Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 24/09/2016, à 13:27

Clhiver

[RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut à tous, Céline est de retour avec ses questions à la noix.
Je viens  d'acheter un portable ACER Aspire série V13. Je crois que la référence est V3 371 31 J3.
Stockage : Disque dur de 500 Go + SSHD de 8 Go + RAM de 4 Go
Windows 10 Famille est installé par défaut.
Je voudrais installer Xubuntu 14.04 avec une  partition "/" et une partition "home", à partir  d'une clé usb.

J'ai déjà effectué moulte installations manuelles de Xubuntu, mais sur des ordis équipés d'un disque dur.

Question : comment ça se passe lors de l'installation, au  niveau du partitionnement, par rapport à un disque dur avec SSHD (par rapport à un disuqe dur sans SSHD) ?

Merci pour vos réponses.

Dernière modification par Clhiver (Le 13/10/2016, à 08:20)


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#2 Le 24/09/2016, à 19:57

tarkan99

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut,

Une petite remarque : xubuntu 14.04 n'est supporté que jusque avril 2017.

16.04 serait plus judicieux.

SSHD , c'est quoi?


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#3 Le 25/09/2016, à 14:11

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut et merci pour ta réponse.
J'ai essayé Xubuntu 16.04, mais j'ai un faible pour la version 14.04.
C'est quoi SSHD ? J'ai posé la question au vendeur (Matériel.net) et j'ai pas très bien compris la réponse. C'est comme un SSD, mais ça n'est pas vraimment un...


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#4 Le 25/09/2016, à 14:15

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Disque dur traditionnel ou hybride ?

Je viens de jeter un coup d'Oeil sur le site Matériel.net à propos d'un disque SSHD de 1To : Pour un nouveau PC ou pour mettre à jour votre machine actuelle que choisir entre un disque dur traditionnel ou un SSHD (disque dur hybride) ? D'un côté le disque dur classique offre une capacité de stockage conséquente pour un prix très intéressant, de l'autre les SSD offrent des performances exceptionnelles mais avec une capacité de stockage limitée et des prix élevés au Go.
C'est à mi chemin entre ces deux produits que l'on retrouve les disques hybrides SSHD qui combinent les avantages des deux solutions précédentes. Le SSHD offre un démarrage ultra rapide de votre machine tout en conservant une capacité de stockage importante. Il faut aussi savoir que la fiabilité des SSHD est la même que celle des SSD ou disques durs classiques ! Alors foncez et passez au SSHD Seagate !


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#5 Le 26/09/2016, à 11:53

malbo

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Le nom du modèle de ton ordi est Acer Aspire V3-371-31J3 comme on peut voir sur cette page : http://www.materiel.net/ordinateur-port … 32376.html
Si on en croit le descriptif de cette page, il serait équipé d'un processeur Intel Core i3-5005U ; la partie graphique "Intel HD Graphics 5500" est intégrée sur la même puce que le processeur. Et puis il y aurait le SSHD...
Tu as écrit dans le post #3 : "J'ai essayé Xubuntu 16.04, mais j'ai un faible pour la version 14.04". Mais Xubuntu 14.04 a une fin d’assistance technique en avril 2017 (déjà signalé par tarkan99 dans le post #2) alors que Xubuntu 16.04 est maintenu jusqu'en avril 2019 (source). Entre 7 mois d'assistance et 2 ans et demie, moi je te conseille d'avoir un faible pour la version 16.04.
Quelque soit ton choix (14.04 ou 16.04), je te conseille la version 64 bits et je te recommande de faire un essai préalable en session live - ordi démarré sur une LiveUSB ou un LiveDVD de Ubuntu, choix Essayer Ubuntu - et si tout marche bien depuis la session live, de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse. On pourra ainsi vérifier quelques points importants :
- vérifier que ton SSHD est bien vu comme un simple disque dur conformément aux dires de BrunoGey dans ce post.
- vérifier que tu démarres bien en mode EFI sur ton support live d'installation (puisque Windows est préinstallé en mode EFI, il conviendra d'installer Xubuntu dans ce même mode)

Dernière modification par malbo (Le 26/09/2016, à 12:05)

Hors ligne

#6 Le 27/09/2016, à 10:42

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut et merci pour cette réponse très détaillée.
J'essaie dès ce week-end et je te tiens au courant.


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#7 Le 01/10/2016, à 15:43

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, j'ai donc essayé et échoué d'installer Xubuntu...

Tout d'abord, j'ai bien modifié l'ordre de démarrage en mettant USB HDD en premier, mais rien n'y fait : l'ordi redémarre sur le disque dur.

Ensuite, j'ai une question : est-ce que les options secure-boot et uefi sont importantes si on ne souhaite conserver que Xubuntu (=supprimer windows 10 préinstallé). ?

Merci pour vos réponses.

Dernière modification par Clhiver (Le 01/10/2016, à 16:28)


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#8 Le 01/10/2016, à 17:14

malbo

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Il faut prendre la version 64 bits de Xubuntu : je crains que tu aies réalisé ta LiveUSB avec la version 32 bits. Peux-tu indiquer le nom de l'ISO qui t'a servi pour faire la liveUSB Xubuntu ?

Hors ligne

#9 Le 02/10/2016, à 06:28

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, il s'agissait de l'iso xubuntu-1604-desktop-amd64.

J'ai une question : est-ce que les options secure-boot et uefi sont importantes si on ne souhaite avoir que Xubuntu (=supprimer windows 10 préinstallé) ?

Merci pour ton aide.


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#10 Le 02/10/2016, à 07:31

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, je me suis dit que ça venait peut-être de la clé. J'ai donc utilisé une vieille clé et l'installation semble s'être passé à merveille. Lors du partitionnement, un message m'a indiqué que je devais prévoir une partition efi d'au moins 40 Go.
J'ai donc partitionné de la manière suivante :
efi : 45 Mo
/ : 12 Go
swap : 4,5 Go
temp : 2 Go
home : tout le reste.

Le problème est que quand j'ai redémarré, j'ai eu droit à un écran noir avec le message "No bootable device". J'ai fait une grosse bêtise ?


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#11 Le 02/10/2016, à 07:40

malbo

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Non, pas de bêtise à priori. Pour voir ce qui se passe, je te prie de démarrer une session live sur ta LiveUSB (choix Essayer Ubuntu) et depuis cette session live, faire un Boot-Info. Tu donneras l'URL de ce Boot-Info dans ta réponse.

Hors ligne

#12 Le 02/10/2016, à 09:27

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, J'ai donc redémarré en live sur boot-repair et activé la réparation. Par contre, j'ai pas pu connecter mon ordi à internet. J'utilise donc mon autre ordi pour te contacter. J'ai le message "Boot successfully repaired.....You can now reboot your computer. Please, do not forget to make your BIOS boot on sda1/EFI/ubuntu/shimx64.efi". Comment fait-on pour faire booter sur ce fichier shimx64.efi sachant que je ne souhaite pas de dual-boot avec windows 10 car je ne souhaite qu'utiliser xubuntu ?


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#13 Le 02/10/2016, à 11:10

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, je viens de réinstaller xubuntu 16.04 (après suppresion de windows 10). Comme j'arrive pas à me connecter au wifi, j'ai fait une copie du fichier boot-repair.

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Nov2014]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/MokManager.efi /EFI/ubuntu/fwupx64.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda4: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20120131
    Boot sector info:  Syslinux looks at sector 1329386 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   976,773,167   976,773,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048        88,063        86,016 EFI System partition
/dev/sda2          88,064    23,525,375    23,437,312 Data partition (Linux)
/dev/sda3      23,525,376    31,727,615     8,202,240 Swap partition (Linux)
/dev/sda4      31,727,616    36,024,319     4,296,704 Data partition (Linux)
/dev/sda5      36,024,320   976,771,071   940,746,752 Data partition (Linux)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 4048 MB, 4048551936 bytes
54 heads, 9 sectors/track, 16270 cylinders, total 7907328 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *          2,048     7,907,327     7,905,280   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        F2E4-312F                              vfat       
/dev/sda2        ff6eb2de-b4c5-4601-8827-5bbecb439ccc   ext4       
/dev/sda3        7fa456ff-d58b-42d5-847d-29bc7382d8a1   swap       
/dev/sda4        fa478f2e-b524-40d3-ac64-cbfbeb28b1af   ext4       
/dev/sda5        6e1c31cb-d01e-4a54-ac2e-82d9c20dcd3e   ext4       
/dev/sdb1        7D2C-5C30                              vfat       
/dev/zram0       efb48ba3-ee86-44d6-8014-0abefcb24220   swap       
/dev/zram1       5e302a7c-9e8b-4cba-9ac9-eb9f27d8d0fe   swap       
/dev/zram2       d414303b-12dc-40bf-8943-923667fd4c7b   swap       
/dev/zram3       bd7d6763-d25f-451b-80c9-faf62c1cd3c2   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Oct  2 13:00 ata-TOSHIBA_MQ02ABF050H_46HRC87NT -> ../../sda
lrwxrwxrwx 1 root root 10 Oct  2 13:00 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct  2 13:00 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct  2 13:00 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Oct  2 13:00 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Oct  2 13:00 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Oct  2 13:00 usb-Generic_USB2.0-CRW_20100201396000000 -> ../../sdc
lrwxrwxrwx 1 root root  9 Oct  2 13:00 usb-JetFlash_Transcend_4GB_388UJXW39F08E768-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Oct  2 13:00 usb-JetFlash_Transcend_4GB_388UJXW39F08E768-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Oct  2 13:00 wwn-0x50000396f40045e9 -> ../../sda
lrwxrwxrwx 1 root root 10 Oct  2 13:00 wwn-0x50000396f40045e9-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct  2 13:00 wwn-0x50000396f40045e9-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct  2 13:00 wwn-0x50000396f40045e9-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Oct  2 13:00 wwn-0x50000396f40045e9-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Oct  2 13:00 wwn-0x50000396f40045e9-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  ff6eb2de-b4c5-4601-8827-5bbecb439ccc
else
  search --no-floppy --fs-uuid --set=root ff6eb2de-b4c5-4601-8827-5bbecb439ccc
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-ff6eb2de-b4c5-4601-8827-5bbecb439ccc' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  ff6eb2de-b4c5-4601-8827-5bbecb439ccc
	else
	  search --no-floppy --fs-uuid --set=root ff6eb2de-b4c5-4601-8827-5bbecb439ccc
	fi
	linux	/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=ff6eb2de-b4c5-4601-8827-5bbecb439ccc ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-21-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-ff6eb2de-b4c5-4601-8827-5bbecb439ccc' {
	menuentry 'Ubuntu, avec Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-ff6eb2de-b4c5-4601-8827-5bbecb439ccc' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  ff6eb2de-b4c5-4601-8827-5bbecb439ccc
		else
		  search --no-floppy --fs-uuid --set=root ff6eb2de-b4c5-4601-8827-5bbecb439ccc
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
		linux	/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=ff6eb2de-b4c5-4601-8827-5bbecb439ccc ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-init-upstart-ff6eb2de-b4c5-4601-8827-5bbecb439ccc' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  ff6eb2de-b4c5-4601-8827-5bbecb439ccc
		else
		  search --no-floppy --fs-uuid --set=root ff6eb2de-b4c5-4601-8827-5bbecb439ccc
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
		linux	/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=ff6eb2de-b4c5-4601-8827-5bbecb439ccc ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-ff6eb2de-b4c5-4601-8827-5bbecb439ccc' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  ff6eb2de-b4c5-4601-8827-5bbecb439ccc
		else
		  search --no-floppy --fs-uuid --set=root ff6eb2de-b4c5-4601-8827-5bbecb439ccc
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
		linux	/boot/vmlinuz-4.4.0-21-generic.efi.signed root=UUID=ff6eb2de-b4c5-4601-8827-5bbecb439ccc ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=ff6eb2de-b4c5-4601-8827-5bbecb439ccc /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=F2E4-312F  /boot/efi       vfat    umask=0077      0       1
# /home was on /dev/sda5 during installation
UUID=6e1c31cb-d01e-4a54-ac2e-82d9c20dcd3e /home           ext4    defaults        0       2
# /tmp was on /dev/sda4 during installation
UUID=fa478f2e-b524-40d3-ac64-cbfbeb28b1af /tmp            ext4    defaults        0       2
# swap was on /dev/sda3 during installation
UUID=7fa456ff-d58b-42d5-847d-29bc7382d8a1 none            swap    sw              0       0
--------------------------------------------------------------------------------

=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Boot-Repair-Disk session" {
	set gfxpayload=keep
	linux	/casper/vmlinuz.efi  file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

============================== sdb1/syslinux.cfg: ==============================

--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100

label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --

label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit 

label ubnentry1
menu label ^64bit session
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper  quiet splash --

label ubnentry2
menu label ^64bit session (failsafe)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper  noapic noapm nodma nomce nolapic nomodeset nosmp vga=normal --

label ubnentry3
menu label Boot-Repair-Disk session
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --

--------------------------------------------------------------------------------

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 menu.c32                           :  COM32R module (v4.xx)

========= Devices which don't seem to have a corresponding hard drive: =========

sdc 

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/2082/mounts) leaked on lvs invocation. Parent PID 10456: bash
File descriptor 63 (pipe:[27913]) leaked on lvs invocation. Parent PID 10456: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2016-10-02__13h00 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa14
File descriptor 9 (/proc/2082/mounts) leaked on lvs invocation. Parent PID 4685: /bin/sh
No volume groups found
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 29nov2014, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda2:Ubuntu 16.04 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="F2E4-312F" TYPE="vfat"
/dev/sda2: UUID="ff6eb2de-b4c5-4601-8827-5bbecb439ccc" TYPE="ext4"
/dev/sda3: UUID="7fa456ff-d58b-42d5-847d-29bc7382d8a1" TYPE="swap"
/dev/sda4: UUID="fa478f2e-b524-40d3-ac64-cbfbeb28b1af" TYPE="ext4"
/dev/sda5: UUID="6e1c31cb-d01e-4a54-ac2e-82d9c20dcd3e" TYPE="ext4"
/dev/sdb1: UUID="7D2C-5C30" TYPE="vfat"
/dev/zram0: UUID="efb48ba3-ee86-44d6-8014-0abefcb24220" TYPE="swap"
/dev/zram1: UUID="5e302a7c-9e8b-4cba-9ac9-eb9f27d8d0fe" TYPE="swap"
/dev/zram2: UUID="d414303b-12dc-40bf-8943-923667fd4c7b" TYPE="swap"
/dev/zram3: UUID="bd7d6763-d25f-451b-80c9-faf62c1cd3c2" TYPE="swap"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Apr 20 22:15 grub.d
total 76
-rwxr-xr-x 1 root root  9791 Apr 15 22:00 00_header
-rwxr-xr-x 1 root root  6258 Mar 15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 Apr 15 22:00 10_linux
-rwxr-xr-x 1 root root 11082 Apr 15 22:00 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apr 15 22:00 30_os-prober
-rwxr-xr-x 1 root root  1418 Apr 15 22:00 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Apr 15 22:00 40_custom
-rwxr-xr-x 1 root root   216 Apr 15 22:00 41_custom
-rw-r--r-- 1 root root   483 Apr 15 22:00 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=F2E4-312F   (sda1)

efibootmgr -v
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,2002,2003
Boot0000* USB HDD: JetFlashTranscend 4GB	ACPI(a0341d0,0)PCI(1d,0)USB(0,0)USB(0,0)HD(1,800,78a000,000b3686)RC
Boot0001* Unknown Device: 	HD(1,800,15000,56714c76-1124-4a82-8efe-d251f3f254eb)File(EFIubuntushimx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC
=================== UEFI/Legacy mode:
Unusual EFI: Please report this message to boot.repair@gmail.com
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda4	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda4.
sda5	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA TOSHIBA MQ02ABF0 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  45.1MB  44.0MB  fat32                 boot
2      45.1MB  12.0GB  12.0GB  ext4
3      12.0GB  16.2GB  4200MB  linux-swap(v1)
4      16.2GB  18.4GB  2200MB  ext4
5      18.4GB  500GB   482GB   ext4


Model: JetFlash Transcend 4GB (scsi)
Disk /dev/sdb: 4049MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      1049kB  4049MB  4048MB  primary  fat32        boot, lba



                                                                          
Error: /dev/zram0: unrecognised disk label


                                                                          
Error: /dev/zram1: unrecognised disk label


                                                                          
Error: /dev/zram2: unrecognised disk label


                                                                          
Error: /dev/zram3: unrecognised disk label

=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA TOSHIBA MQ02ABF0;
1:1049kB:45.1MB:44.0MB:fat32::boot;
2:45.1MB:12.0GB:12.0GB:ext4::;
3:12.0GB:16.2GB:4200MB:linux-swap(v1)::;
4:16.2GB:18.4GB:2200MB:ext4::;
5:18.4GB:500GB:482GB:ext4::;

BYT;
/dev/sdb:4049MB:scsi:512:512:msdos:JetFlash Transcend 4GB;
1:1049kB:4049MB:4048MB:fat32::boot, lba;


                                                                          
Error: /dev/zram0: unrecognised disk label


                                                                          
Error: /dev/zram1: unrecognised disk label


                                                                          
Error: /dev/zram2: unrecognised disk label


                                                                          
Error: /dev/zram3: unrecognised disk label


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=lubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
/dev/sda4 on /mnt/boot-sav/sda4 type ext4 (rw)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 rts51x0 sda sda1 sda2 sda3 sda4 sda5 sdb sdb1 sdc sg0 sg1 sg2 shm snapshot snd stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls /mnt/boot-sav/sda1/1:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 01 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 50 01 00 96 02 00 00  00 00 00 00 02 00 00 00  |.P..............|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 2f 31 e4 f2 4e  4f 20 4e 41 4d 45 20 20  |..)/1..NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.9G  6.2M  1.9G   1% /
udev           devtmpfs   1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs      387M  1.1M  386M   1% /run
/dev/sdb1      vfat       3.8G  642M  3.2G  17% /cdrom
/dev/loop0     squashfs   549M  549M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.9G  8.0K  1.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      1.9G     0  1.9G   0% /run/shm
none           tmpfs      100M   16K  100M   1% /run/user
/dev/sda1      vfat        42M  3.6M   38M   9% /mnt/boot-sav/sda1
/dev/sda2      ext4        11G  3.1G  7.3G  30% /mnt/boot-sav/sda2
/dev/sda4      ext4       2.0G  3.1M  1.9G   1% /mnt/boot-sav/sda4
/dev/sda5      ext4       442G   71M  419G   1% /mnt/boot-sav/sda5

=================== fdisk -l:

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xae0e1f84

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1   976773167   488386583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 4048 MB, 4048551936 bytes
54 heads, 9 sectors/track, 16270 cylinders, total 7907328 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000b3686

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *        2048     7907327     3952640    c  W95 FAT32 (LBA)




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!


=================== User settings
The settings chosen by the user will not act on the boot.

T'en penses quoi ?

Dernière modification par Clhiver (Le 02/10/2016, à 11:24)


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#14 Le 02/10/2016, à 12:24

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Super, en cherchant pas mal, j'ai ajouté un certain fichier shimx64 dans la liste des boots et maintenant j'ai bien xubuntu 16.04 qui se lance à l'allumage de l'ordi !!!!

Je vais faire un autre boot-repair et je te l'envoies.


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#15 Le 02/10/2016, à 14:43

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, finallement, je suis passé en mode legacy et c'est sans soucis. Encore merci pour ton aide.


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#16 Le 02/10/2016, à 17:00

malbo

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Je voudrais ajouter ton modèle d'ordi Acer Aspire V3-371-31J3 dans la Liste des portables « Acer »
Pour donner un exemple d’installation réussie de Ubuntu dans ce modèle, pourrais-tu faire un Boot-Info depuis une session de ton Ubuntu installé et donner l'URL du Boot-Info dans ta réponse ?

Hors ligne

#17 Le 04/10/2016, à 09:58

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

No problemo. Mais j'arrive pas à capter le wifi. J'ai justement posté une question à ce sujet. Dès que ma carte réseaux est fonctionnelle, je t'enverrais l'url du boot-info.


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#18 Le 09/10/2016, à 17:44

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, J'ai enfin pu connecter mon nouvel ordi à internet via un cable. J'ai réinstallé Xubuntu 16.04 en mode legacy et je me suis débarassé de windows 10. Je te donne le lien :
Boot-info


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#19 Le 10/10/2016, à 08:40

malbo

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Ton Boot-Info est là :

     

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048    23,437,594    23,435,547  83 Linux
/dev/sda2          23,439,358   976,771,071   953,331,714   5 Extended
/dev/sda5          23,439,360    32,227,327     8,787,968  82 Linux swap / Solaris
/dev/sda6          32,229,376    36,132,863     3,903,488  83 Linux
/dev/sda7          36,134,912   976,771,071   940,636,160  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        2cce294a-b5a8-4255-a43a-3f0bb06c4700   ext4       
/dev/sda5        cc044587-ad5c-4ba2-876b-7641a0bb0f32   swap       
/dev/sda6        c0b53cd9-dfd6-42eb-8ffc-d3f8c0e24df9   ext4       
/dev/sda7        79cf8b92-7ba8-4b45-8ff0-e8edd98c7d2d   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Oct  9 18:40 ata-TOSHIBA_MQ02ABF050H_46HRC87NT -> ../../sda
lrwxrwxrwx 1 root root 10 Oct  9 18:40 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct  9 18:40 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct  9 18:40 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct  9 18:40 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Oct  9 18:40 ata-TOSHIBA_MQ02ABF050H_46HRC87NT-part7 -> ../../sda7
lrwxrwxrwx 1 root root  9 Oct  9 18:40 wwn-0x50000396f40045e9 -> ../../sda
lrwxrwxrwx 1 root root 10 Oct  9 18:40 wwn-0x50000396f40045e9-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Oct  9 18:40 wwn-0x50000396f40045e9-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Oct  9 18:40 wwn-0x50000396f40045e9-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Oct  9 18:40 wwn-0x50000396f40045e9-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Oct  9 18:40 wwn-0x50000396f40045e9-part7 -> ../../sda7

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda6        /tmp                     ext4       (rw,relatime,data=ordered)
/dev/sda7        /home                    ext4       (rw,relatime,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
else
  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-2cce294a-b5a8-4255-a43a-3f0bb06c4700' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
	else
	  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
	fi
	linux	/boot/vmlinuz-4.4.0-38-generic root=UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-38-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-2cce294a-b5a8-4255-a43a-3f0bb06c4700' {
	menuentry 'Ubuntu, avec Linux 4.4.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-38-generic-advanced-2cce294a-b5a8-4255-a43a-3f0bb06c4700' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
		else
		  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
		fi
		echo	'Chargement de Linux 4.4.0-38-generic…'
		linux	/boot/vmlinuz-4.4.0-38-generic root=UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-38-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-38-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-38-generic-init-upstart-2cce294a-b5a8-4255-a43a-3f0bb06c4700' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
		else
		  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
		fi
		echo	'Chargement de Linux 4.4.0-38-generic…'
		linux	/boot/vmlinuz-4.4.0-38-generic root=UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-38-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-38-generic-recovery-2cce294a-b5a8-4255-a43a-3f0bb06c4700' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
		else
		  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
		fi
		echo	'Chargement de Linux 4.4.0-38-generic…'
		linux	/boot/vmlinuz-4.4.0-38-generic root=UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-38-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-advanced-2cce294a-b5a8-4255-a43a-3f0bb06c4700' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
		else
		  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
		linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-init-upstart-2cce294a-b5a8-4255-a43a-3f0bb06c4700' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
		else
		  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
		linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-21-generic-recovery-2cce294a-b5a8-4255-a43a-3f0bb06c4700' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
		else
		  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
		fi
		echo	'Chargement de Linux 4.4.0-21-generic…'
		linux	/boot/vmlinuz-4.4.0-21-generic root=UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-21-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
	else
	  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  2cce294a-b5a8-4255-a43a-3f0bb06c4700
	else
	  search --no-floppy --fs-uuid --set=root 2cce294a-b5a8-4255-a43a-3f0bb06c4700
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda7 during installation
UUID=79cf8b92-7ba8-4b45-8ff0-e8edd98c7d2d /home           ext4    defaults        0       2
# /tmp was on /dev/sda6 during installation
UUID=c0b53cd9-dfd6-42eb-8ffc-d3f8c0e24df9 /tmp            ext4    defaults        0       2
# swap was on /dev/sda5 during installation
UUID=cc044587-ad5c-4ba2-876b-7641a0bb0f32 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   4.342323303 = 4.662534144    boot/grub/grub.cfg                             1
   2.365707397 = 2.540158976    boot/grub/i386-pc/core.img                     1
   1.546569824 = 1.660616704    boot/vmlinuz-4.4.0-21-generic                  1
   4.948951721 = 5.313896448    boot/vmlinuz-4.4.0-38-generic                  1
   4.948951721 = 5.313896448    vmlinuz                                        1
   1.546569824 = 1.660616704    vmlinuz.old                                    1
   2.610347748 = 2.802839552    boot/initrd.img-4.4.0-21-generic               4
   5.329097748 = 5.722075136    boot/initrd.img-4.4.0-38-generic               2
   5.329097748 = 5.722075136    initrd.img                                     2
   2.610347748 = 2.802839552    initrd.img.old                                 4

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2

00000000  c6 36 c1 85 b4 9b 65 89  f1 6a ad 9e 23 8a 82 ce  |.6....e..j..#...|
00000010  b0 32 1f 98 64 44 31 80  08 b2 2d fc d5 30 ac 31  |.2..dD1...-..0.1|
00000020  a2 10 25 b0 74 9b d9 33  08 d2 57 3b c5 38 91 fa  |..%.t..3..W;.8..|
00000030  88 fc 70 26 9a a0 cd af  3e 82 3d 28 85 b8 5c 4e  |..p&....>.=(..\N|
00000040  56 da a2 71 a6 19 69 92  81 bf 79 9f bc ae df 7b  |V..q..i...y....{|
00000050  1a 6f dd 13 3d 7a ad 35  0d 62 d5 28 3c 6d 4c 43  |.o..=z.5.b.(<mLC|
00000060  05 f6 d1 9e 2c ec fd 60  52 a1 86 d7 93 29 85 e2  |....,..`R....)..|
00000070  48 ec 95 ba 23 9c 73 72  08 5d da ec ce ac e3 dd  |H...#.sr.]......|
00000080  82 be c1 bd 7d 2f 13 2d  43 b8 8e 66 a2 a4 e6 d9  |....}/.-C..f....|
00000090  8b 73 1a 03 d1 a7 07 63  df 45 d1 05 87 85 e4 34  |.s.....c.E.....4|
000000a0  69 29 80 87 8f a3 0a 61  12 ec a9 3b 3c d7 23 76  |i).....a...;<.#v|
000000b0  b2 56 fa 20 e1 06 5a 43  24 e1 45 38 27 a2 ce f7  |.V. ..ZC$.E8'...|
000000c0  5b ac 7c 5b 4b dc 92 05  c6 62 ae 10 3c af c5 81  |[.|[K....b..<...|
000000d0  6b bb 5e 7d 86 97 45 4f  7a 7b 1d bc f3 e8 1c 69  |k.^}..EOz{.....i|
000000e0  97 29 72 bd 3a 12 cc 93  ae 71 59 25 49 25 ed 8a  |.)r.:....qY%I%..|
000000f0  c2 07 b2 fd 20 27 45 25  15 85 85 ba aa 54 cb 14  |.... 'E%.....T..|
00000100  55 de de 39 e9 10 d1 ea  34 22 7e ec b2 1e 0b 3b  |U..9....4"~....;|
00000110  73 26 2e ea 21 0a f7 3b  43 d2 53 de 8b 9a 3b 97  |s&..!..;C.S...;.|
00000120  f9 ac 32 41 f1 3b 50 7b  ae 90 31 ac 1a 85 37 2e  |..2A.;P{..1...7.|
00000130  82 c9 76 fd 52 80 6c 34  d1 4a 04 79 57 97 35 9d  |..v.R.l4.J.yW.5.|
00000140  d3 2d 5d fa 36 be 40 03  d0 cf 97 25 32 b9 ff d3  |.-].6.@....%2...|
00000150  d0 da ce 55 73 3f bf 1e  fa 64 41 1f 1a f2 42 8c  |...Us?...dA...B.|
00000160  0b 8c 0e 4f 9a 52 54 13  58 32 32 06 4d be b3 0b  |...O.RT.X22.M...|
00000170  f8 0b 93 93 c2 97 9d c1  39 68 67 24 66 50 0f 24  |........9hg$fP.$|
00000180  74 55 2d 69 d3 65 b7 fa  f1 92 49 b0 21 6e ab 27  |tU-i.e....I.!n.'|
00000190  b2 75 2f 4f 71 63 b4 ee  5d 5e cd 53 11 f6 ed d2  |.u/Oqc..]^.S....|
000001a0  21 f3 ab a2 93 f1 3e dd  11 de 66 b0 53 0a fc 5a  |!.....>...f.S..Z|
000001b0  35 77 2c f6 d1 56 9d 11  6e 44 4f b7 12 70 00 fe  |5w,..V..nDO..p..|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 18 86 00 00 fe  |................|
000001d0  ff ff 05 fe ff ff 02 18  86 00 00 98 3b 00 00 00  |............;...|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200



ADDITIONAL INFORMATION :
=================== log of boot-info 2016-10-09__18h40 ===================
boot-info version : 4ppa38
boot-sav version : 4ppa38
glade2script version : 3.2.3~ppa1
boot-sav-extra version :
boot-info is executed in installed-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic root=UUID=2cce294a-b5a8-4255-a43a-3f0bb06c4700 ro quiet splash vt.handoff=7
Partition 2 does not start on physical sector boundary.

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.1 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="2cce294a-b5a8-4255-a43a-3f0bb06c4700" TYPE="ext4" PARTUUID="30f0b7ff-01"
/dev/sda5: UUID="cc044587-ad5c-4ba2-876b-7641a0bb0f32" TYPE="swap" PARTUUID="30f0b7ff-05"
/dev/sda6: UUID="c0b53cd9-dfd6-42eb-8ffc-d3f8c0e24df9" TYPE="ext4" PARTUUID="30f0b7ff-06"
/dev/sda7: UUID="79cf8b92-7ba8-4b45-8ff0-e8edd98c7d2d" TYPE="ext4" PARTUUID="30f0b7ff-07"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Partition 2 does not start on physical sector boundary.
Partition 2 does not start on physical sector boundary.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct.   9 14:48 grub.d
total 76
-rwxr-xr-x 1 root root  9791 avril 16 00:00 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 avril 16 00:00 10_linux
-rwxr-xr-x 1 root root 11082 avril 16 00:00 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 16 00:00 30_os-prober
-rwxr-xr-x 1 root root  1418 avril 16 00:00 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 16 00:00 40_custom
-rwxr-xr-x 1 root root   216 avril 16 00:00 41_custom
-rw-r--r-- 1 root root   483 avril 16 00:00 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
EFI in dmesg.
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	.
sda6	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/tmp.
sda7	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/home.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA TOSHIBA MQ02ABF0 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type      File system     Flags
1      1049kB  12.0GB  12.0GB  primary   ext4            boot
2      12.0GB  500GB   488GB   extended
5      12.0GB  16.5GB  4499MB  logical   linux-swap(v1)
6      16.5GB  18.5GB  1999MB  logical   ext4
7      18.5GB  500GB   482GB   logical   ext4

=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA TOSHIBA MQ02ABF0:;
1:1049kB:12.0GB:12.0GB:ext4::boot;
2:12.0GB:500GB:488GB:::;
5:12.0GB:16.5GB:4499MB:linux-swap(v1)::;
6:16.5GB:18.5GB:1999MB:ext4::;
7:18.5GB:500GB:482GB:ext4::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        465,8G
sda1  part ext4    11,2G
sda2  part            1K
sda5  part swap     4,2G
sda6  part ext4     1,9G
sda7  part ext4   448,5G

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sda2     1  0  0
sda5     1  0  0         [SWAP]
sda6     1  0  0         /tmp
sda7     1  0  0         /home


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1962404k,nr_inodes=490601,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=396484k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda7 on /home type ext4 (rw,relatime,data=ordered)
/dev/sda6 on /tmp type ext4 (rw,relatime,data=ordered)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=396484k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sda7 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vboxdrv vboxdrvu vboxnetctl vboxusb vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
Partition 2 does not start on physical sector boundary.

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     388M  6.4M  381M   2% /run
/dev/sda1      ext4       11G  5.0G  5.4G  48% /
tmpfs          tmpfs     1.9G  220K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sda7      ext4      442G  203G  217G  49% /home
/dev/sda6      ext4      1.9G  2.9M  1.7G   1% /tmp
tmpfs          tmpfs     388M   40K  388M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x30f0b7ff

Device     Boot    Start       End   Sectors   Size Id Type
/dev/sda1  *        2048  23437594  23435547  11.2G 83 Linux
/dev/sda2       23439358 976771071 953331714 454.6G  5 Extended
/dev/sda5       23439360  32227327   8787968   4.2G 82 Linux swap / Solaris
/dev/sda6       32229376  36132863   3903488   1.9G 83 Linux
/dev/sda7       36134912 976771071 940636160 448.5G 83 Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== User settings
The settings chosen by the user will not act on the boot.




paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (), using paste2

Je viens d'ajouter ton modèle Acer Aspire V3-371-31J3 dans la Liste des portables « Acer »
Pour mémoire, ce modèle (visible ici) est équipé d'un processeur Intel Core i3-5005U ; la partie graphique "Intel HD Graphics 5500" est intégrée sur la même puce que le processeur.
Le stockage que tu as décrit ainsi dans le post #1 : "Disque dur de 500 Go + SSHD de 8 Go" est vu par Ubuntu comme un disque dur de 500 Go. C'est ce que j'ai pu constater dans d'autres installations de Ubuntu : quand il y a un SSHD, il est vu comme un simple HDD.

Dernière modification par malbo (Le 10/10/2016, à 09:09)

Hors ligne

#20 Le 13/10/2016, à 07:48

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, J'aimerais apporter une précision : le wifi n'est pas fonctionnel. J'ai bien sûr demandé de l'aide sur le forum (voir mon message), je me suis également rendue à une réunion Ubuntu à Bordeaux, mais rien n'y a fait. Si  tu peux me donner un coup de main, tu es le bienvenue smile


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#21 Le 13/10/2016, à 08:02

malbo

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Clhiver a écrit :

le wifi n'est pas fonctionnel. J'ai bien sûr demandé de l'aide sur le forum (voir mon message)

Oui, j'ai vu ta discussion sur le sujet : https://forum.ubuntu-fr.org/viewtopic.php?id=1997463
Je ne suis pas spécialiste pour les pb de WiFi

EDIT : comme le souci avec la WiFi ne semble pas pouvoir se résoudre rapidement, je viens de le mentionner dans la ligne pour le modèle Aspire V3-371-31J3 de la Liste des portables « Acer »

Dernière modification par malbo (Le 13/10/2016, à 08:09)

Hors ligne

#22 Le 13/10/2016, à 08:05

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

No problemo. Faudrait peut-être indiquer dans ton tableau que le wifi n'est pas fonctionnel. Qu'en penses-tu ?


L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#23 Le 13/10/2016, à 08:09

malbo

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

C'est fait (j'ai édité mon post #21 entre-temps)

Dernière modification par malbo (Le 13/10/2016, à 08:10)

Hors ligne

#24 Le 13/10/2016, à 08:23

Clhiver

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Salut, changement de programme...finalement le wfi est fonctionnel !

Grâce à mon sauveur F50, il suffisait de taper deux misérables petites commandes :

rfkill list
sudo rfkill unblock wlan

L'informatique ça marche, sauf quand ça ne marche pas !

Hors ligne

#25 Le 13/10/2016, à 08:42

malbo

Re : [RESOLU] Installation de Xubuntu 16.04 sur ordinateur ACER récent

Tu me fais braire Clhiver. Je viens de prendre ça en compte dans la ligne du Aspire V3-371-31J3 de la Liste des portables « Acer » (mention "La WiFi ne fonctionne pas" supprimée)

Dernière modification par malbo (Le 13/10/2016, à 08:43)

Hors ligne