#51 Le 07/08/2018, à 10:55
- ??
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Bonjour.
au lieu d'installer nomodeset, bootes en prenant le choix mode avancé puis le choix recovery.
Cette technique inclut l'option nomodeset. Mets alors à jour le logiciel
sudo apt update
sudo apt upgrade
puis regardes si tu as une proposition de pilote propriétaire.
https://doc.ubuntu-fr.org/gestionnaire_ … prietaires
J'ai retenu que c'est la solution de parcourir harddisk drive BBS qui a permit de résoudre le problème et Probablement pas la mise à jour du bios
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; MSI BIOS Release Notes ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Model : MS-16JB (KBL)
MKT Name : GE62VR 7RF/ GP62MVR 7RF/ GP62VR 7RF / GP62MVR 7RFX / PE62VR 7RF/
GL62VR 7RFX/ GF62VR 7RF/ GV62VR 7RF;****************************************************************************;
New BIOS : E16JBIMS.319
ROM CheckSum : 8504H
Release Date : 2018/05/22;--------------------------- Description ------------------------------------;
1. Add progress bar function during windows firmware update.
;****************************************************************************;
New BIOS : E16JBIMS.317
ROM CheckSum : A3B1H
Release Date : 2018/03/13;--------------------------- Description ------------------------------------;
1. Update CPU microcode 0x84 for Intel-SA-00088 (Meltdown & Spectre) speculative execution side-channel vulnerabilities .
;****************************************************************************;
New BIOS : E16JBIMS.313
ROM CheckSum : AFF2H
Release Date:2017/11/7;--------------------------- Description ------------------------------------;
1. Fix an issue that cannot boot to DOS.
2. Fix an issue that Bios update information cannot be recorded correctly after flashing BIOS.
3. Update Microcode to optimize Windows system.;****************************************************************************;
New BIOS : E16JBIMS.312
ROM CheckSum : 7E1AH
Release Date:2017/10/24;--------------------------- Description ------------------------------------;
1. Fix the C7 issue of HDD.
;****************************************************************************;
New BIOS : E16JBIMS.310
ROM CheckSum : ED8CH
Release Date:2017/08/10;--------------------------- Description ------------------------------------;
1. Update microcode to fix an issue about CPU.
;****************************************************************************;
New BIOS : E16JBIMS.30F
ROM CheckSum : E80AH
Release Date:2017/06/29;--------------------------- Description ------------------------------------;
1. Add support on GL series.
;****************************************************************************;
New BIOS : E16JBIMS.30E
ROM CheckSum : 43F7H
Release Date:2017/06/12;--------------------------- Description ------------------------------------;
1. Add support on PE series.
;****************************************************************************;
New BIOS : E16JBIMS.30D
ROM CheckSum : 263DH
Release Date:2017/05/15;--------------------------- Description ------------------------------------;
1. Fix BIOS Real-time clock's time is not correct.
2. Fix key in latency with USB keyboard connect through USB hub on USB 3.1 port.
;****************************************************************************;
New BIOS : E16JBIMS.30C
ROM CheckSum : 8984H
Release Date:2017/04/13;--------------------------- Description ------------------------------------;
1. Modify BIOS SMBIOS string.
;****************************************************************************;
New BIOS : E16JBIMS.30B
ROM CheckSum : 51A1H
Release Date:2017/03/20;--------------------------- Description ------------------------------------;
1. Support E2400 killer lan for GE62VR/GP62MVR/GP62VR.
2. Support new GP62M model.
;****************************************************************************;
New BIOS : E16JBIMS.30A
ROM CheckSum : FE7FH
Release Date:2017/01/12;--------------------------- Description ------------------------------------;
1. Fix driver lose problem after exit F3 recovery environment.
2. Fix the system would show "media present" and crash if use F12 boot from LAN function without plug in LAN cable.
;****************************************************************************;
New BIOS : E16JBIMS.308
ROM CheckSum : C25DH
Release Date:2017/01/06;--------------------------- Description ------------------------------------;
First Release.
Dernière modification par ?? (Le 07/08/2018, à 11:34)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#52 Le 07/08/2018, à 17:53
- Regularboi
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Salut Regularboi,
Regularboi a écrit :Et je crois avoir oublié de le préciser plus haut mais j'ai mis à jour mon BIOS.
Cette opération est la plus risquée de toutes. Pour toutes les autres, il y a toujours moyen de réinstaller à partir d'un support d'installation. C'est la seule où tu peux rendre un pc inopérant si ça foire, ça touche directement la flash de la carte mère. C'est à faire en dernier recours, dans le cas de certains bugs. Les moyens pour se récupérer quand le flash du bios plante sont soit très complexes, soit inexistants.
A quel moment as tu mis à jour ton BIOS? (je cherche à savoir si ça a eu un impact pour débloquer la situation)
J'ai mis à jour mon BIOS juste après le message #45 je n'étais pas vraiment au courant que la manipulation était risquée je suis allé me documenter sur le site de MSI et sur un autre site et j'ai suivi les consignes il n'y a eu aucun problème.
La solution :
1. Aller dans le BIOS en utilisant la touche suppr
2. Désactiver le fast boot
3. Laisser le secure boot activé (pour ma part je l'ai laissé en standard)
4.Sélectionner l'option pour boot depuis une clé usb ou depuis le lecteur de cd
5. F10 pour sauvegarder les paramètres
6. Echap pour quitter le bios
7. Démarrer Windows et faire des partitions pour Ubuntu (pour ma part c'était déjà fait)
8. Booter sur Ubuntu puis l'installer
9. Après l'installation redémarrer le PC dans mon cas j'ai laissé mon média d'installation mais je suppose qu'il a été éjecté à la fin de l'installation puisque mon PC a directement booté
sur Windows alors que la clé USB était encore insérée.
10. Je l'ai donc débranchée puis rebranchée et j'ai redémarré mon PC
11. Je suis arrivé sur le menu d'installation de Ubuntu comme indiqué sur le tutoriel Anglais d'après ce que j'ai compris à ce moment la on est censé retirer son media ce qui va faire un
écran blanc ou un freeze mais chez moi il n'y a rien eu le menu était encore fonctionnel je ne pouvais juste pas lancer de session live ou installer Ubuntu.
12. J'ai donc redémmaré mon PC et je suis allé dans le BIOS (c'était l'étape suivante indiquée sur le tutoriel en anglais)
13. J'ai sélectionné Select UEFI Hard disk drive BBS Priorities et choisi Ubuntu en 1er OS j'ai ensuite sauvegardé et redémarré puis le BIOS est apparu j'ai pu booter sur Windows et
Ubuntu.
Je compte réessayer toutes ces étapes sur un ordinateur identique au mien qu'un ami va acheter je posterai ici le retour pour vous indiquer si cela a fonctionné ou pas.
Cependant le problème des freeze est toujours d'actualité j'ai essayé cette solution :
Le problème de freeze est secondaire, il est lié à ta carte graphique qui n'est pas bien supportée par le driver libre nouveau. Essaie de booter avec nomodeset passé au grub. Si tu y arrives, tu installes tout de suite le driver de la carte graphique nVidia. Pour ça, tu vas dans Gestionnaire de Mise à jour, Paramètres et Pilotes additionnels.
Si tu n'y arrives pas, essaie avec modprobe.blacklist=nouveau. Si tu n'y arrives toujours pas, fais le savoir.
Puis celle ci:
Bonjour.
au lieu d'installer nomodeset, bootes en prenant le choix mode avancé puis le choix recovery.
Cette technique inclut l'option nomodeset. Mets alors à jour le logicielsudo apt update sudo apt upgrade
puis regardes si tu as une proposition de pilote propriétaire.
https://doc.ubuntu-fr.org/gestionnaire_ … prietaires
Il y avait deux chois de pilote j'ai donc choisi celui qui n'était pas sélectionné mais Ubuntu lancé en mode normal à quand même freeze. Je vous enverrai des screens des choix plus tard dans la soirée car je ne serais pas disponible.
Hors ligne
#53 Le 07/08/2018, à 18:09
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Bonjour,
OK. Fais une photo des choix de driver qui te sont proposés. Il faut choisir le nVidia tested (probablement le 390).
Pour ma compréhension, avec quelle méthode (et quel paramètre) as tu réussi à installer un driver? Avec le paramètre nomodeset, elles sont quasiment équivalente à ma connaissance.
Pour le prochain PC, pas de mise à jour du bios Ca ne se fait que quand il y a un problème d'instabilité (souvent liée à un bug bios). Là, tu n'en as pas. C'est ta carte graphique qui n'est pas bien supportée. On devrait pouvoir trouver une solution
Dernière modification par NicoApi73 (Le 07/08/2018, à 18:11)
Hors ligne
#54 Le 07/08/2018, à 18:47
- Nuliel
Re : [Résolu] Installation compliquée sur mon nouveau MSI
@NicoApi73 : pour la différence entre nomodeset et modprobe.blacklist=nouveau, modprobe.blacklist=nouveau a pour but d'empêcher le chargement automatique au démarrage du pilote nouveau, ce paramètre est indiqué pour les erreurs CPU stuck (voir la page kernel de la doc pour l'erreur exacte) .nomodeset ça permet de désactiver le KMS (kernel mode setting), Pour une explication j'ai trouvé
nomodeset
The newest kernels have moved the video mode setting into the kernel. So all the programming of the hardware specific clock rates and registers on the video card happen in the kernel rather than in the X driver when the X server starts.. This makes it possible to have high resolution nice looking splash (boot) screens and flicker free transitions from boot splash to login screen. Unfortunately, on some cards this doesnt work properly and you end up with a black screen. Adding the nomodeset parameter instructs the kernel to not load video drivers and use BIOS modes instead until X is loaded.
Je sais pas si nomodeset est vraiment fait à la base pour empêcher l'utilisation d'une carte graphique afin d'installer le pilote propriétaire.
Sinon, pourquoi pas installer aussi le pilote propriétaire du processeur en même temps
Hors ligne
#55 Le 07/08/2018, à 19:35
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
@Naziel : j'ai proposé les 2 car dans un autre fil, j'avais proposé modprobe.blacklist=nouveau, sans succès et c'est nomodeset qui a fonctionné
Hors ligne
#56 Le 07/08/2018, à 23:12
- Regularboi
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Du coup je suis sur la version live actuellement, j'ai utilisé le paramètre nomodeset mes deux choix sont les suivants.
Je vais voir si ça marche sinon j'essaierai de le faire en mode recovery.
Hors ligne
#57 Le 07/08/2018, à 23:18
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Ne boote pas avec la session live, boote avec la session normale.
C'est bien le driver nVidia qu'il faut sélectionner.
Une fois sélectionné, tu fais Apply.
Une fois installé, tu rebootes sans paramètres (sans nomodeset) et tu regardes si ça marche.
Le paramètre est là pour pouvoir démarrer et installer le driver. Le mode recovery, c'est pareil, c'est pour pouvoir booter et installer le driver...
Sinon, pourquoi pas installer aussi le pilote propriétaire du processeur en même temps
Il n'a pas l'air d'être proposé...
Dernière modification par NicoApi73 (Le 07/08/2018, à 23:24)
Hors ligne
#58 Le 07/08/2018, à 23:31
- Regularboi
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Alors du coup j'ai booté en recovery parceque je comprends pas comment mettre le paramétre nomodeset, quand j'appuie sur e pour ouvrir Emacs je situe pas l'endroit ou je dois écrire nomodeset. Donc en mode recovery le bon driver était déja mis du coup j'ai remis l'ancien puis j'ai remis le Nvdia et j'ai redémarré j'ai pu me connecter l'ordinateur n'a pas freeze et je pouvais toujours bouger ma souris sauf que l'écran est resté sur fond violet anormalement longtemps.
Hors ligne
#59 Le 07/08/2018, à 23:37
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Peux tu rebooter de nouveau (en mode normal) et confirmer que c'est lent au boot STP?
Peux tu également faire un boot-info à partir de ta session nouvellement installée STP?
EDIT :
Fais également
dmesg -lerr | head -50
Je viens de parcourir le fil, et on n'a pas regardé les erreurs éventuelles remontées par le noyau
FIN EDIT
Dernière modification par NicoApi73 (Le 07/08/2018, à 23:51)
Hors ligne
#60 Le 07/08/2018, à 23:44
- ??
Re : [Résolu] Installation compliquée sur mon nouveau MSI
sauf que l'écran est resté sur fond violet anormalement longtemps.
Trois secondes ?
Trois Minutes?
Trois heures?
....
Merci de donner le retour de ces commandes
systemd-analyze time
systemd-analyze blame | head -25
systemd-analyze critical-chain
journalctl --no-pager -p err
Dernière modification par ?? (Le 07/08/2018, à 23:48)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#61 Le 08/08/2018, à 12:58
- Regularboi
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Bonjour ce matin en essayant de rallumer Ubuntu mon PC a encore freeze du coup je vais essayer les commandes en mode recovery.
Hors ligne
#62 Le 08/08/2018, à 13:00
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Bonjour,
Peux tu faire
dmesg -lerr | head -50
STP
Hors ligne
#63 Le 08/08/2018, à 13:01
- Nuliel
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Pense à installer le pilote propriétaire du processeur (intel-microcode), s'il n'est pas avec les pilotes nvidia tu peux l'installer avec
sudo apt install intel-microcode
(parce qu'à mon avis ça vient de là)
Dernière modification par Nuliel (Le 08/08/2018, à 13:02)
Hors ligne
#64 Le 08/08/2018, à 13:05
- Regularboi
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Je viens d'essayer ceci
yo_one@yoanMSI:~$ systemd-analyze time
Startup finished in 2.673s (kernel) + 29.483s (userspace) = 32.157s
graphical.target reached after 29.477s in userspace
yo_one@yoanMSI:~$ systemd-analyze blame | head -25
23.280s dev-sda5.device
3.481s NetworkManager-wait-online.service
2.308s friendly-recovery.service
752ms fwupd.service
631ms snapd.service
366ms systemd-rfkill.service
312ms dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\x2da695\x2d0bf2b8491d96.swap
298ms dev-loop7.device
296ms dev-loop0.device
282ms dev-loop5.device
282ms dev-loop2.device
279ms dev-loop1.device
277ms dev-loop4.device
269ms dev-loop3.device
251ms systemd-udev-trigger.service
246ms dev-loop6.device
227ms NetworkManager.service
174ms systemd-fsck@dev-disk-by\x2duuid-db8a05d1\x2d719a\x2d49b0\x2d9888\x2d9a4ff322ecd1.service
173ms upower.service
127ms networkd-dispatcher.service
127ms systemd-timesyncd.service
119ms udisks2.service
118ms systemd-resolved.service
110ms systemd-logind.service
104ms bolt.service
yo_one@yoanMSI:~$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
ESCOC
arted is printed after the "@" character.
nted after the "+" character.
ice @25.986s +3.481s
7s +227ms
+2ms
727s
.service @25.600s +127ms
s-setup.service @25.589s +10ms
et @25.585s
1-gvfs.mount @26.733s
121.mount @26.072s
rget @23.775s
isk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\x2da695\x2d0bf2b8491d96.swap @23.461s +
-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\x2da695\x2d0bf2b8491d96.device @23.45
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOC
arted is printed after the "@" character.
nted after the "+" character.
ice @25.986s +3.481s
7s +227ms
+2ms
727s
.service @25.600s +127ms
s-setup.service @25.589s +10ms
et @25.585s
1-gvfs.mount @26.733s
121.mount @26.072s
rget @23.775s
isk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\x2da695\x2d0bf2b8491d96.swap @23.461s +
-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\x2da695\x2d0bf2b8491d96.device @23.45
~
~
~
~
~
ESCOC
r.
\x2da695\x2d0bf2b8491d96.swap @23.461s +312ms
2a\x2da695\x2d0bf2b8491d96.device @23.459s
~
~
~
~
~
ESCOC
+312ms
59s
~
~
~
~
~
ESCOD
r.
\x2da695\x2d0bf2b8491d96.swap @23.461s +312ms
2a\x2da695\x2d0bf2b8491d96.device @23.459s
~
~
~
~
~
ESCOD
arted is printed after the "@" character.
nted after the "+" character.
ice @25.986s +3.481s
7s +227ms
+2ms
727s
.service @25.600s +127ms
s-setup.service @25.589s +10ms
et @25.585s
1-gvfs.mount @26.733s
121.mount @26.072s
rget @23.775s
isk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\x2da695\x2d0bf2b8491d96.swap @23.461s +
-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\x2da695\x2d0bf2b8491d96.device @23.45
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ESCOD
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @29.477s
└─multi-user.target @29.477s
└─kerneloops.service @29.469s +8ms
└─network-online.target @29.468s
└─NetworkManager-wait-online.service @25.986s +3.481s
└─NetworkManager.service @25.757s +227ms
└─dbus.service @25.748s
└─basic.target @25.734s
└─sockets.target @25.734s
└─snapd.socket @25.731s +2ms
└─sysinit.target @25.727s
└─systemd-timesyncd.service @25.600s +127ms
└─systemd-tmpfiles-setup.service @25.589s +10ms
└─local-fs.target @25.585s
└─run-user-121-gvfs.mount @26.733s
└─run-user-121.mount @26.072s
└─swap.target @23.775s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
~
~
~
~
~
ainsi que ceci
yo_one@yoanMSI:~$ journalctl --no-pager -p err
-- Logs begin at Tue 2018-08-07 04:42:53 CEST, end at Wed 2018-08-08 14:59:41 CEST. --
août 07 17:19:00 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 17:19:00 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 17:19:00 yoanMSI systemd-rfkill[559]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 17:19:00 yoanMSI systemd-rfkill[559]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 17:19:12 yoanMSI wpa_supplicant[1476]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 17:19:12 yoanMSI wpa_supplicant[1476]: dbus: Failed to construct signal
août 07 17:19:12 yoanMSI gnome-session-binary[1575]: Unrecoverable failure in required component org.gnome.Shell.desktop
août 07 17:19:14 yoanMSI spice-vdagent[1828]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 17:19:25 yoanMSI pulseaudio[2161]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
août 07 17:19:26 yoanMSI spice-vdagent[2286]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 17:20:36 yoanMSI sudo[2589]: yo_one : 3 incorrect password attempts ; TTY=pts/0 ; PWD=/home/yo_one ; USER=root ; COMMAND=/usr/bin/apt update
août 07 17:25:20 yoanMSI gdm3[1539]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 07 17:25:20 yoanMSI gdm3[1539]: GLib: g_hash_table_find: assertion 'version == hash_table->version' failed
-- Reboot --
août 07 17:25:43 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 17:25:43 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 17:25:43 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 17:25:43 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 17:25:43 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 17:25:43 yoanMSI systemd-rfkill[382]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 17:25:43 yoanMSI systemd-rfkill[382]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 17:25:44 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 17:25:45 yoanMSI wpa_supplicant[820]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 17:25:45 yoanMSI wpa_supplicant[820]: dbus: Failed to construct signal
août 07 17:25:47 yoanMSI spice-vdagent[1119]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 17:26:24 yoanMSI kernel: watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [thermald:833]
-- Reboot --
août 07 19:08:00 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 19:08:00 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 19:08:00 yoanMSI systemd-rfkill[385]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 19:08:00 yoanMSI systemd-rfkill[385]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 19:08:02 yoanMSI wpa_supplicant[723]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 19:08:02 yoanMSI wpa_supplicant[723]: dbus: Failed to construct signal
août 07 19:08:04 yoanMSI spice-vdagent[1204]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
-- Reboot --
août 07 23:14:24 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:14:24 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:14:24 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 23:14:24 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 23:14:24 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:14:24 yoanMSI systemd-rfkill[370]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 23:14:24 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:14:24 yoanMSI systemd-rfkill[370]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 23:14:26 yoanMSI wpa_supplicant[759]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 23:14:26 yoanMSI wpa_supplicant[759]: dbus: Failed to construct signal
août 07 23:14:28 yoanMSI spice-vdagent[1095]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 23:15:37 yoanMSI kernel: NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
août 07 23:15:37 yoanMSI kernel: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ureadahead:270]
-- Reboot --
août 07 23:16:19 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:19 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:34 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 23:16:34 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 23:16:34 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:34 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:35 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:35 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:35 yoanMSI systemd-rfkill[544]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 23:16:35 yoanMSI systemd-rfkill[544]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 23:16:35 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:35 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:39 yoanMSI wpa_supplicant[1454]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 23:16:39 yoanMSI wpa_supplicant[1454]: dbus: Failed to construct signal
août 07 23:16:39 yoanMSI gnome-session-binary[1579]: Unrecoverable failure in required component org.gnome.Shell.desktop
août 07 23:16:41 yoanMSI spice-vdagent[1827]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 23:16:53 yoanMSI pulseaudio[2146]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
août 07 23:16:54 yoanMSI spice-vdagent[2265]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 23:22:30 yoanMSI gdm3[1539]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 07 23:22:31 yoanMSI gdm3[1539]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 07 23:22:31 yoanMSI gdm3[1539]: GLib: g_hash_table_find: assertion 'version == hash_table->version' failed
-- Reboot --
août 07 23:23:22 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:23:22 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
-- Reboot --
août 08 14:53:20 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:53:20 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
-- Reboot --
août 08 14:58:46 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:58:46 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:59:08 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 08 14:59:08 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 08 14:59:08 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:59:08 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:59:08 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:59:09 yoanMSI systemd-rfkill[532]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 08 14:59:09 yoanMSI systemd-rfkill[532]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 08 14:59:09 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:59:09 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:59:09 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:59:12 yoanMSI wpa_supplicant[1426]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 08 14:59:12 yoanMSI wpa_supplicant[1426]: dbus: Failed to construct signal
août 08 14:59:12 yoanMSI gnome-session-binary[1577]: Unrecoverable failure in required component org.gnome.Shell.desktop
août 08 14:59:13 yoanMSI spice-vdagent[1821]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 08 14:59:23 yoanMSI pulseaudio[2137]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
août 08 14:59:24 yoanMSI spice-vdagent[2256]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
et ceci
yo_one@yoanMSI:~$ dmesg -lerr | head -50
[ 1.426626] PKCS#7 signature not signed with a trusted key
[ 1.508616] PKCS#7 signature not signed with a trusted key
[ 25.119580] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 25.119584] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 25.312230] PKCS#7 signature not signed with a trusted key
[ 25.395238] PKCS#7 signature not signed with a trusted key
[ 25.640630] PKCS#7 signature not signed with a trusted key
[ 25.722891] PKCS#7 signature not signed with a trusted key
[ 25.960743] PKCS#7 signature not signed with a trusted key
[ 26.042300] PKCS#7 signature not signed with a trusted key
Hors ligne
#65 Le 08/08/2018, à 13:23
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Pense à installer le pilote propriétaire du processeur (intel-microcode), s'il n'est pas avec les pilotes nvidia tu peux l'installer avec
sudo apt install intel-microcode
(parce qu'à mon avis ça vient de là)
Dis nous si ça change quelque chose STP
Hors ligne
#66 Le 08/08/2018, à 13:28
- Regularboi
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Toujours pas visiblement
yo_one@yoanMSI:~$ sudo apt install intel-microcode
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
intel-microcode est déjà la version la plus récente (3.20180425.1~ubuntu0.18.04.2).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Hors ligne
#67 Le 08/08/2018, à 13:36
- Nuliel
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Ah, je l'aurais pourtant parié.
PKCS#7 signature not signed with a trusted key
J'imagine que le secure boot est encore un peu présent. Donc il faudrait voir si on pourrait pas le rendre plus permissif
kernel: watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [thermald:833]
C'est l'erreur dont je parlais pour modprobe.blacklist=nouveau
Hors ligne
#68 Le 08/08/2018, à 14:16
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
@Regularboi:
A faire sur la version installée :
sudo cp /etc/default/grub /etc/default/grub.old
sudo nano /etc/default/grub
sur la ligne GRUB_CMDLINE_LINUX_DEFAULT, ajouter modprobe.blacklist=nouveau
Ca doit donner quelque chose comme
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash modprobe.blacklist=nouveau"
sauvegarder (ctrl o)
Entrée
quitter (ctrl x)
sudo update-grub
reboot
Hors ligne
#69 Le 08/08/2018, à 14:32
- Regularboi
Re : [Résolu] Installation compliquée sur mon nouveau MSI
@Regularboi:
A faire sur la version installée :sudo cp /etc/default/grub /etc/default/grub.old sudo nano /etc/default/grub
sur la ligne GRUB_CMDLINE_LINUX_DEFAULT, ajouter modprobe.blacklist=nouveau
Ca doit donner quelque chose commeGRUB_CMDLINE_LINUX_DEFAULT="quiet splash modprobe.blacklist=nouveau"
sauvegarder (ctrl o)
Entrée
quitter (ctrl x)sudo update-grub reboot
J'ai effectué tout ça en mode recovery mais ça freeze toujours après que j'ai entré mon mot de passe.
Hors ligne
#70 Le 08/08/2018, à 14:45
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
En mode recovery, peux tu faire :
dmesg | grep 'ommand line'
cat /etc/default/grub | grep "GRUB_CMDLINE"
et donner de nouveau le retour du post #60 de ??
Hors ligne
#71 Le 08/08/2018, à 15:03
- Nuliel
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Et il faudrait voir pour le secure boot aussi. Je vois que certaines choses sont grisées pour le secure boot, peut être qu'ajouter un mot de passe nul (genre azerty, parce que c'est difficile++++++ de récupérer un mdp bios) au bios permettrait de désactiver vraiment le secure boot (là actuellement tu peux rajouter des clés,c'est tout). Si ce n'est pas le cas, tu peux enlever le mdp bios ajouté précédemment
Hors ligne
#72 Le 08/08/2018, à 15:11
- Regularboi
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Du coup ça donne ça
yo_one@yoanMSI:~$ dmesg | grep 'ommand line'
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=17fbffdc-2aa3-42de-b9cf-8f748c529b62 ro recovery nomodeset
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=17fbffdc-2aa3-42de-b9cf-8f748c529b62 ro recovery nomodeset
yo_one@yoanMSI:~$ dmesg | grep 'command line'
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-30-generic root=UUID=17fbffdc-2aa3-42de-b9cf-8f748c529b62 ro recovery nomodeset
yo_one@yoanMSI:~$ cat /etc/default/grub | grep "GRUB_CMDLINE"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash modprobe.blacklist=nouveau"
GRUB_CMDLINE_LINUX=""
yo_one@yoanMSI:~$ systemd-analyze time
Startup finished in 2.722s (kernel) + 19.838s (userspace) = 22.561s
graphical.target reached after 19.831s in userspace
yo_one@yoanMSI:~$ systemd-analyze blame | head -25
14.187s dev-sda5.device
3.512s NetworkManager-wait-online.service
1.248s friendly-recovery.service
755ms fwupd.service
662ms systemd-fsck@dev-disk-by\x2duuid-db8a05d1\x2d719a\x2d49b0\x2d9888\x2d9a4ff322ecd1.service
617ms snapd.service
396ms systemd-rfkill.service
274ms systemd-udev-trigger.service
235ms dev-loop0.device
208ms NetworkManager.service
205ms dev-loop1.device
200ms dev-loop2.device
192ms dev-loop3.device
188ms dev-loop4.device
175ms upower.service
169ms dev-loop5.device
166ms dev-loop6.device
149ms dev-loop7.device
144ms networkd-dispatcher.service
132ms snap-core-5145.mount
122ms systemd-timesyncd.service
113ms udisks2.service
111ms systemd-resolved.service
105ms snap-gtk\x2dcommon\x2dthemes-319.mount
105ms systemd-logind.service
yo_one@yoanMSI:~$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character
The time the unit takes to start is printed after the "+" character.
graphical.target @19.831s
└─multi-user.target @19.831s
└─kerneloops.service @19.824s +7ms
└─network-online.target @19.823s
└─NetworkManager-wait-online.service @16.310s +3.512s
└─NetworkManager.service @16.095s +208ms
└─dbus.service @16.084s
└─basic.target @16.066s
└─sockets.target @16.066s
└─snapd.socket @16.060s +5ms
└─sysinit.target @16.058s
└─systemd-timesyncd.service @15.935s +122ms
└─systemd-tmpfiles-setup.service @15.924s +9ms
└─local-fs.target @15.921s
└─run-user-121-gvfs.mount @17.066s
└─run-user-121.mount @16.401s
└─swap.target @14.336s
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432a\
└─dev-disk-by\x2duuid-2ed3b269\x2d1f01\x2d432
et ça
yo_one@yoanMSI:~$ journalctl --no-pager -p err
-- Logs begin at Tue 2018-08-07 04:42:53 CEST, end at Wed 2018-08-08 15:08:00 CEST. --
août 07 17:19:00 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 17:19:00 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 17:19:00 yoanMSI systemd-rfkill[559]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 17:19:00 yoanMSI systemd-rfkill[559]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 17:19:12 yoanMSI wpa_supplicant[1476]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 17:19:12 yoanMSI wpa_supplicant[1476]: dbus: Failed to construct signal
août 07 17:19:12 yoanMSI gnome-session-binary[1575]: Unrecoverable failure in required component org.gnome.Shell.desktop
août 07 17:19:14 yoanMSI spice-vdagent[1828]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 17:19:25 yoanMSI pulseaudio[2161]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
août 07 17:19:26 yoanMSI spice-vdagent[2286]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 17:20:36 yoanMSI sudo[2589]: yo_one : 3 incorrect password attempts ; TTY=pts/0 ; PWD=/home/yo_one ; USER=root ; COMMAND=/usr/bin/apt update
août 07 17:25:20 yoanMSI gdm3[1539]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 07 17:25:20 yoanMSI gdm3[1539]: GLib: g_hash_table_find: assertion 'version == hash_table->version' failed
-- Reboot --
août 07 17:25:43 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 17:25:43 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 17:25:43 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 17:25:43 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 17:25:43 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 17:25:43 yoanMSI systemd-rfkill[382]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 17:25:43 yoanMSI systemd-rfkill[382]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 17:25:44 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 17:25:45 yoanMSI wpa_supplicant[820]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 17:25:45 yoanMSI wpa_supplicant[820]: dbus: Failed to construct signal
août 07 17:25:47 yoanMSI spice-vdagent[1119]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 17:26:24 yoanMSI kernel: watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [thermald:833]
-- Reboot --
août 07 19:08:00 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 19:08:00 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 19:08:00 yoanMSI systemd-rfkill[385]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 19:08:00 yoanMSI systemd-rfkill[385]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 19:08:02 yoanMSI wpa_supplicant[723]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 19:08:02 yoanMSI wpa_supplicant[723]: dbus: Failed to construct signal
août 07 19:08:04 yoanMSI spice-vdagent[1204]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
-- Reboot --
août 07 23:14:24 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:14:24 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:14:24 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 23:14:24 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 23:14:24 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:14:24 yoanMSI systemd-rfkill[370]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 23:14:24 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:14:24 yoanMSI systemd-rfkill[370]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 23:14:26 yoanMSI wpa_supplicant[759]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 23:14:26 yoanMSI wpa_supplicant[759]: dbus: Failed to construct signal
août 07 23:14:28 yoanMSI spice-vdagent[1095]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 23:15:37 yoanMSI kernel: NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
août 07 23:15:37 yoanMSI kernel: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ureadahead:270]
-- Reboot --
août 07 23:16:19 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:19 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:34 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 23:16:34 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 07 23:16:34 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:34 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:35 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:35 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:35 yoanMSI systemd-rfkill[544]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 07 23:16:35 yoanMSI systemd-rfkill[544]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 07 23:16:35 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:35 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:16:39 yoanMSI wpa_supplicant[1454]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 07 23:16:39 yoanMSI wpa_supplicant[1454]: dbus: Failed to construct signal
août 07 23:16:39 yoanMSI gnome-session-binary[1579]: Unrecoverable failure in required component org.gnome.Shell.desktop
août 07 23:16:41 yoanMSI spice-vdagent[1827]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 23:16:53 yoanMSI pulseaudio[2146]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
août 07 23:16:54 yoanMSI spice-vdagent[2265]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 07 23:22:30 yoanMSI gdm3[1539]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 07 23:22:31 yoanMSI gdm3[1539]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 07 23:22:31 yoanMSI gdm3[1539]: GLib: g_hash_table_find: assertion 'version == hash_table->version' failed
-- Reboot --
août 07 23:23:22 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 07 23:23:22 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
-- Reboot --
août 08 13:21:34 yoanMSI gdm3[1536]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 08 13:21:34 yoanMSI gdm3[1536]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 08 13:21:34 yoanMSI gdm3[1536]: GLib: g_hash_table_find: assertion 'version == hash_table->version' failed
-- Reboot --
août 08 13:25:44 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 13:25:44 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 13:25:58 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 08 13:25:58 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 08 13:25:58 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 13:25:58 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 13:25:58 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 13:25:58 yoanMSI systemd-rfkill[533]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 08 13:25:58 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 13:25:58 yoanMSI systemd-rfkill[533]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 08 13:25:58 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 13:25:58 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 13:26:03 yoanMSI wpa_supplicant[1430]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 08 13:26:03 yoanMSI wpa_supplicant[1430]: dbus: Failed to construct signal
août 08 13:26:03 yoanMSI gnome-session-binary[1575]: Unrecoverable failure in required component org.gnome.Shell.desktop
août 08 13:26:05 yoanMSI spice-vdagent[1830]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 08 13:26:22 yoanMSI pulseaudio[2204]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
août 08 13:26:23 yoanMSI spice-vdagent[2323]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 08 14:28:54 yoanMSI gnome-session-binary[1728]: CRITICAL: We failed, but the fail whale is dead. Sorry....
août 08 14:28:54 yoanMSI gdm3[1539]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 08 14:28:54 yoanMSI gdm3[1539]: GLib: g_variant_new_string: assertion 'string != NULL' failed
août 08 14:28:54 yoanMSI gdm3[1539]: GLib: g_hash_table_find: assertion 'version == hash_table->version' failed
-- Reboot --
août 08 14:29:14 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:29:14 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
-- Reboot --
août 08 14:53:20 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 14:53:20 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
-- Reboot --
août 08 15:03:03 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 15:03:03 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 15:03:16 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 08 15:03:16 yoanMSI kernel: tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
août 08 15:03:16 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 15:03:16 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 15:03:16 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 15:03:16 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 15:03:16 yoanMSI systemd-rfkill[539]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:00:14.0-usb-0:10:1.0:bluetooth: Invalid argument
août 08 15:03:17 yoanMSI systemd-rfkill[539]: Failed to parse state file /var/lib/systemd/rfkill/pci-0000:02:00.0:wlan: Invalid argument
août 08 15:03:17 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 15:03:17 yoanMSI kernel: PKCS#7 signature not signed with a trusted key
août 08 15:03:19 yoanMSI wpa_supplicant[1453]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
août 08 15:03:19 yoanMSI wpa_supplicant[1453]: dbus: Failed to construct signal
août 08 15:03:19 yoanMSI gnome-session-binary[1580]: Unrecoverable failure in required component org.gnome.Shell.desktop
août 08 15:03:21 yoanMSI spice-vdagent[1831]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 08 15:03:39 yoanMSI pulseaudio[2203]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
août 08 15:03:40 yoanMSI spice-vdagent[2325]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
Et il faudrait voir pour le secure boot aussi. Je vois que certaines choses sont grisées pour le secure boot, peut être qu'ajouter un mot de passe nul (genre azerty, parce que c'est difficile++++++ de récupérer un mdp bios) au bios permettrait de désactiver vraiment le secure boot (là actuellement tu peux rajouter des clés,c'est tout). Si ce n'est pas le cas, tu peux enlever le mdp bios ajouté précédemment
Pour le mot de passe du secureboot en changeant les pilotes il m'a été demandé d'en mettre un mais du coup je suis censé désactive le secureboot maintenant si j'ai bien compris ?
Hors ligne
#73 Le 08/08/2018, à 15:20
- Nuliel
Re : [Résolu] Installation compliquée sur mon nouveau MSI
A ton post 25 tu as posté https://ibb.co/k6b2gK et tu as dit que tu as le choix entre Custom et Default pour le secure boot. Je crois que le secure boot est toujours activé, custom permet juste d'ajouter des clés. Je crois pas que les pilotes nvidia soient signés, du coup ça freeze.
C'est pas les mêmes mots de passe. Actuellement, tu as un mot de passe sur ubuntu, mais pas sur le bios.
Peux tu aller dans le bios, il devrait y avoir set administrator password ou quelque chose du genre, mettre le mot de passe azerty (l'idée étant qu'on puisse pas l'oublier), et voir si sur https://ibb.co/k6b2gK la partie secure boot est encore grisée, et si on peut désactiver vraiment le secure boot. S'il n'est toujours pas possible d'enlever le secure boot, alors tu peux enlever le mot de passe bios
Hors ligne
#74 Le 08/08/2018, à 15:23
- NicoApi73
Re : [Résolu] Installation compliquée sur mon nouveau MSI
@Naziel :
août 08 15:03:19 yoanMSI gnome-session-binary[1580]: Unrecoverable failure in required component org.gnome.Shell.desktop
août 08 15:03:21 yoanMSI spice-vdagent[1831]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
août 08 15:03:39 yoanMSI pulseaudio[2203]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
août 08 15:03:40 yoanMSI spice-vdagent[2325]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
Ca ressemble plus à gnome qui n'arrive pas à démarrer...
ok, vu :
Je crois pas que les pilotes nvidia soient signés, du coup ça freeze.
Je comprends
Dernière modification par NicoApi73 (Le 08/08/2018, à 15:26)
Hors ligne
#75 Le 08/08/2018, à 15:33
- Nuliel
Re : [Résolu] Installation compliquée sur mon nouveau MSI
Je crois que tu as raison (les logs ont quelques messages en pluspar contre)
Dernière modification par Nuliel (Le 08/08/2018, à 15:34)
Hors ligne