unregistered
[ 0.283466] PnPBIOS: Disabled by ACPI PNP
[ 0.283489] system 00:0b: [io 0x0a00-0x0a0f] has been reserved
[ 0.283493] system 00:0b: [io 0x0a10-0x0a1f] has been reserved
[ 0.283497] system 00:0b: [io 0x0a20-0x0a2f] has been reserved
[ 0.283501] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 0.283510] system 00:0c: [io 0x028d-0x028e] has been reserved
[ 0.283514] system 00:0c: [io 0x0480-0x048f] has been reserved
[ 0.283518] system 00:0c: [io 0x04d0-0x04d1] has been reserved
[ 0.283523] system 00:0c: [mem 0xff380000-0xff3fffff] has been reserved
[ 0.283527] system 00:0c: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.283531] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.283535] system 00:0c: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.283539] system 00:0c: [mem 0xff780000-0xff7fffff] has been reserved
[ 0.283548] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.283552] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.283560] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.318368] Switching to clocksource acpi_pm
[ 0.318452] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.318452] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.318452] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.318452] pci 0000:00:01.0: bridge window [mem 0xbff00000-0xdfefffff pref]
[ 0.318452] pci 0000:00:19.0: PCI bridge to [bus 02-02]
[ 0.318452] pci 0000:00:19.0: bridge window [io 0xc000-0xcfff]
[ 0.318452] pci 0000:00:19.0: bridge window [mem 0xff500000-0xff5fffff]
[ 0.318452] pci 0000:00:19.0: bridge window [mem pref disabled]
[ 0.318452] pci 0000:00:19.0: setting latency timer to 64
[ 0.318452] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.318452] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.318452] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.318452] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.318452] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff pref]
[ 0.318452] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.318452] pci_bus 0000:02: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.318452] NET: Registered protocol family 2
[ 0.318452] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.318452] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.318452] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.318452] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.318452] TCP reno registered
[ 0.318452] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.318452] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.318452] NET: Registered protocol family 1
[ 0.318452] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.318452] pci 0000:00:19.0: Disabling HT MSI Mapping
[ 0.788108] PCI: CLS mismatch (64 != 512), using 64 bytes
[ 0.788115] pci 0000:01:05.0: Boot video device
[ 0.788199] Trying to unpack rootfs image as initramfs...
[ 1.082219] Freeing initrd memory: 8119k freed
[ 1.092745] cpufreq-nforce2: No nForce2 chipset.
[ 1.092788] Scanning for low memory corruption every 60 seconds
[ 1.092988] audit: initializing netlink socket (disabled)
[ 1.093013] type=2000 audit(1272826847.092:1): initialized
[ 1.103730] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.105705] VFS: Disk quotas dquot_6.5.2
[ 1.105782] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.106609] fuse init (API version 7.13)
[ 1.106737] msgmni has been set to 739
[ 1.107113] alg: No test for stdrng (krng)
[ 1.107206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.107211] io scheduler noop registered
[ 1.107214] io scheduler deadline registered
[ 1.107300] io scheduler cfq registered (default)
[ 1.107473] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.107507] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.107714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.107720] ACPI: Power Button [PWRB]
[ 1.107791] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.107796] ACPI: Power Button [PWRF]
[ 1.118047] isapnp: Scanning for PnP cards...
[ 1.473204] isapnp: No Plug & Play device found
[ 1.475309] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.475483] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.475637] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.476143] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.476361] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.478083] brd: module loaded
[ 1.478789] loop: module loaded
[ 1.478929] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.479137] alloc irq_desc for 21 on node -1
[ 1.479141] alloc kstat_irqs on node -1
[ 1.479153] pata_acpi 0000:00:1f.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.479234] pata_acpi 0000:00:1f.0: PCI INT A disabled
[ 1.479681] Fixed MDIO Bus: probed
[ 1.479730] PPP generic driver version 2.4.2
[ 1.479792] tun: Universal TUN/TAP device driver, 1.6
[ 1.479795] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.479911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.479938] alloc irq_desc for 23 on node -1
[ 1.479941] alloc kstat_irqs on node -1
[ 1.479948] ehci_hcd 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.479975] ehci_hcd 0000:00:1c.3: EHCI Host Controller
[ 1.480033] ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 1
[ 1.480079] ehci_hcd 0000:00:1c.3: debug port 1
[ 1.500070] ehci_hcd 0000:00:1c.3: irq 23, io mem 0xff6fcc00
[ 1.512032] ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00
[ 1.512204] hub 1-0:1.0: USB hub found
[ 1.512211] hub 1-0:1.0: 8 ports detected
[ 1.512317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.512336] alloc irq_desc for 17 on node -1
[ 1.512339] alloc kstat_irqs on node -1
[ 1.512346] ohci_hcd 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.512362] ohci_hcd 0000:00:1c.0: OHCI Host Controller
[ 1.512417] ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 2
[ 1.512458] ohci_hcd 0000:00:1c.0: irq 17, io mem 0xff6ff000
[ 1.570165] hub 2-0:1.0: USB hub found
[ 1.570175] hub 2-0:1.0: 3 ports detected
[ 1.570242] alloc irq_desc for 18 on node -1
[ 1.570245] alloc kstat_irqs on node -1
[ 1.570252] ohci_hcd 0000:00:1c.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.570266] ohci_hcd 0000:00:1c.1: OHCI Host Controller
[ 1.570313] ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 3
[ 1.570355] ohci_hcd 0000:00:1c.1: irq 18, io mem 0xff6fe000
[ 1.626159] hub 3-0:1.0: USB hub found
[ 1.626172] hub 3-0:1.0: 3 ports detected
[ 1.626239] alloc irq_desc for 19 on node -1
[ 1.626242] alloc kstat_irqs on node -1
[ 1.626249] ohci_hcd 0000:00:1c.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.626263] ohci_hcd 0000:00:1c.2: OHCI Host Controller
[ 1.626319] ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 4
[ 1.626360] ohci_hcd 0000:00:1c.2: irq 19, io mem 0xff6fd000
[ 1.682176] hub 4-0:1.0: USB hub found
[ 1.682186] hub 4-0:1.0: 3 ports detected
[ 1.682256] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.682378] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.684991] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.685002] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.685177] mice: PS/2 mouse device common for all mice
[ 1.685355] rtc_cmos 00:02: RTC can wake from S4
[ 1.685409] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.685457] rtc0: alarms up to one month, 114 bytes nvram
[ 1.685599] device-mapper: uevent: version 1.0.3
[ 1.685789] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.685932] device-mapper: multipath: version 1.1.1 loaded
[ 1.685936] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.686114] EISA: Probing bus 0 at eisa.0
[ 1.686143] Cannot allocate resource for EISA slot 4
[ 1.686170] EISA: Detected 0 cards.
[ 1.686352] cpuidle: using governor ladder
[ 1.686356] cpuidle: using governor menu
[ 1.686881] TCP cubic registered
[ 1.687049] NET: Registered protocol family 10
[ 1.687683] lo: Disabled Privacy Extensions
[ 1.688085] NET: Registered protocol family 17
[ 1.688179] Using IPI No-Shortcut mode
[ 1.688297] PM: Resume from disk failed.
[ 1.688316] registered taskstats version 1
[ 1.688604] Magic number: 10:120:40
[ 1.688617] bdi 7:5: hash matches
[ 1.688657] system 00:0c: hash matches
[ 1.688744] rtc_cmos 00:02: setting system clock to 2010-05-02 19:00:48 UTC (1272826848)
[ 1.688749] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.688751] EDD information not available.
[ 1.688819] Freeing unused kernel memory: 708k freed
[ 1.689657] Write protecting the kernel text: 4736k
[ 1.689719] Write protecting the kernel read-only data: 1924k
[ 1.710918] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.714344] udev: starting version 151
[ 1.845392] pata_ali 0000:00:1f.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.874566] scsi0 : pata_ali
[ 1.893964] scsi1 : pata_ali
[ 1.898605] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.898615] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.898902] sata_uli 0000:00:1f.1: version 1.3
[ 1.898938] sata_uli 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.926904] alloc irq_desc for 20 on node -1
[ 1.926915] alloc kstat_irqs on node -1
[ 1.926936] skge 0000:02:15.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.927036] skge 1.13 addr 0xff5fc000 irq 20 chip Yukon-Lite rev 9
[ 1.928458] skge eth0: addr 00:16:ec:9f:83:9a
[ 1.937066] scsi2 : sata_uli
[ 1.938914] scsi3 : sata_uli
[ 1.939107] scsi4 : sata_uli
[ 1.939232] scsi5 : sata_uli
[ 1.939339] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 21
[ 1.939349] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 21
[ 1.939356] ata5: SATA max UDMA/133 cmd 0xec08 ctl 0xe806 bmdma 0xdc10 cmd 0xe409 ctl 0xe006 bmdma 0xdc18 irq 21
[ 1.939366] ata6: SATA max UDMA/133 irq 21
[ 1.972656] FDC 0 is a post-1991 82077
[ 2.060056] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 2.076429] ata1.00: ATAPI: LITE-ON DVDRW SHW-160P6S, PRS2, max UDMA/66
[ 2.076461] ata1.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 2.076464] ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 2.108366] ata1.00: configured for UDMA/66
[ 2.109897] scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SHW-160P6S PRS2 PQ: 0 ANSI: 5
[ 2.114421] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.114426] Uniform CD-ROM driver Revision: 3.20
[ 2.114617] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.114758] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.287153] Initializing USB Mass Storage driver...
[ 2.287407] scsi6 : usb-storage 4-1:1.0
[ 2.287592] usbcore: registered new interface driver usb-storage
[ 2.287597] USB Mass Storage support registered.
[ 2.404105] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.412603] ata3.00: ATA-7: WDC WD1600JS-22NCB1, 10.02E02, max UDMA/133
[ 2.412608] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.420617] ata3.00: configured for UDMA/133
[ 2.420789] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-22N 10.0 PQ: 0 ANSI: 5
[ 2.421116] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.421131] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.421314] sd 2:0:0:0: [sda] Write Protect is off
[ 2.421321] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.421382] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.421667] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.461253] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.362459] ohci1394 0000:02:16.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.418562] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23] MMIO=[ff5fb800-ff5fbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.096490] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 4.692323] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000ae6ff55c3b8]
[ 5.619819] Adding 1020088k swap on /dev/sda5. Priority:-1 extents:1 across:1020088k
[ 6.102241] udev: starting version 151
[ 7.296176] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 7.303179] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 7.310177] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 7.317177] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 7.319018] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.328726] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 7.329359] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 7.330508] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 7.362205] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.494167] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 7.539991] parport_pc 00:0a: reported by Plug and Play ACPI
[ 7.540141] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 7.582179] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 7.593167] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 7.599176] ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS?
[ 7.599183] ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
[ 7.675515] ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 7.675612] ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted.
[ 7.702796] lp0: using parport0 (interrupt-driven).
[ 7.730319] Linux agpgart interface v0.103
[ 7.746082] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.759694] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.811447] ppdev: user-space parallel port driver
[ 7.939693] psmouse serio1: ID: 10 00 64
[ 7.967294] nf_conntrack version 0.5.0 (5927 buckets, 23708 max)
[ 7.967709] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 7.967715] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 7.967719] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 8.313651] [drm] Initialized drm 1.1.0 20060810
[ 8.506073] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 8.545603] it87: Found IT8712F chip at 0xa10, revision 7
[ 8.545629] it87: in3 is VCC (+5V)
[ 8.545633] it87: in7 is VCCH (+5V Stand-By)
[ 8.747973] [drm] radeon defaulting to kernel modesetting.
[ 8.747980] [drm] radeon kernel modesetting enabled.
[ 8.748073] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.751146] [drm] radeon: Initializing kernel modesetting.
[ 8.751367] [drm] register mmio base: 0xFF4F0000
[ 8.751371] [drm] register mmio size: 65536
[ 8.754262] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 8.754283] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[ 8.754353] [drm] Generation 2 PCI interface, using max accessible memory
[ 8.754357] [drm] radeon: VRAM 128M
[ 8.754360] [drm] radeon: VRAM from 0x18000000 to 0x1FFFFFFF
[ 8.754362] [drm] radeon: GTT 32M
[ 8.754365] [drm] radeon: GTT from 0x20000000 to 0x21FFFFFF
[ 8.754398] [drm] radeon: irq initialized.
[ 8.754939] [drm] Detected VRAM RAM=128M, BAR=256M
[ 8.754946] [drm] RAM width 128bits DDR
[ 8.755089] [TTM] Zone kernel: Available graphics memory: 189678 kiB.
[ 8.755115] [drm] radeon: 128M of VRAM memory ready
[ 8.755118] [drm] radeon: 32M of GTT memory ready.
[ 8.755142] [drm] GART: num cpu pages 8192, num gpu pages 8192
[ 8.757061] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 8.757080] [drm] radeon: cp idle (0x10000C03)
[ 8.757153] [drm] Loading R300 Microcode
[ 8.757292] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 9.012435] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.244306] [drm] radeon: ring at 0x0000000020000000
[ 9.244337] [drm] ring test succeeded in 0 usecs
[ 9.244678] [drm] radeon: ib pool ready.
[ 9.244833] [drm] ib test succeeded in 0 usecs
[ 9.244897] [drm] Default TV standard: NTSC
[ 9.244901] [drm] 14.318180000 MHz TV ref clk
[ 9.245065] [drm] Default TV standard: NTSC
[ 9.245069] [drm] 14.318180000 MHz TV ref clk
[ 9.245125] [drm] Radeon Display Connectors
[ 9.245130] [drm] Connector 0:
[ 9.245133] [drm] VGA
[ 9.245138] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 9.245142] [drm] Encoders:
[ 9.245145] [drm] CRT1: INTERNAL_DAC2
[ 9.245148] [drm] Connector 1:
[ 9.245151] [drm] S-video
[ 9.245154] [drm] Encoders:
[ 9.245157] [drm] TV1: INTERNAL_DAC2
[ 9.330272] alloc irq_desc for 22 on node -1
[ 9.330279] alloc kstat_irqs on node -1
[ 9.330292] HDA Intel 0000:00:1d.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 9.355850] [drm] fb mappable at 0xC0040000
[ 9.355854] [drm] vram apper at 0xC0000000
[ 9.355857] [drm] size 5184000
[ 9.355859] [drm] fb depth is 24
[ 9.355861] [drm] pitch is 5760
[ 9.356113] fb0: radeondrmfb frame buffer device
[ 9.356117] registered panic notifier
[ 9.356126] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 9.471523] hda_codec: ALC880: BIOS auto-probing.
[ 9.473258] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1d.0/input/input5
[ 9.725617] Console: switching to colour frame buffer device 180x56
[ 13.570034] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 15.904430] skge eth0: enabling interface
[ 15.907951] ADDRCONF(NETDEV_UP): eth0: link is not readyLinux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#28 Le 02/05/2010, à 20:35
- Tripack
Re : Lucid : Démarrage encore plus lent qu'avant ?
J'ai tapé tes commandes grandtoubab du coup cela m'a fait disk error on m'a demandé de tapé C....je suis passé à 47 secondes au lieu de 19 s....J'ai redémarre 18 secondes...??????
Ubuntu 12.04 LTS Linux mint Kathia
Groove Salad: a nicely chilled plate of ambient
Hors ligne
#29 Le 02/05/2010, à 22:31
- syrthes
Re : Lucid : Démarrage encore plus lent qu'avant ?
Salut,
plutôt fructeux cette astuce puisque je suis passé de 24 secondes (ou plus parfois) à 14.67 secondes. Je vais suivre cela de près lors des prochains démarrages
Hors ligne
#30 Le 02/05/2010, à 22:33
- Tripack
Re : Lucid : Démarrage encore plus lent qu'avant ?
Je suis passé à 15 secondes en nettoyant avec la dernière version de ubuntu tweak pour lucid
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
[ 0.000000] BIOS-e820: 000000004fff0000 - 000000004fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004fff8000 - 0000000050000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x4fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FF0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000004fff0000 (usable)
[ 0.000000] modified: 000000004fff0000 - 000000004fff8000 (ACPI data)
[ 0.000000] modified: 000000004fff8000 - 0000000050000000 (ACPI NVS)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37858000 - 37feff67
[ 0.000000] Allocated new RAMDISK: 008de000 - 01075f67
[ 0.000000] Move RAMDISK from 0000000037858000 - 0000000037feff66 to 008de000 - 01075f66
[ 0.000000] ACPI: RSDP 000fa8b0 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 4fff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP 4fff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT 4fff0120 03502 (v01 VIA K7VT4 00001000 INTL 02002024)
[ 0.000000] ACPI: FACS 4fff8000 00040
[ 0.000000] ACPI: APIC 4fff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 391MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd095] BRK ==> [00008da000 - 00008dd095]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008de000 - 0001075f67] NEW RAMDISK ==> [00008de000 - 0001075f67]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0004fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004fff0
[ 0.000000] On node 0 totalpages: 327551
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1077200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 784 pages used for memmap
[ 0.000000] HighMem zone: 99554 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 50000000:aec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u4194304
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 324991
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=d5661f4d-7d13-4651-aa40-efdbd4057a3c ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6552960 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0004fff0)
[ 0.000000] Memory: 1275820k/1310656k available (4673k kernel code, 33368k reserved, 2122k data, 656k init, 401352k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2015.309 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4030.61 BogoMIPS (lpj=8061236)
[ 0.004042] Security Framework initialized
[ 0.004098] AppArmor: AppArmor initialized
[ 0.004110] Mount-cache hash table entries: 512
[ 0.004341] Initializing cgroup subsys ns
[ 0.004348] Initializing cgroup subsys cpuacct
[ 0.004354] Initializing cgroup subsys memory
[ 0.004369] Initializing cgroup subsys devices
[ 0.004373] Initializing cgroup subsys freezer
[ 0.004377] Initializing cgroup subsys net_cls
[ 0.004409] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004413] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004421] mce: CPU supports 4 MCE banks
[ 0.004455] Performance Events: AMD PMU driver.
[ 0.004465] ... version: 0
[ 0.004467] ... bit width: 48
[ 0.004469] ... generic registers: 4
[ 0.004471] ... value mask: 0000ffffffffffff
[ 0.004474] ... max period: 00007fffffffffff
[ 0.004476] ... fixed-purpose events: 0
[ 0.004478] ... event mask: 000000000000000f
[ 0.004485] Checking 'hlt' instruction... OK.
[ 0.020781] SMP alternatives: switching to UP code
[ 0.027783] Freeing SMP alternatives: 19k freed
[ 0.027828] ACPI: Core revision 20090903
[ 0.035926] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.035939] ftrace: allocating 21771 entries in 43 pages
[ 0.040207] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.045077] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084865] CPU0: AMD Sempron(tm) 3000+ stepping 00
[ 0.088001] Brought up 1 CPUs
[ 0.088001] Total of 1 processors activated (4030.61 BogoMIPS).
[ 0.088001] CPU0 attaching NULL sched-domain.
[ 0.088001] devtmpfs: initialized
[ 0.088001] regulator: core version 0.5
[ 0.088001] Time: 21:27:40 Date: 05/02/10
[ 0.088001] NET: Registered protocol family 16
[ 0.088001] EISA bus registered
[ 0.088001] ACPI: bus type pci registered
[ 0.089055] PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
[ 0.089059] PCI: Using configuration type 1 for base access
[ 0.090116] bio: create slab <bio-0> at 0
[ 0.090737] ACPI: EC: Look up EC in DSDT
[ 0.096530] ACPI: Interpreter enabled
[ 0.096538] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.096566] ACPI: Using IOAPIC for interrupt routing
[ 0.101297] ACPI: Power Resource [URP1] (off)
[ 0.101331] ACPI: Power Resource [URP2] (off)
[ 0.101363] ACPI: Power Resource [FDDP] (off)
[ 0.101395] ACPI: Power Resource [LPTP] (off)
[ 0.101544] ACPI: No dock devices found.
[ 0.101699] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.101758] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]
[ 0.101847] pci 0000:00:01.0: supports D1
[ 0.101892] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
[ 0.101899] pci 0000:00:0f.0: reg 14 io port: [0xe800-0xe803]
[ 0.101906] pci 0000:00:0f.0: reg 18 io port: [0xe400-0xe407]
[ 0.101913] pci 0000:00:0f.0: reg 1c io port: [0xe000-0xe003]
[ 0.101919] pci 0000:00:0f.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.101926] pci 0000:00:0f.0: reg 24 io port: [0xd800-0xd8ff]
[ 0.101992] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.102066] pci 0000:00:10.0: reg 20 io port: [0xc800-0xc81f]
[ 0.102089] pci 0000:00:10.0: supports D1 D2
[ 0.102092] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102097] pci 0000:00:10.0: PME# disabled
[ 0.102142] pci 0000:00:10.1: reg 20 io port: [0xcc00-0xcc1f]
[ 0.102165] pci 0000:00:10.1: supports D1 D2
[ 0.102167] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102171] pci 0000:00:10.1: PME# disabled
[ 0.102219] pci 0000:00:10.2: reg 20 io port: [0xd000-0xd01f]
[ 0.102243] pci 0000:00:10.2: supports D1 D2
[ 0.102245] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102249] pci 0000:00:10.2: PME# disabled
[ 0.102294] pci 0000:00:10.3: reg 20 io port: [0xd400-0xd41f]
[ 0.102317] pci 0000:00:10.3: supports D1 D2
[ 0.102320] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102324] pci 0000:00:10.3: PME# disabled
[ 0.102355] pci 0000:00:10.4: reg 10 32bit mmio: [0xdfffbe00-0xdfffbeff]
[ 0.102393] pci 0000:00:10.4: supports D1 D2
[ 0.102395] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102399] pci 0000:00:10.4: PME# disabled
[ 0.102458] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.102509] pci 0000:00:11.5: reg 10 io port: [0xc400-0xc4ff]
[ 0.102548] pci 0000:00:11.5: supports D1 D2
[ 0.102582] pci 0000:00:12.0: reg 10 io port: [0xc000-0xc0ff]
[ 0.102589] pci 0000:00:12.0: reg 14 32bit mmio: [0xdfffbd00-0xdfffbdff]
[ 0.102624] pci 0000:00:12.0: supports D1 D2
[ 0.102627] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.102631] pci 0000:00:12.0: PME# disabled
[ 0.102681] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
[ 0.102686] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.102703] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfee0000-0xdfefffff]
[ 0.102749] pci 0000:00:01.0: bridge 32bit mmio: [0xdde00000-0xdfefffff]
[ 0.102755] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcdd00000-0xddcfffff]
[ 0.102762] pci_bus 0000:00: on NUMA node 0
[ 0.102767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.117245] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.117354] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.117461] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.117567] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.117673] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.117780] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.117886] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.117993] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.118125] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.118129] vgaarb: loaded
[ 0.118303] SCSI subsystem initialized
[ 0.118421] libata version 3.00 loaded.
[ 0.118529] usbcore: registered new interface driver usbfs
[ 0.118555] usbcore: registered new interface driver hub
[ 0.118596] usbcore: registered new device driver usb
[ 0.118767] ACPI: WMI: Mapper loaded
[ 0.118769] PCI: Using ACPI for IRQ routing
[ 0.118942] NetLabel: Initializing
[ 0.118945] NetLabel: domain hash size = 128
[ 0.118947] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.118968] NetLabel: unlabeled traffic allowed by default
[ 0.119020] Switching to clocksource tsc
[ 0.120001] AppArmor: AppArmor Filesystem Enabled
[ 0.120001] pnp: PnP ACPI init
[ 0.120001] ACPI: bus type pnp registered
[ 0.122150] pnp: PnP ACPI: found 12 devices
[ 0.122153] ACPI: ACPI bus type pnp unregistered
[ 0.122159] PnPBIOS: Disabled by ACPI PNP
[ 0.122181] system 00:05: ioport range 0x295-0x296 has been reserved
[ 0.122184] system 00:05: ioport range 0x3f0-0x3f1 has been reserved
[ 0.122188] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.122192] system 00:05: ioport range 0x400-0x40f has been reserved
[ 0.122195] system 00:05: ioport range 0x800-0x87f has been reserved
[ 0.122200] system 00:05: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.122204] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.156972] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.156975] pci 0000:00:01.0: IO window: disabled
[ 0.156981] pci 0000:00:01.0: MEM window: 0xdde00000-0xdfefffff
[ 0.156986] pci 0000:00:01.0: PREFETCH window: 0xcdd00000-0xddcfffff
[ 0.157006] pci 0000:00:01.0: setting latency timer to 64
[ 0.157012] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.157016] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.157019] pci_bus 0000:01: resource 1 mem: [0xdde00000-0xdfefffff]
[ 0.157023] pci_bus 0000:01: resource 2 pref mem [0xcdd00000-0xddcfffff]
[ 0.157077] NET: Registered protocol family 2
[ 0.157202] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.157803] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.160025] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.161224] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.161228] TCP reno registered
[ 0.161398] NET: Registered protocol family 1
[ 0.161424] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.161517] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.161535] pci 0000:01:00.0: Boot video device
[ 0.161881] cpufreq-nforce2: No nForce2 chipset.
[ 0.161920] Scanning for low memory corruption every 60 seconds
[ 0.162087] audit: initializing netlink socket (disabled)
[ 0.162107] type=2000 audit(1272835660.160:1): initialized
[ 0.171904] Trying to unpack rootfs image as initramfs...
[ 0.185106] highmem bounce pool size: 64 pages
[ 0.185118] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.187058] VFS: Disk quotas dquot_6.5.2
[ 0.187147] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.187869] fuse init (API version 7.13)
[ 0.187977] msgmni has been set to 1709
[ 0.193329] alg: No test for stdrng (krng)
[ 0.193450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.193455] io scheduler noop registered
[ 0.193458] io scheduler anticipatory registered
[ 0.193460] io scheduler deadline registered
[ 0.193524] io scheduler cfq registered (default)
[ 0.193693] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.193721] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.193874] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.193882] ACPI: Power Button [PWRB]
[ 0.193952] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.193963] ACPI: Sleep Button [SLPB]
[ 0.194024] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.194027] ACPI: Power Button [PWRF]
[ 0.194284] processor LNXCPU:00: registered as cooling_device0
[ 0.197943] isapnp: Scanning for PnP cards...
[ 0.209550] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.209664] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.209995] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.211375] brd: module loaded
[ 0.212004] loop: module loaded
[ 0.212129] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.212341] alloc irq_desc for 20 on node -1
[ 0.212344] alloc kstat_irqs on node -1
[ 0.212357] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.212458] pata_acpi 0000:00:0f.1: PCI INT A disabled
[ 0.212817] Fixed MDIO Bus: probed
[ 0.212859] PPP generic driver version 2.4.2
[ 0.212923] tun: Universal TUN/TAP device driver, 1.6
[ 0.212926] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.213064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.213085] alloc irq_desc for 21 on node -1
[ 0.213088] alloc kstat_irqs on node -1
[ 0.213093] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.213118] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.213159] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.213252] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdfffbe00
[ 0.256786] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.256929] usb usb1: configuration #1 chosen from 1 choice
[ 0.256985] hub 1-0:1.0: USB hub found
[ 0.257005] hub 1-0:1.0: 8 ports detected
[ 0.257081] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.257097] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.257133] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.257140] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.257188] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.257210] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c800
[ 0.257349] usb usb2: configuration #1 chosen from 1 choice
[ 0.257378] hub 2-0:1.0: USB hub found
[ 0.257393] hub 2-0:1.0: 2 ports detected
[ 0.257446] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.257453] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.257490] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.257511] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000cc00
[ 0.257641] usb usb3: configuration #1 chosen from 1 choice
[ 0.257670] hub 3-0:1.0: USB hub found
[ 0.257685] hub 3-0:1.0: 2 ports detected
[ 0.257735] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.257743] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.257785] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.257805] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
[ 0.257938] usb usb4: configuration #1 chosen from 1 choice
[ 0.257967] hub 4-0:1.0: USB hub found
[ 0.257987] hub 4-0:1.0: 2 ports detected
[ 0.258034] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.258041] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.258079] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.258100] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400
[ 0.258207] usb usb5: configuration #1 chosen from 1 choice
[ 0.258235] hub 5-0:1.0: USB hub found
[ 0.258249] hub 5-0:1.0: 2 ports detected
[ 0.258357] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.261249] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.261261] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.261452] mice: PS/2 mouse device common for all mice
[ 0.261642] rtc_cmos 00:07: RTC can wake from S4
[ 0.261720] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.261774] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.261916] device-mapper: uevent: version 1.0.3
[ 0.264372] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.264995] device-mapper: multipath: version 1.1.0 loaded
[ 0.265000] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.266302] EISA: Probing bus 0 at eisa.0
[ 0.266339] EISA: Detected 0 cards.
[ 0.268608] cpuidle: using governor ladder
[ 0.268611] cpuidle: using governor menu
[ 0.269173] TCP cubic registered
[ 0.269355] NET: Registered protocol family 10
[ 0.269885] lo: Disabled Privacy Extensions
[ 0.270232] NET: Registered protocol family 17
[ 0.270289] powernow-k8: Processor cpuid 6a0 not supported
[ 0.270328] Using IPI No-Shortcut mode
[ 0.270496] PM: Resume from disk failed.
[ 0.270521] registered taskstats version 1
[ 0.270800] Magic number: 10:297:499
[ 0.270823] misc pktcdvd: hash matches
[ 0.271005] rtc_cmos 00:07: setting system clock to 2010-05-02 21:27:41 UTC (1272835661)
[ 0.271010] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.271012] EDD information not available.
[ 0.278410] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.713242] Freeing initrd memory: 7775k freed
[ 0.816009] isapnp: No Plug & Play device found
[ 0.816040] Freeing unused kernel memory: 656k freed
[ 0.817620] Write protecting the kernel text: 4676k
[ 0.817655] Write protecting the kernel read-only data: 1840k
[ 0.844762] udev: starting version 151
[ 1.021184] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 1.074224] pata_via 0000:00:0f.1: version 0.3.4
[ 1.074248] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.074651] Floppy drive(s): fd0 is 1.44M
[ 1.091029] scsi0 : pata_via
[ 1.095128] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.099135] FDC 0 is a post-1991 82077
[ 1.108509] scsi1 : pata_via
[ 1.110738] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.110743] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.110928] sata_via 0000:00:0f.0: version 2.4
[ 1.110952] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.111031] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 1.121956] scsi2 : sata_via
[ 1.122847] scsi3 : sata_via
[ 1.122916] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[ 1.122920] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[ 1.123486] alloc irq_desc for 23 on node -1
[ 1.123489] alloc kstat_irqs on node -1
[ 1.123502] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.124367] eth0: VIA Rhine II at 0xdfffbd00, 00:13:8f:0a:13:3d, IRQ 23.
[ 1.125073] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 1.182370] usb 2-2: configuration #1 chosen from 1 choice
[ 1.328019] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.339079] ata1.00: ATA-6: ST3160023A, 8.01, max UDMA/100
[ 1.339083] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.352399] ata1.00: configured for UDMA/100
[ 1.352597] scsi 0:0:0:0: Direct-Access ATA ST3160023A 8.01 PQ: 0 ANSI: 5
[ 1.352858] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.353319] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.353384] sd 0:0:0:0: [sda] Write Protect is off
[ 1.353388] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.353421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.353614] sda: sda1 sda2 < sda5 sda6 >
[ 1.398693] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.424020] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.540361] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS05, max UDMA/33
[ 1.580238] ata2.00: configured for UDMA/33
[ 1.581544] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS05 PQ: 0 ANSI: 5
[ 1.589601] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.589606] Uniform CD-ROM driver Revision: 3.20
[ 1.589750] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.589848] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.612902] usb 4-1: configuration #1 chosen from 1 choice
[ 1.792041] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.121305] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.068678] Adding 1020088k swap on /dev/sda6. Priority:-1 extents:1 across:1020088k
[ 4.821672] udev: starting version 151
[ 6.403139] parport_pc 00:03: reported by Plug and Play ACPI
[ 6.403261] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 6.410759] gameport: NS558 PnP Gameport is pnp00:04/gameport0, io 0x200, speed 1028kHz
[ 6.492638] Bluetooth: Core ver 2.15
[ 6.492837] NET: Registered protocol family 31
[ 6.492839] Bluetooth: HCI device and connection manager initialized
[ 6.492845] Bluetooth: HCI socket layer initialized
[ 6.542204] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.560563] ppdev: user-space parallel port driver
[ 6.603364] lp0: using parport0 (interrupt-driven).
[ 6.616577] type=1505 audit(1272835667.844:2): operation="profile_load" pid=443 name="/sbin/dhclient3"
[ 6.616934] type=1505 audit(1272835667.844:3): operation="profile_load" pid=443 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 6.617140] type=1505 audit(1272835667.844:4): operation="profile_load" pid=443 name="/usr/lib/connman/scripts/dhclient-script"
[ 6.800108] Linux agpgart interface v0.103
[ 6.802239] Linux video capture interface: v2.00
[ 6.830367] gspca: main v2.7.0 registered
[ 6.841338] gspca: probing 045e:00f5
[ 6.850190] sonixj: Sonix chip id: 11
[ 6.852186] gspca: probe ok
[ 6.852211] gspca: probing 045e:00f5
[ 6.852226] gspca: probing 045e:00f5
[ 6.852254] usbcore: registered new interface driver sonixj
[ 6.852259] sonixj: registered
[ 6.882497] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.883201] usbcore: registered new interface driver btusb
[ 6.943755] vga16fb: initializing
[ 6.943763] vga16fb: mapped to 0xc00a0000
[ 6.944354] fb0: VGA16 VGA frame buffer device
[ 6.977756] psmouse serio1: ID: 10 00 64
[ 7.029598] logips2pp: Detected unknown logitech mouse model 127
[ 7.348345] nvidia: module license 'NVIDIA' taints kernel.
[ 7.348351] Disabling lock debugging due to kernel taint
[ 7.910911] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 8.183656] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 8.196940] alloc irq_desc for 16 on node -1
[ 8.196946] alloc kstat_irqs on node -1
[ 8.196958] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.199122] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009
[ 8.225370] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 8.254359] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.487449] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 8.489958] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 8.489966] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 8.489969] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 8.697848] Console: switching to colour frame buffer device 80x30
[ 9.165430] usbcore: registered new interface driver snd-usb-audio
[ 9.327856] alloc irq_desc for 22 on node -1
[ 9.327863] alloc kstat_irqs on node -1
[ 9.327876] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 9.328062] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 9.380486] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 10.010313] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.862641] type=1505 audit(1272835673.088:5): operation="profile_load" pid=808 name="/usr/share/gdm/guest-session/Xsession"
[ 11.865879] type=1505 audit(1272835673.092:6): operation="profile_replace" pid=811 name="/sbin/dhclient3"
[ 11.866273] type=1505 audit(1272835673.092:7): operation="profile_replace" pid=811 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.866481] type=1505 audit(1272835673.092:8): operation="profile_replace" pid=811 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.008842] type=1505 audit(1272835673.236:9): operation="profile_load" pid=812 name="/usr/bin/evince"
[ 12.014353] type=1505 audit(1272835673.240:10): operation="profile_load" pid=812 name="/usr/bin/evince-previewer"
[ 12.017739] type=1505 audit(1272835673.244:11): operation="profile_load" pid=812 name="/usr/bin/evince-thumbnailer"
[ 12.080917] type=1505 audit(1272835673.308:12): operation="profile_load" pid=817 name="/usr/lib/cups/backend/cups-pdf"
[ 12.081356] type=1505 audit(1272835673.308:13): operation="profile_load" pid=817 name="/usr/sbin/cupsd"
[ 12.210482] type=1505 audit(1272835673.439:14): operation="profile_load" pid=820 name="/usr/sbin/mysqld-akonadi"
[ 13.891030] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 14.834003] Bluetooth: L2CAP ver 2.14
[ 14.834009] Bluetooth: L2CAP socket layer initialized
[ 15.037579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.037585] Bluetooth: BNEP filters: protocol multicast
[ 15.105699] Bridge firewalling registeredUbuntu 12.04 LTS Linux mint Kathia
Groove Salad: a nicely chilled plate of ambient
Hors ligne
#31 Le 03/05/2010, à 08:54
- Emetryon
Re : Lucid : Démarrage encore plus lent qu'avant ?
Avant.
........etc etc .......
[ 25.251675] Registered led device: mmc0::
[ 25.251731] mmc0: SDHCI controller on PCI [0000:0a:03.1] using PIO
[ 25.288179] Linux video capture interface: v2.00
[ 25.305394] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183d)
[ 25.307053] input: UVC Camera (05ca:183d) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
[ 25.307140] usbcore: registered new interface driver uvcvideo
[ 25.307169] USB Video Class driver (v0.1.0)
[ 25.372207] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.622067] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input9
[ 25.645168] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input10
[ 25.660257] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 25.660712] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 25.660715] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 25.660716] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 25.841091] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 26.523055] alloc irq_desc for 22 on node -1
[ 26.523063] alloc kstat_irqs on node -1
[ 26.523076] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 26.523148] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 26.577137] type=1505 audit(1272870031.543:5): operation="profile_load" pid=1026 name="/usr/share/gdm/guest-session/Xsession"
[ 26.578490] type=1505 audit(1272870031.543:6): operation="profile_replace" pid=1027 name="/sbin/dhclient3"
[ 26.579052] type=1505 audit(1272870031.543:7): operation="profile_replace" pid=1027 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 26.579365] type=1505 audit(1272870031.543:8): operation="profile_replace" pid=1027 name="/usr/lib/connman/scripts/dhclient-script"
[ 26.582950] type=1505 audit(1272870031.553:9): operation="profile_load" pid=1030 name="/usr/bin/evince"
[ 26.590455] type=1505 audit(1272870031.563:10): operation="profile_load" pid=1030 name="/usr/bin/evince-previewer"
[ 26.595231] type=1505 audit(1272870031.563:11): operation="profile_load" pid=1030 name="/usr/bin/evince-thumbnailer"
[ 26.756849] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 26.765551] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 26.765622] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 27.278494] sky2 eth0: enabling interface
[ 27.278981] ADDRCONF(NETDEV_UP): eth0: link is not readyBof!!
Après manip "sudo apt-get --purge remove sreadahead" de grandtoubab et réinstallation des paquets Plymouth:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=535a2ba7-a06b-4913-b089-ff231026a62f ro vga=769 quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfda5000 (usable)
[ 0.000000] BIOS-e820: 00000000bfda5000 - 00000000bfdcc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdcc000 - 00000000bfddd000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfddd000 - 00000000bfdde000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdde000 - 00000000bfe04000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe04000 - 00000000bfe05000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfe05000 - 00000000bfe06000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe06000 - 00000000bfe12000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe12000 - 00000000bfe18000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfe18000 - 00000000bfe37000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe37000 - 00000000bff00000 (usable)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009d000 (usable)
[ 0.000000] modified: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfda5000 (usable)
[ 0.000000] modified: 00000000bfda5000 - 00000000bfdcc000 (ACPI NVS)
[ 0.000000] modified: 00000000bfdcc000 - 00000000bfddd000 (reserved)
[ 0.000000] modified: 00000000bfddd000 - 00000000bfdde000 (ACPI NVS)
[ 0.000000] modified: 00000000bfdde000 - 00000000bfe04000 (reserved)
[ 0.000000] modified: 00000000bfe04000 - 00000000bfe05000 (ACPI NVS)
[ 0.000000] modified: 00000000bfe05000 - 00000000bfe06000 (reserved)
[ 0.000000] modified: 00000000bfe06000 - 00000000bfe12000 (ACPI data)
[ 0.000000] modified: 00000000bfe12000 - 00000000bfe18000 (ACPI NVS)
[ 0.000000] modified: 00000000bfe18000 - 00000000bfe37000 (reserved)
[ 0.000000] modified: 00000000bfe37000 - 00000000bff00000 (usable)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff00000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff00000 page 4k
[ 0.000000] kernel direct mapping tables up to bff00000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000
[ 0.000000] RAMDISK: 37321000 - 37fefcea
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 Sony)
[ 0.000000] ACPI: XSDT 00000000bfe10f10 00054 (v01 Sony VAIO 20080605 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000bfe04a90 000F4 (v04 Sony VAIO 20080605 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - BFE17E40/00000000BFE17D40, using 32 (20090903/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000bfe06010 08016 (v01 Sony VAIO 20080605 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bfe17e40 00040
[ 0.000000] ACPI: APIC 00000000bfe0ff10 0006C (v02 Sony VAIO 20080605 MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000bfe16c90 0003C (v01 Sony VAIO 20080605 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bfe16c10 00038 (v01 Sony VAIO 20080605 MSFT 00010013)
[ 0.000000] ACPI: SLIC 00000000bfe12c10 00176 (v01 Sony VAIO 20080605 Sony 01000000)
[ 0.000000] ACPI: SSDT 00000000bfddd690 005F9 (v01 Sony VAIO 20080605 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff]
[ 0.000000] bootmap [0000000000019000 - 0000000000040fff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64]
[ 0.000000] #3 [0037321000 - 0037fefcea] RAMDISK ==> [0037321000 - 0037fefcea]
[ 0.000000] #4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
[ 0.000000] #5 [0001a2a000 - 0001a2a1fc] BRK ==> [0001a2a000 - 0001a2a1fc]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000fd170] fd170
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bfda5
[ 0.000000] 0: 0x000bfe37 -> 0x000bff00
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048059
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767654 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfda5000 - 00000000bfdcc000
[ 0.000000] PM: Registered nosave memory: 00000000bfdcc000 - 00000000bfddd000
[ 0.000000] PM: Registered nosave memory: 00000000bfddd000 - 00000000bfdde000
[ 0.000000] PM: Registered nosave memory: 00000000bfdde000 - 00000000bfe04000
[ 0.000000] PM: Registered nosave memory: 00000000bfe04000 - 00000000bfe05000
[ 0.000000] PM: Registered nosave memory: 00000000bfe05000 - 00000000bfe06000
[ 0.000000] PM: Registered nosave memory: 00000000bfe06000 - 00000000bfe12000
[ 0.000000] PM: Registered nosave memory: 00000000bfe12000 - 00000000bfe18000
[ 0.000000] PM: Registered nosave memory: 00000000bfe18000 - 00000000bfe37000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030033
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=535a2ba7-a06b-4913-b089-ff231026a62f ro vga=769 quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 4044696k/5242880k available (5409k kernel code, 1050644k absent, 147540k reserved, 2976k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2260.814 MHz processor.
[ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.62 BogoMIPS (lpj=22608140)
[ 0.010035] Security Framework initialized
[ 0.010055] AppArmor: AppArmor initialized
[ 0.010425] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012456] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013422] Mount-cache hash table entries: 256
[ 0.013574] Initializing cgroup subsys ns
[ 0.013579] Initializing cgroup subsys cpuacct
[ 0.013583] Initializing cgroup subsys memory
[ 0.013591] Initializing cgroup subsys devices
[ 0.013593] Initializing cgroup subsys freezer
[ 0.013595] Initializing cgroup subsys net_cls
[ 0.013616] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.013618] CPU: L2 cache: 3072K
[ 0.013622] CPU 0/0x0 -> Node 0
[ 0.013624] CPU: Physical Processor ID: 0
[ 0.013626] CPU: Processor Core ID: 0
[ 0.013629] mce: CPU supports 6 MCE banks
[ 0.013637] CPU0: Thermal monitoring enabled (TM2)
[ 0.013641] using mwait in idle threads.
[ 0.013643] Performance Events: Core2 events, Intel PMU driver.
[ 0.013649] ... version: 2
[ 0.013651] ... bit width: 40
[ 0.013652] ... generic registers: 2
[ 0.013654] ... value mask: 000000ffffffffff
[ 0.013656] ... max period: 000000007fffffff
[ 0.013657] ... fixed-purpose events: 3
[ 0.013659] ... event mask: 0000000700000003
[ 0.017093] ACPI: Core revision 20090903
[ 0.040018] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040024] ftrace: allocating 22518 entries in 89 pages
[ 0.050062] Setting APIC routing to flat
[ 0.050321] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.154184] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 3072K
[ 0.020000] CPU 1/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.020000] CPU1: Thermal monitoring enabled (TM2)
[ 0.310099] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 0.310106] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.320016] Brought up 2 CPUs
[ 0.320018] Total of 2 processors activated (9042.55 BogoMIPS).
[ 0.320618] CPU0 attaching sched-domain:
[ 0.320621] domain 0: span 0-1 level MC
[ 0.320623] groups: 0 1
[ 0.320629] CPU1 attaching sched-domain:
[ 0.320631] domain 0: span 0-1 level MC
[ 0.320633] groups: 1 0
[ 0.320723] devtmpfs: initialized
[ 0.320723] regulator: core version 0.5
[ 0.320723] Time: 10:01:35 Date: 05/03/10
[ 0.320723] NET: Registered protocol family 16
[ 0.320723] Trying to unpack rootfs image as initramfs...
[ 0.320723] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.320723] ACPI: bus type pci registered
[ 0.320723] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.320723] PCI: MCFG area at e0000000 reserved in E820
[ 0.332017] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.332020] PCI: Using configuration type 1 for base access
[ 0.340128] bio: create slab <bio-0> at 0
[ 0.341199] ACPI: EC: Look up EC in DSDT
[ 0.342282] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.344633] ACPI: BIOS _OSI(Linux) query ignored
[ 0.355289] ACPI: Interpreter enabled
[ 0.355289] ACPI: (supports S0 S3 S4 S5)
[ 0.355289] ACPI: Using IOAPIC for interrupt routing
[ 0.362520] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.380611] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.380763] ACPI: No dock devices found.
[ 0.381355] _OSC invalid UUID
[ 0.381358] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381468] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.381471] pci 0000:00:01.0: PME# disabled
[ 0.381561] pci 0000:00:1a.0: reg 20 io port: [0x70e0-0x70ff]
[ 0.381648] pci 0000:00:1a.1: reg 20 io port: [0x70c0-0x70df]
[ 0.381737] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd5204c00-0xd5204fff]
[ 0.381802] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.381807] pci 0000:00:1a.7: PME# disabled
[ 0.381857] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd5200000-0xd5203fff]
[ 0.381908] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.381913] pci 0000:00:1b.0: PME# disabled
[ 0.381989] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.381993] pci 0000:00:1c.0: PME# disabled
[ 0.382072] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.382077] pci 0000:00:1c.1: PME# disabled
[ 0.382161] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.382165] pci 0000:00:1c.3: PME# disabled
[ 0.382244] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.382248] pci 0000:00:1c.4: PME# disabled
[ 0.382315] pci 0000:00:1d.0: reg 20 io port: [0x70a0-0x70bf]
[ 0.382401] pci 0000:00:1d.1: reg 20 io port: [0x7080-0x709f]
[ 0.382485] pci 0000:00:1d.2: reg 20 io port: [0x7060-0x707f]
[ 0.382570] pci 0000:00:1d.3: reg 20 io port: [0x7040-0x705f]
[ 0.382656] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd5204800-0xd5204bff]
[ 0.382723] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.382727] pci 0000:00:1d.7: PME# disabled
[ 0.382948] pci 0000:00:1f.2: reg 10 io port: [0x7130-0x7137]
[ 0.382955] pci 0000:00:1f.2: reg 14 io port: [0x7120-0x7123]
[ 0.382962] pci 0000:00:1f.2: reg 18 io port: [0x7110-0x7117]
[ 0.382968] pci 0000:00:1f.2: reg 1c io port: [0x7100-0x7103]
[ 0.382975] pci 0000:00:1f.2: reg 20 io port: [0x7020-0x703f]
[ 0.382981] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd5204000-0xd52047ff]
[ 0.383020] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.383024] pci 0000:00:1f.2: PME# disabled
[ 0.383058] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd5205000-0xd52050ff]
[ 0.383075] pci 0000:00:1f.3: reg 20 io port: [0x7000-0x701f]
[ 0.383134] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.383142] pci 0000:01:00.0: reg 14 io port: [0x6000-0x60ff]
[ 0.383149] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0020000-0xd002ffff]
[ 0.383172] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xd0000000-0xd001ffff]
[ 0.383200] pci 0000:01:00.0: supports D1 D2
[ 0.383243] pci 0000:01:00.1: reg 10 32bit mmio: [0xd0030000-0xd0033fff]
[ 0.383302] pci 0000:01:00.1: supports D1 D2
[ 0.383364] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
[ 0.383367] pci 0000:00:01.0: bridge 32bit mmio: [0xc0000000-0xd00fffff]
[ 0.383419] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
[ 0.383423] pci 0000:00:1c.0: bridge 32bit mmio: [0xd3d00000-0xd50fffff]
[ 0.383479] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
[ 0.383483] pci 0000:00:1c.1: bridge 32bit mmio: [0xd2900000-0xd3cfffff]
[ 0.383602] pci 0000:06:00.0: reg 10 64bit mmio: [0xd1500000-0xd1501fff]
[ 0.383715] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.383726] pci 0000:06:00.0: PME# disabled
[ 0.383802] pci 0000:00:1c.3: bridge io port: [0x3000-0x3fff]
[ 0.383806] pci 0000:00:1c.3: bridge 32bit mmio: [0xd1500000-0xd28fffff]
[ 0.383891] pci 0000:08:00.0: reg 10 64bit mmio: [0xd0120000-0xd0123fff]
[ 0.383902] pci 0000:08:00.0: reg 18 io port: [0x2000-0x20ff]
[ 0.383938] pci 0000:08:00.0: reg 30 32bit mmio pref: [0xd0100000-0xd011ffff]
[ 0.383995] pci 0000:08:00.0: supports D1 D2
[ 0.383996] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384003] pci 0000:08:00.0: PME# disabled
[ 0.384060] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
[ 0.384064] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0100000-0xd14fffff]
[ 0.384113] pci 0000:0a:03.0: reg 10 32bit mmio: [0xd5100000-0xd51007ff]
[ 0.384169] pci 0000:0a:03.0: PME# supported from D0 D3hot D3cold
[ 0.384173] pci 0000:0a:03.0: PME# disabled
[ 0.384214] pci 0000:0a:03.1: reg 10 32bit mmio: [0xd5100900-0xd51009ff]
[ 0.384268] pci 0000:0a:03.1: supports D1 D2
[ 0.384270] pci 0000:0a:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384275] pci 0000:0a:03.1: PME# disabled
[ 0.384314] pci 0000:0a:03.2: reg 10 32bit mmio: [0xd5100800-0xd51008ff]
[ 0.384369] pci 0000:0a:03.2: supports D1 D2
[ 0.384371] pci 0000:0a:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384376] pci 0000:0a:03.2: PME# disabled
[ 0.384435] pci 0000:00:1e.0: transparent bridge
[ 0.384441] pci 0000:00:1e.0: bridge 32bit mmio: [0xd5100000-0xd51fffff]
[ 0.384478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.384612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.384746] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.384816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.384895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.384965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.385134] _OSC invalid UUID
[ 0.398686] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.398802] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.398914] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.399026] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.399136] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.399248] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.399359] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.399476] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.399608] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.399614] vgaarb: loaded
[ 0.399721] SCSI subsystem initialized
[ 0.399812] libata version 3.00 loaded.
[ 0.399879] usbcore: registered new interface driver usbfs
[ 0.399893] usbcore: registered new interface driver hub
[ 0.399919] usbcore: registered new device driver usb
[ 0.400080] ACPI: WMI: Mapper loaded
[ 0.400082] PCI: Using ACPI for IRQ routing
[ 0.400325] NetLabel: Initializing
[ 0.400327] NetLabel: domain hash size = 128
[ 0.400328] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.400341] NetLabel: unlabeled traffic allowed by default
[ 0.400375] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.400380] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.410187] Switching to clocksource tsc
[ 0.411769] AppArmor: AppArmor Filesystem Enabled
[ 0.411788] pnp: PnP ACPI init
[ 0.411810] ACPI: bus type pnp registered
[ 0.420499] pnp: PnP ACPI: found 10 devices
[ 0.420502] ACPI: ACPI bus type pnp unregistered
[ 0.420519] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.420527] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.420530] system 00:05: ioport range 0x1000-0x100f has been reserved
[ 0.420533] system 00:05: ioport range 0x800-0x803 has been reserved
[ 0.420535] system 00:05: ioport range 0x400-0x47f has been reserved
[ 0.420538] system 00:05: ioport range 0x500-0x53f has been reserved
[ 0.420543] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 0.420551] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.420554] system 00:09: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.420557] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.420560] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.420562] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.420565] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.420568] system 00:09: iomem range 0xfeb00000-0xfeb03fff has been reserved
[ 0.420571] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.425337] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.425340] pci 0000:00:01.0: IO window: 0x6000-0x6fff
[ 0.425344] pci 0000:00:01.0: MEM window: 0xc0000000-0xd00fffff
[ 0.425348] pci 0000:00:01.0: PREFETCH window: 0x000000d5300000-0x000000d54fffff
[ 0.425352] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.425355] pci 0000:00:1c.0: IO window: 0x5000-0x5fff
[ 0.425361] pci 0000:00:1c.0: MEM window: 0xd3d00000-0xd50fffff
[ 0.425365] pci 0000:00:1c.0: PREFETCH window: 0x000000d5500000-0x000000d56fffff
[ 0.425372] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.425375] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.425380] pci 0000:00:1c.1: MEM window: 0xd2900000-0xd3cfffff
[ 0.425384] pci 0000:00:1c.1: PREFETCH window: 0x000000d5700000-0x000000d58fffff
[ 0.425391] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 0.425395] pci 0000:00:1c.3: IO window: 0x3000-0x3fff
[ 0.425400] pci 0000:00:1c.3: MEM window: 0xd1500000-0xd28fffff
[ 0.425405] pci 0000:00:1c.3: PREFETCH window: 0x000000d5900000-0x000000d5afffff
[ 0.425411] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
[ 0.425414] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 0.425420] pci 0000:00:1c.4: MEM window: 0xd0100000-0xd14fffff
[ 0.425424] pci 0000:00:1c.4: PREFETCH window: 0x000000d5b00000-0x000000d5cfffff
[ 0.425432] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.425433] pci 0000:00:1e.0: IO window: disabled
[ 0.425438] pci 0000:00:1e.0: MEM window: 0xd5100000-0xd51fffff
[ 0.425442] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.425459] alloc irq_desc for 16 on node -1
[ 0.425461] alloc kstat_irqs on node -1
[ 0.425467] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.425471] pci 0000:00:01.0: setting latency timer to 64
[ 0.425479] alloc irq_desc for 17 on node -1
[ 0.425481] alloc kstat_irqs on node -1
[ 0.425484] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.425488] pci 0000:00:1c.0: setting latency timer to 64
[ 0.425497] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.425501] pci 0000:00:1c.1: setting latency timer to 64
[ 0.425510] alloc irq_desc for 19 on node -1
[ 0.425511] alloc kstat_irqs on node -1
[ 0.425514] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.425519] pci 0000:00:1c.3: setting latency timer to 64
[ 0.425528] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.425532] pci 0000:00:1c.4: setting latency timer to 64
[ 0.425539] pci 0000:00:1e.0: setting latency timer to 64
[ 0.425544] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.425546] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.425548] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
[ 0.425551] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xd00fffff]
[ 0.425553] pci_bus 0000:01: resource 2 pref mem [0xd5300000-0xd54fffff]
[ 0.425555] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff]
[ 0.425557] pci_bus 0000:02: resource 1 mem: [0xd3d00000-0xd50fffff]
[ 0.425560] pci_bus 0000:02: resource 2 pref mem [0xd5500000-0xd56fffff]
[ 0.425562] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 0.425564] pci_bus 0000:04: resource 1 mem: [0xd2900000-0xd3cfffff]
[ 0.425566] pci_bus 0000:04: resource 2 pref mem [0xd5700000-0xd58fffff]
[ 0.425569] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
[ 0.425571] pci_bus 0000:06: resource 1 mem: [0xd1500000-0xd28fffff]
[ 0.425573] pci_bus 0000:06: resource 2 pref mem [0xd5900000-0xd5afffff]
[ 0.425576] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff]
[ 0.425578] pci_bus 0000:08: resource 1 mem: [0xd0100000-0xd14fffff]
[ 0.425580] pci_bus 0000:08: resource 2 pref mem [0xd5b00000-0xd5cfffff]
[ 0.425582] pci_bus 0000:0a: resource 1 mem: [0xd5100000-0xd51fffff]
[ 0.425585] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.425587] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.425623] NET: Registered protocol family 2
[ 0.425790] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.426954] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.431143] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.431710] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.431713] TCP reno registered
[ 0.431833] NET: Registered protocol family 1
[ 0.432204] pci 0000:01:00.0: Boot video device
[ 0.432452] Scanning for low memory corruption every 60 seconds
[ 0.432582] audit: initializing netlink socket (disabled)
[ 0.432591] type=2000 audit(1272880895.429:1): initialized
[ 0.441853] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.443169] VFS: Disk quotas dquot_6.5.2
[ 0.443221] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.443797] fuse init (API version 7.13)
[ 0.443876] msgmni has been set to 7899
[ 0.444065] alg: No test for stdrng (krng)
[ 0.444121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.444124] io scheduler noop registered
[ 0.444126] io scheduler anticipatory registered
[ 0.444127] io scheduler deadline registered
[ 0.444159] io scheduler cfq registered (default)
[ 0.444302] alloc irq_desc for 24 on node -1
[ 0.444304] alloc kstat_irqs on node -1
[ 0.444312] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.444318] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.444432] alloc irq_desc for 25 on node -1
[ 0.444434] alloc kstat_irqs on node -1
[ 0.444442] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.444451] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.444580] alloc irq_desc for 26 on node -1
[ 0.444582] alloc kstat_irqs on node -1
[ 0.444589] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.444598] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.444732] alloc irq_desc for 27 on node -1
[ 0.444733] alloc kstat_irqs on node -1
[ 0.444740] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.444750] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.444876] alloc irq_desc for 28 on node -1
[ 0.444878] alloc kstat_irqs on node -1
[ 0.444885] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.444894] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.444986] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.445111] _OSC invalid UUID
[ 0.445205] _OSC invalid UUID
[ 0.445295] _OSC invalid UUID
[ 0.445385] _OSC invalid UUID
[ 0.445476] _OSC invalid UUID
[ 0.445581] _OSC invalid UUID
[ 0.445671] _OSC invalid UUID
[ 0.445761] _OSC invalid UUID
[ 0.445850] _OSC invalid UUID
[ 0.445939] _OSC invalid UUID
[ 0.445956] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.446748] ACPI: AC Adapter [ADP1] (on-line)
[ 0.446834] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.447754] ACPI: Lid Switch [LID0]
[ 0.447797] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.447803] ACPI: Power Button [PWRB]
[ 0.448669] ACPI: SSDT 00000000bfde0c10 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.449197] ACPI: SSDT 00000000bfdde710 00687 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.450668] Monitor-Mwait will be used to enter C-1 state
[ 0.450693] Monitor-Mwait will be used to enter C-2 state
[ 0.450718] Monitor-Mwait will be used to enter C-3 state
[ 0.450723] Marking TSC unstable due to TSC halts in idle
[ 0.450778] processor LNXCPU:00: registered as cooling_device0
[ 0.451226] ACPI: SSDT 00000000bfddfe10 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.451622] ACPI: SSDT 00000000bfde0f10 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.451955] Switching to clocksource hpet
[ 0.453439] processor LNXCPU:01: registered as cooling_device1
[ 0.463766] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.463774] ACPI: Thermal Zone [TZ00] (53 C)
[ 0.465279] ACPI: Invalid active0 threshold
[ 0.465941] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.465949] ACPI: Thermal Zone [TZ01] (53 C)
[ 0.467404] Linux agpgart interface v0.103
[ 0.467447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.468646] brd: module loaded
[ 0.469096] loop: module loaded
[ 0.469179] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.469563] Fixed MDIO Bus: probed
[ 0.469593] PPP generic driver version 2.4.2
[ 0.469623] tun: Universal TUN/TAP device driver, 1.6
[ 0.469625] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.469696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.469719] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.469737] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.469740] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.469772] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.469805] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.473707] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.473757] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd5204c00
[ 0.481931] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.491271] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.491388] usb usb1: configuration #1 chosen from 1 choice
[ 0.491417] hub 1-0:1.0: USB hub found
[ 0.491427] hub 1-0:1.0: 4 ports detected
[ 0.491494] alloc irq_desc for 23 on node -1
[ 0.491496] alloc kstat_irqs on node -1
[ 0.491503] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.491526] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.491529] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.491566] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.491594] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.495462] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.495479] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd5204800
[ 0.511269] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.511398] usb usb2: configuration #1 chosen from 1 choice
[ 0.511425] hub 2-0:1.0: USB hub found
[ 0.511434] hub 2-0:1.0: 8 ports detected
[ 0.511505] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.511527] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.511569] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.511578] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.511582] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.511621] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.511662] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070e0
[ 0.511744] usb usb3: configuration #1 chosen from 1 choice
[ 0.511767] hub 3-0:1.0: USB hub found
[ 0.511773] hub 3-0:1.0: 2 ports detected
[ 0.511819] alloc irq_desc for 21 on node -1
[ 0.511821] alloc kstat_irqs on node -1
[ 0.511826] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.511832] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.511835] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.511873] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.511904] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000070c0
[ 0.511986] usb usb4: configuration #1 chosen from 1 choice
[ 0.512009] hub 4-0:1.0: USB hub found
[ 0.512015] hub 4-0:1.0: 2 ports detected
[ 0.512061] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.512067] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.512070] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.512105] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.512130] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000070a0
[ 0.512208] usb usb5: configuration #1 chosen from 1 choice
[ 0.512238] hub 5-0:1.0: USB hub found
[ 0.512244] hub 5-0:1.0: 2 ports detected
[ 0.512285] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.512291] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.512294] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.512324] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.512349] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007080
[ 0.512423] usb usb6: configuration #1 chosen from 1 choice
[ 0.512449] hub 6-0:1.0: USB hub found
[ 0.512455] hub 6-0:1.0: 2 ports detected
[ 0.512495] alloc irq_desc for 18 on node -1
[ 0.512497] alloc kstat_irqs on node -1
[ 0.512501] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.512507] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.512510] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.512547] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.512578] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007060
[ 0.512657] usb usb7: configuration #1 chosen from 1 choice
[ 0.512680] hub 7-0:1.0: USB hub found
[ 0.512685] hub 7-0:1.0: 2 ports detected
[ 0.512731] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.512737] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.512740] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.512767] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.512791] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00007040
[ 0.512872] usb usb8: configuration #1 chosen from 1 choice
[ 0.512894] hub 8-0:1.0: USB hub found
[ 0.512902] hub 8-0:1.0: 2 ports detected
[ 0.512990] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.518544] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.522833] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.522848] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.522851] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.522854] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.522857] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.522958] mice: PS/2 mouse device common for all mice
[ 0.523061] rtc_cmos 00:06: RTC can wake from S4
[ 0.523099] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.523127] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.523257] device-mapper: uevent: version 1.0.3
[ 0.523374] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.523439] device-mapper: multipath: version 1.1.0 loaded
[ 0.523442] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.523633] cpuidle: using governor ladder
[ 0.523733] cpuidle: using governor menu
[ 0.524057] TCP cubic registered
[ 0.524174] NET: Registered protocol family 10
[ 0.524587] lo: Disabled Privacy Extensions
[ 0.524843] NET: Registered protocol family 17
[ 0.526433] PM: Resume from disk failed.
[ 0.526445] registered taskstats version 1
[ 0.527011] Magic number: 10:238:21
[ 0.527103] rtc_cmos 00:06: setting system clock to 2010-05-03 10:01:36 UTC (1272880896)
[ 0.527106] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.527108] EDD information not available.
[ 0.543847] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.599173] Freeing initrd memory: 13115k freed
[ 0.604128] Freeing unused kernel memory: 876k freed
[ 0.604470] Write protecting the kernel read-only data: 7680k
[ 0.619128] udev: starting version 151
[ 0.659606] sky2 driver version 1.25
[ 0.659649] sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.659662] sky2 0000:08:00.0: setting latency timer to 64
[ 0.659698] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
[ 0.693169] ahci 0000:00:1f.2: version 3.0
[ 0.693188] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.693239] alloc irq_desc for 29 on node -1
[ 0.693241] alloc kstat_irqs on node -1
[ 0.693250] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 0.693285] ahci: SSS flag set, parallel bus scan disabled
[ 0.693310] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.693313] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[ 0.693318] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.694163] alloc irq_desc for 30 on node -1
[ 0.694166] alloc kstat_irqs on node -1
[ 0.694242] sky2 0000:08:00.0: irq 30 for MSI/MSI-X
[ 0.695055] sky2 eth0: addr 00:1d:ba:19:b9:18
[ 0.712121] scsi0 : ahci
[ 0.716903] scsi1 : ahci
[ 0.717165] scsi2 : ahci
[ 0.717223] scsi3 : ahci
[ 0.717313] ata1: SATA max UDMA/133 abar m2048@0xd5204000 port 0xd5204100 irq 29
[ 0.717317] ata2: SATA max UDMA/133 abar m2048@0xd5204000 port 0xd5204180 irq 29
[ 0.717319] ata3: DUMMY
[ 0.717320] ata4: DUMMY
[ 0.718761] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 0.724059] acpi device:2a: registered as cooling_device2
[ 0.724154] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/LNXVIDEO:01/input/input4
[ 0.724201] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.860080] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.013536] usb 1-2: configuration #1 chosen from 1 choice
[ 1.060063] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.061030] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.061406] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC3BP, max UDMA/133
[ 1.061408] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.062529] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.062929] ata1.00: configured for UDMA/133
[ 1.080125] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 1.080275] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.080290] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.080344] sd 0:0:0:0: [sda] Write Protect is off
[ 1.080347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.080368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.080487] sda: sda1 sda2 sda3 < sda5
[ 1.130059] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 1.156036] sda6 >
[ 1.156342] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.281625] usb 2-2: configuration #1 chosen from 1 choice
[ 1.287084] Initializing USB Mass Storage driver...
[ 1.287244] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.287328] usbcore: registered new interface driver usb-storage
[ 1.287331] USB Mass Storage support registered.
[ 1.287335] usb-storage: device found at 2
[ 1.287336] usb-storage: waiting for device to settle before scanning
[ 1.430071] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.452632] ohci1394 0000:0a:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.460053] usb 2-6: new high speed USB device using ehci_hcd and address 4
[ 1.513313] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d5100000-d51007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1.612656] usb 2-6: configuration #1 chosen from 1 choice
[ 1.613041] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.613206] usb-storage: device found at 4
[ 1.613208] usb-storage: waiting for device to settle before scanning
[ 1.890043] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 1.952270] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011100000, using 320k, total 320k
[ 1.952274] vesafb: mode is 640x480x8, linelength=640, pages=0
[ 1.952275] vesafb: scrolling: redraw
[ 1.952279] vesafb: Pseudocolor: size=0:8:8:8, shift=0:0:0:0
[ 1.952426] fb0: VESA VGA frame buffer device
[ 1.956778] Console: switching to colour frame buffer device 80x30
[ 2.071470] usb 6-1: configuration #1 chosen from 1 choice
[ 2.091582] usbcore: registered new interface driver hiddev
[ 2.106631] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input5
[ 2.106897] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[ 2.120524] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[ 2.120552] usbcore: registered new interface driver usbhid
[ 2.120554] usbhid: v2.6:USB HID core driver
[ 2.332852] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.830139] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302bf73dc]
[ 4.241171] Adding 3108536k swap on /dev/sda6. Priority:-1 extents:1 across:3108536k
[ 5.828194] udev: starting version 151
[ 6.281494] usb-storage: device scan complete
[ 6.282453] scsi 4:0:0:0: Direct-Access WD My Passport 070A 1028 PQ: 0 ANSI: 4
[ 6.283185] scsi 4:0:0:1: CD-ROM WD Virtual CD 070A 1028 PQ: 0 ANSI: 4
[ 6.283948] scsi 4:0:0:2: Enclosure WD SES Device 1028 PQ: 0 ANSI: 4
[ 6.284674] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.286081] sd 4:0:0:0: [sdb] 623769600 512-byte logical blocks: (319 GB/297 GiB)
[ 6.287558] sr0: scsi3-mmc drive: 51x/51x caddy
[ 6.287561] Uniform CD-ROM driver Revision: 3.20
[ 6.287813] sr 4:0:0:1: Attached scsi CD-ROM sr0
[ 6.288021] sr 4:0:0:1: Attached scsi generic sg2 type 5
[ 6.288331] scsi 4:0:0:2: Attached scsi generic sg3 type 13
[ 6.289307] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.289311] sd 4:0:0:0: [sdb] Mode Sense: 23 00 10 00
[ 6.289314] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.292703] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.292832] sdb: sdb1
[ 6.575202] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.575313] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 6.610240] usb-storage: device scan complete
[ 6.611327] scsi 5:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.79 PQ: 0 ANSI: 0
[ 6.616576] sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.617009] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 6.617834] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 7.093815] type=1505 audit(1272873703.062:2): operation="profile_load" pid=582 name="/sbin/dhclient3"
[ 7.094378] type=1505 audit(1272873703.062:3): operation="profile_load" pid=582 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 7.094676] type=1505 audit(1272873703.062:4): operation="profile_load" pid=582 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.159913] lp: driver loaded but no devices found
[ 8.470136] vga16fb: initializing
[ 8.470140] vga16fb: mapped to 0xffff8800000a0000
[ 8.470143] vga16fb: not registering due to another framebuffer present
[ 9.294439] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 9.294444] Disabling lock debugging due to kernel taint
[ 9.346505] [fglrx] Maximum main memory to use for locked dma buffers: 3801 MBytes.
[ 9.346778] [fglrx] vendor: 1002 device: 95c4 count: 1
[ 9.355924] [fglrx] ioport: bar 1, base 0x6000, size: 0x100
[ 9.355944] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.355950] pci 0000:01:00.0: setting latency timer to 64
[ 9.356121] [fglrx] Kernel PAT support is enabled
[ 9.356145] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors
[ 9.356969] cfg80211: Calling CRDA to update world regulatory domain
[ 9.359097] sony-laptop: Sony Notebook Control Driver v0.6.
[ 9.380246] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/SNY5001:00/input/input6
[ 9.380331] input: Sony Vaio Jogdial as /devices/virtual/input/input7
[ 9.380386] sony-laptop: brightness ignored, must be controlled by ACPI video driver
[ 9.655844] ses 4:0:0:2: Attached Enclosure device
[ 9.900545] sdhci: Secure Digital Host Controller Interface driver
[ 9.900548] sdhci: Copyright(c) Pierre Ossman
[ 9.909117] Linux video capture interface: v2.00
[ 9.964389] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183d)
[ 9.965869] input: UVC Camera (05ca:183d) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
[ 9.965959] usbcore: registered new interface driver uvcvideo
[ 9.965987] USB Video Class driver (v0.1.0)
[ 10.032697] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input9
[ 10.051964] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input10
[ 10.054469] sdhci-pci 0000:0a:03.1: SDHCI controller found [1180:0822] (rev 22)
[ 10.054487] sdhci-pci 0000:0a:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.054572] Registered led device: mmc0::
[ 10.054610] mmc0: SDHCI controller on PCI [0000:0a:03.1] using PIO
[ 10.106594] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 10.106594] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 10.106688] iwlagn 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 10.106717] iwlagn 0000:06:00.0: setting latency timer to 64
[ 10.106775] iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 10.140917] iwlagn 0000:06:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 10.140972] alloc irq_desc for 31 on node -1
[ 10.140974] alloc kstat_irqs on node -1
[ 10.140990] iwlagn 0000:06:00.0: irq 31 for MSI/MSI-X
[ 11.048264] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.604019] cfg80211: World regulatory domain updated:
[ 11.604021] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.604024] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.604026] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.604028] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.604030] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.604032] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.318983] alloc irq_desc for 22 on node -1
[ 12.318986] alloc kstat_irqs on node -1
[ 12.318992] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.319045] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.719492] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 12.727916] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.727984] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 13.190746] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.689905] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 13.690546] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 13.690548] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 13.690550] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 13.997255] sky2 eth0: enabling interface
[ 13.997741] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.905437] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 15.905870] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.200477] type=1505 audit(1272873712.173:5): operation="profile_load" pid=1078 name="/usr/share/gdm/guest-session/Xsession"
[ 16.201902] type=1505 audit(1272873712.173:6): operation="profile_replace" pid=1079 name="/sbin/dhclient3"
[ 16.202456] type=1505 audit(1272873712.173:7): operation="profile_replace" pid=1079 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.202761] type=1505 audit(1272873712.173:8): operation="profile_replace" pid=1079 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.250608] type=1505 audit(1272873712.214:9): operation="profile_load" pid=1080 name="/usr/bin/evince"
[ 16.257613] type=1505 audit(1272873712.224:10): operation="profile_load" pid=1080 name="/usr/bin/evince-previewer"
[ 16.262630] type=1505 audit(1272873712.234:11): operation="profile_load" pid=1080 name="/usr/bin/evince-thumbnailer"
[ 16.464775] type=1505 audit(1272873712.432:12): operation="profile_load" pid=1083 name="/usr/lib/cups/backend/cups-pdf"
[ 16.465452] type=1505 audit(1272873712.432:13): operation="profile_load" pid=1083 name="/usr/sbin/cupsd"
[ 16.483118] type=1505 audit(1272873712.452:14): operation="profile_load" pid=1084 name="/usr/sbin/tcpdump"
[ 17.655745] alloc irq_desc for 32 on node -1
[ 17.655748] alloc kstat_irqs on node -1
[ 17.655760] fglrx_pci 0000:01:00.0: irq 32 for MSI/MSI-X
[ 17.656301] [fglrx] Firegl kernel thread PID: 1150
[ 17.656539] [fglrx] IRQ 32 Enabled
[ 18.583635] ppdev: user-space parallel port driverDernière modification par Emetryon (Le 03/05/2010, à 09:07)
Hors ligne
#32 Le 03/05/2010, à 09:39
- JB-home
Re : Lucid : Démarrage encore plus lent qu'avant ?
merci grandtoubab pour l'astuce, j'ai gagné encore plus, c'est quasi instantané, j'en ai profité aussi pour corriger l'erreur :
xc2028 0-0061: Error: firmware xc3028-v27.fw not found.avec ce tuto : http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware
# In order to use, you need to:
# 1) Download the windows driver with something like:
# wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
# ( find here: http://cdn.pinnaclesys.com/SupportFiles/PCTV%20Drivers/ReadmePCTV.htm )
# 2) Extract the file hcw85bda.sys from the zip into the current dir:
# unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
# 3) Download the extract script
# wget http://linuxtv.org/hg/v4l-dvb/raw-file/3919b17dc88e/linux/Documentation/video4linux/extract_xc3028.pl
# 3) run the script:
# perl extract_xc3028.pl
# 4) copy the generated file:
# sudo cp xc3028-v27.fw /lib/firmwareHors ligne
#33 Le 03/05/2010, à 10:40
- waliby42
Re : Lucid : Démarrage encore plus lent qu'avant ?
bonjour,
moi aussi depuis le passage a Lucid j'ai un démarrage extrêmement lent 58.81 d'après boot char j'ai essayer toute les manips trouvé rien a faire.
le logo de notre merveilleuse distrib 
arrive très rapidement après Grub (Grub que j'ai mis a jour) ,grâce a la manip de Emetryon avec Plymouth.
mais les petit point défile très longtemps ensuite j ai un écran noir qui dure une vingtaine de secondes ensuite mon fond d'écran apparait et encore bien 5 à 10 secondes avant que les icône et le tableau de bort s affiche .
Donc je vais suivre ce sujet avec attention car presque 1 minute cela fait quand même un peu long pour démarrer.:(
cdl.
Hors ligne
#34 Le 03/05/2010, à 16:43
- grandtoubab
Re : Lucid : Démarrage encore plus lent qu'avant ?
bonjour,
Si tout comme moi vous avez eu ce message
Les paquets suivants seront ENLEVÉS :
ubuntu-minimal* ureadahead*Il vaut mieux reinstaller ubuntu-minimal en utilisant Synaptic.
Pour rester cohérent avec la distribution 
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#35 Le 03/05/2010, à 17:34
- Tripack
Re : Lucid : Démarrage encore plus lent qu'avant ?
Voilà comme cela démarre chez moi...Après initialisation du disque dur et bios nvdia ect...
l'écran est noir et un tiret clignote en haut à gauche...pendant une douzaine de secondes...puis un écran vert d'une seconde maxi...2 ou 3 secondes d'écran noir , puis le logo violet avec les tirets 1 ou 2 secondes..puis le fond d'écran violet...mon dock apparait puis ensuite mon fond d'écran perso....et quelques secondes d'attente avant de voir mon systray et mes icônes..
Au moment ou j'appuie sur le bouton power et mon bureau totalement opérationnel ...Il s'est passé là 1 mn 15 s
Ubuntu 12.04 LTS Linux mint Kathia
Groove Salad: a nicely chilled plate of ambient
Hors ligne
#36 Le 03/05/2010, à 18:02
- levieucep
Re : Lucid : Démarrage encore plus lent qu'avant ?
Salut,
j'ai suivi le conseil de grandtoubab et aussi celui de tripack
ça n'a rien changé pour moi .....
d'autres idées ???
Merci d'avance
Ubuntu 9.10
ACER ASPIRE 5315
Quand le dernier arbre sera abbatu, la dernière riviére empoisonnée, le dernier poisson péché, alors vous comprendrez que l'argent ne se mange pas (Indiens CRI du Canada)
Hors ligne
#37 Le 03/05/2010, à 20:15
- waliby42
Re : Lucid : Démarrage encore plus lent qu'avant ?
re
merci grandtoubab c est remis.:D
mais rien n'à changé pour la vitesse de démarrage.:(
Dernière modification par waliby42 (Le 03/05/2010, à 20:19)
Hors ligne
#38 Le 03/05/2010, à 20:22
- Compte anonymisé
Re : Lucid : Démarrage encore plus lent qu'avant ?
45 secondes environ pour moi, soit une dizaine de secondes de moins que pour Karmic.
Mais le boot est super moche ( une succession hétéroclite de tirets clignotants et d'écrans noir/rose, ça fait vraiment pas propre )
#39 Le 04/05/2010, à 07:25
- grandtoubab
Re : Lucid : Démarrage encore plus lent qu'avant ?
pour changer le theme utilisé lors du boot
http://forum.ubuntu-fr.org/viewtopic.php?id=387155
http://forum.ubuntu-fr.org/viewtopic.php?id=391343
Dernière modification par grandtoubab (Le 04/05/2010, à 07:26)
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#40 Le 04/05/2010, à 14:04
- waliby42
Re : Lucid : Démarrage encore plus lent qu'avant ?
bonjour
ici il parle d'un problème similaire
http://forum.ubuntu-fr.org/viewtopic.php?id=229055
ca serais lié a la carte mère mais malheureusement j'ai pas trouvé le fameux jmicron dont il parle dans mon BIOS pourtant dans mon cas cela concorderais j'ai un carte mère asus.
si quelqu'un a une idée de ce coté .
cdl
Hors ligne
#41 Le 04/05/2010, à 16:09
- Emetryon
Re : Lucid : Démarrage encore plus lent qu'avant ?
Pour mon temps de connexion ça reste inchangé, mais en tripatouillant les thèmes, non seulement c'est de plus en plus moche mais aussi de plus en plus lent!
Alors pour l'instant je vais attendre d'autres soluces.
Hors ligne
#42 Le 04/05/2010, à 23:35
- Emetryon
Re : Lucid : Démarrage encore plus lent qu'avant ?
Problème solutionné ! http://forum.ubuntu-fr.org/viewtopic.php?id=387155
Hors ligne
#43 Le 05/05/2010, à 09:55
- waliby42
Re : Lucid : Démarrage encore plus lent qu'avant ?
re
Moi le theme ca va c est le temps de démarrage qui a rien changé
ce que je comprend pas (j'y connais rien au dmesg) mais apparemment je passe de 7 a 24 secondes entre 2 et c est la que je perd le plus de temps il me semble je met le bout de log qui m'interpelle si quelqu'un vois quelque chose de louche.
[ 7.593226] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 7.598227] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[ 7.608220] sd 8:0:0:2: [sde] Attached SCSI removable disk
[ 7.613220] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[ 24.408457] udev: starting version 151
[ 24.480679] Adding 1494004k swap on /dev/sda8. Priority:-1 extents:1 across:1494004kmerci
cdl
Hors ligne
#44 Le 05/05/2010, à 12:06
- pymingue
Re : Lucid : Démarrage encore plus lent qu'avant ?
Bonjour! De l'appui sur bouton de démarrage, à l'apparition du bureau, je suis passé de 75' à 35'en décochant mon lecteur de disquettes dans le bios!
si celà peut aider!
PC de bureau: ubuntu 10.04 32 bits: CM gigabyte p55m ud2: intel core i5 750: 4 GB ddr3: ati radéon HD 4650 1024 Mo
Netbook samsung N150: Dual boot W7starter/ ubuntu 10.04
Hors ligne
#45 Le 05/05/2010, à 17:27
- luke42410
Re : Lucid : Démarrage encore plus lent qu'avant ?
Bonjour
Afficher Plymouth beaucoup plus tôt
Plymouth s'affiche tard par défaut, et est précédé d'un tiret noir clignotant qui n'est pas particulièrement esthétique. Ceci est connu dans Launchpad où les raisons de compatibilités matérielles sont expliquées.
Pour améliorer ceci en attendant une mise-à-jour corrective, il faut réaliser ces opérations dans un terminal :
echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
sudo update-initramfs -u
L'affichage de plymouth apparaitra beaucoup plus tôt au démarrage suivant.Linux est à l'informatique ce que les épinards sont à la nourriture : un truc dont tout le monde connait les bienfaits mais personne n'en veut et on préférera toujours manger pizza et bière
Site Web entièrement réalisé avec des logiciels libres, ( sous Gedit ) : http://jaimedesphrases.free.fr
Hors ligne
#46 Le 05/05/2010, à 20:22
- waliby42
Re : Lucid : Démarrage encore plus lent qu'avant ?
merci luke42410
Je l'ai déjà fait c'est vrais que c 'est plus jolie qu'un tiret noir mais le démarrage et toujours aussi lent 
.
Ce qui m'embête un peu c'est que d'après tous ce que j'ai pu lire avant la sortie de Lucid et même après ce schématise à :
Ubuntu 10.04 = démarrage en 10 secondes.
moi c'est plus 1 minute et 10 secondes 
alors que sur la 9.10 c'était pas le cas.
Et comme toi mon Dmesg reste bloqué sur le lecteur de carte comme tu la peu être vu sur mon rapport plus haut.
Mais je désespère pas et continue a chercher .:D
merci pymingue
j'ai essayer après avoir lu le message aucun changement pour le moment.
merci pour votre aide.
Dernière modification par waliby42 (Le 05/05/2010, à 20:30)
Hors ligne
#47 Le 05/05/2010, à 20:27
- grandtoubab
Re : Lucid : Démarrage encore plus lent qu'avant ?
les options à utiliser selon le type de matériel
https://wiki.ubuntu.com/X/KernelModeSetting
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne
#48 Le 05/05/2010, à 20:37
- luke42410
Re : Lucid : Démarrage encore plus lent qu'avant ?
Waliby42 -->
J'ai désactiver l'USB dans le BIOS, La Ligne qui bloque 20 secondes c'est maintenant :
[ 1.326656] EXT3-fs: mounted filesystem with ordered data mode.[ 21.797427] udev: starting version 151Linux est à l'informatique ce que les épinards sont à la nourriture : un truc dont tout le monde connait les bienfaits mais personne n'en veut et on préférera toujours manger pizza et bière
Site Web entièrement réalisé avec des logiciels libres, ( sous Gedit ) : http://jaimedesphrases.free.fr
Hors ligne
#49 Le 05/05/2010, à 21:06
- roger3000
Re : Lucid : Démarrage encore plus lent qu'avant ?
Salut!
je suis le sujet pour le meme probleme...
rien entre la seconde 1 et la 46 dans mon dmesg???
mais que fait donc mon ordi pendant ce temps la?... il cherche la swap?
pas que je sois tout le temps super pressé mais bon...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffa8000 (usable)
[ 0.000000] BIOS-e820: 000000006ffa8000 - 000000006ffb0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006ffb0000 - 000000006ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006ffbe000 - 000000006fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x6ffa8 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 070000000 mask FF0000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000006ffa8000 (usable)
[ 0.000000] modified: 000000006ffa8000 - 000000006ffb0000 (ACPI NVS)
[ 0.000000] modified: 000000006ffb0000 - 000000006ffbe000 (ACPI data)
[ 0.000000] modified: 000000006ffbe000 - 000000006fff0000 (ACPI NVS)
[ 0.000000] modified: 000000006fff0000 - 0000000070000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37854000 - 37fef3a7
[ 0.000000] Allocated new RAMDISK: 008de000 - 010793a7
[ 0.000000] Move RAMDISK from 0000000037854000 - 0000000037fef3a6 to 008de000 - 010793a6
[ 0.000000] ACPI: RSDP 000f7f50 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 6ffb0100 00054 (v01 _ASUS_ Notebook 05000730 MSFT 00000097)
[ 0.000000] ACPI: FACP 6ffb0290 000F4 (v03 A.M.I OEMFACP 05000730 MSFT 00000097)
[ 0.000000] ACPI: DSDT 6ffb0630 0779E (v01 T12R0 T12R0000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 6ffbe000 00040
[ 0.000000] ACPI: APIC 6ffb0390 0005C (v01 A.M.I OEMAPIC 05000730 MSFT 00000097)
[ 0.000000] ACPI: MCFG 6ffb03f0 0003C (v01 A.M.I OEMMCFG 05000730 MSFT 00000097)
[ 0.000000] ACPI: SLIC 6ffb0430 00176 (v01 _ASUS_ Notebook 05000730 MSFT 00000097)
[ 0.000000] ACPI: BOOT 6ffb0600 00028 (v01 A.M.I OEMBOOT 05000730 MSFT 00000097)
[ 0.000000] ACPI: OEMB 6ffbe040 0005B (v01 A.M.I AMI_OEM 05000730 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 903MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd1f6] BRK ==> [00008da000 - 00008dd1f6]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008de000 - 00010793a7] NEW RAMDISK ==> [00008de000 - 00010793a7]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0006ffa8
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0006ffa8
[ 0.000000] On node 0 totalpages: 458551
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c107b200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1808 pages used for memmap
[ 0.000000] HighMem zone: 229530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=019b275b-4861-47ce-8f12-95e4f1fec6cb ro quiet nosplash i8042.reset i8042.nomux=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 9172960 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0006ffa8)
[ 0.000000] Memory: 1793060k/1834656k available (4673k kernel code, 40104k reserved, 2121k data, 656k init, 925352k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1862.245 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.49 BogoMIPS (lpj=7448980)
[ 0.004037] Security Framework initialized
[ 0.004078] AppArmor: AppArmor initialized
[ 0.004088] Mount-cache hash table entries: 512
[ 0.004295] Initializing cgroup subsys ns
[ 0.004302] Initializing cgroup subsys cpuacct
[ 0.004307] Initializing cgroup subsys memory
[ 0.004317] Initializing cgroup subsys devices
[ 0.004321] Initializing cgroup subsys freezer
[ 0.004324] Initializing cgroup subsys net_cls
[ 0.004354] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004358] CPU: L2 cache: 1024K
[ 0.004362] CPU: Physical Processor ID: 0
[ 0.004364] CPU: Processor Core ID: 0
[ 0.004369] mce: CPU supports 6 MCE banks
[ 0.004381] CPU0: Thermal monitoring handled by SMI
[ 0.004388] using mwait in idle threads.
[ 0.004402] Performance Events: no PMU driver, software events only.
[ 0.004410] Checking 'hlt' instruction... OK.
[ 0.023643] ACPI: Core revision 20090903
[ 0.040016] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040026] ftrace: allocating 21771 entries in 43 pages
[ 0.044097] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044449] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086045] CPU0: Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.172047] CPU1: Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
[ 0.172065] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176027] Brought up 2 CPUs
[ 0.176031] Total of 2 processors activated (7449.07 BogoMIPS).
[ 0.176481] CPU0 attaching sched-domain:
[ 0.176486] domain 0: span 0-1 level MC
[ 0.176489] groups: 0 1
[ 0.176497] CPU1 attaching sched-domain:
[ 0.176500] domain 0: span 0-1 level MC
[ 0.176502] groups: 1 0
[ 0.176645] devtmpfs: initialized
[ 0.176645] regulator: core version 0.5
[ 0.176645] Time: 20:00:13 Date: 05/05/10
[ 0.176645] NET: Registered protocol family 16
[ 0.176645] Trying to unpack rootfs image as initramfs...
[ 0.176645] EISA bus registered
[ 0.176645] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.176645] ACPI: bus type pci registered
[ 0.176645] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.176645] PCI: Not using MMCONFIG.
[ 0.176645] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
[ 0.176645] PCI: Using configuration type 1 for base access
[ 0.180175] bio: create slab <bio-0> at 0
[ 0.181587] ACPI: EC: Look up EC in DSDT
[ 0.183446] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.226297] ACPI: Interpreter enabled
[ 0.226316] ACPI: (supports S0 S3 S4 S5)
[ 0.226352] ACPI: Using IOAPIC for interrupt routing
[ 0.226466] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.228698] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.228703] PCI: Using MMCONFIG for extended config space
[ 0.238394] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.238761] ACPI: No dock devices found.
[ 0.238951] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.239144] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.239149] pci 0000:00:04.0: PME# disabled
[ 0.239233] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.239238] pci 0000:00:05.0: PME# disabled
[ 0.239302] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.239307] pci 0000:00:06.0: PME# disabled
[ 0.239372] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.239376] pci 0000:00:07.0: PME# disabled
[ 0.239452] pci 0000:00:12.0: reg 10 io port: [0xe800-0xe807]
[ 0.239463] pci 0000:00:12.0: reg 14 io port: [0xe400-0xe403]
[ 0.239473] pci 0000:00:12.0: reg 18 io port: [0xe000-0xe007]
[ 0.239483] pci 0000:00:12.0: reg 1c io port: [0xdc00-0xdc03]
[ 0.239493] pci 0000:00:12.0: reg 20 io port: [0xd800-0xd80f]
[ 0.239504] pci 0000:00:12.0: reg 24 32bit mmio: [0xfebffc00-0xfebfffff]
[ 0.239531] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.239609] pci 0000:00:13.0: reg 10 32bit mmio: [0xfebfe000-0xfebfefff]
[ 0.239693] pci 0000:00:13.1: reg 10 32bit mmio: [0xfebfd000-0xfebfdfff]
[ 0.239777] pci 0000:00:13.2: reg 10 32bit mmio: [0xfebfc000-0xfebfcfff]
[ 0.239862] pci 0000:00:13.3: reg 10 32bit mmio: [0xfebfb000-0xfebfbfff]
[ 0.239946] pci 0000:00:13.4: reg 10 32bit mmio: [0xfebfa000-0xfebfafff]
[ 0.240110] pci 0000:00:13.5: reg 10 32bit mmio: [0xfebff800-0xfebff8ff]
[ 0.240191] pci 0000:00:13.5: supports D1 D2
[ 0.240194] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.240200] pci 0000:00:13.5: PME# disabled
[ 0.240253] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[ 0.240337] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.240347] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.240357] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.240367] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.240377] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.240457] pci 0000:00:14.2: reg 10 64bit mmio: [0xfebf4000-0xfebf7fff]
[ 0.240524] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.240531] pci 0000:00:14.2: PME# disabled
[ 0.240742] pci 0000:01:05.0: reg 10 32bit mmio pref: [0x90000000-0x9fffffff]
[ 0.240749] pci 0000:01:05.0: reg 14 io port: [0x7800-0x78ff]
[ 0.240756] pci 0000:01:05.0: reg 18 32bit mmio: [0xf88f0000-0xf88fffff]
[ 0.240772] pci 0000:01:05.0: reg 30 32bit mmio pref: [0xf88c0000-0xf88dffff]
[ 0.240790] pci 0000:01:05.0: supports D1 D2
[ 0.240822] pci 0000:00:01.0: bridge io port: [0x7000-0x7fff]
[ 0.240827] pci 0000:00:01.0: bridge 32bit mmio: [0xf8800000-0xf88fffff]
[ 0.240832] pci 0000:00:01.0: bridge 32bit mmio pref: [0x8ff00000-0xafefffff]
[ 0.240897] pci 0000:02:00.0: reg 10 64bit mmio: [0xf89f0000-0xf89fffff]
[ 0.241075] pci 0000:00:04.0: bridge 32bit mmio: [0xf8900000-0xf89fffff]
[ 0.241150] pci 0000:00:05.0: bridge io port: [0x8000-0x9fff]
[ 0.241154] pci 0000:00:05.0: bridge 32bit mmio: [0xf8a00000-0xfc9fffff]
[ 0.241161] pci 0000:00:05.0: bridge 64bit mmio pref: [0xaff00000-0xcfefffff]
[ 0.241371] pci 0000:08:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.241409] pci 0000:08:01.0: supports D1 D2
[ 0.241412] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.241419] pci 0000:08:01.0: PME# disabled
[ 0.241482] pci 0000:08:01.1: reg 10 32bit mmio: [0xfeaffc00-0xfeaffcff]
[ 0.241567] pci 0000:08:01.1: supports D1 D2
[ 0.241570] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.241577] pci 0000:08:01.1: PME# disabled
[ 0.241638] pci 0000:08:01.2: reg 10 32bit mmio: [0xfeaff800-0xfeaff8ff]
[ 0.241723] pci 0000:08:01.2: supports D1 D2
[ 0.241726] pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.241733] pci 0000:08:01.2: PME# disabled
[ 0.241823] pci 0000:08:07.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.241836] pci 0000:08:07.0: reg 14 32bit mmio: [0xfeaff400-0xfeaff4ff]
[ 0.241915] pci 0000:08:07.0: supports D1 D2
[ 0.241918] pci 0000:08:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.241925] pci 0000:08:07.0: PME# disabled
[ 0.241990] pci 0000:00:14.4: transparent bridge
[ 0.241997] pci 0000:00:14.4: bridge io port: [0xa000-0xbfff]
[ 0.242003] pci 0000:00:14.4: bridge 32bit mmio: [0xfca00000-0xfeafffff]
[ 0.242010] pci 0000:00:14.4: bridge 32bit mmio pref: [0xcff00000-0xdfefffff]
[ 0.242065] pci_bus 0000:00: on NUMA node 0
[ 0.242079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.242241] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.242403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.242497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.242580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.242693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.242869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.251294] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *11 12)
[ 0.251471] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 12)
[ 0.251618] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 12)
[ 0.251764] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 12) *10
[ 0.251917] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 12)
[ 0.252089] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 12)
[ 0.252253] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 12)
[ 0.252399] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 12)
[ 0.252572] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.252579] vgaarb: loaded
[ 0.252755] SCSI subsystem initialized
[ 0.252912] libata version 3.00 loaded.
[ 0.253011] usbcore: registered new interface driver usbfs
[ 0.253029] usbcore: registered new interface driver hub
[ 0.253074] usbcore: registered new device driver usb
[ 0.253267] ACPI: WMI: Mapper loaded
[ 0.253270] PCI: Using ACPI for IRQ routing
[ 0.253602] NetLabel: Initializing
[ 0.253604] NetLabel: domain hash size = 128
[ 0.253606] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253624] NetLabel: unlabeled traffic allowed by default
[ 0.253673] Switching to clocksource tsc
[ 0.254736] AppArmor: AppArmor Filesystem Enabled
[ 0.254770] pnp: PnP ACPI init
[ 0.254800] ACPI: bus type pnp registered
[ 0.257668] pnp: PnP ACPI: found 12 devices
[ 0.257673] ACPI: ACPI bus type pnp unregistered
[ 0.257679] PnPBIOS: Disabled by ACPI PNP
[ 0.257706] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.257710] system 00:05: ioport range 0x40b-0x40b has been reserved
[ 0.257713] system 00:05: ioport range 0x4d6-0x4d6 has been reserved
[ 0.257717] system 00:05: ioport range 0xc00-0xc01 has been reserved
[ 0.257720] system 00:05: ioport range 0xc14-0xc14 has been reserved
[ 0.257724] system 00:05: ioport range 0xc50-0xc51 has been reserved
[ 0.257727] system 00:05: ioport range 0xc52-0xc52 has been reserved
[ 0.257731] system 00:05: ioport range 0xc6c-0xc6c has been reserved
[ 0.257734] system 00:05: ioport range 0xc6f-0xc6f has been reserved
[ 0.257744] system 00:05: ioport range 0xcd0-0xcd1 has been reserved
[ 0.257748] system 00:05: ioport range 0xcd2-0xcd3 has been reserved
[ 0.257751] system 00:05: ioport range 0xcd4-0xcd5 has been reserved
[ 0.257755] system 00:05: ioport range 0xcd6-0xcd7 has been reserved
[ 0.257758] system 00:05: ioport range 0xcd8-0xcdf has been reserved
[ 0.257762] system 00:05: ioport range 0x800-0x89f has been reserved
[ 0.257765] system 00:05: ioport range 0xb00-0xb1f could not be reserved
[ 0.257769] system 00:05: ioport range 0x900-0x90f has been reserved
[ 0.257772] system 00:05: ioport range 0x910-0x91f has been reserved
[ 0.257776] system 00:05: ioport range 0xfe00-0xfefe has been reserved
[ 0.257780] system 00:05: ioport range 0x4000-0x40fe has been reserved
[ 0.257785] system 00:05: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.257788] system 00:05: iomem range 0xfed45000-0xfed89fff has been reserved
[ 0.257792] system 00:05: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.257796] system 00:05: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.257805] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.257809] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.257816] system 00:09: ioport range 0x25c-0x25c has been reserved
[ 0.257819] system 00:09: ioport range 0x25d-0x25d has been reserved
[ 0.257822] system 00:09: ioport range 0x25e-0x25e has been reserved
[ 0.257826] system 00:09: ioport range 0x25f-0x25f has been reserved
[ 0.257833] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.257840] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.257843] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 0.257847] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.257851] system 00:0b: iomem range 0x100000-0x6fffffff could not be reserved
[ 0.292690] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.292697] pci 0000:00:01.0: IO window: 0x7000-0x7fff
[ 0.292702] pci 0000:00:01.0: MEM window: 0xf8800000-0xf88fffff
[ 0.292707] pci 0000:00:01.0: PREFETCH window: 0x8ff00000-0xafefffff
[ 0.292712] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.292715] pci 0000:00:04.0: IO window: disabled
[ 0.292720] pci 0000:00:04.0: MEM window: 0xf8900000-0xf89fffff
[ 0.292724] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.292730] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
[ 0.292734] pci 0000:00:05.0: IO window: 0x8000-0x9fff
[ 0.292739] pci 0000:00:05.0: MEM window: 0xf8a00000-0xfc9fffff
[ 0.292743] pci 0000:00:05.0: PREFETCH window: 0x000000aff00000-0x000000cfefffff
[ 0.292749] pci 0000:00:06.0: PCI bridge, secondary bus 0000:06
[ 0.292752] pci 0000:00:06.0: IO window: disabled
[ 0.292756] pci 0000:00:06.0: MEM window: disabled
[ 0.292760] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.292766] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
[ 0.292768] pci 0000:00:07.0: IO window: disabled
[ 0.292773] pci 0000:00:07.0: MEM window: disabled
[ 0.292777] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.292803] pci 0000:08:01.0: CardBus bridge, secondary bus 0000:09
[ 0.292806] pci 0000:08:01.0: IO window: 0x00a000-0x00a0ff
[ 0.292813] pci 0000:08:01.0: IO window: 0x00a400-0x00a4ff
[ 0.292820] pci 0000:08:01.0: PREFETCH window: 0xd0000000-0xd3ffffff
[ 0.292827] pci 0000:08:01.0: MEM window: 0x70000000-0x73ffffff
[ 0.292834] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[ 0.292839] pci 0000:00:14.4: IO window: 0xa000-0xbfff
[ 0.292847] pci 0000:00:14.4: MEM window: 0xfca00000-0xfeafffff
[ 0.292853] pci 0000:00:14.4: PREFETCH window: 0xcff00000-0xdfefffff
[ 0.292881] pci 0000:00:04.0: setting latency timer to 64
[ 0.292891] pci 0000:00:05.0: setting latency timer to 64
[ 0.292906] pci 0000:00:06.0: setting latency timer to 64
[ 0.292920] pci 0000:00:07.0: setting latency timer to 64
[ 0.292958] alloc irq_desc for 21 on node -1
[ 0.292961] alloc kstat_irqs on node -1
[ 0.292973] pci 0000:08:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.292983] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.292987] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.292990] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff]
[ 0.292993] pci_bus 0000:01: resource 1 mem: [0xf8800000-0xf88fffff]
[ 0.292996] pci_bus 0000:01: resource 2 pref mem [0x8ff00000-0xafefffff]
[ 0.293000] pci_bus 0000:02: resource 1 mem: [0xf8900000-0xf89fffff]
[ 0.293003] pci_bus 0000:03: resource 0 io: [0x8000-0x9fff]
[ 0.293006] pci_bus 0000:03: resource 1 mem: [0xf8a00000-0xfc9fffff]
[ 0.293009] pci_bus 0000:03: resource 2 pref mem [0xaff00000-0xcfefffff]
[ 0.293013] pci_bus 0000:08: resource 0 io: [0xa000-0xbfff]
[ 0.293016] pci_bus 0000:08: resource 1 mem: [0xfca00000-0xfeafffff]
[ 0.293019] pci_bus 0000:08: resource 2 pref mem [0xcff00000-0xdfefffff]
[ 0.293022] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 0.293025] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[ 0.293029] pci_bus 0000:09: resource 0 io: [0xa000-0xa0ff]
[ 0.293032] pci_bus 0000:09: resource 1 io: [0xa400-0xa4ff]
[ 0.293035] pci_bus 0000:09: resource 2 pref mem [0xd0000000-0xd3ffffff]
[ 0.293038] pci_bus 0000:09: resource 3 mem: [0x70000000-0x73ffffff]
[ 0.293097] NET: Registered protocol family 2
[ 0.293239] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.293778] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.295489] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.296615] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.296621] TCP reno registered
[ 0.296846] NET: Registered protocol family 1
[ 0.296878] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.296993] pci 0000:01:05.0: Boot video device
[ 0.297068] Simple Boot Flag at 0xff set to 0x1
[ 0.297315] cpufreq-nforce2: No nForce2 chipset.
[ 0.297356] Scanning for low memory corruption every 60 seconds
[ 0.297565] audit: initializing netlink socket (disabled)
[ 0.297589] type=2000 audit(1273089612.294:1): initialized
[ 0.308981] highmem bounce pool size: 64 pages
[ 0.308990] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.311043] VFS: Disk quotas dquot_6.5.2
[ 0.311138] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.311917] fuse init (API version 7.13)
[ 0.312035] msgmni has been set to 1696
[ 0.312362] alg: No test for stdrng (krng)
[ 0.312455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.312460] io scheduler noop registered
[ 0.312462] io scheduler anticipatory registered
[ 0.312464] io scheduler deadline registered
[ 0.312516] io scheduler cfq registered (default)
[ 0.312741] alloc irq_desc for 24 on node -1
[ 0.312743] alloc kstat_irqs on node -1
[ 0.312758] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.312767] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.312877] alloc irq_desc for 25 on node -1
[ 0.312880] alloc kstat_irqs on node -1
[ 0.312886] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[ 0.312894] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.313010] alloc irq_desc for 26 on node -1
[ 0.313012] alloc kstat_irqs on node -1
[ 0.313019] pcieport 0000:00:06.0: irq 26 for MSI/MSI-X
[ 0.313026] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.313163] alloc irq_desc for 27 on node -1
[ 0.313166] alloc kstat_irqs on node -1
[ 0.313172] pcieport 0000:00:07.0: irq 27 for MSI/MSI-X
[ 0.313180] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.313262] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.313365] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.313604] ACPI: AC Adapter [AC0] (on-line)
[ 0.313705] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.315275] ACPI: Lid Switch [LID]
[ 0.315351] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.315360] ACPI: Power Button [PWRB]
[ 0.315415] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.315421] ACPI: Sleep Button [SLPB]
[ 0.315472] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.315475] ACPI: Power Button [PWRF]
[ 0.316790] ACPI: SSDT 6ffbe2a0 00D1C (v01 AMI CPU1PM 00000001 INTL 20051117)
[ 0.317987] Marking TSC unstable due to TSC halts in idle
[ 0.318162] processor LNXCPU:00: registered as cooling_device0
[ 0.318937] ACPI: SSDT 6ffbefc0 00D1C (v01 AMI CPU2PM 00000001 INTL 20051117)
[ 0.320185] processor LNXCPU:01: registered as cooling_device1
[ 0.322266] Switching to clocksource acpi_pm
[ 0.324386] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.324400] ACPI: Thermal Zone [THRM] (56 C)
[ 0.326408] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.328177] brd: module loaded
[ 0.328767] loop: module loaded
[ 0.328908] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.329156] alloc irq_desc for 16 on node -1
[ 0.329160] alloc kstat_irqs on node -1
[ 0.329170] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.329231] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.329628] Fixed MDIO Bus: probed
[ 0.329671] PPP generic driver version 2.4.2
[ 0.329738] tun: Universal TUN/TAP device driver, 1.6
[ 0.329740] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.329850] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.329885] alloc irq_desc for 19 on node -1
[ 0.329887] alloc kstat_irqs on node -1
[ 0.329893] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.329920] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 0.329977] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 0.330015] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 0.330035] ehci_hcd 0000:00:13.5: debug port 1
[ 0.330066] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfebff800
[ 0.330513] isapnp: Scanning for PnP cards...
[ 0.369199] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 0.369410] usb usb1: configuration #1 chosen from 1 choice
[ 0.369449] hub 1-0:1.0: USB hub found
[ 0.369466] hub 1-0:1.0: 10 ports detected
[ 0.369579] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.369614] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.369647] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.369694] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.369735] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000
[ 0.429514] usb usb2: configuration #1 chosen from 1 choice
[ 0.429552] hub 2-0:1.0: USB hub found
[ 0.429568] hub 2-0:1.0: 2 ports detected
[ 0.429650] alloc irq_desc for 17 on node -1
[ 0.429653] alloc kstat_irqs on node -1
[ 0.429663] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.429693] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.429740] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.429780] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfd000
[ 0.434140] Freeing initrd memory: 7788k freed
[ 0.484918] ACPI: Battery Slot [BAT0] (battery present)
[ 0.489200] usb usb3: configuration #1 chosen from 1 choice
[ 0.489243] hub 3-0:1.0: USB hub found
[ 0.489263] hub 3-0:1.0: 2 ports detected
[ 0.489347] alloc irq_desc for 18 on node -1
[ 0.489350] alloc kstat_irqs on node -1
[ 0.489363] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.489392] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 0.489446] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.489489] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfebfc000
[ 0.559522] usb usb4: configuration #1 chosen from 1 choice
[ 0.559560] hub 4-0:1.0: USB hub found
[ 0.559574] hub 4-0:1.0: 2 ports detected
[ 0.559634] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.559646] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 0.559691] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 0.559711] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfebfb000
[ 0.644114] usb usb5: configuration #1 chosen from 1 choice
[ 0.644146] hub 5-0:1.0: USB hub found
[ 0.644162] hub 5-0:1.0: 2 ports detected
[ 0.644220] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.644232] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 0.644278] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 0.644305] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfebfa000
[ 0.690239] isapnp: No Plug & Play device found
[ 0.700097] usb usb6: configuration #1 chosen from 1 choice
[ 0.700128] hub 6-0:1.0: USB hub found
[ 0.700141] hub 6-0:1.0: 2 ports detected
[ 0.700217] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.700354] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.704692] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.704702] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.704864] mice: PS/2 mouse device common for all mice
[ 0.705076] rtc_cmos 00:02: RTC can wake from S4
[ 0.705141] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.705173] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.705315] device-mapper: uevent: version 1.0.3
[ 0.705492] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.705632] device-mapper: multipath: version 1.1.0 loaded
[ 0.705636] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.705802] EISA: Probing bus 0 at eisa.0
[ 0.705825] Cannot allocate resource for EISA slot 4
[ 0.705837] Cannot allocate resource for EISA slot 7
[ 0.705840] Cannot allocate resource for EISA slot 8
[ 0.705842] EISA: Detected 0 cards.
[ 0.706082] cpuidle: using governor ladder
[ 0.706196] cpuidle: using governor menu
[ 0.706734] TCP cubic registered
[ 0.706930] NET: Registered protocol family 10
[ 0.707492] lo: Disabled Privacy Extensions
[ 0.707898] NET: Registered protocol family 17
[ 0.724747] Using IPI No-Shortcut mode
[ 0.724854] PM: Resume from disk failed.
[ 0.724872] registered taskstats version 1
[ 0.725350] Magic number: 10:451:42
[ 0.725368] bdi 7:7: hash matches
[ 0.725500] rtc_cmos 00:02: setting system clock to 2010-05-05 20:00:13 UTC (1273089613)
[ 0.725504] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.725506] EDD information not available.
[ 0.725582] Freeing unused kernel memory: 656k freed
[ 0.726350] Write protecting the kernel text: 4676k
[ 0.726411] Write protecting the kernel read-only data: 1840k
[ 0.737631] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.767446] udev: starting version 151
[ 0.896165] scsi0 : pata_atiixp
[ 0.906062] scsi1 : pata_atiixp
[ 0.907386] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 0.907391] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 0.915182] ahci 0000:00:12.0: version 3.0
[ 0.915213] alloc irq_desc for 22 on node -1
[ 0.915215] alloc kstat_irqs on node -1
[ 0.915226] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.915270] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 0.915415] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.915420] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 0.933143] scsi2 : ahci
[ 0.937953] scsi3 : ahci
[ 0.938648] scsi4 : ahci
[ 0.938893] scsi5 : ahci
[ 0.939098] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
[ 0.939103] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
[ 0.939108] ata5: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
[ 0.939112] ata6: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
[ 1.076604] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33
[ 1.092567] ata1.01: configured for UDMA/33
[ 1.098030] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WR02 PQ: 0 ANSI: 5
[ 1.109337] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.109343] Uniform CD-ROM driver Revision: 3.20
[ 1.109515] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.109627] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.256078] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.256150] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.256185] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.420081] ata3: softreset failed (device not ready)
[ 1.420086] ata3: applying SB600 PMP SRST workaround and retrying
[ 1.584076] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.584982] ata3.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133
[ 1.584986] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.585011] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.586115] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.586118] ata3.00: configured for UDMA/133
[ 1.586297] scsi 2:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5
[ 1.586552] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.586659] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.586732] sd 2:0:0:0: [sda] Write Protect is off
[ 1.586736] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.586767] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.586945] sda: sda1 sda2 < sda5 >
[ 1.621148] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.624700] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.624735] 8139cp 0000:08:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.628617] 8139too Fast Ethernet driver 0.9.28
[ 1.628693] alloc irq_desc for 20 on node -1
[ 1.628696] alloc kstat_irqs on node -1
[ 1.628707] 8139too 0000:08:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.631174] eth0: RealTek RTL8139 at 0xb800, 00:1d:60:41:63:2b, IRQ 20
[ 1.916506] kjournald starting. Commit interval 5 seconds
[ 1.916530] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.220461] udev: starting version 151
[ 46.247481] Adding 5277312k swap on /dev/sda5. Priority:-1 extents:1 across:5277312k
[ 46.330151] asus_laptop: Asus Laptop Support version 0.42
[ 46.437299] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 46.466971] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0f]
[ 46.466976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 46.476555] Linux agpgart interface v0.103
[ 46.482689] acpi device:02: registered as cooling_device2
[ 46.482869] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6
[ 46.482966] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 46.502669] asus_laptop: BSTS called, 0x22 returned
[ 46.502721] asus_laptop: X51R model detected
[ 46.503412] input: Asus Laptop extra buttons as /devices/virtual/input/input7
[ 46.517190] sdhci: Secure Digital Host Controller Interface driver
[ 46.517197] sdhci: Copyright(c) Pierre Ossman
[ 46.546783] sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 17)
[ 46.546822] alloc irq_desc for 23 on node -1
[ 46.546825] alloc kstat_irqs on node -1
[ 46.546839] sdhci-pci 0000:08:01.1: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 46.549049] Registered led device: mmc0::
[ 46.550099] mmc0: SDHCI controller on PCI [0000:08:01.1] using PIO
[ 46.557116] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[ 46.618148] lp: driver loaded but no devices found
[ 46.627342] yenta_cardbus 0000:08:01.0: CardBus bridge found [1043:1627]
[ 46.690870] [drm] Initialized drm 1.1.0 20060810
[ 46.746536] cfg80211: Calling CRDA to update world regulatory domain
[ 46.763506] yenta_cardbus 0000:08:01.0: ISA IRQ mask 0x0cb8, PCI irq 21
[ 46.763514] yenta_cardbus 0000:08:01.0: Socket status: 30000006
[ 46.763519] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[ 46.763535] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
[ 46.763540] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xbfff: clean.
[ 46.764221] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge Memory window: 0xfca00000 - 0xfeafffff
[ 46.764226] yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xdfefffff
[ 46.770941] type=1505 audit(1273089659.542:2): operation="profile_load" pid=591 name="/sbin/dhclient3"
[ 46.771645] type=1505 audit(1273089659.542:3): operation="profile_load" pid=591 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 46.772113] type=1505 audit(1273089659.546:4): operation="profile_load" pid=591 name="/usr/lib/connman/scripts/dhclient-script"
[ 46.775800] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.791693] cfg80211: World regulatory domain updated:
[ 46.791700] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 46.791704] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 46.791707] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 46.791710] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 46.791713] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 46.791716] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 46.809543] [drm] radeon defaulting to kernel modesetting.
[ 46.809550] [drm] radeon kernel modesetting enabled.
[ 46.809651] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 46.823187] [drm] radeon: Initializing kernel modesetting.
[ 46.828136] [drm] register mmio base: 0xF88F0000
[ 46.828140] [drm] register mmio size: 65536
[ 46.828458] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 46.828482] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[ 46.828534] [drm] Generation 2 PCI interface, using max accessible memory
[ 46.828537] [drm] radeon: VRAM 256M
[ 46.828540] [drm] radeon: VRAM from 0x70000000 to 0x7FFFFFFF
[ 46.828542] [drm] radeon: GTT 32M
[ 46.828544] [drm] radeon: GTT from 0x80000000 to 0x81FFFFFF
[ 46.828591] [drm] radeon: irq initialized.
[ 46.829086] [drm] Detected VRAM RAM=256M, BAR=256M
[ 46.829091] [drm] RAM width 128bits DDR
[ 46.829231] [TTM] Zone kernel: Available graphics memory: 438598 kiB.
[ 46.829234] [TTM] Zone highmem: Available graphics memory: 901274 kiB.
[ 46.829258] [drm] radeon: 256M of VRAM memory ready
[ 46.829260] [drm] radeon: 32M of GTT memory ready.
[ 46.829284] [drm] GART: num cpu pages 8192, num gpu pages 8192
[ 46.829981] [drm] radeon: 2 quad pipes, 1 z pipes initialized.
[ 46.830001] [drm] radeon: cp idle (0x10000C03)
[ 46.830065] [drm] Loading R300 Microcode
[ 46.830070] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 46.893541] [drm] radeon: ring at 0x0000000080000000
[ 46.893570] [drm] ring test succeeded in 0 usecs
[ 46.893759] [drm] radeon: ib pool ready.
[ 46.893866] [drm] ib test succeeded in 0 usecs
[ 46.894022] [drm] Panel ID String: CMO
[ 46.894025] [drm] Panel Size 1280x800
[ 46.894083] [drm] Radeon Display Connectors
[ 46.894085] [drm] Connector 0:
[ 46.894087] [drm] VGA
[ 46.894090] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 46.894093] [drm] Encoders:
[ 46.894095] [drm] CRT1: INTERNAL_DAC2
[ 46.894097] [drm] Connector 1:
[ 46.894099] [drm] LVDS
[ 46.894101] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 46.894104] [drm] Encoders:
[ 46.894105] [drm] LCD1: INTERNAL_LVDS
[ 46.896059] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 46.896076] ath5k 0000:02:00.0: setting latency timer to 64
[ 46.896150] ath5k 0000:02:00.0: registered as 'phy0'
[ 47.038373] [drm] fb mappable at 0x90040000
[ 47.038378] [drm] vram apper at 0x90000000
[ 47.038380] [drm] size 4096000
[ 47.038382] [drm] fb depth is 24
[ 47.038384] [drm] pitch is 5120
[ 47.038615] fb0: radeondrmfb frame buffer device
[ 47.038618] registered panic notifier
[ 47.038625] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 47.044372] vga16fb: initializing
[ 47.044378] vga16fb: mapped to 0xc00a0000
[ 47.044383] vga16fb: not registering due to another framebuffer present
[ 47.128042] Console: switching to colour frame buffer device 160x50
[ 47.245702] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 47.271729] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 47.273956] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 47.273962] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 47.273964] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 47.313030] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 47.416468] ath: EEPROM regdomain: 0x60
[ 47.416473] ath: EEPROM indicates we should expect a direct regpair map
[ 47.416479] ath: Country alpha2 being used: 00
[ 47.416481] ath: Regpair used: 0x60
[ 47.437989] phy0: Selected rate control algorithm 'minstrel'
[ 47.439082] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa0, PHY: 0x61)
[ 47.440328] hda_codec: ALC660-VD: BIOS auto-probing.
[ 47.441147] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[ 47.533498] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 47.535807] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 47.536795] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 47.537611] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 47.538465] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 47.605870] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 47.653892] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 50.336420] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 50.336824] EXT3 FS on sda1, internal journal
[ 50.648103] type=1505 audit(1273089663.419:5): operation="profile_load" pid=934 name="/usr/share/gdm/guest-session/Xsession"
[ 50.650628] type=1505 audit(1273089663.423:6): operation="profile_replace" pid=936 name="/sbin/dhclient3"
[ 50.651341] type=1505 audit(1273089663.423:7): operation="profile_replace" pid=936 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 50.651735] type=1505 audit(1273089663.423:8): operation="profile_replace" pid=936 name="/usr/lib/connman/scripts/dhclient-script"
[ 50.658879] type=1505 audit(1273089663.431:9): operation="profile_load" pid=939 name="/usr/bin/evince"
[ 50.668088] type=1505 audit(1273089663.439:10): operation="profile_load" pid=939 name="/usr/bin/evince-previewer"
[ 50.677142] type=1505 audit(1273089663.451:11): operation="profile_load" pid=939 name="/usr/bin/evince-thumbnailer"
[ 50.854757] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 50.867439] eth0: link down
[ 50.867714] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 51.265098] apm: BIOS not found.Hors ligne
#50 Le 05/05/2010, à 21:16
- grandtoubab
Re : Lucid : Démarrage encore plus lent qu'avant ?
faut lire messieurs
http://ubuntuforums.org/showthread.php?t=1434502
To force a reprofile, simply remove the "pack" files in /var/lib/ureadahead and reboot.
Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....
Hors ligne