Ubuntu-fr

Shadow_max

Re : hvr1110 = hvr1100 + saa713x, installation ici

Salut. merci pou l'info. mais ou rajouter cette fréquence ?.
j-'ai essayer d'autre logiciel
avec kaffeine, le scan ne detecte aucune chaine. j'ai essayer de rajouter les chaines comme indique sur la documentation. mais rien ne s'affiche.

-me-tv ne detecte rien
-tvtime non plus.(ou presque un petit quelque chosemais apres le signal est perdu apres unpti truc apres sa disparait... ainsi de suite )

merci de m'aider.

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

Merci de lire ici :

http://forum.ubuntu-fr.org/viewtopic.ph … 29#p579329

bill78

Re : hvr1110 = hvr1100 + saa713x, installation ici

bonjour je sais que ce topic date d'il y quelques temps déjà, mais je me retrouve avec un pb similaire...
Voici mon dmesg en ayant suivi les infos ci-dessus...

bill@bill-desktop:~$ dmesg | grep saa
[   47.287785] saa7130/34: v4l2 driver version 0.2.14 loaded
[   47.287847] saa7133[0]: found at 0000:03:04.0, rev: 209, irq: 16, latency: 84, mmio: 0xfdbff000
[   47.287853] saa7133[0]: subsystem: 16be:000e, board: UNKNOWN/GENERIC [card=0,autodetected]
[   47.287865] saa7133[0]: board init: gpio is 0
[   47.439449] saa7133[0]: i2c eeprom 00: be 16 0e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   47.439460] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[   47.439469] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2a 02 51 96 2b
[   47.439478] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[   47.439487] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 00 c0 1c fd 79 44 9f c2 8f
[   47.439496] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439504] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439513] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439522] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439531] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439540] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439548] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439557] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439566] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439575] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.439583] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   47.445089] saa7133[0]: registered device video0 [v4l2]
[   47.445109] saa7133[0]: registered device vbi0
[   47.758186] saa7134_alsa: disagrees about version of symbol saa7134_tvaudio_setmute
[   47.758190] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[   47.758312] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[   47.758314] saa7134_alsa: Unknown symbol saa_dsp_writel
[   47.758464] saa7134_alsa: disagrees about version of symbol videobuf_dma_free
[   47.758466] saa7134_alsa: Unknown symbol videobuf_dma_free
[   47.758619] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_alloc
[   47.758621] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[   47.758664] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_build
[   47.758666] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[   47.758702] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_free
[   47.758704] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[   47.758740] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[   47.758742] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[   47.758856] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[   47.758858] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[   47.758942] saa7134_alsa: disagrees about version of symbol videobuf_dma_init
[   47.758944] saa7134_alsa: Unknown symbol videobuf_dma_init
[   47.759067] saa7134_alsa: disagrees about version of symbol videobuf_dma_init_kernel
[   47.759069] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[   47.759166] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[   47.759282] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[   47.759324] saa7134_alsa: disagrees about version of symbol saa7134_set_dmabits
[   47.759326] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[  195.825016] saa7130/34: v4l2 driver version 0.2.14 loaded
[  195.825076] saa7133[0]: found at 0000:03:04.0, rev: 209, irq: 16, latency: 84, mmio: 0xfdbff000
[  195.825084] saa7133[0]: subsystem: 16be:000e, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option]
[  195.825093] saa7133[0]: board init: gpio is 0
[  195.973882] saa7133[0]: i2c eeprom 00: be 16 0e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  195.973900] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[  195.973912] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2a 02 51 96 2b
[  195.973927] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[  195.973943] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 00 c0 1c fd 79 44 9f c2 8f
[  195.973958] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.973974] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.973990] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.974006] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.974022] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.974038] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.974053] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.974069] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.974085] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.974101] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  195.974117] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  196.081707] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[  196.084599] saa7133[0]: warning: unknown hauppauge model #0
[  196.084601] saa7133[0]: hauppauge eeprom: model=0
[  200.112049] saa7133[0]: registered device video0 [v4l2]
[  200.112080] saa7133[0]: registered device vbi0
[  200.112102] saa7133[0]: registered device radio0
[  200.180106] saa7134_alsa: disagrees about version of symbol saa7134_tvaudio_setmute
[  200.180111] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[  200.180257] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[  200.180259] saa7134_alsa: Unknown symbol saa_dsp_writel
[  200.180434] saa7134_alsa: disagrees about version of symbol videobuf_dma_free
[  200.180436] saa7134_alsa: Unknown symbol videobuf_dma_free
[  200.180626] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_alloc
[  200.180628] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[  200.180676] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_build
[  200.180679] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[  200.180719] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_free
[  200.180721] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[  200.180761] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[  200.180764] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[  200.180903] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[  200.180905] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[  200.181005] saa7134_alsa: disagrees about version of symbol videobuf_dma_init
[  200.181007] saa7134_alsa: Unknown symbol videobuf_dma_init
[  200.181158] saa7134_alsa: disagrees about version of symbol videobuf_dma_init_kernel
[  200.181160] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[  200.181274] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[  200.181422] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[  200.181468] saa7134_alsa: disagrees about version of symbol saa7134_set_dmabits
[  200.181470] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[  200.238330] DVB: registering new adapter (saa7133[0])
bill@bill-desktop:~$

pour info quand je fais un scan, il ne trouve rien...

bill@bill-desktop:~$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 474000000 0 2 9 3 1 0 0
initial transponder 498000000 0 2 9 3 1 0 0
initial transponder 522000000 0 2 9 3 1 0 0
initial transponder 562000000 0 2 9 3 1 0 0
initial transponder 586000000 0 3 9 3 1 2 0
>>> tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 586000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 586000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

voilà j'espère que ça fera réagir qqun et merci d'avance....

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

1) Il y a effectivement un problème de compilation des pilotes v4l sous hardy

[   47.758704] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[   47.758740] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[   47.758742] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[   47.758856] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[   47.758858] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[   47.758942] saa7134_alsa: disagrees about version of symbol videobuf_dma_init
[   47.758944] saa7134_alsa: Unknown symbol videobuf_dma_init
[   47.759067] saa7134_alsa: disagrees about version of symbol videobuf_dma_init_kernel
[   47.759069] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel

voir ici : http://linuxtv.org/v4lwiki/index.php/Ho … _Mercurial

2) une fois qu'il n'y aura plus d'erreur de chargement des modules :

initial transponder 474000000 0 2 9 3 1 0 0

il faut rajouter +166 KHz aux fréquences : voir 2 posts au dessus

Xarkam

Re : hvr1110 = hvr1100 + saa713x, installation ici

Avec une Ubuntu 8.04-64 up to date:

xarkam@HYKSOS:~$ dmesg | grep saa
[   33.130792] saa7130/34: v4l2 driver version 0.2.14 loaded
[   33.130869] saa7133[0]: found at 0000:05:06.0, rev: 209, irq: 21, latency: 64, mmio: 0xfebff800
[   33.130876] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[   33.130885] saa7133[0]: board init: gpio is 6400000
[   33.277082] ir-kbd-i2c: HVR 1110 detected at i2c-1/1-0071/ir0 [saa7133[0]]
[   33.309019] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   33.309024] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   33.309028] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[   33.309033] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   33.309036] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[   33.309040] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.309044] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.309048] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   33.428936] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[   33.739115] saa7133[0]: registered device video0 [v4l2]
[   33.739129] saa7133[0]: registered device vbi0
[   33.739143] saa7133[0]: registered device radio0
[   33.764536] saa7134 ALSA driver for DMA sound loaded
[   33.764561] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 21 registered as card -2
[   33.893207] DVB: registering new adapter (saa7133[0])

Donc, je ne pense pas qu'il y a encore des soucis de v4l2 dans hardy.

On peux m'expliquer clairement la marche à suivre pour avoir le son svp ?

Dernière modification par Xarkam (Le 25/06/2008, à 20:23)

---

Osames Manager
---
Asus Rampage V Extrême | Intel i7 5820K | Corsair 16GB DDR4 | NVIDIA GeForce 770GTX
Utilisateur d'Ubuntu, Debian, et Windows

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

arecord -l

....

Xarkam

Re : hvr1110 = hvr1100 + saa713x, installation ici

xarkam@HYKSOS:~$ arecord -l
**** Liste des CAPTURE périphériques ****
carte  0: SB [HDA ATI SB], périphérique 0 : AD198x Analog [AD198x Analog]
  Sous-périphériques: 3/3
  Sous-périphérique: #0: subdevice #0
  Sous-périphérique: #1: subdevice #1
  Sous-périphérique: #2: subdevice #2
carte  1: SAA7134 [SAA7134], périphérique 0 : SAA7134 PCM [SAA7134 PCM]
  Sous-périphériques: 1/1
  Sous-périphérique: #0: subdevice #0

Et quant je fait

xarkam@HYKSOS:~$ arecord -D hw:1,0 -c 2 -r 48000 -f S16_LE -t wav | aplay -
Enregistrement en cours WAVE 'stdin' : Signed 16 bit Little Endian, Taux 48000 Hz, Stéréo
Lecture en cours WAVE 'stdin' : Signed 16 bit Little Endian, Taux 48000 Hz, Stéréo
souscharge!!! (long de 0,015 ms au minimum)
souscharge!!! (long de 0,004 ms au minimum)
souscharge!!! (long de 0,005 ms au minimum)
souscharge!!! (long de 0,005 ms au minimum)
souscharge!!! (long de 0,004 ms au minimum)

A chaque message souscharge!!! (long de 0,xxx ms au minimum) j'ai une micro coupure du son.

Dernière modification par Xarkam (Le 26/06/2008, à 11:40)

---

Osames Manager
---
Asus Rampage V Extrême | Intel i7 5820K | Corsair 16GB DDR4 | NVIDIA GeForce 770GTX
Utilisateur d'Ubuntu, Debian, et Windows

Xarkam

Re : hvr1110 = hvr1100 + saa713x, installation ici

Bon avec un

arecord -D hw:1,0 -t wav | aplay -

Je n'ai plus de coupures.

---

Osames Manager
---
Asus Rampage V Extrême | Intel i7 5820K | Corsair 16GB DDR4 | NVIDIA GeForce 770GTX
Utilisateur d'Ubuntu, Debian, et Windows

eblues

Re : hvr1110 = hvr1100 + saa713x, installation ici

bonjour

j'ai essayé de faire comme vous aviez indiqué pour installation sous hardy mais j'ai toujour le meme problème avec le chargement des module saa7134_alsa

voici mon  dmesg | grep saa

[   40.466836] saa7130/34: v4l2 driver version 0.2.14 loaded
[   40.466907] saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 21, latency: 64, mmio: 0xdbeff800
[   40.466912] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[   40.466920] saa7133[0]: board init: gpio is 6400000
[   40.627171] ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
[   40.674889] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   40.674898] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   40.674906] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[   40.674914] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   40.674921] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[   40.674929] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   40.674936] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   40.674943] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   40.674950] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 6a 2a 0e f0 73 05 29 00
[   40.674958] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[   40.674965] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[   40.674973] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 9c 00 00 00 00 00 00 00 00 00
[   40.674980] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   40.674987] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   40.674994] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   40.675002] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   40.949648] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[   40.952545] saa7133[0]: hauppauge eeprom: model=67019
[   45.001266] saa7133[0]: registered device video0 [v4l2]
[   45.001359] saa7133[0]: registered device vbi0
[   45.001455] saa7133[0]: registered device radio0
[   45.097409] saa7134_alsa: disagrees about version of symbol saa7134_tvaudio_setmute
[   45.097413] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[   45.097532] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[   45.097533] saa7134_alsa: Unknown symbol saa_dsp_writel
[   45.097676] saa7134_alsa: disagrees about version of symbol videobuf_dma_free
[   45.097678] saa7134_alsa: Unknown symbol videobuf_dma_free
[   45.097818] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_alloc
[   45.097820] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[   45.097860] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_build
[   45.097861] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[   45.097895] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_free
[   45.097897] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[   45.097931] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[   45.097933] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[   45.098037] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[   45.098039] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[   45.098115] saa7134_alsa: disagrees about version of symbol videobuf_dma_init
[   45.098117] saa7134_alsa: Unknown symbol videobuf_dma_init
[   45.098229] saa7134_alsa: disagrees about version of symbol videobuf_dma_init_kernel
[   45.098231] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[   45.098315] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[   45.098418] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[   45.098456] saa7134_alsa: disagrees about version of symbol saa7134_set_dmabits
[   45.098458] saa7134_alsa: Unknown symbol saa7134_set_dmabits
[   45.229254] DVB: registering new adapter (saa7133[0])
[  169.040712] saa7134_alsa: disagrees about version of symbol saa7134_tvaudio_setmute
[  169.040720] saa7134_alsa: Unknown symbol saa7134_tvaudio_setmute
[  169.040931] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[  169.040934] saa7134_alsa: Unknown symbol saa_dsp_writel
[  169.041200] saa7134_alsa: disagrees about version of symbol videobuf_dma_free
[  169.041203] saa7134_alsa: Unknown symbol videobuf_dma_free
[  169.041470] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_alloc
[  169.041473] saa7134_alsa: Unknown symbol saa7134_pgtable_alloc
[  169.041547] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_build
[  169.041550] saa7134_alsa: Unknown symbol saa7134_pgtable_build
[  169.041613] saa7134_alsa: disagrees about version of symbol saa7134_pgtable_free
[  169.041616] saa7134_alsa: Unknown symbol saa7134_pgtable_free
[  169.041680] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_init
[  169.041683] saa7134_alsa: Unknown symbol saa7134_dmasound_init
[  169.041883] saa7134_alsa: disagrees about version of symbol saa7134_dmasound_exit
[  169.041886] saa7134_alsa: Unknown symbol saa7134_dmasound_exit
[  169.042028] saa7134_alsa: disagrees about version of symbol videobuf_dma_init
[  169.042031] saa7134_alsa: Unknown symbol videobuf_dma_init
[  169.042253] saa7134_alsa: disagrees about version of symbol videobuf_dma_init_kernel
[  169.042256] saa7134_alsa: Unknown symbol videobuf_dma_init_kernel
[  169.042412] saa7134_alsa: Unknown symbol videobuf_pci_dma_unmap
[  169.042609] saa7134_alsa: Unknown symbol videobuf_pci_dma_map
[  169.042681] saa7134_alsa: disagrees about version of symbol saa7134_set_dmabits
[  169.042684] saa7134_alsa: Unknown symbol saa7134_set_dmabits
alex@alex-desktop:~$

si quelqu'un peut m'aider

merci

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

lire 5 posts au dessus.

rechercher des modules identiques se nommant saa7134* et les supprimer puis réinstaller v4l

eblues

Re : hvr1110 = hvr1100 + saa713x, installation ici

j'ai enlever comme vous me l'avez dit les module du dernier kernel saa7134*
puis j'ai refait la manip depuis le debut et mainteant j'ai plus du tout de saa7134
dmesg | grep saa
[   42.319574] saa7130/34: v4l2 driver version 0.2.14 loaded
[   42.319634] saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 21, latency: 64, mmio: 0xdbeff800
[   42.319640] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[   42.319647] saa7133[0]: board init: gpio is 6400000
[   42.480556] ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
[   42.538884] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   42.538893] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   42.538901] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[   42.538909] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   42.538916] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[   42.538924] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.538931] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.538938] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.538983] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 6a 2a 0e f0 73 05 29 00
[   42.538991] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[   42.538998] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[   42.539006] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 9c 00 00 00 00 00 00 00 00 00
[   42.539013] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.539021] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.539028] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.539035] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.620402] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[   42.623266] saa7133[0]: hauppauge eeprom: model=67019
[   46.684761] saa7133[0]: registered device video0 [v4l2]
[   46.684866] saa7133[0]: registered device vbi0
[   46.684973] saa7133[0]: registered device radio0
[   46.844212] DVB: registering new adapter (saa7133[0])
[  168.850996] saa7127: Unknown symbol v4l2_chip_match_i2c_client
[  168.851113] saa7127: Unknown symbol v4l2_chip_ident_i2c_client
[  168.852237] saa717x: Unknown symbol v4l2_chip_match_i2c_client
[  168.885862] saa7115: Unknown symbol v4l2_ctrl_query_fill_std
[  168.885985] saa7115: Unknown symbol v4l2_chip_match_i2c_client
[  168.886113] saa7115: Unknown symbol v4l2_i2c_attach
[  168.886167] saa7115: Unknown symbol v4l2_chip_ident_i2c_client
[  168.892537] saa6752hs: Unknown symbol v4l2_ctrl_query_fill_std
[  168.892712] saa6752hs: Unknown symbol v4l2_ctrl_query_fill
[  168.892814] saa6752hs: Unknown symbol v4l2_ctrl_query_menu
[  168.892865] saa6752hs: Unknown symbol v4l2_ctrl_get_menu
[  169.213929] saa5246a: Unknown symbol video_exclusive_open
[  169.214092] saa5246a: Unknown symbol video_devdata
[  169.214220] saa5246a: Unknown symbol video_unregister_device
[  169.214276] saa5246a: Unknown symbol video_device_alloc
[  169.214326] saa5246a: Unknown symbol video_register_device
[  169.214393] saa5246a: Unknown symbol video_usercopy
[  169.214443] saa5246a: Unknown symbol video_device_release
[  169.214494] saa5246a: Unknown symbol video_exclusive_release
[  169.347085] saa7134: Unknown symbol videobuf_streamoff
[  169.347182] saa7134: Unknown symbol ir_codes_pinnacle_color
[  169.347233] saa7134: Unknown symbol videobuf_poll_stream
[  169.347283] saa7134: Unknown symbol video_ioctl2
[  169.347335] saa7134: Unknown symbol ir_codes_avermedia
[  169.347465] saa7134: Unknown symbol v4l2_prio_max
[  169.347517] saa7134: Unknown symbol ir_codes_flydvb
[  169.347567] saa7134: Unknown symbol videobuf_dma_free
[  169.347670] saa7134: Unknown symbol v4l2_prio_change
[  169.347720] saa7134: Unknown symbol videobuf_reqbufs
[  169.347772] saa7134: Unknown symbol ir_codes_genius_tvgo_a11mce
[  169.347826] saa7134: Unknown symbol ir_codes_gotview7135
[  169.347878] saa7134: Unknown symbol ir_codes_encore_enltv
[  169.347970] saa7134: Unknown symbol ir_codes_behold
[  169.348020] saa7134: Unknown symbol videobuf_waiton
[  169.348089] saa7134: Unknown symbol ir_codes_behold_columbus
[  169.348154] saa7134: Unknown symbol ir_codes_proteus_2309
[  169.348223] saa7134: Unknown symbol ir_codes_flyvideo
[  169.348277] saa7134: Unknown symbol videobuf_dqbuf
[  169.348328] saa7134: Unknown symbol ir_codes_eztv
[  169.348465] saa7134: Unknown symbol ir_codes_pixelview
[  169.348543] saa7134: Unknown symbol ir_codes_avermedia_a16d
[  169.348652] saa7134: Unknown symbol ir_rc5_timer_keyup
[  169.348701] saa7134: Unknown symbol v4l2_type_names
[  169.348751] saa7134: Unknown symbol v4l2_field_names
[  169.348801] saa7134: Unknown symbol videobuf_stop
[  169.348852] saa7134: Unknown symbol ir_codes_asus_pc39
[  169.348903] saa7134: Unknown symbol get_key_pinnacle_color
[  169.348957] saa7134: Unknown symbol v4l2_prio_check
[  169.349010] saa7134: Unknown symbol ir_extract_bits
[  169.349061] saa7134: Unknown symbol ir_rc5_timer_end
[  169.349124] saa7134: Unknown symbol videobuf_queue_sg_init
[  169.349174] saa7134: Unknown symbol videobuf_dma_unmap
[  169.349226] saa7134: Unknown symbol videobuf_read_stream
[  169.349294] saa7134: Unknown symbol videobuf_querybuf
[  169.349345] saa7134: Unknown symbol ir_input_init
[  169.349396] saa7134: Unknown symbol v4l2_prio_close
[  169.349446] saa7134: Unknown symbol video_unregister_device
[  169.349496] saa7134: Unknown symbol videobuf_qbuf
[  169.349545] saa7134: Unknown symbol v4l2_prio_init
[  169.349615] saa7134: Unknown symbol video_device_alloc
[  169.349665] saa7134: Unknown symbol videobuf_read_one
[  169.349731] saa7134: Unknown symbol get_key_pinnacle_grey
[  169.349796] saa7134: Unknown symbol video_register_device
[  169.349890] saa7134: Unknown symbol ir_codes_cinergy
[  169.349942] saa7134: Unknown symbol ir_input_nokey
[  169.350037] saa7134: Unknown symbol ir_codes_videomate_tv_pvr
[  169.350111] saa7134: Unknown symbol videobuf_iolock
[  169.350163] saa7134: Unknown symbol ir_codes_hauppauge_new
[  169.350223] saa7134: Unknown symbol videobuf_streamon
[  169.350283] saa7134: Unknown symbol v4l2_prio_open
[  169.350339] saa7134: Unknown symbol ir_codes_pinnacle_grey
[  169.350431] saa7134: Unknown symbol v4l2_chip_match_host
[  169.350482] saa7134: Unknown symbol ir_codes_purpletv
[  169.350563] saa7134: Unknown symbol video_device_release
[  169.350613] saa7134: Unknown symbol videobuf_mmap_mapper
[  169.350665] saa7134: Unknown symbol ir_codes_pctv_sedna
[  169.350720] saa7134: Unknown symbol ir_input_keydown
[  169.350774] saa7134: Unknown symbol videobuf_cgmbuf
[  169.350825] saa7134: Unknown symbol ir_codes_manli
[  169.350939] saa7134: Unknown symbol videobuf_to_dma
[  169.350989] saa7134: Unknown symbol videobuf_mmap_free
[  169.358484] saa5249: Unknown symbol video_exclusive_open
[  169.358658] saa5249: Unknown symbol video_devdata
[  169.358785] saa5249: Unknown symbol video_unregister_device
[  169.358847] saa5249: Unknown symbol video_register_device
[  169.358915] saa5249: Unknown symbol video_usercopy
[  169.358965] saa5249: Unknown symbol video_exclusive_release
[  169.474711] saa7146_vv: Unknown symbol videobuf_streamoff
[  169.474777] saa7146_vv: Unknown symbol videobuf_poll_stream
[  169.474870] saa7146_vv: Unknown symbol videobuf_dma_free
[  169.474920] saa7146_vv: Unknown symbol videobuf_reqbufs
[  169.474980] saa7146_vv: Unknown symbol v4l_compat_translate_ioctl
[  169.475035] saa7146_vv: Unknown symbol videobuf_waiton
[  169.475099] saa7146_vv: Unknown symbol videobuf_dqbuf
[  169.475210] saa7146_vv: Unknown symbol v4l2_video_std_construct
[  169.475273] saa7146_vv: Unknown symbol v4l2_field_names
[  169.475323] saa7146_vv: Unknown symbol videobuf_stop
[  169.475373] saa7146_vv: Unknown symbol videobuf_queue_sg_init
[  169.475424] saa7146_vv: Unknown symbol videobuf_dma_unmap
[  169.475520] saa7146_vv: Unknown symbol videobuf_read_stream
[  169.475588] saa7146_vv: Unknown symbol videobuf_querybuf
[  169.475670] saa7146_vv: Unknown symbol video_unregister_device
[  169.475720] saa7146_vv: Unknown symbol videobuf_qbuf
[  169.475775] saa7146_vv: Unknown symbol video_device_alloc
[  169.475875] saa7146_vv: Unknown symbol videobuf_read_one
[  169.475956] saa7146_vv: Unknown symbol video_register_device
[  169.476068] saa7146_vv: Unknown symbol videobuf_iolock
[  169.476126] saa7146_vv: Unknown symbol videobuf_streamon
[  169.476182] saa7146_vv: Unknown symbol videobuf_queue_cancel
[  169.476236] saa7146_vv: Unknown symbol videobuf_mmap_setup
[  169.476301] saa7146_vv: Unknown symbol video_usercopy
[  169.476351] saa7146_vv: Unknown symbol video_device_release
[  169.476401] saa7146_vv: Unknown symbol videobuf_mmap_mapper
[  169.476461] saa7146_vv: Unknown symbol videobuf_to_dma
[  169.583910] hexium_gemini: Unknown symbol saa7146_vv_init
[  169.584013] hexium_gemini: Unknown symbol saa7146_vv_release
[  169.584193] hexium_gemini: Unknown symbol saa7146_unregister_device
[  169.584259] hexium_gemini: Unknown symbol saa7146_register_device
[  169.596735] dpc7146: Unknown symbol saa7146_vv_init
[  169.596862] dpc7146: Unknown symbol saa7146_vv_release
[  169.597000] dpc7146: Unknown symbol saa7146_unregister_device
[  169.597067] dpc7146: Unknown symbol saa7146_register_device
[  169.646529] hexium_orion: Unknown symbol saa7146_vv_init
[  169.646631] hexium_orion: Unknown symbol saa7146_vv_release
[  169.646813] hexium_orion: Unknown symbol saa7146_unregister_device
[  169.646879] hexium_orion: Unknown symbol saa7146_register_device
[  169.648303] mxb: Unknown symbol saa7146_vv_init
[  169.648431] mxb: Unknown symbol saa7146_vv_release
[  169.648567] mxb: Unknown symbol saa7146_unregister_device
[  169.648633] mxb: Unknown symbol saa7146_register_device
[  169.648784] mxb: Unknown symbol saa7146_set_hps_source_and_sync
[  309.102817] saa7130/34: v4l2 driver version 0.2.14 loaded
[  309.102860] saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 21, latency: 64, mmio: 0xdbeff800
[  309.102866] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[  309.102874] saa7133[0]: board init: gpio is 6400000
[  309.250903] ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
[  309.302821] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  309.302832] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[  309.302839] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[  309.302847] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  309.302854] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[  309.302862] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302869] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302877] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302884] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 6a 2a 0e f0 73 05 29 00
[  309.302891] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[  309.302899] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[  309.302906] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 9c 00 00 00 00 00 00 00 00 00
[  309.302913] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302920] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302928] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302935] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.350849] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[  309.353750] saa7133[0]: hauppauge eeprom: model=67019
[  313.398902] saa7133[0]: registered device video0 [v4l2]
[  313.398932] saa7133[0]: registered device vbi0
[  313.398957] saa7133[0]: registered device radio0
[  313.529887] DVB: registering new adapter (saa7133[0])
alex@alex-desktop:~/v4l-dvb$

voila
merci de votre aide mais je crois que j'en ai encore un peu besoin

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

ok là c'est bon

[  309.102817] saa7130/34: v4l2 driver version 0.2.14 loaded
[  309.102860] saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 21, latency: 64, mmio: 0xdbeff800
[  309.102866] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[  309.102874] saa7133[0]: board init: gpio is 6400000
[  309.250903] ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
[  309.302821] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  309.302832] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[  309.302839] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[  309.302847] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  309.302854] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[  309.302862] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302869] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302877] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302884] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 6a 2a 0e f0 73 05 29 00
[  309.302891] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[  309.302899] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[  309.302906] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 9c 00 00 00 00 00 00 00 00 00
[  309.302913] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302920] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302928] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.302935] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  309.350849] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[  309.353750] saa7133[0]: hauppauge eeprom: model=67019
[  313.398902] saa7133[0]: registered device video0 [v4l2]
[  313.398932] saa7133[0]: registered device vbi0
[  313.398957] saa7133[0]: registered device radio0
[  313.529887] DVB: registering new adapter (saa7133[0])

Visiblement plus d'erreur de chargement

reboot complet et de nouveau dmesg pour voir

eblues

Re : hvr1110 = hvr1100 + saa713x, installation ici

voici apres un reboot

dmesg | grep saa
[   40.888311] saa7130/34: v4l2 driver version 0.2.14 loaded
[   41.063815] saa7133[0]: found at 0000:01:02.0, rev: 209, irq: 21, latency: 64, mmio: 0xdbeff800
[   41.063820] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[   41.063828] saa7133[0]: board init: gpio is 6400000
[   41.214110] ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
[   41.262026] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   41.262041] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   41.262054] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[   41.262068] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   41.262082] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[   41.262095] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   41.262109] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   41.262126] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   41.262133] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 6a 2a 0e f0 73 05 29 00
[   41.262140] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[   41.262148] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[   41.262155] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 9c 00 00 00 00 00 00 00 00 00
[   41.262162] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   41.262169] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   41.262176] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   41.262184] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   41.385931] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[   41.389315] saa7133[0]: hauppauge eeprom: model=67019
[   45.442216] saa7133[0]: registered device video0 [v4l2]
[   45.442318] saa7133[0]: registered device vbi0
[   45.442424] saa7133[0]: registered device radio0
[   45.709575] DVB: registering new adapter (saa7133[0])

plus du tout de saa7134 malgré un sudo modprobe saa7134

si vous avez une solution merci d'avance

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

Mai si ...
tout va bien

saa7134 gère aussi les chips saa7133, saa7133E et saa7134.

reste plus qu'à tester pour les chaînes.
Bon courage

eblues

Re : hvr1110 = hvr1100 + saa713x, installation ici

je teste demain matin et je vous reponds

merci pour votre aide

bjm

Re : hvr1110 = hvr1100 + saa713x, installation ici

Bonjour à tous
Je viens d'installer ubuntu 8.04 , j'ai remarqué que le paquetage kaffeine-xine a disparu .
Sous kaffeine j'ai le son des chaines mais pas l'image, l'écran est bleu
Quelqu'un a eu t'il ce problème

diouf76

Re : hvr1110 = hvr1100 + saa713x, installation ici

Bonjour.

J'ai un petit probleme je n'arrive pas a scanner mes chaines.

quand je fais un dmesg | grep saa  j'ai cela

953.733097] saa7130/34: v4l2 driver version 0.2.14 loaded
[  953.733146] saa7133[0]: found at 0000:01:0a.0, rev: 209, irq: 19, latency: 64, mmio: 0xdbfff800
[  953.733152] saa7133[0]: subsystem: 0070:6701, board: Pinnacle PCTV 310i [card=101,insmod option]
[  953.733161] saa7133[0]: board init: gpio is 6600000
[  953.905424] tuner 2-004b: chip found @ 0x96 (saa7133[0])
[  954.250297] ir-kbd-i2c: Pinnacle PCTV detected at i2c-2/2-0071/ir0 [saa7133[0]]
[  954.282240] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  954.282251] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[  954.282258] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[  954.282263] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  954.282268] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[  954.282272] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  954.282283] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  954.282294] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  956.211432] saa7133[0]: registered device video0 [v4l2]
[  956.211450] saa7133[0]: registered device vbi0
[  956.211465] saa7133[0]: registered device radio0
[  956.251953] saa7134 ALSA driver for DMA sound loaded
[  956.251998] saa7133[0]/alsa: saa7133[0] at 0xdbfff800 irq 19 registered as card -2

comme vous pouvez le voir il me reconnait la carte comme une pinnacle alors que j ai une hauppauge hvr-1110.

Que faire?

Merci d'avance de votre reponse.

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

saa7133[0]: subsystem: 0070:6701, board: Pinnacle PCTV 310i [card=101,insmod option]

normal a piori car tu as passé un argument du type card=101 dans un des fichiers de configuration.
Enlève ce paramètre et redémarre, tout devait rentrer dans l'ordre

fucce

Re : hvr1110 = hvr1100 + saa713x, installation ici

Bonjour à tous,
j'ai besoin de votre aide... j'ai une carte Hauppauge Nova-T PCI et ubuntu Hardy Heron, depuis je ne sais combien de temps, il m'est impossible de capter les chaines TNT du transpondeur R1 alors que ma télé les reçoit parfaitement bien! Je ne sais pourquoi?!? Vu que j'ai fait toutes les mises à jour dont les changements de noyaux, j'ai réinstaller v4l mais sans succès! Un petit aperçu de dmesg | grep cx88

[   56.566330] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[   56.566585] cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected]
[   56.566590] cx88[0]: TV tuner type 4, Radio tuner type -1
[   56.621068] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[   56.715761] cx88[0]: hauppauge eeprom: model=90002
[   56.716049] input: cx88 IR (Hauppauge Nova-T DVB-T as /devices/pci0000:00/0000:00:0a.0/input/input6
[   56.749151] cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 17, latency: 32, mmio: 0xde000000
[   56.749299] cx88[0]/0: registered device video0 [v4l2]
[   56.749355] cx88[0]/0: registered device vbi0
[   56.749425] cx88[0]/2: cx2388x 8802 Driver Manager
[   56.749460] cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 17, latency: 32, mmio: 0xdf000000
[   57.333929] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[   57.333940] cx88/2: registering cx8802 driver, type: dvb access: shared
[   57.333946] cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
[   57.333951] cx88[0]/2: cx2388x based DVB/ATSC card
[   58.897125] DVB: registering new adapter (cx88[0])

Lors d'un scan manuel de mes frequences, j'ai ce genre de message :

fucce@fucce-desktop:~$ scan freq.txt  > channels.conf
scanning freq.txt
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 498167000 0 2 9 3 1 0 0
initial transponder 506167000 0 2 9 3 1 0 0
initial transponder 522167000 0 2 9 3 1 0 0
initial transponder 530167000 0 2 9 3 1 0 0
initial transponder 658167000 0 2 9 3 1 0 0
initial transponder 802167000 0 2 9 3 1 0 0
initial transponder 818000000 0 2 9 3 1 0 0
>>> tune to: 498167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0601: pmt_pid 0x0064 SMR6 -- TF1 (running)
0x0000 0x0602: pmt_pid 0x00c8 SMR6 -- NRJ12 (running)
0x0000 0x0604: pmt_pid 0x0190 SMR6 -- Eurosport France (running, scrambled)
0x0000 0x0603: pmt_pid 0x012c SMR6 -- LCI (running, scrambled)
0x0000 0x0606: pmt_pid 0x0258 SMR6 -- TMC (running)
Network Name 'R�seau Num�rique Terrestre Fran�ais'
>>> tune to: 506167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0404: pmt_pid 0x019a MULTI4 -- PARIS PREMIERE (running)
0x0000 0x0405: pmt_pid 0x01fe MULTI4 -- TF6 (running, scrambled)
0x0000 0x0401: pmt_pid 0x006e MULTI4 -- M6 (running)
0x0000 0x0402: pmt_pid 0x00d2 MULTI4 -- W9 (running)
0x0000 0x0403: pmt_pid 0x0136 MULTI4 -- NT1 (running)
0x0000 0x0406: pmt_pid 0x0262 MULTI4 -- AB1 (running, scrambled)
Network Name 'r�seau num�rique terrestre fran�ais'
>>> tune to: 522167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 522167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 658167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0201: pmt_pid 0x0000 NTN -- Direct 8 (running)
0x0000 0x0203: pmt_pid 0x0000 NTN -- BFM TV (running)
0x0000 0x0204: pmt_pid 0x0000 NTN -- i>TELE (running)
0x0000 0x0205: pmt_pid 0x0000 NTN -- Virgin 17 (running)
0x0000 0x0206: pmt_pid 0x0000 NTN -- Gulli (running)
0x0000 0x0207: pmt_pid 0x0000 NTN -- France 4 (running)
WARNING: filter timeout pid 0x0010
>>> tune to: 802167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: -10:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
__tune_to_transponder:1483: ERROR: Setting frontend parameters failed: 22 Invalid argument
>>> tune to: -10:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
__tune_to_transponder:1483: ERROR: Setting frontend parameters failed: 22 Invalid argument
dumping lists (19 services)
Done.

J'ai aussi essayer la commande tzap sur mon ancien fichier channels.conf avec France 2 par exemple

tzap France 2
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 498167000 Hz
video pid 0x0000, audio pid 0x01ae
status 01 | signal 2a2a | snr 8000 | ber 00003fff | unc 00000000 |
status 1f | signal 2a2a | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 2a2a | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 2a2a | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 2a2a | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 2a2a | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 2a2a | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Les résultats n'ont pas l'air mal mais quand je sélectionne France 2 dans Kaffeine, celui-ci me met : Impossible de régler le tuner!
Je ne sais plus quoi faire... D'avance merci!

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

status 1f | signal 2a2a | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Le snr me parait suspect

Revoir les cables de connexions ...
Sinon je ne vois pas

Autre essaie : change de noyau pour voir, il me semble avoir vu passé dans la ml de v4l un problème concernant les noyaux sous hardy

fucce

Re : hvr1110 = hvr1100 + saa713x, installation ici

Je suis revenu à mon premier noyau (2.6.20-16-generic) et ça n'a rien changé! Quant aux câbles, la prise d'antenne sort de mon décodeur qui lui fonctionne. De plus, je capte les autres chaines... je dépends de l'emetteur de Nantes. Merci tout de même pour ta réponse!

Dernière modification par fucce (Le 18/08/2008, à 22:39)

tomlohave

Re : hvr1110 = hvr1100 + saa713x, installation ici

C'est quand même assez curieux  : regarde par ici : http://vdr.bluox.org/wiki/index.php/DVB … sur_Nantes : il semblerait qu'il y ait eu du changement sur les fréquences de Nantes :

sur le site :
France 2;GR1:530166
et toi :
tzap France 2
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 498167000 Hz

pas la même fréquence

réessaie avec un scan automatique, soit kafféine soit avec un logiciel spécialisé :

http://doc.ubuntu-fr.org/tnt#les_frequences

Bon courage

fucce

Re : hvr1110 = hvr1100 + saa713x, installation ici

Je réessaie ça ce soir et je te tiens au courant! Merci encore!

fucce

Re : hvr1110 = hvr1100 + saa713x, installation ici

euh... ben... rien à y comprendre!! J'ai lancé un w_scan qui m'a reconnu France alors avant de copier le fichier channels.dvb dans kaffeine, j'ai refait un essai de scan et là oh mirecle France 2 réapparait... Merci à toi tomlohave mais je n'aime pas résoudre mes problèmes sans comprendre!!:/ Sachant que je me suis aperçu du pb samedi am, ce n'était sans doute pas nouveau!!

pascalh

Re : hvr1110 = hvr1100 + saa713x, installation ici

Je viens d'installer Hardy avec une hvr 1110. J'ai copié le firmware dans /lib/firmware et quand je scanne sous Kaffeine, il y a un signal mais ça ne "tune" pas.

J'ai installéw-scan et voici ce que ça me donne :

ERROR: Sorry - i couldn't get any working frequency/transponder
 Nothing to scan!!

Un petit coup de main ?

Edit : j'ai ajouté 166khz et ça roule.

Dernière modification par pascalh (Le 05/09/2008, à 23:38)

---

"Ceux qui sont prêts à sacrifier une liberté essentielle pour acheter une sûreté passagère, ne méritent ni l’une ni l’autre." Benjamin Franklin