Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 12/02/2021, à 19:04

JeanLuc51

Installation double boot sur DELL Inspiron 7490

Bonjour,
J’ai acheté un DELL Inspiron 7490, pensant que DELL accepterai facilement l’installation de Ubuntu à coté de Windows. Ne pouvant pas désactiver la fonction RAID, je n’ai pas pu installer UBUNTU simplement.
J’ai utilisé la méthode du post de « evroza »sur le site communauté DELL :

https://www.dell.com/community/Linux-Ge … 147/page/5

Tout fonctionne avec le noyau 5.6.0.7, bien que le démarrage avec SuperGrub soit quelque peu fastidieux. Pour avoir un fonctionne correct j’ai bloqué comme préconisé le noyau à la version 5.6.0.7.
Le post de dépannage datant du mois de mai 2020 il semble que la version du noyau est maintenant de 5.8.0-43.
Ma question : Est-ce que ce noyau prend maintenant en compte le bios RAID du DELL Inspiron 7490 ?

Merci d’avance pour toutes les réponses.

Amicales salutations smile


Modération : merci de respecter les règles du forum : les doublons sont interdits. L'autre sujet est supprimé.

Dernière modification par cqfd93 (Le 13/02/2021, à 13:16)

Hors ligne

#2 Le 12/02/2021, à 20:47

lucmars

Re : Installation double boot sur DELL Inspiron 7490

Sauf erreur, non !

Comprends que c'est pas du Raid pour faire de la redondance de données, mais une astuce pour que le veau d'or "démarre" plus vite.


Gaulois Matter !

Hors ligne

#3 Le 13/02/2021, à 13:19

geole

Re : Installation double boot sur DELL Inspiron 7490

Bonjour
Serait-il possible de faire un boot-info, afin de voir à quoi cela ressemble https://doc.ubuntu-fr.org/tutoriel/boot-info
et de poster l'URL qui sera générée

Il y a un bios assez récent. As-tu pensé à le mettre a jour? https://www.dell.com/support/home/fr-fr … op/drivers
https://dl.dell.com/FOLDER06913771M/1/D … _1.6.0.exe

Dernière modification par geole (Le 13/02/2021, à 13:45)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#4 Le 14/02/2021, à 20:09

JeanLuc51

Re : Installation double boot sur DELL Inspiron 7490

Merci de la réponse, je viens de mettre à jour le bios, mais priori il n'y a pas de modification pour le type de disque.
J'ai effectuer le boot-info, ci après L’URL du rapport: https://paste2.org/
Merci pour votre aide.

Hors ligne

#5 Le 14/02/2021, à 20:24

geole

Re : Installation double boot sur DELL Inspiron 7490

Bonjour

As-tu pensé à vérifier le lien que tu indiques? (il manque la fin)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#6 Le 15/02/2021, à 12:21

JeanLuc51

Re : Installation double boot sur DELL Inspiron 7490

Bonjour,
Désolé il semble que Boot-Info me transmettre que ce lien quand je choisis URL, j'ai donc choisi la sortie fichier texte.
Le lien pour télécharger : http://ovh.to/fHqk44V
Espérant que ce fichier vous apporte les informations attendues.
Merci pour ton aide. smile

Hors ligne

#7 Le 15/02/2021, à 13:24

geole

Re : Installation double boot sur DELL Inspiron 7490

Bonjour
Dans ce cas, il eut  été plus simple d'en faire un copier/coller directement dans la discussion.
Chose rectifiée

boot-info-4ppa125                                              [20210215_0957]

============================== Boot Info Summary ===============================

 => libparted MBR boot code is installed in the MBR of /dev/mmcblk0.
 => No boot loader is installed in the MBR of /dev/nvme0n1.

mmcblk0p1: _____________________________________________________________________

    File system:       ntfs
    Boot sector type:  Unknown
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

nvme0n1p1: _____________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /efi/Dell/SOS/bootmgfw.efi /efi/Dell/SOS/bootmgr.efi 
                       /efi/Dell/SOS/bootx64.efi /efi/Dell/SOS/memtest.efi 
                       /efi/Microsoft/Boot/bootmgfw.efi 
                       /efi/Microsoft/Boot/bootmgr.efi 
                       /efi/Microsoft/Boot/memtest.efi /bootmgr

nvme0n1p2: _____________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 

nvme0n1p3: _____________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 8 or 10
    Boot files:        /Windows/System32/winload.exe

nvme0n1p4: _____________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

nvme0n1p5: _____________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

nvme0n1p6: _____________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

nvme0n1p7: _____________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

nvme0n1p8: _____________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Pop!_OS 20.04 LTS
    Boot files:        /etc/fstab /etc/default/grub


================================ 2 OS detected =================================

OS#1:   L'OS actuellement utilisé - Pop!_OS 20.04 LTS CurrentSession on nvme0n1p8
OS#2:   Windows 8 or 10 on nvme0n1p3

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.6.0-7-generic root=UUID=edadacf5-cd58-44a3-b6ee-0f76f60bd84e ro


===================================== UEFI =====================================

BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.

efibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0005,0003,0004,0001,0000
Boot0000* UEFI Hard Drive	PciRoot(0x0)/Pci(0x17,0x0)/Sata(512,32768,0)/HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)N.....YM....R,Y.
Boot0001  ubuntu	HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\custom\shimx64.efi)
Boot0002* SuperGrub	PciRoot(0x0)/Pci(0x17,0x0)/Sata(512,32768,0)/HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\Boot\super_grub2_disk_standalone_x86_64_efi_2.04s1.EFI)
Boot0003  Windows Boot Manager	HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0004  custom	HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\custom\shimx64.efi)
Boot0005  ubuntu	HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\custom\shimx64.efi)

4f0248591a11d5432380ba65f683879b   nvme0n1p1/Dell/SOS/bootmgfw.efi
1feb5f9427494e6f598603caa3af7d99   nvme0n1p1/Dell/SOS/bootmgr.efi
4f0248591a11d5432380ba65f683879b   nvme0n1p1/Dell/SOS/bootx64.efi
3c080490d0eb8fdb738f298c3e44b3e0   nvme0n1p1/Microsoft/Boot/bootmgfw.efi
da7c9088c9d0bff4ac469abdfc8f540e   nvme0n1p1/Microsoft/Boot/bootmgr.efi
e8f7873d16849c7257b3ea2da04f152f   nvme0n1p1/Boot/super_grub2_disk_standalone_x86_64_efi_2.04s1.efi


============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

nvme0n1	: is-GPT,	no-BIOSboot,	has---ESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
mmcblk0	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	mmc-disk, no-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

nvme0n1p8	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
nvme0n1p1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
nvme0n1p3	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
nvme0n1p4	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
nvme0n1p5	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
nvme0n1p6	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
mmcblk0p1	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios

Partitions info (2/3): _________________________________________________________

nvme0n1p8	: isnotESP,	fstab-has-bad-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
nvme0n1p1	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	bootmgr,	notwinboot
nvme0n1p3	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot
nvme0n1p4	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
nvme0n1p5	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
nvme0n1p6	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot
mmcblk0p1	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

nvme0n1p8	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	nvme0n1
nvme0n1p1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	nvme0n1
nvme0n1p3	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	nvme0n1
nvme0n1p4	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	nvme0n1
nvme0n1p5	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	nvme0n1
nvme0n1p6	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	nvme0n1
mmcblk0p1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	mmcblk0

fdisk -l (filtered): ___________________________________________________________

Disk nvme0n1: 238.49 GiB, 256060514304 bytes, 500118192 sectors
Disk identifier: 50D042C1-8629-425B-AD35-16B2739DE355
              Start       End   Sectors   Size Type
nvme0n1p1      2048    391167    389120   190M EFI System
nvme0n1p2    391168    653311    262144   128M Microsoft reserved
nvme0n1p3    653312 217944063 217290752 103.6G Microsoft basic data
nvme0n1p4 463220736 465248255   2027520   990M Windows recovery environment
nvme0n1p5 465248256 497176575  31928320  15.2G Windows recovery environment
nvme0n1p6 497178624 500084735   2906112   1.4G Windows recovery environment
nvme0n1p7 217944064 233568255  15624192   7.5G Linux swap
nvme0n1p8 233568256 463220735 229652480 109.5G Linux filesystem
Partition table entries are not in disk order.
Disk mmcblk0: 183.35 GiB, 196865949696 bytes, 384503808 sectors
Disk identifier: 0x509ba4f6
          Boot Start       End   Sectors   Size Id Type
mmcblk0p1       2048 384503807 384501760 183.4G  7 HPFS/NTFS/exFAT

parted -lm (filtered): _________________________________________________________

nvme0n1:256GB:nvme:512:512:gpt:BC511 NVMe SK hynix 256GB:;
1:1049kB:200MB:199MB:fat32:EFI system partition:boot, esp;
2:200MB:334MB:134MB::Microsoft reserved partition:msftres;
3:334MB:112GB:111GB:ntfs:Basic data partition:msftdata;
7:112GB:120GB:8000MB:linux-swap(v1)::swap;
8:120GB:237GB:118GB:ext4::;
4:237GB:238GB:1038MB:ntfs::diag;
5:238GB:255GB:16.3GB:ntfs::hidden, diag;
6:255GB:256GB:1488MB:ntfs::hidden, diag;
mmcblk0:197GB:sd/mmc:512:512:msdos:SD SC200:;
1:1049kB:197GB:197GB:ntfs::;

blkid (filtered): ______________________________________________________________

NAME        FSTYPE   UUID                                 PARTUUID                             LABEL       PARTLABEL
mmcblk0                                                                                                    
└─mmcblk0p1 ntfs     326FFFF11D2EAC2B                     509ba4f6-01                                      
nvme0n1                                                                                                    
├─nvme0n1p1 vfat     B0AB-3221                            9f7f1cb4-25e5-43d2-bedc-6239572621a4 ESP         EFI system partition
├─nvme0n1p2                                               28b3c0ae-040a-4a74-8807-118e1dd8b709             Microsoft reserved partition
├─nvme0n1p3 ntfs     A42E49522E491EA4                     d454baea-666a-4694-91be-3e1f0ec31c28 OS          Basic data partition
├─nvme0n1p4 ntfs     EE94C6D394C69D89                     e09ed980-1cd4-4d61-9e9f-5db0741ca167 WINRETOOLS  
├─nvme0n1p5 ntfs     B04E93094E92C78C                     4459d86b-20be-4339-badc-966f3a3fdc47 Image       
├─nvme0n1p6 ntfs     38B8BFE7B8BFA234                     30d2daf3-20ed-4e36-9ba7-1d2b252cb339 DELLSUPPORT 
├─nvme0n1p7 swap     727510f7-e4e8-4627-bdd4-26b48c1e5f50 469a3e6b-7ee0-40b7-817c-57861dfcd573             
└─nvme0n1p8 ext4     edadacf5-cd58-44a3-b6ee-0f76f60bd84e 060d04f3-815d-486c-846b-01fadad4a037             

df (filtered): _________________________________________________________________

                   Avail Use% Mounted on
mmcblk0p1          53.9G  71% /home/Partage
nvme0n1p1          95.3M  49% /mnt/boot-sav/nvme0n1p1
nvme0n1p3          60.9G  41% /mnt/boot-sav/nvme0n1p3
nvme0n1p4         129.1M  87% /mnt/boot-sav/nvme0n1p4
nvme0n1p5           6.9G  55% /mnt/boot-sav/nvme0n1p5
nvme0n1p6         493.8M  65% /mnt/boot-sav/nvme0n1p6
nvme0n1p8          89.9G  11% /

Mount options: __________________________________________________________________

mmcblk0p1         rw,nosuid,nodev,noexec,noatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
nvme0n1p1         rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
nvme0n1p3         ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
nvme0n1p4         ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
nvme0n1p5         ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
nvme0n1p6         ro,relatime,user_id=0,group_id=0,allow_other,blksize=4096
nvme0n1p8         rw,relatime,errors=remount-ro

======================== nvme0n1p8/etc/fstab (filtered) ========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/nvme0n1p8 during installation
UUID=edadacf5-cd58-44a3-b6ee-0f76f60bd84e / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p1 during installation
PARTUUID=9f7f1cb4-25e5-43d2-bedc-6239572621a4 /boot/efi vfat umask=0077 0 1
# swap was on /dev/nvme0n1p7 during installation
UUID=727510f7-e4e8-4627-bdd4-26b48c1e5f50 none swap sw 0 0
UUID=326FFFF11D2EAC2B /home/Partage               ntfs rw,umask=002,suid,uid=1000,gid=1001,dev,noexec,noauto,user,async,noatime,x-gvfs-show,x-gvfs-name=Partage

==================== nvme0n1p8/etc/default/grub (filtered) =====================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="Custom Live CD"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

================= nvme0n1p8: Location of files loaded by Grub ==================

           GiB - GB             File                                 Fragment(s)
 115,096675873 = 123,584114688  boot/vmlinuz                                   2
 116,072586060 = 124,631990272  boot/vmlinuz-5.6.0-7-generic                   1
 115,096675873 = 123,584114688  boot/vmlinuz-5.8.0-43-generic                  2
 116,072586060 = 124,631990272  boot/vmlinuz.old                               1
 118,744998932 = 127,501471744  boot/initrd.img                                3
 118,740440369 = 127,496577024  boot/initrd.img-5.6.0-7-generic                4
 118,744998932 = 127,501471744  boot/initrd.img-5.8.0-43-generic               3
 118,740440369 = 127,496577024  boot/initrd.img.old                            4

=================== nvme0n1p8: ls -l /etc/grub.d/ (filtered) ===================

-rwxr-xr-x 1 root root 17622 nov.  13 00:15 10_linux
-rwxr-xr-x 1 root root 42359 nov.  13 00:15 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on mmcblk0p1

00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  10 00 04 00 00 08 00 00  |................|
00000020  00 00 00 00 80 00 80 00  ff 07 eb 16 00 00 00 00  |................|
00000030  04 00 00 00 00 00 00 00  7f b0 6e 01 00 00 00 00  |..........n.....|
00000040  f6 00 00 00 01 00 00 00  2b ac 2e 1d f1 ff 6f 32  |........+.....o2|
00000050  00 00 00 00 0e 1f be 71  7c ac 22 c0 74 0b 56 b4  |.......q|.".t.V.|
00000060  0e bb 07 00 cd 10 5e eb  f0 32 e4 cd 16 cd 19 eb  |......^..2......|
00000070  fe 54 68 69 73 20 69 73  20 6e 6f 74 20 61 20 62  |.This is not a b|
00000080  6f 6f 74 61 62 6c 65 20  64 69 73 6b 2e 20 50 6c  |ootable disk. Pl|
00000090  65 61 73 65 20 69 6e 73  65 72 74 20 61 20 62 6f  |ease insert a bo|
000000a0  6f 74 61 62 6c 65 20 66  6c 6f 70 70 79 20 61 6e  |otable floppy an|
000000b0  64 0d 0a 70 72 65 73 73  20 61 6e 79 20 6b 65 79  |d..press any key|
000000c0  20 74 6f 20 74 72 79 20  61 67 61 69 6e 20 2e 2e  | to try again ..|
000000d0  2e 20 0d 0a 00 00 00 00  00 00 00 00 00 00 00 00  |. ..............|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages ================================

File descriptor 63 (pipe:[125881]) leaked on lvs invocation. Parent PID 23693: /bin/bash
mdadm: No arrays found in config file or automatically

Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of
nvme0n1p8,
using the following options:        nvme0n1p1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix use-standard-efi-file    

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Pop!_OS 20.04 LTS CurrentSession entry (nvme0n1p1/efi/****/shim****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.

If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\shim****.efi (**** will be updated in the final message)

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#8 Le 15/02/2021, à 14:29

geole

Re : Installation double boot sur DELL Inspiron 7490

JeanLuc51 a écrit :

Bonjour,
J’ai acheté un DELL Inspiron 7490,......, bien que le démarrage avec SuperGrub soit quelque peu fastidieux.

J'ai un peu regardé le boot-info

================================ 2 OS detected =================================
OS#1:   L'OS actuellement utilisé - Pop!_OS 20.04 LTS CurrentSession on nvme0n1p8
OS#2:   Windows 8 or 10 on nvme0n1p3.

fibootmgr -v
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0005,0003,0004,0001,0000
Boot0000* UEFI Hard Drive	PciRoot(0x0)/Pci(0x17,0x0)/Sata(512,32768,0)/HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)N.....YM....R,Y.
Boot0001  ubuntu	HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\custom\shimx64.efi)
Boot0002* SuperGrub	PciRoot(0x0)/Pci(0x17,0x0)/Sata(512,32768,0)/HD(1,GPT,9f7f1cb4-25e5-43d2-bedc-6239572621a4,0x800,0x5f000)/File(\EFI\Boot\super_grub2_disk_standalone_x86_64_efi_2.04s1.EFI)

SecureBoot disabled.

================= nvme0n1p8: Location of files loaded by Grub ==================
           GiB - GB             File                                 Fragment(s)
 115,096675873 = 123,584114688  boot/vmlinuz                                   2
 116,072586060 = 124,631990272  boot/vmlinuz-5.6.0-7-generic                   1
 115,096675873 = 123,584114688  boot/vmlinuz-5.8.0-43-generic                  2
 118,744998932 = 127,501471744  boot/initrd.img                                3
 118,740440369 = 127,496577024  boot/initrd.img-5.6.0-7-generic                4
 118,744998932 = 127,501471744  boot/initrd.img-5.8.0-43-generic               3

Je serais tenté de te proposer d'installer refind. Il me semble assez pratique.
Comme la vision de ton NVME  ne montre pas de présence de RAIDS, je  pense qu'il saura  te proposer le dual-boot.

Tu pourrais essayer de l'installer https://doc.ubuntu-fr.org/refind

sudo apt install refind

Quelle  version de ubuntu as-tu tenté d'installer?


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#9 Le 18/02/2021, à 17:52

JeanLuc51

Re : Installation double boot sur DELL Inspiron 7490

Bonjour,

Merci Geole  pour l'aide, j'ai installé "Refind", ça fonctionne comme SupeGrub mais avec un interface plus sympathique. Pour l'immédiat je dois réinstaller Ubuntu 20 dernière version avec le noyau 5.8.
Ça va me  prendre un peu de temps car il faut que je sauvegarde le home pour mes données.
Je fait cela dans le WE.
Amicales salutations  smile

Hors ligne

#10 Le 18/02/2021, à 18:54

geole

Re : Installation double boot sur DELL Inspiron 7490

Bonjour.
Je ne savais pas très bien si refind pouvait  lire des NVME...
Si tu réinstalles, pense à l'idée de fabriquer une partition de données
Soit  en fabricant une partition  EXT4 soit en utilisant cette partition

nvme0n1p3    653312 217944063 217290752 103.6G Microsoft basic data

http://mezigoo.free.fr/ps/index.html

Afin de ne pas installer le shim  qui ne fonctionne pas si j'ai bien compris, tu pourrais lancer une installation en ligne de commande

sudo ubiquity -b

Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#11 Le 23/02/2021, à 17:10

JeanLuc51

Re : Installation double boot sur DELL Inspiron 7490

Bonjour,
Merci pour toutes les marches à suivre, mais je pense que ce sera plus compliqué que je pensais.
J'ai crée un clé bootable Ubuntu 20 LTS dernière version avec un noyau Linux 5.8.043.
Plusieurs problème sont apparus:

Au moment du BOOT à la ligne [ 087348] wmi : Failed to pass WDG méthod

ensuite le démarrage de la clé continu, mais une fois démarrer, le disque interne de l'ordinateur est invisible.

J'ai essayé de faire un fdisk -l le disque n'existe pas.

Donc pour l'immédiat impossible d'installer Ubuntu noyau Linux 5.8.043, dommage.
Pour l'immédiat je reste avec le Noyau 5.6.0.7

Encore merci pour votre aide, j'ai avancé avec Refind, le démarrage est plus agréable.
Amicales salutations. smile

Hors ligne

#12 Le 23/02/2021, à 17:41

geole

Re : Installation double boot sur DELL Inspiron 7490

JeanLuc51 a écrit :

Donc pour l'immédiat impossible d'installer Ubuntu noyau Linux 5.8.043, dommage.
Pour l'immédiat je reste avec le Noyau 5.6.0.7

Bonjour.
Pourquoi ne pas tenter en avant première le noyau 5.10?
https://cdimage.ubuntu.com/daily-live/c … -amd64.iso
https://cdimage.ubuntu.com/daily-live/c … SHA256SUMS


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne