Le PC (gnome ?) se fige completement: reset obligatoire.

inbox · Le 21/02/2007, à 20:54

@sebastien14

Il est certain que l'une des deux barrettes à un problème. Il peut arriver que l'une d'elles soit mal enfichée, et donc, le fait de les enlever et les remettre pourrait corriger ton problème (j'ai vu ça une fois !). Mais n'y croyons pas trop.

Tu peux aussi démarrer avec chacune des barretes. Ce sera juste un peu plus lent au démarrage. Afin de tester facilement la capacité mémoire, lance des apllications gourmandes en mémoire, jusqu'à ce que ça "swape".

Je ne pense pas, comme le dit sinux, qu'il soit nécessaire de laisser tourner le programme de test aussi longtemps. 1/2h à 1 heure devrait suffire.

sebastien14 · Le 21/02/2007, à 21:37

ok demain je teste les barette une par une
aujourd'hui j'ai pas eu le temps de tout demonter

ce qui est bizzare c'est que depuis avant hier soir le pc freezze moins 1 fois en deux jours
par contre des fois au demarage il ne bip pas (et donc ne boot pas ):rolleyes:

il faut que je eteigne l'alim et que je la ralumme pour qu'il boot a nouveau

a mon avis il y a plusieurs petit probleme

sinux · Le 21/02/2007, à 23:23

Apparemment l'option noapic à l'air d'empêcher le plantage.
1h30 sans planter!!

sebastien14 · Le 22/02/2007, à 04:30

sinux a écrit :

Apparemment l'option noapic à l'air d'empêcher le plantage.
1h30 sans planter!!

fais le detail s'il te plait le mien a encore planter cette nuit

j'aimerai bien voir ca aussi

mer

sebastien14 · Le 22/02/2007, à 08:29

Kanor a écrit :

Salut
Tu a vraiment pas de chance est ce que tu peut regarder dans les fichier kern.log message qui se trouve en /var/log durant la période de crash (essaye de regarder dans les différent fichier des journaux d'évenement il doit bien avoir une solution )

pour repondre @ konar :

voici mon kern.log en periode de crash comme me l'a demander kanor avant hier
j'ai reussi a le copier avec me connectant en ssh sur mon pc via mon mac

y a t'il une impcompatibilitée entre une carte memoire ddr 233 pc 2100 et une ddr 400 PC 3200 ?

  GNU nano 1.3.12                                      Fichier : /var/log/kern.log                                                                                 

Feb 21 09:52:55 ubuntumce kernel: [17220173.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
Feb 21 09:52:56 ubuntumce kernel: [17220174.124000] Netfilter messages via NETLINK v0.30.
Feb 21 09:52:56 ubuntumce kernel: [17220174.140000] ip_conntrack version 2.4 (4095 buckets, 32760 max) - 224 bytes per conntrack
Feb 21 09:52:58 ubuntumce kernel: [17220176.416000] nfsd: last server has exited
Feb 21 09:52:58 ubuntumce kernel: [17220176.416000] nfsd: unexporting all filesystems
Feb 21 09:52:58 ubuntumce kernel: [17220176.416000] RPC: failed to contact portmap (errno -5).
Feb 21 18:38:48 ubuntumce kernel: Inspecting /boot/System.map-2.6.17-11-generic
Feb 21 18:38:48 ubuntumce kernel: Loaded 22866 symbols from /boot/System.map-2.6.17-11-generic.
Feb 21 18:38:48 ubuntumce kernel: Symbols match kernel version 2.6.17.
Feb 21 18:38:48 ubuntumce kernel: No module symbols loaded - kernel modules not enabled.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubun$
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] BIOS-provided physical RAM map:
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] 0MB HIGHMEM available.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] 511MB LOWMEM available.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] found SMP MP-table at 000f52d0
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] On node 0 totalpages: 131056
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000]   Normal zone: 126960 pages, LIFO batch:31
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] DMI 2.2 present.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: RSDP (v000 VIA694                                ) @ 0x000f6df0
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6dc0
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: PM-Timer IO Port: 0x4008
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: Local APIC address 0xfee00000
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Processor #0 6:8 APIC version 16
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: IRQ0 used by override.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: IRQ2 used by override.

Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: IRQ0 used by override.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: IRQ2 used by override.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] ACPI: IRQ9 used by override.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Using ACPI (MADT) for SMP configuration information
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Built 1 zonelists
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] mapped APIC to ffffd000 (fee00000)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Enabling fast FPU save and restore... done.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Enabling unmasked SIMD FPU exception support... done.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Initializing CPU#0
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Detected 2128.321 MHz processor.
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Using pmtmr for high-res timesource
Feb 21 18:38:48 ubuntumce kernel: [17179569.184000] Console: colour VGA+ 80x25
Feb 21 18:38:48 ubuntumce kernel: [17179571.252000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 21 18:38:48 ubuntumce kernel: [17179571.252000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 21 18:38:48 ubuntumce kernel: [17179571.268000] Memory: 510048k/524224k available (1911k kernel code, 13612k reserved, 1073k data, 308k init, 0k highmem)
Feb 21 18:38:48 ubuntumce kernel: [17179571.268000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] Calibrating delay using timer specific routine.. 4260.52 BogoMIPS (lpj=8521059)
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] Security Framework v1.0.0 initialized
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] SELinux:  Disabled at boot. 
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] Mount-cache hash table entries: 512 
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] CPU: L2 Cache: 256K (64 bytes/line)
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Feb 21 18:38:48 ubuntumce kernel: [17179571.348000] Checking 'hlt' instruction... OK.
Feb 21 18:38:48 ubuntumce kernel: [17179571.364000] SMP alternatives: switching to UP code
Feb 21 18:38:48 ubuntumce kernel: [17179571.364000] Freeing SMP alternatives: 16k freed
Feb 21 18:38:48 ubuntumce kernel: [17179571.364000] checking if image is initramfs... it is
Feb 21 18:38:48 ubuntumce kernel: [17179571.804000] Freeing initrd memory: 5327k freed
Feb 21 18:38:48 ubuntumce kernel: [17179571.804000] ACPI: Core revision 20060707
Feb 21 18:38:48 ubuntumce kernel: [17179571.812000] ACPI: Looking for DSDT ... not found!
Feb 21 18:38:48 ubuntumce kernel: [17179571.816000] CPU0: AMD Athlon(tm) XP 2600+ stepping 01
Feb 21 18:38:48 ubuntumce kernel: [17179571.816000] Total of 1 processors activated (4260.52 BogoMIPS).
Feb 21 18:38:48 ubuntumce kernel: [17179571.816000] ENABLING IO-APIC IRQs
Feb 21 18:38:48 ubuntumce kernel: [17179571.816000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 21 18:38:48 ubuntumce kernel: [17179571.816000] ENABLING IO-APIC IRQs
Feb 21 18:38:48 ubuntumce kernel: [17179571.816000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 21 18:38:48 ubuntumce kernel: [17179571.960000] Brought up 1 CPUs
Feb 21 18:38:48 ubuntumce kernel: [17179571.960000] migration_cost=0
Feb 21 18:38:48 ubuntumce kernel: [17179571.960000] NET: Registered protocol family 16
Feb 21 18:38:48 ubuntumce kernel: [17179571.960000] EISA bus registered
Feb 21 18:38:48 ubuntumce kernel: [17179571.960000] ACPI: bus type pci registered
Feb 21 18:38:48 ubuntumce kernel: [17179571.964000] PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=1
Feb 21 18:38:48 ubuntumce kernel: [17179571.964000] PCI: Using configuration type 1   
Feb 21 18:38:48 ubuntumce kernel: [17179571.964000] Setting up standard PCI resources   
Feb 21 18:38:48 ubuntumce kernel: [17179571.980000] ACPI: Interpreter enabled
Feb 21 18:38:48 ubuntumce kernel: [17179571.980000] ACPI: Using IOAPIC for interrupt routing
Feb 21 18:38:48 ubuntumce kernel: [17179571.980000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 21 18:38:48 ubuntumce kernel: [17179571.980000] PCI: Probing PCI hardware (bus 00)
Feb 21 18:38:48 ubuntumce kernel: [17179571.980000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Feb 21 18:38:48 ubuntumce kernel: [17179571.984000] PCI quirk: region 4000-407f claimed by vt8235 PM
Feb 21 18:38:48 ubuntumce kernel: [17179571.984000] PCI quirk: region 5000-500f claimed by vt8235 SMB
Feb 21 18:38:48 ubuntumce kernel: [17179571.984000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:11.1
Feb 21 18:38:48 ubuntumce kernel: [17179571.984000] Boot video device is 0000:01:00.0
Feb 21 18:38:48 ubuntumce kernel: [17179571.984000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 21 18:38:48 ubuntumce kernel: [17179572.004000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 21 18:38:48 ubuntumce kernel: [17179572.004000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. 
Feb 21 18:38:48 ubuntumce kernel: [17179572.012000] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 21 18:38:48 ubuntumce kernel: [17179572.012000] pnp: PnP ACPI init
Feb 21 18:38:48 ubuntumce kernel: [17179572.016000] pnp: PnP ACPI: found 14 devices
Feb 21 18:38:48 ubuntumce kernel: [17179572.016000] PnPBIOS: Disabled by ACPI PNP
Feb 21 18:38:48 ubuntumce kernel: [17179572.016000] PCI: Using ACPI for IRQ routing
Feb 21 18:38:48 ubuntumce kernel: [17179572.016000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000] PCI: Bridge: 0000:00:01.0
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000]   IO window: disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000]   MEM window: e4000000-e5ffffff
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000]   PREFETCH window: d0000000-dfffffff 
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000] PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000] NET: Registered protocol family 2
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

Feb 21 18:38:48 ubuntumce kernel: [17179571.984000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 21 18:38:48 ubuntumce kernel: [17179572.004000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 21 18:38:48 ubuntumce kernel: [17179572.004000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.008000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.012000] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 21 18:38:48 ubuntumce kernel: [17179572.012000] pnp: PnP ACPI init
Feb 21 18:38:48 ubuntumce kernel: [17179572.016000] pnp: PnP ACPI: found 14 devices
Feb 21 18:38:48 ubuntumce kernel: [17179572.016000] PnPBIOS: Disabled by ACPI PNP
Feb 21 18:38:48 ubuntumce kernel: [17179572.016000] PCI: Using ACPI for IRQ routing
Feb 21 18:38:48 ubuntumce kernel: [17179572.016000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000] PCI: Bridge: 0000:00:01.0
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000]   IO window: disabled.
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000]   MEM window: e4000000-e5ffffff
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000]   PREFETCH window: d0000000-dfffffff
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000] PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 21 18:38:48 ubuntumce kernel: [17179572.040000] NET: Registered protocol family 2
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] TCP: Hash tables configured (established 16384 bind 8192)
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] TCP reno registered
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] audit: initializing netlink socket (disabled)
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] audit(1172083101.080:1): initialized
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] VFS: Disk quotas dquot_6.5.1
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] Initializing Cryptographic API   
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] io scheduler noop registered
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] io scheduler anticipatory registered
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] io scheduler deadline registered
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] io scheduler cfq registered (default)
Feb 21 18:38:48 ubuntumce kernel: [17179572.080000] isapnp: Scanning for PnP cards...
Feb 21 18:38:48 ubuntumce kernel: [17179572.436000] isapnp: No Plug & Play device found
Feb 21 18:38:48 ubuntumce kernel: [17179572.456000] Real Time Clock Driver v1.12ac
Feb 21 18:38:48 ubuntumce kernel: [17179572.456000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 21 18:38:48 ubuntumce kernel: [17179572.456000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 21 18:38:48 ubuntumce kernel: [17179572.456000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 21 18:38:48 ubuntumce kernel: [17179572.456000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] mice: PS/2 mouse device common for all mice
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] PNP: PS/2 controller doesn't have AUX irq; using default 12
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] EISA: Probing bus 0 at eisa.0  
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] Cannot allocate resource for EISA slot 4
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] Cannot allocate resource for EISA slot 5
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] EISA: Detected 0 cards.
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] TCP bic registered
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] NET: Registered protocol family 1
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] NET: Registered protocol family 8
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] NET: Registered protocol family 20  
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] Using IPI No-Shortcut mode
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] ACPI: (supports S0 S1 S4 S5)
Feb 21 18:38:48 ubuntumce kernel: [17179572.460000] Freeing unused kernel memory: 308k freed
Feb 21 18:38:48 ubuntumce kernel: [17179572.516000] input: AT Translated Set 2 keyboard as /class/input/input0
Feb 21 18:38:48 ubuntumce kernel: [17179573.596000] Capability LSM initialized
Feb 21 18:38:48 ubuntumce kernel: [17179573.632000] ACPI: Fan [FAN] (on)
Feb 21 18:38:48 ubuntumce kernel: [17179573.636000] ACPI: CPU0 (power states: C1[C1] C2[C2])
Feb 21 18:38:48 ubuntumce kernel: [17179573.636000] ACPI: Processor [CPU0] (supports 2 throttling states)
Feb 21 18:38:48 ubuntumce kernel: [17179573.636000] ACPI: Thermal Zone [THRM] (40 C)
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 9
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] VP_IDE: chipset revision 6
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] VP_IDE: not 100%% native mode: will probe irqs later
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000]     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000]     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
Feb 21 18:38:48 ubuntumce kernel: [17179574.176000] Probing IDE interface ide0...
Feb 21 18:38:48 ubuntumce kernel: [17179574.620000] hda: ST380022A, ATA DISK drive
Feb 21 18:38:48 ubuntumce kernel: [17179575.332000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 21 18:38:48 ubuntumce kernel: [17179575.336000] Probing IDE interface ide1...

Feb 21 18:38:48 ubuntumce kernel: [17179575.332000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 21 18:38:48 ubuntumce kernel: [17179575.336000] Probing IDE interface ide1...
Feb 21 18:38:48 ubuntumce kernel: [17179576.252000] hdc: DVD-ROM BDV316C, ATAPI CD/DVD-ROM drive   
Feb 21 18:38:48 ubuntumce kernel: [17179577.092000] hdd: Hewlett-Packard DVD Writer 200, ATAPI CD/DVD-ROM drive
Feb 21 18:38:48 ubuntumce kernel: [17179577.152000] ide1 at 0x170-0x177,0x376 on irq 15
Feb 21 18:38:48 ubuntumce kernel: [17179577.160000] hda: max request size: 128KiB
Feb 21 18:38:48 ubuntumce kernel: [17179577.172000] hda: 156301488 sectors (80026 MB) w/1024KiB Cache, CHS=65535/16/63, UDMA(100)
Feb 21 18:38:48 ubuntumce kernel: [17179577.172000] hda: cache flushes supported
Feb 21 18:38:48 ubuntumce kernel: [17179577.176000]  hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
Feb 21 18:38:48 ubuntumce kernel: [17179577.236000] hdc: ATAPI 1X DVD-ROM drive, 512kB Cache, UDMA(33)
Feb 21 18:38:48 ubuntumce kernel: [17179577.236000] Uniform CD-ROM driver Revision: 3.20
Feb 21 18:38:48 ubuntumce kernel: [17179577.252000] hdd: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Feb 21 18:38:48 ubuntumce kernel: [17179577.684000] usbcore: registered new driver usbfs
Feb 21 18:38:48 ubuntumce kernel: [17179577.684000] usbcore: registered new driver hub
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] USB Universal Host Controller Interface driver v3.0
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] uhci_hcd 0000:00:10.0: UHCI Host Controller
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000d400
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] usb usb1: configuration #1 chosen from 1 choice
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] hub 1-0:1.0: USB hub found
Feb 21 18:38:48 ubuntumce kernel: [17179577.688000] hub 1-0:1.0: 2 ports detected
Feb 21 18:38:48 ubuntumce kernel: [17179577.796000] ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 21 18:38:48 ubuntumce kernel: [17179577.796000] PCI: Via IRQ fixup for 0000:00:10.1, from 12 to 1
Feb 21 18:38:48 ubuntumce kernel: [17179577.796000] uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 21 18:38:48 ubuntumce kernel: [17179577.796000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Feb 21 18:38:48 ubuntumce kernel: [17179577.796000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d800
Feb 21 18:38:48 ubuntumce kernel: [17179577.796000] usb usb2: configuration #1 chosen from 1 choice  
Feb 21 18:38:48 ubuntumce kernel: [17179577.796000] hub 2-0:1.0: USB hub found
Feb 21 18:38:48 ubuntumce kernel: [17179577.796000] hub 2-0:1.0: 2 ports detected
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 1
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] uhci_hcd 0000:00:10.2: UHCI Host Controller
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000dc00
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] usb usb3: configuration #1 chosen from 1 choice
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] hub 3-0:1.0: USB hub found
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] hub 3-0:1.0: 2 ports detected
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 21 18:38:48 ubuntumce kernel: [17179577.904000] hub 3-0:1.0: 2 ports detected
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] ehci_hcd 0000:00:10.3: EHCI Host Controller
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] ehci_hcd 0000:00:10.3: irq 177, io mem 0xe6012000
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] usb usb4: configuration #1 chosen from 1 choice
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] hub 4-0:1.0: USB hub found
Feb 21 18:38:48 ubuntumce kernel: [17179578.012000] hub 4-0:1.0: 6 ports detected
Feb 21 18:38:48 ubuntumce kernel: [17179578.172000] Attempting manual resume
Feb 21 18:38:48 ubuntumce kernel: [17179578.224000] kjournald starting.  Commit interval 5 seconds
Feb 21 18:38:48 ubuntumce kernel: [17179578.224000] EXT3-fs: mounted filesystem with ordered data mode.
Feb 21 18:38:48 ubuntumce kernel: [17179579.308000] usb 1-2: new low speed USB device using uhci_hcd and address 2
Feb 21 18:38:48 ubuntumce kernel: [17179579.472000] usb 1-2: configuration #1 chosen from 1 choice
Feb 21 18:38:48 ubuntumce kernel: [17179589.640000] irda_init()
Feb 21 18:38:48 ubuntumce kernel: [17179589.640000] NET: Registered protocol family 23
Feb 21 18:38:48 ubuntumce kernel: [17179590.032000] input: PC Speaker as /class/input/input1
Feb 21 18:38:48 ubuntumce kernel: [17179590.156000] parport: PnPBIOS parport detected.
Feb 21 18:38:48 ubuntumce kernel: [17179590.156000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Feb 21 18:38:48 ubuntumce kernel: [17179590.312000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 21 18:38:48 ubuntumce kernel: [17179590.340000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 21 18:38:48 ubuntumce kernel: [17179590.372000] Linux video capture interface: v1.00
Feb 21 18:38:48 ubuntumce kernel: [17179590.420000] Linux agpgart interface v0.101 (c) Dave Jones
Feb 21 18:38:48 ubuntumce kernel: [17179590.424000] agpgart: Detected VIA KT266/KY266x/KT333 chipset
Feb 21 18:38:48 ubuntumce kernel: [17179590.428000] agpgart: AGP aperture is 64M @ 0xe0000000
Feb 21 18:38:48 ubuntumce kernel: [17179590.460000] Floppy drive(s): fd0 is 1.44M
Feb 21 18:38:48 ubuntumce kernel: [17179590.476000] FDC 0 is a post-1991 82077
Feb 21 18:38:48 ubuntumce kernel: [17179590.688000] 8139too Fast Ethernet driver 0.9.27
Feb 21 18:38:48 ubuntumce kernel: [17179590.688000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 185
Feb 21 18:38:48 ubuntumce kernel: [17179590.688000] eth0: RealTek RTL8139 at 0xe085c000, 00:e0:4c:d0:19:a5, IRQ 185
Feb 21 18:38:48 ubuntumce kernel: [17179590.688000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Feb 21 18:38:48 ubuntumce kernel: [17179590.704000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Feb 21 18:38:48 ubuntumce kernel: [17179590.896000] usbcore: registered new driver hiddev
Feb 21 18:38:48 ubuntumce kernel: [17179590.912000] input: USB Mouse as /class/input/input2
Feb 21 18:38:48 ubuntumce kernel: [17179590.912000] input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:10.0-2
Feb 21 18:38:48 ubuntumce kernel: [17179590.912000] usbcore: registered new driver usbhid
Feb 21 18:38:48 ubuntumce kernel: [17179590.912000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Feb 21 18:38:48 ubuntumce kernel: [17179590.924000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
Feb 21 18:38:48 ubuntumce kernel: [17179591.096000] saa7130/34: v4l2 driver version 0.2.14 loaded
Feb 21 18:38:48 ubuntumce kernel: [17179591.096000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 193
Feb 21 18:38:48 ubuntumce kernel: [17179591.096000] saa7133[0]: found at 0000:00:0b.0, rev: 240, irq: 193, latency: 32, mmio: 0xe6011000
Feb 21 18:38:48 ubuntumce kernel: [17179591.096000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 193
Feb 21 18:38:48 ubuntumce kernel: [17179591.096000] saa7133[0]: found at 0000:00:0b.0, rev: 240, irq: 193, latency: 32, mmio: 0xe6011000
Feb 21 18:38:48 ubuntumce kernel: [17179591.096000] saa7133[0]: subsystem: 12ab:0800, board: UPMOST PURPLE TV [card=36,autodetected]
Feb 21 18:38:48 ubuntumce kernel: [17179591.096000] saa7133[0]: board init: gpio is 0
Feb 21 18:38:48 ubuntumce kernel: [17179591.188000] NET: Registered protocol family 10
Feb 21 18:38:48 ubuntumce kernel: [17179591.188000] lo: Disabled Privacy Extensions
Feb 21 18:38:48 ubuntumce kernel: [17179591.188000] IPv6 over IPv4 tunneling driver
Feb 21 18:38:48 ubuntumce kernel: [17179591.228000] input: Purple TV as /class/input/input3
Feb 21 18:38:48 ubuntumce kernel: [17179591.228000] ir-kbd-i2c: Purple TV detected at i2c-1/1-007a/ir0 [saa7133[0]]
Feb 21 18:38:48 ubuntumce kernel: [17179591.272000] nvidia: module license 'NVIDIA' taints kernel.
Feb 21 18:38:48 ubuntumce kernel: [17179591.280000] saa7133[0]: i2c eeprom 00: ab 12 00 08 00 00 00 00 00 00 00 00 00 00 00 00
Feb 21 18:38:48 ubuntumce kernel: [17179591.280000] saa7133[0]: i2c eeprom 10: ff ff ff ff 15 00 05 01 13 c2 db ff ff ff ff ff
Feb 21 18:38:48 ubuntumce kernel: [17179591.280000] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 21 18:38:48 ubuntumce kernel: [17179591.280000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 21 18:38:48 ubuntumce kernel: [17179591.280000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 21 18:38:48 ubuntumce kernel: [17179591.280000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 21 18:38:48 ubuntumce kernel: [17179591.280000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 21 18:38:48 ubuntumce kernel: [17179591.280000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Feb 21 18:38:48 ubuntumce kernel: [17179591.304000] ts: Compaq touchscreen protocol output
Feb 21 18:38:48 ubuntumce kernel: [17179591.400000] tuner 1-004b: chip found @ 0x96 (saa7133[0])
Feb 21 18:38:48 ubuntumce kernel: [17179591.400000] tuner 1-004b: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
Feb 21 18:38:48 ubuntumce kernel: [17179591.420000] saa7133[0]: registered device video0 [v4l2]
Feb 21 18:38:48 ubuntumce kernel: [17179591.420000] saa7133[0]: registered device vbi0
Feb 21 18:38:48 ubuntumce kernel: [17179591.432000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
Feb 21 18:38:48 ubuntumce kernel: [17179591.432000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Feb 21 18:38:48 ubuntumce kernel: [17179591.432000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201
Feb 21 18:38:48 ubuntumce kernel: [17179591.432000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
Feb 21 18:38:48 ubuntumce kernel: [17179591.432000] PCI: Setting latency timer of device 0000:00:11.5 to 64
Feb 21 18:38:48 ubuntumce kernel: [17179591.436000] saa7134 ALSA driver for DMA sound loaded
Feb 21 18:38:48 ubuntumce kernel: [17179591.436000] saa7133[0]/alsa: saa7133[0] at 0xe6011000 irq 193 registered as card -1
Feb 21 18:38:48 ubuntumce kernel: [17179591.960000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
Feb 21 18:38:48 ubuntumce kernel: [17179591.960000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8776  Mon Oct 16 21:56:04 PDT 2006
Feb 21 18:38:48 ubuntumce kernel: [17179592.468000] lp0: using parport0 (interrupt-driven).
Feb 21 18:38:48 ubuntumce kernel: [17179592.508000] Adding 1124508k swap on /dev/disk/by-uuid/9ebe1dbf-26de-4ccf-87f9-669cfb7d67e4.  Priority:-1 extents:1 across:$
Feb 21 18:38:48 ubuntumce kernel: [17179592.752000] EXT3 FS on hda2, internal journal
Feb 21 18:38:48 ubuntumce kernel: [17179594.896000] kjournald starting.  Commit interval 5 seconds
Feb 21 18:38:48 ubuntumce kernel: [17179594.908000] EXT3 FS on hda5, internal journal
Feb 21 18:38:48 ubuntumce kernel: [17179594.908000] EXT3-fs: mounted filesystem with ordered data mode.   
Feb 21 18:38:48 ubuntumce kernel: [17179594.928000] NTFS driver 2.1.27 [Flags: R/O MODULE].
Feb 21 18:38:48 ubuntumce kernel: [17179594.980000] NTFS volume version 3.1.
Feb 21 18:38:48 ubuntumce kernel: [17179596.412000] NET: Registered protocol family 17
Feb 21 18:38:48 ubuntumce kernel: [17179600.736000] ACPI: Power Button (FF) [PWRF]

Feb 21 18:38:48 ubuntumce kernel: [17179596.412000] NET: Registered protocol family 17
Feb 21 18:38:48 ubuntumce kernel: [17179600.736000] ACPI: Power Button (FF) [PWRF]
Feb 21 18:38:48 ubuntumce kernel: [17179600.736000] ACPI: Power Button (CM) [PWRB]
Feb 21 18:38:48 ubuntumce kernel: [17179600.736000] ACPI: Sleep Button (CM) [SLPB]   
Feb 21 18:38:48 ubuntumce kernel: [17179600.860000] ibm_acpi: ec object not found
Feb 21 18:38:48 ubuntumce kernel: [17179600.900000] pcc_acpi: loading...
Feb 21 18:38:48 ubuntumce kernel: [17179601.276000] eth1: no IPv6 routers present  
Feb 21 18:38:50 ubuntumce kernel: [17179603.880000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Feb 21 18:38:50 ubuntumce kernel: [17179603.880000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Feb 21 18:38:50 ubuntumce kernel: [17179603.880000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Feb 21 18:38:51 ubuntumce kernel: [17179604.660000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Feb 21 18:38:51 ubuntumce kernel: [17179604.660000] apm: overridden by ACPI.
Feb 21 18:38:55 ubuntumce kernel: [17179608.856000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Feb 21 18:38:55 ubuntumce kernel: [17179608.960000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory 
Feb 21 18:38:55 ubuntumce kernel: [17179608.972000] NFSD: starting 90-second grace period
Feb 21 18:38:57 ubuntumce kernel: [17179610.416000] Bluetooth: Core ver 2.8
Feb 21 18:38:57 ubuntumce kernel: [17179610.416000] NET: Registered protocol family 31
Feb 21 18:38:57 ubuntumce kernel: [17179610.416000] Bluetooth: HCI device and connection manager initialized
Feb 21 18:38:57 ubuntumce kernel: [17179610.416000] Bluetooth: HCI socket layer initialized
Feb 21 18:38:57 ubuntumce kernel: [17179610.452000] Bluetooth: L2CAP ver 2.8
Feb 21 18:38:57 ubuntumce kernel: [17179610.452000] Bluetooth: L2CAP socket layer initialized
Feb 21 18:38:57 ubuntumce kernel: [17179610.456000] Bluetooth: RFCOMM socket layer initialized 
Feb 21 18:38:57 ubuntumce kernel: [17179610.456000] Bluetooth: RFCOMM TTY layer initialized
Feb 21 18:38:57 ubuntumce kernel: [17179610.456000] Bluetooth: RFCOMM ver 1.7

avec l'espoir que l'on trouvera quelque chose

Dernière modification par sebastien14 (Le 22/02/2007, à 09:48)

inbox · Le 22/02/2007, à 14:43

y a t'il une impcompatibilitée entre une carte memoire ddr 233 pc 2100 et une ddr 400 PC 3200 ?

Il y a un risque d'instabilité. Normallement on ne mélange pas les types de mémoire !!!

sebastien14 · Le 22/02/2007, à 15:37

@ inbox

merci pour ta reponce est ce que mon kern.log a pu t'aider ?
c'est du chinois pour moi

bye

sinux · Le 22/02/2007, à 16:54

Je ne vois rien de très inquiétant sur ton kern.log mais je suis pas expert.
A première vue y a juste une remarque :ibm_acpi: ec object not found
Mais je sais pas ce que cela veux dire.

Ce que j'ai fait c'est rajouter l'option "noapic nolapic" à la fin de la ligne concernant le kernel que je boot dans /boot/grub/menu.lst

Ex :
title Ubuntu, kernel 2.6.17-11-generic
root (hd0,1)
kernel /boot/vmlinuz-2.6.17-11-generic root=/dev/hda2 ro quiet splash noapic nolapic
initrd /boot/initrd.img-2.6.17-11-generic
quiet

Maintenant j'ai pas encore pu tester longtemps donc c'est peut-être pas ça.

Est-ce que qqn pour expliquer à quoi servent ces options car j'ai juste trouvé que c'était pour dépanner un problème !?!

sebastien14 · Le 22/02/2007, à 19:04

voila ce que j'ai en editant la partie dont tu parle sur
/boot/grub/menu.lst

title           Ubuntu, kernel 2.6.17-11-generic
root            (hd0,1)
kernel          /boot/vmlinuz-2.6.17-11-generic root=/dev/hda2 ro quiet splash
initrd          /boot/initrd.img-2.6.17-11-generic
quiet
initrd          /boot/initrd.img-2.6.17-11-generic
quiet
savedefault
boot

title           Ubuntu, kernel 2.6.17-11-generic (recovery mode)
root            (hd0,1)
kernel          /boot/vmlinuz-2.6.17-11-generic root=/dev/hda2 ro single
initrd          /boot/initrd.img-2.6.17-11-generic
boot

title           Ubuntu, kernel 2.6.17-10-generic
root            (hd0,1)
kernel          /boot/vmlinuz-2.6.17-10-generic root=/dev/hda2 ro quiet splash
initrd          /boot/initrd.img-2.6.17-10-generic
quiet
savedefault
boot
boot

title           Ubuntu, kernel 2.6.17-10-generic (recovery mode)
root            (hd0,1)
kernel          /boot/vmlinuz-2.6.17-10-generic root=/dev/hda2 ro single
initrd          /boot/initrd.img-2.6.17-10-generic
boot

title           Ubuntu, memtest86+
root            (hd0,1)
kernel          /boot/memtest86+.bin
quiet
boot

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title           Other operating systems:
# ones.
title           Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title           Windows XP Media Center Edition
root            (hd0,0)
savedefault
makeactive
chainloader     +1

ou doit je modifié cette option ?

la je suis a six heures uptime sans plantage

seule option modifié est : le BusID ds le xorg

Dernière modification par sebastien14 (Le 22/02/2007, à 19:10)

sinux · Le 22/02/2007, à 19:56

C'est la troisième ligne ou il est inscrit :
kernel /boot/vmlinuz-2.6.17-11-generic root=/dev/hda2 ro quiet splash

Tu dois rajouter :
noapic nolapic

à la fin de la ligne et cela te donne :

kernel /boot/vmlinuz-2.6.17-11-generic root=/dev/hda2 ro quiet splash noapic nolapic

Mais tant que cela ne plante pas fait pas le changement. Comme ça on peut voir d'où vient le problème.

Est-ce que tu à enlever une des deux barrettes ?
Je pense aussi comme inbox que d'avoir deux types de mémoire est déconseillé.

Quand tu aura enlevé une des deux barrettes refait le test pour savoir si elle est défectueuse.

sebastien14 · Le 22/02/2007, à 20:40

slt sinux

pour les barettes j'ai les deux meme barettes pas d'inquietude
j'ai posé la question comme ca pour info :d

j'ai fait le test barette par barettes 1 heures 30 pour chacunes
et je n'ai pas eu d'erreur contraireemnt a la veille ou il y en avait eu

j'attend de voir s'il plante encore et si ca freeze je fais le test noapic
est ce que le tient freeze encore ?

bye

Skippy le Grand Gourou · Le 22/02/2007, à 20:41

J'ai pas lu tout le sujet (juste le titre et survolé la dernière page) mais ça pourrait être un problème de gestion de la température (j'ai eu la même chose il n'y a pas longtemps, et c'est géré par l'acpi).

1) Est-ce que tu as le driver correct pour ta carte graphique ? Si non, c'est le cpu qui prend en charge l'écran de veille, et ça chauffe vite...
2) Que donne en console :

cat /proc/acpi/thermal_zone/THRM/*

3) Est-ce que ça arrive lorsque tu lances un processus gourmand en cpu ?

sebastien14 · Le 22/02/2007, à 20:55

@Skippy le Grand Gourou

pour resuner nous avons un probleme de freeze de gnome entre 1 a 10 heure de fonctionnement

1) Est-ce que tu as le driver correct pour ta carte graphique ?

oui normalement utiliser le tuto officiel qui est le le site:
http://doc.ubuntu-fr.org/nvidia

2) Que donne en console :

cat /proc/acpi/thermal_zone/THRM/*

cela donne ca :

sebastien@ubuntumce:~$ cat /proc/acpi/thermal_zone/THRM/*
cooling mode:   active
<polling disabled>
state:                   ok
temperature:             38 C
critical (S5):           70 C
passive:                 68 C: tc1=4 tc2=3 tsp=60 devices=0xdffdd338 
active[0]:               68 C: devices=0xdffdde00 
sebastien@ubuntumce:~$

3) Est-ce que ça arrive lorsque tu lances un processus gourmand en cpu ?

nan ca peut freezer alors que je ne travaille pas dessus

voici les programme qui tourne quand je ne travaille pas :

sebastien@ubuntumce:~$ top

top - 20:51:46 up 3 min,  2 users,  load average: 0.39, 0.57, 0.26
Tasks: 100 total,   1 running,  99 sleeping,   0 stopped,   0 zombie
Cpu(s):  0.0%us,  2.0%sy,  0.0%ni, 93.4%id,  0.0%wa,  0.0%hi,  4.7%si,  0.0%st
Mem:    515880k total,   306052k used,   209828k free,     8600k buffers
Swap:  1124508k total,        0k used,  1124508k free,   191320k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND            
 4718 sebastie  15   0 32040 7264 5476 S  0.7  1.4   0:00.32 gnome-power-man    
    4 root      RT   0     0    0    0 S  0.3  0.0   0:00.26 watchdog/0         
 4680 sebastie  15   0 43804  16m  12m S  0.3  3.4   0:01.08 gnome-panel        
 4686 sebastie  15   0 18788 5468 4256 S  0.3  1.1   0:00.05 gnome-volume-ma    
 4694 sebastie  15   0 33364  11m 8520 S  0.3  2.2   0:00.36 update-notifier    
 4729 sebastie  16   0  2504  940  796 S  0.3  0.2   0:00.04 mapping-daemon     
 4750 sebastie  15   0 35336  11m 8876 S  0.3  2.4   0:01.30 mixer_applet2      
 4807 sebastie  16   0  2244 1120  844 R  0.3  0.2   0:00.14 top                
    1 root      16   0  1632  540  448 S  0.0  0.1   0:00.95 init               
    2 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0        
    3 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/0        
    5 root      10  -5     0    0    0 S  0.0  0.0   0:00.03 events/0           
    6 root      11  -5     0    0    0 S  0.0  0.0   0:00.01 khelper            
    7 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 kthread            
    9 root      10  -5     0    0    0 S  0.0  0.0   0:00.03 kblockd/0          
   10 root      20  -5     0    0    0 S  0.0  0.0   0:00.00 kacpid             
   11 root      20  -5     0    0    0 S  0.0  0.0   0:00.00 kacpi_notify

merci de te joindre a ce post

bye

Dernière modification par sebastien14 (Le 22/02/2007, à 20:56)

sebastien14 · Le 22/02/2007, à 21:13

plop

j'ai peut etre de nouvelle info a vous de voir
je sui aller ds le visionneur des journaux systemes et la j'ai vu qu'il y avait une partie erruer log

voici une copie d'ecran sur ce lien
avec les erreurs de la journée

dite moi ce que vous en penser :d

merci

[img]http://www.tes-images.com/mini/1172175021_mini_Image 1.png[/img]

sinux · Le 22/02/2007, à 21:42

non je crois pas que ça aie un rapport.

Comme le dit Skippy le Grand Gourou j'avais aussi l'impression que cela venait de la température. Comme si il y avait une température limite qui une fois dépassée bloque le processeur pour ne pas l'endommager. (critical (S5): 70 C) ? Je tourne sur un portable avec un p4 3,06 ghz qui chauffe bcp! Donc peut-être que cela vient de la. Tu as quel proc sebastien14 ?

Chez moi la commande cat /proc/acpi/thermal_zone/THRM/*

ne donne rien car j'ai désactivé l'acpi avec l'option du kernel noacpi.

Tjs pas planté uptime 1:57 load average: 0.35, 0.57, 0.53 (utilisation faible).

Si j'ai pas de plantage ce soir, demain j'enlève l'option noacpi et je fais chauffer mon proc pour voir si c'est ça.

EDIT :
CHez moi la commande est : cat /proc/acpi/thermal_zone/THM0/*
elle donne :
<setting not supported>
cooling mode: critical
<polling disabled>
state: ok
temperature: 50 C
critical (S5): 85 C

Dernière modification par sinux (Le 22/02/2007, à 22:16)

Skippy le Grand Gourou · Le 22/02/2007, à 21:44

sebastien14 a écrit :

1) Est-ce que tu as le driver correct pour ta carte graphique ?
oui normalement utiliser le tuto officiel qui est le le site:
http://doc.ubuntu-fr.org/nvidia

Ah, dommage... Dommage parce que le coup de cpu qui morfle à la place du gpu expliquerai aussi le point 3, à savoir le plantage quand tu n'es pas sur le PC, qui aurait lieu pendant l'écran de veille... Le point 2 va moyennement (un peu oui et un peu non en fait... ) dans le sens de mon idée, mais essaie à tout hasard :

echo 2 > /proc/acpi/thermal_zone/THRM/polling

(le PC vérifiera plus souvent la température, et n'attendra pas qu'il soit trop tard, comme c'était le cas chez moi). Si tu as besoin de redémarrer ton PC pour autre chose qu'un freeze, refais-la au démarrage (en fait refais-la à chaque démarrage jusqu'à ce que ça freeze encore : si ça freeze, c'est que ça change rien donc tant pis...).

Et que donne fglrxinfo en console ?

Pour ton log, rien à craindre : c'est juste que cups (le gestionnaire d'impression) ne trouve pas le dossier machin, donc il le crée.

sinux · Le 22/02/2007, à 22:01

A tout hasard :
Est-ce que Acpi gère la vitesse de rotation du cpufan ?
Si oui le fait-il en fonction de la charge sur le proc ou en fonction de la température effective du proc?

sinux · Le 22/02/2007, à 22:04

fglrxinfo ne donne rien chez moi par contre glxinfo existe :

name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
server glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig, 
    GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control, 
    GLX_EXT_texture_from_pixmap, GLX_ARB_multisample, GLX_NV_float_buffer
client glx vendor string: NVIDIA Corporation
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info, 
    GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync, 
    GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGI_swap_control, GLX_NV_float_buffer, GLX_ARB_fbconfig_float, 
    GLX_EXT_fbconfig_packed_float, GLX_EXT_texture_from_pixmap, 
    GLX_EXT_framebuffer_sRGB
GLX version: 1.3
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig, 
    GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control, 
    GLX_EXT_texture_from_pixmap, GLX_ARB_multisample, GLX_NV_float_buffer, 
    GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce FX Go53xx/AGP/SSE2
OpenGL version string: 2.1.0 NVIDIA 97.46
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_fragment_program, 
    GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader, 
    GL_ARB_half_float_pixel, GL_ARB_imaging, GL_ARB_multisample, 
    GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_pixel_buffer_object, 
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow, 
    GL_ARB_shader_objects, GL_ARB_shading_language_100, 
    GL_ARB_texture_border_clamp, GL_ARB_texture_compression, 
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add, 
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3, 
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle, 
    GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object, 
    GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos, 
    GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr, GL_EXT_bgra, 
    GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_minmax, 
    GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array, GL_EXT_Cg_shader, 
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit, 
    GL_EXT_framebuffer_multisample, GL_EXT_framebuffer_object, 
    GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays, 
    GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels, 
    GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object, 
    GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color, 
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, 
    GL_EXT_shared_texture_palette, GL_EXT_stencil_two_side, 
    GL_EXT_stencil_wrap, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc, 
    GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp, 
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, 
    GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod, 
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_sRGB, 
    GL_EXT_timer_query, GL_EXT_vertex_array, GL_IBM_rasterpos_clip, 
    GL_IBM_texture_mirrored_repeat, GL_KTX_buffer_region, GL_NV_blend_square, 
    GL_NV_copy_depth_to_color, GL_NV_depth_clamp, GL_NV_fence, 
    GL_NV_float_buffer, GL_NV_fog_distance, GL_NV_fragment_program, 
    GL_NV_fragment_program_option, GL_NV_framebuffer_multisample_coverage, 
    GL_NV_half_float, GL_NV_light_max_exponent, GL_NV_multisample_filter_hint, 
    GL_NV_occlusion_query, GL_NV_packed_depth_stencil, GL_NV_pixel_data_range, 
    GL_NV_point_sprite, GL_NV_primitive_restart, GL_NV_register_combiners, 
    GL_NV_register_combiners2, GL_NV_texgen_reflection, 
    GL_NV_texture_compression_vtc, GL_NV_texture_env_combine4, 
    GL_NV_texture_expand_normal, GL_NV_texture_rectangle, 
    GL_NV_texture_shader, GL_NV_texture_shader2, GL_NV_texture_shader3, 
    GL_NV_vertex_array_range, GL_NV_vertex_array_range2, GL_NV_vertex_program, 
    GL_NV_vertex_program1_1, GL_NV_vertex_program2, 
    GL_NV_vertex_program2_option, GL_SGIS_generate_mipmap, 
    GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow, 
    GL_SUN_slice_accum
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x21 24 tc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x22 24 dc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x24 24 tc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x25 24 tc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x27 24 tc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x28 24 tc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x29 24 tc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x2b 24 tc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x2c 24 tc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x2d 24 tc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x2e 24 tc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x2f 24 tc  0 32  0 r  y  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x30 24 tc  0 32  0 r  y  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x31 24 tc  0 32  0 r  .  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x32 24 tc  0 32  0 r  .  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x33 24 tc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  2 1 Ncon
0x34 24 tc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  2 1 Ncon
0x35 24 tc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  4 1 Ncon
0x36 24 tc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  4 1 Ncon
0x37 24 tc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  2 1 Ncon
0x38 24 tc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  2 1 Ncon
0x39 24 tc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  4 1 Ncon
0x3a 24 tc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  4 1 Ncon
0x3b 24 tc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  2 1 Ncon
0x3c 24 tc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  2 1 Ncon
0x3d 24 tc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  4 1 Ncon
0x3e 24 tc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  4 1 Ncon
0x3f 24 tc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  2 1 Ncon
0x40 24 tc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  2 1 Ncon
0x41 24 tc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  4 1 Ncon
0x42 24 tc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  4 1 Ncon
0x43 24 tc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  2 1 Ncon
0x44 24 tc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  2 1 Ncon
0x45 24 tc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  4 1 Ncon
0x46 24 tc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  4 1 Ncon
0x47 24 tc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  2 1 Ncon
0x48 24 tc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  2 1 Ncon
0x49 24 tc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  4 1 Ncon
0x4a 24 tc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  4 1 Ncon
0x4b 24 dc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x4c 24 dc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x4d 24 dc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x4e 24 dc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x4f 24 dc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x50 24 dc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x51 24 dc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x52 24 dc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x53 24 dc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x54 24 dc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x55 24 dc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x56 24 dc  0 32  0 r  y  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x57 24 dc  0 32  0 r  y  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x58 24 dc  0 32  0 r  .  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x59 24 dc  0 32  0 r  .  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x5a 24 dc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  2 1 Ncon
0x5b 24 dc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  2 1 Ncon
0x5c 24 dc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  4 1 Ncon
0x5d 24 dc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  4 1 Ncon
0x5e 24 dc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  2 1 Ncon
0x5f 24 dc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  2 1 Ncon
0x60 24 dc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  4 1 Ncon
0x61 24 dc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  4 1 Ncon
0x62 24 dc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  2 1 Ncon
0x63 24 dc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  2 1 Ncon
0x64 24 dc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  4 1 Ncon
0x65 24 dc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  4 1 Ncon
0x66 24 dc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  2 1 Ncon
0x67 24 dc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  2 1 Ncon
0x68 24 dc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  4 1 Ncon
0x69 24 dc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  4 1 Ncon
0x6a 24 dc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  2 1 Ncon
0x6b 24 dc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  2 1 Ncon
0x6c 24 dc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  4 1 Ncon
0x6d 24 dc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  4 1 Ncon
0x6e 24 dc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  2 1 Ncon
0x6f 24 dc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  2 1 Ncon
0x70 24 dc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  4 1 Ncon
0x71 24 dc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  4 1 Ncon
0x23 32 tc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x72 32 tc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x73 32 tc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x74 32 tc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x75 32 tc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x76 32 tc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x77 32 tc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x78 32 tc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x79 32 tc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x7a 32 tc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x7b 32 tc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x7c 32 tc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x7d 32 tc  0 32  0 r  y  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x7e 32 tc  0 32  0 r  y  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x7f 32 tc  0 32  0 r  .  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x80 32 tc  0 32  0 r  .  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x81 32 tc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  2 1 Ncon
0x82 32 tc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  2 1 Ncon
0x83 32 tc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  4 1 Ncon
0x84 32 tc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  4 1 Ncon
0x85 32 tc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  2 1 Ncon
0x86 32 tc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  2 1 Ncon
0x87 32 tc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  4 1 Ncon
0x88 32 tc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  4 1 Ncon
0x89 32 tc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  2 1 Ncon
0x8a 32 tc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  2 1 Ncon
0x8b 32 tc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  4 1 Ncon
0x8c 32 tc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  4 1 Ncon
0x8d 32 tc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  2 1 Ncon
0x8e 32 tc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  2 1 Ncon
0x8f 32 tc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  4 1 Ncon
0x90 32 tc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  4 1 Ncon
0x91 32 tc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  2 1 Ncon
0x92 32 tc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  2 1 Ncon
0x93 32 tc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  4 1 Ncon
0x94 32 tc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  4 1 Ncon
0x95 32 tc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  2 1 Ncon
0x96 32 tc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  2 1 Ncon
0x97 32 tc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  4 1 Ncon
0x98 32 tc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  4 1 Ncon

sebastien14 · Le 22/02/2007, à 22:27

sinux a écrit :

Je tourne sur un portable avec un p4 3,06 ghz qui chauffe bcp! Donc peut-être que cela vient de la. Tu as quel proc sebastien14 ?

j'ai un amd athlon xp 2500+

allumé 20 sur 24 environ un a deux plantage par jour visiblement il ne monte pas tre haut en temperature 40°

sebastien14 · Le 22/02/2007, à 22:28

@sinux

Je tourne sur un portable avec un p4 3,06 ghz qui chauffe bcp! Donc peut-être que cela vient de la. Tu as quel proc sebastien14 ?

j'ai un amd athlon xp 2500+

allumé 20 sur 24 environ un a deux plantage par jour visiblement il ne monte pas tre haut en temperature 40°

sebastien14 · Le 22/02/2007, à 22:34

Skippy le Grand Gourou a écrit :

:
echo 2 > /proc/acpi/thermal_zone/THRM/polling
(le PC vérifiera plus souvent la température, et n'attendra pas qu'il soit trop tard, comme c'était le cas chez moi). Si tu as besoin de redémarrer ton PC pour autre chose qu'un freeze, refais-la au démarrage (en fait refais-la à chaque démarrage jusqu'à ce que ça freeze encore : si ça freeze, c'est que ça change rien donc tant pis...).
Et que donne fglrxinfo en console ?

voila ce que donne les deux commandes:

sebastien@ubuntumce:~$ echo 2 > /proc/acpi/thermal_zone/THRM/polling
-bash: /proc/acpi/thermal_zone/THRM/polling: Aucun fichier ou répertoire de ce type
sebastien@ubuntumce:~$ fglrxinfo
-bash: fglrxinfo : commande introuvable

merci encore

sinux · Le 22/02/2007, à 22:46

Si je me trompe pas c'est pas /proc/acpi/thermal_zone/THRM/polling
mais /proc/acpi/thermal_zone/THRM/polling_frequency

Ce que je pensais c'est que la thempérature du système monte gentillement surtout si ton système est allumé 20/24, si la vitesse de rotation du proc est lié à la charge, il n'y a pas de raison pour refroidir et peut-être la temp max est dépassée.

J'ai fais le teste de charge sur mon portable (avec de l'encodage ogg). Temp critique 85C
Au bout de 5sec le ventilo se met à turbiner (temp 69C).
Puis la temp monte à 75C
Et enfin se stabilise à 72C
A la fin de l'encodage la charge chutte à env 0 et le ventilo semet au ralentit. La température baisse quand-même gentillement.

Donc pas de problème tout à l'air en ordre.
Maintenant est-ce que d'enlever l'option noacpi change qqch ?

Dernière modification par sinux (Le 22/02/2007, à 22:47)

sebastien14 · Le 22/02/2007, à 22:54

voila la sopie d'un des mes precedenr post

sebastien@ubuntumce:~$ cat /proc/acpi/thermal_zone/THRM/*
cooling mode:   active
<polling disabled>
state:                   ok
temperature:             38 C
critical (S5):           70 C
passive:                 68 C: tc1=4 tc2=3 tsp=60 devices=0xdffdd338 
active[0]:               68 C: devices=0xdffdde00 
sebastien@ubuntumce:~$

en ce qui concerne la ligne de commande que tu a modifié c"est pareil
aucun resultat

sinux · Le 22/02/2007, à 23:03

Que te donne :
ls /proc/acpi/thermal_zone/
et
ls /proc/acpi/thermal_zone/THRM/

sebastien14 · Le 23/02/2007, à 07:33

sinux a écrit :

Que te donne :
ls /proc/acpi/thermal_zone/
et
ls /proc/acpi/thermal_zone/THRM/

ca donne ca :

sebastien@ubuntumce:~$ ls /proc/acpi/thermal_zone/
THRM
sebastien@ubuntumce:~$ ls /proc/acpi/thermal_zone/THRM/
cooling_mode  polling_frequency  state  temperature  trip_points
sebastien@ubuntumce:~$

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#76 Le 21/02/2007, à 20:54

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#77 Le 21/02/2007, à 21:37

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#78 Le 21/02/2007, à 23:23

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#79 Le 22/02/2007, à 04:30

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#80 Le 22/02/2007, à 08:29

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#81 Le 22/02/2007, à 14:43

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#82 Le 22/02/2007, à 15:37

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#83 Le 22/02/2007, à 16:54

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#84 Le 22/02/2007, à 19:04

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#85 Le 22/02/2007, à 19:56

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#86 Le 22/02/2007, à 20:40

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#87 Le 22/02/2007, à 20:41

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#88 Le 22/02/2007, à 20:55

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#89 Le 22/02/2007, à 21:13

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#90 Le 22/02/2007, à 21:42

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#91 Le 22/02/2007, à 21:44

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#92 Le 22/02/2007, à 22:01

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#93 Le 22/02/2007, à 22:04

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#94 Le 22/02/2007, à 22:27

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#95 Le 22/02/2007, à 22:28

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#96 Le 22/02/2007, à 22:34

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#97 Le 22/02/2007, à 22:46

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#98 Le 22/02/2007, à 22:54

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#99 Le 22/02/2007, à 23:03

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

#100 Le 23/02/2007, à 07:33

Re : Le PC (gnome ?) se fige completement: reset obligatoire.

Pied de page des forums