Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

ArchangeGabriel · Le 16/09/2011, à 14:44

Pas d'espace, pas de ligne vide ?

cbrunos · Le 16/09/2011, à 14:54

Voici exactement comment il est:

http://dl.dropbox.com/u/1343895/cardoff

Ton asus u43Jc c'est bien le modèle 14" avec 4 go de ram et la carte nvidia m310?

Dernière modification par cbrunos (Le 16/09/2011, à 14:55)

ArchangeGabriel · Le 16/09/2011, à 15:04

Exactement (U43Jc-WX059V).

Le cardoff semble correct, je regarde d'où peut provenir le problème.

cbrunos · Le 16/09/2011, à 15:11

ArchangeGabriel a écrit :

Exactement (U43Jc-WX059V).

C'est exactement mon modèle aussi, au moins on est déjà assurés d'avoir exactement le même. Si ça peut t'aider, pour l'ancien bumblebee, celui de Martin Juhl je choisissais ta config parmi la liste proposée et ça marchait.

ArchangeGabriel · Le 16/09/2011, à 15:42

Peux-tu me donner le résultat de la commande suivante :

while read -r call; do echo "$call" done < /etc/bumblebee/cardoff

cbrunos · Le 16/09/2011, à 15:46

Rien ne se passe:

cbrunos@bamboo:~$ while read -r call; do echo "$call" done < /etc/bumblebee/cardoff
>

C'est comme s'il attendait que je rentre quelque chose dans le terminal.

Dernière modification par cbrunos (Le 16/09/2011, à 15:47)

ArchangeGabriel · Le 16/09/2011, à 15:47

Hum, essaye avec un ; à la fin.

nouvoflow · Le 16/09/2011, à 15:49

Salut,
Carte Graphique : NVIDIA GeForce GT540M 1024MB DDR3 Optimus

voiiaaa

cbrunos · Le 16/09/2011, à 15:50

Rien ne se passe non plus, il n'y a que le symbole > qui apparaît une ligne en dessous.

ArchangeGabriel · Le 16/09/2011, à 15:52

Hum, et ça (désolé, je n'ai pas de quoi tester sous la main) :

while read -r call; do echo "$call"; done < "/etc/bumblebee/cardoff"

cbrunos · Le 16/09/2011, à 15:59

Voilà ça a marché cette fois-ci:

cbrunos@bamboo:~$ while read -r call; do echo "$call"; done < "/etc/bumblebee/cardoff"
\_SB.PCI0.RP00.VGA._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x1A {0x1,0x0,0x0,0x3}

ArchangeGabriel · Le 16/09/2011, à 16:00

Ok, donc le problème est ici...

Je vais voir ce que je peux faire, ce sera certainement réglé par une version 2.4.2.

cbrunos · Le 16/09/2011, à 16:02

ArchangeGabriel a écrit :

Ok, donc le problème est ici...
Je vais voir ce que je peux faire, ce sera certainement réglé par une version 2.4.2.

Ok super ^^
Je sais que c'est trop demander, mais crois-tu qu'elle sera disponible avant mardi?

ArchangeGabriel · Le 16/09/2011, à 16:03

Elle le sera sans aucun doute, à moins que d'un coup la buildfarm de launchpad soit remplie de tonnes de paquets prioritaires.

cbrunos · Le 16/09/2011, à 16:34

ArchangeGabriel a écrit :

Elle le sera sans aucun doute, à moins que d'un coup la buildfarm de launchpad soit remplie de tonnes de paquets prioritaires.

Et si j'installais Oneiric tu crois que ça changerait quelque chose? C'est peut-être un bug qui n'est que présent sur Natty?

ArchangeGabriel · Le 16/09/2011, à 16:37

Je ne pense pas, je fais les tests e je te tiens au courant. Notre code est pas forcément valide.

badjojo · Le 16/09/2011, à 16:54

Salut

Sur la liste des appels, en face du asus U36, Il y a marqué:
"The call to switch on the card works according to lspci and power consumption only"

Je ne comprend pas vraiment ce que cela veut dire, est ce que quelqu'un pourrait m'expliquer la signification de cette phrase?

Sinon merci pour votre travail, je sens que avec le retour de l'acpi, je vais bientot repasser sous Ubuntu

ArchangeGabriel · Le 16/09/2011, à 16:56

Cela signifie qu'ils pensent que l'appel pour allumer la carte marche, car d'après lspci cela la rallume bien, et ils observent une augmentation de la consommation, mais qu'il n'ont pas essayé de faire tourner un programme dessus.

badjojo · Le 16/09/2011, à 17:05

Ok bah je vais tacher de tester tout ça alors...

ArchangeGabriel · Le 16/09/2011, à 17:57

@cbrunos: Hum... Quelle version de bash est installée sur ton système ?

Chapal · Le 16/09/2011, à 18:40

Salut,
j'ai vu que quelqu'un avait eu le meme problème que moi (enfin le meme message d'erreur)

chapal@chapal-N61Jv ~ $ optirun glxspheres
The Bumblebee X server was not available, please check the
Bumblebee logfile at /var/log/bumblebee.log

a noter que j'avais installé ironhide (sur ma linux mint 11 toute fraiche) mais que ca ne marchait pas alors j'ai tout desinstallé et j'ai esayé bumblebee ...
je suis sur un Asus N61jv

Je veux bien un peu d'aide !
Merci beaucoup !!

voila mes logs:

[    248.67] Bumblebee log started at Fri, 16 Sep 2011 19:21:37 +0200
[    248.68] Creating fifo /var/run/bumblebee.fifo for communication...
[    248.72] Making FIFO writable for members of group bumblebee
[    248.73] Power management is disabled, not disabling card on start.
[    248.75] Waiting for orders
[    288.85] Checking for X server availability before stopping it...
[    288.86] The X server has not started or the pidfile is invalid.
[    288.87] X is stopped.
[    288.88] Power management is disabled, not unloading driver
[    288.89] Power management is disabled, card already enabled.
[    288.90] Bumblebee log ended on Fri, 16 Sep 2011 19:22:18 +0200
[     49.25] Bumblebee log started at Fri, 16 Sep 2011 19:23:37 +0200
[     49.25] Creating fifo /var/run/bumblebee.fifo for communication...
[     49.40] Making FIFO writable for members of group bumblebee
[     49.41] Power management is disabled, not disabling card on start.
[     49.41] Waiting for orders
[     94.30] Optirun start request received.
[     94.35] Checking for X server availability before starting X...
[     94.36] X server is not started
[     94.36] Power management is disabled, only loading driver
[     95.02] FATAL: Module nouveau is in use.
[     95.02]   insmod /lib/modules/2.6.38-8-generic/kernel/drivers/char/drm/nvidia-current.ko 
[     95.02]   FATAL: Error inserting nvidia_current (/lib/modules/2.6.38-8-generic/kernel/drivers/char/drm/nvidia-current.ko): No such device
[     95.02] The driver failed to load.
[     95.03] Waiting for orders
[    138.07] Optirun start request received.
[    138.08] Checking for X server availability before starting X...
[    138.08] X server is not started
[    138.09] Power management is disabled, only loading driver
[    138.42] FATAL: Module nouveau is in use.
[    138.42]   insmod /lib/modules/2.6.38-8-generic/kernel/drivers/char/drm/nvidia-current.ko 
[    138.42]   FATAL: Error inserting nvidia_current (/lib/modules/2.6.38-8-generic/kernel/drivers/char/drm/nvidia-current.ko): No such device
[    138.43] The driver failed to load.
[    138.44] Waiting for orders
[    264.90] Bumblebee log started at Fri, 16 Sep 2011 19:27:12 +0200
[    264.92] Creating fifo /var/run/bumblebee.fifo for communication...
[    264.93] Making FIFO writable for members of group bumblebee
[    264.94] Power management is disabled, not disabling card on start.
[    264.95] Waiting for orders
[    274.39] Checking for X server availability before stopping it...
[    274.40] The X server has not started or the pidfile is invalid.
[    274.41] X is stopped.
[    274.43] Power management is disabled, not unloading driver
[    274.44] Power management is disabled, card already enabled.
[    274.45] Bumblebee log ended on Fri, 16 Sep 2011 19:27:22 +0200
[    626.63] Bumblebee log started at Fri, 16 Sep 2011 19:33:14 +0200
[    626.64] Creating fifo /var/run/bumblebee.fifo for communication...
[    626.65] Making FIFO writable for members of group bumblebee
[    626.67] Power management is disabled, not disabling card on start.
[    626.68] Waiting for orders
[    637.94] Optirun start request received.
[    637.95] Checking for X server availability before starting X...
[    637.97] X server is not started
[    637.98] Power management is disabled, only loading driver
[    638.31] FATAL: Module nouveau is in use.
[    638.31]   insmod /lib/modules/2.6.38-8-generic/kernel/drivers/char/drm/nvidia-current.ko 
[    638.31]   FATAL: Error inserting nvidia_current (/lib/modules/2.6.38-8-generic/kernel/drivers/char/drm/nvidia-current.ko): No such device
[    638.32] The driver failed to load.
[    638.33] Waiting for orders
[    908.08] Optirun start request received.
[    908.09] Checking for X server availability before starting X...
[    908.10] X server is not started
[    908.11] Power management is disabled, only loading driver
[    908.46] FATAL: Module nouveau is in use.
[    908.46]   insmod /lib/modules/2.6.38-8-generic/kernel/drivers/char/drm/nvidia-current.ko 
[    908.46]   FATAL: Error inserting nvidia_current (/lib/modules/2.6.38-8-generic/kernel/drivers/char/drm/nvidia-current.ko): No such device
[    908.48] The driver failed to load.
[    908.49] Waiting for orders

[  1842.755] 
X.Org X Server 1.10.1
Release Date: 2011-04-15
[  1842.756] X Protocol Version 11, Revision 0
[  1842.756] Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
[  1842.756] Current Operating System: Linux chapal-N61Jv 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64
[  1842.756] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=6c4edfa1-549a-48b0-8032-b717f518d707 ro quiet splash vt.handoff=7
[  1842.756] Build Date: 11 August 2011  03:43:05PM
[  1842.756] xorg-server 2:1.10.1-1ubuntu1.2 (For technical support please see http://www.ubuntu.com/support) 
[  1842.756] Current version of pixman: 0.21.8
[  1842.756]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  1842.756] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1842.756] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Sep 16 19:13:52 2011
[  1842.756] (++) Using config file: "/etc/X11/xorg.conf.nvidia"
[  1842.756] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1842.756] (==) ServerLayout "Layout0"
[  1842.756] (**) |-->Screen "Screen0" (0)
[  1842.756] (**) |   |-->Monitor "Monitor0"
[  1842.756] (**) |   |-->Device "Device0"
[  1842.756] (**) Option "AutoAddDevices" "false"
[  1842.756] (**) Not automatically adding devices
[  1842.756] (==) Automatically enabling devices
[  1842.756] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1842.756]     Entry deleted from font path.
[  1842.756] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  1842.756]     Entry deleted from font path.
[  1842.756] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  1842.756]     Entry deleted from font path.
[  1842.757] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  1842.757]     Entry deleted from font path.
[  1842.757] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  1842.757]     Entry deleted from font path.
[  1842.757] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[  1842.757] (++) ModulePath set to "/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules"
[  1842.757] (**) Extension "Composite" is enabled
[  1842.757] (==) |-->Input Device "<default pointer>"
[  1842.757] (==) |-->Input Device "<default keyboard>"
[  1842.757] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
[  1842.757] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
[  1842.757] (II) Loader magic: 0x7e17e0
[  1842.757] (II) Module ABI versions:
[  1842.757]     X.Org ANSI C Emulation: 0.4
[  1842.757]     X.Org Video Driver: 10.0
[  1842.757]     X.Org XInput driver : 12.3
[  1842.757]     X.Org Server Extension : 5.0
[  1842.758] (--) PCI:*(0:0:2:0) 8086:0046:1043:1252 rev 18, Mem @ 0xe3400000/4194304, 0xc0000000/268435456, I/O @ 0x0000e080/8
[  1842.758] (--) PCI: (0:1:0:0) 10de:0a35:1043:1252 rev 162, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[  1842.758] (II) Open ACPI successful (/var/run/acpid.socket)
[  1842.758] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[  1842.758] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[  1842.758] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  1842.758] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[  1842.758] (II) "dri" will be loaded by default.
[  1842.758] (II) "dri2" will be loaded by default.
[  1842.758] (II) LoadModule: "dbe"
[  1842.758] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  1842.759] (II) Module dbe: vendor="X.Org Foundation"
[  1842.759]     compiled for 1.10.1, module version = 1.0.0
[  1842.759]     Module class: X.Org Server Extension
[  1842.759]     ABI class: X.Org Server Extension, version 5.0
[  1842.759] (II) Loading extension DOUBLE-BUFFER
[  1842.759] (II) LoadModule: "extmod"
[  1842.759] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  1842.759] (II) Module extmod: vendor="X.Org Foundation"
[  1842.759]     compiled for 1.10.1, module version = 1.0.0
[  1842.759]     Module class: X.Org Server Extension
[  1842.759]     ABI class: X.Org Server Extension, version 5.0
[  1842.759] (II) Loading extension MIT-SCREEN-SAVER
[  1842.759] (II) Loading extension XFree86-VidModeExtension
[  1842.759] (II) Loading extension XFree86-DGA
[  1842.759] (II) Loading extension DPMS
[  1842.759] (II) Loading extension XVideo
[  1842.759] (II) Loading extension XVideo-MotionCompensation
[  1842.759] (II) Loading extension X-Resource
[  1842.759] (II) LoadModule: "glx"
[  1842.759] (II) Loading /usr/lib/nvidia-current/xorg/libglx.so
[  1842.773] (II) Module glx: vendor="NVIDIA Corporation"
[  1842.773]     compiled for 4.0.2, module version = 1.0.0
[  1842.773]     Module class: X.Org Server Extension
[  1842.773] (II) NVIDIA GLX Module  285.03  Mon Aug 15 02:52:52 PDT 2011
[  1842.773] (II) Loading extension GLX
[  1842.773] (II) LoadModule: "record"
[  1842.773] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  1842.773] (II) Module record: vendor="X.Org Foundation"
[  1842.773]     compiled for 1.10.1, module version = 1.13.0
[  1842.773]     Module class: X.Org Server Extension
[  1842.773]     ABI class: X.Org Server Extension, version 5.0
[  1842.773] (II) Loading extension RECORD
[  1842.773] (II) LoadModule: "dri"
[  1842.773] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  1842.774] (II) Module dri: vendor="X.Org Foundation"
[  1842.774]     compiled for 1.10.1, module version = 1.0.0
[  1842.774]     ABI class: X.Org Server Extension, version 5.0
[  1842.774] (II) Loading extension XFree86-DRI
[  1842.774] (II) LoadModule: "dri2"
[  1842.774] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1842.774] (II) Module dri2: vendor="X.Org Foundation"
[  1842.774]     compiled for 1.10.1, module version = 1.2.0
[  1842.774]     ABI class: X.Org Server Extension, version 5.0
[  1842.774] (II) Loading extension DRI2
[  1842.774] (II) LoadModule: "nvidia"
[  1842.774] (II) Loading /usr/lib/nvidia-current/xorg/nvidia_drv.so
[  1842.774] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1842.774]     compiled for 4.0.2, module version = 1.0.0
[  1842.774]     Module class: X.Org Video Driver
[  1842.775] (II) LoadModule: "mouse"
[  1842.775] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[  1842.775] (II) Module mouse: vendor="X.Org Foundation"
[  1842.775]     compiled for 1.10.2.902, module version = 1.7.1
[  1842.775]     Module class: X.Org XInput Driver
[  1842.775]     ABI class: X.Org XInput driver, version 12.3
[  1842.775] (II) LoadModule: "kbd"
[  1842.775] (WW) Warning, couldn't open module kbd
[  1842.775] (II) UnloadModule: "kbd"
[  1842.775] (II) Unloading kbd
[  1842.775] (EE) Failed to load module "kbd" (module does not exist, 0)
[  1842.775] (II) NVIDIA dlloader X Driver  285.03  Mon Aug 15 02:35:33 PDT 2011
[  1842.775] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1842.775] (--) using VT number 7

[  1842.775] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[  1842.775] (II) Loading sub module "fb"
[  1842.775] (II) LoadModule: "fb"
[  1842.776] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1842.776] (II) Module fb: vendor="X.Org Foundation"
[  1842.776]     compiled for 1.10.1, module version = 1.0.0
[  1842.776]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1842.776] (II) Loading sub module "wfb"
[  1842.776] (II) LoadModule: "wfb"
[  1842.776] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1842.776] (II) Module wfb: vendor="X.Org Foundation"
[  1842.776]     compiled for 1.10.1, module version = 1.0.0
[  1842.776]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1842.776] (II) Loading sub module "ramdac"
[  1842.776] (II) LoadModule: "ramdac"
[  1842.776] (II) Module "ramdac" already built-in
[  1842.776] (II) Loading /usr/lib/nvidia-current/xorg/nvidia_drv.so
[  1842.776] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1842.776] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1842.776] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  1842.776] (==) NVIDIA(0): RGB weight 888
[  1842.776] (==) NVIDIA(0): Default visual is TrueColor
[  1842.776] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1842.776] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
[  1842.776] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
[  1843.710] (WW) NVIDIA(GPU-0): Invalid ConnectedMonitor request; request was for 'DFP-0', but
[  1843.710] (WW) NVIDIA(GPU-0):     the valid display devices are 'CRT-0'.
[  1843.715] (II) NVIDIA(0): NVIDIA GPU GeForce GT 325M (GT216) at PCI:1:0:0 (GPU-0)
[  1843.715] (--) NVIDIA(0): Memory: 1048576 kBytes
[  1843.715] (--) NVIDIA(0): VideoBIOS: 70.16.58.00.fe
[  1843.715] (II) NVIDIA(0): Detected PCI Express Link width: 1X
[  1843.715] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[  1843.715] (--) NVIDIA(0): Connected display device(s) on GeForce GT 325M at PCI:1:0:0
[  1843.715] (--) NVIDIA(0):     none
[  1843.717] (EE) NVIDIA(0): No display devices found for this X screen.
[  1843.734] (II) UnloadModule: "nvidia"
[  1843.734] (II) Unloading nvidia
[  1843.734] (II) UnloadModule: "wfb"
[  1843.734] (II) Unloading wfb
[  1843.734] (II) UnloadModule: "fb"
[  1843.734] (II) Unloading fb
[  1843.734] (EE) Screen(s) found, but none have a usable configuration.
[  1843.734] 
Fatal server error:
[  1843.734] no screens found
[  1843.734] 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[  1843.734] Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  1843.734] 
[  1843.734]  ddxSigGiveUp: Closing log

Dernière modification par Chapal (Le 16/09/2011, à 18:41)

ArchangeGabriel · Le 16/09/2011, à 18:57

@Chapal:

sudo gedit /etc/bumblebee/xorg.conf.nvidia

Puis remplaces DFP par CRT.

Chapal · Le 16/09/2011, à 19:08

wooow ca marche merci
de 59 fps a 1050 fps !!
de 31 Mpx/s a 82 Mpx/s

je vais tester minecraft de ce pas !!

EDIT: ca marche a merveille !!!

Dernière modification par Chapal (Le 16/09/2011, à 19:49)

cbrunos · Le 16/09/2011, à 19:44

ArchangeGabriel a écrit :

@cbrunos: Hum... Quelle version de bash est installée sur ton système ?

Version 4.2-0ubuntu3 en 64 bits.

badjojo · Le 16/09/2011, à 19:58

Re tout le monde

Donc sur le U36JC, bumblebee fonctionne bien, environ 20 fps avec glxspheres, 80 fps avec optirun glxspheres.

Niveau ACPI:

Les applications se lancent avec la carte nvidia sans problème, cependant , même si la baisse de consommation est sensible (de 30W à 16W), la consommation avec la carte intel reste autour de 16W, soit le double de la conso sous windows, qui tombe à 8W en mode normal (j'ai testé les deux avec seulement un navigateur ouvert, les mesures étant faites sous ubuntu avec l'applet gnome, windows avec l'analyseur de performances.)

Je vais essayer de diminuer ma conso sous ubuntu, mais y'a t-il des chances que la consommation puisse diminuer davantage au fil de l'évolution de bumblebee?

Encore un grand merci aux devs pour le travail accompli

Edit: Finalement je suis moins convaincu de l’arrêt de la carte graphique:
Un

optirun firefox

me donne le même taux de décharge (autour de 18W) qu'un

firefox

.
Par contre un

optirun glxspheres

me donne entre 30 et 40W, un

glxspheres

plutot 20W

Edit 2: J'ai peut être le meme problème que cbrunos:
Pas de réponse à

while read -r call; do echo "$call" done < /etc/bumblebee/cardoff

,

par contre

while read -r call; do echo "$call"; done < "/etc/bumblebee/cardoff"

fonctionne, et donne:

_SB.PCI0.PEG1.GFX0._OFF

Dernière modification par badjojo (Le 16/09/2011, à 20:36)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#351 Le 16/09/2011, à 14:44

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#352 Le 16/09/2011, à 14:54

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#353 Le 16/09/2011, à 15:04

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#354 Le 16/09/2011, à 15:11

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#355 Le 16/09/2011, à 15:42

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#356 Le 16/09/2011, à 15:46

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#357 Le 16/09/2011, à 15:47

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#358 Le 16/09/2011, à 15:49

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#359 Le 16/09/2011, à 15:50

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#360 Le 16/09/2011, à 15:52

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#361 Le 16/09/2011, à 15:59

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#362 Le 16/09/2011, à 16:00

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#363 Le 16/09/2011, à 16:02

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#364 Le 16/09/2011, à 16:03

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#365 Le 16/09/2011, à 16:34

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#366 Le 16/09/2011, à 16:37

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#367 Le 16/09/2011, à 16:54

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#368 Le 16/09/2011, à 16:56

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#369 Le 16/09/2011, à 17:05

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#370 Le 16/09/2011, à 17:57

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#371 Le 16/09/2011, à 18:40

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#372 Le 16/09/2011, à 18:57

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#373 Le 16/09/2011, à 19:08

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#374 Le 16/09/2011, à 19:44

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

#375 Le 16/09/2011, à 19:58

Re : Ordinateurs Portables - Technologie hybride (2 cartes) nVidia Optimus

Pied de page des forums