Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 23/05/2017, à 15:36

ornitho81

[Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Bonjour,

J'ai installé UBUNTU 16-04 64 bits sur un de mes portables et cela tout de suite fonctionné et j'en suis trés content.

Cependant, j'ai voulu installé une version antérieur sur un autre portable (fiche technique   http://www.ldlc.com/fiche/PB00067459.html   )
J'ai fait la même manip que pour le 1er mais je n'arrive pas à le faire rebooter sur la galette.
J'ai essayé la version 14-04 32 bits et la version 12-04 32bits.
Mais rien à faire même en allant dans le bios et en mettant first boot le lecteur,cela ne fonctionne pas.

Quelqu'un peut être saurait il me dépanner ?

Merci d'avance.

Dernière modification par ornitho81 (Le 26/05/2017, à 11:18)

Hors ligne

#2 Le 23/05/2017, à 15:45

nam1962

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Le lecteur CD est il encore bon ? est-il compatible dvd ?


[ Modéré ]

Hors ligne

#3 Le 23/05/2017, à 15:46

Roschan

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Pourquoi vouloir installer des versions anciennes voire obsolètes ? Elle est pas assez cool la 16.04 ?

Je ne sais pas comment tu as fait ta clé bootable, mais avec un ordi de 2008, ya pas d'EFI donc la manière de faire la clé diffère un peu (avec Rufus par exemple les options à choisir ne sont pas du tout les mêmes)

Hors ligne

#4 Le 23/05/2017, à 15:49

nam1962

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

+1, j'avais mal lu (par contre tester une Xubuntu 32 bits 16.04.1 vu la RAM : http://ftp.free.fr/mirrors/ftp.xubuntu. … p-i386.iso )


[ Modéré ]

Hors ligne

#5 Le 24/05/2017, à 06:23

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Ok trés bien cela fonctionne merci ...mauvais telechargement au départ...

Hors ligne

#6 Le 24/05/2017, à 06:49

malbo

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

C'est parfait. Mais c'est quelle version que tu as installée finalement ?

Dernière modification par malbo (Le 24/05/2017, à 06:49)

Hors ligne

#7 Le 24/05/2017, à 07:01

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

la même que sur mon autre portable plus récent UBUNTU 16.04.2 LTS

Hors ligne

#8 Le 24/05/2017, à 09:25

malbo

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Je souhaiterais ajouter ton modèle d'ordi MSI VR601-046 dans la Liste des portables « MSI ». Je te prie de faire un rapport Bisnext depuis une session de ton Ubuntu installé afin qu'on puisse voir les infos utiles sur ton install.

Dernière modification par malbo (Le 24/05/2017, à 09:28)

Hors ligne

#9 Le 24/05/2017, à 10:49

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Hors ligne

#10 Le 24/05/2017, à 12:30

malbo

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Ton rapport Bisnext est là :

Posting 937697 from bn-64a37 posted at 2017-05-24 09:34:49 expires: 2017-06-23 09:34:49

May 24, 2017, bisnext report id 64a37

                                 bisnext 0.02


============================ Hardware and System Summary ======================

System:    Kernel: 4.8.0-52-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine:   Device: laptop System: Micro-Star product: MSI Notebook VR601 v: Ver 1.000
           Mobo: MSI model: MS-163C v: Ver 1.000
           BIOS: American Megatrends v: A163CIMS V1.58 date: 11/13/2007
Battery    BAT1: charge: 41.0 Wh 100.0% condition: 41.0/44.0 Wh (93%)
           volts: 12.5/11.1
           model: MSI MS-1637 status: Full
CPU:       Dual core Intel Pentium Dual T2330 (-MCP-) cache: 1024 KB
           flags: (lm nx sse sse2 sse3 ssse3) bmips: 6384
           clock speeds: min/max: 800/1600 MHz 1: 1067 MHz 2: 1333 MHz
Memory:    Array-1 capacity: 8 GB devices: 2 EC: None max module size: 4 GB
           Device-1: DIMM0 size: 1 GB (Double-bank) speed: N/A type: DDR2
           manufacturer: N/A part: N/A
           Device-2: DIMM1 size: No Module Installed type: N/A
           Device-3: DIMM2 size: 1 GB (Double-bank) speed: N/A type: DDR2
           manufacturer: N/A part: N/A
Graphics:  Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
           bus-ID: 00:02.0 chip-ID: 8086:2a02
           Display Server: X.Org 1.18.4 drivers: modesetting (unloaded: fbdev,vesa)
           tty size: 1280x800@59.91hz
           GLX Renderer: Mesa DRI Intel 965GM
           GLX Version: 2.1 Mesa 12.0.6 Direct Rendering: Yes
Audio:     Card Intel 82801H (ICH8 Family) HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:284b
           Sound: Advanced Linux Sound Architecture v: k4.8.0-52-generic
Network:   Card-1: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express)
           driver: ath5k bus-ID: 03:00.0 chip-ID: 168c:001c
           IF: wlp3s0 state: up mac: <filter>
           Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e800
           bus-ID: 04:00.0 chip-ID: 10ec:8168
           IF: enp4s0 state: down mac: <filter>
Drives:    HDD Total Size: 2160.4GB (40.6% used)
           ID-1: /dev/sda model: WDC_WD1600BEVT size: 160.0GB
          
           ID-2: USB /dev/sdb model: HD204UI size: 2000.4GB
          
           Optical: /dev/sr0 model: HL-DT-ST DVDRAM GSA-T20N
           rev: WA03 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 24x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 145G used: 5.8G (5%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: 380ac54c-1453-4a38-85ae-3f2079c11ea2
           ID-2: /media/ornitho/2tera de seb1 size: 1.9T used: 810G (44%) fs: fuseblk dev: /dev/sdb1
           label: 2tera de seb uuid: 8472353B72353372
           ID-3: swap-1 size: 2.14GB used: 0.01GB (0%) fs: swap dev: /dev/sda5
           label: N/A uuid: 58614539-d31a-4e7f-b437-80d3bb951bc7
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   None detected - is lm-sensors installed and configured?
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial main restricted
           deb-src http://mirror.vorboss.net/ubuntu-archive/ xenial restricted multiverse universe main
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial-updates main restricted
           deb-src http://mirror.vorboss.net/ubuntu-archive/ xenial-updates restricted multiverse universe main
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial universe
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial-updates universe
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial multiverse
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial-updates multiverse
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial-backports main restricted universe multiverse
           deb-src http://mirror.vorboss.net/ubuntu-archive/ xenial-backports main restricted universe multiverse
           deb http://archive.canonical.com/ubuntu xenial partner
           deb-src http://archive.canonical.com/ubuntu xenial partner
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial-security main restricted
           deb-src http://mirror.vorboss.net/ubuntu-archive/ xenial-security restricted multiverse universe main
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial-security universe
           deb http://mirror.vorboss.net/ubuntu-archive/ xenial-security multiverse
           Active apt sources in file: /etc/apt/sources.list.d/appgrid-stable-xenial.list
           deb http://ppa.launchpad.net/appgrid/stable/ubuntu xenial main
           Active apt sources in file: /etc/apt/sources.list.d/mc3man-ubuntu-gstffmpeg-keep-xenial.list
           deb http://ppa.launchpad.net/mc3man/gstffmpeg-keep/ubuntu xenial main
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 21.5% command: thunderbird pid: 2232 mem: 222.54MB (11.1%)
           2: cpu: 19.8% command: firefox pid: 2160 mem: 243.03MB (12.2%)
           3: cpu: 8.6% command: compiz pid: 1422 mem: 127.72MB (6.4%)
           4: cpu: 5.1% command: Xorg pid: 920 mem: 64.43MB (3.2%)
           5: cpu: 2.0% command: gnome-software pid: 1652 mem: 86.46MB (4.3%)
           6: cpu: 1.4% command: gnome-terminal-server pid: 2320 mem: 32.91MB (1.6%)
           7: cpu: 0.7% command: init pid: 1 mem: 5.66MB (0.2%)
           8: cpu: 0.5% command: bash pid: 4614 mem: 4.49MB (0.2%)
           9: cpu: 0.5% command: fwupd pid: 1776 mem: 34.67MB (1.7%)
           10: cpu: 0.4% command: nautilus pid: 1639 mem: 41.81MB (2.0%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 243.03MB (12.2%) command: firefox pid: 2160 cpu: 19.8%
           2: mem: 222.54MB (11.1%) command: thunderbird pid: 2232 cpu: 21.5%
           3: mem: 127.72MB (6.4%) command: compiz pid: 1422 cpu: 8.6%
           4: mem: 93.72MB (4.7%) command: signon-ui pid: 1934 cpu: 0.2%
           5: mem: 86.46MB (4.3%) command: gnome-software pid: 1652 cpu: 2.0%
           6: mem: 64.43MB (3.2%) command: Xorg pid: 920 cpu: 5.1%
           7: mem: 58.80MB (2.9%) command: evolution-calendar-factory pid: 1632 cpu: 0.1%
           8: mem: 50.14MB (2.5%) command: evolution-calendar-factory-subprocess pid: 1784 cpu: 0.0%
           9: mem: 49.23MB (2.4%) command: evolution-calendar-factory-subprocess pid: 1809 cpu: 0.0%
           10: mem: 43.35MB (2.1%) command: c:\TeamViewer\TeamViewer.exe (started by: c:\TeamViewer\TeamViewer.exe) pid: 1423 cpu: 0.3%
Info:      Processes: 221 Uptime: 5 min Memory: 1100.7/1991.5MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.8


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.


__________________________________ OS prober ________________________________

None


_____________________________ md5sum of EFI files _____________________________

None


========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    (,msdos1)/boot/grub
    ---------------------------------------------------------------------------
 => Windows 7/8/2012 is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 149,1 GiB, 160041885696 octets, 312581808 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   308,404,223   308,402,176  83 Linux
/dev/sda2         308,406,270   312,580,095     4,173,826   5 Extended
/dev/sda5         308,406,272   312,580,095     4,173,824  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________
Disque /dev/sdb : 1,8 TiB, 2000398934016 octets, 3907029168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048 3,907,026,943 3,907,024,896   7 NTFS / exFAT / HPFS


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/sda1        380ac54c-1453-4a38-85ae-3f2079c11ea2   ext4       
/dev/sda5        58614539-d31a-4e7f-b437-80d3bb951bc7   swap       
/dev/sdb1        8472353B72353372                       ntfs       2tera de seb

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 mai   24 11:28 ata-HL-DT-ST_DVDRAM_GSA-T20N_KZ181EH3619 -> ../../sr0
lrwxrwxrwx 1 root root  9 mai   24 11:28 ata-WDC_WD1600BEVT-22ZCT0_WD-WXH108399393 -> ../../sda
lrwxrwxrwx 1 root root 10 mai   24 11:28 ata-WDC_WD1600BEVT-22ZCT0_WD-WXH108399393-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai   24 11:28 ata-WDC_WD1600BEVT-22ZCT0_WD-WXH108399393-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai   24 11:28 ata-WDC_WD1600BEVT-22ZCT0_WD-WXH108399393-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 mai   24 11:28 usb-SAMSUNG_HD204UI_000000000033-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 mai   24 11:28 usb-SAMSUNG_HD204UI_000000000033-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 mai   24 11:28 wwn-0x50014ee25654003f -> ../../sda
lrwxrwxrwx 1 root root 10 mai   24 11:28 wwn-0x50014ee25654003f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai   24 11:28 wwn-0x50014ee25654003f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 mai   24 11:28 wwn-0x50014ee25654003f-part5 -> ../../sda5


_________________________ "ls -R /dev/mapper/" output _________________________

None


________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda1        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1        /media/ornitho/2tera de seb1            fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)



__________________________=== Boot Files Content ===___________________________


___________________________ sda1/boot/grub/grub.cfg: ___________________________

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-380ac54c-1453-4a38-85ae-3f2079c11ea2' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  380ac54c-1453-4a38-85ae-3f2079c11ea2
	else
	  search --no-floppy --fs-uuid --set=root 380ac54c-1453-4a38-85ae-3f2079c11ea2
	fi
        linux	/boot/vmlinuz-4.8.0-52-generic root=UUID=380ac54c-1453-4a38-85ae-3f2079c11ea2 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.8.0-52-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  380ac54c-1453-4a38-85ae-3f2079c11ea2
	else
	  search --no-floppy --fs-uuid --set=root 380ac54c-1453-4a38-85ae-3f2079c11ea2
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  380ac54c-1453-4a38-85ae-3f2079c11ea2
	else
	  search --no-floppy --fs-uuid --set=root 380ac54c-1453-4a38-85ae-3f2079c11ea2
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda1/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=380ac54c-1453-4a38-85ae-3f2079c11ea2 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=58614539-d31a-4e7f-b437-80d3bb951bc7 none            swap    sw              0       0

____________________________ sda1/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.8.0-52-generic root=UUID=380ac54c-1453-4a38-85ae-3f2079c11ea2 ro quiet splash vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 4.327s (kernel) + 31.236s (userspace) = 35.563s


blame, first 10:
dev-sda1.device                     14.735s
apparmor.service                    8.853s
console-setup.service               8.624s
systemd-tmpfiles-setup.service      7.692s
dev-loop1.device                    7.424s
NetworkManager-wait-online.service  5.947s
grub-common.service                 5.232s
apport.service                      5.096s
speech-dispatcher.service           4.699s
irqbalance.service                  4.682s


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @31.207s
  2 multi-user.target @31.207s
  3 teamviewerd.service @26.706s +4.500s
  4 network-online.target @26.686s
  5 NetworkManager-wait-online.service @20.738s +5.947s
  6 NetworkManager.service @17.208s +3.070s
  7 dbus.service @16.840s
  8 basic.target @16.775s
  9 sockets.target @16.775s
 10 snapd.socket @16.689s +83ms
 11 sysinit.target @16.688s
 12 swap.target @16.688s
 13 dev-disk-by\x2duuid-58614539\x2dd31a\x2d4e7f\x2db437\x2d80d3bb951bc7.swap @16.600s +84ms
 14 dev-disk-by\x2duuid-58614539\x2dd31a\x2d4e7f\x2db437\x2d80d3bb951bc7.device @16.586s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           1.9G        1.0G        140M        120M        823M        660M
Swap:          2.0G        4.9M        2.0G
Swappiness = 60

Filesystem     Mounted on                   Type      Size  Used Avail Use% IUse%
/dev/loop0     /snap/vlc/4                  squashfs  116M  116M     0 100%  100%
/dev/loop1     /snap/core/1689              squashfs   80M   80M     0 100%  100%
/dev/sda1      /                            ext4      145G  5.8G  132G   5%    3%
/dev/sdb1      /media/ornitho/2tera de seb1 fuseblk   1.9T  810G  1.1T  44%    1%

Swap partition for hibernation : UUID=58614539-d31a-4e7f-b437-80d3bb951bc7


_________________________________ USB devices __________________________________

Bus 002 Device 002: ID 05e3:0718 Genesys Logic, Inc. IDE/SATA Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
    |__ Port 3: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M


_______________________________ Wireless Status _______________________________

0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
ahci                   36864  2
arc4                   16384  2
ath                    32768  1 ath5k
ath5k                 147456  0
autofs4                40960  2
btrfs                1060864  0
ccm                    20480  2
cfg80211              581632  3 mac80211,ath,ath5k
coretemp               16384  0
crc_itu_t              16384  1 firewire_core
drm                   368640  9 i915,drm_kms_helper
drm_kms_helper        167936  1 i915
fb_sys_fops            16384  1 drm_kms_helper
firewire_core          65536  1 firewire_ohci
firewire_ohci          40960  0
fjes                   28672  0
gpio_ich               16384  0
hfs                    57344  0
hfsplus               106496  0
hid                   122880  2 hid_generic,usbhid
hid_generic            16384  0
i2c_algo_bit           16384  1 i915
i915                 1314816  113
input_leds             16384  0
jfs                   184320  0
joydev                 20480  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
lpc_ich                24576  0
mac80211              761856  1 ath5k
mac_hid                16384  0
mii                    16384  1 r8169
minix                  40960  0
msdos                  20480  0
ntfs                  102400  0
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  0
pata_acpi              16384  0
pcmcia                 69632  0
pcmcia_core            24576  3 yenta_socket,pcmcia,pcmcia_rsrc
pcmcia_rsrc            20480  1 yenta_socket
ppdev                  20480  0
psmouse               139264  0
qnx4                   16384  0
r8169                  81920  0
raid6_pq              102400  1 btrfs
sdhci                  45056  1 sdhci_pci
sdhci_pci              28672  0
serio_raw              16384  0
shpchp                 36864  0
snd                    86016  17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     45056  1
snd_hda_codec_realtek    86016  1
snd_hda_core           86016  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel          36864  3
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               110592  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
uas                    24576  0
ufs                    73728  0
usbhid                 53248  0
usb_storage            73728  2 uas
video                  40960  1 i915
xfs                  1048576  0
xor                    24576  1 btrfs
yenta_socket           49152  0


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free


__________________________________ Locales ___________________________________

locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_FR.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr,fr,us
variant:    latin9,oss,

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

None


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  javascript-common libjs-jquery libqt4-designer libqt4-help
  libqt4-scripttools libqt4-svg libqt4-test libqtassistantclient4 libqtwebkit4
  python-attr python-blinker python-cffi-backend python-cryptography
  python-enum34 python-flask python-idna python-ipaddress python-itsdangerous
  python-jinja2 python-markupsafe python-openssl python-pam python-parsley
  python-pkg-resources python-psutil python-pyasn1 python-pyasn1-modules
  python-pyinotify python-qt4 python-serial python-service-identity python-sip
  python-six python-stem python-twisted python-twisted-bin python-twisted-core
  python-txsocksx python-werkzeug python-zope.interface snap-confine tor
  tor-geoipdb torbrowser-launcher torsocks
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


_________________________ Kernel Packages Installed __________________________

Package                             Version
linux-generic-hwe-16.04             4.8.0.52.23
linux-headers-4.8.0-36              4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic      4.8.0-36.36~16.04.1
linux-headers-4.8.0-52              4.8.0-52.55~16.04.1
linux-headers-4.8.0-52-generic      4.8.0-52.55~16.04.1
linux-headers-generic-hwe-16.04     4.8.0.52.23
linux-image-4.8.0-36-generic        4.8.0-36.36~16.04.1
linux-image-4.8.0-52-generic        4.8.0-52.55~16.04.1
linux-image-extra-4.8.0-36-generic  4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-52-generic  4.8.0-52.55~16.04.1
linux-image-generic-hwe-16.04       4.8.0.52.23


File list in /boot directory:
abi-4.8.0-36-generic
abi-4.8.0-52-generic
config-4.8.0-36-generic
config-4.8.0-52-generic
grub
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-52-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-36-generic
System.map-4.8.0-52-generic
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-52-generic



_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.137036] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.145672] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.153888] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.156014] SCSI subsystem initialized
[    1.293681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.309750] scsi host0: ata_piix
[    1.309952] scsi host1: ata_piix
[    1.310036] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.310038] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.529882] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WA03 PQ: 0 ANSI: 5
[    1.555188] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.555434] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.555550] sr 0:0:1:0: Attached scsi generic sg0 type 5
[    1.762781] scsi host2: ahci
[    1.768045] scsi host3: ahci
[    1.774338] scsi host4: ahci
[    1.848937] scsi host5: usb-storage 2-3:1.0
[    2.248101] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.297933] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-2 1A11 PQ: 0 ANSI: 5
[    2.328416] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.328591] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.357772] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.642818] ata4: SATA link down (SStatus 0 SControl 300)
[    2.887257] scsi 5:0:0:0: Direct-Access     SAMSUNG  HD204UI          0041 PQ: 0 ANSI: 0
[    2.888150] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    2.889882] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.898746] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.958898] ata5: SATA link down (SStatus 0 SControl 300)
[   10.900845] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.837000] yenta_cardbus 0000:01:04.0: Socket status: 30000006
[   19.675753] audit: type=1400 audit(1495618106.772:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=507 comm="apparmor_parser"
[   19.675769] audit: type=1400 audit(1495618106.772:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=507 comm="apparmor_parser"
[   19.675777] audit: type=1400 audit(1495618106.772:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=507 comm="apparmor_parser"
[   19.675785] audit: type=1400 audit(1495618106.772:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=507 comm="apparmor_parser"
[   19.677072] audit: type=1400 audit(1495618106.776:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=506 comm="apparmor_parser"
[   19.677086] audit: type=1400 audit(1495618106.776:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=506 comm="apparmor_parser"
[   19.679210] audit: type=1400 audit(1495618106.776:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine" pid=564 comm="apparmor_parser"
[   19.679226] audit: type=1400 audit(1495618106.776:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=564 comm="apparmor_parser"
[   19.682104] audit: type=1400 audit(1495618106.780:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=565 comm="apparmor_parser"
[   19.771957] audit: type=1400 audit(1495618106.868:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=566 comm="apparmor_parser"
[   27.906052] audit: type=1400 audit(1495618115.004:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine" pid=932 comm="apparmor_parser"
[   27.920433] audit: type=1400 audit(1495618115.020:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=932 comm="apparmor_parser"
[   27.929801] audit: type=1400 audit(1495618115.028:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=936 comm="apparmor_parser"
[   27.944993] audit: type=1400 audit(1495618115.044:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.vlc.vlc" pid=939 comm="apparmor_parser"
[   29.123875] wlp3s0: RX AssocResp from 08:3e:5d:26:44:60 (capab=0x411 status=0 aid=2)


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ SynPS/2 Synaptics TouchPad              	id=11	[slave  pointer  (2)]
⎜   ↳ Logitech USB-PS/2 Optical Mouse         	id=12	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=8	[slave  keyboard (3)]
    ↳ Power Button                            	id=9	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=10	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
LVDS-1 connected primary 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
   1280x800      59.91*+
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   960x600       60.00  
   960x540       59.99  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   800x512       60.17  
   700x525       59.98  
   640x512       60.02  
   720x450       59.89  
   640x480       60.00    59.94  
   680x384       59.80    59.96  
   576x432       60.06  
   512x384       60.00  
   400x300       60.32    56.34  
   320x240       60.05  
VGA-1 disconnected (normal left inverted right x axis y axis)


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.289] (==) No Layout section.  Using the first Screen section.
[    27.289] (==) No screen section available. Using defaults.
[    27.289] (**) |-->Screen "Default Screen Section" (0)
[    27.289] (**) |   |-->Monitor "<default monitor>"
[    27.390] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    27.432] (--) PCI:*(0:0:2:0) 8086:2a02:1462:3ff3 rev 3, Mem @ 0xfde00000/1048576, 0xd0000000/268435456, I/O @ 0x0000b400/8, BIOS @ 0x????????/131072
[    27.432] (--) PCI: (0:0:2:1) 8086:2a03:1462:3ff3 rev 3, Mem @ 0xfdf00000/1048576
[    27.432] (II) LoadModule: "glx"
[    27.485] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    27.699] (II) LoadModule: "modesetting"
[    27.700] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    27.700] (II) LoadModule: "fbdev"
[    27.700] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.700] (II) LoadModule: "vesa"
[    27.701] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.713] (WW) Falling back to old probe method for fbdev
[    27.713] (II) Loading sub module "fbdevhw"
[    27.713] (II) LoadModule: "fbdevhw"
[    27.713] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.713] (WW) Falling back to old probe method for vesa
[    27.713] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    27.714] (II) Loading sub module "glamoregl"
[    27.714] (II) LoadModule: "glamoregl"
[    27.714] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    28.513] (II) modeset(0): Output LVDS-1 has no monitor section
[    28.536] (II) modeset(0): Output VGA-1 has no monitor section
[    28.560] (II) Loading sub module "fb"
[    28.560] (II) LoadModule: "fb"
[    28.561] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.574] (II) UnloadModule: "fbdev"
[    28.574] (II) UnloadModule: "vesa"
[    29.613] (II) GLX: Initialized DRI2 GL provider for screen 0
[    29.734] (II) modeset(0): Setting screen physical size to 338 x 211
[    30.011] (II) LoadModule: "evdev"
[    30.011] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.126] (II) LoadModule: "synaptics"
[    30.127] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-52-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-52-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:2a02
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 8086:2a03
BusID "PCI:0@0:2:1"
Is boot vga? no
Error: can't access /sys/bus/pci/devices/0000:00:02.1/driver
The device is not bound to any driver. Skipping...
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
	card0-LVDS-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do


============================ Disks SMART Attributes ===========================

### ATA disks: sda

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-52-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD1600BEVT-22ZCT0
LU WWN Device Id: 5 0014ee 25654003f
Firmware Version: 11.01A11
User Capacity:    160 041 885 696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.5, 3.0 Gb/s
Local Time is:    Wed May 24 11:34:44 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   183   183   051    -    117407
  3 Spin_Up_Time            POS--K   159   158   021    -    1016
  4 Start_Stop_Count        -O--CK   098   098   000    -    2378
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         POSR-K   100   253   051    -    0
  9 Power_On_Hours          -O--CK   097   097   000    -    2789
 10 Spin_Retry_Count        PO--CK   100   100   051    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   099   099   000    -    1695
192 Power-Off_Retract_Count -O--CK   200   200   000    -    380
193 Load_Cycle_Count        -O--CK   174   174   000    -    79054
194 Temperature_Celsius     -O---K   100   084   000    -    43
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    1
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   P--R--   100   253   051    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
Warning: ATA error count 51879 inconsistent with error log pointer 5

ATA Error Count: 51879 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 51879 occurred at disk power-on lifetime: 2781 hours (115 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 e2 b9 c7 60  Error: WP at LBA = 0x00c7b9e2 = 13089250

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 e0 88 40 4d 02 00      01:26:33.018  WRITE FPDMA QUEUED
  61 08 d8 00 11 4b 02 00      01:26:33.017  WRITE FPDMA QUEUED
  61 08 d0 f8 59 4d 02 00      01:26:33.017  WRITE FPDMA QUEUED
  60 40 c8 e0 b9 c7 00 00      01:26:33.017  READ FPDMA QUEUED
  ef 02 00 00 00 00 00 00      01:26:33.017  SET FEATURES [Enable write cache]

Error 51878 occurred at disk power-on lifetime: 2781 hours (115 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 e2 b9 c7 60  Error: UNC at LBA = 0x00c7b9e2 = 13089250

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 40 a0 e0 b9 c7 00 00      01:26:29.843  READ FPDMA QUEUED
  61 08 98 e8 57 4d 02 00      01:26:29.842  WRITE FPDMA QUEUED
  61 08 90 f0 59 4d 02 00      01:26:29.842  WRITE FPDMA QUEUED
  61 08 88 e8 59 4d 02 00      01:26:29.842  WRITE FPDMA QUEUED
  ef 02 00 00 00 00 00 00      01:26:29.842  SET FEATURES [Enable write cache]

Error 51877 occurred at disk power-on lifetime: 2781 hours (115 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 e2 b9 c7 60  Error: WP at LBA = 0x00c7b9e2 = 13089250

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 60 20 05 bc 00 00      01:26:26.167  WRITE FPDMA QUEUED
  61 08 58 80 a6 bf 00 00      01:26:26.167  WRITE FPDMA QUEUED
  61 08 50 d8 0c df 02 00      01:26:26.166  WRITE FPDMA QUEUED
  61 08 48 60 0c df 02 00      01:26:26.166  WRITE FPDMA QUEUED
  61 07 40 e8 14 df 02 00      01:26:26.165  WRITE FPDMA QUEUED

Error 51876 occurred at disk power-on lifetime: 2781 hours (115 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 e2 b9 c7 60  Error: WP at LBA = 0x00c7b9e2 = 13089250

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 a8 90 59 4d 02 00      01:26:23.026  WRITE FPDMA QUEUED
  61 10 a0 80 59 4d 02 00      01:26:23.026  WRITE FPDMA QUEUED
  61 08 98 a8 04 4b 02 00      01:26:23.026  WRITE FPDMA QUEUED
  61 08 90 88 c4 1c 01 00      01:26:23.026  WRITE FPDMA QUEUED
  60 40 88 e0 b9 c7 00 00      01:26:23.003  READ FPDMA QUEUED

Error 51875 occurred at disk power-on lifetime: 2781 hours (115 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 e2 b9 c7 60  Error: WP at LBA = 0x00c7b9e2 = 13089250

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 58 30 5e 1c 01 00      01:26:19.247  WRITE FPDMA QUEUED
  61 08 50 a8 47 1c 01 00      01:26:19.246  WRITE FPDMA QUEUED
  61 08 40 40 40 1c 01 00      01:26:19.246  WRITE FPDMA QUEUED
  61 08 38 18 1f 1c 01 00      01:26:19.245  WRITE FPDMA QUEUED
  61 10 30 50 de 1b 01 00      01:26:19.245  WRITE FPDMA QUEUED



### USB disks: sdb

# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-52-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F4 EG (AF)
Device Model:     SAMSUNG HD204UI
LU WWN Device Id: 5 0024e9 003fbfaa5
Firmware Version: 1AQ10001
User Capacity:    2 000 398 934 016 bytes [2,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed May 24 11:34:44 2017 CEST

==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   051    -    0
  2 Throughput_Performance  -OS--K   252   252   000    -    0
  3 Spin_Up_Time            PO---K   093   093   025    -    2221
  4 Start_Stop_Count        -O--CK   100   100   000    -    150
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR-K   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    1
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 11 Calibration_Retry_Count -O--CK   252   252   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    990
181 Program_Fail_Cnt_Total  -O---K   100   100   000    -    139
191 G-Sense_Error_Rate      -O---K   252   252   000    -    0
192 Power-Off_Retract_Count -O---K   252   252   000    -    0
194 Temperature_Celsius     -O----   063   063   000    -    37 (Min/Max 37/37)
195 Hardware_ECC_Recovered  -O-RCK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--CK   252   252   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   100   100   000    -    1
200 Multi_Zone_Error_Rate   -O-R-K   100   100   000    -    0
223 Load_Retry_Count        -O--CK   252   252   000    -    0
225 Load_Cycle_Count        -O--CK   100   100   000    -    1037
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

Je pense que tout est correct. Cependant, je pense qu'avec ton vieux matériel, tu aurais dû installer Ubuntu 16.04.1 au lieu de 16.04.2 parce que tu vas avoir des mises à jour du noyau assez lourdingues (*), sensées améliorer la prise en charge des ordis très récents mais qui risquent d'être mal supportées par ton ordi.

(*) ça se voit sur ce graphique : https://wiki.ubuntu.com/Kernel/RollingL … k#Proposal
Si tu avais installé 16.04.1, tu serais resté sur le noyau 4.4 alors qu'avec la 16.04.2, tu vas descendre l'escalier (16.04.3 puis 16.04.4 puis 16.04.5)

Dernière modification par malbo (Le 24/05/2017, à 12:34)

Hors ligne

#11 Le 24/05/2017, à 13:02

nam1962

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

@malbo : je plussoie (en rappelant mon post #4 tongue )

Dernière modification par nam1962 (Le 24/05/2017, à 14:00)


[ Modéré ]

Hors ligne

#12 Le 24/05/2017, à 13:54

malbo

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

@nam1962 : c'est dans le post #4 que tu proposes d'installer Xubuntu 16.04.1 version 32 bits (avec le lien de téléchargement de l'ISO). C'est une bonne proposition à condition d'apprécier Xubuntu...

Dernière modification par malbo (Le 24/05/2017, à 13:55)

Hors ligne

#13 Le 24/05/2017, à 13:59

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

c'est vrai je vais changer et installer le 16-04-1 merci encore

Hors ligne

#14 Le 24/05/2017, à 14:03

nam1962

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

malbo a écrit :

@nam1962 : c'est dans le post #4 que tu proposes d'installer Xubuntu 16.04.1 version 32 bits (avec le lien de téléchargement de l'ISO). C'est une bonne proposition à condition d'apprécier Xubuntu...

Merci, corrigé !
...sinon, qui n'apprécie pas une Xubuntu optimisée à sa main ? wink

https://www.youtube.com/watch?v=iYWZI7q4xb0


[ Modéré ]

Hors ligne

#15 Le 24/05/2017, à 14:27

malbo

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Non merci, sans façon.

Hors ligne

#16 Le 24/05/2017, à 15:22

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

j'essaie deseperement  d'installer xubuntu 16-04-1 32 bits et je n'y arrive pas et je m'aperçois que mon PC est 64 bits ...
faudrait il pas plutôt essayer d'installer un xubuntu 16-04-1 64 bits...

Hors ligne

#17 Le 24/05/2017, à 15:33

nam1962

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Tu peux essayer le 64bits, je proposais le 32bits vu ta RAM (mais je ne vois pas de raison pour que le 32bits foire)
http://ftp.free.fr/mirrors/ftp.xubuntu. … -amd64.iso

Peux tu nous dire à quel moment ça coince avec le 32bits ?

Dernière modification par nam1962 (Le 24/05/2017, à 15:33)


[ Modéré ]

Hors ligne

#18 Le 24/05/2017, à 15:35

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

je boot via le dvd et la j'ai un message sur ecran noir et cela reste bloqué....

Hors ligne

#19 Le 24/05/2017, à 15:40

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Le message est le suivant

"isolinux 6.03 20151222 ETCD Copyright (C) 1994-2014 H.Peter et al "

- qui clignote sur fond noir

Hors ligne

#20 Le 24/05/2017, à 15:59

nam1962

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Comment as tu fait ta liveusb ?


[ Modéré ]

Hors ligne

#21 Le 24/05/2017, à 17:49

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

J'ai gravé xubuntu 16-04-01 64 bits sur un DVD et j'essaie de l'installer sur mon PC et je suis devant un ecran bleu clair ça tourne un moment puis ça bloque....au bout de 5 minutes...

Dernière modification par ornitho81 (Le 24/05/2017, à 17:51)

Hors ligne

#22 Le 24/05/2017, à 19:04

nam1962

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Essaie avec l'option nomodeset (touche F6 sur le premier écran)


[ Modéré ]

Hors ligne

#23 Le 26/05/2017, à 09:01

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Bonjour,

ça y est c'était le DVD/RW qui avait un peu vécu et la version 32 bits qui ne voulait pas se lancer.
Mais la un DVD tout neuf et la  version 64 bits tout à l'air de bien se lancer.

Merci pour toutes les infos...

Hors ligne

#24 Le 26/05/2017, à 09:58

malbo

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

Je viens d'ajouter ton modèle VR601-046 dans la Liste des portables « MSI »

Hors ligne

#25 Le 26/05/2017, à 10:11

ornitho81

Re : [Résolu] comment installer et quelle version ubuntu sur PC MSI VR601?

ok

Hors ligne