#1 Le 26/07/2019, à 17:28
- crocefisso
Lancement Ubuntu à partir d'une clé USB [RESOLU]
Bonjour à tous,
J'ai un portable Acer Swift 3 sur lequel est installé Windows, le portable ne dispose que d'un disque dur SSD et n'ai donc pas assez de place pour créer une partition Linux. J'ai donc acheté une clé USB 64 GO pour y installer ubuntu et pouvoir y accéder via ce pc. J'ai utilisé une clé USB Live (16.04) pour installer ubuntu sur la clé de 64 Go, tout s'est bien passé, mais lorsque j'accède au menu boot, la clé USB 64 Go n'apparaît pas (alors que la clé USB Live apparaît). Comment pourrais-je faire pour savoir d'où vient le problème et comment faire apparaître la clé 64 go dans le menu boot ?
Merci pour votre aide
Dernière modification par crocefisso (Le 27/07/2019, à 18:45)
Hors ligne
#2 Le 26/07/2019, à 17:36
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
J'ai utilisé une clé USB Live (14.04) pour installer ubuntu sur la clé de 64 Go
Très mauvaise idée. La version 14.04 est obsolète (source). Il fallait créer une LiveUSB Ubuntu 18.04
Hors ligne
#3 Le 26/07/2019, à 17:42
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Pardon, il s'agit d'un lapsus, j'ai installé la 16.04 (et non pas 14.04), qui est la version de la clé USB Live (je vais mettre à jour mon post). Je pensais faire la migration 16>18 une fois le système lancé. Malheureusement ma clé USB Live n'a qu'une capacité de 2Go et je ne peux donc pas y mettre 18.04 qui requiert 3Go. La procédure peut elle fonctionner avec 16.04?
Dernière modification par crocefisso (Le 26/07/2019, à 18:00)
Hors ligne
#4 Le 26/07/2019, à 17:58
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Puisqu'il s'agit d'une LiveUSB 16.04, tu peux faire un Boot-Info depuis une session Live (ordi démarré sur cette Live USB, choix "Essayer Ubuntu sans l'installer") et donner l'URL de ce Boot-Info dans ta réponse. Grâce à ce Boot-Info, on pourra vérifier dans quel mode de démarrage a été créée ton installation qui se trouve sur la clé USB de 64 Go et si cette installation possède bien ce qui est nécessaire pour qu'on puisse démarrer sur elle.
Hors ligne
#5 Le 26/07/2019, à 18:03
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Parfait merci beaucoup, voici le rapport :
Hors ligne
#6 Le 26/07/2019, à 18:44
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sda.
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector
25489712 of the same hard drive for core.img. core.img is at this location
and looks for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 2961314 of /dev/sda1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1.9 GiB, 2012217344 bytes, 3930112 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 3,930,111 3,928,064 b W95 FAT32
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 57.3 GiB, 61505273856 bytes, 120127488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 32 39,062,531 39,062,500 83 Linux
/dev/sdb2 39,063,550 120,125,439 81,061,890 5 Extended
/dev/sdb5 39,063,552 46,874,623 7,811,072 82 Linux swap / Solaris
/dev/sdb6 46,876,672 120,125,439 73,248,768 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 D9C6-64D2 vfat
/dev/sdb1 138457ce-e091-476b-baed-af2ed89b0aac ext4
/dev/sdb5 123cdf70-e0c3-4426-a579-12d7b8d184ac swap
/dev/sdb6 05616ccd-c2e5-4eba-93fc-9e698948d6cd ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 26 16:01 usb-Kingston_DataTraveler_2.0_200706200000000059188017-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 26 16:01 usb-Kingston_DataTraveler_2.0_200706200000000059188017-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 9 Jul 26 16:01 usb-SanDisk_Ultra_4C530000270530115475-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 26 16:01 usb-SanDisk_Ultra_4C530000270530115475-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jul 26 16:01 usb-SanDisk_Ultra_4C530000270530115475-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jul 26 16:01 usb-SanDisk_Ultra_4C530000270530115475-0:0-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 Jul 26 16:01 usb-SanDisk_Ultra_4C530000270530115475-0:0-part6 -> ../../sdb6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb1 /media/ubuntu/138457ce-e091-476b-baed-af2ed89b0aac ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb6 /media/ubuntu/05616ccd-c2e5-4eba-93fc-9e698948d6cd ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sda1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
# search path for the c32 support libraries (libcom32, libutil etc.)
path
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sda1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux/syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/ldlinux.c32 1
?? = ?? syslinux/libcom32.c32 1
?? = ?? syslinux/libutil.c32 1
?? = ?? syslinux/vesamenu.c32 1
============== sda1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/gfxboot.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/vesamenu.c32 : not a COM32/COM32R module
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 138457ce-e091-476b-baed-af2ed89b0aac
else
search --no-floppy --fs-uuid --set=root 138457ce-e091-476b-baed-af2ed89b0aac
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-138457ce-e091-476b-baed-af2ed89b0aac' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 138457ce-e091-476b-baed-af2ed89b0aac
else
search --no-floppy --fs-uuid --set=root 138457ce-e091-476b-baed-af2ed89b0aac
fi
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=138457ce-e091-476b-baed-af2ed89b0aac ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-31-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-138457ce-e091-476b-baed-af2ed89b0aac' {
menuentry 'Ubuntu, avec Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-138457ce-e091-476b-baed-af2ed89b0aac' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 138457ce-e091-476b-baed-af2ed89b0aac
else
search --no-floppy --fs-uuid --set=root 138457ce-e091-476b-baed-af2ed89b0aac
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=138457ce-e091-476b-baed-af2ed89b0aac ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-138457ce-e091-476b-baed-af2ed89b0aac' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 138457ce-e091-476b-baed-af2ed89b0aac
else
search --no-floppy --fs-uuid --set=root 138457ce-e091-476b-baed-af2ed89b0aac
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=138457ce-e091-476b-baed-af2ed89b0aac ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-138457ce-e091-476b-baed-af2ed89b0aac' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 138457ce-e091-476b-baed-af2ed89b0aac
else
search --no-floppy --fs-uuid --set=root 138457ce-e091-476b-baed-af2ed89b0aac
fi
echo 'Chargement de Linux 4.4.0-31-generic…'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=138457ce-e091-476b-baed-af2ed89b0aac ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-31-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=138457ce-e091-476b-baed-af2ed89b0aac / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb6 during installation
UUID=05616ccd-c2e5-4eba-93fc-9e698948d6cd /home ext4 defaults 0 2
# swap was on /dev/sdb5 during installation
#UUID=123cdf70-e0c3-4426-a579-12d7b8d184ac none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
8.495861053 = 9.122361344 boot/grub/grub.cfg 1
12.154464722 = 13.050757120 boot/grub/i386-pc/core.img 1
1.951889038 = 2.095824896 boot/vmlinuz-4.4.0-31-generic 1
1.951889038 = 2.095824896 vmlinuz 1
6.335948944 = 6.803173376 boot/initrd.img-4.4.0-31-generic 3
6.335948944 = 6.803173376 initrd.img 3
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/8663/mounts) leaked on lvs invocation. Parent PID 16177: bash
File descriptor 63 (pipe:[75079]) leaked on lvs invocation. Parent PID 16177: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20190726_1601 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sdb1:Ubuntu 16.04.1 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="D9C6-64D2" TYPE="vfat" PARTUUID="00018bb7-01"
/dev/loop0: TYPE="squashfs"
/dev/sdb1: UUID="138457ce-e091-476b-baed-af2ed89b0aac" TYPE="ext4" PARTUUID="1ed7bd41-01"
/dev/sdb5: UUID="123cdf70-e0c3-4426-a579-12d7b8d184ac" TYPE="swap" PARTUUID="1ed7bd41-05"
/dev/sdb6: UUID="05616ccd-c2e5-4eba-93fc-9e698948d6cd" TYPE="ext4" PARTUUID="1ed7bd41-06"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /media/ubuntu/138457ce-e091-476b-baed-af2ed89b0aac/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jul 19 2016 grub.d
total 76
-rwxr-xr-x 1 root root 9791 Jun 17 2016 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 Jun 17 2016 10_linux
-rwxr-xr-x 1 root root 11082 Jun 17 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== /media/ubuntu/138457ce-e091-476b-baed-af2ed89b0aac/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,0000,2001,2002,2003
Boot0000* Windows Boot Manager HD(1,GPT,db8acde9-4bc9-4dd0-a163-507b64eb36c8,0x800,0x32000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* Linpus lite HD(1,MBR,0x4294967223,0x800,0x3bf000)/File(EFIBootgrubx64.efi)RC
Boot0003* Network Boot-IPV4: 00-0E-C6-F4-FD-98 PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/MAC(000ec6f4fd98,1)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sdb1 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /media/ubuntu/138457ce-e091-476b-baed-af2ed89b0aac.
sdb6 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /media/ubuntu/05616ccd-c2e5-4eba-93fc-9e698948d6cd.
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, not-mmc, has-os, 32 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:2012MB:scsi:512:512:msdos:Kingston DataTraveler 2.0:;
1:1049kB:2012MB:2011MB:fat32::boot;
BYT;
/dev/sdb:61.5GB:scsi:512:512:msdos:SanDisk Ultra:;
1:16.4kB:20.0GB:20.0GB:ext4::boot;
2:20.0GB:61.5GB:41.5GB:::;
5:20.0GB:24.0GB:3999MB:linux-swap(v1)::;
6:24.0GB:61.5GB:37.5GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 1.9G
sda1 part vfat 1.9G
sdb disk 57.3G
sdb1 part ext4 18.6G
sdb2 part 1K
sdb5 part swap 3.7G
sdb6 part ext4 35G
loop0 loop squashfs 1.4G
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 1 running
sda1 1 0 1 /cdrom
sdb 1 0 1 running
sdb1 1 0 1 /media/ubuntu/138457ce-e091-476b-baed-af2ed89b0aac
sdb2 1 0 1
sdb5 1 0 1 [SWAP]
sdb6 1 0 1 /media/ubuntu/05616ccd-c2e5-4eba-93fc-9e698948d6cd
loop0 1 1 0 /rofs
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4013208k,nr_inodes=1003302,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=805568k,mode=755)
/dev/sda1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=805568k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sdb6 on /media/ubuntu/05616ccd-c2e5-4eba-93fc-9e698948d6cd type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
/dev/sdb1 on /media/ubuntu/138457ce-e091-476b-baed-af2ed89b0aac type ext4 (rw,nosuid,nodev,relatime,data=ordered,uhelper=udisks2)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb5 sdb6 size slaves stat subsystem trace uevent
/dev (filtered): acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sdb sdb1 sdb2 sdb5 sdb6 sg0 sg1 shm snapshot snd stderr stdin stdout tpm0 uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 787M 9.6M 778M 2% /run
/dev/sda1 vfat 1.9G 1.5G 472M 76% /cdrom
/dev/loop0 squashfs 1.4G 1.4G 0 100% /rofs
/cow overlay 3.9G 134M 3.8G 4% /
tmpfs tmpfs 3.9G 196K 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 264K 3.9G 1% /tmp
tmpfs tmpfs 787M 92K 787M 1% /run/user/999
/dev/sdb6 ext4 35G 49M 33G 1% /media/ubuntu/05616ccd-c2e5-4eba-93fc-9e698948d6cd
/dev/sdb1 ext4 19G 4.4G 13G 26% /media/ubuntu/138457ce-e091-476b-baed-af2ed89b0aac
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/loop0: 1.4 GiB, 1459982336 bytes, 2851528 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 1.9 GiB, 2012217344 bytes, 3930112 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00018bb7
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 3930111 3928064 1.9G b W95 FAT32
Disk /dev/sdb: 57.3 GiB, 61505273856 bytes, 120127488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1ed7bd41
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 32 39062531 39062500 18.6G 83 Linux
/dev/sdb2 39063550 120125439 81061890 38.7G 5 Extended
/dev/sdb5 39063552 46874623 7811072 3.7G 82 Linux swap / Solaris
/dev/sdb6 46876672 120125439 73248768 35G 83 Linux
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sdb1 into the MBR of sdb.
Additional repair would be performed: unhide-bootmenu-10s
=================== Advice in case of suggested repair
The boot of your PC is in EFI mode, but no EFI partition was detected. You may want to retry after creating a EFI partition (FAT32, 100MB~250MB, start of the disk, boot flag).
Do you want to continue?
=================== User settings
The settings chosen by the user will not act on the boot.
Il y a une chose très étrange : on ne voit pas le SSD interne que tu as évoqué dans le post #1 : on ne voit que la LiveUSB Kingston et la clé USB SanDisk dans laquelle tu as installé Ubuntu 16.04 dans cet extrait du Boot-Info :
=================== parted -lm:
BYT;
/dev/sda:2012MB:scsi:512:512:msdos:Kingston DataTraveler 2.0:;
1:1049kB:2012MB:2011MB:fat32::boot;
BYT;
/dev/sdb:61.5GB:scsi:512:512:msdos:SanDisk Ultra:;
1:16.4kB:20.0GB:20.0GB:ext4::boot;
2:20.0GB:61.5GB:41.5GB:::;
5:20.0GB:24.0GB:3999MB:linux-swap(v1)::;
6:24.0GB:61.5GB:37.5GB:ext4::;
Est-ce que c'est toi qui a déconnecté exprès ce SSD ou bien ?
D'autre part, ce serait bien que tu donnes le nom complet de ton Acer Swift 3. Dans la Liste des portables « Acer », on peut en voir quelques-uns (par exemple le modèle SF314-51-39ZJ). Donne le nom complet du tien, ce sera utile.
Hors ligne
#7 Le 26/07/2019, à 19:05
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Le nom complet du modèle est : Acer Swift 3 SF314-54-59J4. Apparemment il figure dans la liste, où il est indiqué "Il faut dans le BIOS passer de IDE/RAID à AHCI afin de pouvoir installer Ubuntu". Toutefois je ne vois pas de possibilité de choisir cette option dans le BIOS...
A propos du SSD qui n'a apparaît pas. Ce portable possède un SSD 256 Go SPCIe et rien d'autre. Sur ce SSD windows 10 était installé par défaut et je n'ai pas installé d'autre OS. J'écris en ce moment à partir de ce portable, mais je suis sous Ubuntu via le live USB kingston, est aussi pluggée la clé SanDisk ou j'ai voulu installer un OS Ubuntu. Pour lancer Ubuntu à partir du kingston, j'ai seulement fait un F12 (j'ai du activer au préalable une option de boot dans le BIOS) et ai choisi de booter sur linux. Donc, je n'ai donc pas explicitement désactivé le SSD et je ne sais pas pourquoi il n'apparait pas. Peut être que Boot-info de gère pas les partitions NTFS...
Hors ligne
#8 Le 26/07/2019, à 19:18
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
"Il faut dans le BIOS passer de IDE/RAID à AHCI afin de pouvoir installer Ubuntu". Toutefois je ne vois pas de possibilité de choisir cette option dans le BIOS...
Le paramètre est nommé "SATA Mode" dans le Bios et il y a deux possibilités : "RST with Optane" ou bien "AHCI" (voir ce post de Ioan) EDIT : encore mieux, j'ai trouvé cette photo : https://us.v-cdn.net/6029997/uploads/ed … nbhrj4.jpg issue de cette discussion sur le forum Acer.
Dernière modification par malbo (Le 27/07/2019, à 07:44)
Hors ligne
#9 Le 26/07/2019, à 19:27
- lucmars
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Si en RAID le ssd est invisible.
Par ailleurs t'as installé buntu en mode non-efi. Si ton bios reste en efi (d'ailleurs t'as fais le boot-info sous session efi) alors il ne voit pas ta clef, il la verra si tu passe le bios en non-efi (legacy, hérité) et ça devrait le faire.
Gaulois Matter !
Hors ligne
#10 Le 26/07/2019, à 19:30
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Je viens de faire "RST with Optane" > "AHCI" dans le BIOS. Cela n'a pas fait apparaître le SanDisk dans le boot menu, mais par contre ça a crée une erreur lors du démarage de Windows. J'ai du remettre "RST with Optane" pour pouvoir faire fonctionner Windows (OS depuis lequel j'écris ce post).
Hors ligne
#11 Le 26/07/2019, à 19:37
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Donc si je comprends bien, Ubuntu sur kingston est en mode efi et Ubuntu sur sandisk est en mode non efi. Est-il possible de reinstaller Ubuntu sur sandisk en mode efi, car je n'arrive pas à passer en mode non efi via le BIOS (je ne vois pas de mode legacy...) ?
Dernière modification par crocefisso (Le 26/07/2019, à 20:18)
Hors ligne
#12 Le 26/07/2019, à 20:32
- lucmars
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
@lucmars, donc si je te suis l'OS sur kingston est en mode efi et l'OS sandisk en mode non efi. Est-il possible de reinstaller l'OS sandisk en mode efi, car je n'arrive pas à passer en mode non efi via le bios... ?
Tres exactement, ta clef live peut booter en efi ou en non-efi.
Apparemment, si t'as pas d'option non-efi dans ton bios, faut croire que l'installateur a décidé de faire une installe non-efi vu que ta 64g à une table de partition ms-dos (pour du non-efi) au lieu de gpt (pour du efi).
Pour installer en mode efi, tu rebootes sur ta clef live, tu branches ta 64g, puis avec gparted tu selectionnes la 64g et quelque part t'as l'option pour convertir sa table ms-dos en table gpt. Cela effacera tout.
Vu que t'as rétabli le raid du ssd, ce dernier reste à l'abri, car invisible, et tu peux installer sur ta 64g en efi, l'installateur devrait faire tout ce qu'il faut sur ta 64g
Gaulois Matter !
Hors ligne
#13 Le 26/07/2019, à 21:49
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Parfait, ça a marché, le problème venait bien de la table ms-dos. Merci beaucoup, je n'aurais pas trouvé tout seul. J'ai aussi crée une partition de boot EFI lorsque l'installateur me l'a proposé. Pour info voici mon nouveau rapport boot-info.
Dernière modification par crocefisso (Le 26/07/2019, à 23:54)
Hors ligne
#14 Le 27/07/2019, à 06:17
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Bonjour,
Le Boot-Info dont tu as donné le lien dans ton dernier post est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 57.3 GiB, 61505273856 bytes, 120127488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 120,127,487 120,127,487 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 40,962,047 40,960,000 Data partition (Linux)
/dev/sda2 40,962,048 49,154,047 8,192,000 Swap partition (Linux)
/dev/sda3 49,154,048 117,513,422 68,359,375 Data partition (Linux)
/dev/sda4 117,514,240 120,125,439 2,611,200 EFI System partition
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/sda1 28df71d1-d49c-4f5b-a9ff-d9be242cb005 ext4 root
/dev/sda2 72bf5c3a-7f8a-4719-a15a-8738c742e94d swap
/dev/sda3 e0421772-1629-4d8a-a3e3-f4f961a66af7 ext4 home
/dev/sda4 2BDA-B1F5 vfat
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jul 26 23:52 usb-SanDisk_Ultra_4C530000270530115475-0:0 -> ../../sda
lrwxrwxrwx 1 root root 10 Jul 26 23:52 usb-SanDisk_Ultra_4C530000270530115475-0:0-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jul 26 23:52 usb-SanDisk_Ultra_4C530000270530115475-0:0-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jul 26 23:52 usb-SanDisk_Ultra_4C530000270530115475-0:0-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jul 26 23:52 usb-SanDisk_Ultra_4C530000270530115475-0:0-part4 -> ../../sda4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda3 /home ext4 (rw,relatime,stripe=32684,data=ordered)
/dev/sda4 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 28df71d1-d49c-4f5b-a9ff-d9be242cb005
else
search --no-floppy --fs-uuid --set=root 28df71d1-d49c-4f5b-a9ff-d9be242cb005
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-28df71d1-d49c-4f5b-a9ff-d9be242cb005' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 28df71d1-d49c-4f5b-a9ff-d9be242cb005
else
search --no-floppy --fs-uuid --set=root 28df71d1-d49c-4f5b-a9ff-d9be242cb005
fi
linux /boot/vmlinuz-4.15.0-55-generic root=UUID=28df71d1-d49c-4f5b-a9ff-d9be242cb005 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-55-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-28df71d1-d49c-4f5b-a9ff-d9be242cb005' {
menuentry 'Ubuntu, avec Linux 4.15.0-55-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-55-generic-advanced-28df71d1-d49c-4f5b-a9ff-d9be242cb005' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 28df71d1-d49c-4f5b-a9ff-d9be242cb005
else
search --no-floppy --fs-uuid --set=root 28df71d1-d49c-4f5b-a9ff-d9be242cb005
fi
echo 'Chargement de Linux 4.15.0-55-generic…'
linux /boot/vmlinuz-4.15.0-55-generic root=UUID=28df71d1-d49c-4f5b-a9ff-d9be242cb005 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-55-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-55-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-55-generic-recovery-28df71d1-d49c-4f5b-a9ff-d9be242cb005' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 28df71d1-d49c-4f5b-a9ff-d9be242cb005
else
search --no-floppy --fs-uuid --set=root 28df71d1-d49c-4f5b-a9ff-d9be242cb005
fi
echo 'Chargement de Linux 4.15.0-55-generic…'
linux /boot/vmlinuz-4.15.0-55-generic root=UUID=28df71d1-d49c-4f5b-a9ff-d9be242cb005 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-55-generic
}
menuentry 'Ubuntu, avec Linux 4.4.0-157-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-157-generic-advanced-28df71d1-d49c-4f5b-a9ff-d9be242cb005' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 28df71d1-d49c-4f5b-a9ff-d9be242cb005
else
search --no-floppy --fs-uuid --set=root 28df71d1-d49c-4f5b-a9ff-d9be242cb005
fi
echo 'Chargement de Linux 4.4.0-157-generic…'
linux /boot/vmlinuz-4.4.0-157-generic root=UUID=28df71d1-d49c-4f5b-a9ff-d9be242cb005 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-157-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-157-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-157-generic-recovery-28df71d1-d49c-4f5b-a9ff-d9be242cb005' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 28df71d1-d49c-4f5b-a9ff-d9be242cb005
else
search --no-floppy --fs-uuid --set=root 28df71d1-d49c-4f5b-a9ff-d9be242cb005
fi
echo 'Chargement de Linux 4.4.0-157-generic…'
linux /boot/vmlinuz-4.4.0-157-generic root=UUID=28df71d1-d49c-4f5b-a9ff-d9be242cb005 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.4.0-157-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=28df71d1-d49c-4f5b-a9ff-d9be242cb005 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb4 during installation
UUID=2BDA-B1F5 /boot/efi vfat umask=0077 0 1
# /home was on /dev/sdb3 during installation
UUID=e0421772-1629-4d8a-a3e3-f4f961a66af7 /home ext4 defaults 0 2
# swap was on /dev/sdb2 during installation
UUID=72bf5c3a-7f8a-4719-a15a-8738c742e94d none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
16.222942352 = 17.419251712 boot/grub/grub.cfg 3
10.989166260 = 11.799527424 boot/vmlinuz-4.15.0-55-generic 1
12.945182800 = 13.899784192 boot/vmlinuz-4.4.0-157-generic 1
10.989166260 = 11.799527424 vmlinuz 1
11.849613190 = 12.723425280 boot/initrd.img-4.15.0-55-generic 2
11.778827667 = 12.647419904 boot/initrd.img-4.4.0-157-generic 3
11.849613190 = 12.723425280 initrd.img 2
========================== sda4/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 28df71d1-d49c-4f5b-a9ff-d9be242cb005 root hd0,gpt1
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
ADDITIONAL INFORMATION :
=================== log of boot-info 20190726_2352 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-55-generic root=UUID=28df71d1-d49c-4f5b-a9ff-d9be242cb005 ro quiet splash vt.handoff=1
=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 18.04.2 LTS CurrentSession:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: LABEL="root" UUID="28df71d1-d49c-4f5b-a9ff-d9be242cb005" TYPE="ext4" PARTLABEL="/" PARTUUID="1dd29ace-6baf-49bd-a64b-71225e471a40"
/dev/sda2: UUID="72bf5c3a-7f8a-4719-a15a-8738c742e94d" TYPE="swap" PARTUUID="ba99c316-0fd4-4308-9dfb-160051647447"
/dev/sda3: LABEL="home" UUID="e0421772-1629-4d8a-a3e3-f4f961a66af7" TYPE="ext4" PARTLABEL="/home" PARTUUID="bb8dd49e-23c8-45bb-a222-84821d9e48b0"
/dev/sda4: UUID="2BDA-B1F5" TYPE="vfat" PARTUUID="7ab2a76a-2b9c-4a48-aa79-d74ed09f706f"
/dev/loop8: TYPE="squashfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 26 22:33 grub.d
total 80
-rwxr-xr-x 1 root root 10046 mars 18 17:11 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12693 mars 18 17:11 10_linux
-rwxr-xr-x 1 root root 11298 mars 18 17:11 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 mars 18 17:11 30_os-prober
-rwxr-xr-x 1 root root 1418 juin 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 17 2016 40_custom
-rwxr-xr-x 1 root root 216 juin 17 2016 41_custom
-rw-r--r-- 1 root root 483 juin 17 2016 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda1: UUID=2BDA-B1F5 (sda4)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,0000,2001,2002,2003
Boot0000* Windows Boot Manager HD(1,GPT,db8acde9-4bc9-4dd0-a163-507b64eb36c8,0x800,0x32000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* ubuntu HD(4,GPT,7ab2a76a-2b9c-4a48-aa79-d74ed09f706f,0x7012000,0x27d800)/File(EFIubuntushimx64.efi)
Boot0003* Network Boot-IPV4: 00-0E-C6-F4-FD-98 PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/MAC(000ec6f4fd98,1)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, .
sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /home.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, usb-disk, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:61.5GB:scsi:512:512:gpt:SanDisk Ultra:;
1:1049kB:21.0GB:21.0GB:ext4:/:;
2:21.0GB:25.2GB:4194MB:linux-swap(v1)::;
3:25.2GB:60.2GB:35.0GB:ext4:/home:;
4:60.2GB:61.5GB:1337MB:fat32::boot, esp;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 88,5M
loop1 loop squashfs 3,7M
loop2 loop squashfs 1008K
loop3 loop squashfs 4M
loop4 loop squashfs 14,8M
loop5 loop squashfs 54,4M
loop6 loop squashfs 149,9M
loop7 loop squashfs 42,8M
loop8 loop squashfs 140,7M
sda disk 57,3G
sda1 part ext4 19,5G root
sda2 part swap 3,9G
sda3 part ext4 32,6G home
sda4 part vfat 1,3G
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /snap/core/7270
loop1 1 1 0 /snap/gnome-system-monitor/100
loop2 1 1 0 /snap/gnome-logs/61
loop3 1 1 0 /snap/gnome-calculator/406
loop4 1 1 0 /snap/gnome-characters/296
loop5 1 1 0 /snap/core18/1066
loop6 1 1 0 /snap/gnome-3-28-1804/67
loop7 1 1 0 /snap/gtk-common-themes/1313
loop8 1 1 0 /snap/gnome-3-26-1604/90
sda 1 0 1 running
sda1 1 0 1 /
sda2 1 0 1 [SWAP]
sda3 1 0 1 /home
sda4 1 0 1 /boot/efi
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4002320k,nr_inodes=1000580,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=804884k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1308)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
/var/lib/snapd/snaps/core_7270.snap on /snap/core/7270 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_100.snap on /snap/gnome-system-monitor/100 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_61.snap on /snap/gnome-logs/61 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_406.snap on /snap/gnome-calculator/406 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_296.snap on /snap/gnome-characters/296 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1066.snap on /snap/core18/1066 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1313.snap on /snap/gtk-common-themes/1313 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_67.snap on /snap/gnome-3-28-1804/67 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_90.snap on /snap/gnome-3-26-1604/90 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda3 on /home type ext4 (rw,relatime,stripe=32684,data=ordered)
/dev/sda4 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/122 type tmpfs (rw,nosuid,nodev,relatime,size=804880k,mode=700,uid=122,gid=105)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=804880k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/dev (filtered): acpi_thermal_rel autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sg0 shm snapshot snd stderr stdin stdout tpm0 tpmrm0 uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda4
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 20 00 40 00 00 20 01 07 |........ .@.. ..|
00000020 00 d8 27 00 f2 09 00 00 00 00 00 00 02 00 00 00 |..'.............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 f5 b1 da 2b 4e 4f 20 4e 41 4d 45 20 20 |..)...+NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 787M 1.9M 785M 1% /run
/dev/sda1 ext4 20G 5.2G 13G 29% /
tmpfs tmpfs 3.9G 143M 3.7G 4% /dev/shm
tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/loop0 squashfs 89M 89M 0 100% /snap/core/7270
/dev/loop1 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/100
/dev/loop2 squashfs 1.0M 1.0M 0 100% /snap/gnome-logs/61
/dev/loop3 squashfs 4.2M 4.2M 0 100% /snap/gnome-calculator/406
/dev/loop4 squashfs 15M 15M 0 100% /snap/gnome-characters/296
/dev/loop5 squashfs 55M 55M 0 100% /snap/core18/1066
/dev/loop7 squashfs 43M 43M 0 100% /snap/gtk-common-themes/1313
/dev/loop6 squashfs 150M 150M 0 100% /snap/gnome-3-28-1804/67
/dev/loop8 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/90
/dev/sda3 ext4 32G 346M 30G 2% /home
/dev/sda4 vfat 1.3G 6.1M 1.3G 1% /boot/efi
tmpfs tmpfs 787M 20K 786M 1% /run/user/122
tmpfs tmpfs 787M 56K 786M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/loop0: 88.5 MiB, 92778496 bytes, 181208 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 3.7 MiB, 3825664 bytes, 7472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 1008 KiB, 1032192 bytes, 2016 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 4 MiB, 4218880 bytes, 8240 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 54.4 MiB, 57069568 bytes, 111464 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 149.9 MiB, 157184000 bytes, 307000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 42.8 MiB, 44879872 bytes, 87656 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 57.3 GiB, 61505273856 bytes, 120127488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 53F9AFA1-4976-4171-AA85-1050D56929FE
Device Start End Sectors Size Type
/dev/sda1 2048 40962047 40960000 19.5G Linux filesystem
/dev/sda2 40962048 49154047 8192000 3.9G Linux swap
/dev/sda3 49154048 117513422 68359375 32.6G Linux filesystem
/dev/sda4 117514240 120125439 2611200 1.3G EFI System
Disk /dev/loop8: 140.7 MiB, 147501056 bytes, 288088 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda1, using the following options: sda4/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda4/efi/.../grub*.efi !
=================== User settings
The settings chosen by the user will not act on the boot.
Comme tu as remis le paramètre du Bios "SATA Mode" sur "RST with Optane", le SSD interne de 256 Go qui équipe ton portable est invisible. On voit seulement dans ce Boot-Info la clé USB SanDisk Ultra de 64 Go (specs) sur laquelle tu as installé Ubuntu. A ma connaissance, cette clé USB devrait avoir une durée de vie réduite du fait des écritures incessantes qui seront faites par Ubuntu qui la considère comme un disque dur. Si tu utilises peu Ubuntu dans l'avenir, je suppose que c'est acceptable sinon il conviendrait de remplacer cette clé USB par un SSD externe portable. Lui il serait adapté aux écritures incessantes.
Ubuntu est bien installé dans le mode EFI et les indications de lucmars dans le post #12 étaient excellentes.
Le paramétrage du système UEFI est visible dans cet extrait :
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,0000,2001,2002,2003
Boot0000* Windows Boot Manager HD(1,GPT,db8acde9-4bc9-4dd0-a163-507b64eb36c8,0x800,0x32000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* ubuntu HD(4,GPT,7ab2a76a-2b9c-4a48-aa79-d74ed09f706f,0x7012000,0x27d800)/File(EFIubuntushimx64.efi)
Boot0003* Network Boot-IPV4: 00-0E-C6-F4-FD-98 PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)/MAC(000ec6f4fd98,1)/IPv4(0.0.0.00.0.0.0,0,0)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.
On y voit que le démarrage par défaut se fait sur Ubuntu. Quand la clé USB est branchée, il faut que tu presses la touche F12 au démarrage de l'ordi pour sélectionner "Windows Boot Manager" si tu souhaites faire une session Windows. Par contre, si tu déconnectes la clé USB avant de démarrer l'ordi, je pense que ça démarre automatiquement sur Windows. Tu confirmes ?
D'autre part, on voit que tu as fait une mise à niveau 16.04 vers 18.04. C'est la version sans HWE stack de la 18.04 : elle restera avec un noyau de la famille 4.15 à l'avenir, contrairement à une version avec HWE stack qui évolue davantage pour gérer les ordis les plus récents (marches d'escalier de ce graphique). A mon avis, tu n'as rien à changer de ce point de vue : la version sans HWE stack que tu as est bien adaptée à ton ordi.
EDIT : je viens d'ajouter ton expérience dans le ligne pour le modèle Acer Swift 3 SF314-54-59J4 de la Liste des portables « Acer ». Pour mémoire, ce modèle visible sur cette page du site LaptopSpirit est équipé d'un processeur Intel Core i5-8250U ; la partie graphique Intel UHD 620 est intégrée au processeur (il n'y a pas de carte graphique dédiée)
Dernière modification par malbo (Le 27/07/2019, à 07:23)
Hors ligne
#15 Le 27/07/2019, à 11:06
- lucmars
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
@malbo
Je pense que le succès de cette installe tient à l'invisibilité du ssd, autrement l'installateur aurait bien foutu les fichiers efi dans la partoche EFI du ssd.
Au moins ainsi, la clef est indépendante.
Gaulois Matter !
Hors ligne
#16 Le 27/07/2019, à 11:55
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
@lucmars : oui et je te félicite encore pour ta perspicacité.
Hors ligne
#17 Le 27/07/2019, à 18:18
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Bonjour à tous,
@lucmars
De mémoire pour la partition boot EFI, j'ai du au préalable créer une nouvelle partition dédiée via gparted, donc je pense pas que la présence du ssd aurait posée problème.
@malbo
Merci d'avoir rajouté le post dans la liste. Pour répondre à ta question, en effet tout se passe comme tu le décris et lorsque la clé est déconnectée le pc boot automatiquement sur windows.
Sinon, comment fag-t-on ce post comme résolu ?
P.S. Rien a voir, mais je trouve très décevant qu'on ne puisse plus chiffrer le répertoire /home dans Ubuntu 18.04...
Hors ligne
#18 Le 27/07/2019, à 18:34
- lucmars
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Pour le "résolu" tu modifies ton premier post et t'auras le titre à rectifier.
@lucmars
De mémoire pour la partition boot EFI, j'ai du au préalable créer une nouvelle partition dédiée via gparted, donc je pense pas que la présence du ssd aurait posée problème.
Tu peux penser mais en fait, c'est l'installateur qui pense à notre place. J'ai vu ici trop d'installe en externe dépendante du pc (quand le pc ne devient pas dépendant du support externe !)
Gaulois Matter !
Hors ligne
#19 Le 27/07/2019, à 18:49
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Il y a un point qui reste bizarre : pour réussir à faire ton ancienne installation (celle qu'on voit dans le post #6), il a fallu que tu parviennes à démarrer en mode non-EFI sur la LiveUSB. Or ce mode non-EFI semble ne pas exister dans ton Acer Swift 3. Pour moi, cette ancienne installation de Ubuntu dans la clé USB de 64 Go n'a pas pu être faite dans cet ordi Acer Swift 3 : je pense que tu as utilisé un autre ordi équipé d'un Bios (et non pas d'un système UEFI) pour la faire. Peux-tu confirmer ?
Dernière modification par malbo (Le 28/07/2019, à 08:28)
Hors ligne
#20 Le 28/07/2019, à 12:45
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Pour faire la première installation de xenial sur la clé sandisk, j'ai uniquement utilisé mon portable acer swift 3. J'ai activé le boot menu dans le BIOS, après j'ai mis ma clé Kinston où se trouve xenial live (clé sans table ms dos, avec boot efi), j'ai fait f12, j'ai choisi linux et j'ai lancé la version d'essai de xenial. A partir de la j'ai installé xenial sur sandisk, mais je n'ai jamais pu booter avec parce que la table de cette clé était msdos et le boot non efi. Après avoir réinstallé xenial sur la clé sandisk en mettant une table gpt et un boot efi, j'ai pu booter avec. Tu comprends?
Hors ligne
#21 Le 28/07/2019, à 13:11
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Merci pour cette réponse. Tu n'as donc utilisé que cet ordi pour faire ça, donc mon hypothèse du post #19 est fausse. Cela restera un mystère pour moi.
Hors ligne
#22 Le 28/07/2019, à 13:23
- crocefisso
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Je ne comprends pas ce que tu ne comprends pas. Petite précision, le xenial live de la clé kingston, a été généré il y a plusieurs années sur un autre pc à partir d'ubuntu.
Hors ligne
#23 Le 28/07/2019, à 13:46
- malbo
Re : Lancement Ubuntu à partir d'une clé USB [RESOLU]
Merci pour ce complément d'info. On va s'arrêter là sur ce sujet même si c'est toujours mystérieux pour moi.
Hors ligne