Ubuntu-fr

patlas

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Salut,
j'essaie easycam,  => il me manque quelque chose mais je ne suis pas un initié
d'avance merci pour un petit conseil 

  Bus 001 Device 004: ID 0c45:6028 Microdia
ensuite :

Password:
patrick@ubuntu:~$ lauchcam
- using device default
- using device default
mknod: `/dev/video0': Le fichier existe.
mknod: `/dev/video1': Le fichier existe.
ln: `/dev/video': fichier existant.
ln: `/lib/modules/2.6.12-10-686-smp/build/linux-headers-2.6.12-10-686-smp': fichier existant.
make: *** Pas de règle pour fabriquer la cible « clean ». Arrêt.
   Building SPCA5XX driver for 2.5/2.6 kernel.
   Remember: you must have read/write access to your kernel source tree.
make -C /lib/modules/`uname -r`/build SUBDIRS=/usr/share/EasyCam/drivers/spca CC=cc modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.12-10-686-smp »  Building modules, stage 2.
  MODPOST
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.12-10-686-smp »
mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca50x.ko
rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/et61x.ko
install -c -m 0644 spca5xx.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/
/sbin/depmod -ae

et puis c'est tout, que veut-il?

---

pc 3800 amd 64 1go ram : bubuntu
pc Dell précision 2600 512 mb  : Bubuntu
portable MSI VR600 64 : bubuntu et IBM T23 PIII : opengeu (e17)
tout en un BROTHER DCP-560-CN

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

un 'sudo modprobe -f spca5xx'

---

"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

patlas

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Merci Anbreizh,

Je suis certain maintenant que c'est une webcam de très bas de game

---

pc 3800 amd 64 1go ram : bubuntu
pc Dell précision 2600 512 mb  : Bubuntu
portable MSI VR600 64 : bubuntu et IBM T23 PIII : opengeu (e17)
tout en un BROTHER DCP-560-CN

geantick

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Ce drivers me pose probleme, veux que je regarde ca !
Pour le modules quickcam, je vais regarder !

à moi aussi mais je garde espoire et confiance

---

soit A=B , si l'on ajoute A de chaque cotés => 2A=B+A , on soustrait 2B de chaque coté => 2A-2B=A-B  <=> 2(A-B)=1(A-B)
en simplifiant 2=1 ! et voilà. Mais 0/0 çà fait combien?

cosmikbandito

Re : [Clos] Centralisation Probleme Webcam+EasyCam

slt

j'éssai d'installer une maxcam plus

Bus 002 Device 002: ID 05a9:8519 OmniVision Technologies, Inc.

Sur mon pc j'avais réussi a l'installer avec la version 1.35 d'easy cam

la j"utilise easycam 2

Résultat de la commande lauchcam

mknod: `/dev/video0': Le fichier existe.
mknod: `/dev/video1': Le fichier existe.
ln: `/dev/video': fichier existant.
ln: `/lib/modules/2.6.12-10-k7/build/linux-headers-2.6.12-10-k7': fichier existant.
make: *** Pas de règle pour fabriquer la cible « clean ». Arrêt.
make -C /lib/modules/2.6.12-10-k7/build M=/usr/share/EasyCam/drivers/ov519 modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.12-10-k7 »
  Building modules, stage 2.
  MODPOST
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.12-10-k7 »
make -C /lib/modules/2.6.12-10-k7/build M=/usr/share/EasyCam/drivers/ov519 modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.12-10-k7 »
  Building modules, stage 2.
  MODPOST
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.12-10-k7 »
make -C /lib/modules/2.6.12-10-k7/build M=/usr/share/EasyCam/drivers/ov519 modules_install
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.12-10-k7 »
  INSTALL /usr/share/EasyCam/drivers/ov519/ov511_decomp.ko
  INSTALL /usr/share/EasyCam/drivers/ov519/ov518_decomp.ko
  INSTALL /usr/share/EasyCam/drivers/ov519/ov51x.ko
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.12-10-k7 »
FATAL: Module ov519 not found.

un lsmod | grep ov519 ne revoi rien

merci pour votre aide

Dernière modification par cosmikbandito (Le 16/01/2006, à 22:59)

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

IL faut faire un 'sudo modprobe ov51x ov511_decomp' je pense

---

"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

cosmikbandito

Re : [Clos] Centralisation Probleme Webcam+EasyCam

jai deja fais un sudo modprobe ov51x ov511_decomp ov519 ou ov519_decomp
il me renvoi invariablement pour tous mes essais

FATAL: Module (nom du module) not found.

jlv

Re : [Clos] Centralisation Probleme Webcam+EasyCam

j'ai installé easy cam 2 mais je ne le vois pas dans les Applications!!!

Isaric

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Cliques dans -->Système-->Administration-->EasyCam

---

"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

guibis

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Bonsoir
et oui je suis désolé mais revoilà un autre newbie qui des pb pour installer sa web cam.... Cela fait pas mal de temps que j'essaye, et rien à faire. La quickcam messenger, il n'en va pas...

premier problème: le gcc et le kernel qui ne sont pas de la même version, oui on peut faire un exportcc=gcc3.4

mais rien à faire.

De plus il me dit qu'il y a pas de kernel header, alors que sous synaptic, il est présent et téléchargé....

Bon j'avoue que je tourne en rond, et avec easycam2 c'est pareil aussi. Je n'arrive même pas à installer les bons modules de librairie. pour la bibliothèque graphique de gnome...

Please
AIDEZ MOI
HELP ME
HILFT MIR
POMOC MI

je ne suis pas au bord de la dépression mais bon on m'offre une caméra, et je ne peux la faire fonctionner... AIE AIE AIE

lorsque je fais lauchcam, j'ai

massotjoseph@ubuntu:~$ sudo -s
Password:
root@ubuntu:~# launchcam
bash: launchcam: command not found
root@ubuntu:~# lauchcam
Traceback (most recent call last):
  File "/usr/share/EasyCam/easycam.py", line 25, in ?
    import gnome.ui
ImportError: No module named gnome.ui
root@ubuntu:~#

Je peux le trouver où ce module gnome.ui ????

Dernière modification par youp (Le 17/01/2006, à 22:17)

---

Si linux vous prend trop la tête  youp vous fait sa révolution...
http://massot.blog.lemonde.fr/massot/

et vive les tramways .......

Isaric

Re : [Clos] Centralisation Probleme Webcam+EasyCam

je ne suis pas au bord de la dépression mais bon on m'offre une caméra, et je ne peux la faire fonctionner... AIE AIE AIE

Je pleure avec toi http://forum.ubuntu-fr.org/viewtopic.ph … 38#p169138.
Mais j'ai confiance et ta question est bien venue ... pour moi simple utilisateur.

---

"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

guibis

Re : [Clos] Centralisation Probleme Webcam+EasyCam

ouais on est le gang des pleurnicheursacharnésdelawebcamquineveutpas fonctionner

oups je viens de réaliser qu'il faut installer les pythons-gnomes avant de pleurer....

Dernière modification par youp (Le 17/01/2006, à 23:25)

---

Si linux vous prend trop la tête  youp vous fait sa révolution...
http://massot.blog.lemonde.fr/massot/

et vive les tramways .......

guibis

Re : [Clos] Centralisation Probleme Webcam+EasyCam

rectificatif.... il arrive à installer le driver, ensuite il me met installation réussi.  je  peux ouvrir xawtv mais l'écran bleu est toujours là... aie aie aie

Docteur c'est grave ????????

Bon, j'ai fait un modprobe -f quickcam

et voilà ce que cela me donne.

massotjoseph@ubuntu:~$ sudo modprobe -f quickcam
Password:
Sorry, try again.
Password:
FATAL: Error inserting quickcam (/lib/modules/2.6.12-10-686-smp/misc/quickcam.ko): Unknown symbol in module, or unknown parameter (see dmesg)
massotjoseph@ubuntu:~$

Dernière modification par youp (Le 18/01/2006, à 11:54)

---

Si linux vous prend trop la tête  youp vous fait sa révolution...
http://massot.blog.lemonde.fr/massot/

et vive les tramways .......

Neoflex

Re : [Clos] Centralisation Probleme Webcam+EasyCam

salut,

j essaye d utiliser ma camera eyetoy de la playstation 2 qui est en fait fabriqué par logitech. j ai vu qu il est possible de la faire fonctionné sous windows donc j essaye sur linux grace a easycam2, il me reconnait bien : Bus 001 Device 002: ID 054c:0154 Sony Corp.
mais apres avoir cliquer sur suivant le programme reste bloqué sur Installation ...
Y a t il une solution ?

quadra38

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Bonjour anbreizh :-)
bonjour à tous ....

J'ai lu à peu près tout le fil ... 31 pages :-(

mais je ne trouve pas ce qui cloche

si je fais un lsusb

Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 1020:000a Labtec Wireless Optical Mouse
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 08ec:0008 M-Systems Flash Disk Pioneers
Bus 001 Device 003: ID 05a9:a511 OmniVision Technologies, Inc. OV511+ WebCam
Bus 001 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 0000:0000

donc la webcam est bien là ....

si je lance test.ctl

dlsym[./libng/plugins/drv0-v4l2.so]: ./libng/plugins/drv0-v4l2.so: undefined symbol: _ng_plugin_init
dlsym[./libng/plugins/drv1-v4l.so]: ./libng/plugins/drv1-v4l.so: undefined symbol: _ng_plugin_init
WARNING: no plugins found [/home/keyes/ubuntu/amsncvs-20051023]
vid-probe: trying: v4l2...
vid-probe: trying: v4l...
open(/dev/video0): No such device
open(/dev/video1): No such file or directory
open(/dev/video2): No such file or directory
open(/dev/video3): No such file or directory
vid-probe: trying: v4l2...
open(/dev/video0): No such device
open(/dev/video1): No such file or directory
open(/dev/video2): No such file or directory
open(/dev/video3): No such file or directory

la fenetre s'ouvre mais impossible de choisir un device ... la liste est vide ..

pourtant video0 est bien là dans /dev et j'ai essayé avec les droits 'root' et avec mes droits aussi ...

j'ai du louper un truc qq part ...

est-ce que quelqu'un peu me donner une piste pour avancer car là je cale et je pense que je suis au bon endroit ..

merci d'avance

[ vive Linux ... ]

Dernière modification par quadra38 (Le 18/01/2006, à 07:36)

---

" 100 fois sur le metier ... remettez votre ouvrage ... "
Portable Dell Inspiron 6400 - Ubuntu 11.04 & 11.10 +
PC fixe Carte Mère Asus M2N SLI Socket AM2 et Processeur Athlon™ 64 X2 5600+ - Ubuntu  12.04 et 12.10

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

youp et quadra38: Vous pouvez faire un 'lsmod' apres l'installation et un 'dmesg' quand vous branchez la webcam ?

---

"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

quadra38

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Bonjour ...

donc lsmod

pwc                    75892  0
nls_utf8                2176  1
rfcomm                 34972  0
.......................
ohci_hcd               18564  0
usbcore               104316  6 ov511,usbhid,ehci_hcd,usb_storage,ohci_hcd
ide_cd                 36996  0
cdrom                  33952  2 sr_mod,ide_cd
ide_disk               16128  8
.......................

pour le dmesg ... je mets | grep xxx  ou brut ???

pour le logiciel j'ai utilisé la version 0.4 ???  celle qui est en page 2 de ce topic ...

Dernière modification par quadra38 (Le 18/01/2006, à 12:30)

---

" 100 fois sur le metier ... remettez votre ouvrage ... "
Portable Dell Inspiron 6400 - Ubuntu 11.04 & 11.10 +
PC fixe Carte Mère Asus M2N SLI Socket AM2 et Processeur Athlon™ 64 X2 5600+ - Ubuntu  12.04 et 12.10

quadra38

Re : [Clos] Centralisation Probleme Webcam+EasyCam

dmesg

[4297603.403000] usb 1-2: USB disconnect, address 3
[4297607.330000] usb 1-2: new full speed USB device using ohci_hcd and address 5
[4297607.524000] /usr/share/EasyWebcam/ov511-2.30/ov511_core.c: USB OV511+ video device found
[4297607.525000] /usr/share/EasyWebcam/ov511-2.30/ov511_core.c: model: Creative Labs WebCam 3 (id=21)
[4297607.836000] /usr/share/EasyWebcam/ov511-2.30/ov511_core.c: Device at usb-0000:00:02.0-2 registered to minor 0
[4298261.315000] pwc Philips webcam module version 10.0.6-unofficial loaded.
[4298261.315000] pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[4298261.315000] pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[4298261.315000] pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[4298261.315000] pwc Trace options: 0x00a1
[4298261.322000] usbcore: registered new driver Philips webcam
[4298285.183000] /usr/share/EasyWebcam/ov511-2.30/ov511_core.c: No sensor is detected yet
[4298285.183000] /usr/share/EasyWebcam/ov511-2.30/ov511_core.c: No sensor is detected yet

voilà ce que j'ai si je reconnecte la webcam ...

---

" 100 fois sur le metier ... remettez votre ouvrage ... "
Portable Dell Inspiron 6400 - Ubuntu 11.04 & 11.10 +
PC fixe Carte Mère Asus M2N SLI Socket AM2 et Processeur Athlon™ 64 X2 5600+ - Ubuntu  12.04 et 12.10

quadra38

Re : [Clos] Centralisation Probleme Webcam+EasyCam

euh ... j'ai recopié deux fichiers ...

drv1-v4l.so
drv0-v4l2.so

dans le tiroir "/usr/share/EasywebCam/ov511-2.30/

et j'ai ça maintenant ... aurais-je un conflis avec EasyWebCam qui est pourtant desinstallé ?

natsemi                23904  0
ohci_hcd               18564  0
usbcore               104316  7 pwc,ov511,usbhid,ehci_hcd,usb_storage,ohci_hcd
ide_cd                 36996  0

et dmesg me donne quand je rebranche la Webcam :

[4320012.332000] usb 1-2: new full speed USB device using ohci_hcd and address 7
[4320012.444000] /usr/share/EasyWebcam/ov511-2.30/ov511_core.c: USB OV511+ video device found
[4320012.445000] /usr/share/EasyWebcam/ov511-2.30/ov511_core.c: model: Creative Labs WebCam 3 (id=21)
[4320012.766000] /usr/share/EasyWebcam/ov511-2.30/ov511_core.c: Device at usb-0000:00:02.0-2 registered to minor 0

Dernière modification par quadra38 (Le 18/01/2006, à 13:59)

---

" 100 fois sur le metier ... remettez votre ouvrage ... "
Portable Dell Inspiron 6400 - Ubuntu 11.04 & 11.10 +
PC fixe Carte Mère Asus M2N SLI Socket AM2 et Processeur Athlon™ 64 X2 5600+ - Ubuntu  12.04 et 12.10

guibis

Re : [Clos] Centralisation Probleme Webcam+EasyCam

lsmod

[4294672.613000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.613000] io scheduler noop registered
[4294672.613000] io scheduler anticipatory registered
[4294672.613000] io scheduler deadline registered
[4294672.613000] io scheduler cfq registered
[4294672.614000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.615000] NET: Registered protocol family 2
[4294672.624000] IP: routing cache hash table of 2048 buckets, 16Kbytes
[4294672.624000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[4294672.625000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[4294672.626000] TCP: Hash tables configured (established 16384 bind 16384)
[4294672.626000] NET: Registered protocol family 8
[4294672.626000] NET: Registered protocol family 20
[4294672.626000] ACPI wakeup devices:
[4294672.626000] SLPB PCI0 USB0 USB1 MODM UAR1 UAR2 LPT1
[4294672.626000] ACPI: (supports S0 S1 S4 S5)
[4294672.627000] Freeing unused kernel memory: 204k freed
[4294672.664000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294672.725000] Capability LSM initialized
[4294672.767000] NET: Registered protocol family 1
[4294672.802000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.803000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.803000] ACPI: bus type ide registered
[4294672.830000] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[4294672.830000] PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
[4294672.830000] VP_IDE: chipset revision 6
[4294672.830000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.830000] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
[4294672.830000]     ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
[4294672.830000]     ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:DMA
[4294672.830000] Probing IDE interface ide0...
[4294673.214000] hda: IBM-DTLA-305020, ATA DISK drive
[4294673.826000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.826000] Probing IDE interface ide1...
[4294674.870000] hdd: SONY DVD-ROM DDU1211, ATAPI CD/DVD-ROM drive
[4294674.921000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.921000] Probing IDE interface ide2...
[4294675.434000] Probing IDE interface ide3...
[4294675.946000] Probing IDE interface ide4...
[4294676.458000] Probing IDE interface ide5...
[4294676.981000] hda: max request size: 128KiB
[4294677.045000] hda: 39851760 sectors (20404 MB) w/380KiB Cache, CHS=39535/16/63, UDMA(100)
[4294677.045000] hda: cache flushes not supported
[4294677.045000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[4294677.147000] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
[4294677.147000] Uniform CD-ROM driver Revision: 3.20
[4294678.331000] Attempting manual resume
[4294678.332000] swsusp: Suspend partition has wrong signature?
[4294678.436000] usbcore: registered new driver usbfs
[4294678.436000] usbcore: registered new driver hub
[4294678.439000] USB Universal Host Controller Interface driver v2.2
[4294678.440000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294678.440000] PCI: setting IRQ 11 as level-triggered
[4294678.440000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294678.440000] uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[4294678.502000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[4294678.502000] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d400
[4294678.502000] hub 1-0:1.0: USB hub found
[4294678.503000] hub 1-0:1.0: 2 ports detected
[4294678.506000] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294678.506000] uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
[4294678.568000] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[4294678.568000] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d800
[4294678.568000] hub 2-0:1.0: USB hub found
[4294678.568000] hub 2-0:1.0: 2 ports detected
[4294678.691000] usb 1-1: new full speed USB device using uhci_hcd and address 2[4294678.987000] usb 1-2: new full speed USB device using uhci_hcd and address 3[4294682.065000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294682.065000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294682.270000] Attempting manual resume
[4294682.316000] swsusp: Suspend partition has wrong signature?
[4294682.379000] kjournald starting.  Commit interval 5 seconds
[4294682.379000] EXT3-fs: mounted filesystem with ordered data mode.
[4294685.452000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294692.900000] Adding 746980k swap on /dev/hda5.  Priority:-1 extents:1
[4294693.263000] EXT3 FS on hda1, internal journal
[4294705.415000] parport_pc: VIA 686A/8231 detected
[4294705.415000] parport_pc: probing current configuration
[4294705.415000] parport_pc: Current parallel port base: 0x378
[4294705.415000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[4294705.497000] parport_pc: VIA parallel port: io=0x378, irq=7
[4294705.514000] lp0: using parport0 (interrupt-driven).
[4294705.596000] mice: PS/2 mouse device common for all mice
[4294706.004000] input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
[4294706.641000] usbcore: registered new driver speedtch
[4294706.904000] ts: Compaq touchscreen protocol output
[4294707.179000] CSLIP: code copyright 1989 Regents of the University of California
[4294707.185000] PPP generic driver version 2.4.2
[4294708.339000] usb 1-1: found stage 1 firmware speedtch-1.bin
[4294709.783000] usb 1-1: found stage 2 firmware speedtch-2.bin
[4294714.192000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294715.471000] ADSL line is synchronising
[4294720.431000] Linux agpgart interface v0.101 (c) Dave Jones
[4294720.458000] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[4294720.517000] agpgart: AGP aperture is 64M @ 0xd0000000
[4294721.052000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294721.070000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294721.070000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294722.883000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[4294722.883000] PCI: setting IRQ 10 as level-triggered
[4294722.883000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294722.883000] PCI: Setting latency timer of device 0000:00:07.5 to 64
[4294725.517000] Linux video capture interface: v1.00
[4294725.622000] bttv: driver version 0.9.15 loaded
[4294725.622000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294725.627000] bttv: Bt8xx card found (0).
[4294725.628000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294725.628000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294725.628000] bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 11, latency: 32, mmio: 0xda011000
[4294725.628000] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[4294725.628000] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[4294725.628000] bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
[4294725.688000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294725.691000] bttv0: miro: id=9 tuner=3 radio=no stereo=no
[4294725.691000] bttv0: using tuner=3
[4294725.691000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294725.693000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294725.695000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294725.697000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[4294725.740000] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
[4294725.740000] tuner 1-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
[4294725.843000] bttv0: registered device video0
[4294725.847000] bttv0: registered device vbi0
[4294725.847000] bttv0: PLL: 28636363 => 35468950 .. ok
[4294726.308000] bt878: AUDIO driver version 0.0.0 loaded
[4294726.320000] bt878: Bt878 AUDIO function found (0).
[4294726.320000] ACPI: PCI Interrupt 0000:00:0d.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294726.320000] bt878(0): Bt878 (rev 17) at 00:0d.1, irq: 11, latency: 32, memory: 0xda010000
[4294729.372000] quickcam: disagrees about version of symbol struct_module
[4294729.659000] quickcam: disagrees about version of symbol struct_module
[4294729.966000] usbcore: registered new driver snd-usb-audio
[4294730.472000] ADSL line is up (320 Kib/s down | 160 Kib/s up)
[4294730.536000] quickcam: disagrees about version of symbol struct_module
[4294731.004000] Real Time Clock Driver v1.12
[4294731.168000] input: PC Speaker
[4294731.620000] Floppy drive(s): fd0 is 1.44M
[4294731.634000] FDC 0 is a post-1991 82077
[4294754.760000] NET: Registered protocol family 10
[4294754.760000] Disabled Privacy Extensions on device c0338fa0(lo)
[4294754.761000] IPv6 over IPv4 tunneling driver
[4294769.847000] ACPI: Power Button (FF) [PWRF]
[4294769.847000] ACPI: Power Button (CM) [PWRB]
[4294769.847000] ACPI: Sleep Button (CM) [SLPB]
[4294770.159000] ibm_acpi: ec object not found
[4294777.598000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294777.598000] apm: overridden by ACPI.
[4294780.184000] [drm] Initialized drm 1.0.0 20040925
[4294780.201000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294780.214000] [drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
[4294780.217000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294780.217000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4294780.217000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[4294790.658000] powernow: No powernow capabilities detected
[4294791.115000] Bluetooth: Core ver 2.7
[4294791.115000] NET: Registered protocol family 31
[4294791.115000] Bluetooth: HCI device and connection manager initialized
[4294791.115000] Bluetooth: HCI socket layer initialized
[4294791.233000] Bluetooth: L2CAP ver 2.7
[4294791.233000] Bluetooth: L2CAP socket layer initialized
[4294791.320000] Bluetooth: RFCOMM ver 1.5
[4294791.320000] Bluetooth: RFCOMM socket layer initialized
[4294791.320000] Bluetooth: RFCOMM TTY layer initialized
[4295017.127000] quickcam: no version for "struct_module" found: kernel tainted.[4295017.127000] quickcam: no version magic, tainting kernel.
[4295017.129000] quickcam: Unknown symbol _mmx_memcpy
[4295072.527000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295072.527000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295072.679000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295072.679000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295129.639000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295129.639000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295129.823000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295129.823000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295129.849000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295129.849000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.007000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.007000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.082000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.082000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.191000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.191000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.300000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.300000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.409000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.409000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.501000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.501000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.618000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.618000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.711000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.711000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.831000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.831000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.920000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.920000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.052000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295131.052000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.142000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295131.142000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.279000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295131.279000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.372000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295131.372000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.506000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295131.506000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.754000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295131.754000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.956000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295131.956000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295175.068000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295175.068000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295175.214000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295175.214000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.070000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4296030.070000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.195000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4296030.195000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.302000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4296030.302000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.358000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4296030.358000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.655000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4296030.655000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.813000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4296030.813000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296361.647000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4296361.647000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296361.796000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4296361.796000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296968.976000] end_request: I/O error, dev fd0, sector 0
[4297223.053000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4297223.053000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4297223.208000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4297223.208000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4297387.760000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4297387.760000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4297387.912000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4297387.912000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298045.080000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298045.080000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298045.220000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298045.220000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298045.784000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298045.784000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298045.910000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298045.910000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298046.089000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298046.089000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298046.215000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298046.215000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298430.880000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298430.880000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298431.050000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298431.050000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298584.581000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298584.581000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298584.704000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298584.704000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298780.045000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298780.045000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298780.127000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298780.127000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298797.890000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298797.890000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298798.033000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298798.033000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298881.042000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298881.042000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298881.208000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298881.208000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299849.824000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299849.824000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299849.976000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299849.976000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299908.038000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299908.038000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299908.152000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299908.152000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299933.190000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299933.190000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299933.302000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299933.302000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299993.470000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299993.470000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299994.069000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299994.069000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299994.663000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299994.663000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299994.809000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299994.809000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4301137.809000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4301137.809000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4301137.982000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4301137.982000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
root@ubuntu:~#
root@ubuntu:~# lsmod
Module                  Size  Used by
binfmt_misc            12456  1
rfcomm                 40600  0
l2cap                  27840  5 rfcomm
bluetooth              51364  4 rfcomm,l2cap
cpufreq_userspace       6208  0
cpufreq_stats           6080  0
freq_table              4736  1 cpufreq_stats
cpufreq_powersave       1920  0
cpufreq_ondemand        7208  0
cpufreq_conservative     8140  0
r128                   46464  1
drm                    66708  2 r128
video                  16004  0
tc1100_wmi              6916  0
sony_acpi               5548  0
pcc_acpi               11360  0
hotkey                  9508  0
dev_acpi               11396  0
i2c_acpi_ec             5696  0
button                  6704  0
battery                 9572  0
container               4608  0
ac                      4932  0
ipv6                  264000  16
floppy                 60564  0
pcspkr                  3880  0
rtc                    13672  0
snd_usb_audio          76032  0
snd_usb_lib            16160  1 snd_usb_audio
snd_hwdep               9248  1 snd_usb_audio
bt878                  10504  0
tuner                  27336  0
bttv                  156432  1 bt878
video_buf              21764  1 bttv
i2c_algo_bit            9640  1 bttv
v4l2_common             5952  1 bttv
btcx_risc               5096  1 bttv
tveeprom               13336  1 bttv
videodev                9760  1 bttv
snd_seq_dummy           3844  0
snd_seq_oss            34976  0
snd_seq_midi            9344  0
snd_seq_midi_event      7392  2 snd_seq_oss,snd_seq_midi
snd_seq                55280  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_via82xx            29600  0
gameport               16200  1 snd_via82xx
snd_ac97_codec         84508  1 snd_via82xx
snd_pcm_oss            53760  0
snd_mixer_oss          19584  1 snd_pcm_oss
snd_pcm                92900  4 snd_usb_audio,snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer              25956  2 snd_seq,snd_pcm
snd_page_alloc         10824  2 snd_via82xx,snd_pcm
snd_mpu401_uart         8192  1 snd_via82xx
snd_rawmidi            25952  3 snd_usb_lib,snd_seq_midi,snd_mpu401_uart
snd_seq_device          8716  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd                    57764  13 snd_usb_audio,snd_hwdep,snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore              10176  1 snd
i2c_viapro              8208  0
via686a                20088  0
i2c_sensor              3584  1 via686a
i2c_core               21760  8 i2c_acpi_ec,tuner,bttv,i2c_algo_bit,tveeprom,i2c_viapro,via686a,i2c_sensor
pci_hotplug            28412  0
via_agp                 9888  1
agpgart                35436  2 drm,via_agp
dm_mod                 59232  1
vfat                   14176  0
fat                    53820  1 vfat
pppoatm                 6368  1
ppp_generic            31028  5 pppoatm
slhc                    7168  1 ppp_generic
tsdev                   8000  0
evdev                   9920  0
speedtch               13864  0
firmware_class         10304  2 bttv,speedtch
usb_atm                16432  2 speedtch
psmouse                30628  0
mousedev               12132  1
parport_pc             36356  1
lp                     12548  0
parport                37384  2 parport_pc,lp
md                     47536  0
ext3                  138824  1
jbd                    59768  1 ext3
mbcache                10116  1 ext3
thermal                13320  0
processor              23816  1 thermal
fan                     4708  0
uhci_hcd               32720  0
usbcore               121308  6 snd_usb_audio,snd_usb_lib,speedtch,usb_atm,uhci_hcd
ide_cd                 42148  0
cdrom                  40096  1 ide_cd
ide_disk               18880  3
ide_generic             1600  0
via82cxxx              13724  1
ide_core              140628  4 ide_cd,ide_disk,ide_generic,via82cxxx
unix                   29392  693
fbcon                  38880  0
tileblit                2592  1 fbcon
font                    8448  1 fbcon
bitblit                 5856  1 fbcon
vesafb                  8216  0
cfbcopyarea             4832  1 vesafb
cfbimgblt               3168  1 vesafb
cfbfillrect             4096  1 vesafb
softcursor              2496  1 vesafb
capability              4936  0
commoncap               7040  1 capability
root@ubuntu:~#

et dmesg ma caméra est allumé dés le démarrage, automatiquement.

[4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 255MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 65520
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:1
[4294667.296000]   Normal zone: 61424 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 VIA694                                ) @ 0x000f6d60
[4294667.296000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
[4294667.296000] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
[4294667.296000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01241000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[4294667.296000] Detected 800.373 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.954000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)[4294670.956000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.974000] Memory: 250220k/262080k available (1723k kernel code, 11196k reserved, 740k data, 204k init, 0k highmem)
[4294670.974000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.974000] Calibrating delay loop... 1581.05 BogoMIPS (lpj=790528)
[4294670.997000] Security Framework v1.0.0 initialized
[4294670.997000] SELinux:  Disabled at boot.
[4294670.997000] Mount-cache hash table entries: 512
[4294670.997000] CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
[4294670.997000] CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
[4294670.997000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294670.997000] CPU: L2 Cache: 64K (64 bytes/line)
[4294670.997000] CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
[4294670.997000] Intel machine check architecture supported.
[4294670.997000] Intel machine check reporting enabled on CPU#0.
[4294670.997000] Enabling fast FPU save and restore... done.
[4294670.997000] Checking 'hlt' instruction... OK.
[4294671.001000] checking if image is initramfs... it is
[4294672.168000] Freeing initrd memory: 5538k freed
[4294672.175000] ACPI: Looking for DSDT in initrd... not found!
[4294672.319000]  not found!
[4294672.328000] ACPI: setting ELCR to 0800 (from 0c00)
[4294672.330000] CPU0: AMD Duron(tm) Processor stepping 01
[4294672.330000] SMP motherboard not detected.
[4294672.330000] Local APIC not detected. Using dummy APIC emulation.
[4294672.330000] Brought up 1 CPUs
[4294672.330000] CPU0 attaching sched-domain:
[4294672.330000]  domain 0: span 01
[4294672.330000]   groups: 01
[4294672.330000]   domain 1: span 01
[4294672.330000]    groups: 01
[4294672.331000] NET: Registered protocol family 16
[4294672.331000] ACPI: bus type pci registered
[4294672.347000] PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
[4294672.347000] PCI: Using configuration type 1
[4294672.347000] mtrr: v2.0 (20020519)
[4294672.348000] ACPI: Subsystem revision 20050729
[4294672.363000] ACPI: Interpreter enabled
[4294672.363000] ACPI: Using PIC for interrupt routing
[4294672.365000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294672.365000] PCI: Probing PCI hardware (bus 00)
[4294672.365000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294672.365000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294672.369000] Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
[4294672.369000] Boot video device is 0000:01:00.0
[4294672.409000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294672.411000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294672.412000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294672.413000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[4294672.414000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294672.420000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294672.420000] pnp: PnP ACPI init
[4294672.428000] pnp: PnP ACPI: found 12 devices
[4294672.428000] PnPBIOS: Disabled by ACPI PNP
[4294672.428000] PCI: Using ACPI for IRQ routing
[4294672.428000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294672.463000] audit: initializing netlink socket (disabled)
[4294672.463000] audit: initialized
[4294672.463000] VFS: Disk quotas dquot_6.5.1
[4294672.463000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.464000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294672.464000] devfs: boot_options: 0x0
[4294672.464000] Initializing Cryptographic API
[4294672.464000] Applying VIA southbridge workaround.
[4294672.464000] PCI: Disabling Via external APIC routing
[4294672.464000] isapnp: Scanning for PnP cards...
[4294672.560000] isapnp: Card 'NE2000 PLUG & PLAY ETHERNET CARD'
[4294672.560000] isapnp: 1 Plug & Play card detected total
[4294672.608000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294672.608000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.608000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.608000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294672.608000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.609000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.613000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.613000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.613000] io scheduler noop registered
[4294672.613000] io scheduler anticipatory registered
[4294672.613000] io scheduler deadline registered
[4294672.613000] io scheduler cfq registered
[4294672.614000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.615000] NET: Registered protocol family 2
[4294672.624000] IP: routing cache hash table of 2048 buckets, 16Kbytes
[4294672.624000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[4294672.625000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[4294672.626000] TCP: Hash tables configured (established 16384 bind 16384)
[4294672.626000] NET: Registered protocol family 8
[4294672.626000] NET: Registered protocol family 20
[4294672.626000] ACPI wakeup devices:
[4294672.626000] SLPB PCI0 USB0 USB1 MODM UAR1 UAR2 LPT1
[4294672.626000] ACPI: (supports S0 S1 S4 S5)
[4294672.627000] Freeing unused kernel memory: 204k freed
[4294672.664000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294672.725000] Capability LSM initialized
[4294672.767000] NET: Registered protocol family 1
[4294672.802000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.803000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.803000] ACPI: bus type ide registered
[4294672.830000] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[4294672.830000] PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
[4294672.830000] VP_IDE: chipset revision 6
[4294672.830000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.830000] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
[4294672.830000]     ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
[4294672.830000]     ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:DMA
[4294672.830000] Probing IDE interface ide0...
[4294673.214000] hda: IBM-DTLA-305020, ATA DISK drive
[4294673.826000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.826000] Probing IDE interface ide1...
[4294674.870000] hdd: SONY DVD-ROM DDU1211, ATAPI CD/DVD-ROM drive
[4294674.921000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.921000] Probing IDE interface ide2...
[4294675.434000] Probing IDE interface ide3...
[4294675.946000] Probing IDE interface ide4...
[4294676.458000] Probing IDE interface ide5...
[4294676.981000] hda: max request size: 128KiB
[4294677.045000] hda: 39851760 sectors (20404 MB) w/380KiB Cache, CHS=39535/16/63, UDMA(100)
[4294677.045000] hda: cache flushes not supported
[4294677.045000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[4294677.147000] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
[4294677.147000] Uniform CD-ROM driver Revision: 3.20
[4294678.331000] Attempting manual resume
[4294678.332000] swsusp: Suspend partition has wrong signature?
[4294678.436000] usbcore: registered new driver usbfs
[4294678.436000] usbcore: registered new driver hub
[4294678.439000] USB Universal Host Controller Interface driver v2.2
[4294678.440000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294678.440000] PCI: setting IRQ 11 as level-triggered
[4294678.440000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294678.440000] uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[4294678.502000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[4294678.502000] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d400
[4294678.502000] hub 1-0:1.0: USB hub found
[4294678.503000] hub 1-0:1.0: 2 ports detected
[4294678.506000] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294678.506000] uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
[4294678.568000] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[4294678.568000] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d800
[4294678.568000] hub 2-0:1.0: USB hub found
[4294678.568000] hub 2-0:1.0: 2 ports detected
[4294678.691000] usb 1-1: new full speed USB device using uhci_hcd and address 2[4294678.987000] usb 1-2: new full speed USB device using uhci_hcd and address 3[4294682.065000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294682.065000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294682.270000] Attempting manual resume
[4294682.316000] swsusp: Suspend partition has wrong signature?
[4294682.379000] kjournald starting.  Commit interval 5 seconds
[4294682.379000] EXT3-fs: mounted filesystem with ordered data mode.
[4294685.452000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294692.900000] Adding 746980k swap on /dev/hda5.  Priority:-1 extents:1
[4294693.263000] EXT3 FS on hda1, internal journal
[4294705.415000] parport_pc: VIA 686A/8231 detected
[4294705.415000] parport_pc: probing current configuration
[4294705.415000] parport_pc: Current parallel port base: 0x378
[4294705.415000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[4294705.497000] parport_pc: VIA parallel port: io=0x378, irq=7
[4294705.514000] lp0: using parport0 (interrupt-driven).
[4294705.596000] mice: PS/2 mouse device common for all mice
[4294706.004000] input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
[4294706.641000] usbcore: registered new driver speedtch
[4294706.904000] ts: Compaq touchscreen protocol output
[4294707.179000] CSLIP: code copyright 1989 Regents of the University of California
[4294707.185000] PPP generic driver version 2.4.2
[4294708.339000] usb 1-1: found stage 1 firmware speedtch-1.bin
[4294709.783000] usb 1-1: found stage 2 firmware speedtch-2.bin
[4294714.192000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294715.471000] ADSL line is synchronising
[4294720.431000] Linux agpgart interface v0.101 (c) Dave Jones
[4294720.458000] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[4294720.517000] agpgart: AGP aperture is 64M @ 0xd0000000
[4294721.052000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294721.070000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294721.070000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294722.883000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[4294722.883000] PCI: setting IRQ 10 as level-triggered
[4294722.883000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294722.883000] PCI: Setting latency timer of device 0000:00:07.5 to 64
[4294725.517000] Linux video capture interface: v1.00
[4294725.622000] bttv: driver version 0.9.15 loaded
[4294725.622000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294725.627000] bttv: Bt8xx card found (0).
[4294725.628000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294725.628000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294725.628000] bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 11, latency: 32, mmio: 0xda011000
[4294725.628000] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[4294725.628000] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[4294725.628000] bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
[4294725.688000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294725.691000] bttv0: miro: id=9 tuner=3 radio=no stereo=no
[4294725.691000] bttv0: using tuner=3
[4294725.691000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294725.693000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294725.695000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294725.697000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[4294725.740000] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
[4294725.740000] tuner 1-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
[4294725.843000] bttv0: registered device video0
[4294725.847000] bttv0: registered device vbi0
[4294725.847000] bttv0: PLL: 28636363 => 35468950 .. ok
[4294726.308000] bt878: AUDIO driver version 0.0.0 loaded
[4294726.320000] bt878: Bt878 AUDIO function found (0).
[4294726.320000] ACPI: PCI Interrupt 0000:00:0d.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294726.320000] bt878(0): Bt878 (rev 17) at 00:0d.1, irq: 11, latency: 32, memory: 0xda010000
[4294729.372000] quickcam: disagrees about version of symbol struct_module
[4294729.659000] quickcam: disagrees about version of symbol struct_module
[4294729.966000] usbcore: registered new driver snd-usb-audio
[4294730.472000] ADSL line is up (320 Kib/s down | 160 Kib/s up)
[4294730.536000] quickcam: disagrees about version of symbol struct_module
[4294731.004000] Real Time Clock Driver v1.12
[4294731.168000] input: PC Speaker
[4294731.620000] Floppy drive(s): fd0 is 1.44M
[4294731.634000] FDC 0 is a post-1991 82077
[4294754.760000] NET: Registered protocol family 10
[4294754.760000] Disabled Privacy Extensions on device c0338fa0(lo)
[4294754.761000] IPv6 over IPv4 tunneling driver
[4294769.847000] ACPI: Power Button (FF) [PWRF]
[4294769.847000] ACPI: Power Button (CM) [PWRB]
[4294769.847000] ACPI: Sleep Button (CM) [SLPB]
[4294770.159000] ibm_acpi: ec object not found
[4294777.598000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294777.598000] apm: overridden by ACPI.
[4294780.184000] [drm] Initialized drm 1.0.0 20040925
[4294780.201000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294780.214000] [drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
[4294780.217000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294780.217000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4294780.217000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[4294790.658000] powernow: No powernow capabilities detected
[4294791.115000] Bluetooth: Core ver 2.7
[4294791.115000] NET: Registered protocol family 31
[4294791.115000] Bluetooth: HCI device and connection manager initialized
[4294791.115000] Bluetooth: HCI socket layer initialized
[4294791.233000] Bluetooth: L2CAP ver 2.7
[4294791.233000] Bluetooth: L2CAP socket layer initialized
[4294791.320000] Bluetooth: RFCOMM ver 1.5
[4294791.320000] Bluetooth: RFCOMM socket layer initialized
[4294791.320000] Bluetooth: RFCOMM TTY layer initialized
[4295017.127000] quickcam: no version for "struct_module" found: kernel tainted.[4295017.127000] quickcam: no version magic, tainting kernel.
[4295017.129000] quickcam: Unknown symbol _mmx_memcpy
[4295072.527000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295072.527000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295072.679000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295072.679000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295129.639000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295129.639000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295129.823000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295129.823000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295129.849000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295129.849000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.007000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.007000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.082000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.082000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.191000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.191000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.300000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.300000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.409000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.409000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.501000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.501000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.618000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.618000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.711000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.711000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.831000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295130.831000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295130.920000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295130.920000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.052000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295131.052000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.142000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295131.142000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.279000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295131.279000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.372000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295131.372000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.506000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295131.506000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.754000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295131.754000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295131.956000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295131.956000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295175.068000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295175.068000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295175.214000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295175.214000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.070000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4296030.070000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.195000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4296030.195000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.302000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4296030.302000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.358000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4296030.358000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.655000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4296030.655000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296030.813000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4296030.813000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296361.647000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4296361.647000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296361.796000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4296361.796000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4296968.976000] end_request: I/O error, dev fd0, sector 0
[4297223.053000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4297223.053000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4297223.208000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4297223.208000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4297387.760000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4297387.760000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4297387.912000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4297387.912000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298045.080000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298045.080000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298045.220000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298045.220000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298045.784000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298045.784000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298045.910000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298045.910000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298046.089000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298046.089000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298046.215000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298046.215000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298430.880000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298430.880000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298431.050000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298431.050000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298584.581000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298584.581000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298584.704000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298584.704000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298780.045000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298780.045000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298780.127000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298780.127000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298797.890000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298797.890000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298798.033000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298798.033000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298881.042000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4298881.042000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4298881.208000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4298881.208000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299849.824000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299849.824000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299849.976000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299849.976000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299908.038000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299908.038000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299908.152000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299908.152000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299933.190000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299933.190000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299933.302000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299933.302000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299993.470000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299993.470000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299994.069000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299994.069000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299994.663000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4299994.663000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4299994.809000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4299994.809000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4301137.809000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4301137.809000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4301137.982000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4301137.982000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
root@ubuntu:~#

Dernière modification par youp (Le 18/01/2006, à 13:53)

---

Si linux vous prend trop la tête  youp vous fait sa révolution...
http://massot.blog.lemonde.fr/massot/

et vive les tramways .......

quadra38

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Bonjour à tous ....

je bloque toujours sur ce video0 non trouvé ...

WARNING: no plugins found [/home/keyes/ubuntu/amsncvs-20051023]
vid-probe: trying: v4l2...
vid-probe: trying: v4l...
open(/dev/video0): No such device

alors que ls -l /dev/video* me donne ça :

ls -l /dev/video*
crw-rw----  1 root video 81, 0 2006-01-19 08:36 /dev/video0

par contre l'installation du driver par EasyPwc ... me renomme ou me deplace ma sources.list ...

c'est embettant pour la suite ...

à voir peut-etre ??

salutations

Dernière modification par quadra38 (Le 19/01/2006, à 08:49)

---

" 100 fois sur le metier ... remettez votre ouvrage ... "
Portable Dell Inspiron 6400 - Ubuntu 11.04 & 11.10 +
PC fixe Carte Mère Asus M2N SLI Socket AM2 et Processeur Athlon™ 64 X2 5600+ - Ubuntu  12.04 et 12.10

Anbreizh

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Je suis vraiment désole mais je ne peut pas regarder ce probleme en profondeur car je ne suis pas tres disponible ne ce moment (la vie privé......)
Je vous invite donc a Tester EasyCam2 et de poster votre probleme  (pour ceux qui ne l'on pas encore fait ) et j'espere que quelqu'un sera vous repondre
Je repasserais de temps a autre mais la c'est malheureusement impossible

Encore désole

---

"C'est le devoir de chaque homme de rendre au monde au moins autant qu'il en a reçu"     Albert Einstein
Pour votre webcam : http://projet.jbtheou.fr
Mon site web (Mathématique, physique, science et service de publication ) http://jbtheou.fr

guibis

Re : [Clos] Centralisation Probleme Webcam+EasyCam

ls -l /dev/video* me donne ça aussi:
pour ma part... avec ls -l /dev/video* :

root@ubuntu:~#  ls -l /dev/video*
crw-rw----  1 root video 81, 0 2006-01-19 12:24 /dev/video0
root@ubuntu:~#

Donc de ce côté cela doit être bon.
Je pense qu'il va falloir que je compile les sources du noyau kernel.

---

Si linux vous prend trop la tête  youp vous fait sa révolution...
http://massot.blog.lemonde.fr/massot/

et vive les tramways .......

Isaric

Re : [Clos] Centralisation Probleme Webcam+EasyCam

Je m'adresse aux spécialistes de webcam et je recherche une explication sur le post #24 de
http://forum.ubuntu-fr.org/viewtopic.ph … 03#p168203

Dernière modification par Isaric (Le 19/01/2006, à 13:52)

---

"Être bahá'í signifie simplement aimer la terre toute entière, aimer l'humanité et essayer de la servir, travailler pour la paix universelle et la famille humaine" 'Abdul'l-Bahá
"Vouloir s'ouvrir aux autres n'est pas une preuve de faiblesse, c'est une preuve d'intelligence"  Matthieu Ricard.

quadra38

Re : [Clos] Centralisation Probleme Webcam+EasyCam

merci Anbreizh ...

j'ai essayé EasyCam2 ... auparavent ... et meme maintenant ...

mais il plante lors de l'installation du driver .. enfin ... il se fige et j'ai beau cliquer sur "avancer" ou "installer" ... rien ...

salutations

---

" 100 fois sur le metier ... remettez votre ouvrage ... "
Portable Dell Inspiron 6400 - Ubuntu 11.04 & 11.10 +
PC fixe Carte Mère Asus M2N SLI Socket AM2 et Processeur Athlon™ 64 X2 5600+ - Ubuntu  12.04 et 12.10