hvr1110 = hvr1100 + saa713x, installation ici

vinc1564 · Le 13/01/2007, à 19:10

OK, thank you with mplayer it works:D

vinc@Kubuntu-Box:~$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: I82801BAICH2 [Intel 82801BA-ICH2], device 0: Intel ICH [Intel 82801BA-ICH2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: I82801BAICH2 [Intel 82801BA-ICH2], device 1: Intel ICH - MIC ADC [Intel 82801BA-ICH2 - MIC ADC]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2:SAA7134 [SAA7134], device 0: SAA7134 PCM [SAA7134 PCM]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

and so...

mplayer tv://$channel -tv driver=v4l2:device=/dev/video0:alsa:adevice=hw.2,0:amode=1:audiorate=32000:forceaudio:volume=100:immediatemode=0:norm=PAL

Now I'm trying to understand how to change the channel into mplayer and how to record an analogic channel into .avi file.
Thank you for you support.

Dernière modification par vinc1564 (Le 13/01/2007, à 19:11)

tomlohave · Le 14/01/2007, à 00:21

you can change channel into mplayer with the remote controller.
To record, please look at the same page on the wiki (look in my previous post)

"-" · Le 14/01/2007, à 13:01

Problème résolu avec le programme irkick. (Il y a sûrement plus simple, mais irkick marche.)

++, "-".

beberwlinux · Le 15/01/2007, à 19:09

bonjour, merci de ton passage dans mon message
sa m'a permi de resoudre un bon nombre de probleme

la TNT fonctionne avec Kaffeine
mais je n'ai pas de son avec KDETV et quand je regarde mon dmesg je vois une anomalie
as tu une idée de l'origine?
merci

[17179594.096000] Linux video capture interface: v2.00
[17179594.208000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179594.212000] PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
[17179594.212000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179594.212000] saa7133[0]: found at 0000:06:00.0, rev: 208, irq: 177, latency : 0, mmio: 0x36000000
[17179594.212000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[17179594.212000] saa7133[0]: subsystem: 0331:1421, board: ADS Instant TV Duo Ca rdbus PTV331 [card=87,autodetected]
[17179594.212000] saa7133[0]: board init: gpio is 8010000
[17179594.348000] saa7133[0]: i2c eeprom 00: 31 03 21 14 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[17179594.348000] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
[17179594.348000] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 8d ff ff ff ff
[17179594.348000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.348000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 22 15 ff ff ff ff
[17179594.348000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.348000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.348000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179594.436000] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[17179594.484000] tuner 1-004b: setting tuner address to 61
[17179594.524000] tuner 1-004b: type set to tda8290+75a
[17179594.588000] saa7133[0]: registered device video0 [v4l2]
[17179594.588000] saa7133[0]: registered device vbi0
[17179594.616000] saa7134_alsa: disagrees about version of symbol saa_dsp_writel
[17179594.616000] saa7134_alsa: Unknown symbol saa_dsp_writel
[17179594.616000] saa7134_alsa: Unknown symbol videobuf_dma_pci_unmap
[17179594.616000] saa7134_alsa: Unknown symbol videobuf_dma_pci_map
[17179594.616000] saa7134_alsa: Unknown symbol dmasound_exit
[17179594.616000] saa7134_alsa: Unknown symbol dmasound_init
[17179594.616000] saa7134_alsa: disagrees about version of symbol saa7134_set_dm abits
[17179594.616000] saa7134_alsa: Unknown symbol saa7134_set_dmabits

tomlohave · Le 15/01/2007, à 20:00

humm ,

avant le "make" dans le repertoire v4l-dvb essaie ça d'abord :

make distclean
make
make install

et n'oublie pas de redémarrer ...

Bon courage

beberwlinux · Le 17/01/2007, à 00:08

Bonsoir j'ai tout recommencer avec en plus l'installation du driver Ati
la TNT marche super bien maintenant
en analogique kdetv => ecran noir et redemarre le PC (par moment juste apres l'ecran noir j'ai des parasites a l'affichage comme sur une vrai TV quand elle cherche les chaines)
et Tv time image ok mais pas de son

lavio@lavio:~$ lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 03)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB-720/2/4 Cardbus Controller (rev 01)
0000:00:0a.1 CardBus bridge: ENE Technology Inc CB-720/2/4 Cardbus Controller (rev 01)
0000:00:0a.2 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Controller
0000:00:0c.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)
0000:00:0d.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000] (rev 01)
0000:06:00.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d0)
lavio@lavio:~$

et sa pour le dmesg
[17179598.964000] Linux video capture interface: v2.00
[17179599.104000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179599.104000] PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
[17179599.104000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179599.104000] saa7133[0]: found at 0000:06:00.0, rev: 208, irq: 177, latency : 0, mmio: 0x36000000
[17179599.104000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[17179599.104000] saa7133[0]: subsystem: 0331:1421, board: ADS Instant TV Duo Ca rdbus PTV331 [card=87,autodetected]
[17179599.104000] saa7133[0]: board init: gpio is 8010000
[17179599.140000] skge eth0: enabling interface
[17179599.240000] saa7133[0]: i2c eeprom 00: 31 03 21 14 54 20 1c 00 43 43 a9 1c  55 d2 b2 92
[17179599.240000] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff  ff ff ff ff
[17179599.240000] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 8d  ff ff ff ff
[17179599.240000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff  ff ff ff ff
[17179599.240000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 22 15  ff ff ff ff
[17179599.240000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff  ff ff ff ff
[17179599.240000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff  ff ff ff ff
[17179599.240000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff  ff ff ff ff
[17179599.328000] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[17179599.376000] tuner 1-004b: setting tuner address to 61
[17179599.416000] tuner 1-004b: type set to tda8290+75a
[17179599.480000] saa7133[0]: registered device video0 [v4l2]
[17179599.480000] saa7133[0]: registered device vbi0
[17179599.492000] saa7134 ALSA driver for DMA sound loaded
[17179599.492000] saa7133[0]/alsa: saa7133[0] at 0x36000000 irq 177 registered a s card -1
[17179600.012000] lp0: using parport0 (interrupt-driven).
[17179600.080000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179600.080000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1 )
[17179600.080000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179600.200000] NET: Registered protocol family 17
[17179600.340000] DVB: registering new adapter (saa7133[0]).
[17179600.340000] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...

as tu une idée du probleme
PS j'ai une carte ati mobility et sa me marque firegl c'est bizarre!!!

beberwlinux · Le 21/01/2007, à 15:21

Bonjour,
je possede une carte ati mobilty 9000 ,et une carte ADS dualTV cardbus

[17179569.184000] Linux version 2.6.17-10-386 (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Tue Dec 5 22:26:18 UTC 2006 (Ubuntu 2.6.17-10.34-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000001fffa000 (usable)
[17179569.184000]  BIOS-e820: 000000001fffa000 - 000000001ffff000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 131066
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 126970 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f6410
[17179569.184000] ACPI: RSDT (v001 ASUS   L5C      0x42302e31 MSFT 0x31313031) @ 0x1fffa000
[17179569.184000] ACPI: FADT (v001 ASUS   L5C      0x42302e31 MSFT 0x31313031) @ 0x1fffa0b6
[17179569.184000] ACPI: BOOT (v001 ASUS   L5C      0x42302e31 MSFT 0x31313031) @ 0x1fffa030
[17179569.184000] ACPI: MADT (v001 ASUS   L5C      0x42302e31 MSFT 0x31313031) @ 0x1fffa058
[17179569.184000] ACPI: DSDT (v001   ASUS L5C      0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=bb974967-c128-43d8-a031-bbe68ee296cf ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 2800.348 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.236000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.236000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.248000] Memory: 508948k/524264k available (1829k kernel code, 14764k reserved, 1038k data, 288k init, 0k highmem)
[17179572.248000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.328000] Calibrating delay using timer specific routine.. 5605.49 BogoMIPS (lpj=11210988)
[17179572.328000] Security Framework v1.0.0 initialized
[17179572.328000] SELinux:  Disabled at boot.
[17179572.328000] Mount-cache hash table entries: 512
[17179572.328000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179572.328000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179572.328000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179572.328000] CPU: L2 cache: 512K
[17179572.328000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[17179572.328000] CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[17179572.328000] Checking 'hlt' instruction... OK.
[17179572.344000] SMP alternatives: switching to UP code
[17179572.344000] Freeing SMP alternatives: 0k freed
[17179572.344000] checking if image is initramfs... it is
[17179572.896000] Freeing initrd memory: 6692k freed
[17179572.896000] ACPI: Core revision 20060707
[17179572.900000] ACPI: Looking for DSDT ... not found!
[17179572.908000] ENABLING IO-APIC IRQs
[17179572.908000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.052000] NET: Registered protocol family 16
[17179573.052000] EISA bus registered
[17179573.052000] ACPI: bus type pci registered
[17179573.056000] PCI: PCI BIOS revision 2.10 entry at 0xf1670, last bus=1
[17179573.056000] PCI: Using configuration type 1
[17179573.056000] Setting up standard PCI resources
[17179573.076000] ACPI: Interpreter enabled
[17179573.076000] ACPI: Using IOAPIC for interrupt routing
[17179573.076000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 15)
[17179573.080000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 15)
[17179573.080000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 15)
[17179573.080000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 11 15) *0, disabled.
[17179573.080000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[17179573.080000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
[17179573.080000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[17179573.080000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
[17179573.080000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.080000] PCI: Probing PCI hardware (bus 00)
[17179573.080000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179573.088000] Uncovering SIS963 that hid as a SIS503 (compatible=1)
[17179573.088000] Enabling SiS 96x SMBus.
[17179573.088000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
[17179573.088000] Boot video device is 0000:01:00.0
[17179573.088000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.108000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[17179573.112000] ACPI: Power Resource [FN0] (off)
[17179573.112000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.112000] pnp: PnP ACPI init
[17179573.116000] pnp: PnP ACPI: found 16 devices
[17179573.116000] PnPBIOS: Disabled by ACPI PNP
[17179573.116000] PCI: Using ACPI for IRQ routing
[17179573.116000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.136000] pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
[17179573.136000] pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved
[17179573.136000] pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
[17179573.136000] pnp: 00:02: ioport range 0x480-0x48f has been reserved
[17179573.136000] pnp: 00:0f: ioport range 0x3f0-0x3f1 has been reserved
[17179573.136000] pnp: 00:0f: ioport range 0x290-0x297 has been reserved
[17179573.136000] pnp: 00:0f: ioport range 0x500-0x507 has been reserved
[17179573.136000] PCI: Bridge: 0000:00:01.0
[17179573.136000]   IO window: d000-dfff
[17179573.136000]   MEM window: e7800000-e7ffffff
[17179573.136000]   PREFETCH window: eff00000-febfffff
[17179573.136000] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[17179573.136000]   IO window: 00001000-000010ff
[17179573.136000]   IO window: 00001400-000014ff
[17179573.136000]   PREFETCH window: 30000000-31ffffff
[17179573.136000]   MEM window: 32000000-33ffffff
[17179573.136000] PCI: Bus 6, cardbus bridge: 0000:00:0a.1
[17179573.136000]   IO window: 00001800-000018ff
[17179573.136000]   IO window: 00001c00-00001cff
[17179573.136000]   PREFETCH window: 34000000-35ffffff
[17179573.136000]   MEM window: 36000000-37ffffff
[17179573.136000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179573.136000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179573.136000] ACPI: PCI Interrupt 0000:00:0a.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179573.136000] NET: Registered protocol family 2
[17179573.168000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179573.168000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[17179573.168000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[17179573.168000] TCP: Hash tables configured (established 16384 bind 8192)
[17179573.168000] TCP reno registered
[17179573.168000] Simple Boot Flag at 0x3a set to 0x1
[17179573.168000] audit: initializing netlink socket (disabled)
[17179573.168000] audit(1169384084.168:1): initialized
[17179573.168000] VFS: Disk quotas dquot_6.5.1
[17179573.168000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.168000] Initializing Cryptographic API
[17179573.168000] io scheduler noop registered
[17179573.168000] io scheduler anticipatory registered
[17179573.168000] io scheduler deadline registered
[17179573.168000] io scheduler cfq registered (default)
[17179573.168000] isapnp: Scanning for PnP cards...
[17179573.520000] isapnp: No Plug & Play device found
[17179573.540000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.540000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.540000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.540000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.540000] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 185
[17179573.540000] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[17179573.540000] mice: PS/2 mouse device common for all mice
[17179573.540000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.540000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.540000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.544000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179573.544000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179573.544000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179573.544000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179573.544000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179573.544000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179573.544000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.548000] EISA: Probing bus 0 at eisa.0
[17179573.548000] Cannot allocate resource for EISA slot 1
[17179573.548000] EISA: Detected 0 cards.
[17179573.548000] TCP bic registered
[17179573.548000] NET: Registered protocol family 1
[17179573.548000] NET: Registered protocol family 8
[17179573.548000] NET: Registered protocol family 20
[17179573.548000] Using IPI Shortcut mode
[17179573.548000] ACPI: (supports S0 S1 S3 S4 S5)
[17179573.548000] Freeing unused kernel memory: 288k freed
[17179573.704000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.620000] Capability LSM initialized
[17179574.652000] ACPI: Fan [FAN0] (on)
[17179574.652000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179574.652000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179574.652000] ACPI: Getting cpuindex for acpiid 0x1
[17179574.656000] ACPI: Thermal Zone [THRM] (26 C)
[17179575.060000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[17179575.060000] SIS5513: chipset revision 0
[17179575.060000] SIS5513: not 100% native mode: will probe irqs later
[17179575.060000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[17179575.060000]     ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
[17179575.060000]     ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
[17179575.060000] Probing IDE interface ide0...
[17179575.796000] hda: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive
[17179576.172000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.180000] Probing IDE interface ide1...
[17179576.468000] hdc: IC25N060ATMR04-0, ATA DISK drive
[17179577.140000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.180000] hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.180000] Uniform CD-ROM driver Revision: 3.20
[17179577.192000] hdc: max request size: 512KiB
[17179577.196000] hdc: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
[17179577.196000] hdc: cache flushes supported
[17179577.196000]  hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 >
[17179578.448000] ieee1394: Initialized config rom entry `ip1394'
[17179578.452000] ACPI: PCI Interrupt 0000:00:02.3[b] -> GSI 17 (level, low) -> IRQ 177
[17179578.504000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177]  MMIO=[e7000000-e70007ff]  Max Packet=[2048]  IR/IT contexts=[4/6]
[17179578.520000] usbcore: registered new driver usbfs
[17179578.520000] usbcore: registered new driver hub
[17179578.524000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179578.524000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 193
[17179578.524000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[17179578.524000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[17179578.524000] ohci_hcd 0000:00:03.0: irq 193, io mem 0xe6800000
[17179578.580000] usb usb1: configuration #1 chosen from 1 choice
[17179578.580000] hub 1-0:1.0: USB hub found
[17179578.580000] hub 1-0:1.0: 2 ports detected
[17179578.684000] ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level, low) -> IRQ 201
[17179578.684000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[17179578.684000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[17179578.684000] ohci_hcd 0000:00:03.1: irq 201, io mem 0xe6000000
[17179578.740000] usb usb2: configuration #1 chosen from 1 choice
[17179578.740000] hub 2-0:1.0: USB hub found
[17179578.740000] hub 2-0:1.0: 2 ports detected
[17179578.844000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 209
[17179578.844000] ohci_hcd 0000:00:03.2: OHCI Host Controller
[17179578.844000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[17179578.844000] ohci_hcd 0000:00:03.2: irq 209, io mem 0xe5800000
[17179578.900000] usb usb3: configuration #1 chosen from 1 choice
[17179578.900000] hub 3-0:1.0: USB hub found
[17179578.900000] hub 3-0:1.0: 2 ports detected
[17179579.004000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 217
[17179579.004000] ehci_hcd 0000:00:03.3: EHCI Host Controller
[17179579.004000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[17179579.004000] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[17179579.004000] ehci_hcd 0000:00:03.3: irq 217, io mem 0xe5000000
[17179579.004000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179579.004000] usb usb4: configuration #1 chosen from 1 choice
[17179579.004000] hub 4-0:1.0: USB hub found
[17179579.004000] hub 4-0:1.0: 6 ports detected
[17179579.348000] ohci_hcd 0000:00:03.2: wakeup
[17179579.732000] usb 3-1: new low speed USB device using ohci_hcd and address 2
[17179579.780000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000315a583]
[17179579.940000] usb 3-1: configuration #1 chosen from 1 choice
[17179579.952000] usbcore: registered new driver hiddev
[17179579.964000] input: HID 1241:1177 as /class/input/input1
[17179579.964000] input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:03.2-1
[17179579.964000] usbcore: registered new driver usbhid
[17179579.964000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179580.000000] kjournald starting.  Commit interval 5 seconds
[17179580.000000] EXT3-fs: mounted filesystem with ordered data mode.
[17179595.232000] ieee80211_crypt: registered algorithm 'NULL'
[17179595.236000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179595.236000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179595.260000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179595.260000] Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1734]
[17179595.260000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179595.260000] Yenta: Routing CardBus interrupts to PCI
[17179595.260000] Yenta TI: socket 0000:00:0a.0, mfunc 0x01000222, devctl 0x44
[17179595.740000] irda_init()
[17179595.740000] NET: Registered protocol family 23
[17179595.876000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 169
[17179595.876000] Socket status: 30000006
[17179595.876000] ACPI: PCI Interrupt 0000:00:0a.1[b] -> GSI 17 (level, low) -> IRQ 177
[17179595.876000] Yenta: CardBus bridge found at 0000:00:0a.1 [1043:1734]
[17179595.876000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179595.876000] Yenta: Routing CardBus interrupts to PCI
[17179595.876000] Yenta TI: socket 0000:00:0a.1, mfunc 0x01000222, devctl 0x44
[17179596.108000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 177
[17179596.108000] Socket status: 30000020
[17179596.132000] parport: PnPBIOS parport detected.
[17179596.132000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179596.608000] Floppy drive(s): fd0 is 1.44M
[17179596.624000] FDC 0 is a post-1991 82077
[17179596.744000] pccard: CardBus card inserted into slot 1
[17179597.224000] input: PC Speaker as /class/input/input2
[17179597.360000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179597.360000] skge 1.5 addr 0xe3800000 irq 185 chip Yukon rev 1
[17179597.360000] skge eth0: addr 00:0e:a6:3f:cb:46
[17179597.400000] Real Time Clock Driver v1.12ac
[17179597.440000] bcm43xx driver
[17179597.440000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179597.556000] Linux agpgart interface v0.101 (c) Dave Jones
[17179597.560000] agpgart: Detected SiS 648 chipset
[17179597.564000] agpgart: AGP aperture is 64M @ 0xe8000000
[17179597.724000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179597.728000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179597.752000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 185
[17179598.248000] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
[17179598.288000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[17179598.352000] skge eth0: enabling interface
[17179598.576000] intel8x0_measure_ac97_clock: measured 55410 usecs
[17179598.576000] intel8x0: clocking to 48000
[17179598.576000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe800
[17179598.876000] ts: Compaq touchscreen protocol output
[17179598.936000] cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
[17179598.936000] cs: IO port probe 0xc00-0xcf7: clean.
[17179598.936000] cs: IO port probe 0xa00-0xaff: clean.
[17179599.392000] NET: Registered protocol family 17
[17179599.448000] cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
[17179599.452000] cs: IO port probe 0xc00-0xcf7: clean.
[17179599.452000] cs: IO port probe 0xa00-0xaff: clean.
[17179599.880000] Linux video capture interface: v2.00
[17179599.948000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179599.948000] PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
[17179599.948000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179599.948000] saa7133[0]: found at 0000:06:00.0, rev: 208, irq: 177, latency: 0, mmio: 0x36000000
[17179599.948000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[17179599.948000] saa7133[0]: subsystem: 0331:1421, board: ADS Instant TV Duo Cardbus PTV331 [card=87,autodetected]
[17179599.948000] saa7133[0]: board init: gpio is 8010000
[17179600.048000] skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx
[17179600.084000] saa7133[0]: i2c eeprom 00: 31 03 21 14 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[17179600.084000] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
[17179600.084000] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 8d ff ff ff ff
[17179600.084000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179600.084000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 22 15 ff ff ff ff
[17179600.084000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179600.084000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179600.084000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179600.180000] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[17179600.228000] tuner 1-004b: setting tuner address to 61
[17179600.268000] tuner 1-004b: type set to tda8290+75a
[17179600.332000] saa7133[0]: registered device video0 [v4l2]
[17179600.332000] saa7133[0]: registered device vbi0
[17179600.352000] saa7134 ALSA driver for DMA sound loaded
[17179600.352000] saa7133[0]/alsa: saa7133[0] at 0x36000000 irq 177 registered as card -1
[17179600.496000] lp0: using parport0 (interrupt-driven).
[17179600.604000] SCSI subsystem initialized
[17179600.624000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179600.624000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179600.764000] DVB: registering new adapter (saa7133[0]).
[17179600.764000] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[17179600.836000] Adding 1510068k swap on /dev/disk/by-uuid/2960568e-ecea-474d-8d54-6ce46536ce0a.  Priority:-1 extents:1 across:1510068k
[17179600.928000] EXT3 FS on hdc1, internal journal
[17179601.176000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179601.176000] md: bitmap version 4.39
[17179601.352000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179602.728000] kjournald starting.  Commit interval 5 seconds
[17179602.736000] EXT3 FS on hdc6, internal journal
[17179602.736000] EXT3-fs: mounted filesystem with ordered data mode.
[17179603.892000] NET: Registered protocol family 10
[17179603.892000] lo: Disabled Privacy Extensions
[17179603.892000] IPv6 over IPv4 tunneling driver
[17179603.900000] Asus Laptop ACPI Extras version 0.30
[17179603.900000]   L5G model detected, supported
[17179603.916000] ACPI: AC Adapter [AC] (on-line)
[17179603.964000] ACPI: Battery Slot [BAT0] (battery present)
[17179603.976000] ACPI: Power Button (FF) [PWRF]
[17179603.976000] ACPI: Lid Switch [LID]
[17179603.976000] ACPI: Power Button (CM) [PWRB]
[17179603.976000] ACPI: Sleep Button (CM) [SLPB]
[17179604.076000] ibm_acpi: ec object not found
[17179604.104000] pcc_acpi: loading...
[17179604.476000] acpi_cpufreq: Unknown symbol cpu_online_map
[17179610.572000] [drm] Initialized drm 1.0.1 20051102
[17179610.584000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179610.584000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179611.584000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179611.584000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179611.584000] agpgart: SiS delay workaround: giving bridge time to recover.
[17179611.600000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17179611.856000] [drm] Setting GART location based on new memory map
[17179611.856000] [drm] Loading R200 Microcode
[17179611.856000] [drm] writeback test succeeded in 1 usecs
[17179612.244000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179612.244000] apm: overridden by ACPI.
[17179612.452000] Bluetooth: Core ver 2.8
[17179612.452000] NET: Registered protocol family 31
[17179612.452000] Bluetooth: HCI device and connection manager initialized
[17179612.452000] Bluetooth: HCI socket layer initialized
[17179612.500000] Bluetooth: L2CAP ver 2.8
[17179612.500000] Bluetooth: L2CAP socket layer initialized
[17179612.536000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179612.552000] Bluetooth: RFCOMM socket layer initialized
[17179612.552000] Bluetooth: RFCOMM TTY layer initialized
[17179612.552000] Bluetooth: RFCOMM ver 1.7
[17179614.048000] eth0: no IPv6 routers present

en enlevant le driver proprietaire ati et le remplacer par le driver radeon
kdetv , xawtv fonctionne (enfin sa ne plante plus au demarrage) => logiciels incompatible avec les drivers ati ???

pour lancer kdetv je suis obligé de passer par le terminal (raccourci non present dans "application") d'ou sa peut venir ce probleme

xawtv: comment on fait pour scanner les chaines? je n'arrive pas a lui faire prendre secam france et ect... est ce qu'il existe une touche "scan"???

Tvtime: je n'ai que 4 chaines

pour les 3 logiciels: je n'arrive pas a avoir le son...

en TNT avec kaffeine tout fonctionne hormis la qualité de l'affichage
ce probleme je l'avais resolu avec le driver ati proprietaire
je voudrais savoir si c'est possible un conflit driver ati proprietaire avec la carte tuner TV en analogique ou les logiciels kdetv et xawtv (tvtime ne plantait pas)
merci

twinoatl · Le 07/02/2007, à 21:18

Je n'ai pas le son moi non plus, quelqu'un peut m'aider ?

beberwlinux · Le 09/02/2007, à 20:35

s'en depend sur quoi? tom peut peut etre t'aider
decris ton materiel

twinoatl · Le 09/02/2007, à 21:18

Après moults essais, j'y suis enfin arrivé. Le câble interne était branché sur l'entrée audio et pas sur la sortie au niveau de la carte tuner. Merci quand même.

badalf · Le 10/02/2007, à 20:17

Bonjour à tous,

Est-ce quelqu'un pourrait poster le firmware de la carte, car je ne le trouve pas sur le site ????
J'en ai trouvé un sur un autre site, mais la carte ne fonctionne pas (tuning failed quand je fais un scan)

PS : je suis sous Debian Testing

Merci d'avance

badalf33 · Le 10/02/2007, à 20:25

Le post du dessus est le mien ......

Je précise que j'ai aussi une WinTV NOVA 500 ds la meme machine, et elle marche très bien ...
Voici le dmsg :

vb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 58
saa7133[0]: found at 0000:05:07.0, rev: 209, irq: 58, latency: 32, mmio: 0xd400a000
saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
saa7133[0]: board init: gpio is 6400000
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:04.0 to 64
input: HVR 1110 as /class/input/input3
ir-kbd-i2c: HVR 1110 detected at i2c-2/2-0071/ir0 [saa7133[0]]
saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dib0700: firmware started successfully.
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tuner 2-004b: setting tuner address to 61
intel8x0_measure_ac97_clock: measured 58637 usecs
intel8x0: clocking to 47040
tuner 2-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T).
DVB: registering frontend 0 (DiBcom 3000MC/P)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T).
DVB: registering frontend 1 (DiBcom 3000MC/P)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.usbcore: registered new driver dvb_usb_dib0700
Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
EXT3 FS on sda1, internal journal
loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 2 (Philips TDA10046H DVB-T)...
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
skge eth1: enabling interface

La carte HVR1100 est bien détecté, et le firmware se charge, mais ça marche pas -:(

tomlohave · Le 10/02/2007, à 23:02

DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 2 (Philips TDA10046H DVB-T)...

A priori tout fonctionne ....

Tu peux préciser en quoi cela ne fonctionne pas , quel soft tu utilises etc ....

Au passage ici, il s'agit du frontend 2

Vérifie que c'est ce paramètre que tu utulises lors de tes essais ...

Dernière modification par tomlohave (Le 10/02/2007, à 23:03)

badalf33 · Le 11/02/2007, à 00:00

Pour le firmware, c bon j'ai testé avec un téléchargé depuis le Geexbox Generator et ça change rien

Voici mon test :

scan -a 2 /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Bordeaux
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Bordeaux
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
initial transponder 482000000 0 2 9 3 1 0 0
initial transponder 490000000 0 2 9 3 1 0 0
initial transponder 514000000 0 2 9 3 1 0 0
initial transponder 546000000 0 2 9 3 1 0 0
initial transponder 562000000 0 2 9 3 1 0 0
initial transponder 778000000 0 2 9 3 1 0 0
initial transponder 658000000 0 2 9 3 1 0 0
initial transponder 802000000 0 2 9 3 1 0 0
>>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 778000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 658000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 658000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 802000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 802000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

Bien sur si je teste avec l'un des 2 autres tuners ça marche sans soucis ....

Si je démarre le service mythbackend depuis un tty voici le message que j'ai :

tda1004x: setting up plls for 48Mha sampling clock
tda1004x: found firmware revision 20 -- ok

Merci d'avance de votre aide ....

Dernière modification par badalf33 (Le 11/02/2007, à 00:16)

tomlohave · Le 11/02/2007, à 09:30

initial transponder 482000000 0 2 9 3 1 0 0
initial transponder 490000000 0 2 9 3 1 0 0
initial transponder 514000000 0 2 9 3 1 0 0
initial transponder 546000000 0 2 9 3 1 0 0
initial transponder 562000000 0 2 9 3 1 0 0
initial transponder 778000000 0 2 9 3 1 0 0
initial transponder 658000000 0 2 9 3 1 0 0
initial transponder 802000000 0 2 9 3 1 0 0

rajoute +166 khz dans le fichier des fréquences:

copie /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Bordeaux dans ton rep personnel et modifie le en le nommant fr-bordeaux2 comme ceci ;

48200000 devient 482166000

et ainsi de suite pour toutes fes fréquences.
réessie de scanner avec ce nouveau fichier

scan fr-bordeaux2

et poste les résultats

badalf33 · Le 11/02/2007, à 12:58

Super merci ça marche !!!

Voici le résultat :

scan -a 2 fr-Bordeaux166
scanning fr-Bordeaux166
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
initial transponder 482166000 0 2 9 3 1 0 0
initial transponder 490166000 0 2 9 3 1 0 0
initial transponder 514166000 0 2 9 3 1 0 0
initial transponder 546166000 0 2 9 3 1 0 0
initial transponder 562166000 0 2 9 3 1 0 0
initial transponder 778166000 0 2 9 3 1 0 0
initial transponder 658166000 0 2 9 3 1 0 0
initial transponder 802166000 0 2 9 3 1 0 0
>>> tune to: 482166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 482166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 490166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0101: pmt_pid 0x006e GR1 -- France 2 (running)
0x0000 0x0103: pmt_pid 0x019a GR1 -- France 4 (running)
0x0000 0x0104: pmt_pid 0x0136 GR1 -- France 5 (running)
0x0000 0x0105: pmt_pid 0x01fe GR1 -- ARTE (running)
0x0000 0x0106: pmt_pid 0x0262 GR1 -- LCP (running)
0x0000 0x0112: pmt_pid 0x00d2 Reg -- France 3 (running)
0x0000 0x01ff: pmt_pid 0x03f2 (null) -- (null) (running)
Network Name 'réseau numérique terrestre français'
>>> tune to: 514166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 514166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 546166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0601: pmt_pid 0x0064 SMR6 -- TF1 (running)
0x0000 0x0602: pmt_pid 0x00c8 SMR6 -- NRJ12 (running)
0x0000 0x0605: pmt_pid 0x01f4 SMR6 -- TPS STAR (running)
0x0000 0x0604: pmt_pid 0x0190 SMR6 -- Eurosport France (running, scrambled)
0x0000 0x0603: pmt_pid 0x012c SMR6 -- LCI (running, scrambled)
Network Name 'Réseau Numérique Terrestre Français'
>>> tune to: 562166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 562166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 778166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0201: pmt_pid 0x0000 NTN -- Direct 8 (running)
0x0000 0x0202: pmt_pid 0x0000 NTN -- TMC (running)
0x0000 0x0203: pmt_pid 0x0000 NTN -- BFM TV (running)
0x0000 0x0204: pmt_pid 0x0000 NTN -- i>TELE (running)
0x0000 0x0205: pmt_pid 0x0000 NTN -- Europe 2 TV (running)
0x0000 0x0206: pmt_pid 0x0000 NTN -- Gulli (running)
Network Name 'réseau numérique terrestre français'
>>> tune to: 658166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0404: pmt_pid 0x019a MULTI4 -- PARIS PREMIERE (running, scrambled)
0x0000 0x0405: pmt_pid 0x01fe MULTI4 -- TF6 (running, scrambled)
0x0000 0x0401: pmt_pid 0x006e MULTI4 -- M6 (running)
0x0000 0x0402: pmt_pid 0x00d2 MULTI4 -- W9 (running)
0x0000 0x0403: pmt_pid 0x0136 MULTI4 -- NT1 (running)
0x0000 0x0406: pmt_pid 0x0262 MULTI4 -- AB1 (running, scrambled)
Network Name 'réseau numérique terrestre français'
>>> tune to: 802166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0301: pmt_pid 0x0500 CNH -- CANAL+ (running)
0x0000 0x0302: pmt_pid 0x0501 CNH -- CANAL+ CINEMA (running, scrambled)
0x0000 0x0303: pmt_pid 0x0502 CNH -- CANAL+ SPORT (running)
0x0000 0x0304: pmt_pid 0x0503 CNH -- PLANETE (running, scrambled)
0x0000 0x0305: pmt_pid 0x0504 CNH -- CANAL J (running, scrambled)
0x0000 0x03f0: pmt_pid 0x050a CNH -- (null) (running)
0x0000 0x03f1: pmt_pid 0x050b CNH -- (null) (running)
Network Name 'réseau numérique terrestre français'
>>> tune to: -10:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_1_2:QPSK:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: -10:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_1_2:QPSK:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
dumping lists (33 services)
France 2:490166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:257
France 4:490166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:420:430:259
France 5:490166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:320:330:260
ARTE:490166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:520:530:261
LCP:490166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:620:630:262
France 3:490166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:220:230:274
[01ff]:490166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:511
TF1:546166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:1537
NRJ12:546166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:220:230:1538
LCI:546166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:330:1539
Eurosport France:546166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:430:1540
TPS STAR:546166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:528:530:1541
Direct 8:778166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:160:80:513
TMC:778166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:161:84:514
BFM TV:778166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:162:88:515
i>TELE:778166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:163:92:516
Europe 2 TV:778166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:164:96:517
Gulli:778166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:165:100:518
[02ff]:778166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:767
[04ff]:658166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:1279
M6:658166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:1025
W9:658166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:220:230:1026
NT1:658166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:320:330:1027
PARIS PREMIERE:658166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:430:1028
TF6:658166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:530:1029
AB1:658166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:630:1030
CANAL+:802166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:170:120:769
[03f1]:802166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:1009
[03f0]:802166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:1008
CANAL J:802166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:96:773
PLANETE:802166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:92:772
CANAL+ SPORT:802166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:88:771
CANAL+ CINEMA:802166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:84:770
Done.

Quelqu'un a une explication à ce soucis ????
Et si au passage vous avez une idée sur comment configurer Mythtv avec les 2 cartes en tenant compte de cette "originalité", je suis preneur ...

Merci beaucoup en tout en cas !!!

tomlohave · Le 11/02/2007, à 13:07

C'est un problème connu (pour les fréquences françaises ...)
Pour mythtv, désolé je n'y connais rien.

Ouvre un nouveau post concernant ce problème.

tomlohave · Le 11/02/2007, à 13:08

Perso, j'utilise freevo

badalf33 · Le 11/02/2007, à 13:17

C bon je me suis débrouillé avec MythTV et ça marche nickel

Pour les fréquences, il serait judicieux de le mettre ds le 1er post du topic non ?

Encore bravo et merci

@+

Robertocarlos7 · Le 28/04/2007, à 15:56

J'ai acheté une Hauppauge 1110. J'ai suivi la procédure d'installation de la première page. La carte est reconnue sous kaffeine. Le scan des chaînes TNT ne donne rien (enfin sous xp aussi).
MAIS, mon problème est de pouvoir utiliser cette carte avec l'entrée composite ou S-video.
Pour résumer, j'ai un abonnement canal+ et un décodeur et j'aimerais pouvoir visualiser la sortie du décodeur sur mon Ubuntu. Pour cela, j'aimerais utiliser l'entrée composite.
J'ai essayé Xawtv mais écran noir + reboot machine. VLC n'arrive pas à lire : /dev/video1. Sur un forum, j'ai trouvé une ligne de commande pour ouvrir avec mplayer mais j'ai un écran noir.
=> Je voudrais trouver une solution a mon problème en utilisant cette carte si possible.
J'attends vos suggestions avec impatience !!!

tomlohave · Le 29/04/2007, à 07:01

1) tu es sous quelle distribution ? feisty , edgy, dapper ?

sous feisty, il est inutile de recompiler les drivers v4l; la carte étant directement reconnue dans le noyau 2.6.20-15

2)

Le scan des chaînes TNT ne donne rien (enfin sous xp aussi).

xp n'est pas une référence ...
As tu copié le firmware de la carte (tda10046) dans /lib/firmware ?
As tu ensuite chargé le module saa7134-dvb ?

3) pour l'acquisition sur le peripherique svideo ou composite essaie, ça :

mplayer  tv:// -tv driver=v4l2:device=/dev/video0:input=1

ou bien

mplayer  tv:// -tv driver=v4l2:device=/dev/video0:input=2

En supposant que ta carte est sur le periphérique video0 sinon change video0 en video1

Je précise que tu n'auras pas de son ....
il faut brancher le son sur ta carte son est non sur le périphérique input de la carte hvr1110 (marqué comme FIXME dans les sources, pas de capture sonore, j'ai pas trouvé ...)

Robertocarlos7 · Le 29/04/2007, à 11:33

Merci pour ta réponse, voila ce qu'il en est :

1) Je suis sous Feisty et j'ai recompilé les drivers v4l.

2) J'ai chargé saa7134-dvb et copié dvb-fe-tda10046.fw dans /lib/firmware

$ dmesg
[    0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000008000 end: 000000003fff8000 type: 3
[    0.000000] copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: 0000000040000000 type: 4
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000fb930
[    0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   262128
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   262128
[    0.000000] On node 0 totalpages: 262128
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 255 pages used for memmap
[    0.000000]   HighMem zone: 32497 pages, LIFO batch:7
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 AMI                                   ) @ 0x000fa940
[    0.000000] ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x3fff0000
[    0.000000] ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x3fff0030
[    0.000000] ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x3fff00c0
[    0.000000] ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:10 APIC version 16
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] Detected 1150.074 MHz processor.
[   17.120272] Built 1 zonelists.  Total pages: 260081
[   17.120278] Kernel command line: root=UUID=b2bb7dbf-a6b2-4572-b402-56e0a6da4bdb ro quiet splash locale=fr_FR
[   17.120572] mapped APIC to ffffd000 (fee00000)
[   17.120577] mapped IOAPIC to ffffc000 (fec00000)
[   17.120583] Enabling fast FPU save and restore... done.
[   17.120587] Enabling unmasked SIMD FPU exception support... done.
[   17.120605] Initializing CPU#0
[   17.120699] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   17.121816] Console: colour VGA+ 80x25
[   17.122955] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   17.123866] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   17.175781] Memory: 1028316k/1048512k available (1992k kernel code, 19432k reserved, 893k data, 328k init, 131008k highmem)
[   17.175799] virtual kernel memory layout:
[   17.175801]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   17.175803]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   17.175806]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   17.175808]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   17.175810]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   17.175812]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   17.175815]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   17.175821] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   17.252654] Calibrating delay using timer specific routine.. 2302.61 BogoMIPS (lpj=4605229)
[   17.252736] Security Framework v1.0.0 initialized
[   17.252751] SELinux:  Disabled at boot.
[   17.252782] Mount-cache hash table entries: 512
[   17.253064] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[   17.253080] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   17.253084] CPU: L2 Cache: 512K (64 bytes/line)
[   17.253090] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[   17.253110] Compat vDSO mapped to ffffe000.
[   17.253120] Remapping vsyscall page to ffffe000
[   17.253139] Checking 'hlt' instruction... OK.
[   17.268905] SMP alternatives: switching to UP code
[   17.269411] Freeing SMP alternatives: 11k freed
[   17.269830] Early unpacking initramfs... done
[   17.787310] ACPI: Core revision 20060707
[   17.789862] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   17.792636] CPU0: AMD Athlon(tm) XP stepping 00
[   17.792671] Total of 1 processors activated (2302.61 BogoMIPS).
[   17.793420] ENABLING IO-APIC IRQs
[   17.793751] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   17.940465] Brought up 1 CPUs
[   17.940899] Booting paravirtualized kernel on bare hardware
[   17.941022] Time: 11:14:46  Date: 03/29/107
[   17.941079] NET: Registered protocol family 16
[   17.941249] EISA bus registered
[   17.941257] ACPI: bus type pci registered
[   17.945750] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[   17.945755] PCI: Using configuration type 1
[   17.945757] Setting up standard PCI resources
[   17.958168] ACPI: Interpreter enabled
[   17.958173] ACPI: Using IOAPIC for interrupt routing
[   17.958793] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   17.958801] PCI: Probing PCI hardware (bus 00)
[   17.960408] PCI quirk: region 0800-087f claimed by vt8235 PM
[   17.960414] PCI quirk: region 0400-040f claimed by vt8235 SMB
[   17.960698] Boot video device is 0000:01:00.0
[   17.960800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   17.968085] ACPI: Power Resource [URP1] (off)
[   17.968195] ACPI: Power Resource [URP2] (off)
[   17.968297] ACPI: Power Resource [FDDP] (off)
[   17.968432] ACPI: Power Resource [LPTP] (off)
[   17.969476] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   17.969829] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   17.970175] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   17.970526] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   17.970758] Linux Plug and Play Support v0.97 (c) Adam Belay
[   17.970784] pnp: PnP ACPI init
[   17.975708] pnp: PnP ACPI: found 12 devices
[   17.975716] PnPBIOS: Disabled by ACPI PNP
[   17.975805] PCI: Using ACPI for IRQ routing
[   17.975810] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   17.978634] NET: Registered protocol family 8
[   17.978638] NET: Registered protocol family 20
[   17.979251] PCI: Bridge: 0000:00:01.0
[   17.979257]   IO window: c000-cfff
[   17.979264]   MEM window: dfe00000-dfefffff
[   17.979270]   PREFETCH window: 9fd00000-dfcfffff
[   17.979293] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   17.979340] NET: Registered protocol family 2
[   18.016520] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   18.016897] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   18.019502] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   18.020850] TCP: Hash tables configured (established 131072 bind 65536)
[   18.020855] TCP reno registered
[   18.032600] checking if image is initramfs... it is
[   19.012241] Freeing initrd memory: 6750k freed
[   19.013053] audit: initializing netlink socket (disabled)
[   19.013078] audit(1177845286.972:1): initialized
[   19.013191] highmem bounce pool size: 64 pages
[   19.013291] VFS: Disk quotas dquot_6.5.1
[   19.013328] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   19.013416] io scheduler noop registered
[   19.013421] io scheduler anticipatory registered
[   19.013425] io scheduler deadline registered
[   19.013438] io scheduler cfq registered (default)
[   19.013873] isapnp: Scanning for PnP cards...
[   19.367810] isapnp: No Plug & Play device found
[   19.409958] Real Time Clock Driver v1.12ac
[   19.410048] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   19.410211] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   19.410407] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   19.411259] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   19.411599] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   19.411973] mice: PS/2 mouse device common for all mice
[   19.412912] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   19.413318] input: Macintosh mouse button emulation as /class/input/input0
[   19.413375] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   19.413382] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   19.413709] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   19.414043] serio: i8042 KBD port at 0x60,0x64 irq 1
[   19.414051] serio: i8042 AUX port at 0x60,0x64 irq 12
[   19.414241] EISA: Probing bus 0 at eisa.0
[   19.414291] EISA: Detected 0 cards.
[   19.444599] TCP cubic registered
[   19.444611] NET: Registered protocol family 1
[   19.444648] Using IPI No-Shortcut mode
[   19.444763] ACPI: (supports S0 S1 S4 S5)
[   19.444831]   Magic number: 3:500:227
[   19.444946]   hash matches device ttyre
[   19.445804] Freeing unused kernel memory: 328k freed
[   19.447794] Time: tsc clocksource has been installed.
[   19.464015] input: AT Translated Set 2 keyboard as /class/input/input1
[   20.803478] Capability LSM initialized
[   21.670047] usbcore: registered new interface driver usbfs
[   21.670089] usbcore: registered new interface driver hub
[   21.670137] usbcore: registered new device driver usb
[   21.671534] USB Universal Host Controller Interface driver v3.0
[   21.671639] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
[   21.671661] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   21.671941] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   21.671986] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e000
[   21.672201] usb usb1: configuration #1 chosen from 1 choice
[   21.672247] hub 1-0:1.0: USB hub found
[   21.672265] hub 1-0:1.0: 2 ports detected
[   21.779110] ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 21 (level, low) -> IRQ 16
[   21.779133] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   21.779180] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   21.779214] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e400
[   21.779387] usb usb2: configuration #1 chosen from 1 choice
[   21.779441] hub 2-0:1.0: USB hub found
[   21.779458] hub 2-0:1.0: 2 ports detected
[   21.811337] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[   21.811341]   originally by Donald Becker <becker@scyld.com>
[   21.811344]   http://www.scyld.com/network/natsemi.html
[   21.811346]   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[   21.818319] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[   21.887004] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16
[   21.887027] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   21.887083] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   21.887117] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e800
[   21.887291] usb usb3: configuration #1 chosen from 1 choice
[   21.887334] hub 3-0:1.0: USB hub found
[   21.887351] hub 3-0:1.0: 2 ports detected
[   21.965967] Floppy drive(s): fd0 is 1.44M
[   21.995864] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16
[   21.995889] ehci_hcd 0000:00:10.3: EHCI Host Controller
[   21.995937] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   21.996018] ehci_hcd 0000:00:10.3: irq 16, io mem 0xdfffe700
[   21.996028] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   21.996159] usb usb4: configuration #1 chosen from 1 choice
[   21.996203] hub 4-0:1.0: USB hub found
[   21.996221] hub 4-0:1.0: 6 ports detected
[   22.007979] FDC 0 is a post-1991 82077
[   22.104802] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 17
[   22.106630] natsemi eth0: NatSemi DP8381[56] at 0xdffff000 (0000:00:07.0), 00:14:6c:30:6b:48, IRQ 17, port TP.
[   22.107156] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18
[   22.111164] eth1: VIA Rhine II at 0x1d800, 00:0c:76:41:43:5b, IRQ 18.
[   22.111885] eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[   22.114176] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[   22.114197] ACPI: Unable to derive IRQ for device 0000:00:11.1
[   22.114202] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[   22.114214] VP_IDE: chipset revision 6
[   22.114218] VP_IDE: not 100% native mode: will probe irqs later
[   22.114234] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[   22.114247]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[   22.114268]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[   22.114282] Probing IDE interface ide0...
[   22.542618] hda: WDC WD400BB-23FJA0, ATA DISK drive
[   22.830500] hdb: Maxtor 6L300R0, ATA DISK drive
[   22.893601] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   22.926786] Probing IDE interface ide1...
[   23.146281] usb 2-2: new full speed USB device using uhci_hcd and address 2
[   23.341460] usb 2-2: configuration #1 chosen from 1 choice
[   23.810102] hdc: TSSTcorpCD/DVDW SH-W162C, ATAPI CD/DVD-ROM drive
[   24.597780] hdd: HL-DT-ST CD-RW GCE-8522B, ATAPI CD/DVD-ROM drive
[   24.658314] ide1 at 0x170-0x177,0x376 on irq 15
[   24.682093] SCSI subsystem initialized
[   24.691924] libata version 2.20 loaded.
[   24.708141] hda: max request size: 128KiB
[   24.723042] hda: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[   24.723820] hda: cache flushes supported
[   24.723910]  hda: hda1 hda2 hda3
[   24.750362] hdb: max request size: 512KiB
[   24.751920] hdb: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
[   24.753484] hdb: cache flushes supported
[   24.753532]  hdb: hdb2
[   24.794157] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[   24.794175] Uniform CD-ROM driver Revision: 3.20
[   24.837309] hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[   25.164799] Attempting manual resume
[   25.164808] swsusp: Resume From Partition 3:2
[   25.164811] PM: Checking swsusp image.
[   25.165037] PM: Resume from disk failed.
[   25.207849] kjournald starting.  Commit interval 5 seconds
[   25.207871] EXT3-fs: mounted filesystem with ordered data mode.
[   35.472583] eth0: DSPCFG accepted after 0 usec.
[   35.472595] eth0: link up.
[   35.472605] eth0: Setting full-duplex based on negotiated link capability.
[   35.475942] eth1: link down
[   37.044140] NET: Registered protocol family 17
[   38.086891] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   38.089555] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   38.149432] Linux video capture interface: v2.00
[   38.730164] saa7130/34: v4l2 driver version 0.2.14 loaded
[   38.730291] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
[   38.730306] saa7133[0]: found at 0000:00:08.0, rev: 209, irq: 19, latency: 32, mmio: 0xdfffe800
[   38.730316] saa7133[0]: subsystem: 0070:6701, board: Pinnacle PCTV 310i [card=101,insmod option]
[   38.730330] saa7133[0]: board init: gpio is 6400000
[   38.848068] input: Pinnacle PCTV as /class/input/input2
[   38.848143] ir-kbd-i2c: Pinnacle PCTV detected at i2c-0/0-0071/ir0 [saa7133[0]]
[   38.899916] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   38.899934] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   38.899946] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[   38.899957] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   38.899968] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[   38.899979] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   38.899989] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   38.899999] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   39.067795] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[   39.127771] tuner 0-004b: setting tuner address to 61
[   39.175775] tuner 0-004b: type set to tda8290+75a
[   39.204856] Linux agpgart interface v0.102 (c) Dave Jones
[   39.250505] irda_init()
[   39.250551] NET: Registered protocol family 23
[   39.925971] input: PC Speaker as /class/input/input3
[   39.971107] /home/robertocarlos14/v4l-dvb/v4l/quickcam_messenger.c: Logitech Quickcam Messenger USB v0.01
[   40.111902] videodev: "QCM USB Camera" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
[   40.111914] /home/robertocarlos14/v4l-dvb/v4l/usbvideo.c: QCM on /dev/video0: canvas=320x240 videosize=320x240
[   40.112034] input: QCM button as /class/input/input4
[   40.112184] usbcore: registered new interface driver QCM
[   40.158315] input: ImExPS/2 Logitech MX Mouse as /class/input/input5
[   40.218022] usbcore: registered new interface driver snd-usb-audio
[   40.341611] parport: PnPBIOS parport detected.
[   40.341732] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   40.823084] tuner 0-004b: setting tuner address to 61
[   40.871066] tuner 0-004b: type set to tda8290+75a
[   42.433643] saa7133[0]: registered device video1 [v4l2]
[   42.433872] saa7133[0]: registered device vbi0
[   42.434095] saa7133[0]: registered device radio0
[   42.535352] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[   42.546316] agpgart: AGP aperture is 128M @ 0xe0000000
[   42.566722] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20
[   42.566880] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   42.581614] saa7134 ALSA driver for DMA sound loaded
[   42.583094] saa7133[0]/alsa: saa7133[0] at 0xdfffe800 irq 19 registered as card -2
[   42.725302] DVB: registering new adapter (saa7133[0]).
[   42.725315] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[   42.822261] tda1004x: setting up plls for 48MHz sampling clock
[   43.186245] tda1004x: found firmware revision 20 -- ok
[   43.305111] lp0: using parport0 (interrupt-driven).
[   43.369914] fuse init (API version 7.8)
[   43.772946] Adding 3237088k swap on /dev/disk/by-uuid/75ffa41e-1797-4b9b-adaa-1407df61a48f.  Priority:-1 extents:1 across:3237088k
[   43.870568] EXT3 FS on hda1, internal journal
[   44.125338] NET: Registered protocol family 10
[   44.125528] lo: Disabled Privacy Extensions
[   44.125791] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   44.408470] kjournald starting.  Commit interval 5 seconds
[   44.408792] EXT3 FS on hdb2, internal journal
[   44.408802] EXT3-fs: mounted filesystem with ordered data mode.
[   49.644483] input: Power Button (FF) as /class/input/input6
[   49.651873] ACPI: Power Button (FF) [PWRF]
[   49.720494] input: Power Button (CM) as /class/input/input7
[   49.727790] ACPI: Power Button (CM) [PWRB]
[   49.775529] input: Sleep Button (CM) as /class/input/input8
[   49.775998] ACPI: Sleep Button (CM) [SLPB]
[   49.826760] Using specific hotkey driver
[   49.881499] No dock devices found.
[   49.966172] ibm_acpi: ec object not found
[   50.163367] pcc_acpi: loading...
[   54.365564] eth0: no IPv6 routers present
[   64.219010] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   64.231631] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[   64.232154] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[   64.479138] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[   64.521916] ppdev: user-space parallel port driver
[   67.563018] [fglrx] Internal AGP support requested, but kernel AGP support active.
[   67.563037] [fglrx] Have to use kernel AGP support to avoid conflicts.
[   67.563044] [fglrx] AGP detected, AgpState   = 0x1f000a0b (hardware caps of chipset)
[   67.564347] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[   67.564665] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   67.565034] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   67.565381] [fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[   67.580780] [fglrx] total      GART = 134217728
[   67.580795] [fglrx] free       GART = 118222848
[   67.580799] [fglrx] max single GART = 118222848
[   67.580803] [fglrx] total      LFB  = 134217728
[   67.580806] [fglrx] free       LFB  = 116387840
[   67.580810] [fglrx] max single LFB  = 116387840
[   67.580813] [fglrx] total      Inv  = 0
[   67.580816] [fglrx] free       Inv  = 0
[   67.580818] [fglrx] max single Inv  = 0
[   67.580821] [fglrx] total      TIM  = 0
[   67.732748] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   67.732759] apm: overridden by ACPI.
[   70.778655] Bluetooth: Core ver 2.11
[   70.778771] NET: Registered protocol family 31
[   70.778775] Bluetooth: HCI device and connection manager initialized
[   70.778782] Bluetooth: HCI socket layer initialized
[   70.968551] Bluetooth: L2CAP ver 2.8
[   70.968560] Bluetooth: L2CAP socket layer initialized
[   70.983188] Bluetooth: RFCOMM socket layer initialized
[   70.983217] Bluetooth: RFCOMM TTY layer initialized
[   70.983221] Bluetooth: RFCOMM ver 1.8
[   78.711647] eth0: no IPv6 routers present
[   84.740148] ISO 9660 Extensions: Microsoft Joliet Level 3
[   84.796963] ISOFS: changing to secondary root
[  155.756268] tda1004x: setting up plls for 48MHz sampling clock
[  156.040152] tda1004x: found firmware revision 20 -- ok
[  166.387939] tda1004x: setting up plls for 48MHz sampling clock
[  166.671830] tda1004x: found firmware revision 20 -- ok
[  307.742808] /home/robertocarlos14/v4l-dvb/v4l/usbvideo.c: Packet Statistics: Total=64. Empty=0. Usage=100%
[  307.742819] /home/robertocarlos14/v4l-dvb/v4l/usbvideo.c: Transfer Statistics: Transferred=0 B Usage=0%
[  372.400045] tda1004x: setting up plls for 48MHz sampling clock
[  372.787888] tda1004x: found firmware revision 20 -- ok

3) Mon probleme principal :mad::mad:
J'ai testé ta ligne de commande et mis le résultat ci-dessous.
J'ai une fenêtre noir pour mplayer.

$ mplayer  tv:// -tv driver=v4l2:device=/dev/video1:input=1
MPlayer 2:1.0~rc1-0ubuntu9 (C) 2000-2006 MPlayer Team
CPU: AMD Athlon(tm) XP (Family: 6, Model: 10, Stepping: 0)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing tv://.
TV file format detected.
Selected driver: v4l2
 name: Video 4 Linux 2 input
 author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
 comment: first try, more to come ;-)
Selected device: Pinnacle PCTV 310i
 Tuner cap: STEREO LANG1 LANG2
 Tuner rxs: MONO
 Capabilites:  video capture  video overlay  VBI capture device  tuner  read/write  streaming
 supported norms: 0 = PAL; 1 = PAL-BG; 2 = PAL-I; 3 = PAL-DK; 4 = NTSC; 5 = SECAM; 6 = SECAM-DK; 7 = SECAM-L; 8 = SECAM-Lc; 9 = PAL-M; 10 = PAL-Nc; 11 = PAL-60;
 inputs: 0 = Television; 1 = Composite1; 2 = Composite2; 3 = S-Video;
 Current input: 1
 Current format: BGR24
v4l2: current audio mode is : MONO
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: No such file or directory.
[VO_3DFX] Unable to open /dev/3dfx.
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x480 => 640x480 Planar YV12 
Selected video codec: [rawyv12] vfm: raw (RAW YV12)
==========================================================================
Audio: no sound
Starting playback...
No bind found for key 'c'.                         
v4l2: 113 frames successfully processed, 9 frames dropped.

Exiting... (Quit)

Merci pour ta réponse

tomlohave · Le 29/04/2007, à 14:26

[ 38.730316] saa7133[0]: subsystem: 0070:6701, board: Pinnacle PCTV 310i [card=101,insmod option]

Je suis pris d'un gros doute là ...

tu as quelle carte et quels sont les paramètres que tu as passé au noyau ?

Dans tous les cas

1) sous feisty, il est INUTILE de recompiler les drivers
2) Ta carte que ce soit hvr1110 ou bien pctv310i est automatiquement détectée
3) ton dernier problème vient de ce qu'il y a plus haut ...

Robertocarlos7 · Le 29/04/2007, à 18:07

Merci beaucoup pour ta réponse !!!
Finalement, j'ai réinstallé proprement feisty en rajoutant uniquement le firmware dvb-fe-tda10046.fw dans /lib/firmware et chargé saa7134-dvb dans /etc/modules => En lancant ta commande mplayer, j'obtenais l'image en noir et blanc.
Enfin, j'ai trouvé la ligne de commande suivante :

mplayer tv:// -tv driver=v4l2:device=/dev/video0:norm=secam:input=1:width=720:height=578 -vo x11 -vop pp=lb

:D:D Nickel : image en couleur. Pour le son, j'utilise ma chaine hifi.
Merci beaucoup pour ton aide, je vais pouvoir regarder Bordeaux-Lens sur mon Ubuntu. :cool::cool:

tomlohave · Le 29/04/2007, à 19:03

en noir et blanc : cela ressemble à du pal ...

ravi d'avoir pu t'aider ...

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#126 Le 13/01/2007, à 19:10

Re : hvr1110 = hvr1100 + saa713x, installation ici

#127 Le 14/01/2007, à 00:21

Re : hvr1110 = hvr1100 + saa713x, installation ici

#128 Le 14/01/2007, à 13:01

Re : hvr1110 = hvr1100 + saa713x, installation ici

#129 Le 15/01/2007, à 19:09

Re : hvr1110 = hvr1100 + saa713x, installation ici

#130 Le 15/01/2007, à 20:00

Re : hvr1110 = hvr1100 + saa713x, installation ici

#131 Le 17/01/2007, à 00:08

Re : hvr1110 = hvr1100 + saa713x, installation ici

#132 Le 21/01/2007, à 15:21

Re : hvr1110 = hvr1100 + saa713x, installation ici

#133 Le 07/02/2007, à 21:18

Re : hvr1110 = hvr1100 + saa713x, installation ici

#134 Le 09/02/2007, à 20:35

Re : hvr1110 = hvr1100 + saa713x, installation ici

#135 Le 09/02/2007, à 21:18

Re : hvr1110 = hvr1100 + saa713x, installation ici

#136 Le 10/02/2007, à 20:17

Re : hvr1110 = hvr1100 + saa713x, installation ici

#137 Le 10/02/2007, à 20:25

Re : hvr1110 = hvr1100 + saa713x, installation ici

#138 Le 10/02/2007, à 23:02

Re : hvr1110 = hvr1100 + saa713x, installation ici

#139 Le 11/02/2007, à 00:00

Re : hvr1110 = hvr1100 + saa713x, installation ici

#140 Le 11/02/2007, à 09:30

Re : hvr1110 = hvr1100 + saa713x, installation ici

#141 Le 11/02/2007, à 12:58

Re : hvr1110 = hvr1100 + saa713x, installation ici

#142 Le 11/02/2007, à 13:07

Re : hvr1110 = hvr1100 + saa713x, installation ici

#143 Le 11/02/2007, à 13:08

Re : hvr1110 = hvr1100 + saa713x, installation ici

#144 Le 11/02/2007, à 13:17

Re : hvr1110 = hvr1100 + saa713x, installation ici

#145 Le 28/04/2007, à 15:56

Re : hvr1110 = hvr1100 + saa713x, installation ici

#146 Le 29/04/2007, à 07:01

Re : hvr1110 = hvr1100 + saa713x, installation ici

#147 Le 29/04/2007, à 11:33

Re : hvr1110 = hvr1100 + saa713x, installation ici

#148 Le 29/04/2007, à 14:26

Re : hvr1110 = hvr1100 + saa713x, installation ici

#149 Le 29/04/2007, à 18:07

Re : hvr1110 = hvr1100 + saa713x, installation ici

#150 Le 29/04/2007, à 19:03

Re : hvr1110 = hvr1100 + saa713x, installation ici

Pied de page des forums