Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 20/06/2015, à 17:04

louisoquinn

No bootable device

Bonjour à tous,

Après avoir discuté d'Ubuntu et de l'OpenSource en général à un ami, il m'a demandé de lui installer Ubuntu sur son ordi portable Packard Bell EasyNote ENTG71BM. Il était convaincu, ne voulait plus de Windows. J'ai choisi de lui installer Xubuntu, plus léger pour son ordi. J'ai donc booté sur une clé, installé Xubuntu, tout se passe bien.

Puis à la fin de l'installation, je redémarre et là : "No bootable device"

Dans le BIOS, le HDD est bel et bien reconnu... J'ai essayé de changer divers paramètres comme UEFI/Legacy, et j'ai chargé les paramètres par défaut, mais rien n'y fait. J'ai également effectué Boot-repair-disk avec donc une réinstallation de Grub; mais encore une fois c'est un échec. J'ai épuisé mes idées, je ne suis qu'un amateur et je vous avoue être bloqué.

Que dois-je faire ? J'ai pas envie de lui repayer un pc lol


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#2 Le 20/06/2015, à 17:10

louisoquinn

Re : No bootable device

En parcourant le forum, j'ai vu un topic similaire : j'ai effectué ALT+F10 et j'ai réussi à rentrer dans Xubuntu, rapidement, il fonctionne nickel.

Je vais donc devoir appuyer sur ALT+F10 à chaque démarrage ? :'(


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#3 Le 21/06/2015, à 09:10

malbo

Re : No bootable device

Peux-tu donner le lien vers le fameux "topic similaire" ? D'autre part, au lieu d'effectuer ALT+F10, peux-tu effectuer F10 seulement pour vérifier si ça donne le même résultat ou pas ?

Hors ligne

#4 Le 21/06/2015, à 12:54

louisoquinn

Re : No bootable device

le topic : https://forum.ubuntu-fr.org/viewtopic.php?id=1788831

J'essaie F10 de suite :-)


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#5 Le 21/06/2015, à 12:56

louisoquinn

Re : No bootable device

Cela ne fonctionne pas..


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#6 Le 21/06/2015, à 13:28

malbo

Re : No bootable device

Merci pour le lien : j'avais oublié cette histoire de ALT+F10. Normalement cette commande sert pour la restauration du système Windows d'après ce qu'a écrit oceaneC dans ces posts (ici et ) mais il se trouve que sur l'ordi d'oceaneC et sur le tien, ça permet d'accéder au Boot Menu.

Hors ligne

#7 Le 23/06/2015, à 12:37

louisoquinn

Re : No bootable device

Oui voilà c'est tout à fait ça. Mettre à jour le BIOS ne résoudra pas le problème n'est-ce pas ?

Par ailleurs, quand j'ai lancé l'installation de Xubuntu, lors du choix de l'installation, il ne détectait pas Windows mais justement cette fameuse partition de récupération. Ca donnait qqch du genre "installer Ubuntu à coté de "win recovery" (j'ai inventé le nom, je ne me souviens pas). Enfin voilà j'avais choisi "supprimer le disque et installer Ubuntu"


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#8 Le 23/06/2015, à 13:06

malbo

Re : No bootable device

Je n'aime pas répondre à l'aveuglette. Je te prie de démarrer une session sur ton Xubuntu installé (en passant par ALT+F10) et depuis cette session, de faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse.

Hors ligne

#9 Le 23/06/2015, à 22:25

louisoquinn

Re : No bootable device

http://paste.ubuntu.com/11764526/

et voici le lien. Merci pour votre aide smile


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#10 Le 24/06/2015, à 05:02

malbo

Re : No bootable device

Le Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 15.04 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   976,773,167   976,773,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2       1,050,624   968,624,127   967,573,504 Data partition (Linux)
/dev/sda3     968,624,128   976,771,071     8,146,944 Swap partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        8AD3-95A3                              vfat       
/dev/sda2        984e4bb1-bf2d-4c9e-8c63-eac430a998b7   ext4       
/dev/sda3        adb0571f-fcf9-4fb8-909a-eeed4818d441   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jun 23 23:08 ata-MATSHITA_DVD-RAM_UJ8HC_KO0080702044521919E5 -> ../../sr0
lrwxrwxrwx 1 root root  9 Jun 23 23:22 ata-ST500LT012-1DG142_W3PC6DW8 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 23 23:22 ata-ST500LT012-1DG142_W3PC6DW8-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 23 23:22 ata-ST500LT012-1DG142_W3PC6DW8-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 23 23:22 ata-ST500LT012-1DG142_W3PC6DW8-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Jun 23 23:22 wwn-0x15897281494750613504x -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 23 23:22 wwn-0x15897281494750613504x-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 23 23:22 wwn-0x15897281494750613504x-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 23 23:22 wwn-0x15897281494750613504x-part3 -> ../../sda3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  984e4bb1-bf2d-4c9e-8c63-eac430a998b7
else
  search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  984e4bb1-bf2d-4c9e-8c63-eac430a998b7
	else
	  search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
	fi
	linux	/boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.19.0-21-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
	menuentry 'Ubuntu, with Linux 3.19.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-21-generic-advanced-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		else
		  search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		fi
		echo	'Loading Linux 3.19.0-21-generic ...'
		linux	/boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.19.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 3.19.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-21-generic-init-upstart-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		else
		  search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		fi
		echo	'Loading Linux 3.19.0-21-generic ...'
		linux	/boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.19.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 3.19.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-21-generic-recovery-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		else
		  search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		fi
		echo	'Loading Linux 3.19.0-21-generic ...'
		linux	/boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.19.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 3.19.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-15-generic-advanced-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		else
		  search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		fi
		echo	'Loading Linux 3.19.0-15-generic ...'
		linux	/boot/vmlinuz-3.19.0-15-generic root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.19.0-15-generic
	}
	menuentry 'Ubuntu, with Linux 3.19.0-15-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-15-generic-init-upstart-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		else
		  search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		fi
		echo	'Loading Linux 3.19.0-15-generic ...'
		linux	/boot/vmlinuz-3.19.0-15-generic root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.19.0-15-generic
	}
	menuentry 'Ubuntu, with Linux 3.19.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-15-generic-recovery-984e4bb1-bf2d-4c9e-8c63-eac430a998b7' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		else
		  search --no-floppy --fs-uuid --set=root 984e4bb1-bf2d-4c9e-8c63-eac430a998b7
		fi
		echo	'Loading Linux 3.19.0-15-generic ...'
		linux	/boot/vmlinuz-3.19.0-15-generic root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.19.0-15-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 8AD3-95A3
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=8AD3-95A3  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda3 during installation
UUID=adb0571f-fcf9-4fb8-909a-eeed4818d441 none            swap    sw              0       0
UUID=8AD3-95A3	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------


ADDITIONAL INFORMATION :
=================== log of boot-info 2015-06-23__23h22 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in installed-session (Ubuntu 15.04, vivid, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-21-generic.efi.signed root=UUID=984e4bb1-bf2d-4c9e-8c63-eac430a998b7 ro quiet splash vt.handoff=7

=================== os-prober:
/dev/disk/by-uuid/984e4bb1-bf2d-4c9e-8c63-eac430a998b7:L'OS actuellement utilisé - Ubuntu 15.04 CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="8AD3-95A3" TYPE="vfat" PARTUUID="fb5f1969-d288-4094-a776-e994610d6988"
/dev/sda2: UUID="984e4bb1-bf2d-4c9e-8c63-eac430a998b7" TYPE="ext4" PARTUUID="8ff41ff9-9bd0-47e9-8a56-90840a81f366"
/dev/sda3: UUID="adb0571f-fcf9-4fb8-909a-eeed4818d441" TYPE="swap" PARTUUID="1e9cc75b-44c4-4ad2-911a-7c83089d298a"

disk/by-uuid/984e4bb1-bf2d-4c9e-8c63-eac430a998b7 (sda) has unknown type. Veuillez indiquer ce message à boot.repair@gmail.com

1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Linux not detected by os-prober on sda2. Veuillez indiquer ce message à boot.repair@gmail.com

=================== //etc/grub.d/ :
drwxr-xr-x  3 root root     4096 juin  21 05:30 grub.d
total 84
-rwxr-xr-x 1 root root  6058 févr. 11 20:53 05_debian_theme
-rwxr-xr-x 1 root root 11082 avril  6 22:43 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars   6 17:23 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril  6 22:43 30_os-prober
-rwxr-xr-x 1 root root   170 juin  20 17:54 40_custom
-rwxr-xr-x 1 root root  1416 avril  6 22:43 50_uefi-firmware
-rwxr-xr-x 1 root root  9424 avril  6 22:43 DS_00_header
-rwxr-xr-x 1 root root 12261 avril  6 22:43 DS_10_linux
-rwxr-xr-x 1 root root   214 avril  6 22:43 DS_40_custom
-rwxr-xr-x 1 root root   216 avril  6 22:43 DS_41_custom
drwxr-xr-x 2 root root  4096 juin  21 05:30 proxifiedScripts
-rw-r--r-- 1 root root   483 avril  6 22:43 README


=================== //etc/grub.d/40_custom :

menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 8AD3-95A3
chainloader (${root})/EFI/ubuntu/MokManager.efi
}




=================== //etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT="Ubuntu"
GRUB_HIDDEN_TIMEOUT="0"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

GRUB_SAVEDEFAULT="false"
GRUB_DISABLE_OS_PROBER="true"


/boot/efi detected in the fstab of sda2: UUID=8AD3-95A3	 (sda1)

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
No BootOrder is set; firmware will attempt recovery
Boot0000* Unknown Device: 	HD(1,800,100000,fb5f1969-d288-4094-a776-e994610d6988)File(EFIubuntushimx64.efi)RC
Boot0002* ubuntu	HD(1,800,100000,fb5f1969-d288-4094-a776-e994610d6988)File(EFIubuntushimx64.efi)
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	customized,	farbios,	/.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA ST500LT012-1DG14 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:

Number  Start   End    Size    File system     Name  Flags
1      1049kB  538MB  537MB   fat32                 boot, esp
2      538MB   496GB  495GB   ext4
3      496GB   500GB  4171MB  linux-swap(v1)

=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA ST500LT012-1DG14:;
1:1049kB:538MB:537MB:fat32::boot, esp;
2:538MB:496GB:495GB:ext4::;
3:496GB:500GB:4171MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL MODEL            UUID
sda   disk        465,8G       ST500LT012-1DG14
sda1  part vfat     512M                        8AD3-95A3
sda2  part ext4   461,4G                        984e4bb1-bf2d-4c9e-8c63-eac430a998b7
sda3  part swap     3,9G                        adb0571f-fcf9-4fb8-909a-eeed4818d441
sr0   rom          1024M       DVD-RAM UJ8HC

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /boot/efi
sda2     1  0  0         /
sda3     1  0  0         [SWAP]
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=1952192k,nr_inodes=488048,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=392664k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=392664k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hpet hugepages i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg kvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 xconsole zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 a3 95 d3 8a 4e  4f 20 4e 41 4d 45 20 20  |..)....NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     384M  6.0M  378M   2% /run
/dev/sda2      ext4      455G  5.3G  426G   2% /
tmpfs          tmpfs     1.9G   18M  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sda1      vfat      511M  3.4M  508M   1% /boot/efi
tmpfs          tmpfs     384M   40K  384M   1% /run/user/1000

=================== fdisk -l:

Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 36F56BC1-B3F3-4ED7-BCED-4B559B7C4BFE

Device         Start       End   Sectors   Size Type
/dev/sda1       2048   1050623   1048576   512M EFI System
/dev/sda2    1050624 968624127 967573504 461.4G Linux filesystem
/dev/sda3  968624128 976771071   8146944   3.9G Linux swap




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub fix customized files) and reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file rename-ms-efi


=================== Blockers in case of suggested repair
Veuillez utiliser ce logiciel dans une session-live (live-CD ou live-USB). Cela vous permettra d'utiliser cette fonctionnalité.


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [Linux] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

L'extrait qui montre le paramétrage du "Bios" (en fait, c'est l'UEFI) est là :

=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
No BootOrder is set; firmware will attempt recovery
Boot0000* Unknown Device: 	HD(1,800,100000,fb5f1969-d288-4094-a776-e994610d6988)File(EFIubuntushimx64.efi)RC
Boot0002* ubuntu	HD(1,800,100000,fb5f1969-d288-4094-a776-e994610d6988)File(EFIubuntushimx64.efi)
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

On y voit que Xubuntu est démarré en passant par une entrée nommée "Unknown Device" (comme dans le cas d'oceaneC en bas de ce post).
La ligne "No BootOrder is set; firmware will attempt recovery" signifie que le réglage de la priorité de démarrage a été effacé. J'ai trouvé ça en analysant ce rapport de Bug #1460781 dans lequel on peut voir que la commande "sudo efibootmgr -O" produit ce même résultat : "No BootOrder is set; firmware will attempt recovery". Et ce doc révèle que la commande "sudo efibootmgr -O" sert bien à effacer l'ordre de démarrage. Je ne dis pas du tout qu'il faut utiliser cette commande dans ce cas, j'essaie seulement d'analyser ce que je vois.
Je me dégonfle de te proposer de modifier quelque chose là-dedans. Quant à mettre à jour le Bios, je te déconseille aussi. Ton ami devra utiliser ALT+F10.

EDIT : je souhaiterais ajouter ce modèle d'ordi dans la Liste des portables « Packard Bell » mais je constate en faisant mes recherches avec Google sur "TG71BM" ("EN" qui est en tête est l’abréviation de EasyNote) qu'il y a plusieurs modèles qui ont ce préfixe. Pourrais-tu donner un lien vers une page où on peut voir le modèle en question sur le site où il a été acheté ?

Dernière modification par malbo (Le 24/06/2015, à 05:28)

Hors ligne

#11 Le 24/06/2015, à 06:47

malbo

Re : No bootable device

(Suite de mon post)
En fouillant, je viens de tomber sur ce post de Crestey : http://forum.ubuntu-fr.org/viewtopic.ph … #p19682001
Peux-tu vérifier dans l'onglet "Security" de ton "Bios" si tu as une ligne "select an uefi file as trusted" comme sur cette vue extraite du post de Crestey ?
Si oui, il y sans doute une bonne chance de pouvoir maîtriser mieux ce foutu "Bios" et supprimer le besoin de passer par ALT+F10.

Hors ligne

#12 Le 24/06/2015, à 09:14

louisoquinn

Re : No bootable device

"Pourrais-tu donner un lien vers une page où on peut voir le modèle en question sur le site où il a été acheté ?"

Je me renseigne et je te donne ça dès que possible.

Concernant l'onglet "Security" du bios, j'ai en effet une ligne "select an uefi file as trusted" .


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#13 Le 24/06/2015, à 09:26

malbo

Re : No bootable device

louisoquinn a écrit :

Concernant l'onglet "Security" du bios, j'ai en effet une ligne "select an uefi file as trusted" .

Je pense que ce serait très utile que tu étudies toute la discussion initiée par Crestey : http://forum.ubuntu-fr.org/viewtopic.php?id=1825441
Tu verras qu'au départ il a galéré comme toi avec l'entrée "Unknown device", même s'il na pas eu besoin de recourir à ALT + F10. Seulement, à partir du moment où il a su utiliser "select an uefi file as trusted", tu peux constater qu'il a fait ce qu'il a voulu et au final (post #39 du fil), il ne s'est plus emmerdé avec une entrée "Unknown device" puisqu'il a obtenu ce paramétrage de son UEFI :

=================== efibootmgr -v
BootCurrent: 0001
Timeout: 2 seconds
BootOrder: 0001,0000,0002,2001,2002,2003
Boot0000* Windows Boot Manager	HD(2,12c800,96000,c161c34a-2619-4eb9-b173-6cbae9a870d6)File(EFIMicrosoftBootbootmgfw.efi)RC
Boot0001* shix64	ACPI(a0341d0,0)PCI(13,0)03120a00000000000000HD(2,12c800,96000,c161c34a-2619-4eb9-b173-6cbae9a870d6)File(EFIubuntushimx64.efi)A01 ..

dans lequel on peut voir (BootOrder) que le démarrage par défaut de l'ordi se fait sur l'entrée 0001 et cette entrée est une entrée créée de toute pièce par lui - à laquelle il a choisi de donner le nom "shix64" - qui pointe sur le fichier /EFI/ubuntu/shimx64.efi de la partition EFI. Comme tu as toi aussi ce fichier /EFI/ubuntu/shimx64.efi dans ta partition EFI (sda1) et qu'on sait que ce fichier est fonctionnel puisque tu démarres dessus actuellement, il n'y a aucune raison que tu n'y arrives pas.

Dernière modification par malbo (Le 24/06/2015, à 09:31)

Hors ligne

#14 Le 24/06/2015, à 09:30

louisoquinn

Re : No bootable device

J'étais justement en train de lire le topic. Eh bien je testerai ça ce soir ! Un grand merci pour ton aide et tes précisions.
big_smile


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#15 Le 24/06/2015, à 18:00

louisoquinn

Re : No bootable device

Ca fonctionne ! big_smile big_smile big_smile


PC Compaq, AMD Athlon II, 6GO RAM, Ubuntu 17.10

Hors ligne

#16 Le 25/06/2015, à 04:53

malbo

Re : No bootable device

Pour en faire profiter le peuple, je te prie de démarrer une session sur ton Ubuntu installé en passant par l'entrée que tu as créée avec "select an uefi file as trusted" et de faire un Boot-Info depuis cette même session. Tu donneras l'URL de ce Boot-Info dans ta réponse.
Peux-tu décrire en quelques lignes comment ça s'est passé pour renseigner "select an uefi file as trusted" ? Et est-ce que t'y es repris à plusieurs fois avant d'y arriver ou bien ça a marché du premier coup ?

Dernière modification par malbo (Le 25/06/2015, à 05:02)

Hors ligne