Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 29/03/2014, à 23:04

Toctoc42

Impossible d'accéder à windows

Bonjour,

J'ai un soucis avec windows depuis que j'ai réinstaller ubuntu 13.10.
Je m'explique, je suis sous ubuntu depuis 2 ans, (je suis encore relativement novice) et j'ai découvert cubuntu 14.04, j'ai trouvé le principe plutot sympa alors j'ai installé la distribution à la place d'ubuntu.
Grand mal m'en a pris car cubuntu était assez instable chez moi, pas mal de bug, changement de bureau difficile et surtout perte de l'accès à windows depuis le grub.
Du coup j'ai réinstallé ubuntu 13.10 pensant revenir à la normale, mais rien.

Maintenant, je retrouve la possibilité d'accéder à windows depuis le grub mais quand je sélectionne la ligne, rien ne se passe, juste un écran noir et windows ne charge pas.
Je peut accéder à ubuntu sans problème et lorsque j'essaie d'accéder à mes fichiers dans windows (dossier "OS") j'ai ce message d'erreur suivant :

Error mounting /dev/sda3 at /media/toctoc42/OS: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda3" "/media/toctoc42/OS"' exited with non-zero exit status 13: MFT is corrupt, cannot read its unmapped extent record 20
Note : chkdsk cannot fix this, try ntfsfix
Inode is corrupt (0): Input/output error
Failed to load runlist for $MFT/$DATA.
highest_vcn = 0x3, last_vcn - 1 = 0x1a1ff
Failed to load $MFT: Input/output error
Failed to mount '/dev/sda3': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

Voila, j'avoue être perdu, d'autant que je n'ai plus accès à mes fichiers sur windows, donc je lance un petit appel à l'aide :s

Par avance merci,

Dernière modification par Toctoc42 (Le 30/03/2014, à 11:21)

Hors ligne

#2 Le 30/03/2014, à 00:23

Sibe

Re : Impossible d'accéder à windows

Cubuntu n'est pas une version officielle, elle a été conçu par des amateurs !

Voici les principaux dérivés officiels d'Ubuntu, tu dois prendre dans cette liste :

- Ubuntu (Unity)
- Ubuntu Serveur (pas d'environnement)
- Kubuntu (KDE)
- Xubuntu (XFCE)
- Lubuntu (LXDE)
- Ubuntu Gnome (Gnome3)

Les distribs comme "Cubuntu" ou "Voyager" etc... sont a éviter.


Il existe aussi une distribution qui a du succès en ce moment et qui est pas mal : Linux Mint

Dernière modification par Sibe (Le 30/03/2014, à 00:25)

Pc port1: Core i7 2.4GHz | 16 Go ram | GeForce 650m GT | SSD 256 Go + 1 To HD + 5 To en EXT | Linux Mint 17 x64 (Cinnamon)
Pc port2 (old): Core2duo 2.2GHz | 4 Go ram | GeForce 9600m GT | 500 Go HD | Xubuntu 14.04 x64 (Xfce)
Pc bur famille: Core2duo 3.2GHz | 4Go ram | GeForce 405 | 1 To HD | Debian 7 x64 (Kde)
Pc bur trav: Core i5 | 4 Go ram | GeForce 7600 GS | 250 Go HD | Debian 7 x64 (Mate)

Hors ligne

#3 Le 30/03/2014, à 07:24

Toctoc42

Re : Impossible d'accéder à windows

Oui, je suis pas près de l'oublier, merci pour les précisions.

j'en profite pour un petit up sur mon "non-accès" à windows ^^

Hors ligne

#4 Le 30/03/2014, à 07:50

malbo

Re : Impossible d'accéder à windows

Depuis ta session Ubuntu installée sur disque dur, je te prie de faire un Boot-Info. Tu sauteras l'étape 1 et tu attaqueras directement à l'étape 2.

Hors ligne

#5 Le 30/03/2014, à 10:37

Toctoc42

Re : Impossible d'accéder à windows

Bonjour,

Je viens d'effectuer le boot-info.
J'ai ce résultat : http://paste.ubuntu.com/7178342/
(J'ai copié le lien car sinon c'était très long, et je n'aurais pas su sélectionner les parties les plus pertinentes.

Hors ligne

#6 Le 30/03/2014, à 10:55

malbo

Re : Impossible d'accéder à windows

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7/2008: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi 
                       /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/HP/SystemDiags/CryptRSA.efi 
                       /EFI/HP/SystemDiags/CryptRSA32.efi 
                       /EFI/HP/SystemDiags/SystemDiags.efi 
                       /EFI/HP/SystemDiags/SystemDiags32.efi 
                       /EFI/Microsoft/Boot/bkpbootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/bootx64.efi 
                       /EFI/Microsoft/Boot/memtest.efi

sda2: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sda3: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Mounting failed:   mount: unknown filesystem type ''
MFT is corrupt, cannot read its unmapped extent record 20
Note : chkdsk cannot fix this, try ntfsfix
Inode is corrupt (0): Input/output error
Failed to load runlist for $MFT/$DATA.
highest_vcn = 0x3, last_vcn - 1 = 0x1a1ff
Failed to load $MFT: Input/output error
Failed to mount '/dev/sda3': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
MFT is corrupt, cannot read its unmapped extent record 20
Note : chkdsk cannot fix this, try ntfsfix
Inode is corrupt (0): Input/output error
Failed to load runlist for $MFT/$DATA.
highest_vcn = 0x3, last_vcn - 1 = 0x1a1ff
Failed to load $MFT: Input/output error
Failed to mount '/dev/sda3': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v1.99-2.00) is installed in the boot sector of 
                       sda4 and looks at sector 1759917584 of the same hard 
                       drive for core.img, but core.img can not be found at 
                       this location. No errors found in the Boot Parameter 
                       Block.
    Operating System:  
    Boot files:        /boot/bcd

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda6: __________________________________________________________________________

    File system:       BIOS Boot partition
    Boot sector type:  Grub2's core.img
    Boot sector info: 

sda7: __________________________________________________________________________

    File system:       ext3
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v1.99) is installed in the boot sector of sda7 
                       and looks at sector 1783171304 of the same hard drive 
                       for core.img. core.img is at this location and looks 
                       in partition 94 for .
    Operating System:  Ubuntu 13.10 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       206,847       204,800 EFI System partition
/dev/sda2         206,848       468,991       262,144 Microsoft Reserved Partition (Windows)
/dev/sda3         468,992 1,679,555,264 1,679,086,273 Data partition (Windows/Linux)
/dev/sda4   1,918,091,264 1,953,523,711    35,432,448 EFI System partition
/dev/sda5   1,913,995,264 1,918,091,263     4,096,000 Swap partition (Linux)
/dev/sda6   1,679,556,608 1,679,558,655         2,048 BIOS Boot partition
/dev/sda7   1,679,558,656 1,913,995,263   234,436,608 Data partition (Windows/Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        D8B1-316D                              vfat       SYSTEM
/dev/sda3        1A827C3C827C1F07                       ntfs       OS
/dev/sda4        5A3804BB380497E1                       ntfs       HP_RECOVERY
/dev/sda5        5a5341c0-e193-4698-8530-2842c4c6b8f4   swap       
/dev/sda7        f880710f-e282-4539-bf4c-b71ed067a12b   ext3       

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw)
/dev/sda7        /                        ext3       (rw,errors=remount-ro)


=========================== sda7/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  f880710f-e282-4539-bf4c-b71ed067a12b
else
  search --no-floppy --fs-uuid --set=root f880710f-e282-4539-bf4c-b71ed067a12b
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f880710f-e282-4539-bf4c-b71ed067a12b' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt7'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  f880710f-e282-4539-bf4c-b71ed067a12b
	else
	  search --no-floppy --fs-uuid --set=root f880710f-e282-4539-bf4c-b71ed067a12b
	fi
	linux	/boot/vmlinuz-3.11.0-18-generic root=UUID=f880710f-e282-4539-bf4c-b71ed067a12b ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-18-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-f880710f-e282-4539-bf4c-b71ed067a12b' {
	menuentry 'Ubuntu, avec Linux 3.11.0-18-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-18-generic-advanced-f880710f-e282-4539-bf4c-b71ed067a12b' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt7'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  f880710f-e282-4539-bf4c-b71ed067a12b
		else
		  search --no-floppy --fs-uuid --set=root f880710f-e282-4539-bf4c-b71ed067a12b
		fi
		echo	'Chargement de Linux 3.11.0-18-generic…'
		linux	/boot/vmlinuz-3.11.0-18-generic root=UUID=f880710f-e282-4539-bf4c-b71ed067a12b ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-18-generic
	}
	menuentry 'Ubuntu, avec Linux 3.11.0-18-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-18-generic-recovery-f880710f-e282-4539-bf4c-b71ed067a12b' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt7'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  f880710f-e282-4539-bf4c-b71ed067a12b
		else
		  search --no-floppy --fs-uuid --set=root f880710f-e282-4539-bf4c-b71ed067a12b
		fi
		echo	'Chargement de Linux 3.11.0-18-generic…'
		linux	/boot/vmlinuz-3.11.0-18-generic root=UUID=f880710f-e282-4539-bf4c-b71ed067a12b ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-18-generic
	}
	menuentry 'Ubuntu, avec Linux 3.11.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-advanced-f880710f-e282-4539-bf4c-b71ed067a12b' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt7'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  f880710f-e282-4539-bf4c-b71ed067a12b
		else
		  search --no-floppy --fs-uuid --set=root f880710f-e282-4539-bf4c-b71ed067a12b
		fi
		echo	'Chargement de Linux 3.11.0-12-generic…'
		linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=f880710f-e282-4539-bf4c-b71ed067a12b ro   quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
	menuentry 'Ubuntu, avec Linux 3.11.0-12-generic (mode de dépannage)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-12-generic-recovery-f880710f-e282-4539-bf4c-b71ed067a12b' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt7'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7  f880710f-e282-4539-bf4c-b71ed067a12b
		else
		  search --no-floppy --fs-uuid --set=root f880710f-e282-4539-bf4c-b71ed067a12b
		fi
		echo	'Chargement de Linux 3.11.0-12-generic…'
		linux	/boot/vmlinuz-3.11.0-12-generic root=UUID=f880710f-e282-4539-bf4c-b71ed067a12b ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.11.0-12-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "Windows UEFI bkpbootmgfw.efi" {
search --fs-uuid --no-floppy --set=root D8B1-316D
chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi
}

menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root D8B1-316D
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}

menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root D8B1-316D
chainloader (${root})/EFI/ubuntu/MokManager.efi
}

menuentry "EFI/HP/SystemDiags/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root D8B1-316D
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA32.efi
}

menuentry "EFI/HP/SystemDiags/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root D8B1-316D
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA.efi
}

menuentry "EFI/HP/SystemDiags/SystemDiags32.efi" {
search --fs-uuid --no-floppy --set=root D8B1-316D
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags32.efi
}

menuentry "EFI/HP/SystemDiags/SystemDiags.efi" {
search --fs-uuid --no-floppy --set=root D8B1-316D
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags.efi
}

menuentry "EFI/boot/bootx64.efi" {
search --fs-uuid --no-floppy --set=root 5A3804BB380497E1
chainloader (${root})/EFI/boot/bootx64.efi
}

menuentry "EFI/boot/bootx64.efi.efi" {
search --fs-uuid --no-floppy --set=root 5A3804BB380497E1
chainloader (${root})/EFI/boot/bootx64.efi.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Boot Manager (UEFI on /dev/sda1)" --class windows --class os {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  D8B1-316D
	else
	  search --no-floppy --fs-uuid --set=root D8B1-316D
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda7/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda7 during installation
UUID=f880710f-e282-4539-bf4c-b71ed067a12b /               ext3    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=5a5341c0-e193-4698-8530-2842c4c6b8f4 none            swap    sw              0       0
UUID=D8B1-316D	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda7: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


========= Devices which don't seem to have a corresponding hard drive: =========

sdb 

=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-Wvkk41kS/Tmp_Log: No such file or directory

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-03-30__10h34 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in installed-session (Ubuntu 13.10, saucy, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=f880710f-e282-4539-bf4c-b71ed067a12b ro quiet splash vt.handoff=7
MFT is corrupt, cannot read its unmapped extent record 20
Note : chkdsk cannot fix this, try ntfsfix
Inode is corrupt (0): Erreur d'entrée/sortie
Failed to load runlist for $MFT/$DATA.
highest_vcn = 0x3, last_vcn - 1 = 0x1a1ff
Failed to load $MFT: Erreur d'entrée/sortie
Failed to mount '/dev/sda3': Erreur d'entrée/sortie
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda3 : Error code 13
mount -r /dev/sda3 /mnt/boot-sav/sda3
MFT is corrupt, cannot read its unmapped extent record 20
Note : chkdsk cannot fix this, try ntfsfix
Inode is corrupt (0): Erreur d'entrée/sortie
Failed to load runlist for $MFT/$DATA.
highest_vcn = 0x3, last_vcn - 1 = 0x1a1ff
Failed to load $MFT: Erreur d'entrée/sortie
Failed to mount '/dev/sda3': Erreur d'entrée/sortie
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount -r /dev/sda3 : Error code 13

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda7:L'OS actuellement utilisé - Ubuntu 13.10 CurrentSession:linux
/dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi

=================== blkid:
/dev/sda1: LABEL="SYSTEM" UUID="D8B1-316D" TYPE="vfat"
/dev/sda3: LABEL="OS" UUID="1A827C3C827C1F07" TYPE="ntfs"
/dev/sda4: LABEL="HP_RECOVERY" UUID="5A3804BB380497E1" TYPE="ntfs"
/dev/sda5: UUID="5a5341c0-e193-4698-8530-2842c4c6b8f4" TYPE="swap"
/dev/sda7: UUID="f880710f-e282-4539-bf4c-b71ed067a12b" TYPE="ext3"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

MFT is corrupt, cannot read its unmapped extent record 20
Note : chkdsk cannot fix this, try ntfsfix
Inode is corrupt (0): Erreur d'entrée/sortie
Failed to load runlist for $MFT/$DATA.
highest_vcn = 0x3, last_vcn - 1 = 0x1a1ff
Failed to load $MFT: Erreur d'entrée/sortie
Failed to mount '/dev/sda3': Erreur d'entrée/sortie
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount /dev/sda3 : Error code 13
mount -r /dev/sda3 /mnt/boot-sav/sda3
MFT is corrupt, cannot read its unmapped extent record 20
Note : chkdsk cannot fix this, try ntfsfix
Inode is corrupt (0): Erreur d'entrée/sortie
Failed to load runlist for $MFT/$DATA.
highest_vcn = 0x3, last_vcn - 1 = 0x1a1ff
Failed to load $MFT: Erreur d'entrée/sortie
Failed to mount '/dev/sda3': Erreur d'entrée/sortie
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
mount -r /dev/sda3 : Error code 13

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 mars  29 21:40 grub.d
drwxr-xr-x  2 root root     4096 mars  29 21:38 grub.d.bak
total 72
-rwxr-xr-x 1 root root  7850 oct.  23 22:44 00_header
-rwxr-xr-x 1 root root  5949 août  15  2013 05_debian_theme
-rwxr-xr-x 1 root root 11479 oct.  23 22:44 10_linux
-rwxr-xr-x 1 root root 10258 oct.  23 22:44 20_linux_xen
-rwxr-xr-x 1 root root  1377 mars  29 21:40 25_custom
-rwxr-xr-x 1 root root 11531 oct.  23 22:44 30_os-prober
-rwxr-xr-x 1 root root  1426 oct.  23 22:44 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct.  23 22:44 40_custom
-rwxr-xr-x 1 root root   216 oct.  23 22:44 41_custom
-rw-r--r-- 1 root root   483 oct.  23 22:44 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda7: UUID=D8B1-316D	 (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bkpbootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
Presence of .bkp file detected: /boot/efi/EFI/Boot/bkpbootx64.efi
Presence of .bkp file detected: /boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda4/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda4/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda4/EFI/Boot/bootx64.efi

efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0002,0000,0001,0003,0004,0007,0006,0005,0008
Boot0000* Windows Boot Manager	HD(1,800,32000,9b83232b-ad13-49b4-97c0-cfd995d7355f)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...3................
Boot0001* USB Floppy/CD	Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive	Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0003* ubuntu	HD(1,800,32000,9b83232b-ad13-49b4-97c0-cfd995d7355f)File(EFIubuntugrubx64.efi)
Boot0004* ATAPI CD-ROM Drive	Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0300000001)AMBO
Boot0005* CD/DVD Drive 	BIOS(3,0,00)AMGOAMNO........o.h.p. . . . . . .D.V.D.-.R.A.M. .S.W.8.1.0....................A...........................>..Gd-.;.A..MQ..L.2.1.5.1.P.T.6.0.7.8.2.5.S.T.2.H. .H. . ......AMBO
Boot0006* USB Floppy/CD	Vendor(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0007* Hard Drive	BIOS(2,0,00)AMGOAMNO........g.S.A.M.S.U.N.G. .H.M.3.2.0.J.I....................A.............................4..Gd-.;.A..MQ..L.S.A.M.S.U.N.G. .H.M.3.2.0.J.I......AMBOAMNO........o.H.i.t.a.c.h.i. .H.D.S.7.2.1.0.1.0.D.L.E.6.3.0....................A...........................>..Gd-.;.A..MQ..L. . . . . . .S.M.5.K.1.2.H.5.1.2.E.0.G.9......AMBO
Boot0008* Realtek PXE B03 D00	BIOS(6,0,00)AMBO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda7	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.
sda3	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda3.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.

sda	: GPT,	BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA Hitachi HDS72101 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  106MB   105MB   fat32           EFI   boot
2      106MB   240MB   134MB                   Micr  msftres
3      240MB   860GB   860GB   ntfs                  msftdata
6      860GB   860GB   1049kB                        bios_grub
7      860GB   980GB   120GB   ext3                  msftdata
5      980GB   982GB   2097MB  linux-swap(v1)
4      982GB   1000GB  18.1GB  ntfs            Basi  boot

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA Hitachi HDS72101;
1:1049kB:106MB:105MB:fat32:EFI :boot;
2:106MB:240MB:134MB::Micr:msftres;
3:240MB:860GB:860GB:ntfs::msftdata;
6:860GB:860GB:1049kB:::bios_grub;
7:860GB:980GB:120GB:ext3::msftdata;
5:980GB:982GB:2097MB:linux-swap(v1)::;
4:982GB:1000GB:18.1GB:ntfs:Basi:boot;


=================== mount:
/dev/sda7 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=toctoc42)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fb1 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sdb sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vga_arbiter vhost-net zero
ls /dev/mapper:  control
ls /boot/efi/1:
ls /boot/efi: EFI
HP_TOOLS
SYSTEM
Temp  . Veuillez indiquer ce message à boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 02 fe 19  |.X.MSDOS5.0.....|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 20 03 00 01 03 00 00  00 00 00 00 02 00 00 00  |. ..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 6d 31 b1 d8 4e  4f 20 4e 41 4d 45 20 20  |..)m1..NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 4e 02 8a 56 40 b4 41  |{......|.N..V@.A|
00000070  bb aa 55 cd 13 72 10 81  fb 55 aa 75 0a f6 c1 01  |..U..r...U.u....|
00000080  74 05 fe 46 02 eb 2d 8a  56 40 b4 08 cd 13 73 05  |t..F..-.V@....s.|
00000090  b9 ff ff 8a f1 66 0f b6  c6 40 66 0f b6 d1 80 e2  |.....f...@f.....|
000000a0  3f f7 e2 86 cd c0 ed 06  41 66 0f b7 c9 66 f7 e1  |?.......Af...f..|
000000b0  66 89 46 f8 83 7e 16 00  75 38 83 7e 2a 00 77 32  |f.F..~..u8.~*.w2|
000000c0  66 8b 46 1c 66 83 c0 0c  bb 00 80 b9 01 00 e8 2b  |f.F.f..........+|
000000d0  00 e9 2c 03 a0 fa 7d b4  7d 8b f0 ac 84 c0 74 17  |..,...}.}.....t.|
000000e0  3c ff 74 09 b4 0e bb 07  00 cd 10 eb ee a0 fb 7d  |<.t............}|
000000f0  eb e5 a0 f9 7d eb e0 98  cd 16 cd 19 66 60 80 7e  |....}.......f`.~|
00000100  02 00 0f 84 20 00 66 6a  00 66 50 06 53 66 68 10  |.... .fj.fP.Sfh.|
00000110  00 01 00 b4 42 8a 56 40  8b f4 cd 13 66 58 66 58  |....B.V@....fXfX|
00000120  66 58 66 58 eb 33 66 3b  46 f8 72 03 f9 eb 2a 66  |fXfX.3f;F.r...*f|
00000130  33 d2 66 0f b7 4e 18 66  f7 f1 fe c2 8a ca 66 8b  |3.f..N.f......f.|
00000140  d0 66 c1 ea 10 f7 76 1a  86 d6 8a 56 40 8a e8 c0  |.f....v....V@...|
00000150  e4 06 0a cc b8 01 02 cd  13 66 61 0f 82 75 ff 81  |.........fa..u..|
00000160  c3 00 02 66 40 49 75 94  c3 42 4f 4f 54 4d 47 52  |...f@Iu..BOOTMGR|
00000170  20 20 20 20 00 00 00 00  00 00 00 00 00 00 00 00  |    ............|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 52 65  |..............Re|
000001b0  6d 6f 76 65 20 64 69 73  6b 73 20 6f 72 20 6f 74  |move disks or ot|
000001c0  68 65 72 20 6d 65 64 69  61 2e ff 0d 0a 44 69 73  |her media....Dis|
000001d0  6b 20 65 72 72 6f 72 ff  0d 0a 50 72 65 73 73 20  |k error...Press |
000001e0  61 6e 79 20 6b 65 79 20  74 6f 20 72 65 73 74 61  |any key to resta|
000001f0  72 74 0d 0a 00 00 00 00  00 ac cb d8 00 00 55 aa  |rt............U.|
00000200

=================== hexdump -n512 -C /dev/sda3
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 28 07 00  |........?....(..|
00000020  00 00 00 00 80 00 80 00  c0 d2 14 64 00 00 00 00  |...........d....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  07 1f 7c 82 3c 7c 82 1a  |..........|.<|..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200
ls /mnt/boot-sav/sda4/1:
ls /mnt/boot-sav/sda4: boot
bootmgr.efi
boot-sav
BT_HP.FLG
CSP.DAT
DeployRp.log
efi
EFI
hp
HPSF_Rep.txt
HP_WSD.dat
language.ini
msdia80.dll
preload
Recovery
$RECYCLE.BIN
RPCONFIG.LOG
System Volume Information  . Veuillez indiquer ce message à boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sda4
00000000  eb 63 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.c.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 c0 53 72  |........?.....Sr|
00000020  00 00 00 00 80 00 80 00  ff a7 1c 02 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  e1 97 04 38 bb 04 38 5a  |...........8..8Z|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 80 10 36 e6 68  |.....3.......6.h|
00000060  00 00 00 00 ff fa 90 90  f6 c2 80 74 05 f6 c2 70  |...........t...p|
00000070  74 02 b2 80 ea 79 7c 00  00 31 c0 8e d8 8e d0 bc  |t....y|..1......|
00000080  00 20 fb a0 64 7c 3c ff  74 02 88 c2 52 bb 17 04  |. ..d|<.t...R...|
00000090  80 27 03 74 06 be 88 7d  e8 17 01 be 05 7c b4 41  |.'.t...}.....|.A|
000000a0  bb aa 55 cd 13 5a 52 72  3d 81 fb 55 aa 75 37 83  |..U..ZRr=..U.u7.|
000000b0  e1 01 74 32 31 c0 89 44  04 40 88 44 ff 89 44 02  |..t21..D.@.D..D.|
000000c0  c7 04 10 00 66 8b 1e 5c  7c 66 89 5c 08 66 8b 1e  |....f..|f..f..|
000000d0  60 7c 66 89 5c 0c c7 44  06 00 70 b4 42 cd 13 72  |`|f...D..p.B..r|
000000e0  05 bb 00 70 eb 76 b4 08  cd 13 73 0d f6 c2 80 0f  |...p.v....s.....|
000000f0  84 d0 00 be 93 7d e9 82  00 66 0f b6 c6 88 64 ff  |.....}...f....d.|
00000100  40 66 89 44 04 0f b6 d1  c1 e2 02 88 e8 88 f4 40  |@f.D...........@|
00000110  89 44 08 0f b6 c2 c0 e8  02 66 89 04 66 a1 60 7c  |.D.......f..f.`||
00000120  66 09 c0 75 4e 66 a1 5c  7c 66 31 d2 66 f7 34 88  |f..uNf.|f1.f.4.|
00000130  d1 31 d2 66 f7 74 04 3b  44 08 7d 37 fe c1 88 c5  |.1.f.t.;D.}7....|
00000140  30 c0 c1 e8 02 08 c1 88  d0 5a 88 c6 bb 00 70 8e  |0........Z....p.|
00000150  c3 31 db b8 01 02 cd 13  72 1e 8c c3 60 1e b9 00  |.1......r...`...|
00000160  01 8e db 31 f6 bf 00 80  8e c6 fc f3 a5 1f 61 ff  |...1..........a.|
00000170  26 5a 7c be 8e 7d eb 03  be 9d 7d e8 34 00 be a2  |&Z|..}....}.4...|
00000180  7d e8 2e 00 cd 18 eb fe  47 52 55 42 20 00 47 65  |}.......GRUB .Ge|
00000190  6f 6d 00 48 61 72 64 20  44 69 73 6b 00 52 65 61  |om.Hard Disk.Rea|
000001a0  64 00 20 45 72 72 6f 72  0d 0a 00 bb 01 00 b4 0e  |d. Error........|
000001b0  cd 10 ac 3c 00 75 f4 c3  73 73 69 6e 67 00 0d 0a  |...<.u..ssing...|
000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/sda7      ext3      111G  6.2G   99G   6% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     384M  1.2M  383M   1% /run
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.9G  156K  1.9G   1% /run/shm
none           tmpfs     100M   32K  100M   1% /run/user
/dev/sda1      vfat       96M   27M   70M  28% /boot/efi
/dev/sda4      fuseblk    17G   15G  2.2G  88% /mnt/boot-sav/sda4

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xd60645a7

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.


EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !

Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 13.10] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

Vous souhaiterez peut-être ré-essayer après avoir activé l'option [Sauvegarder et renommer les fichiers EFI Windows].

=================== Default settings
Recommended-Repair
This setting would purge (in order to sign-grub) and reinstall the grub-efi-amd64-signed of sda7, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s repair-filesystems

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Aucun changement n'a été effectué sur cet ordinateur.

Effectivement, la partition Windows (sda3) est bien malade. Je ne sais pas t'aider à réparer cela mais peut-être que ça peut inspirer quelqu'un qui saura te guider.
En parallèle, je viens de retrouver ce post : http://forum.ubuntu-fr.org/viewtopic.ph … #p15890101
dans lequel j'ai vérifié (et ça a été confirmé par ek0892 - le concepteur de Cubuntu - comme on peut voir ici) que Cubuntu n'est pas installable en mode EFI. Je pense comme Sibe que tu n'aurais vraiment pas dû t'embarquer avec cette distribution Cubuntu...
Et quand je relis le titre que tu as donné à la présente discussion "Impossible d'accéder à windows après installation ubuntu 13.10", je te trouve un peu gonflé d'écrire ça en titre - qui laisse croire que Ubuntu 13.10 a cassé du Windows - alors que pour le coup, c'est la daube Cubuntu 14.04 qui a pourri ton Windows.

Dernière modification par malbo (Le 30/03/2014, à 11:03)

Hors ligne

#7 Le 30/03/2014, à 11:20

Toctoc42

Re : Impossible d'accéder à windows

En effet, le titre fait un peu raccourci, d'autant que je n'ai jamais eu de soucis avec Ubuntu. Désolé pour cette méprise, ce n'était pas ce que je souhaitais dire.

Je vais continuer de chercher, d'autant que c'est curieux, j'ai pu utiliser le dual-boot Cubuntu/wind 7. plusieurs jours avant que je ne me trouve confronté à ce problème.
Merci pour ton attention.

Au pire j'utiliserais testdisk pour sauver mes données et je réinstallerais tout au propre si je retrouve mon cd windows, mais je préfèrerais éviter.

Dernière modification par Toctoc42 (Le 30/03/2014, à 11:20)

Hors ligne

Pages : 1