Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 07/05/2020, à 15:36

Nuliel

Re : Connexion ecouteurs bluetooth

Hello,
Les écouteurs sont ils encore vu par le logiciel qui te permet de chercher les périphériques bluetooth? (blueman, gnome-bluetooth, bluedevil selon ta variante)
Tu peux lorsque les écouteurs sont prêts à être appairé donner

hcitool scan

Si tu arrives à appairer et aller à l'étape d'après (choisir handsfree ou périphérique audio ou autre), tu peux lancer une vidéo sur firefox, la laisser tourner et pendant ce temps aller dans pulseaudio (contrôle de volume), dans l'onglet lecture tu devrais pouvoir rediriger le son de firefox vers tes écouteurs.

Hors ligne

#27 Le 07/05/2020, à 15:44

alduc31

Re : Connexion ecouteurs bluetooth

Salut,

Knackes a écrit :
knackes@knackes-ZenBook:~$ bluetoothctl info
Device 38:18:4C:50:13:79 (public)
	Name: LE_WF-1000XM3
	Alias: LE_WF-1000XM3
	Appearance: 0x1234
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: yes
	LegacyPairing: no
	UUID: Unknown                   (00000709-0000-1000-8000-00805f9b34fb)
	UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)
	UUID: Unknown                   (0000fe03-0000-1000-8000-00805f9b34fb)
	UUID: Vendor specific           (55f80aef-d89f-41a4-9e36-0ffc88dc81ce)
	UUID: Vendor specific           (5b833e05-6bc7-4802-8e9a-723ceca4bd8f)
	UUID: Vendor specific           (5b833e06-6bc7-4802-8e9a-723ceca4bd8f)
	UUID: Vendor specific           (67a846ad-de3e-451b-a6d8-7b2899ca2370)
	UUID: Vendor specific           (91c10d9c-aaef-42bd-b6d6-8a648c19213d)
	UUID: Vendor specific           (dc405470-a351-4a59-97d8-2e2e3b207fbb)
	UUID: Vendor specific           (fe59bfa8-7fe3-4a05-9d94-99fadc69faff)
	ManufacturerData Key: 0x012d
	ManufacturerData Value:
  04 00 01 32 00 01 00 00 00 00 00 60 cb 00 00 00  ...2.......`....
  00 00 00                                         ...             
	ServiceData Key: 0000fe2c-0000-1000-8000-00805f9b34fb
	ServiceData Value:
  38 c9 5c                                         8.\             
	RSSI: -55
	TxPower: -12
knackes@knackes-ZenBook:~$ 

Tes écouteurs semblent être mal reconnus comme périphérique audio. Dans un des UUID il devrait y avoir Audio Sink.
Exemple :

Device 98:09:CF:BB:58:F6 (public)
	Name: OnePlus Bullets Wireless Z
	Alias: OnePlus Bullets Wireless Z
	Class: 0x00240418
	Icon: audio-card
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: yes
	LegacyPairing: no
	UUID: Serial Port               (00001101-0000-1000-8000-00805f9b34fb)
	UUID: Headset                   (00001108-0000-1000-8000-00805f9b34fb)
	UUID: Audio Sink                (0000110b-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
	UUID: Advanced Audio Distribu.. (0000110d-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control        (0000110e-0000-1000-8000-00805f9b34fb)
	UUID: Handsfree                 (0000111e-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)
	Modalias: bluetooth:v000ApFFFFdFFFF

Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Hors ligne

#28 Le 07/05/2020, à 20:14

Knackes

Re : Connexion ecouteurs bluetooth

Naziel a écrit :

Hello,
Les écouteurs sont ils encore vu par le logiciel qui te permet de chercher les périphériques bluetooth? (blueman, gnome-bluetooth, bluedevil selon ta variante)
Tu peux lorsque les écouteurs sont prêts à être appairé donner

hcitool scan

Si tu arrives à appairer et aller à l'étape d'après (choisir handsfree ou périphérique audio ou autre), tu peux lancer une vidéo sur firefox, la laisser tourner et pendant ce temps aller dans pulseaudio (contrôle de volume), dans l'onglet lecture tu devrais pouvoir rediriger le son de firefox vers tes écouteurs.

Hello !
La commande hcitool scan ne me retourne rien hmm
Et les écouteurs sont bien détectés par le bluetooth, j'arrive à les appairer mais ils ne sont pas détectés comme périphérique audio, aucun moyen donc d'envoyer le son dessus hmm
A aucun moment je ne peux définir manuellement que c'est un périphérique audio.

Hors ligne

#29 Le 07/05/2020, à 20:16

Knackes

Re : Connexion ecouteurs bluetooth

alduc31 a écrit :

Salut,

Knackes a écrit :
knackes@knackes-ZenBook:~$ bluetoothctl info
Device 38:18:4C:50:13:79 (public)
	Name: LE_WF-1000XM3
	Alias: LE_WF-1000XM3
	Appearance: 0x1234
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: yes
	LegacyPairing: no
	UUID: Unknown                   (00000709-0000-1000-8000-00805f9b34fb)
	UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)
	UUID: Unknown                   (0000fe03-0000-1000-8000-00805f9b34fb)
	UUID: Vendor specific           (55f80aef-d89f-41a4-9e36-0ffc88dc81ce)
	UUID: Vendor specific           (5b833e05-6bc7-4802-8e9a-723ceca4bd8f)
	UUID: Vendor specific           (5b833e06-6bc7-4802-8e9a-723ceca4bd8f)
	UUID: Vendor specific           (67a846ad-de3e-451b-a6d8-7b2899ca2370)
	UUID: Vendor specific           (91c10d9c-aaef-42bd-b6d6-8a648c19213d)
	UUID: Vendor specific           (dc405470-a351-4a59-97d8-2e2e3b207fbb)
	UUID: Vendor specific           (fe59bfa8-7fe3-4a05-9d94-99fadc69faff)
	ManufacturerData Key: 0x012d
	ManufacturerData Value:
  04 00 01 32 00 01 00 00 00 00 00 60 cb 00 00 00  ...2.......`....
  00 00 00                                         ...             
	ServiceData Key: 0000fe2c-0000-1000-8000-00805f9b34fb
	ServiceData Value:
  38 c9 5c                                         8.\             
	RSSI: -55
	TxPower: -12
knackes@knackes-ZenBook:~$ 

Tes écouteurs semblent être mal reconnus comme périphérique audio. Dans un des UUID il devrait y avoir Audio Sink.
Exemple :

Device 98:09:CF:BB:58:F6 (public)
	Name: OnePlus Bullets Wireless Z
	Alias: OnePlus Bullets Wireless Z
	Class: 0x00240418
	Icon: audio-card
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: yes
	LegacyPairing: no
	UUID: Serial Port               (00001101-0000-1000-8000-00805f9b34fb)
	UUID: Headset                   (00001108-0000-1000-8000-00805f9b34fb)
	UUID: Audio Sink                (0000110b-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
	UUID: Advanced Audio Distribu.. (0000110d-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control        (0000110e-0000-1000-8000-00805f9b34fb)
	UUID: Handsfree                 (0000111e-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)
	Modalias: bluetooth:v000ApFFFFdFFFF

Salut !

C'est bien ce que je pensais après avoir vue les écouteurs de type "Unknown" dans mes paramettres.
Une idée de comment résoudre ce genre de problème ?

Hors ligne

#30 Le 07/05/2020, à 20:51

alduc31

Re : Connexion ecouteurs bluetooth

D'après ce lien https://www.nielsvandermolen.com/blueto … es-ubuntu/ :

In my case, the system did not recognize the headphones as an audio device, and I could not change the audio profile with Blueman. To fix this, we have to enable the bluetooth-discover module in Pulseaudio, the sound system for most Linux distributions. First, we can check if the module is loaded in Pulseaudio with the pactl.
pactl list | grep -i bluetooth # Shows if Bluetooth modules are loaded

Peux tu faire :

pactl list | grep -i bluetooth

et vérifier qu'il y a bien module-bluetooth-policy et module-bluetooth-discover :

        Nom : module-bluetooth-policy
		module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
	Nom : module-bluetooth-discover
		module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
		module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
		module.description = "BlueZ 5 Bluetooth audio sink and source"
		bluetooth.protocol = "a2dp_sink"
		device.bus = "bluetooth"
		device.icon_name = "audio-headphones-bluetooth"
		device.bus = "bluetooth"
		device.icon_name = "audio-headphones-bluetooth"
		device.bus = "bluetooth"
		device.icon_name = "audio-headphones-bluetooth"
		headphone-input: Entrée Bluetooth (priority: 0, latency offset: 0 usec)

Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Hors ligne

#31 Le 07/05/2020, à 20:58

Knackes

Re : Connexion ecouteurs bluetooth

alduc31 a écrit :

D'après ce lien https://www.nielsvandermolen.com/blueto … es-ubuntu/ :

In my case, the system did not recognize the headphones as an audio device, and I could not change the audio profile with Blueman. To fix this, we have to enable the bluetooth-discover module in Pulseaudio, the sound system for most Linux distributions. First, we can check if the module is loaded in Pulseaudio with the pactl.
pactl list | grep -i bluetooth # Shows if Bluetooth modules are loaded

Peux tu faire :

pactl list | grep -i bluetooth

et vérifier qu'il y a bien module-bluetooth-policy et module-bluetooth-discover :

        Nom : module-bluetooth-policy
		module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
	Nom : module-bluetooth-discover
		module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
		module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
		module.description = "BlueZ 5 Bluetooth audio sink and source"
		bluetooth.protocol = "a2dp_sink"
		device.bus = "bluetooth"
		device.icon_name = "audio-headphones-bluetooth"
		device.bus = "bluetooth"
		device.icon_name = "audio-headphones-bluetooth"
		device.bus = "bluetooth"
		device.icon_name = "audio-headphones-bluetooth"
		headphone-input: Entrée Bluetooth (priority: 0, latency offset: 0 usec)

J'ai déjà exploré cette piste, j'ai bien les deux modules, j'ai également apporté des modifications pour que les module-bluetooth-discover et module-switch-on-connect soient chargés après module-x11-xsmp.
J'avais lu sur un forum que ça avait résolu les problèmes de certains.. Pas mon cas hmm

Merci tout de même !

Hors ligne

#32 Le 07/05/2020, à 21:05

alduc31

Re : Connexion ecouteurs bluetooth

Tu peux suivre ce qui est proposé ici : https://stackoverflow.com/questions/563 … -a2dp-sink

Remove the headphones from Bluetooth devices if previously paired

Enable pairing mode on the headphones

Open Bluetooth settings and click add

You may see already a device named LE_WH-1000XM3 of an unknown type at this point - don't pair it!

Optionally select Headphones, headsets and other audio devices from the Device type filter drop down

Wait until WH-1000XM3 device with the type Headset appears

Pair it

Run Blueman (install if you haven't yet), at this point the paired headphones device name starts with LE_WH- again

Right click on the device and select setup

Choose Audio Sink and click Next

Only at this point my headphones say to me Bluetooth connected, yay! The device name changes to WH- without the LE_ prefix (although you'd need to close and re-open Blueman to refresh the name listed, you'll see in the sound settings anyway)
   
Go to sound settings and ensure selected playback audio device is the headphones (might be not) and that the mode High Fidelity Playback (A2DP Sink) is selected (should already be)

Shortly, when headphones are connected as LE_WH-1000XM3 they don't work. It's not possible to change audio profile neither in Blueman nor mode in the sound settings, actually here they are not listed at all even though they were connected as an audio device (the wait from the point 6). When connected as WH-1000XM3 all audio functions are available and work fine (as much as there is any 'fine' for Bluetooth audio on Linux). Still may require manual selection of the desired audio profile but that's just a minor annoyance comparing the the whole headphones setup issues.

The poorest part is that as soon as I disconnect headphones and connect them again, they remain LE_WH-1000XM3 no matter what I do. So I need to unpair and go through the whole process again

Extra info: LE stands for Low Energy Bluetooth standard. I guess Headphones advertise connection in two modes, regular and LE. It's possible to connect with both but only for one audio is supported on Ubuntu 16.04. I'd like to know how to enforce the regular or completely disable the LE mode as it seems to always fallback to it and the whole pairing has to be done again.


Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Hors ligne

#33 Le 07/05/2020, à 21:17

Knackes

Re : Connexion ecouteurs bluetooth

alduc31 a écrit :

Tu peux suivre ce qui est proposé ici : https://stackoverflow.com/questions/563 … -a2dp-sink

Remove the headphones from Bluetooth devices if previously paired

Enable pairing mode on the headphones

Open Bluetooth settings and click add

You may see already a device named LE_WH-1000XM3 of an unknown type at this point - don't pair it!

Optionally select Headphones, headsets and other audio devices from the Device type filter drop down

Wait until WH-1000XM3 device with the type Headset appears

Pair it

Run Blueman (install if you haven't yet), at this point the paired headphones device name starts with LE_WH- again

Right click on the device and select setup

Choose Audio Sink and click Next

Only at this point my headphones say to me Bluetooth connected, yay! The device name changes to WH- without the LE_ prefix (although you'd need to close and re-open Blueman to refresh the name listed, you'll see in the sound settings anyway)
   
Go to sound settings and ensure selected playback audio device is the headphones (might be not) and that the mode High Fidelity Playback (A2DP Sink) is selected (should already be)

Shortly, when headphones are connected as LE_WH-1000XM3 they don't work. It's not possible to change audio profile neither in Blueman nor mode in the sound settings, actually here they are not listed at all even though they were connected as an audio device (the wait from the point 6). When connected as WH-1000XM3 all audio functions are available and work fine (as much as there is any 'fine' for Bluetooth audio on Linux). Still may require manual selection of the desired audio profile but that's just a minor annoyance comparing the the whole headphones setup issues.

The poorest part is that as soon as I disconnect headphones and connect them again, they remain LE_WH-1000XM3 no matter what I do. So I need to unpair and go through the whole process again

Extra info: LE stands for Low Energy Bluetooth standard. I guess Headphones advertise connection in two modes, regular and LE. It's possible to connect with both but only for one audio is supported on Ubuntu 16.04. I'd like to know how to enforce the regular or completely disable the LE mode as it seems to always fallback to it and the whole pairing has to be done again.

Il y à quelque chose là dedans, en effet mes écouteurs sont affichés avec un préfixe LE_ (LE_WF-1000XM3) cependant je n'ai aucun autre appareil WF-1000XM3 qui apparait, même après avoir attendu 5 bonnes minutes

Dernière modification par Knackes (Le 07/05/2020, à 21:17)

Hors ligne

#34 Le 07/05/2020, à 21:19

alduc31

Re : Connexion ecouteurs bluetooth

Je ne sais pas alors...


Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Hors ligne

#35 Le 07/05/2020, à 21:28

xubu1957

Re : Connexion ecouteurs bluetooth

Bonsoir,

Je vois :

Le 09/03/2020, darkeyras a écrit :

J'ai trouvé le problème: après une mise à niveau, il semble que le casque doit être retiré puis ajouté.

dans > forum.manjaro.org/t/sony-wh-1000xm3-bluetooth-sound-not-working/


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

Hors ligne

#36 Le 07/05/2020, à 22:20

FS

Re : Connexion ecouteurs bluetooth

Je confirme que sur mon ordi 2 boot

1° 18.04  bluetooth -> fonctionne
2° 20.04 installer récemment -> Bluetooth installé avec autant que faire se peut de facon similaire ne fonctionne pas

Hors ligne

#37 Le 08/05/2020, à 09:26

alduc31

Re : Connexion ecouteurs bluetooth

Question bête, ça le fait aussi en session liveusb ?

Perso niveau paquets installés j'ai le minimum :
blueman  (outils bluetooth, applet pour barre des taches)
bluez*   (pile protocolaire bluetooth)
libbluetooth3  (dépendance de blueman)
pulseaudio-module-bluetooth  (prise en charge du bluetooth par pulseaudio)

Peut être qu'il y a des interactions avec d'autres paquets (gnome-bluetooth, indicator-bluetooth, bluedevil...).


Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Hors ligne

#38 Le 08/05/2020, à 13:00

Knackes

Re : Connexion ecouteurs bluetooth

xubu1957 a écrit :

Bonsoir,

Je vois :

Le 09/03/2020, darkeyras a écrit :

J'ai trouvé le problème: après une mise à niveau, il semble que le casque doit être retiré puis ajouté.

dans > forum.manjaro.org/t/sony-wh-1000xm3-bluetooth-sound-not-working/

Je n'arrête pas de remove et re appairer les écouteurs après chaque modif hmm

Hors ligne

#39 Le 08/05/2020, à 13:02

Knackes

Re : Connexion ecouteurs bluetooth

alduc31 a écrit :

Question bête, ça le fait aussi en session liveusb ?

Perso niveau paquets installés j'ai le minimum :
blueman  (outils bluetooth, applet pour barre des taches)
bluez*   (pile protocolaire bluetooth)
libbluetooth3  (dépendance de blueman)
pulseaudio-module-bluetooth  (prise en charge du bluetooth par pulseaudio)

Peut être qu'il y a des interactions avec d'autres paquets (gnome-bluetooth, indicator-bluetooth, bluedevil...).

J'ai déjà tous ces paquets d'installés et à jour hmm
En liveusb j'ai essayé sous 18.04 et les écouteurs n'apparaissaient même pas dans les devices bluetooth.

Hors ligne

#40 Le 09/05/2020, à 09:39

FS

Re : Connexion ecouteurs bluetooth

Bonjour j' ai réussi à faire fonctionner mon casque bluetooth avec les outils graphique à l' aide d' une clé usb bluetooth, par contre impossible de faire fonctionner l' adaptateur bluetooth intégré à l'ordinateur .
j' ai l'impression que lors de l' installation (20.04) les outils l' on paramètrés et que les outils blueman.deb n' ont pas la priorité sur l' adaptateur intégré.

Je rappelle que j' utilise (18.04) sur ce même ordinateur qui gère parfaitement la carte bluetooth intégrée à l'ordinateur

Hors ligne

#41 Le 18/05/2020, à 19:58

alduc31

Re : Connexion ecouteurs bluetooth

Salut,

Tombé sur un ppa qui permet d'avoir plusieurs codec pour le bluetooth pulseaudio : https://launchpad.net/~berglh/+archive/ … audio-a2dp

PPA description:
Adds LDAC, aptX, aptX HD, AAC codecs support to PulseAudio
package: pulseaudio-modules-bt

HOMEPAGE: https://github.com/EHfive/pulseaudio-modules-bt
libldac: https://github.com/EHfive/ldacBT

This PPA was made to build packages for eoan and newer as the maintainer is not able to continue packaging for Ubuntu.

pulseaudio-modules-bt:

this repo is a fork of pulseaudio bluetooth modules and adds LDAC, APTX, APTX-HD, AAC support, extended configuration for SBC

Les codecs apparaissent dans le profil audio du périphérique audio :
1589832152.png

Peut être une piste pour les pb de reconnaissance de casque/écouteur bluetooth...


Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Hors ligne

#42 Le 21/05/2020, à 08:36

FS

Re : Connexion ecouteurs bluetooth

J'ai tendance à penser que ce n' est pas un problème de codec puisque mon casque fonctionne parfaitement avec 20.04 et avec une clé bluetooth usb,

mais ne fonctionne pas avec le bluetooth intégré dans l'ordinateur. (alors qu'avec 18.04 cela fonctionne).

A mon avis le problème est à l'origine du kernel, j'ai déjà eu ce genre de déconvenue avec 14.04 et la carte graphique (pas de son sur hdmi). Problème qui avait été corriger avec les distributions suivante ... 14.10 etc.

Dernière modification par FS (Le 21/05/2020, à 08:38)

Hors ligne

#43 Le 24/05/2020, à 17:14

Knackes

Re : Connexion ecouteurs bluetooth

Salut !
J'ai essayé en session live sous 18.04 et les écouteurs n'apparaissent même pas dans les devices bluetooth.
Je suis donc moyen chaud pour passer sous 18.04 et tout ce que cela entraine dans ces conditions. Avec un peu de chance une update va sortir et tout fonctionera...
Sinon en attendant si vous avez d'autres idées je suis preneur tongue

Hors ligne

#44 Le 24/05/2020, à 22:01

FS

Re : Connexion ecouteurs bluetooth

bonsoir Knackes

si tu veux essayer voir passer à 18.04 il faut que tu install une session par exemple sur un ddr usb cela évite de toucher à ton pc

Hors ligne