Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2

#1 Le 06/12/2011, à 01:46

thierclap

Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

Bonjour
depuis des mois j'essaie d'installer mon pilote rt2870 pour une cle wifi

mais lorsque je fais make j'ai à la fin une erreur

make :*** [LINUX] erreur 2


pouvez vous m'aider à résoudre le probléme .

Hors ligne

#2 Le 06/12/2011, à 02:04

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

salut
post le resultat des commandes

lspci
lsmod
uname -r -m

Dernière modification par chibbata (Le 06/12/2011, à 02:06)

Hors ligne

#3 Le 07/12/2011, à 00:05

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

merci de me répondre chibbata


boici les résultats des commandes que tu m'a demandé




:~$ lspci
0000:f0:0b.0 Host bridge: Apple Computer Inc. U3L AGP Bridge
0000:f0:10.0 VGA compatible controller: nVidia Corporation NV34M [GeForce FX Go5200] (rev a1)
0001:00:00.0 Host bridge: Apple Computer Inc. U4 PCIe
0001:00:01.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:00:02.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:00:03.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:01:07.0 Unassigned class [ff00]: Apple Computer Inc. Shasta Mac I/O
0001:01:0b.0 USB Controller: NEC Corporation USB (rev 43)
0001:01:0b.1 USB Controller: NEC Corporation USB (rev 43)
0001:01:0b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0001:02:0c.0 IDE interface: Broadcom K2 SATA
0001:02:0d.0 Unassigned class [ff00]: Apple Computer Inc. Shasta IDE
0001:02:0e.0 FireWire (IEEE 1394): Apple Computer Inc. Shasta Firewire
0001:03:0f.0 Ethernet controller: Apple Computer Inc. Shasta (Sun GEM)


~$ lsmod
Module                  Size  Used by
nls_iso8859_1           5737  1
nls_cp437               7443  1
vfat                   17100  1
fat                    83364  1 vfat
binfmt_misc            13639  1
parport_pc             52958  0
ppdev                  11165  0
lp                     16388  0
parport                56318  3 parport_pc,ppdev,lp
ipv6                  440399  14
nouveau               754181  2
snd_aoa_codec_onyx     19547  2
snd_aoa_fabric_layout    17002  2
snd_aoa                25610  2 snd_aoa_codec_onyx,snd_aoa_fabric_layout
snd_aoa_i2sbus         30687  1
snd_aoa_soundbus        8333  2 snd_aoa_fabric_layout,snd_aoa_i2sbus
snd_powermac           94931  0
snd_pcm               140019  2 snd_aoa_i2sbus,snd_powermac
snd_page_alloc         11493  1 snd_pcm
ttm                   101153  1 nouveau
snd_seq_midi           10063  0
drm_kms_helper         44948  1 nouveau
snd_rawmidi            36634  1 snd_seq_midi
snd_seq_midi_event     11697  1 snd_seq_midi
snd_seq                95016  2 snd_seq_midi,snd_seq_midi_event
drm                   296562  4 nouveau,ttm,drm_kms_helper
snd_timer              36414  2 snd_pcm,snd_seq
snd_seq_device         11305  3 snd_seq_midi,snd_rawmidi,snd_seq
evdev                  17447  4
pmac_zilog             33361  0
rtc_generic             3186  0
uninorth_agp           12951  1
serial_core            36427  1 pmac_zilog
agpgart                58767  3 ttm,drm,uninorth_agp
snd                   102374  14 snd_aoa_codec_onyx,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_powermac,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               2250  1 snd
windfarm_smu_sensors     8567  4
windfarm_smu_sat        8512  0 [permanent]
windfarm_smu_controls     7645  3
windfarm_max6690_sensor     5628  0
usbhid                 62618  0
windfarm_pm81          11593  0
sg                     48479  0
windfarm_pid            3577  1 windfarm_pm81
firewire_ohci          41462  0
windfarm_lm75_sensor     6083  1
hid                   105692  1 usbhid
usb_storage            67096  1
sd_mod                 54998  5
firewire_core          83237  1 firewire_ohci
windfarm_cpufreq_clamp     3829  1
sungem                 54082  0
sungem_phy             19346  1 sungem
crc_itu_t               1998  1 firewire_core
crc_t10dif              1795  1 sd_mod
windfarm_core          16027  7 windfarm_smu_sensors, windfarm_smu_sat, windfarm_smu_controls,windfarm_pm81, windfarm_max6690_sensor ,windfarm_lm75_sensor,windfarm_cpufreq_clamp



~$ uname -r -m
2.6.35-22-powerpc64-smp ppc64



je viens de réinstaller ubuntu 10.10 sur mon iMAC Powerpc

pour recommencer à zéro ;

Hors ligne

#4 Le 07/12/2011, à 00:09

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

sur le site de ralink http://www.ralinktech.com/en/04_support … php?sn=501
telecharges le driver RT2870USB(RT2870/RT2770)
il te demande un nom et un email,tu peux mettre un faux nom et un faux email
extraire le driver 2010_0709_RT2870_Linux_STA_v2.4.0.1.tar.bz2
ce qui genere un dossier nommé 2010_0709_RT2870_Linux_STA_v2.4.0.1
ouvres ce dossier puis le sous dossier os puis linux
click droit sur le fichier config.mk ouvrir avec gedit
modifie les lignes suivantes en remplaçant =n par =y

# Support Wpa_Supplicant
HAS_WPA_SUPPLICANT=n

# Support Native WpaSupplicant for Network Maganger
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n

enregistre le fichier et quittes gedit
ouvres le terminal

sudo apt-get install build-essential

je suppose que le dossier 2010_0709_RT2870_Linux_STA_v2.4.0.1 se trouve dans le dossier Téléchargements,si ce n'est pas le cas,il faut indiquer le bon chemin a la commande cd

cd ~/Téléchargements/2010_0709_RT2870_Linux_STA_v2.4.0.1
make
sudo make install

redemarres le pc

Hors ligne

#5 Le 07/12/2011, à 00:15

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

j'ai déjà installer build-essenial


j'ai aussi le fichier du driver 2010_0709_RT2870_Linux_STA_v2.4.0.1

je viens de modifier config.mk


je me mais sous linux
je fais les manip et je te mets au courant

Hors ligne

#6 Le 07/12/2011, à 00:22

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

si ça ne marche pas

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install linux-backports-modules-compat-wireless-2.6.38-maverick-generic

redemarres le pc

Hors ligne

#7 Le 07/12/2011, à 00:34

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

bon j'ai fais les commandes que tu m'a demandé de faire


voici les résultat et les erreur


 
biglover@themachine:~$ cd Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/


biglover@themachine:~/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1$ make

make -C tools
make[1]: entrant dans le répertoire « /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/tools »
gcc -g bin2h.c -o bin2h
make[1]: quittant le répertoire « /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/tools »
/home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/tools/bin2h
cp -f os/linux/Makefile.6 /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/Makefile
make -C /lib/modules/2.6.35-22-powerpc64-smp/build SUBDIRS=/home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.35-22-powerpc64-smp »
  CC [M]  /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.o
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu.h:125,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/lppaca.h:37,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/paca.h:21,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/hw_irq.h:17,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/irqflags.h:11,
                 from include/linux/irqflags.h:57,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/system.h:8,
                 from include/linux/list.h:7,
                 from include/linux/module.h:9,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:40,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h: In function ‘hpte_encode_v’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:188: warning: left shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h: In function ‘hpte_encode_r’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:203: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h: In function ‘hpt_va’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:220: warning: left shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:220: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h: In function ‘hpt_hash’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:235: warning: right shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:236: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:238: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h: In function ‘get_kernel_vsid’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:453: error: ‘SID_SHIFT’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:453: error: (Each undeclared identifier is reported only once
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:453: error: for each function it appears in.)
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:453: warning: right shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:453: warning: left shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:453: warning: right shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:453: warning: left shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:454: error: ‘SID_SHIFT_1T’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h: In function ‘user_segment_size’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:461: error: ‘SID_SHIFT_1T’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h: In function ‘get_vsid’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:471: error: ‘SID_SHIFT’ undeclared (first use in this function)
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:471: warning: right shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:471: warning: left shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:471: warning: right shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:471: warning: left shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/mmu-hash64.h:473: error: ‘SID_SHIFT_1T’ undeclared (first use in this function)
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/spinlock.h:26,
                 from include/linux/spinlock.h:86,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/stat.h:60,
                 from include/linux/module.h:10,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:40,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h: In function ‘HvCall_setVirtualDecr’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h:85: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h: In function ‘HvCall_yieldProcessor’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h:90: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h: In function ‘HvCall_setEnabledInterrupts’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h:95: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h: In function ‘HvCall_setLogBufferFormatAndCodepage’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h:101: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h: In function ‘HvCall_sendIPI’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/iseries/hv_call.h:108: warning: integer constant is too large for ‘unsigned long’ type
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/atomic.h:474,
                 from include/linux/spinlock.h:386,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/stat.h:60,
                 from include/linux/module.h:10,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:40,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
include/asm-generic/atomic64.h: At top level:
include/asm-generic/atomic64.h:17: error: conflicting types for ‘atomic64_t’
include/linux/types.h:197: note: previous declaration of ‘atomic64_t’ was here
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/cputime.h:29,
                 from include/linux/sched.h:68,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/elf.h:5,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:14,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:40,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/time.h: In function ‘get_tb’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/time.h:116: error: implicit declaration of function ‘mftb’
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/elf.h:5,
                 from include/linux/elf.h:7,
                 from include/linux/module.h:14,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:40,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
include/linux/sched.h: At top level:
include/linux/sched.h:204: error: implicit declaration of function ‘__ilog2_u64’
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/io.h:229,
                 from include/linux/io.h:22,
                 from include/linux/pci.h:54,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/eeh.h: In function ‘eeh_readq’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/eeh.h:143: error: implicit declaration of function ‘in_le64’
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/eeh.h: In function ‘eeh_readq_be’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/eeh.h:167: error: implicit declaration of function ‘in_be64’
In file included from include/linux/io.h:22,
                 from include/linux/pci.h:54,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/io.h: In function ‘virt_to_phys’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/io.h:697: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/io.h: In function ‘phys_to_virt’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/io.h:714: warning: integer constant is too large for ‘unsigned long’ type
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pgtable.h:23,
                 from include/linux/mm.h:40,
                 from include/linux/scatterlist.h:6,
                 from include/linux/dma-mapping.h:7,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci.h:15,
                 from include/linux/pci.h:1222,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pgtable-ppc64.h: At top level:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pgtable-ppc64.h:30: warning: "SID_SHIFT" is not defined
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pgtable-ppc64.h:31: error: #error TASK_SIZE_USER64 exceeds user VSID range
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pgtable.h:23,
                 from include/linux/mm.h:40,
                 from include/linux/scatterlist.h:6,
                 from include/linux/dma-mapping.h:7,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci.h:15,
                 from include/linux/pci.h:1222,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pgtable-ppc64.h: In function ‘find_linux_pte’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pgtable-ppc64.h:370: warning: right shift count >= width of type
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pgtable.h:200,
                 from include/linux/mm.h:40,
                 from include/linux/scatterlist.h:6,
                 from include/linux/dma-mapping.h:7,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci.h:15,
                 from include/linux/pci.h:1222,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
include/asm-generic/pgtable.h: In function ‘pud_none_or_clear_bad’:
include/asm-generic/pgtable.h:189: warning: integer constant is too large for ‘unsigned long’ type
include/asm-generic/pgtable.h: In function ‘pmd_none_or_clear_bad’:
include/asm-generic/pgtable.h:200: warning: integer constant is too large for ‘unsigned long’ type
In file included from include/linux/scatterlist.h:6,
                 from include/linux/dma-mapping.h:7,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci.h:15,
                 from include/linux/pci.h:1222,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
include/linux/mm.h: In function ‘is_vmalloc_addr’:
include/linux/mm.h:289: warning: integer constant is too large for ‘unsigned long’ type
include/linux/mm.h:289: warning: integer constant is too large for ‘unsigned long’ type
include/linux/mm.h: In function ‘virt_to_head_page’:
include/linux/mm.h:324: warning: left shift count >= width of type
include/linux/mm.h:324: warning: integer constant is too large for ‘unsigned long’ type
In file included from include/linux/scatterlist.h:6,
                 from include/linux/dma-mapping.h:7,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci.h:15,
                 from include/linux/pci.h:1222,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
include/linux/mm.h: In function ‘lowmem_page_address’:
include/linux/mm.h:599: warning: left shift count >= width of type
include/linux/mm.h:599: warning: integer constant is too large for ‘unsigned long’ type
In file included from include/linux/dma-mapping.h:7,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci.h:15,
                 from include/linux/pci.h:1222,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
include/linux/scatterlist.h: In function ‘sg_set_buf’:
include/linux/scatterlist.h:112: warning: left shift count >= width of type
include/linux/scatterlist.h:112: warning: integer constant is too large for ‘unsigned long’ type
include/linux/scatterlist.h: In function ‘sg_phys’:
include/linux/scatterlist.h:184: warning: left shift count >= width of type
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/dma-mapping.h:117,
                 from include/linux/dma-mapping.h:93,
                 from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci.h:15,
                 from include/linux/pci.h:1222,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
include/asm-generic/dma-mapping-common.h: In function ‘dma_map_single_attrs’:
include/asm-generic/dma-mapping-common.h:19: warning: left shift count >= width of type
include/asm-generic/dma-mapping-common.h:19: warning: integer constant is too large for ‘unsigned long’ type
include/asm-generic/dma-mapping-common.h:22: warning: left shift count >= width of type
include/asm-generic/dma-mapping-common.h:22: warning: integer constant is too large for ‘unsigned long’ type
In file included from /usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci.h:21,
                 from include/linux/pci.h:1222,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:50,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci-bridge.h: In function ‘isa_vaddr_is_ioport’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci-bridge.h:278: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci-bridge.h:278: warning: left shift count >= width of type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/pci-bridge.h:278: warning: integer constant is too large for ‘unsigned long’ type
In file included from include/net/checksum.h:25,
                 from include/linux/skbuff.h:28,
                 from include/linux/if_ether.h:125,
                 from include/linux/netdevice.h:29,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/os/rt_linux.h:51,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rtmp_os.h:42,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/include/rt_config.h:72,
                 from /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.c:28:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h: In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:339: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:339: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:340: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:340: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h: In function ‘copy_to_user’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:354: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:354: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:355: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:355: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h: In function ‘clear_user’:
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:449: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:449: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:450: warning: integer constant is too large for ‘unsigned long’ type
/usr/src/linux-headers-2.6.35-22-powerpc64-smp/arch/powerpc/include/asm/uaccess.h:450: warning: integer constant is too large for ‘unsigned long’ type
make[2]: *** [/home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/crypt_md5.o] Erreur 1
make[1]: *** [_module_/home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux] Erreur 2
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.35-22-powerpc64-smp »
make: *** [LINUX] Erreur 2


biglover@themachine:~/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1$ make install
make -C /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux -f Makefile.6 install
mkdir: ne peut créer le répertoire `/etc/Wireless': Permission non accordée
make[1]: entrant dans le répertoire « /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux »
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
mkdir: ne peut créer le répertoire `/etc/Wireless/RT2870STA': Aucun fichier ou dossier de ce type
make[1]: *** [install] Erreur 1
make[1]: quittant le répertoire « /home/biglover/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux »
make: *** [install] Erreur 2
biglover@themachine:~/Bureau/2010_0709_RT2870_Linux_STA_v2.4.0.1$


....



j'ai pas de connection éthernet sur ma machine
je ne peut pas mettre à jour mes paquets

néanmoins, je vais telecharger 

 linux-backports-modules-compat-wireless-2.6.38-maverick-generic

à partir du site

ports.ubuntu.com



en fait je suis en double boot MAC OS X (où maa clé wifi fo,ctionne ) et UBUNTU 10.10

Hors ligne

#8 Le 07/12/2011, à 01:02

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

http://www.orbit-lab.org/kernel/compat- … -2.tar.bz2
telecharges ce fichier et met le dans le dossier Documents de ubuntu

cd Documents
tar jxvf compat-wireless-2.6.38.2-2.tar.bz2
cd compat-wireless-2.6.38.2-2
make
sudo make install

redemarres le pc

si rien post le resultat de

lsmod

Hors ligne

#9 Le 07/12/2011, à 02:09

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

j'ai fais le make  qui à vraiment pris du temps


le make install donne des erreurs

biglover@themachine:~/Bureau/compat-wireless-2.6.38.2-2$ sudo make install
[sudo] password for biglover: 

Your old wireless subsystem modules were left intact:

kernel/net/mac80211/mac80211.ko
kernel/net/wireless/cfg80211.ko
kernel/net/wireless/lib80211.ko
kernel/drivers/net/wireless/adm8211.ko
kernel/drivers/net/wireless/ath/ar9170/ar9170usb.ko
kernel/drivers/net/wireless/at76c50x-usb.ko
kernel/drivers/net/wireless/ath/ath.ko
kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
kernel/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
kernel/drivers/net/wireless/b43/b43.ko
kernel/drivers/net/wireless/b43legacy/b43legacy.ko
kernel/drivers/net/b44.ko
kernel/drivers/net/usb/cdc_ether.ko
kernel/drivers/misc/eeprom/eeprom_93cx6.ko
kernel/drivers/net/wireless/ipw2x00/ipw2100.ko
kernel/drivers/net/wireless/ipw2x00/ipw2200.ko
kernel/drivers/net/wireless/iwlwifi/iwlagn.ko
kernel/drivers/net/wireless/iwlwifi/iwlcore.ko
kernel/drivers/net/wireless/iwmc3200wifi/iwmc3200wifi.ko
kernel/net/wireless/lib80211_crypt_ccmp.ko
kernel/net/wireless/lib80211_crypt_tkip.ko
kernel/net/wireless/lib80211_crypt_wep.ko
kernel/drivers/net/wireless/libertas/libertas.ko
kernel/drivers/net/wireless/libertas/libertas_cs.ko
kernel/drivers/net/wireless/libertas/libertas_sdio.ko
kernel/drivers/net/wireless/libertas/libertas_spi.ko
kernel/drivers/net/wireless/libertas_tf/libertas_tf.ko
kernel/drivers/net/wireless/libertas_tf/libertas_tf_usb.ko
kernel/drivers/net/wireless/ipw2x00/libipw.ko
kernel/drivers/net/wireless/mac80211_hwsim.ko
kernel/drivers/net/wireless/mwl8k.ko
kernel/drivers/net/wireless/orinoco/orinoco_cs.ko
kernel/drivers/net/wireless/orinoco/orinoco_usb.ko
kernel/drivers/net/wireless/orinoco/orinoco.ko
kernel/drivers/net/wireless/p54/p54common.ko
kernel/drivers/net/wireless/p54/p54pci.ko
kernel/drivers/net/wireless/p54/p54spi.ko
kernel/drivers/net/wireless/p54/p54usb.ko
kernel/drivers/net/usb/rndis_host.ko
kernel/drivers/net/wireless/rt2x00/rt2400pci.ko
kernel/drivers/net/wireless/rt2x00/rt2500pci.ko
kernel/drivers/net/wireless/rt2x00/rt2500usb.ko
kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
kernel/drivers/net/wireless/rt2x00/rt2800usb.ko
kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko
kernel/drivers/net/wireless/rt2x00/rt61pci.ko
kernel/drivers/net/wireless/rt2x00/rt73usb.ko
kernel/drivers/net/wireless/rtl818x/rtl8187.ko
kernel/drivers/net/wireless/orinoco/spectrum_cs.ko
kernel/drivers/ssb/ssb.ko
kernel/drivers/net/wireless/libertas/usb8xxx.ko
kernel/drivers/net/usb/usbnet.ko
kernel/drivers/net/wireless/wl12xx/wl1251.ko
kernel/drivers/net/wireless/zd1211rw/zd1211rw.ko

Your old ethernet subsystem modules are left intact:

kernel/drivers/net/atlx/atl1.ko
kernel/drivers/net/atlx/atl2.ko
kernel/drivers/net/atl1e/atl1e.ko
kernel/drivers/net/atl1c/atl1c.ko

Your old bluetooth subsystem modules were left intact:

updates/drivers/bluetooth/ath3k.ko
updates/drivers/bluetooth/bcm203x.ko
updates/drivers/bluetooth/bluecard_cs.ko
updates/net/bluetooth/bluetooth.ko
updates/net/bluetooth/bnep/bnep.ko
updates/drivers/bluetooth/bpa10x.ko
updates/drivers/bluetooth/bt3c_cs.ko
updates/drivers/bluetooth/btmrvl.ko
updates/drivers/bluetooth/btmrvl_sdio.ko
updates/drivers/bluetooth/btsdio.ko
updates/drivers/bluetooth/btusb.ko
updates/drivers/bluetooth/btuart_cs.ko
updates/drivers/bluetooth/dtl1_cs.ko
updates/net/bluetooth/hidp/hidp.ko
updates/drivers/bluetooth/hci_vhci.ko
updates/drivers/bluetooth/hci_uart.ko
updates/net/bluetooth/l2cap.ko
updates/net/bluetooth/rfcomm/rfcomm.ko
updates/net/bluetooth/sco.ko

make -C /lib/modules/2.6.35-22-powerpc64-smp/build M=/home/biglover/Bureau/compat-wireless-2.6.38.2-2 modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.35-22-powerpc64-smp »
  Building modules, stage 2.
  MODPOST 103 modules
WARNING: ".wl12xx_get_platform_data" [/home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/wl1251/wl1251_sdio.ko] undefined!
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.35-22-powerpc64-smp »
make -C /lib/modules/2.6.35-22-powerpc64-smp/build M=/home/biglover/Bureau/compat-wireless-2.6.38.2-2 "INSTALL_MOD_DIR=updates"  \
        modules_install
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.35-22-powerpc64-smp »
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/compat/compat.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/compat/kfifo.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/ath3k.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/bcm203x.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/bfusb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/bluecard_cs.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/bpa10x.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/bt3c_cs.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/btmrvl.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/btmrvl_sdio.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/btsdio.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/btuart_cs.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/btusb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/dtl1_cs.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/hci_uart.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/bluetooth/hci_vhci.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/misc/eeprom/eeprom_93cx6.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/atl1c/atl1c.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/atl1e/atl1e.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/atlx/atl1.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/atlx/atl2.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/b44.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/usb/cdc_ether.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/usb/rndis_host.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/usb/usbnet.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/adm8211.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/at76c50x-usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ath/ar9170/ar9170usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ath/ath.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ath/ath5k/ath5k.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ath/ath9k/ath9k.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ath/ath9k/ath9k_common.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ath/carl9170/carl9170.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/b43/b43.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/b43legacy/b43legacy.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ipw2x00/ipw2100.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ipw2x00/ipw2200.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/ipw2x00/libipw.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/iwlwifi/iwl3945.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/iwlwifi/iwlagn.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/iwlwifi/iwlcore.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/iwmc3200wifi/iwmc3200wifi.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/libertas/libertas.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/libertas/libertas_cs.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/libertas/libertas_sdio.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/libertas/libertas_spi.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/libertas/usb8xxx.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/libertas_tf/libertas_tf.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/libertas_tf/libertas_tf_usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/mac80211_hwsim.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/mwl8k.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/airport.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/orinoco.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/orinoco_cs.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/orinoco_nortel.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/orinoco_pci.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/orinoco_plx.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/orinoco_tmd.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/orinoco_usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/orinoco/spectrum_cs.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/p54/p54common.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/p54/p54pci.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/p54/p54spi.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/p54/p54usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rndis_wlan.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2400pci.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2500pci.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2500usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2800lib.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2800pci.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2800usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2x00lib.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2x00pci.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt2x00usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt61pci.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rt2x00/rt73usb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rtl818x/rtl8180/rtl8180.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rtl818x/rtl8187/rtl8187.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192ce.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/rtlwifi/rtlwifi.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/wl1251/wl1251.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/wl1251/wl1251_sdio.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/wl1251/wl1251_spi.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/wl12xx/wl12xx.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/wl12xx/wl12xx_spi.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/net/wireless/zd1211rw/zd1211rw.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/ssb/ssb.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/staging/ath6kl/ath6kl.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/drivers/staging/brcm80211/brcm80211.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/bluetooth/bluetooth.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/bluetooth/bnep/bnep.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/bluetooth/hidp/hidp.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/bluetooth/l2cap.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/bluetooth/rfcomm/rfcomm.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/bluetooth/sco.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/mac80211/mac80211.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/wireless/cfg80211.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/wireless/lib80211.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/wireless/lib80211_crypt_ccmp.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/wireless/lib80211_crypt_tkip.ko
  INSTALL /home/biglover/Bureau/compat-wireless-2.6.38.2-2/net/wireless/lib80211_crypt_wep.ko
  DEPMOD  2.6.35-22-powerpc64-smp
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.35-22-powerpc64-smp »
Updating Ubuntu's initramfs for 2.6.35-22-powerpc64-smp under /boot/ ...
Will now run update-grub to ensure grub will find the new initramfs ...
./scripts/update-initramfs: line 22: update-grub : commande introuvable
make: *** [install-modules] Erreur 127

le lsmod n'a pas trop changer 

biglover@themachine:~$ lsmod
Module                  Size  Used by
nls_iso8859_1           5737  1 
nls_cp437               7443  1 
vfat                   17100  1 
fat                    83364  1 vfat
binfmt_misc            13639  1 
parport_pc             52958  0 
ppdev                  11165  0 
lp                     16388  0 
parport                56318  3 parport_pc,ppdev,lp
ipv6                  440399  14 
nouveau               754181  2 
snd_aoa_codec_onyx     19547  2 
snd_aoa_fabric_layout    17002  2 
snd_aoa                25610  2 snd_aoa_codec_onyx,snd_aoa_fabric_layout
snd_aoa_i2sbus         30687  1 
snd_aoa_soundbus        8333  2 snd_aoa_fabric_layout,snd_aoa_i2sbus
snd_powermac           94931  0 
snd_pcm               140019  2 snd_aoa_i2sbus,snd_powermac
ttm                   101153  1 nouveau
snd_page_alloc         11493  1 snd_pcm
snd_seq_midi           10063  0 
drm_kms_helper         44948  1 nouveau
snd_rawmidi            36634  1 snd_seq_midi
snd_seq_midi_event     11697  1 snd_seq_midi
drm                   296562  4 nouveau,ttm,drm_kms_helper
snd_seq                95016  2 snd_seq_midi,snd_seq_midi_event
pmac_zilog             33361  0 
evdev                  17447  4 
snd_timer              36414  2 snd_pcm,snd_seq
serial_core            36427  1 pmac_zilog
snd_seq_device         11305  3 snd_seq_midi,snd_rawmidi,snd_seq
rtc_generic             3186  0 
uninorth_agp           12951  1 
agpgart                58767  3 ttm,drm,uninorth_agp
snd                   102374  14 snd_aoa_codec_onyx,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_powermac,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               2250  1 snd
windfarm_smu_sat        8512  0 [permanent]
windfarm_smu_sensors     8567  4 
windfarm_smu_controls     7645  3 
usbhid                 62618  0 
windfarm_max6690_sensor     5628  0 
windfarm_pm81          11593  0 
sg                     48479  0 
windfarm_pid            3577  1 windfarm_pm81
hid                   105692  1 usbhid
firewire_ohci          41462  0 
usb_storage            67096  1 
windfarm_lm75_sensor     6083  1 
sd_mod                 54998  5 
firewire_core          83237  1 firewire_ohci
windfarm_cpufreq_clamp     3829  1 
sungem                 54082  0 
crc_t10dif              1795  1 sd_mod
crc_itu_t               1998  1 firewire_core
sungem_phy             19346  1 sungem
windfarm_core          16027  7 windfarm_smu_sat,windfarm_smu_sensors,windfarm_smu_controls,windfarm_pm81,windfarm_max6690_sensor,windfarm_lm75_sensor,windfarm_cpufreq_clamp



il ne marche toujours pas

Hors ligne

#10 Le 07/12/2011, à 02:11

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

sudo modprobe rt2870sta

sinon branche un cable reseau pour installer  linux-backports-modules-compat-wireless-2.6.38-maverick-generic
ou install ubuntu 11.04,rt2870sta est present dans cette version

Dernière modification par chibbata (Le 07/12/2011, à 02:13)

Hors ligne

#11 Le 07/12/2011, à 02:16

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

je pourrais brancher un cable ethernet le week end et faire une mise à niveau vers ubuntu 11.10

Hors ligne

#12 Le 07/12/2011, à 02:24

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

non,mise a jours vers ubuntu 11.04

Hors ligne

#13 Le 07/12/2011, à 02:40

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

d'accord je ferais cette mise à jour ves ubuntu 11.04

Hors ligne

#14 Le 07/12/2011, à 23:38

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

chibbata
comment faire la migration vers ubuntu 11.04 en évitant de passer à ubuntu 11.10?

Hors ligne

#15 Le 08/12/2011, à 00:02

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

tapes la commande

sudo update-manager -d

une petite fenetre s'ouvres qui te propose de mettre a niveau ubuntu

il ne te propose pas 11.04 ?

Hors ligne

#16 Le 12/12/2011, à 23:23

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

je suis entrain de finir la mise à niveau ..
il va le reconnaitre de suite ma clé ???

Dernière modification par thierclap (Le 12/12/2011, à 23:24)

Hors ligne

#17 Le 13/12/2011, à 00:31

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

il a reconnu la clé wifi ralink.
la clé fait clignoté sa led..
j'arrive pas à bien con figurer la conection wifi par contre ..
il me demande à chaque fois la cle wpa que je donne à chaque fois .. mais rien point de vue connection

Hors ligne

#18 Le 13/12/2011, à 00:34

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

post

lsmod | grep rt

Hors ligne

#19 Le 13/12/2011, à 17:45

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

biglover@themachine:~$ lsmod
Module                  Size  Used by
nls_iso8859_1           5753  1 
nls_cp437               7459  1 
vfat                   17804  1 
fat                    84075  1 vfat
arc4                    2532  2 
rt2800usb              17934  0 
rt2800lib              56577  1 rt2800usb
crc_ccitt               1958  1 rt2800lib
rt2x00usb              17445  1 rt2800usb
snd_aoa_codec_onyx     19187  2 
rt2x00lib              64035  3 rt2800usb,rt2800lib,rt2x00usb
snd_aoa_fabric_layout    16898  2 
binfmt_misc            14005  1 
mac80211              436789  3 rt2800lib,rt2x00usb,rt2x00lib
snd_aoa                25499  2 snd_aoa_codec_onyx,snd_aoa_fabric_layout
nouveau               893169  2 
cfg80211              251230  2 rt2x00lib,mac80211
drm_kms_helper         48411  1 nouveau
ttm                   104911  1 nouveau
snd_aoa_i2sbus         30013  1 
drm                   316321  4 nouveau,drm_kms_helper,ttm
rtc_generic             3178  0 
snd_aoa_soundbus        8261  2 snd_aoa_fabric_layout,snd_aoa_i2sbus
snd_powermac           94392  0 
snd_pcm               139160  2 snd_aoa_i2sbus,snd_powermac
snd_page_alloc         11624  1 snd_pcm
snd_seq_midi            9695  0 
snd_rawmidi            36786  1 snd_seq_midi
snd_seq_midi_event     11545  1 snd_seq_midi
snd_seq                93911  2 snd_seq_midi,snd_seq_midi_event
uninorth_agp           12583  1 
snd_timer              36242  2 snd_pcm,snd_seq
snd_seq_device         10971  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    99556  14 snd_aoa_codec_onyx,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_powermac,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               2258  1 snd
usbhid                 59617  0 
sg                     48153  0 
usb_storage            67840  1 
firewire_ohci          51853  0 
hid                   108440  1 usbhid
firewire_core          90464  1 firewire_ohci
uas                    14046  0 
sd_mod                 51864  5 
crc_itu_t               2006  1 firewire_core
sungem                 53824  0 
crc_t10dif              1811  1 sd_mod
windfarm_cpufreq_clamp     3709  1 
windfarm_lm75_sensor     6011  1 
sungem_phy             19266  1 sungem
windfarm_smu_sensors     8335  4 
windfarm_smu_controls     7637  3 
windfarm_pm81          11417  0 
windfarm_core          15918  5 windfarm_cpufreq_clamp,windfarm_lm75_sensor,windfarm_smu_sensors,windfarm_smu_controls,windfarm_pm81
windfarm_pid            3569  1 windfarm_pm81

Hors ligne

#20 Le 13/12/2011, à 18:00

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

plus exactement 



biglover@themachine:~$ lsmod | grep rt
rt2800usb              17934  0 
rt2800lib              56577  1 rt2800usb
crc_ccitt               1958  1 rt2800lib
rt2x00usb              17445  1 rt2800usb
rt2x00lib              64035  3 rt2800usb,rt2800lib,rt2x00usb
mac80211              436789  3 rt2800lib,rt2x00usb,rt2x00lib
cfg80211              251230  2 rt2x00lib,mac80211
rtc_generic             3178  0 
uninorth_agp           12583  1

la clé wifi clignote des fois mais pas de connection .
j'ai pourtant configuré la connection

Dernière modification par thierclap (Le 13/12/2011, à 18:05)

Hors ligne

#21 Le 13/12/2011, à 18:08

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

sudo rmmod -f 2800usb
sudo modprobe rt2870sta

si toujours rien

wget http://wiki.ubuntu-it.org/dwlg122e1?action=AttachFile&do=view&target=D-Link_DWL-G122_E1.tar.gz
tar xvf D-Link_DWL-G122_E1.tar.gz
cd D-Link_DWL-G122_E1
sudo ./dwlg122e1.sh

redemarres le pc

Dernière modification par chibbata (Le 13/12/2011, à 18:14)

Hors ligne

#22 Le 13/12/2011, à 18:23

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

voici ce que çà me donne 

biglover@themachine:~$ sudo rmmod -f 2800usb
ERROR: Removing '2800usb': No such file or directory
biglover@themachine:~$ sudo modprobe rt2870sta
FATAL: Module rt2870sta not found.

je vais faire ce que tu dis ensuite...

Hors ligne

#23 Le 13/12/2011, à 19:23

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

même erreur !!!!!

Hors ligne

#24 Le 13/12/2011, à 19:28

chibbata

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

sudo rmmod -f rt2800usb
sudo modprobe rt2870sta

Dernière modification par chibbata (Le 13/12/2011, à 19:29)

Hors ligne

#25 Le 13/12/2011, à 19:35

thierclap

Re : Installation Pilote Ralink RT2870 pour cle wifi D-Link DWL-G122 Rev E1

biglover@themachine:~$ sudo rmmod -f 2800usb
ERROR: Removing '2800usb': No such file or directory
biglover@themachine:~$ sudo modprobe rt2870sta
FATAL: Module rt2870sta not found.

Hors ligne

Pages : 1 2