#1 Le 12/05/2019, à 10:13
- Charly42
plus de son sortie veille si ecran fermé uniquement
Bjr à tous,
je suis sous Xubuntu 18.04 et depuis quelques jours , plus de son mais uniquement lorsque je referme l'ecran de mon portable (à ce moment il passe en mise en veille).... !
Si je ferme l'ecran mais désactive la mise en veille: alors pas de pb!
C'est bien une mise en veille et non hibernation... (j 'ai tout de même appliquer la modif de la documentation du site doc.ubuntu-fr.org/veille_et_hibernation).
Si je met le pc en veille via clic sur bouton mise en veille: alors pas de pb au réveil j'ai du son... !!
J'ai purger cache , verifier si ma carte son est tjrs détecté au réveil ...
Actuellement la solution ultime:
pulseaudio -k && sudo alsa force-reloadEt là sa fonctionne!!
Je pige pas!!!
le truc qui peux aider: j'ai installé asunder (qui ne fonctionne pas sous 18.04!!) donc je l'ai désinstallé aussi vite
voila j'aimerais bien comprendre le pourquoi du comment
merci de votre aide
Hors ligne
#2 Le 12/05/2019, à 14:20
- noje
Re : plus de son sortie veille si ecran fermé uniquement
Bonjour,
Quand vous rencontrez le souci pouvez-vous taper dans un terminal la commande ci-dessous ?
dmesgEt nous copier le texte ici.....
Mille mercis.
- LTS 18.04 & 22.04 - jwm - cwm - zsh
Les seules vraies erreurs sont celles que nous commettons à répétition.
Les autres sont des occasions d'apprentissage. (Dalaï Lama)
Hors ligne
#3 Le 12/05/2019, à 15:10
- Charly42
Re : plus de son sortie veille si ecran fermé uniquement
c'est bien long!!!
3.332028] scsi host1: ahci
[ 3.332081] ata1: SATA max UDMA/133 abar m2048@0xa1317000 port 0xa1317100 irq 122
[ 3.332084] ata2: SATA max UDMA/133 abar m2048@0xa1317000 port 0xa1317180 irq 122
[ 3.418994] usb 1-3: New USB device found, idVendor=8087, idProduct=0025
[ 3.418997] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.420189] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.420203] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 3.437239] r8169 0000:01:00.1 eth0: RTL8411 at 0x (ptrval), 80:fa:5b:5b:43:43, XID 1c800800 IRQ 123
[ 3.437242] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.438524] r8169 0000:01:00.1 enp1s0f1: renamed from eth0
[ 3.544137] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 3.692967] usb 1-5: New USB device found, idVendor=0781, idProduct=556b
[ 3.692969] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.692971] usb 1-5: Product: Cruzer Edge
[ 3.692972] usb 1-5: Manufacturer: SanDisk
[ 3.692973] usb 1-5: SerialNumber: 2006087570143E1338CC
[ 3.808141] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.808176] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.810909] ata2.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[ 3.815743] ata1.00: ATA-9: LDLC, R0522A0, max UDMA/133
[ 3.815747] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.815791] ata2.00: configured for UDMA/133
[ 3.820185] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[ 3.827340] ata1.00: configured for UDMA/133
[ 3.827643] scsi 0:0:0:0: Direct-Access ATA LDLC 2A0 PQ: 0 ANSI: 5
[ 3.827993] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.828077] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.828090] sd 0:0:0:0: [sda] Write Protect is off
[ 3.828091] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.828109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.829763] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUD0N 1.00 PQ: 0 ANSI: 5
[ 3.830284] sda: sda1 sda2 sda3
[ 3.830698] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.039994] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.039998] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.040333] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.040510] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.059257] random: fast init done
[ 4.069357] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.072315] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.152417] usb 1-6: New USB device found, idVendor=04f2, idProduct=b59e
[ 4.152419] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.152421] usb 1-6: Product: Chicony USB2.0 Camera
[ 4.152422] usb 1-6: Manufacturer: Chicony Electronics Co.,Ltd.
[ 4.152423] usb 1-6: SerialNumber: 200901010001
[ 4.152790] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.160409] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.161173] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 4.162224] scsi host2: usb-storage 1-5:1.0
[ 4.162321] usbcore: registered new interface driver usb-storage
[ 4.163802] usbcore: registered new interface driver uas
[ 4.164783] usbcore: registered new interface driver usbhid
[ 4.164784] usbhid: USB HID core driver
[ 4.166566] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.0/0003:062A:5918.0001/input/input11
[ 4.224351] hid-generic 0003:062A:5918.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:15.0-2/input0
[ 4.224656] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.1/0003:062A:5918.0002/input/input12
[ 4.284568] hid-generic 0003:062A:5918.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:15.0-2/input1
[ 4.547104] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764]
[ 4.672750] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..]
[ 4.672757] psmouse serio2: synaptics: Your touchpad (PNP: SYN1221 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 4.792492] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.824394] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00223/0x840300/0x26800/0x0, board id: 3189, fw id: 2302754
[ 4.860631] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 4.955681] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.081134] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.100571] systemd[1]: Detected architecture x86-64.
[ 5.104119] systemd[1]: Set hostname to <charly-LDLC>.
[ 5.152123] systemd-fstab-generator[249]: x-systemd.device-timeout ignored for //mafreebox.freebox.fr/Disque dur
[ 5.184476] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Edge 1.26 PQ: 0 ANSI: 6
[ 5.184789] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.184942] sd 2:0:0:0: [sdb] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 5.185189] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.185191] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 5.185441] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.187543] sdb: sdb1
[ 5.188438] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 6.282460] systemd[1]: Reached target User and Group Name Lookups.
[ 6.282820] systemd[1]: Created slice System Slice.
[ 6.282911] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.283022] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.283185] systemd[1]: Listening on Journal Audit Socket.
[ 6.283269] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.283757] systemd[1]: Set up automount media-freebox.automount.
[ 6.312678] lp: driver loaded but no devices found
[ 6.313443] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 6.320052] ppdev: user-space parallel port driver
[ 6.386346] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 6.414580] systemd-journald[279]: Received request to flush runtime journal from PID 1
[ 6.419441] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.631135] input: Intel HID events as /devices/platform/INT33D5:00/input/input15
[ 6.631144] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.732143] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.741310] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.767085] [drm] Memory usable by graphics device = 4096M
[ 6.767089] checking generic (90000000 300000) vs hw (90000000 10000000)
[ 6.767091] fb: switching to inteldrmfb from EFI VGA
[ 6.767138] Console: switching to colour dummy device 80x25
[ 6.767249] [drm] Replacing VGA console driver
[ 6.767385] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.767386] [drm] Driver supports precise vblank timestamp query.
[ 6.767514] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.784908] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 6.785346] Intel(R) Wireless WiFi driver for Linux
[ 6.785347] Copyright(c) 2003- 2015 Intel Corporation
[ 6.785628] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 6.787151] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.787479] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 6.798931] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.798933] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.798933] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.798934] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.798935] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.811476] fbcon: inteldrmfb (fb0) is primary device
[ 6.811584] Console: switching to colour frame buffer device 240x67
[ 6.811623] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.814352] Bluetooth: Core ver 2.22
[ 6.814372] NET: Registered protocol family 31
[ 6.814373] Bluetooth: HCI device and connection manager initialized
[ 6.814377] Bluetooth: HCI socket layer initialized
[ 6.814379] Bluetooth: L2CAP socket layer initialized
[ 6.814385] Bluetooth: SCO socket layer initialized
[ 6.826755] SSE version of gcm_enc/dec engaged.
[ 6.832398] iwlwifi 0000:02:00.0: loaded firmware version 34.3125811985.0 op_mode iwlmvm
[ 6.846843] usbcore: registered new interface driver btusb
[ 6.852430] Bluetooth: hci0: Firmware revision 0.1 build 201 week 49 2017
[ 6.869824] random: crng init done
[ 6.869827] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.874659] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 9260, REV=0x324
[ 6.927376] iwlwifi 0000:02:00.0: base HW address: 0c:54:15:68:1d:84
[ 6.977715] intel_telemetry_core Init
[ 7.001811] intel_rapl: Found RAPL domain package
[ 7.001814] intel_rapl: Found RAPL domain core
[ 7.001815] intel_rapl: Found RAPL domain uncore
[ 7.001817] intel_rapl: Found RAPL domain dram
[ 7.013768] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.014077] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.014099] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 7.088380] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 7.695045] Adding 11773948k swap on /dev/sda2. Priority:-2 extents:1 across:11773948k SSFS
[ 7.808273] [drm] RC6 on
[ 8.577455] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 8.606355] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 8.606358] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.606359] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 8.606360] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.606361] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.606363] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 8.606364] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 8.621977] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17
[ 8.622040] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
[ 8.622095] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
[ 8.622179] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input20
[ 8.622449] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input21
[ 8.622500] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input22
[ 8.622556] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input23
[ 9.009652] audit: type=1400 audit(1557647349.097:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=791 comm="apparmor_parser"
[ 9.011021] audit: type=1400 audit(1557647349.097:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=789 comm="apparmor_parser"
[ 9.011024] audit: type=1400 audit(1557647349.097:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=789 comm="apparmor_parser"
[ 9.011026] audit: type=1400 audit(1557647349.097:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=789 comm="apparmor_parser"
[ 9.011028] audit: type=1400 audit(1557647349.097:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=789 comm="apparmor_parser"
[ 9.011203] audit: type=1400 audit(1557647349.097:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=793 comm="apparmor_parser"
[ 9.012057] audit: type=1400 audit(1557647349.101:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=788 comm="apparmor_parser"
[ 9.012061] audit: type=1400 audit(1557647349.101:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=788 comm="apparmor_parser"
[ 9.012507] audit: type=1400 audit(1557647349.101:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=794 comm="apparmor_parser"
[ 9.013376] audit: type=1400 audit(1557647349.101:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=792 comm="apparmor_parser"
[ 9.081391] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.081392] Bluetooth: BNEP filters: protocol multicast
[ 9.081397] Bluetooth: BNEP socket layer initialized
[ 9.567943] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 9.622078] r8169 0000:01:00.1 enp1s0f1: link down
[ 9.622241] r8169 0000:01:00.1 enp1s0f1: link down
[ 9.622329] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 9.628472] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 9.826890] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 9.904625] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 12.085313] r8169 0000:01:00.1 enp1s0f1: link up
[ 12.085332] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 20.702040] [UFW BLOCK] IN=enp1s0f1 OUT= MAC= SRC=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=249596 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 20.702085] [UFW BLOCK] IN=enp1s0f1 OUT= MAC= SRC=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=641798 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 20.702116] [UFW BLOCK] IN=enp1s0f1 OUT= MAC= SRC=fe80:0000:0000:0000:1911:1919:c800:65ab DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=782728 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 20.702159] [UFW BLOCK] IN=enp1s0f1 OUT= MAC= SRC=fe80:0000:0000:0000:1911:1919:c800:65ab DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=363695 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 20.712421] [UFW BLOCK] IN=enp1s0f1 OUT= MAC= SRC=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=249596 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 20.712444] [UFW BLOCK] IN=enp1s0f1 OUT= MAC= SRC=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=641798 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 20.712464] [UFW BLOCK] IN=enp1s0f1 OUT= MAC= SRC=fe80:0000:0000:0000:1911:1919:c800:65ab DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=782728 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 20.712496] [UFW BLOCK] IN=enp1s0f1 OUT= MAC= SRC=fe80:0000:0000:0000:1911:1919:c800:65ab DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=363695 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 56.598323] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 56.605898] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 56.645416] wlp2s0: authenticated
[ 56.646029] wlp2s0: associate with e4:9e:12:1d:89:87 (try 1/3)
[ 56.651355] wlp2s0: RX AssocResp from e4:9e:12:1d:89:87 (capab=0x411 status=0 aid=3)
[ 56.654287] wlp2s0: associated
[ 56.718721] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 56.841495] Bluetooth: RFCOMM TTY layer initialized
[ 56.841504] Bluetooth: RFCOMM socket layer initialized
[ 56.841510] Bluetooth: RFCOMM ver 1.11
[ 63.511062] FS-Cache: Loaded
[ 63.522928] FS-Cache: Netfs 'cifs' registered for caching
[ 63.523046] Key type cifs.spnego registered
[ 63.523052] Key type cifs.idmap registered
[ 137.533519] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 440.867411] wlp2s0: deauthenticating from e4:9e:12:1d:89:87 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 440.911507] PM: suspend entry (deep)
[ 440.911510] PM: Syncing filesystems ... done.
[ 440.922202] Freezing user space processes ... (elapsed 0.013 seconds) done.
[ 440.935806] OOM killer disabled.
[ 440.935807] Freezing remaining freezable tasks ... (elapsed 4.197 seconds) done.
[ 445.133144] Suspending console(s) (use no_console_suspend to debug)
[ 445.151541] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 445.151663] sd 0:0:0:0: [sda] Stopping disk
[ 445.796095] ACPI: EC: interrupt blocked
[ 445.836575] ACPI: Preparing to enter system sleep state S3
[ 445.944928] acpi INT3400:00: Unsupported event [0x86]
[ 445.944944] ACPI: EC: event blocked
[ 445.944945] ACPI: EC: EC stopped
[ 445.944947] PM: Saving platform NVS memory
[ 445.944958] Disabling non-boot CPUs ...
[ 445.959912] IRQ 123: no longer affine to CPU1
[ 445.959918] IRQ fixup: irq 128 move in progress, old vector 35
[ 445.959932] IRQ 128: no longer affine to CPU1
[ 445.960962] smpboot: CPU 1 is now offline
[ 445.983958] IRQ 126: no longer affine to CPU2
[ 445.983973] IRQ 127: no longer affine to CPU2
[ 445.983988] IRQ 130: no longer affine to CPU2
[ 445.985014] smpboot: CPU 2 is now offline
[ 446.007907] IRQ 122: no longer affine to CPU3
[ 446.007938] IRQ 129: no longer affine to CPU3
[ 446.008985] smpboot: CPU 3 is now offline
[ 446.015052] ACPI: Low-level resume complete
[ 446.015221] ACPI: EC: EC started
[ 446.015222] PM: Restoring platform NVS memory
[ 446.020205] Enabling non-boot CPUs ...
[ 446.020367] x86: Booting SMP configuration:
[ 446.020369] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 446.021620] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 446.022017] cache: parent cpu1 should not be sleeping
[ 446.022403] CPU1 is up
[ 446.022467] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 446.023733] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 446.024106] cache: parent cpu2 should not be sleeping
[ 446.024521] CPU2 is up
[ 446.024577] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 446.025846] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 446.026254] cache: parent cpu3 should not be sleeping
[ 446.026708] CPU3 is up
[ 446.036238] ACPI: Waking up from system sleep state S3
[ 446.144174] acpi INT3400:00: Unsupported event [0x86]
[ 446.251395] acpi INT3400:00: Unsupported event [0x86]
[ 446.252256] ACPI: EC: interrupt unblocked
[ 446.293852] ACPI: EC: event unblocked
[ 446.303947] sd 0:0:0:0: [sda] Starting disk
[ 446.339890] r8169 0000:01:00.1 enp1s0f1: link down
[ 446.676556] usb 1-6: reset high-speed USB device number 5 using xhci_hcd
[ 446.781639] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 446.781667] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 446.800873] ata2.00: configured for UDMA/133
[ 446.813985] ata1.00: configured for UDMA/133
[ 447.032058] usb 1-3: reset full-speed USB device number 3 using xhci_hcd
[ 447.442779] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764]
[ 447.566904] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..]
[ 447.689942] [drm] RC6 on
[ 448.817295] r8169 0000:01:00.1 enp1s0f1: link up
[ 449.333707] snd_hda_intel 0000:00:0e.0: azx_get_response timeout, switching to polling mode: last cmd=0x20bf8100
[ 450.341691] snd_hda_intel 0000:00:0e.0: No response from codec, disabling MSI: last cmd=0x20bf8100
[ 451.349667] snd_hda_intel 0000:00:0e.0: azx_get_response timeout, switching to single_cmd mode: last cmd=0x20bf8100
[ 451.349856] azx_single_wait_for_response: 17 callbacks suppressed
[ 451.369574] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5
[ 451.370017] acpi LNXPOWER:01: Turning OFF
[ 451.370059] acpi LNXPOWER:00: Turning OFF
[ 451.370091] OOM killer enabled.
[ 451.370112] Restarting tasks ... done.
[ 451.380905] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 451.381767] PM: suspend exit
[ 451.513987] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 451.562811] r8169 0000:01:00.1 enp1s0f1: link down
[ 451.562863] r8169 0000:01:00.1 enp1s0f1: link down
[ 451.562916] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 451.564603] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 451.583166] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 451.584143] Bluetooth: hci0: Device revision is 2
[ 451.584146] Bluetooth: hci0: Secure boot is enabled
[ 451.584147] Bluetooth: hci0: OTP lock is enabled
[ 451.584149] Bluetooth: hci0: API lock is enabled
[ 451.584150] Bluetooth: hci0: Debug lock is disabled
[ 451.584153] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 451.587056] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[ 451.771140] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 451.832763] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 453.009989] Bluetooth: hci0: Waiting for firmware download to complete
[ 453.010116] Bluetooth: hci0: Firmware loaded in 1394122 usecs
[ 453.010297] Bluetooth: hci0: Waiting for device to boot
[ 453.023354] Bluetooth: hci0: Device booted in 12857 usecs
[ 453.024065] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
[ 453.027326] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 454.703438] r8169 0000:01:00.1 enp1s0f1: link up
[ 454.703462] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 455.244988] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 455.250937] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 455.289541] wlp2s0: authenticated
[ 455.293619] wlp2s0: associate with e4:9e:12:1d:89:87 (try 1/3)
[ 455.299938] wlp2s0: RX AssocResp from e4:9e:12:1d:89:87 (capab=0x411 status=0 aid=6)
[ 455.303536] wlp2s0: associated
[ 455.315637] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 529.748373] azx_single_send_cmd: 197 callbacks suppressed
[ 1720.196538] wlp2s0: deauthenticating from e4:9e:12:1d:89:87 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1720.229331] PM: suspend entry (deep)
[ 1720.229333] PM: Syncing filesystems ... done.
[ 1720.237346] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1720.239614] OOM killer disabled.
[ 1720.239615] Freezing remaining freezable tasks ... (elapsed 3.851 seconds) done.
[ 1724.090849] Suspending console(s) (use no_console_suspend to debug)
[ 1724.091617] azx_single_send_cmd: 6 callbacks suppressed
[ 1724.111619] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1724.111726] sd 0:0:0:0: [sda] Stopping disk
[ 1724.752176] ACPI: EC: interrupt blocked
[ 1724.792423] ACPI: Preparing to enter system sleep state S3
[ 1724.900794] acpi INT3400:00: Unsupported event [0x86]
[ 1724.900808] ACPI: EC: event blocked
[ 1724.900809] ACPI: EC: EC stopped
[ 1724.900810] PM: Saving platform NVS memory
[ 1724.900821] Disabling non-boot CPUs ...
[ 1724.916022] IRQ 122: no longer affine to CPU1
[ 1724.918498] smpboot: CPU 1 is now offline
[ 1724.940022] IRQ 123: no longer affine to CPU2
[ 1724.941054] smpboot: CPU 2 is now offline
[ 1724.967990] IRQ 126: no longer affine to CPU3
[ 1724.968005] IRQ 127: no longer affine to CPU3
[ 1724.968019] IRQ 128: no longer affine to CPU3
[ 1724.968032] IRQ 129: no longer affine to CPU3
[ 1724.968046] IRQ 130: no longer affine to CPU3
[ 1724.969071] smpboot: CPU 3 is now offline
[ 1724.975102] ACPI: Low-level resume complete
[ 1724.975272] ACPI: EC: EC started
[ 1724.975274] PM: Restoring platform NVS memory
[ 1724.980332] Enabling non-boot CPUs ...
[ 1724.980532] x86: Booting SMP configuration:
[ 1724.980535] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1724.981788] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 1724.982170] cache: parent cpu1 should not be sleeping
[ 1724.982572] CPU1 is up
[ 1724.982653] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 1724.983918] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 1724.984317] cache: parent cpu2 should not be sleeping
[ 1724.984750] CPU2 is up
[ 1724.984821] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 1724.986092] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 1724.986448] cache: parent cpu3 should not be sleeping
[ 1724.986910] CPU3 is up
[ 1724.996419] ACPI: Waking up from system sleep state S3
[ 1725.105234] acpi INT3400:00: Unsupported event [0x86]
[ 1725.211718] acpi INT3400:00: Unsupported event [0x86]
[ 1725.212662] ACPI: EC: interrupt unblocked
[ 1725.253975] ACPI: EC: event unblocked
[ 1725.264211] sd 0:0:0:0: [sda] Starting disk
[ 1725.297793] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5
[ 1725.313826] r8169 0000:01:00.1 enp1s0f1: link down
[ 1725.641977] usb 1-3: reset full-speed USB device number 3 using xhci_hcd
[ 1725.741843] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1725.746587] ata2.00: configured for UDMA/133
[ 1725.785936] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1725.805064] ata1.00: configured for UDMA/133
[ 1725.918209] usb 1-6: reset high-speed USB device number 5 using xhci_hcd
[ 1726.109988] acpi LNXPOWER:01: Turning OFF
[ 1726.110087] acpi LNXPOWER:00: Turning OFF
[ 1726.110154] OOM killer enabled.
[ 1726.110155] Restarting tasks ...
[ 1726.134813] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 1726.135819] Bluetooth: hci0: Device revision is 2
[ 1726.135820] Bluetooth: hci0: Secure boot is enabled
[ 1726.135821] Bluetooth: hci0: OTP lock is enabled
[ 1726.135821] Bluetooth: hci0: API lock is enabled
[ 1726.135822] Bluetooth: hci0: Debug lock is disabled
[ 1726.135823] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 1726.135828] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[ 1726.135872] done.
[ 1726.139678] PM: suspend exit
[ 1726.433009] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764]
[ 1726.440227] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 1726.487675] r8169 0000:01:00.1 enp1s0f1: link down
[ 1726.487927] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 1726.488985] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1726.552074] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..]
[ 1726.597347] [drm] RC6 on
[ 1726.709390] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1726.781827] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1727.375195] Bluetooth: hci0: Waiting for firmware download to complete
[ 1727.375810] Bluetooth: hci0: Firmware loaded in 1227750 usecs
[ 1727.375839] Bluetooth: hci0: Waiting for device to boot
[ 1727.388877] Bluetooth: hci0: Device booted in 12753 usecs
[ 1727.388882] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
[ 1727.391801] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 1728.902976] r8169 0000:01:00.1 enp1s0f1: link up
[ 1728.902992] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 1730.194550] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1730.200534] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1730.322529] wlp2s0: authenticated
[ 1730.325833] wlp2s0: associate with e4:9e:12:1d:89:87 (try 1/3)
[ 1730.429914] wlp2s0: associate with e4:9e:12:1d:89:87 (try 2/3)
[ 1730.437843] iwlwifi 0000:02:00.0: Unhandled alg: 0x707
[ 1730.438613] iwlwifi 0000:02:00.0: Unhandled alg: 0x707
[ 1730.439628] iwlwifi 0000:02:00.0: Unhandled alg: 0x707
[ 1730.541771] wlp2s0: associate with e4:9e:12:1d:89:87 (try 3/3)
[ 1730.645720] wlp2s0: association with e4:9e:12:1d:89:87 timed out
[ 1731.658739] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1731.664725] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1731.769739] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1731.875487] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1731.977769] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1733.398648] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1733.404970] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1733.509896] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1733.615786] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1733.717860] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1735.640331] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1735.646324] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1735.749851] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1735.855531] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1735.957671] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1745.891185] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1745.897330] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1746.001580] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1746.107314] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1746.209741] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1759.313850] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1759.319855] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1759.425464] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1759.531132] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1759.633451] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1776.335696] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1776.342880] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1776.445404] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1776.551032] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1776.653370] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1780.885102] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1781.648238] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1781.654214] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1781.757311] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1781.863225] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1781.965167] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1792.764709] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1792.770723] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1792.873241] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1792.979015] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1793.081136] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1806.884115] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1807.648604] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1807.654596] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1807.757288] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1807.863669] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1807.965117] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1821.412518] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1821.419345] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1821.525027] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 1821.630739] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 3/3)
[ 1821.733012] wlp2s0: authentication with e4:9e:12:1d:89:87 timed out
[ 1824.124633] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=167 TC=0 HOPLIMIT=59 FLOWLBL=852539 PROTO=TCP SPT=993 DPT=35474 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 1825.300987] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=437073 PROTO=TCP SPT=143 DPT=40040 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 1827.739141] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=198 TC=0 HOPLIMIT=59 FLOWLBL=667199 PROTO=TCP SPT=993 DPT=35474 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1829.119055] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=886308 PROTO=TCP SPT=143 DPT=40040 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1831.527227] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=198 TC=0 HOPLIMIT=59 FLOWLBL=2771 PROTO=TCP SPT=993 DPT=35474 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1832.882483] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1833.094986] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=244331 PROTO=TCP SPT=143 DPT=40040 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1833.761365] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 1833.767295] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 1833.788597] wlp2s0: authenticated
[ 1833.792891] wlp2s0: associate with e4:9e:12:1d:89:87 (try 1/3)
[ 1833.825264] wlp2s0: RX AssocResp from e4:9e:12:1d:89:87 (capab=0x411 status=0 aid=6)
[ 1833.829833] wlp2s0: associated
[ 1833.875712] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1839.095029] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=198 TC=0 HOPLIMIT=59 FLOWLBL=125145 PROTO=TCP SPT=993 DPT=35474 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1840.915094] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a00:1450:4007:0808:0000:0000:0000:200e DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=60 TC=0 HOPLIMIT=123 FLOWLBL=46875 PROTO=TCP SPT=443 DPT=56034 WINDOW=0 RES=0x00 RST URGP=0
[ 1841.047039] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=555653 PROTO=TCP SPT=143 DPT=40040 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1855.407085] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=785215 PROTO=TCP SPT=143 DPT=40062 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 1855.407158] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=60 TC=0 HOPLIMIT=59 FLOWLBL=785215 PROTO=TCP SPT=143 DPT=40062 WINDOW=2048 RES=0x00 ACK FIN URGP=0
[ 1855.478607] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=60 TC=0 HOPLIMIT=59 FLOWLBL=785215 PROTO=TCP SPT=143 DPT=40062 WINDOW=2048 RES=0x00 ACK FIN URGP=0
[ 1855.714637] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=785215 PROTO=TCP SPT=143 DPT=40062 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1856.186785] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=785215 PROTO=TCP SPT=143 DPT=40062 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1856.227990] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=167 TC=0 HOPLIMIT=59 FLOWLBL=881340 PROTO=TCP SPT=993 DPT=35494 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 1858.631632] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=125 TC=0 HOPLIMIT=59 FLOWLBL=824247 PROTO=TCP SPT=993 DPT=35496 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 1859.236360] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=1008197 PROTO=TCP SPT=143 DPT=40070 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 1869.951101] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=166 TC=0 HOPLIMIT=59 FLOWLBL=421964 PROTO=TCP SPT=993 DPT=35468 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 1869.951170] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=91 TC=0 HOPLIMIT=59 FLOWLBL=421964 PROTO=TCP SPT=993 DPT=35468 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1888.726541] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=350523 PROTO=TCP SPT=143 DPT=40040 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 1916.630184] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=198 TC=0 HOPLIMIT=59 FLOWLBL=786548 PROTO=TCP SPT=993 DPT=35494 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 2753.476894] wlp2s0: deauthenticating from e4:9e:12:1d:89:87 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2753.510249] PM: suspend entry (deep)
[ 2753.510251] PM: Syncing filesystems ... done.
[ 2753.518905] Freezing user space processes ... (elapsed 0.016 seconds) done.
[ 2753.535251] OOM killer disabled.
[ 2753.535252] Freezing remaining freezable tasks ... (elapsed 1.214 seconds) done.
[ 2754.749718] Suspending console(s) (use no_console_suspend to debug)
[ 2754.750366] azx_single_send_cmd: 390 callbacks suppressed
[ 2754.771118] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2754.771264] sd 0:0:0:0: [sda] Stopping disk
[ 2755.495482] ACPI: EC: interrupt blocked
[ 2755.535881] ACPI: Preparing to enter system sleep state S3
[ 2755.644230] acpi INT3400:00: Unsupported event [0x86]
[ 2755.644245] ACPI: EC: event blocked
[ 2755.644246] ACPI: EC: EC stopped
[ 2755.644248] PM: Saving platform NVS memory
[ 2755.644259] Disabling non-boot CPUs ...
[ 2755.659268] IRQ 126: no longer affine to CPU1
[ 2755.661466] smpboot: CPU 1 is now offline
[ 2755.683314] IRQ 122: no longer affine to CPU2
[ 2755.683333] IRQ 127: no longer affine to CPU2
[ 2755.683346] IRQ 128: no longer affine to CPU2
[ 2755.685817] smpboot: CPU 2 is now offline
[ 2755.707303] IRQ 123: no longer affine to CPU3
[ 2755.708366] smpboot: CPU 3 is now offline
[ 2755.714275] ACPI: Low-level resume complete
[ 2755.714445] ACPI: EC: EC started
[ 2755.714447] PM: Restoring platform NVS memory
[ 2755.719487] Enabling non-boot CPUs ...
[ 2755.719656] x86: Booting SMP configuration:
[ 2755.719658] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2755.720912] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 2755.721293] cache: parent cpu1 should not be sleeping
[ 2755.721695] CPU1 is up
[ 2755.721757] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 2755.723023] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 2755.723392] cache: parent cpu2 should not be sleeping
[ 2755.723827] CPU2 is up
[ 2755.723887] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 2755.725156] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 2755.725581] cache: parent cpu3 should not be sleeping
[ 2755.726035] CPU3 is up
[ 2755.735544] ACPI: Waking up from system sleep state S3
[ 2755.736239] ACPI: button: The lid device is not compliant to SW_LID.
[ 2755.842445] acpi INT3400:00: Unsupported event [0x86]
[ 2755.950002] acpi INT3400:00: Unsupported event [0x86]
[ 2755.950484] ACPI: EC: interrupt unblocked
[ 2755.991957] ACPI: EC: event unblocked
[ 2756.002204] sd 0:0:0:0: [sda] Starting disk
[ 2756.032012] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5
[ 2756.122727] r8169 0000:01:00.1 enp1s0f1: link down
[ 2756.281302] usb 1-6: reset high-speed USB device number 5 using xhci_hcd
[ 2756.477036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2756.481731] ata2.00: configured for UDMA/133
[ 2756.513054] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2756.532205] ata1.00: configured for UDMA/133
[ 2756.557332] usb 1-3: reset full-speed USB device number 3 using xhci_hcd
[ 2756.751746] acpi LNXPOWER:01: Turning OFF
[ 2756.751821] acpi LNXPOWER:00: Turning OFF
[ 2756.751871] OOM killer enabled.
[ 2756.751873] Restarting tasks ... done.
[ 2756.764082] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 2756.764631] PM: suspend exit
[ 2756.775825] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 2756.776735] Bluetooth: hci0: Device revision is 2
[ 2756.776737] Bluetooth: hci0: Secure boot is enabled
[ 2756.776737] Bluetooth: hci0: OTP lock is enabled
[ 2756.776738] Bluetooth: hci0: API lock is enabled
[ 2756.776738] Bluetooth: hci0: Debug lock is disabled
[ 2756.776739] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 2756.777161] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[ 2756.910849] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 2756.958919] r8169 0000:01:00.1 enp1s0f1: link down
[ 2756.959016] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 2756.960348] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2757.149269] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764]
[ 2757.160777] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2757.234232] [drm] RC6 on
[ 2757.266836] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..]
[ 2757.373849] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2758.174479] Bluetooth: hci0: Waiting for firmware download to complete
[ 2758.174736] Bluetooth: hci0: Firmware loaded in 1376197 usecs
[ 2758.174859] Bluetooth: hci0: Waiting for device to boot
[ 2758.187775] Bluetooth: hci0: Device booted in 12689 usecs
[ 2758.187893] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
[ 2758.190937] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 2759.416695] r8169 0000:01:00.1 enp1s0f1: link up
[ 2759.416720] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 2759.773137] azx_single_send_cmd: 298 callbacks suppressed
[ 2760.786126] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 2760.792133] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 2760.831396] wlp2s0: authenticated
[ 2760.833146] wlp2s0: associate with e4:9e:12:1d:89:87 (try 1/3)
[ 2760.837164] wlp2s0: RX AssocResp from e4:9e:12:1d:89:87 (capab=0x411 status=0 aid=7)
[ 2760.840560] wlp2s0: associated
[ 2760.854417] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 2814.046331] CIFS VFS: Server mafreebox.freebox.fr has not responded in 120 seconds. Reconnecting...
[ 3229.395820] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[ 3638.268600] perf: interrupt took too long (3171 > 3152), lowering kernel.perf_event_max_sample_rate to 63000
[ 5006.448481] azx_single_send_cmd: 70 callbacks suppressed
[ 5006.869779] perf: interrupt took too long (3975 > 3963), lowering kernel.perf_event_max_sample_rate to 50250
[ 5024.254539] azx_single_send_cmd: 6 callbacks suppressed
[ 5029.843751] azx_single_send_cmd: 2 callbacks suppressed
[ 5029.863138] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5
[ 5045.340485] azx_single_send_cmd: 260 callbacks suppressed
[ 5061.074624] azx_single_send_cmd: 6 callbacks suppressed
[ 5061.094802] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5
[ 5061.313986] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5061.333573] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 5061.333576] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5061.333578] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 5061.333579] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5061.333581] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5061.333583] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 5061.333584] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 5061.345526] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input42
[ 5061.345697] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input43
[ 5061.345830] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input44
[ 5061.346025] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input45
[ 5061.346194] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input46
[ 5061.346312] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input47
[ 5061.346482] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input48
[ 5122.894454] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=166 TC=0 HOPLIMIT=59 FLOWLBL=218443 PROTO=TCP SPT=993 DPT=35902 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 5131.309143] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=294077 PROTO=TCP SPT=143 DPT=40476 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 5131.935929] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=167 TC=0 HOPLIMIT=59 FLOWLBL=541774 PROTO=TCP SPT=993 DPT=35908 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 5131.936001] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=91 TC=0 HOPLIMIT=59 FLOWLBL=541774 PROTO=TCP SPT=993 DPT=35908 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5132.005431] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=91 TC=0 HOPLIMIT=59 FLOWLBL=541774 PROTO=TCP SPT=993 DPT=35908 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5132.105400] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=294077 PROTO=TCP SPT=143 DPT=40476 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5132.241555] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=198 TC=0 HOPLIMIT=59 FLOWLBL=541774 PROTO=TCP SPT=993 DPT=35908 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5132.713367] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=198 TC=0 HOPLIMIT=59 FLOWLBL=541774 PROTO=TCP SPT=993 DPT=35908 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5133.065335] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=294077 PROTO=TCP SPT=143 DPT=40476 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5133.657586] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=198 TC=0 HOPLIMIT=59 FLOWLBL=541774 PROTO=TCP SPT=993 DPT=35908 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5133.717454] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=125 TC=0 HOPLIMIT=59 FLOWLBL=339332 PROTO=TCP SPT=993 DPT=35910 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 5133.717525] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=91 TC=0 HOPLIMIT=59 FLOWLBL=339332 PROTO=TCP SPT=993 DPT=35910 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5133.785175] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=91 TC=0 HOPLIMIT=59 FLOWLBL=339332 PROTO=TCP SPT=993 DPT=35910 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5134.021470] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=156 TC=0 HOPLIMIT=59 FLOWLBL=339332 PROTO=TCP SPT=993 DPT=35910 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5134.462445] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=1035492 PROTO=TCP SPT=143 DPT=40482 WINDOW=2048 RES=0x00 ACK PSH URGP=0
[ 5155.049279] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=197 TC=0 HOPLIMIT=59 FLOWLBL=196676 PROTO=TCP SPT=993 DPT=35902 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5192.296726] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=198 TC=0 HOPLIMIT=59 FLOWLBL=383743 PROTO=TCP SPT=993 DPT=35908 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5192.680870] [UFW BLOCK] IN=enp1s0f1 OUT= MAC=80:fa:5b:5b:43:43:e4:9e:12:1d:89:86:86:dd SRC=2a01:0e0c:0001:0000:0000:0000:0000:0143 DST=2a01:0e35:8a64:d420:1703:5e69:4cb8:9554 LEN=138 TC=0 HOPLIMIT=59 FLOWLBL=863482 PROTO=TCP SPT=143 DPT=40476 WINDOW=2048 RES=0x00 ACK PSH FIN URGP=0
[ 5585.989194] wlp2s0: deauthenticating from e4:9e:12:1d:89:87 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5586.025438] PM: suspend entry (deep)
[ 5586.025442] PM: Syncing filesystems ... done.
[ 5586.033946] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 5586.036103] OOM killer disabled.
[ 5586.036104] Freezing remaining freezable tasks ... (elapsed 6.716 seconds) done.
[ 5592.752706] Suspending console(s) (use no_console_suspend to debug)
[ 5592.766501] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5592.766589] sd 0:0:0:0: [sda] Stopping disk
[ 5593.438549] ACPI: EC: interrupt blocked
[ 5593.459831] ACPI: Preparing to enter system sleep state S3
[ 5593.568202] acpi INT3400:00: Unsupported event [0x86]
[ 5593.568219] ACPI: EC: event blocked
[ 5593.568220] ACPI: EC: EC stopped
[ 5593.568222] PM: Saving platform NVS memory
[ 5593.568234] Disabling non-boot CPUs ...
[ 5593.583076] IRQ fixup: irq 130 move in progress, old vector 34
[ 5593.583100] IRQ 130: no longer affine to CPU1
[ 5593.584137] smpboot: CPU 1 is now offline
[ 5593.607066] IRQ 126: no longer affine to CPU2
[ 5593.608106] smpboot: CPU 2 is now offline
[ 5593.630997] IRQ 122: no longer affine to CPU3
[ 5593.631013] IRQ 123: no longer affine to CPU3
[ 5593.631031] IRQ fixup: irq 127 move in progress, old vector 36
[ 5593.631045] IRQ 127: no longer affine to CPU3
[ 5593.631059] IRQ 128: no longer affine to CPU3
[ 5593.631073] IRQ 129: no longer affine to CPU3
[ 5593.632109] smpboot: CPU 3 is now offline
[ 5593.638117] ACPI: Low-level resume complete
[ 5593.638286] ACPI: EC: EC started
[ 5593.638287] PM: Restoring platform NVS memory
[ 5593.643338] Enabling non-boot CPUs ...
[ 5593.643495] x86: Booting SMP configuration:
[ 5593.643497] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5593.644750] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 5593.645130] cache: parent cpu1 should not be sleeping
[ 5593.645524] CPU1 is up
[ 5593.645590] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 5593.646858] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 5593.647232] cache: parent cpu2 should not be sleeping
[ 5593.647654] CPU2 is up
[ 5593.647715] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 5593.648984] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 5593.649360] cache: parent cpu3 should not be sleeping
[ 5593.649799] CPU3 is up
[ 5593.659306] ACPI: Waking up from system sleep state S3
[ 5593.766264] acpi INT3400:00: Unsupported event [0x86]
[ 5593.873981] acpi INT3400:00: Unsupported event [0x86]
[ 5593.874606] ACPI: EC: interrupt unblocked
[ 5593.915780] ACPI: EC: event unblocked
[ 5593.925981] sd 0:0:0:0: [sda] Starting disk
[ 5593.962865] r8169 0000:01:00.1 enp1s0f1: link down
[ 5594.209159] usb 1-3: reset full-speed USB device number 3 using xhci_hcd
[ 5594.404722] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5594.409497] ata2.00: configured for UDMA/133
[ 5594.472717] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5594.488882] usb 1-6: reset high-speed USB device number 5 using xhci_hcd
[ 5594.491831] ata1.00: configured for UDMA/133
[ 5595.072873] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764]
[ 5595.200710] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..]
[ 5595.649006] [drm] RC6 on
[ 5596.496429] r8169 0000:01:00.1 enp1s0f1: link up
[ 5596.956810] snd_hda_intel 0000:00:0e.0: azx_get_response timeout, switching to polling mode: last cmd=0x20bf8100
[ 5597.964804] snd_hda_intel 0000:00:0e.0: No response from codec, disabling MSI: last cmd=0x20bf8100
[ 5598.972759] snd_hda_intel 0000:00:0e.0: azx_get_response timeout, switching to single_cmd mode: last cmd=0x20bf8100
[ 5598.972971] azx_single_wait_for_response: 118 callbacks suppressed
[ 5598.992730] snd_hda_codec_hdmi hdaudioC0D2: Unable to sync register 0x2f0d00. -5
[ 5598.993179] acpi LNXPOWER:01: Turning OFF
[ 5598.993222] acpi LNXPOWER:00: Turning OFF
[ 5598.993252] OOM killer enabled.
[ 5598.993274] Restarting tasks ... done.
[ 5599.014488] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 5599.014947] PM: suspend exit
[ 5599.164987] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 5599.189648] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 5599.191647] Bluetooth: hci0: Device revision is 2
[ 5599.191650] Bluetooth: hci0: Secure boot is enabled
[ 5599.191651] Bluetooth: hci0: OTP lock is enabled
[ 5599.191652] Bluetooth: hci0: API lock is enabled
[ 5599.191653] Bluetooth: hci0: Debug lock is disabled
[ 5599.191655] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 5599.191661] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[ 5599.214667] r8169 0000:01:00.1 enp1s0f1: link down
[ 5599.214669] r8169 0000:01:00.1 enp1s0f1: link down
[ 5599.214767] IPv6: ADDRCONF(NETDEV_UP): enp1s0f1: link is not ready
[ 5599.216573] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5599.425124] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5599.491549] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5600.639472] Bluetooth: hci0: Waiting for firmware download to complete
[ 5600.639568] Bluetooth: hci0: Firmware loaded in 1416588 usecs
[ 5600.639620] Bluetooth: hci0: Waiting for device to boot
[ 5600.652606] Bluetooth: hci0: Device booted in 12727 usecs
[ 5600.652610] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
[ 5600.655616] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 5602.388893] r8169 0000:01:00.1 enp1s0f1: link up
[ 5602.388932] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 5602.904136] wlp2s0: authenticate with e4:9e:12:1d:89:87
[ 5602.910125] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 1/3)
[ 5603.056616] wlp2s0: send auth to e4:9e:12:1d:89:87 (try 2/3)
[ 5603.139323] wlp2s0: authenticated
[ 5603.140613] wlp2s0: associate with e4:9e:12:1d:89:87 (try 1/3)
[ 5603.243385] wlp2s0: RX AssocResp from e4:9e:12:1d:89:87 (capab=0x411 status=0 aid=7)
[ 5603.249064] wlp2s0: associated
[ 5603.275927] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes readyHors ligne
#4 Le 12/05/2019, à 16:53
- noje
Re : plus de son sortie veille si ecran fermé uniquement
Ouais c'est long, aucun bug visiblement....
Tu peux effacer le message ci-dessus, aucun message de bug pour le retour système du matériel et périphérique.
Juste pour info et si nécessaire ultérieurement, le module utilisé par ton système pour le son est snd_hda_intel
Selon la documentation ton soucis n'est pas un bug, mais un souci récurent, enfin peut-être pas à jour (c'est étonnant).
Regarde ICI :
https://doc.ubuntu-fr.org/son_problemes
Tout début de la page "Avant de se lancer dans des diagnostics avancés, assurez-vous de ne pas avoir quitté avec une mise en veille prolongée. Cette fonctionnalité permet en effet de relancer Ubuntu rapidement, mais ne permet pas à Ubuntu d'utiliser le périphérique de sortie audio."
Pas de panique il y'a toujours des solutions....
Quel est ton modèle de portable, et quelle version de Ubuntu as tu, pourvoir si bug ou si un tweak.
Dernière modification par noje (Le 12/05/2019, à 16:54)
- LTS 18.04 & 22.04 - jwm - cwm - zsh
Les seules vraies erreurs sont celles que nous commettons à répétition.
Les autres sont des occasions d'apprentissage. (Dalaï Lama)
Hors ligne
#5 Le 12/05/2019, à 17:32
- Charly42
Re : plus de son sortie veille si ecran fermé uniquement
Merci Noje,
alors PC "LDLC" donc pas une marque mais assemblé par eux.
OS: Ubuntu 18.04.2 LTS x86_64
Host: N75_77GU
Kernel: 4.15.0-48-generic
Uptime: 8 hours, 41 mins
Packages: 2065
Shell: bash 4.4.19
Resolution: 1920x1080
DE: Xfce
WM: Xfwm4
WM Theme: Numix
Theme: Voyager-BleuGrey-Dark [GTK2], Greybird [GTK3]
Icons: Elementary-xfce-dark [GTK2], Elementary-xfce-dark
Terminal: xfce4-terminal
Terminal Font: DejaVu Sans Mono 9
CPU: Intel Pentium Silver N5000 (4) @ 2.700GHz
GPU: Intel UHD Graphics 605 Version Ubuntu: Xubuntu 18.04 (version Voyager mais cela change rien).
Dernière modification par Charly42 (Le 12/05/2019, à 17:36)
Hors ligne
#6 Le 12/05/2019, à 18:42
- noje
Re : plus de son sortie veille si ecran fermé uniquement
Regarde au niveau du mixeur (mélangeur) dans les paramètres de ton environnement graphique.
Il y à un bug qui Switch la sortie en reprise de veille visiblement pour certains et qui fait sortir le son le HDMI qui est connu visiblement, tiens-nous au courant ici...
Sinon dans l'intervalle manuellement pour résoudre le souci à la main, fait d'abord un test en retour de veille en tapant ce qu'il y a dessous dans un terminal.
pulseaudio --kill; pulseaudio --start Redit si ça solutionne en temporaire...
- LTS 18.04 & 22.04 - jwm - cwm - zsh
Les seules vraies erreurs sont celles que nous commettons à répétition.
Les autres sont des occasions d'apprentissage. (Dalaï Lama)
Hors ligne
#7 Le 13/05/2019, à 14:14
- Charly42
Re : plus de son sortie veille si ecran fermé uniquement
noje a écrit :
Regarde au niveau du mixeur (mélangeur) dans les paramètres de ton environnement graphique.
Il y à un bug qui Switch la sortie en reprise de veille visiblement pour certains et qui fait sortir le son le HDMI qui est connu visiblement, tiens-nous au courant ici...Sinon dans l'intervalle manuellement pour résoudre le souci à la main, fait d'abord un test en retour de veille en tapant ce qu'il y a dessous dans un terminal.
pulseaudio --kill; pulseaudio --startRedit si ça solutionne en temporaire...
Ok merci je regarde çà fin de semaine
Hors ligne
#8 Le 18/05/2019, à 09:52
- Charly42
Re : plus de son sortie veille si ecran fermé uniquement
alors voila ce que j'ai fait : ajout de ce code:
options snd-hda-intel probe_mask=1dans le fichier /etc/modprobe.d/alsa-base.conf
je sais pas si c'est "propre" mais çà fonctionne
trouvé sur ce site:
https://help.ubuntu.com/community/HdaIn … probe_mask
Hors ligne