#27 Le 23/02/2021, à 12:22
- geole
Re : RESOLU_Ordre de démarrage dual-boot
Ton installation n'est pas classique
1) De façon façon implicite, le boot se fait certainement en EFI
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.
UBUNTU est bien installé en EFI
nvme0n1p5 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
Donc il boote à partir d'une partition de boot EFI
nvme0n1p1: _____________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi
/efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg
MAIS, ton logiciel mint n'a pas été installé en EFI.
nvme0n1p4 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
Il a été installé en LEGACY et boote donc à partir du MBR
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/nvme0n1 and looks at sector
1050624 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt4)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk
---------------------------------------------------------------------------
et il se sert bien d'une partition spéciale de boot que tu n'as donc pas besoin de créer!
nvme0n1p2: _____________________________________________________________________
File system:
Boot sector type: Grub2's core.img
Boot sector info:
parted -lm (filtered): _________________________________________________________
nvme0n1:500GB:nvme:512:512:gpt:Samsung SSD 970 EVO 500GB:;
2:538MB:539MB:1049kB:::;
En fait, il faudrait
SOIT que tu bootes en modifiant le bios pour avoir le mode LEGACY par defaut
SOIT que tu installes la couche EFI qui manque dans mint
Je pense que la seconde solution est plus à la mode.
Essaies la commande proposée par boot-repair lorsque tu es dans mint
sudo apt install grub-efi-amd64-signed
Lorsque mint aura migré en EFI, tu pourras alors supprimer la partition nvme0n1p2
NOTA. Cette partition ne te sert à rien. Elle peut être supprimée
nvme0n1p3: _____________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
Dernière modification par geole (Le 23/02/2021, à 12:25)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#28 Le 23/02/2021, à 15:37
- walker
Re : RESOLU_Ordre de démarrage dual-boot
J'ai fait
sudo apt install grub-efi-amd64-signed
et j'ai supprimé nvme0n1p2. Au redémarrage rien n'a changé, du moins apparemment.
Le boot-info, montre que rien n'a changé par rapport au précédent sinon que nvme0n1p2 n'est plus là.
Bon j'arrête là les frais, et je vais faire ce que je t'annonçais dans le post #21: je vire Xubuntu du ssd et je l'installe sur une vm.
Merci encore pour ton aide.
LinuxMint 20.1
MSI X470 Gaming Plus MAX / Ryzen 3 3100 / SSD Samsung EVO 970 / HDD 1To /RAM Corsair Vengeance 2*8 Go
Hors ligne
#29 Le 23/02/2021, à 15:45
- jvcharles
Re : RESOLU_Ordre de démarrage dual-boot
Debian Stable Sid/rc-buggy - Gnome/Kde Tails LiveUsbPersistance UBports/Ubuntu-Touch 2022/08/19 (Pixel 3a)
Windows 10/Facebook supprimer 2019/02/02 Compte Google supprimé 2023/02/15
Hors ligne
#30 Le 23/02/2021, à 15:57
- geole
Re : RESOLU_Ordre de démarrage dual-boot
Le boot-info, montre que rien n'a changé par rapport au précédent
J'aurais aimé pouvoir le consulter.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#31 Le 23/02/2021, à 18:17
- walker
Re : RESOLU_Ordre de démarrage dual-boot
boot-info-4ppa125 [20210223_1814]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/nvme0n1 and looks at sector
1050624 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt4)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk
---------------------------------------------------------------------------
nvme0n1p1: _____________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi
/efi/ubuntu/grubx64.efi /efi/ubuntu/mmx64.efi
/efi/ubuntu/shimx64.efi /efi/ubuntu/grub.cfg
nvme0n1p3: _____________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
nvme0n1p4: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 20.1
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
nvme0n1p5: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
================================ 2 OS detected =================================
OS#1: L'OS actuellement utilisé - Linux Mint 20.1 CurrentSession on nvme0n1p4
OS#2: Ubuntu 20.04.2 LTS on nvme0n1p5
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-65-generic root=UUID=e374bb5f-2e15-4f99-a7b6-09ac89de3fe0 ro quiet splash
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 0000
Timeout: 1 seconds
BootOrder: 0000,0002,0001
Boot0000* ubuntu HD(1,GPT,ce156db2-86fe-4582-a2fa-0712168afcea,0x800,0x100000)/File(\EFI\UBUNTU\SHIMX64.EFI)
Boot0001* Hard Drive BBS(HD,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0200)..GO..NO..........S.a.m.s.u.n.g. .S.S.D. .9.7.0. .E.V.O. .5.0.0.G.B...................\.,.@.r.d.=.X..........A...........................%8Z.D.......4..Gd-.;.A..MQ..L.S.5.H.7.N.S.0.N.A.8.1.7.2.7.N........BO
Boot0002* USB CD BBS(CDROM,,0x0)/VenHw(5ce8128b-2cec-40f0-8372-80640e3dc858,0a00)..GO..NO........}.A.S.U.S. .S.D.R.W.-.0.8.D.2.S.-.U. .B.9.0.1...................\.,.@.r.d.=.X..........A.............................4..Gd-.;.A..MQ..L.6.0. .4.3.7.6.0.3.5.0.1.0.8.6........BO
2895d47544fd587b26c7e29be1295c27 nvme0n1p1/BOOT/fbx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84 nvme0n1p1/BOOT/mmx64.efi
637fa7fabc8a2f70312edf2f15e275ff nvme0n1p1/ubuntu/grubx64.efi
dc3c47be2f78a78e5e57d097ae6c5c84 nvme0n1p1/ubuntu/mmx64.efi
78415fb8fb9b909f8029858113f1335f nvme0n1p1/ubuntu/shimx64.efi
78415fb8fb9b909f8029858113f1335f nvme0n1p1/BOOT/BOOTX64.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
nvme0n1 : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
nvme0n1p4 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
nvme0n1p1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
nvme0n1p3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
nvme0n1p5 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
Partitions info (2/3): _________________________________________________________
nvme0n1p4 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p5 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
nvme0n1p4 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
nvme0n1p1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
nvme0n1p3 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
nvme0n1p5 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 30692AE3-3AEC-419E-B0C5-C266DB4B4D9C
Start End Sectors Size Type
nvme0n1p1 2048 1050623 1048576 512M EFI System
nvme0n1p3 1052672 2103295 1050624 513M Microsoft basic data
nvme0n1p4 2103296 505124983 503021688 239.9G Linux filesystem
nvme0n1p5 505126912 976771071 471644160 224.9G Linux filesystem
parted -lm (filtered): _________________________________________________________
nvme0n1:500GB:nvme:512:512:gpt:Samsung SSD 970 EVO 500GB:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
3:539MB:1077MB:538MB:fat32::msftdata;
4:1077MB:259GB:258GB:ext4::;
5:259GB:500GB:241GB:ext4::;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
nvme0n1
├─nvme0n1p1 vfat 1CAC-C881 ce156db2-86fe-4582-a2fa-0712168afcea EFI System Partition
├─nvme0n1p3 vfat 2940-4D32 ec8d516c-4ccf-4735-a74b-44979e6dbe4b
├─nvme0n1p4 ext4 e374bb5f-2e15-4f99-a7b6-09ac89de3fe0 0756dc1d-90f8-4abd-b8fc-91f13cb16226
└─nvme0n1p5 ext4 b5d23b96-a6d4-482f-a33f-beff5b7309f5 328a2a2a-6736-49ea-a193-29e64342e255
df (filtered): _________________________________________________________________
Avail Use% Mounted on
nvme0n1p1 503.2M 2% /mnt/boot-sav/nvme0n1p1
nvme0n1p3 512M 0% /mnt/boot-sav/nvme0n1p3
nvme0n1p4 104.5G 50% /
nvme0n1p5 93.4G 53% /mnt/boot-sav/nvme0n1p5
Mount options: __________________________________________________________________
nvme0n1p1 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
nvme0n1p3 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
nvme0n1p4 rw,relatime,errors=remount-ro
nvme0n1p5 rw,relatime
=================== nvme0n1p1/efi/ubuntu/grub.cfg (filtered) ===================
search.fs_uuid b5d23b96-a6d4-482f-a33f-beff5b7309f5 root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
=================== nvme0n1p4/boot/grub/grub.cfg (filtered) ====================
Linux Mint 20.1 Cinnamon e374bb5f-2e15-4f99-a7b6-09ac89de3fe0
Linux Mint 20.1 Cinnamon, avec Linux 5.4.0-65-generic e374bb5f-2e15-4f99-a7b6-09ac89de3fe0
Linux Mint 20.1 Cinnamon, avec Linux 5.4.0-58-generic e374bb5f-2e15-4f99-a7b6-09ac89de3fe0
Ubuntu 20.04.2 LTS (20.04) (sur nvme0n1p5) b5d23b96-a6d4-482f-a33f-beff5b7309f5
Ubuntu (sur nvme0n1p5) b5d23b96-a6d4-482f-a33f-beff5b7309f5
Ubuntu, avec Linux 5.8.0-43-generic (sur nvme0n1p5) b5d23b96-a6d4-482f-a33f-beff5b7309f5
Ubuntu, avec Linux 5.8.0-41-generic (sur nvme0n1p5) b5d23b96-a6d4-482f-a33f-beff5b7309f5
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
======================== nvme0n1p4/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p4 during installation
UUID=e374bb5f-2e15-4f99-a7b6-09ac89de3fe0 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p3 during installation
UUID=2940-4D32 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
==================== nvme0n1p4/etc/default/grub (filtered) =====================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
================= nvme0n1p4: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
118.377658844 = 127.107043328 boot/grub/grub.cfg 1
99.331924438 = 106.656841728 boot/grub/i386-pc/core.img 1
14.552875519 = 15.626031104 boot/vmlinuz 1
5.396621704 = 5.794578432 boot/vmlinuz-5.4.0-58-generic 1
14.552875519 = 15.626031104 boot/vmlinuz-5.4.0-65-generic 1
5.396621704 = 5.794578432 boot/vmlinuz.old 1
104.808528900 = 112.537300992 boot/initrd.img 8
80.932613373 = 86.900731904 boot/initrd.img-5.4.0-58-generic 5
104.808528900 = 112.537300992 boot/initrd.img-5.4.0-65-generic 8
80.932613373 = 86.900731904 boot/initrd.img.old 5
=================== nvme0n1p4: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 17622 nov. 13 00:15 10_linux
-rwxr-xr-x 1 root root 42359 nov. 13 00:15 10_linux_zfs
-rwxr-xr-x 1 root root 12894 nov. 13 00:15 20_linux_xen
-rwxr-xr-x 1 root root 12059 nov. 13 00:15 30_os-prober
-rwxr-xr-x 1 root root 1424 nov. 13 00:15 30_uefi-firmware
-rwxr-xr-x 1 root root 214 nov. 13 00:15 40_custom
-rwxr-xr-x 1 root root 216 nov. 13 00:15 41_custom
=================== nvme0n1p5/boot/grub/grub.cfg (filtered) ====================
Ubuntu b5d23b96-a6d4-482f-a33f-beff5b7309f5
Ubuntu, avec Linux 5.8.0-43-generic b5d23b96-a6d4-482f-a33f-beff5b7309f5
Ubuntu, avec Linux 5.8.0-41-generic b5d23b96-a6d4-482f-a33f-beff5b7309f5
Linux Mint 20.1 Ulyssa (20.1) (sur nvme0n1p4) e374bb5f-2e15-4f99-a7b6-09ac89de3fe0
Linux Mint 20.1 Cinnamon (sur nvme0n1p4) e374bb5f-2e15-4f99-a7b6-09ac89de3fe0
Linux Mint 20.1 Cinnamon, avec Linux 5.4.0-65-generic (sur nvme0n1p4) e374bb5f-2e15-4f99-a7b6-09ac89de3fe0
Linux Mint 20.1 Cinnamon, avec Linux 5.4.0-58-generic (sur nvme0n1p4) e374bb5f-2e15-4f99-a7b6-09ac89de3fe0
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
======================== nvme0n1p5/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p5 during installation
UUID=b5d23b96-a6d4-482f-a33f-beff5b7309f5 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=1CAC-C881 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
==================== nvme0n1p5/etc/default/grub (filtered) =====================
GRUB_DEFAULT=1
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
================= nvme0n1p5: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
418.621200562 = 449.491091456 boot/grub/grub.cfg 2
281.216079712 = 301.953466368 boot/vmlinuz 1
244.848892212 = 262.904496128 boot/vmlinuz-5.8.0-41-generic 1
281.216079712 = 301.953466368 boot/vmlinuz-5.8.0-43-generic 1
244.848892212 = 262.904496128 boot/vmlinuz.old 1
418.124343872 = 448.957595648 boot/initrd.img 2
246.423458099 = 264.595173376 boot/initrd.img-5.8.0-41-generic 2
418.124343872 = 448.957595648 boot/initrd.img-5.8.0-43-generic 2
246.423458099 = 264.595173376 boot/initrd.img.old 2
=================== nvme0n1p5: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 17622 janv. 13 15:12 10_linux
-rwxr-xr-x 1 root root 42359 janv. 13 15:12 10_linux_zfs
-rwxr-xr-x 1 root root 12894 janv. 13 15:12 20_linux_xen
-rwxr-xr-x 1 root root 12059 janv. 13 15:12 30_os-prober
-rwxr-xr-x 1 root root 1424 janv. 13 15:12 30_uefi-firmware
-rwxr-xr-x 1 root root 214 janv. 13 15:12 40_custom
-rwxr-xr-x 1 root root 216 janv. 13 15:12 41_custom
=============================== StdErr Messages ================================
File descriptor 63 (pipe:[98492]) leaked on lvs invocation. Parent PID 16254: /bin/bash
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of
nvme0n1p4,
using the following options: nvme0n1p1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Linux Mint 20.1 CurrentSession entry (nvme0n1p1/efi/****/shim****.efi (**** will be updated in the final message) file) !
LinuxMint 20.1
MSI X470 Gaming Plus MAX / Ryzen 3 3100 / SSD Samsung EVO 970 / HDD 1To /RAM Corsair Vengeance 2*8 Go
Hors ligne
#32 Le 23/02/2021, à 18:26
- geole
Re : RESOLU_Ordre de démarrage dual-boot
Une réparation standard de boot-repair va suffire
MAIS il il faut faire cela avec un support d'installation https://doc.ubuntu-fr.org/boot-repair
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of
nvme0n1p4,
using the following options: nvme0n1p1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
nvme0n1p4: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 20.1
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
Dernière modification par geole (Le 23/02/2021, à 18:29)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#33 Le 23/02/2021, à 18:27
- bluc
Re : RESOLU_Ordre de démarrage dual-boot
Bonjour,
Perso j'utilise cette méthode du grub mémorisé qui lance toujours le dernier système utilisé et si on change ce sera ensuite toujours le même, jusqu'au prochain changement
En modifiant le fichier : /etc/default/grub. Il suffit de modifier la ligne
GRUB_DEFAULT=saved
et ajouter celle ci
GRUB_SAVEDEFAULT=true
Puis
sudo update-grub
Dernière modification par bluc (Le 23/02/2021, à 18:28)
Clevo : Ubuntu 23.10 ❖ Xubuntu 22.10 ❖ Kubuntu 23.10
avec partition data commune Une fraction de seconde Multiboot
Hors ligne
#34 Le 23/02/2021, à 19:28
- walker
Re : RESOLU_Ordre de démarrage dual-boot
Une réparation standard de boot-repair va suffire
Effectivement, ça a suffi: l'écran porte bien maintenant LinuxMint en début de liste .
Je vais pouvoir enfin mettre résolu à ce fil.
Merci geole et merci bluc, je garde ta méthode perso en réserve ça pourra peut-être servir ...
LinuxMint 20.1
MSI X470 Gaming Plus MAX / Ryzen 3 3100 / SSD Samsung EVO 970 / HDD 1To /RAM Corsair Vengeance 2*8 Go
Hors ligne