#26 Le 20/06/2010, à 10:42
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Sur ce post ils ont le meme soucis apparement, probleme wifi apres mise a jour, (un update noyau qui est le meme que le tiens)
http://forum.ubuntu-fr.org/viewtopic.php?id=403630
La solution est de démarrer ubuntu sur ton noyau précédent en passant par grub
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#27 Le 21/06/2010, à 10:57
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Marmounette a écrit :
Coeur Noir a écrit :Ok j'ai modifié le fichier comme tu me le suggères.
Quand tu dis "sans manager" tu veux dire quoi au juste ?
Quand tu modifies le fichier interfaces ca force les connexions sans Network Manaer ni Wicd ce qui élimine des problemes possibles du au manager network.
tu les désactives et tu laisses la main au fichier interfaces, au redémarrage tu auras une connexion directe et refais les tests pour voir si ca change quelque chose, je persiste a croire que c'est tout de meme un soucis de mise a jour, je vais voir deux trois trucs encore
Euh... bah non, quand je redémarre, je n'ai plus aucune connexion...
Tenterai en démarrant sur l'autre noyau...
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#28 Le 21/06/2010, à 11:01
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Bon c'est pas Network Manager XD
avc la commande dmesg tu peux toujours avoir les résultats d'erreurs, lorsqu'un truc ne marche pas, tape dmesg et lis ce qu'il dit, si tu vois ta carte wifi ou ton driver apparaitre, ca peut aider.
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#29 Le 22/06/2010, à 07:59
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Démarrage sur l'un ou l'autre noyau, zéro connexion ! Ni wifi, ni filaire (car absence de network-manager).
J'ai réédité le fichier etc/network/interfaces. Maintenant je fais comment pour me connecter - au moins en filaire ?
(sur le noyau .21 problème de drivers nvidia ???)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#30 Le 22/06/2010, à 08:12
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
mais tu as écrit quoi dans le fichier interface parce que si tu as écrit correctement
auto eth0
iface eth0 inet dhcp
eth0 étant ton filiaire, il y aura une connection et si tu ne me donnes pas la sortie de ton fichier cat /etc/network/interfaces je ne peux pas deviner ce qui ne va pas !!!
Que ce soit sur l'un ou l'autres des noyaux ton fichier est le meme, s'il est faux c'est normal que tu aies zero connexion -_-
Donc donne moi la sortie de la commande lshw -C Network, que je puisse vérifié les noms des connexions et la sortie cat /etc/network/interfaces. Sinon je ne peux pas t'aider moi !
Et je t'ai demandé la sortie de dmesg aussi...
Si maintenant tu préfères resté avec ton soucis de wifi, remet Network Manager, il se trouve sur le CD d'installation en passant par synaptic et remet le fichier interfaces comme avant. Parce que moi me prendre des messages pas très sympathique alors que j'essaye d'aider je peux franchement m'en passer !
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#31 Le 22/06/2010, à 08:34
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Parce que moi me prendre des messages pas très sympathique alors que j'essaye d'aider je peux franchement m'en passer !
Euh bah désolé y avait aucune mauvaise intention !
Donc vu que je dois rebooter de l'un à l'autre OS pour suivre tes différentes suggestions, les réponses vont être un peu espacées.
dmesg me renvoie :
[ 0.021245] Initializing cgroup subsys ns
[ 0.021249] Initializing cgroup subsys cpuacct
[ 0.021253] Initializing cgroup subsys memory
[ 0.021263] Initializing cgroup subsys devices
[ 0.021265] Initializing cgroup subsys freezer
[ 0.021267] Initializing cgroup subsys net_cls
[ 0.021287] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.021289] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.021292] CPU 0/0x0 -> Node 0
[ 0.021294] tseg: 003ff00000
[ 0.021297] mce: CPU supports 5 MCE banks
[ 0.021308] Performance Events: AMD PMU driver.
[ 0.021313] ... version: 0
[ 0.021314] ... bit width: 48
[ 0.021316] ... generic registers: 4
[ 0.021317] ... value mask: 0000ffffffffffff
[ 0.021319] ... max period: 00007fffffffffff
[ 0.021321] ... fixed-purpose events: 0
[ 0.021323] ... event mask: 000000000000000f
[ 0.021334] SMP alternatives: switching to UP code
[ 0.033588] Freeing SMP alternatives: 40k freed
[ 0.033614] ACPI: Core revision 20090903
[ 0.040021] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040032] ftrace: allocating 22518 entries in 89 pages
[ 0.045161] Setting APIC routing to flat
[ 0.045371] alloc irq_desc for 21 on node 0
[ 0.045373] alloc kstat_irqs on node 0
[ 0.045514] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.149228] CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01
[ 0.150000] Brought up 1 CPUs
[ 0.150000] Total of 1 processors activated (4377.75 BogoMIPS).
[ 0.150000] CPU0 attaching NULL sched-domain.
[ 0.150000] devtmpfs: initialized
[ 0.150000] regulator: core version 0.5
[ 0.150000] Time: 8:11:44 Date: 06/22/10
[ 0.150000] NET: Registered protocol family 16
[ 0.150000] node 0 link 0: io port [d000, ffff]
[ 0.150000] TOM: 0000000040000000 aka 1024M
[ 0.150000] node 0 link 0: mmio [a0000, bffff]
[ 0.150000] node 0 link 0: mmio [40000000, fe02ffff]
[ 0.150000] node 0 link 0: mmio [e0000000, e02fffff]
[ 0.150000] bus: [00,02] on node 0 link 0
[ 0.150000] bus: 00 index 0 io port: [0, ffff]
[ 0.150000] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.150000] bus: 00 index 2 mmio: [40000000, fcffffffff]
[ 0.150000] ACPI: bus type pci registered
[ 0.150000] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 0
[ 0.150000] PCI: MCFG area at e0000000 reserved in E820
[ 0.150000] PCI: Using MMCONFIG at e0000000 - e00fffff
[ 0.150000] PCI: Using configuration type 1 for base access
[ 0.150000] bio: create slab <bio-0> at 0
[ 0.150000] ACPI: EC: Look up EC in DSDT
[ 0.150000] ACPI Warning: Package List length (0x6) larger than NumElements count (0x4), truncated
[ 0.150000] (20090903/dsobject-515)
[ 0.150000] ACPI: Interpreter enabled
[ 0.150000] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.150000] ACPI: Using IOAPIC for interrupt routing
[ 0.150000] ACPI: No dock devices found.
[ 0.150000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.150000] pci 0000:00:00.0: reg 18 io port: [0x4100-0x411f]
[ 0.150000] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.150000] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.150000] pci 0000:00:02.0: PME# disabled
[ 0.150000] pci 0000:00:11.0: reg 10 io port: [0xfe00-0xfe07]
[ 0.150000] pci 0000:00:11.0: reg 14 io port: [0xfd00-0xfd03]
[ 0.150000] pci 0000:00:11.0: reg 18 io port: [0xfc00-0xfc07]
[ 0.150000] pci 0000:00:11.0: reg 1c io port: [0xfb00-0xfb03]
[ 0.150000] pci 0000:00:11.0: reg 20 io port: [0xfa00-0xfa0f]
[ 0.150000] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
[ 0.150000] pci 0000:00:11.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.150000] pci 0000:00:11.0: supports D1 D2
[ 0.150000] pci 0000:00:12.0: reg 10 io port: [0xf900-0xf907]
[ 0.150000] pci 0000:00:12.0: reg 14 io port: [0xf800-0xf803]
[ 0.150000] pci 0000:00:12.0: reg 18 io port: [0xf700-0xf707]
[ 0.150000] pci 0000:00:12.0: reg 1c io port: [0xf600-0xf603]
[ 0.150000] pci 0000:00:12.0: reg 20 io port: [0xf500-0xf50f]
[ 0.150000] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02e000-0xfe02e1ff]
[ 0.150000] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.150000] pci 0000:00:12.0: supports D1 D2
[ 0.150000] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.150000] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.150000] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.150000] pci 0000:00:13.2: supports D1 D2
[ 0.150000] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.150000] pci 0000:00:13.2: PME# disabled
[ 0.150000] pci 0000:00:14.0: reg 10 io port: [0x400-0x40f]
[ 0.150000] pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02a000-0xfe02a3ff]
[ 0.150000] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.150000] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.150000] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.150000] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.150000] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.150000] pci 0000:00:14.1: reg 20 io port: [0xf300-0xf30f]
[ 0.150000] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.150000] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.150000] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.150000] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
[ 0.150000] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.150059] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[ 0.150062] pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
[ 0.150066] pci 0000:00:02.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.150125] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff]
[ 0.150136] pci 0000:02:01.0: reg 14 io port: [0xdf00-0xdf07]
[ 0.150146] pci 0000:02:01.0: reg 18 io port: [0xde00-0xdeff]
[ 0.150212] pci 0000:02:01.0: supports D2
[ 0.150214] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
[ 0.150220] pci 0000:02:01.0: PME# disabled
[ 0.150280] pci 0000:02:03.0: reg 10 io port: [0xdd00-0xddff]
[ 0.150291] pci 0000:02:03.0: reg 14 32bit mmio: [0xfdefe000-0xfdefe0ff]
[ 0.150363] pci 0000:02:03.0: supports D1 D2
[ 0.150365] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.150371] pci 0000:02:03.0: PME# disabled
[ 0.150432] pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefd000-0xfdefd7ff]
[ 0.150442] pci 0000:02:04.0: reg 14 io port: [0xdc00-0xdc7f]
[ 0.150517] pci 0000:02:04.0: supports D2
[ 0.150519] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.150525] pci 0000:02:04.0: PME# disabled
[ 0.150594] pci 0000:00:14.4: transparent bridge
[ 0.150603] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[ 0.150608] pci 0000:00:14.4: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.150614] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.150629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.150771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.163861] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.163940] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.164018] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.164095] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.164173] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
[ 0.164250] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11)
[ 0.164327] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *10 11)
[ 0.164404] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11)
[ 0.164493] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.164496] vgaarb: loaded
[ 0.164591] SCSI subsystem initialized
[ 0.164636] libata version 3.00 loaded.
[ 0.164697] usbcore: registered new interface driver usbfs
[ 0.164708] usbcore: registered new interface driver hub
[ 0.164730] usbcore: registered new device driver usb
[ 0.164832] ACPI: WMI: Mapper loaded
[ 0.164834] PCI: Using ACPI for IRQ routing
[ 0.164842] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.164845] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.164988] NetLabel: Initializing
[ 0.164990] NetLabel: domain hash size = 128
[ 0.164991] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.165004] NetLabel: unlabeled traffic allowed by default
[ 0.165028] Switching to clocksource tsc
[ 0.166582] AppArmor: AppArmor Filesystem Enabled
[ 0.166597] pnp: PnP ACPI init
[ 0.166612] ACPI: bus type pnp registered
[ 0.167005] pnp 00:01: io resource (0x40b-0x40b) overlaps 0000:00:14.0 BAR 0 (0x400-0x40f), disabling
[ 0.168568] pnp 00:0a: mem resource (0xd0000-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168571] pnp 00:0a: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168575] pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168578] pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168582] pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168585] pnp 00:0a: mem resource (0x100000-0x3feeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168630] pnp: PnP ACPI: found 11 devices
[ 0.168631] ACPI: ACPI bus type pnp unregistered
[ 0.168641] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.168644] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.168647] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.168653] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.168655] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.168658] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.168660] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.168663] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.168666] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.168669] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.168680] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.168682] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.168688] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.168696] system 00:0a: iomem range 0x3ff00000-0x3fffffff could not be reserved
[ 0.168699] system 00:0a: iomem range 0x3fef0000-0x3fefffff could not be reserved
[ 0.168702] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.168705] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.168708] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.168711] system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.169987] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.169987] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.169987] pci 0000:00:02.0: MEM window: 0xfa000000-0xfcffffff
[ 0.169987] pci 0000:00:02.0: PREFETCH window: 0xd0000000-0xdfffffff
[ 0.169987] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.169987] pci 0000:00:14.4: IO window: 0xd000-0xdfff
[ 0.169987] pci 0000:00:14.4: MEM window: 0xfde00000-0xfdefffff
[ 0.169987] pci 0000:00:14.4: PREFETCH window: 0xfdd00000-0xfddfffff
[ 0.169987] pci 0000:00:02.0: setting latency timer to 64
[ 0.169987] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.169987] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.169987] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.169987] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff]
[ 0.169987] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.169987] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.169987] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.169987] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.169987] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.169987] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.169987] NET: Registered protocol family 2
[ 0.169987] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.169987] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.170307] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.170907] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.170910] TCP reno registered
[ 0.170999] NET: Registered protocol family 1
[ 0.171018] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.224975] pci 0000:01:00.0: Boot video device
[ 0.225334] Scanning for low memory corruption every 60 seconds
[ 0.225453] audit: initializing netlink socket (disabled)
[ 0.225463] type=2000 audit(1277194304.224:1): initialized
[ 0.233960] Trying to unpack rootfs image as initramfs...
[ 0.245130] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.246404] VFS: Disk quotas dquot_6.5.2
[ 0.246453] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.255103] fuse init (API version 7.13)
[ 0.255212] msgmni has been set to 1979
[ 0.255439] alg: No test for stdrng (krng)
[ 0.255490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.255493] io scheduler noop registered
[ 0.255495] io scheduler anticipatory registered
[ 0.255497] io scheduler deadline registered
[ 0.255528] io scheduler cfq registered (default)
[ 0.255674] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.255693] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.255770] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.255774] ACPI: Power Button [PWRB]
[ 0.255822] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.255824] ACPI: Power Button [PWRF]
[ 0.256032] processor LNXCPU:00: registered as cooling_device0
[ 0.258557] Linux agpgart interface v0.103
[ 0.258591] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.259641] brd: module loaded
[ 0.260047] loop: module loaded
[ 0.260124] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.265103] alloc irq_desc for 23 on node 0
[ 0.265106] alloc kstat_irqs on node 0
[ 0.265115] pata_acpi 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.265234] alloc irq_desc for 22 on node 0
[ 0.265235] alloc kstat_irqs on node 0
[ 0.265239] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.265305] alloc irq_desc for 16 on node 0
[ 0.265307] alloc kstat_irqs on node 0
[ 0.265311] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.275346] Fixed MDIO Bus: probed
[ 0.275381] PPP generic driver version 2.4.2
[ 0.275433] tun: Universal TUN/TAP device driver, 1.6
[ 0.275435] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.275522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.275569] alloc irq_desc for 19 on node 0
[ 0.275572] alloc kstat_irqs on node 0
[ 0.275579] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.275598] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.275637] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.275706] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
[ 0.295104] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.295244] usb usb1: configuration #1 chosen from 1 choice
[ 0.295276] hub 1-0:1.0: USB hub found
[ 0.295286] hub 1-0:1.0: 8 ports detected
[ 0.295390] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.305065] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.305090] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.305162] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.305185] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
[ 0.369344] usb usb2: configuration #1 chosen from 1 choice
[ 0.369378] hub 2-0:1.0: USB hub found
[ 0.369391] hub 2-0:1.0: 4 ports detected
[ 0.375072] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.375096] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.375172] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.375195] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
[ 0.439079] usb usb3: configuration #1 chosen from 1 choice
[ 0.439113] hub 3-0:1.0: USB hub found
[ 0.439127] hub 3-0:1.0: 4 ports detected
[ 0.439210] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.439287] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.439290] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.440055] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.440135] mice: PS/2 mouse device common for all mice
[ 0.440234] rtc_cmos 00:03: RTC can wake from S4
[ 0.440270] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.440298] rtc0: alarms up to one month, 242 bytes nvram
[ 0.440417] device-mapper: uevent: version 1.0.3
[ 0.443484] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.444976] device-mapper: multipath: version 1.1.0 loaded
[ 0.444979] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.448845] Freeing initrd memory: 8442k freed
[ 0.453493] cpuidle: using governor ladder
[ 0.453495] cpuidle: using governor menu
[ 0.453896] TCP cubic registered
[ 0.454024] NET: Registered protocol family 10
[ 0.454445] lo: Disabled Privacy Extensions
[ 0.454711] NET: Registered protocol family 17
[ 0.454746] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (1 cpu cores) (version 2.20.00)
[ 0.454792] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
[ 0.454795] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
[ 0.454797] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
[ 0.454799] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 0.455041] PM: Resume from disk failed.
[ 0.455058] registered taskstats version 1
[ 0.455417] Magic number: 14:116:170
[ 0.455495] rtc_cmos 00:03: setting system clock to 2010-06-22 08:11:44 UTC (1277194304)
[ 0.455498] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.455499] EDD information not available.
[ 0.455551] Freeing unused kernel memory: 876k freed
[ 0.456014] Write protecting the kernel read-only data: 7680k
[ 0.465748] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.472724] udev: starting version 151
[ 0.634687] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.634738] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 0.634843] scsi0 : pata_atiixp
[ 0.635074] scsi1 : pata_atiixp
[ 0.636081] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf300 irq 14
[ 0.636084] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf308 irq 15
[ 0.636365] sata_sil 0000:00:11.0: version 2.4
[ 0.636463] scsi2 : sata_sil
[ 0.639233] 8139too Fast Ethernet driver 0.9.28
[ 0.639337] scsi3 : sata_sil
[ 0.639422] ata3: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23
[ 0.639426] ata4: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23
[ 0.639499] alloc irq_desc for 20 on node 0
[ 0.639501] alloc kstat_irqs on node 0
[ 0.639508] 8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.641003] eth0: RealTek RTL8139 at 0xdd00, 00:11:09:07:d5:09, IRQ 20
[ 0.641656] scsi4 : sata_sil
[ 0.641755] scsi5 : sata_sil
[ 0.641790] ata5: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 22
[ 0.641794] ata6: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 22
[ 0.674936] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 0.835505] ata1.00: ATAPI: SONY DVD RW DRU-190A, 1.65, max UDMA/66
[ 0.835533] ata1.01: ATAPI: IDE-DVD DROM6216, HD07, max UDMA/100
[ 0.835551] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 0.835554] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 0.875486] ata1.00: configured for UDMA/33
[ 0.915487] ata1.01: configured for UDMA/33
[ 0.918027] scsi 0:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.65 PQ: 0 ANSI: 5
[ 0.924123] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.924125] Uniform CD-ROM driver Revision: 3.20
[ 0.924225] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.924276] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.925138] scsi 0:0:1:0: CD-ROM IDE-DVD DROM6216 HD07 PQ: 0 ANSI: 5
[ 0.928920] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 0.929071] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 0.929156] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 0.962502] usb 1-4: configuration #1 chosen from 1 choice
[ 0.984970] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.985062] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.005224] ata5.00: ATA-6: ST3200822AS, 3.02, max UDMA/100
[ 1.005227] ata5.00: 390721968 sectors, multi 16: LBA48
[ 1.045231] ata5.00: configured for UDMA/100
[ 1.420005] usb 2-4: new full speed USB device using ohci_hcd and address 2
[ 1.450023] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.450130] scsi 4:0:0:0: Direct-Access ATA ST3200822AS 3.02 PQ: 0 ANSI: 5
[ 1.450281] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.451101] sd 4:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.451141] sd 4:0:0:0: [sda] Write Protect is off
[ 1.451143] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.451164] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.451280] sda: sda1 sda2
[ 1.470871] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.643103] usb 2-4: configuration #1 chosen from 1 choice
[ 1.652917] Initializing USB Mass Storage driver...
[ 1.653013] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.653189] usbcore: registered new interface driver usb-storage
[ 1.653192] USB Mass Storage support registered.
[ 1.653260] usb-storage: device found at 2
[ 1.653261] usb-storage: waiting for device to settle before scanning
[ 1.800029] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.806736] ohci1394 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.820056] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 1.862049] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fdefd000-fdefd7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.042027] usb 3-1: configuration #1 chosen from 1 choice
[ 2.055658] usbcore: registered new interface driver hiddev
[ 2.060238] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input4
[ 2.060396] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:13.1-1/input0
[ 2.060420] usbcore: registered new interface driver usbhid
[ 2.060482] usbhid: v2.6:USB HID core driver
[ 2.402224] EXT4-fs (loop0): mounted filesystem with ordered data mode
[ 3.180155] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106660096d57e]
[ 6.650903] usb-storage: device scan complete
[ 6.656881] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.662868] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 6.668876] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 6.674867] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.675260] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.675368] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 6.675477] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 6.675579] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 6.724876] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.734868] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 6.744877] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 6.754877] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 15.645397] udev: starting version 151
[ 16.181387] cfg80211: Calling CRDA to update world regulatory domain
[ 16.209143] lp: driver loaded but no devices found
[ 16.393837] EDAC MC: Ver: 2.1.0 Jun 3 2010
[ 16.395730] parport_pc 00:07: reported by Plug and Play ACPI
[ 16.395778] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 16.470175] lp0: using parport0 (interrupt-driven).
[ 16.493655] EDAC amd64_edac: Ver: 3.2.0 Jun 3 2010
[ 16.493728] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 16.493733] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.493735] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.493736] (Note that use of the override may cause unknown side effects.)
[ 16.493754] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 16.509932] ppdev: user-space parallel port driver
[ 16.510473] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.607294] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
[ 16.675982] vga16fb: initializing
[ 16.675986] vga16fb: mapped to 0xffff8800000a0000
[ 16.676049] fb0: VGA16 VGA frame buffer device
[ 16.696946] cfg80211: World regulatory domain updated:
[ 16.696950] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.696953] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.696955] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.696958] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.696960] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.696963] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.987655] type=1505 audit(1277187121.024:2): operation="profile_load" pid=562 name="/sbin/dhclient3"
[ 16.987914] type=1505 audit(1277187121.024:3): operation="profile_load" pid=562 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.988061] type=1505 audit(1277187121.024:4): operation="profile_load" pid=562 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.556627] nvidia: module license 'NVIDIA' taints kernel.
[ 17.556631] Disabling lock debugging due to kernel taint
[ 18.517729] alloc irq_desc for 18 on node 0
[ 18.517733] alloc kstat_irqs on node 0
[ 18.517741] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 18.517748] nvidia 0000:01:00.0: setting latency timer to 64
[ 18.517753] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.518536] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010
[ 18.575023] phy0: Selected rate control algorithm 'minstrel'
[ 18.575796] Registered led device: rt2500usb-phy0::radio
[ 18.575813] Registered led device: rt2500usb-phy0::quality
[ 18.576359] usbcore: registered new interface driver rt2500usb
[ 18.861956] Console: switching to colour frame buffer device 80x30
[ 19.095566] alloc irq_desc for 17 on node 0
[ 19.095569] alloc kstat_irqs on node 0
[ 19.095577] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 20.135793] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k
[ 20.758377] type=1505 audit(1277187124.794:5): operation="profile_load" pid=788 name="/usr/share/gdm/guest-session/Xsession"
[ 20.774174] type=1505 audit(1277187124.814:6): operation="profile_replace" pid=789 name="/sbin/dhclient3"
[ 20.774444] type=1505 audit(1277187124.814:7): operation="profile_replace" pid=789 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 20.774598] type=1505 audit(1277187124.814:8): operation="profile_replace" pid=789 name="/usr/lib/connman/scripts/dhclient-script"
[ 20.801897] type=1505 audit(1277187124.844:9): operation="profile_load" pid=791 name="/usr/bin/evince"
[ 20.805333] type=1505 audit(1277187124.844:10): operation="profile_load" pid=791 name="/usr/bin/evince-previewer"
[ 20.807424] type=1505 audit(1277187124.844:11): operation="profile_load" pid=791 name="/usr/bin/evince-thumbnailer"
[ 84.260137] Marking TSC unstable due to cpufreq changes
[ 84.260194] Switching to clocksource acpi_pmifconfig me renvoie :
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:264 erreurs:0 :0 overruns:0 frame:0
TX packets:264 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:21120 (21.1 KB) Octets transmis:21120 (21.1 KB)Dernière modification par Coeur Noir (Le 22/06/2010, à 10:48)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#32 Le 22/06/2010, à 08:43
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Et bien vu pour le fichier interfaces, j'avais laissé les lignes précédentes 
donc là suis connecté en filaire sous 'buntu !
Votre FAI : Bouygues Telecom (Bouygues Dolmen)
Débit descendant : 15605 kbps (1950.6 Ko/s) - Débit montant : 806 kbps (100.8 Ko/s) - Ping : 37 ms
Testé sur http://www.degrouptest.com/test-debit.php - mar. 22 juin 2010 08:41:25 CET - Test n°8307121lshw -C Network renvoie :
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 3
bus info: pci@0000:02:03.0
logical name: eth0
version: 10
serial: 00:11:09:07:d5:09
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.3 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
resources: irq:20 ioport:dd00(size=256) memory:fdefe000-fdefe0ff
*-network DISABLED
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:14:a5:41:01:c8
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bgJe confirme cependant que sous les 2 noyaux, et avec le fichier interfaces modifié en conséquence (wlan ou eth), je parviens à me connecter en filaire mais pas en wifi.
Dans le dmesg, je vois une référence à NetworkManager, normal ? Et apparemment ma clé wifi usb est bien vue :
[ 16.987914] type=1505 audit(1277187121.024:3): operation="profile_load" pid=562 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.988061] type=1505 audit(1277187121.024:4): operation="profile_load" pid=562 name="/usr/lib/connman/scripts/dhclient-script"
(...)
[ 18.575796] Registered led device: rt2500usb-phy0::radio
[ 18.575813] Registered led device: rt2500usb-phy0::quality
[ 18.576359] usbcore: registered new interface driver rt2500usbDernière modification par Coeur Noir (Le 22/06/2010, à 10:49)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#33 Le 22/06/2010, à 13:51
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Ok ! Je regarderai de plus prêt ça dans l'après midi, la je reviens de moto et je vais manger !!!
Tant mieux si ton filiaire marche, pour info le fichier interfaces ne peut échouer sauf s'il est mal fait ou si la carte ethernet est éteinte ou un driver absent, comme elle marchait avant ca ne pouvait etre que ça !
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#34 Le 22/06/2010, à 17:53
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Merci... ça me rassure ! Me sens parfois très seul devant Ubuntu, surtout sans internet 
Question subsidiaire : à quoi servent les paquets "linux-backports-modules-wireless-generic meta-package" que j'ai aperçu dans synaptic en vérifiant que les noyaux 22 et 21 étaient bien installés ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#35 Le 22/06/2010, à 17:55
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Donne moi le cat /etc/network/interfaces
Je vais te donner tout pour faire les tests wifi. Tu te connecte sur ton propre wifi en WPA ?
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#36 Le 22/06/2010, à 18:08
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
auto eth0
iface eth0 inet dhcpC'est bien "mon" propre wifi en WPA.
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#37 Le 22/06/2010, à 20:31
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
rajoute :
auto wlan0
iface wlan0 inet dhcp
wireless_mode managed
wireless_essid (nom de ton réseau)
wireless_key (ta clé WPA)
wireless_channel (canal de ta box, met pas cette ligne si tu sais pas)et part contre tu as supprimé ces lignes ??
# The loopback interface
auto lo
iface lo inet loopbackTon fichier normalement devrait ressembler à ça :
# The loopback interface
auto lo
iface lo inet loopback
# The Ethernet
# auto eth0
# iface eth0 inet dhcp
auto wlan0
iface wlan0 inet dhcp
wireless_mode managed
wireless_essid (nom de ton réseau)
wireless_key (ta clé WPA)
wireless_channel (canal de ta box, met pas cette ligne si tu sais pas)Ton wireless sera désactivé mais ça ne t'inquiète pas c'est normal, il y a des #### de les lignes concernées (tu les enlèves et le wireless revient 
)
Dis moi si déjà tu vois les réseaux puis si tu te connectes.
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#38 Le 22/06/2010, à 23:13
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
De retour du taf'... je modifie interfaces en renseignant ce que je sais - le canal plus sûr que la box soit en sélection automatique donc pas écrit cette ligne.
Et rien (j'ai démarré sous le noyau précédent .21)
J'ouvre firefox, impossible de se connecter. Petit coup d'oeil à la clé wifi usb : aucune diode allumée.
- Y-a-t-il une commande pour forcer sa mise en route ?
- une commande pour afficher ce qu'elle "voit" ?
Du coup, remodif' d'interfaces : mis des # devant les lignes wireless et enlevé ceux devant les lignes eth et redémarrage sous le noyau le plus récent.
interfaces =
# The loopback interface
auto lo
iface lo inet loopback
# The Ethernet
auto eth0
iface eth0 inet dhcp
#auto wlan0
#iface wlan0 inet dhcp
#wireless_mode managed
#wireless_essid Coeur Noir
#wireless_key Hohénançavapalatêtelsusb me renvoie :
Bus 003 Device 002: ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:2570 Ralink Technology, Corp. 802.11g WiFi
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub-> la clé wifi est vue par le système (5ème ligne)
lshw -C network renvoie :
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 3
bus info: pci@0000:02:03.0
logical name: eth0
version: 10
serial: 00:11:09:07:d5:09
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.3 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
resources: irq:20 ioport:dd00(size=256) memory:fdefe000-fdefe0ff
*-network DISABLED
description: Wireless interface
physical id: 1
bus info: usb@1:4
logical name: wlan0
serial: 00:14:a5:41:01:c8
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rt2500usb driverversion=2.6.32-22-generic firmware=N/A link=yes multicast=yes wireless=IEEE 802.11bg-> la clé a un driver, y compris dans le dernier noyau (?)
Dernière modification par Coeur Noir (Le 23/06/2010, à 08:26)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#39 Le 23/06/2010, à 08:27
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
en fait il faudrait que tu me fasses le test (échoué je sais) du wireless sans l'ethernet, donc inverser les # que je puisse voir les erreurs qui empechent la connexion.
donc refait la meme chose, juste un démarrage, le truc va lire le fichier interfaces, essayer de se c puis dire l'erreur qui bloque
ensuite tu me donnes le
lshw -C Network
lsmod (pour vérifier le driver)
dmesg (c'est la dedans que sont écrites les erreurs)
nm-tool (pour voir le statut de wlan0)
la on devrait avancer
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#40 Le 23/06/2010, à 08:55
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Alors... suis pas sûr d'avoir réussi à copier "tout" le résultat de demsg - long !
lshw =
*-network DISABLED
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 3
bus info: pci@0000:02:03.0
logical name: eth0
version: 10
serial: 00:11:09:07:d5:09
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
resources: irq:20 ioport:dd00(size=256) memory:fdefe000-fdefe0ff
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:4
logical name: wlan0
serial: 00:14:a5:41:01:c8
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rt2500usb driverversion=2.6.32-22-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg
lsmod =
Module Size Used by
binfmt_misc 7960 1
snd_atiixp 15234 2
snd_ac97_codec 125394 1 snd_atiixp
ac97_bus 1450 1 snd_ac97_codec
snd_pcm_oss 41394 0
snd_mixer_oss 16299 1 snd_pcm_oss
snd_pcm 87850 3 snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 1782 0
snd_seq_oss 31219 0
snd_seq_midi 5829 0
snd_rawmidi 23388 1 snd_seq_midi
fbcon 39270 71
snd_seq_midi_event 7267 2 snd_seq_oss,snd_seq_midi
tileblit 2487 1 fbcon
font 8053 1 fbcon
bitblit 5811 1 fbcon
arc4 1473 2
softcursor 1565 1 bitblit
snd_seq 57417 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
nvidia 10832442 38
snd_timer 23553 2 snd_pcm,snd_seq
rt2500usb 19014 0
snd_seq_device 6824 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
rt2x00usb 11243 1 rt2500usb
vga16fb 12757 1
rt2x00lib 31500 2 rt2500usb,rt2x00usb
vgastate 9857 1 vga16fb
snd 70978 14 snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
led_class 3732 1 rt2x00lib
soundcore 8052 1 snd
i2c_piix4 9639 0
snd_page_alloc 8500 2 snd_atiixp,snd_pcm
compat_firmware_class 8491 1 rt2x00lib
shpchp 33679 0
ppdev 6375 0
mac80211 243373 2 rt2x00usb,rt2x00lib
k8temp 3912 0
cfg80211 152987 2 rt2x00lib,mac80211
edac_core 45423 0
parport_pc 29958 1
edac_mce_amd 9214 0
lp 9336 0
parport 37160 3 ppdev,parport_pc,lp
usbhid 40988 0
hid 83376 1 usbhid
8139too 22245 0
8139cp 19541 0
ohci1394 30260 0
usb_storage 49833 0
mii 5237 2 8139too,8139cp
ieee1394 94675 1 ohci1394
pata_atiixp 4209 0
sata_sil 8895 1
dmesg =
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fef0
[ 0.000000] On node 0 totalpages: 261759
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 100 pages reserved
[ 0.000000] DMA zone: 3827 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3525 pages used for memmap
[ 0.000000] DMA32 zone: 254251 pages, LIFO batch:31
[ 0.000000] SB4X0 revision 0x10
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:a0100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u2097152
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258078
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=/dev/sda2 loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 4106000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1013584k/1047488k available (5409k kernel code, 452k absent, 33452k reserved, 2976k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 10485760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2188.423 MHz processor.
[ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4376.84 BogoMIPS (lpj=21884230)
[ 0.020032] Security Framework initialized
[ 0.020053] AppArmor: AppArmor initialized
[ 0.020157] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.020808] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.021101] Mount-cache hash table entries: 256
[ 0.021245] Initializing cgroup subsys ns
[ 0.021249] Initializing cgroup subsys cpuacct
[ 0.021253] Initializing cgroup subsys memory
[ 0.021263] Initializing cgroup subsys devices
[ 0.021265] Initializing cgroup subsys freezer
[ 0.021267] Initializing cgroup subsys net_cls
[ 0.021287] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.021289] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.021292] CPU 0/0x0 -> Node 0
[ 0.021294] tseg: 003ff00000
[ 0.021297] mce: CPU supports 5 MCE banks
[ 0.021308] Performance Events: AMD PMU driver.
[ 0.021313] ... version: 0
[ 0.021314] ... bit width: 48
[ 0.021316] ... generic registers: 4
[ 0.021318] ... value mask: 0000ffffffffffff
[ 0.021319] ... max period: 00007fffffffffff
[ 0.021321] ... fixed-purpose events: 0
[ 0.021323] ... event mask: 000000000000000f
[ 0.021334] SMP alternatives: switching to UP code
[ 0.033374] Freeing SMP alternatives: 40k freed
[ 0.033399] ACPI: Core revision 20090903
[ 0.040021] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040032] ftrace: allocating 22518 entries in 89 pages
[ 0.045161] Setting APIC routing to flat
[ 0.045371] alloc irq_desc for 21 on node 0
[ 0.045373] alloc kstat_irqs on node 0
[ 0.045514] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.148988] CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01
[ 0.150000] Brought up 1 CPUs
[ 0.150000] Total of 1 processors activated (4376.84 BogoMIPS).
[ 0.150000] CPU0 attaching NULL sched-domain.
[ 0.150000] devtmpfs: initialized
[ 0.150000] regulator: core version 0.5
[ 0.150000] Time: 8:39:04 Date: 06/23/10
[ 0.150000] NET: Registered protocol family 16
[ 0.150000] node 0 link 0: io port [d000, ffff]
[ 0.150000] TOM: 0000000040000000 aka 1024M
[ 0.150000] node 0 link 0: mmio [a0000, bffff]
[ 0.150000] node 0 link 0: mmio [40000000, fe02ffff]
[ 0.150000] node 0 link 0: mmio [e0000000, e02fffff]
[ 0.150000] bus: [00,02] on node 0 link 0
[ 0.150000] bus: 00 index 0 io port: [0, ffff]
[ 0.150000] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.150000] bus: 00 index 2 mmio: [40000000, fcffffffff]
[ 0.150000] ACPI: bus type pci registered
[ 0.150000] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 0
[ 0.150000] PCI: MCFG area at e0000000 reserved in E820
[ 0.150000] PCI: Using MMCONFIG at e0000000 - e00fffff
[ 0.150000] PCI: Using configuration type 1 for base access
[ 0.150000] bio: create slab <bio-0> at 0
[ 0.150000] ACPI: EC: Look up EC in DSDT
[ 0.150000] ACPI Warning: Package List length (0x6) larger than NumElements count (0x4), truncated
[ 0.150000] (20090903/dsobject-515)
[ 0.150000] ACPI: Interpreter enabled
[ 0.150000] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.150000] ACPI: Using IOAPIC for interrupt routing
[ 0.150000] ACPI: No dock devices found.
[ 0.150000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.150000] pci 0000:00:00.0: reg 18 io port: [0x4100-0x411f]
[ 0.150000] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.150000] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.150000] pci 0000:00:02.0: PME# disabled
[ 0.150000] pci 0000:00:11.0: reg 10 io port: [0xfe00-0xfe07]
[ 0.150000] pci 0000:00:11.0: reg 14 io port: [0xfd00-0xfd03]
[ 0.150000] pci 0000:00:11.0: reg 18 io port: [0xfc00-0xfc07]
[ 0.150000] pci 0000:00:11.0: reg 1c io port: [0xfb00-0xfb03]
[ 0.150000] pci 0000:00:11.0: reg 20 io port: [0xfa00-0xfa0f]
[ 0.150000] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
[ 0.150000] pci 0000:00:11.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.150000] pci 0000:00:11.0: supports D1 D2
[ 0.150000] pci 0000:00:12.0: reg 10 io port: [0xf900-0xf907]
[ 0.150000] pci 0000:00:12.0: reg 14 io port: [0xf800-0xf803]
[ 0.150000] pci 0000:00:12.0: reg 18 io port: [0xf700-0xf707]
[ 0.150000] pci 0000:00:12.0: reg 1c io port: [0xf600-0xf603]
[ 0.150000] pci 0000:00:12.0: reg 20 io port: [0xf500-0xf50f]
[ 0.150000] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02e000-0xfe02e1ff]
[ 0.150000] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.150000] pci 0000:00:12.0: supports D1 D2
[ 0.150000] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.150000] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.150000] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.150000] pci 0000:00:13.2: supports D1 D2
[ 0.150000] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.150000] pci 0000:00:13.2: PME# disabled
[ 0.150000] pci 0000:00:14.0: reg 10 io port: [0x400-0x40f]
[ 0.150000] pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02a000-0xfe02a3ff]
[ 0.150000] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.150000] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.150000] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.150000] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.150000] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.150000] pci 0000:00:14.1: reg 20 io port: [0xf300-0xf30f]
[ 0.150000] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.150000] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.150000] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.150000] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
[ 0.150000] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.150059] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[ 0.150062] pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
[ 0.150066] pci 0000:00:02.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.150125] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff]
[ 0.150135] pci 0000:02:01.0: reg 14 io port: [0xdf00-0xdf07]
[ 0.150146] pci 0000:02:01.0: reg 18 io port: [0xde00-0xdeff]
[ 0.150211] pci 0000:02:01.0: supports D2
[ 0.150213] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
[ 0.150219] pci 0000:02:01.0: PME# disabled
[ 0.150279] pci 0000:02:03.0: reg 10 io port: [0xdd00-0xddff]
[ 0.150290] pci 0000:02:03.0: reg 14 32bit mmio: [0xfdefe000-0xfdefe0ff]
[ 0.150362] pci 0000:02:03.0: supports D1 D2
[ 0.150364] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.150370] pci 0000:02:03.0: PME# disabled
[ 0.150430] pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefd000-0xfdefd7ff]
[ 0.150441] pci 0000:02:04.0: reg 14 io port: [0xdc00-0xdc7f]
[ 0.150516] pci 0000:02:04.0: supports D2
[ 0.150518] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.150524] pci 0000:02:04.0: PME# disabled
[ 0.150592] pci 0000:00:14.4: transparent bridge
[ 0.150601] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[ 0.150606] pci 0000:00:14.4: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.150612] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.150628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.150770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.163854] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.163933] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.164011] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.164089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.164166] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
[ 0.164243] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11)
[ 0.164320] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *10 11)
[ 0.164397] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11)
[ 0.164486] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.164489] vgaarb: loaded
[ 0.164584] SCSI subsystem initialized
[ 0.164629] libata version 3.00 loaded.
[ 0.164691] usbcore: registered new interface driver usbfs
[ 0.164702] usbcore: registered new interface driver hub
[ 0.164723] usbcore: registered new device driver usb
[ 0.164825] ACPI: WMI: Mapper loaded
[ 0.164827] PCI: Using ACPI for IRQ routing
[ 0.164836] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.164838] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.164982] NetLabel: Initializing
[ 0.164983] NetLabel: domain hash size = 128
[ 0.164985] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.164997] NetLabel: unlabeled traffic allowed by default
[ 0.165021] Switching to clocksource tsc
[ 0.166575] AppArmor: AppArmor Filesystem Enabled
[ 0.166589] pnp: PnP ACPI init
[ 0.166604] ACPI: bus type pnp registered
[ 0.166998] pnp 00:01: io resource (0x40b-0x40b) overlaps 0000:00:14.0 BAR 0 (0x400-0x40f), disabling
[ 0.168561] pnp 00:0a: mem resource (0xd0000-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168564] pnp 00:0a: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168568] pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168571] pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168574] pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168578] pnp 00:0a: mem resource (0x100000-0x3feeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.168623] pnp: PnP ACPI: found 11 devices
[ 0.168624] ACPI: ACPI bus type pnp unregistered
[ 0.168634] system 00:01: ioport range 0x228-0x22f has been reserved
[ 0.168637] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
[ 0.168640] system 00:01: ioport range 0xc00-0xc01 has been reserved
[ 0.168646] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.168648] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.168651] system 00:01: ioport range 0xc6c-0xc6d has been reserved
[ 0.168653] system 00:01: ioport range 0xc6f-0xc6f has been reserved
[ 0.168656] system 00:01: ioport range 0xcd4-0xcdf has been reserved
[ 0.168659] system 00:01: ioport range 0x4000-0x40fe has been reserved
[ 0.168662] system 00:01: ioport range 0x4210-0x4217 has been reserved
[ 0.168673] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.168675] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.168681] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.168689] system 00:0a: iomem range 0x3ff00000-0x3fffffff could not be reserved
[ 0.168692] system 00:0a: iomem range 0x3fef0000-0x3fefffff could not be reserved
[ 0.168695] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.168698] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.168701] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.168704] system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.169985] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.169985] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.169985] pci 0000:00:02.0: MEM window: 0xfa000000-0xfcffffff
[ 0.169985] pci 0000:00:02.0: PREFETCH window: 0xd0000000-0xdfffffff
[ 0.169985] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
[ 0.169985] pci 0000:00:14.4: IO window: 0xd000-0xdfff
[ 0.169985] pci 0000:00:14.4: MEM window: 0xfde00000-0xfdefffff
[ 0.169985] pci 0000:00:14.4: PREFETCH window: 0xfdd00000-0xfddfffff
[ 0.169985] pci 0000:00:02.0: setting latency timer to 64
[ 0.169985] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.169985] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.169985] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.169985] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff]
[ 0.169985] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.169985] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.169985] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.169985] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.169985] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.169985] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.169985] NET: Registered protocol family 2
[ 0.169985] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.169985] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.170307] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.170907] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.170909] TCP reno registered
[ 0.170999] NET: Registered protocol family 1
[ 0.171017] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.224994] pci 0000:01:00.0: Boot video device
[ 0.225353] Scanning for low memory corruption every 60 seconds
[ 0.225471] audit: initializing netlink socket (disabled)
[ 0.225481] type=2000 audit(1277282344.224:1): initialized
[ 0.233978] Trying to unpack rootfs image as initramfs...
[ 0.245222] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.246498] VFS: Disk quotas dquot_6.5.2
[ 0.246549] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.255087] fuse init (API version 7.13)
[ 0.255201] msgmni has been set to 1979
[ 0.255429] alg: No test for stdrng (krng)
[ 0.255482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.255485] io scheduler noop registered
[ 0.255487] io scheduler anticipatory registered
[ 0.255489] io scheduler deadline registered
[ 0.255521] io scheduler cfq registered (default)
[ 0.255667] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.255687] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.255764] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.255768] ACPI: Power Button [PWRB]
[ 0.255816] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.255818] ACPI: Power Button [PWRF]
[ 0.256026] processor LNXCPU:00: registered as cooling_device0
[ 0.258555] Linux agpgart interface v0.103
[ 0.258589] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.259643] brd: module loaded
[ 0.260051] loop: module loaded
[ 0.260125] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.265193] alloc irq_desc for 23 on node 0
[ 0.265196] alloc kstat_irqs on node 0
[ 0.265205] pata_acpi 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.265326] alloc irq_desc for 22 on node 0
[ 0.265328] alloc kstat_irqs on node 0
[ 0.265332] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.265399] alloc irq_desc for 16 on node 0
[ 0.265401] alloc kstat_irqs on node 0
[ 0.265405] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.275357] Fixed MDIO Bus: probed
[ 0.275391] PPP generic driver version 2.4.2
[ 0.275442] tun: Universal TUN/TAP device driver, 1.6
[ 0.275444] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.275530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.275577] alloc irq_desc for 19 on node 0
[ 0.275579] alloc kstat_irqs on node 0
[ 0.275587] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.275606] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.275644] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.275714] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
[ 0.294993] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.295135] usb usb1: configuration #1 chosen from 1 choice
[ 0.295168] hub 1-0:1.0: USB hub found
[ 0.295178] hub 1-0:1.0: 8 ports detected
[ 0.295282] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.305106] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.305131] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.305204] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.305227] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
[ 0.369342] usb usb2: configuration #1 chosen from 1 choice
[ 0.369375] hub 2-0:1.0: USB hub found
[ 0.369388] hub 2-0:1.0: 4 ports detected
[ 0.375073] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.375096] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.375171] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.375194] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
[ 0.439236] usb usb3: configuration #1 chosen from 1 choice
[ 0.439271] hub 3-0:1.0: USB hub found
[ 0.439284] hub 3-0:1.0: 4 ports detected
[ 0.439368] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.439447] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.439449] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.440214] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.440294] mice: PS/2 mouse device common for all mice
[ 0.440392] rtc_cmos 00:03: RTC can wake from S4
[ 0.440429] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.440456] rtc0: alarms up to one month, 242 bytes nvram
[ 0.440575] device-mapper: uevent: version 1.0.3
[ 0.443683] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.445303] device-mapper: multipath: version 1.1.0 loaded
[ 0.445306] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.448959] Freeing initrd memory: 8444k freed
[ 0.453660] cpuidle: using governor ladder
[ 0.453663] cpuidle: using governor menu
[ 0.454057] TCP cubic registered
[ 0.454185] NET: Registered protocol family 10
[ 0.454605] lo: Disabled Privacy Extensions
[ 0.454872] NET: Registered protocol family 17
[ 0.454907] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (1 cpu cores) (version 2.20.00)
[ 0.454954] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
[ 0.454956] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
[ 0.454959] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
[ 0.454961] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 0.455200] PM: Resume from disk failed.
[ 0.455218] registered taskstats version 1
[ 0.455577] Magic number: 14:706:675
[ 0.455625] vtconsole vtcon0: hash matches
[ 0.455657] rtc_cmos 00:03: setting system clock to 2010-06-23 08:39:04 UTC (1277282344)
[ 0.455660] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.455661] EDD information not available.
[ 0.455713] Freeing unused kernel memory: 876k freed
[ 0.456171] Write protecting the kernel read-only data: 7680k
[ 0.465878] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.472913] udev: starting version 151
[ 0.629943] scsi0 : pata_atiixp
[ 0.630129] scsi1 : pata_atiixp
[ 0.631149] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf300 irq 14
[ 0.631151] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf308 irq 15
[ 0.631461] sata_sil 0000:00:11.0: version 2.4
[ 0.631561] scsi2 : sata_sil
[ 0.631656] scsi3 : sata_sil
[ 0.631729] ata3: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 23
[ 0.631733] ata4: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 23
[ 0.633429] scsi4 : sata_sil
[ 0.633606] scsi5 : sata_sil
[ 0.633643] ata5: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e080 irq 22
[ 0.633647] ata6: SATA max UDMA/100 mmio m512@0xfe02e000 tf 0xfe02e0c0 irq 22
[ 0.675046] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 0.825629] ata1.00: ATAPI: SONY DVD RW DRU-190A, 1.65, max UDMA/66
[ 0.825657] ata1.01: ATAPI: IDE-DVD DROM6216, HD07, max UDMA/100
[ 0.825675] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 0.825678] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 0.865643] ata1.00: configured for UDMA/33
[ 0.905662] ata1.01: configured for UDMA/33
[ 0.908223] scsi 0:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.65 PQ: 0 ANSI: 5
[ 0.914299] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.914302] Uniform CD-ROM driver Revision: 3.20
[ 0.914405] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.914459] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.915480] scsi 0:0:1:0: CD-ROM IDE-DVD DROM6216 HD07 PQ: 0 ANSI: 5
[ 0.919217] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 0.919366] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 0.919449] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 0.963154] usb 1-4: configuration #1 chosen from 1 choice
[ 0.975156] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.975232] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.995403] ata5.00: ATA-6: ST3200822AS, 3.02, max UDMA/100
[ 0.995406] ata5.00: 390721968 sectors, multi 16: LBA48
[ 1.035439] ata5.00: configured for UDMA/100
[ 1.430008] usb 2-4: new full speed USB device using ohci_hcd and address 2
[ 1.440026] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.440134] scsi 4:0:0:0: Direct-Access ATA ST3200822AS 3.02 PQ: 0 ANSI: 5
[ 1.440288] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.441131] sd 4:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.441173] sd 4:0:0:0: [sda] Write Protect is off
[ 1.441175] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.441197] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.441317] sda: sda1 sda2
[ 1.455591] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.653404] usb 2-4: configuration #1 chosen from 1 choice
[ 1.661450] Initializing USB Mass Storage driver...
[ 1.661546] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.661666] usbcore: registered new interface driver usb-storage
[ 1.661669] USB Mass Storage support registered.
[ 1.661737] usb-storage: device found at 2
[ 1.661739] usb-storage: waiting for device to settle before scanning
[ 1.790066] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.797836] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.799133] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.803032] 8139too Fast Ethernet driver 0.9.28
[ 1.803080] ohci1394 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.830045] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 1.862046] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fdefd000-fdefd7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.867486] alloc irq_desc for 20 on node 0
[ 1.867489] alloc kstat_irqs on node 0
[ 1.867496] 8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.868990] eth0: RealTek RTL8139 at 0xdd00, 00:11:09:07:d5:09, IRQ 20
[ 2.051526] usb 3-1: configuration #1 chosen from 1 choice
[ 2.064146] usbcore: registered new interface driver hiddev
[ 2.068717] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input4
[ 2.068885] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:13.1-1/input0
[ 2.068911] usbcore: registered new interface driver usbhid
[ 2.068975] usbhid: v2.6:USB HID core driver
[ 2.478979] EXT4-fs (loop0): mounted filesystem with ordered data mode
[ 3.180138] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106660096d57e]
[ 6.660258] usb-storage: device scan complete
[ 6.666238] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.672243] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 6.678244] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 6.684244] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.684673] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.684788] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 6.684904] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 6.685441] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 6.734243] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.744239] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 6.754238] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 6.764256] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 15.835473] udev: starting version 151
[ 16.332827] lp: driver loaded but no devices found
[ 16.450164] parport_pc 00:07: reported by Plug and Play ACPI
[ 16.450209] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 16.463266] EDAC MC: Ver: 2.1.0 Jun 3 2010
[ 16.505796] cfg80211: Calling CRDA to update world regulatory domain
[ 16.530178] lp0: using parport0 (interrupt-driven).
[ 16.566652] EDAC amd64_edac: Ver: 3.2.0 Jun 3 2010
[ 16.567024] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 16.567029] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.567030] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.567032] (Note that use of the override may cause unknown side effects.)
[ 16.567049] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 16.687923] ppdev: user-space parallel port driver
[ 16.689431] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.767267] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400, revision 0
[ 16.925018] vga16fb: initializing
[ 16.925023] vga16fb: mapped to 0xffff8800000a0000
[ 16.925122] fb0: VGA16 VGA frame buffer device
[ 16.968725] cfg80211: World regulatory domain updated:
[ 16.968728] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.968732] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.968734] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.968737] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.968739] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.968741] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.003820] type=1505 audit(1277275161.044:2): operation="profile_load" pid=558 name="/sbin/dhclient3"
[ 17.004079] type=1505 audit(1277275161.044:3): operation="profile_load" pid=558 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.004227] type=1505 audit(1277275161.044:4): operation="profile_load" pid=558 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.953237] nvidia: module license 'NVIDIA' taints kernel.
[ 17.953242] Disabling lock debugging due to kernel taint
[ 18.915751] phy0: Selected rate control algorithm 'minstrel'
[ 18.916401] Registered led device: rt2500usb-phy0::radio
[ 18.916417] Registered led device: rt2500usb-phy0::quality
[ 18.916815] alloc irq_desc for 18 on node 0
[ 18.916817] alloc kstat_irqs on node 0
[ 18.916825] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 18.916832] nvidia 0000:01:00.0: setting latency timer to 64
[ 18.916837] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.916906] usbcore: registered new interface driver rt2500usb
[ 18.920281] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010
[ 19.186186] Console: switching to colour frame buffer device 80x30
[ 19.427559] alloc irq_desc for 17 on node 0
[ 19.427563] alloc kstat_irqs on node 0
[ 19.427571] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 19.458628] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.309592] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 20.617230] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k
[ 21.147928] type=1505 audit(1277275165.184:5): operation="profile_load" pid=794 name="/usr/share/gdm/guest-session/Xsession"
[ 21.153362] type=1505 audit(1277275165.194:6): operation="profile_replace" pid=796 name="/sbin/dhclient3"
[ 21.153621] type=1505 audit(1277275165.194:7): operation="profile_replace" pid=796 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 21.153777] type=1505 audit(1277275165.194:8): operation="profile_replace" pid=796 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.216745] type=1505 audit(1277275165.254:9): operation="profile_load" pid=799 name="/usr/bin/evince"
[ 21.220215] type=1505 audit(1277275165.264:10): operation="profile_load" pid=799 name="/usr/bin/evince-previewer"
[ 21.232274] type=1505 audit(1277275165.274:11): operation="profile_load" pid=799 name="/usr/bin/evince-thumbnailer"
[ 84.690208] Marking TSC unstable due to cpufreq changes
[ 84.690264] Switching to clocksource acpi_pm
nm-tool =
Le programme « nm-tool » n'est pas installé. Vous pouvez l'installer en saisissant :
sudo apt-get install network-managerDébuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#41 Le 23/06/2010, à 09:43
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Oups j'avais oublié que tu était en WPA........
Pardon ! 
Il faut paramétrer les ficiers ainsi pour le WPA :
http://www.commentcamarche.net/faq/11210-configurer-le-wifi-sous-linux#en-wpa
On va y voir plus clair ensuite. (tu remplaces les "nano" par ton éditeur de texte habituel)
Dernière modification par Marmounette (Le 23/06/2010, à 09:44)
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#42 Le 23/06/2010, à 09:59
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
No souci !
Ai suivi les indications de la page que tu proposes, pour l'instant ça donne :
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/wlan0/00:14:a5:41:01:c8
Sending on LPF/wlan0/00:14:a5:41:01:c8
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 19
No DHCPOFFERS received.
No working leases in persistent database - sleeping.Bon là je redémarre sans eth0, seulement wlan0...
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#43 Le 23/06/2010, à 10:17
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Ah déjà les erreurs me plaisent beaucoup plus 
Probleme que j'ai deja vu en fait
Bon par contre j'ai hyper masse de taff qui me sont tombés dessus donc je te reprends ce soir, j'oublie pas promis 
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#44 Le 23/06/2010, à 10:19
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
[edit]OOOOppsss, chassé-croisé dans les réponses ! Prends ton temps, ce soir je bosse jusque 23h ! Avec toi et un cable ethernet je ne suis plus seul ![/edit]
Donc après reboot sans eth0 et seulement wlan0, pas mieux, c'est à dire zéro connexion, dmesg renvoie :
[ 19.212631] phy0: Selected rate control algorithm 'minstrel'
[ 19.213302] Registered led device: rt2500usb-phy0::radio
[ 19.213321] Registered led device: rt2500usb-phy0::quality
[ 19.213897] usbcore: registered new interface driver rt2500usb
[ 19.575926] alloc irq_desc for 17 on node 0
[ 19.575930] alloc kstat_irqs on node 0
[ 19.575938] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 20.205943] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.690384] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k
[ 21.236563] type=1505 audit(1277280170.284:5): operation="profile_load" pid=807 name="/usr/share/gdm/guest-session/Xsession"
[ 21.241506] type=1505 audit(1277280170.294:6): operation="profile_replace" pid=810 name="/sbin/dhclient3"
[ 21.241769] type=1505 audit(1277280170.294:7): operation="profile_replace" pid=810 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 21.241925] type=1505 audit(1277280170.294:8): operation="profile_replace" pid=810 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.313472] type=1505 audit(1277280170.364:9): operation="profile_load" pid=812 name="/usr/bin/evince"
[ 21.316931] type=1505 audit(1277280170.364:10): operation="profile_load" pid=812 name="/usr/bin/evince-previewer"
[ 21.319013] type=1505 audit(1277280170.364:11): operation="profile_load" pid=812 name="/usr/bin/evince-thumbnailer"
[ 84.800102] Marking TSC unstable due to cpufreq changes
[ 84.800163] Switching to clocksource acpi_pmCes lignes-là m'intriguent :
[ 21.241506] type=1505 audit(1277280170.294:6): operation="profile_replace" pid=810 name="/sbin/dhclient3"
[ 21.241769] type=1505 audit(1277280170.294:7): operation="profile_replace" pid=810 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 21.241925] type=1505 audit(1277280170.294:8): operation="profile_replace" pid=810 name="/usr/lib/connman/scripts/dhclient-script"
et plus haut
[ 19.212631] phy0: Selected rate control algorithm 'minstrel'
[ 19.213302] Registered led device: rt2500usb-phy0::radio
[ 19.213321] Registered led device: rt2500usb-phy0::quality
[ 19.213897] usbcore: registered new interface driver rt2500usb
Que penses-tu de cette source d'infos pour WPA ?
http://doc.ubuntu-fr.org/wpa#methode_complete_et_propre
Dernière modification par Coeur Noir (Le 23/06/2010, à 10:24)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#45 Le 23/06/2010, à 10:28
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Bah les trois dernières sont normales,
La source d'infos est bonne, similaire à celle que je t'ai donné mais je n'était pas tombée sur celle directe d'ubuntu, ils font la meme configuration, enfin il me semble oO
Mais là je ne vois pas pourquoi il ne veut pas du tout se connecter tout de meme...
Revérifie les fichiers avec la doc ubuntu, pour voir s'il y a une erreur, sinon on va remettre le filiaire, remettre Network Manager (il va rependre les configurations d'avant, donc un wifi lent)
et on va tenter de chercher autour du driver en surveillant dmesg des que tu te connectes.
bon je taaaaaaaaaaaaff XD
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#46 Le 23/06/2010, à 10:37
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Ensuite on peut tester NDiswrapper, ca a l'air de bien fonctionné avec ta clé wifi et ton soucis
http://forum.ubuntu-fr.org/viewtopic.php?id=155935
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#47 Le 23/06/2010, à 11:08
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
C'est déroutant n'est-ce pas ? Surtout que cela a très bien fonctionné pendant 2-3 semaines !
Quelques infos supp. genre iwconfig :
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on-> normal le Access Point not associated alors qu'on a un fichier wpa_supplicant.conf ???
if config
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:8 erreurs:0 :0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:480 (480.0 B) Octets transmis:480 (480.0 B)
wlan0 Link encap:Ethernet HWaddr 00:14:a5:41:01:c8
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
wlan0:avahi Link encap:Ethernet HWaddr 00:14:a5:41:01:c8
inet adr:169.254.7.14 Bcast:169.254.255.255 Masque:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1-> nouveau ! wlan0:avahi n'apparaissait pas lors des essais précédents.
Mince... j'ai oublié iwlist scan. Et sinon le wpa_supplicant.conf :
ctrl_interface=/etc/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
network={
ssid="Coeur Noir"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
psk=trululutralalatrololo
priority=5
}Ce que j'ai changé par rapport aux exemples :
- ctrl_interface qui chez moi n'est pas dans /usr/var
Pourquoi priority = 5 ? Et pas 1 ?
Dernière modification par Coeur Noir (Le 23/06/2010, à 11:15)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#48 Le 23/06/2010, à 11:28
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
oui c'est normal si avahi apparait.
par contre ce qui m'embete c'est qu'on arrive pas a l'activer ni en interfaces sans wpa.conf ni avec wpa.conf...
je pense qu'il faut repartir en Network Manager et Ndiswrapper...
la ça me déroute de pas réussir à la conf en dur oO
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne
#49 Le 23/06/2010, à 16:27
- Coeur Noir
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Ouiiiiin !
Je vais encore avoir besoin de ton aide !
Ai installé ndiswrapper + le pilote windows de ma clé wifi.
Blacklisté les anciens.
Réinstallé network-manager.
Laissé que les 2 premières lignes dans le fichier interfaces.
Et Network ne me propose pas de réseau sans fil...
Le filaire fonctionne, ouf.
Ma clé wifi usb apparaît dans lsusb. Mais :
coeurnoir@ubuntu:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:09:07:d5:09
inet adr:192.168.1.3 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::211:9ff:fe07:d509/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:2029 erreurs:0 :0 overruns:0 frame:0
TX packets:2019 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:1805644 (1.8 MB) Octets transmis:368308 (368.3 KB)
Interruption:20 Adresse de base:0xdd00
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:8 erreurs:0 :0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:480 (480.0 B) Octets transmis:480 (480.0 B)
coeurnoir@ubuntu:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#50 Le 23/06/2010, à 16:33
- Marmounette
Re : [Non résolu] Déconnexions wifi puis débits ridicules...
Bon on va repartir de là !
pfiou ><
on refait toutes les commandes de départ, je dois tout relire et tu ajoutes dmesg | tail -30
(ne désespère on va le trouver le wifi ^^)
Il reste un gnocchi devant mes yeux... Ah non il vient de disparaître ! :D
Hors ligne