#1 Le 04/10/2020, à 23:58
- bozoo24
[Résolu par changement de disque] SSD en AHCI non reconnu
Bonsoir,
Je viens vous demander de l'aide car j'ai essayé de suivre plusieurs aides en ligne pour remédier à mon problème, mais rien n'y fait.
J'ai récupéré un PC portable sans OS, et je ne sais pas ce qu'il y a sur le disque. Lorsque je tente d'installer Ubuntu depuis une clé USB, le SSD n'est pas reconnu par l'installer. De même pour GParted ou fdisk.
Pourtant, le disque est bien vu par le BIOS. Je peux booter dessus mais comme il n'y a pas d'OS, il ne se passe rien.
Lorsque je fais "lscpi | grep SATA", il y a bien un output :
00:17.0 SATA controller : Intel Coporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)Modèle du PC : Asus UX430U
Modèle du SSD: Micron_1100_MTFDDAV256TBN
Voici ce que j'ai essayé pour l'instant :
- désactiver le Safe Boot
- désactiver le Secure Boot
- vérifier que le disque dur est bien en AHCI
- mettre à jour le BIOS
Je n'ai pas d'autres idées...
Je me tiens à votre disposition si vous avez besoin de plus d'informations.
Merci d'avance !
Dernière modification par Ayral (Le 10/05/2021, à 20:55)
Hors ligne
#2 Le 06/10/2020, à 10:36
- LukePerp
Re : [Résolu par changement de disque] SSD en AHCI non reconnu
Bonjour,
Voyons voir, il nous faut plus d'infos. Avec Ubuntu live, peux tu nous donner le retour de :
sudo apt install inxi -y && inxi -Fxz # specs de la machine
dmesg
sudo fdisk -l /dev/sda
sudo apt-get install --no-install-recommends smartmontools -y && sudo smartctl -s on -a /dev/sda
lsblk -o name,fstype,size,fsused,fsuse%,fsavail,label,mountpoint | grep -Ev "loop" # liste des partitionsDernière modification par LukePerp (Le 06/10/2020, à 10:36)
Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline
Hors ligne
#3 Le 06/10/2020, à 14:29
- bozoo24
Re : [Résolu par changement de disque] SSD en AHCI non reconnu
Bonjour et merci de ta reponse.
Voici les outputs que tu me demandes :
Inxi :
ubuntu@ubuntu:~$ inxi -Fxz
System: Host: ubuntu Kernel: 5.3.0-28-generic x86_64 bits: 64 gcc: 7.4.0
Desktop: Gnome 3.28.4 (Gtk 3.22.30-1ubuntu4)
Distro: Ubuntu 18.04.4 LTS
Machine: Device: laptop System: ASUSTeK product: UX430UA v: 1.0 serial: N/A
Mobo: ASUSTeK model: UX430UA v: 1.0 serial: N/A
UEFI [Legacy]: American Megatrends v: UX430UA.307 date: 04/17/2019
Battery BAT0: charge: 10.0 Wh 21.1% condition: 47.3/50.1 Wh (94%)
model: ASUSTeK ASUS status: Discharging
CPU: Dual core Intel Core i5-7200U (-MT-MCP-)
arch: Kaby Lake rev.9 cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10799
clock speeds: max: 3100 MHz 1: 1080 MHz 2: 2225 MHz 3: 2212 MHz
4: 2301 MHz
Graphics: Card: Intel HD Graphics 620 bus-ID: 00:02.0
Display Server: x11 (X.Org 1.20.5 )
drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1920x1080@60.01hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 620 (Kaby Lake GT2)
version: 4.5 Mesa 19.2.8 Direct Render: Yes
Audio: Card Intel Sunrise Point-LP HD Audio
driver: snd_hda_intel bus-ID: 00:1f.3
Sound: Advanced Linux Sound Architecture v: k5.3.0-28-generic
Network: Card: Intel Wireless 8260 driver: iwlwifi bus-ID: 02:00.0
IF: wlp2s0 state: down mac: <filter>
Drives: HDD Total Size: NA (-)
ID-1: USB /dev/sda model: DataTraveler_3.0 size: 15.5GB temp: 0C
Partition: ID-1: / size: 3.9G used: 722M (19%) fs: overlay dev: N/A
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 35.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 236 Uptime: 14 min Memory: 1149.3/7845.6MB
Init: systemd runlevel: 5 Gcc sys: N/A
Client: Shell (bash 4.4.201) inxi: 2.3.56 dmesg :
ubuntu@ubuntu:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xca, date = 2019-09-26
[ 0.000000] Linux version 5.3.0-28-generic (buildd@lcy01-amd64-009) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #30~18.04.1-Ubuntu SMP Fri Jan 17 06:14:09 UTC 2020 (Ubuntu 5.3.0-28.30~18.04.1-generic 5.3.13)
[ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009441afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009441b000-0x000000009441bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009441c000-0x000000009441cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009441d000-0x0000000099b2ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000099b30000-0x000000009a9abfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009a9ac000-0x000000009a9f1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009a9f2000-0x000000009ae0bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009ae0c000-0x000000009b37efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009b37f000-0x000000009b3fefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b3ff000-0x000000009fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX430UA/UX430UA, BIOS UX430UA.307 04/17/2019
[ 0.000000] tsc: Detected 2700.000 MHz processor
[ 0.000000] tsc: Detected 2699.909 MHz TSC
[ 0.000000] [Firmware Bug]: TSC ADJUST: CPU0: -1163353959 force to 0
[ 0.001989] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001990] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001997] last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[ 0.002001] MTRR default type: write-back
[ 0.002001] MTRR fixed ranges enabled:
[ 0.002003] 00000-9FFFF write-back
[ 0.002003] A0000-BFFFF uncachable
[ 0.002004] C0000-FFFFF write-protect
[ 0.002005] MTRR variable ranges enabled:
[ 0.002006] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.002007] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.002008] 2 base 009C000000 mask 7FFC000000 uncachable
[ 0.002009] 3 base 009B800000 mask 7FFF800000 uncachable
[ 0.002009] 4 disabled
[ 0.002010] 5 disabled
[ 0.002010] 6 disabled
[ 0.002011] 7 disabled
[ 0.002011] 8 disabled
[ 0.002011] 9 disabled
[ 0.002542] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002758] last_pfn = 0x9b3ff max_arch_pfn = 0x400000000
[ 0.011152] found SMP MP-table at [mem 0x000fcd20-0x000fcd2f]
[ 0.011232] check: Scanning 1 areas for low memory corruption
[ 0.011237] Using GB pages for direct mapping
[ 0.011239] BRK [0x152c01000, 0x152c01fff] PGTABLE
[ 0.011241] BRK [0x152c02000, 0x152c02fff] PGTABLE
[ 0.011241] BRK [0x152c03000, 0x152c03fff] PGTABLE
[ 0.011267] BRK [0x152c04000, 0x152c04fff] PGTABLE
[ 0.011268] BRK [0x152c05000, 0x152c05fff] PGTABLE
[ 0.011372] BRK [0x152c06000, 0x152c06fff] PGTABLE
[ 0.011403] BRK [0x152c07000, 0x152c07fff] PGTABLE
[ 0.011500] BRK [0x152c08000, 0x152c08fff] PGTABLE
[ 0.011546] BRK [0x152c09000, 0x152c09fff] PGTABLE
[ 0.011585] RAMDISK: [mem 0x7d60b000-0x7fffffff]
[ 0.011601] ACPI: Early table checksum verification disabled
[ 0.011604] ACPI: RSDP 0x00000000000F05B0 000024 (v02 _ASUS_)
[ 0.011607] ACPI: XSDT 0x000000009A9BA0A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011612] ACPI: FACP 0x000000009A9E58A8 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011617] ACPI: DSDT 0x000000009A9BA210 02B692 (v02 _ASUS_ Notebook 01072009 INTL 20160422)
[ 0.011620] ACPI: FACS 0x000000009ADDAF00 000040
[ 0.011623] ACPI: APIC 0x000000009A9E59C0 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011625] ACPI: FPDT 0x000000009A9E5A48 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011628] ACPI: FIDT 0x000000009A9E5A90 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011630] ACPI: ECDT 0x000000009A9E5B30 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.011633] ACPI: MCFG 0x000000009A9E5BF8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.011635] ACPI: SSDT 0x000000009A9E5C38 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.011638] ACPI: SSDT 0x000000009A9E5F98 006183 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.011640] ACPI: MSDM 0x000000009A9EC120 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.011643] ACPI: SSDT 0x000000009A9EC178 003147 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.011645] ACPI: HPET 0x000000009A9EF2C0 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.011648] ACPI: UEFI 0x000000009A9EF2F8 000042 (v01 _ASUS_ Notebook 00000002 01000013)
[ 0.011650] ACPI: SSDT 0x000000009A9EF340 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.011653] ACPI: LPIT 0x000000009A9F0220 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.011656] ACPI: SSDT 0x000000009A9F02B8 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.011658] ACPI: SSDT 0x000000009A9F0400 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.011661] ACPI: SSDT 0x000000009A9F06A0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.011663] ACPI: DBGP 0x000000009A9F0BB8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.011666] ACPI: DBG2 0x000000009A9F0BF0 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.011668] ACPI: DMAR 0x000000009A9F0C48 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.011671] ACPI: TPM2 0x000000009A9F0D38 000034 (v03 _ASUS_ Notebook 00000001 AMI 00000000)
[ 0.011673] ACPI: WSMT 0x000000009A9F0D70 000028 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.011682] ACPI: Local APIC address 0xfee00000
[ 0.011878] No NUMA configuration found
[ 0.011879] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[ 0.011889] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
[ 0.012081] Zone ranges:
[ 0.012082] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012083] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012084] Normal [mem 0x0000000100000000-0x000000025effffff]
[ 0.012085] Device empty
[ 0.012086] Movable zone start for each node
[ 0.012089] Early memory node ranges
[ 0.012089] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.012090] node 0: [mem 0x0000000000100000-0x000000009441afff]
[ 0.012091] node 0: [mem 0x000000009441d000-0x0000000099b2ffff]
[ 0.012092] node 0: [mem 0x000000009b37f000-0x000000009b3fefff]
[ 0.012092] node 0: [mem 0x0000000100000000-0x000000025effffff]
[ 0.012274] Zeroed struct page in unavailable ranges: 25783 pages
[ 0.012275] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[ 0.012277] On node 0 totalpages: 2067273
[ 0.012278] DMA zone: 64 pages used for memmap
[ 0.012278] DMA zone: 21 pages reserved
[ 0.012279] DMA zone: 3995 pages, LIFO batch:0
[ 0.012330] DMA32 zone: 9775 pages used for memmap
[ 0.012331] DMA32 zone: 625582 pages, LIFO batch:63
[ 0.022184] Normal zone: 22464 pages used for memmap
[ 0.022185] Normal zone: 1437696 pages, LIFO batch:63
[ 0.039055] Reserving Intel graphics memory at [mem 0x9c000000-0x9fffffff]
[ 0.039324] ACPI: PM-Timer IO Port: 0x1808
[ 0.039325] ACPI: Local APIC address 0xfee00000
[ 0.039331] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.039332] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.039333] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.039333] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.039366] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.039368] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.039369] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.039371] ACPI: IRQ0 used by override.
[ 0.039372] ACPI: IRQ9 used by override.
[ 0.039373] Using ACPI (MADT) for SMP configuration information
[ 0.039375] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.039378] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.039394] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.039395] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.039396] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.039396] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.039397] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.039398] PM: Registered nosave memory: [mem 0x9441b000-0x9441bfff]
[ 0.039399] PM: Registered nosave memory: [mem 0x9441c000-0x9441cfff]
[ 0.039400] PM: Registered nosave memory: [mem 0x99b30000-0x9a9abfff]
[ 0.039401] PM: Registered nosave memory: [mem 0x9a9ac000-0x9a9f1fff]
[ 0.039401] PM: Registered nosave memory: [mem 0x9a9f2000-0x9ae0bfff]
[ 0.039402] PM: Registered nosave memory: [mem 0x9ae0c000-0x9b37efff]
[ 0.039403] PM: Registered nosave memory: [mem 0x9b3ff000-0x9fffffff]
[ 0.039403] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[ 0.039404] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.039405] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.039405] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.039406] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.039406] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.039407] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.039407] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.039408] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[ 0.039408] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.039409] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.039409] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.039411] [mem 0xa0000000-0xefffffff] available for PCI devices
[ 0.039411] Booting paravirtualized kernel on bare hardware
[ 0.039414] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.039419] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.039576] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.039582] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.039583] pcpu-alloc: [0] 0 1 2 3
[ 0.039607] Built 1 zonelists, mobility grouping on. Total pages: 2034949
[ 0.039607] Policy zone: Normal
[ 0.039608] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity
[ 0.040186] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.040407] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.040456] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.044005] Calgary: detecting Calgary via BIOS EBDA area
[ 0.044006] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.063956] Memory: 7982656K/8269092K available (14339K kernel code, 2370K rwdata, 4668K rodata, 2660K init, 5076K bss, 286436K reserved, 0K cma-reserved)
[ 0.064084] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.064094] Kernel/User page tables isolation: enabled
[ 0.064108] ftrace: allocating 42927 entries in 168 pages
[ 0.080894] rcu: Hierarchical RCU implementation.
[ 0.080895] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.080896] Tasks RCU enabled.
[ 0.080897] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.080898] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.084085] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.084454] random: crng done (trusting CPU's manufacturer)
[ 0.088246] Console: colour VGA+ 80x25
[ 0.088250] printk: console [tty0] enabled
[ 0.088265] ACPI: Core revision 20190703
[ 0.088572] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.088648] APIC: Switch to symmetric I/O mode setup
[ 0.088649] DMAR: Host address width 39
[ 0.088651] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.088656] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.088658] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.088661] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.088662] DMAR: RMRR base: 0x0000009a13c000 end: 0x0000009a15bfff
[ 0.088663] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009fffffff
[ 0.088664] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.088665] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.088666] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.088667] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.088668] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.090292] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.090293] x2apic enabled
[ 0.090306] Switched APIC routing to cluster x2apic.
[ 0.094342] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.112726] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
[ 0.112731] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=10799636)
[ 0.112733] pid_max: default: 32768 minimum: 301
[ 0.112765] LSM: Security Framework initializing
[ 0.112774] Yama: becoming mindful.
[ 0.112802] AppArmor: AppArmor initialized
[ 0.112849] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.112864] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.113022] *** VALIDATE proc ***
[ 0.113064] *** VALIDATE cgroup1 ***
[ 0.113065] *** VALIDATE cgroup2 ***
[ 0.113122] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.113140] process: using mwait in idle threads
[ 0.113142] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.113143] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.113145] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.113147] Spectre V2 : Mitigation: Full generic retpoline
[ 0.113147] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.113148] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.113149] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.113150] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.113151] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.113153] MDS: Mitigation: Clear CPU buffers
[ 0.113409] Freeing SMP alternatives memory: 40K
[ 0.116754] TSC deadline timer enabled
[ 0.116758] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.116855] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.116861] ... version: 4
[ 0.116861] ... bit width: 48
[ 0.116862] ... generic registers: 4
[ 0.116862] ... value mask: 0000ffffffffffff
[ 0.116863] ... max period: 00007fffffffffff
[ 0.116863] ... fixed-purpose events: 3
[ 0.116864] ... event mask: 000000070000000f
[ 0.116904] rcu: Hierarchical SRCU implementation.
[ 0.117853] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.117905] smp: Bringing up secondary CPUs ...
[ 0.117989] x86: Booting SMP configuration:
[ 0.117991] .... node #0, CPUs: #1
[ 0.008328] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
[ 0.120547] #2
[ 0.120852] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.120852] #3
[ 0.121242] smp: Brought up 1 node, 4 CPUs
[ 0.121242] smpboot: Max logical packages: 1
[ 0.121242] smpboot: Total of 4 processors activated (21599.27 BogoMIPS)
[ 0.122398] devtmpfs: initialized
[ 0.122398] x86/mm: Memory block size: 128MB
[ 0.122398] PM: Registering ACPI NVS region [mem 0x9441b000-0x9441bfff] (4096 bytes)
[ 0.122398] PM: Registering ACPI NVS region [mem 0x9a9f2000-0x9ae0bfff] (4300800 bytes)
[ 0.122398] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.122398] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.122398] pinctrl core: initialized pinctrl subsystem
[ 0.122398] PM: RTC time: 11:54:58, date: 2020-10-06
[ 0.122398] NET: Registered protocol family 16
[ 0.122398] audit: initializing netlink subsys (disabled)
[ 0.122398] audit: type=2000 audit(1601985297.032:1): state=initialized audit_enabled=0 res=1
[ 0.124763] EISA bus registered
[ 0.124770] cpuidle: using governor ladder
[ 0.124773] cpuidle: using governor menu
[ 0.124808] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.124808] ACPI: bus type PCI registered
[ 0.124808] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.124824] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.124826] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.124835] PCI: Using configuration type 1 for base access
[ 0.125187] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.126016] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.126016] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.128816] ACPI: Added _OSI(Module Device)
[ 0.128817] ACPI: Added _OSI(Processor Device)
[ 0.128818] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128818] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.128820] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.128820] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.128821] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.179820] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.182040] ACPI: EC: EC started
[ 0.182040] ACPI: EC: interrupt blocked
[ 0.184612] ACPI: \: Used as first EC
[ 0.184614] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.184614] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.192984] ACPI: Dynamic OEM Table Load:
[ 0.192990] ACPI: SSDT 0xFFFF9B6D95816800 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.195048] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.197026] ACPI: Dynamic OEM Table Load:
[ 0.197030] ACPI: SSDT 0xFFFF9B6D94CB6000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.198974] ACPI: Dynamic OEM Table Load:
[ 0.198978] ACPI: SSDT 0xFFFF9B6D94F2DC00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.200748] ACPI: Dynamic OEM Table Load:
[ 0.200751] ACPI: SSDT 0xFFFF9B6D94F2C600 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.202984] ACPI: Dynamic OEM Table Load:
[ 0.202990] ACPI: SSDT 0xFFFF9B6D94F80800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.205310] ACPI: Dynamic OEM Table Load:
[ 0.205314] ACPI: SSDT 0xFFFF9B6D94F2D600 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.207214] ACPI: Dynamic OEM Table Load:
[ 0.207218] ACPI: SSDT 0xFFFF9B6D94F2D400 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.211277] ACPI: Interpreter enabled
[ 0.211325] ACPI: (supports S0 S3 S4 S5)
[ 0.211326] ACPI: Using IOAPIC for interrupt routing
[ 0.211372] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.212853] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.218331] ACPI: Power Resource [WRST] (on)
[ 0.218543] ACPI: Power Resource [WRST] (on)
[ 0.218754] ACPI: Power Resource [WRST] (on)
[ 0.218961] ACPI: Power Resource [WRST] (on)
[ 0.219169] ACPI: Power Resource [WRST] (on)
[ 0.219389] ACPI: Power Resource [WRST] (on)
[ 0.219597] ACPI: Power Resource [WRST] (on)
[ 0.219803] ACPI: Power Resource [WRST] (on)
[ 0.220010] ACPI: Power Resource [WRST] (on)
[ 0.220219] ACPI: Power Resource [WRST] (on)
[ 0.221135] ACPI: Power Resource [WRST] (on)
[ 0.221347] ACPI: Power Resource [WRST] (on)
[ 0.221556] ACPI: Power Resource [WRST] (on)
[ 0.221765] ACPI: Power Resource [WRST] (on)
[ 0.221972] ACPI: Power Resource [WRST] (on)
[ 0.222183] ACPI: Power Resource [WRST] (on)
[ 0.222391] ACPI: Power Resource [WRST] (on)
[ 0.222872] ACPI: Power Resource [WRST] (on)
[ 0.223085] ACPI: Power Resource [WRST] (on)
[ 0.223293] ACPI: Power Resource [WRST] (on)
[ 0.240741] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.240747] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.242965] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.242966] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.244095] PCI host bridge to bus 0000:00
[ 0.244097] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.244098] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.244099] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.244100] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window]
[ 0.244101] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.244102] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.244114] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.244562] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.244575] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
[ 0.244581] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.244586] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.244788] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.244803] pci 0000:00:04.0: reg 0x10: [mem 0xef120000-0xef127fff 64bit]
[ 0.245083] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.245107] pci 0000:00:14.0: reg 0x10: [mem 0xef110000-0xef11ffff 64bit]
[ 0.245186] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.245479] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.245503] pci 0000:00:14.2: reg 0x10: [mem 0xef138000-0xef138fff 64bit]
[ 0.245817] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.246081] pci 0000:00:15.0: reg 0x10: [mem 0xef137000-0xef137fff 64bit]
[ 0.247198] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.247463] pci 0000:00:15.1: reg 0x10: [mem 0xef136000-0xef136fff 64bit]
[ 0.248513] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.248542] pci 0000:00:16.0: reg 0x10: [mem 0xef135000-0xef135fff 64bit]
[ 0.248627] pci 0000:00:16.0: PME# supported from D3hot
[ 0.248891] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.248912] pci 0000:00:17.0: reg 0x10: [mem 0xef130000-0xef131fff]
[ 0.248920] pci 0000:00:17.0: reg 0x14: [mem 0xef134000-0xef1340ff]
[ 0.248928] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.248936] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.248944] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.248953] pci 0000:00:17.0: reg 0x24: [mem 0xef133000-0xef1337ff]
[ 0.249003] pci 0000:00:17.0: PME# supported from D3hot
[ 0.249216] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.249417] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.249675] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.249784] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.250049] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 0.250357] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.250374] pci 0000:00:1f.2: reg 0x10: [mem 0xef12c000-0xef12ffff]
[ 0.250619] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.250650] pci 0000:00:1f.3: reg 0x10: [mem 0xef128000-0xef12bfff 64bit]
[ 0.250686] pci 0000:00:1f.3: reg 0x20: [mem 0xef100000-0xef10ffff 64bit]
[ 0.250745] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.251070] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.251131] pci 0000:00:1f.4: reg 0x10: [mem 0xef132000-0xef1320ff 64bit]
[ 0.251202] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.251527] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.251940] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 0.252042] pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit]
[ 0.252622] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.253399] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.253403] pci 0000:00:1c.5: bridge window [mem 0xef000000-0xef0fffff]
[ 0.256452] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.256539] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.256622] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.256705] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.256794] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.256878] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.256960] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.257044] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.257767] ACPI: EC: interrupt unblocked
[ 0.257767] ACPI: EC: event unblocked
[ 0.257767] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.257767] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.257770] SCSI subsystem initialized
[ 0.257770] libata version 3.00 loaded.
[ 0.257770] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.257770] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.257770] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.257770] vgaarb: loaded
[ 0.257770] ACPI: bus type USB registered
[ 0.257770] usbcore: registered new interface driver usbfs
[ 0.257770] usbcore: registered new interface driver hub
[ 0.257770] usbcore: registered new device driver usb
[ 0.257770] pps_core: LinuxPPS API ver. 1 registered
[ 0.257770] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.257770] PTP clock support registered
[ 0.257770] EDAC MC: Ver: 3.0.0
[ 0.257770] PCI: Using ACPI for IRQ routing
[ 0.272760] PCI: pci_cache_line_size set to 64 bytes
[ 0.273408] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.273409] e820: reserve RAM buffer [mem 0x9441b000-0x97ffffff]
[ 0.273410] e820: reserve RAM buffer [mem 0x99b30000-0x9bffffff]
[ 0.273411] e820: reserve RAM buffer [mem 0x9b3ff000-0x9bffffff]
[ 0.273412] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[ 0.273507] NetLabel: Initializing
[ 0.273508] NetLabel: domain hash size = 128
[ 0.273508] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.273521] NetLabel: unlabeled traffic allowed by default
[ 0.273534] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.273534] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.276746] clocksource: Switched to clocksource tsc-early
[ 0.288210] VFS: Disk quotas dquot_6.6.0
[ 0.288223] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.288251] *** VALIDATE hugetlbfs ***
[ 0.288330] AppArmor: AppArmor Filesystem Enabled
[ 0.288358] pnp: PnP ACPI init
[ 0.288706] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.288707] system 00:00: [io 0xffff] has been reserved
[ 0.288709] system 00:00: [io 0xffff] has been reserved
[ 0.288710] system 00:00: [io 0xffff] has been reserved
[ 0.288711] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.288712] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.288716] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288842] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.288884] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.288887] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.289085] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.289390] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.289391] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.289392] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.289393] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.289394] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.289396] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.289397] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.289398] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.289399] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.289401] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.289404] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289449] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.289451] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.289452] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.289453] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.289454] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.289455] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.289456] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.289459] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289835] system 00:06: [io 0xff00-0xfffe] has been reserved
[ 0.289838] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291421] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.291422] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.291423] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.291424] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.291425] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.291428] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292898] pnp: PnP ACPI: found 8 devices
[ 0.294176] thermal_sys: Registered thermal governor 'fair_share'
[ 0.294176] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.294177] thermal_sys: Registered thermal governor 'step_wise'
[ 0.294178] thermal_sys: Registered thermal governor 'user_space'
[ 0.294178] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.298677] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.298709] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.298711] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.298712] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.298718] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0000000-0xa01fffff]
[ 0.298722] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0200000-0xa03fffff 64bit pref]
[ 0.298724] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.298727] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.298736] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.298740] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa01fffff]
[ 0.298743] pci 0000:00:1c.0: bridge window [mem 0xa0200000-0xa03fffff 64bit pref]
[ 0.298748] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.298753] pci 0000:00:1c.5: bridge window [mem 0xef000000-0xef0fffff]
[ 0.298760] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.298761] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.298762] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.298763] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xefffffff window]
[ 0.298764] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.298765] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.298766] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa01fffff]
[ 0.298767] pci_bus 0000:01: resource 2 [mem 0xa0200000-0xa03fffff 64bit pref]
[ 0.298768] pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff]
[ 0.298973] NET: Registered protocol family 2
[ 0.299092] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.299132] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.299260] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.299335] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.299367] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.299393] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.299474] NET: Registered protocol family 1
[ 0.299479] NET: Registered protocol family 44
[ 0.299492] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.300140] PCI: CLS 64 bytes, default 64
[ 0.300185] Trying to unpack rootfs image as initramfs...
[ 8.248797] Freeing initrd memory: 42964K
[ 8.248880] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.0
[ 8.248883] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.1
[ 8.268799] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 8.268800] software IO TLB: mapped [mem 0x95b30000-0x99b30000] (64MB)
[ 8.269015] check: Scanning for low memory corruption every 60 seconds
[ 8.270371] Initialise system trusted keyrings
[ 8.270379] Key type blacklist registered
[ 8.270405] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 8.271660] zbud: loaded
[ 8.272004] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.272142] fuse: init (API version 7.31)
[ 8.272236] Platform Keyring initialized
[ 8.276523] Key type asymmetric registered
[ 8.276524] Asymmetric key parser 'x509' registered
[ 8.276532] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 8.276568] io scheduler mq-deadline registered
[ 8.276961] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ 8.277000] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 8.277339] pcieport 0000:00:1c.5: PME: Signaling with IRQ 123
[ 8.277404] pcieport 0000:00:1c.5: AER: enabled with IRQ 123
[ 8.277483] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.277542] intel_idle: MWAIT substates: 0x11142120
[ 8.277543] intel_idle: v0.4.1 model 0x8E
[ 8.277756] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 8.277976] ACPI: AC Adapter [AC0] (off-line)
[ 8.278049] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:01/PNP0C0D:00/input/input0
[ 8.278055] ACPI: Lid Switch [LID]
[ 8.278104] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 8.278110] ACPI: Sleep Button [SLPB]
[ 8.278134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 8.278138] ACPI: Power Button [PWRB]
[ 8.278162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.278173] ACPI: Power Button [PWRF]
[ 8.279612] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.279613] ACPI: Thermal Zone [THRM] (37 C)
[ 8.279748] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 8.282291] Linux agpgart interface v0.103
[ 8.288581] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 8.300558] loop: module loaded
[ 8.300760] libphy: Fixed MDIO Bus: probed
[ 8.300761] tun: Universal TUN/TAP device driver, 1.6
[ 8.300790] PPP generic driver version 2.4.2
[ 8.300833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.300835] ehci-pci: EHCI PCI platform driver
[ 8.300847] ehci-platform: EHCI generic platform driver
[ 8.300858] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.300860] ohci-pci: OHCI PCI platform driver
[ 8.300868] ohci-platform: OHCI generic platform driver
[ 8.300874] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.301175] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 8.301180] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 8.302267] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 8.302272] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 8.302456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 8.302457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.302458] usb usb1: Product: xHCI Host Controller
[ 8.302459] usb usb1: Manufacturer: Linux 5.3.0-28-generic xhci-hcd
[ 8.302460] usb usb1: SerialNumber: 0000:00:14.0
[ 8.302546] hub 1-0:1.0: USB hub found
[ 8.302566] hub 1-0:1.0: 12 ports detected
[ 8.303547] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 8.303549] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 8.303552] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 8.303589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 8.303590] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.303591] usb usb2: Product: xHCI Host Controller
[ 8.303592] usb usb2: Manufacturer: Linux 5.3.0-28-generic xhci-hcd
[ 8.303593] usb usb2: SerialNumber: 0000:00:14.0
[ 8.303672] hub 2-0:1.0: USB hub found
[ 8.303688] hub 2-0:1.0: 6 ports detected
[ 8.304415] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 8.304416] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 8.305697] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.305776] mousedev: PS/2 mouse device common for all mice
[ 8.305942] rtc_cmos 00:01: RTC can wake from S4
[ 8.306395] rtc_cmos 00:01: registered as rtc0
[ 8.306409] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 8.306415] i2c /dev entries driver
[ 8.306453] device-mapper: uevent: version 1.0.3
[ 8.306508] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 8.306526] platform eisa.0: Probing EISA bus 0
[ 8.306527] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 8.306529] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 8.306530] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 8.306531] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 8.306531] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 8.306532] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 8.306533] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 8.306534] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 8.306535] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 8.306536] platform eisa.0: EISA: Detected 0 cards
[ 8.306539] intel_pstate: Intel P-state driver initializing
[ 8.307067] intel_pstate: HWP enabled
[ 8.307143] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.307182] intel_pmc_core INT33A1:00: initialized
[ 8.307373] NET: Registered protocol family 10
[ 8.311654] Segment Routing with IPv6
[ 8.311672] NET: Registered protocol family 17
[ 8.311766] Key type dns_resolver registered
[ 8.312081] RAS: Correctable Errors collector initialized.
[ 8.312113] microcode: sig=0x806e9, pf=0x80, revision=0xca
[ 8.312144] microcode: Microcode Update Driver: v2.2.
[ 8.312153] sched_clock: Marking stable (8307813468, 4328490)->(8312719391, -577433)
[ 8.312250] registered taskstats version 1
[ 8.312257] Loading compiled-in X.509 certificates
[ 8.313443] Loaded X.509 cert 'Build time autogenerated kernel key: c209d4e4513ddb6584e17c46859deb0bc3f91652'
[ 8.313466] zswap: loaded using pool lzo/zbud
[ 8.317584] Key type big_key registered
[ 8.317589] Key type trusted registered
[ 8.319571] Key type encrypted registered
[ 8.319574] AppArmor: AppArmor sha1 policy hashing enabled
[ 8.319584] ima: Allocated hash algorithm: sha1
[ 8.344741] No architecture policies found
[ 8.344748] evm: Initialising EVM extended attributes:
[ 8.344748] evm: security.selinux
[ 8.344749] evm: security.SMACK64
[ 8.344749] evm: security.SMACK64EXEC
[ 8.344750] evm: security.SMACK64TRANSMUTE
[ 8.344750] evm: security.SMACK64MMAP
[ 8.344750] evm: security.apparmor
[ 8.344751] evm: security.ima
[ 8.344751] evm: security.capability
[ 8.344751] evm: HMAC attrs: 0x1
[ 8.345489] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 8.345869] PM: Magic number: 8:531:933
[ 8.346073] rtc_cmos 00:01: setting system clock to 2020-10-06T11:55:06 UTC (1601985306)
[ 8.347042] Freeing unused decrypted memory: 2040K
[ 8.347396] Freeing unused kernel image memory: 2660K
[ 8.352819] Write protecting the kernel read-only data: 22528k
[ 8.353280] Freeing unused kernel image memory: 2008K
[ 8.353527] Freeing unused kernel image memory: 1476K
[ 8.360927] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 8.360929] x86/mm: Checking user space page tables
[ 8.368150] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 8.368152] Run /init as init process
[ 8.446957] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.451821] ahci 0000:00:17.0: version 3.0
[ 8.452120] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode
[ 8.452123] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 8.455941] scsi host0: ahci
[ 8.456151] scsi host1: ahci
[ 8.457402] scsi host2: ahci
[ 8.457451] ata1: DUMMY
[ 8.457452] ata2: DUMMY
[ 8.457459] ata3: SATA max UDMA/133 abar m2048@0xef133000 port 0xef133200 irq 125
[ 8.520131] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 8.522703] Console: switching to colour dummy device 80x25
[ 8.524107] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.524107] [drm] Driver supports precise vblank timestamp query.
[ 8.524573] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.525109] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 8.539210] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 8.541844] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.543816] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 8.640776] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 8.742333] fbcon: i915drmfb (fb0) is primary device
[ 8.754828] Console: switching to colour frame buffer device 240x67
[ 8.772052] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8.775429] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 8.790773] usb 1-2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10
[ 8.790774] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.790775] usb 1-2: Product: DataTraveler 3.0
[ 8.790776] usb 1-2: Manufacturer: Kingston
[ 8.790776] usb 1-2: SerialNumber: 60A44CB46458E380373CCF23
[ 8.793998] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 8.794154] scsi host3: usb-storage 1-2:1.0
[ 8.794225] usbcore: registered new interface driver usb-storage
[ 8.795110] usbcore: registered new interface driver uas
[ 8.916808] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 9.099979] usb 1-6: New USB device found, idVendor=0bda, idProduct=58e4, bcdDevice= 0.01
[ 9.099981] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 9.099982] usb 1-6: Product: USB2.0 HD UVC WebCam
[ 9.099983] usb 1-6: Manufacturer: 04081-0009800017071003794
[ 9.099983] usb 1-6: SerialNumber: 200901010001
[ 9.228923] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 9.272930] tsc: Refined TSC clocksource calibration: 2711.984 MHz
[ 9.272937] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27177742b69, max_idle_ns: 440795326182 ns
[ 9.272975] clocksource: Switched to clocksource tsc
[ 9.378389] usb 1-8: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[ 9.378391] usb 1-8: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[ 9.378393] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[ 9.378394] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.504921] usb 1-9: new full-speed USB device number 5 using xhci_hcd
[ 9.656112] usb 1-9: New USB device found, idVendor=04f3, idProduct=0903, bcdDevice= 1.35
[ 9.656113] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.656115] usb 1-9: Product: ELAN:Fingerprint
[ 9.656115] usb 1-9: Manufacturer: ELAN
[ 9.817871] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 9.818071] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 9.818299] sd 3:0:0:0: [sda] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 9.818664] sd 3:0:0:0: [sda] Write Protect is off
[ 9.818666] sd 3:0:0:0: [sda] Mode Sense: 45 00 00 00
[ 9.818903] sd 3:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9.916255] sda: sda1 sda2
[ 9.919138] sd 3:0:0:0: [sda] Attached SCSI removable disk
[ 13.880926] ata3.00: qc timeout (cmd 0xec)
[ 13.882066] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 14.192930] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 24.376925] ata3.00: qc timeout (cmd 0xec)
[ 24.378152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 24.378158] ata3: limiting SATA link speed to 3.0 Gbps
[ 24.688929] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 54.328920] ata3.00: qc timeout (cmd 0xef)
[ 54.331364] ata3.00: failed to enable AA (error_mask=0x4)
[ 54.644926] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 55.493439] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 55.495135] ISO 9660 Extensions: RRIP_1991A
[ 59.083232] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 59.101027] systemd[1]: Detected architecture x86-64.
[ 59.102778] systemd[1]: Set hostname to <ubuntu>.
[ 59.102934] systemd[1]: Initializing machine ID from random generator.
[ 59.202042] systemd[1]: Unnecessary job for /dev/loop0 was removed.
[ 59.202203] systemd[1]: Reached target User and Group Name Lookups.
[ 59.202255] systemd[1]: Reached target Remote File Systems.
[ 59.202440] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 59.202578] systemd[1]: Created slice User and Session Slice.
[ 59.202586] systemd[1]: Reached target Swap.
[ 59.312995] systemd-journald[998]: Received request to flush runtime journal from PID 1
[ 59.320304] lp: driver loaded but no devices found
[ 59.328268] ppdev: user-space parallel port driver
[ 59.493688] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input6
[ 59.586009] intel_rapl_common: Found RAPL domain package
[ 59.586011] intel_rapl_common: Found RAPL domain dram
[ 59.588879] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 59.668562] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 59.676967] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 59.690373] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 59.718931] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 59.719315] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 59.743645] Bluetooth: Core ver 2.22
[ 59.743664] NET: Registered protocol family 31
[ 59.743665] Bluetooth: HCI device and connection manager initialized
[ 59.743668] Bluetooth: HCI socket layer initialized
[ 59.743670] Bluetooth: L2CAP socket layer initialized
[ 59.743673] Bluetooth: SCO socket layer initialized
[ 59.750556] i2c_hid i2c-ELAN1300:00: i2c-ELAN1300:00 supply vdd not found, using dummy regulator
[ 59.750570] i2c_hid i2c-ELAN1300:00: i2c-ELAN1300:00 supply vddl not found, using dummy regulator
[ 59.775065] mc: Linux media interface: v0.10
[ 59.778084] asus_wmi: ASUS WMI generic driver loaded
[ 59.786875] asus_wmi: Initialization: 0x1
[ 59.787126] asus_wmi: BIOS WMI version: 9.0
[ 59.787325] asus_wmi: SFUN value: 0x2021
[ 59.787329] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 59.787331] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 59.792956] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
[ 59.800227] asus_wmi: Number of fans: 0
[ 59.804004] videodev: Linux video capture interface: v2.00
[ 59.839444] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 59.839446] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 59.839446] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 59.839447] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 59.839447] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 59.839448] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 59.839638] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 59.846979] usbcore: registered new interface driver btusb
[ 59.852216] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 59.852301] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 59.859233] Bluetooth: hci0: Device revision is 5
[ 59.859235] Bluetooth: hci0: Secure boot is enabled
[ 59.859235] Bluetooth: hci0: OTP lock is enabled
[ 59.859236] Bluetooth: hci0: API lock is enabled
[ 59.859237] Bluetooth: hci0: Debug lock is disabled
[ 59.859238] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 59.877044] cryptd: max_cpu_qlen set to 1000
[ 59.901055] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 59.908682] Intel(R) Wireless WiFi driver for Linux
[ 59.908683] Copyright(c) 2003- 2015 Intel Corporation
[ 59.919615] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (0bda:58e4)
[ 59.924541] AVX2 version of gcm_enc/dec engaged.
[ 59.924542] AES CTR mode by8 optimization enabled
[ 59.927092] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 59.927094] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 59.927096] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[ 59.927097] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 59.927156] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input8
[ 59.927215] usbcore: registered new interface driver uvcvideo
[ 59.927215] USB Video Class driver (1.1.1)
[ 59.973875] iwlwifi 0000:02:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
[ 59.991761] intel_rapl_common: Found RAPL domain package
[ 59.991763] intel_rapl_common: Found RAPL domain core
[ 59.991764] intel_rapl_common: Found RAPL domain uncore
[ 59.991765] intel_rapl_common: Found RAPL domain dram
[ 60.070506] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[ 60.102414] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 60.152850] iwlwifi 0000:02:00.0: base HW address: 28:16:ad:4b:f1:81
[ 60.226506] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 60.227530] thermal thermal_zone5: failed to read out thermal zone (-61)
[ 60.259645] input: ELAN1300:00 04F3:3059 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1300:00/0018:04F3:3059.0001/input/input9
[ 60.259781] input: ELAN1300:00 04F3:3059 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1300:00/0018:04F3:3059.0001/input/input10
[ 60.259892] hid-generic 0018:04F3:3059.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3059] on i2c-ELAN1300:00
[ 60.296240] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 60.366497] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 60.395097] input: ELAN1300:00 04F3:3059 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1300:00/0018:04F3:3059.0001/input/input12
[ 60.395232] hid-multitouch 0018:04F3:3059.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3059] on i2c-ELAN1300:00
[ 60.594141] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 60.594143] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 60.594144] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 60.594144] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 60.594145] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 60.594146] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 60.594147] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 60.701888] input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 60.701948] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 60.701987] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 60.702018] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 60.702048] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 60.702077] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 60.702112] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 60.785370] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 60.785371] Bluetooth: BNEP filters: protocol multicast
[ 60.785375] Bluetooth: BNEP socket layer initialized
[ 61.433965] Bluetooth: hci0: Waiting for firmware download to complete
[ 61.434211] Bluetooth: hci0: Firmware loaded in 1547655 usecs
[ 61.434241] Bluetooth: hci0: Waiting for device to boot
[ 61.445204] Bluetooth: hci0: Device booted in 10718 usecs
[ 61.449205] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 61.453312] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 61.953566] audit: type=1400 audit(1601985360.102:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1451 comm="apparmor_parser"
[ 61.953719] audit: type=1400 audit(1601985360.102:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1451 comm="apparmor_parser"
[ 65.532790] Bluetooth: RFCOMM TTY layer initialized
[ 65.532795] Bluetooth: RFCOMM socket layer initialized
[ 65.532799] Bluetooth: RFCOMM ver 1.11
[ 80.358427] audit: type=1400 audit(1601985378.506:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine" pid=4078 comm="apparmor_parser"
[ 80.358524] audit: type=1400 audit(1601985378.506:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4078 comm="apparmor_parser"
[ 80.385220] audit: type=1400 audit(1601985378.534:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.core" pid=4080 comm="apparmor_parser"
[ 80.419399] audit: type=1400 audit(1601985378.566:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.core.hook.configure" pid=4081 comm="apparmor_parser"
[ 84.538909] rfkill: input handler disabled
[ 103.017280] audit: type=1400 audit(1601985401.166:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine" pid=4598 comm="apparmor_parser"
[ 103.036826] audit: type=1400 audit(1601985401.186:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4598 comm="apparmor_parser"
[ 103.054430] audit: type=1400 audit(1601985401.202:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.core" pid=4601 comm="apparmor_parser"
[ 103.107859] audit: type=1400 audit(1601985401.254:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=4602 comm="apparmor_parser"
[ 107.458574] audit: type=1400 audit(1601985405.606:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=4940 comm="apparmor_parser"
[ 107.469251] audit: type=1400 audit(1601985405.618:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=4941 comm="apparmor_parser"
[ 108.312613] audit: type=1400 audit(1601985406.458:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=4953 comm="apparmor_parser"
[ 108.687869] audit: type=1400 audit(1601985406.834:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=4952 comm="apparmor_parser"
[ 108.692936] audit: type=1400 audit(1601985406.842:16): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine" pid=4963 comm="apparmor_parser"
[ 108.692940] audit: type=1400 audit(1601985406.842:17): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4963 comm="apparmor_parser"
[ 108.696873] audit: type=1400 audit(1601985406.846:18): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=4965 comm="apparmor_parser"
[ 108.698117] audit: type=1400 audit(1601985406.846:19): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=4966 comm="apparmor_parser"
[ 109.357140] audit: type=1400 audit(1601985407.506:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.gnome-characters" pid=5078 comm="apparmor_parser"
[ 109.459366] audit: type=1400 audit(1601985407.606:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=5079 comm="apparmor_parser"
[ 110.502626] audit: type=1400 audit(1601985408.650:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=5154 comm="apparmor_parser"
[ 110.547575] audit: type=1400 audit(1601985408.694:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=5155 comm="apparmor_parser"
[ 113.810543] kauditd_printk_skb: 14 callbacks suppressed
[ 113.810544] audit: type=1400 audit(1601985411.958:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=5473 comm="apparmor_parser"
[ 113.936811] audit: type=1400 audit(1601985412.086:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=5474 comm="apparmor_parser"
[ 113.942011] audit: type=1400 audit(1601985412.090:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine" pid=5476 comm="apparmor_parser"
[ 113.942015] audit: type=1400 audit(1601985412.090:41): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8268/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5476 comm="apparmor_parser"
[ 113.945461] audit: type=1400 audit(1601985412.094:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=5478 comm="apparmor_parser"
[ 113.946194] audit: type=1400 audit(1601985412.094:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5479 comm="apparmor_parser"
[ 115.472757] raid6: avx2x4 gen() 29165 MB/s
[ 115.520758] raid6: avx2x4 xor() 17499 MB/s
[ 115.568761] raid6: avx2x2 gen() 23546 MB/s
[ 115.616768] raid6: avx2x2 xor() 15749 MB/s
[ 115.664733] raid6: avx2x1 gen() 20338 MB/s
[ 115.712765] raid6: avx2x1 xor() 14714 MB/s
[ 115.760730] raid6: sse2x4 gen() 12081 MB/s
[ 115.808760] raid6: sse2x4 xor() 7618 MB/s
[ 115.856761] raid6: sse2x2 gen() 10390 MB/s
[ 115.904768] raid6: sse2x2 xor() 6960 MB/s
[ 115.952757] raid6: sse2x1 gen() 9072 MB/s
[ 116.000763] raid6: sse2x1 xor() 5299 MB/s
[ 116.000764] raid6: using algorithm avx2x4 gen() 29165 MB/s
[ 116.000764] raid6: .... xor() 17499 MB/s, rmw enabled
[ 116.000765] raid6: using avx2x2 recovery algorithm
[ 116.009230] xor: automatically using best checksumming function avx
[ 116.041109] Btrfs loaded, crc32c=crc32c-intel
[ 116.100842] JFS: nTxBlock = 8192, nTxLock = 65536
[ 116.156209] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 215.257305] input: 94:65:2D:9C:89:A7 as /devices/virtual/input/input20sudo fdisk -l /dev/sda (qui correspond a le cle USB sur laquelle je boot puisque fdisk ne voit que la cle et pas le SSD)
sudo fdisk -l /dev/sda
Disk /dev/sda: 14.4 GiB, 15502147584 bytes, 30277632 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6e037a9d
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 0 4153407 4153408 2G 0 Empty
/dev/sda2 12012 16939 4928 2.4M ef EFI (FAT-12/16/32)smartctl (toujours sur la cle sur laquelle je boot, et qui ne semble pas renvoyer grand chose...) :
sudo smartctl -s on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sda: Unknown USB bridge [0x0951:0x1666 (0x110)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summarylsblk avec les quelques colonnes en moins par rapport a ce que tu voulais, certaines n'etaient pas reconnues...
lsblk -o name,fstype,size,label,mountpoint | grep -Ev "loop"
NAME FSTYPE SIZE LABEL MOUNTPOINT
sda iso9660 14.4G Ubuntu 18.04.4 LTS amd64 /cdrom
├─sda1 iso9660 2G Ubuntu 18.04.4 LTS amd64
└─sda2 vfat 2.4M Ubuntu 18.04.4 LTS amd64 Voila, ca fait un sacre morceau...
Merci d'avance et bon apres-midi !
Hors ligne
#4 Le 06/10/2020, à 18:09
- LukePerp
Re : [Résolu par changement de disque] SSD en AHCI non reconnu
C'est mal barré en effet, on ne voit pas le disque. Montres voir :
sudo fdisk -lJe crois qu'il est mentionné en erreur dans dmesg :
[ 13.882066] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 14.192930] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 24.376925] ata3.00: qc timeout (cmd 0xec)
[ 24.378152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 24.378158] ata3: limiting SATA link speed to 3.0 Gbps
[ 24.688929] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 54.328920] ata3.00: qc timeout (cmd 0xef)
[ 54.331364] ata3.00: failed to enable AA (error_mask=0x4)
[ 54.644926] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320)Pour info, j'ai déjà eu deux cas où les machines ne voulaient pas du SSD en mode AHCI. Il fallait choisir le mode IDE pour démarrer Ubuntu. Sur un SSD, je pense que la perte de performance avec le mode IDE, au lieu d'AHCI, est totalement négligeable.
Dernière modification par LukePerp (Le 06/10/2020, à 18:14)
Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline
Hors ligne
#5 Le 07/10/2020, à 00:20
- bozoo24
Re : [Résolu par changement de disque] SSD en AHCI non reconnu
Oui, je pense que c'est mal parti...
Voici l'output de sudo fdisk -l
Il me semble que seule l'USB sur laquelle je boot est reconnue...
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/loop0: 1.9 GiB, 2029981696 bytes, 3964808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 89.1 MiB, 93417472 bytes, 182456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 54.7 MiB, 57294848 bytes, 111904 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 44.9 MiB, 47063040 bytes, 91920 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 160.2 MiB, 167931904 bytes, 327992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 4.2 MiB, 4403200 bytes, 8600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 956 KiB, 978944 bytes, 1912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 14.4 GiB, 15502147584 bytes, 30277632 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6e037a9d
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 0 4153407 4153408 2G 0 Empty
/dev/sda2 12012 16939 4928 2.4M ef EFI (FAT-12/16/32)
Disk /dev/loop8: 3.7 MiB, 3825664 bytes, 7472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytesPar rapport au dmesg, j'ai aussi remarque que ce message s'affiche au demarrage
[ 54.331364] ata3.00: failed to enable AA (error_mask=0x4)Ca ne me derangerait pas de passer en mode IDE, quitte a perdre de la performance. En revanche, ce BIOS ne me propose que le mode AHCI...
Merci pour ta reponse et bonne nuit !
Hors ligne
#6 Le 07/10/2020, à 07:43
- LukePerp
Re : [Résolu par changement de disque] SSD en AHCI non reconnu
C'est étonnant que le bios ne propose que ahci. Pourrais-tu nous prendre une photo du bios montrant :
- le disque détecté
- l'option ahci
Je te propose d'ouvrir le pc et d'inspecter la connexion du disque et ses connecteurs. Si tu as un autre disque de côté, remplace le pour comparer et reviens nous dire. Aussi, tu peux aussi sortir le disque fantôme et le connecter à une autre machine, avec un câble adaptateur usb pour le diagnostiquer.
Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline
Hors ligne
#7 Le 07/10/2020, à 14:06
- bozoo24
Re : [Résolu par changement de disque] SSD en AHCI non reconnu
Bonjour !
Voici une photo du BIOS
Je n'ai pas de tournevis sous la main en ce moment. J'essaierai ca ce wekend.
Merci et bon apres-midi !
Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre ou TDCT'Pix le permettent).
Dernière modification par bozoo24 (Le 07/10/2020, à 14:53)
Hors ligne
#8 Le 07/10/2020, à 19:46
- LukePerp
Re : [Résolu par changement de disque] SSD en AHCI non reconnu
Ok j'attendrai avec impatience la suite car c'est vraiment intriguant !
Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline
Hors ligne
#9 Le 19/10/2020, à 12:23
- bozoo24
Re : [Résolu par changement de disque] SSD en AHCI non reconnu
Bonjour,
Du coup j'ai ouvert le PC et échangé le SSD avec un autre que j'avais.
Celui-là était bien reconnu par Linux, j'ai donc racheté un SSD et fait le changement.
Tout fonctionne parfaitement maintenant.
Visiblement le SSD était HS, mais quand même vu par le BIOS...
Merci pour ton aide en tout cas,
Bonne journée
Hors ligne