#76 Le 03/10/2018, à 18:43
- Mornagest
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Tu as essayé sudo ifconfig wlan0 up ?
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#77 Le 03/10/2018, à 19:21
- joshw
Re : [RESOLU] Installation d'un driver wifi / Installation locale
oui j'ai suivi ce qui est écrit dans le lien que j'ai partagé sur "rkill", du coup j'ai eu un retour du type "processus arrêté", plantage, redémarrage, plantage, redémarrage ....
baghou@baghou-All-Series:~$ iwconfig
ra0 Ralink STA
lo no wireless extensions.
enp0s20u1 no wireless extensions.
enp3s0 no wireless extensions.
baghou@baghou-All-Series:~$ rfkill list
baghou@baghou-All-Series:~$ sudo insmod mt7610u.ko
[sudo] Mot de passe de baghou :
insmod: ERROR: could not load module mt7610u.ko: No such file or directory
baghou@baghou-All-Series:~$ cd Documents/test3
baghou@baghou-All-Series:~/Documents/test3$ sudo insmod mt7610u.ko
insmod: ERROR: could not load module mt7610u.ko: No such file or directory
baghou@baghou-All-Series:~/Documents/test3$ cd mt7610u-master/
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo insmod mt7610u.ko
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ iwconfig
ra0 Ralink STA
lo no wireless extensions.
enp0s20u1 no wireless extensions.
enp3s0 no wireless extensions.
bizare une fois le wirelesse est nomé ra0 une fois wlan0 puis de nouveau ra0 alors que j'ai chargé le driver avec :
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo insmod mt7610u.ko
puis :
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ rfkill list
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo ifconfig ra0 up
SIOCSIFFLAGS: Opération non permise
quelque chose m'échappe ...
Dernière modification par joshw (Le 03/10/2018, à 19:23)
Hors ligne
#78 Le 03/10/2018, à 20:05
- joshw
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Bonsoir,
Pour info, je continuerai mes recherches demain.
Bonne soirée !
Hors ligne
#79 Le 04/10/2018, à 10:00
- Mornagest
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Que donne lsmod ? Il y a peut-être un conflit entre deux pilotes.
Sinon, comme je disais plus tôt dans la discussion, on peut aussi tenter d'émuler le pilote utilisé par Windows pour le faire tourner sur Ubuntu, avec l'utilitaire NDISwrapper (cfr ma signature).
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#80 Le 04/10/2018, à 15:35
- joshw
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Bonjour,
Pour info :
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ make
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.15.0-36-generic/build M=/home/baghou/Documents/test3/mt7610u-master modules
make[1] : on entre dans le répertoire « /usr/src/linux-headers-4.15.0-36-generic »
Building modules, stage 2.
MODPOST 1 modules
make[1] : on quitte le répertoire « /usr/src/linux-headers-4.15.0-36-generic »
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo make installfw
[sudo] Mot de passe de baghou :
cp -n firmware/* /lib/firmware
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo insmod mt7610u.ko
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ iwconfig
lo no wireless extensions.
ra0 Ralink STA
enp0s20u1 no wireless extensions.
enp3s0 no wireless extensions.
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ modinfo mt7610u.ko
filename: /home/baghou/Documents/test3/mt7610u-master/mt7610u.ko
firmware: mt7650u.bin
firmware: mt7610u.bin
description: MT7610U 80211.ac usb driver
author: Hans Ulli Kroll <ulli.kroll@googlemail.com>
license: GPL
srcversion: 47914B4B1C10007E257B19D
alias: usb:v0E8Dp7650d*dc*dsc*dp*icFFisc02ipFFin*
alias: usb:v0E8Dp7630d*dc*dsc*dp*icFFisc02ipFFin*
alias: usb:v2357p0105d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0079d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392pC711d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v20F4p806Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v293Cp5702d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v057Cp8502d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04BBp0951d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07B8p7610d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0586p3425d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3D02d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB31d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0075d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B05p17DBd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B05p17D1d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v148Fp760Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v148Fp761Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392pB711d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392pA711d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0E8Dp7610d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13B1p003Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v148Fp7610d*dc*dsc*dp*ic*isc*ip*in*
depends: cfg80211
retpoline: Y
name: mt7610u
vermagic: 4.15.0-36-generic SMP mod_unload
et
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ lsmod
Module Size Used by
mt7610u 630784 0
rndis_host 16384 0
cdc_ether 16384 1 rndis_host
usbnet 45056 2 rndis_host,cdc_ether
cfg80211 622592 1 mt7610u
intel_rapl 20480 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
kvm_intel 212992 0
snd_hda_codec_realtek 106496 1
mt7650u_sta 917504 0
kvm 598016 1 kvm_intel
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
irqbypass 16384 1 kvm
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
snd_hda_codec_hdmi 49152 1
snd_hda_intel 40960 8
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
ghash_clmulni_intel 16384 0
pcbc 16384 0
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 20480 1 snd_hda_codec
aesni_intel 188416 0
aes_x86_64 20480 1 aesni_intel
snd_pcm 98304 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
joydev 24576 0
input_leds 16384 0
crypto_simd 16384 1 aesni_intel
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
eeepc_wmi 16384 0
snd_rawmidi 32768 1 snd_seq_midi
glue_helper 16384 1 aesni_intel
asus_wmi 28672 1 eeepc_wmi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
sparse_keymap 16384 1 asus_wmi
wmi_bmof 16384 0
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
intel_cstate 20480 0
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
intel_rapl_perf 16384 0
lpc_ich 24576 0
snd 81920 27 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
mei_me 40960 0
mei 90112 1 mei_me
soundcore 16384 1 snd
shpchp 36864 0
mac_hid 16384 0
sch_fq_codel 20480 3
parport_pc 36864 0
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
ip_tables 28672 0
x_tables 40960 1 ip_tables
autofs4 40960 2
amdgpu 2703360 0
chash 16384 1 amdgpu
hid_microsoft 16384 0
hid_generic 16384 0
uas 24576 0
usbhid 49152 0
usb_storage 69632 1 uas
hid 118784 3 hid_generic,usbhid,hid_microsoft
radeon 1470464 20
i2c_algo_bit 16384 2 amdgpu,radeon
ttm 106496 2 amdgpu,radeon
drm_kms_helper 172032 2 amdgpu,radeon
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 401408 17 amdgpu,radeon,ttm,drm_kms_helper
ahci 36864 1
r8169 86016 0
libahci 32768 1 ahci
mii 16384 2 r8169,usbnet
wmi 24576 2 asus_wmi,wmi_bmof
video 45056 1 asus_wmi
et
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo ifconfig ra0 up
SIOCSIFFLAGS: Opération non permise
et
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 048d:1336 Integrated Technology Express, Inc. SD/MMC Cardreader
Bus 003 Device 003: ID 148f:761a Ralink Technology, Corp.
Bus 003 Device 002: ID 045e:076c Microsoft Corp. Comfort Mouse 4500
Bus 003 Device 005: ID 045e:07f8 Microsoft Corp. Wired Keyboard 600 (model 1576)
Bus 003 Device 009: ID 1782:5d20 Spreadtrum Communications Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
et
https://superuser.com/questions/1202077 … -permitted
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo airmon-ng
PHY Interface Driver Chipset
Warn ON: USB
null ra0 ?????? Ralink Technology, Corp.
Dernière modification par joshw (Le 04/10/2018, à 15:45)
Hors ligne
#81 Le 04/10/2018, à 15:53
- joshw
Re : [RESOLU] Installation d'un driver wifi / Installation locale
il y a aussi ceci :
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ dmesg --follow
[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02
[ 0.000000] Linux version 4.15.0-36-generic (buildd@lgw01-amd64-031) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 (Ubuntu 4.15.0-36.39-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-36-generic root=UUID=0c4ee5a3-3cc5-4304-8e87-6e7a9b8585e1 ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c99c9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c99ca000-0x00000000c99d0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c99d1000-0x00000000c9e1bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e1c000-0x00000000ca233fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca234000-0x00000000dd73afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd73b000-0x00000000dd942fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd943000-0x00000000dd957fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd958000-0x00000000dde93fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dde94000-0x00000000deffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/H87M-E, BIOS 0801 12/02/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 021E000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 8176M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x42b3f000, 0x42b3ffff] PGTABLE
[ 0.000000] BRK [0x42b40000, 0x42b40fff] PGTABLE
[ 0.000000] BRK [0x42b41000, 0x42b41fff] PGTABLE
[ 0.000000] BRK [0x42b42000, 0x42b42fff] PGTABLE
[ 0.000000] BRK [0x42b43000, 0x42b43fff] PGTABLE
[ 0.000000] BRK [0x42b44000, 0x42b44fff] PGTABLE
[ 0.000000] BRK [0x42b45000, 0x42b45fff] PGTABLE
[ 0.000000] BRK [0x42b46000, 0x42b46fff] PGTABLE
[ 0.000000] BRK [0x42b47000, 0x42b47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3160d000-0x34afdfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD947080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD9531F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DD947188 00C06C (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DDE92080 000040
[ 0.000000] ACPI: APIC 0x00000000DD953308 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD953380 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DD9533C8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DD953908 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000DD9543E0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DD954420 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD954458 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD9547C8 003482 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DD957CA8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21efd3000-0x21effdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c99c9fff]
[ 0.000000] node 0: [mem 0x00000000c99d1000-0x00000000c9e1bfff]
[ 0.000000] node 0: [mem 0x00000000ca234000-0x00000000dd73afff]
[ 0.000000] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 2081465
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14093 pages used for memmap
[ 0.000000] DMA32 zone: 901917 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc99ca000-0xc99d0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e1c000-0xca233fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd73b000-0xdd942fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd943000-0xdd957fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd958000-0xdde93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdde94000-0xdeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2048919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-36-generic root=UUID=0c4ee5a3-3cc5-4304-8e87-6e7a9b8585e1 ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8045616K/8325860K available (12300K kernel code, 2472K rwdata, 4248K rodata, 2408K init, 2416K bss, 280244K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39168 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 3192.678 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.35 BogoMIPS (lpj=12770712)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024000] mce: CPU supports 9 MCE banks
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.032205] Freeing SMP alternatives memory: 36K
[ 0.035410] TSC deadline timer enabled
[ 0.035411] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.035460] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.035491] ... version: 3
[ 0.035491] ... bit width: 48
[ 0.035492] ... generic registers: 8
[ 0.035492] ... value mask: 0000ffffffffffff
[ 0.035493] ... max period: 00007fffffffffff
[ 0.035493] ... fixed-purpose events: 3
[ 0.035494] ... event mask: 00000007000000ff
[ 0.035521] Hierarchical SRCU implementation.
[ 0.036000] smp: Bringing up secondary CPUs ...
[ 0.036000] x86: Booting SMP configuration:
[ 0.036000] .... node #0, CPUs: #1
[ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.036000] #2 #3
[ 0.037508] smp: Brought up 1 node, 4 CPUs
[ 0.037508] smpboot: Max logical packages: 1
[ 0.037508] smpboot: Total of 4 processors activated (25541.42 BogoMIPS)
[ 0.040207] devtmpfs: initialized
[ 0.040207] x86/mm: Memory block size: 128MB
[ 0.040490] evm: security.selinux
[ 0.040490] evm: security.SMACK64
[ 0.040491] evm: security.SMACK64EXEC
[ 0.040491] evm: security.SMACK64TRANSMUTE
[ 0.040492] evm: security.SMACK64MMAP
[ 0.040492] evm: security.apparmor
[ 0.040492] evm: security.ima
[ 0.040493] evm: security.capability
[ 0.040503] PM: Registering ACPI NVS region [mem 0xc99ca000-0xc99d0fff] (28672 bytes)
[ 0.040503] PM: Registering ACPI NVS region [mem 0xdd958000-0xdde93fff] (5488640 bytes)
[ 0.040503] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040503] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.040503] pinctrl core: initialized pinctrl subsystem
[ 0.040503] RTC time: 13:01:54, date: 10/04/18
[ 0.040503] NET: Registered protocol family 16
[ 0.040503] audit: initializing netlink subsys (disabled)
[ 0.040503] audit: type=2000 audit(1538658114.040:1): state=initialized audit_enabled=0 res=1
[ 0.040503] cpuidle: using governor ladder
[ 0.040503] cpuidle: using governor menu
[ 0.040503] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.040503] ACPI: bus type PCI registered
[ 0.040503] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.040503] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.040503] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.040503] PCI: Using configuration type 1 for base access
[ 0.040503] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.040882] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.040882] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.040882] ACPI: Added _OSI(Module Device)
[ 0.040882] ACPI: Added _OSI(Processor Device)
[ 0.040882] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.040882] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.040882] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.040882] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.040882] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.045744] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.046168] ACPI: Dynamic OEM Table Load:
[ 0.046168] ACPI: SSDT 0xFFFF9C8C54CF4800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.046168] ACPI: Dynamic OEM Table Load:
[ 0.046168] ACPI: SSDT 0xFFFF9C8C552D0800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.048108] ACPI: Dynamic OEM Table Load:
[ 0.048112] ACPI: SSDT 0xFFFF9C8C54D1A000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.048419] ACPI: Interpreter enabled
[ 0.048441] ACPI: (supports S0 S3 S4 S5)
[ 0.048442] ACPI: Using IOAPIC for interrupt routing
[ 0.048465] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.048766] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.057698] ACPI: Power Resource [FN00] (off)
[ 0.057769] ACPI: Power Resource [FN01] (off)
[ 0.057839] ACPI: Power Resource [FN02] (off)
[ 0.057905] ACPI: Power Resource [FN03] (off)
[ 0.057972] ACPI: Power Resource [FN04] (off)
[ 0.058798] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.058803] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.059059] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.059214] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.059215] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.059633] PCI host bridge to bus 0000:00
[ 0.059635] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.059636] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.059637] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.059638] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.059639] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.059640] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.059641] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.059642] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.059643] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.059644] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.059645] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.059651] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.059725] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.059755] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.059884] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.059902] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.059953] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.060014] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.060032] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
[ 0.060086] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.060149] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.060167] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
[ 0.060238] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.060300] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.060316] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.060374] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.060436] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.060496] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.060602] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.060662] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.060770] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.060789] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[ 0.060861] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.060923] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
[ 0.061070] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.061083] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.061089] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.061095] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.061100] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.061106] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.061112] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
[ 0.061140] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.061195] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.061210] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
[ 0.061226] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.061322] pci 0000:01:00.0: [1002:683f] type 00 class 0x030000
[ 0.061334] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.061340] pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit]
[ 0.061344] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.061352] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
[ 0.061378] pci 0000:01:00.0: supports D1 D2
[ 0.061379] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.061415] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.061426] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
[ 0.061467] pci 0000:01:00.1: supports D1 D2
[ 0.072022] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.072024] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.072025] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.072028] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.072081] acpiphp: Slot [1] registered
[ 0.072084] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.072147] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.072174] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.072200] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.072216] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.072308] pci 0000:03:00.0: supports D1 D2
[ 0.072309] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.084030] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.084033] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.084035] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.084039] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.084724] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.084777] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.084829] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.084880] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.084930] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.084980] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.085031] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.085081] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.085578] SCSI subsystem initialized
[ 0.085586] libata version 3.00 loaded.
[ 0.085586] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.085586] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.085586] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.085586] vgaarb: loaded
[ 0.085586] ACPI: bus type USB registered
[ 0.085586] usbcore: registered new interface driver usbfs
[ 0.085586] usbcore: registered new interface driver hub
[ 0.085586] usbcore: registered new device driver usb
[ 0.085586] EDAC MC: Ver: 3.0.0
[ 0.085586] PCI: Using ACPI for IRQ routing
[ 0.088306] PCI: pci_cache_line_size set to 64 bytes
[ 0.088340] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.088341] e820: reserve RAM buffer [mem 0xc99ca000-0xcbffffff]
[ 0.088342] e820: reserve RAM buffer [mem 0xc9e1c000-0xcbffffff]
[ 0.088343] e820: reserve RAM buffer [mem 0xdd73b000-0xdfffffff]
[ 0.088344] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.088344] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.088403] NetLabel: Initializing
[ 0.088403] NetLabel: domain hash size = 128
[ 0.088404] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.088414] NetLabel: unlabeled traffic allowed by default
[ 0.088423] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.088423] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.090276] clocksource: Switched to clocksource hpet
[ 0.095931] VFS: Disk quotas dquot_6.6.0
[ 0.095943] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.096034] AppArmor: AppArmor Filesystem Enabled
[ 0.096055] pnp: PnP ACPI init
[ 0.096171] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.096175] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.096351] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.096353] system 00:01: [io 0xffff] has been reserved
[ 0.096354] system 00:01: [io 0xffff] has been reserved
[ 0.096355] system 00:01: [io 0xffff] has been reserved
[ 0.096356] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.096357] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.096358] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.096359] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.096360] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.096362] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.096364] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096383] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.096424] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.096427] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.096506] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.096508] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096551] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.096554] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.096759] pnp 00:06: [dma 0 disabled]
[ 0.096796] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.097205] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.097206] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.097207] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.097208] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.097209] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.097211] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.097212] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.097213] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.097214] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.097216] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.097217] system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.097218] system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.097221] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.097495] pnp: PnP ACPI: found 8 devices
[ 0.103125] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.103144] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.103145] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.103148] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.103150] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.103152] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.103160] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.103162] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.103165] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.103168] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.103172] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.103174] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.103175] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.103176] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.103177] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.103178] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.103179] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.103180] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.103181] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.103182] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.103183] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.103184] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.103185] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.103186] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.103187] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.103188] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.103277] NET: Registered protocol family 2
[ 0.103447] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.103569] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.103768] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.103793] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.103822] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.103871] NET: Registered protocol family 1
[ 0.152089] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.152094] PCI: CLS 64 bytes, default 64
[ 0.152121] Unpacking initramfs...
[ 0.723167] Freeing initrd memory: 54212K
[ 0.723181] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.723183] software IO TLB [mem 0xd973b000-0xdd73b000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.723385] Scanning for low memory corruption every 60 seconds
[ 0.723841] Initialise system trusted keyrings
[ 0.723847] Key type blacklist registered
[ 0.723874] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.724652] zbud: loaded
[ 0.724984] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.725074] fuse init (API version 7.26)
[ 0.725923] Key type asymmetric registered
[ 0.725924] Asymmetric key parser 'x509' registered
[ 0.725940] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.725961] io scheduler noop registered
[ 0.725962] io scheduler deadline registered
[ 0.725987] io scheduler cfq registered (default)
[ 0.726409] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.726409] vesafb: scrolling: redraw
[ 0.726411] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.726417] vesafb: framebuffer at 0xe0000000, mapped to 0x (ptrval), using 5120k, total 5120k
[ 0.726478] Console: switching to colour frame buffer device 160x64
[ 0.726492] fb0: VESA VGA frame buffer device
[ 0.726501] intel_idle: MWAIT substates: 0x42120
[ 0.726501] intel_idle: v0.4.1 model 0x3C
[ 0.726602] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.726673] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.726681] ACPI: Power Button [PWRB]
[ 0.726704] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.726719] ACPI: Power Button [PWRF]
[ 0.727285] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.727406] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.727407] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.727625] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.727626] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.727719] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.748165] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.749464] Linux agpgart interface v0.103
[ 0.750479] loop: module loaded
[ 0.750580] libphy: Fixed MDIO Bus: probed
[ 0.750580] tun: Universal TUN/TAP device driver, 1.6
[ 0.750599] PPP generic driver version 2.4.2
[ 0.750623] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.750625] ehci-pci: EHCI PCI platform driver
[ 0.750707] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.750715] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.750723] ehci-pci 0000:00:1a.0: debug port 2
[ 0.754631] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.754641] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7f18000
[ 0.768042] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.768069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.768070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.768071] usb usb1: Product: EHCI Host Controller
[ 0.768072] usb usb1: Manufacturer: Linux 4.15.0-36-generic ehci_hcd
[ 0.768073] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.768229] hub 1-0:1.0: USB hub found
[ 0.768233] hub 1-0:1.0: 2 ports detected
[ 0.768403] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.768405] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.768414] ehci-pci 0000:00:1d.0: debug port 2
[ 0.772301] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.772309] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
[ 0.788044] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.788071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.788072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.788073] usb usb2: Product: EHCI Host Controller
[ 0.788074] usb usb2: Manufacturer: Linux 4.15.0-36-generic ehci_hcd
[ 0.788075] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.788222] hub 2-0:1.0: USB hub found
[ 0.788226] hub 2-0:1.0: 2 ports detected
[ 0.788322] ehci-platform: EHCI generic platform driver
[ 0.788328] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.788330] ohci-pci: OHCI PCI platform driver
[ 0.788336] ohci-platform: OHCI generic platform driver
[ 0.788340] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.788431] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.788434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.789499] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.789502] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.789584] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.789585] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.789586] usb usb3: Product: xHCI Host Controller
[ 0.789587] usb usb3: Manufacturer: Linux 4.15.0-36-generic xhci-hcd
[ 0.789588] usb usb3: SerialNumber: 0000:00:14.0
[ 0.789732] hub 3-0:1.0: USB hub found
[ 0.789747] hub 3-0:1.0: 14 ports detected
[ 0.792127] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.792131] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.792133] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.792160] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.792161] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.792162] usb usb4: Product: xHCI Host Controller
[ 0.792163] usb usb4: Manufacturer: Linux 4.15.0-36-generic xhci-hcd
[ 0.792163] usb usb4: SerialNumber: 0000:00:14.0
[ 0.792309] hub 4-0:1.0: USB hub found
[ 0.792319] hub 4-0:1.0: 6 ports detected
[ 0.792814] i8042: PNP: No PS/2 controller found.
[ 0.792999] mousedev: PS/2 mouse device common for all mice
[ 0.793146] rtc_cmos 00:02: RTC can wake from S4
[ 0.793261] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.793282] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.793286] i2c /dev entries driver
[ 0.793289] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[ 0.793326] device-mapper: uevent: version 1.0.3
[ 0.793382] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.793386] intel_pstate: Intel P-state driver initializing
[ 0.793584] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.793901] NET: Registered protocol family 10
[ 0.796680] Segment Routing with IPv6
[ 0.796693] NET: Registered protocol family 17
[ 0.796730] Key type dns_resolver registered
[ 0.796963] RAS: Correctable Errors collector initialized.
[ 0.796982] microcode: sig=0x306c3, pf=0x2, revision=0x25
[ 0.797077] microcode: Microcode Update Driver: v2.2.
[ 0.797083] sched_clock: Marking stable (797074526, 0)->(778836160, 18238366)
[ 0.797226] registered taskstats version 1
[ 0.797236] Loading compiled-in X.509 certificates
[ 0.798948] Loaded X.509 cert 'Build time autogenerated kernel key: fcd93cd0852f7ae1da10896371e06e3c19479c00'
[ 0.798961] zswap: loaded using pool lzo/zbud
[ 0.801257] Key type big_key registered
[ 0.801260] Key type trusted registered
[ 0.802392] Key type encrypted registered
[ 0.802393] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.802395] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.802398] ima: Allocated hash algorithm: sha1
[ 0.802412] evm: HMAC attrs: 0x1
[ 0.802699] Magic number: 6:663:27
[ 0.802747] memory memory67: hash matches
[ 0.802795] rtc_cmos 00:02: setting system clock to 2018-10-04 13:01:54 UTC (1538658114)
[ 0.802823] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.802823] EDD information not available.
[ 1.070281] Freeing unused kernel memory: 2408K
[ 1.084046] Write protecting the kernel read-only data: 20480k
[ 1.084973] Freeing unused kernel memory: 2008K
[ 1.087807] Freeing unused kernel memory: 1896K
[ 1.091906] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.091907] x86/mm: Checking user space page tables
[ 1.095918] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.104023] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.128014] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.132016] usb 3-5: new low-speed USB device number 2 using xhci_hcd
[ 1.152767] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.152778] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.153012] ahci 0000:00:1f.2: version 3.0
[ 1.153164] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
[ 1.153166] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.165105] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0x (ptrval), e0:3f:49:45:f6:4a, XID 0c000800 IRQ 26
[ 1.165106] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.172807] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.188665] scsi host0: ahci
[ 1.188741] scsi host1: ahci
[ 1.188787] scsi host2: ahci
[ 1.188832] scsi host3: ahci
[ 1.188877] scsi host4: ahci
[ 1.188928] scsi host5: ahci
[ 1.188956] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 25
[ 1.188957] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 25
[ 1.188959] ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 25
[ 1.188960] ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 25
[ 1.188960] ata5: DUMMY
[ 1.188961] ata6: DUMMY
[ 1.191161] [drm] radeon kernel modesetting enabled.
[ 1.191189] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[ 1.191189] fb: switching to radeondrmfb from VESA VGA
[ 1.191203] Console: switching to colour dummy device 80x25
[ 1.191407] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x1787:0x2318 0x00).
[ 1.191433] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 1.191436] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs
[ 1.191438] radeon 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[ 1.191470] ATOM BIOS: VERDE
[ 1.191589] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 1.191590] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[ 1.191593] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 1.191594] [drm] RAM width 128bits DDR
[ 1.191623] [TTM] Zone kernel: Available graphics memory: 4053088 kiB
[ 1.191623] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.191624] [TTM] Initializing pool allocator
[ 1.191626] [TTM] Initializing DMA pool allocator
[ 1.191639] [drm] radeon: 2048M of VRAM memory ready
[ 1.191640] [drm] radeon: 2048M of GTT memory ready.
[ 1.191646] [drm] Loading verde Microcode
[ 1.191720] [drm] Internal thermal controller with fan control
[ 1.191761] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[ 1.197543] [drm] radeon: dpm initialized
[ 1.199019] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 1.199023] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 1.200238] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[ 1.200240] [drm] PCIE gen 3 link speeds already enabled
[ 1.214533] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 1.214625] radeon 0000:01:00.0: WB enabled
[ 1.214627] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x (ptrval)
[ 1.214628] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x (ptrval)
[ 1.214629] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x (ptrval)
[ 1.214630] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x (ptrval)
[ 1.214631] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x (ptrval)
[ 1.214900] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x (ptrval)
[ 1.234871] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0x (ptrval)
[ 1.234872] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0x (ptrval)
[ 1.234873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.234874] [drm] Driver supports precise vblank timestamp query.
[ 1.234874] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.234899] radeon 0000:01:00.0: radeon: using MSI.
[ 1.234918] [drm] radeon: irq initialized.
[ 1.268305] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.268306] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.268569] hub 1-1:1.0: USB hub found
[ 1.268677] hub 1-1:1.0: 6 ports detected
[ 1.289338] usb 3-5: New USB device found, idVendor=045e, idProduct=076c
[ 1.289339] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.289340] usb 3-5: Product: Microsoft® Comfort Mouse 4500
[ 1.289341] usb 3-5: Manufacturer: Microsoft
[ 1.292327] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.292338] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.292581] hub 2-1:1.0: USB hub found
[ 1.292666] hub 2-1:1.0: 8 ports detected
[ 1.420015] usb 3-7: new high-speed USB device number 3 using xhci_hcd
[ 1.501362] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.502009] ata4.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100
[ 1.502010] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.502431] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.502562] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.502585] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.502707] ata4.00: configured for UDMA/100
[ 1.503239] ata1.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133
[ 1.503240] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.503894] ata2.00: ATA-8: HUA723020ALA640, MK7OA870, max UDMA/133
[ 1.503895] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.503911] ata1.00: configured for UDMA/133
[ 1.504079] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[ 1.504260] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.504261] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.504266] sd 0:0:0:0: [sda] Write Protect is off
[ 1.504267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.504273] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.504276] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.504837] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.504844] No Local Variables are initialized for Method [_GTF]
[ 1.504845] No Arguments are initialized for method [_GTF]
[ 1.504846] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 1.504852] ata3.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 1.505413] ata2.00: configured for UDMA/133
[ 1.505585] scsi 1:0:0:0: Direct-Access ATA HUA723020ALA640 A870 PQ: 0 ANSI: 5
[ 1.505710] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.505716] No Local Variables are initialized for Method [_GTF]
[ 1.505717] No Arguments are initialized for method [_GTF]
[ 1.505718] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 1.505735] ata3.00: configured for UDMA/100
[ 1.505798] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.505799] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.505805] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.505806] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.505816] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.507046] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 1.525689] sda: sda1 < sda5 >
[ 1.525988] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.527738] sdb: sdb1 sdb2 sdb3 < sdb5 > sdb4
[ 1.528031] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.595021] usb 3-7: New USB device found, idVendor=148f, idProduct=761a
[ 1.595023] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.595023] usb 3-7: Product: WiFi
[ 1.595024] usb 3-7: Manufacturer: MediaTek
[ 1.595025] usb 3-7: SerialNumber: 1.0
[ 1.672878] [drm] ring test on 0 succeeded in 2 usecs
[ 1.672882] [drm] ring test on 1 succeeded in 1 usecs
[ 1.672885] [drm] ring test on 2 succeeded in 1 usecs
[ 1.672896] [drm] ring test on 3 succeeded in 9 usecs
[ 1.672901] [drm] ring test on 4 succeeded in 3 usecs
[ 1.728011] usb 3-8: new high-speed USB device number 4 using xhci_hcd
[ 1.728018] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 1.728040] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[ 1.848591] [drm] ring test on 5 succeeded in 2 usecs
[ 1.848595] [drm] UVD initialized successfully.
[ 1.957812] [drm] ring test on 6 succeeded in 15 usecs
[ 1.957827] [drm] ring test on 7 succeeded in 1 usecs
[ 1.957827] [drm] VCE initialized successfully.
[ 1.957981] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.958025] [drm] ib test on ring 1 succeeded in 0 usecs
[ 1.958051] [drm] ib test on ring 2 succeeded in 0 usecs
[ 1.958092] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.958127] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.008838] usb 3-8: New USB device found, idVendor=048d, idProduct=1336
[ 2.008839] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.008840] usb 3-8: Product: Mass Storage Device
[ 2.008841] usb 3-8: Manufacturer: Generic
[ 2.008842] usb 3-8: SerialNumber: 00000000000006
[ 2.119515] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.119516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.119621] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.119675] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 2.119866] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5
[ 2.120013] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.120095] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.120096] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 2.120106] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.120108] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.120151] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.132774] sdc: sdc1
[ 2.133076] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.135990] usb 3-14: new low-speed USB device number 5 using xhci_hcd
[ 2.282623] random: fast init done
[ 2.293921] usb 3-14: New USB device found, idVendor=045e, idProduct=07f8
[ 2.293923] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.293924] usb 3-14: Product: Wired Keyboard 600
[ 2.293925] usb 3-14: Manufacturer: Microsoft
[ 2.294040] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.294047] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.294059] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.297486] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.297897] usb-storage 3-8:1.0: USB Mass Storage device detected
[ 2.298656] scsi host6: usb-storage 3-8:1.0
[ 2.298729] usbcore: registered new interface driver usb-storage
[ 2.299519] usbcore: registered new interface driver uas
[ 2.311725] usbcore: registered new interface driver usbhid
[ 2.311726] usbhid: USB HID core driver
[ 2.313415] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:045E:076C.0001/input/input3
[ 2.313587] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:045E:07F8.0002/input/input2
[ 2.372206] microsoft 0003:045E:076C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:14.0-5/input0
[ 2.432185] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-14/input0
[ 2.432305] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:045E:07F8.0003/input/input4
[ 2.492126] hid-generic 0003:045E:07F8.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-14/input1
[ 2.620073] [drm] ib test on ring 5 succeeded
[ 2.748187] clocksource: Switched to clocksource tsc
[ 3.132102] [drm] ib test on ring 6 succeeded
[ 3.324545] scsi 6:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
[ 3.324791] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.325587] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 3.644065] [drm] ib test on ring 7 succeeded
[ 3.644824] [drm] Radeon Display Connectors
[ 3.644824] [drm] Connector 0:
[ 3.644825] [drm] HDMI-A-1
[ 3.644825] [drm] HPD1
[ 3.644826] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 3.644827] [drm] Encoders:
[ 3.644827] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.644828] [drm] Connector 1:
[ 3.644828] [drm] DVI-D-1
[ 3.644828] [drm] HPD2
[ 3.644829] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 3.644829] [drm] Encoders:
[ 3.644830] [drm] DFP2: INTERNAL_UNIPHY
[ 3.644830] [drm] Connector 2:
[ 3.644831] [drm] VGA-1
[ 3.644832] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 3.644832] [drm] Encoders:
[ 3.644832] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.679716] [drm] fb mappable at 0xE05D9000
[ 3.679716] [drm] vram apper at 0xE0000000
[ 3.679717] [drm] size 5242880
[ 3.679717] [drm] fb depth is 24
[ 3.679717] [drm] pitch is 5120
[ 3.679744] fbcon: radeondrmfb (fb0) is primary device
[ 3.679776] Console: switching to colour frame buffer device 160x64
[ 3.679791] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.692037] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 3.714505] [drm] amdgpu kernel modesetting enabled.
[ 3.912959] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.603435] random: crng init done
[ 4.603436] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.770969] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.826064] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.844093] systemd[1]: Detected architecture x86-64.
[ 4.851768] systemd[1]: Set hostname to <baghou-All-Series>.
[ 5.793600] systemd[1]: Created slice System Slice.
[ 5.793676] systemd[1]: Listening on Syslog Socket.
[ 5.793685] systemd[1]: Reached target Remote File Systems.
[ 5.793722] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.793844] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.793880] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.793964] systemd[1]: Created slice User and Session Slice.
[ 6.204076] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[ 6.336396] lp: driver loaded but no devices found
[ 6.427951] ppdev: user-space parallel port driver
[ 6.459839] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
[ 6.548443] systemd-journald[271]: Received request to flush runtime journal from PID 1
[ 11.803383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.982818] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
[ 11.982823] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.982825] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 11.982828] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.982829] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[ 11.982831] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 11.982834] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.982834] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247)
[ 11.982837] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247)
[ 11.982839] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.982840] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.030598] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 12.030600] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 12.030600] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 12.030601] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 12.030601] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 12.557626] asus_wmi: ASUS WMI generic driver loaded
[ 13.008872] asus_wmi: Initialization: 0x0
[ 13.008901] asus_wmi: BIOS WMI version: 0.9
[ 13.008949] asus_wmi: SFUN value: 0x0
[ 13.009387] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 13.009476] asus_wmi: Number of fans: 1
[ 14.350705] audit: type=1400 audit(1538658128.041:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=556 comm="apparmor_parser"
[ 14.350708] audit: type=1400 audit(1538658128.041:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=556 comm="apparmor_parser"
[ 14.350709] audit: type=1400 audit(1538658128.041:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=556 comm="apparmor_parser"
[ 14.351370] audit: type=1400 audit(1538658128.041:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=553 comm="apparmor_parser"
[ 14.351372] audit: type=1400 audit(1538658128.041:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
[ 14.351374] audit: type=1400 audit(1538658128.041:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=553 comm="apparmor_parser"
[ 14.351375] audit: type=1400 audit(1538658128.041:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
[ 14.351397] audit: type=1400 audit(1538658128.041:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=558 comm="apparmor_parser"
[ 14.351417] audit: type=1400 audit(1538658128.041:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=557 comm="apparmor_parser"
[ 14.352399] audit: type=1400 audit(1538658128.045:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=560 comm="apparmor_parser"
[ 14.475896] AVX2 version of gcm_enc/dec engaged.
[ 14.475897] AES CTR mode by8 optimization enabled
[ 14.799972] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 14.799973] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 14.857350] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 15.204563] mt7650u_sta: loading out-of-tree module taints kernel.
[ 15.204921] mt7650u_sta: module verification failed: signature and/or required key missing - tainting kernel
[ 15.206717] rtusb init rt2870 --->
[ 15.206809]
=== pAd = 00000000aec9f171, size = 881760 ===
[ 15.206877] <-- RTMPAllocTxRxRingMemory, Status=0
[ 15.206929] <-- RTMPAllocAdapterBlock, Status=0
[ 15.206997] ==>RT65xx_WLAN_ChipOnOff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
[ 15.207519] MCUType = 2
[ 15.207634] NVM is EFUSE
[ 15.207634] Endpoint(8) is for In-band Command
[ 15.207635] Endpoint(4) is for WMM0 AC0
[ 15.207635] Endpoint(5) is for WMM0 AC1
[ 15.207636] Endpoint(6) is for WMM0 AC2
[ 15.207636] Endpoint(7) is for WMM0 AC3
[ 15.207636] Endpoint(9) is for WMM1 AC0
[ 15.207637] Endpoint(84) is for Data-In
[ 15.207637] Endpoint(85) is for Command Rsp
[ 15.207782] usbcore: registered new interface driver rt2870
[ 15.215007] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 15.215008] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.215009] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 15.215010] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 15.215011] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 15.215012] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 15.215013] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 15.215014] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 15.215015] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 15.226285] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.226319] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.226349] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.226377] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.226406] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 16.096227] intel_rapl: Found RAPL domain package
[ 16.096228] intel_rapl: Found RAPL domain core
[ 16.096229] intel_rapl: Found RAPL domain dram
[ 19.932830] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 20.090078] r8169 0000:03:00.0 enp3s0: link down
[ 20.090150] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 20.176402] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.178237] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 146.380637] rfkill: input handler disabled
[ 390.544064] usb 3-1: new high-speed USB device number 6 using xhci_hcd
[ 390.692731] usb 3-1: New USB device found, idVendor=1782, idProduct=4001
[ 390.692734] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 390.692737] usb 3-1: Product: Just5
[ 390.692739] usb 3-1: Manufacturer: Spreadtrum
[ 390.692740] usb 3-1: SerialNumber: 35079175993042
[ 408.086423] usb 3-1: USB disconnect, device number 6
[ 408.464049] usb 3-1: new high-speed USB device number 7 using xhci_hcd
[ 408.612807] usb 3-1: New USB device found, idVendor=1782, idProduct=5d20
[ 408.612810] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 408.612812] usb 3-1: Product: Just5
[ 408.612814] usb 3-1: Manufacturer: Spreadtrum
[ 408.612815] usb 3-1: SerialNumber: 35079175993042
[ 408.664833] usbcore: registered new interface driver cdc_ether
[ 408.667715] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1, RNDIS device, fe:40:d7:22:6f:67
[ 408.667736] usbcore: registered new interface driver rndis_host
[ 408.671447] rndis_host 3-1:1.0 enp0s20u1: renamed from usb0
[ 408.696928] IPv6: ADDRCONF(NETDEV_UP): enp0s20u1: link is not ready
[11757.036582] usb 3-1: USB disconnect, device number 7
[11757.036649] rndis_host 3-1:1.0 enp0s20u1: unregister 'rndis_host' usb-0000:00:14.0-1, RNDIS device
[11760.464894] usb 3-1: new high-speed USB device number 8 using xhci_hcd
[11760.613722] usb 3-1: New USB device found, idVendor=1782, idProduct=4001
[11760.613726] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[11760.613729] usb 3-1: Product: Just5
[11760.613732] usb 3-1: Manufacturer: Spreadtrum
[11760.613734] usb 3-1: SerialNumber: 35079175993042
[11770.191708] usb 3-1: USB disconnect, device number 8
[11770.632886] usb 3-1: new high-speed USB device number 9 using xhci_hcd
[11770.781502] usb 3-1: New USB device found, idVendor=1782, idProduct=5d20
[11770.781503] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[11770.781504] usb 3-1: Product: Just5
[11770.781505] usb 3-1: Manufacturer: Spreadtrum
[11770.781506] usb 3-1: SerialNumber: 35079175993042
[11770.783260] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1, RNDIS device, 6e:74:89:fa:de:66
[11770.789117] rndis_host 3-1:1.0 enp0s20u1: renamed from usb0
[11770.812334] IPv6: ADDRCONF(NETDEV_UP): enp0s20u1: link is not ready
[12656.360378] usbcore: registered new interface driver mt7610u
[13004.455126] -->RTUSBVenderReset
[13004.455235] <--RTUSBVenderReset
[13004.460197] fw version:0.1.00
[13004.460197] build:7640
[13004.460197] build time:
[13004.460198] 2
[13004.460198] 0
[13004.460198] 1
[13004.460198] 3
[13004.460199] 0
[13004.460199] 8
[13004.460199] 2
[13004.460199] 2
[13004.460200] 1
[13004.460200] 6
[13004.460200] 5
[13004.460200] 5
[13004.460201] _
[13004.460201] _
[13004.460201] _
[13004.460201] _
[13004.460202] ilm length = 68780(bytes)
[13004.460202] dlm length = 11476(bytes)
[13004.537083] #
[13004.542955] loading fw
[13004.543826] .
[13004.549797] .
[13004.555797] .
[13004.561797] .
[13004.567680] .
[13004.573547] .
[13004.657014] #
[13004.868562] RTMP_TimerListAdd: add timer obj ffffb28702fe0020!
[13004.868563] RTMP_TimerListAdd: add timer obj ffffb28702fe0070!
[13004.868563] RTMP_TimerListAdd: add timer obj ffffb28702fe00c0!
[13004.868564] RTMP_TimerListAdd: add timer obj ffffb28702fdffd0!
[13004.868565] RTMP_TimerListAdd: add timer obj ffffb28702fdfee0!
[13004.868565] RTMP_TimerListAdd: add timer obj ffffb28702fdff30!
[13004.868566] RTMP_TimerListAdd: add timer obj ffffb28702f72c58!
[13004.868567] RTMP_TimerListAdd: add timer obj ffffb28702f61b80!
[13004.868567] RTMP_TimerListAdd: add timer obj ffffb28702f61bd8!
[13004.868568] RTMP_TimerListAdd: add timer obj ffffb28702f72d68!
[13004.868568] RTMP_TimerListAdd: add timer obj ffffb28702f72bb8!
[13004.868569] RTMP_TimerListAdd: add timer obj ffffb28702f72d18!
[13004.868580] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
[13004.868581] Open file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed!
[13004.868581] 1. Phy Mode = 6
[13004.868582] ERROR!!!
[13004.868583] RTMPReadParametersHook failed, Status[=0x00000001]
[13004.923540] Bulk In Failed. Status=-2, BIIdx=0x0, BIRIdx=0x0, actual_length= 0x0
[13004.933587] CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x11080042) on !
[13004.933729] receive cmd msg fail(-2)
[13004.933750] tx_kickout_fail_count = 0
[13004.933751] tx_timeout_fail_count = 0
[13004.933751] rx_receive_fail_count = 0
[13004.933751] alloc_cmd_msg = 35
[13004.933752] free_cmd_msg = 35
[13004.933760] !!! rt28xx init fail !!!
avec à la fin :
[13004.868580] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
[13004.868581] Open file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed!
[13004.868581] 1. Phy Mode = 6
[13004.868582] ERROR!!!
[13004.868583] RTMPReadParametersHook failed, Status[=0x00000001]
[13004.923540] Bulk In Failed. Status=-2, BIIdx=0x0, BIRIdx=0x0, actual_length= 0x0
[13004.933587] CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x11080042) on !
[13004.933729] receive cmd msg fail(-2)
[13004.933750] tx_kickout_fail_count = 0
[13004.933751] tx_timeout_fail_count = 0
[13004.933751] rx_receive_fail_count = 0
[13004.933751] alloc_cmd_msg = 35
[13004.933752] free_cmd_msg = 35
[13004.933760] !!! rt28xx init fail !!!
normal j'ai viré les répertoires, mais il essaye apparemment de charger par là
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ ls /etc/Wireless/
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$
un autre site où il parle due même message d'erreur : https://www.linuxquestions.org/question … ed-921250/
d'où je sors les commandes :
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ dmesg | tail
[13004.868583] RTMPReadParametersHook failed, Status[=0x00000001]
[13004.923540] Bulk In Failed. Status=-2, BIIdx=0x0, BIRIdx=0x0, actual_length= 0x0
[13004.933587] CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x11080042) on !
[13004.933729] receive cmd msg fail(-2)
[13004.933750] tx_kickout_fail_count = 0
[13004.933751] tx_timeout_fail_count = 0
[13004.933751] rx_receive_fail_count = 0
[13004.933751] alloc_cmd_msg = 35
[13004.933752] free_cmd_msg = 35
[13004.933760] !!! rt28xx init fail !!!
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ dmesg | grep mt
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.035460] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 15.204563] mt7650u_sta: loading out-of-tree module taints kernel.
[ 15.204921] mt7650u_sta: module verification failed: signature and/or required key missing - tainting kernel
[12656.360378] usbcore: registered new interface driver mt7610u
Dernière modification par joshw (Le 04/10/2018, à 16:39)
Hors ligne
#82 Le 04/10/2018, à 19:25
- Mornagest
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Il y a cet autre module qui doit traîner depuis ta précédente compilation :
mt7650u_sta 917504 0
À mon avis, ça crée un conflit pour ta carte, et c'est sans doute ce qui fait que ton interface oscille entre wlan0 et ra0.
Essaie en éditant le fichier /etc/modprobe.d/blacklist.conf et en ajoutant mt7650u_sta tout à la fin. Ensuite, je te suggère de redémarrer pour que l'interface wi-fi adéquate soit chargée (sans doute wlan0 mais c'est pas sûr ).
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#83 Le 05/10/2018, à 08:07
- joshw
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Bonjour,
J'ai fait ce que tu m'as suggéré mais sans succès, car après le redémarrage, il reste des traces de l'ancien driver via lsmod :
baghou@baghou-All-Series:~$ lsmod
Module Size Used by
cfg80211 622592 0
intel_rapl 20480 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
kvm_intel 212992 0
kvm 598016 1 kvm_intel
irqbypass 16384 1 kvm
mt7650u_sta 917504 0
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
pcbc 16384 0
joydev 24576 0
input_leds 16384 0
eeepc_wmi 16384 0
wmi_bmof 16384 0
asus_wmi 28672 1 eeepc_wmi
aesni_intel 188416 0
sparse_keymap 16384 1 asus_wmi
snd_hda_codec_realtek 106496 1
snd_hda_codec_hdmi 49152 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_intel 40960 8
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 20480 1 snd_hda_codec
snd_pcm 98304 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
glue_helper 16384 1 aesni_intel
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
intel_cstate 20480 0
snd_rawmidi 32768 1 snd_seq_midi
intel_rapl_perf 16384 0
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
mei_me 40960 0
snd 81920 27 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
lpc_ich 24576 0
rndis_host 16384 0
mei 90112 1 mei_me
cdc_ether 16384 1 rndis_host
usbnet 45056 2 rndis_host,cdc_ether
mac_hid 16384 0
shpchp 36864 0
soundcore 16384 1 snd
sch_fq_codel 20480 3
parport_pc 36864 0
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
ip_tables 28672 0
x_tables 40960 1 ip_tables
autofs4 40960 2
amdgpu 2703360 0
chash 16384 1 amdgpu
hid_microsoft 16384 0
hid_generic 16384 0
usbhid 49152 0
uas 24576 0
hid 118784 3 hid_generic,usbhid,hid_microsoft
usb_storage 69632 1 uas
radeon 1470464 20
i2c_algo_bit 16384 2 amdgpu,radeon
ttm 106496 2 amdgpu,radeon
drm_kms_helper 172032 2 amdgpu,radeon
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 401408 17 amdgpu,radeon,ttm,drm_kms_helper
r8169 86016 0
ahci 36864 1
libahci 32768 1 ahci
mii 16384 2 r8169,usbnet
wmi 24576 2 asus_wmi,wmi_bmof
video 45056 1 asus_wmi
baghou@baghou-All-Series:~$ iwconfig
enp0s20u1 no wireless extensions.
ra0 Ralink STA
lo no wireless extensions.
enp3s0 no wireless extensions.
baghou@baghou-All-Series:~$ cat /etc/modprobe.d/blacklist.conf
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.
# evbug is a debug tool that should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
# replaced by tulip
blacklist de4x5
# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394
# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m
# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2
# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps
# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi
# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp
# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
#driver deffectueux
mt7650u_sta
baghou@baghou-All-Series:~$ cd Documents/test3/mt7610u-master/
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ ls
btmtk_usb include mt7610u.ko README_STA_usb
chips iwpriv_usage.txt mt7610u.mod.c RT2870STACard.dat
common mac mt7610u.mod.o RT2870STA.dat
conf Makefile mt7610u.o sta
COPYING mcu os sta_ate_iwpriv_usage.txt
doc mgmt phy
firmware modules.order rate_ctrl
hw_ctrl Module.symvers README.md
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo insmod mt7610u.ko
[sudo] Mot de passe de baghou :
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ iwconfig
enp0s20u1 no wireless extensions.
ra0 Ralink STA
lo no wireless extensions.
enp3s0 no wireless extensions.
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ lsmod
Module Size Used by
mt7610u 630784 0
cfg80211 622592 1 mt7610u
intel_rapl 20480 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
kvm_intel 212992 0
kvm 598016 1 kvm_intel
irqbypass 16384 1 kvm
mt7650u_sta 917504 0
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
pcbc 16384 0
joydev 24576 0
input_leds 16384 0
eeepc_wmi 16384 0
wmi_bmof 16384 0
asus_wmi 28672 1 eeepc_wmi
aesni_intel 188416 0
sparse_keymap 16384 1 asus_wmi
snd_hda_codec_realtek 106496 1
snd_hda_codec_hdmi 49152 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_intel 40960 8
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 20480 1 snd_hda_codec
snd_pcm 98304 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
glue_helper 16384 1 aesni_intel
cryptd 24576 3 crypto_simd,ghash_clmulni_intel,aesni_intel
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
intel_cstate 20480 0
snd_rawmidi 32768 1 snd_seq_midi
intel_rapl_perf 16384 0
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
mei_me 40960 0
snd 81920 27 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
lpc_ich 24576 0
rndis_host 16384 0
mei 90112 1 mei_me
cdc_ether 16384 1 rndis_host
usbnet 45056 2 rndis_host,cdc_ether
mac_hid 16384 0
shpchp 36864 0
soundcore 16384 1 snd
sch_fq_codel 20480 3
parport_pc 36864 0
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
ip_tables 28672 0
x_tables 40960 1 ip_tables
autofs4 40960 2
amdgpu 2703360 0
chash 16384 1 amdgpu
hid_microsoft 16384 0
hid_generic 16384 0
usbhid 49152 0
uas 24576 0
hid 118784 3 hid_generic,usbhid,hid_microsoft
usb_storage 69632 1 uas
radeon 1470464 20
i2c_algo_bit 16384 2 amdgpu,radeon
ttm 106496 2 amdgpu,radeon
drm_kms_helper 172032 2 amdgpu,radeon
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 401408 17 amdgpu,radeon,ttm,drm_kms_helper
r8169 86016 0
ahci 36864 1
libahci 32768 1 ahci
mii 16384 2 r8169,usbnet
wmi 24576 2 asus_wmi,wmi_bmof
video 45056 1 asus_wmi
baghou@baghou-All-Series:~/Documents/test3/mt7610u-master$ sudo ifconfig ra0 up
SIOCSIFFLAGS: Opération non permise
Je dois m'absenter,
@ plus tard
Dernière modification par joshw (Le 05/10/2018, à 08:09)
Hors ligne
#84 Le 05/10/2018, à 10:11
- Mornagest
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Est-ce que tu as encore ton dossier avec les sources de ce pilote ?
Avec un peu de chance, en te rendant dedans, la commande sudo make uninstall peut fonctionner (si c'est prévu par les développeurs...) afin de le virer du système.
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#85 Le 06/10/2018, à 10:04
- joshw
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Bonjour,
Merci pour cette énième réponse... j'aurais pu y penser, mais je ne l'ai pas fait (un point en moins pour moi)
voici ce que ça donne :
baghou@baghou-All-Series:~/Documents/test/mt7610u_wifi_sta_v3002_dpo_20130916-master$ sudo make uninstall
make -C /home/baghou/Documents/test/mt7610u_wifi_sta_v3002_dpo_20130916-master/os/linux -f Makefile.6 uninstall
make[1] : on entre dans le répertoire « /home/baghou/Documents/test/mt7610u_wifi_sta_v3002_dpo_20130916-master/os/linux »
rm -rf /lib/modules/4.15.0-36-generic/kernel/drivers/net/wireless/mt7650u_sta.ko
/sbin/depmod -a 4.15.0-36-generic
make[1] : on quitte le répertoire « /home/baghou/Documents/test/mt7610u_wifi_sta_v3002_dpo_20130916-master/os/linux »
baghou@baghou-All-Series:~/Documents/tes
je reboot
Hors ligne
#86 Le 06/10/2018, à 12:24
- Mornagest
Re : [RESOLU] Installation d'un driver wifi / Installation locale
C'est pas forcément intuitif, la compilation de paquets... moi-même, je pratique très peu à cause des dépendances en cascade.
N'oubliez pas de consulter la documentation pour vous donner un coup de main !
Merci de modifier le premier message de votre sujet pour ajouter [Résolu] lorsque votre problème l'est :)
Xubuntu 20.04 sur deux ordinateurs, zéro souci. Passez à Xubuntu ;)
Hors ligne
#87 Le 29/11/2018, à 15:09
- joshw
Re : [RESOLU] Installation d'un driver wifi / Installation locale
Salut, désolé pour mon absence depuis lors... Finalement, j'ai laissé tombé la compilation de ce driver, pour acheter une carte interne, soit une TP-LINK "TL-WDN4800" qui fonctionne sans souci. A peine connecté, au premier démarrage, elle a été reconnue, sans aucune manipulation.
Juste un mot: il faut faire attention à la configuration du clavier (pour entrer la clé wifi) qui chez moi, n'est pas bien configuré.
Encore merci pour votre aide!
Hors ligne