Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 11/02/2016, à 12:03

casp3r27200

Packard bell easynote TE69KB

Donc : La même ;p

Bonjour, (ce coup ci)
J'ai moi aussi Le "fameux"

Packard bell easynote TE69KB "series"
AMD dual 1.40Ghz E1-2500
AMD Radeon HD 8240
4 Gb DDR3
320 GB HDD

j'ai bon espoir que depuis le dernier post datant de 2014 une solution aie été trouvé depuis.
Quelqu’un aurait il une OS a me proposer afin de rejoindre les rangs de Linux et déserter les rangs Windows (8.1)
Inutile de préciser que ce sera une grande première alors soyez sympas avec moi.

Dernière modification par casp3r27200 (Le 11/02/2016, à 19:50)

#2 Le 11/02/2016, à 12:28

malbo

Re : Packard bell easynote TE69KB

Pour le lecteur qui passe, casp3r27200 a créé cette discussion suite à ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p21456107

@casp3r27200 : je te prie réaliser une LiveUSB Ubuntu 14.04.1 64 bits suivant cette recette : https://forum.ubuntu-fr.org/viewtopic.php?pid=16713311
Tu n'arriveras pas en principe à démarrer ton ordi sur cette LiveUSB parce que le démarrage est verrouillé sur Windows. Il sera nécessaire que tu crées un mot de passe superviseur dans le Bios puis que tu autorises l'utilisation de la touche F12 au démarrage (c'est un des paramètres du Bios). De base, si tu presses cette touche F12 au démarrage, il ne se passe rien mais quand tu auras fait cette activation de la touche F12, tu devrais pouvoir t'en servir pour accéder au Boot Menu au démarrage et sélectionner ta LiveUSB et démarrer dessus.
Tout ce que je viens d'expliquer, tu devrais pouvoir le faire sans désactiver "Secure Boot" (un des paramètres du Bios) mais je ne suis pas sûr de ça : j'ai cru comprendre que certains avaient dû désactiver "Secure Boot" sinon il était impossible d'autoriser l'utilisation de la touche F12. Tout ça n'est pas limpide mais c'est dur pour moi d'avoir des certitudes sur le mode opératoire parce qu'entre la mémoire qui flanche de ceux qui décrivent leur manip (qu'ils viennent pourtant juste de réaliser...), les problèmes de Hard, les LiveUSB qui ne fonctionnent pas, les firmware UEFI buggés, etc...je suis noyé - comme les autres aidants du forum - dans un bruit d'information qui n'aide pas à établir une procédure en béton.

Dernière modification par malbo (Le 11/02/2016, à 12:34)

Hors ligne

#3 Le 11/02/2016, à 15:07

casp3r27200

Re : Packard bell easynote TE69KB

la je vais passer pour un manche mais comment je fais le mot de passe superviseur bios ^^ (=>En fin de compte on s'en fou, pas besoin)

Dernière modification par casp3r27200 (Le 11/02/2016, à 20:46)

#4 Le 11/02/2016, à 15:53

malbo

Re : Packard bell easynote TE69KB

OK alors je vais t'indiquer ce post qui concerne le modèle packard bell easynote TE69CX donc ce n'est pas exactement ton modèle mais je pense que ce qui est indiqué doit pouvoir s'appliquer à ton cas : https://forum.ubuntu-fr.org/viewtopic.p … #p19591341
C'est cette partie du post :

pour rentrer dans le bios c'est la touche F2, pour changer le boot c'est le F12 mais elle est désactivée sur le bios avec le secure boot, donc sans effet.
Pour enlever le  secure boot, faut aller mettre un mot de passe dans le secure boot, et là on peut désactiver le secure boot. Si tu veux plus de détails je te fais un topo le plus détaillé possible.

Si on suit ce qui est mentionné là, il semblerait qu'il faut désactiver "Secure Boot" et pour cela, il faudrait mettre un mot de passe (j'ai noté dans mon post #2 qu'il fallait créer un "mot de passe superviseur" mais je ne suis pas certain que ce soit désigné comme ça mais en tout cas, il faut que tu crées un mot de passe dans le Bios sinon tu ne peux pas désactiver "Secure Boot" et tu ne peux pas activer l'utilisation de la touche F12

EDIT : un autre post qui concerne bien cette fois un modèle TE69KB : https://forum.ubuntu-fr.org/viewtopic.p … #p15574481
Il y est dit qu'il faut créer un mot de passe dans le "Bios" afin de pouvoir désactiver "Secure Boot"

Dernière modification par malbo (Le 12/02/2016, à 08:34)

Hors ligne

#5 Le 11/02/2016, à 17:22

casp3r27200

Re : Packard bell easynote TE69KB

Alors j'ai
Télécharger et installer Lili usb creator => ok
Télécharger ubuntu 14.04.1 64bit => ok (direct avec ton lien très pratique mais 3h en hotspot 110k/s....pfff)

Je machine tout le bazar selon mode d'emploi il y a un espace occupé sur la clé mais
En allant voir dessus (juste par curiosité) je vois que dale dessus "dossier vide" en gris.
Es ce normal je m'attendais a voir "des trucs" (=>ok, décocher toutes les options)

même si je sais qu'il faut faire tout le bazar bios pour démarrer dessus (=>voir post ci-dessous)

Et aussi si je bidouille le bios (dans la limite des indications bien-sure) et que je n'arrive pas a démarrer sur la clé mon Windows lui aura pas bouger je pourrais redémarrer dessus quand même.

car certaines info font flipper un novice du genre :

Ensuite il vous sera possible de booter sur un CD ou un DVD bootable, Malheureusement il ne vous sera plus possible de garder l'installation originale de Windows 8, qui entre nous est un bien fait tant cet OS est pourri. (sur: http://www.coyotus.com/viewtopic.php?id=788) (=>Des grosses conneries !!!)

t'en pense quoi ?

ça me ferais chier de cramer mon seul pc dispo du moment.

Dernière modification par casp3r27200 (Le 11/02/2016, à 20:31)

#6 Le 11/02/2016, à 17:45

malbo

Re : Packard bell easynote TE69KB

J'en pense rien. Cette andouille ne donne aucune explication et nous balance une vidéo dans une langue que je ne comprends pas.
Si tu flippes, je peux comprendre ça. Reviens nous voir quand tu seras dans une situation plus favorable.

Hors ligne

#7 Le 11/02/2016, à 20:06

casp3r27200

Re : Packard bell easynote TE69KB

Point d'évolution sans risques et la prudence n'a que rarement surpassé la curiosité chez moi

OK bon alors en pratique pour ce modèle:

accès bios avec le F2 (sans le bouton fn)
=> Accès bios/onglets "main" y a une option "F12 boot ..." en "disabled" on la met en "enabled"
=> F10 (save & exit)
=> Ça redémarre,
=> Donc on presse le F12 (toujours sans "fn")

Et "alelouya, alelouya ......"

On tombe sur le fameux menu select drive/Ubuntu test etc....
Et tout va bien au redémarrage si on touche a rien ça redémarre comme d’habitude.

Mais :

OS en anglais (passe encore mais confort pas top)
En clavier qwerty (ça par contre c'est vraiment chiant pour le coup) (=>"setxkbmap fr" dans "terminal")
Pas moyens de gratter la page de connexion hot spot, pas de problème niveau carte wifi =>gérer, réseau détecté et connecté mais pas moyen d'avoir le log orange ou free .......  (=>Être patient ...maintenant ça le fait, va savoir)
Es-ce-que c'est du a la version test live ou autre chose de particulier ?

En live USB je n'ai pas eu de problème particulier niveau lenteur, graphique ou périphérique sur :

- Ubuntu 14.04.1 64b,
- Ubuntu 14.04.3 64b
- Xubuntu 14.04.3 LTS 64b (pas mal pour les Windowsiens se rapproche d'un xp)

Le principe c'est que je peut tester un peu tout ceux que je veut en live USB ?
Xubuntu, Lubuntu, Linux mint (linuxmint-17.3-cinnamon-32bit non détecter) ou un peu n'importe  quoi ^^ je test et je vois non ^^ ?

ou je peut les trouver en direct comme le lien que tu m'as filer plus haut mais en liste genre ?
c'est bon je suis chaud pour les test ^^ prochaine étape l'installation et DÉGAGER Windows 8.1

Dernière modification par casp3r27200 (Le 12/02/2016, à 04:25)

#8 Le 11/02/2016, à 21:23

moko138

Re : Packard bell easynote TE69KB

Pour passer en azerty :
dans un terminal, taper au clavier :

setxkb,qp fr

en sorte de lire à l'écran :

setxkbmap fr

     Pour en savoir plus :
doc.ubuntu-fr.org/tutoriel/comprendre_la_configuration_du_clavier
  - -
l'agencement des claviers est stocké dans le fichier /etc/default/keyboard. Et une ligne comme :
XKBLAYOUT="fr,us"
active un clavier azerty et un clavier qwerty.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#9 Le 11/02/2016, à 21:50

casp3r27200

Re : Packard bell easynote TE69KB

L'initiation à la console .... cool ...... je crois ... ;p
Je vais tester je te dirais.
Et j'ai juste rien biter au doc ;p ;p
---------------------------------------------------PLUS TARD-----------------------------------------------
cela dit je suis en ce moment même sur mon ubuntu en live USB, sur le net en hotspot, la commande pour le clavier fr était "setxkbmap fr" tout a l'air de pas mal fonctionner je vais essayer d'en faire une avec mode persistant pour ne pas avoir l'OS en anglais et ne pas avoir a retaper ma config clavier a chaque fois ;p .... a suivre
--------------------------------------------ENCORE APRES-----------------------------------------------
je crois qu'en fait je vais devoir l'installer pour pouvoir l'avoir en français car sur live usb même persistant je n'arrive définitivement pas a avoir mon systeme en français même en allant dans "system settings"
- Je vais dans télécharger langue fr.....
- Il télécharge son truc......
- Passage terminal, il mouline....
- Ensuite il me dit que les changements seront appliqués au prochain log (ou plutôt un truc en anglais s'en approchant j'imagine).
- Je redemarre et ......... c'est pas français et je dois retaper la commande pour avoir mon azerty. (le bon coté c'est que maintenant, j'en connais au moins une par coeur ;p )

Après pas moyen d'utiliser thunderbird quand je tape mon mail il me dit "double-check this e-mail adress" ???

Alors j'ai un "vieux" DD USB Western digital 1Tb que j'ai formaté en "ex-Fat" (il me proposait que ça. ou NTFS=>pas bon).
Je peut l'installer dessus sans problème, sans toucher a mon "c:" et je le démarrerais avec F12.
De cette manière aurais-je enfin mon OS en français et mon azerty de manière permanente ?
j'attend après vous pour la suite wink

Dernière modification par casp3r27200 (Le 12/02/2016, à 02:46)

#10 Le 12/02/2016, à 08:42

malbo

Re : Packard bell easynote TE69KB

Pour qu'on puisse vérifier que ça devrait bien se passer, je te prie de faire un Boot-Info depuis une session live de Ubuntu 14.04.3 64bits (je t'avais proposé la version précédente 14.04.1 mais puisque tu as constaté que la version 14.04.3 tournait bien en session live dans ton ordi, je pense que c'est mieux de la retenir). Tu donneras l'URL de ce Boot-Info dans ta réponse.

EDIT : si tu as l'intention d'installer Xubuntu 14.04.3 64 bits plutôt que Ubuntu 14.04.3 64 bits, fais le Boot-Info depuis une session de Xubuntu 14.04.3 64 bits.

Dernière modification par malbo (Le 12/02/2016, à 08:46)

Hors ligne

#11 Le 12/02/2016, à 13:43

casp3r27200

Re : Packard bell easynote TE69KB

Ok alors ça nous donne :

http://paste.ubuntu.com/15023527/

#12 Le 12/02/2016, à 14:07

malbo

Re : Packard bell easynote TE69KB

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi 
                       /EFI/OEM/Boot/bootmgfw.efi /EFI/OEM/Boot/bootmgr.efi 
                       /EFI/OEM/Boot/memtest.efi

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 1979344 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 320.1 GB, 320072933376 bytes
256 heads, 63 sectors/track, 38761 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 4,294,967,295 4,294,967,295  ee GPT

/dev/sda1 ends after the last sector of /dev/sda

GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       821,247       819,200 Windows Recovery Environment (Windows)
/dev/sda2         821,248     1,435,647       614,400 EFI System partition
/dev/sda3       1,435,648     1,697,791       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4       1,697,792   590,620,671   588,922,880 Data partition (Windows/Linux)
/dev/sda5     590,620,672   625,141,759    34,521,088 Windows Recovery Environment (Windows)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             63    30,296,447    30,296,385   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        7E02A52D02A4EAFB                       ntfs       Recovery
/dev/sda2        FEA7-AC52                              vfat       ESP
/dev/sda4        062EA9962EA97F75                       ntfs       Packard Bell
/dev/sda5        8658ABB158AB9E85                       ntfs       Push Button Reset
/dev/sdb1        24CD-FD6C                              vfat       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Feb 12 12:27 ata-HL-DT-ST_DVDRAM_GU71N_KXBDAL81903 -> ../../sr0
lrwxrwxrwx 1 root root  9 Feb 12 12:38 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 12 12:38 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 12 12:27 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 12 12:27 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 12 12:39 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Feb 12 12:38 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Feb 12 12:38 usb-_USB_Flash_Memory_CC52AF4C82BDCD9124EB0305-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 12 12:27 usb-_USB_Flash_Memory_CC52AF4C82BDCD9124EB0305-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Feb 12 12:27 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Feb 12 12:38 wwn-0x50014ee6ae8572c7 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 12 12:38 wwn-0x50014ee6ae8572c7-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 12 12:27 wwn-0x50014ee6ae8572c7-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 12 12:27 wwn-0x50014ee6ae8572c7-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 12 12:39 wwn-0x50014ee6ae8572c7-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Feb 12 12:38 wwn-0x50014ee6ae8572c7-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Xubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Xubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/xubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/xubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/5172/mounts) leaked on lvs invocation. Parent PID 11437: bash
File descriptor 63 (pipe:[49880]) leaked on lvs invocation. Parent PID 11437: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-info 2016-02-12__12h38 ===================
boot-info version : 4ppa35
boot-sav version : 4ppa35
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa35
boot-info is executed in live-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="Recovery" UUID="7E02A52D02A4EAFB" TYPE="ntfs"
/dev/sda2: LABEL="ESP" UUID="FEA7-AC52" TYPE="vfat"
/dev/sda4: LABEL="Packard Bell" UUID="062EA9962EA97F75" TYPE="ntfs"
/dev/sda5: LABEL="Push Button Reset" UUID="8658ABB158AB9E85" TYPE="ntfs"
/dev/sdb1: UUID="24CD-FD6C" TYPE="vfat"


1 disks with OS, 1 OS : 0 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda4.

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi

=================== efibootmgr -v
BootCurrent: 0001
Timeout: 2 seconds
BootOrder: 0000,2001,2002,2003
Boot0000* Windows Boot Manager	HD(2,c8800,96000,9b0d19e3-eb41-41ad-a1fd-15ce8fb3931b)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* USB HDD: USB Flash Memory	ACPI(a0341d0,0)PCI(12,2)USB(1,0)HD(1,3f,1ce4941,2f002405)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD3200BPVT-2 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End    Size    File system  Name                          Flags
1      1049kB  420MB  419MB   ntfs         Basic data partition          hidden, diag
2      420MB   735MB  315MB   fat32        EFI system partition          boot
3      735MB   869MB  134MB                Microsoft reserved partition  msftres
4      869MB   302GB  302GB   ntfs         Basic data partition          msftdata
5      302GB   320GB  17.7GB  ntfs         Basic data partition          hidden, diag


Model:  USB Flash Memory (scsi)
Disk /dev/sdb: 15.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  15.5GB  15.5GB  primary  fat32        boot, lba

=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:4096:gpt:ATA WDC WD3200BPVT-2;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:735MB:315MB:fat32:EFI system partition:boot;
3:735MB:869MB:134MB::Microsoft reserved partition:msftres;
4:869MB:302GB:302GB:ntfs:Basic data partition:msftdata;
5:302GB:320GB:17.7GB:ntfs:Basic data partition:hidden, diag;

BYT;
/dev/sdb:15.5GB:scsi:512:512:msdos: USB Flash Memory;
1:32.3kB:15.5GB:15.5GB:fat32::boot, lba;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
sda   disk          298.1G
sda1  part ntfs       400M Recovery
sda2  part vfat       300M ESP
sda3  part            128M
sda4  part ntfs     280.8G Packard Bell
sda5  part ntfs      16.5G Push Button Reset
sdb   disk           14.5G
sdb1  part vfat      14.5G
sr0   rom            1024M
loop0 loop squashfs   908M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /mnt/boot-sav/sda2
sda3     1  0  0
sda4     1  0  0         /mnt/boot-sav/sda4
sda5     1  0  0         /mnt/boot-sav/sda5
sdb      1  0  1 running
sdb1     1  0  1         /cdrom
sr0      1  0  1 running
loop0    1  1  0         /rofs


=================== mount:
/cow on / type overlay (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=xubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type vfat (rw)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 input kfd kmsg log mapper mcelog media0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 7f 0c 00 00 00 00 00  |................|
00000030  55 85 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |U...............|
00000040  f6 00 00 00 01 00 00 00  fb ea a4 02 2d a5 02 7e  |............-..~|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 5e 1b  |.X.MSDOS5.0...^.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 0c 00  |........?.......|
00000020  00 60 09 00 51 02 00 00  00 00 00 00 02 00 00 00  |.`..Q...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 52 ac a7 fe 4e  4f 20 4e 41 4d 45 20 20  |..)R...NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 e8 19 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 3f 1a 23 00 00 00 00  |.........?.#....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  75 7f a9 2e 96 a9 2e 06  |........u.......|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 28 34 23  |........?....(4#|
00000020  00 00 00 00 80 00 80 00  ff bf 0e 02 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  85 9e ab 58 b1 ab 58 86  |...........X..X.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
/cow           overlay   1.7G  209M  1.5G  13% /
udev           devtmpfs  1.7G   12K  1.7G   1% /dev
tmpfs          tmpfs     333M  1.4M  332M   1% /run
/dev/sdb1      vfat       15G  951M   14G   7% /cdrom
/dev/loop0     squashfs  908M  908M     0 100% /rofs
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs     1.7G   12K  1.7G   1% /tmp
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.7G   80K  1.7G   1% /run/shm
none           tmpfs     100M   24K  100M   1% /run/user
/dev/sda1      fuseblk   400M  286M  115M  72% /mnt/boot-sav/sda1
/dev/sda2      vfat      296M   50M  247M  17% /mnt/boot-sav/sda2
/dev/sda4      fuseblk   281G  109G  173G  39% /mnt/boot-sav/sda4
/dev/sda5      fuseblk    17G   15G  2.0G  89% /mnt/boot-sav/sda5

=================== fdisk -l:

Disk /dev/sda: 320.1 GB, 320072933376 bytes
256 heads, 63 sectors/track, 38761 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x324cd8b6

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  4294967295  2147483647+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2f002405

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          63    30296447    15148192+   c  W95 FAT32 (LBA)


No OS or WinEFI system
gui-tab-other.sh: line 94: _checkbutton_repairfilesystems: command not found


=================== Suggested repair
The default repair of the Boot-Repair utility would not act on the MBR.
Additional repair would be performed:  repair-filesystems  fix-windows-boot


=================== User settings
The settings chosen by the user will not act on the boot.

Tout est parfait en vue de l'installation dans ton ""vieux" DD USB Western digital 1Tb". Je te recommande une seule chose : ne pas utiliser les choix d'installation automatiques qui sont proposés lors de l'installation : il faut choisir "Autre chose" à l'étape Type d'installation et faire l'installation en "manuel" à l'aide de la doc
Tu n'auras pas à créer de partition EFI : la partition EFI (sda2) qui se trouve sur ton disque dur "Windows" sera utilisée automatiquement par l'installateur pour y installer ce qui est nécessaire au démarrage.
Tu n'as pas à sélectionner quoi que ce soit dans le champ "Périphérique où sera installé le programme de démarrage" (en bas de la fenêtre) parce que ce que tu sélectionnerais ne sera pas utilisé (ce champ n'est pas "lu" par l'installateur dans le cas d'une installation en mode EFI). En somme, tu t'occupes juste de créer une partition racine et une partition swap (et éventuellement une partition /home mais c'est facultatif).
A noter pour le type de table de partitionnement de ton "vieux" DD USB Western digital : il peut être indifféremment du type MSDOS ou du type GPT. Cela n'intervient pas dans le mode de démarrage parce que l'ordi démarre sur la partition EFI qui se trouve sur le disque Windows. Et le chargeur d'amorçage de Grub qui se trouvera sur cette partition EFI se débrouillera quelque soit le type.

Dernière modification par malbo (Le 12/02/2016, à 14:18)

Hors ligne

#13 Le 12/02/2016, à 14:25

casp3r27200

Re : Packard bell easynote TE69KB

ok donc je fais une partition que j'apelle
"racine" ou "/"
"swap" et
"/home"

petit detail peut etre important le DD WD 1tb était pas branché au moment du boot sa change quelque chose ou pas ?

Dernière modification par casp3r27200 (Le 12/02/2016, à 14:27)

#14 Le 12/02/2016, à 14:30

malbo

Re : Packard bell easynote TE69KB

casp3r27200 a écrit :

ok donc je fais une partition que j'apelle
"racine" ou "/"
"swap" et
"/home"

Non, tu ne les "appelles" pas. Au lieu d'écrire des conneries, lis la doc que je t'ai indiquée, cherche à comprendre et pose ensuite tes questions.

Hors ligne

#15 Le 12/02/2016, à 14:56

casp3r27200

Re : Packard bell easynote TE69KB

t'enerve pas, je suis pas informaticien, je lis j'essaye de comprendre mais bon je debarque a peine dans tout ça.
Imagine que tu te retrouve exiler en chine meme avec un plan de la ville pas sur que tu trouve la ou tu veut aller

#16 Le 12/02/2016, à 15:27

casp3r27200

Re : Packard bell easynote TE69KB

Bon effectivement on les "apelle" pas ;p c'est type et point de montage bon rien ne vaut la pratique ça mouline on verra ce que ça donne j'ai suivi les instructions ça a ressembler a ce que ça devais on va voir

#17 Le 12/02/2016, à 16:40

malbo

Re : Packard bell easynote TE69KB

Quand tu auras fait l'installation de Ubuntu, il est très probable que le redémarrage par défaut de l'ordi se fasse sur Windows. Il faudra que tu presses la touche F12 au démarrage pour pouvoir sélectionner ubuntu et faire apparaître le menu Grub.

Dernière modification par malbo (Le 12/02/2016, à 16:41)

Hors ligne

#18 Le 12/02/2016, à 17:21

casp3r27200

Re : Packard bell easynote TE69KB

Tant mieux démarrage F12 me vas très bien

CA MARCHE PAS GRRRR

Je suis sur ma live USB je clique sur l'installation
je fais autre, le partitionnement (ça c'est compris)
les options suivantes et tout ...... ça demarre
il télécharge les fichiers=>ok
télécharge paquets langue =>ok
les installe => ok
télécharge autres paquets => ok
install => et a 66-75% de la barre bleu à "instal grub"
sa plante fenêtre grise

le paquet grub-efi-amd64-signed n'a pas pu être installer dans /target/. en l'absence du programme de démarrage grub......ça marcheras pas

donc es-ce que c'est du à ma connexion internet (hotspot à la con qui réinitialise sans cesse) et dans ce cas j'attendrais de pouvoir me brancher en Ethernet et je suis marron.

ou c'est tout autre chose de technique encore

................j'y croyais cette fois, c'était bien parti .................

Dernière modification par casp3r27200 (Le 12/02/2016, à 17:28)

#19 Le 12/02/2016, à 18:02

malbo

Re : Packard bell easynote TE69KB

casp3r27200 a écrit :

le paquet grub-efi-amd64-signed n'a pas pu être installer dans /target/. en l'absence du programme de démarrage grub......ça marcheras pas

C'est rageant. Il s'agit de l'opération de création du chargeur d'amorçage de Grub dans la partition EFI (sda2) qui ne peut pas se faire. Je ne pense pas que ce soit à cause de ta liaison internet chaotique. Pour que je puisse investiguer un peu, je te prie de laisser ton DD WD 1tb branché cette fois-ci, et faire un Boot-Info depuis une session live et en donner l'URL dans ta réponse.

Dernière modification par malbo (Le 12/02/2016, à 18:04)

Hors ligne

#20 Le 12/02/2016, à 18:19

casp3r27200

Re : Packard bell easynote TE69KB

COMMENT JE LUI AI NIQUER SA GUEULE  AAAAAH

c'était a cause de la conexion internet on dirais car j'ai lancer l'installation sans conexion

option 1 : desinstaller et reinstaller unbuntu 14.4.03 LTS
apres au passage télécharger les mise a jour etc ... il a pas déceler de conexion alors il m'a installer sans et ça a marcher nikel et 3 fois plus vite qu'au premier coup, en français et avec la bonne config clavier ;p
démarrage en F12 comme prévu tout va bien suis content
me voila converti au Linuxisme ;p
Reste a apprendre a maitriser cet OS et accessoirement quelque maj au compte goutte me prendre vlc etc ... des conneries quoi
Merci a toi pour l'aide même si j'ai put etre un peu gonflant pour un pros ;p

#21 Le 12/02/2016, à 18:26

casp3r27200

Re : Packard bell easynote TE69KB

je voulais t'en faire un avec le systeme installer mais ça veut pas on dirrais:

xubuntu@xubuntu-EasyNote-TE69KB:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
[sudo] password for xubuntu: 
 Simple tool to repair frequent boot problems.

Website: [url]https://sourceforge.net/p/boot-repair/home[/url]
 Plus d’info : [url]https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair[/url]
Appuyez sur [ENTRÉE] pour continuer ou Ctrl-C pour annuler l’ajout

gpg: le porte-clefs « /tmp/tmp8s7nrxtr/secring.gpg » a été créé
gpg: le porte-clefs « /tmp/tmp8s7nrxtr/pubring.gpg » a été créé
gpg: demande de la clef 60D8DA0B sur le serveur hkp keyserver.ubuntu.com
gpg: /tmp/tmp8s7nrxtr/trustdb.gpg : base de confiance créée
gpg: clef 60D8DA0B : clef publique « Launchpad PPA for YannUbuntu » importée
gpg: Quantité totale traitée : 1
gpg:               importées : 1  (RSA: 1)
OK
xubuntu@xubuntu-EasyNote-TE69KB:~$ sudo apt-get update
E: Impossible d'obtenir le verrou /var/lib/apt/lists/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire /var/lib/apt/lists/
xubuntu@xubuntu-EasyNote-TE69KB:~$ sudo apt-get update
E: Impossible d'obtenir le verrou /var/lib/apt/lists/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire /var/lib/apt/lists/

ou peut etre faut-il que je sois en live pour le faire ? si tu le veut toujours pour .......... je sais pas c'est toi qui voi


Modération : merci à l'avenir d'utiliser les balises code (explications ici).

oki merci de l'info je me demandais justement pourquoi c'était pas comme ça wink

Dernière modification par casp3r27200 (Le 12/02/2016, à 19:10)

#22 Le 12/02/2016, à 19:16

malbo

Re : Packard bell easynote TE69KB

Moi ça m'intéresse énormément d'avoir un Boot-Info réalisé depuis une session de ton Ubuntu installé mais il faut que la connexion internet soit établie sinon tu ne peux pas obtenir l'URL (c'est cette doc qu'il faut suivre)

Hors ligne

#23 Le 12/02/2016, à 19:22

casp3r27200

Re : Packard bell easynote TE69KB

pareil il me met ça se coup ci a l'etape "recharger la liste des paquets"

xubuntu@xubuntu-EasyNote-TE69KB:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
[sudo] password for xubuntu: 
 Simple tool to repair frequent boot problems.

Website: https://sourceforge.net/p/boot-repair/home
 Plus d’info : https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair
Appuyez sur [ENTRÉE] pour continuer ou Ctrl-C pour annuler l’ajout

gpg: le porte-clefs « /tmp/tmpbarw3zui/secring.gpg » a été créé
gpg: le porte-clefs « /tmp/tmpbarw3zui/pubring.gpg » a été créé
gpg: demande de la clef 60D8DA0B sur le serveur hkp keyserver.ubuntu.com
gpg: /tmp/tmpbarw3zui/trustdb.gpg : base de confiance créée
gpg: clef 60D8DA0B : clef publique « Launchpad PPA for YannUbuntu » importée
gpg: Quantité totale traitée : 1
gpg:               importées : 1  (RSA: 1)
OK
xubuntu@xubuntu-EasyNote-TE69KB:~$ sudo apt-get update
E: Impossible d'obtenir le verrou /var/lib/apt/lists/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire /var/lib/apt/lists/
E: Impossible d'obtenir le verrou /var/lib/dpkg/lock - open (11: Ressource temporairement non disponible)
E: Impossible de verrouiller le répertoire d'administration (/var/lib/dpkg/). Il est possible qu'un autre processus l'utilise.

peut etre parce ce que je suis en pleine MAJ
toujours sur mon hotspot donc sa traine (normal) mais sa tourne
Je réessayerais après la maj voir donc
je reprendrais direct a "recharger la liste des paquets" car " Ajouter à vos sources de logiciels le PPA" lui c'est passé sans problèmes ?

Dernière modification par casp3r27200 (Le 12/02/2016, à 19:34)

#24 Le 12/02/2016, à 19:30

malbo

Re : Packard bell easynote TE69KB

Bon. Tu le feras quand tu pourras le Boot-Info. Tu t'en es bien sorti quand même. Félicitations.

Hors ligne

#25 Le 12/02/2016, à 20:22

casp3r27200

Re : Packard bell easynote TE69KB

Voilà après :
Installation sans réseau/ MAJ / Redémarrage / Boot-info :

Ubuntu Pastebin
Paste from boot-repair at Fri, 12 Feb 2016 18:16:13 +0000
Download as text
 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 9Feb2015]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Windows 2000/XP/2003 is installed in the MBR of /dev/sdb.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi 
                       /EFI/OEM/Boot/bootmgfw.efi /EFI/OEM/Boot/bootmgr.efi 
                       /EFI/OEM/Boot/memtest.efi

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.3 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 1979344 of /dev/sdc1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 320.1 GB, 320072933376 bytes
256 heads, 63 sectors/track, 38761 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 4,294,967,295 4,294,967,295  ee GPT

/dev/sda1 ends after the last sector of /dev/sda

GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       821,247       819,200 Windows Recovery Environment (Windows)
/dev/sda2         821,248     1,435,647       614,400 EFI System partition
/dev/sda3       1,435,648     1,697,791       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4       1,697,792   590,620,671   588,922,880 Data partition (Windows/Linux)
/dev/sda5     590,620,672   625,141,759    34,521,088 Windows Recovery Environment (Windows)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 1000.2 GB, 1000170586112 bytes
255 heads, 63 sectors/track, 121597 cylinders, total 1953458176 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *     31,248,384 1,953,456,127 1,922,207,744  83 Linux
/dev/sdb2          15,626,238    31,248,383    15,622,146   5 Extended
/dev/sdb5          15,626,240    31,248,383    15,622,144  82 Linux swap / Solaris


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *             63    30,296,447    30,296,385   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        7E02A52D02A4EAFB                       ntfs       Recovery
/dev/sda2        FEA7-AC52                              vfat       ESP
/dev/sda4        062EA9962EA97F75                       ntfs       Packard Bell
/dev/sda5        8658ABB158AB9E85                       ntfs       Push Button Reset
/dev/sdb1        28891570-2a1f-4165-8c25-07690156ece2   ext4       
/dev/sdb5        71a7c76f-deeb-42d6-a0bd-c7cd0f6a9c20   swap       
/dev/sdc1        24CD-FD6C                              vfat       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Feb 12  2016 ata-HL-DT-ST_DVDRAM_GU71N_KXBDAL81903 -> ../../sr0
lrwxrwxrwx 1 root root  9 Feb 12  2016 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 12  2016 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 12  2016 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 12  2016 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 12  2016 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Feb 12  2016 ata-WDC_WD3200BPVT-22JJ5T0_WD-WX81A7377282-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Feb 12 19:15 usb-WD_My_Passport_0748_575834314537324435393937-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 12  2016 usb-WD_My_Passport_0748_575834314537324435393937-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Feb 12  2016 usb-WD_My_Passport_0748_575834314537324435393937-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Feb 12  2016 usb-WD_My_Passport_0748_575834314537324435393937-0:0-part5 -> ../../sdb5
lrwxrwxrwx 1 root root  9 Feb 12  2016 usb-_USB_Flash_Memory_CC52AF4C82BDCD9124EB0305-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Feb 12  2016 usb-_USB_Flash_Memory_CC52AF4C82BDCD9124EB0305-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Feb 12  2016 wwn-0x5001480000000000 -> ../../sr0
lrwxrwxrwx 1 root root  9 Feb 12  2016 wwn-0x50014ee6ae8572c7 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 12  2016 wwn-0x50014ee6ae8572c7-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 12  2016 wwn-0x50014ee6ae8572c7-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 12  2016 wwn-0x50014ee6ae8572c7-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 12  2016 wwn-0x50014ee6ae8572c7-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Feb 12  2016 wwn-0x50014ee6ae8572c7-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda2        /boot/efi                vfat       (rw)
/dev/sdb1        /                        ext4       (rw,errors=remount-ro)


=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  28891570-2a1f-4165-8c25-07690156ece2
else
  search --no-floppy --fs-uuid --set=root 28891570-2a1f-4165-8c25-07690156ece2
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-28891570-2a1f-4165-8c25-07690156ece2' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  28891570-2a1f-4165-8c25-07690156ece2
	else
	  search --no-floppy --fs-uuid --set=root 28891570-2a1f-4165-8c25-07690156ece2
	fi
	linux	/boot/vmlinuz-3.19.0-49-generic.efi.signed root=UUID=28891570-2a1f-4165-8c25-07690156ece2 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.19.0-49-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-28891570-2a1f-4165-8c25-07690156ece2' {
	menuentry 'Ubuntu, avec Linux 3.19.0-49-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-49-generic-advanced-28891570-2a1f-4165-8c25-07690156ece2' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  28891570-2a1f-4165-8c25-07690156ece2
		else
		  search --no-floppy --fs-uuid --set=root 28891570-2a1f-4165-8c25-07690156ece2
		fi
		echo	'Chargement de Linux 3.19.0-49-generic…'
		linux	/boot/vmlinuz-3.19.0-49-generic.efi.signed root=UUID=28891570-2a1f-4165-8c25-07690156ece2 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.19.0-49-generic
	}
	menuentry 'Ubuntu, with Linux 3.19.0-49-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-49-generic-recovery-28891570-2a1f-4165-8c25-07690156ece2' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  28891570-2a1f-4165-8c25-07690156ece2
		else
		  search --no-floppy --fs-uuid --set=root 28891570-2a1f-4165-8c25-07690156ece2
		fi
		echo	'Chargement de Linux 3.19.0-49-generic…'
		linux	/boot/vmlinuz-3.19.0-49-generic.efi.signed root=UUID=28891570-2a1f-4165-8c25-07690156ece2 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.19.0-49-generic
	}
	menuentry 'Ubuntu, avec Linux 3.19.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-advanced-28891570-2a1f-4165-8c25-07690156ece2' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  28891570-2a1f-4165-8c25-07690156ece2
		else
		  search --no-floppy --fs-uuid --set=root 28891570-2a1f-4165-8c25-07690156ece2
		fi
		echo	'Chargement de Linux 3.19.0-25-generic…'
		linux	/boot/vmlinuz-3.19.0-25-generic.efi.signed root=UUID=28891570-2a1f-4165-8c25-07690156ece2 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.19.0-25-generic
	}
	menuentry 'Ubuntu, with Linux 3.19.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.19.0-25-generic-recovery-28891570-2a1f-4165-8c25-07690156ece2' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  28891570-2a1f-4165-8c25-07690156ece2
		else
		  search --no-floppy --fs-uuid --set=root 28891570-2a1f-4165-8c25-07690156ece2
		fi
		echo	'Chargement de Linux 3.19.0-25-generic…'
		linux	/boot/vmlinuz-3.19.0-25-generic.efi.signed root=UUID=28891570-2a1f-4165-8c25-07690156ece2 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.19.0-25-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-FEA7-AC52' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  FEA7-AC52
	else
	  search --no-floppy --fs-uuid --set=root FEA7-AC52
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=28891570-2a1f-4165-8c25-07690156ece2 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sdc2 during installation
UUID=FEA7-AC52  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda5 during installation
UUID=71a7c76f-deeb-42d6-a0bd-c7cd0f6a9c20 none            swap    sw              0       0
--------------------------------------------------------------------------------

=========================== sdc1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Xubuntu without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Xubuntu" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/xubuntu.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/xubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdc1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sdb2

00000000  8e 16 00 9c 2b eb 0d 8f  97 8b 84 87 f3 94 d2 51  |....+..........Q|
00000010  3c 4d 8a 22 65 8c 06 89  c0 41 bc a6 e0 5e 40 42  |<M."e....A...^@B|
00000020  58 8b e7 5d 42 15 4f 58  df 3c 9a 63 da 19 e1 4f  |X..]B.OX.<.c...O|
00000030  d3 80 29 66 c0 bd 87 bb  c8 e3 b6 8c 29 78 a6 6c  |..)f........)x.l|
00000040  9e 44 cc 23 77 a4 c4 bf  7f 05 47 53 e1 8d d3 ae  |.D.#w.....GS....|
00000050  26 0e 89 96 95 ba fe 14  8b 17 24 b2 2b 5a 8f 27  |&.........$.+Z.'|
00000060  e8 c0 c3 33 95 e0 10 04  08 67 21 d6 b9 bf 31 9f  |...3.....g!...1.|
00000070  0e 90 7d 9a 1f 00 4b 1e  8e 21 2c ed ae 0f c1 a8  |..}...K..!,.....|
00000080  e3 dd f0 0c 40 05 54 c0  eb 71 a1 d0 8e 4e 20 a7  |....@.T..q...N .|
00000090  19 e0 43 b0 39 f9 a6 29  e1 05 c5 d6 58 de 79 31  |..C.9..)....X.y1|
000000a0  ef 45 63 52 0a d1 5f 08  9f 83 89 e2 b1 6a 19 da  |.EcR.._......j..|
000000b0  e6 34 50 95 3c 0e 05 d3  06 c6 20 77 cf 86 4a 3a  |.4P.<..... w..J:|
000000c0  6e 07 6f fd 89 17 5a f1  37 d1 2a 99 69 ca 6a 00  |n.o...Z.7.*.i.j.|
000000d0  b2 9b 80 92 ef 70 b7 08  fa c5 63 ac 43 02 80 1f  |.....p....c.C...|
000000e0  9d d9 82 e4 69 4c 49 de  c3 90 aa 51 2a 31 56 88  |....iLI....Q*1V.|
000000f0  72 68 25 fc f0 93 8b ec  65 00 53 c8 05 52 0b 61  |rh%.....e.S..R.a|
00000100  76 ce 3c 2b 89 35 43 6e  5d 86 36 53 1f d6 16 28  |v.<+.5Cn].6S...(|
00000110  de db 51 af aa 4b 56 d5  57 bb 55 2c 8b b0 ed a1  |..Q..KV.W.U,....|
00000120  76 a1 37 05 00 54 a4 99  eb a4 cc 36 80 3d d1 81  |v.7..T.....6.=..|
00000130  dc 41 02 82 3e 14 78 cb  c1 25 7a 4c 3c 20 49 52  |.A..>.x..%zL< IR|
00000140  a7 01 cd 7c 60 8a 62 e7  e6 6e 0b 4c bd 54 45 3e  |...|`.b..n.L.TE>|
00000150  e9 58 8c d9 eb a8 9a 29  44 02 7e 92 04 3c 00 12  |.X.....)D.~..<..|
00000160  99 cd ef 9b bf e8 f3 39  5a 50 a8 0c 39 4b 09 3e  |.......9ZP..9K.>|
00000170  05 7f d2 09 24 82 8a f9  2d 34 66 23 25 44 fd 3e  |....$...-4f#%D.>|
00000180  e9 e1 f0 1e 5d 1e 94 32  f6 2a e8 3e 85 00 81 4f  |....]..2.*.>...O|
00000190  d9 43 18 78 10 92 ad 34  0d 7f 82 61 7a aa 42 6d  |.C.x...4...az.Bm|
000001a0  4d b2 1a 42 62 be 05 59  c7 00 50 f2 4d 9d 70 b7  |M..Bb..Y..P.M.p.|
000001b0  91 41 69 d3 16 b8 b2 3d  60 0f ba d9 43 fd 00 af  |.Ai....=`...C...|
000001c0  e4 cc 82 fe ff ff 02 00  00 00 00 60 ee 00 00 00  |...........`....|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200



ADDITIONAL INFORMATION :
=================== log of boot-info 2016-02-12__19h15 ===================
boot-info version : 4ppa35
boot-sav version : 4ppa35
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa35
boot-info is executed in installed-session (Ubuntu 14.04.3 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.19.0-49-generic.efi.signed root=UUID=28891570-2a1f-4165-8c25-07690156ece2 ro quiet splash vt.handoff=7

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/disk/by-uuid/28891570-2a1f-4165-8c25-07690156ece2:L'OS actuellement utilisé - Ubuntu 14.04.3 LTS CurrentSession:linux
/dev/sda2@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi

=================== blkid:
/dev/sda1: LABEL="Recovery" UUID="7E02A52D02A4EAFB" TYPE="ntfs"
/dev/sda2: LABEL="ESP" UUID="FEA7-AC52" TYPE="vfat"
/dev/sda4: LABEL="Packard Bell" UUID="062EA9962EA97F75" TYPE="ntfs"
/dev/sda5: LABEL="Push Button Reset" UUID="8658ABB158AB9E85" TYPE="ntfs"
/dev/sdb1: UUID="28891570-2a1f-4165-8c25-07690156ece2" TYPE="ext4"
/dev/sdb5: UUID="71a7c76f-deeb-42d6-a0bd-c7cd0f6a9c20" TYPE="swap"
/dev/sdc1: UUID="24CD-FD6C" TYPE="vfat"

disk/by-uuid/28891570-2a1f-4165-8c25-07690156ece2 (sda) has unknown type. Veuillez indiquer ce message à boot.repair@gmail.com

1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda4.
Linux not detected by os-prober on sdb1. Veuillez indiquer ce message à boot.repair@gmail.com

Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sda ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.

Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi

=================== //etc/grub.d/ :
drwxr-xr-x  2 root root     4096 févr. 12  2016 grub.d
total 76
-rwxr-xr-x 1 root root  9791 déc.  17 16:00 00_header
-rwxr-xr-x 1 root root  6058 mai   13  2015 05_debian_theme
-rwxr-xr-x 1 root root 11608 juin  26  2015 10_linux
-rwxr-xr-x 1 root root 10412 juin  26  2015 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  26  2015 30_os-prober
-rwxr-xr-x 1 root root  1416 juin  26  2015 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  26  2015 40_custom
-rwxr-xr-x 1 root root   216 juin  26  2015 41_custom
-rw-r--r-- 1 root root   483 juin  26  2015 README




=================== //etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sdb1: UUID=FEA7-AC52   (sda2)
=================== No kernel in /mnt/boot-sav/sdc1/boot:
grub



=================== efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0000,0002,0003,2001,2002,2003
Boot0000* Windows Boot Manager	HD(2,c8800,96000,9b0d19e3-eb41-41ad-a1fd-15ce8fb3931b)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* USB HDD: USB Flash Memory	ACPI(a0341d0,0)PCI(12,2)USB(1,0)HD(1,3f,1ce4941,2f002405)RC
Boot0002* ubuntu	HD(2,c8800,96000,9b0d19e3-eb41-41ad-a1fd-15ce8fb3931b)File(EFIubuntushimx64.efi)
Boot0003* HDD0: 	HD(2,c8800,96000,9b0d19e3-eb41-41ad-a1fd-15ce8fb3931b)File(EFIubuntugrubx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.
sdb1	: sdb,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdc1.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	usb-disk,	has-os,	2048 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	liveusb,	no-os,	63 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD3200BPVT-2 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End    Size    File system  Name                          Flags
1      1049kB  420MB  419MB   ntfs         Basic data partition          hidden, diag
2      420MB   735MB  315MB   fat32        EFI system partition          boot
3      735MB   869MB  134MB                Microsoft reserved partition  msftres
4      869MB   302GB  302GB   ntfs         Basic data partition          msftdata
5      302GB   320GB  17.7GB  ntfs         Basic data partition          hidden, diag


Model: WD My Passport 0748 (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
2      8001MB  16.0GB  7999MB  extended
5      8001MB  16.0GB  7999MB  logical   linux-swap(v1)
1      16.0GB  1000GB  984GB   primary   ext4            boot


Model:  USB Flash Memory (scsi)
Disk /dev/sdc: 15.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  15.5GB  15.5GB  primary  fat32        boot, lba

=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:4096:gpt:ATA WDC WD3200BPVT-2;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:735MB:315MB:fat32:EFI system partition:boot;
3:735MB:869MB:134MB::Microsoft reserved partition:msftres;
4:869MB:302GB:302GB:ntfs:Basic data partition:msftdata;
5:302GB:320GB:17.7GB:ntfs:Basic data partition:hidden, diag;

BYT;
/dev/sdb:1000GB:scsi:512:512:msdos:WD My Passport 0748;
2:8001MB:16.0GB:7999MB:::;
5:8001MB:16.0GB:7999MB:linux-swap(v1)::;
1:16.0GB:1000GB:984GB:ext4::boot;

BYT;
/dev/sdc:15.5GB:scsi:512:512:msdos: USB Flash Memory;
1:32.3kB:15.5GB:15.5GB:fat32::boot, lba;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        298,1G
sda1  part ntfs     400M Recovery
sda2  part vfat     300M ESP
sda3  part          128M
sda4  part ntfs   280,8G Packard Bell
sda5  part ntfs    16,5G Push Button Reset
sdb   disk        931,5G
sdb1  part ext4   916,6G
sdb2  part            1K
sdb5  part swap     7,5G
sdc   disk         14,5G
sdc1  part vfat    14,5G
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /boot/efi
sda3     1  0  0
sda4     1  0  0         /mnt/boot-sav/sda4
sda5     1  0  0         /mnt/boot-sav/sda5
sdb      1  0  0 running
sdb1     1  0  0         /
sdb2     1  0  0
sdb5     1  0  0         [SWAP]
sdc      1  0  1 running
sdc1     1  0  1         /mnt/boot-sav/sdc1
sr0      1  0  1 running


=================== mount:
/dev/sdb1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda2 on /boot/efi type vfat (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=xubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdc1 on /mnt/boot-sav/sdc1 type vfat (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb5 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 input kfd kmsg log mapper mcelog media0 mem memory_bandwidth net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sdb sdb1 sdb2 sdb5 sdc sdc1 sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 7f 0c 00 00 00 00 00  |................|
00000030  55 85 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |U...............|
00000040  f6 00 00 00 01 00 00 00  fb ea a4 02 2d a5 02 7e  |............-..~|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 5e 1b  |.X.MSDOS5.0...^.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 0c 00  |........?.......|
00000020  00 60 09 00 51 02 00 00  00 00 00 00 02 00 00 00  |.`..Q...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 52 ac a7 fe 4e  4f 20 4e 41 4d 45 20 20  |..)R...NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 e8 19 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 3f 1a 23 00 00 00 00  |.........?.#....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  75 7f a9 2e 96 a9 2e 06  |........u.......|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 28 34 23  |........?....(4#|
00000020  00 00 00 00 80 00 80 00  ff bf 0e 02 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  85 9e ab 58 b1 ab 58 86  |...........X..X.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200
ls sdc1/efi: /BOOT/grubx64.efi /BOOT/BOOTx64.EFI
ls sdc1: boot
casper
dists
EFI
install
ldlinux.sys
md5sum.txt
pics
pool
preseed
README.diskdefines
Remove_LiLi.bat
SmartClean.ini
syslinux
System Volume Information  . Veuillez indiquer ce message à boot.repair@gmail.com
ls /boot/efi/efi : Boot
Microsoft
OEM
ubuntu
Error efitmp. Veuillez indiquer ce message à boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sdc1
00000000  eb 58 90 53 59 53 4c 49  4e 55 58 00 02 10 8c 0c  |.X.SYSLINUX.....|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  41 49 ce 01 ba 39 00 00  00 00 00 00 02 00 00 00  |AI...9..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 6c fd cd 24 4e  4f 20 4e 41 4d 45 20 20  |..)l..$NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |  FAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 d0 33 1e 00 66 ba  |.t...F}.f..3..f.|
00000120  00 00 00 00 bb 00 7e e8  0e 00 66 81 3e 1c 7e cf  |......~...f.>.~.|
00000130  ae 1e 73 75 74 e9 f8 00  66 03 06 60 7b 66 13 16  |..sut...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.7G   12K  1.7G   1% /dev
tmpfs          tmpfs     333M  1.4M  332M   1% /run
/dev/sdb1      ext4      903G  3.8G  853G   1% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.7G   84K  1.7G   1% /run/shm
none           tmpfs     100M   28K  100M   1% /run/user
/dev/sda2      vfat      296M   54M  243M  19% /boot/efi
/dev/sda1      fuseblk   400M  286M  115M  72% /mnt/boot-sav/sda1
/dev/sda4      fuseblk   281G  109G  173G  39% /mnt/boot-sav/sda4
/dev/sda5      fuseblk    17G   15G  2.0G  89% /mnt/boot-sav/sda5
/dev/sdc1      vfat       15G  951M   14G   7% /mnt/boot-sav/sdc1

=================== fdisk -l:

Disk /dev/sda: 320.1 GB, 320072933376 bytes
256 heads, 63 sectors/track, 38761 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x324cd8b6

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  4294967295  2147483647+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 1000.2 GB, 1000170586112 bytes
255 heads, 63 sectors/track, 121597 cylinders, total 1953458176 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00023f15

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *    31248384  1953456127   961103872   83  Linux
/dev/sdb2        15626238    31248383     7811073    5  Extended
/dev/sdb5        15626240    31248383     7811072   82  Linux swap / Solaris

Partition table entries are not in disk order

Disk /dev/sdc: 15.5 GB, 15512174592 bytes
32 heads, 63 sectors/track, 15028 cylinders, total 30297216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2f002405

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          63    30296447    15148192+   c  W95 FAT32 (LBA)




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sdb1, using the following options:        sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot use-standard-efi-file


=================== Blockers in case of suggested repair
Veuillez utiliser ce logiciel dans une session-live (live-CD ou live-USB). Cela vous permettra d'utiliser cette fonctionnalité.


=================== Advice in case of suggested repair
Veuillez désactiver SecureBoot dans le BIOS. Puis réessayez.Voulez-vous continuer ?


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sdb (1000GB) !

Les fichiers de démarrage de [Linux] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)

Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi


=================== User settings
The settings chosen by the user will not act on the boot.

Download as text

Dernière modification par casp3r27200 (Le 12/02/2016, à 20:27)