[Résolu] Pas de son

Sysko le prospecteur · Le 13/10/2007, à 15:40

je sais pa

bon sa marche correctemment, lorsqu'un casque est branch, le son est correctemment redirigé vers la sortie casque et ne sort plus pas les hauts parleurs standard

voili voilou

Dernière modification par Sysko le prospecteur (Le 13/10/2007, à 15:46)

Vysserk3 · Le 13/10/2007, à 16:33

Oki, donc dans alsamixer, tu as bien un controle du volume avec "Headphones" en plus de "PCM" et de "Master" par exemple

@++

sebastien_lnouveau · Le 14/10/2007, à 22:02

Bon j'ai fait ta manip mais le probleme c'est que ca fonctionne toujours pas...en meme temps ma carte son n'est pas reconnu et si ca marche chez toi c'est parcequ'elle est de nouveau reconnu grace a la maj du kernel....sauf que moi j'ai fait les manips qui ont niqués la reconnaisance de ma carte son sur le tout dernier kernel donc impossible de faire reconnaitre ma carte son de nouveau comme toi.

Que faire alors ?

A noter que j'ai découvert un message d'ubuntu a son démarrage (depuis ta manip ou avant ?? je ne sais pas) qui me dit qu'il y a un ou dessymbols inconnus dans le fichier snd-hda-intel.ko (dossier lib/modules/nom du kernel (2.6....)/ubuntu/media/snd-hda-intel

Il me dit egalement de ragarder dmesg (see dmesg).

Donc je vous passe le resultat de cette commande (je n'ai pas le debut car le resultat est trop long...) :

[ 7.452000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 7.452000] sd 2:0:0:0: [sda] Write Protect is off
[ 7.452000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.452000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.452000] sda: sda1 sda2 sda3 <sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.520000] Uniform CD-ROM driver Revision: 3.20
[ 7.520000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 7.520000] sda5 >
[ 7.520000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.524000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.524000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.868000] Attempting manual resume
[ 7.868000] swsusp: Resume From Partition 8:5
[ 7.868000] PM: Checking swsusp image.
[ 7.868000] PM: Resume from disk failed.
[ 7.904000] kjournald starting. Commit interval 5 seconds
[ 7.904000] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.572000] usb-storage: device scan complete
[ 11.576000] scsi 5:0:0:0: Direct-Access Generic- SD/MMC/MS/MSPro 1.00 PQ: 0 ANSI: 0 CCS
[ 11.576000] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 11.576000] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 17.144000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.236000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.252000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.800000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000
[ 17.836000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 18.124000] nvidia: module license 'NVIDIA' taints kernel.
[ 18.376000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.376000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 18.376000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 18.384000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0
[ 18.384000] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 18.384000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.384000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 18.384000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 18.652000] snd_hda_intel: Unknown symbol snd_hwdep_new
[ 18.656000] snd_hda_intel: Unknown symbol snd_hwdep_new
[ 18.816000] lp: driver loaded but no devices found
[ 18.888000] Adding 907632k swap on /dev/sda5. Priority:-1 extents:1 across:907632k
[ 18.960000] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 18.960000] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[ 174.412000] EXT3 FS on sda2, internal journal
[ 175.200000] ACPI: Battery Slot [BAT0] (battery present)
[ 175.492000] ACPI: AC Adapter [AC] (on-line)
[ 175.556000] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 175.568000] No dock devices found.
[ 175.584000] input: Power Button (FF) as /class/input/input4
[ 175.584000] ACPI: Power Button (FF) [PWRF]
[ 175.584000] input: Power Button (CM) as /class/input/input5
[ 175.584000] ACPI: Power Button (CM) [PWRB]
[ 175.584000] input: Lid Switch as /class/input/input6
[ 175.584000] ACPI: Lid Switch [LID0]
[ 175.584000] input: Sleep Button (CM) as /class/input/input7
[ 175.584000] ACPI: Sleep Button (CM) [SLPB]
[ 176.576000] ppdev: user-space parallel port driver
[ 176.716000] r8169: eth0: link down
[ 176.756000] audit(1192384733.686:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5078 profile="/usr/sbin/cupsd"
[ 176.824000] apm: BIOS not found.
[ 177.212000] Failure registering capabilities with primary security module.
[ 177.340000] Bluetooth: Core ver 2.11
[ 177.340000] NET: Registered protocol family 31
[ 177.340000] Bluetooth: HCI device and connection manager initialized
[ 177.340000] Bluetooth: HCI socket layer initialized
[ 177.356000] Bluetooth: L2CAP ver 2.8
[ 177.356000] Bluetooth: L2CAP socket layer initialized
[ 177.392000] Bluetooth: RFCOMM socket layer initialized
[ 177.392000] Bluetooth: RFCOMM TTY layer initialized
[ 177.392000] Bluetooth: RFCOMM ver 1.8
[ 200.576000] NET: Registered protocol family 10
[ 200.576000] lo: Disabled Privacy Extensions
[ 200.580000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 200.580000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 210.568000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.568000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.584000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.584000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.600000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.600000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.616000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.616000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.644000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.644000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.660000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.660000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.672000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.672000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.700000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.700000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.728000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.728000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.756000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.756000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.784000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.784000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 210.812000] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (000000010) is beyond end of object [20070126]
[ 210.812000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.PEGP.VGA0.LCD_._BCM] (Node df89d600), AE_AML_PACKAGE_LIMIT
[ 218.976000] NET: Registered protocol family 17
[ 221.148000] wlan0: Initial auth_alg=1
[ 221.148000] wlan0: authenticate with AP 00:03:c9:0c:46:6d
[ 221.148000] wlan0: RX authentication from 00:03:c9:0c:46:6d (alg=1 transaction=2 status=0)
[ 221.148000] wlan0: replying to auth challenge
[ 221.152000] wlan0: RX authentication from 00:03:c9:0c:46:6d (alg=1 transaction=4 status=0)
[ 221.152000] wlan0: authenticated
[ 221.152000] wlan0: associate with AP 00:03:c9:0c:46:6d
[ 221.156000] wlan0: RX AssocResp from 00:03:c9:0c:46:6d (capab=0x411 status=0 aid=2)
[ 221.156000] wlan0: associated
[ 221.160000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 238.968000] wlan0: no IPv6 routers present
[ 290.296000] ata3.00: exception Emask 0x2 SAct 0x5ffef SErr 0x0 action 0x2 frozen
[ 290.296000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0x5ffef FIS=004040a1:00020000)
[ 290.296000] ata3.00: cmd 61/30:00:e4:d1:ca/00:00:11:00:00/40 tag 0 cdb 0x0 data 24576 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:08:6c:11:cc/00:00:11:00:00/40 tag 1 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:10:74:0b:ce/00:00:11:00:00/40 tag 2 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/20:18:f4:d0:ce/00:00:11:00:00/40 tag 3 cdb 0x0 data 16384 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:28:fc:d0:c9/00:00:11:00:00/40 tag 5 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:30:bc:d2:c9/00:00:11:00:00/40 tag 6 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:38:dc:d2:c9/00:00:11:00:00/40 tag 7 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:40:fc:d2:c9/00:00:11:00:00/40 tag 8 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/20:48:f4:d0:ca/00:00:11:00:00/40 tag 9 cdb 0x0 data 16384 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/60:50:1c:d1:ca/00:00:11:00:00/40 tag 10 cdb 0x0 data 49152 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/30:58:8c:d1:ca/00:00:11:00:00/40 tag 11 cdb 0x0 data 24576 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:60:d4:d1:ca/00:00:11:00:00/40 tag 12 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:68:5c:68:cd/00:00:11:00:00/40 tag 13 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:70:2c:d1:cd/00:00:11:00:00/40 tag 14 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/20:78:24:d1:ce/00:00:11:00:00/40 tag 15 cdb 0x0 data 16384 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:80:4c:d1:ce/01:00:11:00:00/40 tag 16 cdb 0x0 data 135168 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.296000] ata3.00: cmd 61/08:90:e4:52:c9/00:00:11:00:00/40 tag 18 cdb 0x0 data 4096 out
[ 290.296000] res 40/00:84:4c:d1:ce/00:00:11:00:00/40 Emask 0x2 (HSM violation)
[ 290.608000] ata3: soft resetting port
[ 291.116000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 291.148000] ata3.00: configured for UDMA/133
[ 291.148000] ata3: EH complete
[ 291.148000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 291.148000] sd 2:0:0:0: [sda] Write Protect is off
[ 291.148000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 291.148000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2400.168000] ata3.00: exception Emask 0x2 SAct 0x7f9ff SErr 0x0 action 0x2 frozen
[ 2400.168000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0x7f9ff FIS=004040a1:00000400)
[ 2400.168000] ata3.00: cmd 61/08:00:24:d4:a2/00:00:10:00:00/40 tag 0 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/18:08:ac:d4:a2/00:00:10:00:00/40 tag 1 cdb 0x0 data 12288 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:10:d4:d4:a2/00:00:10:00:00/40 tag 2 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:18:04:d5:a2/00:00:10:00:00/40 tag 3 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/20:20:14:d5:a2/00:00:10:00:00/40 tag 4 cdb 0x0 data 16384 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:28:3c:d5:a2/00:00:10:00:00/40 tag 5 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:30:4c:d5:a2/00:00:10:00:00/40 tag 6 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/20:38:84:d5:a2/00:00:10:00:00/40 tag 7 cdb 0x0 data 16384 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:40:cc:d5:a2/00:00:10:00:00/40 tag 8 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:58:0c:d3:a2/00:00:10:00:00/40 tag 11 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:60:34:d3:a2/00:00:10:00:00/40 tag 12 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:68:6c:d3:a2/00:00:10:00:00/40 tag 13 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:70:94:d3:a2/00:00:10:00:00/40 tag 14 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:78:ac:d3:a2/00:00:10:00:00/40 tag 15 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:80:34:d4:a2/00:00:10:00:00/40 tag 16 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/10:88:84:d4:a2/00:00:10:00:00/40 tag 17 cdb 0x0 data 8192 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.168000] ata3.00: cmd 61/08:90:9c:d4:a2/00:00:10:00:00/40 tag 18 cdb 0x0 data 4096 out
[ 2400.168000] res 40/00:44:cc:d5:a2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.480000] ata3: soft resetting port
[ 2400.764000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2400.796000] ata3.00: configured for UDMA/133
[ 2400.796000] ata3: EH complete
[ 2400.796000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 2400.796000] sd 2:0:0:0: [sda] Write Protect is off
[ 2400.796000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2400.796000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2400.800000] ata3.00: exception Emask 0x2 SAct 0x707ff SErr 0x0 action 0x2 frozen
[ 2400.800000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0x707ff FIS=004040a1:00008000)
[ 2400.800000] ata3.00: cmd 61/08:00:d4:db:a2/00:00:10:00:00/40 tag 0 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/18:08:64:dd:a2/00:00:10:00:00/40 tag 1 cdb 0x0 data 12288 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:10:2c:e0:a2/00:00:10:00:00/40 tag 2 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:18:9c:d1:a6/00:00:10:00:00/40 tag 3 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:20:94:d1:aa/00:00:10:00:00/40 tag 4 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:28:5c:d2:aa/00:00:10:00:00/40 tag 5 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:30:94:d2:aa/00:00:10:00:00/40 tag 6 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:38:fc:d2:aa/00:00:10:00:00/40 tag 7 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:40:64:d1:ae/00:00:10:00:00/40 tag 8 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:48:cc:d1:ae/00:00:10:00:00/40 tag 9 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/20:50:14:d2:ae/00:00:10:00:00/40 tag 10 cdb 0x0 data 16384 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/08:80:04:dd:a2/00:00:10:00:00/40 tag 16 cdb 0x0 data 4096 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/10:88:fc:d1:a6/00:00:10:00:00/40 tag 17 cdb 0x0 data 8192 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2400.800000] ata3.00: cmd 61/10:90:dc:d2:aa/00:00:10:00:00/40 tag 18 cdb 0x0 data 8192 out
[ 2400.800000] res 40/00:54:14:d2:ae/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2401.112000] ata3: soft resetting port
[ 2401.284000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2401.340000] ata3.00: configured for UDMA/133
[ 2401.340000] ata3: EH complete
[ 2401.344000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 2401.344000] sd 2:0:0:0: [sda] Write Protect is off
[ 2401.344000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2401.344000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2435.180000] ata3.00: exception Emask 0x2 SAct 0xfc SErr 0x0 action 0x2 frozen
[ 2435.180000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0xfc FIS=004040a1:00000002)
[ 2435.180000] ata3.00: cmd 61/08:10:9c:d1:a6/00:00:10:00:00/40 tag 2 cdb 0x0 data 4096 out
[ 2435.180000] res 40/00:3c:74:d1:b2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2435.180000] ata3.00: cmd 61/10:18:f4:d0:2a/00:00:10:00:00/40 tag 3 cdb 0x0 data 8192 out
[ 2435.180000] res 40/00:3c:74:d1:b2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2435.180000] ata3.00: cmd 61/10:20:fc:d1:a6/00:00:10:00:00/40 tag 4 cdb 0x0 data 8192 out
[ 2435.180000] res 40/00:3c:74:d1:b2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2435.180000] ata3.00: cmd 61/08:28:f4:d1:aa/00:00:10:00:00/40 tag 5 cdb 0x0 data 4096 out
[ 2435.180000] res 40/00:3c:74:d1:b2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2435.180000] ata3.00: cmd 61/08:30:44:d1:b2/00:00:10:00:00/40 tag 6 cdb 0x0 data 4096 out
[ 2435.180000] res 40/00:3c:74:d1:b2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2435.180000] ata3.00: cmd 61/08:38:74:d1:b2/00:00:10:00:00/40 tag 7 cdb 0x0 data 4096 out
[ 2435.180000] res 40/00:3c:74:d1:b2/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2435.492000] ata3: soft resetting port
[ 2436.056000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2436.092000] ata3.00: configured for UDMA/133
[ 2436.092000] ata3: EH complete
[ 2436.096000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 2436.096000] sd 2:0:0:0: [sda] Write Protect is off
[ 2436.096000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2436.096000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2680.192000] ata3.00: NCQ disabled due to excessive errors
[ 2680.192000] ata3.00: exception Emask 0x2 SAct 0x7bfff SErr 0x0 action 0x2 frozen
[ 2680.192000] ata3.00: (spurious completions during NCQ issue=0x0 SAct=0x7bfff FIS=004040a1:00004000)
[ 2680.192000] ata3.00: cmd 61/08:00:9c:d2:de/00:00:10:00:00/40 tag 0 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:08:8c:d3:b6/00:00:10:00:00/40 tag 1 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:10:ac:d3:b6/00:00:10:00:00/40 tag 2 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/18:18:04:d1:c6/00:00:10:00:00/40 tag 3 cdb 0x0 data 12288 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/20:20:24:d1:c6/00:00:10:00:00/40 tag 4 cdb 0x0 data 16384 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:28:b4:d3:c6/00:00:10:00:00/40 tag 5 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:30:cc:d3:c6/00:00:10:00:00/40 tag 6 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:38:f4:d3:c6/00:00:10:00:00/40 tag 7 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:40:1c:d3:ce/00:00:10:00:00/40 tag 8 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:48:04:d1:d2/00:00:10:00:00/40 tag 9 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:50:6c:d3:d6/00:00:10:00:00/40 tag 10 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:58:1c:d3:e2/00:00:10:00:00/40 tag 11 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:60:4c:d2:e6/00:00:10:00:00/40 tag 12 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:68:fc:d3:e6/00:00:10:00:00/40 tag 13 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:78:84:d6:b2/00:00:10:00:00/40 tag 15 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:80:54:d1:b6/00:00:10:00:00/40 tag 16 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:88:6c:d1:ba/00:00:10:00:00/40 tag 17 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.192000] ata3.00: cmd 61/08:90:5c:d2:ba/00:00:10:00:00/40 tag 18 cdb 0x0 data 4096 out
[ 2680.192000] res 40/00:6c:fc:d3:e6/00:00:10:00:00/40 Emask 0x2 (HSM violation)
[ 2680.508000] ata3: soft resetting port
[ 2681.184000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2681.212000] ata3.00: configured for UDMA/133
[ 2681.212000] ata3: EH complete
[ 2681.216000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 2681.216000] sd 2:0:0:0: [sda] Write Protect is off
[ 2681.216000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2681.216000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

elsoso · Le 15/10/2007, à 10:40

pareil, ça ne marche pas et j'ai de nouveau perdu la carte son c'est con parce que j'y ai cru cette fois, voici dmesg (enfin surtout la partie qui nous intéresse ) !

[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_ctl_add
[ 20.144000] snd_hda_intel: Unknown symbol snd_ctl_add
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_new
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_new
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_limit_hw
_rates
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_limit_hw_rates
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_card_registe
r
[ 20.144000] snd_hda_intel: Unknown symbol snd_card_register
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_card_free
[ 20.144000] snd_hda_intel: Unknown symbol snd_card_free
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_prea
llocate_pages_for_all
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_lib_preallocate_pages_for_a
ll
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_card_proc_ne
w
[ 20.144000] snd_hda_intel: Unknown symbol snd_card_proc_new
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_ctl_find_id
[ 20.144000] snd_hda_intel: Unknown symbol snd_ctl_find_id
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_ctl_new1
[ 20.144000] snd_hda_intel: Unknown symbol snd_ctl_new1
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_component_ad
d
[ 20.144000] snd_hda_intel: Unknown symbol snd_component_add
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_card_new
[ 20.144000] snd_hda_intel: Unknown symbol snd_card_new
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_mall
oc_pages
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_lib_malloc_pages
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_ioct
l
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_lib_ioctl
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_free
_pages
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_lib_free_pages
[ 20.144000] snd_hda_intel: Unknown symbol snd_ctl_elem_read
[ 20.144000] snd_hda_intel: Unknown symbol snd_ctl_elem_write
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_set_ops
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_set_ops
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_const
raint_list
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_list
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_device_new
[ 20.144000] snd_hda_intel: Unknown symbol snd_device_new
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_suspend_
all
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_suspend_all
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_card_disconn
ect
[ 20.144000] snd_hda_intel: Unknown symbol snd_card_disconnect
[ 20.144000] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_const
raint_integer
[ 20.144000] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_integer
[ 20.148000] snd_hda_intel: disagrees about version of symbol snd_pcm_period_e
lapsed
[ 20.148000] snd_hda_intel: Unknown symbol snd_pcm_period_elapsed
[ 20.148000] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_const
raint_step
[ 20.148000] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_step
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_ctl_add
[ 20.160000] snd_hda_intel: Unknown symbol snd_ctl_add
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_pcm_new
[ 20.160000] snd_hda_intel: Unknown symbol snd_pcm_new
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_pcm_limit_hw
_rates
[ 20.160000] snd_hda_intel: Unknown symbol snd_pcm_limit_hw_rates
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_card_registe
r
[ 20.160000] snd_hda_intel: Unknown symbol snd_card_register
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_card_free
[ 20.160000] snd_hda_intel: Unknown symbol snd_card_free
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_prea
llocate_pages_for_all
[ 20.160000] snd_hda_intel: Unknown symbol snd_pcm_lib_preallocate_pages_for_a
ll
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_card_proc_ne
w
[ 20.160000] snd_hda_intel: Unknown symbol snd_card_proc_new
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_ctl_find_id
[ 20.160000] snd_hda_intel: Unknown symbol snd_ctl_find_id
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_ctl_new1
[ 20.160000] snd_hda_intel: Unknown symbol snd_ctl_new1
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_component_ad
d
[ 20.160000] snd_hda_intel: Unknown symbol snd_component_add
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_card_new
[ 20.160000] snd_hda_intel: Unknown symbol snd_card_new
[ 20.160000] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_mall
oc_pages
[ 20.160000] snd_hda_intel: Unknown symbol snd_pcm_lib_malloc_pages
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_ioct
l
[ 20.164000] snd_hda_intel: Unknown symbol snd_pcm_lib_ioctl
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_pcm_lib_free
_pages
[ 20.164000] snd_hda_intel: Unknown symbol snd_pcm_lib_free_pages
[ 20.164000] snd_hda_intel: Unknown symbol snd_ctl_elem_read
[ 20.164000] snd_hda_intel: Unknown symbol snd_ctl_elem_write
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_pcm_set_ops
[ 20.164000] snd_hda_intel: Unknown symbol snd_pcm_set_ops
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_const
raint_list
[ 20.164000] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_list
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_device_new
[ 20.164000] snd_hda_intel: Unknown symbol snd_device_new
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_pcm_suspend_
all
[ 20.164000] snd_hda_intel: Unknown symbol snd_pcm_suspend_all
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_card_disconn
ect
[ 20.164000] snd_hda_intel: Unknown symbol snd_card_disconnect
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_const
raint_integer
[ 20.164000] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_integer
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_pcm_period_e
lapsed
[ 20.164000] snd_hda_intel: Unknown symbol snd_pcm_period_elapsed
[ 20.164000] snd_hda_intel: disagrees about version of symbol snd_pcm_hw_const
raint_step
[ 20.164000] snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_step

eldo · Le 15/10/2007, à 11:45

bonjour à tous
je suis un debutant avec ubuntu mais j'ai pas de son.
des fois au debut j'ai le son mais si je clik sur le bouton pour dimunier ou augmenter,
le son disparait. j'ai telecharger plein de paquets alsa toujours le meme probleme.
cette commande me donne rien : lspci | grep audio.
mais cette derniére me donne ceci:
lsmod | grep snd:
aider moi je commence à kiffer ubuntu et je veux pas laisser tomber à cause du son
merci

kaba@ubuntu:~$ lsmod | grep snd
snd_hda_intel 21912 2
snd_hda_codec 205056 1 snd_hda_intel
snd_pcm_oss 44544 0
snd_mixer_oss 17408 1 snd_pcm_oss
snd_pcm 79876 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 32896 0
snd_seq_midi 9600 0
snd_rawmidi 25472 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 23684 2 snd_pcm,snd_seq
snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 54020 14 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8672 1 snd
snd_page_alloc 10888 2 snd_hda_intel,snd_pcm

[AlsaMixer v1.0.13 (Press Escape to quit)]──────────────────┐
│ Card: HDA Intel │
│ Chip: Analog Devices AD1986A │
│ View: [Playback] Capture All │
│ Item: Headphone [dB gain=-13.50, -13.50] │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │ │ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ >
│ │▒▒│ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ >
│ │▒▒│ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ >
│ │▒▒│ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ >
│ │▒▒│ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ >
│ │▒▒│ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ >
│ │▒▒│ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ │
│ │▒▒│ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ │
│ │▒▒│ │ ▒│ │▒▒│ │ │ │ │ │ │ │ │ │▒▒│ │
│ ├──┤ ├──┤ ├──┤ ├──┤ ├──┤ ├──┤ ├──┤ ├──┤ │
│ │OO│ │OO│ │OO│ │MM│ │MM│ │MM│ │MM│ │OO│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 71<>71 0<>100 100<>100 0<>0 0 0 0<>0 81<>81 │
│ <Headphon> PCM Front Surround Center LFE Line CD

Sysko le prospecteur · Le 15/10/2007, à 14:52

@sebastien_lnouveau :

bon après avoir lu ton mess j'ai volontairement reniqué mon alsa , donc je me retrouve dans la même situtation que toi
plus de maj du kernel possible et plus de son et dmesg me donne le même resulat que toi

je refait ma manip donné précedemment , je reboot et le son remarche

donc ta carte son est-elle bien la même que la mienne : realtek alc268
et si oui ton pc est-il bien un acer ? si non il faut changer

la ligne
options snd-hda-intel model=acer et remplacer acer par la marque de ton pc

@elsoso :

lors de la manip , tu n'as aucun message d'erreur ?
car flut de zut j'étais pourtant sur qu'avec cela sa devrait marcher vu que ta la même carte et la meme marque de pc que moi

@ eldo :

peux-tu me dire exactement quand tu as le son ( as tu le son de demarrage ? )
si tu lis un fichier audio via amarok ou autre , a tu le son ?

tu me dis que le son disparait :
àce moment la quand tu fait un alsamixer que te donne la reponse

ps ( pour la reponse de alsamixer , fait plutot une capture d'ecran , car le copier coller , n'es pas lisible )

voili voilou

sebastien_lnouveau · Le 15/10/2007, à 18:09

Merci d'avoir pris autant de risque pour moi et de m'aider comme tu le fais.

Effectivement ce n'est pas le meme model...

J'ai un medion MD 96367
Card: HDA Intel
Chip: Realtek ID 268

Que faire ?

Sysko le prospecteur · Le 15/10/2007, à 21:32

sinon boaf y avait pas temps de risque que sa, au pire j'avais pu le son , ce qui aurait pas été grave

donc sinon
teste demettre
options snd-hda-intel model=medion

la ou je met

options snd-hda-intel model=acer

sebastien_lnouveau · Le 15/10/2007, à 22:07

Merci d'etre toujours la pour m'aider
Cette manip ne change rien (j'ai fait ce que t'as dis pour medion et j'ai redémarré) : carte son plus reconnue.

J'ai remarqué qu'avec un alsaconf, ma carte son étant détecté. Je lui ai dit de l'installer mais ca change rien du tout...:(

elsoso · Le 16/10/2007, à 09:32

@ sysko : ben non je n'ai eu aucun problème lors de l'installation...

Sysko le prospecteur · Le 16/10/2007, à 09:59

La je dois avouer que je suis à cours d'idée

zut de flute alors ,

à moins que ....

vous aviez compilez avant alsa-lib et alsa-tool ? les deux devant être de la même version que votre alsa-driver

d'ailleurs je viens de remarquer que la version finale de alsa 1.0.15 vient de sortir , donc ptêt qu'avec cette nouvelle versionn sa marchera , on peut toujours esperer ^^

sinon que vous donne

sudo nano /etc/modules

et

sudo nano /etc/modprobe.d/sound

?

et sinon seb , a la place de medion si tu met auto ?

( j'écris tout ce qui me passe par la tête pour ne pas oublier de vous le dire ^^, donc ne faîtes pas tout en même temps , donnez moi d'abord les réponses à mes questions , après je vous dirais quoi faire )

Dernière modification par Sysko le prospecteur (Le 16/10/2007, à 10:10)

elsoso · Le 16/10/2007, à 10:06

vu que j'ai fait de nombreuses manip, alsa-lib et tools je les ai compilés plusieurs fois avant mais pas spécifiquement cette fois là. ouais c'est vraiment bizarre.
quand je regarde dans synaptic, j'ai alsa-tools d'installé mais pas de trace d'alsa-lib. il existe en .deb ?

Sysko le prospecteur · Le 16/10/2007, à 10:11

j'ai rajouter des truc dans mon post d'avant ^^

elsoso · Le 16/10/2007, à 10:24

merci pour ta réactivité sysko.
voilà les infos :

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
fuse
lp
sbp2
ndiswrapper

GNU nano 2.0.6 Fichier : /etc/modprobe.d/sound
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel

Sysko le prospecteur · Le 16/10/2007, à 10:31

si a ton /etc/modprobe.d/sound tu rajoute :

alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss

si tu reboot cela donne quoi ?

au fait alsamixer te donne rien du tout c'est cela?

ps: pour la reactivité , c'est normal j'suis encore en vacances d'été ^^ mon école reprend que le 5 novembre héhé

Dernière modification par Sysko le prospecteur (Le 16/10/2007, à 10:32)

elsoso · Le 16/10/2007, à 10:39

guillaume@guillaume-laptop:~$ alsamixer
alsamixer: function snd_ctl_open failed for default: No such device

elsoso · Le 16/10/2007, à 10:50

je viens d'aller chopper ça http://http.us.debian.org/debian/pool/m … sa-driver/ et en installant la dernière version, j'ai récupéré la reconnaissance de ma carte. par contre toujours pas de son. il doit y avoir un paramètre à la con à modifier !

Sysko le prospecteur · Le 16/10/2007, à 11:11

hum c pas tellement la dernière version lol , enfin si tu a recupéré ta carte son c'est deja pas mal

alsamixer te donne quoi à présent?

donc tu à installer la version 1.0.14 c'est cela?

Dernière modification par Sysko le prospecteur (Le 16/10/2007, à 11:11)

elsoso · Le 16/10/2007, à 11:24

je voulais dire la dernière version dispo qui est tout de même plus récente que celle des dépôts.
alsamixer me redonne exactement la même chose qu'en page 1 http://forum.ubuntu-fr.org/viewtopic.ph … 0#p1218100
précisément j'ai installé ça : alsa-source_1.0.14-2_all.deb

Sysko le prospecteur · Le 16/10/2007, à 11:37

ok

donc j'ai lu quelque truc et donc à présent :

soit tu telecharge depuis alsa-project la version 1.0.15 ( tu recompile et tu installe de la manière dont tu doit re habitué mainteant lol ) qui devrait surement regler le probleme ( j'espere ^^)
soit tu cherche le patch realtek pour alsa ( je sais qu'il reglait pas mal de pbr pour alsa1.0.14 mais ou on le trouve aucune idée , en même temps j'ai pas super cherché )

donc voili

elsoso · Le 16/10/2007, à 12:38

j'imagine que la version 1.0.15 va être prochainement dans les dépôts non ? ceux d'ubuntu ou de debian. Vu que c'est un projet important et vu le nb de personnes qui galèrent avec le son, je pense qu'il devrait y avoir un packetage. sinon effectivement je compilerai.
le patch real je l'ai essayé il m'a viré la carte son donc je vais éviter lol.

Sysko le prospecteur · Le 16/10/2007, à 13:48

pour le patch , tu l'a bien copier coller dans les sources de alsadriver et ensuite seulement recompilé alsadriver ?

sinon ouaip au pire je pense que bientot le 1.015 sera dispo en .deb
donc vaut mieux attendre je pense , même si sa coute pas grand chose de tester quelque truc entre ^^

elsoso · Le 17/10/2007, à 09:27

j'avoue que je ne me rappelle plus exactement l'ordre des manip. en même temps j'ai suivi des tutoriels donc j'ai dû respecter le protocole.
je vais attendre tranquillement.

Capidunord · Le 21/10/2007, à 00:29

Salut

J'ai moi aussi un acer 7220 et je viens (avec beauuuuuuucoup d'émotion) d'entendre les haut-parleurs du pc faire du son...

J'ai procédé ainsi :

1) identifie ton noyau :

uname -r

2) installer, si ce n'est pas le cas, "linux-headers-'lenomdetonnoyau'" via synaptic par exemple. (normalement c'est déjà installé)

3) Rendez-vous sur http://www.alsa-project.org/main/index.php/Download, telecharger au moins alsa-driver, alsa-lib, alsa-utils (version 1.0.15 pour les 3). Dans la suite, je supposerais que ces archives sont dans /home/tonnom/alsa/

4) Extraire ces archives, ouvrir un terminal, puis

cd ~/alsa/alsa-driver-1.0.15

Ensuite on configure/compile/installe :

./configure

puis

make

puis

sudo make install

5) repete cette opération pour les 2 autres archives (j'ai compilé alsa-lib avant alsa-utils, je ne sais pas si c'est important)

6) dans le terminal :

sudo alsaconf

et selectionne ta carte.

7) Dans le terminal :

sudo gedit /etc/modprobe.d/alsa-base

et ajoute les lignes suivantes (tout en bas):

options snd-hda-intel model=acer position_fix=0 enable=yes
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd-cmipci mpu_port=0x330 fm_port=0x388

8) reboot...

Et la pour moi ça a marché. Evidement je ne te garantis rien, mais bon...

Dernière modification par Capidunord (Le 11/11/2007, à 10:48)

elsoso · Le 21/10/2007, à 00:53

ça sent bon tout ça. j'essaye demain.
merci

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 13/10/2007, à 15:40

Re : [Résolu] Pas de son

#27 Le 13/10/2007, à 16:33

Re : [Résolu] Pas de son

#28 Le 14/10/2007, à 22:02

Re : [Résolu] Pas de son

#29 Le 15/10/2007, à 10:40

Re : [Résolu] Pas de son

#30 Le 15/10/2007, à 11:45

Re : [Résolu] Pas de son

#31 Le 15/10/2007, à 14:52

Re : [Résolu] Pas de son

#32 Le 15/10/2007, à 18:09

Re : [Résolu] Pas de son

#33 Le 15/10/2007, à 21:32

Re : [Résolu] Pas de son

#34 Le 15/10/2007, à 22:07

Re : [Résolu] Pas de son

#35 Le 16/10/2007, à 09:32

Re : [Résolu] Pas de son

#36 Le 16/10/2007, à 09:59

Re : [Résolu] Pas de son

#37 Le 16/10/2007, à 10:06

Re : [Résolu] Pas de son

#38 Le 16/10/2007, à 10:11

Re : [Résolu] Pas de son

#39 Le 16/10/2007, à 10:24

Re : [Résolu] Pas de son

#40 Le 16/10/2007, à 10:31

Re : [Résolu] Pas de son

#41 Le 16/10/2007, à 10:39

Re : [Résolu] Pas de son

#42 Le 16/10/2007, à 10:50

Re : [Résolu] Pas de son

#43 Le 16/10/2007, à 11:11

Re : [Résolu] Pas de son

#44 Le 16/10/2007, à 11:24

Re : [Résolu] Pas de son

#45 Le 16/10/2007, à 11:37

Re : [Résolu] Pas de son

#46 Le 16/10/2007, à 12:38

Re : [Résolu] Pas de son

#47 Le 16/10/2007, à 13:48

Re : [Résolu] Pas de son

#48 Le 17/10/2007, à 09:27

Re : [Résolu] Pas de son

#49 Le 21/10/2007, à 00:29

Re : [Résolu] Pas de son

#50 Le 21/10/2007, à 00:53

Re : [Résolu] Pas de son

Pied de page des forums