Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 09/05/2018, à 04:44

Compte anonymisé

[Résolu] Ubuntu compatible avec ma machine ?

Bonjour à tous,

Je viens de faire l'acquisition d'un nouvel ordinateur portable. Bon actuellement il tourne sous Windows 10 mais j'aimerai le passer sous Ubuntu 18.04 LTS.  J'ai rapidement faire le tour des environnements (XFCE, Budgie, Cinnamon, KDE, Gnome) et j'aimerai que vous me disiez lequel est le meilleur pour débuter sous Linux ? J'aimerai également savoir si selon vous Ubuntu est conseillé avec ma configuration ou si je dois me tourner vers une autre distribution plus légère ?

Modèle de mon notebook : Lenovo Ideapad 110-17ISK

- HardDisk : 1 To → SSD 230 Go (SSD pas d'origine, j'ai demandé à le faire monter à la place du HDD qui était à l'intérieur)
- RAM : 6144 Mo
- Processeur : Intel i3 6006U ← (merci Malbo pour la précision)

(Je ne sais pas si le reste est intéressant donc je ne l'indique pas si besoin demandez)

Merci à vous.

Dernière modification par Compte anonymisé (Le 10/05/2018, à 13:53)

#2 Le 09/05/2018, à 05:49

Compte anonymisé

Re : [Résolu] Ubuntu compatible avec ma machine ?

Mise à jour du sujet :

Je viens d'installer la distribution Ubuntu 18.04 avec l'environnement Gnome, pour le moment le système à l'air de bien tourner j'avais un peu peur coté performance vu le prix du PC qui est une entrée de gamme mais finalement ça va ! L'installation s'est bien déroulé et aucun problème à déplorer.

#3 Le 09/05/2018, à 06:11

malbo

Re : [Résolu] Ubuntu compatible avec ma machine ?

Bonjour,
Je souhaite ajouter ton modèle d'ordi dans la Liste des portables « Lenovo ». Je te prie de confirmer que ton processeur est bien un Intel Core i3-6006U. D'autre part, ce serait utile que tu fasses un Boot-Info depuis une session de ton Ubuntu 18.04 fraîchement installé en suivant les indications de la partie Cas où au moins un ubuntu installé sur disque est opérationnel du paragraphe 1.1 Installation, puis que tu lances Boot-Info suivant 1.2 Utilisation et que tu donnes l'URL de ce Boot-Info dans ta réponse. Cela donnera un exemple d'installation réussie dans ce modèle.

Hors ligne

#4 Le 09/05/2018, à 12:36

Compte anonymisé

Re : [Résolu] Ubuntu compatible avec ma machine ?

Salut Malbo,

Concernant le processeur je te confirme le modèle c'est bien celui-ci. Voici le lien : http://paste.ubuntu.com/p/cdkjpRwy8r/

Pourrais-tu regarder si tout est correct et si mon système est sein ?

D'avance merci

#5 Le 09/05/2018, à 13:29

malbo

Re : [Résolu] Ubuntu compatible avec ma machine ?

Ton Boot-Info est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Windows 7/8/2012 is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi 
                       /EFI/debian/grubx64.efi /EFI/ubuntu/fwupx64.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi 
                       /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 223.6 GiB, 240065183744 bytes, 468877312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   468,877,311   468,877,311  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624   468,875,263   467,824,640 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop10                                             squashfs   
/dev/loop11                                             squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/loop8                                              squashfs   
/dev/loop9                                              squashfs   
/dev/sda1        985E-21EF                              vfat       
/dev/sda2        84e3d172-8df1-4282-bada-33b37663c63b   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 May  9 13:33 ata-SanDisk_SSD_PLUS_240_GB_174806A0029D -> ../../sda
lrwxrwxrwx 1 root root 10 May  9 13:33 ata-SanDisk_SSD_PLUS_240_GB_174806A0029D-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May  9 13:33 ata-SanDisk_SSD_PLUS_240_GB_174806A0029D-part2 -> ../../sda2
lrwxrwxrwx 1 root root  9 May  9 13:33 wwn-0x5001b448b686a7dd -> ../../sda
lrwxrwxrwx 1 root root 10 May  9 13:33 wwn-0x5001b448b686a7dd-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May  9 13:33 wwn-0x5001b448b686a7dd-part2 -> ../../sda2

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


========================== sda1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 84e3d172-8df1-4282-bada-33b37663c63b root hd0,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  84e3d172-8df1-4282-bada-33b37663c63b
else
  search --no-floppy --fs-uuid --set=root 84e3d172-8df1-4282-bada-33b37663c63b
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_BE
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-84e3d172-8df1-4282-bada-33b37663c63b' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  84e3d172-8df1-4282-bada-33b37663c63b
	else
	  search --no-floppy --fs-uuid --set=root 84e3d172-8df1-4282-bada-33b37663c63b
	fi
        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=84e3d172-8df1-4282-bada-33b37663c63b ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-20-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-84e3d172-8df1-4282-bada-33b37663c63b' {
	menuentry 'Ubuntu, avec Linux 4.15.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-advanced-84e3d172-8df1-4282-bada-33b37663c63b' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  84e3d172-8df1-4282-bada-33b37663c63b
		else
		  search --no-floppy --fs-uuid --set=root 84e3d172-8df1-4282-bada-33b37663c63b
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=84e3d172-8df1-4282-bada-33b37663c63b ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-20-generic-recovery-84e3d172-8df1-4282-bada-33b37663c63b' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  84e3d172-8df1-4282-bada-33b37663c63b
		else
		  search --no-floppy --fs-uuid --set=root 84e3d172-8df1-4282-bada-33b37663c63b
		fi
		echo	'Chargement de Linux 4.15.0-20-generic…'
	        linux	/boot/vmlinuz-4.15.0-20-generic root=UUID=84e3d172-8df1-4282-bada-33b37663c63b ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-20-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=84e3d172-8df1-4282-bada-33b37663c63b /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=985E-21EF  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 112.649456024 = 120.956432384  boot/grub/grub.cfg                             2
 112.641815186 = 120.948228096  boot/vmlinuz-4.15.0-20-generic                 1
 112.641815186 = 120.948228096  vmlinuz                                        1
   5.144741058 = 5.524123648    boot/initrd.img-4.15.0-20-generic              3
   5.144741058 = 5.524123648    initrd.img                                     3


ADDITIONAL INFORMATION :
=================== log of boot-info 20180509_1333 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-20-generic root=UUID=84e3d172-8df1-4282-bada-33b37663c63b ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 18.04 LTS CurrentSession:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="985E-21EF" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="89a63202-6941-4eab-aeb8-77006ea2b668"
/dev/sda2: UUID="84e3d172-8df1-4282-bada-33b37663c63b" TYPE="ext4" PARTUUID="92fa4c37-540f-4012-88f9-e3922a6f6fde"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 avr 26 20:23 grub.d
total 80
-rwxr-xr-x 1 root root  9783 mar  4 14:11 00_header
-rwxr-xr-x 1 root root  6258 mar  4 14:11 05_debian_theme
-rwxr-xr-x 1 root root 12693 mar  4 14:11 10_linux
-rwxr-xr-x 1 root root 11298 mar  4 14:11 20_linux_xen
-rwxr-xr-x 1 root root  1992 jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mar  4 14:11 30_os-prober
-rwxr-xr-x 1 root root  1418 mar  4 14:11 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mar  4 14:11 40_custom
-rwxr-xr-x 1 root root   216 mar  4 14:11 41_custom
-rw-r--r-- 1 root root   483 mar  4 14:11 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=985E-21EF   (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : command substitution: ignored null byte in input

=================== efibootmgr -v
BootCurrent: 0005
Timeout: 0 seconds
BootOrder: 0005,2003,2001,2002
Boot0001* EFI Network 0 for IPv4 (54-E1-AD-00-A8-B0) 	PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)/MAC(54e1ad00a8b0,0)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot0002* EFI Network 0 for IPv6 (54-E1-AD-00-A8-B0) 	PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)/MAC(54e1ad00a8b0,0)/IPv6([::]:<->[::]:,0,0)RC
Boot0005* ubuntu	HD(1,GPT,89a63202-6941-4eab-aeb8-77006ea2b668,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0007* EFI Network 0 for IPv6 (54-E1-AD-00-A8-B0) 	PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)/MAC(54e1ad00a8b0,0)/IPv6([::]:<->[::]:,0,0)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /boot/efi.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:240GB:scsi:512:512:gpt:ATA SanDisk SSD PLUS:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:240GB:240GB:ext4::;

=================== lsblk:
KNAME  TYPE FSTYPE     SIZE LABEL
loop0  loop squashfs  86,6M
loop1  loop squashfs   3,3M
loop2  loop squashfs  12,2M
loop3  loop squashfs   140M
loop4  loop squashfs    21M
loop5  loop squashfs   1,6M
loop6  loop squashfs  86,6M
loop7  loop squashfs   3,7M
loop8  loop squashfs   2,3M
loop9  loop squashfs  21,6M
loop10 loop squashfs   140M
loop11 loop squashfs    13M
sda    disk          223,6G
sda1   part vfat       512M
sda2   part ext4     223,1G

KNAME  ROTA RO RM STATE   MOUNTPOINT
loop0     1  1  0         /snap/core/4486
loop1     1  1  0         /snap/gnome-system-monitor/36
loop2     1  1  0         /snap/gnome-characters/69
loop3     1  1  0         /snap/gnome-3-26-1604/59
loop4     1  1  0         /snap/gnome-logs/25
loop5     1  1  0         /snap/gnome-calculator/154
loop6     1  1  0         /snap/core/4571
loop7     1  1  0         /snap/gnome-system-monitor/39
loop8     1  1  0         /snap/gnome-calculator/167
loop9     1  1  0         /snap/gnome-logs/31
loop10    1  1  0         /snap/gnome-3-26-1604/62
loop11    1  1  0         /snap/gnome-characters/86
sda       0  0  0 running
sda1      0  0  0         /boot/efi
sda2      0  0  0         /


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=2971260k,nr_inodes=742815,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=600132k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=36,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=466)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/var/lib/snapd/snaps/core_4486.snap on /snap/core/4486 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_36.snap on /snap/gnome-system-monitor/36 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_69.snap on /snap/gnome-characters/69 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_59.snap on /snap/gnome-3-26-1604/59 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_25.snap on /snap/gnome-logs/25 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_154.snap on /snap/gnome-calculator/154 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=600128k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/var/lib/snapd/snaps/core_4571.snap on /snap/core/4571 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_39.snap on /snap/gnome-system-monitor/39 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_167.snap on /snap/gnome-calculator/167 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_31.snap on /snap/gnome-logs/31 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_62.snap on /snap/gnome-3-26-1604/62 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_86.snap on /snap/gnome-characters/86 type squashfs (ro,nodev,relatime,x-gdu.hide)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 00 04 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 ef 21 5e 98 4e  4f 20 4e 41 4d 45 20 20  |..).!^.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.9G     0  2.9G   0% /dev
tmpfs          tmpfs     587M  1.7M  585M   1% /run
/dev/sda2      ext4      219G  7.0G  201G   4% /
tmpfs          tmpfs     2.9G   41M  2.9G   2% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.9G     0  2.9G   0% /sys/fs/cgroup
/dev/loop0     squashfs   87M   87M     0 100% /snap/core/4486
/dev/loop1     squashfs  3.4M  3.4M     0 100% /snap/gnome-system-monitor/36
/dev/loop2     squashfs   13M   13M     0 100% /snap/gnome-characters/69
/dev/loop3     squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/59
/dev/loop4     squashfs   21M   21M     0 100% /snap/gnome-logs/25
/dev/loop5     squashfs  1.7M  1.7M     0 100% /snap/gnome-calculator/154
/dev/sda1      vfat      511M   12M  500M   3% /boot/efi
tmpfs          tmpfs     587M   24K  587M   1% /run/user/1000
/dev/loop6     squashfs   87M   87M     0 100% /snap/core/4571
/dev/loop7     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/39
/dev/loop8     squashfs  2.4M  2.4M     0 100% /snap/gnome-calculator/167
/dev/loop9     squashfs   22M   22M     0 100% /snap/gnome-logs/31
/dev/loop10    squashfs  141M  141M     0 100% /snap/gnome-3-26-1604/62
/dev/loop11    squashfs   13M   13M     0 100% /snap/gnome-characters/86

=================== fdisk -l:
Disk /dev/loop0: 86.6 MiB, 90759168 bytes, 177264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 3.3 MiB, 3411968 bytes, 6664 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 12.2 MiB, 12804096 bytes, 25008 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 21 MiB, 22003712 bytes, 42976 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 1.6 MiB, 1691648 bytes, 3304 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 86.6 MiB, 90828800 bytes, 177400 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 3.7 MiB, 3813376 bytes, 7448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 223.6 GiB, 240065183744 bytes, 468877312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 6E30E74A-145E-4BA2-B6A9-8B1135DF2285

Device       Start       End   Sectors   Size Type
/dev/sda1     2048   1050623   1048576   512M EFI System
/dev/sda2  1050624 468875263 467824640 223.1G Linux filesystem


Disk /dev/loop8: 2.3 MiB, 2428928 bytes, 4744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop9: 21.6 MiB, 22609920 bytes, 44160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop10: 140 MiB, 146841600 bytes, 286800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop11: 13 MiB, 13594624 bytes, 26552 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !


=================== User settings
The settings chosen by the user will not act on the boot.

A mon avis, ton installation est parfaite. Je pensais que tu avais conservé Windows 10 or je constate qu'il s'est fait virer. Mais c'est vrai qu'avec ton SSD de petit taille, il vaut mieux virer Windows qui est un gros mangeur de Go afin de garder le maximum de place pour le stockage de tes données.

EDIT : je viens d'ajouter ton modèle Lenovo Ideapad 110-17ISK dans la Liste des portables « Lenovo ».
Pour mémoire, ce modèle est équipé d'un processeur Intel Core i3-6006U. La partie graphique Intel HD 520 se trouve sur la même puce que le processeur. Il n'y a pas de carte graphique dédiée. Comme on peut voir dans le post #1, le disque dur d'origine de 1 To a été remplacé par un SSD (d'après le Boot-Info, il s'agit d'un Sandisk SSD Plus 240 Go)

Dernière modification par malbo (Le 09/05/2018, à 13:48)

Hors ligne

#6 Le 09/05/2018, à 17:11

Compte anonymisé

Re : [Résolu] Ubuntu compatible avec ma machine ?

C'est cool alors pour l'installation. Après avoir passé dix ans exclusivement sous Windows je voulais essayer un système nouveau. Un ami m'a parlé de Debian et d'Ubuntu, d'ailleurs tant que tu es là j'ai essayé plusieurs choses en dur (en installant sur le SSD) notamment une distribution Debian: c'était assez jolie niveau graphisme MAIS je me suis rendu compte qu'il fallait très vite mettre les mains dans les fichiers et honnêtement pour le moment je ne m'en sens pas capable.
J'ai rapidement vu la méthode de versions proposés (stable testing instable) et là non plus ce n'était pas à mon goût en revanche je trouve cool le système épuré et totalement libre du système l'idée est révolutionnaire et mérite d'être utilisé ! J'ai également testé une Xubuntu et là c'était jolie mais j'avais également envie d'essayer Gnome donc j'ai mis Ubuntu de base. Ma question est comment enlever les résidus de ces deux systèmes ?

Ok donc de là les gens pourront savoir si ils ont le même PC que moi que ce modèle fonctionne ? Est-ce que je peux faire autre chose pour les utilisateurs concernant ma machine ? Toutes les infos que tu me donnes sur le matériels sont correctes !

#7 Le 09/05/2018, à 17:17

malbo

Re : [Résolu] Ubuntu compatible avec ma machine ?

Dans le Boot-Info que j'ai collé dans le post #5, je vois un résidu de Debian dans sda1 mais il n'y a aucun intérêt à virer ça. A mon avis, tu n'as pas de ménage à faire.

Hors ligne

#8 Le 09/05/2018, à 18:14

Compte anonymisé

Re : [Résolu] Ubuntu compatible avec ma machine ?

D'accord et bien tout est bon ! Merci pour ta participation à ce sujet et à bientot sur le forum.

#9 Le 10/05/2018, à 06:16

malbo

Re : [Résolu] Ubuntu compatible avec ma machine ?

Bonjour,
Je te prie de passer cette discussion en "résolu" pour tenter d'éviter les squatters. Pour cela, tu peux suivre cette procédure :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :

[Résolu] Ubuntu compatible avec ma machine ?

Hors ligne