#1 Le 13/02/2016, à 18:12
- Croa
Instabilité machine, tags & démarrages laborieux. [Résolu]
Bonjour,
Mon système a été rénové : Carte principale AM1B-M de chez ASRock plus carte graphique additionnelle NVIDIA (afin de pouvoir visionner aussi sur la télé ; Le moniteur principal est un peu spécial : VGA plat 1280x768.) Nouveau disque dur pas cher Thoshiba 500Go SATA (les disques IDE ne se connectent plus aux cartes récentes).
Mon OS est Ubuntu 14.04.3 LTS avec interface graphique de travail xfce4. Le noyau de service est Linux3.19.0-47-generic, j'ai aussi le 3.19.0-49 installé mais inutilisable avec xfce (souris se bloque), le 3.19.0-43 et un autre plus anciens en secours. Tous les noyaux ont le même problème d'instabilité.
Voilà : Si je quitte la session graphique ( «Ctrl»+«Alt»+«F1») je tombe sur un défilement de tags de 4 ou 5 lignes avec des DRDY ERR. La console est évidemment inutilisable... Sauf à savoir lancer des commandes par cœur sans la moindre faute ! Or la console est le système de secours de Linux ! 
- Les démarrages sont extrêmement lents et laborieux : presque 8 mn ! Là encore présence de tags DRDY ERR en mode texte sauf qu'en mode graphique (l'écran bleu Xubuntu avec une chenille qui tourne) le démarrage est aussi long et laborieux.
- J'ai vérifié le disque dur qui est nickel. J'ai essayé de désactiver SMART dans le bios ainsi que plein d'autres choses : C'est toujours pareil !
- Il est cependant possible que tout fonctionne nickel : Si je démarre le système avec Super-Grub-Disk dans le lecteur tous les noyaux démarrent en moins de deux minutes. (Il me faut choisir détecter les OS , ce qui fabrique un sous-menu avec une entrée par noyau.) Une fois le système démarré si je passe en console tout reste propre (aucun tag.) Toutefois ceux-ci peuvent apparaître si je veux éteindre. Du coup j'ai essayé toute sorte de paramètres GRUB mais rien ne fonctionne ! (Enfin, aucun de ceux que j'ai trouvé. Il n'existe apparemment aucune liste exhaustive des paramètres GRUB disponibles dans les pages en français du ouaîbe ) On ne peu pas copier de fichier grub.cfg sur Super-Grub-Disk car il n'y en a pas dans ce CD, juste un fatras incompréhensible de fichiers paramètres conçus pour se mordre mutuellement la queue.
J'ai aussi essayé de faire démarré mon système à partir d'une clé USB équipée d'un GRUB et perdu tout un après-midi pour me construire ça : Effectivement ça fonctionne... 
mais tout aussi laborieusement qu'à partir du GRUB sur disque dur !
Avec Lilo c'est bien sûr pareil.
Voilà, qui peut m'aider ? Au Secours !
Dernière modification par Croa (Le 15/02/2016, à 20:13)
Hors ligne
#2 Le 13/02/2016, à 22:02
- moko138
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Démarre ton pc et donne au minimum
lspciSi tu installes lshw et que tu donnes
sudo lshwce sera encore mieux.
Et si tu accèdes au système installé pour nous donner le contenu de
/var/log/dmesg et celui de
/var/log/dmesg.0, ce sera super
Dernière modification par moko138 (Le 13/02/2016, à 22:02)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 14/02/2016, à 00:19
- Croa
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Voilà :
christian@LDLC2:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8280]
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 01)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 3a)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 5
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)Ensuite,
lshw
ldlc2
description: Ordinateur de Bureau
produit: To Be Filled By O.E.M. (To Be Filled By O.E.M.)
fabriquant: To Be Filled By O.E.M.
version: To Be Filled By O.E.M.
numéro de série: To Be Filled By O.E.M.
bits: 64 bits
fonctionnalités: smbios-2.8 dmi-2.7 vsyscall32
configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009
*-core
description: Carte mère
produit: AM1B-M
fabriquant: ASRock
identifiant matériel: 0
numéro de série: M80-4B026701349
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: P1.50
date: 04/29/2015
taille: 64KiB
capacité: 4032KiB
fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
*-memory
description: Mémoire Système
identifiant matériel: f
emplacement: Carte mère
taille: 8GiB
*-bank:0
description: DIMM DDR3 Synchrone 800 MHz (1,2 ns)
produit: 9905584-029.A00LF
identifiant matériel: 0
numéro de série: 6A20E379
emplacement: DIMM 0
taille: 4GiB
bits: 64 bits
horloge: 800MHz (1.2ns)
*-bank:1
description: DIMM DDR3 Synchrone 800 MHz (1,2 ns)
produit: 9905584-029.A00LF
identifiant matériel: 1
numéro de série: 84021EF8
emplacement: DIMM 1
taille: 4GiB
bits: 64 bits
horloge: 800MHz (1.2ns)
*-cache:0
description: L1 cache
identifiant matériel: 15
emplacement: L1 CACHE
taille: 256KiB
capacité: 256KiB
horloge: 1GHz (1.0ns)
fonctionnalités: pipeline-burst internal write-back unified
*-cache:1
description: L2 cache
identifiant matériel: 16
emplacement: L2 CACHE
taille: 2MiB
capacité: 2MiB
horloge: 1GHz (1.0ns)
fonctionnalités: pipeline-burst internal write-back unified
*-cpu
description: CPU
produit: AMD Sempron(tm) 3850 APU with Radeon(tm) R3
fabriquant: Advanced Micro Devices [AMD]
identifiant matériel: 17
information bus: cpu@0
version: AMD Sempron(tm) 3850 APU with Radeon(tm) R3
emplacement: CPUSocket
taille: 1GHz
capacité: 1300MHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1 xsaveopt cpufreq
configuration: cores=4 enabledcores=4 threads=4
*-pci:0
description: Host bridge
produit: Family 16h Processor Root Complex
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 00
bits: 32 bits
horloge: 33MHz
*-display
description: VGA compatible controller
produit: Kabini [Radeon HD 8280]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 00
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
ressources: irq:36 mémoire:b0000000-bfffffff mémoire:d2000000-d27fffff portE/S:f000(taille=256) mémoire:fe200000-fe23ffff mémoire:fe240000-fe25ffff
*-pci:0
description: PCI bridge
produit: Family 16h Processor Functions 5:1
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 2.1
information bus: pci@0000:00:02.1
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:24 portE/S:e000(taille=4096) mémoire:fd000000-fe0fffff portE/S:c0000000(taille=301989888)
*-display
description: VGA compatible controller
produit: GT218 [GeForce 210]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a2
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
ressources: irq:34 mémoire:fd000000-fdffffff mémoire:c0000000-cfffffff mémoire:d0000000-d1ffffff portE/S:e000(taille=128) mémoire:fe000000-fe07ffff
*-multimedia
description: Audio device
produit: High Definition Audio Controller
fabriquant: NVIDIA Corporation
identifiant matériel: 0.1
information bus: pci@0000:01:00.1
version: a1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:37 mémoire:fe080000-fe083fff
*-pci:1
description: PCI bridge
produit: Family 16h Processor Functions 5:1
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 2.3
information bus: pci@0000:00:02.3
version: 00
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:25 portE/S:d000(taille=4096) mémoire:fe100000-fe1fffff portE/S:d2800000(taille=1048576)
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: eth0
version: 11
numéro de série: d0:50:99:59:4f:a7
taille: 100Mbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.1.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
ressources: irq:33 portE/S:d000(taille=256) mémoire:fe100000-fe100fff mémoire:d2800000-d2803fff
*-usb:0
description: USB controller
produit: FCH USB XHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 10
information bus: pci@0000:00:10.0
version: 01
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi msix pciexpress xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:18 mémoire:fe264000-fe265fff
*-storage
description: SATA controller
produit: FCH SATA Controller [AHCI mode]
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 11
information bus: pci@0000:00:11.0
version: 40
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage pm msi ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=32
ressources: irq:32 portE/S:f140(taille=8) portE/S:f130(taille=4) portE/S:f120(taille=8) portE/S:f110(taille=4) portE/S:f100(taille=16) mémoire:fe26a000-fe26a3ff
*-usb:1
description: USB controller
produit: FCH USB OHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 12
information bus: pci@0000:00:12.0
version: 39
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:fe269000-fe269fff
*-usb:2
description: USB controller
produit: FCH USB EHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 12.2
information bus: pci@0000:00:12.2
version: 39
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
ressources: irq:17 mémoire:fe268000-fe2680ff
*-usb:3
description: USB controller
produit: FCH USB OHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 13
information bus: pci@0000:00:13.0
version: 39
bits: 32 bits
horloge: 66MHz
fonctionnalités: ohci bus_master
configuration: driver=ohci-pci latency=32
ressources: irq:18 mémoire:fe267000-fe267fff
*-usb:4
description: USB controller
produit: FCH USB EHCI Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 13.2
information bus: pci@0000:00:13.2
version: 39
bits: 32 bits
horloge: 66MHz
fonctionnalités: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
ressources: irq:17 mémoire:fe266000-fe2660ff
*-serial
description: SMBus
produit: FCH SMBus Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 3a
bits: 32 bits
horloge: 66MHz
configuration: driver=piix4_smbus latency=0
ressources: irq:0
*-multimedia
description: Audio device
produit: FCH Azalia Controller
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 14.2
information bus: pci@0000:00:14.2
version: 02
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm bus_master cap_list
configuration: driver=snd_hda_intel latency=32
ressources: irq:16 mémoire:fe260000-fe263fff
*-isa
description: ISA bridge
produit: FCH LPC Bridge
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 14.3
information bus: pci@0000:00:14.3
version: 11
bits: 32 bits
horloge: 66MHz
fonctionnalités: isa bus_master
configuration: latency=0
*-pci:1
description: Host bridge
produit: Family 16h Processor Function 0
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 101
information bus: pci@0000:00:02.0
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:2
description: Host bridge
produit: Family 16h Processor Function 0
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 102
information bus: pci@0000:00:18.0
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:3
description: Host bridge
produit: Family 16h Processor Function 1
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 103
information bus: pci@0000:00:18.1
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:4
description: Host bridge
produit: Family 16h Processor Function 2
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 104
information bus: pci@0000:00:18.2
version: 00
bits: 32 bits
horloge: 33MHz
*-pci:5
description: Host bridge
produit: Family 16h Processor Function 3
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 105
information bus: pci@0000:00:18.3
version: 00
bits: 32 bits
horloge: 33MHz
configuration: driver=k10temp
ressources: irq:0
*-pci:6
description: Host bridge
produit: Family 16h Processor Function 4
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 106
information bus: pci@0000:00:18.4
version: 00
bits: 32 bits
horloge: 33MHz
configuration: driver=fam15h_power
ressources: irq:0
*-pci:7
description: Host bridge
produit: Family 16h Processor Function 5
fabriquant: Advanced Micro Devices, Inc. [AMD]
identifiant matériel: 107
information bus: pci@0000:00:18.5
version: 00
bits: 32 bits
horloge: 33MHz
*-scsi:0
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-cdrom
description: SCSI CD-ROM
produit: DVD-ROM GDR8162B
fabriquant: HL-DT-ST
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/sr0
version: 0015
fonctionnalités: removable audio
configuration: ansiversion=5 status=ready
*-medium
identifiant matériel: 0
nom logique: /dev/cdrom
fonctionnalités: partitioned partitioned:dos
*-volume NON-RÉCLAMÉ
description: Primary partition
identifiant matériel: 1
capacité: 7133KiB
fonctionnalités: primary bootable
*-scsi:1
identifiant matériel: 2
nom logique: scsi1
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: TOSHIBA DT01ACA0
fabriquant: Toshiba
identifiant matériel: 0.0.0
information bus: scsi@1:0.0.0
nom logique: /dev/sda
version: A750
numéro de série: 85HE2H5AS
taille: 465GiB (500GB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=4096 signature=000dcf89
*-volume:0
description: Windows NTFS volume
identifiant matériel: 1
information bus: scsi@1:0.0.0,1
nom logique: /dev/sda1
version: 3.1
numéro de série: 528cfc6f-d8ce-1c49-a8f8-120c217d5c8f
taille: 48GiB
capacité: 48GiB
fonctionnalités: primary ntfs initialized
configuration: clustersize=4096 created=2016-02-01 14:13:12 filesystem=ntfs label=Windows state=clean
*-volume:1
description: Linux swap volume
identifiant matériel: 2
information bus: scsi@1:0.0.0,2
nom logique: /dev/sda2
version: 1
numéro de série: 0b5a9cba-24a4-4a71-b4ef-bb15feceabb1
taille: 10000MiB
capacité: 10000MiB
fonctionnalités: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:2
description: Volume EXT4
fabriquant: Linux
identifiant matériel: 3
information bus: scsi@1:0.0.0,3
nom logique: /dev/sda3
nom logique: /
version: 1.0
numéro de série: cd78ba11-9fb1-4cef-877b-d7c5dc7b34fc
taille: 206GiB
capacité: 206GiB
fonctionnalités: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2016-01-06 19:38:40 filesystem=ext4 lastmountpoint=/ modified=2016-02-13 22:34:31 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2016-02-13 22:34:31 state=mounted
*-volume:3
description: Extended partition
identifiant matériel: 4
information bus: scsi@1:0.0.0,4
nom logique: /dev/sda4
taille: 200GiB
capacité: 200GiB
fonctionnalités: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux filesystem partition
identifiant matériel: 5
nom logique: /dev/sda5
nom logique: /home
capacité: 140GiB
configuration: mount.fstype=ext4 mount.options=rw,relatime,data=ordered state=mounted
*-logicalvolume:1
description: HPFS/NTFS partition
identifiant matériel: 6
nom logique: /dev/sda6
capacité: 60GiBContenu de demesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-47-generic (buildd@lgw01-19) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53~14.04.1-Ubuntu SMP Mon Jan 18 16:09:14 UTC 2016 (Ubuntu 3.19.0-47.53~14.04.1-generic 3.19.8-ckt10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-47-generic root=UUID=cd78ba11-9fb1-4cef-877b-d7c5dc7b34fc ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 008f000000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008cfa7fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008cfa8000-0x000000008cfd7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008cfd8000-0x000000008d013fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008d014000-0x000000008d0d2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008d0d3000-0x000000008e3d1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e3d2000-0x000000008e3d2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e3d3000-0x000000008e3dafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008e3db000-0x000000008e52ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e530000-0x000000008ec39fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ec3a000-0x000000008ec70fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ec71000-0x000000008eff0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008eff1000-0x000000008effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM1B-M, BIOS P1.50 04/29/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFF0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000024f000000 aka 9456M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0x90000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x8f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24ee00000-0x24effffff]
[ 0.000000] [mem 0x24ee00000-0x24effffff] page 2M
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x24edfffff]
[ 0.000000] [mem 0x240000000-0x24edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[ 0.000000] [mem 0x220000000-0x23fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x8cfa7fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x8cdfffff] page 2M
[ 0.000000] [mem 0x8ce00000-0x8cfa7fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8cfd8000-0x8d013fff]
[ 0.000000] [mem 0x8cfd8000-0x8d013fff] page 4k
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x8e3d2000-0x8e3d2fff]
[ 0.000000] [mem 0x8e3d2000-0x8e3d2fff] page 4k
[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x8e3db000-0x8e52ffff]
[ 0.000000] [mem 0x8e3db000-0x8e52ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8ec3a000-0x8ec70fff]
[ 0.000000] [mem 0x8ec3a000-0x8ec70fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8eff1000-0x8effffff]
[ 0.000000] [mem 0x8eff1000-0x8effffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] [mem 0x100000000-0x21fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x349d0000-0x364dffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000008D098080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000008D09D750 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x000000008D098190 0055B9 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000008D0C9E80 000040
[ 0.000000] ACPI: APIC 0x000000008D09D860 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000008D09D8E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000008D09D928 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000008D09D968 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: AAFT 0x000000008D09D9A0 00017D (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000008D09DB20 00096C (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000008D09E490 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000008D0A2B48 0003A8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000008D0A2EF0 0006CA (v01 AMD CPMADPS4 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000008D0A35C0 001120 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x24eff6000-0x24effafff]
[ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246e00000-ffff88024e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x24effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x8cfa7fff]
[ 0.000000] node 0: [mem 0x8cfd8000-0x8d013fff]
[ 0.000000] node 0: [mem 0x8e3d2000-0x8e3d2fff]
[ 0.000000] node 0: [mem 0x8e3db000-0x8e52ffff]
[ 0.000000] node 0: [mem 0x8ec3a000-0x8ec70fff]
[ 0.000000] node 0: [mem 0x8eff1000-0x8effffff]
[ 0.000000] node 0: [mem 0x100000000-0x24effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x24effffff]
[ 0.000000] On node 0 totalpages: 1949981
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8966 pages used for memmap
[ 0.000000] DMA32 zone: 573824 pages, LIFO batch:31
[ 0.000000] Normal zone: 21440 pages used for memmap
[ 0.000000] Normal zone: 1372160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8cfa8000-0x8cfd7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d014000-0x8d0d2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d0d3000-0x8e3d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e3d3000-0x8e3dafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e530000-0x8ec39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ec71000-0x8eff0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x8f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88024ec00000 s86144 r8192 d32640 u524288
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1919490
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-47-generic root=UUID=cd78ba11-9fb1-4cef-877b-d7c5dc7b34fc ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0x84000000-0x87ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0x84000000-0x87ffffff]
[ 0.000000] Memory: 7500640K/7799924K available (7922K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 299284K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:1000 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1300.001 MHz processor
[ 0.000067] Calibrating delay loop (skipped), value calculated using timer frequency.. 2600.00 BogoMIPS (lpj=5200004)
[ 0.000155] pid_max: default: 32768 minimum: 301
[ 0.000210] ACPI: Core revision 20141107
[ 0.021481] ACPI: All ACPI Tables successfully acquired
[ 0.021635] Security Framework initialized
[ 0.021708] AppArmor: AppArmor initialized
[ 0.021752] Yama: becoming mindful.
[ 0.023131] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028164] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.030426] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030508] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.031144] Initializing cgroup subsys memory
[ 0.031200] Initializing cgroup subsys devices
[ 0.031252] Initializing cgroup subsys freezer
[ 0.031300] Initializing cgroup subsys net_cls
[ 0.031347] Initializing cgroup subsys blkio
[ 0.031394] Initializing cgroup subsys perf_event
[ 0.031441] Initializing cgroup subsys net_prio
[ 0.031488] Initializing cgroup subsys hugetlb
[ 0.031579] CPU: Physical Processor ID: 0
[ 0.032576] CPU: Processor Core ID: 0
[ 0.032620] mce: CPU supports 6 MCE banks
[ 0.032672] LVT offset 1 assigned for vector 0xf9
[ 0.032722] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.032722] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.033000] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[ 0.036882] ftrace: allocating 30027 entries in 118 pages
[ 0.062376] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.102135] smpboot: CPU0: AMD Sempron(tm) 3850 APU with Radeon(tm) R3 (fam: 16, model: 00, stepping: 01)
[ 0.206848] Performance Events: AMD PMU driver.
[ 0.206924] ... version: 0
[ 0.206966] ... bit width: 48
[ 0.207007] ... generic registers: 4
[ 0.207049] ... value mask: 0000ffffffffffff
[ 0.207092] ... max period: 00007fffffffffff
[ 0.207135] ... fixed-purpose events: 0
[ 0.207176] ... event mask: 000000000000000f
[ 0.209023] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.209350] x86: Booting SMP configuration:
[ 0.209394] .... node #0, CPUs: #1 #2 #3
[ 0.249571] x86: Booted up 1 node, 4 CPUs
[ 0.249659] smpboot: Total of 4 processors activated (10400.00 BogoMIPS)
[ 0.251109] devtmpfs: initialized
[ 0.261750] evm: security.selinux
[ 0.261793] evm: security.SMACK64
[ 0.261834] evm: security.SMACK64EXEC
[ 0.261876] evm: security.SMACK64TRANSMUTE
[ 0.261917] evm: security.SMACK64MMAP
[ 0.261958] evm: security.ima
[ 0.261998] evm: security.capability
[ 0.262202] PM: Registering ACPI NVS region [mem 0x8d014000-0x8d0d2fff] (782336 bytes)
[ 0.262290] PM: Registering ACPI NVS region [mem 0x8e3d3000-0x8e3dafff] (32768 bytes)
[ 0.262692] pinctrl core: initialized pinctrl subsystem
[ 0.262975] RTC time: 21:33:11, date: 02/13/16
[ 0.263265] NET: Registered protocol family 16
[ 0.270718] cpuidle: using governor ladder
[ 0.278726] cpuidle: using governor menu
[ 0.278998] ACPI: bus type PCI registered
[ 0.279046] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.279296] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.279357] PCI: not using MMCONFIG
[ 0.279400] PCI: Using configuration type 1 for base access
[ 0.279443] PCI: Using configuration type 1 for extended access
[ 0.280179] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.280225] mtrr: probably your BIOS does not setup all CPUs.
[ 0.280268] mtrr: corrected configuration.
[ 0.291866] ACPI: Added _OSI(Module Device)
[ 0.291912] ACPI: Added _OSI(Processor Device)
[ 0.291956] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.291999] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.297750] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.307681] ACPI: Interpreter enabled
[ 0.307741] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.307863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.308012] ACPI: (supports S0 S3 S4 S5)
[ 0.308056] ACPI: Using IOAPIC for interrupt routing
[ 0.308147] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.308309] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.309322] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.321827] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.322739] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.322797] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.323316] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.323799] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.324783] PCI host bridge to bus 0000:00
[ 0.324832] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.324878] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.324925] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.324972] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.325019] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.325065] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.325113] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.325160] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
[ 0.325219] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.325423] pci 0000:00:01.0: [1002:9836] type 00 class 0x030000
[ 0.325448] pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.325465] pci 0000:00:01.0: reg 0x18: [mem 0xd2000000-0xd27fffff 64bit pref]
[ 0.325477] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.325489] pci 0000:00:01.0: reg 0x24: [mem 0xfe200000-0xfe23ffff]
[ 0.325501] pci 0000:00:01.0: reg 0x30: [mem 0xfe240000-0xfe25ffff pref]
[ 0.325564] pci 0000:00:01.0: supports D1 D2
[ 0.325570] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.325742] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.325931] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[ 0.326037] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.326122] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.326263] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.326368] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.326452] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 0.326621] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.326649] pci 0000:00:10.0: reg 0x10: [mem 0xfe264000-0xfe265fff 64bit]
[ 0.326771] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.326865] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.327016] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.327042] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.327055] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.327068] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.327080] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.327093] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.327106] pci 0000:00:11.0: reg 0x24: [mem 0xfe26a000-0xfe26a3ff]
[ 0.327173] pci 0000:00:11.0: PME# supported from D3hot
[ 0.327329] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.327348] pci 0000:00:12.0: reg 0x10: [mem 0xfe269000-0xfe269fff]
[ 0.327477] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.327617] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.327641] pci 0000:00:12.2: reg 0x10: [mem 0xfe268000-0xfe2680ff]
[ 0.327735] pci 0000:00:12.2: supports D1 D2
[ 0.327740] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.327816] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.327956] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.327974] pci 0000:00:13.0: reg 0x10: [mem 0xfe267000-0xfe267fff]
[ 0.328108] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.328245] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.328269] pci 0000:00:13.2: reg 0x10: [mem 0xfe266000-0xfe2660ff]
[ 0.328363] pci 0000:00:13.2: supports D1 D2
[ 0.328368] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.328444] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.328581] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.328785] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.328812] pci 0000:00:14.2: reg 0x10: [mem 0xfe260000-0xfe263fff 64bit]
[ 0.328889] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.328963] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.329095] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.329311] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.329470] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.329627] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.329784] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.329948] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.330102] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.330382] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[ 0.330403] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.330420] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.330438] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.330449] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.330461] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.330649] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.330672] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.338972] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.339032] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.339041] pci 0000:00:02.1: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.339052] pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.339228] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.339255] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.339290] pci 0000:02:00.0: reg 0x18: [mem 0xfe100000-0xfe100fff 64bit]
[ 0.339313] pci 0000:02:00.0: reg 0x20: [mem 0xd2800000-0xd2803fff 64bit pref]
[ 0.339430] pci 0000:02:00.0: supports D1 D2
[ 0.339436] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.339495] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.347048] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.347112] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
[ 0.347121] pci 0000:00:02.3: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.347131] pci 0000:00:02.3: bridge window [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.348207] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 *10 11 14 15)
[ 0.348658] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
[ 0.349112] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
[ 0.349564] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
[ 0.349990] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
[ 0.350390] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.350818] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.351261] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.352369] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.352416] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.352481] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.352536] vgaarb: loaded
[ 0.352578] vgaarb: bridge control possible 0000:01:00.0
[ 0.352622] vgaarb: no bridge control possible 0000:00:01.0
[ 0.353267] SCSI subsystem initialized
[ 0.353464] libata version 3.00 loaded.
[ 0.353528] ACPI: bus type USB registered
[ 0.353620] usbcore: registered new interface driver usbfs
[ 0.353689] usbcore: registered new interface driver hub
[ 0.353770] usbcore: registered new device driver usb
[ 0.354183] PCI: Using ACPI for IRQ routing
[ 0.362187] PCI: pci_cache_line_size set to 64 bytes
[ 0.362264] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.362269] e820: reserve RAM buffer [mem 0x8cfa8000-0x8fffffff]
[ 0.362274] e820: reserve RAM buffer [mem 0x8d014000-0x8fffffff]
[ 0.362279] e820: reserve RAM buffer [mem 0x8e3d3000-0x8fffffff]
[ 0.362283] e820: reserve RAM buffer [mem 0x8e530000-0x8fffffff]
[ 0.362287] e820: reserve RAM buffer [mem 0x8ec71000-0x8fffffff]
[ 0.362290] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[ 0.362294] e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff]
[ 0.362549] NetLabel: Initializing
[ 0.362592] NetLabel: domain hash size = 128
[ 0.362634] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.362704] NetLabel: unlabeled traffic allowed by default
[ 0.362932] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.363091] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.365256] Switched to clocksource hpet
[ 0.379611] AppArmor: AppArmor Filesystem Enabled
[ 0.379822] pnp: PnP ACPI init
[ 0.380144] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.380198] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.380401] system 00:01: [mem 0x90000000-0xafffffff] has been reserved
[ 0.380451] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.380722] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.380772] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.381503] pnp 00:03: [dma 3]
[ 0.381752] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.381854] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.381935] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.382080] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.382130] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.382238] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.382594] pnp 00:08: [dma 0 disabled]
[ 0.382697] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.383420] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.383469] system 00:09: [io 0x040b] has been reserved
[ 0.383515] system 00:09: [io 0x04d6] has been reserved
[ 0.383561] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.383608] system 00:09: [io 0x0c14] has been reserved
[ 0.383654] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.383700] system 00:09: [io 0x0c52] has been reserved
[ 0.383746] system 00:09: [io 0x0c6c] has been reserved
[ 0.383791] system 00:09: [io 0x0c6f] has been reserved
[ 0.383837] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.383884] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.383930] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.383976] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.384023] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.384069] system 00:09: [io 0x0800-0x089f] could not be reserved
[ 0.384116] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.384162] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.384208] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.384255] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.384303] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.384351] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.384399] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.384447] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.384495] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.384542] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.384590] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.384639] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.385154] pnp: PnP ACPI: found 10 devices
[ 0.395190] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.395240] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.395291] pci 0000:00:02.1: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.395341] pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.395402] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.395448] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
[ 0.395498] pci 0000:00:02.3: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.395547] pci 0000:00:02.3: bridge window [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.395609] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.395615] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.395620] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.395625] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.395630] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.395635] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.395640] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
[ 0.395645] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.395650] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.395655] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.395660] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.395665] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.395670] pci_bus 0000:02: resource 2 [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.395733] NET: Registered protocol family 2
[ 0.396229] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.396698] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.397079] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.397183] TCP: reno registered
[ 0.397251] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.397401] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.397641] NET: Registered protocol family 1
[ 0.397725] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.589812] PCI: CLS 64 bytes, default 64
[ 0.589972] Trying to unpack rootfs image as initramfs...
[ 1.642131] Freeing initrd memory: 27712K (ffff8800349d0000 - ffff8800364e0000)
[ 1.643738] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.643787] software IO TLB [mem 0x88fa8000-0x8cfa8000] (64MB) mapped at [ffff880088fa8000-ffff88008cfa7fff]
[ 1.644301] perf: AMD NB counters detected
[ 1.644348] perf: AMD L2I counters detected
[ 1.644542] microcode: CPU0: patch_level=0x0700010b
[ 1.644599] microcode: CPU1: patch_level=0x0700010b
[ 1.644661] microcode: CPU2: patch_level=0x0700010b
[ 1.644719] microcode: CPU3: patch_level=0x0700010b
[ 1.644913] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.644980] LVT offset 0 assigned for vector 0x400
[ 1.645063] perf: AMD IBS detected (0x000000ff)
[ 1.645167] Scanning for low memory corruption every 60 seconds
[ 1.646049] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.646133] Initialise system trusted keyring
[ 1.646227] audit: initializing netlink subsys (disabled)
[ 1.646302] audit: type=2000 audit(1455399192.532:1): initialized
[ 1.647155] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.651228] zpool: loaded
[ 1.651274] zbud: loaded
[ 1.651689] VFS: Disk quotas dquot_6.5.2
[ 1.651819] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.653106] fuse init (API version 7.23)
[ 1.653505] Key type big_key registered
[ 1.654481] Key type asymmetric registered
[ 1.654528] Asymmetric key parser 'x509' registered
[ 1.654659] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.654806] io scheduler noop registered
[ 1.654853] io scheduler deadline registered (default)
[ 1.654976] io scheduler cfq registered
[ 1.655663] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.655747] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.656053] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.656116] ACPI: Power Button [PWRB]
[ 1.656265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.656322] ACPI: Power Button [PWRF]
[ 1.656456] ACPI: acpi_idle registered with cpuidle
[ 1.657332] GHES: HEST is not enabled!
[ 1.657599] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.678144] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.682190] Linux agpgart interface v0.103
[ 1.685616] brd: module loaded
[ 1.687451] loop: module loaded
[ 1.688006] libphy: Fixed MDIO Bus: probed
[ 1.688053] tun: Universal TUN/TAP device driver, 1.6
[ 1.688097] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.688248] PPP generic driver version 2.4.2
[ 1.688627] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.688685] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.689222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.689271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.689327] usb usb1: Product: xHCI Host Controller
[ 1.689372] usb usb1: Manufacturer: Linux 3.19.0-47-generic xhci-hcd
[ 1.689417] usb usb1: SerialNumber: 0000:00:10.0
[ 1.689722] hub 1-0:1.0: USB hub found
[ 1.689799] hub 1-0:1.0: 2 ports detected
[ 1.690063] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.690113] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.692346] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.692460] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.692508] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.692563] usb usb2: Product: xHCI Host Controller
[ 1.692607] usb usb2: Manufacturer: Linux 3.19.0-47-generic xhci-hcd
[ 1.692653] usb usb2: SerialNumber: 0000:00:10.0
[ 1.692975] hub 2-0:1.0: USB hub found
[ 1.693037] hub 2-0:1.0: 2 ports detected
[ 1.693304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.693360] ehci-pci: EHCI PCI platform driver
[ 1.693557] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.693611] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.693671] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.693738] ehci-pci 0000:00:12.2: debug port 1
[ 1.693851] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe268000
[ 1.705989] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.706188] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.706237] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.706294] usb usb3: Product: EHCI Host Controller
[ 1.706339] usb usb3: Manufacturer: Linux 3.19.0-47-generic ehci_hcd
[ 1.706385] usb usb3: SerialNumber: 0000:00:12.2
[ 1.706783] hub 3-0:1.0: USB hub found
[ 1.706845] hub 3-0:1.0: 4 ports detected
[ 1.707386] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.707442] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.707503] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.707570] ehci-pci 0000:00:13.2: debug port 1
[ 1.707666] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe266000
[ 1.717989] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.718216] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.718265] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.718321] usb usb4: Product: EHCI Host Controller
[ 1.718366] usb usb4: Manufacturer: Linux 3.19.0-47-generic ehci_hcd
[ 1.718412] usb usb4: SerialNumber: 0000:00:13.2
[ 1.718810] hub 4-0:1.0: USB hub found
[ 1.718873] hub 4-0:1.0: 4 ports detected
[ 1.719237] ehci-platform: EHCI generic platform driver
[ 1.719313] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.719367] ohci-pci: OHCI PCI platform driver
[ 1.719616] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.719672] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.719785] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe269000
[ 1.778113] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.778171] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.778228] usb usb5: Product: OHCI PCI host controller
[ 1.778273] usb usb5: Manufacturer: Linux 3.19.0-47-generic ohci_hcd
[ 1.778319] usb usb5: SerialNumber: 0000:00:12.0
[ 1.778744] hub 5-0:1.0: USB hub found
[ 1.778808] hub 5-0:1.0: 4 ports detected
[ 1.779350] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.779411] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.779508] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe267000
[ 1.838134] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.838192] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.838249] usb usb6: Product: OHCI PCI host controller
[ 1.838294] usb usb6: Manufacturer: Linux 3.19.0-47-generic ohci_hcd
[ 1.838341] usb usb6: SerialNumber: 0000:00:13.0
[ 1.838808] hub 6-0:1.0: USB hub found
[ 1.838873] hub 6-0:1.0: 4 ports detected
[ 1.839246] ohci-platform: OHCI generic platform driver
[ 1.839322] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.839507] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.839554] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.840337] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.840697] mousedev: PS/2 mouse device common for all mice
[ 1.841095] rtc_cmos 00:05: RTC can wake from S4
[ 1.841321] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.841396] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.841470] i2c /dev entries driver
[ 1.841680] device-mapper: uevent: version 1.0.3
[ 1.841914] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.842012] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.842410] PCCT header not found.
[ 1.842452] ACPI PCC probe failed.
[ 1.842731] TCP: cubic registered
[ 1.843036] NET: Registered protocol family 10
[ 1.843572] NET: Registered protocol family 17
[ 1.843639] Key type dns_resolver registered
[ 1.844469] Loading compiled-in X.509 certificates
[ 1.847103] Loaded X.509 cert 'Magrathea: Glacier signing key: 8335c30cf45ac8874b83816192bf33dddcb532b6'
[ 1.847197] registered taskstats version 1
[ 1.852251] Key type trusted registered
[ 1.860691] Key type encrypted registered
[ 1.860749] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.860800] ima: No TPM chip found, activating TPM-bypass!
[ 1.860886] evm: HMAC attrs: 0x1
[ 1.861536] Magic number: 4:210:601
[ 1.861788] rtc_cmos 00:05: setting system clock to 2016-02-13 21:33:13 UTC (1455399193)
[ 1.862141] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.862576] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.862622] EDD information not available.
[ 1.862865] PM: Hibernation image not present or could not be loaded.
[ 1.863649] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 1.863710] Write protecting the kernel read-only data: 12288k
[ 1.864241] Freeing unused kernel memory: 256K (ffff8800017c0000 - ffff880001800000)
[ 1.864556] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[ 1.869475] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.897161] systemd-udevd[124]: starting version 204
[ 1.945042] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.946106] ahci 0000:00:11.0: version 3.0
[ 1.946361] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.946425] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.947246] scsi host0: ahci
[ 1.947611] scsi host1: ahci
[ 1.948062] ata1: SATA max UDMA/133 abar m1024@0xfe26a000 port 0xfe26a100 irq 32
[ 1.948123] ata2: SATA max UDMA/133 abar m1024@0xfe26a000 port 0xfe26a180 irq 32
[ 1.950391] [drm] Initialized drm 1.1.0 20060810
[ 1.951961] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000016000, d0:50:99:59:4f:a7, XID 0c000800 IRQ 33
[ 1.952027] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.975219] wmi: Mapper loaded
[ 2.024748] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 2.025418] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280b1
[ 2.025468] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 2.025514] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 2.144451] nouveau [ VBIOS][0000:01:00.0] using image from PROM
[ 2.144806] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 2.144855] nouveau [ VBIOS][0000:01:00.0] version 70.18.49.00.00
[ 2.146852] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 2.146907] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 2.174011] usb 6-2: new low-speed USB device number 2 using ohci-pci
[ 2.196062] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 2.196172] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 2.196218] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 2.196264] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 2.198612] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 2.226919] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 2.226987] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 2.227038] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 2.246992] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[ 2.247056] nouveau [ CLK][0000:01:00.0] 0f: core 589 MHz shader 1402 MHz memory 500 MHz
[ 2.247150] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 2.247618] [TTM] Zone kernel: Available graphics memory: 3765194 kiB
[ 2.247664] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.247709] [TTM] Initializing pool allocator
[ 2.247760] [TTM] Initializing DMA pool allocator
[ 2.247825] nouveau [ DRM] VRAM: 1024 MiB
[ 2.247869] nouveau [ DRM] GART: 1048576 MiB
[ 2.247918] nouveau [ DRM] TMDS table version 2.0
[ 2.247962] nouveau [ DRM] DCB version 4.0
[ 2.248008] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 2.248055] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 2.248100] nouveau [ DRM] DCB outp 02: 02011362 00020010
[ 2.248146] nouveau [ DRM] DCB outp 03: 01022310 00000000
[ 2.248191] nouveau [ DRM] DCB conn 00: 00001030
[ 2.248264] nouveau [ DRM] DCB conn 01: 00002161
[ 2.248335] nouveau [ DRM] DCB conn 02: 00000200
[ 2.272309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.272357] [drm] Driver supports precise vblank timestamp query.
[ 2.298701] nouveau [ DRM] MM: using COPY for buffer copies
[ 2.341287] usb 6-2: New USB device found, idVendor=1bcf, idProduct=0007
[ 2.341339] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.341391] usb 6-2: Product: USB Optical Mouse
[ 2.351319] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.361718] usbcore: registered new interface driver usbhid
[ 2.361774] usbhid: USB HID core driver
[ 2.365776] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/0003:1BCF:0007.0001/input/input3
[ 2.366319] hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 2.388529] nouveau [ DRM] allocated 1360x768 fb: 0x70000, bo ffff880036395c00
[ 2.438126] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.438159] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.438873] ata2.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[ 2.438877] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.439694] ata2.00: configured for UDMA/133
[ 2.442581] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33
[ 2.452673] ata1.00: configured for UDMA/33
[ 2.458211] Console: switching to colour frame buffer device 170x48
[ 2.459955] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.459970] nouveau 0000:01:00.0: registered panic notifier
[ 2.462259] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 2.642362] tsc: Refined TSC clocksource calibration: 1300.000 MHz
[ 3.642958] Switched to clocksource tsc
[ 23.966746] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 23.966790] scsi 0:0:0:0: CDB:
[ 23.966801] Inquiry: 12 00 00 00 60 00
[ 23.966849] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
[ 23.966849] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 23.966874] ata1.00: status: { DRDY }
[ 23.966890] ata1: hard resetting link
[ 24.458890] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 24.471840] ata1.00: configured for UDMA/33
[ 24.474598] ata1: EH complete
[ 24.474630] scsi 0:0:0:0: scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[ 24.481719] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0015 PQ: 0 ANSI: 5
[ 29.492855] ata1.00: qc timeout (cmd 0xa0)
[ 29.493383] ata1: limiting SATA link speed to 1.5 Gbps
[ 29.493875] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 29.494363] ata1.00: irq_stat 0x40000001
[ 29.494861] scsi 0:0:0:0: CDB:
[ 29.495349] Inquiry: 12 01 00 00 ff 00
[ 29.495877] ata1.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 4 dma 16640 in
[ 29.495877] res 51/54:03:00:00:01/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 29.496886] ata1.00: status: { DRDY ERR }
[ 29.497392] ata1: hard resetting link
[ 29.989047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 30.007086] ata1.00: configured for UDMA/33
[ 30.012114] ata1: EH complete
[ 61.037218] ata1.00: limiting speed to UDMA/25:PIO4
[ 61.037253] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 61.037271] sr 0:0:0:0: CDB:
[ 61.037279] Mode Sense(10): 5a 00 2a 00 00 00 00 00 80 00
[ 61.037319] ata1.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 6 dma 16512 in
[ 61.037319] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 61.037341] ata1.00: status: { DRDY }
[ 61.037355] ata1: hard resetting link
[ 61.529379] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 61.544542] ata1.00: configured for UDMA/25
[ 61.549102] ata1: EH complete
[ 61.549133] sr 0:0:0:0: [sr0] scsi-1 drive
[ 61.549170] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 61.549557] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 61.549731] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 61.550051] scsi 1:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
[ 61.550515] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 61.550543] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 61.550567] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 61.550687] sd 1:0:0:0: [sda] Write Protect is off
[ 61.550702] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 61.550769] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 61.657953] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 61.659257] sd 1:0:0:0: [sda] Attached SCSI disk
[ 67.153733] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 67.153758] EXT4-fs (sda3): write access will be enabled during recovery
[ 67.216082] random: nonblocking pool is initialized
[ 67.864592] EXT4-fs (sda3): recovery complete
[ 67.871975] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 68.928281] ata1.00: limiting speed to PIO4
[ 68.928312] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 68.928332] sr 0:0:0:0: CDB:
[ 68.928340] Xdread, Read track info: 52 01 00 00 00 01 00 00 20 00
[ 68.928380] ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 19 dma 16416 in
[ 68.928380] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 68.928401] ata1.00: status: { DRDY }
[ 68.928415] ata1: hard resetting link
[ 69.420435] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 69.435102] ata1.00: configured for PIO4
[ 69.439494] ata1: EH complete
[ 69.439523] sr 0:0:0:0: [sr0] CDROM (ioctl) error, command:
[ 69.439541] Xdread, Read track info 52 01 00 00 00 01 00 00 20 00
[ 69.439575] sr 0:0:0:0: [sr0] Sense Key : Aborted Command [current] [descriptor]
[ 69.439589] sr 0:0:0:0: [sr0] Add. Sense: No additional sense information
[ 77.692239] init: bootchart main process (360) terminated with status 127
[ 77.816440] systemd-udevd[387]: starting version 204
[ 77.880956] init: bootchart post-stop process (382) terminated with status 127
[ 78.080999] lp: driver loaded but no devices found
[ 78.097792] ppdev: user-space parallel port driver
[ 78.105993] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 78.144384] parport_pc 00:03: reported by Plug and Play ACPI
[ 78.144428] parport0: PC-style at 0x378, irq 5 [PCSPP,EPP]
[ 78.240139] lp0: using parport0 (interrupt-driven).
[ 78.284547] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 78.288607] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 78.294279] MCE: In-kernel MCE decoding enabled.
[ 78.342537] EDAC MC: Ver: 3.0.0
[ 78.487678] [drm] radeon kernel modesetting enabled.
[ 78.490697] audit: type=1400 audit(1455399270.092:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=713 comm="apparmor_parser"
[ 78.490718] audit: type=1400 audit(1455399270.092:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=713 comm="apparmor_parser"
[ 78.490731] audit: type=1400 audit(1455399270.092:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=713 comm="apparmor_parser"
[ 78.491820] audit: type=1400 audit(1455399270.096:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=713 comm="apparmor_parser"
[ 78.491841] audit: type=1400 audit(1455399270.096:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=713 comm="apparmor_parser"
[ 78.492412] audit: type=1400 audit(1455399270.096:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=713 comm="apparmor_parser"
[ 78.500007] audit: type=1400 audit(1455399270.104:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=742 comm="apparmor_parser"
[ 78.515477] AMD64 EDAC driver v3.4.0
[ 78.515556] EDAC amd64: DRAM ECC disabled.
[ 78.515572] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 78.515572] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 78.515572] (Note that use of the override may cause unknown side effects.)
[ 78.622518] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 78.622525] AMD IOMMUv2 functionality not available on this system
[ 78.699524] AVX version of gcm_enc/dec engaged.
[ 78.699531] AES CTR mode by8 optimization enabled
[ 78.706486] Found CRAT image with size=936
[ 78.706495] Parsing CRAT table with 1 nodes
[ 78.706501] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 78.706504] CU CPU: cores=4 id_base=0
[ 78.706508] Found memory entry in CRAT table with proximity_domain=0
[ 78.706511] Found memory entry in CRAT table with proximity_domain=0
[ 78.706514] Found cache entry in CRAT table with processor_id=0
[ 78.706517] Found cache entry in CRAT table with processor_id=0
[ 78.706520] Found cache entry in CRAT table with processor_id=0
[ 78.706523] Found cache entry in CRAT table with processor_id=1
[ 78.706526] Found cache entry in CRAT table with processor_id=1
[ 78.706529] Found cache entry in CRAT table with processor_id=1
[ 78.706532] Found cache entry in CRAT table with processor_id=2
[ 78.706534] Found cache entry in CRAT table with processor_id=2
[ 78.706537] Found cache entry in CRAT table with processor_id=2
[ 78.706540] Found cache entry in CRAT table with processor_id=3
[ 78.706543] Found cache entry in CRAT table with processor_id=3
[ 78.706545] Found cache entry in CRAT table with processor_id=3
[ 78.706548] Creating topology SYSFS entries
[ 78.706601] Finished initializing topology ret=0
[ 78.706699] kfd kfd: Initialized module
[ 78.708043] [drm] initializing kernel modesetting (KABINI 0x1002:0x9836 0x1849:0x9836).
[ 78.708077] [drm] register mmio base: 0xFE200000
[ 78.708080] [drm] register mmio size: 262144
[ 78.708095] [drm] doorbell mmio base: 0xD2000000
[ 78.708098] [drm] doorbell mmio size: 8388608
[ 78.708173] ATOM BIOS: AMD
[ 78.708259] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 78.708266] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 78.708270] [drm] Detected VRAM RAM=512M, BAR=256M
[ 78.708274] [drm] RAM width 128bits DDR
[ 78.708304] [drm] radeon: 512M of VRAM memory ready
[ 78.708308] [drm] radeon: 1024M of GTT memory ready.
[ 78.708346] [drm] Loading kabini Microcode
[ 79.088582] kvm: Nested Virtualization enabled
[ 79.088592] kvm: Nested Paging enabled
[ 79.139306] [drm] Internal thermal controller without fan control
[ 79.140105] [drm] radeon: dpm initialized
[ 79.192410] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 79.193072] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 79.205556] [drm] PCIE GART of 1024M enabled (table at 0x000000000078C000).
[ 79.205800] radeon 0000:00:01.0: WB enabled
[ 79.205831] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880243ed5c00
[ 79.205838] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff880243ed5c04
[ 79.205844] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff880243ed5c08
[ 79.205851] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880243ed5c0c
[ 79.205857] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff880243ed5c10
[ 79.206778] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90012b36c98
[ 79.206896] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff880243ed5c18
[ 79.206903] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff880243ed5c1c
[ 79.206909] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 79.206913] [drm] Driver supports precise vblank timestamp query.
[ 79.206973] radeon 0000:00:01.0: radeon: using MSI.
[ 79.207017] [drm] radeon: irq initialized.
[ 79.212815] [drm] ring test on 0 succeeded in 2 usecs
[ 79.212933] [drm] ring test on 1 succeeded in 3 usecs
[ 79.212958] [drm] ring test on 2 succeeded in 2 usecs
[ 79.213210] [drm] ring test on 3 succeeded in 4 usecs
[ 79.213221] [drm] ring test on 4 succeeded in 4 usecs
[ 79.262506] [drm] ring test on 5 succeeded in 1 usecs
[ 79.284964] [drm] UVD initialized successfully.
[ 79.397167] [drm] ring test on 6 succeeded in 16 usecs
[ 79.397187] [drm] ring test on 7 succeeded in 3 usecs
[ 79.397190] [drm] VCE initialized successfully.
[ 79.400965] [drm] ib test on ring 0 succeeded in 0 usecs
[ 79.609265] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 79.617454] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 79.858285] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 79.900575] [drm] ib test on ring 1 succeeded in 0 usecs
[ 80.387259] init: failsafe main process (1137) killed by TERM signal
[ 80.400582] [drm] ib test on ring 2 succeeded in 0 usecs
[ 80.400669] [drm] ib test on ring 3 succeeded in 0 usecs
[ 80.400731] [drm] ib test on ring 4 succeeded in 0 usecs
[ 80.601398] FS-Cache: Loaded
[ 80.685699] RPC: Registered named UNIX socket transport module.
[ 80.685707] RPC: Registered udp transport module.
[ 80.685710] RPC: Registered tcp transport module.
[ 80.685713] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 80.833036] FS-Cache: Netfs 'nfs' registered for caching
[ 80.920803] [drm] ib test on ring 5 succeeded
[ 80.941437] [drm] ib test on ring 6 succeeded
[ 80.942057] [drm] ib test on ring 7 succeeded
[ 80.944022] [drm] Radeon Display Connectors
[ 80.944027] [drm] Connector 0:
[ 80.944030] [drm] DP-1
[ 80.944033] [drm] HPD1
[ 80.944039] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 80.944042] [drm] Encoders:
[ 80.944045] [drm] DFP1: INTERNAL_UNIPHY
[ 80.944048] [drm] Connector 1:
[ 80.944050] [drm] HDMI-A-2
[ 80.944053] [drm] HPD2
[ 80.944057] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 80.944060] [drm] Encoders:
[ 80.944063] [drm] DFP2: INTERNAL_UNIPHY
[ 80.944065] [drm] Connector 2:
[ 80.944068] [drm] VGA-2
[ 80.944072] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 80.944075] [drm] Encoders:
[ 80.944078] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 80.993715] [drm] fb mappable at 0xB0990000
[ 80.993723] [drm] vram apper at 0xB0000000
[ 80.993726] [drm] size 5242880
[ 80.993729] [drm] fb depth is 24
[ 80.993733] [drm] pitch is 5120
[ 80.993929] fbcon: radeondrmfb (fb1) is primary device
[ 80.993932] fbcon: Remapping primary device, fb1, to tty 1-63
[ 81.070685] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 81.325709] audit: type=1400 audit(1455399272.928:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1202 comm="apparmor_parser"
[ 81.325724] audit: type=1400 audit(1455399272.928:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1202 comm="apparmor_parser"
[ 81.326752] audit: type=1400 audit(1455399272.928:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1202 comm="apparmor_parser"
[ 81.394226] init: idmapd main process (1211) terminated with status 1
[ 81.394251] init: idmapd main process ended, respawning
[ 81.515923] init: cups main process (1203) killed by HUP signal
[ 81.515948] init: cups main process ended, respawning
[ 81.592097] radeon 0000:00:01.0: fb1: radeondrmfb frame buffer device
[ 81.599559] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 1
[ 81.599942] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 81.599955] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 81.662530] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 81.662543] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 81.662549] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 81.662554] sound hdaudioC0D0: mono: mono_out=0x0
[ 81.662559] sound hdaudioC0D0: inputs:
[ 81.662565] sound hdaudioC0D0: Front Mic=0x19
[ 81.662571] sound hdaudioC0D0: Rear Mic=0x18
[ 81.662576] sound hdaudioC0D0: Line=0x1a
[ 81.674344] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 81.674544] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 81.674722] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 81.911891] Bluetooth: Core ver 2.20
[ 81.911941] NET: Registered protocol family 31
[ 81.911946] Bluetooth: HCI device and connection manager initialized
[ 81.911956] Bluetooth: HCI socket layer initialized
[ 81.911964] Bluetooth: L2CAP socket layer initialized
[ 81.911980] Bluetooth: SCO socket layer initialized
[ 81.927170] Bluetooth: RFCOMM TTY layer initialized
[ 81.927190] Bluetooth: RFCOMM socket layer initialized
[ 81.927204] Bluetooth: RFCOMM ver 1.11
[ 82.138341] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 82.138350] Bluetooth: BNEP filters: protocol multicast
[ 82.138362] Bluetooth: BNEP socket layer initialized
[ 82.759960] r8169 0000:02:00.0 eth0: link down
[ 82.759988] r8169 0000:02:00.0 eth0: link down
[ 82.760071] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 82.879185] init: samba-ad-dc main process (1303) terminated with status 1
[ 83.232445] init: Failed to spawn thermald main process: unable to execute: No such file or directory
[ 83.254007] sound hdaudioC1D1: HDMI: audio coding type 0 not expected
[ 83.287355] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input7
[ 83.287611] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input8
[ 83.287799] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input9
[ 83.287969] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input10 et dmesg.0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-47-generic (buildd@lgw01-19) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53~14.04.1-Ubuntu SMP Mon Jan 18 16:09:14 UTC 2016 (Ubuntu 3.19.0-47.53~14.04.1-generic 3.19.8-ckt10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-47-generic root=UUID=cd78ba11-9fb1-4cef-877b-d7c5dc7b34fc ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 008f000000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008cfa7fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008cfa8000-0x000000008cfd7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008cfd8000-0x000000008d013fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008d014000-0x000000008d0d2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008d0d3000-0x000000008e3d1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e3d2000-0x000000008e3d2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e3d3000-0x000000008e3dafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008e3db000-0x000000008e52ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e530000-0x000000008ec39fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ec3a000-0x000000008ec70fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ec71000-0x000000008eff0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008eff1000-0x000000008effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM1B-M, BIOS P1.50 04/29/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFF0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000024f000000 aka 9456M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0x90000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x8f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24ee00000-0x24effffff]
[ 0.000000] [mem 0x24ee00000-0x24effffff] page 2M
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x24edfffff]
[ 0.000000] [mem 0x240000000-0x24edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[ 0.000000] [mem 0x220000000-0x23fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x8cfa7fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x8cdfffff] page 2M
[ 0.000000] [mem 0x8ce00000-0x8cfa7fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8cfd8000-0x8d013fff]
[ 0.000000] [mem 0x8cfd8000-0x8d013fff] page 4k
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x8e3d2000-0x8e3d2fff]
[ 0.000000] [mem 0x8e3d2000-0x8e3d2fff] page 4k
[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x8e3db000-0x8e52ffff]
[ 0.000000] [mem 0x8e3db000-0x8e52ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8ec3a000-0x8ec70fff]
[ 0.000000] [mem 0x8ec3a000-0x8ec70fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8eff1000-0x8effffff]
[ 0.000000] [mem 0x8eff1000-0x8effffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] [mem 0x100000000-0x21fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x349d0000-0x364dffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000008D098080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000008D09D750 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x000000008D098190 0055B9 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000008D0C9E80 000040
[ 0.000000] ACPI: APIC 0x000000008D09D860 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000008D09D8E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000008D09D928 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000008D09D968 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: AAFT 0x000000008D09D9A0 00017D (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000008D09DB20 00096C (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000008D09E490 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000008D0A2B48 0003A8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000008D0A2EF0 0006CA (v01 AMD CPMADPS4 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000008D0A35C0 001120 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x24eff6000-0x24effafff]
[ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246e00000-ffff88024e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x24effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x8cfa7fff]
[ 0.000000] node 0: [mem 0x8cfd8000-0x8d013fff]
[ 0.000000] node 0: [mem 0x8e3d2000-0x8e3d2fff]
[ 0.000000] node 0: [mem 0x8e3db000-0x8e52ffff]
[ 0.000000] node 0: [mem 0x8ec3a000-0x8ec70fff]
[ 0.000000] node 0: [mem 0x8eff1000-0x8effffff]
[ 0.000000] node 0: [mem 0x100000000-0x24effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x24effffff]
[ 0.000000] On node 0 totalpages: 1949981
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8966 pages used for memmap
[ 0.000000] DMA32 zone: 573824 pages, LIFO batch:31
[ 0.000000] Normal zone: 21440 pages used for memmap
[ 0.000000] Normal zone: 1372160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8cfa8000-0x8cfd7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d014000-0x8d0d2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d0d3000-0x8e3d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e3d3000-0x8e3dafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e530000-0x8ec39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ec71000-0x8eff0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x8f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88024ec00000 s86144 r8192 d32640 u524288
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1919490
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-47-generic root=UUID=cd78ba11-9fb1-4cef-877b-d7c5dc7b34fc ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0x84000000-0x87ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0x84000000-0x87ffffff]
[ 0.000000] Memory: 7500640K/7799924K available (7922K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 299284K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:1000 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1299.963 MHz processor
[ 0.000067] Calibrating delay loop (skipped), value calculated using timer frequency.. 2599.92 BogoMIPS (lpj=5199852)
[ 0.000156] pid_max: default: 32768 minimum: 301
[ 0.000211] ACPI: Core revision 20141107
[ 0.021468] ACPI: All ACPI Tables successfully acquired
[ 0.021623] Security Framework initialized
[ 0.021695] AppArmor: AppArmor initialized
[ 0.021739] Yama: becoming mindful.
[ 0.023119] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028152] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.030417] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030500] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.031135] Initializing cgroup subsys memory
[ 0.031191] Initializing cgroup subsys devices
[ 0.031244] Initializing cgroup subsys freezer
[ 0.031291] Initializing cgroup subsys net_cls
[ 0.031339] Initializing cgroup subsys blkio
[ 0.031385] Initializing cgroup subsys perf_event
[ 0.031432] Initializing cgroup subsys net_prio
[ 0.031479] Initializing cgroup subsys hugetlb
[ 0.031570] CPU: Physical Processor ID: 0
[ 0.032575] CPU: Processor Core ID: 0
[ 0.032618] mce: CPU supports 6 MCE banks
[ 0.032671] LVT offset 1 assigned for vector 0xf9
[ 0.032721] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.032721] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.033000] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[ 0.037716] ftrace: allocating 30027 entries in 118 pages
[ 0.063235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.102990] smpboot: CPU0: AMD Sempron(tm) 3850 APU with Radeon(tm) R3 (fam: 16, model: 00, stepping: 01)
[ 0.210847] Performance Events: AMD PMU driver.
[ 0.210924] ... version: 0
[ 0.210966] ... bit width: 48
[ 0.211008] ... generic registers: 4
[ 0.211049] ... value mask: 0000ffffffffffff
[ 0.211092] ... max period: 00007fffffffffff
[ 0.211135] ... fixed-purpose events: 0
[ 0.211177] ... event mask: 000000000000000f
[ 0.213032] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.213363] x86: Booting SMP configuration:
[ 0.213408] .... node #0, CPUs: #1 #2 #3
[ 0.253580] x86: Booted up 1 node, 4 CPUs
[ 0.253671] smpboot: Total of 4 processors activated (10399.70 BogoMIPS)
[ 0.255116] devtmpfs: initialized
[ 0.265753] evm: security.selinux
[ 0.265796] evm: security.SMACK64
[ 0.265837] evm: security.SMACK64EXEC
[ 0.265879] evm: security.SMACK64TRANSMUTE
[ 0.265920] evm: security.SMACK64MMAP
[ 0.265961] evm: security.ima
[ 0.266001] evm: security.capability
[ 0.266224] PM: Registering ACPI NVS region [mem 0x8d014000-0x8d0d2fff] (782336 bytes)
[ 0.266313] PM: Registering ACPI NVS region [mem 0x8e3d3000-0x8e3dafff] (32768 bytes)
[ 0.266717] pinctrl core: initialized pinctrl subsystem
[ 0.266999] RTC time: 18:46:37, date: 02/13/16
[ 0.267288] NET: Registered protocol family 16
[ 0.274718] cpuidle: using governor ladder
[ 0.282740] cpuidle: using governor menu
[ 0.283020] ACPI: bus type PCI registered
[ 0.283068] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.283318] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.283379] PCI: not using MMCONFIG
[ 0.283421] PCI: Using configuration type 1 for base access
[ 0.283464] PCI: Using configuration type 1 for extended access
[ 0.284202] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.284247] mtrr: probably your BIOS does not setup all CPUs.
[ 0.284290] mtrr: corrected configuration.
[ 0.296032] ACPI: Added _OSI(Module Device)
[ 0.296086] ACPI: Added _OSI(Processor Device)
[ 0.296130] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.296174] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.301922] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.311814] ACPI: Interpreter enabled
[ 0.311874] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.311995] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.312143] ACPI: (supports S0 S3 S4 S5)
[ 0.312186] ACPI: Using IOAPIC for interrupt routing
[ 0.312280] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.312439] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.313448] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.325921] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.326825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.326891] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.327401] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.327883] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.328862] PCI host bridge to bus 0000:00
[ 0.328911] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.328957] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.329004] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.329051] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.329097] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.329144] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.329191] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.329238] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
[ 0.329296] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.329501] pci 0000:00:01.0: [1002:9836] type 00 class 0x030000
[ 0.329525] pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.329542] pci 0000:00:01.0: reg 0x18: [mem 0xd2000000-0xd27fffff 64bit pref]
[ 0.329554] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.329565] pci 0000:00:01.0: reg 0x24: [mem 0xfe200000-0xfe23ffff]
[ 0.329577] pci 0000:00:01.0: reg 0x30: [mem 0xfe240000-0xfe25ffff pref]
[ 0.329641] pci 0000:00:01.0: supports D1 D2
[ 0.329647] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.329818] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.330005] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[ 0.330111] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.330196] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.330338] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.330443] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.330526] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 0.330693] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.330721] pci 0000:00:10.0: reg 0x10: [mem 0xfe264000-0xfe265fff 64bit]
[ 0.330850] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.330936] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.331086] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.331112] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.331125] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.331137] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.331150] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.331162] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.331175] pci 0000:00:11.0: reg 0x24: [mem 0xfe26a000-0xfe26a3ff]
[ 0.331242] pci 0000:00:11.0: PME# supported from D3hot
[ 0.331399] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.331418] pci 0000:00:12.0: reg 0x10: [mem 0xfe269000-0xfe269fff]
[ 0.331547] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.331687] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.331711] pci 0000:00:12.2: reg 0x10: [mem 0xfe268000-0xfe2680ff]
[ 0.331804] pci 0000:00:12.2: supports D1 D2
[ 0.331810] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.331889] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.332028] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.332046] pci 0000:00:13.0: reg 0x10: [mem 0xfe267000-0xfe267fff]
[ 0.332176] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.332313] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.332337] pci 0000:00:13.2: reg 0x10: [mem 0xfe266000-0xfe2660ff]
[ 0.332430] pci 0000:00:13.2: supports D1 D2
[ 0.332436] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332510] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.332648] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.332852] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.332878] pci 0000:00:14.2: reg 0x10: [mem 0xfe260000-0xfe263fff 64bit]
[ 0.332955] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.333029] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.333160] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.333377] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.333536] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.333692] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.333848] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.334011] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.334165] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.334444] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[ 0.334465] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.334482] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.334499] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.334511] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.334523] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.334712] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.334735] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.343068] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.343163] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.343176] pci 0000:00:02.1: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.343192] pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.343535] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.343577] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.343623] pci 0000:02:00.0: reg 0x18: [mem 0xfe100000-0xfe100fff 64bit]
[ 0.343655] pci 0000:02:00.0: reg 0x20: [mem 0xd2800000-0xd2803fff 64bit pref]
[ 0.343821] pci 0000:02:00.0: supports D1 D2
[ 0.343830] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343931] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.351056] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.351119] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
[ 0.351128] pci 0000:00:02.3: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.351139] pci 0000:00:02.3: bridge window [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.352216] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 *10 11 14 15)
[ 0.352668] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
[ 0.353122] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
[ 0.353573] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
[ 0.353999] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
[ 0.354399] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.354827] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.355267] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.356370] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.356417] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.356481] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.356537] vgaarb: loaded
[ 0.356578] vgaarb: bridge control possible 0000:01:00.0
[ 0.356622] vgaarb: no bridge control possible 0000:00:01.0
[ 0.357267] SCSI subsystem initialized
[ 0.357494] libata version 3.00 loaded.
[ 0.357555] ACPI: bus type USB registered
[ 0.357641] usbcore: registered new interface driver usbfs
[ 0.357710] usbcore: registered new interface driver hub
[ 0.357800] usbcore: registered new device driver usb
[ 0.358219] PCI: Using ACPI for IRQ routing
[ 0.366223] PCI: pci_cache_line_size set to 64 bytes
[ 0.366300] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.366306] e820: reserve RAM buffer [mem 0x8cfa8000-0x8fffffff]
[ 0.366311] e820: reserve RAM buffer [mem 0x8d014000-0x8fffffff]
[ 0.366315] e820: reserve RAM buffer [mem 0x8e3d3000-0x8fffffff]
[ 0.366319] e820: reserve RAM buffer [mem 0x8e530000-0x8fffffff]
[ 0.366323] e820: reserve RAM buffer [mem 0x8ec71000-0x8fffffff]
[ 0.366327] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[ 0.366330] e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff]
[ 0.366590] NetLabel: Initializing
[ 0.366634] NetLabel: domain hash size = 128
[ 0.366675] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.366745] NetLabel: unlabeled traffic allowed by default
[ 0.366969] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.367127] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.369292] Switched to clocksource hpet
[ 0.383670] AppArmor: AppArmor Filesystem Enabled
[ 0.383879] pnp: PnP ACPI init
[ 0.384207] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.384260] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.384465] system 00:01: [mem 0x90000000-0xafffffff] has been reserved
[ 0.384515] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384782] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.384832] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.385559] pnp 00:03: [dma 3]
[ 0.385806] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.385908] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.385989] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.386134] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.386184] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.386291] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.386646] pnp 00:08: [dma 0 disabled]
[ 0.386749] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.387473] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.387522] system 00:09: [io 0x040b] has been reserved
[ 0.387568] system 00:09: [io 0x04d6] has been reserved
[ 0.387614] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.387660] system 00:09: [io 0x0c14] has been reserved
[ 0.387706] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.387752] system 00:09: [io 0x0c52] has been reserved
[ 0.387798] system 00:09: [io 0x0c6c] has been reserved
[ 0.387843] system 00:09: [io 0x0c6f] has been reserved
[ 0.387889] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.387936] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.387982] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.388028] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.388074] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.388121] system 00:09: [io 0x0800-0x089f] could not be reserved
[ 0.388168] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.388214] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.388260] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.388306] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.388355] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.388403] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.388451] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.388499] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.388546] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.388594] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.388642] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.388691] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.389204] pnp: PnP ACPI: found 10 devices
[ 0.399209] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.399259] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.399310] pci 0000:00:02.1: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.399359] pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.399420] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.399466] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
[ 0.399515] pci 0000:00:02.3: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.399564] pci 0000:00:02.3: bridge window [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.399625] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.399631] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.399635] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.399640] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.399645] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.399650] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.399655] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
[ 0.399661] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.399665] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.399671] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.399676] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.399681] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.399686] pci_bus 0000:02: resource 2 [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.399749] NET: Registered protocol family 2
[ 0.400252] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.400721] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.401109] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.401213] TCP: reno registered
[ 0.401284] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.401435] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.401668] NET: Registered protocol family 1
[ 0.401751] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.593845] PCI: CLS 64 bytes, default 64
[ 0.594007] Trying to unpack rootfs image as initramfs...
[ 1.646515] Freeing initrd memory: 27712K (ffff8800349d0000 - ffff8800364e0000)
[ 1.648187] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.648239] software IO TLB [mem 0x88fa8000-0x8cfa8000] (64MB) mapped at [ffff880088fa8000-ffff88008cfa7fff]
[ 1.648741] perf: AMD NB counters detected
[ 1.648788] perf: AMD L2I counters detected
[ 1.648993] microcode: CPU0: patch_level=0x0700010b
[ 1.649046] microcode: CPU1: patch_level=0x0700010b
[ 1.649103] microcode: CPU2: patch_level=0x0700010b
[ 1.649160] microcode: CPU3: patch_level=0x0700010b
[ 1.649366] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.649433] LVT offset 0 assigned for vector 0x400
[ 1.649503] perf: AMD IBS detected (0x000000ff)
[ 1.649608] Scanning for low memory corruption every 60 seconds
[ 1.650556] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.650640] Initialise system trusted keyring
[ 1.650732] audit: initializing netlink subsys (disabled)
[ 1.650818] audit: type=2000 audit(1455389197.536:1): initialized
[ 1.651715] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.655725] zpool: loaded
[ 1.655771] zbud: loaded
[ 1.656176] VFS: Disk quotas dquot_6.5.2
[ 1.656304] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.657582] fuse init (API version 7.23)
[ 1.657996] Key type big_key registered
[ 1.658973] Key type asymmetric registered
[ 1.659020] Asymmetric key parser 'x509' registered
[ 1.659155] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.659307] io scheduler noop registered
[ 1.659354] io scheduler deadline registered (default)
[ 1.659475] io scheduler cfq registered
[ 1.660149] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.660233] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.660537] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.660601] ACPI: Power Button [PWRB]
[ 1.660746] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.660804] ACPI: Power Button [PWRF]
[ 1.660984] ACPI: acpi_idle registered with cpuidle
[ 1.661805] GHES: HEST is not enabled!
[ 1.662068] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.682590] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.686610] Linux agpgart interface v0.103
[ 1.690043] brd: module loaded
[ 1.691841] loop: module loaded
[ 1.692391] libphy: Fixed MDIO Bus: probed
[ 1.692439] tun: Universal TUN/TAP device driver, 1.6
[ 1.692482] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.692636] PPP generic driver version 2.4.2
[ 1.693012] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.693072] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.693608] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.693657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.693713] usb usb1: Product: xHCI Host Controller
[ 1.693758] usb usb1: Manufacturer: Linux 3.19.0-47-generic xhci-hcd
[ 1.693818] usb usb1: SerialNumber: 0000:00:10.0
[ 1.694128] hub 1-0:1.0: USB hub found
[ 1.694192] hub 1-0:1.0: 2 ports detected
[ 1.694452] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.694502] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.696729] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.696847] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.696895] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.696950] usb usb2: Product: xHCI Host Controller
[ 1.696994] usb usb2: Manufacturer: Linux 3.19.0-47-generic xhci-hcd
[ 1.697039] usb usb2: SerialNumber: 0000:00:10.0
[ 1.697353] hub 2-0:1.0: USB hub found
[ 1.697414] hub 2-0:1.0: 2 ports detected
[ 1.697680] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.697735] ehci-pci: EHCI PCI platform driver
[ 1.697944] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.697998] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.698058] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.698125] ehci-pci 0000:00:12.2: debug port 1
[ 1.698223] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe268000
[ 1.710044] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.710362] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.710434] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.710518] usb usb3: Product: EHCI Host Controller
[ 1.710583] usb usb3: Manufacturer: Linux 3.19.0-47-generic ehci_hcd
[ 1.710651] usb usb3: SerialNumber: 0000:00:12.2
[ 1.711300] hub 3-0:1.0: USB hub found
[ 1.711392] hub 3-0:1.0: 4 ports detected
[ 1.712275] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.712357] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.712447] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.712549] ehci-pci 0000:00:13.2: debug port 1
[ 1.712685] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe266000
[ 1.722029] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.722255] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.722304] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.722361] usb usb4: Product: EHCI Host Controller
[ 1.722406] usb usb4: Manufacturer: Linux 3.19.0-47-generic ehci_hcd
[ 1.722452] usb usb4: SerialNumber: 0000:00:13.2
[ 1.722862] hub 4-0:1.0: USB hub found
[ 1.722925] hub 4-0:1.0: 4 ports detected
[ 1.723292] ehci-platform: EHCI generic platform driver
[ 1.723366] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.723420] ohci-pci: OHCI PCI platform driver
[ 1.723669] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.723727] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.723853] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe269000
[ 1.782151] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.782209] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.782266] usb usb5: Product: OHCI PCI host controller
[ 1.782311] usb usb5: Manufacturer: Linux 3.19.0-47-generic ohci_hcd
[ 1.782357] usb usb5: SerialNumber: 0000:00:12.0
[ 1.782777] hub 5-0:1.0: USB hub found
[ 1.782841] hub 5-0:1.0: 4 ports detected
[ 1.783383] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.783444] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.783541] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe267000
[ 1.842178] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.842237] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.842294] usb usb6: Product: OHCI PCI host controller
[ 1.842340] usb usb6: Manufacturer: Linux 3.19.0-47-generic ohci_hcd
[ 1.842386] usb usb6: SerialNumber: 0000:00:13.0
[ 1.842806] hub 6-0:1.0: USB hub found
[ 1.842869] hub 6-0:1.0: 4 ports detected
[ 1.843243] ohci-platform: OHCI generic platform driver
[ 1.843319] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.843511] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.843557] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.844175] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.844517] mousedev: PS/2 mouse device common for all mice
[ 1.844918] rtc_cmos 00:05: RTC can wake from S4
[ 1.845143] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.845217] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.845290] i2c /dev entries driver
[ 1.845500] device-mapper: uevent: version 1.0.3
[ 1.845713] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.845810] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.846224] PCCT header not found.
[ 1.846268] ACPI PCC probe failed.
[ 1.846544] TCP: cubic registered
[ 1.846850] NET: Registered protocol family 10
[ 1.847369] NET: Registered protocol family 17
[ 1.847438] Key type dns_resolver registered
[ 1.848313] Loading compiled-in X.509 certificates
[ 1.850932] Loaded X.509 cert 'Magrathea: Glacier signing key: 8335c30cf45ac8874b83816192bf33dddcb532b6'
[ 1.851037] registered taskstats version 1
[ 1.855999] Key type trusted registered
[ 1.864450] Key type encrypted registered
[ 1.864506] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.864556] ima: No TPM chip found, activating TPM-bypass!
[ 1.864651] evm: HMAC attrs: 0x1
[ 1.865317] Magic number: 4:98:797
[ 1.865565] rtc_cmos 00:05: setting system clock to 2016-02-13 18:46:38 UTC (1455389198)
[ 1.865895] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.866340] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.866385] EDD information not available.
[ 1.866626] PM: Hibernation image not present or could not be loaded.
[ 1.867437] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 1.867502] Write protecting the kernel read-only data: 12288k
[ 1.868037] Freeing unused kernel memory: 256K (ffff8800017c0000 - ffff880001800000)
[ 1.868361] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[ 1.873297] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.900952] systemd-udevd[123]: starting version 204
[ 1.948205] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.950566] ahci 0000:00:11.0: version 3.0
[ 1.951089] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.951156] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.952332] scsi host0: ahci
[ 1.953241] scsi host1: ahci
[ 1.953433] ata1: SATA max UDMA/133 abar m1024@0xfe26a000 port 0xfe26a100 irq 32
[ 1.953494] ata2: SATA max UDMA/133 abar m1024@0xfe26a000 port 0xfe26a180 irq 32
[ 1.955181] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000016000, d0:50:99:59:4f:a7, XID 0c000800 IRQ 33
[ 1.955250] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.955881] [drm] Initialized drm 1.1.0 20060810
[ 1.980683] wmi: Mapper loaded
[ 2.030538] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 2.031202] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280b1
[ 2.031251] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 2.031298] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 2.150214] nouveau [ VBIOS][0000:01:00.0] using image from PROM
[ 2.150567] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 2.150616] nouveau [ VBIOS][0000:01:00.0] version 70.18.49.00.00
[ 2.152532] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 2.152587] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 2.178043] usb 6-2: new low-speed USB device number 2 using ohci-pci
[ 2.201732] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 2.201844] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 2.201891] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 2.201936] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 2.204278] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 2.232613] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 2.232681] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 2.232732] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 2.252688] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[ 2.252752] nouveau [ CLK][0000:01:00.0] 0f: core 589 MHz shader 1402 MHz memory 500 MHz
[ 2.252847] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 2.253313] [TTM] Zone kernel: Available graphics memory: 3765194 kiB
[ 2.253359] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.253405] [TTM] Initializing pool allocator
[ 2.253456] [TTM] Initializing DMA pool allocator
[ 2.253521] nouveau [ DRM] VRAM: 1024 MiB
[ 2.253564] nouveau [ DRM] GART: 1048576 MiB
[ 2.253613] nouveau [ DRM] TMDS table version 2.0
[ 2.253658] nouveau [ DRM] DCB version 4.0
[ 2.253704] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 2.253750] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 2.253795] nouveau [ DRM] DCB outp 02: 02011362 00020010
[ 2.253841] nouveau [ DRM] DCB outp 03: 01022310 00000000
[ 2.253886] nouveau [ DRM] DCB conn 00: 00001030
[ 2.253958] nouveau [ DRM] DCB conn 01: 00002161
[ 2.254042] nouveau [ DRM] DCB conn 02: 00000200
[ 2.277993] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.278055] [drm] Driver supports precise vblank timestamp query.
[ 2.304412] nouveau [ DRM] MM: using COPY for buffer copies
[ 2.345322] usb 6-2: New USB device found, idVendor=1bcf, idProduct=0007
[ 2.345375] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.345427] usb 6-2: Product: USB Optical Mouse
[ 2.355314] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.365739] usbcore: registered new interface driver usbhid
[ 2.365790] usbhid: USB HID core driver
[ 2.369762] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/0003:1BCF:0007.0001/input/input3
[ 2.370272] hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 2.394369] nouveau [ DRM] allocated 1360x768 fb: 0x70000, bo ffff8800367c4400
[ 2.442174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.445803] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33
[ 2.446161] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.446875] ata2.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[ 2.446879] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.447644] ata2.00: configured for UDMA/133
[ 2.453234] ata1.00: configured for UDMA/33
[ 2.464041] Console: switching to colour frame buffer device 170x48
[ 2.465783] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.465800] nouveau 0000:01:00.0: registered panic notifier
[ 2.466208] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 2.646391] tsc: Refined TSC clocksource calibration: 1299.999 MHz
[ 3.647034] Switched to clocksource tsc
[ 23.962755] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 23.962797] scsi 0:0:0:0: CDB:
[ 23.962807] Inquiry: 12 00 00 00 60 00
[ 23.962856] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
[ 23.962856] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 23.962881] ata1.00: status: { DRDY }
[ 23.962897] ata1: hard resetting link
[ 24.454902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 24.466734] ata1.00: configured for UDMA/33
[ 24.469450] ata1: EH complete
[ 24.469483] scsi 0:0:0:0: scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[ 24.475415] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0015 PQ: 0 ANSI: 5
[ 29.488874] ata1.00: qc timeout (cmd 0xa0)
[ 29.489399] ata1: limiting SATA link speed to 1.5 Gbps
[ 29.489884] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 29.490368] ata1.00: irq_stat 0x40000001
[ 29.490861] scsi 0:0:0:0: CDB:
[ 29.491344] Inquiry: 12 01 00 00 ff 00
[ 29.491868] ata1.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 4 dma 16640 in
[ 29.491868] res 51/54:03:00:00:01/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 29.492867] ata1.00: status: { DRDY ERR }
[ 29.493368] ata1: hard resetting link
[ 29.985052] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 30.001558] ata1.00: configured for UDMA/33
[ 30.005304] ata1: EH complete
[ 61.033201] ata1.00: limiting speed to UDMA/25:PIO4
[ 61.033233] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 61.033252] sr 0:0:0:0: CDB:
[ 61.033259] Mode Sense(10): 5a 00 2a 00 00 00 00 00 80 00
[ 61.033299] ata1.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 6 dma 16512 in
[ 61.033299] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 61.033321] ata1.00: status: { DRDY }
[ 61.033334] ata1: hard resetting link
[ 61.525359] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 61.543464] ata1.00: configured for UDMA/25
[ 61.547779] ata1: EH complete
[ 61.547811] sr 0:0:0:0: [sr0] scsi-1 drive
[ 61.547827] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 61.548211] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 61.548376] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 61.548686] scsi 1:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
[ 61.549161] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 61.549183] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 61.549229] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 61.549331] sd 1:0:0:0: [sda] Write Protect is off
[ 61.549345] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 61.549424] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 61.645037] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 61.646424] sd 1:0:0:0: [sda] Attached SCSI disk
[ 67.140977] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 67.141002] EXT4-fs (sda3): write access will be enabled during recovery
[ 67.206551] random: nonblocking pool is initialized
[ 67.676697] EXT4-fs (sda3): recovery complete
[ 67.683945] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 68.924265] ata1.00: limiting speed to PIO4
[ 68.924297] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 68.924316] sr 0:0:0:0: CDB:
[ 68.924323] Xdread, Read track info: 52 01 00 00 00 01 00 00 20 00
[ 68.924367] ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 19 dma 16416 in
[ 68.924367] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 68.924388] ata1.00: status: { DRDY }
[ 68.924402] ata1: hard resetting link
[ 69.416457] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 69.432483] ata1.00: configured for PIO4
[ 69.436519] ata1: EH complete
[ 69.436550] sr 0:0:0:0: [sr0] CDROM (ioctl) error, command:
[ 69.436569] Xdread, Read track info 52 01 00 00 00 01 00 00 20 00
[ 69.436602] sr 0:0:0:0: [sr0] Sense Key : Aborted Command [current] [descriptor]
[ 69.436616] sr 0:0:0:0: [sr0] Add. Sense: No additional sense information
[ 77.750283] init: bootchart main process (361) terminated with status 127
[ 77.856463] systemd-udevd[386]: starting version 204
[ 77.951580] init: bootchart post-stop process (381) terminated with status 127
[ 78.298775] parport_pc 00:03: reported by Plug and Play ACPI
[ 78.298817] parport0: PC-style at 0x378, irq 5 [PCSPP,EPP]
[ 78.321320] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 78.322282] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 78.329368] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 78.332608] MCE: In-kernel MCE decoding enabled.
[ 78.388728] EDAC MC: Ver: 3.0.0
[ 78.412087] lp0: using parport0 (interrupt-driven).
[ 78.422090] AMD64 EDAC driver v3.4.0
[ 78.422159] EDAC amd64: DRAM ECC disabled.
[ 78.422170] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 78.422170] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 78.422170] (Note that use of the override may cause unknown side effects.)
[ 78.553758] ppdev: user-space parallel port driver
[ 78.613292] AVX version of gcm_enc/dec engaged.
[ 78.613300] AES CTR mode by8 optimization enabled
[ 78.643624] audit: type=1400 audit(1455389275.244:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=818 comm="apparmor_parser"
[ 78.643643] audit: type=1400 audit(1455389275.244:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=818 comm="apparmor_parser"
[ 78.643657] audit: type=1400 audit(1455389275.244:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
[ 78.644767] audit: type=1400 audit(1455389275.248:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=818 comm="apparmor_parser"
[ 78.644787] audit: type=1400 audit(1455389275.248:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
[ 78.645337] audit: type=1400 audit(1455389275.248:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
[ 78.652003] audit: type=1400 audit(1455389275.256:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=838 comm="apparmor_parser"
[ 78.778369] [drm] radeon kernel modesetting enabled.
[ 78.944121] kvm: Nested Virtualization enabled
[ 78.944132] kvm: Nested Paging enabled
[ 79.009803] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 79.009812] AMD IOMMUv2 functionality not available on this system
[ 79.081217] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 79.081242] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 79.128982] Found CRAT image with size=936
[ 79.128991] Parsing CRAT table with 1 nodes
[ 79.128997] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 79.129001] CU CPU: cores=4 id_base=0
[ 79.129005] Found memory entry in CRAT table with proximity_domain=0
[ 79.129009] Found memory entry in CRAT table with proximity_domain=0
[ 79.129012] Found cache entry in CRAT table with processor_id=0
[ 79.129015] Found cache entry in CRAT table with processor_id=0
[ 79.129018] Found cache entry in CRAT table with processor_id=0
[ 79.129022] Found cache entry in CRAT table with processor_id=1
[ 79.129025] Found cache entry in CRAT table with processor_id=1
[ 79.129028] Found cache entry in CRAT table with processor_id=1
[ 79.129030] Found cache entry in CRAT table with processor_id=2
[ 79.129033] Found cache entry in CRAT table with processor_id=2
[ 79.129036] Found cache entry in CRAT table with processor_id=2
[ 79.129038] Found cache entry in CRAT table with processor_id=3
[ 79.129041] Found cache entry in CRAT table with processor_id=3
[ 79.129044] Found cache entry in CRAT table with processor_id=3
[ 79.129046] Creating topology SYSFS entries
[ 79.129109] Finished initializing topology ret=0
[ 79.130638] kfd kfd: Initialized module
[ 79.131951] [drm] initializing kernel modesetting (KABINI 0x1002:0x9836 0x1849:0x9836).
[ 79.132021] [drm] register mmio base: 0xFE200000
[ 79.132025] [drm] register mmio size: 262144
[ 79.132044] [drm] doorbell mmio base: 0xD2000000
[ 79.132048] [drm] doorbell mmio size: 8388608
[ 79.132130] ATOM BIOS: AMD
[ 79.132237] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 79.132244] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 79.132249] [drm] Detected VRAM RAM=512M, BAR=256M
[ 79.132253] [drm] RAM width 128bits DDR
[ 79.132286] [drm] radeon: 512M of VRAM memory ready
[ 79.132291] [drm] radeon: 1024M of GTT memory ready.
[ 79.132318] [drm] Loading kabini Microcode
[ 79.153394] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 79.153405] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 79.153412] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 79.153417] sound hdaudioC0D0: mono: mono_out=0x0
[ 79.153421] sound hdaudioC0D0: inputs:
[ 79.153428] sound hdaudioC0D0: Front Mic=0x19
[ 79.153434] sound hdaudioC0D0: Rear Mic=0x18
[ 79.153439] sound hdaudioC0D0: Line=0x1a
[ 79.171462] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 79.171750] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 79.171977] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 79.400724] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 79.517418] [drm] Internal thermal controller without fan control
[ 79.518729] [drm] radeon: dpm initialized
[ 79.595237] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 79.595263] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 79.604037] [drm] PCIE GART of 1024M enabled (table at 0x000000000078C000).
[ 79.604304] radeon 0000:00:01.0: WB enabled
[ 79.604332] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88024393ac00
[ 79.604339] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88024393ac04
[ 79.604345] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88024393ac08
[ 79.604351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88024393ac0c
[ 79.604357] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88024393ac10
[ 79.605274] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90012b36c98
[ 79.605378] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff88024393ac18
[ 79.605384] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff88024393ac1c
[ 79.605390] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 79.605393] [drm] Driver supports precise vblank timestamp query.
[ 79.605452] radeon 0000:00:01.0: radeon: using MSI.
[ 79.605497] [drm] radeon: irq initialized.
[ 79.610298] [drm] ring test on 0 succeeded in 3 usecs
[ 79.610398] [drm] ring test on 1 succeeded in 2 usecs
[ 79.610423] [drm] ring test on 2 succeeded in 2 usecs
[ 79.610669] [drm] ring test on 3 succeeded in 4 usecs
[ 79.610680] [drm] ring test on 4 succeeded in 4 usecs
[ 79.656431] [drm] ring test on 5 succeeded in 1 usecs
[ 79.676325] [drm] UVD initialized successfully.
[ 79.785646] [drm] ring test on 6 succeeded in 16 usecs
[ 79.785664] [drm] ring test on 7 succeeded in 3 usecs
[ 79.785667] [drm] VCE initialized successfully.
[ 79.789947] [drm] ib test on ring 0 succeeded in 0 usecs
[ 80.186363] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 80.288525] [drm] ib test on ring 1 succeeded in 0 usecs
[ 80.652781] sound hdaudioC1D1: HDMI: audio coding type 0 not expected
[ 80.686426] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input7
[ 80.692839] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input8
[ 80.693053] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input9
[ 80.693255] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input10
[ 80.708489] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 80.788726] [drm] ib test on ring 2 succeeded in 0 usecs
[ 80.788819] [drm] ib test on ring 3 succeeded in 0 usecs
[ 80.788888] [drm] ib test on ring 4 succeeded in 0 usecs
[ 81.314347] [drm] ib test on ring 5 succeeded
[ 81.335016] [drm] ib test on ring 6 succeeded
[ 81.335641] [drm] ib test on ring 7 succeeded
[ 81.338997] [drm] Radeon Display Connectors
[ 81.339005] [drm] Connector 0:
[ 81.339009] [drm] DP-1
[ 81.339012] [drm] HPD1
[ 81.339017] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 81.339020] [drm] Encoders:
[ 81.339023] [drm] DFP1: INTERNAL_UNIPHY
[ 81.339026] [drm] Connector 1:
[ 81.339029] [drm] HDMI-A-2
[ 81.339031] [drm] HPD2
[ 81.339036] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 81.339038] [drm] Encoders:
[ 81.339041] [drm] DFP2: INTERNAL_UNIPHY
[ 81.339044] [drm] Connector 2:
[ 81.339046] [drm] VGA-2
[ 81.339050] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 81.339053] [drm] Encoders:
[ 81.339056] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 81.387753] [drm] fb mappable at 0xB0990000
[ 81.387761] [drm] vram apper at 0xB0000000
[ 81.387764] [drm] size 5242880
[ 81.387768] [drm] fb depth is 24
[ 81.387771] [drm] pitch is 5120
[ 81.387957] fbcon: radeondrmfb (fb1) is primary device
[ 81.387960] fbcon: Remapping primary device, fb1, to tty 1-63
[ 81.460118] init: failsafe main process (1148) killed by TERM signal
[ 81.542329] FS-Cache: Loaded
[ 81.592983] RPC: Registered named UNIX socket transport module.
[ 81.592985] RPC: Registered udp transport module.
[ 81.592986] RPC: Registered tcp transport module.
[ 81.592987] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 81.726657] FS-Cache: Netfs 'nfs' registered for caching
[ 81.842086] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 81.980910] radeon 0000:00:01.0: fb1: radeondrmfb frame buffer device
[ 81.988548] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 1
[ 82.824045] init: samba-ad-dc main process (1175) terminated with status 1
[ 82.999457] audit: type=1400 audit(1455389279.600:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1341 comm="apparmor_parser"
[ 82.999473] audit: type=1400 audit(1455389279.600:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1341 comm="apparmor_parser"
[ 83.000522] audit: type=1400 audit(1455389279.600:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1341 comm="apparmor_parser"
[ 83.002177] Bluetooth: Core ver 2.20
[ 83.002212] NET: Registered protocol family 31
[ 83.002214] Bluetooth: HCI device and connection manager initialized
[ 83.002312] Bluetooth: HCI socket layer initialized
[ 83.002317] Bluetooth: L2CAP socket layer initialized
[ 83.002331] Bluetooth: SCO socket layer initialized
[ 83.061471] Bluetooth: RFCOMM TTY layer initialized
[ 83.061494] Bluetooth: RFCOMM socket layer initialized
[ 83.061507] Bluetooth: RFCOMM ver 1.11
[ 83.142403] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 83.142413] Bluetooth: BNEP filters: protocol multicast
[ 83.142425] Bluetooth: BNEP socket layer initialized
[ 83.212126] init: cups main process (1380) killed by HUP signal
[ 83.212151] init: cups main process ended, respawning
[ 83.580279] r8169 0000:02:00.0 eth0: link down
[ 83.580306] r8169 0000:02:00.0 eth0: link down
[ 83.581211] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 83.620669] init: Failed to spawn thermald main process: unable to execute: No such file or directoryÇa fait beaucoup à lire ! 
Attention : Là je tourne sur système parfait (sauf à la déconnexion finale) car je démarre avec Super-Grub-Disk (en normal c'est vraiment trop pénible !)
D'avance Merci pour votre aide !
(Inutile de vous précipiter, le Dimanche c'est sacré 
Hors ligne
#4 Le 14/02/2016, à 02:06
- Rufus T. Firefly
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Salut,
Ce serait plus intéressant d'avoir un dmesg quand ça tourne mal. Parce que forcément, quand ça tourne bien, on ne peut pas voir dans les messages ce qui tourne mal...
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#5 Le 14/02/2016, à 09:07
- moko138
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Déjà, comme tu as deux cartes graphiques :
*-display
description: VGA compatible controller
produit: Kabini [Radeon HD 8280]
fabriquant: Advanced Micro Devices, Inc. [AMD/ATI]
identifiant matériel: 1
fonctionnalités: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
ressources: irq:36
*-display
description: VGA compatible controller
produit: GT218 [GeForce 210]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
ressources: irq:34deux questions se posent :
- Est-ce que ton noyau et le pilote nouveau prennent pleinement en charge cette nVidia ? C'est à vérifier.
- As-tu installé un gestionnaire de duo de cartes graphiques ?
- -
Ensuite, dans les deux dmesg, on lit, après un trou de huit secondes :
[ 77. ] init: bootchart main process (360) terminated with status 127
donc nous allons regarder dans /var/log/bootchart/
Si tu as installé bootchart, c'est pour t'en servir, non ?
Donne-nous déjà
ls -lh /var/log/bootchart/ - -
Montre aussi
cat /etc/apt/sources.list | grep -v "#"ls -lha .xsession*cat .xsession-errors | tail -n 30 - -
Enfin, dans les deux dmesg, on lit, après une minute, un trou de six secondes et :
[ 61. ] sd 1:0:0:0: [sda] Attached SCSI disk
[ 67. ] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 67. ] EXT4-fs (sda3): write access will be enabled during recovery
Il y a donc une 2nde grosse suspicion, sur le disque ou le système de fichiers (FS). Donne
cat /etc/fstab | grep -v "#" Et pour examiner l'état du FS de sda3, il faut voir le retour d'un fsck :
Démarre en live et donne le retour de
sudo fsck -yfv /dev/sdX3(tu remplaceras "X" par la lettre affectée en live à ton disque, préalablement repérée par
sudo parted -lc'est un L minuscule)
Et il faut aussi, toujours en live, examiner l'état du disque :
sudo apt-get install --no-install-recommends smartmontoolset, toujours en remplaçant X par la lettre exacte
faire sans ajouter de chiffre :
sudo smartctl -a /dev/sdXet donner le retour complet.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 14/02/2016, à 16:37
- Croa
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Nouveau dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-47-generic (buildd@lgw01-19) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53~14.04.1-Ubuntu SMP Mon Jan 18 16:09:14 UTC 2016 (Ubuntu 3.19.0-47.53~14.04.1-generic 3.19.8-ckt10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-47-generic root=UUID=cd78ba11-9fb1-4cef-877b-d7c5dc7b34fc ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 008f000000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008cfa7fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008cfa8000-0x000000008cfd7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008cfd8000-0x000000008d013fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008d014000-0x000000008d0d2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008d0d3000-0x000000008e3d1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e3d2000-0x000000008e3d2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e3d3000-0x000000008e3dafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008e3db000-0x000000008e52ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e530000-0x000000008ec39fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ec3a000-0x000000008ec70fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ec71000-0x000000008eff0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008eff1000-0x000000008effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM1B-M, BIOS P1.50 04/29/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFF0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000024f000000 aka 9456M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0x90000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x8f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24ee00000-0x24effffff]
[ 0.000000] [mem 0x24ee00000-0x24effffff] page 2M
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x24edfffff]
[ 0.000000] [mem 0x240000000-0x24edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[ 0.000000] [mem 0x220000000-0x23fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x8cfa7fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x8cdfffff] page 2M
[ 0.000000] [mem 0x8ce00000-0x8cfa7fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8cfd8000-0x8d013fff]
[ 0.000000] [mem 0x8cfd8000-0x8d013fff] page 4k
[ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x8e3d2000-0x8e3d2fff]
[ 0.000000] [mem 0x8e3d2000-0x8e3d2fff] page 4k
[ 0.000000] BRK [0x01fd9000, 0x01fd9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x8e3db000-0x8e52ffff]
[ 0.000000] [mem 0x8e3db000-0x8e52ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8ec3a000-0x8ec70fff]
[ 0.000000] [mem 0x8ec3a000-0x8ec70fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8eff1000-0x8effffff]
[ 0.000000] [mem 0x8eff1000-0x8effffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] [mem 0x100000000-0x21fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x349d0000-0x364dffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000008D098080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000008D09D750 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x000000008D098190 0055B9 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000008D0C9E80 000040
[ 0.000000] ACPI: APIC 0x000000008D09D860 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000008D09D8E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000008D09D928 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000008D09D968 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: AAFT 0x000000008D09D9A0 00017D (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000008D09DB20 00096C (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000008D09E490 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000008D0A2B48 0003A8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000008D0A2EF0 0006CA (v01 AMD CPMADPS4 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x000000008D0A35C0 001120 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x24eff6000-0x24effafff]
[ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246e00000-ffff88024e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x24effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x8cfa7fff]
[ 0.000000] node 0: [mem 0x8cfd8000-0x8d013fff]
[ 0.000000] node 0: [mem 0x8e3d2000-0x8e3d2fff]
[ 0.000000] node 0: [mem 0x8e3db000-0x8e52ffff]
[ 0.000000] node 0: [mem 0x8ec3a000-0x8ec70fff]
[ 0.000000] node 0: [mem 0x8eff1000-0x8effffff]
[ 0.000000] node 0: [mem 0x100000000-0x24effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x24effffff]
[ 0.000000] On node 0 totalpages: 1949981
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8966 pages used for memmap
[ 0.000000] DMA32 zone: 573824 pages, LIFO batch:31
[ 0.000000] Normal zone: 21440 pages used for memmap
[ 0.000000] Normal zone: 1372160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8cfa8000-0x8cfd7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d014000-0x8d0d2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d0d3000-0x8e3d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e3d3000-0x8e3dafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e530000-0x8ec39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ec71000-0x8eff0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x8f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88024ec00000 s86144 r8192 d32640 u524288
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1919490
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-47-generic root=UUID=cd78ba11-9fb1-4cef-877b-d7c5dc7b34fc ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0x84000000-0x87ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0x84000000-0x87ffffff]
[ 0.000000] Memory: 7500640K/7799924K available (7922K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 299284K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:1000 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1299.989 MHz processor
[ 0.000066] Calibrating delay loop (skipped), value calculated using timer frequency.. 2599.97 BogoMIPS (lpj=5199956)
[ 0.000073] pid_max: default: 32768 minimum: 301
[ 0.000087] ACPI: Core revision 20141107
[ 0.021336] ACPI: All ACPI Tables successfully acquired
[ 0.021395] Security Framework initialized
[ 0.021429] AppArmor: AppArmor initialized
[ 0.021433] Yama: becoming mindful.
[ 0.022752] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.027751] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.029972] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030005] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030556] Initializing cgroup subsys memory
[ 0.030572] Initializing cgroup subsys devices
[ 0.030583] Initializing cgroup subsys freezer
[ 0.030590] Initializing cgroup subsys net_cls
[ 0.030597] Initializing cgroup subsys blkio
[ 0.030603] Initializing cgroup subsys perf_event
[ 0.030610] Initializing cgroup subsys net_prio
[ 0.030617] Initializing cgroup subsys hugetlb
[ 0.030667] CPU: Physical Processor ID: 0
[ 0.030670] CPU: Processor Core ID: 0
[ 0.030675] mce: CPU supports 6 MCE banks
[ 0.030687] LVT offset 1 assigned for vector 0xf9
[ 0.030697] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.030697] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.030954] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[ 0.035517] ftrace: allocating 30027 entries in 118 pages
[ 0.060963] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.100673] smpboot: CPU0: AMD Sempron(tm) 3850 APU with Radeon(tm) R3 (fam: 16, model: 00, stepping: 01)
[ 0.206926] Performance Events: AMD PMU driver.
[ 0.206936] ... version: 0
[ 0.206939] ... bit width: 48
[ 0.206942] ... generic registers: 4
[ 0.206946] ... value mask: 0000ffffffffffff
[ 0.206949] ... max period: 00007fffffffffff
[ 0.206952] ... fixed-purpose events: 0
[ 0.206955] ... event mask: 000000000000000f
[ 0.208767] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.209042] x86: Booting SMP configuration:
[ 0.209047] .... node #0, CPUs: #1 #2 #3
[ 0.249056] x86: Booted up 1 node, 4 CPUs
[ 0.249067] smpboot: Total of 4 processors activated (10399.91 BogoMIPS)
[ 0.250502] devtmpfs: initialized
[ 0.261118] evm: security.selinux
[ 0.261122] evm: security.SMACK64
[ 0.261126] evm: security.SMACK64EXEC
[ 0.261129] evm: security.SMACK64TRANSMUTE
[ 0.261132] evm: security.SMACK64MMAP
[ 0.261134] evm: security.ima
[ 0.261137] evm: security.capability
[ 0.261321] PM: Registering ACPI NVS region [mem 0x8d014000-0x8d0d2fff] (782336 bytes)
[ 0.261357] PM: Registering ACPI NVS region [mem 0x8e3d3000-0x8e3dafff] (32768 bytes)
[ 0.261709] pinctrl core: initialized pinctrl subsystem
[ 0.261944] RTC time: 12:55:47, date: 02/14/16
[ 0.262196] NET: Registered protocol family 16
[ 0.266418] cpuidle: using governor ladder
[ 0.270439] cpuidle: using governor menu
[ 0.270667] ACPI: bus type PCI registered
[ 0.270674] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270883] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270890] PCI: not using MMCONFIG
[ 0.270894] PCI: Using configuration type 1 for base access
[ 0.270912] PCI: Using configuration type 1 for extended access
[ 0.271623] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.271627] mtrr: probably your BIOS does not setup all CPUs.
[ 0.271629] mtrr: corrected configuration.
[ 0.279562] ACPI: Added _OSI(Module Device)
[ 0.279571] ACPI: Added _OSI(Processor Device)
[ 0.279576] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.279580] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.285295] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.295104] ACPI: Interpreter enabled
[ 0.295123] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.295136] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.295176] ACPI: (supports S0 S3 S4 S5)
[ 0.295181] ACPI: Using IOAPIC for interrupt routing
[ 0.295235] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.295342] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.296298] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.308775] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.309636] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.309651] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.310108] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.310541] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.311491] PCI host bridge to bus 0000:00
[ 0.311500] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.311506] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.311512] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.311518] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.311523] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.311528] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.311534] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.311539] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
[ 0.311556] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.311765] pci 0000:00:01.0: [1002:9836] type 00 class 0x030000
[ 0.311790] pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.311806] pci 0000:00:01.0: reg 0x18: [mem 0xd2000000-0xd27fffff 64bit pref]
[ 0.311818] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.311829] pci 0000:00:01.0: reg 0x24: [mem 0xfe200000-0xfe23ffff]
[ 0.311841] pci 0000:00:01.0: reg 0x30: [mem 0xfe240000-0xfe25ffff pref]
[ 0.311905] pci 0000:00:01.0: supports D1 D2
[ 0.311911] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.312084] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.312273] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[ 0.312379] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.312465] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.312565] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.312669] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.312753] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 0.312880] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.312909] pci 0000:00:10.0: reg 0x10: [mem 0xfe264000-0xfe265fff 64bit]
[ 0.313031] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.313116] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.313225] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.313251] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.313264] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.313277] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.313289] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.313302] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.313315] pci 0000:00:11.0: reg 0x24: [mem 0xfe26a000-0xfe26a3ff]
[ 0.313382] pci 0000:00:11.0: PME# supported from D3hot
[ 0.313541] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.313560] pci 0000:00:12.0: reg 0x10: [mem 0xfe269000-0xfe269fff]
[ 0.313689] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.313786] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.313810] pci 0000:00:12.2: reg 0x10: [mem 0xfe268000-0xfe2680ff]
[ 0.313904] pci 0000:00:12.2: supports D1 D2
[ 0.313909] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.313988] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.314087] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.314105] pci 0000:00:13.0: reg 0x10: [mem 0xfe267000-0xfe267fff]
[ 0.314235] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.314331] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.314355] pci 0000:00:13.2: reg 0x10: [mem 0xfe266000-0xfe2660ff]
[ 0.314448] pci 0000:00:13.2: supports D1 D2
[ 0.314453] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314529] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.314625] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.314829] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.314855] pci 0000:00:14.2: reg 0x10: [mem 0xfe260000-0xfe263fff 64bit]
[ 0.314940] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.315015] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.315106] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.315322] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.315484] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.315639] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.315796] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.315960] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.316114] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.316389] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[ 0.316410] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.316428] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.316445] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.316457] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.316469] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.316657] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.316680] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.322977] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.322989] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.322997] pci 0000:00:02.1: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.323008] pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.323160] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.323187] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.323221] pci 0000:02:00.0: reg 0x18: [mem 0xfe100000-0xfe100fff 64bit]
[ 0.323244] pci 0000:02:00.0: reg 0x20: [mem 0xd2800000-0xd2803fff 64bit pref]
[ 0.323358] pci 0000:02:00.0: supports D1 D2
[ 0.323364] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.323421] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.331006] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.331024] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
[ 0.331033] pci 0000:00:02.3: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.331044] pci 0000:00:02.3: bridge window [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.332124] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 *10 11 14 15)
[ 0.332287] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
[ 0.332452] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
[ 0.332615] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
[ 0.332753] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
[ 0.332865] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.332978] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.333091] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.333878] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.333884] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.333897] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.333901] vgaarb: loaded
[ 0.333905] vgaarb: bridge control possible 0000:01:00.0
[ 0.333909] vgaarb: no bridge control possible 0000:00:01.0
[ 0.334508] SCSI subsystem initialized
[ 0.334681] libata version 3.00 loaded.
[ 0.334741] ACPI: bus type USB registered
[ 0.334788] usbcore: registered new interface driver usbfs
[ 0.334816] usbcore: registered new interface driver hub
[ 0.334857] usbcore: registered new device driver usb
[ 0.335241] PCI: Using ACPI for IRQ routing
[ 0.343203] PCI: pci_cache_line_size set to 64 bytes
[ 0.343280] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.343285] e820: reserve RAM buffer [mem 0x8cfa8000-0x8fffffff]
[ 0.343290] e820: reserve RAM buffer [mem 0x8d014000-0x8fffffff]
[ 0.343295] e820: reserve RAM buffer [mem 0x8e3d3000-0x8fffffff]
[ 0.343299] e820: reserve RAM buffer [mem 0x8e530000-0x8fffffff]
[ 0.343302] e820: reserve RAM buffer [mem 0x8ec71000-0x8fffffff]
[ 0.343306] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[ 0.343310] e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff]
[ 0.343567] NetLabel: Initializing
[ 0.343571] NetLabel: domain hash size = 128
[ 0.343573] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.343610] NetLabel: unlabeled traffic allowed by default
[ 0.343793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.343801] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.345921] Switched to clocksource hpet
[ 0.360279] AppArmor: AppArmor Filesystem Enabled
[ 0.360442] pnp: PnP ACPI init
[ 0.360728] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.360738] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.360943] system 00:01: [mem 0x90000000-0xafffffff] has been reserved
[ 0.360952] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.361218] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.361226] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.361946] pnp 00:03: [dma 3]
[ 0.362196] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.362298] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.362378] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.362522] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.362530] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.362637] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.362991] pnp 00:08: [dma 0 disabled]
[ 0.363093] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.363810] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.363817] system 00:09: [io 0x040b] has been reserved
[ 0.363823] system 00:09: [io 0x04d6] has been reserved
[ 0.363829] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.363835] system 00:09: [io 0x0c14] has been reserved
[ 0.363840] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.363846] system 00:09: [io 0x0c52] has been reserved
[ 0.363851] system 00:09: [io 0x0c6c] has been reserved
[ 0.363856] system 00:09: [io 0x0c6f] has been reserved
[ 0.363862] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.363867] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.363873] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.363878] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.363884] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.363889] system 00:09: [io 0x0800-0x089f] could not be reserved
[ 0.363895] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.363900] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.363906] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.363912] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.363919] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.363925] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.363932] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.363938] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.363944] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.363950] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.363956] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.363963] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.364476] pnp: PnP ACPI: found 10 devices
[ 0.374423] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.374432] pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
[ 0.374442] pci 0000:00:02.1: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.374450] pci 0000:00:02.1: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.374460] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.374466] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff]
[ 0.374474] pci 0000:00:02.3: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.374482] pci 0000:00:02.3: bridge window [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.374492] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.374497] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.374502] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.374507] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.374512] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.374517] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.374522] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
[ 0.374527] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.374532] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.374537] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.374543] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.374547] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.374553] pci_bus 0000:02: resource 2 [mem 0xd2800000-0xd28fffff 64bit pref]
[ 0.374615] NET: Registered protocol family 2
[ 0.375073] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.375490] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.375833] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.375902] TCP: reno registered
[ 0.375930] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.376011] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.376197] NET: Registered protocol family 1
[ 0.376241] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.570496] PCI: CLS 64 bytes, default 64
[ 0.570658] Trying to unpack rootfs image as initramfs...
[ 1.623964] Freeing initrd memory: 27712K (ffff8800349d0000 - ffff8800364e0000)
[ 1.624026] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.624033] software IO TLB [mem 0x88fa8000-0x8cfa8000] (64MB) mapped at [ffff880088fa8000-ffff88008cfa7fff]
[ 1.624511] perf: AMD NB counters detected
[ 1.624518] perf: AMD L2I counters detected
[ 1.624684] microcode: CPU0: patch_level=0x0700010b
[ 1.624696] microcode: CPU1: patch_level=0x0700010b
[ 1.624712] microcode: CPU2: patch_level=0x0700010b
[ 1.624728] microcode: CPU3: patch_level=0x0700010b
[ 1.624882] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.624895] LVT offset 0 assigned for vector 0x400
[ 1.624923] perf: AMD IBS detected (0x000000ff)
[ 1.624986] Scanning for low memory corruption every 60 seconds
[ 1.625801] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.625842] Initialise system trusted keyring
[ 1.625894] audit: initializing netlink subsys (disabled)
[ 1.625937] audit: type=2000 audit(1455454548.508:1): initialized
[ 1.626806] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.630754] zpool: loaded
[ 1.630762] zbud: loaded
[ 1.631104] VFS: Disk quotas dquot_6.5.2
[ 1.631193] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.632438] fuse init (API version 7.23)
[ 1.632789] Key type big_key registered
[ 1.633709] Key type asymmetric registered
[ 1.633716] Asymmetric key parser 'x509' registered
[ 1.633806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.633900] io scheduler noop registered
[ 1.633908] io scheduler deadline registered (default)
[ 1.633988] io scheduler cfq registered
[ 1.634643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.634685] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.634771] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 1.634775] vesafb: scrolling: redraw
[ 1.634780] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.635634] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010e80000, using 5120k, total 5120k
[ 1.635941] Console: switching to colour frame buffer device 160x64
[ 1.636004] fb0: VESA VGA frame buffer device
[ 1.636233] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.636243] ACPI: Power Button [PWRB]
[ 1.636351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.636358] ACPI: Power Button [PWRF]
[ 1.636488] ACPI: acpi_idle registered with cpuidle
[ 1.637289] GHES: HEST is not enabled!
[ 1.637517] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.658004] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.661922] Linux agpgart interface v0.103
[ 1.665254] brd: module loaded
[ 1.667058] loop: module loaded
[ 1.667582] libphy: Fixed MDIO Bus: probed
[ 1.667590] tun: Universal TUN/TAP device driver, 1.6
[ 1.667594] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.667708] PPP generic driver version 2.4.2
[ 1.668068] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.668085] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.668561] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.668567] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.668572] usb usb1: Product: xHCI Host Controller
[ 1.668577] usb usb1: Manufacturer: Linux 3.19.0-47-generic xhci-hcd
[ 1.668581] usb usb1: SerialNumber: 0000:00:10.0
[ 1.668851] hub 1-0:1.0: USB hub found
[ 1.668875] hub 1-0:1.0: 2 ports detected
[ 1.669100] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.669110] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.671694] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.671754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.671759] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.671764] usb usb2: Product: xHCI Host Controller
[ 1.671768] usb usb2: Manufacturer: Linux 3.19.0-47-generic xhci-hcd
[ 1.671772] usb usb2: SerialNumber: 0000:00:10.0
[ 1.672052] hub 2-0:1.0: USB hub found
[ 1.672074] hub 2-0:1.0: 2 ports detected
[ 1.672296] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.672309] ehci-pci: EHCI PCI platform driver
[ 1.672463] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.672476] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.672485] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.672499] ehci-pci 0000:00:12.2: debug port 1
[ 1.672558] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe268000
[ 1.682647] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.682799] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.682805] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.682811] usb usb3: Product: EHCI Host Controller
[ 1.682816] usb usb3: Manufacturer: Linux 3.19.0-47-generic ehci_hcd
[ 1.682821] usb usb3: SerialNumber: 0000:00:12.2
[ 1.683184] hub 3-0:1.0: USB hub found
[ 1.683213] hub 3-0:1.0: 4 ports detected
[ 1.683714] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.683729] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.683738] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.683754] ehci-pci 0000:00:13.2: debug port 1
[ 1.683808] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe266000
[ 1.694658] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.694834] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.694840] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.694846] usb usb4: Product: EHCI Host Controller
[ 1.694851] usb usb4: Manufacturer: Linux 3.19.0-47-generic ehci_hcd
[ 1.694856] usb usb4: SerialNumber: 0000:00:13.2
[ 1.695215] hub 4-0:1.0: USB hub found
[ 1.695237] hub 4-0:1.0: 4 ports detected
[ 1.695561] ehci-platform: EHCI generic platform driver
[ 1.695595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.695607] ohci-pci: OHCI PCI platform driver
[ 1.695819] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.695834] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.695898] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe269000
[ 1.754787] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.754796] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.754802] usb usb5: Product: OHCI PCI host controller
[ 1.754807] usb usb5: Manufacturer: Linux 3.19.0-47-generic ohci_hcd
[ 1.754812] usb usb5: SerialNumber: 0000:00:12.0
[ 1.755185] hub 5-0:1.0: USB hub found
[ 1.755208] hub 5-0:1.0: 4 ports detected
[ 1.755701] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.755716] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.755762] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe267000
[ 1.814809] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.814819] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.814825] usb usb6: Product: OHCI PCI host controller
[ 1.814830] usb usb6: Manufacturer: Linux 3.19.0-47-generic ohci_hcd
[ 1.814835] usb usb6: SerialNumber: 0000:00:13.0
[ 1.815232] hub 6-0:1.0: USB hub found
[ 1.815257] hub 6-0:1.0: 4 ports detected
[ 1.815584] ohci-platform: OHCI generic platform driver
[ 1.815622] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.815766] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.815770] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.816506] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.816778] mousedev: PS/2 mouse device common for all mice
[ 1.817130] rtc_cmos 00:05: RTC can wake from S4
[ 1.817310] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.817343] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.817363] i2c /dev entries driver
[ 1.817532] device-mapper: uevent: version 1.0.3
[ 1.817709] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.817753] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.818099] PCCT header not found.
[ 1.818103] ACPI PCC probe failed.
[ 1.818339] TCP: cubic registered
[ 1.818616] NET: Registered protocol family 10
[ 1.819112] NET: Registered protocol family 17
[ 1.819138] Key type dns_resolver registered
[ 1.819988] Loading compiled-in X.509 certificates
[ 1.822569] Loaded X.509 cert 'Magrathea: Glacier signing key: 8335c30cf45ac8874b83816192bf33dddcb532b6'
[ 1.822609] registered taskstats version 1
[ 1.827563] Key type trusted registered
[ 1.835953] Key type encrypted registered
[ 1.835972] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.835981] ima: No TPM chip found, activating TPM-bypass!
[ 1.836028] evm: HMAC attrs: 0x1
[ 1.836678] Magic number: 4:190:936
[ 1.836887] rtc_cmos 00:05: setting system clock to 2016-02-14 12:55:48 UTC (1455454548)
[ 1.837151] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.837541] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.837545] EDD information not available.
[ 1.837752] PM: Hibernation image not present or could not be loaded.
[ 1.838601] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 1.838607] Write protecting the kernel read-only data: 12288k
[ 1.839108] Freeing unused kernel memory: 256K (ffff8800017c0000 - ffff880001800000)
[ 1.839378] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[ 1.846900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.870656] systemd-udevd[123]: starting version 204
[ 1.925273] [drm] Initialized drm 1.1.0 20060810
[ 1.926652] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.927863] ahci 0000:00:11.0: version 3.0
[ 1.928129] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.928137] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.928914] scsi host0: ahci
[ 1.929189] scsi host1: ahci
[ 1.929330] ata1: SATA max UDMA/133 abar m1024@0xfe26a000 port 0xfe26a100 irq 32
[ 1.929337] ata2: SATA max UDMA/133 abar m1024@0xfe26a000 port 0xfe26a180 irq 32
[ 1.936092] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000016000, d0:50:99:59:4f:a7, XID 0c000800 IRQ 33
[ 1.936103] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.951276] wmi: Mapper loaded
[ 2.000545] checking generic (b0000000 500000) vs hw (c0000000 10000000)
[ 2.000554] checking generic (b0000000 500000) vs hw (d0000000 2000000)
[ 2.000648] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 2.001246] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280b1
[ 2.001253] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 2.001258] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 2.120091] nouveau [ VBIOS][0000:01:00.0] using image from PROM
[ 2.120402] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 2.120410] nouveau [ VBIOS][0000:01:00.0] version 70.18.49.00.00
[ 2.122336] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 2.122348] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 2.150679] usb 6-2: new low-speed USB device number 2 using ohci-pci
[ 2.171468] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 2.171540] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 2.171546] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 2.171550] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 2.173832] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 2.202101] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 2.202126] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 2.202134] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 2.222036] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[ 2.222047] nouveau [ CLK][0000:01:00.0] 0f: core 589 MHz shader 1402 MHz memory 500 MHz
[ 2.222089] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 2.222481] [TTM] Zone kernel: Available graphics memory: 3765194 kiB
[ 2.222485] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.222489] [TTM] Initializing pool allocator
[ 2.222501] [TTM] Initializing DMA pool allocator
[ 2.222527] nouveau [ DRM] VRAM: 1024 MiB
[ 2.222532] nouveau [ DRM] GART: 1048576 MiB
[ 2.222541] nouveau [ DRM] TMDS table version 2.0
[ 2.222546] nouveau [ DRM] DCB version 4.0
[ 2.222552] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 2.222558] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 2.222563] nouveau [ DRM] DCB outp 02: 02011362 00020010
[ 2.222568] nouveau [ DRM] DCB outp 03: 01022310 00000000
[ 2.222572] nouveau [ DRM] DCB conn 00: 00001030
[ 2.222578] nouveau [ DRM] DCB conn 01: 00002161
[ 2.222582] nouveau [ DRM] DCB conn 02: 00000200
[ 2.246514] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.246519] [drm] Driver supports precise vblank timestamp query.
[ 2.272867] nouveau [ DRM] MM: using COPY for buffer copies
[ 2.329972] usb 6-2: New USB device found, idVendor=1bcf, idProduct=0007
[ 2.329979] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.329985] usb 6-2: Product: USB Optical Mouse
[ 2.339982] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.350413] usbcore: registered new interface driver usbhid
[ 2.350417] usbhid: USB HID core driver
[ 2.354377] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/0003:1BCF:0007.0001/input/input3
[ 2.354837] hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:13.0-2/input0
[ 2.362640] nouveau [ DRM] allocated 1360x768 fb: 0x70000, bo ffff880036370c00
[ 2.362847] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 2.362853] nouveau 0000:01:00.0: registered panic notifier
[ 2.379056] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 2.418961] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.426970] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.427976] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33
[ 2.428118] ata2.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[ 2.428125] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.428891] ata2.00: configured for UDMA/133
[ 2.433081] ata1.00: configured for UDMA/33
[ 2.623053] tsc: Refined TSC clocksource calibration: 1300.000 MHz
[ 3.623747] Switched to clocksource tsc
[ 23.967420] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 23.967437] scsi 0:0:0:0: CDB:
[ 23.967441] Inquiry: 12 00 00 00 60 00
[ 23.967461] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
[ 23.967461] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 23.967468] ata1.00: status: { DRDY }
[ 23.967478] ata1: hard resetting link
[ 24.459590] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 24.473536] ata1.00: configured for UDMA/33
[ 24.474740] ata1: EH complete
[ 24.474777] scsi 0:0:0:0: scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[ 24.478036] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0015 PQ: 0 ANSI: 5
[ 29.485531] ata1.00: qc timeout (cmd 0xa0)
[ 29.485553] ata1: limiting SATA link speed to 1.5 Gbps
[ 29.485561] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 29.485567] ata1.00: irq_stat 0x40000001
[ 29.485577] scsi 0:0:0:0: CDB:
[ 29.485581] Inquiry: 12 01 00 00 ff 00
[ 29.485601] ata1.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 4 dma 16640 in
[ 29.485601] res 51/54:03:00:00:01/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 29.485608] ata1.00: status: { DRDY ERR }
[ 29.485617] ata1: hard resetting link
[ 29.977718] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 29.991740] ata1.00: configured for UDMA/33
[ 29.992861] ata1: EH complete
[ 35.003687] ata1.00: qc timeout (cmd 0xa0)
[ 35.003711] ata1.00: limiting speed to UDMA/25:PIO4
[ 35.003719] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 35.003725] ata1.00: irq_stat 0x40000001
[ 35.003734] sr 0:0:0:0: CDB:
[ 35.003739] Test Unit Ready: 00 00 00 00 00 00
[ 35.003758] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 5
[ 35.003758] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 35.003764] ata1.00: status: { DRDY ERR }
[ 35.003774] ata1: hard resetting link
[ 35.495869] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 35.509220] ata1.00: configured for UDMA/25
[ 35.510254] ata1: EH complete
[ 40.517825] ata1.00: qc timeout (cmd 0xa0)
[ 40.517848] ata1.00: limiting speed to PIO4
[ 40.517856] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 40.517862] ata1.00: irq_stat 0x40000001
[ 40.517872] sr 0:0:0:0: CDB:
[ 40.517876] Test Unit Ready: 00 00 00 00 00 00
[ 40.517895] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 6
[ 40.517895] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 40.517902] ata1.00: status: { DRDY ERR }
[ 40.517913] ata1: hard resetting link
[ 41.009874] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 41.023857] ata1.00: configured for PIO4
[ 41.025068] ata1: EH complete
[ 46.035912] ata1.00: qc timeout (cmd 0xa0)
[ 46.035937] ata1.00: limiting speed to PIO3
[ 46.035945] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 46.035951] ata1.00: irq_stat 0x40000001
[ 46.035961] sr 0:0:0:0: CDB:
[ 46.035965] Test Unit Ready: 00 00 00 00 00 00
[ 46.035984] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 7
[ 46.035984] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 46.035991] ata1.00: status: { DRDY ERR }
[ 46.036001] ata1: hard resetting link
[ 46.528189] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 46.542186] ata1.00: configured for PIO3
[ 46.543582] ata1: EH complete
[ 46.546905] sr 0:0:0:0: [sr0] scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
[ 46.546915] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 46.547315] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 46.547481] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 46.547805] scsi 1:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
[ 46.548277] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 46.548286] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 46.548423] sd 1:0:0:0: [sda] Write Protect is off
[ 46.548430] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 46.548490] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 46.548880] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 46.655642] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 46.656933] sd 1:0:0:0: [sda] Attached SCSI disk
[ 51.566062] ata1.00: qc timeout (cmd 0xa0)
[ 51.566086] ata1.00: limiting speed to PIO0
[ 51.566094] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 51.566100] ata1.00: irq_stat 0x40000001
[ 51.566109] sr 0:0:0:0: CDB:
[ 51.566113] Test Unit Ready: 00 00 00 00 00 00
[ 51.566133] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 12
[ 51.566133] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 51.566140] ata1.00: status: { DRDY ERR }
[ 51.566149] ata1: hard resetting link
[ 52.058341] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 52.071564] ata1.00: configured for PIO0
[ 52.072767] ata1: EH complete
[ 52.218063] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 52.218073] EXT4-fs (sda3): write access will be enabled during recovery
[ 52.284417] random: nonblocking pool is initialized
[ 53.662563] EXT4-fs (sda3): recovery complete
[ 53.670021] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 57.080282] ata1.00: qc timeout (cmd 0xa0)
[ 57.080306] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 57.080312] ata1.00: irq_stat 0x40000001
[ 57.080322] sr 0:0:0:0: CDB:
[ 57.080326] Test Unit Ready: 00 00 00 00 00 00
[ 57.080346] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 13
[ 57.080346] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 57.080353] ata1.00: status: { DRDY ERR }
[ 57.080362] ata1: hard resetting link
[ 57.572491] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 57.585840] ata1.00: configured for PIO0
[ 57.586785] ata1: EH complete
[ 62.594445] ata1.00: qc timeout (cmd 0xa0)
[ 62.594470] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 62.594476] ata1.00: irq_stat 0x40000001
[ 62.594486] sr 0:0:0:0: CDB:
[ 62.594490] Test Unit Ready: 00 00 00 00 00 00
[ 62.594509] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 14
[ 62.594509] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 62.594516] ata1.00: status: { DRDY ERR }
[ 62.594525] ata1: hard resetting link
[ 63.086492] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 63.100555] ata1.00: configured for PIO0
[ 63.101714] ata1: EH complete
[ 68.112440] ata1.00: qc timeout (cmd 0xa0)
[ 68.112465] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 68.112471] ata1.00: irq_stat 0x40000001
[ 68.112482] sr 0:0:0:0: CDB:
[ 68.112486] Test Unit Ready: 00 00 00 00 00 00
[ 68.112505] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 15
[ 68.112505] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 68.112512] ata1.00: status: { DRDY ERR }
[ 68.112521] ata1: hard resetting link
[ 68.604806] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 68.618198] ata1.00: configured for PIO0
[ 68.619517] ata1: EH complete
[ 73.626744] ata1.00: qc timeout (cmd 0xa0)
[ 73.626770] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 73.626776] ata1.00: irq_stat 0x40000001
[ 73.626786] sr 0:0:0:0: CDB:
[ 73.626790] Test Unit Ready: 00 00 00 00 00 00
[ 73.626809] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 16
[ 73.626809] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 73.626816] ata1.00: status: { DRDY ERR }
[ 73.626825] ata1: hard resetting link
[ 74.118956] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 74.132625] ata1.00: configured for PIO0
[ 74.133623] ata1: EH complete
[ 79.144914] ata1.00: qc timeout (cmd 0xa0)
[ 79.144941] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 79.144947] ata1.00: irq_stat 0x40000001
[ 79.144957] sr 0:0:0:0: CDB:
[ 79.144961] Test Unit Ready: 00 00 00 00 00 00
[ 79.144980] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 17
[ 79.144980] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 79.144987] ata1.00: status: { DRDY ERR }
[ 79.144996] ata1: hard resetting link
[ 79.636958] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 79.651001] ata1.00: configured for PIO0
[ 79.652629] ata1: EH complete
[ 84.667062] ata1.00: qc timeout (cmd 0xa0)
[ 84.667089] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 84.667096] ata1.00: irq_stat 0x40000001
[ 84.667106] sr 0:0:0:0: CDB:
[ 84.667110] Test Unit Ready: 00 00 00 00 00 00
[ 84.667129] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 20
[ 84.667129] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 84.667136] ata1.00: status: { DRDY ERR }
[ 84.667145] ata1: hard resetting link
[ 85.159265] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 85.172481] ata1.00: configured for PIO0
[ 85.173668] ata1: EH complete
[ 90.181078] ata1.00: qc timeout (cmd 0xa0)
[ 90.181104] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 90.181110] ata1.00: irq_stat 0x40000001
[ 90.181121] sr 0:0:0:0: CDB:
[ 90.181125] Test Unit Ready: 00 00 00 00 00 00
[ 90.181144] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 21
[ 90.181144] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 90.181151] ata1.00: status: { DRDY ERR }
[ 90.181160] ata1: hard resetting link
[ 90.673344] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 90.687432] ata1.00: configured for PIO0
[ 90.688598] ata1: EH complete
[ 91.905204] init: bootchart main process (363) terminated with status 127
[ 91.960183] systemd-udevd[388]: starting version 204
[ 92.083955] init: bootchart post-stop process (382) terminated with status 127
[ 92.198361] lp: driver loaded but no devices found
[ 92.222966] ppdev: user-space parallel port driver
[ 92.251346] parport_pc 00:03: reported by Plug and Play ACPI
[ 92.251386] parport0: PC-style at 0x378, irq 5 [PCSPP,EPP]
[ 92.302857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 92.350175] lp0: using parport0 (interrupt-driven).
[ 92.388091] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 92.388401] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 92.405119] MCE: In-kernel MCE decoding enabled.
[ 92.491378] EDAC MC: Ver: 3.0.0
[ 92.543119] audit: type=1400 audit(1455454639.168:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=607 comm="apparmor_parser"
[ 92.543138] audit: type=1400 audit(1455454639.168:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607 comm="apparmor_parser"
[ 92.543151] audit: type=1400 audit(1455454639.168:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
[ 92.544199] audit: type=1400 audit(1455454639.168:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607 comm="apparmor_parser"
[ 92.544218] audit: type=1400 audit(1455454639.168:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
[ 92.544774] audit: type=1400 audit(1455454639.168:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
[ 92.551272] audit: type=1400 audit(1455454639.176:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=713 comm="apparmor_parser"
[ 92.569795] AMD64 EDAC driver v3.4.0
[ 92.569870] EDAC amd64: DRAM ECC disabled.
[ 92.569883] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 92.569883] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 92.569883] (Note that use of the override may cause unknown side effects.)
[ 92.729876] [drm] radeon kernel modesetting enabled.
[ 92.758158] AVX version of gcm_enc/dec engaged.
[ 92.758167] AES CTR mode by8 optimization enabled
[ 92.874850] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 92.874858] AMD IOMMUv2 functionality not available on this system
[ 92.970742] Found CRAT image with size=936
[ 92.970752] Parsing CRAT table with 1 nodes
[ 92.970757] Found CU entry in CRAT table with proximity_domain=0 caps=0
[ 92.970761] CU CPU: cores=4 id_base=0
[ 92.970765] Found memory entry in CRAT table with proximity_domain=0
[ 92.970769] Found memory entry in CRAT table with proximity_domain=0
[ 92.970772] Found cache entry in CRAT table with processor_id=0
[ 92.970776] Found cache entry in CRAT table with processor_id=0
[ 92.970779] Found cache entry in CRAT table with processor_id=0
[ 92.970782] Found cache entry in CRAT table with processor_id=1
[ 92.970785] Found cache entry in CRAT table with processor_id=1
[ 92.970788] Found cache entry in CRAT table with processor_id=1
[ 92.970790] Found cache entry in CRAT table with processor_id=2
[ 92.970793] Found cache entry in CRAT table with processor_id=2
[ 92.970796] Found cache entry in CRAT table with processor_id=2
[ 92.970798] Found cache entry in CRAT table with processor_id=3
[ 92.970801] Found cache entry in CRAT table with processor_id=3
[ 92.970803] Found cache entry in CRAT table with processor_id=3
[ 92.970806] Creating topology SYSFS entries
[ 92.970866] Finished initializing topology ret=0
[ 92.972288] kfd kfd: Initialized module
[ 92.974228] checking generic (b0000000 500000) vs hw (b0000000 10000000)
[ 92.974235] fb: switching to radeondrmfb from VESA VGA
[ 92.974315] Console: switching to colour dummy device 80x25
[ 92.996484] [drm] initializing kernel modesetting (KABINI 0x1002:0x9836 0x1849:0x9836).
[ 92.996519] [drm] register mmio base: 0xFE200000
[ 92.996523] [drm] register mmio size: 262144
[ 92.996538] [drm] doorbell mmio base: 0xD2000000
[ 92.996542] [drm] doorbell mmio size: 8388608
[ 92.996618] ATOM BIOS: AMD
[ 92.996705] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 92.996712] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 92.996717] [drm] Detected VRAM RAM=512M, BAR=256M
[ 92.996720] [drm] RAM width 128bits DDR
[ 92.996749] [drm] radeon: 512M of VRAM memory ready
[ 92.996753] [drm] radeon: 1024M of GTT memory ready.
[ 92.996787] [drm] Loading kabini Microcode
[ 93.075042] kvm: Nested Virtualization enabled
[ 93.075054] kvm: Nested Paging enabled
[ 93.200362] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 93.337958] [drm] Internal thermal controller without fan control
[ 93.339474] [drm] radeon: dpm initialized
[ 93.398296] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 93.398353] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 93.413224] [drm] PCIE GART of 1024M enabled (table at 0x000000000078C000).
[ 93.413473] radeon 0000:00:01.0: WB enabled
[ 93.413500] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880241fbec00
[ 93.413508] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff880241fbec04
[ 93.413514] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff880241fbec08
[ 93.413520] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880241fbec0c
[ 93.413526] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff880241fbec10
[ 93.414469] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900131b6c98
[ 93.414577] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff880241fbec18
[ 93.414583] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff880241fbec1c
[ 93.414589] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 93.414592] [drm] Driver supports precise vblank timestamp query.
[ 93.414651] radeon 0000:00:01.0: radeon: using MSI.
[ 93.414696] [drm] radeon: irq initialized.
[ 93.419553] [drm] ring test on 0 succeeded in 3 usecs
[ 93.419656] [drm] ring test on 1 succeeded in 2 usecs
[ 93.419682] [drm] ring test on 2 succeeded in 2 usecs
[ 93.419948] [drm] ring test on 3 succeeded in 4 usecs
[ 93.419958] [drm] ring test on 4 succeeded in 3 usecs
[ 93.465702] [drm] ring test on 5 succeeded in 1 usecs
[ 93.485596] [drm] UVD initialized successfully.
[ 93.594923] [drm] ring test on 6 succeeded in 16 usecs
[ 93.594942] [drm] ring test on 7 succeeded in 3 usecs
[ 93.594945] [drm] VCE initialized successfully.
[ 93.599195] [drm] ib test on ring 0 succeeded in 0 usecs
[ 94.098804] [drm] ib test on ring 1 succeeded in 0 usecs
[ 94.598987] [drm] ib test on ring 2 succeeded in 0 usecs
[ 94.599121] [drm] ib test on ring 3 succeeded in 0 usecs
[ 94.599187] [drm] ib test on ring 4 succeeded in 0 usecs
[ 95.119184] [drm] ib test on ring 5 succeeded
[ 95.139826] [drm] ib test on ring 6 succeeded
[ 95.140448] [drm] ib test on ring 7 succeeded
[ 95.142404] [drm] Radeon Display Connectors
[ 95.142409] [drm] Connector 0:
[ 95.142412] [drm] DP-1
[ 95.142415] [drm] HPD1
[ 95.142421] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 95.142424] [drm] Encoders:
[ 95.142427] [drm] DFP1: INTERNAL_UNIPHY
[ 95.142430] [drm] Connector 1:
[ 95.142432] [drm] HDMI-A-2
[ 95.142435] [drm] HPD2
[ 95.142439] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 95.142442] [drm] Encoders:
[ 95.142444] [drm] DFP2: INTERNAL_UNIPHY
[ 95.142447] [drm] Connector 2:
[ 95.142450] [drm] VGA-2
[ 95.142454] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 95.142456] [drm] Encoders:
[ 95.142459] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 95.192034] [drm] fb mappable at 0xB0990000
[ 95.192041] [drm] vram apper at 0xB0000000
[ 95.192044] [drm] size 5242880
[ 95.192047] [drm] fb depth is 24
[ 95.192050] [drm] pitch is 5120
[ 95.192247] fbcon: radeondrmfb (fb0) is primary device
[ 95.192416] Console: switching to colour frame buffer device 160x64
[ 95.192433] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 95.199692] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 1
[ 95.200105] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 95.200122] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 95.256460] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 95.256472] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 95.256478] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 95.256483] sound hdaudioC0D0: mono: mono_out=0x0
[ 95.256487] sound hdaudioC0D0: inputs:
[ 95.256494] sound hdaudioC0D0: Front Mic=0x19
[ 95.256499] sound hdaudioC0D0: Rear Mic=0x18
[ 95.256504] sound hdaudioC0D0: Line=0x1a
[ 95.268447] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 95.268658] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 95.268839] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 95.699337] ata1.00: qc timeout (cmd 0xa0)
[ 95.699365] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 95.699370] ata1.00: irq_stat 0x40000001
[ 95.699381] sr 0:0:0:0: CDB:
[ 95.699388] Test Unit Ready: 00 00 00 00 00 00
[ 95.699408] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 22
[ 95.699408] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 95.699414] ata1.00: status: { DRDY ERR }
[ 95.699423] ata1: hard resetting link
[ 96.012036] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input7
[ 96.015326] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input8
[ 96.015574] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input9
[ 96.015782] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card1/input10
[ 96.191557] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 96.204912] ata1.00: configured for PIO0
[ 96.205960] ata1: EH complete
[ 101.217377] ata1.00: qc timeout (cmd 0xa0)
[ 101.217402] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 101.217409] ata1.00: irq_stat 0x40000001
[ 101.217420] sr 0:0:0:0: CDB:
[ 101.217424] Test Unit Ready: 00 00 00 00 00 00
[ 101.217443] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 24
[ 101.217443] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 101.217450] ata1.00: status: { DRDY ERR }
[ 101.217459] ata1: hard resetting link
[ 101.709700] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 101.723768] ata1.00: configured for PIO0
[ 101.724916] ata1: EH complete
[ 106.735668] ata1.00: qc timeout (cmd 0xa0)
[ 106.735695] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 106.735701] ata1.00: irq_stat 0x40000001
[ 106.735711] sr 0:0:0:0: CDB:
[ 106.735715] Test Unit Ready: 00 00 00 00 00 00
[ 106.735735] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 25
[ 106.735735] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 106.735742] ata1.00: status: { DRDY ERR }
[ 106.735750] ata1: hard resetting link
[ 107.227850] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 107.241836] ata1.00: configured for PIO0
[ 107.243022] ata1: EH complete
[ 112.253832] ata1.00: qc timeout (cmd 0xa0)
[ 112.253860] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 112.253866] ata1.00: irq_stat 0x40000001
[ 112.253877] sr 0:0:0:0: CDB:
[ 112.253881] Test Unit Ready: 00 00 00 00 00 00
[ 112.253901] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 26
[ 112.253901] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 112.253908] ata1.00: status: { DRDY ERR }
[ 112.253917] ata1: hard resetting link
[ 112.746012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 112.759270] ata1.00: configured for PIO0
[ 112.760518] ata1: EH complete
[ 117.767978] ata1.00: qc timeout (cmd 0xa0)
[ 117.768005] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 117.768011] ata1.00: irq_stat 0x40000001
[ 117.768022] sr 0:0:0:0: CDB:
[ 117.768026] Test Unit Ready: 00 00 00 00 00 00
[ 117.768046] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 27
[ 117.768046] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 117.768053] ata1.00: status: { DRDY ERR }
[ 117.768062] ata1: hard resetting link
[ 118.260179] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 118.274086] ata1.00: configured for PIO0
[ 118.275311] ata1: EH complete
[ 123.286119] ata1.00: qc timeout (cmd 0xa0)
[ 123.286145] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 123.286151] ata1.00: irq_stat 0x40000001
[ 123.286162] sr 0:0:0:0: CDB:
[ 123.286166] Test Unit Ready: 00 00 00 00 00 00
[ 123.286186] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 28
[ 123.286186] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 123.286193] ata1.00: status: { DRDY ERR }
[ 123.286201] ata1: hard resetting link
[ 123.778313] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 123.791619] ata1.00: configured for PIO0
[ 123.792705] ata1: EH complete
[ 128.800278] ata1.00: qc timeout (cmd 0xa0)
[ 128.800305] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 128.800311] ata1.00: irq_stat 0x40000001
[ 128.800322] sr 0:0:0:0: CDB:
[ 128.800326] Test Unit Ready: 00 00 00 00 00 00
[ 128.800345] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 29
[ 128.800345] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 128.800352] ata1.00: status: { DRDY ERR }
[ 128.800361] ata1: hard resetting link
[ 129.292463] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 129.306452] ata1.00: configured for PIO0
[ 129.307614] ata1: EH complete
[ 134.318412] ata1.00: qc timeout (cmd 0xa0)
[ 134.318439] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 134.318445] ata1.00: irq_stat 0x40000001
[ 134.318455] sr 0:0:0:0: CDB:
[ 134.318459] Test Unit Ready: 00 00 00 00 00 00
[ 134.318478] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 134.318478] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 134.318485] ata1.00: status: { DRDY ERR }
[ 134.318495] ata1: hard resetting link
[ 134.810510] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 134.823900] ata1.00: configured for PIO0
[ 134.824945] ata1: EH complete
[ 139.832579] ata1.00: qc timeout (cmd 0xa0)
[ 139.832609] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 139.832615] ata1.00: irq_stat 0x40000001
[ 139.832625] sr 0:0:0:0: CDB:
[ 139.832629] Test Unit Ready: 00 00 00 00 00 00
[ 139.832649] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 1
[ 139.832649] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 139.832656] ata1.00: status: { DRDY ERR }
[ 139.832666] ata1: hard resetting link
[ 140.324770] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 140.338720] ata1.00: configured for PIO0
[ 140.339909] ata1: EH complete
[ 145.350769] ata1.00: qc timeout (cmd 0xa0)
[ 145.350798] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 145.350804] ata1.00: irq_stat 0x40000001
[ 145.350814] sr 0:0:0:0: CDB:
[ 145.350818] Test Unit Ready: 00 00 00 00 00 00
[ 145.350837] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 2
[ 145.350837] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 145.350844] ata1.00: status: { DRDY ERR }
[ 145.350854] ata1: hard resetting link
[ 145.842932] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 145.856292] ata1.00: configured for PIO0
[ 145.857342] ata1: EH complete
[ 150.864891] ata1.00: qc timeout (cmd 0xa0)
[ 150.864919] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 150.864925] ata1.00: irq_stat 0x40000001
[ 150.864934] sr 0:0:0:0: CDB:
[ 150.864938] Test Unit Ready: 00 00 00 00 00 00
[ 150.864957] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 3
[ 150.864957] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 150.864964] ata1.00: status: { DRDY ERR }
[ 150.864974] ata1: hard resetting link
[ 151.356955] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 151.370903] ata1.00: configured for PIO0
[ 151.372088] ata1: EH complete
[ 154.267742] systemd-udevd[407]: timeout 'cdrom_id --lock-media /dev/sr0'
[ 156.383050] ata1.00: qc timeout (cmd 0xa0)
[ 156.383082] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 156.383088] ata1.00: irq_stat 0x40000001
[ 156.383098] sr 0:0:0:0: CDB:
[ 156.383102] Test Unit Ready: 00 00 00 00 00 00
[ 156.383121] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 4
[ 156.383121] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 156.383128] ata1.00: status: { DRDY ERR }
[ 156.383138] ata1: hard resetting link
[ 156.875242] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 156.888983] ata1.00: configured for PIO0
[ 156.890028] ata1: EH complete
[ 161.901199] ata1.00: qc timeout (cmd 0xa0)
[ 161.901226] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 161.901232] ata1.00: irq_stat 0x40000001
[ 161.901242] sr 0:0:0:0: CDB:
[ 161.901247] Test Unit Ready: 00 00 00 00 00 00
[ 161.901266] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 5
[ 161.901266] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 161.901273] ata1.00: status: { DRDY ERR }
[ 161.901283] ata1: hard resetting link
[ 162.393403] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 162.407564] ata1.00: configured for PIO0
[ 162.409092] ata1: EH complete
[ 167.419356] ata1.00: qc timeout (cmd 0xa0)
[ 167.419383] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 167.419389] ata1.00: irq_stat 0x40000001
[ 167.419399] sr 0:0:0:0: CDB:
[ 167.419403] Test Unit Ready: 00 00 00 00 00 00
[ 167.419422] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 6
[ 167.419422] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 167.419429] ata1.00: status: { DRDY ERR }
[ 167.419439] ata1: hard resetting link
[ 167.911552] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 167.925464] ata1.00: configured for PIO0
[ 167.926830] ata1: EH complete
[ 172.937377] ata1.00: qc timeout (cmd 0xa0)
[ 172.937405] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 172.937411] ata1.00: irq_stat 0x40000001
[ 172.937421] sr 0:0:0:0: CDB:
[ 172.937425] Test Unit Ready: 00 00 00 00 00 00
[ 172.937444] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 7
[ 172.937444] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 172.937451] ata1.00: status: { DRDY ERR }
[ 172.937461] ata1: hard resetting link
[ 173.429710] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 173.443041] ata1.00: configured for PIO0
[ 173.444152] ata1: EH complete
[ 178.451556] ata1.00: qc timeout (cmd 0xa0)
[ 178.451583] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 178.451589] ata1.00: irq_stat 0x40000001
[ 178.451599] sr 0:0:0:0: CDB:
[ 178.451604] Test Unit Ready: 00 00 00 00 00 00
[ 178.451623] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 8
[ 178.451623] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 178.451630] ata1.00: status: { DRDY ERR }
[ 178.451639] ata1: hard resetting link
[ 178.943856] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 178.957316] ata1.00: configured for PIO0
[ 178.958315] ata1: EH complete
[ 183.969693] ata1.00: qc timeout (cmd 0xa0)
[ 183.969721] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 183.969727] ata1.00: irq_stat 0x40000001
[ 183.969737] sr 0:0:0:0: CDB:
[ 183.969741] Test Unit Ready: 00 00 00 00 00 00
[ 183.969761] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 10
[ 183.969761] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 183.969768] ata1.00: status: { DRDY ERR }
[ 183.969777] ata1: hard resetting link
[ 184.462013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 184.475244] ata1.00: configured for PIO0
[ 184.476475] ata1: EH complete
[ 189.483977] ata1.00: qc timeout (cmd 0xa0)
[ 189.484004] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 189.484011] ata1.00: irq_stat 0x40000001
[ 189.484021] sr 0:0:0:0: CDB:
[ 189.484025] Test Unit Ready: 00 00 00 00 00 00
[ 189.484044] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 11
[ 189.484044] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 189.484051] ata1.00: status: { DRDY ERR }
[ 189.484061] ata1: hard resetting link
[ 189.976042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 189.990031] ata1.00: configured for PIO0
[ 189.991087] ata1: EH complete
[ 195.001990] ata1.00: qc timeout (cmd 0xa0)
[ 195.002018] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 195.002024] ata1.00: irq_stat 0x40000001
[ 195.002033] sr 0:0:0:0: CDB:
[ 195.002037] Test Unit Ready: 00 00 00 00 00 00
[ 195.002057] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 12
[ 195.002057] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 195.002064] ata1.00: status: { DRDY ERR }
[ 195.002073] ata1: hard resetting link
[ 195.494321] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 195.507604] ata1.00: configured for PIO0
[ 195.508712] ata1: EH complete
[ 200.524286] ata1.00: qc timeout (cmd 0xa0)
[ 200.524313] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 200.524319] ata1.00: irq_stat 0x40000001
[ 200.524330] sr 0:0:0:0: CDB:
[ 200.524334] Test Unit Ready: 00 00 00 00 00 00
[ 200.524354] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 15
[ 200.524354] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 200.524361] ata1.00: status: { DRDY ERR }
[ 200.524370] ata1: hard resetting link
[ 201.016485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 201.030287] ata1.00: configured for PIO0
[ 201.031747] ata1: EH complete
[ 206.042458] ata1.00: qc timeout (cmd 0xa0)
[ 206.042487] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 206.042493] ata1.00: irq_stat 0x40000001
[ 206.042502] sr 0:0:0:0: CDB:
[ 206.042506] Test Unit Ready: 00 00 00 00 00 00
[ 206.042526] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 16
[ 206.042526] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 206.042533] ata1.00: status: { DRDY ERR }
[ 206.042542] ata1: hard resetting link
[ 206.534625] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 206.548611] ata1.00: configured for PIO0
[ 206.549799] ata1: EH complete
[ 211.560458] ata1.00: qc timeout (cmd 0xa0)
[ 211.560485] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 211.560491] ata1.00: irq_stat 0x40000001
[ 211.560501] sr 0:0:0:0: CDB:
[ 211.560505] Test Unit Ready: 00 00 00 00 00 00
[ 211.560525] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 17
[ 211.560525] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 211.560532] ata1.00: status: { DRDY ERR }
[ 211.560541] ata1: hard resetting link
[ 212.052784] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 212.066051] ata1.00: configured for PIO0
[ 212.067218] ata1: EH complete
[ 217.074741] ata1.00: qc timeout (cmd 0xa0)
[ 217.074769] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 217.074775] ata1.00: irq_stat 0x40000001
[ 217.074785] sr 0:0:0:0: CDB:
[ 217.074790] Test Unit Ready: 00 00 00 00 00 00
[ 217.074809] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 18
[ 217.074809] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 217.074816] ata1.00: status: { DRDY ERR }
[ 217.074825] ata1: hard resetting link
[ 217.566935] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 217.580827] ata1.00: configured for PIO0
[ 217.582202] ata1: EH complete
[ 222.592769] ata1.00: qc timeout (cmd 0xa0)
[ 222.592797] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 222.592803] ata1.00: irq_stat 0x40000001
[ 222.592813] sr 0:0:0:0: CDB:
[ 222.592817] Test Unit Ready: 00 00 00 00 00 00
[ 222.592836] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 19
[ 222.592836] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 222.592843] ata1.00: status: { DRDY ERR }
[ 222.592852] ata1: hard resetting link
[ 223.085088] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 223.099160] ata1.00: configured for PIO0
[ 223.100308] ata1: EH complete
[ 228.111050] ata1.00: qc timeout (cmd 0xa0)
[ 228.111078] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 228.111084] ata1.00: irq_stat 0x40000001
[ 228.111095] sr 0:0:0:0: CDB:
[ 228.111099] Test Unit Ready: 00 00 00 00 00 00
[ 228.111118] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 20
[ 228.111118] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 228.111125] ata1.00: status: { DRDY ERR }
[ 228.111134] ata1: hard resetting link
[ 228.603122] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 228.617081] ata1.00: configured for PIO0
[ 228.618423] ata1: EH complete
[ 233.629200] ata1.00: qc timeout (cmd 0xa0)
[ 233.629228] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 233.629234] ata1.00: irq_stat 0x40000001
[ 233.629245] sr 0:0:0:0: CDB:
[ 233.629249] Test Unit Ready: 00 00 00 00 00 00
[ 233.629268] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 21
[ 233.629268] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 233.629275] ata1.00: status: { DRDY ERR }
[ 233.629284] ata1: hard resetting link
[ 234.121401] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 234.134688] ata1.00: configured for PIO0
[ 234.135635] ata1: EH complete
[ 239.143369] ata1.00: qc timeout (cmd 0xa0)
[ 239.143397] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 239.143403] ata1.00: irq_stat 0x40000001
[ 239.143413] sr 0:0:0:0: CDB:
[ 239.143417] Test Unit Ready: 00 00 00 00 00 00
[ 239.143436] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 22
[ 239.143436] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 239.143443] ata1.00: status: { DRDY ERR }
[ 239.143453] ata1: hard resetting link
[ 239.635418] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 239.649604] ata1.00: configured for PIO0
[ 239.650905] ata1: EH complete
[ 240.367843] INFO: task cdrom_id:435 blocked for more than 120 seconds.
[ 240.367854] Not tainted 3.19.0-47-generic #53~14.04.1-Ubuntu
[ 240.367857] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.367862] cdrom_id D ffff880083297aa8 0 435 1 0x00000004
[ 240.367871] ffff880083297aa8 ffff880241ab89d0 0000000000013e80 ffff880083297fd8
[ 240.367878] 0000000000013e80 ffffffff81c1d4e0 ffff880241ab89d0 ffff880083297ad8
[ 240.367884] ffff880088444018 ffff88008844401c ffff880241ab89d0 00000000ffffffff
[ 240.367890] Call Trace:
[ 240.367906] [<ffffffff817b3879>] schedule_preempt_disabled+0x29/0x70
[ 240.367913] [<ffffffff817b5565>] __mutex_lock_slowpath+0x95/0x100
[ 240.367920] [<ffffffff817b55f3>] ? mutex_lock+0x23/0x37
[ 240.367926] [<ffffffff817b55f3>] mutex_lock+0x23/0x37
[ 240.367934] [<ffffffff81224e23>] __blkdev_get+0x63/0x4b0
[ 240.367940] [<ffffffff8122548f>] blkdev_get+0x21f/0x340
[ 240.367946] [<ffffffff8122566f>] blkdev_open+0x5f/0x90
[ 240.367955] [<ffffffff811e9b07>] do_dentry_open+0x1f7/0x340
[ 240.367961] [<ffffffff81225610>] ? blkdev_get_by_dev+0x60/0x60
[ 240.367967] [<ffffffff811eb357>] vfs_open+0x57/0x60
[ 240.367974] [<ffffffff811fb26c>] do_last+0x4ec/0x1190
[ 240.367981] [<ffffffff811fbf90>] path_openat+0x80/0x600
[ 240.367988] [<ffffffff811a1b9c>] ? tlb_finish_mmu+0x1c/0x50
[ 240.367995] [<ffffffff811fd6aa>] do_filp_open+0x3a/0x90
[ 240.368002] [<ffffffff8120a297>] ? __alloc_fd+0xa7/0x130
[ 240.368008] [<ffffffff811eb6d9>] do_sys_open+0x129/0x280
[ 240.368014] [<ffffffff811eb84e>] SyS_open+0x1e/0x20
[ 240.368021] [<ffffffff817b770d>] system_call_fastpath+0x16/0x1b
[ 244.661505] ata1.00: qc timeout (cmd 0xa0)
[ 244.661533] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 244.661539] ata1.00: irq_stat 0x40000001
[ 244.661549] sr 0:0:0:0: CDB:
[ 244.661553] Test Unit Ready: 00 00 00 00 00 00
[ 244.661573] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 23
[ 244.661573] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 244.661580] ata1.00: status: { DRDY ERR }
[ 244.661589] ata1: hard resetting link
[ 245.153708] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 245.167223] ata1.00: configured for PIO0
[ 245.168661] ata1: EH complete
[ 250.179668] ata1.00: qc timeout (cmd 0xa0)
[ 250.179695] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 250.179701] ata1.00: irq_stat 0x40000001
[ 250.179712] sr 0:0:0:0: CDB:
[ 250.179716] Test Unit Ready: 00 00 00 00 00 00
[ 250.179735] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 25
[ 250.179735] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 250.179742] ata1.00: status: { DRDY ERR }
[ 250.179751] ata1: hard resetting link
[ 250.671863] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 250.685795] ata1.00: configured for PIO0
[ 250.687017] ata1: EH complete
[ 255.697822] ata1.00: qc timeout (cmd 0xa0)
[ 255.697849] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 255.697855] ata1.00: irq_stat 0x40000001
[ 255.697866] sr 0:0:0:0: CDB:
[ 255.697871] Test Unit Ready: 00 00 00 00 00 00
[ 255.697891] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 26
[ 255.697891] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 255.697898] ata1.00: status: { DRDY ERR }
[ 255.697907] ata1: hard resetting link
[ 256.190018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 256.204007] ata1.00: configured for PIO0
[ 256.205171] ata1: EH complete
[ 261.215859] ata1.00: qc timeout (cmd 0xa0)
[ 261.215886] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 261.215892] ata1.00: irq_stat 0x40000001
[ 261.215903] sr 0:0:0:0: CDB:
[ 261.215907] Test Unit Ready: 00 00 00 00 00 00
[ 261.215926] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 27
[ 261.215926] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 261.215933] ata1.00: status: { DRDY ERR }
[ 261.215942] ata1: hard resetting link
[ 261.708174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 261.721446] ata1.00: configured for PIO0
[ 261.722633] ata1: EH complete
[ 266.738016] ata1.00: qc timeout (cmd 0xa0)
[ 266.738043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 266.738049] ata1.00: irq_stat 0x40000001
[ 266.738060] sr 0:0:0:0: CDB:
[ 266.738064] Test Unit Ready: 00 00 00 00 00 00
[ 266.738084] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 30
[ 266.738084] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 266.738091] ata1.00: status: { DRDY ERR }
[ 266.738099] ata1: hard resetting link
[ 267.230310] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 267.244145] ata1.00: configured for PIO0
[ 267.245570] ata1: EH complete
[ 272.256276] ata1.00: qc timeout (cmd 0xa0)
[ 272.256303] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 272.256310] ata1.00: irq_stat 0x40000001
[ 272.256319] sr 0:0:0:0: CDB:
[ 272.256323] Test Unit Ready: 00 00 00 00 00 00
[ 272.256343] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 272.256343] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 272.256349] ata1.00: status: { DRDY ERR }
[ 272.256359] ata1: hard resetting link
[ 272.748483] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 272.762435] ata1.00: configured for PIO0
[ 272.763617] ata1: EH complete
[ 277.774443] ata1.00: qc timeout (cmd 0xa0)
[ 277.774471] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 277.774478] ata1.00: irq_stat 0x40000001
[ 277.774487] sr 0:0:0:0: CDB:
[ 277.774491] Test Unit Ready: 00 00 00 00 00 00
[ 277.774510] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 1
[ 277.774510] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 277.774517] ata1.00: status: { DRDY ERR }
[ 277.774527] ata1: hard resetting link
[ 278.266646] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 278.280724] ata1.00: configured for PIO0
[ 278.281876] ata1: EH complete
[ 283.292596] ata1.00: qc timeout (cmd 0xa0)
[ 283.292624] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 283.292630] ata1.00: irq_stat 0x40000001
[ 283.292640] sr 0:0:0:0: CDB:
[ 283.292644] Test Unit Ready: 00 00 00 00 00 00
[ 283.292663] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 2
[ 283.292663] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 283.292670] ata1.00: status: { DRDY ERR }
[ 283.292679] ata1: hard resetting link
[ 283.784655] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 283.798562] ata1.00: configured for PIO0
[ 283.799926] ata1: EH complete
[ 288.810765] ata1.00: qc timeout (cmd 0xa0)
[ 288.810793] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 288.810799] ata1.00: irq_stat 0x40000001
[ 288.810809] sr 0:0:0:0: CDB:
[ 288.810813] Test Unit Ready: 00 00 00 00 00 00
[ 288.810833] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 3
[ 288.810833] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 288.810839] ata1.00: status: { DRDY ERR }
[ 288.810850] ata1: hard resetting link
[ 289.302947] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 289.316189] ata1.00: configured for PIO0
[ 289.317317] ata1: EH complete
[ 294.324915] ata1.00: qc timeout (cmd 0xa0)
[ 294.324943] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 294.324949] ata1.00: irq_stat 0x40000001
[ 294.324959] sr 0:0:0:0: CDB:
[ 294.324963] Test Unit Ready: 00 00 00 00 00 00
[ 294.324982] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 4
[ 294.324982] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 294.324989] ata1.00: status: { DRDY ERR }
[ 294.324999] ata1: hard resetting link
[ 294.816974] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 294.830921] ata1.00: configured for PIO0
[ 294.832106] ata1: EH complete
[ 299.843047] ata1.00: qc timeout (cmd 0xa0)
[ 299.843076] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 299.843082] ata1.00: irq_stat 0x40000001
[ 299.843091] sr 0:0:0:0: CDB:
[ 299.843095] Test Unit Ready: 00 00 00 00 00 00
[ 299.843115] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 6
[ 299.843115] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 299.843122] ata1.00: status: { DRDY ERR }
[ 299.843132] ata1: hard resetting link
[ 300.335258] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 300.348519] ata1.00: configured for PIO0
[ 300.349566] ata1: EH complete
[ 305.357220] ata1.00: qc timeout (cmd 0xa0)
[ 305.357248] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 305.357254] ata1.00: irq_stat 0x40000001
[ 305.357263] sr 0:0:0:0: CDB:
[ 305.357267] Test Unit Ready: 00 00 00 00 00 00
[ 305.357287] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 7
[ 305.357287] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 305.357294] ata1.00: status: { DRDY ERR }
[ 305.357303] ata1: hard resetting link
[ 305.849279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 305.863258] ata1.00: configured for PIO0
[ 305.864309] ata1: EH complete
[ 310.875376] ata1.00: qc timeout (cmd 0xa0)
[ 310.875404] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 310.875410] ata1.00: irq_stat 0x40000001
[ 310.875420] sr 0:0:0:0: CDB:
[ 310.875424] Test Unit Ready: 00 00 00 00 00 00
[ 310.875443] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 8
[ 310.875443] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 310.875450] ata1.00: status: { DRDY ERR }
[ 310.875460] ata1: hard resetting link
[ 311.367560] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 311.380782] ata1.00: configured for PIO0
[ 311.381973] ata1: EH complete
[ 316.389520] ata1.00: qc timeout (cmd 0xa0)
[ 316.389548] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 316.389554] ata1.00: irq_stat 0x40000001
[ 316.389564] sr 0:0:0:0: CDB:
[ 316.389568] Test Unit Ready: 00 00 00 00 00 00
[ 316.389587] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 9
[ 316.389587] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 316.389594] ata1.00: status: { DRDY ERR }
[ 316.389603] ata1: hard resetting link
[ 316.881708] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 316.895650] ata1.00: configured for PIO0
[ 316.896993] ata1: EH complete
[ 321.907679] ata1.00: qc timeout (cmd 0xa0)
[ 321.907707] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 321.907713] ata1.00: irq_stat 0x40000001
[ 321.907723] sr 0:0:0:0: CDB:
[ 321.907727] Test Unit Ready: 00 00 00 00 00 00
[ 321.907746] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 10
[ 321.907746] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 321.907753] ata1.00: status: { DRDY ERR }
[ 321.907763] ata1: hard resetting link
[ 322.399755] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 322.413144] ata1.00: configured for PIO0
[ 322.414190] ata1: EH complete
[ 327.421827] ata1.00: qc timeout (cmd 0xa0)
[ 327.421855] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 327.421861] ata1.00: irq_stat 0x40000001
[ 327.421871] sr 0:0:0:0: CDB:
[ 327.421875] Test Unit Ready: 00 00 00 00 00 00
[ 327.421894] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 11
[ 327.421894] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 327.421901] ata1.00: status: { DRDY ERR }
[ 327.421911] ata1: hard resetting link
[ 327.914013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 327.928230] ata1.00: configured for PIO0
[ 327.929375] ata1: EH complete
[ 332.939987] ata1.00: qc timeout (cmd 0xa0)
[ 332.940018] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 332.940024] ata1.00: irq_stat 0x40000001
[ 332.940035] sr 0:0:0:0: CDB:
[ 332.940038] Test Unit Ready: 00 00 00 00 00 00
[ 332.940058] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 12
[ 332.940058] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 332.940065] ata1.00: status: { DRDY ERR }
[ 332.940075] ata1: hard resetting link
[ 333.432178] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 333.445528] ata1.00: configured for PIO0
[ 333.446531] ata1: EH complete
[ 338.454135] ata1.00: qc timeout (cmd 0xa0)
[ 338.454162] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 338.454168] ata1.00: irq_stat 0x40000001
[ 338.454178] sr 0:0:0:0: CDB:
[ 338.454182] Test Unit Ready: 00 00 00 00 00 00
[ 338.454202] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 13
[ 338.454202] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 338.454209] ata1.00: status: { DRDY ERR }
[ 338.454218] ata1: hard resetting link
[ 338.946323] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 338.960315] ata1.00: configured for PIO0
[ 338.961619] ata1: EH complete
[ 343.972290] ata1.00: qc timeout (cmd 0xa0)
[ 343.972317] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 343.972323] ata1.00: irq_stat 0x40000001
[ 343.972333] sr 0:0:0:0: CDB:
[ 343.972337] Test Unit Ready: 00 00 00 00 00 00
[ 343.972357] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 14
[ 343.972357] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 343.972364] ata1.00: status: { DRDY ERR }
[ 343.972373] ata1: hard resetting link
[ 344.464485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 344.477794] ata1.00: configured for PIO0
[ 344.478837] ata1: EH complete
[ 349.490442] ata1.00: qc timeout (cmd 0xa0)
[ 349.490470] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 349.490477] ata1.00: irq_stat 0x40000001
[ 349.490488] sr 0:0:0:0: CDB:
[ 349.490492] Test Unit Ready: 00 00 00 00 00 00
[ 349.490511] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 16
[ 349.490511] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 349.490518] ata1.00: status: { DRDY ERR }
[ 349.490527] ata1: hard resetting link
[ 349.982643] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 349.996536] ata1.00: configured for PIO0
[ 349.997962] ata1: EH complete
[ 355.008598] ata1.00: qc timeout (cmd 0xa0)
[ 355.008625] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 355.008632] ata1.00: irq_stat 0x40000001
[ 355.008642] sr 0:0:0:0: CDB:
[ 355.008646] Test Unit Ready: 00 00 00 00 00 00
[ 355.008666] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 17
[ 355.008666] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 355.008673] ata1.00: status: { DRDY ERR }
[ 355.008682] ata1: hard resetting link
[ 355.500670] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 355.514671] ata1.00: configured for PIO0
[ 355.515805] ata1: EH complete
[ 360.526626] ata1.00: qc timeout (cmd 0xa0)
[ 360.526654] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 360.526659] ata1.00: irq_stat 0x40000001
[ 360.526670] sr 0:0:0:0: CDB:
[ 360.526674] Test Unit Ready: 00 00 00 00 00 00
[ 360.526693] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 18
[ 360.526693] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 360.526700] ata1.00: status: { DRDY ERR }
[ 360.526709] ata1: hard resetting link
[ 361.018949] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 361.032168] ata1.00: configured for PIO0
[ 361.033352] ata1: EH complete
[ 361.156682] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 366.048883] ata1.00: qc timeout (cmd 0xa0)
[ 366.048911] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 366.048918] ata1.00: irq_stat 0x40000001
[ 366.048928] sr 0:0:0:0: CDB:
[ 366.048932] Test Unit Ready: 00 00 00 00 00 00
[ 366.048951] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 21
[ 366.048951] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 366.048959] ata1.00: status: { DRDY ERR }
[ 366.048968] ata1: hard resetting link
[ 366.540997] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 366.555059] ata1.00: configured for PIO0
[ 366.556304] ata1: EH complete
[ 371.567063] ata1.00: qc timeout (cmd 0xa0)
[ 371.567091] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 371.567097] ata1.00: irq_stat 0x40000001
[ 371.567107] sr 0:0:0:0: CDB:
[ 371.567112] Test Unit Ready: 00 00 00 00 00 00
[ 371.567132] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 22
[ 371.567132] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 371.567139] ata1.00: status: { DRDY ERR }
[ 371.567148] ata1: hard resetting link
[ 372.059130] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 372.073059] ata1.00: configured for PIO0
[ 372.074252] ata1: EH complete
[ 377.085212] ata1.00: qc timeout (cmd 0xa0)
[ 377.085240] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 377.085246] ata1.00: irq_stat 0x40000001
[ 377.085257] sr 0:0:0:0: CDB:
[ 377.085261] Test Unit Ready: 00 00 00 00 00 00
[ 377.085280] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 23
[ 377.085280] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 377.085287] ata1.00: status: { DRDY ERR }
[ 377.085297] ata1: hard resetting link
[ 377.577414] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 377.590684] ata1.00: configured for PIO0
[ 377.591739] ata1: EH complete
[ 382.599369] ata1.00: qc timeout (cmd 0xa0)
[ 382.599396] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 382.599402] ata1.00: irq_stat 0x40000001
[ 382.599413] sr 0:0:0:0: CDB:
[ 382.599417] Test Unit Ready: 00 00 00 00 00 00
[ 382.599437] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 24
[ 382.599437] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 382.599444] ata1.00: status: { DRDY ERR }
[ 382.599452] ata1: hard resetting link
[ 383.091462] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 383.105445] ata1.00: configured for PIO0
[ 383.106752] ata1: EH complete
[ 388.117396] ata1.00: qc timeout (cmd 0xa0)
[ 388.117423] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 388.117428] ata1.00: irq_stat 0x40000001
[ 388.117439] sr 0:0:0:0: CDB:
[ 388.117443] Test Unit Ready: 00 00 00 00 00 00
[ 388.117462] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 25
[ 388.117462] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 388.117469] ata1.00: status: { DRDY ERR }
[ 388.117478] ata1: hard resetting link
[ 388.609723] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 388.622851] ata1.00: configured for PIO0
[ 388.624035] ata1: EH complete
[ 393.631677] ata1.00: qc timeout (cmd 0xa0)
[ 393.631704] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 393.631710] ata1.00: irq_stat 0x40000001
[ 393.631721] sr 0:0:0:0: CDB:
[ 393.631725] Test Unit Ready: 00 00 00 00 00 00
[ 393.631745] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 26
[ 393.631745] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 393.631752] ata1.00: status: { DRDY ERR }
[ 393.631761] ata1: hard resetting link
[ 394.123750] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 394.137707] ata1.00: configured for PIO0
[ 394.138895] ata1: EH complete
[ 399.149710] ata1.00: qc timeout (cmd 0xa0)
[ 399.149738] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 399.149744] ata1.00: irq_stat 0x40000001
[ 399.149755] sr 0:0:0:0: CDB:
[ 399.149759] Test Unit Ready: 00 00 00 00 00 00
[ 399.149779] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 27
[ 399.149779] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 399.149786] ata1.00: status: { DRDY ERR }
[ 399.149795] ata1: hard resetting link
[ 399.642029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 399.655270] ata1.00: configured for PIO0
[ 399.656455] ata1: EH complete
[ 404.663984] ata1.00: qc timeout (cmd 0xa0)
[ 404.664012] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 404.664018] ata1.00: irq_stat 0x40000001
[ 404.664029] sr 0:0:0:0: CDB:
[ 404.664033] Test Unit Ready: 00 00 00 00 00 00
[ 404.664052] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 28
[ 404.664052] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 404.664059] ata1.00: status: { DRDY ERR }
[ 404.664068] ata1: hard resetting link
[ 405.156050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 405.170002] ata1.00: configured for PIO0
[ 405.171343] ata1: EH complete
[ 410.182135] ata1.00: qc timeout (cmd 0xa0)
[ 410.182162] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 410.182168] ata1.00: irq_stat 0x40000001
[ 410.182179] sr 0:0:0:0: CDB:
[ 410.182183] Test Unit Ready: 00 00 00 00 00 00
[ 410.182203] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 29
[ 410.182203] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 410.182210] ata1.00: status: { DRDY ERR }
[ 410.182218] ata1: hard resetting link
[ 410.674337] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 410.687758] ata1.00: configured for PIO0
[ 410.688953] ata1: EH complete
[ 415.700294] ata1.00: qc timeout (cmd 0xa0)
[ 415.700322] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 415.700328] ata1.00: irq_stat 0x40000001
[ 415.700337] sr 0:0:0:0: CDB:
[ 415.700341] Test Unit Ready: 00 00 00 00 00 00
[ 415.700361] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 415.700361] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 415.700368] ata1.00: status: { DRDY ERR }
[ 415.700378] ata1: hard resetting link
[ 416.192492] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 416.206667] ata1.00: configured for PIO0
[ 416.208104] ata1: EH complete
[ 421.218435] ata1.00: qc timeout (cmd 0xa0)
[ 421.218462] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 421.218468] ata1.00: irq_stat 0x40000001
[ 421.218478] sr 0:0:0:0: CDB:
[ 421.218482] Test Unit Ready: 00 00 00 00 00 00
[ 421.218501] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 1
[ 421.218501] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 421.218508] ata1.00: status: { DRDY ERR }
[ 421.218518] ata1: hard resetting link
[ 421.710650] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 421.723954] ata1.00: configured for PIO0
[ 421.725050] ata1: EH complete
[ 426.732603] ata1.00: qc timeout (cmd 0xa0)
[ 426.732631] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 426.732637] ata1.00: irq_stat 0x40000001
[ 426.732647] sr 0:0:0:0: CDB:
[ 426.732651] Test Unit Ready: 00 00 00 00 00 00
[ 426.732670] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 2
[ 426.732670] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 426.732677] ata1.00: status: { DRDY ERR }
[ 426.732687] ata1: hard resetting link
[ 427.224800] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 427.238636] ata1.00: configured for PIO0
[ 427.240071] ata1: EH complete
[ 427.456769] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 427.828424] init: failsafe main process (1201) killed by TERM signal
[ 427.839080] FS-Cache: Loaded
[ 427.958662] RPC: Registered named UNIX socket transport module.
[ 427.958670] RPC: Registered udp transport module.
[ 427.958674] RPC: Registered tcp transport module.
[ 427.958678] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 428.168668] FS-Cache: Netfs 'nfs' registered for caching
[ 428.336628] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 428.720652] Bluetooth: Core ver 2.20
[ 428.720695] NET: Registered protocol family 31
[ 428.720699] Bluetooth: HCI device and connection manager initialized
[ 428.720709] Bluetooth: HCI socket layer initialized
[ 428.720717] Bluetooth: L2CAP socket layer initialized
[ 428.720732] Bluetooth: SCO socket layer initialized
[ 428.742868] Bluetooth: RFCOMM TTY layer initialized
[ 428.742885] Bluetooth: RFCOMM socket layer initialized
[ 428.742900] Bluetooth: RFCOMM ver 1.11
[ 428.900734] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 428.900743] Bluetooth: BNEP filters: protocol multicast
[ 428.900754] Bluetooth: BNEP socket layer initialized
[ 429.363948] audit: type=1400 audit(1455454975.856:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1429 comm="apparmor_parser"
[ 429.363972] audit: type=1400 audit(1455454975.856:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1429 comm="apparmor_parser"
[ 429.365058] audit: type=1400 audit(1455454975.856:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1429 comm="apparmor_parser"
[ 429.466573] init: cups main process (1446) killed by HUP signal
[ 429.466605] init: cups main process ended, respawning
[ 429.505036] audit: type=1400 audit(1455454975.996:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1504 comm="apparmor_parser"
[ 429.505065] audit: type=1400 audit(1455454975.996:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1504 comm="apparmor_parser"
[ 429.505079] audit: type=1400 audit(1455454975.996:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1504 comm="apparmor_parser"
[ 429.506204] audit: type=1400 audit(1455454976.000:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1504 comm="apparmor_parser"
[ 429.506223] audit: type=1400 audit(1455454976.000:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1504 comm="apparmor_parser"
[ 429.506779] audit: type=1400 audit(1455454976.000:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1504 comm="apparmor_parser"
[ 429.507244] audit: type=1400 audit(1455454976.000:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1503 comm="apparmor_parser"
[ 429.656224] r8169 0000:02:00.0 eth0: link down
[ 429.656254] r8169 0000:02:00.0 eth0: link down
[ 429.656349] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 429.666619] init: samba-ad-dc main process (1406) terminated with status 1
[ 429.936303] init: Failed to spawn thermald main process: unable to execute: No such file or directory - Je n'ai pas installé le paquet spécifique supposé nécessaire à la gestion de deux circuits graphiques. Toutefois la carte additionnelle était en place lorsque j'ai installé l'OS donc à priori c'est bon. Je reprouve bien dans les paramètres deux cartes et deux pilotes (un pour chaque circuits.) Par ailleurs toutes les sorties graphiques présentes semblent fonctionner (vérifié pour les 2 sorties VGA et la sortie HDMI et pour les autres sorties je le suppose.)
- Bootchart n'est plus installé. J'ai effectivement essayé ce truc mais ça a presque tout bloqué et je m'en suis vite débarrassé à partir de la console ! (remove bootchart). Je présume que cette installation a laissé des traces. La commande indiquée semble encore fonctionner :
ls -lh /var/log/bootchart
total 60M
-rw-r--r-- 1 root root 2,0M févr. 12 19:56 LDLC2-trusty-20160212-1.tgz
-rw-r--r-- 1 root root 0 févr. 12 20:07 LDLC2-trusty-20160212-2.png
-rw-r--r-- 1 root root 12M févr. 12 20:07 LDLC2-trusty-20160212-2.tgz
-rw-r--r-- 1 root root 1,2M févr. 12 20:38 LDLC2-trusty-20160212-3.png
-rw-r--r-- 1 root root 13M févr. 12 20:36 LDLC2-trusty-20160212-3.tgz
-rw-r--r-- 1 root root 1,1M févr. 12 20:58 LDLC2-trusty-20160212-4.png
-rw-r--r-- 1 root root 17M févr. 12 20:56 LDLC2-trusty-20160212-4.tgz
-rw-r--r-- 1 root root 1,3M févr. 12 21:56 LDLC2-trusty-20160212-5.png
-rw-r--r-- 1 root root 13M févr. 12 21:54 LDLC2-trusty-20160212-5.tgz_____
Voilà aussi :
cat /etc/apt/sources.list | grep -v "#"
deb cdrom:[Xubuntu 14.04.3 LTS _Trusty Tahr_ - Beta amd64 (20150805)]/ trusty main multiverse restricted universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb-src http://fr.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu trusty-security main restricted
deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted
deb http://security.ubuntu.com/ubuntu trusty-security universe
deb-src http://security.ubuntu.com/ubuntu trusty-security universe
deb http://security.ubuntu.com/ubuntu trusty-security multiverse
deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse
deb http://extras.ubuntu.com/ubuntu trusty main
deb-src http://extras.ubuntu.com/ubuntu trusty main ls -lha .xsession*
-rw------- 1 christian christian 278 févr. 14 14:29 .xsession-errors
-rw------- 1 christian christian 321 févr. 14 14:29 .xsession-errors.old cat .xsession-errors | tail -n 30
openConnection: connect: Aucun fichier ou dossier de ce type
cannot connect to brltty at :0
Script for ibus started at run_im.
Script for auto started at run_im.
Script for default started at run_im.
init: Le processus gpg-agent post-stop (5402) a été tué par le signal TERMEt à propos de la seconde grosse suspicion voilà toujours ça :
cat /etc/fstab | grep -v "#"
UUID=cd78ba11-9fb1-4cef-877b-d7c5dc7b34fc / ext4 errors=remount-ro 0 1
UUID=969dc59e-bae8-4013-a569-ec70959ee6c7 /home ext4 defaults 0 2
UUID=41f6e5b4-77aa-4028-9893-f60b121d75c6 none swap sw 0 0 J'envoie le retour fsck au prochain message,
Merci pour tes attentions !
Hors ligne
#7 Le 14/02/2016, à 17:44
- Rufus T. Firefly
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Il y a ce bloc qui revient un grand nombre de fois :
...
[ 101.724916] ata1: EH complete
[ 106.735668] ata1.00: qc timeout (cmd 0xa0)
[ 106.735695] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 106.735701] ata1.00: irq_stat 0x40000001
[ 106.735711] sr 0:0:0:0: CDB:
[ 106.735715] Test Unit Ready: 00 00 00 00 00 00
[ 106.735735] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 25
[ 106.735735] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 106.735742] ata1.00: status: { DRDY ERR }
[ 106.735750] ata1: hard resetting link
[ 107.227850] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 107.241836] ata1.00: configured for PIO0
...Et ça ressemble beaucoup à ça, je trouve : https://bugs.launchpad.net/ubuntu/+sour … bug/544548
Ce n'est sans doute pas suffisant, comme explication, mais ce n'est quand même pas normal... Et on trouve le DRDY ERR que tu mentionnes. Ce serait lié au lecteur de cd...
Dernière modification par Rufus T. Firefly (Le 14/02/2016, à 17:45)
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#8 Le 14/02/2016, à 20:23
- moko138
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Bien vu, Rufus !
- -
Croa,
fstab correct,
.xsession-errors* de tailles très correctes,
pas de dépôts "pr*posed" :
c'est bon
tu peux poster /var/log/bootchart/LDLC2-trusty-20160212-5.png sur pix.tdct.org et nous donner le lien. (Je ne te promets pas de le lire correctement, mais j'essaierai).
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 14/02/2016, à 20:33
- moko138
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Pour mémoire :
piste ata
piste smart (bios, état du MBR et du reste du disque),
piste fsck
piste grub bidouillé (boot-info)
...
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#10 Le 14/02/2016, à 21:01
- Croa
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
J'ai un fsck :
sudo fsck -yfv /dev/sdb3
fsck de util-linux 2.20.1
e2fsck 1.42.9 (4-Feb-2014)
Passe 1 : vérification des i-noeuds, des blocs et des tailles
Passe 2 : vérification de la structure des répertoires
Passe 3 : vérification de la connectivité des répertoires
Passe 4 : vérification des compteurs de référence
Passe 5 : vérification de l'information du sommaire de groupe
492214 i-noeuds utilisés (3.63%, sur 13541376)
264 fichiers non contigus (0.1%)
398 répertoires non contigus (0.1%)
nombre d'i-noeuds avec des blocs ind/dind/tind : 0/0/0
Histogramme des profondeurs d'extents : 416082/158
8746440 blocs utilisés (16.15%, sur 54153808)
0 bloc défectueux
2 fichiers de grande taille
343316 fichiers normaux
55167 répertoires
59 fichiers de périphérique en mode caractère
25 fichiers de périphérique en mode bloc
0 fifo
25 liens
93605 liens symboliques (75849 liens symboliques rapides)
33 sockets
------------
492230 fichiers Et un rapport Smart :
sudo smartctl -a /dev/sdb
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-77-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" HDD DT01ACA...
Device Model: TOSHIBA DT01ACA050
Serial Number: 85HE2H5AS
LU WWN Device Id: 5 000039 fe0f038ae
Firmware Version: MS1OA750
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Feb 14 18:37:06 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 3498) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 59) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 142 142 054 Pre-fail Offline - 70
3 Spin_Up_Time 0x0007 125 125 024 Pre-fail Always - 182 (Average 184)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 746
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 113 113 020 Pre-fail Offline - 35
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 412
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 744
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 746
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 746
194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 15/35)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 282 -
# 2 Extended offline Completed without error 00% 253 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay. J'espère que ça vous dit quelque chose
Hors ligne
#11 Le 14/02/2016, à 23:14
- Croa
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
À Moko, (le lien est dans l'image)
À Rufus,
Le lecteur CD-DVD est IDE connecté SATA à l'aide d'un adaptateur cavalier. Ce système n'est sûrement pas top par rapport aux normes et le fait est que ça va tout juste pour lire des DVD : J'avais prévu de remonter le graveur mais ça n'a pas été possible. Comme j'avais aussi un simple lecteur dans mon bazar je me suis dit que ça irait avec le lecteur.
Demain j'essaye de le débrancher !
Hors ligne
#12 Le 15/02/2016, à 07:23
- moko138
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Croa a écrit :
(le lien est dans l'image) http://pix.tdct.org/upload/thumb/1455483174.png
Hou là ! Il va me falloir du temps pour apprendre à lire ça !
J'ai soigneusement téléchargé le png de bootchart. Mais la lecture des dmesg m'est moins opaque.
Le lecteur CD-DVD est IDE connecté SATA à l'aide d'un adaptateur cavalier. (...) Demain j'essaye de le débrancher !
Je suppose que par "adaptateur cavalier", tu entends adaptateur IDE <--> Sata, non ?
Comme le Sata autorise les (dé)branchements à chaud, je ne vois pas l'intérêt de démarrer avec l'adaptateur branché, sauf quand tu veux démarrer sur un dvd.
- -
Si je quitte la session graphique ( «Ctrl»+«Alt»+«F1») je tombe sur un défilement de tags de 4 ou 5 lignes avec des DRDY ERR. La console est évidemment inutilisable... Sauf à savoir lancer des commandes par cœur sans la moindre faute !
Ce ne sont pas des "tags" mais des messages (du noyau).
J'en ai aussi sur mon notebook. Il suffit de savoir que ces messages n'interfèrent pas avec ce que tu tapes.
Ainsi, si tu veux taper
sudo parted -let que ça s'affiche
sudo pabla bla
bla bla
bla blarted -lc'est bien sûr perturbant pour l'oeil mais la commande marche.
Dernière modification par moko138 (Le 15/02/2016, à 07:32)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 15/02/2016, à 10:50
- Croa
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
MERCI À TOUS !
Notamment à Rufus : Le problème était bien à rechercher du coté du lecteur de DVD.
L'adaptateur "cavalier" SATA-IDE (petit circuit électronique monté sur la prise IDE du périphérique avec 2 prises, une prise SATA et une prise Alimentation en 5Volts) n'est pas complètement transparent, informatiquement parlant. Il semblerait donc qu'avec Linux sa transparence ne soit pas assurée. Le DVD est tout de même correctement reconnu si c'est lui qui démarre en premier d'où la mauvaise piste des paramètres GRUB avec laquelle j'ai perdu énormément de temps.
Il s'agit d'un dispositif ROHS VER:FINENESS01 (En tout cas c'est ce qui est écrit dessus.)
Il a suffit de débrancher le 5 volts : Démarrage système 45 secondes !
moko138 a écrit :Comme le Sata autorise les (dé)branchements à chaud, je ne vois pas l'intérêt de démarrer avec l'adaptateur branché, sauf quand tu veux démarrer sur un dvd.
Merci : Je vais donc ajouter un petit interrupteur en façade de l'UC (Coût 0 € vu que j'ai de la réserve !)
Mon problème est donc résolu. J'attends ce soir pour mettre le sujet en [résolu] des fois que quelqu'un ait encore une suggestion à faire.
Hors ligne
#14 Le 15/02/2016, à 11:03
- Croa
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
moko138 a écrit :
Ce ne sont pas des "tags" mais des messages (du noyau).
J'en ai aussi sur mon notebook. Il suffit de savoir que ces messages n'interfèrent pas avec ce que tu tapes.
Ainsi, si tu veux tapersudo parted -let que ça s'affiche
sudo pabla bla bla bla bla blarted -lc'est bien sûr perturbant pour l'oeil mais la commande marche.
Effectivement on y arrive... Sauf que les «messages (du noyau)» s'intercalent à l'intérieur de la frappe et qu'il arrive même un moment où ça sort de l'écran.
Donc si tu ne sais pas faire par cœur et sans la moindre faute impossible de s'en sortir ! Bon, pour frapper son log, son mot de passe puis un sudo reboot et encore son mot de passe ça va...
Mais au delà c'est carrément impossible (au moins à mon niveau.)
Hors ligne
#15 Le 15/02/2016, à 13:05
- Rufus T. Firefly
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Il n'y a pas de mérite. J'ai vu ce bloc se répéter et ce qui m'a intrigué, c'est ça :
[ 106.735668] ata1.00: qc timeout (cmd 0xa0)Timeout ?
et ça :
[ 106.735711] sr 0:0:0:0: CDB: sr ? Comme il y a du ata aussi, /dev/sr0 ? Lecteur de cd ?
Du bluff, quoi ! 
La provocation est une façon de remettre la réalité sur ses pieds. (Bertolt Brecht)
Il n'y a pas de route royale pour la science et ceux-là seulement ont chance d'arriver à ses sommets lumineux qui ne craignent pas de se fatiguer à gravir ses sentiers escarpés. (Karl Marx)
Il est devenu plus facile de penser la fin du monde que la fin du capitalisme
Hors ligne
#16 Le 15/02/2016, à 20:11
- Croa
Re : Instabilité machine, tags & démarrages laborieux. [Résolu]
Rufus T. a écrit :
Du bluff, quoi !
Sauf qu'il faut savoir lire le langage machine là,
Heureusement que vous étiez là les gars !
Hors ligne