Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2 3

#51 Le 08/05/2010, à 18:25

PPdM

Re : connection filaire qui s'arrete et plantage systeme

@spad35
Ce que tu dis me confirme dans mon idée d'un souci, soit matériel, soit, plus vraisemblable, de version de firmware, il faudrait voir quel bios tu as  par rapport a miauco

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#52 Le 08/05/2010, à 19:21

spad35

Re : connection filaire qui s'arrete et plantage systeme

salut pierguiard

voici la version du bios :

description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: A1058AMS V1.15 (06/20/2006)
          size: 64KiB
          capacity: 448KiB

Pendant longtemps j'ai été obligé d'ajouter des options au boot .Peut être devrait il essayer
acpi=off  ou mieux  hpet=disable J'ai eu beaucoup de problèmes avec la gestion de l'acpi

Hors ligne

#53 Le 09/05/2010, à 16:38

mlauco

Re : connection filaire qui s'arrete et plantage systeme

salut a vous tous
bon alors dans l'ordre deja ca marche tjs pas bon c'est dit.
mon bios american megatrends v02.58
firmware information
bios build A1058AMS ver 7.12 05/14/2007
ec build 1058EMS ver 3.01 05/14/2007

info pc
megabook S271
model MS-1058

par contre quand tu dis Pendant longtemps j'ai été obligé d'ajouter des options au boot .Peut être devrait il essayer
acpi=off  ou mieux  hpet=disable J'ai eu beaucoup de problèmes avec la gestion de l'acpi
je sais pas comment faire ca

apparement j'ai le dernier firmware du bios ca tombe bien car quand j'ai eu l'ordi je l'ai eu sans dique dur et pas de cd de reinstalation donc j'ai installer win 7 et je ne peux pas creer de disquette de boot sous seven .
ce qui m'interresserai beaucoup ca serai que tu m'envoies une copie du ou des cd d'instal d'origine du pc evidement a mes frais
bon je vais voir dans la doc si je trouve comment changer les options du boot
merci pour vos recherches en attendant

Hors ligne

#54 Le 09/05/2010, à 17:23

mlauco

Re : connection filaire qui s'arrete et plantage systeme

bon jeviens de remarquer quelque qui pourrais effectivement avoir un rapport avec l'acpi en fait quand je connecte l'ordi en filaire ca ne marche pas mais l'ordi reste disponible je peux m'en servir mais si je n'y touche pas pendant quelque minutes quand je veux bouger la sourie il est planter grave et je suis obliger de l'eteindre comme une brute.

Hors ligne

#55 Le 09/05/2010, à 17:54

PPdM

Re : connection filaire qui s'arrete et plantage systeme

mlauco a écrit :

bon jeviens de remarquer quelque qui pourrais effectivement avoir un rapport avec l'acpi en fait quand je connecte l'ordi en filaire ca ne marche pas mais l'ordi reste disponible je peux m'en servir mais si je n'y touche pas pendant quelque minutes quand je veux bouger la sourie il est planter grave et je suis obliger de l'eteindre comme une brute.

Il me semble que j'ai déjà vu ce bug sur le forum il y a quelque semaines, mais je ne sais plus ou, effectivement c'est un souci acpi

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#56 Le 09/05/2010, à 19:00

spad35

Re : connection filaire qui s'arrete et plantage systeme

Salut mlauco

Il faudrait commencer par analyser le problème. Peux-tu acceder à une console (<ctrl><alt><F1> ) quand ça plante ? si oui essaye un top pour voir quel processus bloque ou
un

dmesg | tail > log.txt

ou si tu es obligé d'éteindre va voir dans visionneur de journaux système la cause du plantage

Sinon pour ta connection si c'est un problème d'autonegotiation utilise l'outil " mii-tool"

-R, --reset
              Reset the MII to its default configuration.

ou

-F media, --force=media
              Disable autonegotiation, and force the MII to either  100baseTx-
              FD, 100baseTx-HD, 10baseT-FD, or 10baseT-HD operation.

voir man mii-tool

EDIT
je viens de repenser que sous jaunty, je crois, j'avais des problèmes de déconnection permanents et de perte totale de réseau en wi-fi cette fois. J'avais installé les backports-modules et tout est rentré dans l'ordre.
C'est peut être une piste a explorer
linux-backports-modules-2.6.xx-xx-generic (ou xx-xx est la version de ton noyau) dans synaptic

Dernière modification par spad35 (Le 09/05/2010, à 19:26)

Hors ligne

#57 Le 09/05/2010, à 20:51

mlauco

Re : connection filaire qui s'arrete et plantage systeme

salut spad35

bon alors deja quand mon pc plante c'est fini sourie bloque et plus rien a faire donc pour le dsmsg ca le fait pas
pour le message evenement systeme ca donne ca juste apres un plantage

May  9 16:20:05 msi kernel: imklog 4.2.0, log source = /proc/kmsg started.
May  9 16:20:05 msi rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="431" x-info="http://www.rsyslog.com"] (re)start
May  9 16:20:05 msi rsyslogd: rsyslogd's groupid changed to 103
May  9 16:20:05 msi rsyslogd: rsyslogd's userid changed to 101
May  9 16:20:05 msi kernel: [    0.000000] Initializing cgroup subsys cpuset
May  9 16:20:05 msi kernel: [    0.000000] Initializing cgroup subsys cpu
May  9 16:20:05 msi kernel: [    0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
May  9 16:20:05 msi kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=0c688f4a-70d3-4ae9-b4d4-b04d58babf0e ro quiet splash
May  9 16:20:05 msi kernel: [    0.000000] KERNEL supported cpus:
May  9 16:20:05 msi kernel: [    0.000000]   Intel GenuineIntel
May  9 16:20:05 msi kernel: [    0.000000]   AMD AuthenticAMD
May  9 16:20:05 msi kernel: [    0.000000]   Centaur CentaurHauls
May  9 16:20:05 msi kernel: [    0.000000] BIOS-provided physical RAM map:
May  9 16:20:05 msi kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
May  9 16:20:05 msi kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
May  9 16:20:05 msi kernel: [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
May  9 16:20:05 msi kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable)
May  9 16:20:05 msi kernel: [    0.000000]  BIOS-e820: 0000000077fd0000 - 0000000077fde000 (ACPI data)
May  9 16:20:05 msi kernel: [    0.000000]  BIOS-e820: 0000000077fde000 - 0000000078000000 (ACPI NVS)
May  9 16:20:05 msi kernel: [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
May  9 16:20:05 msi kernel: [    0.000000] DMI present.
May  9 16:20:05 msi kernel: [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
May  9 16:20:05 msi kernel: [    0.000000] last_pfn = 0x77fd0 max_arch_pfn = 0x400000000
May  9 16:20:05 msi kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
May  9 16:20:05 msi kernel: [    0.000000] Scanning 0 areas for low memory corruption
May  9 16:20:05 msi kernel: [    0.000000] modified physical RAM map:
May  9 16:20:05 msi kernel: [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
May  9 16:20:05 msi kernel: [    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
May  9 16:20:05 msi kernel: [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
May  9 16:20:05 msi kernel: [    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
May  9 16:20:05 msi kernel: [    0.000000]  modified: 0000000000100000 - 0000000077fd0000 (usable)
May  9 16:20:05 msi kernel: [    0.000000]  modified: 0000000077fd0000 - 0000000077fde000 (ACPI data)
May  9 16:20:05 msi kernel: [    0.000000]  modified: 0000000077fde000 - 0000000078000000 (ACPI NVS)
May  9 16:20:05 msi kernel: [    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
May  9 16:20:05 msi kernel: [    0.000000] init_memory_mapping: 0000000000000000-0000000077fd0000
May  9 16:20:05 msi kernel: [    0.000000] NX (Execute Disable) protection: active
May  9 16:20:05 msi kernel: [    0.000000] RAMDISK: 377ff000 - 37fef584
May  9 16:20:05 msi kernel: [    0.000000] ACPI: RSDP 00000000000f8b20 00014 (v00 M S I )
May  9 16:20:05 msi kernel: [    0.000000] ACPI: RSDT 0000000077fd0000 00038 (v01 MSI_NB MEGABOOK 04162004 MSFT 00000097)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: FACP 0000000077fd0200 00084 (v02 M S I  1058     04162004 MSFT 00000097)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: DSDT 0000000077fd05b0 04248 (v01 M S I  1058     04162004 INTL 02002026)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: FACS 0000000077fde000 00040
May  9 16:20:05 msi kernel: [    0.000000] ACPI: APIC 0000000077fd0390 0005C (v01 M S I  OEMAPIC  04162004 MSFT 00000097)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: MCFG 0000000077fd03f0 0003C (v01 M S I  OEMMCFG  04162004 MSFT 00000097)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: SLIC 0000000077fd0430 00176 (v01 MSI_NB MEGABOOK 04162004 MSFT 00000097)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: OEMB 0000000077fde040 00056 (v01 M S I  AMI_OEM  04162004 MSFT 00000097)
May  9 16:20:05 msi kernel: [    0.000000] Scanning NUMA topology in Northbridge 24
May  9 16:20:05 msi kernel: [    0.000000] No NUMA configuration found
May  9 16:20:05 msi kernel: [    0.000000] Faking a node at 0000000000000000-0000000077fd0000
May  9 16:20:05 msi kernel: [    0.000000] Bootmem setup node 0 0000000000000000-0000000077fd0000
May  9 16:20:05 msi kernel: [    0.000000]   NODE_DATA [0000000000012000 - 0000000000016fff]
May  9 16:20:05 msi kernel: [    0.000000]   bootmap [0000000000017000 -  0000000000025fff] pages f
May  9 16:20:05 msi kernel: [    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0077fd0000]
May  9 16:20:05 msi kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
May  9 16:20:05 msi kernel: [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
May  9 16:20:05 msi kernel: [    0.000000]   #2 [0001000000 - 0001a29e64]    TEXT DATA BSS ==> [0001000000 - 0001a29e64]
May  9 16:20:05 msi kernel: [    0.000000]   #3 [00377ff000 - 0037fef584]          RAMDISK ==> [00377ff000 - 0037fef584]
May  9 16:20:05 msi kernel: [    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
May  9 16:20:05 msi kernel: [    0.000000]   #5 [0001a2a000 - 0001a2a17d]              BRK ==> [0001a2a000 - 0001a2a17d]
May  9 16:20:05 msi kernel: [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
May  9 16:20:05 msi kernel: [    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
May  9 16:20:05 msi kernel: [    0.000000] Zone PFN ranges:
May  9 16:20:05 msi kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
May  9 16:20:05 msi kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
May  9 16:20:05 msi kernel: [    0.000000]   Normal   0x00100000 -> 0x00100000
May  9 16:20:05 msi kernel: [    0.000000] Movable zone start PFN for each node
May  9 16:20:05 msi kernel: [    0.000000] early_node_map[2] active PFN ranges
May  9 16:20:05 msi kernel: [    0.000000]     0: 0x00000010 -> 0x0000009f
May  9 16:20:05 msi kernel: [    0.000000]     0: 0x00000100 -> 0x00077fd0
May  9 16:20:05 msi kernel: [    0.000000] Detected use of extended apic ids on hypertransport bus
May  9 16:20:05 msi kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x808
May  9 16:20:05 msi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
May  9 16:20:05 msi kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
May  9 16:20:05 msi kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May  9 16:20:05 msi kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
May  9 16:20:05 msi kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
May  9 16:20:05 msi kernel: [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
May  9 16:20:05 msi kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
May  9 16:20:05 msi kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
May  9 16:20:05 msi kernel: [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
May  9 16:20:05 msi kernel: [    0.000000] Allocating PCI resources starting at 78000000 (gap: 78000000:87f80000)
May  9 16:20:05 msi kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
May  9 16:20:05 msi kernel: [    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
May  9 16:20:05 msi kernel: [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576
May  9 16:20:05 msi kernel: [    0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152
May  9 16:20:05 msi kernel: [    0.000000] pcpu-alloc: [0] 0 1 
May  9 16:20:05 msi kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 484538
May  9 16:20:05 msi kernel: [    0.000000] Policy zone: DMA32
May  9 16:20:05 msi kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=0c688f4a-70d3-4ae9-b4d4-b04d58babf0e ro quiet splash
May  9 16:20:05 msi kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
May  9 16:20:05 msi kernel: [    0.000000] Initializing CPU#0
May  9 16:20:05 msi kernel: [    0.000000] Checking aperture...
May  9 16:20:05 msi kernel: [    0.000000] No AGP bridge found
May  9 16:20:05 msi kernel: [    0.000000] Node 0: aperture @ 586c000000 size 32 MB
May  9 16:20:05 msi kernel: [    0.000000] Aperture beyond 4GB. Ignoring.
May  9 16:20:05 msi kernel: [    0.000000] Memory: 1917816k/1965888k available (5409k kernel code, 452k absent, 47620k reserved, 2976k data, 876k init)
May  9 16:20:05 msi kernel: [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
May  9 16:20:05 msi kernel: [    0.000000] Hierarchical RCU implementation.
May  9 16:20:05 msi kernel: [    0.000000] NR_IRQS:4352 nr_irqs:424
May  9 16:20:05 msi kernel: [    0.000000] Console: colour VGA+ 80x25
May  9 16:20:05 msi kernel: [    0.000000] console [tty0] enabled
May  9 16:20:05 msi kernel: [    0.000000] allocated 19660800 bytes of page_cgroup
May  9 16:20:05 msi kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
May  9 16:20:05 msi kernel: [    0.000000] Fast TSC calibration failed
May  9 16:20:05 msi kernel: [    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
May  9 16:20:05 msi kernel: [    0.000000] Detected 2194.480 MHz processor.
May  9 16:20:05 msi kernel: [    0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.96 BogoMIPS (lpj=21944800)
May  9 16:20:05 msi kernel: [    0.010035] Security Framework initialized
May  9 16:20:05 msi kernel: [    0.010056] AppArmor: AppArmor initialized
May  9 16:20:05 msi kernel: [    0.010245] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
May  9 16:20:05 msi kernel: [    0.011682] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
May  9 16:20:05 msi kernel: [    0.012178] Mount-cache hash table entries: 256
May  9 16:20:05 msi kernel: [    0.012331] Initializing cgroup subsys ns
May  9 16:20:05 msi kernel: [    0.012335] Initializing cgroup subsys cpuacct
May  9 16:20:05 msi kernel: [    0.012339] Initializing cgroup subsys memory
May  9 16:20:05 msi kernel: [    0.012348] Initializing cgroup subsys devices
May  9 16:20:05 msi kernel: [    0.012350] Initializing cgroup subsys freezer
May  9 16:20:05 msi kernel: [    0.012352] Initializing cgroup subsys net_cls
May  9 16:20:05 msi kernel: [    0.012373] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
May  9 16:20:05 msi kernel: [    0.012375] CPU: L2 Cache: 512K (64 bytes/line)
May  9 16:20:05 msi kernel: [    0.012377] CPU 0/0x0 -> Node 0
May  9 16:20:05 msi kernel: [    0.012398] mce: CPU supports 5 MCE banks
May  9 16:20:05 msi kernel: [    0.012410] using C1E aware idle routine
May  9 16:20:05 msi kernel: [    0.012412] Performance Events: AMD PMU driver.
May  9 16:20:05 msi kernel: [    0.012417] ... version:                0
May  9 16:20:05 msi kernel: [    0.012419] ... bit width:              48
May  9 16:20:05 msi kernel: [    0.012420] ... generic registers:      4
May  9 16:20:05 msi kernel: [    0.012422] ... value mask:             0000ffffffffffff
May  9 16:20:05 msi kernel: [    0.012424] ... max period:             00007fffffffffff
May  9 16:20:05 msi kernel: [    0.012425] ... fixed-purpose events:   0
May  9 16:20:05 msi kernel: [    0.012427] ... event mask:             000000000000000f
May  9 16:20:05 msi kernel: [    0.012440] SMP alternatives: switching to UP code
May  9 16:20:05 msi kernel: [    0.028422] ACPI: Core revision 20090903
May  9 16:20:05 msi kernel: [    0.035264] ftrace: converting mcount calls to 0f 1f 44 00 00
May  9 16:20:05 msi kernel: [    0.035270] ftrace: allocating 22518 entries in 89 pages
May  9 16:20:05 msi kernel: [    0.040097] Setting APIC routing to flat
May  9 16:20:05 msi kernel: [    0.040443] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
May  9 16:20:05 msi kernel: [    0.142252] CPU0: AMD Turion(tm) 64 Mobile Technology MK-38 stepping 02
May  9 16:20:05 msi kernel: [    0.150000] Brought up 1 CPUs
May  9 16:20:05 msi kernel: [    0.150000] Total of 1 processors activated (4388.96 BogoMIPS).
May  9 16:20:05 msi kernel: [    0.150000] devtmpfs: initialized
May  9 16:20:05 msi kernel: [    0.150000] regulator: core version 0.5
May  9 16:20:05 msi kernel: [    0.150000] Time: 16:19:48  Date: 05/09/10
May  9 16:20:05 msi kernel: [    0.150000] NET: Registered protocol family 16
May  9 16:20:05 msi kernel: [    0.150000] TOM: 0000000080000000 aka 2048M
May  9 16:20:05 msi kernel: [    0.150000] ACPI: bus type pci registered
May  9 16:20:05 msi kernel: [    0.150000] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
May  9 16:20:05 msi kernel: [    0.150000] PCI: Not using MMCONFIG.
May  9 16:20:05 msi kernel: [    0.150000] PCI: Using configuration type 1 for base access
May  9 16:20:05 msi kernel: [    0.150000] bio: create slab <bio-0> at 0
May  9 16:20:05 msi kernel: [    0.150000] ACPI: Executed 2 blocks of module-level executable AML code
May  9 16:20:05 msi kernel: [    0.150000] ACPI: Interpreter enabled
May  9 16:20:05 msi kernel: [    0.150000] ACPI: (supports S0 S3 S4 S5)
May  9 16:20:05 msi kernel: [    0.150000] ACPI: Using IOAPIC for interrupt routing
May  9 16:20:05 msi kernel: [    0.150000] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
May  9 16:20:05 msi kernel: [    0.150000] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
May  9 16:20:05 msi kernel: [    0.152766] PCI: Using MMCONFIG at e0000000 - efffffff
May  9 16:20:05 msi kernel: [    0.153040] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
May  9 16:20:05 msi kernel: [    0.158591] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
May  9 16:20:05 msi kernel: [    0.158800] ACPI: No dock devices found.
May  9 16:20:05 msi kernel: [    0.158918] ACPI: PCI Root Bridge [PCI0] (0000:00)
May  9 16:20:05 msi kernel: [    0.159036] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
May  9 16:20:05 msi kernel: [    0.159039] pci 0000:00:06.0: PME# disabled
May  9 16:20:05 msi kernel: [    0.159072] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
May  9 16:20:05 msi kernel: [    0.159075] pci 0000:00:07.0: PME# disabled
May  9 16:20:05 msi kernel: [    0.159478] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
May  9 16:20:05 msi kernel: [    0.159482] pci 0000:00:13.2: PME# disabled
May  9 16:20:05 msi kernel: [    0.159577] HPET not enabled in BIOS. You might try hpet=force boot option
May  9 16:20:05 msi kernel: [    0.159832] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
May  9 16:20:05 msi kernel: [    0.159836] pci 0000:00:14.2: PME# disabled
May  9 16:20:05 msi kernel: [    0.160328] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
May  9 16:20:05 msi kernel: [    0.160333] pci 0000:04:00.0: PME# disabled
May  9 16:20:05 msi kernel: [    0.160547] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
May  9 16:20:05 msi kernel: [    0.160553] pci 0000:05:04.0: PME# disabled
May  9 16:20:05 msi kernel: [    0.160687] pci 0000:05:04.2: PME# supported from D0 D1 D2 D3hot D3cold
May  9 16:20:05 msi kernel: [    0.160693] pci 0000:05:04.2: PME# disabled
May  9 16:20:05 msi kernel: [    0.160826] pci 0000:05:04.3: PME# supported from D0 D1 D2 D3hot D3cold
May  9 16:20:05 msi kernel: [    0.160831] pci 0000:05:04.3: PME# disabled
May  9 16:20:05 msi kernel: [    0.161028] pci 0000:00:14.4: transparent bridge
May  9 16:20:05 msi kernel: [    0.170078] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
May  9 16:20:05 msi kernel: [    0.170178] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
May  9 16:20:05 msi kernel: [    0.170275] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
May  9 16:20:05 msi kernel: [    0.170371] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
May  9 16:20:05 msi kernel: [    0.170472] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
May  9 16:20:05 msi kernel: [    0.170569] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
May  9 16:20:05 msi kernel: [    0.170662] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
May  9 16:20:05 msi kernel: [    0.170758] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
May  9 16:20:05 msi kernel: [    0.170876] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
May  9 16:20:05 msi kernel: [    0.170881] vgaarb: loaded
May  9 16:20:05 msi kernel: [    0.170993] SCSI subsystem initialized
May  9 16:20:05 msi kernel: [    0.171141] usbcore: registered new interface driver usbfs
May  9 16:20:05 msi kernel: [    0.171151] usbcore: registered new interface driver hub
May  9 16:20:05 msi kernel: [    0.171173] usbcore: registered new device driver usb
May  9 16:20:05 msi kernel: [    0.171295] ACPI: WMI: Mapper loaded
May  9 16:20:05 msi kernel: [    0.171297] PCI: Using ACPI for IRQ routing
May  9 16:20:05 msi kernel: [    0.171460] NetLabel: Initializing
May  9 16:20:05 msi kernel: [    0.171462] NetLabel:  domain hash size = 128
May  9 16:20:05 msi kernel: [    0.171463] NetLabel:  protocols = UNLABELED CIPSOv4
May  9 16:20:05 msi kernel: [    0.171476] NetLabel:  unlabeled traffic allowed by default
May  9 16:20:05 msi kernel: [    0.173169] AppArmor: AppArmor Filesystem Enabled
May  9 16:20:05 msi kernel: [    0.173191] pnp: PnP ACPI init
May  9 16:20:05 msi kernel: [    0.173212] ACPI: bus type pnp registered
May  9 16:20:05 msi kernel: [    0.174816] pnp: PnP ACPI: found 11 devices
May  9 16:20:05 msi kernel: [    0.174818] ACPI: ACPI bus type pnp unregistered
May  9 16:20:05 msi kernel: [    0.174832] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
May  9 16:20:05 msi kernel: [    0.174834] system 00:07: ioport range 0x40b-0x40b has been reserved
May  9 16:20:05 msi kernel: [    0.174837] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
May  9 16:20:05 msi kernel: [    0.174840] system 00:07: ioport range 0xc00-0xc01 has been reserved
May  9 16:20:05 msi kernel: [    0.174842] system 00:07: ioport range 0xc14-0xc14 has been reserved
May  9 16:20:05 msi kernel: [    0.174845] system 00:07: ioport range 0xc50-0xc51 has been reserved
May  9 16:20:05 msi kernel: [    0.174848] system 00:07: ioport range 0xc52-0xc52 has been reserved
May  9 16:20:05 msi kernel: [    0.174850] system 00:07: ioport range 0xc6c-0xc6c has been reserved
May  9 16:20:05 msi kernel: [    0.174853] system 00:07: ioport range 0xc6f-0xc6f has been reserved
May  9 16:20:05 msi kernel: [    0.174856] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
May  9 16:20:05 msi kernel: [    0.174858] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
May  9 16:20:05 msi kernel: [    0.174861] system 00:07: ioport range 0xcd8-0xcdf has been reserved
May  9 16:20:05 msi kernel: [    0.174864] system 00:07: ioport range 0x800-0x89f has been reserved
May  9 16:20:05 msi kernel: [    0.174866] system 00:07: ioport range 0x900-0x90f has been reserved
May  9 16:20:05 msi kernel: [    0.174869] system 00:07: ioport range 0x910-0x91f has been reserved
May  9 16:20:05 msi kernel: [    0.174872] system 00:07: ioport range 0xfe00-0xfefe has been reserved
May  9 16:20:05 msi kernel: [    0.174875] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
May  9 16:20:05 msi kernel: [    0.174881] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
May  9 16:20:05 msi kernel: [    0.174883] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
May  9 16:20:05 msi kernel: [    0.174892] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
May  9 16:20:05 msi kernel: [    0.174897] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
May  9 16:20:05 msi kernel: [    0.174900] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
May  9 16:20:05 msi kernel: [    0.174902] system 00:0a: iomem range 0x100000-0x7fffffff could not be reserved
May  9 16:20:05 msi kernel: [    0.179587] Switching to clocksource acpi_pm
May  9 16:20:05 msi kernel: [    0.179722] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
May  9 16:20:05 msi kernel: [    0.179724] pci 0000:00:01.0:   IO window: 0x6000-0x6fff
May  9 16:20:05 msi kernel: [    0.179728] pci 0000:00:01.0:   MEM window: 0xff200000-0xff2fffff
May  9 16:20:05 msi kernel: [    0.179731] pci 0000:00:01.0:   PREFETCH window: 0x000000cdf00000-0x000000ddefffff
May  9 16:20:05 msi kernel: [    0.179734] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
May  9 16:20:05 msi kernel: [    0.179737] pci 0000:00:06.0:   IO window: 0x7000-0x7fff
May  9 16:20:05 msi kernel: [    0.179740] pci 0000:00:06.0:   MEM window: 0xff300000-0xffafffff
May  9 16:20:05 msi kernel: [    0.179743] pci 0000:00:06.0:   PREFETCH window: 0x000000ddf00000-0x000000dfefffff
May  9 16:20:05 msi kernel: [    0.179747] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
May  9 16:20:05 msi kernel: [    0.179749] pci 0000:00:07.0:   IO window: 0x8000-0x8fff
May  9 16:20:05 msi kernel: [    0.179752] pci 0000:00:07.0:   MEM window: 0xffb00000-0xffbfffff
May  9 16:20:05 msi kernel: [    0.179755] pci 0000:00:07.0:   PREFETCH window: 0x00000078000000-0x000000781fffff
May  9 16:20:05 msi kernel: [    0.179759] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
May  9 16:20:05 msi kernel: [    0.179761] pci 0000:00:14.4:   IO window: disabled
May  9 16:20:05 msi kernel: [    0.179767] pci 0000:00:14.4:   MEM window: 0xffc00000-0xffcfffff
May  9 16:20:05 msi kernel: [    0.179772] pci 0000:00:14.4:   PREFETCH window: disabled
May  9 16:20:05 msi kernel: [    0.179873] NET: Registered protocol family 2
May  9 16:20:05 msi kernel: [    0.179991] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
May  9 16:20:05 msi kernel: [    0.179991] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
May  9 16:20:05 msi kernel: [    0.179991] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
May  9 16:20:05 msi kernel: [    0.179991] TCP: Hash tables configured (established 262144 bind 65536)
May  9 16:20:05 msi kernel: [    0.179991] TCP reno registered
May  9 16:20:05 msi kernel: [    0.179991] NET: Registered protocol family 1
May  9 16:20:05 msi kernel: [    0.179991] pci 0000:00:00.0: MSI quirk detected; MSI disabled
May  9 16:20:05 msi kernel: [    0.179991] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
May  9 16:20:05 msi kernel: [    0.240427] Scanning for low memory corruption every 60 seconds
May  9 16:20:05 msi kernel: [    0.240551] audit: initializing netlink socket (disabled)
May  9 16:20:05 msi kernel: [    0.240563] type=2000 audit(1273421987.240:1): initialized
May  9 16:20:05 msi kernel: [    0.249090] Trying to unpack rootfs image as initramfs...
May  9 16:20:05 msi kernel: [    0.260482] HugeTLB registered 2 MB page size, pre-allocated 0 pages
May  9 16:20:05 msi kernel: [    0.261819] VFS: Disk quotas dquot_6.5.2
May  9 16:20:05 msi kernel: [    0.261880] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
May  9 16:20:05 msi kernel: [    0.270403] fuse init (API version 7.13)
May  9 16:20:05 msi kernel: [    0.270526] msgmni has been set to 3745
May  9 16:20:05 msi kernel: [    0.270771] alg: No test for stdrng (krng)
May  9 16:20:05 msi kernel: [    0.270825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
May  9 16:20:05 msi kernel: [    0.270828] io scheduler noop registered
May  9 16:20:05 msi kernel: [    0.270829] io scheduler anticipatory registered
May  9 16:20:05 msi kernel: [    0.270831] io scheduler deadline registered
May  9 16:20:05 msi kernel: [    0.270869] io scheduler cfq registered (default)
May  9 16:20:05 msi kernel: [    0.280434] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May  9 16:20:05 msi kernel: [    0.280459] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
May  9 16:20:05 msi kernel: [    0.280625] ACPI: AC Adapter [ADP1] (off-line)
May  9 16:20:05 msi kernel: [    0.280701] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:13/PNP0C09:00/PNP0C0D:00/input/input0
May  9 16:20:05 msi kernel: [    0.287938] ACPI: Lid Switch [LID0]
May  9 16:20:05 msi kernel: [    0.287984] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:13/PNP0C09:00/PNP0C0E:00/input/input1
May  9 16:20:05 msi kernel: [    0.287986] ACPI: Sleep Button [SLPB]
May  9 16:20:05 msi kernel: [    0.288033] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
May  9 16:20:05 msi kernel: [    0.288036] ACPI: Power Button [PWRB]
May  9 16:20:05 msi kernel: [    0.288079] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
May  9 16:20:05 msi kernel: [    0.288081] ACPI: Power Button [PWRF]
May  9 16:20:05 msi kernel: [    0.288371] ACPI: duty_cycle spans bit 4
May  9 16:20:05 msi kernel: [    0.288414] processor LNXCPU:00: registered as cooling_device0
May  9 16:20:05 msi kernel: [    0.290429] thermal LNXTHERM:01: registered as thermal_zone0
May  9 16:20:05 msi kernel: [    0.290437] ACPI: Thermal Zone [THRM] (62 C)
May  9 16:20:05 msi kernel: [    0.291841] Linux agpgart interface v0.103
May  9 16:20:05 msi kernel: [    0.291877] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
May  9 16:20:05 msi kernel: [    0.293102] brd: module loaded
May  9 16:20:05 msi kernel: [    0.293568] loop: module loaded
May  9 16:20:05 msi kernel: [    0.293666] input: Macintosh mouse button emulation as /devices/virtual/input/input4
May  9 16:20:05 msi kernel: [    0.310189] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
May  9 16:20:05 msi kernel: [    0.310324] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
May  9 16:20:05 msi kernel: [    0.310720] Fixed MDIO Bus: probed
May  9 16:20:05 msi kernel: [    0.310752] PPP generic driver version 2.4.2
May  9 16:20:05 msi kernel: [    0.310808] tun: Universal TUN/TAP device driver, 1.6
May  9 16:20:05 msi kernel: [    0.310810] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
May  9 16:20:05 msi kernel: [    0.310902] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May  9 16:20:05 msi kernel: [    0.310948] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
May  9 16:20:05 msi kernel: [    0.310968] ehci_hcd 0000:00:13.2: EHCI Host Controller
May  9 16:20:05 msi kernel: [    0.311004] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
May  9 16:20:05 msi kernel: [    0.311069] ehci_hcd 0000:00:13.2: irq 19, io mem 0xffefc000
May  9 16:20:05 msi kernel: [    0.330095] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
May  9 16:20:05 msi kernel: [    0.330221] usb usb1: configuration #1 chosen from 1 choice
May  9 16:20:05 msi kernel: [    0.330256] hub 1-0:1.0: USB hub found
May  9 16:20:05 msi kernel: [    0.330265] hub 1-0:1.0: 8 ports detected
May  9 16:20:05 msi kernel: [    0.330374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May  9 16:20:05 msi kernel: [    0.341583] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
May  9 16:20:05 msi kernel: [    0.341605] ohci_hcd 0000:00:13.0: OHCI Host Controller
May  9 16:20:05 msi kernel: [    0.341650] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
May  9 16:20:05 msi kernel: [    0.341673] ohci_hcd 0000:00:13.0: irq 19, io mem 0xffefe000
May  9 16:20:05 msi kernel: [    0.404199] usb usb2: configuration #1 chosen from 1 choice
May  9 16:20:05 msi kernel: [    0.404231] hub 2-0:1.0: USB hub found
May  9 16:20:05 msi kernel: [    0.404245] hub 2-0:1.0: 4 ports detected
May  9 16:20:05 msi kernel: [    0.411626] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
May  9 16:20:05 msi kernel: [    0.411650] ohci_hcd 0000:00:13.1: OHCI Host Controller
May  9 16:20:05 msi kernel: [    0.411689] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
May  9 16:20:05 msi kernel: [    0.411712] ohci_hcd 0000:00:13.1: irq 19, io mem 0xffefd000
May  9 16:20:05 msi kernel: [    0.475054] usb usb3: configuration #1 chosen from 1 choice
May  9 16:20:05 msi kernel: [    0.475086] hub 3-0:1.0: USB hub found
May  9 16:20:05 msi kernel: [    0.475100] hub 3-0:1.0: 4 ports detected
May  9 16:20:05 msi kernel: [    0.475192] uhci_hcd: USB Universal Host Controller Interface driver
May  9 16:20:05 msi kernel: [    0.475273] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
May  9 16:20:05 msi kernel: [    0.475587] i8042.c: Detected active multiplexing controller, rev 1.1.
May  9 16:20:05 msi kernel: [    0.475674] serio: i8042 KBD port at 0x60,0x64 irq 1
May  9 16:20:05 msi kernel: [    0.475679] serio: i8042 AUX0 port at 0x60,0x64 irq 12
May  9 16:20:05 msi kernel: [    0.475682] serio: i8042 AUX1 port at 0x60,0x64 irq 12
May  9 16:20:05 msi kernel: [    0.475684] serio: i8042 AUX2 port at 0x60,0x64 irq 12
May  9 16:20:05 msi kernel: [    0.475687] serio: i8042 AUX3 port at 0x60,0x64 irq 12
May  9 16:20:05 msi kernel: [    0.475767] mice: PS/2 mouse device common for all mice
May  9 16:20:05 msi kernel: [    0.475916] rtc_cmos 00:02: RTC can wake from S4
May  9 16:20:05 msi kernel: [    0.475956] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
May  9 16:20:05 msi kernel: [    0.475983] rtc0: alarms up to one month, 114 bytes nvram
May  9 16:20:05 msi kernel: [    0.476111] device-mapper: uevent: version 1.0.3
May  9 16:20:05 msi kernel: [    0.478614] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
May  9 16:20:05 msi kernel: [    0.479436] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
May  9 16:20:05 msi kernel: [    0.482026] device-mapper: multipath: version 1.1.0 loaded
May  9 16:20:05 msi kernel: [    0.482030] device-mapper: multipath round-robin: version 1.0.0 loaded
May  9 16:20:05 msi kernel: [    0.483080] cpuidle: using governor ladder
May  9 16:20:05 msi kernel: [    0.483137] cpuidle: using governor menu
May  9 16:20:05 msi kernel: [    0.483491] TCP cubic registered
May  9 16:20:05 msi kernel: [    0.483632] NET: Registered protocol family 10
May  9 16:20:05 msi kernel: [    0.484115] lo: Disabled Privacy Extensions
May  9 16:20:05 msi kernel: [    0.484417] NET: Registered protocol family 17
May  9 16:20:05 msi kernel: [    0.484454] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-38 processors (1 cpu cores) (version 2.20.00)
May  9 16:20:05 msi kernel: [    0.520390] registered taskstats version 1
May  9 16:20:05 msi kernel: [    0.520762]   Magic number: 10:636:337
May  9 16:20:05 msi kernel: [    0.520786] tty tty58: hash matches
May  9 16:20:05 msi kernel: [    0.520798] thermal thermal_zone0: hash matches
May  9 16:20:05 msi kernel: [    0.520862] rtc_cmos 00:02: setting system clock to 2010-05-09 16:19:48 UTC (1273421988)
May  9 16:20:05 msi kernel: [    0.520865] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
May  9 16:20:05 msi kernel: [    0.520867] EDD information not available.
May  9 16:20:05 msi kernel: [    0.588056] Freeing initrd memory: 8129k freed
May  9 16:20:05 msi kernel: [    0.641959] Freeing unused kernel memory: 876k freed
May  9 16:20:05 msi kernel: [    0.642417] Write protecting the kernel read-only data: 7680k
May  9 16:20:05 msi kernel: [    0.701947] udev: starting version 151
May  9 16:20:05 msi kernel: [    0.951148] scsi0 : pata_atiixp
May  9 16:20:05 msi kernel: [    0.951387] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
May  9 16:20:05 msi kernel: [    0.951412] r8169 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
May  9 16:20:05 msi kernel: [    0.951482] r8169 0000:04:00.0: no MSI. Back to INTx.
May  9 16:20:05 msi kernel: [    0.952021] eth0: RTL8168b/8111b at 0xffffc9000035e000, 00:19:db:3b:75:57, XID 18000000 IRQ 19
May  9 16:20:05 msi kernel: [    0.953612] scsi1 : pata_atiixp
May  9 16:20:05 msi kernel: [    0.954877] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
May  9 16:20:05 msi kernel: [    0.954880] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
May  9 16:20:05 msi kernel: [    0.955348] scsi2 : sata_sil
May  9 16:20:05 msi kernel: [    0.955461] scsi3 : sata_sil
May  9 16:20:05 msi kernel: [    0.955721] ata3: SATA max UDMA/100 mmio m512@0xffeffc00 tf 0xffeffc80 irq 22
May  9 16:20:05 msi kernel: [    0.955725] ata4: SATA max UDMA/100 mmio m512@0xffeffc00 tf 0xffeffcc0 irq 22
May  9 16:20:05 msi kernel: [    0.955927] ACPI: Battery Slot [BAT1] (battery present)
May  9 16:20:05 msi kernel: [    1.130601] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WA03, max UDMA/33
May  9 16:20:05 msi kernel: [    1.170548] ata1.00: configured for UDMA/33
May  9 16:20:05 msi kernel: [    1.175970] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WA03 PQ: 0 ANSI: 5
May  9 16:20:05 msi kernel: [    1.187165] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
May  9 16:20:05 msi kernel: [    1.187169] Uniform CD-ROM driver Revision: 3.20
May  9 16:20:05 msi kernel: [    1.187485] sr 0:0:0:0: Attached scsi generic sg0 type 5
May  9 16:20:05 msi kernel: [    1.300069] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
May  9 16:20:05 msi kernel: [    1.320524] ata3.00: ATA-8: FUJITSU MHW2080BH, 0000001C, max UDMA/100
May  9 16:20:05 msi kernel: [    1.320526] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
May  9 16:20:05 msi kernel: [    1.370547] ata3.00: configured for UDMA/100
May  9 16:20:05 msi kernel: [    1.370630] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHW2080B 0000 PQ: 0 ANSI: 5
May  9 16:20:05 msi kernel: [    1.370755] sd 2:0:0:0: Attached scsi generic sg1 type 0
May  9 16:20:05 msi kernel: [    1.370947] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
May  9 16:20:05 msi kernel: [    1.370990] sd 2:0:0:0: [sda] Write Protect is off
May  9 16:20:05 msi kernel: [    1.371014] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May  9 16:20:05 msi kernel: [    1.371134]  sda: sda1 sda2 sda3 < sda5 sda6 >
May  9 16:20:05 msi kernel: [    1.444145] sd 2:0:0:0: [sda] Attached SCSI disk
May  9 16:20:05 msi kernel: [    1.720062] ata4: SATA link down (SStatus 0 SControl 310)
May  9 16:20:05 msi kernel: [    1.727366] ohci1394 0000:05:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
May  9 16:20:05 msi kernel: [    1.781095] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[ffcff000-ffcff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
May  9 16:20:05 msi kernel: [    2.119016] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
May  9 16:20:05 msi kernel: [    2.119022] EXT4-fs (sda5): write access will be enabled during recovery
May  9 16:20:05 msi kernel: [    3.413006] EXT4-fs (sda5): orphan cleanup on readonly fs
May  9 16:20:05 msi kernel: [    3.413123] EXT4-fs (sda5): 2 orphan inodes deleted
May  9 16:20:05 msi kernel: [    3.413125] EXT4-fs (sda5): recovery complete
May  9 16:20:05 msi kernel: [    3.858169] EXT4-fs (sda5): mounted filesystem with ordered data mode
May  9 16:20:05 msi kernel: [   16.671314] Adding 1522680k swap on /dev/sda6.  Priority:-1 extents:1 across:1522680k 
May  9 16:20:05 msi kernel: [   16.694017] udev: starting version 151
May  9 16:20:05 msi kernel: [   16.756409] lp: driver loaded but no devices found
May  9 16:20:05 msi kernel: [   16.852654] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
May  9 16:20:05 msi kernel: [   16.853195] acpi device:03: registered as cooling_device1
May  9 16:20:05 msi kernel: [   16.853546] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
May  9 16:20:05 msi kernel: [   16.853660] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
May  9 16:20:05 msi kernel: [   17.150601] type=1505 audit(1273414805.129:2):  operation="profile_load" pid=444 name="/sbin/dhclient3"
May  9 16:20:05 msi kernel: [   17.150859] type=1505 audit(1273414805.129:3):  operation="profile_load" pid=444 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
May  9 16:20:05 msi kernel: [   17.151003] type=1505 audit(1273414805.129:4):  operation="profile_load" pid=444 name="/usr/lib/connman/scripts/dhclient-script"
May  9 16:20:05 msi kernel: [   17.234515] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
May  9 16:20:05 msi kernel: [   17.246233] EDAC MC: Ver: 2.1.0 Apr 28 2010
May  9 16:20:05 msi kernel: [   17.250221] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
May  9 16:20:05 msi kernel: [   17.275211] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May  9 16:20:05 msi kernel: [   17.523216] msi-laptop: Identified laptop model 'MSI S271'.
May  9 16:20:05 msi kernel: [   17.523220] MSI: Brightness ignored, must be controlled by ACPI video driver
May  9 16:20:05 msi kernel: [   17.531017] msi-laptop: driver 0.5 successfully loaded.
May  9 16:20:05 msi kernel: [   17.553116] cfg80211: Calling CRDA to update world regulatory domain
May  9 16:20:05 msi kernel: [   17.586103] cfg80211: World regulatory domain updated:
May  9 16:20:05 msi kernel: [   17.586107] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May  9 16:20:05 msi kernel: [   17.586110] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May  9 16:20:05 msi kernel: [   17.586113] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
May  9 16:20:05 msi kernel: [   17.586115] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
May  9 16:20:05 msi kernel: [   17.586118] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May  9 16:20:05 msi kernel: [   17.586120] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May  9 16:20:05 msi kernel: [   17.607739] r8169: eth0: link down
May  9 16:20:05 msi kernel: [   17.608099] ADDRCONF(NETDEV_UP): eth0: link is not ready
May  9 16:20:05 msi kernel: [   17.637488] EDAC amd64_edac:  Ver: 3.2.0 Apr 28 2010
May  9 16:20:05 msi kernel: [   17.638029] [drm] Initialized drm 1.1.0 20060810
May  9 16:20:05 msi kernel: [   17.644578] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
May  9 16:20:05 msi kernel: [   17.644585] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
May  9 16:20:05 msi kernel: [   17.644586]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
May  9 16:20:05 msi kernel: [   17.644588]  (Note that use of the override may cause unknown side effects.)
May  9 16:20:05 msi kernel: [   17.644605] amd64_edac: probe of 0000:00:18.2 failed with error -22
May  9 16:20:05 msi kernel: [   17.671743] sdhci: Secure Digital Host Controller Interface driver
May  9 16:20:05 msi kernel: [   17.671748] sdhci: Copyright(c) Pierre Ossman
May  9 16:20:05 msi kernel: [   17.684275] elantech.c: assuming hardware version 1, firmware version 1.33
May  9 16:20:05 msi kernel: [   17.719798] elantech.c: Synaptics capabilities query result 0x02, 0x02, 0x64.
May  9 16:20:05 msi kernel: [   17.723686] sdhci-pci 0000:05:04.2: SDHCI controller found [1217:7120] (rev 1)
May  9 16:20:05 msi kernel: [   17.723710] sdhci-pci 0000:05:04.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
May  9 16:20:05 msi kernel: [   17.723969] Registered led device: mmc0::
May  9 16:20:05 msi kernel: [   17.724066] mmc0: SDHCI controller on PCI [0000:05:04.2] using PIO
May  9 16:20:05 msi kernel: [   17.779803] rt61pci 0000:05:09.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
May  9 16:20:05 msi kernel: [   17.822776] [drm] radeon defaulting to kernel modesetting.
May  9 16:20:05 msi kernel: [   17.822782] [drm] radeon kernel modesetting enabled.
May  9 16:20:05 msi kernel: [   17.824435] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
May  9 16:20:05 msi kernel: [   17.836990] [drm] radeon: Initializing kernel modesetting.
May  9 16:20:05 msi kernel: [   17.842224] [drm] register mmio base: 0xFF2F0000
May  9 16:20:05 msi kernel: [   17.842228] [drm] register mmio size: 65536
May  9 16:20:05 msi kernel: [   17.842932] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
May  9 16:20:05 msi kernel: [   17.842991] [drm] Generation 2 PCI interface, using max accessible memory
May  9 16:20:05 msi kernel: [   17.842994] [drm] radeon: VRAM 128M
May  9 16:20:05 msi kernel: [   17.842996] [drm] radeon: VRAM from 0x78000000 to 0x7FFFFFFF
May  9 16:20:05 msi kernel: [   17.842997] [drm] radeon: GTT 32M
May  9 16:20:05 msi kernel: [   17.842999] [drm] radeon: GTT from 0x80000000 to 0x81FFFFFF
May  9 16:20:05 msi kernel: [   17.843035] [drm] radeon: irq initialized.
May  9 16:20:05 msi kernel: [   17.843153] [drm] Detected VRAM RAM=128M, BAR=128M
May  9 16:20:05 msi kernel: [   17.843158] [drm] RAM width 128bits DDR
May  9 16:20:05 msi kernel: [   17.846579] [TTM] Zone  kernel: Available graphics memory: 963412 kiB.
May  9 16:20:05 msi kernel: [   17.846604] [drm] radeon: 128M of VRAM memory ready
May  9 16:20:05 msi kernel: [   17.846607] [drm] radeon: 32M of GTT memory ready.
May  9 16:20:05 msi kernel: [   17.846634] [drm] GART: num cpu pages 8192, num gpu pages 8192
May  9 16:20:05 msi kernel: [   17.847000] [drm] radeon: 2 quad pipes, 1 z pipes initialized.
May  9 16:20:05 msi kernel: [   17.847013] [drm] radeon: cp idle (0x10000C03)
May  9 16:20:05 msi kernel: [   17.847120] [drm] Loading R300 Microcode
May  9 16:20:05 msi kernel: [   17.847658] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
May  9 16:20:05 msi kernel: [   17.859094] [drm] radeon: ring at 0x0000000080000000
May  9 16:20:05 msi kernel: [   17.859113] [drm] ring test succeeded in 1 usecs
May  9 16:20:05 msi kernel: [   17.859246] [drm] radeon: ib pool ready.
May  9 16:20:05 msi kernel: [   17.859314] [drm] ib test succeeded in 0 usecs
May  9 16:20:05 msi kernel: [   17.859419] [drm] Panel ID String: SEC                     
May  9 16:20:05 msi kernel: [   17.859421] [drm] Panel Size 1280x800
May  9 16:20:05 msi kernel: [   17.859467] [drm] Radeon Display Connectors
May  9 16:20:05 msi kernel: [   17.859469] [drm] Connector 0:
May  9 16:20:05 msi kernel: [   17.859470] [drm]   VGA
May  9 16:20:05 msi kernel: [   17.859473] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
May  9 16:20:05 msi kernel: [   17.859474] [drm]   Encoders:
May  9 16:20:05 msi kernel: [   17.859476] [drm]     CRT1: INTERNAL_DAC2
May  9 16:20:05 msi kernel: [   17.859477] [drm] Connector 1:
May  9 16:20:05 msi kernel: [   17.859479] [drm]   LVDS
May  9 16:20:05 msi kernel: [   17.859481] [drm]   DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
May  9 16:20:05 msi kernel: [   17.859483] [drm]   Encoders:
May  9 16:20:05 msi kernel: [   17.859484] [drm]     LCD1: INTERNAL_LVDS
May  9 16:20:05 msi kernel: [   17.885326] Registered led device: rt61pci-phy0::radio
May  9 16:20:05 msi kernel: [   17.885344] Registered led device: rt61pci-phy0::assoc
May  9 16:20:05 msi kernel: [   17.908094] rt61pci 0000:05:09.0: firmware: requesting rt2561.bin
May  9 16:20:05 msi kernel: [   17.958877] type=1505 audit(1273414805.929:5):  operation="profile_load" pid=767 name="/usr/share/gdm/guest-session/Xsession"
May  9 16:20:05 msi kernel: [   17.964016] type=1505 audit(1273414805.939:6):  operation="profile_replace" pid=769 name="/sbin/dhclient3"
May  9 16:20:05 msi kernel: [   17.964290] type=1505 audit(1273414805.939:7):  operation="profile_replace" pid=769 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
May  9 16:20:05 msi kernel: [   17.964447] type=1505 audit(1273414805.939:8):  operation="profile_replace" pid=769 name="/usr/lib/connman/scripts/dhclient-script"
May  9 16:20:05 msi kernel: [   17.967801] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input7
May  9 16:20:05 msi kernel: [   17.984774] type=1505 audit(1273414805.959:9):  operation="profile_load" pid=771 name="/usr/bin/evince"
May  9 16:20:05 msi kernel: [   17.988101] type=1505 audit(1273414805.959:10):  operation="profile_load" pid=771 name="/usr/bin/evince-previewer"
May  9 16:20:05 msi kernel: [   18.000510] ADDRCONF(NETDEV_UP): wlan0: link is not ready
May  9 16:20:06 msi kernel: [   18.023296] type=1505 audit(1273414805.999:11):  operation="profile_load" pid=771 name="/usr/bin/evince-thumbnailer"
May  9 16:20:06 msi kernel: [   18.073236] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
May  9 16:20:06 msi kernel: [   18.176308] [drm] fb mappable at 0xD0040000
May  9 16:20:06 msi kernel: [   18.176312] [drm] vram apper at 0xD0000000
May  9 16:20:06 msi kernel: [   18.176314] [drm] size 4096000
May  9 16:20:06 msi kernel: [   18.176315] [drm] fb depth is 24
May  9 16:20:06 msi kernel: [   18.176316] [drm]    pitch is 5120
May  9 16:20:06 msi kernel: [   18.185251] fb0: radeondrmfb frame buffer device
May  9 16:20:06 msi kernel: [   18.185254] registered panic notifier
May  9 16:20:06 msi kernel: [   18.185261] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
May  9 16:20:06 msi kernel: [   18.187173] vga16fb: mapped to 0xffff8800000a0000
May  9 16:20:06 msi kernel: [   18.187179] vga16fb: not registering due to another framebuffer present
May  9 16:20:06 msi kernel: [   18.278616] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
May  9 16:20:06 msi kernel: [   18.321511] Console: switching to colour frame buffer device 160x50
May  9 16:20:06 msi kernel: [   18.715228] ppdev: user-space parallel port driver
May  9 16:20:21 msi kernel: [   33.955314] r8169: eth0: link up
May  9 16:20:21 msi kernel: [   33.955680] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
May  9 16:20:33 msi kernel: [   45.398819] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
May  9 16:20:33 msi kernel: [   45.501334] Intel AES-NI instructions are not detected.
May  9 16:20:33 msi kernel: [   45.524676] padlock: VIA PadLock not detected.
May  9 16:22:00 msi kernel: [  132.672134] r8169: eth0: link down
May  9 16:25:19 msi rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="431" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'.

pour le reste je teste et je poste apres car si ca bug !!!
ah au fait ca n'a peut etre rien a voir mais j'ai lu sur le form a propos de l'acpi=off qu'apres on n'avais plus de gestion batterie etc bein ce qui est bizare c'est que moi l'acpi est active et pourtant je n'ai aucune info que ce soit la batterie du portable la sourie sans fil c zarbe non?
et au passage j'ai esaye de passer en acpi=off mais impossible si vous avez la manip detaile je prend!

Hors ligne

#58 Le 09/05/2010, à 20:58

mlauco

Re : connection filaire qui s'arrete et plantage systeme

bon j'ai essaye mii tool mais apparement je doit mal m'y prendre

mlauco@msi:~$ mii-tool
SIOCGMIIPHY on 'eth0' failed: Operation not permitted
SIOCGMIIPHY on 'eth1' failed: Operation not permitted
SIOCGMIIPHY on 'eth2' failed: Operation not permitted
SIOCGMIIPHY on 'eth3' failed: Operation not permitted
SIOCGMIIPHY on 'eth4' failed: Operation not permitted
SIOCGMIIPHY on 'eth5' failed: Operation not permitted
SIOCGMIIPHY on 'eth6' failed: Operation not permitted
SIOCGMIIPHY on 'eth7' failed: Operation not permitted
no MII interfaces found
mlauco@msi:~$ mii-tool
SIOCGMIIPHY on 'eth0' failed: Operation not permitted
SIOCGMIIPHY on 'eth1' failed: Operation not permitted
SIOCGMIIPHY on 'eth2' failed: Operation not permitted
SIOCGMIIPHY on 'eth3' failed: Operation not permitted
SIOCGMIIPHY on 'eth4' failed: Operation not permitted
SIOCGMIIPHY on 'eth5' failed: Operation not permitted
SIOCGMIIPHY on 'eth6' failed: Operation not permitted
SIOCGMIIPHY on 'eth7' failed: Operation not permitted
no MII interfaces found
mlauco@msi:~$ mii-tool -F media, --force=media
Invalid media specification 'media'.
Invalid media specification 'media'.
mlauco@msi:~$               Disable autonegotiation, and force the MII to either  100baseTx-
Disable: command not found
mlauco@msi:~$               FD, 100baseTx-HD, 10baseT-FD, or 10baseT-HD operation.

Hors ligne

#59 Le 09/05/2010, à 21:06

mlauco

Re : connection filaire qui s'arrete et plantage systeme

et au fait spad35 tu ne m'a pas dit pour les cds de reinstal tu peux m'en faire une copie stp je te fais un virement pour les frais et tu me l'envoies si tu es ok bien sur
c'est au cas ou je ne pourrais pas resoudre le probleme alors je le revends car tourne sous windaube de temps en temps je dit pas mais tout le temps la y a pas moyen plutot je m'achete un ordimini pour jouer a tetris.

Hors ligne

#60 Le 09/05/2010, à 21:22

PPdM

Re : connection filaire qui s'arrete et plantage systeme

salut
essayes cela

ethtool -s eth0 speed 100 duplex full

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#61 Le 09/05/2010, à 22:00

mlauco

Re : connection filaire qui s'arrete et plantage systeme

bon la je desespere j'ai passer le WE sur ce probleme et tjs rien j'en ai marre je vais me coucher je me leve a 4H00 demain pour le tafje reprendrais les hostilitees demain
ethtool n'a rien done je me connecte ca marche 30 seconde puis ordi plante et de nouveau extinction brutal
merci a vous et a demain pour de nouvelle aventure

Dernière modification par mlauco (Le 09/05/2010, à 22:08)

Hors ligne

#62 Le 10/05/2010, à 12:13

spad35

Re : connection filaire qui s'arrete et plantage systeme

@ mlauco

J'ai trouvé du nouveau qui expliquerait pourquoi je n'ai pas de problèmes et toi oui
        regarde le titre

  Realtek 8111/8168 Onboard LAN Problem with 10.04 and Windows 7 dual boot

Re: Realtek 8111/8168 Onboard LAN Problem with 10.04 and Windows 7 dual boot
Quote:
Originally Posted by dino99 View Post
hello guys,

some confusions there: windows work on its own partition and cant interfere with an other Os on an other partition
Yes it can. Yes it absolutely can. This is not a software interaction. When Windows shuts down it leaves the hardware in a state that is difficult for certain Ubuntu drivers to deal with. That's why completely removing the system power works. It resets the state of the hardware. A restart from Windows to Ubuntu does cause a problem because power is never removed from the hardware.

That's the difference between a restart, and a full power down.




Quote:
Originally Posted by dino99 View Post
the "wake on lan" thing is a setting into your bios, so turn it off.
That was my first idea. I tried absolutely every BIOS setting I could get my hands on before even searching the forums for this. It was not a BIOS issue in my case.

My issue was that Ubuntu needed a different driver in order to straighten out what Windows does to my LAN hardware when it shuts down. The script I linked to above solved it perfectly.
Balok is offline       Reply With Quote
Balok
View Public Profile
Send a private message to Balok
Find More Posts by Balok
Old 6 Days Ago       #12
yingwuzhao
5 Cups of Ubuntu

Join Date: Jan 2008
Beans: 30
   
t

et le dernier message :

Re: Realtek 8111/8168 Onboard LAN Problem with 10.04 and Windows 7 dual boot
Now the problem has two aspects, one is in windows and the other is in linux.

For windows you want to roll back the network driver to the microsoft one, instead of using the one provided by Realtek, then turn on the feature "wake on lan" in device manage -> network card -> power management.

For linux, you want to install the tool "ethtool" and in the console do:
sudo ethtool -s eth0 wol g

to also turn on the feature "wake on lan". Then the problem should be solved. If it still doesn't work, then under linux do the following:
sudo ethtool -s eth0 wol d
then do again:
sudo ethtool -s eth0 wol g

Bes

Essaye en premier la solution pour linux:P

Pour ta batterie il faut "blacklister" le module msi-laptop

edit: https://bugs.launchpad.net/ubuntu/+sour … bug/218094

rajouter msi-laptop
   dans
/etc/modprobe.d/blacklist.conf

[effacé le passage sur rt61] :on a pas la meme carte, moi j'ai une ralink rt2500

J'ai aussi repéré ça dans tes logs:

 HPET not enabled in BIOS. You might try hpet=force boot option

pour ça tu dois éditer le fichier '/etc/default/grub

gksu gedit /etc/default/grub

Il faut ensuite ajouter l'argument 'hpet=force' après 'GRUB_CMDLINE_LINUX_DEFAULT=', par exemple :

GRUB_CMDLINE_LINUX_DEFAULT="(...) hpet=force"

Appliquer les changements avec la commande update-grub, en root:

sudo update-grub

Pour le cd de réinstall désolé je l'ai jeté mais ne regrette rien car d'après le manuel il s'agit de (je cite) : le logiciel "tout en un" de DVD contient des drivers, utilitaires, et une fonction de restauration optionnelle
et de toute façon c'était xp

Dernière modification par spad35 (Le 10/05/2010, à 17:17)

Hors ligne

#63 Le 10/05/2010, à 20:21

mlauco

Re : connection filaire qui s'arrete et plantage systeme

salut spad35 c'est pas grave pour les cds mais c'est bizare parceue moi d'origine il etait fourni avec vista encore plus bizare en voulant reinstaller vista ou xp l'instalation plante surement a cause des drivers satas enfin bref

j'ai essaye tes lignes de commande alors deja en mode console j'ai taper rot il m'a que root n'etait pas installer ???? il me propose de l'installer sudo aptget root manager etc... je me dit que ca doit pas etre le bon mais enfin bon je l'ai installe et ca marche pas .
j'essaye directement ta ligne de code dans une console il me demande le mot de passe et revient a l'invite de commande je sais meme pas si ca a fait quelque chose .
j'essaye de me connecter en filaire et ca ne marche plus du tout il n'essaye meme pas de  se connecte

j'aimerais bien essayer de mettre l'acpi sur off mais dite moi comment faire pas a pas car la derniere fois il ne m'autorisait pas a modifier le fichier grub
voila merci d'avance

Hors ligne

#64 Le 10/05/2010, à 22:08

PPdM

Re : connection filaire qui s'arrete et plantage systeme

Pourquoi veux tu passer ne root
pour les commande qui demandent root tu précèdes  la commande avec sudo c'est tout.

sudo apt-get update

par exemple

Dernière modification par pierguiard (Le 10/05/2010, à 22:08)

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#65 Le 11/05/2010, à 16:52

spad35

Re : connection filaire qui s'arrete et plantage systeme

@ mlauco

Ne parts pas dans 36 directions, tu parles d'installer vista puis xp, que ça plante etc...etc...
Là c'est nous qui sommes perdus.

Bon pour le moment qu'as tu en dual boot avec ubuntu ? J'ai cru comprendre que c'est seven non ? Et bien il se pourrait justement que c'est seven qui fout le bordel
(De plus j'ai le même ordi que toi, je n'ai pas seven et ma carte fonctionne parfaitement)

Onboard LAN Problem with 10.04 and Windows 7 dual boot >http://ubuntuforums.org/showthread.php?t=1465703&page=2

balok (le gars du forum) dit : A restart from Windows to Ubuntu does cause a problem because power is never removed from the hardware.

En fait windows il s'en fout des procédures, il est tout seul,c'est le roi. Il ne pense pas "linux" qui stoppe un par un ses dæmons et ses services pour faire place à un autre système (plus sérieusement il semble que win laisse la carte en "stand-by" pour le wake-on-lan)

alors ou tu réinstalle ubuntu sur tout le disque en écrasant ouin-ouin  -mais si ce n'est pas le problème ça sert à rien-  ou tu tente la solution du forum ubuntu anglais (comme l'explique le membre yingwuzhao post #12). Et tu as déjà ethtool d'installé sur les conseils de pierguiard

en gros dans seven il faut basculer sur le driver windows plutôt que celui fourni par realtek
(comment ? je sais pas...)
puis 

device manage -> network card -> power management et mettre sur "on"

éteindre completement
dans ubuntu : ouvrir un terminal

sudo ethtool -s eth0 wol g

et si ça marche toujours pas :

sudo ethtool -s eth0 wol d
then do again:
sudo ethtool -s eth0 wol g

wol p|u|m|b|a|g|s|d...
              Sets Wake-on-LAN options.  Not all devices  support  this.   The
              argument  to  this  option  is a string of characters specifying
              which options to enable.
              p  Wake on phy activity
              u  Wake on unicast messages
              m  Wake on multicast messages
              b  Wake on broadcast messages
              a  Wake on ARP
              g  Wake on MagicPacket(tm)
              s  Enable SecureOn(tm) password for MagicPacket(tm)
              d  Disable (wake on nothing).  This option clears  all  previous
                 options.

Je serais toi j'en profiterais pour désinstaller root manager et peut être d'autres trucs que tu aurais pu installer par erreur
Pour pas te prendre la tête tu peux lancer synaptic >fichier >historique

j'ai essaye tes lignes de commande alors deja en mode console j'ai taper rot il m'a que root n'etait pas installer ???? il me propose de l'installer sudo aptget root manager etc... je me dit que ca doit pas etre le bon mais enfin bon je l'ai installe et ca marche pas .
j'essaye directement ta ligne de code dans une console il me demande le mot de passe et revient a l'invite de commande je sais meme pas si ca a fait quelque chose .
j'essaye de me connecter en filaire et ca ne marche plus du tout il n'essaye meme pas de  se connecte

j'aimerais bien essayer de mettre l'acpi sur off mais dite moi comment faire pas a pas car la derniere fois il ne m'autorisait pas a modifier le fichier grub

Pour l'acpi sur off dans ton cas c'est plutôt un problème avec hpet. Je te croyais plus familiarisé avec les outils ubuntu alors je vais reprendre pas à pas :
pour modifier ton grub :

tu fais <Alt><F2> ou lancer une commande (pas dans une console!)

puis tu tape (ou tu colle) :

gksu gedit /etc/default/grub

la normalement tu dois taper ton mot de passe et ça t'ouvre gedit (le bloc-note si tu veux) en mode root

ensuite tu repere lla ligne :

GRUB_CMDLINE_LINUX_DEFAULT=""
il se peut qu'il y ait:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"

tu ajoute hpet=force

GRUB_CMDLINE_LINUX_DEFAULT="hpet=force"
      ou
GRUB_CMDLINE_LINUX_DEFAULT=""quiet splash hpet=force"

Bien penser a enregistrer !

Puis tu ouvre un terminal et tu colle pour prendre en compte les changements :

sudo update-grub

Voila et pour tes problèmes de batterie tu fait la même manip que pour grub avec

/etc/modprobe.d/blacklist.conf

et tout en bas tu rajoute :

blacklist msi_laptop

chez moi ça donne ça a la fin du fichier :

# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr

# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac

#wrong information on msi laptop
blacklist msi_laptop

A+

Hors ligne

Pages : 1 2 3