Pages : 1
#1 Le 14/01/2018, à 17:33
- philippe0386
(RESOLU)installation clé wifi D LINK N 300 nano
mais je n ai pas tout compris!onjour et bonne année a tous ... pour moi l année 2018 commence avec l immersion dans le monde ubuntu .j ai monté un pc en dual boot ubuntu/windows 10 ,carte mere asus B 250 +/intel i 5 -6500 .
en suivant la documentation en ligne j ai repéré le périphérique usb : bus 001device 003 ID 2001:3319 qui correspond a la révision E1 .en principe j ai effectué les commandes comme indiqué et cela ne fonctionne pas.
Comme indiqué j ai relevé dans le terminal les infos nécéssaires:
phil@phil-System-Product-Name:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.3 LTS"
phil@phil-System-Product-Name:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 2001:3319 D-Link Corp.
Bus 001 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
phil@phil-System-Product-Name:~$ lspci
00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06)
00:14.0 USB controller: Intel Corporation Device a2af
00:16.0 Communication controller: Intel Corporation Device a2ba
00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode]
00:1c.0 PCI bridge: Intel Corporation Device a294 (rev f0)
00:1c.5 PCI bridge: Intel Corporation Device a295 (rev f0)
00:1c.7 PCI bridge: Intel Corporation Device a297 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Device a298 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a2c8
00:1f.2 Memory controller: Intel Corporation Device a2a1
00:1f.3 Audio device: Intel Corporation Device a2f0
00:1f.4 SMBus: Intel Corporation Device a2a3
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
phil@phil-System-Product-Name:~$ lspci -k -nn | grep -A 3 -i net
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:8677]
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 04)
phil@phil-System-Product-Name:~$ sudo lshw -C network
[sudo] Mot de passe de phil :
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: enp2s0
version: 15
numéro de série: b0:6e:bf:c4:1f:ae
taille: 100Mbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.1.102 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
ressources: irq:124 portE/S:e000(taille=256) mémoire:f7004000-f7004fff mémoire:f7000000-f7003fff
hil@phil-System-Product-Name:~$ lsmod
Module Size Used by
bnep 20480 2
nls_iso8859_1 16384 1
eeepc_wmi 16384 0
asus_wmi 28672 1 eeepc_wmi
sparse_keymap 16384 1 asus_wmi
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 90112 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_intel 36864 3
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 102400 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
snd 77824 17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
intel_rapl 20480 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
kvm 593920 0
irqbypass 16384 1 kvm
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0──
pcbc 16384 0
aesni_intel 167936 0
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
glue_helper 16384 1 aesni_intel
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
intel_cstate 20480 0
intel_rapl_perf 16384 0
input_leds 16384 0
serio_raw 16384 0
soundcore 16384 1 snd
shpchp 36864 0
mei_me 40960 0
mei 102400 1 mei_me
hci_uart 98304 0
btbcm 16384 1 hci_uart
btqca 16384 1 hci_uart
btintel 16384 1 hci_uart
bluetooth 557056 11 hci_uart,btintel,btqca,bnep,btbcm
intel_lpss_acpi 16384 0──
acpi_pad 180224 0
intel_lpss 16384 1 intel_lpss_acpi
acpi_als 16384 0
mac_hid 16384 0
kfifo_buf 16384 1 acpi_als
industrialio 69632 2 acpi_als,kfifo_buf
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
autofs4 40960 2
hid_generic 16384 0
usbhid 53248 0
mxm_wmi 16384 0
i915 1449984 116
i2c_algo_bit 16384 1 i915
drm_kms_helper 151552 1 i915
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
r8169 81920 0
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
mii 16384 1 r8169──
drm 352256 7 i915,drm_kms_helper
ahci 36864 3
libahci 32768 1 ahci
wmi 16384 2 asus_wmi,mxm_wmi
video 40960 2 asus_wmi,i915
i2c_hid 20480 0
hid 118784 3 i2c_hid,hid_generic,usbhid
fjes 77824 0
phil@phil-System-Product-Name:~$ iwconfig
lo no wireless extensions.
enp2s0 no wireless extensions.
phil@phil-System-Product-Name:~$ ifconfig
enp2s0 Link encap:Ethernet HWaddr b0:6e:bf:c4:1f:ae
inet adr:192.168.1.102 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::4257:6e56:9017:75b/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:4216 erreurs:0 :0 overruns:0 frame:0
TX packets:3728 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000 ──
Octets reçus:2385271 (2.3 MB) Octets transmis:520614 (520.6 KB)
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
Packets reçus:664 erreurs:0 :0 overruns:0 frame:0
TX packets:664 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:58304 (58.3 KB) Octets transmis:58304 (58.3 KB)
phil@phil-System-Product-Name:~$ sudo iwlist scan
lo Interface doesn't support scanning.
enp2s0 Interface doesn't support scanning.
──
phil@phil-System-Product-Name:~$ uname -r -m
4.10.0-42-generic x86_64
phil@phil-System-Product-Name:~$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
phil@phil-System-Product-Name:~$ nm-tool
La commande « nm-tool » est introuvable, vouliez-vous dire :
La commande « dm-tool » du paquet « lightdm » (main)
nm-tool : commande introuvableOk>
phil@phil-System-Product-Name:~$ sudo rfkill list
phil@phil-System-Product-Name:~$ nmcli connection show
NOM UUID TYPE PÉRIPHÉRIQUE
Connexion filaire 1 2065ee66-54d9-39db-a179-3fe440f6db12 802-3-ethernet enp2s0
phil@phil-System-Product-Name:~$ nmcli connection list si nmcli connection show ne fonctionne pas
Syntaxe : nmcli connection { COMMAND | help }
COMMAND := { show | up | down | add | modify | edit | delete | monitor | reload | load }
──
show [--active] [--order <order spec>]
show [--active] [id | uuid | path | apath] <ID> ...
up [[id | uuid | path] <ID>] [ifname <ifname>] [ap <BSSID>] [passwd-file <file with passwords>]
down [id | uuid | path | apath] <ID> ...
Ok>
add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]<setting>.<property> <value>)+]
modify [--temporary] [id | uuid | path] <ID> ([+|-]<setting>.<property> <value>)+
clone [--temporary] [id | uuid | path ] <ID> <new name>
edit [id | uuid | path] <ID>
edit [type <new_con_type>] [con-name <new_con_name>]
delete [id | uuid | path] <ID>
monitor [id | uuid | path] <ID> ...
reload
──
load <filename> [ <filename>... ]
import [--temporary] type <type> file <file to import>
export [id | uuid | path] <ID> [<output file>]
Erreur : « list » n'est pas une commande « connection » valide.
phil@phil-System-Product-Name:~$
Ok>
merci d'avance j'espere que vous allez vous y retrouver
[code]The resolvconf package contains the infrastructure required for dynamic
│ updating of the resolver configuration file. Part of the necessary
│ infrastructure is a symbolic link from /etc/resolv.conf to
│ /run/resolvconf/resolv.conf. If you choose this option then this link
│ will be created; the existing /etc/resolv.conf file will be preserved as
│ /etc/resolvconf/resolv.conf.d/original, and will be restored if this
│ package is removed.
│
│ Declining this option will prevent future installations from recreating
│ the symbolic link and therefore the resolver configuration file will not
│ be dynamically updated. Dynamic updating can then be activated following
│ instructions in the README file.
│
│ The presence of resolvconf can affect the behavior of other programs, so
│ merci encore [/code]
Dernière modification par philippe0386 (Le 14/01/2018, à 18:41)
Hors ligne
#2 Le 14/01/2018, à 17:38
- xubu1957
Re : (RESOLU)installation clé wifi D LINK N 300 nano
Bonjour,
Pour ajouter toi-même les balises code à ton précédent message…
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
comme indiqué dans Retour utilisable de commande
Pour ta clé :
ID 2001:3319 D-Link Corp.
Tu as bien vu la Doc > dwa-131#revision_e1
Pour ton noyau, copié de la version 17.04 :
uname -r -m
4.10.0-42-generic x86_64
Il fallait regarder Anomalies réseaux en Ethernet et Wifi sur la version 17.04
noyau de la version 17.04, qui n'est plus maintenu depuis hier.
...
fais de la place :sudo apt-get clean ; sudo apt-get autoremove --purge
puis fais tes mises à jour en montrant :
sudo apt-get update && sudo apt-get dist-upgrade -y
Et redémarre.
Tu seras alors sur un noyau de 17.10, maintenu.
Ensuite applique Anomalies réseaux en Ethernet sur la version 17.10.
Et reviens raconter.
Dernière modification par xubu1957 (Le 14/01/2018, à 18:04)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
Pages : 1