#276 Le 27/12/2010, à 12:31
- LeLoupTénébreux
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
OK bon je vais repasser à grub2 alors ... On verra dans l'avenir.
Hors ligne
#277 Le 29/12/2010, à 15:03
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Bonjour,
Mise à jour de MultiSystem disponible.
-Modification du support de Puppy Linux pour support de la dernière version
Distribution Release: Puppy Linux 5.0 "Wary"
Distrowatch: http://distrowatch.com/?newsid=06434
Hors ligne
#278 Le 31/12/2010, à 10:43
- benoit2600
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Et hop, un don d'effectué, un ! (c'est un payement par paypal en différé, ça prend entre 8-10 jours pour que la transaction s'effectue)
Merc pour ton logiciel, il est génial !
je viens juste de me faire un multi-system avec :
ubuntu 10.10
hiren's boot cd 12
ophcrack
trinity
backtrack R2
Gparted live CD
et konboot
merci encore !
edit : sous windows, a quoi sert le script .bat qui se lance lors d'un double clique sur la clé usb ? est-il essentiel ? car je trouve ennuyeux de devoir faire clique droit -> explorer pour accéder à mes documents sur ma clé.
Dernière modification par benoit2600 (Le 31/12/2010, à 11:05)
Hors ligne
#279 Le 31/12/2010, à 12:26
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@benoit2600
Bonjour,
Merci pour ta donation 
le script .bat virtualise la clé USB dans virtualbox si il est installé,
tu peu le suprimer si il te derange.
edite /autorun.inf situé à la racine de ta clé usb et supprime la ligne: Shellexecute=multisystem.bat
Hors ligne
#280 Le 01/01/2011, à 00:33
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@A Tous
Bonne et hereuse année 2011 à vous !
Et merci pour votre fidélité 
Dernière modification par frafa (Le 01/01/2011, à 00:47)
Hors ligne
#281 Le 01/01/2011, à 00:38
- Levi59
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Et Meilleurs voeux!
J- 720 jours 23 heures 22 minutes avant la fin du monde!
Hors ligne
#282 Le 02/01/2011, à 17:12
- uboops
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Bonne année 2011 à tous !
Levi59 a écrit :
Et Meilleurs voeux!
J- 720 jours 23 heures 22 minutes avant la fin du monde!
Ben non, ne soyons pas abusivement pessimiste en ce début d' année, il suffit juste de reformuler la phrase afin d'écrire éventuellement:
J- 720 jours 23 heures 22 minutes avant la fin d'un monde.
(afin d'en engendrer un autre probablement ou éventuellement meilleur)
“Au lieu de faire que ce qui fût juste fût fort, on a fait que ce qui fût fort fût juste.” (Blaise Pascal).
Hors ligne
#283 Le 02/01/2011, à 17:30
- Levi59
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Techniquement, quand on dit la fin du monde, on entend la fin de notre monde et en faisant partie nous aussi, c'est également notre fin...
Ce qu'il y a après, si il n'y a plus personne pour en profiter...
Hors ligne
#284 Le 02/01/2011, à 19:45
- uboops
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
LOL, oui mais la vie n'est pas que technique ...
“Au lieu de faire que ce qui fût juste fût fort, on a fait que ce qui fût fort fût juste.” (Blaise Pascal).
Hors ligne
#285 Le 03/01/2011, à 17:42
- remi82
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Bonne annnée à tous, et à Multisystèm 
Et biensur à Frafa
Le site est HS ?
Hors ligne
#286 Le 03/01/2011, à 17:58
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@remi82
Bonjour,
en ce moment non,
mais un article récent génère un peu trop de trafic sur liveusb.info en ce moment,
je viens de le booster un peu via flexiserveur de Gandi ....
Article en question: http://www.howtogeek.com/howto/39747/ho … ash-drive/
Dernière modification par frafa (Le 03/01/2011, à 18:01)
Hors ligne
#287 Le 03/01/2011, à 21:58
- andso
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
yep,
bon futur pour MS 
Tu penses au passage de flambeau éventuel? (pour moultes raisons). Perso, j' ai mis le nez dans tes scripts, mais pas le niveau et le...temps (non, la passion).
Files moi ton adresse par mail, et je t' envoie un mini don en retour (je suis pauvre, mais un peu + large en ce moment).
IMPORTANT: Booster votre (X et K)ubuntu: http://forum.ubuntu-fr.org/viewtopic.php?id=241092 (pfou!...)
à essayer, et... demain debian? http://fr.wikipedia.org/wiki/Demain_les_chiens
demain les biens? mes biens biens? t' exagére ... la banque!
Hors ligne
#288 Le 04/01/2011, à 01:27
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@andso
Merci
http://liveusb.info/dotclear/index.php?category/Soutien
record des visites journalières battu ce jour !
03 Jan 2011 4680 Visiteurs différents sur liveusb.info
bon ce n'est pas distrowatch, mais ce n'est pas mal pour un soft linux
Dernière modification par frafa (Le 04/01/2011, à 01:32)
Hors ligne
#289 Le 04/01/2011, à 09:20
- remi82
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Bonjour Frafa,
Effectivement, il devait y avoir une surcharge.
Encore mes meilleurs voeux pour cette année 2011
Hors ligne
#290 Le 04/01/2011, à 18:01
- eserpios
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
salut, frafra,
je viens de faire la mise à jour de multiboot à multisystem, mais il ya une un problème du à une mauvaise connexion à internet, j'ai donc supprimer manuellement et réinstaller via le script proposer au post #1 mais depuis je n'arrive plus à accéder à mes supports amovible, une clef usb de 1,1 GB(sdb1) et un disque dur externe 2,5 pouces de 40 GB(sdc1).
j'obtiens le message suivant quant j'essaye de les lancer avec multisystem erreur: le volume suivant est indisponible : /dev/sdb1 ou sdc1 suivant le disque evidement.
lsusb me détecte bien les disques, je peut les monter sans problèmes et ils sont bien formaté en fat32
Je comprend pas!, j'aurais bien besoin d'un coup de main.
Meilleurs voeux!
Ubuntu 24.04
PENSEZ À PASSER EN [RÉSOLU]
Hors ligne
#291 Le 04/01/2011, à 18:10
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@eserpios
Bonjour,
Pour reinstaller multisystem passe par ton gestionnaire de paquets,
synaptic sous Ubuntu.
pour ton souci de montage auto des volumes amovibles,
commence déjà par redemarrer, et reteste ...
si le problème persiste fait voir le retour de la commande:
dmesgapres avoir debranché/rebranché le volume amovible.
et fait aussi passer le version de Ubuntu que tu utilise.
Dernière modification par frafa (Le 04/01/2011, à 18:10)
Hors ligne
#292 Le 04/01/2011, à 18:30
- eserpios
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@frafra
j'ai reinstaller via synaptic pas de changement, redemarrage, pas de changement, dmesg donne
00 SRC=189.59.135.139 DST=78.250.148.151 LEN=78 TOS=0x00 PREC=0x00 TTL=111 ID=9726 PROTO=UDP SPT=1025 DPT=137 LEN=58
[14966.677860] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=65.54.165.175 DST=78.250.148.151 LEN=40 TOS=0x00 PREC=0x00 TTL=118 ID=29869 DF PROTO=TCP SPT=443 DPT=48046 WINDOW=65026 RES=0x00 ACK URGP=0
[15281.260335] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=62.34.94.130 DST=78.250.148.151 LEN=52 TOS=0x00 PREC=0x00 TTL=118 ID=12045 DF PROTO=TCP SPT=56180 DPT=48336 WINDOW=8192 RES=0x00 SYN URGP=0
[15284.270975] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=62.34.94.130 DST=78.250.148.151 LEN=52 TOS=0x00 PREC=0x00 TTL=118 ID=12330 DF PROTO=TCP SPT=56180 DPT=48336 WINDOW=8192 RES=0x00 SYN URGP=0
[15290.040922] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=62.34.94.130 DST=78.250.148.151 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=12844 DF PROTO=TCP SPT=56180 DPT=48336 WINDOW=65535 RES=0x00 SYN URGP=0
[15367.212628] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=62.34.94.130 DST=78.250.148.151 LEN=93 TOS=0x00 PREC=0x00 TTL=118 ID=20315 PROTO=UDP SPT=56398 DPT=48336 LEN=73
[15514.570598] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.148.151 LEN=40 TOS=0x00 PREC=0x00 TTL=112 ID=256 DF PROTO=TCP SPT=12200 DPT=8085 WINDOW=8192 RES=0x00 SYN URGP=0
[15515.284751] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.148.151 LEN=40 TOS=0x00 PREC=0x00 TTL=112 ID=256 DF PROTO=TCP SPT=12200 DPT=8090 WINDOW=8192 RES=0x00 SYN URGP=0
[15841.684330] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=218.108.73.41 DST=78.250.148.151 LEN=44 TOS=0x00 PREC=0x00 TTL=95 ID=1097 PROTO=TCP SPT=6000 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0
[15977.942002] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=89.138.210.5 DST=78.250.148.151 LEN=78 TOS=0x00 PREC=0x00 TTL=113 ID=5259 PROTO=UDP SPT=1050 DPT=137 LEN=58
[16264.228821] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=93.186.176.224 DST=78.250.148.151 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=14196 DF PROTO=TCP SPT=51704 DPT=6891 WINDOW=5840 RES=0x00 SYN URGP=0
[16330.597762] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.148.151 LEN=40 TOS=0x00 PREC=0x00 TTL=112 ID=256 DF PROTO=TCP SPT=12200 DPT=27977 WINDOW=8192 RES=0x00 SYN URGP=0
[16330.772427] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.148.151 LEN=40 TOS=0x00 PREC=0x00 TTL=112 ID=256 DF PROTO=TCP SPT=12200 DPT=8085 WINDOW=8192 RES=0x00 SYN URGP=0
[16331.230618] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.148.151 LEN=40 TOS=0x00 PREC=0x00 TTL=112 ID=256 DF PROTO=TCP SPT=12200 DPT=8090 WINDOW=8192 RES=0x00 SYN URGP=0
[16461.875245] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=85.170.21.214 DST=78.250.148.151 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=22256 DF PROTO=TCP SPT=3584 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
[16464.836409] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=85.170.21.214 DST=78.250.148.151 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=22311 DF PROTO=TCP SPT=3584 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
[16878.505033] No probe response from AP 82:53:49:f0:8b:e2 after 500ms, disconnecting.
[16878.854715] Registered led device: iwl-phy0::radio
[16878.854744] Registered led device: iwl-phy0::assoc
[16878.854765] Registered led device: iwl-phy0::RX
[16878.854786] Registered led device: iwl-phy0::TX
[16878.870060] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16879.305970] tg3 0000:08:00.0: PME# enabled
[16879.306091] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[16879.327448] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[16879.327501] tg3 0000:08:00.0: PME# disabled
[16879.340307] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[16879.509757] ADDRCONF(NETDEV_UP): eth0: link is not ready
[16984.267772] Registered led device: iwl-phy0::radio
[16984.268633] Registered led device: iwl-phy0::assoc
[16984.269481] Registered led device: iwl-phy0::RX
[16984.270214] Registered led device: iwl-phy0::TX
[16984.278598] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16984.716607] tg3 0000:08:00.0: PME# enabled
[16984.716727] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[16984.745230] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[16984.745280] tg3 0000:08:00.0: PME# disabled
[16984.760282] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[16984.928538] ADDRCONF(NETDEV_UP): eth0: link is not ready
[16985.230423] Registered led device: iwl-phy0::radio
[16985.231292] Registered led device: iwl-phy0::assoc
[16985.232040] Registered led device: iwl-phy0::RX
[16985.232784] Registered led device: iwl-phy0::TX
[16985.259313] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16987.329081] type=1503 audit(1294158893.549:161): operation="open" pid=9382 parent=9360 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17014.968389] Registered led device: iwl-phy0::radio
[17014.972116] Registered led device: iwl-phy0::assoc
[17014.973818] Registered led device: iwl-phy0::RX
[17014.975452] Registered led device: iwl-phy0::TX
[17014.990949] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17014.991019] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17014.994223] wlan0: direct probe responded
[17014.994229] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17014.995964] wlan0: authenticated
[17014.995989] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17015.007876] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17015.007880] wlan0: associated
[17015.009415] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17015.428598] tg3 0000:08:00.0: PME# enabled
[17015.428719] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17015.451696] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17015.451749] tg3 0000:08:00.0: PME# disabled
[17015.464291] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17015.634570] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17015.668091] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17015.914450] Registered led device: iwl-phy0::radio
[17015.918313] Registered led device: iwl-phy0::assoc
[17015.922222] Registered led device: iwl-phy0::RX
[17015.925295] Registered led device: iwl-phy0::TX
[17015.933802] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17018.013725] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17018.024973] wlan0: direct probe responded
[17018.024979] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17018.026830] wlan0: authenticated
[17018.026856] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17018.035268] type=1503 audit(1294158924.254:162): operation="open" pid=9469 parent=9447 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17018.043535] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17018.043540] wlan0: associated
[17018.045415] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17028.148064] wlan0: no IPv6 routers present
[17052.425065] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17052.547100] Registered led device: iwl-phy0::radio
[17052.548284] Registered led device: iwl-phy0::assoc
[17052.548992] Registered led device: iwl-phy0::RX
[17052.549670] Registered led device: iwl-phy0::TX
[17052.569305] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17053.004849] tg3 0000:08:00.0: PME# enabled
[17053.004931] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17053.026050] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17053.026101] tg3 0000:08:00.0: PME# disabled
[17053.040370] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17053.216501] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17053.473783] Registered led device: iwl-phy0::radio
[17053.474548] Registered led device: iwl-phy0::assoc
[17053.475221] Registered led device: iwl-phy0::RX
[17053.475889] Registered led device: iwl-phy0::TX
[17053.490035] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17055.559805] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17055.563146] wlan0: direct probe responded
[17055.563153] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17055.565058] wlan0: authenticated
[17055.565085] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17055.567513] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17055.567518] wlan0: associated
[17055.578885] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17055.579756] type=1503 audit(1294158961.798:163): operation="open" pid=9567 parent=9547 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17066.405206] wlan0: no IPv6 routers present
[17110.605060] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17110.778297] Registered led device: iwl-phy0::radio
[17110.782658] Registered led device: iwl-phy0::assoc
[17110.787532] Registered led device: iwl-phy0::RX
[17110.789527] Registered led device: iwl-phy0::TX
[17110.816417] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17111.261589] tg3 0000:08:00.0: PME# enabled
[17111.261677] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17111.282323] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17111.282374] tg3 0000:08:00.0: PME# disabled
[17111.297291] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17111.469728] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17111.732654] Registered led device: iwl-phy0::radio
[17111.732679] Registered led device: iwl-phy0::assoc
[17111.732739] Registered led device: iwl-phy0::RX
[17111.732758] Registered led device: iwl-phy0::TX
[17111.738065] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17113.826651] type=1503 audit(1294159020.046:164): operation="open" pid=9673 parent=9651 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17164.254352] Registered led device: iwl-phy0::radio
[17164.258504] Registered led device: iwl-phy0::assoc
[17164.258629] Registered led device: iwl-phy0::RX
[17164.264259] Registered led device: iwl-phy0::TX
[17164.285318] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17164.326975] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17164.330502] wlan0: direct probe responded
[17164.330509] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17164.332660] wlan0: authenticated
[17164.332684] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17164.337376] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17164.337381] wlan0: associated
[17164.338880] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17164.732590] tg3 0000:08:00.0: PME# enabled
[17164.732677] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17164.753550] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17164.753600] tg3 0000:08:00.0: PME# disabled
[17164.768308] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17164.939743] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17164.996042] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17165.182924] Registered led device: iwl-phy0::radio
[17165.183208] Registered led device: iwl-phy0::assoc
[17165.183463] Registered led device: iwl-phy0::RX
[17165.183764] Registered led device: iwl-phy0::TX
[17165.208433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17167.263434] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17167.279565] wlan0: direct probe responded
[17167.279572] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17167.281440] wlan0: authenticated
[17167.281466] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17167.283983] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17167.283987] wlan0: associated
[17167.285392] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17167.287203] type=1503 audit(1294159073.505:165): operation="open" pid=9777 parent=9757 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17177.764019] wlan0: no IPv6 routers present
[17225.568181] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17225.705137] Registered led device: iwl-phy0::radio
[17225.705433] Registered led device: iwl-phy0::assoc
[17225.705504] Registered led device: iwl-phy0::RX
[17225.705750] Registered led device: iwl-phy0::TX
[17225.717253] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17226.148588] tg3 0000:08:00.0: PME# enabled
[17226.148687] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17226.172984] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17226.173098] tg3 0000:08:00.0: PME# disabled
[17226.189270] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17226.361042] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17226.691285] Registered led device: iwl-phy0::radio
[17226.692899] Registered led device: iwl-phy0::assoc
[17226.693715] Registered led device: iwl-phy0::RX
[17226.694412] Registered led device: iwl-phy0::TX
[17226.717646] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17228.798963] type=1503 audit(1294159135.018:166): operation="open" pid=9893 parent=9872 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17324.437634] Registered led device: iwl-phy0::radio
[17324.443767] Registered led device: iwl-phy0::assoc
[17324.448696] Registered led device: iwl-phy0::RX
[17324.450535] Registered led device: iwl-phy0::TX
[17324.464906] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17324.501553] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17324.513064] wlan0: direct probe responded
[17324.513070] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17324.515903] wlan0: authenticated
[17324.515929] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17324.518780] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17324.518785] wlan0: associated
[17324.523357] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17324.909586] tg3 0000:08:00.0: PME# enabled
[17324.909682] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17324.929375] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17324.929425] tg3 0000:08:00.0: PME# disabled
[17324.948702] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17325.122863] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17325.160063] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17325.412189] Registered led device: iwl-phy0::radio
[17325.414814] Registered led device: iwl-phy0::assoc
[17325.415168] Registered led device: iwl-phy0::RX
[17325.415417] Registered led device: iwl-phy0::TX
[17325.433845] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17327.533067] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17327.536939] wlan0: direct probe responded
[17327.536945] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17327.539251] wlan0: authenticated
[17327.539279] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17327.543534] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17327.543539] wlan0: associated
[17327.548904] type=1503 audit(1294159233.769:167): operation="open" pid=10023 parent=10003 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17327.557643] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17338.188037] wlan0: no IPv6 routers present
[17451.984058] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17452.114296] Registered led device: iwl-phy0::radio
[17452.114646] Registered led device: iwl-phy0::assoc
[17452.114899] Registered led device: iwl-phy0::RX
[17452.115139] Registered led device: iwl-phy0::TX
[17452.124780] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17452.572599] tg3 0000:08:00.0: PME# enabled
[17452.572700] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17452.595494] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17452.595545] tg3 0000:08:00.0: PME# disabled
[17452.608381] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17452.777007] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17452.983688] Registered led device: iwl-phy0::radio
[17452.983761] Registered led device: iwl-phy0::assoc
[17452.985122] Registered led device: iwl-phy0::RX
[17452.985209] Registered led device: iwl-phy0::TX
[17453.012194] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17455.094323] type=1503 audit(1294159361.313:168): operation="open" pid=10169 parent=10148 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17584.618079] Registered led device: iwl-phy0::radio
[17584.619266] Registered led device: iwl-phy0::assoc
[17584.619969] Registered led device: iwl-phy0::RX
[17584.620650] Registered led device: iwl-phy0::TX
[17584.634268] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17584.680467] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17584.683636] wlan0: direct probe responded
[17584.683641] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17584.685552] wlan0: authenticated
[17584.685581] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17584.689778] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17584.689782] wlan0: associated
[17584.693408] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17585.068594] tg3 0000:08:00.0: PME# enabled
[17585.068717] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17585.101637] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17585.101691] tg3 0000:08:00.0: PME# disabled
[17585.116297] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17585.285095] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17585.336056] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17585.650178] Registered led device: iwl-phy0::radio
[17585.650204] Registered led device: iwl-phy0::assoc
[17585.650268] Registered led device: iwl-phy0::RX
[17585.650289] Registered led device: iwl-phy0::TX
[17585.665831] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17587.738941] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17587.742181] wlan0: direct probe responded
[17587.742189] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17587.754457] wlan0: authenticated
[17587.754493] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17587.761839] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17587.761844] wlan0: associated
[17587.764688] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17587.766377] type=1503 audit(1294159493.985:169): operation="open" pid=10348 parent=10327 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17598.201017] wlan0: no IPv6 routers present
[17766.137081] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[17766.286907] Registered led device: iwl-phy0::radio
[17766.287643] Registered led device: iwl-phy0::assoc
[17766.288315] Registered led device: iwl-phy0::RX
[17766.288978] Registered led device: iwl-phy0::TX
[17766.306135] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17766.788613] tg3 0000:08:00.0: PME# enabled
[17766.788936] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17766.810939] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17766.810996] tg3 0000:08:00.0: PME# disabled
[17766.829418] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17767.003238] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17767.369529] Registered led device: iwl-phy0::radio
[17767.370238] Registered led device: iwl-phy0::assoc
[17767.370279] Registered led device: iwl-phy0::RX
[17767.370309] Registered led device: iwl-phy0::TX
[17767.388128] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17769.531493] type=1503 audit(1294159675.749:170): operation="open" pid=10508 parent=10486 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[17842.385363] Registered led device: iwl-phy0::radio
[17842.390322] Registered led device: iwl-phy0::assoc
[17842.394816] Registered led device: iwl-phy0::RX
[17842.397288] Registered led device: iwl-phy0::TX
[17842.420806] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17842.456850] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[17842.763114] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 2)
[17842.772095] wlan0: direct probe responded
[17842.772108] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[17842.774316] wlan0: authenticated
[17842.925749] tg3 0000:08:00.0: PME# enabled
[17842.926035] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[17842.942254] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[17842.947483] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[17842.947499] wlan0: associated
[17842.950321] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17842.962050] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[17842.962109] tg3 0000:08:00.0: PME# disabled
[17842.976615] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[17843.156232] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17853.864041] wlan0: no IPv6 routers present
[18291.411074] wlan0: deauthenticating from 82:53:49:f0:8b:e2 by local choice (reason=3)
[18291.546932] Registered led device: iwl-phy0::radio
[18291.549997] Registered led device: iwl-phy0::assoc
[18291.550854] Registered led device: iwl-phy0::RX
[18291.551563] Registered led device: iwl-phy0::TX
[18291.558185] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18292.002561] tg3 0000:08:00.0: PME# enabled
[18292.002615] tg3 0000:08:00.0: wake-up capability enabled by ACPI
[18292.021812] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[18292.021862] tg3 0000:08:00.0: PME# disabled
[18292.037276] tg3 0000:08:00.0: irq 29 for MSI/MSI-X
[18292.209511] ADDRCONF(NETDEV_UP): eth0: link is not ready
[18292.425204] Registered led device: iwl-phy0::radio
[18292.427365] Registered led device: iwl-phy0::assoc
[18292.428187] Registered led device: iwl-phy0::RX
[18292.428874] Registered led device: iwl-phy0::TX
[18292.446096] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18294.616644] wlan0: direct probe to AP 82:53:49:f0:8b:e2 (try 1)
[18294.619963] wlan0: direct probe responded
[18294.619969] wlan0: authenticate with AP 82:53:49:f0:8b:e2 (try 1)
[18294.622474] wlan0: authenticated
[18294.622499] wlan0: associate with AP 82:53:49:f0:8b:e2 (try 1)
[18294.625620] wlan0: RX AssocResp from 82:53:49:f0:8b:e2 (capab=0x401 status=0 aid=1)
[18294.625624] wlan0: associated
[18294.629026] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[18294.642128] type=1503 audit(1294160200.862:171): operation="open" pid=11090 parent=11070 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[18305.328028] wlan0: no IPv6 routers present
[18401.932602] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=78.250.255.253 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=67 DPT=68 LEN=308
[18468.749448] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=93.186.176.224 DST=78.250.147.250 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=28421 DF PROTO=TCP SPT=40985 DPT=6891 WINDOW=5840 RES=0x00 SYN URGP=0
[18559.664438] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=58375 DF PROTO=TCP SPT=1502 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[18562.536667] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=58709 DF PROTO=TCP SPT=1502 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[18568.572104] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=59494 DF PROTO=TCP SPT=1502 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[18764.178273] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.147.250 LEN=40 TOS=0x00 PREC=0x00 TTL=113 ID=256 DF PROTO=TCP SPT=12200 DPT=27977 WINDOW=8192 RES=0x00 SYN URGP=0
[18764.465026] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.147.250 LEN=40 TOS=0x00 PREC=0x00 TTL=113 ID=256 DF PROTO=TCP SPT=12200 DPT=9000 WINDOW=8192 RES=0x00 SYN URGP=0
[18764.659091] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.147.250 LEN=40 TOS=0x00 PREC=0x00 TTL=113 ID=256 DF PROTO=TCP SPT=12200 DPT=8090 WINDOW=8192 RES=0x00 SYN URGP=0
[19247.852369] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=12648 DF PROTO=TCP SPT=3186 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[19250.829956] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=13000 DF PROTO=TCP SPT=3186 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[19252.420378] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=79.116.132.152 DST=78.250.147.250 LEN=95 TOS=0x00 PREC=0x00 TTL=120 ID=37821 PROTO=UDP SPT=34082 DPT=64838 LEN=75
[19256.865372] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=13756 DF PROTO=TCP SPT=3186 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[19621.850902] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=222.186.13.212 DST=78.250.147.250 LEN=40 TOS=0x00 PREC=0x00 TTL=113 ID=256 DF PROTO=TCP SPT=12200 DPT=9000 WINDOW=8192 RES=0x00 SYN URGP=0
[19642.986589] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=61.160.212.242 DST=78.250.147.250 LEN=40 TOS=0x00 PREC=0x00 TTL=238 ID=1348 DF PROTO=TCP SPT=23 DPT=8085 WINDOW=65535 RES=0x00 SYN URGP=0
[19832.300034] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=24.60.158.101 DST=78.250.147.250 LEN=60 TOS=0x00 PREC=0x00 TTL=48 ID=60993 DF PROTO=TCP SPT=59586 DPT=64838 WINDOW=5840 RES=0x00 SYN URGP=0
[19832.455139] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=24.60.158.101 DST=78.250.147.250 LEN=60 TOS=0x00 PREC=0x00 TTL=48 ID=15299 DF PROTO=TCP SPT=59588 DPT=64838 WINDOW=5840 RES=0x00 SYN URGP=0
[19925.918578] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=31294 DF PROTO=TCP SPT=1028 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[19928.861972] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=31602 DF PROTO=TCP SPT=1028 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[19934.792361] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=95.182.48.130 DST=78.250.147.250 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=32376 DF PROTO=TCP SPT=1028 DPT=11125 WINDOW=64240 RES=0x00 SYN URGP=0
[19975.909882] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=93.186.176.224 DST=78.250.147.250 LEN=60 TOS=0x00 PREC=0x00 TTL=55 ID=50503 DF PROTO=TCP SPT=52006 DPT=6891 WINDOW=5840 RES=0x00 SYN URGP=0
[20001.957864] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=85.198.157.57 DST=78.250.147.250 LEN=95 TOS=0x00 PREC=0x00 TTL=117 ID=5451 PROTO=UDP SPT=37916 DPT=11125 LEN=75
[20011.088324] usb 2-1: USB disconnect, address 6
[20013.193207] usb 2-1: new high speed USB device using ehci_hcd and address 12
[20013.325838] usb 2-1: configuration #1 chosen from 1 choice
[20013.329276] scsi11 : SCSI emulation for USB Mass Storage devices
[20013.329497] usb-storage: device found at 12
[20013.329501] usb-storage: waiting for device to settle before scanning
[20018.328290] usb-storage: device scan complete
[20018.328849] scsi 11:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
[20018.329859] sd 11:0:0:0: Attached scsi generic sg2 type 0
[20018.330943] sd 11:0:0:0: [sdb] 2065920 512-byte logical blocks: (1.05 GB/1008 MiB)
[20018.331716] sd 11:0:0:0: [sdb] Write Protect is off
[20018.331722] sd 11:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[20018.331727] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[20018.339543] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[20018.339552] sdb: sdb1
[20018.344412] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[20018.344420] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[20116.006697] Inbound IN=wlan0 OUT= MAC=00:1c:bf:60:21:57:00:07:cb:00:01:00:08:00 SRC=218.39.248.122 DST=78.250.147.250 LEN=95 TOS=0x00 PREC=0x00 TTL=118 ID=13820 PROTO=UDP SPT=54325 DPT=64838 LEN=75
[20117.190372] usb 2-1: USB disconnect, address 12
[20118.980086] usb 2-1: new high speed USB device using ehci_hcd and address 13
[20119.114141] usb 2-1: configuration #1 chosen from 1 choice
[20119.115653] scsi12 : SCSI emulation for USB Mass Storage devices
[20119.116279] usb-storage: device found at 13
[20119.116284] usb-storage: waiting for device to settle before scanning
[20124.116314] usb-storage: device scan complete
[20124.116777] scsi 12:0:0:0: Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2
[20124.119427] sd 12:0:0:0: Attached scsi generic sg2 type 0
[20124.120242] sd 12:0:0:0: [sdb] 2065920 512-byte logical blocks: (1.05 GB/1008 MiB)
[20124.120723] sd 12:0:0:0: [sdb] Write Protect is off
[20124.120727] sd 12:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[20124.120730] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[20124.122491] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[20124.122500] sdb: sdb1
[20124.126370] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[20124.126379] sd 12:0:0:0: [sdb] Attached SCSI removable diskDernière modification par eserpios (Le 04/01/2011, à 18:30)
Ubuntu 24.04
PENSEZ À PASSER EN [RÉSOLU]
Hors ligne
#293 Le 04/01/2011, à 18:39
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@eserpios
re,
le message "le volume suivant est indisponible"
surviens normalement si tu as débranché le volume amovible sélectionné dans multisystem.
ou si son identifiant /dev/sd? à changé,
dans ce cas quitte et relance multisystem ...
si pas ce cas explique a quel moment ce message surviens,
i est imperatif de ne pas debrancher un volume selectionné dans multisystem
sous peine de voir ce message apparaitre...
Hors ligne
#294 Le 04/01/2011, à 18:56
- eserpios
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@ frafra,
je n'ai pas debrancher la clef et je vois pas pourquoi son identifiant aurais changé, le message d'erreur survient juste après avoir valder la selection de ma clef dans la première page de multisystem (celle ou il ya l'avertissement en rouge pour grub2)
Dernière modification par eserpios (Le 04/01/2011, à 18:56)
Ubuntu 24.04
PENSEZ À PASSER EN [RÉSOLU]
Hors ligne
#295 Le 04/01/2011, à 19:32
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@eserpios
fait voir le retour de
ls /mediaavec tes volumes amovibles branchés
Dernière modification par frafa (Le 04/01/2011, à 19:34)
Hors ligne
#296 Le 04/01/2011, à 20:22
- eserpios
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@ frafra
ls /media donne:
eserpios@eserpios-laptop:~$ ls /media
cdrom cdrom0 CLESERPIOS LACIE 300ma clef étant CLESERPIOS
mais je pense pas que le problème vienne de mes volumes amovibles, vu que je peut y accéder, copier-coller des fichiers
Dernière modification par eserpios (Le 04/01/2011, à 20:24)
Ubuntu 24.04
PENSEZ À PASSER EN [RÉSOLU]
Hors ligne
#297 Le 04/01/2011, à 22:01
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@eserpios
colle le code ci-dessous en entier d'1 coup dans un terminal et fait passer le retour stp.
for i in $(hal-find-by-property --key info.category --string volume); do
echo device:$(hal-get-property --udi $i --key block.device)
echo point de montage:$(hal-get-property --udi $i --key volume.mount_point)
echo
doneDernière modification par frafa (Le 04/01/2011, à 22:01)
Hors ligne
#298 Le 04/01/2011, à 22:27
- eserpios
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@ frafra
eserpios@eserpios-laptop:~$ for i in $(hal-find-by-property --key info.category --string volume); do
> echo device:$(hal-get-property --udi $i --key block.device)
> echo point de montage:$(hal-get-property --udi $i --key volume.mount_point)
> echo
> done
device:/dev/sdd1
point de montage:
device:/dev/sdd1
point de montage:/media/ESERPIOSDDE
device:/dev/sdb1
point de montage:
device:/dev/sdb1
point de montage:/media/CLESERPIOS
device:/dev/sdc1
point de montage:
device:/dev/sdc1
point de montage:/media/LACIE 300
device:/dev/sda5
point de montage:
device:/dev/sda2
point de montage:
device:/dev/sda1
point de montage:/Ubuntu 24.04
PENSEZ À PASSER EN [RÉSOLU]
Hors ligne
#299 Le 04/01/2011, à 22:43
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@eserpios
il y a un souci avec hal, il voit tous tes volumes amovibles en double !!!
et ce n'est pas normal, c'est a cause de ca que multisystem ne comprend pas le retour de hal
car le premier retour est sans le point de montage, bizarre ...
reinstalle hal et reteste ...
device:/dev/sdd1
point de montage:device:/dev/sdd1
point de montage:/media/ESERPIOSDDEdevice:/dev/sdb1
point de montage:device:/dev/sdb1
point de montage:/media/CLESERPIOS
Hors ligne
#300 Le 04/01/2011, à 22:53
- eserpios
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@ frafra
hal réinstallé via synaptic, aucun changement
Ubuntu 24.04
PENSEZ À PASSER EN [RÉSOLU]
Hors ligne