#1 Le 17/04/2017, à 17:29
- Pausemana
Installation Ubuntu - Asus rog gl552vw (Dual boot)
Bonjour à tous,
J'essaye en vain d'installer une version d'Ubuntu sur mon Asus Rog dernierement acquis. J'ai évidemment checké les différentes solution ici présentes ( il y'a meme un post qui traite du sujet pour le même ordinateur, mais pas en dual boot. J'ai tenté, ça n'a pas marché 
)
Je me heurte en général au soucis suivant : Apres etre entré en mode live, je lance l'installation, selectionne la partition etc; clic sur démarrer l'installation. & la, rien ne ce passe, jusqu'a l'appararition d'une fenetre d'erreur ..
Si quelqu'un aurait une solution & m'indiquer la marche à suivre, je suis preneur 
PS : j'ai tenté Ubuntu 16.04 / Ubuntu Gnome 16.04 / Ubuntu 17.04
Merci bien !
Hors ligne
#2 Le 17/04/2017, à 19:50
- lucmars
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
D'abord verifies l'integrité de tes images téléchargées (md5sum).
Au lieu de lancer l'installe sous le mode live, lance l'installe elle-même.
Il serait bon de connaître ta fenetre d'erreur, que dit-elle ?
Gaulois Matter !
Hors ligne
#3 Le 17/04/2017, à 22:29
- Pausemana
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
En lançant l'installe directement, j'aurai quand meme la possibilité de faire une partition Linux pour un dual boot ? ( Tous les tuto de dual boot indique de faire une live avant d'installer j'ai l'impression )
J'avoue ne pas avoir noté / screen le message d'erreur ! Pour l'instant je suis perdu, je ne sais pas quelle version de Linux installer & ni comment m'y prendre xD ( Apparement il y' aun soucis avec Nvidia / intel graphics qu'il faut resoudre via le grub )
PS : C'est mes premiers pas ( à quatre pattes pour l'instant ) sur Linux !
Hors ligne
#4 Le 18/04/2017, à 15:56
- malbo
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Bonjour,
Je te prie d'indiquer le nom complet du modèle de ton ordi (ce que j'appelle "complet", c'est par exemple "GL552VW-DM225T" comme tu peux voir sur cette page). Cela dit, s'il existe une page du Web qui montre ton modèle, donne le lien, ça me convient parfaitement.
Hors ligne
#5 Le 19/04/2017, à 02:25
- Pausemana
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Bonjour malbo
Modele : gl552vw-dm881t
Actuellement j'utilise ubuntu 16.04 (unity) sous VMware, mais dans un soucis de confort & puis pour commencer a me débarasser de Windows, j'aimerai le mettre en dual boot.
J'ai vu qu'il y'avait des commandes types nomodeset à mettre dans le grub par exemple, pour des modeles très proches. A quoi servent t'elles ? J'ai a l'heure d'aujourd'hui deja raté 3 installations en suivant différents tutos que j'ai pu trouver
Hors ligne
#6 Le 19/04/2017, à 06:37
- malbo
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
En général, le paramètre nomodeset permet d'obtenir un affichage correct pendant une session live (donc ça permet de tester et d'installer) et même juste après l'installation pour le premier démarrage sur le Ubuntu fraîchement installé. Mais on ne le garde pas (ce paramètre) après l'installation et on installe un pilote propriétaire qui va gérer l'affichage. Pour la session live, si tu en as besoin parce que ton affichage est merdique, tu peux utiliser les indications de ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p11528561
Je te prie de faire un Boot-Info (*) et de donner l'URL de ce Boot-Info dans ta réponse afin que je puisse avoir un "état des lieux".
(*) tu peux le faire depuis une session live de Ubuntu 16.04.2 64 bits de préférence : cette version est la plus convenable pour ton modèle à mon avis. Fichier à télécharger (1,4 Go) : ubuntu-16.04.2-desktop-amd64.iso ou bien depuis une session live de Ubuntu 17.4 64 bits si tu as une bonne raison de préférer cette toute dernière version de Ubuntu dont la date de fin de soutien est Janvier 2018 (alors que la 16.04.2 est soutenue jusqu'en Avril 2021)
Dernière modification par malbo (Le 19/04/2017, à 07:20)
Hors ligne
#7 Le 19/04/2017, à 22:26
- Pausemana
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Lien de mon boot-info : http://paste2.org/JtmjaAMA
Je tente au moment ou je vous écris une installation random, sans suivre de tutoriel, en utilisant juste le nomodeset pour la session live. Si j'ai bien compris, il ne devrait pas etre actif apres installation & redemarrage ? ( & je vous tiens au courant de ce qu'il se passe ! )
Edit : L'installation s'est passé sans soucis, par contre quand j'essaye de démarrer Ubuntu, l'ecran se fige sur une page violette completement vide
Edit2 : quand je lance le failsafeX, j'ai une erreur fatal Ecran non détécté 
Dernière modification par Pausemana (Le 19/04/2017, à 23:07)
Hors ligne
#8 Le 19/04/2017, à 23:16
- Pausemana
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
C'est encore moi !
Du coup j'ai tenté plusieurs manipulation sur le grub. Par exemple en allant dans le mode recovery, en faisant un failsafeX & en lançant depuis ce meme menu, je suis arrivé par magie sur le bureau fonctionnel ..
J'ai retenté un démarrage classique, toujours l'ecran violet !
Hors ligne
#9 Le 19/04/2017, à 23:21
- Laurent85
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Et avec l'option nomodeset ça marche pas ?
Si tu as un processeur Intel utilise l'option modprobe.blacklist=nouveau, vois ici la doc https://doc.ubuntu-fr.org/kernel#parametres_du_noyau
Dernière modification par Laurent85 (Le 19/04/2017, à 23:23)
Hors ligne
#10 Le 19/04/2017, à 23:52
- Pausemana
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
J'ai finalement réussi a lancer Ubuntu avec les bons parametres vidéos ! 
Du coup :
en allant dans le mode recovery j'ai reussi à boot une sorte de mode sans echec ( désolé si c'est un terme windows 
?
J'ai rentré les commandes qui suivent ( trouvés sur ce site https://jeremymdyson.wordpress.com/2016 … og-gl552v/ ) :
sudo apt-get update && sudo apt-get -y upgrade && sudo apt-get -y dist-upgrade
sudo apt-get purge nvidia*
sudo apt-get install nvidia-361-updates nvidia-prime
Reboot: sudo reboot
& puis bah .. voila x) so far so good !
Hors ligne
#11 Le 20/04/2017, à 00:13
- Laurent85
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Méfis toi des tutos de plus de quelques mois, ça change. Il fallait passer par l'application Pilotes additionnels, c'est le pilote 375 aujourd'hui. Mais puisque ça marche reste comme ça, changer de pilote en cours est souvent une source de problèmes.
Edition: la commande a dû installer le pilote 375 finalement, le nom du paquet 361 existe mais le système installe la dernière version 375 quand même. Donc tout va bien tu as de la chance 
Dernière modification par Laurent85 (Le 20/04/2017, à 00:16)
Hors ligne
#12 Le 20/04/2017, à 08:50
- malbo
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Bonjour,
Pour en avoir la confirmation, je te prie d'aller dans le gestionnaire de pilotes additionnels (dans ton cas, c'est dans "Paramètres système" → Logiciels & mises à jour → onglet "Pilotes additionnels") et de noter ce qui concerne le pilote NVIDIA qui doit être coché puisqu'il est utilisé. Si tu peux faire une capture de la fenêtre en question - avec l'outil "Capture d'écran" qui fait partie des applications installées de base - et la donner dans ta réponse en suivant les indications de 4.4 Insérer une image, ce serait utile. La fenêtre à capturer doit ressembler à ça.
Dernière modification par malbo (Le 20/04/2017, à 08:57)
Hors ligne
#13 Le 22/04/2017, à 20:19
- Pausemana
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
ça marche, je vous fourni ça sous peu ( J'ai actuellement fait l'acquisition d'un nouveau SSD, du coup je viens de formater pour refaire une installation propre )
Hors ligne
#14 Le 23/04/2017, à 00:51
- Pausemana
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Voilà
Par contre petit soucis depuis ma réinstallation, je n'arrive pas à faire fonctionner mes touches de luminosité.
J'avais réussi, en créant via le terminal un fichier dans jesaisplusquoi / X11 / jesaisplusquoi ( Merci la précision ). Mais enfaite ça n'avait pas marché & ma session n'afficher qu'un ecran noir au lancement d'ubuntu ( j'ai donc supprimé le fichier via le grub ), puis magie, mes touches marchaient .. x) Je sais pas ce que ça avait modifié, mais le fait de le créer puis de le supprimer avait mis en place un parametre qui l'avait fait fonctionner .. Est ce possible que ce sois justement l'utilisation de Nvidia binary server ? Ou l'autre ( Intel ) étant donné que j'ai l'impression que l'affichage passe par INTEL
PS : J'ai l'impression que Ubuntu s'est installé sur mon HDD encore une fois .. J'avais un peu peur de faire les partitions moi même, j'avais donc sélectionné installer a coté de windows. Ainsi Ubuntu possede une partition de 44 Giga. C'est moins que j'avais prévu sur mon SSD ( j'avais fait une partition spéciale sous windows pour l'y mettre ubuntu. ) Est t'il possible de modifier la taille assigné à ubuntu facilement ? Ou autant refaire une installation propre en choisissant moi meme les partitions d'ubuntu sur le SSD ?
Merci encore de l'aide de la communauté ça m'encourage vraiment à continuer de découvrir Linux !
Dernière modification par Pausemana (Le 23/04/2017, à 01:23)
Hors ligne
#15 Le 23/04/2017, à 07:03
- malbo
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
La vue que tu as collée dans ton post #14 indique que tu utilises actuellement le pilote libre Nouveau. Laurent85 qui s'y connaît mieux que moi saura te dire ce qu'il convient de faire (rester avec ce pilote libre ou passer au pilote propriétaire ?)
Hors ligne
#16 Le 23/04/2017, à 08:02
- Laurent85
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
L'image écran message #14 indique que le pilote Nvidia n'est pas utilisé. Installe-le en le sélectionnant > Appliquer les changements et redémarre.
Après génère un rapport bisnext et donne le lien.
Hors ligne
#17 Le 23/04/2017, à 14:26
- Pausemana
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
& voilà : http://paste.debian.net/928953/
J'ai du coup réussi la réinstallation sur SSD
Les touches luminosités FN F5 fn F6 ne marchent toujours pas
Merci !
Hors ligne
#18 Le 23/04/2017, à 15:27
- malbo
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Ton rapport bisnext est là :
bisnext report id f96ef
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-46-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: laptop System: ASUSTeK product: GL552VW v: 1.0
Mobo: ASUSTeK model: GL552VW v: 1.0
UEFI: American Megatrends v: GL552VW.218 date: 03/16/2016
Battery BAT0: charge: 47.1 Wh 100.1% condition: 47.1/48.2 Wh (98%)
volts: 14.4/14.4
model: ASUSTeK ASUS status: Discharging
CPU: Quad core Intel Core i7-6700HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 20736
clock speeds: min/max: 800/3500 MHz 1: 2999 MHz 2: 3265 MHz
3: 3281 MHz 4: 3103 MHz 5: 3343 MHz 6: 1514 MHz 7: 3070 MHz
8: 2398 MHz
Memory: Array-1 capacity: 64 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: 4 GB speed: 2400 MHz type: DDR4
manufacturer: SK Hynix part: HMA851S6AFR6N-UH
Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
Device-3: ChannelB-DIMM0 size: 4 GB speed: 2400 MHz type: DDR4
manufacturer: SK Hynix part: HMA851S6AFR6N-UH
Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
Graphics: Card-1: Intel Skylake Integrated Graphics
bus-ID: 00:02.0 chip-ID: 8086:191b
Card-2: NVIDIA GM107M [GeForce GTX 960M]
bus-ID: 01:00.0 chip-ID: 10de:139b
Display Server: X.Org 1.18.4 drivers: modesetting,nvidia
tty size: 1920x1080@60.05hz, 1920x1080@60.00hz
GLX Renderer: GeForce GTX 960M/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 375.39 Direct Rendering: Yes
Audio: Card Intel Sunrise Point-H HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3 chip-ID: 8086:a170
Sound: Advanced Linux Sound Architecture v: k4.8.0-46-generic
Network: Card-1: Intel Wireless 7265
driver: iwlwifi bus-ID: 02:00.0 chip-ID: 8086:095a
IF: wlp2s0 state: down mac: <filter>
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000
bus-ID: 03:00.1 chip-ID: 10ec:8168
IF: enp3s0f1 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1275.3GB (1.1% used)
ID-1: /dev/sda model: HGST_HTS721010A9 size: 1000.2GB
ID-2: /dev/sdb model: Crucial_CT275MX3 size: 275.1GB
Optical: /dev/sr0 model: TSST CDDVDW SU-228HB
rev: AS00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 41G used: 6.1G (16%) fs: ext4 dev: /dev/sdb5
label: N/A uuid: 955838e9-9d1e-408a-96fa-9084e499c474
ID-2: /boot/efi size: 95M used: 29M (30%) fs: vfat dev: /dev/sdb2
label: N/A uuid: 0235-8E19
ID-3: swap-1 size: 8.48GB used: 0.00GB (0%) fs: swap dev: /dev/sdb6
label: N/A uuid: d2a080cf-4a68-4e47-8eed-4a50797db6aa
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/sda1 size: 0.13G label: N/A uuid: N/A
ID-2: /dev/sda2 size: 1000.07G
fs: NTFS label: Principal uuid: 1ABAE53DBAE515D3
ID-3: /dev/sdb1 size: 0.47G
fs: NTFS label: Récupération uuid: 449E35519E353CAC
ID-4: /dev/sdb3 size: 0.02G label: N/A uuid: N/A
ID-5: /dev/sdb4 size: 222.01G
fs: NTFS label: Windows uuid: 14883AA0883A7FF2
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Active apt sources in file: /etc/apt/sources.list.d/google-chrome.list
deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
Active apt sources in file: /etc/apt/sources.list.d/numix-ubuntu-ppa-xenial.list
deb http://ppa.launchpad.net/numix/ppa/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 13.6% command: chrome pid: 10619 mem: 242.17MB (3.0%)
2: cpu: 9.8% command: chrome pid: 14607 mem: 140.28MB (1.7%)
3: cpu: 7.4% command: gnome-shell pid: 1771 mem: 190.13MB (2.4%)
4: cpu: 5.5% command: chrome pid: 12048 mem: 262.45MB (3.3%)
5: cpu: 4.6% command: Xorg pid: 1069 mem: 85.17MB (1.0%)
6: cpu: 3.7% command: chrome pid: 11700 mem: 155.11MB (1.9%)
7: cpu: 3.0% command: gnome-terminal-server pid: 14677 mem: 35.74MB (0.4%)
8: cpu: 1.7% command: gnome-software pid: 1857 mem: 98.80MB (1.2%)
9: cpu: 1.3% command: aptd (started by: python3) pid: 1853 mem: 100.39MB (1.2%)
10: cpu: 0.7% command: nautilus pid: 1859 mem: 58.09MB (0.7%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 262.45MB (3.3%) command: chrome pid: 12048 cpu: 5.5%
2: mem: 220.20MB (2.7%) command: chrome pid: 10619 cpu: 13.7%
3: mem: 190.13MB (2.4%) command: gnome-shell pid: 1771 cpu: 7.4%
4: mem: 155.11MB (1.9%) command: chrome pid: 11700 cpu: 3.7%
5: mem: 140.28MB (1.7%) command: chrome pid: 14607 cpu: 9.8%
6: mem: 100.39MB (1.2%) command: aptd (started by: python3) pid: 1853 cpu: 1.3%
7: mem: 98.80MB (1.2%) command: gnome-software pid: 1857 cpu: 1.7%
8: mem: 85.17MB (1.0%) command: Xorg pid: 1069 cpu: 4.6%
9: mem: 58.84MB (0.7%) command: evolution-calendar-factory pid: 1895 cpu: 0.1%
10: mem: 58.09MB (0.7%) command: nautilus pid: 1859 cpu: 0.7%
Info: Processes: 268 Uptime: 2 min Memory: 1448.7/7881.4MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0001
Timeout: 2 seconds
BootOrder: 0001,0000,0002
Boot0000* Windows Boot Manager HD(2,GPT,15e65b29-20db-4d17-9018-8a7d25cc5277,0xe1800,0x31800)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...C................
Boot0001* ubuntu HD(2,GPT,15e65b29-20db-4d17-9018-8a7d25cc5277,0xe1800,0x31800)/File(\EFI\UBUNTU\SHIMX64.EFI)
Boot0002* ubuntu HD(2,GPT,15e65b29-20db-4d17-9018-8a7d25cc5277,0xe1800,0x31800)/File(\EFI\UBUNTU\GRUBX64.EFI)..BO
vfat partitions details:
/dev/sdb2: UUID="0235-8E19" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="15e65b29-20db-4d17-9018-8a7d25cc5277"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
/dev/sdb2@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sdb2:
1650105fea8c992858d224d8f546b3d2 /EFI/Microsoft/Boot/memtest.efi
7e5846c5c982a2037ae885d96f1163d3 /EFI/Microsoft/Boot/bootmgfw.efi
e46ce79ec4662e061924f9a9e31ab4c3 /EFI/Microsoft/Boot/bootmgr.efi
7e5846c5c982a2037ae885d96f1163d3 /EFI/Boot/bootx64.efi
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
34a5c2687e10f4cad35391d68ff32a6c /EFI/ubuntu/grubx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
============================= Boot Info Summary ===============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
=> Windows 7/8/2012 is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/Microsoft/Boot/memtest.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi /EFI/Boot/bootx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/fbx64.efi
sdb3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdb4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sdb5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info =============================
Drive: sda _____________________________________________________________________
Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 4,294,967,295 4,294,967,295 ee GPT
/dev/sda1 ends after the last sector of /dev/sda
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 34 262,177 262,144 Microsoft Reserved Partition (Windows)
/dev/sda2 264,192 1,953,523,711 1,953,259,520 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 256,2 GiB, 275064201216 octets, 537234768 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 537,234,767 537,234,767 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 R 2,048 923,647 921,600 Windows Recovery Environment (Windows)
/dev/sdb2 923,648 1,126,399 202,752 EFI System partition
/dev/sdb3 1,126,400 1,159,167 32,768 Microsoft Reserved Partition (Windows)
/dev/sdb4 1,159,168 434,767,871 433,608,704 Data partition (Windows/Linux)
/dev/sdb5 434,767,872 520,667,135 85,899,264 Data partition (Linux)
/dev/sdb6 520,667,136 537,233,407 16,566,272 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1
/dev/sda2 1ABAE53DBAE515D3 ntfs Principal
/dev/sdb1 449E35519E353CAC ntfs Récupération
/dev/sdb2 0235-8E19 vfat
/dev/sdb3
/dev/sdb4 14883AA0883A7FF2 ntfs Windows
/dev/sdb5 955838e9-9d1e-408a-96fa-9084e499c474 ext4
/dev/sdb6 d2a080cf-4a68-4e47-8eed-4a50797db6aa swap
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 avril 23 14:23 ata-Crucial_CT275MX300SSD4_164814DCA988 -> ../../sdb
lrwxrwxrwx 1 root root 10 avril 23 14:23 ata-Crucial_CT275MX300SSD4_164814DCA988-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 avril 23 14:23 ata-Crucial_CT275MX300SSD4_164814DCA988-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 avril 23 14:23 ata-Crucial_CT275MX300SSD4_164814DCA988-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 avril 23 14:23 ata-Crucial_CT275MX300SSD4_164814DCA988-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 avril 23 14:23 ata-Crucial_CT275MX300SSD4_164814DCA988-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 avril 23 14:23 ata-Crucial_CT275MX300SSD4_164814DCA988-part6 -> ../../sdb6
lrwxrwxrwx 1 root root 9 avril 23 14:23 ata-HGST_HTS721010A9E630_JR1000D307DJBE -> ../../sda
lrwxrwxrwx 1 root root 10 avril 23 14:23 ata-HGST_HTS721010A9E630_JR1000D307DJBE-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 avril 23 14:23 ata-HGST_HTS721010A9E630_JR1000D307DJBE-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 avril 23 14:23 ata-TSSTcorp_CDDVDW_SU-228HB_S1B16YHH306QW5 -> ../../sr0
lrwxrwxrwx 1 root root 9 avril 23 14:23 wwn-0x5000cca8c8c35da0 -> ../../sda
lrwxrwxrwx 1 root root 10 avril 23 14:23 wwn-0x5000cca8c8c35da0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 avril 23 14:23 wwn-0x5000cca8c8c35da0-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 avril 23 14:23 wwn-0x500a075114dca988 -> ../../sdb
lrwxrwxrwx 1 root root 10 avril 23 14:23 wwn-0x500a075114dca988-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 avril 23 14:23 wwn-0x500a075114dca988-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 avril 23 14:23 wwn-0x500a075114dca988-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 avril 23 14:23 wwn-0x500a075114dca988-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 avril 23 14:23 wwn-0x500a075114dca988-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 avril 23 14:23 wwn-0x500a075114dca988-part6 -> ../../sdb6
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sdb5 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb2 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
/dev/sdb2 /boot/efi vfat 95M 29M 67M 30% -
/dev/sdb5 / ext4 41G 6.1G 33G 16% 10%
============================= Boot Files Content ==============================
__________________________ sdb2/EFI/ubuntu/grub.cfg: ___________________________
search.fs_uuid 955838e9-9d1e-408a-96fa-9084e499c474 root hd1,gpt5
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
___________________________ sdb5/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-955838e9-9d1e-408a-96fa-9084e499c474' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt5 --hint-efi=hd1,gpt5 --hint-baremetal=ahci1,gpt5 955838e9-9d1e-408a-96fa-9084e499c474
else
search --no-floppy --fs-uuid --set=root 955838e9-9d1e-408a-96fa-9084e499c474
fi
linux /boot/vmlinuz-4.8.0-46-generic.efi.signed root=UUID=955838e9-9d1e-408a-96fa-9084e499c474 ro acpi_osi=linux idle=nowait quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-46-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sdb2)' --class windows --class os $menuentry_id_option 'osprober-efi-0235-8E19' {
insmod part_gpt
insmod fat
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 0235-8E19
else
search --no-floppy --fs-uuid --set=root 0235-8E19
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sdb5/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb5 during installation
UUID=955838e9-9d1e-408a-96fa-9084e499c474 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb2 during installation
UUID=0235-8E19 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sdb6 during installation
UUID=d2a080cf-4a68-4e47-8eed-4a50797db6aa none swap sw 0 0
===============================================================================
System Info for The Running System
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/boot/vmlinuz-4.8.0-46-generic.efi.signed root=UUID=955838e9-9d1e-408a-96fa-9084e499c474 ro acpi_osi=linux idle=nowait quiet splash vt.handoff=7
_______________________________ Wireless Status _______________________________
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
3: asus-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0738:2026 Mad Catz, Inc.
Bus 001 Device 003: ID 0bda:57f5 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 0738:1705 Mad Catz, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 5: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
______________________________ Boot-up Statistics ______________________________
Startup finished in 8.170s (firmware) + 9.875s (loader) + 2.461s (kernel) + 12.609s (userspace) = 33.117s
blame, first 10:
systemd-rfkill.service 12.177s
gpu-manager.service 1.174s
plymouth-quit-wait.service 1.072s
dev-sdb5.device 411ms
ModemManager.service 175ms
networking.service 132ms
grub-common.service 128ms
apport.service 111ms
ondemand.service 103ms
speech-dispatcher.service 98ms
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @1.984s
2 lightdm.service @1.950s +30ms
3 systemd-user-sessions.service @744ms +89ms
4 basic.target @743ms
5 sockets.target @743ms
6 snapd.socket @740ms +790us
7 sysinit.target @738ms
8 apparmor.service @624ms +82ms
9 local-fs.target @622ms
10 boot-efi.mount @615ms +6ms
11 systemd-fsck@dev-disk-by\x2duuid-0235\x2d8E19.service @590ms +23ms
12 dev-disk-by\x2duuid-0235\x2d8E19.device @512ms
___________________________________ Modules Loaded ____________________________
Module Size Used by
ablk_helper 16384 1 aesni_intel
acpi_pad 24576 0
acpi_thermal_rel 16384 1 int3400_thermal
aesni_intel 167936 0
aes_x86_64 20480 1 aesni_intel
ahci 36864 3
arc4 16384 2
asus_nb_wmi 24576 0
asus_wireless 16384 0
asus_wmi 28672 1 asus_nb_wmi
autofs4 40960 2
bbswitch 16384 0
bluetooth 557056 13 btrtl,hci_uart,btintel,btqca,bnep,btbcm,btusb
bnep 20480 2
btbcm 16384 2 hci_uart,btusb
btintel 16384 2 hci_uart,btusb
btqca 16384 1 hci_uart
btrfs 1060864 0
btrtl 16384 1 btusb
btusb 45056 0
cfg80211 581632 3 iwlmvm,iwlwifi,mac80211
coretemp 16384 0
cpuid 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 ablk_helper,ghash_clmulni_intel,aesni_intel
drm 368640 6 i915,nvidia_drm,drm_kms_helper
drm_kms_helper 167936 2 i915,nvidia_drm
elan_i2c 36864 0
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hci_uart 98304 0
hfs 57344 0
hfsplus 106496 0
hid 122880 4 i2c_hid,hid_saitek,hid_generic,usbhid
hid_generic 16384 0
hid_saitek 16384 0
i2c_algo_bit 16384 1 i915
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_hid 20480 0
i915 1310720 3
idma64 20480 0
input_leds 16384 0
int3400_thermal 16384 0
int3402_thermal 16384 0
int3403_thermal 16384 0
int3406_thermal 16384 0
int340x_thermal_zone 16384 3 int3402_thermal,int3403_thermal,processor_thermal_device
intel_cstate 16384 0
intel_lpss 16384 2 intel_lpss_pci,intel_lpss_acpi
intel_lpss_acpi 16384 0
intel_lpss_pci 16384 0
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_rapl_perf 16384 0
intel_soc_dts_iosf 16384 1 processor_thermal_device
irqbypass 16384 1 kvm
iwlmvm 360448 0
iwlwifi 229376 1 iwlmvm
jfs 184320 0
joydev 20480 0
kvm 598016 1 kvm_intel
kvm_intel 192512 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lrw 16384 1 aesni_intel
mac80211 761856 1 iwlmvm
mac_hid 16384 0
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
memstick 20480 1 rtsx_pci_ms
mii 16384 1 r8169
minix 40960 0
msdos 20480 0
mxm_wmi 16384 0
nls_iso8859_1 16384 1
ntfs 102400 0
nvidia 12144640 71 nvidia_modeset,nvidia_uvm
nvidia_drm 49152 7
nvidia_modeset 790528 4 nvidia_drm
nvidia_uvm 647168 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
pinctrl_intel 20480 1 pinctrl_sunrisepoint
pinctrl_sunrisepoint 28672 0
ppdev 20480 0
processor_thermal_device 16384 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
rtsx_pci 57344 2 rtsx_pci_sdmmc,rtsx_pci_ms
rtsx_pci_ms 20480 0
rtsx_pci_sdmmc 24576 0
serio_raw 16384 0
shpchp 36864 0
snd 86016 17 snd_hda_intel,snd_hwdep,snd_hda_codec_conexant,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_pcm
snd_hda_codec 135168 4 snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_codec_generic
snd_hda_codec_conexant 24576 1
snd_hda_codec_generic 73728 1 snd_hda_codec_conexant
snd_hda_codec_hdmi 45056 1
snd_hda_core 86016 5 snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic
snd_hda_intel 36864 3
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 asus_wmi
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
tpm_crb 16384 0
ufs 73728 0
usbhid 53248 0
uvcvideo 90112 0
video 40960 3 asus_wmi,int3406_thermal,i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 180224 3 uvcvideo,videobuf2_core,videobuf2_v4l2
virt_dma 16384 1 idma64
wmi 16384 2 asus_wmi,mxm_wmi
x86_pkg_temp_thermal 16384 0
xfs 1048576 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
model : GM107M [GeForce GTX 960M]
vendor : NVIDIA Corporation
modalias : pci:v000010DEd0000139Bsv00001043sd00001C5Dbc03sc02i00
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-375 - distro non-free recommended
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr,us,fr
variant: latin9,,oss
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
None
________________________________ Broken Packages ______________________________
aptitude program not available on this system.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
exo-utils iucode-tool libexo-1-0 libexo-common libexo-helpers libgarcon-1-0
libgarcon-common libwnck-common libwnck22 libxfce4ui-1-0 libxfce4ui-common
libxfce4util-bin libxfce4util-common libxfce4util7 libxfconf-0-2 xfce4-panel
xfce4-power-manager-data xfconf
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
__________________ Configuration files of uninstalled packages: ________________
Package Version
intel-microcode 3.20151106.1
xfce4-power-manager 1.4.4-4ubuntu2
Use the following command to clean old configuration files:
sudo apt purge intel-microcode xfce4-power-manager
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.46.18
linux-headers-4.8.0-36 4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-headers-4.8.0-46 4.8.0-46.49~16.04.1
linux-headers-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.46.18
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-image-generic-hwe-16.04 4.8.0.46.18
linux-signed-generic-hwe-16.04 4.8.0.46.18
linux-signed-image-4.8.0-46-generic 4.8.0-46.49~16.04.1
linux-signed-image-generic-hwe-16.04 4.8.0.46.18
File list in /boot directory:
abi-4.8.0-36-generic
abi-4.8.0-46-generic
config-4.8.0-36-generic
config-4.8.0-46-generic
efi
grub
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-46-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-36-generic
System.map-4.8.0-46-generic
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-46-generic
vmlinuz-4.8.0-46-generic.efi.signed
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x77ec7e18 ACPI=0x76b0c000 ACPI 2.0=0x76b0c000 SMBIOS=0x778e1000 SMBIOS 3.0=0x778e0000
[ 0.000000] ACPI: UEFI 0x0000000076B3CD28 000042 (v01 00000000 00000000)
[ 0.186619] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.202106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.286205] ACPI : EC: GPE = 0x23, I/O: command/status = 0x66, data = 0x62
[ 0.842526] efifb: probing for efifb
[ 0.842534] efifb: framebuffer at 0xb0000000, using 1920k, total 1920k
[ 0.842535] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.842535] efifb: scrolling: redraw
[ 0.842536] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.842598] fb0: EFI VGA frame buffer device
[ 0.862437] EFI Variables Facility v0.08 2004-May-17
[ 0.954805] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 0.976548] fb: switching to inteldrmfb from EFI VGA
[ 1.288292] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.288313] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.291908] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.665341] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 2.723625] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 2.840945] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[ 2.840954] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[ 2.890785] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 2.890790] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[ 2.890794] pcieport 0000:00:1c.0: device [8086:a112] error status/mask=00000001/00002000
[ 2.890796] pcieport 0000:00:1c.0: [ 0] Receiver Error (First)
[ 2.906690] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 2.906753] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 2.906793] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 2.906831] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 2.906867] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 2.906923] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 2.906961] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 2.959367] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 3.159356] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 3.167268] audit: type=1400 audit(1492950182.775:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=800 comm="apparmor_parser"
[ 3.167273] audit: type=1400 audit(1492950182.775:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=800 comm="apparmor_parser"
[ 3.168575] audit: type=1400 audit(1492950182.775:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=802 comm="apparmor_parser"
[ 3.169767] audit: type=1400 audit(1492950182.779:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=804 comm="apparmor_parser"
[ 3.170486] audit: type=1400 audit(1492950182.779:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=796 comm="apparmor_parser"
[ 3.170489] audit: type=1400 audit(1492950182.779:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=796 comm="apparmor_parser"
[ 3.170492] audit: type=1400 audit(1492950182.779:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=796 comm="apparmor_parser"
[ 3.170494] audit: type=1400 audit(1492950182.779:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=796 comm="apparmor_parser"
[ 3.171536] audit: type=1400 audit(1492950182.779:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=803 comm="apparmor_parser"
[ 3.433265] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 3.433270] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[ 3.433272] pcieport 0000:00:1c.0: device [8086:a112] error status/mask=00000001/00002000
[ 3.433274] pcieport 0000:00:1c.0: [ 0] Receiver Error (First)
[ 3.676912] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 3.676917] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[ 3.676919] pcieport 0000:00:1c.0: device [8086:a112] error status/mask=00000001/00002000
[ 3.676921] pcieport 0000:00:1c.0: [ 0] Receiver Error
[ 4.396020] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.584056] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.584094] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.584116] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.584135] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.584155] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.584187] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.584206] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.587230] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.969917] Bluetooth: hci0 command 0xfc8e tx timeout
[ 7.134873] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 7.134878] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[ 7.134881] pcieport 0000:00:1c.0: device [8086:a112] error status/mask=00000001/00002000
[ 7.134882] pcieport 0000:00:1c.0: [ 0] Receiver Error (First)
[ 15.050411] Bluetooth: hci0 command 0xfc11 tx timeout
[ 135.968202] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 135.968208] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[ 135.968212] pcieport 0000:00:1c.0: device [8086:a112] error status/mask=00000001/00002000
[ 135.968214] pcieport 0000:00:1c.0: [ 0] Receiver Error (First)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Mad Catz Mad Catz R.A.T.5 Mouse id=11 [slave pointer (2)]
⎜ ↳ Elan Touchpad id=15 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Asus Wireless Radio Control id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Video Bus id=9 [slave keyboard (3)]
↳ Sleep Button id=10 [slave keyboard (3)]
↳ USB2.0 HD UVC WebCam id=12 [slave keyboard (3)]
↳ Madcatz Mad Catz V.5 Keyboard id=13 [slave keyboard (3)]
↳ Madcatz Mad Catz V.5 Keyboard id=14 [slave keyboard (3)]
↳ Asus WMI hotkeys id=16 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=17 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 16384 x 16384
eDP-1-1 connected primary 1920x1080+0+0 344mm x 193mm
1920x1080 60.05*+ 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1280x1024 60.02
1440x900 59.89
1280x960 60.00
1360x768 59.80 59.96
1152x864 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
DP-1-1 disconnected
HDMI-1-1 disconnected
HDMI-1-2 connected 1920x1080+1920+0 531mm x 299mm
1920x1080 60.00*+ 50.00 59.94 59.99
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 59.90
1280x960 60.00
1366x768 59.79
1152x864 75.00
1280x720 60.00 50.00 59.94
1024x768 75.03 70.07 60.00
832x624 74.55
800x600 72.19 75.00 60.32 56.25
720x576 50.00
720x480 60.00 59.94
640x480 75.00 72.81 66.67 60.00 59.94
720x400 70.08
DP-1-2 disconnected
HDMI-1-3 disconnected
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.466] (**) |-->Screen "nvidia" (0)
[ 4.466] (**) | |-->Monitor "<default monitor>"
[ 4.467] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 4.487] (--) PCI:*(0:0:2:0) 8086:191b:1043:1c5d rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 4.487] (--) PCI: (0:1:0:0) 10de:139b:1043:1c5d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4.487] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 4.487] (II) LoadModule: "glx"
[ 4.488] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 4.538] (II) LoadModule: "nvidia"
[ 4.538] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 4.543] (II) LoadModule: "modesetting"
[ 4.544] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.545] (II) Loading sub module "fb"
[ 4.545] (II) LoadModule: "fb"
[ 4.545] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.546] (II) Loading sub module "wfb"
[ 4.546] (II) LoadModule: "wfb"
[ 4.546] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4.547] (II) Loading sub module "ramdac"
[ 4.547] (II) LoadModule: "ramdac"
[ 4.566] (II) NVIDIA(0): Creating default Display subsection in Screen section
[ 4.767] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 4.767] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 4.767] (II) modeset(G0): Output eDP-1-1 has no monitor section
[ 4.767] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 4.990] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 5.017] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 5.018] (II) modeset(G0): Output DP-1-2 has no monitor section
[ 5.243] (II) modeset(G0): Output HDMI-1-3 has no monitor section
[ 5.497] (II) modeset(G0): Monitor name: VK248
[ 5.738] (II) Loading sub module "fb"
[ 5.738] (II) LoadModule: "fb"
[ 5.739] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.739] (II) Loading sub module "shadow"
[ 5.739] (II) LoadModule: "shadow"
[ 5.739] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 5.774] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[ 5.774] (WW) modeset(G0): Option "IgnoreDisplayDevices" is not used
[ 6.076] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 6.079] (II) Loading sub module "dri2"
[ 6.079] (II) LoadModule: "dri2"
[ 6.125] (II) LoadModule: "evdev"
[ 6.125] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.198] (**) Elan Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 6.198] (II) LoadModule: "synaptics"
[ 6.198] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-46-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-46-generic/updates/dkms
Found nvidia module: nvidia_375_modeset.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 8086:191b
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:139b
BusID "PCI:1@0:0:0"
Is boot vga? no
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card1", driven by "i915"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Found "/dev/dri/card1", driven by "i915"
output 0:
card1-eDP-1
output 1:
card1-HDMI-A-2
Number of connected outputs for /dev/dri/card1: 2
Does it require offloading? yes
last cards number = 2
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-375/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/nvidia-375/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? yes
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? no
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? yes
Is prime egl available? no
Intel IGP detected
Intel hybrid system
Nvidia driver version 375.39 detected
/sys/class/dmi/id/product_version="1.0"
/sys/class/dmi/id/product_name="GL552VW"
1st try: bbswitch without quirks
Loading bbswitch with "load_state=-1 unload_state=1" parameters
intel_matches: 1, nvidia_matches: 1, intel_set: 1, nvidia_set: 1 x_options_matches: 4, accel_method_matches: 1
No need to modify xorg.conf. Path: /etc/X11/xorg.conf
No need to change the current bbswitch status
============================ Disks SMART attributes ===========================
### ATA disks: sda sdb
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-46-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HGST Travelstar 7K1000
Device Model: HGST HTS721010A9E630
LU WWN Device Id: 5 000cca 8c8c35da0
Firmware Version: JB0OA3J0
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Apr 23 14:25:25 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0
2 Throughput_Performance P-S--- 100 100 040 - 0
3 Spin_Up_Time POS--- 125 125 033 - 2
4 Start_Stop_Count -O--C- 100 100 000 - 173
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 040 - 0
9 Power_On_Hours -O--C- 100 100 000 - 89
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 146
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 52
193 Load_Cycle_Count -O--C- 100 100 000 - 1148
194 Temperature_Celsius -O---- 214 214 000 - 28 (Min/Max 20/46)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
223 Load_Retry_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors Logged
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-46-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Crucial_CT275MX300SSD4
LU WWN Device Id: 5 00a075 114dca988
Firmware Version: M0CR031
User Capacity: 275 064 201 216 bytes [275 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: < 1.8 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Apr 23 14:25:25 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 14
12 Power_Cycle_Count -O--CK 100 100 000 - 39
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
173 Unknown_Attribute -O--CK 100 100 000 - 1
174 Unknown_Attribute -O--CK 100 100 000 - 18
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 055 045 000 - 45 (Min/Max 21/55)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
202 Unknown_SSD_Attribute ----CK 100 100 001 - 0
206 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
246 Unknown_Attribute -O--CK 100 100 000 - 403153449
247 Unknown_Attribute -O--CK 100 100 000 - 12619801
248 Unknown_Attribute -O--CK 100 100 000 - 2505636
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 000 000 000 - 1242
210 Unknown_Attribute -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
No Errors LoggedHors ligne
#19 Le 23/04/2017, à 17:54
- Laurent85
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Le pilote Nvidia de la carte graphique est actif :
GLX Renderer: GeForce GTX 960M/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 375.39 Direct Rendering: YesTu peux changer de carte graphique avec Nvidia settings en sélectionnant PRIME Profiles si besoin, pour sélectionner la puce graphique Intel intégrée au processeur.
L'installation s'est bien effectuée dans le ssd partitions sdb5 et sdb6.
Concernant les touches de fonctions c'est un problème commun lié au bios du pc non compatible à 100 % avec Linux. Il y a peut-être des paramètres à ajouter au noyau à tester, fais des recherches dans ce sens.
Dernière modification par Laurent85 (Le 23/04/2017, à 17:55)
Hors ligne
#20 Le 25/04/2017, à 08:21
- malbo
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
Bonjour,
Je viens d'ajouter le modèle GL552VW-DM881T dans la Liste des portables « Asus ». Pour mémoire, ce modèle - visible sur cette page - est équipé d'un processeur Intel Core i7-6700HQ et d'une carte graphique dédiée NVIDIA GeForce GTX960M
Si tu as pu résoudre tes derniers soucis (touches luminosités : post #17), je te prie de procéder comme suit pour fermer la présente discussion :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :
[Résolu] Installation Ubuntu - Asus rog gl552vw (Dual boot)Dernière modification par malbo (Le 25/04/2017, à 08:29)
Hors ligne
#21 Le 30/04/2018, à 13:04
- christopheab
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
bonjour,
j'ouvre ce forum de nouveau car j'ai moi aussi ce pc portable GL552V
j'ai réussi à tout bien installer en partant de Ubuntu Studio LTS version 14.04 et ensuite j'ai fait la mise à jour vers la 16.04 toujours en LTS
j'ai eu quelques soucis avec le kernel de la VirtualBox et aussi le ventilo mais là cela semble aller
j'ai encore la touche Fn pour la luminosité qui ne fonctionne pas ...
cela dit y'a un "truc bizarre" qui me chifonne ...
lorsque je démarre le pc, il part super vite en 8 secondes depuis le SSD, mais après une pause de 1 mn environ
vous voyez ?
allumage du PC, écran ASUS
pause de 1 mn, écran noir total, rien de bouge
tout d'un coup, réveil, les voyants DD cligontent
et là le PC démarre vraiment en 8 secondes sur le SSD
le bios est à jour, l'UEIF est Off, le secure boot est off ...
qui a une idée ?
c'est d'autant plus bizarre que je lui installé Windows 10 juste avant et je n'avais pas ce problème ...
je ne suis pas en dual boot, il n'y a que Ubuntu Studio, Win 10 a été supprimé ...
Hors ligne
#22 Le 30/04/2018, à 13:51
- malbo
Re : Installation Ubuntu - Asus rog gl552vw (Dual boot)
@christopheab : ton souci étant différent de celui de Pausemana, je te prie de créer une nouvelle discussion pour ton cas personnel en suivant les indications du paragraphe 4.1 Initier une nouvelle discussion du doc "Aide à l'utilisation du forum Ubuntu‑FR"
Hors ligne