(Encore un) problème d'activation Bluetooth

xubu1957 · Le 03/03/2020, à 18:26

@ylag

C'est la cohésion !

Felix37 · Le 04/03/2020, à 14:32

Bonjour bonjour,

Après la réponse de xubu1957 en #22 mon bluetooth est miraculeusement reparu : alléluia ! Il s'agissait vraisemblablement d'un problème de ppa: obsolète

Pour te répondre @ylag, je n'ai aucune idée de ce qu'il s'est passé entre le bon fonctionnement du bluetooth et le problème ...

Et, pour la forme, quoique le problème ne soit plus, voilà le retour demandé :

felix@henri-UX330UAK:~$ dpkg -l | grep linux-firmware
ii  linux-firmware                             1.173.15                                         all          Firmware for Linux kernel drivers
felix@henri-UX330UAK:~$

Je vous remercie vivement pour votre aide!

xubu1957 · Le 04/03/2020, à 14:46

Bonjour,

C'est ylag qui avait relevé la présence du PPA.

Pour éditer ta discussion et rajouter [Résolu] au début du titre, il faut utiliser le bouton Modifier au bas de ton premier message.

Merci

Felix37 · Le 04/03/2020, à 15:13

Vous allez rire : sans RIEN faire, même pas un redémarrage, juste en prenant des notes en cours, le bluetooth ne fonctionne plus à nouveau .... Me voilà à nouveau à la case départ : "Pas de réseau bluetooth trouvé. Branchez la clé pour utiliser le bluetooth"

C'est le désespoir à ce stade !

Une piste potentielle à explorer :

felix@henri-UX330UAK:~$ sudo service bluetooth status
[sudo] Mot de passe de felix : 
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: active (running) since Wed 2020-03-04 13:25:35 CET; 51min ago
     Docs: man:bluetoothd(8)
 Main PID: 11138 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 4915)
   CGroup: /system.slice/bluetooth.service
           └─11138 /usr/lib/bluetooth/bluetoothd

mars 04 13:25:35 henri-UX330UAK bluetoothd[11138]: Failed to set mode: Blocked through rfkill (0x12)
mars 04 13:25:35 henri-UX330UAK bluetoothd[11138]: Endpoint registered: sender=:1.37 path=/MediaEndpoint/A2DPSource
mars 04 13:25:35 henri-UX330UAK bluetoothd[11138]: Endpoint registered: sender=:1.37 path=/MediaEndpoint/A2DPSink
mars 04 13:25:35 henri-UX330UAK bluetoothd[11138]: Failed to set mode: Blocked through rfkill (0x12)
mars 04 13:25:35 henri-UX330UAK bluetoothd[11138]: Failed to set mode: Blocked through rfkill (0x12)
mars 04 13:25:47 henri-UX330UAK bluetoothd[11138]: Failed to set mode: Failed (0x03)
mars 04 13:25:57 henri-UX330UAK bluetoothd[11138]: Failed to set mode: Failed (0x03)
mars 04 14:09:43 henri-UX330UAK bluetoothd[11138]: Failed to set mode: Failed (0x03)
mars 04 14:09:43 henri-UX330UAK bluetoothd[11138]: Endpoint unregistered: sender=:1.37 path=/MediaEndpoint/A2DPSource
mars 04 14:09:43 henri-UX330UAK bluetoothd[11138]: Endpoint unregistered: sender=:1.37 path=/MediaEndpoint/A2DPSink
felix@henri-UX330UAK:~$

Dernière modification par Felix37 (Le 04/03/2020, à 15:17)

xubu1957 · Le 04/03/2020, à 15:22

Tente :

sudo modprobe -r btusb

sudo modprobe btusb

Felix37 · Le 04/03/2020, à 15:29

Malheureusement, les deux commandes sont restées sans effet ...

Après un

sudo service bluetooth status

j'obtiens le même résultat que dans mon post précédent

J'y lis d'ailleurs « Blocked through rfkill » mais je ne comprend pas bien, car

rfkill list

ne me renvoie que ceci

felix@henri-UX330UAK:~$ rfkill list
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
felix@henri-UX330UAK:~$

Il ne détecte pas de hci0 donc il ne peut pas le bloquer, non ?

Dernière modification par Felix37 (Le 04/03/2020, à 15:32)

xubu1957 · Le 04/03/2020, à 15:32

Fournis :

dmesg | grep -i bluetooth; dmesg | grep -i firmware

Felix37 · Le 04/03/2020, à 15:35

Voilà

felix@henri-UX330UAK:~$ dmesg | grep -i bluetooth; dmesg | grep -i firmware
[ 1629.703744] Bluetooth: Core ver 2.22
[ 1629.703806] Bluetooth: HCI device and connection manager initialized
[ 1629.703814] Bluetooth: HCI socket layer initialized
[ 1629.703820] Bluetooth: L2CAP socket layer initialized
[ 1629.703834] Bluetooth: SCO socket layer initialized
[ 1629.728861] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 1629.735726] Bluetooth: hci0: Device revision is 5
[ 1629.735730] Bluetooth: hci0: Secure boot is enabled
[ 1629.735732] Bluetooth: hci0: OTP lock is enabled
[ 1629.735735] Bluetooth: hci0: API lock is enabled
[ 1629.735737] Bluetooth: hci0: Debug lock is disabled
[ 1629.735742] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 1629.756040] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 1629.876330] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1629.876334] Bluetooth: BNEP filters: protocol multicast
[ 1629.876341] Bluetooth: BNEP socket layer initialized
[ 1631.404565] Bluetooth: hci0: Waiting for firmware download to complete
[ 1631.404692] Bluetooth: hci0: Firmware loaded in 1638397 usecs
[ 1631.404785] Bluetooth: hci0: Waiting for device to boot
[ 1631.415755] Bluetooth: hci0: Device booted in 10744 usecs
[ 1631.417649] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 1631.421855] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 1631.485168] Bluetooth: RFCOMM TTY layer initialized
[ 1631.485184] Bluetooth: RFCOMM socket layer initialized
[ 1631.485194] Bluetooth: RFCOMM ver 1.11
[ 1894.933387] Bluetooth: hci0: setting interface failed (71)
[ 1896.836486] Bluetooth: hci0: command 0x200c tx timeout
[ 1898.852538] Bluetooth: hci0: command 0x2005 tx timeout
[ 1911.849464] Bluetooth: hci0: urb 0000000031e827ae failed to resubmit (113)
[ 1922.624176] Bluetooth: hci0: urb 0000000012b5dd2d failed to resubmit (113)
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.060772] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.793114] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    0.793124] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    5.416514] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[    5.464547] iwlwifi 0000:02:00.0: Direct firmware load for iwl-dbg-cfg.ini failed with error -2
[    5.483276] iwlwifi 0000:02:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
[ 1629.735742] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 1629.756040] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 1631.404565] Bluetooth: hci0: Waiting for firmware download to complete
[ 1631.404692] Bluetooth: hci0: Firmware loaded in 1638397 usecs
felix@henri-UX330UAK:~$

xubu1957 · Le 04/03/2020, à 15:38

Une réponse avec :

hcitool scan

?

Felix37 · Le 04/03/2020, à 15:39

Non plus

felix@henri-UX330UAK:~$ hcitool scan
Device is not available: No such device
felix@henri-UX330UAK:~$

xubu1957 · Le 04/03/2020, à 15:46

Vu :

 Direct firmware load for iwl-dbg-cfg.ini failed with error -2

Le mode avion n'est pas activé ?

Ton pilote 8260 me rappelle cette discussion > Mode avion ne fonctionne plus avec chipset Intel Wireless 8260

Felix37 · Le 04/03/2020, à 16:14

Le mode avion n'est pas activé, j'utilise le Wifi en parallèle !

Et le problème de ce post fait écho mais tu m'y avais déjà renvoyé plus haut dans le fil ...

Je suis allé voir ici https://askubuntu.com/questions/1201546 … it-iwlwifi (cité dans le post sur le mode avion) mais après avoir suivi les recommandations données en commentaire, aucun résultat probant encore une fois

J'essaye maintenant de me pencher sur https://doc.ubuntu-fr.org/kernel#via_autoremove pour trouver une éventuelle réponse !

Felix37 · Le 04/03/2020, à 16:19

Visiblement avec un

sudo /etc/init.d/bluetooth restart

les messages d'erreurs que j'avais précédemment avec

sudo service bluetooth status

disparaissent !

Comme vous pouvez voir ici :

felix@henri-UX330UAK:~$ sudo /etc/init.d/bluetooth restart
[ ok ] Restarting bluetooth (via systemctl): bluetooth.service.
felix@henri-UX330UAK:~$ sudo service bluetooth status
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: active (running) since Wed 2020-03-04 15:17:18 CET; 2s ago
     Docs: man:bluetoothd(8)
 Main PID: 20032 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 4915)
   CGroup: /system.slice/bluetooth.service
           └─20032 /usr/lib/bluetooth/bluetoothd

mars 04 15:17:18 henri-UX330UAK systemd[1]: Starting Bluetooth service...
mars 04 15:17:18 henri-UX330UAK bluetoothd[20032]: Bluetooth daemon 5.48
mars 04 15:17:18 henri-UX330UAK systemd[1]: Started Bluetooth service.
mars 04 15:17:18 henri-UX330UAK bluetoothd[20032]: Starting SDP server
mars 04 15:17:18 henri-UX330UAK bluetoothd[20032]: Bluetooth management interface 1.14 initialized
felix@henri-UX330UAK:~$

xubu1957 · Le 04/03/2020, à 16:19

Il faudrait avoir l'aide de Naziel, je verrais ce soir, si je l'aperçois sur le forum.

ylag · Le 04/03/2020, à 16:36

Bonjour,

En attendant le passage de Naziel, concernant l'erreur:

 Direct firmware load for iwl-dbg-cfg.ini failed with error -2

...si ça peut aider à fairte avancer les choses, je vois ceci pour un Kubuntu 19.10 où il serait conseillé de démarrer sur un noyau précédent:
Kubuntu 19.10 iwlwifi error causing system hang

A+

Dernière modification par ylag (Le 04/03/2020, à 16:37)

Felix37 · Le 04/03/2020, à 21:33

Décidément, je suis perplexe : en rentrant chez moi, rouvrant mon ordi, je constate que le Bluetooth est de nouveau fonctionnel ... Si jamais vous découvrez ce qui peut être la cause de ce genre de blague ça m'intéresse, ne serait-ce que par curiosité !

xubu1957 · Le 04/03/2020, à 21:38

Donne :

rfkill list

Felix37 · Le 04/03/2020, à 22:03

Et voilà le résultat improbable :

felix@henri-UX330UAK:~$ rfkill list
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
3: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
felix@henri-UX330UAK:~$

Nuliel · Le 04/03/2020, à 22:43

Ah, j'ai déjà eu ce type de problème sans comprendre pourquoi, avec un dell inspiron qui avait sa carte wifi qui n'apparaissait pas forcément au démarrage.
Pourrais tu fournir le dmesg complet lorsque le bluetooth ne fonctionne pas?

dmesg

(le retour est très long, mais cela permettra de comprendre pourquoi le bluetooth n'apparaît pas forcément au démarrage)

Felix37 · Le 05/03/2020, à 13:56

Je posterai le retour de dmesg si jamais le problème se reproduit ! D'ici-là, je passe le sujet en [Résolu] et vous remercie tous vivement pour votre aide !

Felix37 · Le 06/03/2020, à 15:01

Bonjour bonjour, le problème est de retour ! Voici donc le retour de

dmesg

felix@henri-UX330UAK:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xca, date = 2019-09-26
[    0.000000] Linux version 5.0.0-1040-oem-osp1 (buildd@lgw01-amd64-038) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #45-Ubuntu SMP Thu Feb 20 08:06:08 UTC 2020 (Ubuntu 5.0.0-1040.45-oem-osp1 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-1040-oem-osp1 root=UUID=f712155c-9f47-477b-b397-86d62b7df3d8 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000946a4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000946a5000-0x00000000946a5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000946a6000-0x00000000946a6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000946a7000-0x0000000099884fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099885000-0x000000009a5affff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009a5b0000-0x000000009a5f2fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009a5f3000-0x000000009adaefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009adaf000-0x000000009b1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009b200000-0x000000009b27efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009b27f000-0x000000009b2fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b2ff000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ESRT=0x9b173e58  ACPI=0x9a5bd000  ACPI 2.0=0x9a5bd000  SMBIOS=0xf05e0  SMBIOS 3.0=0xf0600  MPS=0xfc9c0 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. UX330UAK/UX330UAK, BIOS UX330UAK.302 10/06/2016
[    0.000000] tsc: Detected 2700.000 MHz processor
[    0.002005] tsc: Detected 2712.000 MHz TSC
[    0.002005] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002006] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002014] last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[    0.002019] MTRR default type: write-back
[    0.002019] MTRR fixed ranges enabled:
[    0.002021]   00000-9FFFF write-back
[    0.002021]   A0000-BFFFF uncachable
[    0.002022]   C0000-FFFFF write-protect
[    0.002023] MTRR variable ranges enabled:
[    0.002024]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.002025]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.002026]   2 base 009C000000 mask 7FFC000000 uncachable
[    0.002027]   3 base 009B800000 mask 7FFF800000 uncachable
[    0.002027]   4 disabled
[    0.002028]   5 disabled
[    0.002028]   6 disabled
[    0.002028]   7 disabled
[    0.002029]   8 disabled
[    0.002029]   9 disabled
[    0.003202] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003464] last_pfn = 0x9b2ff max_arch_pfn = 0x400000000
[    0.011700] found SMP MP-table at [mem 0x000fcbc0-0x000fcbcf]
[    0.011716] esrt: Reserving ESRT space from 0x000000009b173e58 to 0x000000009b173e90.
[    0.011723] check: Scanning 1 areas for low memory corruption
[    0.011728] Using GB pages for direct mapping
[    0.011730] BRK [0x112601000, 0x112601fff] PGTABLE
[    0.011732] BRK [0x112602000, 0x112602fff] PGTABLE
[    0.011733] BRK [0x112603000, 0x112603fff] PGTABLE
[    0.011774] BRK [0x112604000, 0x112604fff] PGTABLE
[    0.011776] BRK [0x112605000, 0x112605fff] PGTABLE
[    0.011969] BRK [0x112606000, 0x112606fff] PGTABLE
[    0.012017] BRK [0x112607000, 0x112607fff] PGTABLE
[    0.012161] BRK [0x112608000, 0x112608fff] PGTABLE
[    0.012235] BRK [0x112609000, 0x112609fff] PGTABLE
[    0.012325] RAMDISK: [mem 0x32c95000-0x35641fff]
[    0.012342] ACPI: Early table checksum verification disabled
[    0.012346] ACPI: RSDP 0x000000009A5BD000 000024 (v02 _ASUS_)
[    0.012349] ACPI: XSDT 0x000000009A5BD0B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012355] ACPI: FACP 0x000000009A5E6F88 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012360] ACPI: DSDT 0x000000009A5BD218 029D6E (v02 _ASUS_ Notebook 01072009 INTL 20160422)
[    0.012363] ACPI: FACS 0x000000009AD95C40 000040
[    0.012366] ACPI: APIC 0x000000009A5E70A0 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012368] ACPI: FPDT 0x000000009A5E7128 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012371] ACPI: ECDT 0x000000009A5E7170 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.012373] ACPI: MCFG 0x000000009A5E7238 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.012376] ACPI: FIDT 0x000000009A5E7278 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012378] ACPI: SSDT 0x000000009A5E7318 0059DE (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.012381] ACPI: MSDM 0x000000009A5ECCF8 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.012383] ACPI: SSDT 0x000000009A5ECD50 003154 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.012386] ACPI: HPET 0x000000009A5EFEA8 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.012389] ACPI: SSDT 0x000000009A5EFEE0 00090A (v02 INTEL  xh_rvp07 00000000 INTL 20160422)
[    0.012391] ACPI: UEFI 0x000000009A5F07F0 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.012394] ACPI: SSDT 0x000000009A5F0838 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.012397] ACPI: SSDT 0x000000009A5F1718 0003E3 (v02 PmRef  Cpu0Tst  00003000 INTL 20160422)
[    0.012399] ACPI: SSDT 0x000000009A5F1B00 000471 (v02 PmRef  ApTst    00003000 INTL 20160422)
[    0.012402] ACPI: LPIT 0x000000009A5F1F78 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.012404] ACPI: WSMT 0x000000009A5F2010 000028 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.012407] ACPI: SSDT 0x000000009A5F2038 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.012409] ACPI: DBGP 0x000000009A5F22D8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.012412] ACPI: DBG2 0x000000009A5F2310 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.012414] ACPI: BGRT 0x000000009A5F2368 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012417] ACPI: DMAR 0x000000009A5F23A0 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.012419] ACPI: TPM2 0x000000009A5F2490 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.012429] ACPI: Local APIC address 0xfee00000
[    0.012625] No NUMA configuration found
[    0.012626] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.012636] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
[    0.012855] Zone ranges:
[    0.012856]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012857]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012858]   Normal   [mem 0x0000000100000000-0x000000025effffff]
[    0.012859]   Device   empty
[    0.012859] Movable zone start for each node
[    0.012863] Early memory node ranges
[    0.012863]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.012864]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.012865]   node   0: [mem 0x0000000000100000-0x00000000946a4fff]
[    0.012865]   node   0: [mem 0x00000000946a7000-0x0000000099884fff]
[    0.012866]   node   0: [mem 0x000000009b27f000-0x000000009b2fefff]
[    0.012866]   node   0: [mem 0x0000000100000000-0x000000025effffff]
[    0.013294] Zeroed struct page in unavailable ranges: 26464 pages
[    0.013296] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[    0.013297] On node 0 totalpages: 2066592
[    0.013298]   DMA zone: 64 pages used for memmap
[    0.013299]   DMA zone: 26 pages reserved
[    0.013300]   DMA zone: 3997 pages, LIFO batch:0
[    0.013404]   DMA32 zone: 9765 pages used for memmap
[    0.013405]   DMA32 zone: 624899 pages, LIFO batch:63
[    0.031766]   Normal zone: 22464 pages used for memmap
[    0.031767]   Normal zone: 1437696 pages, LIFO batch:63
[    0.068228] Reserving Intel graphics memory at [mem 0x9c000000-0x9fffffff]
[    0.068503] ACPI: PM-Timer IO Port: 0x1808
[    0.068504] ACPI: Local APIC address 0xfee00000
[    0.068511] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.068512] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.068513] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.068513] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.068546] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.068548] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.068549] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.068551] ACPI: IRQ0 used by override.
[    0.068552] ACPI: IRQ9 used by override.
[    0.068554] Using ACPI (MADT) for SMP configuration information
[    0.068555] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.068565] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.068583] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.068585] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.068586] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.068588] PM: Registered nosave memory: [mem 0x946a5000-0x946a5fff]
[    0.068588] PM: Registered nosave memory: [mem 0x946a6000-0x946a6fff]
[    0.068590] PM: Registered nosave memory: [mem 0x99885000-0x9a5affff]
[    0.068590] PM: Registered nosave memory: [mem 0x9a5b0000-0x9a5f2fff]
[    0.068591] PM: Registered nosave memory: [mem 0x9a5f3000-0x9adaefff]
[    0.068591] PM: Registered nosave memory: [mem 0x9adaf000-0x9b1fffff]
[    0.068592] PM: Registered nosave memory: [mem 0x9b200000-0x9b27efff]
[    0.068593] PM: Registered nosave memory: [mem 0x9b2ff000-0x9fffffff]
[    0.068594] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.068594] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.068595] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.068595] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.068596] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.068596] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.068597] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.068597] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.068598] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.068598] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.068600] [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.068601] Booting paravirtualized kernel on bare hardware
[    0.068604] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.068616] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.068622] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.068803] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
[    0.068809] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.068810] pcpu-alloc: [0] 0 1 2 3 
[    0.068833] Built 1 zonelists, mobility grouping on.  Total pages: 2034273
[    0.068834] Policy zone: Normal
[    0.068835] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-1040-oem-osp1 root=UUID=f712155c-9f47-477b-b397-86d62b7df3d8 ro quiet splash vt.handoff=1
[    0.073587] Calgary: detecting Calgary via BIOS EBDA area
[    0.073590] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.097275] Memory: 7891300K/8266368K available (14339K kernel code, 2340K rwdata, 4408K rodata, 2592K init, 5180K bss, 375068K reserved, 0K cma-reserved)
[    0.097421] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.097426] Kernel/User page tables isolation: enabled
[    0.097442] ftrace: allocating 41757 entries in 164 pages
[    0.116498] rcu: Hierarchical RCU implementation.
[    0.116500] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.116501] 	Tasks RCU enabled.
[    0.116502] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.116502] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.119573] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.119903] vt handoff: transparent VT on vt#1
[    0.119911] Console: colour dummy device 80x25
[    0.119915] printk: console [tty0] enabled
[    0.119930] ACPI: Core revision 20181213
[    0.120346] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.120377] hpet clockevent registered
[    0.120423] APIC: Switch to symmetric I/O mode setup
[    0.120425] DMAR: Host address width 39
[    0.120426] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.120432] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.120433] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.120436] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.120437] DMAR: RMRR base: 0x00000099d40000 end: 0x00000099d5ffff
[    0.120438] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009fffffff
[    0.120440] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.120440] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.120442] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.120443] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.120443] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.122088] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.122089] x2apic enabled
[    0.122106] Switched APIC routing to cluster x2apic.
[    0.126159] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.144393] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[    0.144407] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=10848000)
[    0.144409] pid_max: default: 32768 minimum: 301
[    0.148048] LSM: Security Framework initializing
[    0.148058] Yama: becoming mindful.
[    0.148077] AppArmor: AppArmor initialized
[    0.149292] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.149894] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.149921] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.149941] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.150165] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.150166] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.150182] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.150198] process: using mwait in idle threads
[    0.150201] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.150201] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.150203] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.150205] Spectre V2 : Mitigation: Full generic retpoline
[    0.150205] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.150206] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.150212] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.150212] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.150213] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.150239] MDS: Mitigation: Clear CPU buffers
[    0.150534] Freeing SMP alternatives memory: 36K
[    0.153904] TSC deadline timer enabled
[    0.153908] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.153996] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.154004] ... version:                4
[    0.154005] ... bit width:              48
[    0.154005] ... generic registers:      4
[    0.154006] ... value mask:             0000ffffffffffff
[    0.154006] ... max period:             00007fffffffffff
[    0.154007] ... fixed-purpose events:   3
[    0.154007] ... event mask:             000000070000000f
[    0.154047] rcu: Hierarchical SRCU implementation.
[    0.154834] random: crng done (trusting CPU's manufacturer)
[    0.155116] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.155163] smp: Bringing up secondary CPUs ...
[    0.155241] x86: Booting SMP configuration:
[    0.155242] .... node  #0, CPUs:      #1 #2
[    0.156905] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.156905]  #3
[    0.156941] smp: Brought up 1 node, 4 CPUs
[    0.156941] smpboot: Max logical packages: 1
[    0.156941] smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
[    0.160699] devtmpfs: initialized
[    0.160699] x86/mm: Memory block size: 128MB
[    0.161072] PM: Registering ACPI NVS region [mem 0x946a5000-0x946a5fff] (4096 bytes)
[    0.161072] PM: Registering ACPI NVS region [mem 0x9a5f3000-0x9adaefff] (8110080 bytes)
[    0.161072] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.161072] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.161072] pinctrl core: initialized pinctrl subsystem
[    0.161072] RTC time: 00:43:49, date: 2020-03-05
[    0.161072] NET: Registered protocol family 16
[    0.161072] audit: initializing netlink subsys (disabled)
[    0.161072] audit: type=2000 audit(1583369029.040:1): state=initialized audit_enabled=0 res=1
[    0.161072] EISA bus registered
[    0.161072] cpuidle: using governor ladder
[    0.161072] cpuidle: using governor menu
[    0.161072] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.161072] ACPI: bus type PCI registered
[    0.161072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.161072] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.161072] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.161072] PCI: Using configuration type 1 for base access
[    0.161685] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.161685] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.161685] ACPI: Added _OSI(Module Device)
[    0.161685] ACPI: Added _OSI(Processor Device)
[    0.161685] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.161685] ACPI: Added _OSI(Processor Aggregator Device)
[    0.161685] ACPI: Added _OSI(Linux-Dell-Video)
[    0.161685] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.161685] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.209107] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209114] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209117] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209119] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209122] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209124] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209127] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209130] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209132] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209133] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209136] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209137] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209140] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209143] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209145] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209146] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209149] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209150] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209153] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209156] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209158] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209159] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209162] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209163] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209166] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209169] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209170] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209172] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209175] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209176] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209179] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209182] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209183] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209185] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209188] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209189] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209192] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209195] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209196] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209198] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209200] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209202] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209205] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209208] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209209] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209211] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209213] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209215] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209218] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209221] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209222] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209223] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209226] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209228] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209231] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209233] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209235] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209236] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209239] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209240] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209243] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR1._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209246] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209248] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209249] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR1._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209252] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209253] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209256] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR2._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209259] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209260] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209262] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.USR2._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209264] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209266] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209269] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209272] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209273] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209275] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209277] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209279] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209282] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209285] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209286] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209288] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209290] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209292] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209295] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209297] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209299] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209300] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209303] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209304] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209308] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209310] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209312] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209313] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209316] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209317] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209320] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209323] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209325] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209326] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209329] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209330] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209333] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209336] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209337] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.209339] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20181213/dswload2-324)
[    0.209342] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20181213/psobject-221)
[    0.209343] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.211478] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.213638] ACPI: EC: EC started
[    0.213638] ACPI: EC: interrupt blocked
[    0.216149] ACPI: \: Used as first EC
[    0.216150] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.216152] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.219246] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.225740] ACPI: Dynamic OEM Table Load:
[    0.225747] ACPI: SSDT 0xFFFF96BF952B4000 0006B4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.226460] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.228383] ACPI: Dynamic OEM Table Load:
[    0.228388] ACPI: SSDT 0xFFFF96BF94DB6C00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.228994] ACPI: Dynamic OEM Table Load:
[    0.228999] ACPI: SSDT 0xFFFF96BF94D74E00 000115 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.229436] ACPI: Dynamic OEM Table Load:
[    0.229440] ACPI: SSDT 0xFFFF96BF94D74200 0001A4 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.230299] ACPI: Dynamic OEM Table Load:
[    0.230305] ACPI: SSDT 0xFFFF96BF952B5800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.231258] ACPI: Dynamic OEM Table Load:
[    0.231263] ACPI: SSDT 0xFFFF96BF94D74400 000197 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.231821] ACPI: Dynamic OEM Table Load:
[    0.231825] ACPI: SSDT 0xFFFF96BF94D75400 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.234476] ACPI: Interpreter enabled
[    0.234521] ACPI: (supports S0 S3 S4 S5)
[    0.234522] ACPI: Using IOAPIC for interrupt routing
[    0.234567] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.236023] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.241348] ACPI: Power Resource [WRST] (on)
[    0.241556] ACPI: Power Resource [WRST] (on)
[    0.241760] ACPI: Power Resource [WRST] (on)
[    0.241961] ACPI: Power Resource [WRST] (on)
[    0.242163] ACPI: Power Resource [WRST] (on)
[    0.242372] ACPI: Power Resource [WRST] (on)
[    0.242574] ACPI: Power Resource [WRST] (on)
[    0.242778] ACPI: Power Resource [WRST] (on)
[    0.242981] ACPI: Power Resource [WRST] (on)
[    0.243181] ACPI: Power Resource [WRST] (on)
[    0.243383] ACPI: Power Resource [WRST] (on)
[    0.244185] ACPI: Power Resource [WRST] (on)
[    0.244388] ACPI: Power Resource [WRST] (on)
[    0.244594] ACPI: Power Resource [WRST] (on)
[    0.244801] ACPI: Power Resource [WRST] (on)
[    0.245002] ACPI: Power Resource [WRST] (on)
[    0.245202] ACPI: Power Resource [WRST] (on)
[    0.245678] ACPI: Power Resource [WRST] (on)
[    0.245880] ACPI: Power Resource [WRST] (on)
[    0.246082] ACPI: Power Resource [WRST] (on)
[    0.263153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.263160] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.265330] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.265331] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.266425] PCI host bridge to bus 0000:00
[    0.266427] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.266429] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.266430] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.266431] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window]
[    0.266432] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.266433] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.266454] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.266895] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.266907] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
[    0.266914] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.266918] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.266935] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.267113] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.267127] pci 0000:00:04.0: reg 0x10: [mem 0xef120000-0xef127fff 64bit]
[    0.267396] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.267420] pci 0000:00:14.0: reg 0x10: [mem 0xef110000-0xef11ffff 64bit]
[    0.267500] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.267791] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.267815] pci 0000:00:14.2: reg 0x10: [mem 0xef138000-0xef138fff 64bit]
[    0.268122] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.268386] pci 0000:00:15.0: reg 0x10: [mem 0xef137000-0xef137fff 64bit]
[    0.269486] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.269750] pci 0000:00:15.1: reg 0x10: [mem 0xef136000-0xef136fff 64bit]
[    0.270798] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.270842] pci 0000:00:16.0: reg 0x10: [mem 0xef135000-0xef135fff 64bit]
[    0.270971] pci 0000:00:16.0: PME# supported from D3hot
[    0.271186] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.271206] pci 0000:00:17.0: reg 0x10: [mem 0xef130000-0xef131fff]
[    0.271214] pci 0000:00:17.0: reg 0x14: [mem 0xef134000-0xef1340ff]
[    0.271222] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.271230] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.271238] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.271246] pci 0000:00:17.0: reg 0x24: [mem 0xef133000-0xef1337ff]
[    0.271296] pci 0000:00:17.0: PME# supported from D3hot
[    0.271500] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.271592] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.271837] pci 0000:00:1c.6: [8086:9d16] type 01 class 0x060400
[    0.271931] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.272180] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[    0.272482] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.272498] pci 0000:00:1f.2: reg 0x10: [mem 0xef12c000-0xef12ffff]
[    0.272724] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.272752] pci 0000:00:1f.3: reg 0x10: [mem 0xef128000-0xef12bfff 64bit]
[    0.272780] pci 0000:00:1f.3: reg 0x20: [mem 0xef100000-0xef10ffff 64bit]
[    0.272835] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.273105] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.273166] pci 0000:00:1f.4: reg 0x10: [mem 0xef132000-0xef1320ff 64bit]
[    0.273237] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.273563] acpiphp: Slot [1] registered
[    0.273575] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.274011] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[    0.274108] pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit]
[    0.274690] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.275453] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.275457] pci 0000:00:1c.6:   bridge window [mem 0xef000000-0xef0fffff]
[    0.278628] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.278712] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.278794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.278875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.278956] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.279037] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.279118] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.279199] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.279885] ACPI: EC: interrupt unblocked
[    0.279885] ACPI: EC: event unblocked
[    0.279885] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.279885] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.279888] SCSI subsystem initialized
[    0.279888] libata version 3.00 loaded.
[    0.280407] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.280407] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.280407] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.280407] vgaarb: loaded
[    0.280423] ACPI: bus type USB registered
[    0.280437] usbcore: registered new interface driver usbfs
[    0.280443] usbcore: registered new interface driver hub
[    0.280458] usbcore: registered new device driver usb
[    0.280489] pps_core: LinuxPPS API ver. 1 registered
[    0.280490] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.280493] PTP clock support registered
[    0.280508] EDAC MC: Ver: 3.0.0
[    0.280839] Registered efivars operations
[    0.280839] PCI: Using ACPI for IRQ routing
[    0.295276] PCI: pci_cache_line_size set to 64 bytes
[    0.295978] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.295979] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.295980] e820: reserve RAM buffer [mem 0x946a5000-0x97ffffff]
[    0.295980] e820: reserve RAM buffer [mem 0x99885000-0x9bffffff]
[    0.295981] e820: reserve RAM buffer [mem 0x9b2ff000-0x9bffffff]
[    0.295982] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.296072] NetLabel: Initializing
[    0.296072] NetLabel:  domain hash size = 128
[    0.296073] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.296085] NetLabel:  unlabeled traffic allowed by default
[    0.296851] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.296854] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.298903] clocksource: Switched to clocksource tsc-early
[    0.307740] VFS: Disk quotas dquot_6.6.0
[    0.307754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.307870] AppArmor: AppArmor Filesystem Enabled
[    0.307905] pnp: PnP ACPI init
[    0.308273] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.308275] system 00:00: [io  0xffff] has been reserved
[    0.308276] system 00:00: [io  0xffff] has been reserved
[    0.308277] system 00:00: [io  0xffff] has been reserved
[    0.308278] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.308279] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.308284] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.308406] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.308449] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.308453] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.308667] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.308967] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.308968] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.308969] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.308971] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.308973] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.308975] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.308976] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.308977] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.308979] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.308980] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
[    0.308983] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.309028] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.309029] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.309031] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.309032] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.309033] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.309034] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.309035] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.309038] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.309406] system 00:06: [io  0xff00-0xfffe] has been reserved
[    0.309409] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.310986] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.310988] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.310989] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.310990] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.310991] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.310994] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.312433] pnp: PnP ACPI: found 8 devices
[    0.318172] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.318199] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.318215] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.318219] pci 0000:00:1c.6:   bridge window [mem 0xef000000-0xef0fffff]
[    0.318226] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.318227] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.318228] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.318229] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xefffffff window]
[    0.318230] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.318232] pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff]
[    0.318434] NET: Registered protocol family 2
[    0.318591] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.318617] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.318721] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.318858] TCP: Hash tables configured (established 65536 bind 65536)
[    0.318894] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.318916] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.318988] NET: Registered protocol family 1
[    0.318993] NET: Registered protocol family 44
[    0.319005] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.319676] PCI: CLS 0 bytes, default 64
[    0.319707] Unpacking initramfs...
[    0.955879] Freeing initrd memory: 42676K
[    0.955941] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.0
[    0.955944] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.1
[    0.968464] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.968471] software IO TLB: mapped [mem 0x8f47c000-0x9347c000] (64MB)
[    0.968703] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[    0.968715] clocksource: Switched to clocksource tsc
[    0.968779] check: Scanning for low memory corruption every 60 seconds
[    0.970467] Initialise system trusted keyrings
[    0.970476] Key type blacklist registered
[    0.970507] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.971748] zbud: loaded
[    0.972163] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.972350] fuse init (API version 7.28)
[    1.008205] Key type asymmetric registered
[    1.008206] Asymmetric key parser 'x509' registered
[    1.008225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.008262] io scheduler mq-deadline registered
[    1.008715] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    1.008980] pcieport 0000:00:1c.6: Signaling PME with IRQ 123
[    1.009042] aer 0000:00:1c.6:pcie002: AER enabled with IRQ 123
[    1.009121] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.009191] efifb: probing for efifb
[    1.009207] efifb: framebuffer at 0xd0000000, using 1920k, total 1920k
[    1.009208] efifb: mode is 800x600x32, linelength=3200, pages=1
[    1.009208] efifb: scrolling: redraw
[    1.009209] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.009302] Console: switching to colour frame buffer device 100x37
[    1.009318] fb0: EFI VGA frame buffer device
[    1.009325] intel_idle: MWAIT substates: 0x11142120
[    1.009326] intel_idle: v0.4.1 model 0x8E
[    1.009538] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.009747] ACPI: AC Adapter [AC0] (off-line)
[    1.009821] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:01/PNP0C0D:00/input/input0
[    1.009827] ACPI: Lid Switch [LID]
[    1.009874] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.009880] ACPI: Sleep Button [SLPB]
[    1.009904] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.009909] ACPI: Power Button [PWRB]
[    1.009933] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.009943] ACPI: Power Button [PWRF]
[    1.013724] thermal LNXTHERM:00: registered as thermal_zone0
[    1.013725] ACPI: Thermal Zone [THRM] (41 C)
[    1.013877] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.016269] Linux agpgart interface v0.103
[    1.021319] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    1.021331] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[    1.022987] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.043272] loop: module loaded
[    1.043475] libphy: Fixed MDIO Bus: probed
[    1.043476] tun: Universal TUN/TAP device driver, 1.6
[    1.043539] PPP generic driver version 2.4.2
[    1.043602] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.043605] ehci-pci: EHCI PCI platform driver
[    1.043618] ehci-platform: EHCI generic platform driver
[    1.043630] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.043632] ohci-pci: OHCI PCI platform driver
[    1.043638] ohci-platform: OHCI generic platform driver
[    1.043645] uhci_hcd: USB Universal Host Controller Interface driver
[    1.043885] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.043895] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.044980] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    1.044985] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.045185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.045187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.045188] usb usb1: Product: xHCI Host Controller
[    1.045189] usb usb1: Manufacturer: Linux 5.0.0-1040-oem-osp1 xhci-hcd
[    1.045190] usb usb1: SerialNumber: 0000:00:14.0
[    1.045314] hub 1-0:1.0: USB hub found
[    1.045334] hub 1-0:1.0: 12 ports detected
[    1.046315] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.046319] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.046321] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.046357] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    1.046358] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.046359] usb usb2: Product: xHCI Host Controller
[    1.046360] usb usb2: Manufacturer: Linux 5.0.0-1040-oem-osp1 xhci-hcd
[    1.046361] usb usb2: SerialNumber: 0000:00:14.0
[    1.046473] hub 2-0:1.0: USB hub found
[    1.046489] hub 2-0:1.0: 6 ports detected
[    1.046766] usb: port power management may be unreliable
[    1.047225] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[    1.047225] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.048377] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.048536] mousedev: PS/2 mouse device common for all mice
[    1.048928] rtc_cmos 00:01: RTC can wake from S4
[    1.049376] rtc_cmos 00:01: registered as rtc0
[    1.049390] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.049396] i2c /dev entries driver
[    1.049493] device-mapper: uevent: version 1.0.3
[    1.049539] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.049557] platform eisa.0: Probing EISA bus 0
[    1.049559] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.049560] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.049561] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.049562] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.049562] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.049563] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.049564] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.049565] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.049566] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.049567] platform eisa.0: EISA: Detected 0 cards
[    1.049570] intel_pstate: Intel P-state driver initializing
[    1.049815] intel_pstate: HWP enabled
[    1.049840] ledtrig-cpu: registered to indicate activity on CPUs
[    1.049842] EFI Variables Facility v0.08 2004-May-17
[    1.072746] intel_pmc_core intel_pmc_core.0:  initialized
[    1.072918] NET: Registered protocol family 10
[    1.077257] Segment Routing with IPv6
[    1.077276] NET: Registered protocol family 17
[    1.077302] Key type dns_resolver registered
[    1.077482] mce: Using 8 MCE banks
[    1.077493] RAS: Correctable Errors collector initialized.
[    1.077524] microcode: sig=0x806e9, pf=0x80, revision=0xca
[    1.077553] microcode: Microcode Update Driver: v2.2.
[    1.077568] sched_clock: Marking stable (1077040602, 510415)->(1082946830, -5395813)
[    1.077700] registered taskstats version 1
[    1.077707] Loading compiled-in X.509 certificates
[    1.078960] Loaded X.509 cert 'Build time autogenerated kernel key: bd901cf2e3960969589ba8cb4363092eb5d2cb39'
[    1.080919] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[    1.081086] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[    1.081102] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    1.081115] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    1.081279] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    1.081673] Couldn't get size: 0x800000000000000e
[    1.081675] MODSIGN: Couldn't get UEFI MokListRT
[    1.082562] zswap: loaded using pool lzo/zbud
[    1.087343] Key type big_key registered
[    1.087346] Key type trusted registered
[    1.088570] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.089390] Key type encrypted registered
[    1.089393] AppArmor: AppArmor sha1 policy hashing enabled
[    1.092071] ima: Allocated hash algorithm: sha1
[    1.144415] No architecture policies found
[    1.144431] evm: Initialising EVM extended attributes:
[    1.144432] evm: security.selinux
[    1.144432] evm: security.SMACK64
[    1.144433] evm: security.SMACK64EXEC
[    1.144433] evm: security.SMACK64TRANSMUTE
[    1.144433] evm: security.SMACK64MMAP
[    1.144434] evm: security.apparmor
[    1.144434] evm: security.ima
[    1.144435] evm: security.capability
[    1.144435] evm: HMAC attrs: 0x1
[    1.145432]   Magic number: 12:37:708
[    1.145667] rtc_cmos 00:01: setting system clock to 2020-03-05T00:43:50 UTC (1583369030)
[    1.146677] Freeing unused decrypted memory: 2040K
[    1.147060] Freeing unused kernel image memory: 2592K
[    1.161052] Write protecting the kernel read-only data: 22528k
[    1.161568] Freeing unused kernel image memory: 2016K
[    1.161839] Freeing unused kernel image memory: 1736K
[    1.169225] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.169226] x86/mm: Checking user space page tables
[    1.176421] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.176423] Run /init as init process
[    1.263968] hidraw: raw HID events driver (C) Jiri Kosina
[    1.269614] ahci 0000:00:17.0: version 3.0
[    1.269886] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.269889] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.276465] scsi host0: ahci
[    1.276585] ata1: SATA max UDMA/133 abar m2048@0xef133000 port 0xef133100 irq 125
[    1.380449] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[    1.564679] usb 1-5: New USB device found, idVendor=0bda, idProduct=58d1, bcdDevice= 0.01
[    1.564680] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.564681] usb 1-5: Product: USB2.0 HD UVC WebCam
[    1.564682] usb 1-5: Manufacturer: 04081-0009610016431011523
[    1.564683] usb 1-5: SerialNumber: 200901010001
[    1.593162] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.595558] ata1.00: ATA-10: Micron_1100_MTFDDAV512TBN,  M0MA020, max UDMA/133
[    1.595560] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.599961] ata1.00: configured for UDMA/133
[    1.611152] scsi 0:0:0:0: Direct-Access     ATA      Micron_1100_MTFD A020 PQ: 0 ANSI: 5
[    1.611356] ata1.00: Enabling discard_zeroes_data
[    1.611412] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.611444] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    1.611462] sd 0:0:0:0: [sda] Write Protect is off
[    1.611464] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.611546] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.611744] ata1.00: Enabling discard_zeroes_data
[    1.613847]  sda: sda1 sda2
[    1.614063] ata1.00: Enabling discard_zeroes_data
[    1.614149] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.697126] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[    1.847959] usb 1-8: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[    1.847961] usb 1-8: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[    1.847964] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[    1.847965] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.977126] usb 1-9: new full-speed USB device number 4 using xhci_hcd
[    2.129904] usb 1-9: New USB device found, idVendor=04f3, idProduct=0903, bcdDevice= 1.35
[    2.129906] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.129907] usb 1-9: Product: ELAN:Fingerprint
[    2.129908] usb 1-9: Manufacturer: ELAN
[    2.185920] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.383538] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.401238] systemd[1]: Detected architecture x86-64.
[    2.404028] systemd[1]: Set hostname to <henri-UX330UAK>.
[    2.536034] systemd[1]: Created slice User and Session Slice.
[    2.536249] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.536262] systemd[1]: Reached target User and Group Name Lookups.
[    2.536359] systemd[1]: Created slice System Slice.
[    2.536446] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.536501] systemd[1]: Listening on Journal Socket.
[    2.537032] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.548771] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    2.617745] lp: driver loaded but no devices found
[    2.634210] ppdev: user-space parallel port driver
[    2.646441] systemd-journald[324]: Received request to flush runtime journal from PID 1
[    2.696483] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    2.855512] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
[    2.974070] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    2.977572] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.990351] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    2.990984] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    3.023291] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.023655] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.023929] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.036009] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    3.038388] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.044740] i2c_hid i2c-ELAN1300:00: i2c-ELAN1300:00 supply vdd not found, using dummy regulator
[    3.044756] i2c_hid i2c-ELAN1300:00: Linked as a consumer to regulator.0
[    3.044757] i2c_hid i2c-ELAN1300:00: i2c-ELAN1300:00 supply vddl not found, using dummy regulator
[    3.056383] asus_wmi: ASUS WMI generic driver loaded
[    3.061505] asus_nb_wmi: Identified laptop model 'ASUSTeK COMPUTER INC. UX330UAK'
[    3.061605] asus_wmi: Initialization: 0x1
[    3.061685] asus_wmi: BIOS WMI version: 9.0
[    3.061754] asus_wmi: SFUN value: 0x2021
[    3.062759] Intel(R) Wireless WiFi driver for Linux
[    3.062760] Copyright(c) 2003- 2015 Intel Corporation
[    3.063185] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    3.068972] ACPI BIOS Error (bug): Could not resolve [\_SB.ATKD.WMNB.GALS], AE_NOT_FOUND (20181213/psargs-330)
[    3.068985] 
               Initialized Local Variables for Method [WMNB]:
[    3.068986]   Local0: 000000009b97b594 <Obj>           Integer 0000000053545344
[    3.068992] Initialized Arguments for Method [WMNB]:  (3 arguments defined for method invocation)
[    3.068993]   Arg0:   00000000611c5153 <Obj>           Integer 0000000000000000
[    3.068995]   Arg1:   00000000c3840c20 <Obj>           Integer 0000000053545344
[    3.068998]   Arg2:   00000000c001b6e6 <Obj>           Buffer(12) 01 00 05 00 00 00 00 00
[    3.069008] ACPI Error: Method parse/execution failed \_SB.ATKD.WMNB, AE_NOT_FOUND (20181213/psparse-531)
[    3.069076] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
[    3.069152] VFIO - User Level meta-driver version: 0.3
[    3.069923] asus_wmi: Number of fans: 0
[    3.089555] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.089557] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.089557] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.089558] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.089558] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.089559] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.093554] cryptd: max_cpu_qlen set to 1000
[    3.109409] AVX2 version of gcm_enc/dec engaged.
[    3.109411] AES CTR mode by8 optimization enabled
[    3.112656] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[    3.112659] iwlwifi 0000:02:00.0: Found debug configuration: 0
[    3.113528] iwlwifi 0000:02:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm
[    3.172365] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[    3.172366] fb0: switching to inteldrmfb from EFI VGA
[    3.172391] Console: switching to colour dummy device 80x25
[    3.172521] [drm] Replacing VGA console driver
[    3.173027] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[    3.173861] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.173862] [drm] Driver supports precise vblank timestamp query.
[    3.174786] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.181657] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    3.181913] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    3.186454] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.214639] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[    3.217745] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.218008] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.224985] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.225174] snd_hda_intel 0000:00:1f.3: Linked as a consumer to 0000:00:02.0
[    3.226716] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.227129] fbcon: inteldrmfb (fb0) is primary device
[    3.227201] Console: switching to colour frame buffer device 240x67
[    3.227248] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.263462] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.263465] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.263466] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.263466] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.263467] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.263468] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    3.269420] iwlwifi 0000:02:00.0: base HW address: 34:f3:9a:a4:4f:61
[    3.313224] intel_rapl: Found RAPL domain package
[    3.313227] intel_rapl: Found RAPL domain core
[    3.313228] intel_rapl: Found RAPL domain uncore
[    3.313229] intel_rapl: Found RAPL domain dram
[    3.341577] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    3.341718] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    3.341823] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    3.342007] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.342123] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.342469] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.355931] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.356342] thermal thermal_zone9: failed to read out thermal zone (-61)
[    3.447216] input: ELAN1300:00 04F3:3028 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1300:00/0018:04F3:3028.0001/input/input14
[    3.453122] input: ELAN1300:00 04F3:3028 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1300:00/0018:04F3:3028.0001/input/input15
[    3.454015] hid-generic 0018:04F3:3028.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3028] on i2c-ELAN1300:00
[    3.537463] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.583939] input: ELAN1300:00 04F3:3028 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1300:00/0018:04F3:3028.0001/input/input17
[    3.584033] hid-multitouch 0018:04F3:3028.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3028] on i2c-ELAN1300:00
[    4.119038] Bluetooth: Core ver 2.22
[    4.119055] NET: Registered protocol family 31
[    4.119056] Bluetooth: HCI device and connection manager initialized
[    4.119060] Bluetooth: HCI socket layer initialized
[    4.119062] Bluetooth: L2CAP socket layer initialized
[    4.119064] Bluetooth: SCO socket layer initialized
[    4.124217] media: Linux media interface: v0.10
[    4.130647] videodev: Linux video capture interface: v2.00
[    4.265199] usbcore: registered new interface driver btusb
[    4.265776] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018
[    4.274196] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (0bda:58d1)
[    4.280800] uvcvideo 1-5:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[    4.280801] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    4.280803] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    4.280804] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    4.280869] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18
[    4.280940] usbcore: registered new interface driver uvcvideo
[    4.280941] USB Video Class driver (1.1.1)
[    4.876742] audit: type=1400 audit(1583369034.227:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=869 comm="apparmor_parser"
[    4.879596] audit: type=1400 audit(1583369034.227:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=872 comm="apparmor_parser"
[    4.879599] audit: type=1400 audit(1583369034.227:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=872 comm="apparmor_parser"
[    4.879601] audit: type=1400 audit(1583369034.227:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=872 comm="apparmor_parser"
[    4.881574] audit: type=1400 audit(1583369034.231:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=868 comm="apparmor_parser"
[    4.881576] audit: type=1400 audit(1583369034.231:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=868 comm="apparmor_parser"
[    4.881578] audit: type=1400 audit(1583369034.231:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=868 comm="apparmor_parser"
[    4.881580] audit: type=1400 audit(1583369034.231:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=868 comm="apparmor_parser"
[    4.902365] audit: type=1400 audit(1583369034.251:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=873 comm="apparmor_parser"
[    5.148308] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.148309] Bluetooth: BNEP filters: protocol multicast
[    5.148313] Bluetooth: BNEP socket layer initialized
[    6.652632] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    6.799782] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[    6.880222] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[    7.139788] kauditd_printk_skb: 35 callbacks suppressed
[    7.139789] audit: type=1400 audit(1583369036.487:46): apparmor="DENIED" operation="open" profile="system_tor" name="/etc/ssl/openssl.cnf" pid=1113 comm="tor" requested_mask="r" denied_mask="r" fsuid=122 ouid=0
[    9.788128] Bluetooth: RFCOMM TTY layer initialized
[    9.788136] Bluetooth: RFCOMM socket layer initialized
[    9.788139] Bluetooth: RFCOMM ver 1.11
[   10.544298] PKCS#7 signature not signed with a trusted key
[   10.544303] vboxdrv: loading out-of-tree module taints kernel.
[   10.544461] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   10.553134] vboxdrv: Found 4 processor cores
[   10.572733] vboxdrv: TSC mode is Invariant, tentative frequency 2711987770 Hz
[   10.572734] vboxdrv: Successfully loaded version 5.2.34_Ubuntu (interface 0x00290001)
[   10.581659] PKCS#7 signature not signed with a trusted key
[   10.582257] VBoxNetFlt: Successfully started.
[   10.588287] PKCS#7 signature not signed with a trusted key
[   10.588635] VBoxNetAdp: Successfully started.
[   10.594495] PKCS#7 signature not signed with a trusted key
[   10.594805] VBoxPciLinuxInit
[   10.596979] vboxpci: IOMMU not found (not registered)
[   12.172322] rfkill: input handler disabled
[  198.166927] input: 00:0D:44:AE:AE:B0 as /devices/virtual/input/input19
[ 1013.340313] PM: suspend entry (deep)
[ 1013.340316] PM: Syncing filesystems ... done.
[ 1013.390672] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 1013.394460] OOM killer disabled.
[ 1013.394462] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1013.396022] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1013.412766] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1013.413545] sd 0:0:0:0: [sda] Stopping disk
[ 1013.594333] ACPI: EC: interrupt blocked
[ 1013.641418] ACPI: Preparing to enter system sleep state S3
[ 1013.644891] ACPI: EC: event blocked
[ 1013.644893] ACPI: EC: EC stopped
[ 1013.644894] PM: Saving platform NVS memory
[ 1013.645049] Disabling non-boot CPUs ...
[ 1013.645850] IRQ 125: no longer affine to CPU1
[ 1013.646909] smpboot: CPU 1 is now offline
[ 1013.648764] IRQ 128: no longer affine to CPU2
[ 1013.650612] smpboot: CPU 2 is now offline
[ 1013.651926] IRQ 122: no longer affine to CPU3
[ 1013.651935] IRQ 124: no longer affine to CPU3
[ 1013.651947] IRQ 127: no longer affine to CPU3
[ 1013.653004] smpboot: CPU 3 is now offline
[ 1013.656592] ACPI: Low-level resume complete
[ 1013.656692] ACPI: EC: EC started
[ 1013.656692] PM: Restoring platform NVS memory
[ 1013.659113] Enabling non-boot CPUs ...
[ 1013.659164] x86: Booting SMP configuration:
[ 1013.659165] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1013.661124] microcode: sig=0x806e9, pf=0x80, revision=0x38
[ 1013.662789] microcode: updated to revision 0xca, date = 2019-09-26
[ 1013.662925]  cache: parent cpu1 should not be sleeping
[ 1013.663174] CPU1 is up
[ 1013.663201] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1013.663531] microcode: sig=0x806e9, pf=0x80, revision=0xca
[ 1013.663657]  cache: parent cpu2 should not be sleeping
[ 1013.664056] CPU2 is up
[ 1013.664107] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1013.664541]  cache: parent cpu3 should not be sleeping
[ 1013.664785] CPU3 is up
[ 1013.668288] ACPI: Waking up from system sleep state S3
[ 1013.682318] ACPI: EC: interrupt unblocked
[ 1013.722626] ACPI: EC: event unblocked
[ 1013.722919] usb usb1: root hub lost power or was reset
[ 1013.722924] usb usb2: root hub lost power or was reset
[ 1013.724296] ACPI: button: The lid device is not compliant to SW_LID.
[ 1013.725434] sd 0:0:0:0: [sda] Starting disk
[ 1014.040020] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1014.045827] ata1.00: configured for UDMA/133
[ 1014.056184] ata1.00: Enabling discard_zeroes_data
[ 1014.080471] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[ 1014.356424] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[ 1014.632492] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 1014.786144] acpi LNXPOWER:13: Turning OFF
[ 1014.786216] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 1014.787026] acpi LNXPOWER:12: Turning OFF
[ 1014.787260] acpi LNXPOWER:11: Turning OFF
[ 1014.787479] acpi LNXPOWER:10: Turning OFF
[ 1014.787693] acpi LNXPOWER:0f: Turning OFF
[ 1014.787905] acpi LNXPOWER:0e: Turning OFF
[ 1014.788117] acpi LNXPOWER:0d: Turning OFF
[ 1014.788393] acpi LNXPOWER:0c: Turning OFF
[ 1014.788606] acpi LNXPOWER:0b: Turning OFF
[ 1014.788820] acpi LNXPOWER:0a: Turning OFF
[ 1014.789033] acpi LNXPOWER:09: Turning OFF
[ 1014.789245] acpi LNXPOWER:08: Turning OFF
[ 1014.789457] acpi LNXPOWER:07: Turning OFF
[ 1014.789671] acpi LNXPOWER:06: Turning OFF
[ 1014.789885] acpi LNXPOWER:05: Turning OFF
[ 1014.790097] acpi LNXPOWER:04: Turning OFF
[ 1014.790185] acpi LNXPOWER:03: Turning OFF
[ 1014.790246] acpi LNXPOWER:02: Turning OFF
[ 1014.790307] acpi LNXPOWER:01: Turning OFF
[ 1014.790368] acpi LNXPOWER:00: Turning OFF
[ 1014.790409] OOM killer enabled.
[ 1014.790409] Restarting tasks ... 
[ 1014.793249] Bluetooth: hci0: Device revision is 5
[ 1014.793252] Bluetooth: hci0: Secure boot is enabled
[ 1014.793252] Bluetooth: hci0: OTP lock is enabled
[ 1014.793253] Bluetooth: hci0: API lock is enabled
[ 1014.793253] Bluetooth: hci0: Debug lock is disabled
[ 1014.793255] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 1014.799311] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 1014.800224] done.
[ 1014.801822] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 1014.819768] PM: suspend exit
[ 1014.916497] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[ 1015.063987] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[ 1015.145244] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[ 1016.461081] Bluetooth: hci0: Waiting for firmware download to complete
[ 1016.461206] Bluetooth: hci0: Firmware loaded in 1636518 usecs
[ 1016.461246] Bluetooth: hci0: Waiting for device to boot
[ 1016.472366] Bluetooth: hci0: Device booted in 10870 usecs
[ 1016.474242] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 1016.478403] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 1030.804283] usb 1-2: new low-speed USB device number 5 using xhci_hcd
[ 1030.956931] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[ 1030.956936] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1030.956940] usb 1-2: Product: Usb Mouse
[ 1030.956943] usb 1-2: Manufacturer: SIGMACHIP
[ 1031.545661] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1C4F:0034.0002/input/input20
[ 1031.604691] hid-generic 0003:1C4F:0034.0002: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-2/input0
[ 1031.604809] usbcore: registered new interface driver usbhid
[ 1031.604811] usbhid: USB HID core driver
[ 1171.795849] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 1171.805351] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 1171.821735] wlp2s0: authenticated
[ 1171.824355] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 1171.840297] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 1171.842587] wlp2s0: associated
[ 1171.904821] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1171.911096] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 2208.125888] wlp2s0: deauthenticating from 6e:c7:ec:55:53:ba by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2211.838326] PM: suspend entry (deep)
[ 2211.838329] PM: Syncing filesystems ... done.
[ 2211.844620] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2211.847549] OOM killer disabled.
[ 2211.847550] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2211.849005] printk: Suspending console(s) (use no_console_suspend to debug)
[ 2211.872138] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2211.872938] sd 0:0:0:0: [sda] Stopping disk
[ 2211.949456] ACPI: EC: interrupt blocked
[ 2211.996939] ACPI: Preparing to enter system sleep state S3
[ 2212.000405] ACPI: EC: event blocked
[ 2212.000407] ACPI: EC: EC stopped
[ 2212.000408] PM: Saving platform NVS memory
[ 2212.000557] Disabling non-boot CPUs ...
[ 2212.001364] IRQ 125: no longer affine to CPU1
[ 2212.003185] smpboot: CPU 1 is now offline
[ 2212.004889] IRQ 128: no longer affine to CPU2
[ 2212.006716] smpboot: CPU 2 is now offline
[ 2212.007967] IRQ 122: no longer affine to CPU3
[ 2212.007977] IRQ 124: no longer affine to CPU3
[ 2212.007989] IRQ 127: no longer affine to CPU3
[ 2212.009022] smpboot: CPU 3 is now offline
[ 2212.012731] ACPI: Low-level resume complete
[ 2212.012831] ACPI: EC: EC started
[ 2212.012831] PM: Restoring platform NVS memory
[ 2212.015237] Enabling non-boot CPUs ...
[ 2212.015305] x86: Booting SMP configuration:
[ 2212.015306] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2212.015662] microcode: sig=0x806e9, pf=0x80, revision=0x38
[ 2212.017459]  cache: parent cpu1 should not be sleeping
[ 2212.017707] CPU1 is up
[ 2212.017752] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 2212.018079] microcode: sig=0x806e9, pf=0x80, revision=0xca
[ 2212.018208]  cache: parent cpu2 should not be sleeping
[ 2212.018607] CPU2 is up
[ 2212.018650] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2212.019084]  cache: parent cpu3 should not be sleeping
[ 2212.019317] CPU3 is up
[ 2212.022841] ACPI: Waking up from system sleep state S3
[ 2212.037112] ACPI: EC: interrupt unblocked
[ 2212.077936] ACPI: EC: event unblocked
[ 2212.078221] usb usb1: root hub lost power or was reset
[ 2212.078225] usb usb2: root hub lost power or was reset
[ 2212.081078] sd 0:0:0:0: [sda] Starting disk
[ 2212.395451] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2212.400857] ata1.00: configured for UDMA/133
[ 2212.411151] ata1.00: Enabling discard_zeroes_data
[ 2212.435832] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[ 2212.711827] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 2212.987784] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[ 2213.611705] usb 1-2: reset low-speed USB device number 5 using xhci_hcd
[ 2213.910250] acpi LNXPOWER:13: Turning OFF
[ 2213.910506] acpi LNXPOWER:12: Turning OFF
[ 2213.910749] acpi LNXPOWER:11: Turning OFF
[ 2213.910993] acpi LNXPOWER:10: Turning OFF
[ 2213.911234] acpi LNXPOWER:0f: Turning OFF
[ 2213.911553] acpi LNXPOWER:0e: Turning OFF
[ 2213.911808] acpi LNXPOWER:0d: Turning OFF
[ 2213.912052] acpi LNXPOWER:0c: Turning OFF
[ 2213.912291] acpi LNXPOWER:0b: Turning OFF
[ 2213.912532] acpi LNXPOWER:0a: Turning OFF
[ 2213.912773] acpi LNXPOWER:09: Turning OFF
[ 2213.913013] acpi LNXPOWER:08: Turning OFF
[ 2213.913252] acpi LNXPOWER:07: Turning OFF
[ 2213.913494] acpi LNXPOWER:06: Turning OFF
[ 2213.913618] acpi LNXPOWER:05: Turning OFF
[ 2213.913679] acpi LNXPOWER:04: Turning OFF
[ 2213.913741] acpi LNXPOWER:03: Turning OFF
[ 2213.913803] acpi LNXPOWER:02: Turning OFF
[ 2213.913864] acpi LNXPOWER:01: Turning OFF
[ 2213.913925] acpi LNXPOWER:00: Turning OFF
[ 2213.913968] OOM killer enabled.
[ 2213.913968] Restarting tasks ... done.
[ 2213.918240] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 2213.920879] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 2213.925243] Bluetooth: hci0: Device revision is 5
[ 2213.925244] Bluetooth: hci0: Secure boot is enabled
[ 2213.925245] Bluetooth: hci0: OTP lock is enabled
[ 2213.925246] Bluetooth: hci0: API lock is enabled
[ 2213.925246] Bluetooth: hci0: Debug lock is disabled
[ 2213.925247] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 2213.925251] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 2213.944200] PM: suspend exit
[ 2214.023940] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[ 2214.172199] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[ 2214.253523] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[ 2215.541411] Bluetooth: hci0: Waiting for firmware download to complete
[ 2215.542298] Bluetooth: hci0: Firmware loaded in 1588610 usecs
[ 2215.542421] Bluetooth: hci0: Waiting for device to boot
[ 2215.553324] Bluetooth: hci0: Device booted in 10763 usecs
[ 2215.553329] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 2215.557356] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 2217.990615] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 2218.000556] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 2218.012260] wlp2s0: authenticated
[ 2218.019054] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 2218.022693] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 2218.025959] wlp2s0: associated
[ 2218.153711] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 2218.205006] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 2234.448686] audit: type=1400 audit(1583410562.430:47): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=6157 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[ 2234.453446] audit: type=1400 audit(1583410562.438:48): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=6157 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[ 2234.463307] audit: type=1400 audit(1583410562.446:49): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=6157 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[ 2234.466240] audit: type=1400 audit(1583410562.450:50): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=6157 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[ 2234.484557] audit: type=1400 audit(1583410562.466:51): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.cache/mesa_shader_cache/index" pid=6157 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1001 ouid=1001
[ 2234.487290] audit: type=1400 audit(1583410562.470:52): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=6157 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[ 2241.297682] audit: type=1400 audit(1583410569.283:53): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.thunderbird/profiles.ini" pid=6156 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=1001
[ 2241.303490] audit: type=1400 audit(1583410569.287:54): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.thunderbird/8nf8t28g.default/secmod.db" pid=6156 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=1001
[ 2241.305916] audit: type=1400 audit(1583410569.291:55): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.thunderbird/8nf8t28g.default/cert8.db" pid=6156 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1001 ouid=1001
[ 2241.308061] audit: type=1400 audit(1583410569.291:56): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.thunderbird/8nf8t28g.default/key3.db" pid=6156 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1001 ouid=1001
[ 3150.267140] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 3150.276857] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 3150.282632] wlp2s0: authenticated
[ 3150.284633] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 3150.288339] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 3150.294151] wlp2s0: associated
[ 3150.294234] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 3158.191380] wlp2s0: Connection to AP 6e:c7:ec:55:53:ba lost
[ 3160.307895] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 3160.317266] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 3160.402709] wlp2s0: authenticated
[ 3160.405197] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 3160.412415] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 3160.413799] wlp2s0: associated
[ 3160.430517] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 3165.359100] wlp2s0: Connection to AP 6e:c7:ec:55:53:ba lost
[ 3166.372553] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 3166.384183] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 3166.387133] wlp2s0: authenticated
[ 3166.396456] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 3166.405030] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 3166.414162] wlp2s0: associated
[ 3166.472125] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 3168.841249] wlp2s0: Connection to AP 6e:c7:ec:55:53:ba lost
[ 3172.105510] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 3172.116084] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 3172.131262] wlp2s0: authenticated
[ 3172.132786] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 3172.141792] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 3172.150510] wlp2s0: associated
[ 3172.206500] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 3179.490460] wlp2s0: Connection to AP 6e:c7:ec:55:53:ba lost
[ 3181.839971] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 3181.851298] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 3181.854711] wlp2s0: authenticated
[ 3181.863293] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 3181.868479] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 3181.877255] wlp2s0: associated
[ 3182.040056] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 3190.140120] wlp2s0: Connection to AP 6e:c7:ec:55:53:ba lost
[ 3190.839680] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 3190.851160] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 3190.862945] wlp2s0: authenticated
[ 3190.867165] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 3190.873226] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 3190.876593] wlp2s0: associated
[ 3191.051275] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 3276.484139] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 3276.497933] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 3276.522594] wlp2s0: authenticated
[ 3276.529968] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 3276.536782] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 3276.541257] wlp2s0: associated
[ 3276.654056] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 3318.841538] wlp2s0: deauthenticating from 6e:c7:ec:55:53:ba by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3322.789591] PM: suspend entry (deep)
[ 3322.789594] PM: Syncing filesystems ... done.
[ 3322.796840] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 3322.800033] OOM killer disabled.
[ 3322.800035] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3322.801821] printk: Suspending console(s) (use no_console_suspend to debug)
[ 3322.828177] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3322.828975] sd 0:0:0:0: [sda] Stopping disk
[ 3322.969261] ACPI: EC: interrupt blocked
[ 3323.016867] ACPI: Preparing to enter system sleep state S3
[ 3323.020345] ACPI: EC: event blocked
[ 3323.020347] ACPI: EC: EC stopped
[ 3323.020349] PM: Saving platform NVS memory
[ 3323.020500] Disabling non-boot CPUs ...
[ 3323.021181] IRQ 125: no longer affine to CPU1
[ 3323.022219] smpboot: CPU 1 is now offline
[ 3323.024661] IRQ 128: no longer affine to CPU2
[ 3323.025681] smpboot: CPU 2 is now offline
[ 3323.027701] IRQ 123: no longer affine to CPU3
[ 3323.027710] IRQ 124: no longer affine to CPU3
[ 3323.027722] IRQ 127: no longer affine to CPU3
[ 3323.028772] smpboot: CPU 3 is now offline
[ 3323.032375] ACPI: Low-level resume complete
[ 3323.032474] ACPI: EC: EC started
[ 3323.032475] PM: Restoring platform NVS memory
[ 3323.034919] Enabling non-boot CPUs ...
[ 3323.034969] x86: Booting SMP configuration:
[ 3323.034969] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3323.035326] microcode: sig=0x806e9, pf=0x80, revision=0x38
[ 3323.037117]  cache: parent cpu1 should not be sleeping
[ 3323.037369] CPU1 is up
[ 3323.037415] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 3323.037742] microcode: sig=0x806e9, pf=0x80, revision=0xca
[ 3323.037876]  cache: parent cpu2 should not be sleeping
[ 3323.038278] CPU2 is up
[ 3323.038340] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3323.038776]  cache: parent cpu3 should not be sleeping
[ 3323.039012] CPU3 is up
[ 3323.042562] ACPI: Waking up from system sleep state S3
[ 3323.057231] ACPI: EC: interrupt unblocked
[ 3323.097889] ACPI: EC: event unblocked
[ 3323.098172] usb usb1: root hub lost power or was reset
[ 3323.098177] usb usb2: root hub lost power or was reset
[ 3323.101324] sd 0:0:0:0: [sda] Starting disk
[ 3323.419262] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3323.424831] ata1.00: configured for UDMA/133
[ 3323.435199] ata1.00: Enabling discard_zeroes_data
[ 3323.455358] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[ 3323.731065] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 3324.006783] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[ 3326.127085] acpi LNXPOWER:13: Turning OFF
[ 3326.127313] acpi LNXPOWER:12: Turning OFF
[ 3326.127530] acpi LNXPOWER:11: Turning OFF
[ 3326.127747] acpi LNXPOWER:10: Turning OFF
[ 3326.127962] acpi LNXPOWER:0f: Turning OFF
[ 3326.128287] acpi LNXPOWER:0e: Turning OFF
[ 3326.128502] acpi LNXPOWER:0d: Turning OFF
[ 3326.128718] acpi LNXPOWER:0c: Turning OFF
[ 3326.128931] acpi LNXPOWER:0b: Turning OFF
[ 3326.129145] acpi LNXPOWER:0a: Turning OFF
[ 3326.129359] acpi LNXPOWER:09: Turning OFF
[ 3326.129572] acpi LNXPOWER:08: Turning OFF
[ 3326.129785] acpi LNXPOWER:07: Turning OFF
[ 3326.129999] acpi LNXPOWER:06: Turning OFF
[ 3326.130212] acpi LNXPOWER:05: Turning OFF
[ 3326.130424] acpi LNXPOWER:04: Turning OFF
[ 3326.130636] acpi LNXPOWER:03: Turning OFF
[ 3326.130849] acpi LNXPOWER:02: Turning OFF
[ 3326.131062] acpi LNXPOWER:01: Turning OFF
[ 3326.131273] acpi LNXPOWER:00: Turning OFF
[ 3326.131412] OOM killer enabled.
[ 3326.131414] Restarting tasks ... 
[ 3326.131840] usb 1-2: USB disconnect, device number 5
[ 3326.149966] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 3326.153482] done.
[ 3326.155939] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 3326.156981] Bluetooth: hci0: Device revision is 5
[ 3326.156982] Bluetooth: hci0: Secure boot is enabled
[ 3326.156983] Bluetooth: hci0: OTP lock is enabled
[ 3326.156983] Bluetooth: hci0: API lock is enabled
[ 3326.156984] Bluetooth: hci0: Debug lock is disabled
[ 3326.156987] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 3326.157231] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 3326.172633] PM: suspend exit
[ 3326.269941] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[ 3326.419460] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[ 3326.501034] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[ 3327.718429] Bluetooth: hci0: Waiting for firmware download to complete
[ 3327.719014] Bluetooth: hci0: Firmware loaded in 1547366 usecs
[ 3327.719131] Bluetooth: hci0: Waiting for device to boot
[ 3327.730043] Bluetooth: hci0: Device booted in 10709 usecs
[ 3327.730213] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 3327.734053] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 3369.486929] asus_wmi: Unknown key cf pressed
[ 3469.663116] usb 1-2: new low-speed USB device number 6 using xhci_hcd
[ 3469.820074] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[ 3469.820080] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3469.820083] usb 1-2: Product: Usb Mouse
[ 3469.820086] usb 1-2: Manufacturer: SIGMACHIP
[ 3469.824358] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1C4F:0034.0003/input/input21
[ 3469.887500] hid-generic 0003:1C4F:0034.0003: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-2/input0
[ 3483.356486] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[ 3483.365855] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[ 3483.372690] wlp2s0: authenticated
[ 3483.376461] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[ 3483.406332] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[ 3483.411060] wlp2s0: associated
[ 3483.447954] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 3483.539472] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[ 3510.005194] input: 04:4E:AF:33:06:19 as /devices/virtual/input/input22
[ 8532.152616] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=388644 end=388645) time 1718 us, min 1016, max 1023, scanline start 954, end 25
[ 9641.100353] input: 04:4E:AF:33:06:19 as /devices/virtual/input/input23
[ 9789.405113] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=482969 end=482970) time 989 us, min 1016, max 1023, scanline start 978, end 1058
[11778.116359] usb 1-2: USB disconnect, device number 6
[11861.742356] wlp2s0: deauthenticating from 6e:c7:ec:55:53:ba by local choice (Reason: 3=DEAUTH_LEAVING)
[11865.160171] PM: suspend entry (deep)
[11865.160173] PM: Syncing filesystems ... done.
[11865.165845] Freezing user space processes ... (elapsed 0.070 seconds) done.
[11865.236176] OOM killer disabled.
[11865.236177] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11865.237812] printk: Suspending console(s) (use no_console_suspend to debug)
[11865.260062] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11865.260777] sd 0:0:0:0: [sda] Stopping disk
[11866.177667] ACPI: EC: interrupt blocked
[11866.224785] ACPI: Preparing to enter system sleep state S3
[11866.228024] ACPI: EC: event blocked
[11866.228026] ACPI: EC: EC stopped
[11866.228027] PM: Saving platform NVS memory
[11866.228163] Disabling non-boot CPUs ...
[11866.228895] IRQ 125: no longer affine to CPU1
[11866.229911] smpboot: CPU 1 is now offline
[11866.231598] IRQ 128: no longer affine to CPU2
[11866.233379] smpboot: CPU 2 is now offline
[11866.234604] IRQ 123: no longer affine to CPU3
[11866.234612] IRQ 124: no longer affine to CPU3
[11866.234621] IRQ 127: no longer affine to CPU3
[11866.235655] smpboot: CPU 3 is now offline
[11866.239387] ACPI: Low-level resume complete
[11866.239485] ACPI: EC: EC started
[11866.239486] PM: Restoring platform NVS memory
[11866.241902] Enabling non-boot CPUs ...
[11866.241957] x86: Booting SMP configuration:
[11866.241957] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11866.242314] microcode: sig=0x806e9, pf=0x80, revision=0x38
[11866.244105]  cache: parent cpu1 should not be sleeping
[11866.244353] CPU1 is up
[11866.244392] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11866.244719] microcode: sig=0x806e9, pf=0x80, revision=0xca
[11866.244856]  cache: parent cpu2 should not be sleeping
[11866.245256] CPU2 is up
[11866.245291] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11866.245728]  cache: parent cpu3 should not be sleeping
[11866.245977] CPU3 is up
[11866.249525] ACPI: Waking up from system sleep state S3
[11866.264206] ACPI: EC: interrupt unblocked
[11866.306414] ACPI: EC: event unblocked
[11866.308536] sd 0:0:0:0: [sda] Starting disk
[11866.365682] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout
[11866.611979] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[11866.623432] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11866.699398] ata1.00: configured for UDMA/133
[11866.719747] ata1.00: Enabling discard_zeroes_data
[11866.888001] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[11867.164061] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[11867.316502] acpi LNXPOWER:13: Turning OFF
[11867.316797] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[11867.317868] acpi LNXPOWER:12: Turning OFF
[11867.318199] acpi LNXPOWER:11: Turning OFF
[11867.318420] acpi LNXPOWER:10: Turning OFF
[11867.318635] acpi LNXPOWER:0f: Turning OFF
[11867.318848] acpi LNXPOWER:0e: Turning OFF
[11867.319062] acpi LNXPOWER:0d: Turning OFF
[11867.319277] acpi LNXPOWER:0c: Turning OFF
[11867.319490] acpi LNXPOWER:0b: Turning OFF
[11867.319765] acpi LNXPOWER:0a: Turning OFF
[11867.319980] acpi LNXPOWER:09: Turning OFF
[11867.320194] acpi LNXPOWER:08: Turning OFF
[11867.320406] acpi LNXPOWER:07: Turning OFF
[11867.320621] acpi LNXPOWER:06: Turning OFF
[11867.320834] acpi LNXPOWER:05: Turning OFF
[11867.321046] acpi LNXPOWER:04: Turning OFF
[11867.321252] acpi LNXPOWER:03: Turning OFF
[11867.321314] acpi LNXPOWER:02: Turning OFF
[11867.321376] acpi LNXPOWER:01: Turning OFF
[11867.321437] acpi LNXPOWER:00: Turning OFF
[11867.321478] OOM killer enabled.
[11867.321479] Restarting tasks ... 
[11867.323791] Bluetooth: hci0: Device revision is 5
[11867.323793] Bluetooth: hci0: Secure boot is enabled
[11867.323794] Bluetooth: hci0: OTP lock is enabled
[11867.323795] Bluetooth: hci0: API lock is enabled
[11867.323797] Bluetooth: hci0: Debug lock is disabled
[11867.323799] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[11867.323803] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[11867.336178] done.
[11867.338742] thermal thermal_zone9: failed to read out thermal zone (-61)
[11867.349002] PM: suspend exit
[11867.445428] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[11867.592951] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[11867.674237] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[11869.010279] Bluetooth: hci0: Waiting for firmware download to complete
[11869.010816] Bluetooth: hci0: Firmware loaded in 1654803 usecs
[11869.010882] Bluetooth: hci0: Waiting for device to boot
[11869.021966] Bluetooth: hci0: Device booted in 10884 usecs
[11869.021970] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[11869.026061] Bluetooth: hci0: Applying Intel DDC parameters completed
[11871.309118] wlp2s0: authenticate with 6e:c7:ec:55:53:ba
[11871.319678] wlp2s0: send auth to 6e:c7:ec:55:53:ba (try 1/3)
[11871.327584] wlp2s0: authenticated
[11871.331644] wlp2s0: associate with 6e:c7:ec:55:53:ba (try 1/3)
[11871.335309] wlp2s0: RX AssocResp from 6e:c7:ec:55:53:ba (capab=0x431 status=0 aid=1)
[11871.345788] wlp2s0: associated
[11871.461343] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 6e:c7:ec:55:53:ba
[11871.515491] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[11872.155679] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[11876.244185] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[11876.244307] usb usb2-port2: attempt power cycle
[11880.652235] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[11884.739619] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[11884.739714] usb usb2-port2: unable to enumerate USB device
[11895.160798] wlp2s0: deauthenticating from 6e:c7:ec:55:53:ba by local choice (Reason: 3=DEAUTH_LEAVING)
[11895.618237] PM: suspend entry (deep)
[11895.618239] PM: Syncing filesystems ... done.
[11895.623803] Freezing user space processes ... (elapsed 0.002 seconds) done.
[11895.626077] OOM killer disabled.
[11895.626077] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11895.627499] printk: Suspending console(s) (use no_console_suspend to debug)
[11895.648980] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11895.649741] sd 0:0:0:0: [sda] Stopping disk
[11895.769273] ACPI: EC: interrupt blocked
[11895.816482] ACPI: Preparing to enter system sleep state S3
[11895.819939] ACPI: EC: event blocked
[11895.819941] ACPI: EC: EC stopped
[11895.819942] PM: Saving platform NVS memory
[11895.820095] Disabling non-boot CPUs ...
[11895.820877] IRQ 125: no longer affine to CPU1
[11895.821937] smpboot: CPU 1 is now offline
[11895.823776] IRQ 128: no longer affine to CPU2
[11895.825609] smpboot: CPU 2 is now offline
[11895.826834] IRQ 123: no longer affine to CPU3
[11895.826848] IRQ 127: no longer affine to CPU3
[11895.827893] smpboot: CPU 3 is now offline
[11895.831470] ACPI: Low-level resume complete
[11895.831569] ACPI: EC: EC started
[11895.831570] PM: Restoring platform NVS memory
[11895.833993] Enabling non-boot CPUs ...
[11895.834060] x86: Booting SMP configuration:
[11895.834060] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11895.834418] microcode: sig=0x806e9, pf=0x80, revision=0x38
[11895.836235]  cache: parent cpu1 should not be sleeping
[11895.836487] CPU1 is up
[11895.836531] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11895.836858] microcode: sig=0x806e9, pf=0x80, revision=0xca
[11895.837011]  cache: parent cpu2 should not be sleeping
[11895.837410] CPU2 is up
[11895.837441] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11895.837908]  cache: parent cpu3 should not be sleeping
[11895.838134] CPU3 is up
[11895.841607] ACPI: Waking up from system sleep state S3
[11895.855714] ACPI: EC: interrupt unblocked
[11895.897751] ACPI: EC: event unblocked
[11895.898290] usb usb1: root hub lost power or was reset
[11895.898295] usb usb2: root hub lost power or was reset
[11895.900779] sd 0:0:0:0: [sda] Starting disk
[11896.215345] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11896.221072] ata1.00: configured for UDMA/133
[11896.231487] ata1.00: Enabling discard_zeroes_data
[11896.255495] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[11896.531531] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[11896.807434] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[11896.960433] acpi LNXPOWER:13: Turning OFF
[11896.960660] acpi LNXPOWER:12: Turning OFF
[11896.960875] acpi LNXPOWER:11: Turning OFF
[11896.961092] acpi LNXPOWER:10: Turning OFF
[11896.961307] acpi LNXPOWER:0f: Turning OFF
[11896.961521] acpi LNXPOWER:0e: Turning OFF
[11896.961735] acpi LNXPOWER:0d: Turning OFF
[11896.961950] acpi LNXPOWER:0c: Turning OFF
[11896.962163] acpi LNXPOWER:0b: Turning OFF
[11896.962377] acpi LNXPOWER:0a: Turning OFF
[11896.962592] acpi LNXPOWER:09: Turning OFF
[11896.962806] acpi LNXPOWER:08: Turning OFF
[11896.963019] acpi LNXPOWER:07: Turning OFF
[11896.963274] acpi LNXPOWER:06: Turning OFF
[11896.963501] acpi LNXPOWER:05: Turning OFF
[11896.963715] acpi LNXPOWER:04: Turning OFF
[11896.963927] acpi LNXPOWER:03: Turning OFF
[11896.964139] acpi LNXPOWER:02: Turning OFF
[11896.964352] acpi LNXPOWER:01: Turning OFF
[11896.964564] acpi LNXPOWER:00: Turning OFF
[11896.964702] OOM killer enabled.
[11896.964704] Restarting tasks ... 
[11896.983878] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[11896.984084] done.
[11896.985796] thermal thermal_zone9: failed to read out thermal zone (-61)
[11896.991573] Bluetooth: hci0: Device revision is 5
[11896.991575] Bluetooth: hci0: Secure boot is enabled
[11896.991575] Bluetooth: hci0: OTP lock is enabled
[11896.991576] Bluetooth: hci0: API lock is enabled
[11896.991576] Bluetooth: hci0: Debug lock is disabled
[11896.991577] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[11896.992693] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[11896.996619] PM: suspend exit
[11897.077817] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[11897.226523] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[11897.307460] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[11898.624929] Bluetooth: hci0: Waiting for firmware download to complete
[11898.625800] Bluetooth: hci0: Firmware loaded in 1603893 usecs
[11898.625852] Bluetooth: hci0: Waiting for device to boot
[11898.636856] Bluetooth: hci0: Device booted in 10762 usecs
[11898.636925] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[11898.640822] Bluetooth: hci0: Applying Intel DDC parameters completed
[13568.492490] PM: suspend entry (deep)
[13568.492493] PM: Syncing filesystems ... done.
[13568.498293] Freezing user space processes ... (elapsed 0.002 seconds) done.
[13568.501037] OOM killer disabled.
[13568.501038] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13568.502542] printk: Suspending console(s) (use no_console_suspend to debug)
[13568.525525] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[13568.526313] sd 0:0:0:0: [sda] Stopping disk
[13568.745828] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[13568.874185] usb 1-8: device descriptor read/64, error -71
[13569.110152] usb 1-8: device descriptor read/64, error -71
[13569.346119] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[13569.474245] usb 1-8: device descriptor read/64, error -71
[13569.710203] usb 1-8: device descriptor read/64, error -71
[13569.946103] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[13569.946292] usb 1-8: Device not responding to setup address.
[13570.154276] usb 1-8: Device not responding to setup address.
[13570.362065] usb 1-8: device not accepting address 3, error -71
[13570.490079] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[13570.490286] usb 1-8: Device not responding to setup address.
[13570.698270] usb 1-8: Device not responding to setup address.
[13570.906082] usb 1-8: device not accepting address 3, error -71
[13570.906198] usb usb1-port8: device 1-8 not suspended yet
[13570.927195] ACPI: EC: interrupt blocked
[13570.974271] ACPI: Preparing to enter system sleep state S3
[13570.977505] ACPI: EC: event blocked
[13570.977506] ACPI: EC: EC stopped
[13570.977507] PM: Saving platform NVS memory
[13570.977643] Disabling non-boot CPUs ...
[13570.978360] IRQ 125: no longer affine to CPU1
[13570.979377] smpboot: CPU 1 is now offline
[13570.981019] IRQ 128: no longer affine to CPU2
[13570.982766] smpboot: CPU 2 is now offline
[13570.983829] IRQ 123: no longer affine to CPU3
[13570.983841] IRQ 127: no longer affine to CPU3
[13570.984885] smpboot: CPU 3 is now offline
[13570.988347] ACPI: Low-level resume complete
[13570.988445] ACPI: EC: EC started
[13570.988446] PM: Restoring platform NVS memory
[13570.990888] Enabling non-boot CPUs ...
[13570.990990] x86: Booting SMP configuration:
[13570.990991] smpboot: Booting Node 0 Processor 1 APIC 0x2
[13570.991347] microcode: sig=0x806e9, pf=0x80, revision=0x38
[13570.993149]  cache: parent cpu1 should not be sleeping
[13570.993399] CPU1 is up
[13570.993424] smpboot: Booting Node 0 Processor 2 APIC 0x1
[13570.993749] microcode: sig=0x806e9, pf=0x80, revision=0xca
[13570.993875]  cache: parent cpu2 should not be sleeping
[13570.994274] CPU2 is up
[13570.994305] smpboot: Booting Node 0 Processor 3 APIC 0x3
[13570.994736]  cache: parent cpu3 should not be sleeping
[13570.994967] CPU3 is up
[13570.998447] ACPI: Waking up from system sleep state S3
[13571.012997] ACPI: EC: interrupt unblocked
[13571.051419] ACPI: EC: event unblocked
[13571.051696] usb usb1: root hub lost power or was reset
[13571.051701] usb usb2: root hub lost power or was reset
[13571.054424] sd 0:0:0:0: [sda] Starting disk
[13571.369211] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13571.374535] ata1.00: configured for UDMA/133
[13571.384832] ata1.00: Enabling discard_zeroes_data
[13571.401277] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[13571.677269] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[13571.829771] acpi LNXPOWER:13: Turning OFF
[13571.829977] acpi LNXPOWER:12: Turning OFF
[13571.830171] acpi LNXPOWER:11: Turning OFF
[13571.830367] acpi LNXPOWER:10: Turning OFF
[13571.830561] acpi LNXPOWER:0f: Turning OFF
[13571.830754] acpi LNXPOWER:0e: Turning OFF
[13571.830947] acpi LNXPOWER:0d: Turning OFF
[13571.831143] acpi LNXPOWER:0c: Turning OFF
[13571.831335] acpi LNXPOWER:0b: Turning OFF
[13571.831528] acpi LNXPOWER:0a: Turning OFF
[13571.831722] acpi LNXPOWER:09: Turning OFF
[13571.831914] acpi LNXPOWER:08: Turning OFF
[13571.832107] acpi LNXPOWER:07: Turning OFF
[13571.832300] acpi LNXPOWER:06: Turning OFF
[13571.832494] acpi LNXPOWER:05: Turning OFF
[13571.832687] acpi LNXPOWER:04: Turning OFF
[13571.832878] acpi LNXPOWER:03: Turning OFF
[13571.833095] acpi LNXPOWER:02: Turning OFF
[13571.833310] acpi LNXPOWER:01: Turning OFF
[13571.833503] acpi LNXPOWER:00: Turning OFF
[13571.833628] OOM killer enabled.
[13571.833629] Restarting tasks ... 
[13571.836376] usb 1-8: USB disconnect, device number 3
[13571.837332] done.
[13571.842879] thermal thermal_zone9: failed to read out thermal zone (-61)
[13571.854809] PM: suspend exit
[13571.959122] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[13571.981077] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[13572.106608] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[13572.109231] usb 1-8: device descriptor read/64, error -71
[13572.187786] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[13572.345249] usb 1-8: device descriptor read/64, error -71
[13572.581170] usb 1-8: new full-speed USB device number 8 using xhci_hcd
[13572.709294] usb 1-8: device descriptor read/64, error -71
[13572.945181] usb 1-8: device descriptor read/64, error -71
[13573.053234] usb usb1-port8: attempt power cycle
[13573.705166] usb 1-8: new full-speed USB device number 9 using xhci_hcd
[13573.726562] usb 1-8: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[13573.726564] usb 1-8: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[13573.726572] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[13573.726574] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[13573.731123] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[13573.738109] Bluetooth: hci0: Device revision is 5
[13573.738112] Bluetooth: hci0: Secure boot is enabled
[13573.738114] Bluetooth: hci0: OTP lock is enabled
[13573.738115] Bluetooth: hci0: API lock is enabled
[13573.738116] Bluetooth: hci0: Debug lock is disabled
[13573.738118] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[13573.738124] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[13575.390872] Bluetooth: hci0: Waiting for firmware download to complete
[13575.391112] Bluetooth: hci0: Firmware loaded in 1623726 usecs
[13575.391229] Bluetooth: hci0: Waiting for device to boot
[13575.402149] Bluetooth: hci0: Device booted in 10770 usecs
[13575.402157] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[13575.406185] Bluetooth: hci0: Applying Intel DDC parameters completed
[13575.929213] wlp2s0: authenticate with 84:d4:7e:76:a5:72
[13575.938993] wlp2s0: send auth to 84:d4:7e:76:a5:72 (try 1/3)
[13575.944577] wlp2s0: authenticated
[13575.949166] wlp2s0: associate with 84:d4:7e:76:a5:72 (try 1/3)
[13575.950005] wlp2s0: RX AssocResp from 84:d4:7e:76:a5:72 (capab=0x1401 status=0 aid=3)
[13575.963343] wlp2s0: associated
[13575.965695] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[13576.008455] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 84:d4:7e:76:a5:72
[13590.576674] wlp2s0: deauthenticating from 84:d4:7e:76:a5:72 by local choice (Reason: 3=DEAUTH_LEAVING)
[13613.257019] audit: type=1400 audit(1583488031.260:57): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=12370 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[13613.262932] audit: type=1400 audit(1583488031.268:58): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=12370 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[13613.276217] audit: type=1400 audit(1583488031.280:59): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=12370 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[13613.279715] audit: type=1400 audit(1583488031.284:60): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=12370 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[13613.305883] audit: type=1400 audit(1583488031.312:61): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.cache/mesa_shader_cache/index" pid=12370 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1001 ouid=1001
[13613.309679] audit: type=1400 audit(1583488031.316:62): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=12370 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=0
[13613.900733] audit: type=1400 audit(1583488031.904:63): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.thunderbird/profiles.ini" pid=12369 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=1001
[13613.904134] audit: type=1400 audit(1583488031.908:64): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.thunderbird/8nf8t28g.default/secmod.db" pid=12369 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1001 ouid=1001
[13613.905621] audit: type=1400 audit(1583488031.912:65): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.thunderbird/8nf8t28g.default/cert8.db" pid=12369 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1001 ouid=1001
[13613.905626] audit: type=1400 audit(1583488031.912:66): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/felix/.thunderbird/8nf8t28g.default/key3.db" pid=12369 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1001 ouid=1001
[14026.209744] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[14026.358542] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[14026.439855] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[14030.206907] wlp2s0: authenticate with 84:d4:7e:76:a5:72
[14030.214433] wlp2s0: send auth to 84:d4:7e:76:a5:72 (try 1/3)
[14030.220137] wlp2s0: authenticated
[14030.223567] wlp2s0: associate with 84:d4:7e:76:a5:72 (try 1/3)
[14030.224378] wlp2s0: RX AssocResp from 84:d4:7e:76:a5:72 (capab=0x1401 status=0 aid=3)
[14030.228065] wlp2s0: associated
[14030.229799] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[14030.255993] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 84:d4:7e:76:a5:72
[19912.712601] wlp2s0: deauthenticating from 84:d4:7e:76:a5:72 by local choice (Reason: 3=DEAUTH_LEAVING)
[19916.563668] PM: suspend entry (deep)
[19916.563671] PM: Syncing filesystems ... done.
[19916.568862] Freezing user space processes ... (elapsed 0.002 seconds) done.
[19916.571407] OOM killer disabled.
[19916.571408] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[19916.572909] printk: Suspending console(s) (use no_console_suspend to debug)
[19916.590751] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[19916.591499] sd 0:0:0:0: [sda] Stopping disk
[19916.742205] ACPI: EC: interrupt blocked
[19916.787528] ACPI: Preparing to enter system sleep state S3
[19916.790988] ACPI: EC: event blocked
[19916.790990] ACPI: EC: EC stopped
[19916.790991] PM: Saving platform NVS memory
[19916.791141] Disabling non-boot CPUs ...
[19916.791923] IRQ 125: no longer affine to CPU1
[19916.792941] smpboot: CPU 1 is now offline
[19916.794801] IRQ 128: no longer affine to CPU2
[19916.796630] smpboot: CPU 2 is now offline
[19916.797970] IRQ 123: no longer affine to CPU3
[19916.797978] IRQ 124: no longer affine to CPU3
[19916.797990] IRQ 127: no longer affine to CPU3
[19916.799036] smpboot: CPU 3 is now offline
[19916.802723] ACPI: Low-level resume complete
[19916.802822] ACPI: EC: EC started
[19916.802823] PM: Restoring platform NVS memory
[19916.805273] Enabling non-boot CPUs ...
[19916.805336] x86: Booting SMP configuration:
[19916.805337] smpboot: Booting Node 0 Processor 1 APIC 0x2
[19916.805694] microcode: sig=0x806e9, pf=0x80, revision=0x38
[19916.807482]  cache: parent cpu1 should not be sleeping
[19916.807738] CPU1 is up
[19916.807765] smpboot: Booting Node 0 Processor 2 APIC 0x1
[19916.808090] microcode: sig=0x806e9, pf=0x80, revision=0xca
[19916.808217]  cache: parent cpu2 should not be sleeping
[19916.808615] CPU2 is up
[19916.808648] smpboot: Booting Node 0 Processor 3 APIC 0x3
[19916.809085]  cache: parent cpu3 should not be sleeping
[19916.809328] CPU3 is up
[19916.812857] ACPI: Waking up from system sleep state S3
[19916.827086] ACPI: EC: interrupt unblocked
[19916.868666] ACPI: EC: event unblocked
[19916.869028] usb usb1: root hub lost power or was reset
[19916.869032] usb usb2: root hub lost power or was reset
[19916.872505] sd 0:0:0:0: [sda] Starting disk
[19917.186406] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[19917.191526] ata1.00: configured for UDMA/133
[19917.201950] ata1.00: Enabling discard_zeroes_data
[19917.222542] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[19917.498494] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[19917.774594] usb 1-8: reset full-speed USB device number 9 using xhci_hcd
[19917.902420] usb 1-8: device descriptor read/64, error -71
[19918.138520] usb 1-8: device descriptor read/64, error -71
[19918.375049] usb 1-8: reset full-speed USB device number 9 using xhci_hcd
[19918.503042] usb 1-8: device descriptor read/64, error -71
[19918.739131] usb 1-8: device descriptor read/64, error -71
[19918.975071] usb 1-8: reset full-speed USB device number 9 using xhci_hcd
[19918.975317] usb 1-8: Device not responding to setup address.
[19919.183213] usb 1-8: Device not responding to setup address.
[19919.390975] usb 1-8: device not accepting address 9, error -71
[19919.518952] usb 1-8: reset full-speed USB device number 9 using xhci_hcd
[19919.519185] usb 1-8: Device not responding to setup address.
[19919.727193] usb 1-8: Device not responding to setup address.
[19919.934943] usb 1-8: device not accepting address 9, error -71
[19919.936091] acpi LNXPOWER:13: Turning OFF
[19919.936320] acpi LNXPOWER:12: Turning OFF
[19919.936537] acpi LNXPOWER:11: Turning OFF
[19919.936755] acpi LNXPOWER:10: Turning OFF
[19919.936971] acpi LNXPOWER:0f: Turning OFF
[19919.937185] acpi LNXPOWER:0e: Turning OFF
[19919.937401] acpi LNXPOWER:0d: Turning OFF
[19919.937619] acpi LNXPOWER:0c: Turning OFF
[19919.937835] acpi LNXPOWER:0b: Turning OFF
[19919.938051] acpi LNXPOWER:0a: Turning OFF
[19919.938346] acpi LNXPOWER:09: Turning OFF
[19919.938574] acpi LNXPOWER:08: Turning OFF
[19919.938789] acpi LNXPOWER:07: Turning OFF
[19919.939006] acpi LNXPOWER:06: Turning OFF
[19919.939221] acpi LNXPOWER:05: Turning OFF
[19919.939435] acpi LNXPOWER:04: Turning OFF
[19919.939651] acpi LNXPOWER:03: Turning OFF
[19919.939867] acpi LNXPOWER:02: Turning OFF
[19919.940081] acpi LNXPOWER:01: Turning OFF
[19919.940300] acpi LNXPOWER:00: Turning OFF
[19919.940345] OOM killer enabled.
[19919.940346] Restarting tasks ... 
[19919.940730] usb 1-8: USB disconnect, device number 9
[19919.943016] done.
[19919.954153] thermal thermal_zone9: failed to read out thermal zone (-61)
[19919.969996] PM: suspend exit
[19920.063590] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[19920.094322] usb 1-8: new full-speed USB device number 10 using xhci_hcd
[19920.213317] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[19920.222629] usb 1-8: device descriptor read/64, error -71
[19920.294862] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring
[19920.458364] usb 1-8: device descriptor read/64, error -71
[19920.694469] usb 1-8: new full-speed USB device number 11 using xhci_hcd
[19920.822335] usb 1-8: device descriptor read/64, error -71
[19921.058392] usb 1-8: device descriptor read/64, error -71
[19921.166437] usb usb1-port8: attempt power cycle
[19921.818296] usb 1-8: new full-speed USB device number 12 using xhci_hcd
[19921.818424] usb 1-8: Device not responding to setup address.
[19922.026407] usb 1-8: Device not responding to setup address.
[19922.234350] usb 1-8: device not accepting address 12, error -71
[19922.362333] usb 1-8: new full-speed USB device number 13 using xhci_hcd
[19922.362518] usb 1-8: Device not responding to setup address.
[19922.570502] usb 1-8: Device not responding to setup address.
[19922.778344] usb 1-8: device not accepting address 13, error -71
[19922.778454] usb usb1-port8: unable to enumerate USB device
[19923.914703] wlp2s0: authenticate with 84:d4:7e:75:a0:92
[19923.922814] wlp2s0: send auth to 84:d4:7e:75:a0:92 (try 1/3)
[19923.928646] wlp2s0: authenticated
[19923.930321] wlp2s0: associate with 84:d4:7e:75:a0:92 (try 1/3)
[19923.931184] wlp2s0: RX AssocResp from 84:d4:7e:75:a0:92 (capab=0x1401 status=0 aid=5)
[19923.936227] wlp2s0: associated
[19923.936316] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 84:d4:7e:75:a0:92
[19923.937715] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
felix@henri-UX330UAK:~$

xubu1957 · Le 06/03/2020, à 15:18

Bonjour,

Pour :

[11872.155679] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[11876.244185] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[11876.244307] usb usb2-port2: attempt power cycle
[11880.652235] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[11884.739619] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[11884.739714] usb usb2-port2: unable to enumerate USB device

Il y avait ce bug > [Regression] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?

Si je prends :

Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc

Ce message ressort, entre autres, dans :

> bugs.launchpad.net/ubuntu/+source/linux/+bug/1790454 Bluetooth (btintel) stops working after suspend/resume

> bugs.launchpad.net/ubuntu/+source/linux/+bug/1832988 Intel 8260 Bluetooth not working

> bugzilla.redhat.com/show_bug.cgi?id=1323833 Bluetooth module in Intel 8260 fails to init

> askubuntu.com/questions/1207564/another-bluetooth-problem-ubuntu-18-04-cannot-find-adaptor-at-all

Felix37 · Le 07/03/2020, à 17:26

Merci bien, je vais aller fouiller là-dedans ! Je vous tiendrai au courant sur ce post si jamais l'une des solutions résout le problème pour de bon, ça pourrait servir à d'autres !

Felix37 · Le 10/03/2020, à 13:52

Bonjour tout le monde,

Alors que je suis de nouveau confronté à mon problème de Bluetooth, j'ai été voir les liens proposés par @xubu1957

Sur ce lien notamment (https://bugs.launchpad.net/ubuntu/+sour … ug/1790454), je me retrouve confronté à mes carences (énormes) en informatique, car je ne comprend pas comment utiliser les solutions proposées sur le topic ... Par exemple, plusieurs utilisateurs parlent de « btusb.enable_autosuspend=0 » mais il ne s'agit visiblement pas d'une commande car mon terminal me renvoie :

felix@henri-UX330UAK:~$ felix@henri-UX330UAK:~$ cat /etc/modprobe.d/btusb.conf
cat: /etc/modprobe.d/btusb.conf: Aucun fichier ou dossier de ce type
felix@henri-UX330UAK:~$ options btusb enable_autosuspend=0
options : commande introuvable
felix@henri-UX330UAK:~$

Puisque le ridicule ne tue pas, et peut être l'occasion de leçons intéressantes, je poursuis :
Certains ont aussi proposé des patchs à essayer comme celui-ci par exemple https://launchpadlibrarian.net/40537500 … 0454.patch ou encore https://launchpadlibrarian.net/42895125 … pend.patch ; le problème étant que je ne sais pas quoi faire de ces fichiers textes ...

Enfin, je vois que les discussions gravitent majoritairement autour d'histoires de kernels que je peine à comprendre ...

Si vous pouvez m'apporter de l'aide tant mieux, mais je comprendrai que vous ayez d'autres chats à fouetter, le principal problème étant mon incompétence informatique !

xubu1957 · Le 10/03/2020, à 13:56

Bonjour,

Tu connais cette page kernel ?

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#26 Le 03/03/2020, à 18:26

Re : (Encore un) problème d'activation Bluetooth

#27 Le 04/03/2020, à 14:32

Re : (Encore un) problème d'activation Bluetooth

#28 Le 04/03/2020, à 14:46

Re : (Encore un) problème d'activation Bluetooth

#29 Le 04/03/2020, à 15:13

Re : (Encore un) problème d'activation Bluetooth

#30 Le 04/03/2020, à 15:22

Re : (Encore un) problème d'activation Bluetooth

#31 Le 04/03/2020, à 15:29

Re : (Encore un) problème d'activation Bluetooth

#32 Le 04/03/2020, à 15:32

Re : (Encore un) problème d'activation Bluetooth

#33 Le 04/03/2020, à 15:35

Re : (Encore un) problème d'activation Bluetooth

#34 Le 04/03/2020, à 15:38

Re : (Encore un) problème d'activation Bluetooth

#35 Le 04/03/2020, à 15:39

Re : (Encore un) problème d'activation Bluetooth

#36 Le 04/03/2020, à 15:46

Re : (Encore un) problème d'activation Bluetooth

#37 Le 04/03/2020, à 16:14

Re : (Encore un) problème d'activation Bluetooth

#38 Le 04/03/2020, à 16:19

Re : (Encore un) problème d'activation Bluetooth

#39 Le 04/03/2020, à 16:19

Re : (Encore un) problème d'activation Bluetooth

#40 Le 04/03/2020, à 16:36

Re : (Encore un) problème d'activation Bluetooth

#41 Le 04/03/2020, à 21:33

Re : (Encore un) problème d'activation Bluetooth

#42 Le 04/03/2020, à 21:38

Re : (Encore un) problème d'activation Bluetooth

#43 Le 04/03/2020, à 22:03

Re : (Encore un) problème d'activation Bluetooth

#44 Le 04/03/2020, à 22:43

Re : (Encore un) problème d'activation Bluetooth

#45 Le 05/03/2020, à 13:56

Re : (Encore un) problème d'activation Bluetooth

#46 Le 06/03/2020, à 15:01

Re : (Encore un) problème d'activation Bluetooth

#47 Le 06/03/2020, à 15:18

Re : (Encore un) problème d'activation Bluetooth

#48 Le 07/03/2020, à 17:26

Re : (Encore un) problème d'activation Bluetooth

#49 Le 10/03/2020, à 13:52

Re : (Encore un) problème d'activation Bluetooth

#50 Le 10/03/2020, à 13:56

Re : (Encore un) problème d'activation Bluetooth

Pied de page des forums