Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 24/08/2016, à 15:53

Zildjian

Mauvais redimensionnement des fenetres - déplacement clic+souris

Bonjour à tous,

J'ai un problème de redimensionnement de fenêtres, ça fait un bout de temps que je l'ai remarqué (depuis l'arrivée d'Unity certainement? De façon certaine sous les LTS 14.04 et 16.04).

Le problème :
Lorsqu'une application est maximisée et que je veut la déplacer par un clic et déplacement de la souris, il arrive parfois que cette fenêtre soit "mal" redimensionnée : elle est de la taille d'un pixel en largeur et de la hauteur de la barre de menu. Bien entendu, si je continu mon déplacement pour aller docker cette fenêtre ailleurs sur l'un ou l'autre des mes écrans, tout redevient normale. Par contre, si j’arrête le déplacement par exemple au milieu de mon écran, la fenêtre reste de très petite taille (et j'utilise alors Super+ArrowUp pour retrouver une taille acceptable).
J'essaierai de faire une capture d'écran la prochaine fois que cela se produit mais le phénomène est complètement aléatoire...

Je l'ai remarqué pour la première fois en utilisant Matlab(R2010b, R2015a) mais je le vois sur d'autres applications (Atom par exemple).
Concernant les points qu'il me semble judicieux d'apporter : installation toute fraîche d'Ubuntu 16.04 (installation, pas mise à jour depuis 14.04) avec Unity par défaut.
Packages installés qui (à mon humble avis) pourraient être en interaction avec mon problème :
CompizConfigSettingManager, Nemo.
Mon PC (portable, remarqué sur plusieurs modèles et marques) est quasiment tout le temps branché à un écran secondaire et je me sert des deux écrans.

Désolé si ce post fait doublon mais je n'ai pas trouvé ce que je cherchais et il m'est difficile d'exprimer mon problème en anglais! En tout cas, si jamais quelqu'un à déjà vu quelque chose à ce sujet, merci de me le signaler!

Dans tous les cas, merci à vous!

J'ai parcouru l'ensemble des recommandations pour les posts et je ne suis pas sur que mon XOrg.conf ou autre fichier de conf soit utile dans ce cas donc dans le doute, je ne met rien... N'hésitez pas à me demander toute info complémentaire qui pourrait aider.


HP EliteBook 840-G2 : Ubuntu 16.04.1 LTS Xenial Xerus
Processeur : Intel Core i5-5300U CPU @ 2.30GHz
Type OS : 64 bits
Carte graphique : Intel Corporation Broadwell-U Integrated Graphics (rev 09)

Hors ligne

#2 Le 25/08/2016, à 02:21

Pascaltech

Re : Mauvais redimensionnement des fenetres - déplacement clic+souris

Bonjour,

Pourquoi ne pas passer à la version 16.04.1 ?

Peux-tu renseigner ta configuration dans ta signature ? Merci.

Peux-tu donner ton fichier /var/log/Xorg.0.log et suivants, donner le retour des commandes :

lshw -businfo

et

lspci | grep VGA

Emachine el1200, Xubuntu 20.04 LTS
Traductions guides serveur & grub et liens utiles Classement CG
inxi -F sudo lshw dpkg -l

Hors ligne

#3 Le 25/08/2016, à 08:40

Zildjian

Re : Mauvais redimensionnement des fenetres - déplacement clic+souris

Bonjour,

J'ai renseigné ma configuration en signature, ce qui répond à la question de version (j'étais ben en 16.04.1)

Contenu de /var/log/Xorg.0.log

[     7.949] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[     7.949] X Protocol Version 11, Revision 0
[     7.949] Build Operating System: Linux 3.13.0-92-generic x86_64 Ubuntu
[     7.949] Current Operating System: Linux clement-840-G2 4.4.0-34-generic #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 x86_64
[     7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=c777e13f-869d-4c3d-90fe-12d0b6bd8451 ro quiet splash vt.handoff=7
[     7.949] Build Date: 22 July 2016  07:50:34AM
[     7.949] xorg-server 2:1.18.3-1ubuntu2.3 (For technical support please see http://www.ubuntu.com/support) 
[     7.949] Current version of pixman: 0.33.6
[     7.949] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     7.949] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 25 08:40:43 2016
[     7.950] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.950] (==) No Layout section.  Using the first Screen section.
[     7.950] (==) No screen section available. Using defaults.
[     7.950] (**) |-->Screen "Default Screen Section" (0)
[     7.950] (**) |   |-->Monitor "<default monitor>"
[     7.951] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     7.951] (==) Automatically adding devices
[     7.951] (==) Automatically enabling devices
[     7.951] (==) Automatically adding GPU devices
[     7.951] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     7.951] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     7.951] 	Entry deleted from font path.
[     7.951] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     7.951] 	Entry deleted from font path.
[     7.951] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     7.951] 	Entry deleted from font path.
[     7.951] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     7.951] 	Entry deleted from font path.
[     7.951] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     7.951] 	Entry deleted from font path.
[     7.951] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     7.951] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     7.951] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.951] (II) Loader magic: 0x55a83a914da0
[     7.951] (II) Module ABI versions:
[     7.951] 	X.Org ANSI C Emulation: 0.4
[     7.951] 	X.Org Video Driver: 20.0
[     7.951] 	X.Org XInput driver : 22.1
[     7.951] 	X.Org Server Extension : 9.0
[     7.952] (++) using VT number 7

[     7.952] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     7.953] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.954] (--) PCI:*(0:0:2:0) 8086:1616:103c:2216 rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64
[     7.954] (II) LoadModule: "glx"
[     7.955] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     7.974] (II) Module glx: vendor="X.Org Foundation"
[     7.974] 	compiled for 1.18.3, module version = 1.0.0
[     7.974] 	ABI class: X.Org Server Extension, version 9.0
[     7.974] (==) AIGLX enabled
[     7.974] (==) Matched intel as autoconfigured driver 0
[     7.974] (==) Matched intel as autoconfigured driver 1
[     7.974] (==) Matched modesetting as autoconfigured driver 2
[     7.974] (==) Matched fbdev as autoconfigured driver 3
[     7.974] (==) Matched vesa as autoconfigured driver 4
[     7.975] (==) Assigned the driver to the xf86ConfigLayout
[     7.975] (II) LoadModule: "intel"
[     7.975] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     7.978] (II) Module intel: vendor="X.Org Foundation"
[     7.979] 	compiled for 1.18.1, module version = 2.99.917
[     7.979] 	Module class: X.Org Video Driver
[     7.979] 	ABI class: X.Org Video Driver, version 20.0
[     7.979] (II) LoadModule: "modesetting"
[     7.979] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     7.979] (II) Module modesetting: vendor="X.Org Foundation"
[     7.979] 	compiled for 1.18.3, module version = 1.18.3
[     7.979] 	Module class: X.Org Video Driver
[     7.979] 	ABI class: X.Org Video Driver, version 20.0
[     7.979] (II) LoadModule: "fbdev"
[     7.980] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     7.980] (II) Module fbdev: vendor="X.Org Foundation"
[     7.980] 	compiled for 1.18.1, module version = 0.4.4
[     7.980] 	Module class: X.Org Video Driver
[     7.980] 	ABI class: X.Org Video Driver, version 20.0
[     7.980] (II) LoadModule: "vesa"
[     7.980] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     7.981] (II) Module vesa: vendor="X.Org Foundation"
[     7.981] 	compiled for 1.18.1, module version = 2.3.4
[     7.981] 	Module class: X.Org Video Driver
[     7.981] 	ABI class: X.Org Video Driver, version 20.0
[     7.981] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     7.981] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     7.981] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     7.981] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     7.981] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     7.981] (II) FBDEV: driver for framebuffer: fbdev
[     7.981] (II) VESA: driver for VESA chipsets: vesa
[     7.982] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[     7.982] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 (Timo Aaltonen <tjaalton@debian.org>)
[     7.982] (II) intel(0): SNA compiled for use with valgrind
[     7.983] (WW) Falling back to old probe method for modesetting
[     7.983] (WW) Falling back to old probe method for fbdev
[     7.983] (II) Loading sub module "fbdevhw"
[     7.983] (II) LoadModule: "fbdevhw"
[     7.983] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     7.983] (II) Module fbdevhw: vendor="X.Org Foundation"
[     7.983] 	compiled for 1.18.3, module version = 0.0.2
[     7.983] 	ABI class: X.Org Video Driver, version 20.0
[     7.983] (WW) Falling back to old probe method for vesa
[     7.984] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5500
[     7.984] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[     7.984] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     7.984] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     7.984] (==) intel(0): RGB weight 888
[     7.984] (==) intel(0): Default visual is TrueColor
[     7.985] (II) intel(0): Output eDP1 has no monitor section
[     8.000] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     8.000] (II) intel(0): Enabled output eDP1
[     8.000] (II) intel(0): Output DP1 has no monitor section
[     8.000] (II) intel(0): Enabled output DP1
[     8.000] (II) intel(0): Output HDMI1 has no monitor section
[     8.000] (II) intel(0): Enabled output HDMI1
[     8.000] (II) intel(0): Output DP2 has no monitor section
[     8.000] (II) intel(0): Enabled output DP2
[     8.000] (II) intel(0): Output HDMI2 has no monitor section
[     8.000] (II) intel(0): Enabled output HDMI2
[     8.000] (II) intel(0): Output DP1-1 has no monitor section
[     8.000] (II) intel(0): Enabled output DP1-1
[     8.000] (II) intel(0): Output DP1-2 has no monitor section
[     8.000] (II) intel(0): Enabled output DP1-2
[     8.000] (II) intel(0): Output DP1-3 has no monitor section
[     8.000] (II) intel(0): Enabled output DP1-3
[     8.000] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     8.000] (II) intel(0): Output VIRTUAL1 has no monitor section
[     8.000] (II) intel(0): Enabled output VIRTUAL1
[     8.000] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[     8.000] (--) intel(0): Output DP1-2 using initial mode 1920x1080 on pipe 1
[     8.000] (==) intel(0): TearFree disabled
[     8.000] (==) intel(0): DPI set to (96, 96)
[     8.000] (II) Loading sub module "dri2"
[     8.000] (II) LoadModule: "dri2"
[     8.000] (II) Module "dri2" already built-in
[     8.000] (II) Loading sub module "present"
[     8.000] (II) LoadModule: "present"
[     8.000] (II) Module "present" already built-in
[     8.001] (II) UnloadModule: "modesetting"
[     8.001] (II) Unloading modesetting
[     8.001] (II) UnloadModule: "fbdev"
[     8.001] (II) Unloading fbdev
[     8.001] (II) UnloadSubModule: "fbdevhw"
[     8.001] (II) Unloading fbdevhw
[     8.001] (II) UnloadModule: "vesa"
[     8.001] (II) Unloading vesa
[     8.001] (==) Depth 24 pixmap format is 32 bpp
[     8.003] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[     8.003] (==) intel(0): Backing store enabled
[     8.003] (==) intel(0): Silken mouse enabled
[     8.004] (II) intel(0): HW Cursor enabled
[     8.004] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     8.004] (==) intel(0): DPMS enabled
[     8.004] (==) intel(0): Display hotplug detection enabled
[     8.005] (II) intel(0): [DRI2] Setup complete
[     8.005] (II) intel(0): [DRI2]   DRI driver: i965
[     8.005] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     8.005] (II) intel(0): direct rendering: DRI2 enabled
[     8.005] (II) intel(0): hardware support for Present enabled
[     8.005] (--) RandR disabled
[     8.010] (II) SELinux: Disabled on system
[     8.040] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     8.040] (II) AIGLX: enabled GLX_ARB_create_context
[     8.040] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     8.040] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     8.040] (II) AIGLX: enabled GLX_INTEL_swap_event
[     8.040] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     8.040] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     8.040] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     8.040] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     8.040] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     8.040] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     8.040] (II) AIGLX: Loaded and initialized i965
[     8.040] (II) GLX: Initialized DRI2 GL provider for screen 0
[     8.044] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     8.044] (II) intel(0): switch to mode 1920x1080@60.0 on DP1-2 using pipe 1, position (0, 0), rotation normal, reflection none
[     8.045] (II) intel(0): Setting screen physical size to 508 x 285
[     8.089] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     8.089] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.089] (II) LoadModule: "evdev"
[     8.090] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     8.091] (II) Module evdev: vendor="X.Org Foundation"
[     8.091] 	compiled for 1.18.1, module version = 2.10.1
[     8.091] 	Module class: X.Org XInput Driver
[     8.091] 	ABI class: X.Org XInput driver, version 22.1
[     8.091] (II) Using input driver 'evdev' for 'Power Button'
[     8.091] (**) Power Button: always reports core events
[     8.091] (**) evdev: Power Button: Device: "/dev/input/event2"
[     8.091] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.091] (--) evdev: Power Button: Found keys
[     8.091] (II) evdev: Power Button: Configuring as keyboard
[     8.091] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     8.091] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.091] (**) Option "xkb_rules" "evdev"
[     8.091] (**) Option "xkb_model" "pc105"
[     8.091] (**) Option "xkb_layout" "fr"
[     8.091] (**) Option "xkb_variant" "latin9"
[     8.113] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     8.113] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.113] (II) Using input driver 'evdev' for 'Video Bus'
[     8.113] (**) Video Bus: always reports core events
[     8.113] (**) evdev: Video Bus: Device: "/dev/input/event4"
[     8.113] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.113] (--) evdev: Video Bus: Found keys
[     8.113] (II) evdev: Video Bus: Configuring as keyboard
[     8.113] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event4"
[     8.113] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.113] (**) Option "xkb_rules" "evdev"
[     8.113] (**) Option "xkb_model" "pc105"
[     8.113] (**) Option "xkb_layout" "fr"
[     8.113] (**) Option "xkb_variant" "latin9"
[     8.114] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     8.114] (II) No input driver specified, ignoring this device.
[     8.114] (II) This device may have been added with another device file.
[     8.114] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     8.114] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     8.114] (II) Using input driver 'evdev' for 'Sleep Button'
[     8.114] (**) Sleep Button: always reports core events
[     8.114] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[     8.114] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     8.114] (--) evdev: Sleep Button: Found keys
[     8.114] (II) evdev: Sleep Button: Configuring as keyboard
[     8.114] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     8.115] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     8.115] (**) Option "xkb_rules" "evdev"
[     8.115] (**) Option "xkb_model" "pc105"
[     8.115] (**) Option "xkb_layout" "fr"
[     8.115] (**) Option "xkb_variant" "latin9"
[     8.116] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[     8.116] (II) No input driver specified, ignoring this device.
[     8.116] (II) This device may have been added with another device file.
[     8.116] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[     8.116] (II) No input driver specified, ignoring this device.
[     8.116] (II) This device may have been added with another device file.
[     8.116] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[     8.116] (II) No input driver specified, ignoring this device.
[     8.116] (II) This device may have been added with another device file.
[     8.117] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/event5)
[     8.117] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"
[     8.117] (II) Using input driver 'evdev' for 'Microsoft  Microsoft Basic Optical Mouse v2.0 '
[     8.117] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : always reports core events
[     8.117] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event5"
[     8.172] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb
[     8.172] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
[     8.172] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
[     8.172] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found relative axes
[     8.172] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
[     8.172] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
[     8.172] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support
[     8.172] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5
[     8.172] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.172] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:045E:00CB.0001/input/input11/event5"
[     8.172] (II) XINPUT: Adding extended input device "Microsoft  Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 9)
[     8.172] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.
[     8.172] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1
[     8.172] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0
[     8.172] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000
[     8.172] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4
[     8.173] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/mouse0)
[     8.173] (II) No input driver specified, ignoring this device.
[     8.173] (II) This device may have been added with another device file.
[     8.173] (II) config/udev: Adding input device HP HD Webcam (/dev/input/event8)
[     8.173] (**) HP HD Webcam: Applying InputClass "evdev keyboard catchall"
[     8.173] (II) Using input driver 'evdev' for 'HP HD Webcam'
[     8.173] (**) HP HD Webcam: always reports core events
[     8.173] (**) evdev: HP HD Webcam: Device: "/dev/input/event8"
[     8.173] (--) evdev: HP HD Webcam: Vendor 0x5c8 Product 0x374
[     8.173] (--) evdev: HP HD Webcam: Found keys
[     8.173] (II) evdev: HP HD Webcam: Configuring as keyboard
[     8.173] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input14/event8"
[     8.173] (II) XINPUT: Adding extended input device "HP HD Webcam" (type: KEYBOARD, id 10)
[     8.173] (**) Option "xkb_rules" "evdev"
[     8.173] (**) Option "xkb_model" "pc105"
[     8.173] (**) Option "xkb_layout" "fr"
[     8.173] (**) Option "xkb_variant" "latin9"
[     8.174] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[     8.174] (II) No input driver specified, ignoring this device.
[     8.174] (II) This device may have been added with another device file.
[     8.174] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[     8.174] (II) No input driver specified, ignoring this device.
[     8.174] (II) This device may have been added with another device file.
[     8.175] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     8.175] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     8.175] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     8.175] (**) AT Translated Set 2 keyboard: always reports core events
[     8.175] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[     8.175] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     8.175] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     8.175] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     8.175] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     8.175] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     8.175] (**) Option "xkb_rules" "evdev"
[     8.175] (**) Option "xkb_model" "pc105"
[     8.175] (**) Option "xkb_layout" "fr"
[     8.175] (**) Option "xkb_variant" "latin9"
[     8.176] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
[     8.176] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[     8.176] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[     8.176] (**) PS/2 Generic Mouse: always reports core events
[     8.176] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event6"
[     8.176] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[     8.176] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[     8.176] (--) evdev: PS/2 Generic Mouse: Found relative axes
[     8.176] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[     8.176] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[     8.176] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[     8.176] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.176] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event6"
[     8.176] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 12)
[     8.176] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[     8.176] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[     8.176] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[     8.176] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[     8.176] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[     8.177] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[     8.177] (II) No input driver specified, ignoring this device.
[     8.177] (II) This device may have been added with another device file.
[     8.177] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[     8.177] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     8.177] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[     8.177] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     8.177] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     8.177] (II) LoadModule: "synaptics"
[     8.177] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     8.177] (II) Module synaptics: vendor="X.Org Foundation"
[     8.177] 	compiled for 1.18.1, module version = 1.8.2
[     8.177] 	Module class: X.Org XInput Driver
[     8.177] 	ABI class: X.Org XInput driver, version 22.1
[     8.177] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     8.177] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     8.177] (**) Option "Device" "/dev/input/event7"
[     8.248] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1360 - 5668 (res 43)
[     8.248] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1160 - 4762 (res 70)
[     8.248] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     8.248] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     8.248] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     8.248] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     8.248] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     8.248] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     8.296] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event7"
[     8.296] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[     8.296] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     8.296] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     8.296] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[     8.296] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     8.296] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     8.296] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     8.296] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     8.296] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     8.296] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[     8.296] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     8.298] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event9)
[     8.298] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[     8.298] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[     8.299] (**) HP Wireless hotkeys: always reports core events
[     8.299] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event9"
[     8.299] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[     8.299] (--) evdev: HP Wireless hotkeys: Found keys
[     8.299] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[     8.299] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event9"
[     8.299] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 14)
[     8.299] (**) Option "xkb_rules" "evdev"
[     8.299] (**) Option "xkb_model" "pc105"
[     8.299] (**) Option "xkb_layout" "fr"
[     8.299] (**) Option "xkb_variant" "latin9"
[     8.299] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event15)
[     8.299] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     8.299] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[     8.299] (**) HP WMI hotkeys: always reports core events
[     8.299] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event15"
[     8.299] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[     8.299] (--) evdev: HP WMI hotkeys: Found keys
[     8.299] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[     8.299] (**) Option "config_info" "udev:/sys/devices/virtual/input/input21/event15"
[     8.299] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[     8.299] (**) Option "xkb_rules" "evdev"
[     8.299] (**) Option "xkb_model" "pc105"
[     8.299] (**) Option "xkb_layout" "fr"
[     8.299] (**) Option "xkb_variant" "latin9"
[     9.140] (II) intel(0): EDID vendor "AUO", prod id 4925
[     9.140] (II) intel(0): Printing DDC gathered Modelines:
[     9.140] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)
[     9.288] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     9.288] (II) No input driver specified, ignoring this device.
[     9.288] (II) This device may have been added with another device file.
[     9.289] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event16)
[     9.289] (II) No input driver specified, ignoring this device.
[     9.289] (II) This device may have been added with another device file.
[     9.533] (II) intel(0): resizing framebuffer to 3840x1080
[     9.565] (II) intel(0): switch to mode 1920x1080@60.0 on DP1-2 using pipe 1, position (1920, 0), rotation normal, reflection none
[    16.694] (II) intel(0): resizing framebuffer to 1920x2160
[    16.723] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 1080), rotation normal, reflection none
[    16.728] (II) intel(0): switch to mode 1920x1080@60.0 on DP1-2 using pipe 1, position (0, 0), rotation normal, reflection none

Sortie de

sudo lshw -businfo
Bus info          Périphérique  Classe         Description
============================================================
                                  system         HP EliteBook 840 G2 (G8S00AV)
                                  bus            2216
                                  memory         64KiB BIOS
cpu@0                             processor      Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz
                                  memory         32KiB L1 cache
                                  memory         256KiB L2 cache
                                  memory         3MiB L3 cache
                                  memory         32KiB L1 cache
                                  memory         8GiB Mémoire Système
                                  memory         8GiB SODIMM DDR3 Synchrone 1600 MHz (0,6 ns)
                                  memory         DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revisi
pci@0000:00:00.0                  bridge         Broadwell-U Host Bridge -OPI
pci@0000:00:02.0                  display        Broadwell-U Integrated Graphics
pci@0000:00:03.0                  multimedia     Broadwell-U Audio Controller
pci@0000:00:14.0                  bus            Wildcat Point-LP USB xHCI Controller
usb@3             usb3            bus            xHCI Host Controller
usb@3:1                           bus            USB5534B
usb@3:3                           bus            USB5534B
usb@2             usb2            bus            xHCI Host Controller
usb@2:1                           bus            USB2134B
usb@2:1.2                         input          Microsoft Basic Optical Mouse v2.0
usb@2:3                           bus            USB2134B
usb@2:4                           communication  Interface sans fil Bluetooth
usb@2:7                           multimedia     HP HD Webcam
pci@0000:00:16.0                  communication  Wildcat Point-LP MEI Controller #1
pci@0000:00:19.0  enp0s25         network        Ethernet Connection (3) I218-LM
pci@0000:00:1b.0                  multimedia     Wildcat Point-LP High Definition Audio Controller
pci@0000:00:1c.0                  bridge         Wildcat Point-LP PCI Express Root Port #1
pci@0000:00:1c.1                  bridge         Wildcat Point-LP PCI Express Root Port #2
pci@0000:02:00.0                  generic        RTS5227 PCI Express Card Reader
pci@0000:00:1c.3                  bridge         Wildcat Point-LP PCI Express Root Port #4
pci@0000:03:00.0  wlo1            network        Wireless 7265
pci@0000:00:1d.0                  bus            Wildcat Point-LP USB EHCI Controller
usb@1             usb1            bus            EHCI Host Controller
usb@1:1                           bus            Concentrateur USB
pci@0000:00:1f.0                  bridge         Wildcat Point-LP LPC Controller
pci@0000:00:1f.2                  storage        Wildcat Point-LP SATA Controller [AHCI Mode]
pci@0000:00:1f.3                  bus            Wildcat Point-LP SMBus Controller
                  scsi1           storage        
scsi@1:0.0.0      /dev/sda        disk           500GB TOSHIBA MQ01ACF0
scsi@1:0.0.0,1    /dev/sda1       volume         1025MiB Windows NTFS volume
scsi@1:0.0.0,2    /dev/sda2       volume         174GiB Windows NTFS volume
scsi@1:0.0.0,3    /dev/sda3       volume         287GiB Windows NTFS volume
scsi@1:0.0.0,4    /dev/sda4       volume         2GiB Windows FAT volume
                  scsi3           storage        
scsi@3:0.0.0      /dev/sdb        disk           250GB Crucial_CT250MX2
scsi@3:0.0.0,1    /dev/sdb1       volume         63GiB Volume EXT4
scsi@3:0.0.0,2    /dev/sdb2       volume         8065MiB Linux swap volume
scsi@3:0.0.0,3    /dev/sdb3       volume         161GiB Volume EXT4
                                  power          CM03050XL

Sortie de

lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09)

HP EliteBook 840-G2 : Ubuntu 16.04.1 LTS Xenial Xerus
Processeur : Intel Core i5-5300U CPU @ 2.30GHz
Type OS : 64 bits
Carte graphique : Intel Corporation Broadwell-U Integrated Graphics (rev 09)

Hors ligne

#4 Le 25/08/2016, à 14:47

Pascaltech

Re : Mauvais redimensionnement des fenetres - déplacement clic+souris

Bonjour,

Le fichier Xorg.0.log informe que ta carte est correctement connectée et reconnue :

[     7.953] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.954] (--) PCI:*(0:0:2:0) 8086:1616:103c:2216 rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64

Le driver d'écran est :

[     7.975] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

Là, je ne comprends pas :

[     8.045] (II) intel(0): Setting screen physical size to 508 x 285

Là, c'est mieux :

[     9.140] (II) intel(0): Modeline "1920x1080"x0.0  141.00  1920 1936 1952 2104  1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)
[     9.288] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     9.288] (II) No input driver specified, ignoring this device.
[     9.288] (II) This device may have been added with another device file.
[     9.289] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event16)
[     9.289] (II) No input driver specified, ignoring this device.
[     9.289] (II) This device may have been added with another device file.
[     9.533] (II) intel(0): resizing framebuffer to 3840x1080
[     9.565] (II) intel(0): switch to mode 1920x1080@60.0 on DP1-2 using pipe 1, position (1920, 0), rotation normal, reflection none
[    16.694] (II) intel(0): resizing framebuffer to 1920x2160
[    16.723] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 1080), rotation normal, reflection none
[    16.728] (II) intel(0): switch to mode 1920x1080@60.0 on DP1-2 using pipe 1, position (0, 0), rotation normal, reflection none

Ci-dessus, c'est la fin de ton fichier qui ne se termine pas correcmao(dit le sptéphanois). Je pense qu'il y a une incompatibilité avec les processeurs de la carte, car il y a différents essais de résolution, ou une mauvaise définition de résolution.

Donnes le retour de la commande :

xrandr

Et décris ton écran : marque, référence, pour connaître la compatibilité avec le driver.


Emachine el1200, Xubuntu 20.04 LTS
Traductions guides serveur & grub et liens utiles Classement CG
inxi -F sudo lshw dpkg -l

Hors ligne

#5 Le 25/08/2016, à 15:38

Zildjian

Re : Mauvais redimensionnement des fenetres - déplacement clic+souris

Merci pour ces explications!

Concernant les écrans secondaires que j'utilise :
Acer V243HQ au travail (celui qui était branché pour ces tests)
AOC 27" LED - e2770Sh à la maison

Je précise que le problème apparaît indépendamment de l'écran secondaire qui est branché.
De tête, je n'ai pas vu le problème lorsque j'utilise uniquement l'écran du portable mais je peut me tromper et comme c'est aléatoire, c'est difficile de se prononcer...

Sortie de xrandr :

Screen 0: minimum 8 x 8, current 1920 x 2160, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+1080 (normal left inverted right x axis y axis) 309mm x 173mm
   1920x1080     60.05*+  59.93  
   1680x1050     59.95    59.88  
   1600x1024     60.17  
   1400x1050     59.98  
   1600x900      60.00  
   1280x1024     60.02  
   1440x900      59.89  
   1280x960      60.00  
   1368x768      60.00  
   1360x768      59.80    59.96  
   1152x864      60.00  
   1280x720      60.00  
   1024x768      60.00  
   1024x576      60.00  
   960x540       60.00  
   800x600       60.32    56.25  
   864x486       60.00  
   640x480       59.94  
   720x405       60.00  
   640x360       60.00  
DP1 disconnected (normal left inverted right x axis y axis)
DP1-1 disconnected (normal left inverted right x axis y axis)
DP1-2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
   1920x1080     60.00*+
   1280x1024     60.02  
   1440x900      59.90  
   1280x800      59.91  
   1152x864      75.00  
   1024x768      70.07    60.00  
   800x600       60.32    56.25  
   640x480       66.67    60.00  
   720x400       70.08  
DP1-3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

HP EliteBook 840-G2 : Ubuntu 16.04.1 LTS Xenial Xerus
Processeur : Intel Core i5-5300U CPU @ 2.30GHz
Type OS : 64 bits
Carte graphique : Intel Corporation Broadwell-U Integrated Graphics (rev 09)

Hors ligne

#6 Le 25/08/2016, à 16:08

Pascaltech

Re : Mauvais redimensionnement des fenetres - déplacement clic+souris

Screen 0: minimum 8 x 8, current 1920 x 2160, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+1080 (normal left inverted right x axis y axis) 309mm x 173mm
   1920x1080     60.05*+  59.93  
DP1-2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
   1920x1080     60.00*+

Tes deux écrans sont l'un au-dessus de l'autre et non côte-à-côte(correction du 4/09/16) :
l'écran virtuel Screen 0 contient tes deux écrans :
1920x1080 et 1920x1080 = current 1920 x 2160
et non :
1920x1080 et 1920x1080 = current 3840 x 1080 dans le cas de deux écrans côte-à-côte
ce qui devrait donner :
eDP1 connected primary 1920x1080+1920+0
DP1-2 connected 1920x1080+0+0
Tu as :
eDP1 connected primary 1920x1080+0+1080
+0+1080 signifie qu'il est positionné en dessous de :
DP1-2 connected 1920x1080+0+0 : qui lui est la référence

Inverse la position des deux écrans par l'utilitaire d'affichage d'ubuntu, et s'il n'y a pas de résultat, je crois que tu as raison :

Packages installés qui (à mon humble avis) pourraient être en interaction avec mon problème :
CompizConfigSettingManager, Nemo.

Dernière modification par Pascaltech (Le 04/09/2016, à 12:05)


Emachine el1200, Xubuntu 20.04 LTS
Traductions guides serveur & grub et liens utiles Classement CG
inxi -F sudo lshw dpkg -l

Hors ligne

#7 Le 25/08/2016, à 16:26

Zildjian

Re : Mauvais redimensionnement des fenetres - déplacement clic+souris

Concernant la position des écrans, j'ai une configuration un peu particulière (qui en tout cas surprend plusieurs de mes collègues) :
Je me sert du PC portable (clavier et écran) avec une station d'accueil sur laquelle est branché l'écran secondaire que je met au dessus de l'écran natif du portable(plus ergonomique à mon avis)
Beaucoup de mes collègues sont surpris de cet agencement mais les quelques personnes qui l'ont essayées l'ont adoptées!
Et j'avais déjà essayé de modifier l'agencement pour voir s'il y avait un rapport mais apparemment non...


HP EliteBook 840-G2 : Ubuntu 16.04.1 LTS Xenial Xerus
Processeur : Intel Core i5-5300U CPU @ 2.30GHz
Type OS : 64 bits
Carte graphique : Intel Corporation Broadwell-U Integrated Graphics (rev 09)

Hors ligne

#8 Le 26/08/2016, à 01:59

Pascaltech

Re : Mauvais redimensionnement des fenetres - déplacement clic+souris

C'est un choix de travail qui t'appartient, mais est-il utile de définir l'écran de ton portable à droite de l'écran secondaire ?

Je pense que ton problème apparaît à la suite du branchement de ton écran AOC 27" LED - e2770Sh à la maison.
Car étant de résolution plus importante, je pense qu'il se superpose à ton écran primaire.

L'écran secondaire de dimension supposée :
DP1-1 connected 2560x1440+0+0
eDP1 connected primary 1920x1080+0+1080
(correction du 4/09/16) :
ce qui génère un croisement de définition en vertical entre 1440 et +0+1080
L'écran primaire se positionne à une cote correspondant à l'écran secondaire de départ DP1-2 1920x1080 alors que tu utilises un écran DP1-1 en position +0+0 d'une résolution plus grande : 2560x1440

Il serait intéressant que tu donnes le retour de la commande xrandr lorsque cet écran est connecté.

Dernière modification par Pascaltech (Le 04/09/2016, à 12:13)


Emachine el1200, Xubuntu 20.04 LTS
Traductions guides serveur & grub et liens utiles Classement CG
inxi -F sudo lshw dpkg -l

Hors ligne