Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 23/01/2014, à 16:40

claire barnouin

[résolu] demarrage Unbutu

Bonjour,je viens de'installer unbutu avec un cd;aparamment  cela c'est bien passer ,seulement a l'ouverture de la prochaine session un message me demande de booter et je suis obliger de remettre le cd d'instalation et de choisir dans un menu.Que dois je faire pour ne plus avoir besoin du cd?
Merci d'avance

Dernière modification par claire barnouin (Le 27/01/2014, à 14:38)

Hors ligne

#2 Le 23/01/2014, à 16:43

nam1962

Re : [résolu] demarrage Unbutu

Quelle version as tu installée? comment as tu fait ton install ?


[ Modéré ]

Hors ligne

#3 Le 23/01/2014, à 17:07

claire barnouin

Re : [résolu] demarrage Unbutu

linux secure remix avec le cd et j'ai écrasé w8

Hors ligne

#4 Le 23/01/2014, à 17:55

nam1962

Re : [résolu] demarrage Unbutu

Ah, je ne connais pas les spécificités de Secure remix.
En pas mal de dizaines d'install de Xubuntu jamais eu ce truc.
C'est peut être idiot, mais si tu décoches CD dans tes dépots (voir section A du tuto dans ma signature) ça donne quoi ?


[ Modéré ]

Hors ligne

#5 Le 23/01/2014, à 18:13

malbo

Re : [résolu] demarrage Unbutu

Depuis une session de Linux Secure Remix, peux-tu faire un Boot-Info (ne fais pas la "Réparation recommandée", fais seulement le Boot-Info) : http://doc.ubuntu-fr.org/tutoriel/boot-info

Tu n'aurais pas dû prendre Linux Secure Remix : ce machin n'est pas entretenu. Il propose une version Ubuntu 13.04 qui est obsolète - plus mise à jour - ce mois-ci (voir ici). En plus de ça, il faut penser à le mettre à jour (voir mon post) avant de s'en servir : donc pour faire le Boot-Info que je te demande, il faut le mettre à jour. Pour faire une "Réparation recommandée" avec Boot-Repair, il faut également penser à le mettre à jour. Ce qu'il fallait utiliser, c'est un support live de Ubuntu 13.10 64 bits version officielle (fichier ubuntu-13.10-desktop-amd64.iso à télécharger ici)

Dernière modification par malbo (Le 23/01/2014, à 18:33)

Hors ligne

#6 Le 24/01/2014, à 07:27

claire barnouin

Re : [résolu] demarrage Unbutu

voici le boot-inf:http://paste.ubuntu.com/6806928
Il ne voudrais pas mieux que je réinstalle avec ce que tu me propose,
Merci de ton aide

Hors ligne

#7 Le 24/01/2014, à 08:05

malbo

Re : [résolu] demarrage Unbutu

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 12May2013]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 2048 
    of the same hard drive for core.img. core.img is at this location and 
    looks in partition 94 for .

sda1: __________________________________________________________________________

    File system:       BIOS Boot partition
    Boot sector type:  Grub2's core.img
    Boot sector info: 

sda2: __________________________________________________________________________

    File system:       ext2
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        /grub/grub.cfg /grub/i386-pc/core.img

sda3: __________________________________________________________________________

    File system:       LVM2_member
    Boot sector type:  -
    Boot sector info: 

ubuntu-vg-root': _______________________________________________________________

    File system:       
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

ubuntu-vg-swap_1': _____________________________________________________________

    File system:       
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''
mount: unknown filesystem type ''

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 3000.6 GB, 3000592982016 bytes
255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 4,294,967,295 4,294,967,295  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048         4,095         2,048 BIOS Boot partition
/dev/sda2           4,096       503,807       499,712 Data partition (Windows/Linux)
/dev/sda3         503,808 2,639,306,751 2,638,802,944 Logical Volume Manager (LVM) partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/mapper/ubuntu--vg-root 4be6a2ee-8520-482c-b91a-c8cd39ba1e24   ext4       
/dev/mapper/ubuntu--vg-swap_1 cd1dc2e0-de4c-484e-a74b-c13de85276c9   swap       
/dev/sda2        13f064c8-5242-49dd-98a4-82b8d209dcde   ext2       
/dev/sda3        G4LwUv-Mp8L-fYtA-aFQm-nL3v-ne4V-DmlOsQ LVM2_member 
/dev/sr0                                                iso9660    Linux Secure 13.04 64bit

========================= "ls -R /dev/mapper/" output: =========================

/dev/mapper:
control
ubuntu--vg-root
ubuntu--vg-swap_1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime)


============================= sda2/grub/grub.cfg: ==============================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod lvm
insmod ext2
set root='lvm/ubuntu--vg-root'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint='lvm/ubuntu--vg-root'  4be6a2ee-8520-482c-b91a-c8cd39ba1e24
else
  search --no-floppy --fs-uuid --set=root 4be6a2ee-8520-482c-b91a-c8cd39ba1e24
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4be6a2ee-8520-482c-b91a-c8cd39ba1e24' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  13f064c8-5242-49dd-98a4-82b8d209dcde
	else
	  search --no-floppy --fs-uuid --set=root 13f064c8-5242-49dd-98a4-82b8d209dcde
	fi
	linux	/vmlinuz-3.8.0-19-generic root=/dev/mapper/ubuntu--vg-root ro   quiet splash $vt_handoff
	initrd	/initrd.img-3.8.0-19-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-4be6a2ee-8520-482c-b91a-c8cd39ba1e24' {
	menuentry 'Ubuntu, avec Linux 3.8.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-advanced-4be6a2ee-8520-482c-b91a-c8cd39ba1e24' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  13f064c8-5242-49dd-98a4-82b8d209dcde
		else
		  search --no-floppy --fs-uuid --set=root 13f064c8-5242-49dd-98a4-82b8d209dcde
		fi
		echo	'Chargement de Linux 3.8.0-19-generic…'
		linux	/vmlinuz-3.8.0-19-generic root=/dev/mapper/ubuntu--vg-root ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/initrd.img-3.8.0-19-generic
	}
	menuentry 'Ubuntu, avec Linux 3.8.0-19-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.0-19-generic-recovery-4be6a2ee-8520-482c-b91a-c8cd39ba1e24' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  13f064c8-5242-49dd-98a4-82b8d209dcde
		else
		  search --no-floppy --fs-uuid --set=root 13f064c8-5242-49dd-98a4-82b8d209dcde
		fi
		echo	'Chargement de Linux 3.8.0-19-generic…'
		linux	/vmlinuz-3.8.0-19-generic root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/initrd.img-3.8.0-19-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  13f064c8-5242-49dd-98a4-82b8d209dcde
	else
	  search --no-floppy --fs-uuid --set=root 13f064c8-5242-49dd-98a4-82b8d209dcde
	fi
	linux16	/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  13f064c8-5242-49dd-98a4-82b8d209dcde
	else
	  search --no-floppy --fs-uuid --set=root 13f064c8-5242-49dd-98a4-82b8d209dcde
	fi
	linux16	/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   0.053621292 = 0.057575424    grub/grub.cfg                                  1
   0.053837776 = 0.057807872    grub/i386-pc/core.img                          2
   0.013116837 = 0.014084096    vmlinuz-3.8.0-19-generic                      23
   0.065623283 = 0.070462464    initrd.img-3.8.0-19-generic                   78

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on ubuntu-vg-root'


Unknown BootLoader on ubuntu-vg-swap_1'



========= Devices which don't seem to have a corresponding hard drive: =========

sdb 

=============================== StdErr Messages: ===============================

cat: write error: Broken pipe
File descriptor 8 (/proc/3805/mounts) leaked on lvscan invocation. Parent PID 10740: bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvscan invocation. Parent PID 10740: bash
File descriptor 8 (/proc/3805/mounts) leaked on lvdisplay invocation. Parent PID 10747: bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvdisplay invocation. Parent PID 10747: bash
  skip_dev_dir: Couldn't split up device name ubuntu-vg-root'
  Volume group name ubuntu-vg-root' has invalid characters
  Skipping volume group ubuntu-vg-root'
File descriptor 8 (/proc/3805/mounts) leaked on lvdisplay invocation. Parent PID 10750: bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvdisplay invocation. Parent PID 10750: bash
  skip_dev_dir: Couldn't split up device name ubuntu-vg-root'
  Volume group name ubuntu-vg-root' has invalid characters
  Skipping volume group ubuntu-vg-root'
File descriptor 8 (/proc/3805/mounts) leaked on lvchange invocation. Parent PID 10204: bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvchange invocation. Parent PID 10204: bash
  skip_dev_dir: Couldn't split up device name ubuntu-vg-root'
  Volume group name ubuntu-vg-root' has invalid characters
  Skipping volume group ubuntu-vg-root'
hexdump: /dev/mapper/ubuntu-vg-root': No such file or directory
hexdump: /dev/mapper/ubuntu-vg-root': No such file or directory
File descriptor 8 (/proc/3805/mounts) leaked on lvdisplay invocation. Parent PID 10779: bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvdisplay invocation. Parent PID 10779: bash
  skip_dev_dir: Couldn't split up device name ubuntu-vg-swap_1'
  Volume group name ubuntu-vg-swap_1' has invalid characters
  Skipping volume group ubuntu-vg-swap_1'
File descriptor 8 (/proc/3805/mounts) leaked on lvdisplay invocation. Parent PID 10782: bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvdisplay invocation. Parent PID 10782: bash
  skip_dev_dir: Couldn't split up device name ubuntu-vg-swap_1'
  Volume group name ubuntu-vg-swap_1' has invalid characters
  Skipping volume group ubuntu-vg-swap_1'
File descriptor 8 (/proc/3805/mounts) leaked on lvchange invocation. Parent PID 10204: bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvchange invocation. Parent PID 10204: bash
  skip_dev_dir: Couldn't split up device name ubuntu-vg-swap_1'
  Volume group name ubuntu-vg-swap_1' has invalid characters
  Skipping volume group ubuntu-vg-swap_1'
hexdump: /dev/mapper/ubuntu-vg-swap_1': No such file or directory
hexdump: /dev/mapper/ubuntu-vg-swap_1': No such file or directory

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-01-24__06h18 ===================
boot-repair version : 3.199~ppa2~raring
boot-sav version : 3.199~ppa2~raring
glade2script version : 3.2.2~ppa45~raring
boot-sav-extra version : 3.199~ppa2~raring
BLKID BEFORE LVM ACTIVATION:
/dev/loop0: TYPE="squashfs"
/dev/sda2: UUID="13f064c8-5242-49dd-98a4-82b8d209dcde" TYPE="ext2"
/dev/sda3: UUID="G4LwUv-Mp8L-fYtA-aFQm-nL3v-ne4V-DmlOsQ" TYPE="LVM2_member"
/dev/sr0: LABEL="Linux Secure 13.04 64bit" TYPE="iso9660"
/dev/mapper/ubuntu--vg-root: UUID="4be6a2ee-8520-482c-b91a-c8cd39ba1e24" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="cd1dc2e0-de4c-484e-a74b-c13de85276c9" TYPE="swap"
MODPROBE
VGSCAN
File descriptor 8 (/proc/3805/mounts) leaked on vgscan invocation. Parent PID 3817: /bin/bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on vgscan invocation. Parent PID 3817: /bin/bash
Reading all physical volumes.  This may take a while...
Found volume group "ubuntu-vg" using metadata type lvm2
VGCHANGE
File descriptor 8 (/proc/3805/mounts) leaked on vgchange invocation. Parent PID 3817: /bin/bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on vgchange invocation. Parent PID 3817: /bin/bash
2 logical volume(s) in volume group "ubuntu-vg" now active
File descriptor 8 (/proc/3805/mounts) leaked on lvscan invocation. Parent PID 3817: /bin/bash
File descriptor 18 (/usr/share/icons/ubuntu-mono-dark/places/16/user-home.svg) leaked on lvscan invocation. Parent PID 3817: /bin/bash
LVSCAN:
ACTIVE            '/dev/ubuntu-vg/root' [2.70 TiB] inherit
ACTIVE            '/dev/ubuntu-vg/swap_1' [31.88 GiB] inherit

BLKID BEFORE RAID ACTIVATION:
/dev/loop0: TYPE="squashfs"
/dev/sda2: UUID="13f064c8-5242-49dd-98a4-82b8d209dcde" TYPE="ext2"
/dev/sda3: UUID="G4LwUv-Mp8L-fYtA-aFQm-nL3v-ne4V-DmlOsQ" TYPE="LVM2_member"
/dev/sr0: LABEL="Linux Secure 13.04 64bit" TYPE="iso9660"
/dev/mapper/ubuntu--vg-root: UUID="4be6a2ee-8520-482c-b91a-c8cd39ba1e24" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="cd1dc2e0-de4c-484e-a74b-c13de85276c9" TYPE="swap"
dmraid -si -c: no raid disks
No DMRAID disk.
RAID détecté. Vous voudrez peut-être re-essayer après avoir installé les paquets [mdadm]. (sudo apt-get install -y --force-yes mdadm --no-install-recommends)
Warning: no DMRAID nor MD_ARRAY.
boot-repair is executed in live-session (Linux-Secure-Remix-64bit 20may2013, raring, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=fr keyboard-configuration/layoutcode?=fr keyboard-configuration/variantcode?=oss
[dmraid -sa -c] no
[dmraid -sa -c] raid
[dmraid -sa -c] disks
Set sda as corresponding disk of mapper/ubuntu--vg-root

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/mapper/ubuntu--vg-root doesn't contain a valid partition table
Disk /dev/mapper/ubuntu--vg-swap_1 doesn't contain a valid partition table

=================== os-prober:
/dev/mapper/ubuntu--vg-root:Linux-Secure-Remix-64bit 20may2013 (13.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda2: UUID="13f064c8-5242-49dd-98a4-82b8d209dcde" TYPE="ext2"
/dev/sda3: UUID="G4LwUv-Mp8L-fYtA-aFQm-nL3v-ne4V-DmlOsQ" TYPE="LVM2_member"
/dev/sr0: LABEL="Linux Secure 13.04 64bit" TYPE="iso9660"
/dev/mapper/ubuntu--vg-root: UUID="4be6a2ee-8520-482c-b91a-c8cd39ba1e24" TYPE="ext4"
/dev/mapper/ubuntu--vg-swap_1: UUID="cd1dc2e0-de4c-484e-a74b-c13de85276c9" TYPE="swap"

[dmraid -sa -c] no
[dmraid -sa -c] raid
[dmraid -sa -c] disks
Set sda as corresponding disk of mapper/ubuntu--vg-root

1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.



=================== mapper/ubuntu--vg-root/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== mapper/ubuntu--vg-root/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avril 24  2013 grub.d
total 72
-rwxr-xr-x 1 root root  7541 avril  9  2013 00_header
-rwxr-xr-x 1 root root  5974 avril  9  2013 05_debian_theme
-rwxr-xr-x 1 root root 11381 avril  9  2013 10_linux
-rwxr-xr-x 1 root root 10258 avril  9  2013 20_linux_xen
-rwxr-xr-x 1 root root  1688 déc.   5  2012 20_memtest86+
-rwxr-xr-x 1 root root 10976 avril  9  2013 30_os-prober
-rwxr-xr-x 1 root root  1426 avril  9  2013 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril  9  2013 40_custom
-rwxr-xr-x 1 root root   216 avril  9  2013 41_custom
-rw-r--r-- 1 root root   483 avril  9  2013 README


/boot detected in the fstab of mapper/ubuntu--vg-root: UUID=13f064c8-5242-49dd-98a4-82b8d209dcde  (sda2)
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda2	: sda,	is-sepboot,	grubenv-ok	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
mapper/ubuntu--vg-root	: sda,	not-sepboot,	no-grubenv	grub2,	grub-pc ,	update-grub,	64,	no-boot,	is-os,	not--efi--part,	fstab-has-goodBOOT,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/mapper/ubuntu--vg-root.

sda	: GPT,	BIOS_boot,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST3000DM001-9YN1 (scsi)
Disk /dev/sda: 3001GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system  Name  Flags
1      1049kB  2097kB  1049kB                     bios_grub
2      2097kB  258MB   256MB   ext2
3      258MB   3001GB  3000GB                     lvm


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/ubuntu--vg-root: 2966GB
Sector size (logical/physical): 512B/4096B
Partition Table: loop

Number  Start  End     Size    File system  Flags
1      0.00B  2966GB  2966GB  ext4


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/ubuntu--vg-swap_1: 34.2GB
Sector size (logical/physical): 512B/4096B
Partition Table: loop

Number  Start  End     Size    File system     Flags
1      0.00B  34.2GB  34.2GB  linux-swap(v1)



                                                                          
Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.

                                                                          
Error: /dev/sr0: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:3001GB:scsi:512:4096:gpt:ATA ST3000DM001-9YN1;
1:1049kB:2097kB:1049kB:::bios_grub;
2:2097kB:258MB:256MB:ext2::;
3:258MB:3001GB:3000GB:::lvm;

BYT;
/dev/mapper/ubuntu--vg-root:2966GB:dm:512:4096:loop:Linux device-mapper (linear);
1:0.00B:2966GB:2966GB:ext4::;

BYT;
/dev/mapper/ubuntu--vg-swap_1:34.2GB:dm:512:4096:loop:Linux device-mapper (linear);
1:0.00B:34.2GB:34.2GB:linux-swap(v1)::;


                                                                          
Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.

                                                                          
Error: /dev/sr0: unrecognised disk label


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda2 on /mnt/boot-sav/sda2 type ext2 (rw)
/dev/mapper/ubuntu--vg-root on /mnt/boot-sav/mapper/ubuntu--vg-root type ext4 (rw)


=================== ls:
/sys/block/dm-0 (filtered):  alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/dm-1 (filtered):  alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dm-0 dm-1 dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 rts51x0 sda sda1 sda2 sda3 sdb sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout ubuntu-vg uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control ubuntu--vg-root ubuntu--vg-swap_1

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/mapper/ubuntu--vg-root doesn't contain a valid partition table
Disk /dev/mapper/ubuntu--vg-swap_1 doesn't contain a valid partition table

=================== df -Th:

Filesystem                  Type       Size  Used Avail Use% Mounted on
/cow                        overlayfs   16G   28M   16G   1% /
udev                        devtmpfs    16G   12K   16G   1% /dev
tmpfs                       tmpfs      3.2G  820K  3.2G   1% /run
/dev/sr0                    iso9660    782M  782M     0 100% /cdrom
/dev/loop0                  squashfs   738M  738M     0 100% /rofs
none                        tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs                       tmpfs       16G  944K   16G   1% /tmp
none                        tmpfs      5.0M     0  5.0M   0% /run/lock
none                        tmpfs       16G   76K   16G   1% /run/shm
none                        tmpfs      100M   40K  100M   1% /run/user
/dev/sda2                   ext2       229M   30M  187M  14% /mnt/boot-sav/sda2
/dev/mapper/ubuntu--vg-root ext4       2.7T  2.9G  2.6T   1% /mnt/boot-sav/mapper/ubuntu--vg-root

=================== fdisk -l:

Disk /dev/sda: 3000.6 GB, 3000592982016 bytes
255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x61afbb41

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  4294967295  2147483647+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/mapper/ubuntu--vg-root: 2965.8 GB, 2965771386880 bytes
255 heads, 63 sectors/track, 360567 cylinders, total 5792522240 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/ubuntu--vg-swap_1: 34.2 GB, 34229714944 bytes
255 heads, 63 sectors/track, 4161 cylinders, total 66854912 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000


/boot détecté. Veuillez vérifier les options.

=================== Default settings
Recommended-Repair
This setting would purge (in order to enable-raid enable-lvm) and reinstall the grub2 of mapper/ubuntu--vg-root into the MBR of sda, using the following options:        sda2/boot,
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

Tu avais les cases "Chiffrer la nouvelle installation d'Ubuntu par sécurité" et "Utiliser LVM avec la nouvelle installation d'Ubuntu" qui étaient cochées à cette étape de l'installation, c'est une très mauvaise idée quand on est novice (*) et je te recommande de ne rien chiffrer du tout si tu refais ton install.
Si donc tu acceptes ma proposition d'installer Ubuntu 13.10 64 bits, je te prie de modifier auparavant le réglage de ton "Bios" (ton système UEFI) pour passer en mode UEFI au lieu du mode Legacy. En effet, on peut voir dans ton Boot-Info que le démarrage sur le liveDVD n'a pas été fait en mode EFI :

=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.

Quand ce sera fait (ce passage de Legacy en UEFI), démarre sur ton support live de Ubuntu 13.10 et vérifie que tu es bien dans le mode EFI en utilisant la méthode d'identification indiquée dans ce paragraphe 2.5 Identifier si l'ordinateur démarre sur le CD (ou la live USB) en mode EFI
et refais un Boot-Info depuis ta session live. Ce que je veux voir dans ce futur Boot-Info :
1) que tu as bien réussi à démarrer en mode EFI, ce qui me confirmera que tu es bien en mesure de faire une installation en mode EFI
2) que tu as bien la bonne version de Ubuntu (13.10 64 bits)

(*) les emmerdes du chiffrement : http://forum.ubuntu-fr.org/viewtopic.php?pid=14775071 (j'ai testé merci : il faut taper ta phrase (qui tient lieu de mot de passe) en Qwerty à cause de la conception daubique de cette usine à gaz. Si tu as pris une phrase bien longue, tu es obligé de te la "traduire" en Qwerty sur un bout de papier sinon c'est l'enfer pour se connecter)

Dernière modification par malbo (Le 24/01/2014, à 08:40)

Hors ligne

#8 Le 24/01/2014, à 08:45

claire barnouin

Re : [résolu] demarrage Unbutu

je suis dans le bios et je n'arrive pas a changer le mode;quand je met le dvd il demarre bien en non-efi (image du bas)
dans boot j'ai ceci: Boot configuration

<<<<<<<<<<<<<<<<< launch CSM  (enabled)
<<<<<<<<<<<<<<<<< launch PXE OPROM(disabled)
<<<<<<<<<<<<<<<<<Boot option priorités
<<<<<<<<<<<<<<<<<boot option#1        (P2 mashimato
<<<<<<<<<<<<<<<<<CD/DVDrom drive bbs priorités
<<<<<<<<<<<<<<<<<Delete boot option

Dernière modification par claire barnouin (Le 24/01/2014, à 08:55)

Hors ligne

#9 Le 24/01/2014, à 09:10

malbo

Re : [résolu] demarrage Unbutu

Essaie d'adopter le réglage et de procéder au démarrage comme expliqué dans ce post de lenigaud : http://forum.ubuntu-fr.org/viewtopic.ph … #p12374171
C'est à dire :
launch CSM  (enabled)
launch PXE OPROM  (enabled) <----à passer de "disabled" à "enabled"
Après cela, enfoncer la touche Echap pendant le démarrage de l'ordi et sélectionner le démarrage en UEFI sur le liveDVD (il doit apparaitre sous la forme "UEFI : le nom du modèle de ton lecteur de DVD" (ça ressemblerait à "UEFI : PIONEER DVD-RW etc..." dans le cas d'un lecteur de DVD de la marque PIONEER). Je ne suis pas certain que ça se présentera exactement sous la forme que je viens d'indiquer mais tu vas trouver à force d'acharnement. Si tu ne trouvais pas, il faudrait repasser l'option launch CSM (qui signifie lancer en mode non-EFI) en disabled afin que seul le mode EFI soit autorisé et du coup, le démarrage sur le liveDVD se ferait obligatoirement en mode EFI (mais il faudrait quand même enfoncer  la touche Echap au démarrage pour sélectionner le lecteur de DVD).

Dernière modification par malbo (Le 24/01/2014, à 09:18)

Hors ligne

#10 Le 24/01/2014, à 10:32

claire barnouin

Re : [résolu] demarrage Unbutu

apres la manip  le dvd démarre toujours en mode non efi, donc il faut que je remette lauchn sur disabled et recommmencer la procédure de lancement du dvd en passant par la touche échap.ais bien compris?

je viens de redémarrer avec le dvd version13.10 il démarre toujours en mode non efi!!!!

voici l'url du boot info:http://paste.ubuntu.com/6807627/

Dernière modification par claire barnouin (Le 24/01/2014, à 11:23)

Hors ligne

#11 Le 24/01/2014, à 12:28

malbo

Re : [résolu] demarrage Unbutu

Peut-être que j'ai mal décrit la manip au début du post #9. Regarde ce qui est détaillé par xnicolovici dans ce post : http://forum.ubuntu-fr.org/viewtopic.ph … #p12677111
Sa procédure est différente (j'ai mis en gras ce qui diffère par rapport à ce que j'avais proposé) : 
"La procédure est très simple, j'ai bloqué comme toi sur mon nouveau X75A équipé de Windows 8.

Allume ta machine, appuie sur la touche <ESC> pour accéder au BIOS (2ème option du menu qui s'affiche)

Dans la section <Boot>, il te faut activer le "Legacy BIOS" en mettant:

Launch CSM: enabled
    Launch PXE OpROM: enabled

Une fois ces deux options activées, sauvegarde les modifications et redémarre ton portable.

Appuie à nouveau sur <ESC> au démarrage et là, miracle, ton lecteur de DVD apparaît comme option possible de boot."

Il est possible que tu n'aies pas sauvegardé en quittant le "Bios" (il faut appuyer sur la touche F10 je crois pour quitter en enregistrant)

Dernière modification par malbo (Le 24/01/2014, à 12:30)

Hors ligne

#12 Le 24/01/2014, à 12:50

claire barnouin

Re : [résolu] demarrage Unbutu

j'ai fait ce que tu m'a demander puis-je installer ubuntu 13.10? dois je refaire un boot info?

Dernière modification par claire barnouin (Le 24/01/2014, à 12:51)

Hors ligne

#13 Le 24/01/2014, à 13:04

malbo

Re : [résolu] demarrage Unbutu

Arrives-tu enfin à démarrer en mode EFI (identification grâce à cette procédure) sur ton liveDVD ?
Si oui, tu peux installer.

Dernière modification par malbo (Le 24/01/2014, à 13:04)

Hors ligne

#14 Le 24/01/2014, à 16:14

claire barnouin

Re : [résolu] demarrage Unbutu

enfin ça marche!merci beaucoup à toi qui ma accompagné, tout je n'aurais pas osé çe que tu m'a fais tester dans le bios.Après une  xeme installation je crois qu'unbuntu cherchait à démarrer sur le lecteur de dvd,j'ai bidouillé dans le bios  fast boot desabled  enfin ça marche encore merci pour tout le temps que tu m'a consacré!

A+

Hors ligne

#15 Le 24/01/2014, à 16:27

malbo

Re : [résolu] demarrage Unbutu

Maintenant que tu as réussi, peux-tu poster ton Boot-Info* pour que ça puisse servir d'exemple à ceux qui ont le même modèle d'ordi que toi : un asus R900VB-YZ047H (tu t'es planté dans ce post, tu as écrit RB900...)

* je te prie de le faire depuis ta session du Ubuntu installé parce qu'on voit mieux le réglage de l'UEFI. C'est à dire que tu sautes l'étape 1 et tu attaques directement à l'étape 2

Dernière modification par malbo (Le 24/01/2014, à 16:31)

Hors ligne

#16 Le 25/01/2014, à 07:59

claire barnouin

Re : [résolu] demarrage Unbutu

boot info:  http://paste.ubuntu.com/6812778/
encore merci
A+
ps :j'ai corrigé la ref de l'ordi dans le post

Dernière modification par claire barnouin (Le 25/01/2014, à 08:19)

Hors ligne

#17 Le 25/01/2014, à 09:21

malbo

Re : [résolu] demarrage Unbutu

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector 
    2048 of the same hard drive for core.img, but core.img can not be found at 
    this location.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sda1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sda1 starts at sector 2048.
    Operating System:  
    Boot files:        /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.10 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 3000.6 GB, 3000592982016 bytes
255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 4,294,967,295 4,294,967,295  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       999,423       997,376 EFI System partition
/dev/sda2         999,424 2,572,447,743 2,571,448,320 Data partition (Linux)
/dev/sda3   2,572,447,744 2,639,306,751    66,859,008 Swap partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        47CB-D826                              vfat       
/dev/sda2        11cee59f-31a1-4b98-8618-ac1f7eba0b57   ext4       
/dev/sda3        500690f1-6213-4934-9d72-c5d745b3593a   swap       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw)
/dev/sda2        /                        ext4       (rw,errors=remount-ro)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  11cee59f-31a1-4b98-8618-ac1f7eba0b57
else
  search --no-floppy --fs-uuid --set=root 11cee59f-31a1-4b98-8618-ac1f7eba0b57
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-11cee59f-31a1-4b98-8618-ac1f7eba0b57' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  11cee59f-31a1-4b98-8618-ac1f7eba0b57
	else
	  search --no-floppy --fs-uuid --set=root 11cee59f-31a1-4b98-8618-ac1f7eba0b57
	fi
	linux	/boot/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=11cee59f-31a1-4b98-8618-ac1f7eba0b57 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-15-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-11cee59f-31a1-4b98-8618-ac1f7eba0b57' {
	menuentry 'Ubuntu, avec Linux 3.11.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-15-generic-advanced-11cee59f-31a1-4b98-8618-ac1f7eba0b57' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  11cee59f-31a1-4b98-8618-ac1f7eba0b57
		else
		  search --no-floppy --fs-uuid --set=root 11cee59f-31a1-4b98-8618-ac1f7eba0b57
		fi
		echo	'Chargement de Linux 3.11.0-15-generic…'
		linux	/boot/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=11cee59f-31a1-4b98-8618-ac1f7eba0b57 ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-15-generic
	}
	menuentry 'Ubuntu, avec Linux 3.11.0-15-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-15-generic-recovery-11cee59f-31a1-4b98-8618-ac1f7eba0b57' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  11cee59f-31a1-4b98-8618-ac1f7eba0b57
		else
		  search --no-floppy --fs-uuid --set=root 11cee59f-31a1-4b98-8618-ac1f7eba0b57
		fi
		echo	'Chargement de Linux 3.11.0-15-generic…'
		linux	/boot/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=11cee59f-31a1-4b98-8618-ac1f7eba0b57 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-15-generic
	}
	menuentry 'Ubuntu, avec Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-11cee59f-31a1-4b98-8618-ac1f7eba0b57' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  11cee59f-31a1-4b98-8618-ac1f7eba0b57
		else
		  search --no-floppy --fs-uuid --set=root 11cee59f-31a1-4b98-8618-ac1f7eba0b57
		fi
		echo	'Chargement de Linux 3.11.0-12-generic…'
		linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=11cee59f-31a1-4b98-8618-ac1f7eba0b57 ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
	menuentry 'Ubuntu, avec Linux 3.11.0-12-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-11cee59f-31a1-4b98-8618-ac1f7eba0b57' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  11cee59f-31a1-4b98-8618-ac1f7eba0b57
		else
		  search --no-floppy --fs-uuid --set=root 11cee59f-31a1-4b98-8618-ac1f7eba0b57
		fi
		echo	'Chargement de Linux 3.11.0-12-generic…'
		linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=11cee59f-31a1-4b98-8618-ac1f7eba0b57 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=11cee59f-31a1-4b98-8618-ac1f7eba0b57 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=47CB-D826  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=500690f1-6213-4934-9d72-c5d745b3593a none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


========= Devices which don't seem to have a corresponding hard drive: =========

sdb 

=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-R46AKq0u/Tmp_Log: No such file or directory

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-01-25__08h13 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 13.10, saucy, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=11cee59f-31a1-4b98-8618-ac1f7eba0b57 ro quiet splash vt.handoff=7

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 13.10 CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="47CB-D826" TYPE="vfat"
/dev/sda2: UUID="11cee59f-31a1-4b98-8618-ac1f7eba0b57" TYPE="ext4"
/dev/sda3: UUID="500690f1-6213-4934-9d72-c5d745b3593a" TYPE="swap"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root      4096 janv. 24 15:21 grub.d
total 72
-rwxr-xr-x 1 root root  7850 oct.  10 19:48 00_header
-rwxr-xr-x 1 root root  5949 août  15 10:26 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct.  10 19:48 10_linux
-rwxr-xr-x 1 root root 10258 oct.  10 19:48 20_linux_xen
-rwxr-xr-x 1 root root  1798 juin  17  2013 20_memtest86+
-rwxr-xr-x 1 root root 11531 oct.  10 19:48 30_os-prober
-rwxr-xr-x 1 root root  1426 oct.  10 19:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.  10 19:48 40_custom
-rwxr-xr-x 1 root root   216 oct.  10 19:48 41_custom
-rw-r--r-- 1 root root   483 oct.  10 19:48 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=47CB-D826   (sda1)

efibootmgr -v
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0001
Boot0000* ubuntu	HD(1,800,f3800,2b71269e-571f-4bc0-afe8-fea9cc62f67b)File(EFIubuntushimx64.efi)
Boot0001* ubuntu	HD(1,800,f3800,2b71269e-571f-4bc0-afe8-fea9cc62f67b)File(EFIUbuntugrubx64.efi)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST3000DM001-9YN1 (scsi)
Disk /dev/sda: 3001GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  512MB   511MB   fat32                 boot
2      512MB   2966GB  2966GB  ext4
3      2966GB  3001GB  34.2GB  linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:3001GB:scsi:512:4096:gpt:ATA ST3000DM001-9YN1;
1:1049kB:512MB:511MB:fat32::boot;
2:512MB:2966GB:2966GB:ext4::;
3:2966GB:3001GB:34.2GB:linux-swap(v1)::;


=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=sigaud)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 rts51x0 sda sda1 sda2 sda3 sdb sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control
ls /boot/efi/1:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 64 6f 73  66 73 00 00 02 08 20 00  |.X.mkdosfs.... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 38 0f 00 d0 03 00 00  00 00 00 00 02 00 00 00  |.8..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 01 29 26 d8 cb 47 4e  4f 20 4e 41 4d 45 20 20  |..)&..GNO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda2      ext4      2.7T  7.5G  2.6T   1% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs   16G   12K   16G   1% /dev
tmpfs          tmpfs     3.2G  1.2M  3.2G   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs      16G  156K   16G   1% /run/shm
none           tmpfs     100M   60K  100M   1% /run/user
/dev/sda1      vfat      487M  3.3M  483M   1% /boot/efi

=================== fdisk -l:

Disk /dev/sda: 3000.6 GB, 3000592982016 bytes
255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x61afbb41

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  4294967295  2147483647+  ee  GPT
Partition 1 does not start on physical sector boundary.


EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !

Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 13.10] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

=================== Default settings
Recommended-Repair
This setting would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

C'est parfait. C'est bizarre pour moi de voir une partition racine de Ubuntu qui fait quasiment 3 To (je me contente de 10 Go quand je n'ai pas beaucoup de place sur le disque dur). N'oublie pas de faire des sauvegarde régulières de tes documents sur un disque dur externe.

EDIT_1 : par curiosité : pourquoi as-tu viré Windows 8 de cette machine puisque tu l'as achetée préinstallé Windows 8 ?

EDIT_ 2 : j'ai ajouté le modèle R900VB-YZ047H dans la Liste des portables « Asus »
Pourrais-tu modifier le titre du premier message de chacune des 4 discussions que tu as créées pour ajouter  [Résolu] en tête du titre. Pour la présente discussion, ça donnera (si tu peux corriger au passage unbutu en Ubuntu, ça sera mieux):

[Résolu] demarrage unbutu

Faire la même chose pour les 3 autres discussions :
http://forum.ubuntu-fr.org/viewtopic.php?id=1481861
http://forum.ubuntu-fr.org/viewtopic.php?id=1481121
http://forum.ubuntu-fr.org/viewtopic.php?id=1479641

Dernière modification par malbo (Le 25/01/2014, à 11:21)

Hors ligne

#18 Le 27/01/2014, à 14:51

claire barnouin

Re : [résolu] demarrage Unbutu

Bonjour,j'ai fait ce que tu m'a demandé(résolu) dans mes messages.Qu'entend tu par "disque racine Ubuntu 3 to"  quant au choix d'écraser w8,cela ma paru ,de prime abord, plus facile d'installer Ubuntu seul plutot quant dual boot!
J'ai par précaution créer une clé usb de recupération!

Hors ligne

#19 Le 27/01/2014, à 16:22

malbo

Re : [résolu] demarrage Unbutu

claire barnouin a écrit :

Qu'entend tu par "disque racine Ubuntu 3 to"

J'ai écrit "partition racine". Il y a des explications ici. On peut y lire : "La racine est une partition que vous définissez comme étant la base du stockage de vos fichiers.". Moi je dirais que c'est approximativement le C: de Windows.

claire barnouin a écrit :

quant au choix d'écraser w8,cela ma paru ,de prime abord, plus facile d'installer Ubuntu seul plutot quant dual boot!
J'ai par précaution créer une clé usb de recupération!

C'est sans doute plus facile. Je trouve que c'est brutal de virer Windows 8 d'emblée mais si tu as pris des dispositions pour pouvoir le réinstaller un jour avec ta clé USB, tu as très bien fait.

Hors ligne