#1326 Le 23/10/2011, à 15:22
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@SMO
Re,
Vouep c'est bien de faire évoluer ubukey 
moi pas vraiment le temps de faire évoluer modcustom ...
pas bossé sur osx,
tu cherche a faire quoi ?
ajouter une iso genre iATKOS dans multisystem,
ou booter une clé usb multisystem sur un mac ?
si second cas, Plop à pas mal évolué il me semble sur le support des mac avec ma version 5.0.13
les derniers test que j'avait fait sur le mac d'une copine en bootant sur cdrom plop + clé multisystem
fonctionnait a condition de connecter un clavier en USB...
HackerLiberty à tripaouillé la dedans, il te répondra surement mieux que moi à ce sujet si premier cas ...
Hors ligne
#1327 Le 25/10/2011, à 04:57
- charlybozo
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Bonjour Frafa,
Suite au passage d'Ubuntu a Unity, j'ai voulu me servir de Multisystem pour essayer d'autres versions d'Ubuntu (Lubuntu et Kubuntu).
Donc, j'ai bien installe les dépôts, j'ai réussi a installer Multisystem sans problème, puis j'ai fait un glisser déposer de mes iso sur ma clé.
Et la c'est le drame, je n'ai jamais réussi a booter sur la clé (mon BIOS est bien configure), et ma clé n'est plus reconnu.... Quand je la branche, la diode sur la cle s'allume, mais elle ne se monte pas, Ubuntu ne la voie pas du tout. Un lsusb ne la trouve pas....
En désespoir de cause, je l'ai aussi essayer sous WinXP, elle n'est pas détectée non plus.
J'ai essayer le petit logiciel libre testdisk, qui ne la voie pas non plus....
S'il te plait, dis moi que je n'ai pas flingué ma clé.... 
Merci
Desole pour les accents, mais j'utilise un clavier Qwerty...
Hors ligne
#1328 Le 25/10/2011, à 16:57
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@charlybozo
Bonjour,
Il y a apparement des bug sous Oneiric liés à des règles udev
dans le système de détection des volumes amovibles ...
démarre sous natty, eventuellement en livecd si tu n'a rien d'autre sous la main ...
et verifie si tu as les mêmes souci, si souci est le même,
debreanche/rebranche ta clé USB, attend que elle ne clignotte plus,
et fait passer le retour de la commande: dmesg
a tout hasard, c'est quoi l'iso que tu as droppée ?
pas un truc win avec un virus ?
Hors ligne
#1329 Le 26/10/2011, à 01:20
- charlybozo
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Salut Frafa,
OK, je vais télécharger un live cd et faire le test.
J'ai télécharger mon iso sur le site officiel, je ne pense pas qu'il y ait de problème avec ça...
Desole pour les accents, mais j'utilise un clavier Qwerty...
Hors ligne
#1330 Le 26/10/2011, à 05:38
- charlybozo
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Salut,
Quand je branche, ma clé usb, elle ne clignote pas, elle s'allume directement.
Je suis sous Natty en liveCD, je branche ma clé et il ne se passe toujours rien... Ubuntu ne la voit pas (rien dans le moniteur systeme, rien dans Gparted)
Voila le résultat de la commande dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-28-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 (Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f44d400 (usable)
[ 0.000000] BIOS-e820: 000000007f44f400 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7f44d max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009bc00 (usable)
[ 0.000000] modified: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f44d400 (usable)
[ 0.000000] modified: 000000007f44f400 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 7eb17000 - 7f41faa4
[ 0.000000] Allocated new RAMDISK: 008e5000 - 011edaa4
[ 0.000000] Move RAMDISK from 000000007eb17000 - 000000007f41faa3 to 008e5000 - 011edaa3
[ 0.000000] ACPI: RSDP 000fb9c0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 7f451e00 0006C (v01 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: FACP 7f451c9c 000F4 (v04 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: DSDT 7f452400 06A2B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 7f460c00 00040
[ 0.000000] ACPI: HPET 7f451f00 00038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: ____ 7f460400 00030 (v01 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: APIC 7f452000 00068 (v01 DELL M09 27D9020D ASL 00000047)
[ 0.000000] ACPI: ASF! 7f451c00 0006A (v32 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: MCFG 7f451fc0 0003E (v16 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: TCPA 7f452300 00032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: SLIC 7f45209c 00176 (v01 DELL M09 27D9020D ASL 00000061)
[ 0.000000] ACPI: SSDT 7f45032d 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1148MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008e0ed8] TEXT DATA BSS ==> [0000100000 - 00008e0ed8]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
[ 0.000000] #5 [00008e1000 - 00008e4184] BRK ==> [00008e1000 - 00008e4184]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008e5000 - 00011edaa4] NEW RAMDISK ==> [00008e5000 - 00011edaa4]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f44d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0007f44d
[ 0.000000] On node 0 totalpages: 521188
[ 0.000000] free_area_init_node: node 0, pgdat c079c8c0, node_mem_map c11ef000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3959 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2297 pages used for memmap
[ 0.000000] HighMem zone: 291670 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u2097152
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517115
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr console-setup/layoutcode?=fr console-setup/variantcode?=oss maybe-ubiquity
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10425860 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f44d)
[ 0.000000] Memory: 2038952k/2085172k available (4685k kernel code, 44824k reserved, 2125k data, 660k init, 1175868k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a7000 - 0xc084c000 ( 660 kB)
[ 0.000000] .data : 0xc05936e7 - 0xc07a6e88 (2125 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05936e7 (4685 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.546 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.09 BogoMIPS (lpj=9574184)
[ 0.004019] Security Framework initialized
[ 0.004036] AppArmor: AppArmor initialized
[ 0.004042] Mount-cache hash table entries: 512
[ 0.004147] Initializing cgroup subsys ns
[ 0.004151] Initializing cgroup subsys cpuacct
[ 0.004154] Initializing cgroup subsys memory
[ 0.004161] Initializing cgroup subsys devices
[ 0.004163] Initializing cgroup subsys freezer
[ 0.004165] Initializing cgroup subsys net_cls
[ 0.004183] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004185] CPU: L2 cache: 3072K
[ 0.004188] CPU: Physical Processor ID: 0
[ 0.004189] CPU: Processor Core ID: 0
[ 0.004192] mce: CPU supports 6 MCE banks
[ 0.004200] CPU0: Thermal monitoring enabled (TM2)
[ 0.004203] using mwait in idle threads.
[ 0.004209] Performance Events: Core2 events, Intel PMU driver.
[ 0.004215] ... version: 2
[ 0.004217] ... bit width: 40
[ 0.004218] ... generic registers: 2
[ 0.004220] ... value mask: 000000ffffffffff
[ 0.004221] ... max period: 000000007fffffff
[ 0.004223] ... fixed-purpose events: 3
[ 0.004224] ... event mask: 0000000700000003
[ 0.004229] Checking 'hlt' instruction... OK.
[ 0.022453] ACPI: Core revision 20090903
[ 0.032009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.032012] ftrace: allocating 21796 entries in 43 pages
[ 0.036047] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078411] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164051] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
[ 0.164058] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168016] Brought up 2 CPUs
[ 0.168019] Total of 2 processors activated (9575.05 BogoMIPS).
[ 0.168598] CPU0 attaching sched-domain:
[ 0.168601] domain 0: span 0-1 level MC
[ 0.168603] groups: 0 1
[ 0.168608] CPU1 attaching sched-domain:
[ 0.168610] domain 0: span 0-1 level MC
[ 0.168612] groups: 1 0
[ 0.168663] devtmpfs: initialized
[ 0.168663] regulator: core version 0.5
[ 0.168663] Time: 12:22:20 Date: 10/26/11
[ 0.168663] NET: Registered protocol family 16
[ 0.168663] Trying to unpack rootfs image as initramfs...
[ 0.168663] EISA bus registered
[ 0.168663] ACPI: bus type pci registered
[ 0.168663] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.168663] PCI: MCFG area at f8000000 reserved in E820
[ 0.168663] PCI: Using MMCONFIG for extended config space
[ 0.168663] PCI: Using configuration type 1 for base access
[ 0.572202] bio: create slab <bio-0> at 0
[ 0.572871] ACPI: EC: Look up EC in DSDT
[ 0.573067] ACPI: BIOS _OSI(Linux) query ignored
[ 0.637835] ACPI: Interpreter enabled
[ 0.637835] ACPI: (supports S0 S3 S4 S5)
[ 0.637835] ACPI: Using IOAPIC for interrupt routing
[ 0.748601] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.751487] ACPI: No dock devices found.
[ 0.770666] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.770769] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.770772] pci 0000:00:01.0: PME# disabled
[ 0.770861] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6fe0000-0xf6ffffff]
[ 0.770869] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6fdb000-0xf6fdbfff]
[ 0.770877] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
[ 0.770932] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.770936] pci 0000:00:19.0: PME# disabled
[ 0.771001] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.771093] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.771184] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.771275] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.771342] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.771347] pci 0000:00:1a.7: PME# disabled
[ 0.771402] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6fdc000-0xf6fdffff]
[ 0.771461] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.771466] pci 0000:00:1b.0: PME# disabled
[ 0.771555] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.771560] pci 0000:00:1c.0: PME# disabled
[ 0.771652] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.771656] pci 0000:00:1c.1: PME# disabled
[ 0.771750] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.771754] pci 0000:00:1c.2: PME# disabled
[ 0.771847] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.771851] pci 0000:00:1c.3: PME# disabled
[ 0.771928] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.772030] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.772121] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.772212] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.772279] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.772284] pci 0000:00:1d.7: PME# disabled
[ 0.772538] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.772546] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.772553] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.772561] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.772568] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[ 0.772576] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[ 0.772622] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.772626] pci 0000:00:1f.2: PME# disabled
[ 0.772666] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6fdaf00-0xf6fdafff]
[ 0.772685] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.772769] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[ 0.772784] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.772799] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
[ 0.772808] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
[ 0.772816] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.772927] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.772930] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
[ 0.772934] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.773121] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf1ffe000-0xf1ffffff]
[ 0.773246] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.773257] pci 0000:0c:00.0: PME# disabled
[ 0.773347] pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
[ 0.773475] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.773479] pci 0000:00:1c.3: bridge 32bit mmio: [0xf1c00000-0xf1efffff]
[ 0.773487] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.773530] pci 0000:03:01.0: reg 10 32bit mmio: [0xf1bff800-0xf1bfffff]
[ 0.773589] pci 0000:03:01.0: supports D1 D2
[ 0.773591] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.773596] pci 0000:03:01.0: PME# disabled
[ 0.773636] pci 0000:03:01.1: reg 10 32bit mmio: [0xf1bff600-0xf1bff6ff]
[ 0.773694] pci 0000:03:01.1: supports D1 D2
[ 0.773695] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.773700] pci 0000:03:01.1: PME# disabled
[ 0.773742] pci 0000:03:01.2: reg 10 32bit mmio: [0xf1bff700-0xf1bff7ff]
[ 0.773800] pci 0000:03:01.2: supports D1 D2
[ 0.773802] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.773806] pci 0000:03:01.2: PME# disabled
[ 0.773877] pci 0000:00:1e.0: transparent bridge
[ 0.773885] pci 0000:00:1e.0: bridge 32bit mmio: [0xf1b00000-0xf1bfffff]
[ 0.773924] pci_bus 0000:00: on NUMA node 0
[ 0.773928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.774173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.774286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.774343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.774408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.774470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.774532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.786861] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
[ 0.786967] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.787071] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.787173] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.787277] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.787383] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.787488] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.787583] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.787709] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.787713] vgaarb: loaded
[ 0.787811] SCSI subsystem initialized
[ 0.787875] libata version 3.00 loaded.
[ 0.787931] usbcore: registered new interface driver usbfs
[ 0.787941] usbcore: registered new interface driver hub
[ 0.787961] usbcore: registered new device driver usb
[ 0.788101] ACPI: WMI: Mapper loaded
[ 0.788103] PCI: Using ACPI for IRQ routing
[ 0.788326] NetLabel: Initializing
[ 0.788328] NetLabel: domain hash size = 128
[ 0.788329] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.788341] NetLabel: unlabeled traffic allowed by default
[ 0.788370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.788374] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.116054] Switching to clocksource tsc
[ 1.117955] AppArmor: AppArmor Filesystem Enabled
[ 1.117979] pnp: PnP ACPI init
[ 1.117998] ACPI: bus type pnp registered
[ 1.195278] pnp: PnP ACPI: found 14 devices
[ 1.195280] ACPI: ACPI bus type pnp unregistered
[ 1.195284] PnPBIOS: Disabled by ACPI PNP
[ 1.195297] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 1.195299] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 1.195306] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.195312] system 00:0a: ioport range 0xcb0-0xcbb has been reserved
[ 1.195315] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[ 1.195320] system 00:0b: ioport range 0x900-0x92f has been reserved
[ 1.195322] system 00:0b: ioport range 0x931-0x933 has been reserved
[ 1.195324] system 00:0b: ioport range 0x935-0x97f has been reserved
[ 1.195327] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 1.195329] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[ 1.195332] system 00:0b: ioport range 0x1008-0x100f has been reserved
[ 1.195337] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[ 1.195339] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[ 1.195342] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[ 1.195344] system 00:0c: ioport range 0x1060-0x107f has been reserved
[ 1.195346] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[ 1.195349] system 00:0c: ioport range 0x1100-0x111f has been reserved
[ 1.195351] system 00:0c: ioport range 0x1010-0x102f has been reserved
[ 1.195353] system 00:0c: ioport range 0x809-0x809 has been reserved
[ 1.195359] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[ 1.195361] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[ 1.195364] system 00:0d: iomem range 0xc0000-0xd3fff could not be reserved
[ 1.195366] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 1.195369] system 00:0d: iomem range 0x100000-0x7f44d3ff could not be reserved
[ 1.195371] system 00:0d: iomem range 0x7f44d400-0x7fefffff could not be reserved
[ 1.195374] system 00:0d: iomem range 0x7ff00000-0x7fffffff has been reserved
[ 1.195376] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
[ 1.195379] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
[ 1.195381] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 1.195384] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 1.195386] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.195389] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.195391] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 1.195394] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 1.195396] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 1.195398] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 1.195401] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 1.195404] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 1.195406] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 1.230150] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.230153] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 1.230157] pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff
[ 1.230160] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 1.230165] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 1.230168] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 1.230174] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 1.230179] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 1.230186] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 1.230190] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 1.230196] pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff
[ 1.230200] pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 1.230208] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
[ 1.230211] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 1.230217] pci 0000:00:1c.2: MEM window: 0x80600000-0x807fffff
[ 1.230222] pci 0000:00:1c.2: PREFETCH window: 0x00000080800000-0x000000809fffff
[ 1.230230] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e
[ 1.230233] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 1.230239] pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff
[ 1.230244] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 1.230251] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 1.230253] pci 0000:00:1e.0: IO window: disabled
[ 1.230259] pci 0000:00:1e.0: MEM window: 0xf1b00000-0xf1bfffff
[ 1.230263] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.230280] alloc irq_desc for 16 on node -1
[ 1.230282] alloc kstat_irqs on node -1
[ 1.230288] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.230292] pci 0000:00:01.0: setting latency timer to 64
[ 1.230301] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.230306] pci 0000:00:1c.0: setting latency timer to 64
[ 1.230316] alloc irq_desc for 17 on node -1
[ 1.230317] alloc kstat_irqs on node -1
[ 1.230321] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.230325] pci 0000:00:1c.1: setting latency timer to 64
[ 1.230335] alloc irq_desc for 18 on node -1
[ 1.230336] alloc kstat_irqs on node -1
[ 1.230340] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.230344] pci 0000:00:1c.2: setting latency timer to 64
[ 1.230354] alloc irq_desc for 19 on node -1
[ 1.230356] alloc kstat_irqs on node -1
[ 1.230359] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.230363] pci 0000:00:1c.3: setting latency timer to 64
[ 1.230372] pci 0000:00:1e.0: setting latency timer to 64
[ 1.230376] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.230378] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 1.230381] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 1.230383] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff]
[ 1.230385] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 1.230387] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
[ 1.230389] pci_bus 0000:0b: resource 1 mem: [0x80000000-0x801fffff]
[ 1.230392] pci_bus 0000:0b: resource 2 pref mem [0x80200000-0x803fffff]
[ 1.230394] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
[ 1.230396] pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff]
[ 1.230398] pci_bus 0000:0c: resource 2 pref mem [0x80400000-0x805fffff]
[ 1.230400] pci_bus 0000:0d: resource 0 io: [0x4000-0x4fff]
[ 1.230402] pci_bus 0000:0d: resource 1 mem: [0x80600000-0x807fffff]
[ 1.230404] pci_bus 0000:0d: resource 2 pref mem [0x80800000-0x809fffff]
[ 1.230406] pci_bus 0000:0e: resource 0 io: [0xc000-0xcfff]
[ 1.230409] pci_bus 0000:0e: resource 1 mem: [0xf1c00000-0xf1efffff]
[ 1.230411] pci_bus 0000:0e: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 1.230413] pci_bus 0000:03: resource 1 mem: [0xf1b00000-0xf1bfffff]
[ 1.230415] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 1.230417] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 1.230449] NET: Registered protocol family 2
[ 1.230534] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.230792] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.231090] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.231234] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.231236] TCP reno registered
[ 1.231290] NET: Registered protocol family 1
[ 1.231469] pci 0000:01:00.0: Boot video device
[ 1.231627] cpufreq-nforce2: No nForce2 chipset.
[ 1.231648] Scanning for low memory corruption every 60 seconds
[ 1.231737] audit: initializing netlink socket (disabled)
[ 1.231745] type=2000 audit(1319631741.228:1): initialized
[ 1.384198] highmem bounce pool size: 64 pages
[ 1.384203] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.385507] VFS: Disk quotas dquot_6.5.2
[ 1.385556] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.386042] fuse init (API version 7.13)
[ 1.386114] msgmni has been set to 1687
[ 1.386286] alg: No test for stdrng (krng)
[ 1.386333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.386336] io scheduler noop registered
[ 1.386338] io scheduler anticipatory registered
[ 1.386339] io scheduler deadline registered
[ 1.386373] io scheduler cfq registered (default)
[ 1.386500] alloc irq_desc for 24 on node -1
[ 1.386502] alloc kstat_irqs on node -1
[ 1.386510] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.386516] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.386633] alloc irq_desc for 25 on node -1
[ 1.386635] alloc kstat_irqs on node -1
[ 1.386643] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.386653] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.386795] alloc irq_desc for 26 on node -1
[ 1.386797] alloc kstat_irqs on node -1
[ 1.386805] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 1.386815] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.386956] alloc irq_desc for 27 on node -1
[ 1.386958] alloc kstat_irqs on node -1
[ 1.386966] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 1.386976] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.387116] alloc irq_desc for 28 on node -1
[ 1.387118] alloc kstat_irqs on node -1
[ 1.387126] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 1.387136] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.387227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.387345] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.387455] ACPI: AC Adapter [AC] (on-line)
[ 1.387521] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.389392] ACPI: Lid Switch [LID]
[ 1.389429] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.389435] ACPI: Power Button [PBTN]
[ 1.389470] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.389472] ACPI: Sleep Button [SBTN]
[ 1.390116] ACPI: SSDT 7f450999 00281 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 1.390543] ACPI: SSDT 7f450df1 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 1.390836] Monitor-Mwait will be used to enter C-1 state
[ 1.390857] Monitor-Mwait will be used to enter C-2 state
[ 1.390875] Monitor-Mwait will be used to enter C-3 state
[ 1.390879] Marking TSC unstable due to TSC halts in idle
[ 1.390913] processor LNXCPU:00: registered as cooling_device0
[ 1.391290] ACPI: SSDT 7f450c1a 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 1.391593] ACPI: SSDT 7f4513b7 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 1.391842] Switching to clocksource hpet
[ 1.640558] processor LNXCPU:01: registered as cooling_device1
[ 1.670390] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.670398] ACPI: Thermal Zone [THM] (61 C)
[ 1.671668] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.671818] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.672177] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.673089] brd: module loaded
[ 1.673484] loop: module loaded
[ 1.673550] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.673890] Fixed MDIO Bus: probed
[ 1.673917] PPP generic driver version 2.4.2
[ 1.673943] tun: Universal TUN/TAP device driver, 1.6
[ 1.673945] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.674006] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.674028] alloc irq_desc for 22 on node -1
[ 1.674030] alloc kstat_irqs on node -1
[ 1.674036] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.674046] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.674049] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.674074] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.674101] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.677986] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.677999] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.682117] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.682126] isapnp: Scanning for PnP cards...
[ 1.731651] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.731764] usb usb1: configuration #1 chosen from 1 choice
[ 1.731789] hub 1-0:1.0: USB hub found
[ 1.731796] hub 1-0:1.0: 6 ports detected
[ 1.731858] alloc irq_desc for 20 on node -1
[ 1.731860] alloc kstat_irqs on node -1
[ 1.731866] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.731882] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.731885] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.731918] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.731944] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.735844] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.735859] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.783790] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.783864] usb usb2: configuration #1 chosen from 1 choice
[ 1.783887] hub 2-0:1.0: USB hub found
[ 1.783892] hub 2-0:1.0: 6 ports detected
[ 1.783948] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.783964] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.783996] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.784004] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.784007] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.784034] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.784059] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 1.784132] usb usb3: configuration #1 chosen from 1 choice
[ 1.784189] hub 3-0:1.0: USB hub found
[ 1.784194] hub 3-0:1.0: 2 ports detected
[ 1.784235] alloc irq_desc for 21 on node -1
[ 1.784237] alloc kstat_irqs on node -1
[ 1.784241] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.784247] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.784250] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.784278] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.784312] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 1.784383] usb usb4: configuration #1 chosen from 1 choice
[ 1.784404] hub 4-0:1.0: USB hub found
[ 1.784409] hub 4-0:1.0: 2 ports detected
[ 1.784449] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.784455] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.784458] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.784486] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.784510] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 1.784581] usb usb5: configuration #1 chosen from 1 choice
[ 1.784605] hub 5-0:1.0: USB hub found
[ 1.784610] hub 5-0:1.0: 2 ports detected
[ 1.784650] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.784656] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.784659] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.784685] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.784709] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 1.784778] usb usb6: configuration #1 chosen from 1 choice
[ 1.784800] hub 6-0:1.0: USB hub found
[ 1.784805] hub 6-0:1.0: 2 ports detected
[ 1.784841] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.784848] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.784851] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.784876] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.784899] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 1.784968] usb usb7: configuration #1 chosen from 1 choice
[ 1.784991] hub 7-0:1.0: USB hub found
[ 1.785013] hub 7-0:1.0: 2 ports detected
[ 1.785051] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.785056] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.785059] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.785083] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.785107] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.785179] usb usb8: configuration #1 chosen from 1 choice
[ 1.785200] hub 8-0:1.0: USB hub found
[ 1.785206] hub 8-0:1.0: 2 ports detected
[ 1.785289] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.785926] i8042.c: Warning: Keylock active.
[ 1.789077] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.789375] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.789478] mice: PS/2 mouse device common for all mice
[ 1.789592] rtc_cmos 00:03: RTC can wake from S4
[ 1.789623] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.789652] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.789738] device-mapper: uevent: version 1.0.3
[ 1.789825] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.789878] device-mapper: multipath: version 1.1.0 loaded
[ 1.789881] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.789977] EISA: Probing bus 0 at eisa.0
[ 1.789980] EISA: Cannot allocate resource for mainboard
[ 1.789982] Cannot allocate resource for EISA slot 1
[ 1.789983] Cannot allocate resource for EISA slot 2
[ 1.789985] Cannot allocate resource for EISA slot 3
[ 1.789987] Cannot allocate resource for EISA slot 4
[ 1.790004] EISA: Detected 0 cards.
[ 1.790121] cpuidle: using governor ladder
[ 1.790253] cpuidle: using governor menu
[ 1.790595] TCP cubic registered
[ 1.790727] NET: Registered protocol family 10
[ 1.791120] lo: Disabled Privacy Extensions
[ 1.791410] NET: Registered protocol family 17
[ 1.793263] Using IPI No-Shortcut mode
[ 1.793324] PM: Resume from disk failed.
[ 1.793334] registered taskstats version 1
[ 1.793867] Magic number: 15:74:381
[ 1.793944] rtc_cmos 00:03: setting system clock to 2011-10-26 12:22:22 UTC (1319631742)
[ 1.793947] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.793949] EDD information not available.
[ 1.970685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.059331] isapnp: No Plug & Play device found
[ 2.064407] Freeing initrd memory: 9250k freed
[ 2.068126] Freeing unused kernel memory: 660k freed
[ 2.068527] Write protecting the kernel text: 4688k
[ 2.068578] Write protecting the kernel read-only data: 1844k
[ 2.086961] udev: starting version 151
[ 2.105211] ACPI: Battery Slot [BAT0] (battery present)
[ 2.191335] acpi device:35: registered as cooling_device2
[ 2.192028] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:33/LNXVIDEO:00/input/input5
[ 2.192068] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.241560] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 2.241563] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.241605] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.241614] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.241708] alloc irq_desc for 29 on node -1
[ 2.241710] alloc kstat_irqs on node -1
[ 2.241722] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 2.244661] Linux agpgart interface v0.103
[ 2.257862] ohci1394 0000:03:01.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.314099] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f1bff800-f1bfffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.354160] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:91:ab:fc
[ 2.354162] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.354188] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1004ff-0ff
[ 2.354207] ahci 0000:00:1f.2: version 3.0
[ 2.354220] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.354257] alloc irq_desc for 30 on node -1
[ 2.354258] alloc kstat_irqs on node -1
[ 2.354268] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 2.354313] ahci: SSS flag set, parallel bus scan disabled
[ 2.354347] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
[ 2.354350] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 2.354356] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.358303] [drm] Initialized drm 1.1.0 20060810
[ 2.380092] scsi0 : ahci
[ 2.380245] scsi1 : ahci
[ 2.380331] scsi2 : ahci
[ 2.380416] scsi3 : ahci
[ 2.380500] scsi4 : ahci
[ 2.380589] scsi5 : ahci
[ 2.380973] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 30
[ 2.380977] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 30
[ 2.380979] ata3: DUMMY
[ 2.380980] ata4: DUMMY
[ 2.380983] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 30
[ 2.380986] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 30
[ 2.381471] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.381485] nouveau 0000:01:00.0: setting latency timer to 64
[ 2.382506] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[ 2.382775] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298580a2)
[ 2.383183] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 2.413054] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.487824] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 2.487827] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 2.487829] [drm] nouveau 0000:01:00.0: Bios version 62.98.3c.00
[ 2.487832] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 2.487834] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 2.487837] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 2.487840] [drm] nouveau 0000:01:00.0: 0: 0x00000041: type 0x41 idx 0 tag 0xff
[ 2.487842] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 2.487845] [drm] nouveau 0000:01:00.0: 2: 0x00005246: type 0x46 idx 2 tag 0x07
[ 2.487847] [drm] nouveau 0000:01:00.0: 3: 0x0000a346: type 0x46 idx 3 tag 0x08
[ 2.487849] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[ 2.487852] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[ 2.487854] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022386 0f200010
[ 2.487856] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022332 00020010
[ 2.487858] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 040333a6 0f200010
[ 2.487860] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 04033312 00020010
[ 2.487862] [drm] nouveau 0000:01:00.0: Raw DCB entry 6: 0000000e 00000000
[ 2.487879] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD601
[ 2.536211] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD9B3
[ 2.560095] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE259
[ 2.560114] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE34B
[ 2.568148] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE557
[ 2.568160] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE5BC
[ 2.589655] usb 5-1: configuration #0 chosen from 1 choice
[ 2.589659] usb 5-1: config 0 descriptor??
[ 2.592062] [drm] nouveau 0000:01:00.0: 0xE5BC: Condition still not met after 20ms, skipping following opcodes
[ 2.592081] [drm] nouveau 0000:01:00.0: 0xC1AA: parsing output script 0
[ 2.592085] [drm] nouveau 0000:01:00.0: 0xC7DC: parsing output script 0
[ 2.592088] [drm] nouveau 0000:01:00.0: 0xC5CE: parsing output script 0
[ 2.592103] [drm] nouveau 0000:01:00.0: 0xC7DC: parsing output script 0
[ 2.592106] [drm] nouveau 0000:01:00.0: 0xC5CE: parsing output script 0
[ 2.751344] [TTM] Zone kernel: Available graphics memory: 436984 kiB.
[ 2.751347] [TTM] Zone highmem: Available graphics memory: 1024918 kiB.
[ 2.751361] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[ 2.775495] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 2.775501] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 2.775761] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 2.781013] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 2.781877] [drm] nouveau 0000:01:00.0: Detected a LVDS output
[ 2.781888] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 2.781890] [drm] nouveau 0000:01:00.0: Detected a DP output
[ 2.781892] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 2.781894] [drm] nouveau 0000:01:00.0: Detected a DP output
[ 2.781896] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 2.781899] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 2.844046] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 2.865049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.896699] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 2.896725] [drm] nouveau 0000:01:00.0: Detected a DisplayPort connector
[ 2.896748] [drm] nouveau 0000:01:00.0: Detected a DisplayPort connector
[ 3.013846] usb 6-2: configuration #1 chosen from 1 choice
[ 3.116391] ata1.00: ATA-8: ST9160411ASG, DE17, max UDMA/133
[ 3.116395] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.161853] ata1.00: configured for UDMA/133
[ 3.177160] scsi 0:0:0:0: Direct-Access ATA ST9160411ASG DE17 PQ: 0 ANSI: 5
[ 3.177278] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.177447] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.177487] sd 0:0:0:0: [sda] Write Protect is off
[ 3.177489] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.177510] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.177627] sda: sda1 sda2 < sda5 >
[ 3.228606] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.589146] ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc0000568d05c]
[ 4.024333] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo f691d200
[ 4.024378] fb0: nouveaufb frame buffer device
[ 4.024379] registered panic notifier
[ 4.024384] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 4.064252] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.068624] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-U20N, A101, max UDMA/133
[ 4.075369] ata2.00: configured for UDMA/133
[ 4.095879] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-U20N A101 PQ: 0 ANSI: 5
[ 4.100912] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.100916] Uniform CD-ROM driver Revision: 3.20
[ 4.101015] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.101075] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.420223] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.756227] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.776759] usbcore: registered new interface driver hiddev
[ 4.777950] vga16fb: initializing
[ 4.777952] vga16fb: mapped to 0xc00a0000
[ 4.777955] vga16fb: not registering due to another framebuffer present
[ 4.787021] Console: switching to colour frame buffer device 180x56
[ 4.787040] [drm] nouveau 0000:01:00.0: 0xC1AE: parsing output script 1
[ 4.787076] [drm] nouveau 0000:01:00.0: 0xC065: parsing clock script 0
[ 4.791989] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input6
[ 4.792079] generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 4.792105] usbcore: registered new interface driver usbhid
[ 4.792107] usbhid: v2.6:USB HID core driver
[ 5.043472] [drm] nouveau 0000:01:00.0: 0xC1A5: parsing clock script 1
[ 6.469882] xor: automatically using best checksumming function: pIII_sse
[ 6.488023] pIII_sse : 9620.000 MB/sec
[ 6.488025] xor: using function: pIII_sse (9620.000 MB/sec)
[ 6.490091] device-mapper: dm-raid45: initialized v0.2594b
[ 8.154464] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.154470] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.154476] Info fld=0x543c6, ILI
[ 8.154479] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.154486] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.154497] end_request: I/O error, dev sr0, sector 1380120
[ 8.154501] Buffer I/O error on device sr0, logical block 172515
[ 8.158874] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.158880] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.158885] Info fld=0x543c6, ILI
[ 8.158887] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.158894] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.158906] end_request: I/O error, dev sr0, sector 1380120
[ 8.158909] Buffer I/O error on device sr0, logical block 172515
[ 8.162026] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.162030] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.162036] Info fld=0x543c6, ILI
[ 8.162038] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.162044] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.162055] end_request: I/O error, dev sr0, sector 1380120
[ 8.162058] Buffer I/O error on device sr0, logical block 172515
[ 8.164954] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.164958] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.164964] Info fld=0x543c6, ILI
[ 8.164966] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.164972] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.164983] end_request: I/O error, dev sr0, sector 1380120
[ 8.164987] Buffer I/O error on device sr0, logical block 172515
[ 8.168921] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.168925] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.168931] Info fld=0x543c6, ILI
[ 8.168933] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.168939] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.168950] end_request: I/O error, dev sr0, sector 1380120
[ 8.168953] Buffer I/O error on device sr0, logical block 172515
[ 8.172104] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.172108] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.172114] Info fld=0x543c6, ILI
[ 8.172116] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.172122] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.172133] end_request: I/O error, dev sr0, sector 1380120
[ 8.172136] Buffer I/O error on device sr0, logical block 172515
[ 8.175036] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.175040] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.175045] Info fld=0x543c6, ILI
[ 8.175047] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.175053] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.175065] end_request: I/O error, dev sr0, sector 1380120
[ 8.175068] Buffer I/O error on device sr0, logical block 172515
[ 8.302511] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.302515] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.302520] Info fld=0x543c6, ILI
[ 8.302522] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.302528] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.302540] end_request: I/O error, dev sr0, sector 1380120
[ 8.302543] Buffer I/O error on device sr0, logical block 172515
[ 8.305457] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.305461] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.305466] Info fld=0x543c6, ILI
[ 8.305468] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.305474] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.305486] end_request: I/O error, dev sr0, sector 1380120
[ 8.305489] Buffer I/O error on device sr0, logical block 172515
[ 8.308662] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8.308667] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 8.308673] Info fld=0x543c6, ILI
[ 8.308675] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 8.308681] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 02 00
[ 8.308692] end_request: I/O error, dev sr0, sector 1380120
[ 8.308696] Buffer I/O error on device sr0, logical block 172515
[ 9.143203] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9.227447] ISO 9660 Extensions: RRIP_1991A
[ 9.278613] aufs 2-standalone.tree-20091207
[ 9.363091] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 63.374555] udev: starting version 151
[ 69.204180] cfg80211: Calling CRDA to update world regulatory domain
[ 69.206098] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 70.095310] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
[ 70.112088] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
[ 70.357815] sdhci: Secure Digital Host Controller Interface driver
[ 70.357818] sdhci: Copyright(c) Pierre Ossman
[ 70.527745] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 70.528908] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 21)
[ 70.528927] sdhci-pci 0000:03:01.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 70.530980] Registered led device: mmc0::
[ 70.532003] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 70.532012] sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0843] (rev 11)
[ 70.532027] sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 70.533039] mmc1: Hardware doesn't specify base clock frequency.
[ 70.533048] sdhci-pci 0000:03:01.2: PCI INT C disabled
[ 70.761560] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 70.761562] ricoh-mmc: Copyright(c) Philip Langdale
[ 70.761587] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 11)
[ 70.761603] ricoh-mmc: Controller is now disabled.
[ 72.023580] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 72.023583] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 72.023661] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 72.023691] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 72.023742] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 72.060251] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 72.060317] alloc irq_desc for 31 on node -1
[ 72.060319] alloc kstat_irqs on node -1
[ 72.060337] iwlagn 0000:0c:00.0: irq 31 for MSI/MSI-X
[ 73.572455] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 73.967903] cfg80211: World regulatory domain updated:
[ 73.967906] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 73.967909] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 73.967911] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 73.967913] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 73.967916] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 73.967918] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 74.896268] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 74.952095] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 74.952351] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 76.548833] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 76.548836] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 76.549026] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 78.160010] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 78.160042] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 79.264699] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 79.278119] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 79.278297] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 79.278355] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 79.278436] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 87.045012] eth0: no IPv6 routers present
[ 88.666715] lp: driver loaded but no devices found
[ 89.295584] ppdev: user-space parallel port driver
[ 91.622278] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 91.627828] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 143.816050] CE: hpet increasing min_delta_ns to 15000 nsec
[ 146.130159] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
[ 147.408834] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 147.414107] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 169.566615] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.566627] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.566640] Info fld=0x543c6, ILI
[ 169.566645] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.566658] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 169.566683] end_request: I/O error, dev sr0, sector 1380120
[ 169.566693] Buffer I/O error on device sr0, logical block 345030
[ 169.569615] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.569625] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.569636] Info fld=0x543c7, ILI
[ 169.569640] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.569653] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 169.569676] end_request: I/O error, dev sr0, sector 1380124
[ 169.569684] Buffer I/O error on device sr0, logical block 345031
[ 169.573722] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.573730] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.573741] Info fld=0x543c6, ILI
[ 169.573745] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.573758] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 169.573780] end_request: I/O error, dev sr0, sector 1380120
[ 169.573787] Buffer I/O error on device sr0, logical block 345030
[ 169.576954] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.576963] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.576974] Info fld=0x543c7, ILI
[ 169.576978] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.576990] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 169.577013] end_request: I/O error, dev sr0, sector 1380124
[ 169.577020] Buffer I/O error on device sr0, logical block 345031
[ 169.580125] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.580138] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.580153] Info fld=0x543c6, ILI
[ 169.580158] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.580172] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 169.580207] end_request: I/O error, dev sr0, sector 1380120
[ 169.580216] Buffer I/O error on device sr0, logical block 345030
[ 169.583095] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.583104] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.583114] Info fld=0x543c7, ILI
[ 169.583119] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.583131] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 169.583154] end_request: I/O error, dev sr0, sector 1380124
[ 169.583161] Buffer I/O error on device sr0, logical block 345031
[ 169.587286] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.587295] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.587305] Info fld=0x543c6, ILI
[ 169.587310] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.587322] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 169.587345] end_request: I/O error, dev sr0, sector 1380120
[ 169.587352] Buffer I/O error on device sr0, logical block 345030
[ 169.590234] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.590243] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.590254] Info fld=0x543c7, ILI
[ 169.590259] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.590270] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 169.590293] end_request: I/O error, dev sr0, sector 1380124
[ 169.590300] Buffer I/O error on device sr0, logical block 345031
[ 169.593404] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.593413] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.593423] Info fld=0x543c6, ILI
[ 169.593428] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.593440] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 169.593462] end_request: I/O error, dev sr0, sector 1380120
[ 169.593469] Buffer I/O error on device sr0, logical block 345030
[ 169.596341] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.596350] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.596361] Info fld=0x543c7, ILI
[ 169.596365] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.596377] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 169.596400] end_request: I/O error, dev sr0, sector 1380124
[ 169.596407] Buffer I/O error on device sr0, logical block 345031
[ 169.600247] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.600255] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.600266] Info fld=0x543c6, ILI
[ 169.600271] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.600283] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 169.600306] end_request: I/O error, dev sr0, sector 1380120
[ 169.603412] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.603420] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.603431] Info fld=0x543c7, ILI
[ 169.603435] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.603447] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 169.603469] end_request: I/O error, dev sr0, sector 1380124
[ 169.606362] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.606370] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.606381] Info fld=0x543c6, ILI
[ 169.606385] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.606397] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 169.606420] end_request: I/O error, dev sr0, sector 1380120
[ 169.609524] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 169.609533] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 169.609544] Info fld=0x543c7, ILI
[ 169.609548] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 169.609560] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 169.609583] end_request: I/O error, dev sr0, sector 1380124
[ 170.161372] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 170.161385] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 170.161398] Info fld=0x543c6, ILI
[ 170.161402] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 170.161415] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 170.161440] end_request: I/O error, dev sr0, sector 1380120
[ 170.165424] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 170.165433] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 170.165444] Info fld=0x543c7, ILI
[ 170.165449] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 170.165461] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 170.165484] end_request: I/O error, dev sr0, sector 1380124
[ 170.168698] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 170.168707] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 170.168717] Info fld=0x543c6, ILI
[ 170.168722] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 170.168734] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 170.168756] end_request: I/O error, dev sr0, sector 1380120
[ 170.171619] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 170.171628] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 170.171638] Info fld=0x543c7, ILI
[ 170.171642] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 170.171654] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 170.171677] end_request: I/O error, dev sr0, sector 1380124
[ 170.175632] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 170.175641] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 170.175652] Info fld=0x543c6, ILI
[ 170.175656] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 170.175668] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c6 00 00 01 00
[ 170.175691] end_request: I/O error, dev sr0, sector 1380120
[ 170.178749] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 170.178757] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 170.178768] Info fld=0x543c7, ILI
[ 170.178773] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 170.178785] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 05 43 c7 00 00 01 00
[ 170.178807] end_request: I/O error, dev sr0, sector 1380124J'ai l'impression qu'il y a beaucoup de messages d'erreurs mais ca doit venir du fait que je soit en liveCD.
Alors, peux tu sauver cette cle ?
Desole pour les accents, mais j'utilise un clavier Qwerty...
Hors ligne
#1331 Le 26/10/2011, à 14:47
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@charlybozo
Bonjour,
Hum ça sent mauvais ...
Ubuntu voit ta clé USB comme un cdrom, et du coup il n'arrivre pas a la monter.
c'est quoi le modéle/marque de ta clé USB ?
a tout hasard fait voir le retour de: sudo fdisk -l
a mon avis elle contient un controleur qui gère les partitions cdfs (emulation de cdrom)
et le firmware interne de la clé USB est corrompu, soit pas de chance ca arrive,
soit par un virus win, soit pas utilisation d'un soft win genre "SMI_UFD_Utility" ...
il existe un site russe (assez indigeste pour nous autres mangeurs de grenouilles)
qui référence pas mal de firmware de clé USB, et qui permet de les restaurer ...
http://www.flashboot.ru/
(essaie par gogle translate) http://translate.google.fr/translate?u= … =&ie=UTF-8
Dernière modification par frafa (Le 26/10/2011, à 14:50)
Hors ligne
#1332 Le 26/10/2011, à 19:34
- Qid
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
pour info les lecteur CD virtuel dans les clef usb c'est le style des type U3 : les framakey propriétaires
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#1333 Le 27/10/2011, à 12:22
- HLFH
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@Qid
Hello,
Oui ma clé est une Sandisk Cruzer Titanium 8 Go et c'est au format U3. Il y avait ce problème de lecteur CD virtuel jusqu'à ce que je désactive dans le menu U3. Ou formate tout simplement...? En tout cas, ça s'était résolu sous Windows... ***Je hais ces clés***
@SMO
Hello,
Pour ce qui est du support Mac OS X pour MultiSystem :
Je précise tout d'abord qu'essayer de supporter MacOS X, c'est essayer le plus bel exemple de l'UEFI (post-BIOS) et du Secure Boot qu'a copié Windows 8 en quelque sorte... La direction de l'UEFI n'est pas saine et si MultiSystem supporte MacOS X, l'utilisateur devra d'abord avoir un BIOS-type UEFI ou modifié. Je ne suis plus supporter de ces verroux imposés. Et ceci ne changera pas la donne : http://www.dailynux.fr/2011/10/28/la-li … -de-luefi/
Deux axes : le Hackintosh, et l'install' d'images disques Mac sur un vrai Mac avec MultiSystem.
Le premier axe, j'aime pas. Trop difficile. Pas universel. Artisanal. Dans trois ans peut-être que oui...?
Premier problème : le Hardware est pas souvent compatible du premier coup = le problème des kexts (kernel extensions, sorte de drivers) mais des Mac OS X remasterisés s'en occupent à priori comme le Hack OS X iATKOS L1 ou maintenant aussi BLANGSAK Lion V3 mais sans doute pas à 100%.
Deuxième problème : le firmware du BIOS (il faut rendre visible les options SATA Mode to AHCI et ACPI Power Mode S3 "SuspendToRAM" voire aussi HPET en 64-Bits mode) bloqué et limité en général surtout sur les PCs portables. Il faut donc priviléger un PC portable avec une marque faisant partie de l'institut de normalisation UEFI. Asus gère le mieux de ce côté là je crois (et un peu MSI). Pour déverrouiller le BIOS, c'est le site http://bios-mods.com/ qui s'en occupe gentiment à votre place.
Troisième : avoir un Mac pour pouvoir gérer l'install' d'un Mac sur un PC sinon on est dans la galère mais des solutions incertaines existent comme ImageWriter dispo sous Windows et GNU/Linux pour booter Mac OS X via USB. Il reste toujours la virtualisation avec VBox ou Qemu pour "préparer le Hackintosh".
Quatrième : mode préparatoire rustique ==> DVD-RW avec une gravure foireuse le plus souvent, USB pas géré de la même manière, iATKOS n'est pas optimisé de premier abord pour l'USB. Il faut préférer dans un souci de compatibilité un DVD-R ou DVD+R récent de gravure au moins 8x (récent donc j'insiste !) plutôt de marque Verbatim que de la marque Sony et ce, pour un lecteur optique au format SATA. Sinon, par mode usb, en prenant en compte les ordinateurs portables, on ne peut qu'utiliser l'utilitaire de disque mac avec quelques tâches pas forcément "automatiques" ou vous pouvez toujours aller voir l'utilitaire UniBeast de Tonymacx86...
LE DEVEROUILLAGE DU BIOS EST TRES IMPORTANT C'EST LA PREMIERE ETAPE A REALISER.
Cinquième : nombre de tutoriels Hackintosh hallucinants et bazardeux traitant du même sujet mais différemment, c'est bien qu'aucune manière de procéder ne s'est imposée. Car aucune méthode ne marche à 100%. Les uniques communautés francophones : http://www.mac-on-pc.fr/index.php et http://darwinx86.net/ Franchement, allez-y ! Let's go ! Il faut tout de même garder à l'esprit que le site de référence reste : http://wiki.osx86project.org/wiki/index.php/Main_Page
Dans deux ou trois ans, on pourrait rêver et penser que le Mac est moins unilatéral, moins UniSystem et plus...MultiSystem.
Mais là, franchement, la philosophie MultiSystem et du Libre ne s'accordent en rien au principe du Hackintosh qui est si usant en temps à mettre en place par le large nombre de verrous existants. On est libre peut-être mais on ne l'était pas. Je préfère le libre instantané
Le support de Mac OS X par MultiSystem pour ceux qui ont un vrai Mac, c'est d'abord plus envisageable que le...reste. Je propose de commencer par là. Il faudrait faire un bi-partitionnement Fat32, HFS+. Et puis... Au lieu de faire une entrée Grub2 dans MultiSystem qu'est pas sûre de marcher, il faut dropper dans MultiSystem l'outil iBoot (pour Snow Leopard) ou encore rBoot tout court et sa version LE (Laptop Edition pour PCs portables) de tonymacx86 qui redirigera vers la deuxième partition du disque dur amovible. Et ça booterait tranquillement sans modif' à l'aide de Plop Boot Manager. Pour mettre Mac OS X sur la deuxième partition au format HFS+, soit on teste avec ImageWriter ou de façon plus efficace avec l'utilitaire de disque Mac. En gros, je teste, je teste, et je teste et j'ai pas fini de tester. Je crois bien que la table de partitions peut être Msdos voire GUID (à voir aussi avec le best soft de partitionnement GParted).
Cordialement,
Dernière modification par HackerLiberty (Le 02/11/2011, à 18:09)
Hors ligne
#1334 Le 28/10/2011, à 17:46
- MiP
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Bonjour frafra, s'il vous plaît excuser mon googletranslator français.
Mon problème: J'utilise une longue période de Multisystème et tout a fonctionné, j'ai créé plusieurs liveusb, grâce à vous.
J'ai dû réinstaller mon ubuntu 9.10. Maintenant quand je lance Multisystem, dit toujours à moi: «Erreur: Pas de sélection». Clé usb est monté sous / media, mais multisystème le voir. Pouvez-vous s'il vous plaît conseiller sur ce que je fais mal? Merci!
Ceci est mon debog-detect-liste:
line:/dev/sdb1 on /media/MULTISYSTEM type vfat (rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,flush)
DISK_MOUNT:/dev/sdb1
DISK_MOUNTPOINT:/media/MULTISYSTEM
ID_FS_LABEL:MULTISYSTEM
ID_FS_LABEL_ENC:MULTISYSTEM
ID_FS_UUID:93CB-47E7
ID_FS_TYPE:vfat
ID_FS_VERSION:FAT32
ID_TYPE:disk
ID_BUS:usb
ID_USB_DRIVER:usb-storage
ID_PART_TABLE_TYPE:
DEVNAME:sdb1
ID_SERIAL:
ID_SERIAL_SHORT:078A01A602A3
UDISKS_PARTITION_NUMBER:1
DISK_MOUNT:/dev/sdb1
UDISKS_PARTITION_SIZE:1955716096
ID_VENDOR:
ID_MODEL:USB_DISK_2.0
Hors ligne
#1335 Le 28/10/2011, à 19:01
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@MiP
Hi
you have selected your USB drive in the window before clicking Validate ?
send-me the return of this cmd:
lsb_release -a && gtkdialog -v && apt-cache policy multisystemDernière modification par frafa (Le 28/10/2011, à 19:05)
Hors ligne
#1336 Le 28/10/2011, à 20:29
- MiP
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@frafa
my2@my2-desktop:~$ lsb_release -a && gtkdialog -v && apt-cache policy multisystem
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
gtkdialog version 0.8.0 (C) 2003-2007 Laszlo Pere, 2011 Thunor
multisystem:
Instalovaná verze: 1.0145
Kandidát: 1.0145
Tabulka verzí:
*** 1.0145 0
500 http://liveusb.info all/main Packages
100 /var/lib/dpkg/status
my2@my2-desktop:~$
Hors ligne
#1337 Le 28/10/2011, à 21:35
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
It must be a bug with Ubuntu 9.10 "Karmic Koala"
but I can not test this version is no longer maintained by canonical
http://releases.ubuntu.com/
Why do you use a version as old and not maintained?
START multisystem in a terminal,
and send the return after you select your USB stick and validated ...
multisystemHors ligne
#1338 Le 30/10/2011, à 06:53
- MiP
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@ frafra
Thank you, frafra, I'll consider upgrading Ubuntu
Hors ligne
#1339 Le 02/11/2011, à 09:05
- Wolf
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Bonjour,
Je souhaite mettre Hirens.BootCD.15.0 sur ma clé. Après copie de l'ISO, j'ai une erreur de boot : file not found HBCD/boot.gz ... et effectivement, ce fichier n'est pas dans le dossier HBCD ...
J'ai vérifié le MD5 de l'iso qui est pourtant OK !
étrange .. !? Il manque les fichiers directement depuis l'ISO ??!
"On a pas besoin de leurs dollars. Juste des rêves et sa guitare".
Hors ligne
#1340 Le 02/11/2011, à 13:13
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@Wolf
Bonjour,
Ils ont du modifier la position/nom du fichier de boot sur cette nouvelle version,
Je télécharge, et je te dit quoi ...
Hors ligne
#1341 Le 02/11/2011, à 13:38
- HLFH
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@frafa
Bonjour,
Y a-t-il une alternative à rEFIt pour démarrer d'une clé USB MultiSystem sur un Mac Intel ? Pour ma part, la solution rEFIt ne marche pas...
Merci d'avance
Hors ligne
#1342 Le 02/11/2011, à 13:50
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@HackerLiberty
Bonjour,
Plop Boot Manager ...
Hors ligne
#1343 Le 02/11/2011, à 14:26
- HLFH
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@Frafa
Ok merci je me disais bien que l'unique alternative était Plop Boot Manager... Mais on est bien d'accord que cette solution pour les Mac Intel ne marche que par CD/DVD...? Et non pas par intégration de Plop Boot Manager sur une clé USB ou directement sur le disque dur Macintosh HD comme le fait rEFIt ?
Hors ligne
#1344 Le 02/11/2011, à 14:37
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@HackerLiberty
Re,
Ben je n'ai pas de MacIntel sous la main pour tester,
mais je pense que soit en modifiant le menu de boot d'un mac,
soit via refit ca doit aussi être possible de booter plop sans passer par un cdrom.
sous linux l'entrée à ajouter à grub2 pour booter plop est:
menuentry "PLoP Boot Manager" {
linux16 /boot/img/plpbt
}
tu copie le fichier de ta clé USB: /media/MULTISYSTEM/boot/img/plpbt
et faut trouver le moyen de booter dessus avec refit, ca doit pas être sorcier,
mais je n'ai rien pour tester ...
Hors ligne
#1345 Le 02/11/2011, à 14:44
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@Wolf
Re,
Bon pour Hiren ils ont reconstruit totalement la structure sur la version 15.0
et ils ont enfin mis des liens entiers qui pointent bien vers les fichiers
du coup ca devrait être plus facile que avant de chainer direct sur leur fichier de conf
ajoute cette entrée à ton fichier: /media/MULTISYSTEM/boot/grub/menu.lst
title Hiren's 15.0 BootCD
lock
find --set-root /HBCD/menu.lst
configfile /HBCD/menu.lst
met à jour Grub et teste ...
je fait de mon coté des test pour voir si tout fonctionne bien en mode usb,
et je met à jour son support, n'hesite pas a faire un retour si tu trouve un truc qui ne fonctionne pas ...
Hors ligne
#1346 Le 02/11/2011, à 16:19
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@Wolf
Re,
Fait "Mise à jour partielle" efface et redrop ton iso de hiren
Hors ligne
#1347 Le 03/11/2011, à 15:39
- rmoz
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
[Résolu]
Bonjour frafa,
J'utilise Multisystem depuis quelque temps et ça marche très bien sauf pour la 11.10 (et d'après ce que j'ai vu pareil pour la 10.10 et la 11.04)
Car je fais partie des malchanceux qui se retrouvent avec un écran noir (carte nvidia GeForce 8600GT).
Pour corriger cela il faut cocher l'option "nomodeset" au démarrage.
Oui mais encore faut-il pouvoir accéder à l'écran d'ubuntu qui le permet (avec l'icone du clavier).
Or ton soft ne le permet pas puisque c'est le splash de multisystem qui est affiché.
J'ai donc refait une clé avec usbcreator inclus dans la distrib et la même iso. Et bien sûr là ça marche.
Je ne sais pas ce qu'il faut modifier ni ou (dans /media/ma_clef/boot/grub ? Après je sèche).
Merci de me donner au moins une piste.
Ce serait dommage de se priver d'un logiciel si pratique (quelques distrib, clonezilla, gparted,... sur la meme clé c'est génial).
Edit: Je précise que par ailleurs cette clé permet sans problème de monter le live de la 11.10 sur la tour de mon épouse (qui elle a un chipset nvidia GeForce 7025 intégré).
C'est vraiment un pb avec certaines cartes graphiques voir même peut-être certaines révisions ou versions de firmware.
Merci par avance.
Dernière modification par rmoz (Le 03/11/2011, à 17:26)
Hors ligne
#1348 Le 03/11/2011, à 16:50
- frafa
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
@rmoz
Bonjour,
il te suffit d'ajouter l'option de démarrage "nomodeset"
depuis multisystem a ta distribution, c'est géré graphiquement par multisystem dans le gui principal
voir nomodeset.gif animé ci-dessous...
Hors ligne
#1349 Le 03/11/2011, à 17:26
- rmoz
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Merci frafa,
Le rouge me monte au front de n'avoir pas vu cette fonctionnalité pourtant si bien implantée.
Probablement la (mauvaise) habitude d'un vieux linuxien de lancer le terminal avant de regarder un peu mieux un gui
pourtant très fonctionnel.
Super programme très complet que je recommande.
Encore merci
Hors ligne
#1350 Le 08/11/2011, à 14:02
- Wolf
Re : MultiSystem, Créez votre LiveUSB MultiBoot simplement!
Bonjour,
@Frafra : Problème résolu concernant Hiren's Boot V15 ça boot correctement maintenant.
Merci
"On a pas besoin de leurs dollars. Juste des rêves et sa guitare".
Hors ligne