#1 Le 19/03/2018, à 11:49
- simonbref
Grub error + error boot-repair - lubuntu/win10 double boot
Bonjour à tous,
Mon installation en double boot lubuntu/win10 marchait à la perfection pendant les 4 ou 5 premières utilisation après install de lubuntu (j'ai suivi un tuto en créant différentes partitions pour lubuntu (une pour la racine, d'autres en plus pour pouvoir réparer en cas de problème, récupérer les fichiers etc...), mais une "error grub" m'apparait maintenant à l'allumage.
J'ai tenté un boot-repair, mais : erreur lors de la réparation.
Voilà le log, merci pour votre aide !
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 17.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>.......#..:...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 32784 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 596.2 GiB, 640135028736 bytes, 1250263728 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,026,047 1,024,000 7 NTFS / exFAT / HPFS
/dev/sda2 1,026,048 1,199,060,991 1,198,034,944 7 NTFS / exFAT / HPFS
/dev/sda3 1,199,063,038 1,250,263,039 51,200,002 5 Extended
/dev/sda5 1,199,063,040 1,222,498,303 23,435,264 83 Linux
/dev/sda6 1,222,500,352 1,245,935,615 23,435,264 83 Linux
/dev/sda7 1,245,937,664 1,250,263,039 4,325,376 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 14.5 GiB, 15597568000 bytes, 30464000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 30,463,999 30,461,952 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 8208AB4608AB37D5 ntfs Réservé au système
/dev/sda2 8ABAB217BAB1FFAD ntfs
/dev/sda5 8733cecd-5799-4d98-b2fd-85ed73664039 ext4
/dev/sda6 ceb5ea43-f639-4419-ae16-1cb587b87abe ext4
/dev/sda7 15ad6375-7463-4154-9eff-482359f7f43f swap
/dev/sdb1 4419-3CC5 vfat LUBUNTU 17_
/dev/zram0 8c91b757-3051-4e82-9c9f-7e4644bbc902 swap
/dev/zram1 0680a829-e12f-425b-8928-3ffe4e7637d0 swap
/dev/zram2 654155dd-99f3-4da8-b2d8-8c860018a104 swap
/dev/zram3 2881c7b8-2b38-4835-adae-a684c5bc610f swap
/dev/zram4 31792ccf-1f7f-43c3-928b-a3cd655825df swap
/dev/zram5 27b2ab6d-6de5-4db5-9db9-4aaf6ac0ebfd swap
/dev/zram6 8b82d5fe-c9ab-4bd4-9527-e5395e07e7c5 swap
/dev/zram7 e0c946f2-4b6e-41c6-9a93-0b20ea31841c swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Mar 19 08:55 ata-MATSHITA_DVD+_-RW_UJ890_UH48_569163 -> ../../sr0
lrwxrwxrwx 1 root root 9 Mar 19 08:55 ata-SAMSUNG_HM640JJ_S2AQJ1RZA00743 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 19 08:56 ata-SAMSUNG_HM640JJ_S2AQJ1RZA00743-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 19 08:56 ata-SAMSUNG_HM640JJ_S2AQJ1RZA00743-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 19 08:55 ata-SAMSUNG_HM640JJ_S2AQJ1RZA00743-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Mar 19 08:55 ata-SAMSUNG_HM640JJ_S2AQJ1RZA00743-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Mar 19 08:55 ata-SAMSUNG_HM640JJ_S2AQJ1RZA00743-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Mar 19 08:55 ata-SAMSUNG_HM640JJ_S2AQJ1RZA00743-part7 -> ../../sda7
lrwxrwxrwx 1 root root 9 Mar 19 08:55 usb-SanDisk_Ultra_4C530001300405110362-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Mar 19 08:55 usb-SanDisk_Ultra_4C530001300405110362-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Mar 19 08:55 wwn-0x50024e90043c93ca -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 19 08:56 wwn-0x50024e90043c93ca-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Mar 19 08:56 wwn-0x50024e90043c93ca-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Mar 19 08:55 wwn-0x50024e90043c93ca-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Mar 19 08:55 wwn-0x50024e90043c93ca-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Mar 19 08:55 wwn-0x50024e90043c93ca-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Mar 19 08:55 wwn-0x50024e90043c93ca-part7 -> ../../sda7
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 8733cecd-5799-4d98-b2fd-85ed73664039
else
search --no-floppy --fs-uuid --set=root 8733cecd-5799-4d98-b2fd-85ed73664039
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8733cecd-5799-4d98-b2fd-85ed73664039' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 8733cecd-5799-4d98-b2fd-85ed73664039
else
search --no-floppy --fs-uuid --set=root 8733cecd-5799-4d98-b2fd-85ed73664039
fi
linux /boot/vmlinuz-4.13.0-21-generic root=UUID=8733cecd-5799-4d98-b2fd-85ed73664039 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-21-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-8733cecd-5799-4d98-b2fd-85ed73664039' {
menuentry 'Ubuntu, avec Linux 4.13.0-21-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-21-generic-advanced-8733cecd-5799-4d98-b2fd-85ed73664039' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 8733cecd-5799-4d98-b2fd-85ed73664039
else
search --no-floppy --fs-uuid --set=root 8733cecd-5799-4d98-b2fd-85ed73664039
fi
echo 'Chargement de Linux 4.13.0-21-generic…'
linux /boot/vmlinuz-4.13.0-21-generic root=UUID=8733cecd-5799-4d98-b2fd-85ed73664039 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-21-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-21-generic-recovery-8733cecd-5799-4d98-b2fd-85ed73664039' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 8733cecd-5799-4d98-b2fd-85ed73664039
else
search --no-floppy --fs-uuid --set=root 8733cecd-5799-4d98-b2fd-85ed73664039
fi
echo 'Chargement de Linux 4.13.0-21-generic…'
linux /boot/vmlinuz-4.13.0-21-generic root=UUID=8733cecd-5799-4d98-b2fd-85ed73664039 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.13.0-21-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 8733cecd-5799-4d98-b2fd-85ed73664039
else
search --no-floppy --fs-uuid --set=root 8733cecd-5799-4d98-b2fd-85ed73664039
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 8733cecd-5799-4d98-b2fd-85ed73664039
else
search --no-floppy --fs-uuid --set=root 8733cecd-5799-4d98-b2fd-85ed73664039
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-8208AB4608AB37D5' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 8208AB4608AB37D5
else
search --no-floppy --fs-uuid --set=root 8208AB4608AB37D5
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=8733cecd-5799-4d98-b2fd-85ed73664039 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda6 during installation
UUID=ceb5ea43-f639-4419-ae16-1cb587b87abe /home ext4 defaults 0 2
# swap was on /dev/sda7 during installation
UUID=15ad6375-7463-4154-9eff-482359f7f43f none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
573.894649506 = 616.214687744 boot/grub/grub.cfg 1
576.389263153 = 618.893258752 boot/grub/i386-pc/core.img 1
573.272907257 = 615.547097088 boot/vmlinuz-4.13.0-21-generic 1
573.272907257 = 615.547097088 vmlinuz 1
578.922363281 = 621.613154304 boot/initrd.img-4.13.0-21-generic 1
578.922363281 = 621.613154304 initrd.img 1
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Boot-Repair-Disk session" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^64bit session
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
label ubnentry2
menu label ^64bit session (failsafe)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper noapic noapm nodma nomce nolapic nomodeset nosmp vga=normal --
label ubnentry3
menu label Boot-Repair-Disk session
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 07 00 00 00 00 00 00 00 e7 d3 36 00 00 00 00 00 |..........6.....|
00000010 e6 d3 36 00 00 00 00 00 e5 d3 36 00 00 00 00 00 |..6.......6.....|
00000020 e3 d3 36 00 00 00 00 00 e2 d3 36 00 00 00 00 00 |..6.......6.....|
00000030 e1 d3 36 00 00 00 00 00 35 cc 36 00 00 00 00 00 |..6.....5.6.....|
00000040 40 00 00 00 00 00 08 00 3a 46 0b 00 00 00 00 00 |@.......:F......|
00000050 07 00 00 00 00 00 00 00 e0 d3 36 00 00 00 00 00 |..........6.....|
00000060 df d3 36 00 00 00 00 00 de d3 36 00 00 00 00 00 |..6.......6.....|
00000070 dc d3 36 00 00 00 00 00 db d3 36 00 00 00 00 00 |..6.......6.....|
00000080 da d3 36 00 00 00 00 00 12 cc 36 00 00 00 00 00 |..6.......6.....|
00000090 40 00 00 00 00 00 08 00 39 46 0b 00 00 00 00 00 |@.......9F......|
000000a0 07 00 00 00 00 00 00 00 d9 d3 36 00 00 00 00 00 |..........6.....|
000000b0 d8 d3 36 00 00 00 00 00 d7 d3 36 00 00 00 00 00 |..6.......6.....|
000000c0 d5 d3 36 00 00 00 00 00 d4 d3 36 00 00 00 00 00 |..6.......6.....|
000000d0 d3 d3 36 00 00 00 00 00 27 cc 36 00 00 00 00 00 |..6.....'.6.....|
000000e0 40 00 00 00 00 00 08 00 38 46 0b 00 00 00 00 00 |@.......8F......|
000000f0 07 00 00 00 00 00 00 00 d2 d3 36 00 00 00 00 00 |..........6.....|
00000100 d1 d3 36 00 00 00 00 00 d0 d3 36 00 00 00 00 00 |..6.......6.....|
00000110 ce d3 36 00 00 00 00 00 cd d3 36 00 00 00 00 00 |..6.......6.....|
00000120 cc d3 36 00 00 00 00 00 04 cc 36 00 00 00 00 00 |..6.......6.....|
00000130 40 00 00 00 00 00 08 00 37 46 0b 00 00 00 00 00 |@.......7F......|
00000140 07 00 00 00 00 00 00 00 cb d3 36 00 00 00 00 00 |..........6.....|
00000150 ca d3 36 00 00 00 00 00 c9 d3 36 00 00 00 00 00 |..6.......6.....|
00000160 c7 d3 36 00 00 00 00 00 c6 d3 36 00 00 00 00 00 |..6.......6.....|
00000170 c5 d3 36 00 00 00 00 00 19 cc 36 00 00 00 00 00 |..6.......6.....|
00000180 40 00 00 00 00 00 08 00 36 46 0b 00 00 00 00 00 |@.......6F......|
00000190 07 00 00 00 00 00 00 00 c4 d3 36 00 00 00 00 00 |..........6.....|
000001a0 c3 d3 36 00 00 00 00 00 c2 d3 36 00 00 00 00 00 |..6.......6.....|
000001b0 c0 d3 36 00 00 00 00 00 bf d3 36 00 00 00 00 fe |..6.......6.....|
000001c0 ff ff 83 fe ff ff 02 00 00 00 00 98 65 01 00 fe |............e...|
000001d0 ff ff 05 fe ff ff 03 98 65 01 ff 9f 65 01 00 00 |........e...e...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
ADDITIONAL INFORMATION :
=================== log of boot-repair 20180319_0855 ===================
boot-repair version : 4ppa62
boot-sav version : 4ppa62
boot-sav-extra version : 4ppa62
glade2script version : 3.2.3~ppa4
boot-repair is executed in live-session (Boot-Repair-Disk 64bit 1oct2017, zesty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
initrd=/casper/initrd.lz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sda1:Windows 10:Windows:chain
/dev/sda5:Ubuntu 17.10 (17.10):Ubuntu:linux
=================== blkid:
/dev/sda1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="8208AB4608AB37D5" TYPE="ntfs" PARTUUID="0001ae1e-01"
/dev/sda2: UUID="8ABAB217BAB1FFAD" TYPE="ntfs" PARTUUID="0001ae1e-02"
/dev/sda5: UUID="8733cecd-5799-4d98-b2fd-85ed73664039" TYPE="ext4" PARTUUID="0001ae1e-05"
/dev/sda6: UUID="ceb5ea43-f639-4419-ae16-1cb587b87abe" TYPE="ext4" PARTUUID="0001ae1e-06"
/dev/sdb1: LABEL="LUBUNTU 17_" UUID="4419-3CC5" TYPE="vfat" PARTUUID="009bd4af-01"
/dev/loop0: TYPE="squashfs"
/dev/sda7: UUID="15ad6375-7463-4154-9eff-482359f7f43f" TYPE="swap" PARTUUID="0001ae1e-07"
/dev/zram0: UUID="8c91b757-3051-4e82-9c9f-7e4644bbc902" TYPE="swap"
/dev/zram1: UUID="0680a829-e12f-425b-8928-3ffe4e7637d0" TYPE="swap"
/dev/zram2: UUID="654155dd-99f3-4da8-b2d8-8c860018a104" TYPE="swap"
/dev/zram3: UUID="2881c7b8-2b38-4835-adae-a684c5bc610f" TYPE="swap"
/dev/zram4: UUID="31792ccf-1f7f-43c3-928b-a3cd655825df" TYPE="swap"
/dev/zram5: UUID="27b2ab6d-6de5-4db5-9db9-4aaf6ac0ebfd" TYPE="swap"
/dev/zram6: UUID="8b82d5fe-c9ab-4bd4-9527-e5395e07e7c5" TYPE="swap"
/dev/zram7: UUID="e0c946f2-4b6e-41c6-9a93-0b20ea31841c" TYPE="swap"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda2.
=================== sda5/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jan 6 00:07 grub.d
total 80
-rwxr-xr-x 1 root root 9783 Oct 12 13:41 00_header
-rwxr-xr-x 1 root root 6258 Apr 24 2017 05_debian_theme
-rwxr-xr-x 1 root root 12676 Oct 12 13:41 10_linux
-rwxr-xr-x 1 root root 11281 Oct 12 13:41 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Oct 12 13:41 30_os-prober
-rwxr-xr-x 1 root root 1418 Oct 12 13:41 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Oct 12 13:41 40_custom
-rwxr-xr-x 1 root root 216 Oct 12 13:41 41_custom
-rw-r--r-- 1 root root 483 Oct 12 13:41 README
=================== sda5/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda2.
sda5 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda5.
sda6 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda6.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:640GB:scsi:512:512:msdos:ATA SAMSUNG HM640JJ:;
1:1049kB:525MB:524MB:ntfs::boot;
2:525MB:614GB:613GB:ntfs::;
3:614GB:640GB:26.2GB:::;
5:614GB:626GB:12.0GB:ext4::;
6:626GB:638GB:12.0GB:ext4::;
7:638GB:640GB:2215MB:linux-swap(v1)::;
BYT;
/dev/sdb:15.6GB:scsi:512:512:msdos:SanDisk Ultra:;
1:1049kB:15.6GB:15.6GB:fat32::boot, lba;
BYT;
/dev/zram7:386MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:386MB:386MB:linux-swap(v1)::;
BYT;
/dev/zram5:386MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:386MB:386MB:linux-swap(v1)::;
BYT;
/dev/zram3:386MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:386MB:386MB:linux-swap(v1)::;
BYT;
/dev/zram1:386MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:386MB:386MB:linux-swap(v1)::;
BYT;
/dev/zram6:386MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:386MB:386MB:linux-swap(v1)::;
BYT;
/dev/zram4:386MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:386MB:386MB:linux-swap(v1)::;
BYT;
/dev/zram2:386MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:386MB:386MB:linux-swap(v1)::;
BYT;
/dev/zram0:386MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:386MB:386MB:linux-swap(v1)::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 629.3M
sda disk 596.2G
sda1 part ntfs 500M Réservé au système
sda2 part ntfs 571.3G
sda3 part 1K
sda5 part ext4 11.2G
sda6 part ext4 11.2G
sda7 part swap 2.1G
sdb disk 14.5G
sdb1 part vfat 14.5G LUBUNTU 17_
sr0 rom 1024M
zram0 disk 368.6M
zram1 disk 368.6M
zram2 disk 368.6M
zram3 disk 368.6M
zram4 disk 368.6M
zram5 disk 368.6M
zram6 disk 368.6M
zram7 disk 368.6M
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda5 1 0 0 /mnt/boot-sav/sda5
sda6 1 0 0 /mnt/boot-sav/sda6
sda7 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
zram0 0 0 0 [SWAP]
zram1 0 0 0 [SWAP]
zram2 0 0 0 [SWAP]
zram3 0 0 0 [SWAP]
zram4 0 0 0 [SWAP]
zram5 0 0 0 [SWAP]
zram6 0 0 0 [SWAP]
zram7 0 0 0 [SWAP]
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=2991864k,nr_inodes=747966,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=603812k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14150)
configfs on /sys/kernel/config type configfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=603808k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw,relatime,data=ordered)
/dev/sda6 on /mnt/boot-sav/sda6 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd freefall full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sda7 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 9f 0f 00 00 00 00 00 |................|
00000030 aa a6 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 d5 37 ab 08 46 ab 08 82 |.........7..F...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 0f 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 8f 68 47 00 00 00 00 |..........hG....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 ad ff b1 ba 17 b2 ba 8a |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 2.9G 0 2.9G 0% /dev
tmpfs tmpfs 590M 8.9M 581M 2% /run
/dev/sdb1 vfat 15G 767M 14G 6% /cdrom
/dev/loop0 squashfs 630M 630M 0 100% /rofs
/cow overlay 2.9G 5.0M 2.9G 1% /
tmpfs tmpfs 2.9G 0 2.9G 0% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 2.9G 0 2.9G 0% /sys/fs/cgroup
tmpfs tmpfs 2.9G 4.0K 2.9G 1% /tmp
tmpfs tmpfs 590M 4.0K 590M 1% /run/user/999
/dev/sda1 fuseblk 500M 334M 167M 67% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 572G 79G 494G 14% /mnt/boot-sav/sda2
/dev/sda5 ext4 11G 3.1G 7.3G 30% /mnt/boot-sav/sda5
/dev/sda6 ext4 11G 702M 9.7G 7% /mnt/boot-sav/sda6
=================== fdisk -l:
Disk /dev/loop0: 629.3 MiB, 659873792 bytes, 1288816 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 596.2 GiB, 640135028736 bytes, 1250263728 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0001ae1e
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 1026047 1024000 500M 7 HPFS/NTFS/exFAT
/dev/sda2 1026048 1199060991 1198034944 571.3G 7 HPFS/NTFS/exFAT
/dev/sda3 1199063038 1250263039 51200002 24.4G 5 Extended
/dev/sda5 1199063040 1222498303 23435264 11.2G 83 Linux
/dev/sda6 1222500352 1245935615 23435264 11.2G 83 Linux
/dev/sda7 1245937664 1250263039 4325376 2.1G 82 Linux swap / Solaris
Disk /dev/sdb: 14.5 GiB, 15597568000 bytes, 30464000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x009bd4af
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 30463999 30461952 14.5G c W95 FAT32 (LBA)
Disk /dev/zram0: 368.6 MiB, 386441216 bytes, 94346 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram1: 368.6 MiB, 386441216 bytes, 94346 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram2: 368.6 MiB, 386441216 bytes, 94346 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram3: 368.6 MiB, 386441216 bytes, 94346 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram4: 368.6 MiB, 386441216 bytes, 94346 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram5: 368.6 MiB, 386441216 bytes, 94346 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram6: 368.6 MiB, 386441216 bytes, 94346 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/zram7: 368.6 MiB, 386441216 bytes, 94346 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
ping: google.com: Temporary failure in name resolution
=================== Recommended repair
The default repair of the Boot-Repair utility will reinstall the grub2 of sda5 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s fix-windows-boot
Quantity of real Windows: 1
WinSE in sda2
Copied Win boot files from sda1 to sda2
chroot: failed to run command ‘lspci’: Input/output error
*******lspci -nnk | grep -iA3 vga
*******
grub-install --version
chroot: failed to run command ‘grub-install’: Input/output error
,.
Reinstall the GRUB of sda5 into the MBR of sda
chroot: failed to run command 'grub-install': Input/output error
grub-install /dev/sda: exit code of grub-install /dev/sda:126
Failed to run command grub-install detected.
chroot: failed to run command ‘type’: No such file or directory
-rwxr-xr-x 1 root root 1023432 Oct 12 13:41 /mnt/boot-sav/sda5/usr/sbin/grub-install
-rwxr-xr-x 1 root root 1023432 Oct 12 13:41 /mnt/boot-sav/sda5/usr/sbin/grub-install
chroot: failed to run command 'grub-install': Input/output error
grub-install /dev/sda: exit code of grub-install /dev/sda:126
---- Grub-install verbose
chroot: failed to run command 'sh': Input/output error
--------
/usr/sbin/grub-install /dev/sda: exit code of grub-install /dev/sda:126
---- End of grub-install verbose
chroot /mnt/boot-sav/sda5 update-grub
chroot: failed to run command 'update-grub': Input/output error
Unhide GRUB boot menu in sda5/boot/grub/grub.cfg
An error occurred during the repair.
You can now reboot your computer.
The boot files of ubuntu 17.10 are far from the start of the disk.
You may want to retry after creating a /boot partition (EXT4, >200MB,
start from the disk). This can be performed via tools such as gParted.
Then select this partition via the [Separate /bootpartition:] option of
(Boot repair). [url]http://help.ubuntu.com/comunity/bootpartition)[/url]Modération : merci d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 19/03/2018, à 12:01)
Hors ligne
#2 Le 19/03/2018, à 16:43
- lucmars
Re : Grub error + error boot-repair - lubuntu/win10 double boot
C'est p'tete la version de boot-repair qui déconne, ou bien il se casse les dents relativement à l'état de ton disque.
Gaulois Matter !
Hors ligne
#3 Le 19/03/2018, à 17:37
- ??
Re : Grub error + error boot-repair - lubuntu/win10 double boot
Bonjour
Le plus simple est d'utiliser ton support d'installation, d'y installer gsmartctl et de fournir au forum un état du disque SDA paragraphes 1 et 3.1 car il y a des messages d'erreur "Input/output error"
Dernière modification par ?? (Le 19/03/2018, à 17:45)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#4 Le 19/03/2018, à 22:18
- simonbref
Re : Grub error + error boot-repair - lubuntu/win10 double boot
Merci à vous deux.
Hélas, je n'arrive pas à "installer" smartmontools sur ma clef usb et lancer mon linux/windows dessus.
Je n'ai trouvé que cette version ici à télécharger mais c'est un dossier avec des sous dossier, quand je les mets sur la clef, ça ne la rend pas bootable/utilisable sur le pc qui pose probleme : https://sourceforge.net/projects/smartlinux/
Avec mes connaissance très faibles, je ne sais booter que via une image iso sur la clef + netbootin.
J'arrive à allumer le pc via boot-repair (iso), mais quand je tappe ensuite dans le terminal "sudo apt-get install smartmontools ", il me demande ensuite yes/or no pour continuer l'install et à la fin un écran gris (dans le terminal) avec marqué choose configuration avec différents choix, -ok- marqué en bas, et impossibilité de faire quoi que ce soit. J'ai essayer de le telecharger via les paquets, mais ça n'y fait rien...
Et quand je tente direct : "sudo smartctl -a /dev/sda", j'ai plein d'options qui s'affichent, rien à voir avec les paragraphes que tu me demandes (=== START OF INFORMATION SECTION === étant le premier paragraphe dont tu as besoin... mais y'a rien de tout ça).
Désolé, je suis néophyte avec linux et totalement perdu. Merci d'avance.
Dernière modification par simonbref (Le 19/03/2018, à 22:23)
Hors ligne
#5 Le 19/03/2018, à 22:36
- ??
Re : Grub error + error boot-repair - lubuntu/win10 double boot
Essaies d'installer avec cette commande
sudo apt-get install --no-install-recommends smartmontools Dernière modification par ?? (Le 19/03/2018, à 22:37)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#6 Le 20/03/2018, à 10:11
- simonbref
Re : Grub error + error boot-repair - lubuntu/win10 double boot
J'ai réussi avec ton script 
Voilà le résultat :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-16-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint MP5
Device Model: SAMSUNG HM640JJ
Serial Number: S2AQJ1RZA00743
LU WWN Device Id: 5 0024e9 0043c93ca
Firmware Version: 2AK10001
User Capacity: 640,135,028,736 bytes [640 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Mar 20 07:54:30 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 7620) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 127) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail
Always FAILING_NOW 68184
2 Throughput_Performance 0x0026 252 252 000 Old_age
Always - 0
3 Spin_Up_Time 0x0023 089 085 025 Pre-fail
Always - 3489
4 Start_Stop_Count 0x0032 092 092 000 Old_age
Always - 8504
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age
Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age
Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 9699
10 Spin_Retry_Count 0x0032 252 252 051 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 099 099 000 Old_age
Always - 1358
12 Power_Cycle_Count 0x0032 094 094 000 Old_age
Always - 6859
13 Read_Soft_Error_Rate 0x003a 100 100 000 Old_age
Always - 0
191 G-Sense_Error_Rate 0x0022 090 090 000 Old_age
Always - 105663
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age
Always - 0
193 Load_Cycle_Count 0x0032 085 085 000 Old_age
Always - 153941
194 Temperature_Celsius 0x0002 064 051 000 Old_age
Always - 21 (Min/Max 9/49)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age
Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 096 096 000 Old_age
Always - 354
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age
Always - 2242
240 Head_Flying_Hours 0x0032 100 100 000 Old_age
Always - 9656
241 Total_LBAs_Written 0x0032 099 088 000 Old_age
Always - 1795807
242 Total_LBAs_Read 0x0032 099 088 000 Old_age
Always - 1366322
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age
Always - 21
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 9230
309596922
# 2 Short offline Interrupted (host reset) 90% 9002 -
# 3 Short offline Interrupted (host reset) 90% 8983 -
# 4 Short offline Interrupted (host reset) 90% 8958 -
# 5 Short offline Interrupted (host reset) 90% 8568 -
# 6 Short offline Completed without error 00% 8490 -
# 7 Short offline Interrupted (host reset) 90% 8486 -
# 8 Short offline Completed without error 00% 8425 -
# 9 Short offline Completed without error 00% 8317 -
#10 Short offline Interrupted (host reset) 90% 8277 -
#11 Short offline Interrupted (host reset) 90% 8149 -
#12 Short offline Completed without error 00% 8101 -
#13 Short offline Completed without error 00% 8061 -
#14 Short offline Completed without error 00% 7984 -
#15 Short offline Completed without error 00% 7922 -
#16 Short offline Completed without error 00% 7762 -
#17 Short offline Interrupted (host reset) 90% 7753 -
#18 Short offline Completed without error 00% 7589 -
#19 Short offline Completed without error 00% 7422 -
#20 Short offline Completed without error 00% 7210 -
#21 Short offline Completed without error 00% 7098 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has
ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Merci
Hors ligne
#7 Le 20/03/2018, à 10:30
- ??
Re : Grub error + error boot-repair - lubuntu/win10 double boot
Bonjour.
Achètes un nouveau disque. Le tien va bientôt lâcher.
1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail
Always FAILING_NOW 68184Indique le taux d’erreur matérielle lors de la lecture de la surface du disque. Une valeur élevée indique un problème soit avec la surface du disque, soit avec les têtes de lecture/écriture.
Il y a tout lieu de penser que ce sont les têtes de lecture car aucun secteur illisible n'a été enregistré.
Il est probable que ce disque a trop été secoué dans sa brève vie.
191 G-Sense_Error_Rate 0x0022 090 090 000 Old_age
Always - 105663Dernière modification par ?? (Le 20/03/2018, à 10:34)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#8 Le 20/03/2018, à 11:40
- simonbref
Re : Grub error + error boot-repair - lubuntu/win10 double boot
Ok je m'en doutais.
Merci pour ton aide précieuse.
C'est un beau cadeau que tu fais aux internautes néophytes
A plus (j'espère pas trop vite !)
Hors ligne