#1 Le 04/05/2021, à 15:10
- DonLope
[Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Bonjour,
Je me décide enfin à traiter les lenteurs de démarrage de mon Ubuntu 20.04, seul OS installé sur un mini-ordinateur NUC avec deux disques durs externes. Ce n'est pas une installation 'de zéro', mais une mise à jour depuis 18.04 (et même 16.04 je crois...). Et le démarrage est nettement plus lent depuis 20.04: plus de 4 minutes entre l'appui sur le bouton Marche et le bureau Ubuntu affiché et opérationnel.
J'ai lu pas mal de post similaires, et donc tenté déjà quelques opérations, pour gagner environ 20 sec... Autant dire pas grand chose ;-) Au dernier démarrage par exemple j'ai d'abord eu 1 minute d'écran noir avant de voir le logo Ubuntu puis 3'15 avant de voir le bureau Ubuntu. Donc 4'15 au total.
Je cherche donc des conseils pour revenir à un démarrage raisonnable (moins de 2 minutes ?)...
Voilà ce que j'ai déjà fait:
- suppression de paquets (en suivant les conseils de https://doc.ubuntu-fr.org/optimisation) :
> blueman bluez-alsa bluez-cups
> modem-manager
> ppp pptp-linux network-manager-pptp network-manager-pptp-gnome
> brltty brltty-x11
> speech-dispatcher
> snapd snapd-login-service snap-confine
> mlocate
- désactivation de services, que j'ai finalement réactivé car impact négligeable:
> apt-daily-upgrade.service
> apt-daily.service
> apt-daily-upgrade.timer
> apt-daily.timer
> nmbd.service
- désactivation de services, avec un gain de temps d'environ 10 secondes:
> plymouth-quit-wait.service
- un service que j'ai essayé de désactiver, mais qui semble se réactiver tout seul lors de démarrage suivant:
> apport-autoreport.service
- nettoyage du /etc/fstab qui contenait encore à tord une ligne de montage d'un vieux disque dur externe, avec un gain de temps d'environ 10 secondes:
- nettoyages préconisés sur https://forum.ubuntu-fr.org/viewtopic.php?id=2054585:
> dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
> sudo apt clean && snap list --all | awk 'BEGIN {print "#! /bin/sh\n"} ; /désactivé|disabled/ {print "snap remove "$1" --revision "$3"\n"} ; END {print "exit 0"}' > script && chmod +x script && ./script && rm script && echo && snap list --all && echo && df -Th | grep -Ev "tmpfs|squashfs"
> apt-mark showmanual | grep -E "linux-.*[0-9]" | grep -v "hwe" | xargs -r sudo apt-mark auto
> sudo apt autoremove --purge -y
> sudo apt full-upgrade
- autres commandes
> sudo apt autoclean
> sudo apt autoremove
> sudo update-initramfs -u -k all
Voilà les retours de commandes que me semblent régulièrement demandées pour un dépannage (donc j'anticipe):
$ systemd-analyze
Startup finished in 5.213s (kernel) + 1min 25.325s (userspace) = 1min 30.539s
graphical.target reached after 1min 12.045s in userspace$ systemd-analyze blame
29.690s apport-autoreport.service
25.083s networkd-dispatcher.service
22.657s systemd-journal-flush.service
20.771s udisks2.service
19.737s dev-sda1.device
18.865s accounts-daemon.service
14.344s dev-loop0.device
13.911s dev-loop1.device
12.945s dev-loop6.device
12.832s dev-loop8.device
12.818s dev-loop2.device
12.648s avahi-daemon.service
12.446s NetworkManager.service
12.412s dev-loop3.device
12.100s dev-loop4.device
11.823s switcheroo-control.service
11.776s thermald.service
11.774s wpa_supplicant.service
11.763s systemd-logind.service
10.888s dev-loop5.device
10.882s dev-loop7.device
10.705s NetworkManager-wait-online.service
10.585s bandwidthd.service
9.359s nmbd.service
9.123s smartmontools.service
7.468s systemd-udevd.service
7.443s systemd-resolved.service
7.072s smbd.service
5.311s gpu-manager.service
4.378s rsyslog.service
3.748s grub-common.service
3.715s gdm.service
3.489s user@1000.service
2.994s colord.service
2.709s networking.service
2.582s apport.service
2.571s plymouth-read-write.service
1.597s systemd-sysusers.service
1.594s e2scrub_reap.service
1.551s lm-sensors.service
1.446s systemd-modules-load.service
1.328s keyboard-setup.service
1.163s polkit.service
1.140s snap-core-10958.mount
1.097s systemd-tmpfiles-setup.service
1.096s systemd-sysctl.service
1.082s systemd-random-seed.service
1.080s snap-core18-1997.mount
1.041s systemd-journald.service
1.038s upower.service
943ms systemd-tmpfiles-setup-dev.service
931ms atd.service
892ms systemd-udev-trigger.service
882ms snap-gnome\x2d3\x2d26\x2d1604-102.mount
863ms grub-initrd-fallback.service
809ms modprobe@drm.service
776ms binfmt-support.service
685ms snap-gnome\x2d3\x2d28\x2d1804-145.mount
598ms setvtrgb.service
563ms kerneloops.service
518ms snap-gnome\x2d3\x2d34\x2d1804-66.mount
508ms dev-disk-by\x2duuid-55d73341\x2d6618\x2d4f85\x2d8ef6\x2dbd542bbf26ca.swap
474ms kmod-static-nodes.service
446ms sabnzbdplus.service
416ms ifupdown-pre.service
413ms dev-hugepages.mount
410ms dev-mqueue.mount
407ms sys-kernel-debug.mount
404ms sys-kernel-tracing.mount
394ms systemd-rfkill.service
376ms snap-gnome\x2dsystem\x2dmonitor-157.mount
331ms plymouth-start.service
321ms ufw.service
312ms systemd-timesyncd.service
280ms hddtemp.service
245ms apparmor.service
243ms snap-snap\x2dstore-518.mount
241ms snap-sweethome3d\x2dhomedesign-13.mount
240ms console-setup.service
230ms snap-gtk\x2dcommon\x2dthemes-1515.mount
174ms systemd-remount-fs.service
154ms systemd-tmpfiles-clean.service
124ms rtkit-daemon.service
99ms user-runtime-dir@1000.service
91ms systemd-update-utmp.service
82ms systemd-user-sessions.service
73ms proc-sys-fs-binfmt_misc.mount
58ms openvpn.service
54ms alsa-restore.service
40ms resolvconf-pull-resolved.service
25ms systemd-update-utmp-runlevel.service
11ms sys-fs-fuse-connections.mount
8ms sys-kernel-config.mount
1ms clean-mount-point@media-csbobillier-DONNEES.service
1ms clean-mount-point@media-csbobillier-SAUVEGARDE.service $ systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @1min 12.045s
└─multi-user.target @1min 12.043s
└─smbd.service @1min 4.968s +7.072s
└─nmbd.service @55.604s +9.359s
└─network-online.target @55.383s
└─NetworkManager-wait-online.service @44.674s +10.705s
└─NetworkManager.service @32.221s +12.446s
└─dbus.service @32.208s
└─basic.target @31.805s
└─sockets.target @31.804s
└─uuidd.socket @31.804s
└─sysinit.target @31.558s
└─systemd-timesyncd.service @31.245s +312ms
└─systemd-tmpfiles-setup.service @30.137s +1.097s
└─systemd-journal-flush.service @7.476s +22.657s
└─systemd-journald.service @6.431s +1.041s
└─systemd-journald.socket @6.414s
└─-.mount @6.383s
└─system.slice @6.383s
└─-.slice @6.383s$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x368, date = 2019-04-23
[ 0.000000] Linux version 5.4.0-72-generic (buildd@lcy01-amd64-019) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #80-Ubuntu SMP Mon Apr 12 17:35:00 UTC 2021 (Ubuntu 5.4.0-72.80-generic 5.4.101)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-72-generic root=UUID=671a7b4a-b8e8-4c19-8037-fdb97a806338 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007b0b4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b0b5000-0x000000007b134fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b135000-0x000000007b145fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007b146000-0x000000007b63cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b63d000-0x000000007b949fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b94a000-0x000000007bb18fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bb19000-0x000000007bfc4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bfc5000-0x000000007bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: /NUC5PPYB, BIOS PYBSWCEL.86A.0031.2015.0601.1712 06/01/2015
[ 0.000000] tsc: Detected 1600.000 MHz processor
[ 0.005297] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005302] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.005321] last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.005329] MTRR default type: uncachable
[ 0.005331] MTRR fixed ranges enabled:
[ 0.005336] 00000-9FFFF write-back
[ 0.005338] A0000-BFFFF uncachable
[ 0.005341] C0000-FFFFF write-protect
[ 0.005343] MTRR variable ranges enabled:
[ 0.005346] 0 base 000000000 mask F80000000 write-back
[ 0.005349] 1 base 07CB00000 mask FFFF00000 uncachable
[ 0.005352] 2 base 07CC00000 mask FFFC00000 uncachable
[ 0.005355] 3 base 07D000000 mask FFF000000 uncachable
[ 0.005358] 4 base 07E000000 mask FFE000000 uncachable
[ 0.005360] 5 base 100000000 mask F00000000 write-back
[ 0.005363] 6 base 200000000 mask F80000000 write-back
[ 0.005367] 7 disabled
[ 0.005481] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.005607] total RAM covered: 8139M
[ 0.006308] Found optimal setting for mtrr clean up
[ 0.006311] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
[ 0.006408] e820: update [mem 0x7cb00000-0xffffffff] usable ==> reserved
[ 0.006420] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.013769] found SMP MP-table at [mem 0x000fd830-0x000fd83f]
[ 0.014174] check: Scanning 1 areas for low memory corruption
[ 0.015738] RAMDISK: [mem 0x31edd000-0x34f65fff]
[ 0.015759] ACPI: Early table checksum verification disabled
[ 0.015767] ACPI: RSDP 0x00000000000F0580 000024 (v02 INTEL )
[ 0.015775] ACPI: XSDT 0x000000007B138080 000084 (v01 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015787] ACPI: FACP 0x000000007B142E90 00010C (v05 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015798] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20190816/tbfadt-564)
[ 0.015811] ACPI: DSDT 0x000000007B138198 00ACF8 (v02 INTEL NUC5PPYB 0000001F INTL 20120913)
[ 0.015820] ACPI: FACS 0x000000007B63CE80 000040
[ 0.015826] ACPI: APIC 0x000000007B142FA0 000084 (v03 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015834] ACPI: FPDT 0x000000007B143028 000044 (v01 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015842] ACPI: FIDT 0x000000007B143070 00009C (v01 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015849] ACPI: MCFG 0x000000007B143110 00003C (v01 INTEL NUC5PPYB 0000001F MSFT 00000097)
[ 0.015857] ACPI: SSDT 0x000000007B143150 000763 (v01 INTEL NUC5PPYB 0000001F INTL 20061109)
[ 0.015865] ACPI: SSDT 0x000000007B1438B8 000290 (v01 INTEL NUC5PPYB 0000001F INTL 20061109)
[ 0.015873] ACPI: SSDT 0x000000007B143B48 00017A (v01 INTEL NUC5PPYB 0000001F INTL 20061109)
[ 0.015880] ACPI: UEFI 0x000000007B143CC8 000042 (v01 INTEL NUC5PPYB 0000001F 00000000)
[ 0.015888] ACPI: LPIT 0x000000007B143D10 000104 (v01 INTEL NUC5PPYB 0000001F MSFT 0100000D)
[ 0.015896] ACPI: CSRT 0x000000007B143E18 00014C (v00 INTEL NUC5PPYB 0000001F MSFT 0100000D)
[ 0.015903] ACPI: SSDT 0x000000007B143F68 0011E6 (v01 INTEL NUC5PPYB 0000001F INTL 20061109)
[ 0.015923] ACPI: Local APIC address 0xfee00000
[ 0.016193] No NUMA configuration found
[ 0.016196] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.016220] NODE_DATA(0) allocated [mem 0x27ffd0000-0x27fffafff]
[ 0.017067] Zone ranges:
[ 0.017071] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.017076] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.017081] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.017085] Device empty
[ 0.017088] Movable zone start for each node
[ 0.017097] Early memory node ranges
[ 0.017100] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.017104] node 0: [mem 0x0000000000100000-0x000000003fffffff]
[ 0.017106] node 0: [mem 0x0000000040200000-0x000000007b0b4fff]
[ 0.017108] node 0: [mem 0x000000007b94a000-0x000000007bb18fff]
[ 0.017110] node 0: [mem 0x000000007bfc5000-0x000000007bffffff]
[ 0.017112] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.017547] Zeroed struct page in unavailable ranges: 20389 pages
[ 0.017551] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.017556] On node 0 totalpages: 2076763
[ 0.017559] DMA zone: 64 pages used for memmap
[ 0.017561] DMA zone: 21 pages reserved
[ 0.017565] DMA zone: 3996 pages, LIFO batch:0
[ 0.017721] DMA32 zone: 7811 pages used for memmap
[ 0.017723] DMA32 zone: 499903 pages, LIFO batch:63
[ 0.043106] Normal zone: 24576 pages used for memmap
[ 0.043108] Normal zone: 1572864 pages, LIFO batch:63
[ 0.099164] Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff]
[ 0.099627] ACPI: PM-Timer IO Port: 0x408
[ 0.099633] ACPI: Local APIC address 0xfee00000
[ 0.099655] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.099658] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.099661] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.099663] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.099683] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.099689] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.099693] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.099696] ACPI: IRQ0 used by override.
[ 0.099700] ACPI: IRQ9 used by override.
[ 0.099705] Using ACPI (MADT) for SMP configuration information
[ 0.099710] TSC deadline timer available
[ 0.099713] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.099764] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.099768] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.099770] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.099772] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.099774] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.099778] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.099782] PM: Registered nosave memory: [mem 0x7b0b5000-0x7b134fff]
[ 0.099784] PM: Registered nosave memory: [mem 0x7b135000-0x7b145fff]
[ 0.099786] PM: Registered nosave memory: [mem 0x7b146000-0x7b63cfff]
[ 0.099787] PM: Registered nosave memory: [mem 0x7b63d000-0x7b949fff]
[ 0.099792] PM: Registered nosave memory: [mem 0x7bb19000-0x7bfc4fff]
[ 0.099796] PM: Registered nosave memory: [mem 0x7c000000-0x7cefffff]
[ 0.099798] PM: Registered nosave memory: [mem 0x7cf00000-0x7eefffff]
[ 0.099800] PM: Registered nosave memory: [mem 0x7ef00000-0xe00f7fff]
[ 0.099801] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.099803] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.099805] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.099806] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
[ 0.099808] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.099810] PM: Registered nosave memory: [mem 0xfed09000-0xff97ffff]
[ 0.099811] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.099816] [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[ 0.099818] Booting paravirtualized kernel on bare hardware
[ 0.099825] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.099843] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.100821] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288
[ 0.100844] pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152
[ 0.100847] pcpu-alloc: [0] 0 1 2 3
[ 0.100939] Built 1 zonelists, mobility grouping on. Total pages: 2044291
[ 0.100942] Policy zone: Normal
[ 0.100946] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-72-generic root=UUID=671a7b4a-b8e8-4c19-8037-fdb97a806338 ro quiet splash vt.handoff=7
[ 0.103746] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.105080] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.105165] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.126586] Calgary: detecting Calgary via BIOS EBDA area
[ 0.126589] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.190879] Memory: 8014040K/8307052K available (14339K kernel code, 2400K rwdata, 5008K rodata, 2732K init, 4972K bss, 293012K reserved, 0K cma-reserved)
[ 0.190894] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.191363] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.191403] Kernel/User page tables isolation: enabled
[ 0.191443] ftrace: allocating 44576 entries in 175 pages
[ 0.226782] rcu: Hierarchical RCU implementation.
[ 0.226787] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.226788] Tasks RCU enabled.
[ 0.226791] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.226793] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.236271] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.236824] random: crng done (trusting CPU's manufacturer)
[ 0.236881] spurious 8259A interrupt: IRQ7.
[ 0.236905] vt handoff: transparent VT on vt#7
[ 0.236925] Console: colour dummy device 80x25
[ 0.236934] printk: console [tty0] enabled
[ 0.237001] ACPI: Core revision 20190816
[ 0.237247] APIC: Switch to symmetric I/O mode setup
[ 0.238561] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.238573] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[ 0.238578] pid_max: default: 32768 minimum: 301
[ 0.238693] LSM: Security Framework initializing
[ 0.238730] Yama: becoming mindful.
[ 0.238816] AppArmor: AppArmor initialized
[ 0.238948] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.238989] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.239039] *** VALIDATE tmpfs ***
[ 0.239466] *** VALIDATE proc ***
[ 0.239629] *** VALIDATE cgroup1 ***
[ 0.239633] *** VALIDATE cgroup2 ***
[ 0.239761] process: using mwait in idle threads
[ 0.239771] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.239775] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.239783] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.239787] Spectre V2 : Mitigation: Full generic retpoline
[ 0.239788] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.239790] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.239793] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.239798] MDS: Mitigation: Clear CPU buffers
[ 0.240151] Freeing SMP alternatives memory: 40K
[ 0.242567] smpboot: CPU0: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[ 0.242567] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.242567] ... version: 3
[ 0.242567] ... bit width: 40
[ 0.242567] ... generic registers: 2
[ 0.242567] ... value mask: 000000ffffffffff
[ 0.242567] ... max period: 0000007fffffffff
[ 0.242567] ... fixed-purpose events: 3
[ 0.242567] ... event mask: 0000000700000003
[ 0.242567] rcu: Hierarchical SRCU implementation.
[ 0.242567] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.242567] smp: Bringing up secondary CPUs ...
[ 0.242567] x86: Booting SMP configuration:
[ 0.242567] .... node #0, CPUs: #1 #2 #3
[ 0.247139] smp: Brought up 1 node, 4 CPUs
[ 0.247139] smpboot: Max logical packages: 1
[ 0.247139] smpboot: Total of 4 processors activated (12800.00 BogoMIPS)
[ 0.248453] devtmpfs: initialized
[ 0.248453] x86/mm: Memory block size: 128MB
[ 0.252518] PM: Registering ACPI NVS region [mem 0x7b146000-0x7b63cfff] (5206016 bytes)
[ 0.252518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.252518] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.252518] pinctrl core: initialized pinctrl subsystem
[ 0.252518] PM: RTC time: 12:07:05, date: 2021-05-04
[ 0.252518] NET: Registered protocol family 16
[ 0.252518] audit: initializing netlink subsys (disabled)
[ 0.252518] audit: type=2000 audit(1620130025.012:1): state=initialized audit_enabled=0 res=1
[ 0.254721] EISA bus registered
[ 0.254747] cpuidle: using governor ladder
[ 0.254760] cpuidle: using governor menu
[ 0.254870] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.254873] ACPI: bus type PCI registered
[ 0.254876] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.255072] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.255081] PCI: not using MMCONFIG
[ 0.255083] PCI: Using configuration type 1 for base access
[ 0.256235] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.260771] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.262879] ACPI: Added _OSI(Module Device)
[ 0.262881] ACPI: Added _OSI(Processor Device)
[ 0.262883] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.262885] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.262888] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.262890] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.262893] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.293604] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.299806] ACPI: Dynamic OEM Table Load:
[ 0.299825] ACPI: SSDT 0xFFFF93B376BB4800 000697 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.303170] ACPI: Dynamic OEM Table Load:
[ 0.303184] ACPI: SSDT 0xFFFF93B37630D000 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.306551] ACPI: Dynamic OEM Table Load:
[ 0.306567] ACPI: SSDT 0xFFFF93B37623EA00 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.308900] ACPI: Dynamic OEM Table Load:
[ 0.308912] ACPI: SSDT 0xFFFF93B376B9F6C0 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.315927] ACPI: Interpreter enabled
[ 0.315998] ACPI: (supports S0 S3 S4 S5)
[ 0.316004] ACPI: Using IOAPIC for interrupt routing
[ 0.316123] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.321356] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.321409] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.322970] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.334769] ACPI: Power Resource [USBC] (on)
[ 0.350134] ACPI: Power Resource [CLK0] (off)
[ 0.351073] ACPI: Power Resource [CLK0] (off)
[ 0.351218] ACPI: Power Resource [CLK1] (off)
[ 0.367690] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.367708] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.367915] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.369781] PCI host bridge to bus 0000:00
[ 0.369789] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.369795] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.369798] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.369802] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.369805] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.369809] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.369812] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.369815] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.369820] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.369848] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.370504] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.370536] pci 0000:00:02.0: reg 0x10: [mem 0x88000000-0x88ffffff 64bit]
[ 0.370550] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x87ffffff 64bit pref]
[ 0.370561] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.371077] pci 0000:00:12.0: [8086:2296] type 00 class 0x080501
[ 0.371108] pci 0000:00:12.0: reg 0x10: [mem 0x8941c000-0x8941cfff]
[ 0.371228] pci 0000:00:12.0: PME# supported from D0 D3hot
[ 0.371789] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.371859] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.371873] pci 0000:00:13.0: reg 0x24: [mem 0x8941b000-0x8941b7ff]
[ 0.371949] pci 0000:00:13.0: PME# supported from D3hot
[ 0.372365] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.372400] pci 0000:00:14.0: reg 0x10: [mem 0x89400000-0x8940ffff 64bit]
[ 0.372508] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.372996] pci 0000:00:18.0: [8086:22c0] type 00 class 0x080102
[ 0.373028] pci 0000:00:18.0: reg 0x10: [mem 0x89414000-0x89417fff]
[ 0.373574] pci 0000:00:18.6: [8086:22c6] type 00 class 0x0c8000
[ 0.373606] pci 0000:00:18.6: reg 0x10: [mem 0x8941a000-0x8941afff]
[ 0.374081] pci 0000:00:18.7: [8086:22c7] type 00 class 0x0c8000
[ 0.374114] pci 0000:00:18.7: reg 0x10: [mem 0x89419000-0x89419fff]
[ 0.374567] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.374603] pci 0000:00:1a.0: reg 0x10: [mem 0x89100000-0x891fffff]
[ 0.374616] pci 0000:00:1a.0: reg 0x14: [mem 0x89000000-0x890fffff]
[ 0.374724] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.375149] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.375190] pci 0000:00:1b.0: reg 0x10: [mem 0x89410000-0x89413fff 64bit]
[ 0.375305] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.375728] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.375887] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.376331] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[ 0.376486] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.376958] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[ 0.377109] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.377590] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.378126] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.378197] pci 0000:00:1f.3: reg 0x10: [mem 0x89418000-0x8941801f]
[ 0.378314] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.379058] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.379861] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[ 0.380912] pci 0000:02:00.0: reg 0x10: [mem 0x89300000-0x89301fff 64bit]
[ 0.384810] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.386798] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.386808] pci 0000:00:1c.1: bridge window [mem 0x89300000-0x893fffff]
[ 0.387007] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.387053] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.387093] pci 0000:03:00.0: reg 0x18: [mem 0x89204000-0x89204fff 64bit]
[ 0.387118] pci 0000:03:00.0: reg 0x20: [mem 0x89200000-0x89203fff 64bit]
[ 0.387282] pci 0000:03:00.0: supports D1 D2
[ 0.387286] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.387588] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.387595] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.387602] pci 0000:00:1c.2: bridge window [mem 0x89200000-0x892fffff]
[ 0.392690] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.393003] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.393316] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.393621] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.393929] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.394235] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.394543] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.394850] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.399481] iommu: Default domain type: Translated
[ 0.399481] SCSI subsystem initialized
[ 0.399481] libata version 3.00 loaded.
[ 0.399481] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.399481] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.399481] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.399481] vgaarb: loaded
[ 0.399481] ACPI: bus type USB registered
[ 0.399481] usbcore: registered new interface driver usbfs
[ 0.399481] usbcore: registered new interface driver hub
[ 0.399481] usbcore: registered new device driver usb
[ 0.399481] pps_core: LinuxPPS API ver. 1 registered
[ 0.399481] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.399481] PTP clock support registered
[ 0.399481] EDAC MC: Ver: 3.0.0
[ 0.399481] PCI: Using ACPI for IRQ routing
[ 0.413471] PCI: pci_cache_line_size set to 64 bytes
[ 0.413880] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.413885] e820: reserve RAM buffer [mem 0x7b0b5000-0x7bffffff]
[ 0.413888] e820: reserve RAM buffer [mem 0x7bb19000-0x7bffffff]
[ 0.414181] NetLabel: Initializing
[ 0.414183] NetLabel: domain hash size = 128
[ 0.414185] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.414237] NetLabel: unlabeled traffic allowed by default
[ 0.415847] clocksource: Switched to clocksource tsc-early
[ 0.460479] *** VALIDATE bpf ***
[ 0.460632] VFS: Disk quotas dquot_6.6.0
[ 0.460679] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460739] *** VALIDATE ramfs ***
[ 0.460753] *** VALIDATE hugetlbfs ***
[ 0.461011] AppArmor: AppArmor Filesystem Enabled
[ 0.461091] pnp: PnP ACPI init
[ 0.461253] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.461805] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.461810] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.461814] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.461831] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462522] system 00:02: [io 0x0a00-0x0a2f] has been reserved
[ 0.462527] system 00:02: [io 0x0a30-0x0a3f] has been reserved
[ 0.462531] system 00:02: [io 0x0a40-0x0a4f] has been reserved
[ 0.462543] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.463972] pnp 00:03: [dma 0 disabled]
[ 0.464071] pnp 00:03: Plug and Play ACPI device, IDs ITE8713 (active)
[ 0.469356] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.469506] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.469511] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.469519] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.469523] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.469526] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.469530] system 00:05: [mem 0xfed08000-0xfed09fff] could not be reserved
[ 0.469535] system 00:05: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 0.469538] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.469543] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.469555] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.471020] pnp: PnP ACPI: found 6 devices
[ 0.476806] thermal_sys: Registered thermal governor 'fair_share'
[ 0.476809] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.476812] thermal_sys: Registered thermal governor 'step_wise'
[ 0.476813] thermal_sys: Registered thermal governor 'user_space'
[ 0.476815] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.481424] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.481538] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.481547] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.481552] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.481585] pci 0000:00:1c.0: BAR 14: assigned [mem 0x89500000-0x896fffff]
[ 0.481596] pci 0000:00:1c.0: BAR 15: assigned [mem 0x89700000-0x898fffff 64bit pref]
[ 0.481605] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.481615] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.481623] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.481636] pci 0000:00:1c.0: bridge window [mem 0x89500000-0x896fffff]
[ 0.481643] pci 0000:00:1c.0: bridge window [mem 0x89700000-0x898fffff 64bit pref]
[ 0.481655] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.481662] pci 0000:00:1c.1: bridge window [mem 0x89300000-0x893fffff]
[ 0.481676] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.481681] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.481688] pci 0000:00:1c.2: bridge window [mem 0x89200000-0x892fffff]
[ 0.481702] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.481707] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.481711] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.481714] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.481717] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.481721] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.481724] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.481727] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 0.481735] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.481738] pci_bus 0000:01: resource 1 [mem 0x89500000-0x896fffff]
[ 0.481741] pci_bus 0000:01: resource 2 [mem 0x89700000-0x898fffff 64bit pref]
[ 0.481746] pci_bus 0000:02: resource 1 [mem 0x89300000-0x893fffff]
[ 0.481750] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.481753] pci_bus 0000:03: resource 1 [mem 0x89200000-0x892fffff]
[ 0.482252] NET: Registered protocol family 2
[ 0.482744] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.482930] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.483462] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.483844] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.484018] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.484137] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.484336] NET: Registered protocol family 1
[ 0.484362] NET: Registered protocol family 44
[ 0.484397] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.485260] PCI: CLS 0 bytes, default 64
[ 0.485402] Trying to unpack rootfs image as initramfs...
[ 0.912414] Freeing initrd memory: 49700K
[ 0.912421] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.912425] software IO TLB: mapped [mem 0x770b5000-0x7b0b5000] (64MB)
[ 0.912545] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.912595] clocksource: Switched to clocksource tsc
[ 0.912705] check: Scanning for low memory corruption every 60 seconds
[ 0.913898] Initialise system trusted keyrings
[ 0.913936] Key type blacklist registered
[ 0.914038] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.918246] zbud: loaded
[ 0.919388] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.919917] fuse: init (API version 7.31)
[ 0.919972] *** VALIDATE fuse ***
[ 0.919977] *** VALIDATE fuse ***
[ 0.920275] Platform Keyring initialized
[ 0.927467] Key type asymmetric registered
[ 0.927470] Asymmetric key parser 'x509' registered
[ 0.927497] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.927601] io scheduler mq-deadline registered
[ 0.929162] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.929346] efifb: probing for efifb
[ 0.929374] efifb: No BGRT, not showing boot graphics
[ 0.929377] efifb: framebuffer at 0xa0000, using 64k, total 64k
[ 0.929380] efifb: mode is 640x480x1, linelength=80, pages=1
[ 0.929381] efifb: scrolling: redraw
[ 0.929384] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.929537] fbcon: Deferring console take-over
[ 0.929540] fb0: EFI VGA frame buffer device
[ 0.929564] intel_idle: MWAIT substates: 0x33000020
[ 0.929569] intel_idle: v0.4.1 model 0x4C
[ 0.930125] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.930452] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.930504] ACPI: Lid Switch [LID0]
[ 0.930641] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.930707] ACPI: Sleep Button [SLPB]
[ 0.930805] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.930896] ACPI: Power Button [PWRF]
[ 0.938478] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.946469] hpet: number irqs doesn't agree with number of timers
[ 0.946669] Linux agpgart interface v0.103
[ 0.953627] loop: module loaded
[ 0.954261] libphy: Fixed MDIO Bus: probed
[ 0.954264] tun: Universal TUN/TAP device driver, 1.6
[ 0.954477] PPP generic driver version 2.4.2
[ 0.954715] VFIO - User Level meta-driver version: 0.3
[ 0.955278] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.955290] ehci-pci: EHCI PCI platform driver
[ 0.955323] ehci-platform: EHCI generic platform driver
[ 0.955352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.955359] ohci-pci: OHCI PCI platform driver
[ 0.955382] ohci-platform: OHCI generic platform driver
[ 0.955398] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.955867] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.955883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.957029] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[ 0.957176] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.957631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.957637] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.957640] usb usb1: Product: xHCI Host Controller
[ 0.957644] usb usb1: Manufacturer: Linux 5.4.0-72-generic xhci-hcd
[ 0.957647] usb usb1: SerialNumber: 0000:00:14.0
[ 0.958042] hub 1-0:1.0: USB hub found
[ 0.958079] hub 1-0:1.0: 7 ports detected
[ 0.959910] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.959921] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.959930] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.960070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.960074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.960077] usb usb2: Product: xHCI Host Controller
[ 0.960080] usb usb2: Manufacturer: Linux 5.4.0-72-generic xhci-hcd
[ 0.960083] usb usb2: SerialNumber: 0000:00:14.0
[ 0.960624] hub 2-0:1.0: USB hub found
[ 0.960657] hub 2-0:1.0: 6 ports detected
[ 0.962269] i8042: PNP: No PS/2 controller found.
[ 0.962510] mousedev: PS/2 mouse device common for all mice
[ 0.963772] rtc_cmos 00:00: RTC can wake from S4
[ 0.964242] rtc_cmos 00:00: registered as rtc0
[ 0.964295] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram
[ 0.964321] i2c /dev entries driver
[ 0.964463] device-mapper: uevent: version 1.0.3
[ 0.964726] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.964791] platform eisa.0: Probing EISA bus 0
[ 0.964798] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.964801] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.964804] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.964807] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.964810] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.964813] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.964816] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.964821] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.964824] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.964828] platform eisa.0: EISA: Detected 0 cards
[ 0.964837] intel_pstate: Intel P-state driver initializing
[ 0.966212] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.966461] drop_monitor: Initializing network drop monitor service
[ 0.966818] NET: Registered protocol family 10
[ 0.989305] Segment Routing with IPv6
[ 0.989386] NET: Registered protocol family 17
[ 0.990004] Key type dns_resolver registered
[ 0.991310] RAS: Correctable Errors collector initialized.
[ 0.991719] microcode: sig=0x406c3, pf=0x1, revision=0x368
[ 0.992190] microcode: Microcode Update Driver: v2.2.
[ 0.992196] IPI shorthand broadcast: enabled
[ 0.992212] sched_clock: Marking stable (990279200, 1898225)->(1003027500, -10850075)
[ 0.992763] registered taskstats version 1
[ 0.992785] Loading compiled-in X.509 certificates
[ 0.995429] Loaded X.509 cert 'Build time autogenerated kernel key: f55c4634ad654377a9ba7bad1ef0d32977b1cff1'
[ 0.996884] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.998333] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.998406] zswap: loaded using pool lzo/zbud
[ 0.999388] Key type ._fscrypt registered
[ 0.999392] Key type .fscrypt registered
[ 1.022017] Key type big_key registered
[ 1.033669] Key type encrypted registered
[ 1.033678] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.033698] ima: No TPM chip found, activating TPM-bypass!
[ 1.033715] ima: Allocated hash algorithm: sha1
[ 1.033730] ima: No architecture policies found
[ 1.033751] evm: Initialising EVM extended attributes:
[ 1.033752] evm: security.selinux
[ 1.033754] evm: security.SMACK64
[ 1.033755] evm: security.SMACK64EXEC
[ 1.033756] evm: security.SMACK64TRANSMUTE
[ 1.033757] evm: security.SMACK64MMAP
[ 1.033758] evm: security.apparmor
[ 1.033759] evm: security.ima
[ 1.033762] evm: security.capability
[ 1.033764] evm: HMAC attrs: 0x1
[ 1.034767] PM: Magic number: 5:629:126
[ 1.034913] acpi device:01: hash matches
[ 1.035320] rtc_cmos 00:00: setting system clock to 2021-05-04T12:07:06 UTC (1620130026)
[ 1.045571] Freeing unused decrypted memory: 2040K
[ 1.047272] Freeing unused kernel image memory: 2732K
[ 1.071139] Write protecting the kernel read-only data: 22528k
[ 1.073600] Freeing unused kernel image memory: 2008K
[ 1.074806] Freeing unused kernel image memory: 1136K
[ 1.098260] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.098531] x86/mm: Checking user space page tables
[ 1.121415] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.121422] Run /init as init process
[ 1.294914] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.444793] usb 1-1: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=23.01
[ 1.444797] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.444800] usb 1-1: Product: USB Receiver
[ 1.444801] usb 1-1: Manufacturer: Logitech
[ 1.459029] ahci 0000:00:13.0: version 3.0
[ 1.459464] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.459469] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
[ 1.460789] scsi host0: ahci
[ 1.464954] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.465201] sdhci: Secure Digital Host Controller Interface driver
[ 1.465204] sdhci: Copyright(c) Pierre Ossman
[ 1.465955] scsi host1: ahci
[ 1.466113] ata1: SATA max UDMA/133 abar m2048@0x8941b000 port 0x8941b100 irq 119
[ 1.466116] ata2: SATA max UDMA/133 abar m2048@0x8941b000 port 0x8941b180 irq 119
[ 1.467279] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.487599] libphy: r8169: probed
[ 1.487925] r8169 0000:03:00.0 eth0: RTL8168h/8111h, b8:ae:ed:78:1d:b9, XID 541, IRQ 120
[ 1.487929] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.508614] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 21)
[ 1.508964] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[ 1.510612] mmc0: SDHCI controller on PCI [0000:00:12.0] using ADMA
[ 1.576010] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.613085] usb 2-4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21
[ 1.613091] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.613095] usb 2-4: Product: 4-Port USB 3.0 Hub
[ 1.613098] usb 2-4: Manufacturer: Generic
[ 1.621589] hub 2-4:1.0: USB hub found
[ 1.623005] hub 2-4:1.0: 4 ports detected
[ 1.730922] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.781785] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.782712] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.785005] ata1.00: ATA-8: WDC WD3200BPVT-80JJ5T0, 01.01A01, max UDMA/133
[ 1.785010] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.788846] ata1.00: configured for UDMA/133
[ 1.790168] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-8 1A01 PQ: 0 ANSI: 5
[ 1.791180] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.791474] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.791480] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.791518] sd 0:0:0:0: [sda] Write Protect is off
[ 1.791523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.791591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.873673] sda: sda1 sda2 < sda5 >
[ 1.875497] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.894552] usb 1-4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21
[ 1.894557] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.894561] usb 1-4: Product: 4-Port USB 2.0 Hub
[ 1.894564] usb 1-4: Manufacturer: Generic
[ 1.896908] hub 1-4:1.0: USB hub found
[ 1.898439] hub 1-4:1.0: 4 ports detected
[ 1.971407] usb 2-4.2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 1.994633] usb 2-4.2: New USB device found, idVendor=1058, idProduct=25e2, bcdDevice=40.04
[ 1.994639] usb 2-4.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.994642] usb 2-4.2: Product: My Passport 25E2
[ 1.994646] usb 2-4.2: Manufacturer: Western Digital
[ 1.994648] usb 2-4.2: SerialNumber: 575835314441375058434435
[ 2.009164] usb-storage 2-4.2:1.0: USB Mass Storage device detected
[ 2.010184] scsi host2: usb-storage 2-4.2:1.0
[ 2.010361] usbcore: registered new interface driver usb-storage
[ 2.014152] usbcore: registered new interface driver uas
[ 2.118612] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 2.273626] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 2.273631] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.273636] usb 1-5: Product: USB2.0 Hub
[ 2.275836] hub 1-5:1.0: USB hub found
[ 2.276269] hub 1-5:1.0: 4 ports detected
[ 2.293673] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.300766] usbcore: registered new interface driver usbhid
[ 2.300768] usbhid: USB HID core driver
[ 2.308369] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52E.0001/input/input3
[ 2.351168] usb 2-4.3: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 2.367562] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 2.368208] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52E.0002/input/input4
[ 2.368871] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52E.0002/input/input5
[ 2.375420] usb 2-4.3: New USB device found, idVendor=1058, idProduct=2627, bcdDevice=40.08
[ 2.375427] usb 2-4.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.375431] usb 2-4.3: Product: My Passport 2627
[ 2.375435] usb 2-4.3: Manufacturer: Western Digital
[ 2.375438] usb 2-4.3: SerialNumber: 575855324537304348324B46
[ 2.383059] usb-storage 2-4.3:1.0: USB Mass Storage device detected
[ 2.383760] scsi host3: usb-storage 2-4.3:1.0
[ 2.427288] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52E.0002/input/input6
[ 2.428318] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 2.455005] usb 1-4.1: new high-speed USB device number 5 using xhci_hcd
[ 2.564427] usb 1-4.1: New USB device found, idVendor=04b8, idProduct=0881, bcdDevice= 1.00
[ 2.564448] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.564451] usb 1-4.1: Product: EPSON Epson Stylus SX230 Series
[ 2.564454] usb 1-4.1: Manufacturer: EPSON
[ 2.564457] usb 1-4.1: SerialNumber: 4E3853593138353905
[ 2.574960] usb-storage 1-4.1:1.2: USB Mass Storage device detected
[ 2.577390] scsi host4: usb-storage 1-4.1:1.2
[ 2.634754] usb 1-5.1: new full-speed USB device number 6 using xhci_hcd
[ 2.737859] usb 1-5.1: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 2.737866] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.796373] fbcon: Taking over console
[ 2.796558] Console: switching to colour frame buffer device 80x30
[ 2.959488] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.025399] scsi 2:0:0:0: Direct-Access WD My Passport 25E2 4004 PQ: 0 ANSI: 6
[ 3.026619] scsi 2:0:0:1: Enclosure WD SES Device 4004 PQ: 0 ANSI: 6
[ 3.033011] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.033337] scsi 2:0:0:1: Attached scsi generic sg2 type 13
[ 3.033596] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 3.033760] sd 2:0:0:0: [sdb] 7813969920 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 3.033766] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 3.034197] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.034202] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 3.034450] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.034462] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.047521] scsi 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
[ 3.047529] scsi 2:0:0:1: Failed to get diagnostic page 0x1
[ 3.047532] scsi 2:0:0:1: Failed to bind enclosure -19
[ 3.408470] scsi 3:0:0:0: Direct-Access WD My Passport 2627 4008 PQ: 0 ANSI: 6
[ 3.408980] scsi 3:0:0:1: Enclosure WD SES Device 4008 PQ: 0 ANSI: 6
[ 3.411006] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.411337] ses 3:0:0:1: Attached Enclosure device
[ 3.411681] ses 3:0:0:1: Attached scsi generic sg4 type 13
[ 3.412121] ses 3:0:0:1: Wrong diagnostic page; asked for 1 got 8
[ 3.412126] ses 3:0:0:1: Failed to get diagnostic page 0x1
[ 3.412130] ses 3:0:0:1: Failed to bind enclosure -19
[ 3.412630] sd 3:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
[ 3.412854] sd 3:0:0:0: [sdc] 9767475200 512-byte logical blocks: (5.00 TB/4.55 TiB)
[ 3.412858] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 3.413253] sd 3:0:0:0: [sdc] Write Protect is off
[ 3.413256] sd 3:0:0:0: [sdc] Mode Sense: 47 00 10 08
[ 3.413586] sd 3:0:0:0: [sdc] No Caching mode page found
[ 3.413592] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 3.459331] sdb: sdb1
[ 3.461379] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.461448] ses 2:0:0:1: Attached Enclosure device
[ 3.602371] scsi 4:0:0:0: Direct-Access EPSON Storage 1.00 PQ: 0 ANSI: 2
[ 3.603894] sd 4:0:0:0: Attached scsi generic sg5 type 0
[ 3.607144] sd 4:0:0:0: Power-on or device reset occurred
[ 3.631113] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 3.861106] sdc: sdc1
[ 3.862257] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 5.756601] systemd[1]: Inserted module 'autofs4'
[ 5.989680] systemd[1]: systemd 245.4-4ubuntu3.6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 6.007233] systemd[1]: Detected architecture x86-64.
[ 6.069744] systemd[1]: Set hostname to <ordiBureau>.
[ 11.603901] systemd[1]: Created slice system-modprobe.slice.
[ 11.604611] systemd[1]: Created slice User and Session Slice.
[ 11.604833] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.605410] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.605549] systemd[1]: Reached target User and Group Name Lookups.
[ 11.605586] systemd[1]: Reached target Remote File Systems.
[ 11.605623] systemd[1]: Reached target Slices.
[ 11.628304] systemd[1]: Listening on Syslog Socket.
[ 11.628713] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 11.628872] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.629403] systemd[1]: Listening on Journal Audit Socket.
[ 11.629630] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.629949] systemd[1]: Listening on Journal Socket.
[ 11.630233] systemd[1]: Listening on udev Control Socket.
[ 11.630405] systemd[1]: Listening on udev Kernel Socket.
[ 11.632943] systemd[1]: Mounting Huge Pages File System...
[ 11.636074] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.639422] systemd[1]: Mounting Kernel Debug File System...
[ 11.642560] systemd[1]: Mounting Kernel Trace File System...
[ 11.646921] systemd[1]: Starting Journal Service...
[ 11.650372] systemd[1]: Starting Set the console keyboard layout...
[ 11.653914] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 11.657482] systemd[1]: Starting Load Kernel Module drm...
[ 11.660588] systemd[1]: Started Nameserver information manager.
[ 11.661152] systemd[1]: Reached target Network (Pre).
[ 11.855504] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 11.855661] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 12.032762] systemd[1]: Starting Load Kernel Modules...
[ 12.035595] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.038445] systemd[1]: Starting udev Coldplug all Devices...
[ 12.041404] systemd[1]: Starting Uncomplicated firewall...
[ 12.046374] systemd[1]: Mounted Huge Pages File System.
[ 12.046736] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.047028] systemd[1]: Mounted Kernel Debug File System.
[ 12.047313] systemd[1]: Mounted Kernel Trace File System.
[ 12.128877] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 12.205958] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.209901] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.355274] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 12.355437] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 12.358023] systemd[1]: Starting Load/Save Random Seed...
[ 12.360907] systemd[1]: Starting Create System Users...
[ 12.362764] systemd[1]: Finished Uncomplicated firewall.
[ 12.467346] systemd[1]: modprobe@drm.service: Succeeded.
[ 12.468185] systemd[1]: Finished Load Kernel Module drm.
[ 12.688248] systemd[1]: Started Journal Service.
[ 12.847090] systemd-journald[275]: Received client request to flush runtime journal.
[ 12.996168] lp: driver loaded but no devices found
[ 13.259323] ppdev: user-space parallel port driver
[ 19.546936] audit: type=1400 audit(1620130045.008:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=347 comm="apparmor_parser"
[ 19.598788] audit: type=1400 audit(1620130045.056:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=346 comm="apparmor_parser"
[ 19.854862] audit: type=1400 audit(1620130045.316:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=348 comm="apparmor_parser"
[ 19.854873] audit: type=1400 audit(1620130045.316:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=348 comm="apparmor_parser"
[ 19.935004] audit: type=1400 audit(1620130045.396:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=353 comm="apparmor_parser"
[ 20.023156] audit: type=1400 audit(1620130045.484:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=345 comm="apparmor_parser"
[ 20.049082] audit: type=1400 audit(1620130045.508:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=349 comm="apparmor_parser"
[ 20.124594] audit: type=1400 audit(1620130045.584:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=355 comm="apparmor_parser"
[ 20.124606] audit: type=1400 audit(1620130045.584:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=355 comm="apparmor_parser"
[ 20.237673] audit: type=1400 audit(1620130045.696:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=350 comm="apparmor_parser"
[ 25.044757] dw_dmac_pci 0000:00:18.0: DesignWare DMA Controller, 8 channels
[ 25.550691] ite_cir: Auto-detected model: ITE8713 CIR transceiver
[ 25.550694] ite_cir: Using model: ITE8713 CIR transceiver
[ 25.550695] ite_cir: TX-capable: 1
[ 25.550697] ite_cir: Sample period (ns): 8680
[ 25.550698] ite_cir: TX carrier frequency (Hz): 38000
[ 25.550699] ite_cir: TX duty cycle (%): 33
[ 25.550700] ite_cir: RX low carrier frequency (Hz): 0
[ 25.550700] ite_cir: RX high carrier frequency (Hz): 0
[ 25.686598] Registered IR keymap rc-rc6-mce
[ 25.726777] IR RC6 protocol handler initialized
[ 25.758663] rc rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0
[ 25.758750] rc rc0: lirc_dev: driver ite-cir registered at minor = 0, raw IR receiver, raw IR transmitter
[ 25.758820] input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input9
[ 25.759035] ite_cir: driver has been successfully loaded
[ 26.234311] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 26.235093] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 26.807968] cryptd: max_cpu_qlen set to 1000
[ 27.114071] usblp 1-4.1:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0881
[ 27.114136] usbcore: registered new interface driver usblp
[ 27.182127] kauditd_printk_skb: 56 callbacks suppressed
[ 27.182130] audit: type=1400 audit(1620130052.640:68): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-xpdfimport" pid=654 comm="apparmor_parser"
[ 27.183039] audit: type=1400 audit(1620130052.644:69): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/cups-browsed" pid=652 comm="apparmor_parser"
[ 27.185931] audit: type=1400 audit(1620130052.644:70): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-senddoc" pid=656 comm="apparmor_parser"
[ 27.186370] audit: type=1400 audit(1620130052.644:71): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lsb_release" pid=653 comm="apparmor_parser"
[ 27.188112] audit: type=1400 audit(1620130052.648:72): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=655 comm="apparmor_parser"
[ 27.188122] audit: type=1400 audit(1620130052.648:73): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=655 comm="apparmor_parser"
[ 27.193405] audit: type=1400 audit(1620130052.652:74): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/tcpdump" pid=660 comm="apparmor_parser"
[ 27.201230] audit: type=1400 audit(1620130052.660:75): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=657 comm="apparmor_parser"
[ 27.201241] audit: type=1400 audit(1620130052.660:76): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=657 comm="apparmor_parser"
[ 27.201246] audit: type=1400 audit(1620130052.660:77): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=657 comm="apparmor_parser"
[ 27.433490] SSE version of gcm_enc/dec engaged.
[ 27.526196] Intel(R) Wireless WiFi driver for Linux
[ 27.526201] Copyright(c) 2003- 2015 Intel Corporation
[ 27.544137] checking generic (a0000 10000) vs hw (80000000 8000000)
[ 27.544140] fb0: switching to inteldrmfb from EFI VGA
[ 27.544332] Console: switching to colour dummy device 80x25
[ 27.544394] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 27.544512] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 27.544513] [drm] Driver supports precise vblank timestamp query.
[ 27.547178] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 27.573991] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 27.576784] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 27.577202] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 27.689149] fbcon: i915drmfb (fb0) is primary device
[ 27.689340] Console: switching to colour frame buffer device 240x67
[ 27.689398] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 28.038702] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[ 28.038706] iwlwifi 0000:02:00.0: Found debug configuration: 0
[ 28.039473] iwlwifi 0000:02:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[ 28.199645] Bluetooth: Core ver 2.22
[ 28.199696] NET: Registered protocol family 31
[ 28.199698] Bluetooth: HCI device and connection manager initialized
[ 28.199706] Bluetooth: HCI socket layer initialized
[ 28.199709] Bluetooth: L2CAP socket layer initialized
[ 28.199716] Bluetooth: SCO socket layer initialized
[ 29.863486] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 30.010923] usbcore: registered new interface driver btusb
[ 30.037376] Bluetooth: hci0: read Intel version: 370810011003110e32
[ 30.037380] Bluetooth: hci0: Intel device is already patched. patch num: 32
[ 30.401409] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=2 (0x1b/0x21/0x0/0x0/0x0) type:hp
[ 30.401413] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.401416] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.401418] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 30.401419] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 30.401421] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 30.401424] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 30.463728] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 30.478383] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[ 30.481051] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 30.489875] iwlwifi 0000:02:00.0: base HW address: 34:02:86:d2:ac:f3
[ 30.552322] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 30.554263] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 30.727596] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 30.727717] input: HDA Intel PCH Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 30.727820] input: HDA Intel PCH Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 30.727925] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 31.277803] intel_rapl_common: Found RAPL domain package
[ 31.277808] intel_rapl_common: Found RAPL domain core
[ 32.403171] Adding 8305660k swap on /dev/sda5. Priority:-2 extents:1 across:8305660k FS
[ 56.041956] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 56.152014] r8169 0000:03:00.0 eth0: Link is Down
[ 59.737456] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 59.737522] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 60.129533] kauditd_printk_skb: 122 callbacks suppressed
[ 60.129536] audit: type=1400 audit(1620130085.588:200): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1216 comm="cups-browsed" capability=23 capname="sys_nice"
[ 61.302088] usblp1: removed
[ 61.312785] usblp 1-4.1:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0881
[ 204.674539] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 204.708964] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 204.929720] rfkill: input handler disabled$ sudo inxi -Fxz
System: Kernel: 5.4.0-72-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: Gnome 3.36.7
Distro: Ubuntu 20.04.2 LTS (Focal Fossa)
Machine: Type: Desktop Mobo: Intel model: NUC5PPYB v: H76558-102 serial: <filter> UEFI [Legacy]: Intel
v: PYBSWCEL.86A.0031.2015.0601.1712 date: 06/01/2015
CPU: Topology: Quad Core model: Intel Pentium N3700 bits: 64 type: MCP arch: Airmont rev: 3 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 12800
Speed: 480 MHz min/max: 480/2400 MHz Core speeds (MHz): 1: 940 2: 517 3: 640 4: 645
Graphics: Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics driver: i915 v: kernel
bus ID: 00:02.0
Display: server: X.Org 1.20.9 driver: intel unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 405 (BSW) v: 4.6 Mesa 20.2.6 direct render: Yes
Audio: Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio
driver: snd_hda_intel v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k5.4.0-72-generic
Network: Device-1: Intel Wireless 3165 driver: iwlwifi v: kernel port: f040 bus ID: 02:00.0
IF: wlan0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Intel driver: r8169 v: kernel port: e000
bus ID: 03:00.0
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 8.48 TiB used: 3.70 TiB (43.7%)
ID-1: /dev/sda vendor: Western Digital model: WD3200BPVT-80JJ5T0 size: 298.09 GiB temp: 36 C
ID-2: /dev/sdb type: USB vendor: Western Digital model: WD My Passport 25E2 size: 3.64 TiB
ID-3: /dev/sdc type: USB vendor: Western Digital model: WD My Passport 2627 size: 4.55 TiB
Partition: ID-1: / size: 285.49 GiB used: 41.73 GiB (14.6%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 7.92 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5
Sensors: System Temperatures: cpu: 40.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 238 Uptime: 48m Memory: 7.70 GiB used: 1.48 GiB (19.2%) Init: systemd runlevel: 5 Compilers: gcc: 9.3.0
Shell: bash v: 5.0.17 inxi: 3.0.38 $ sudo smartctl -s on -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-72-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA (AF)
Device Model: WDC WD3200BPVT-80JJ5T0
Serial Number: WD-WXS1E32SPVZA
LU WWN Device Id: 5 0014ee 602af4e40
Firmware Version: 01.01A01
User Capacity: 320072933376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue May 4 14:59:22 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7260) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 75) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 141 135 021 Pre-fail Always - 1925
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3086
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 046 046 000 Old_age Always - 39695
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2616
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 914337
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 323
193 Load_Cycle_Count 0x0032 192 192 000 Old_age Always - 24044
194 Temperature_Celsius 0x0022 107 090 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.$ sudo boot-info
boot-info-4ppa130 [20210504_1456]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> No boot loader is installed in the MBR of /dev/sdb.
=> No boot loader is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
================================ 1 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 20.04.2 LTS CurrentSession on sda1
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-72-generic root=UUID=671a7b4a-b8e8-4c19-8037-fdb97a806338 ro quiet splash vt.handoff=7
===================================== UEFI =====================================
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.015880] ACPI: UEFI 0x000000007B143CC8 000042 (v01 INTEL NUC5PPYB 0000001F 00000000)
[ 0.929540] fb0: EFI VGA frame buffer device
[ 27.544140] fb0: switching to inteldrmfb from EFI VGA
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : is-GPT, no-BIOSboot, has-noESP, usb-disk, not-mmc, no-os, 2048 sectors * 512 bytes
sdc : is-GPT, no-BIOSboot, has-noESP, usb-disk, not-mmc, no-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
sdb1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdc1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
sda1 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sdb1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdc1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdc
fdisk -l (filtered): ___________________________________________________________
Disk sda: 298.9 GiB, 320072933376 bytes, 625142448 sectors
Disk identifier: 0x000387db
Boot Start End Sectors Size Id Type
sda1 * 2048 608528383 608526336 290.2G 83 Linux
sda2 608530430 625141759 16611330 7.9G 5 Extended
sda5 608530432 625141759 16611328 7.9G 82 Linux swap / Solaris
Disk sdb: 3.65 TiB, 4000752599040 bytes, 7813969920 sectors
Disk identifier: 1E636942-D073-43C2-9BB5-3438D4627255
Start End Sectors Size Type
sdb1 2048 7813967871 7813965824 3.7T Linux filesystem
Disk sdc: 4.56 TiB, 5000947302400 bytes, 9767475200 sectors
Disk identifier: F544A07E-5A3E-4780-A4BD-A113341C8BBF
Start End Sectors Size Type
sdc1 2048 9767473151 9767471104 4.6T Linux filesystem
parted -lm (filtered): _________________________________________________________
sda:320GB:scsi:512:4096:msdos:ATA WDC WD3200BPVT-8:;
1:1049kB:312GB:312GB:ext4::boot;
2:312GB:320GB:8505MB:::;
5:312GB:320GB:8505MB:linux-swap(v1)::;
sdb:4001GB:scsi:512:4096:gpt:WD My Passport 25E2:;
1:1049kB:4001GB:4001GB:ext4:My Passport:;
sdc:5001GB:scsi:512:4096:gpt:WD My Passport 2627:;
1:1049kB:5001GB:5001GB:ext4:My Passport:;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ext4 671a7b4a-b8e8-4c19-8037-fdb97a806338 000387db-01
├─sda2 000387db-02
└─sda5 swap 55d73341-6618-4f85-8ef6-bd542bbf26ca 000387db-05
sdb
└─sdb1 ext4 23201e6b-b1d5-4432-a6b7-9cf5b914007b 6ac7ac3e-98f8-4749-ae82-c8bbea9589fa SAUVEGARDE My Passport
sdc
└─sdc1 ext4 141bec29-8ec6-4ab5-9f7e-bba5e62abbe6 35484009-d3a8-4b02-bb77-d6812473343a DONNEES My Passport
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 229.2G 15% /
sdb1 1.1T 65% /media/csbobillier/SAUVEGARDE
sdc1 3T 29% /media/csbobillier/DONNEES
Mount options: __________________________________________________________________
sda1 rw,relatime,errors=remount-ro
sdb1 rw,nosuid,nodev,relatime
sdc1 rw,nosuid,nodev,relatime
====================== sda1/boot/grub/grub.cfg (filtered) ======================
Ubuntu 671a7b4a-b8e8-4c19-8037-fdb97a806338
Ubuntu, avec Linux 5.4.0-72-generic 671a7b4a-b8e8-4c19-8037-fdb97a806338
Ubuntu, avec Linux 5.4.0-71-generic 671a7b4a-b8e8-4c19-8037-fdb97a806338
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sda1/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=671a7b4a-b8e8-4c19-8037-fdb97a806338 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=55d73341-6618-4f85-8ef6-bd542bbf26ca none swap sw 0 0
======================= sda1/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
212,524456024 = 228,196397056 boot/grub/grub.cfg 2
214,149658203 = 229,941444608 boot/grub/i386-pc/core.img 1
226,207241058 = 242,888175616 boot/vmlinuz 1
192,719722748 = 206,931226624 boot/vmlinuz-5.4.0-71-generic 4
226,207241058 = 242,888175616 boot/vmlinuz-5.4.0-72-generic 1
192,719722748 = 206,931226624 boot/vmlinuz.old 4
8,454097748 = 9,077518336 boot/initrd.img 2
1,137619019 = 1,221509120 boot/initrd.img-5.4.0-71-generic 4
8,454097748 = 9,077518336 boot/initrd.img-5.4.0-72-generic 2
1,137619019 = 1,221509120 boot/initrd.img.old 4
===================== sda1: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 17622 oct. 1 2020 10_linux
-rwxr-xr-x 1 root root 42359 oct. 1 2020 10_linux_zfs
-rwxr-xr-x 1 root root 12894 oct. 1 2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 juil. 17 2018 30_os-prober
-rwxr-xr-x 1 root root 1424 oct. 1 2020 30_uefi-firmware
-rwxr-xr-x 1 root root 214 déc. 17 2015 40_custom
-rwxr-xr-x 1 root root 216 déc. 17 2015 41_custom
========= Devices which don't seem to have a corresponding hard drive ==========
sdd
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub2 of
sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your BIOS boot on sda (ATA WDC WD3200BPVT-8) disk!$ sudo journalctl -e -S today -p err
-- Reboot --
mai 04 14:07:18 ordiBureau kernel: sd 2:0:0:0: [sdb] No Caching mode page found
mai 04 14:07:18 ordiBureau kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
mai 04 14:07:18 ordiBureau kernel: scsi 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
mai 04 14:07:18 ordiBureau kernel: scsi 2:0:0:1: Failed to get diagnostic page 0x1
mai 04 14:07:18 ordiBureau kernel: scsi 2:0:0:1: Failed to bind enclosure -19
mai 04 14:07:18 ordiBureau kernel: ses 3:0:0:1: Wrong diagnostic page; asked for 1 got 8
mai 04 14:07:18 ordiBureau kernel: ses 3:0:0:1: Failed to get diagnostic page 0x1
mai 04 14:07:18 ordiBureau kernel: ses 3:0:0:1: Failed to bind enclosure -19
mai 04 14:07:18 ordiBureau kernel: sd 3:0:0:0: [sdc] No Caching mode page found
mai 04 14:07:18 ordiBureau kernel: sd 3:0:0:0: [sdc] Assuming drive cache: write through
mai 04 14:07:26 ordiBureau systemd[1]: Failed to start Load AppArmor profiles.
mai 04 14:07:32 ordiBureau systemd[1]: Failed to start Load AppArmor profiles.
mai 04 14:07:36 ordiBureau systemd[1]: Failed to start Load AppArmor profiles.
mai 04 14:07:52 ordiBureau bandwidthd[1207]: eth0: That device is not up
mai 04 14:07:52 ordiBureau bandwidthd[1208]: eth0: That device is not up
mai 04 14:07:52 ordiBureau bandwidthd[1209]: eth0: That device is not up
mai 04 14:07:52 ordiBureau bandwidthd[1210]: eth0: That device is not up
mai 04 14:08:32 ordiBureau pulseaudio[1404]: GetManagedObjects() failed: org.freedesktop.systemd1.NoSuchUnit: Unit dbus-org.bluez.service not found.Il y a des éléments étonnants que je repère dans ces retours de commande, mais sans trop savoir quoi en faire:
- dans dmesg, il y a pas mal de 'trous': 5sec à 6.069744, 6sec à 13.2, 5sec à 20.2, et surtout 24sec à 32.4 et enfin 140sec à 61.3
- dans smartctl la valeur élevée de G-Sense_Error_Rate : 914337 !
Avez-vous des suggestions logicielles à me proposer ? Est-ce que c'est en fait mon disque dur qui a besoin d'être changé ?
Merci par avance pour votre aide !
DonLope
Dernière modification par DonLope (Le 08/05/2021, à 17:59)
Hors ligne
#2 Le 04/05/2021, à 17:00
- lucmars
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Ton dd aurait été pas mal secoué, pour moi c'est plus un signal de fin de vie que la cause du problème. Car les mises à niveau ne sont pas toujours heureuses et à un moment donnée mieux vaut une installe fraiche.
Donc tant qu'à faire, si on ne parie pas sur la longévité du dd : faire une installe fraiche sur ssd usb3 (si t'as un port usb3 sur le nuc).
C'est une idée.
Gaulois Matter !
Hors ligne
#3 Le 04/05/2021, à 18:09
- geole
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Bonjour
Merci pour la totalité. Tout semble bon, La grosse anomalie est la
[ 61.312785] usblp 1-4.1:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0881
[ 204.674539] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 204.708964] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)et
ID-2: /dev/sdb type: USB vendor: Western Digital model: WD My Passport 25E2 size: 3.64 TiB
ID-3: /dev/sdc type: USB vendor: Western Digital model: WD My Passport 2627 size: 4.55 TiB Si tu pouvais débrancher ces deux énormes disques pour voir s'ils sont en cause.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#4 Le 04/05/2021, à 18:53
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Merci pour vos deux réponses.
Le changement pour un SSD est peut-être une bonne piste en effet. Mais je voudrais d'abord voir s'il est possible d'améliorer sans hardware (ne serait-ce que pour comprendre...)
Pour répondre à geole:
Alors en débranchant les deux disques durs, l'ordinateur a démarré en... 4min10sec ! En gros, aucun changement 
Voilà le retour des commandes illustrant ce démarrage:
$ systemd-analyze
Startup finished in 5.046s (kernel) + 1min 27.363s (userspace) = 1min 32.409s
graphical.target reached after 1min 14.473s in userspace$ systemd-analyze blame
30.915s apport-autoreport.service >
23.092s systemd-journal-flush.service >
23.007s networkd-dispatcher.service >
19.672s udisks2.service >
19.638s dev-sda1.device >
18.719s accounts-daemon.service >
13.213s dev-loop6.device >
13.111s dev-loop1.device >
13.110s dev-loop0.device >
13.109s dev-loop2.device >
13.105s dev-loop3.device >
13.101s dev-loop4.device >
13.099s dev-loop5.device >
12.913s dev-loop8.device >
12.354s avahi-daemon.service >
12.161s NetworkManager.service >
11.339s NetworkManager-wait-online.service >
10.799s switcheroo-control.service >
10.773s thermald.service >
10.765s systemd-logind.service >
10.758s wpa_supplicant.service >
10.215s bandwidthd.service >
10.214s nmbd.service >
10.200s dev-loop7.device >
7.831s smbd.service >
6.718s smartmontools.service >
6.235s systemd-udevd.service >
5.012s systemd-resolved.service >
4.341s grub-common.service >
4.300s rsyslog.service >
4.192s gpu-manager.service >
3.459s apport.service >
3.417s networking.service >
3.415s plymouth-read-write.service >
3.210s user@1000.service >
3.134s gdm.service >
2.119s colord.service >
1.983s packagekit.service >
1.734s keyboard-setup.service >
1.627s atd.service >
1.485s systemd-sysusers.service >
1.386s kerneloops.service >
1.382s e2scrub_reap.service >
1.360s lm-sensors.service >
1.359s systemd-tmpfiles-setup.service >
1.338s polkit.service >
1.329s snap-core-10958.mount >
1.279s systemd-modules-load.service >
1.258s snap-core18-1997.mount >
1.152s systemd-random-seed.service >
1.072s snap-gnome\x2d3\x2d26\x2d1604-102.mount >
1.029s systemd-sysctl.service >
932ms systemd-tmpfiles-setup-dev.service >
932ms systemd-journald.service >
932ms grub-initrd-fallback.service >
886ms snap-gnome\x2d3\x2d28\x2d1804-145.mount >
881ms systemd-udev-trigger.service >
864ms modprobe@drm.service >
851ms plymouth-start.service >
831ms upower.service >
708ms snap-gnome\x2d3\x2d34\x2d1804-66.mount >
673ms systemd-rfkill.service >
654ms binfmt-support.service >
565ms snap-gnome\x2dsystem\x2dmonitor-157.mount >
530ms sabnzbdplus.service >
485ms kmod-static-nodes.service >
424ms dev-hugepages.mount >
421ms dev-mqueue.mount >
418ms sys-kernel-debug.mount >
415ms sys-kernel-tracing.mount >
364ms snap-gtk\x2dcommon\x2dthemes-1515.mount >
337ms ifupdown-pre.service >
332ms ufw.service >
328ms console-setup.service >
324ms systemd-timesyncd.service >
284ms dev-disk-by\x2duuid-55d73341\x2d6618\x2d4f85\x2d8ef6\x2dbd542bbf26ca.sw>
267ms snap-snap\x2dstore-518.mount >
229ms apparmor.service >
224ms hddtemp.service >
211ms openvpn.service >
208ms snap-sweethome3d\x2dhomedesign-13.mount >
206ms proc-sys-fs-binfmt_misc.mount >
205ms systemd-user-sessions.service >
186ms systemd-remount-fs.service >
169ms setvtrgb.service >
128ms user-runtime-dir@1000.service >
117ms rtkit-daemon.service >
78ms systemd-update-utmp.service >
62ms resolvconf-pull-resolved.service >
50ms alsa-restore.service >
28ms systemd-update-utmp-runlevel.service >
11ms sys-fs-fuse-connections.mount >
8ms sys-kernel-config.mount $ systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @1min 14.473s
└─multi-user.target @1min 14.471s
└─smbd.service @1min 6.636s +7.831s
└─nmbd.service @56.418s +10.214s
└─network-online.target @56.247s
└─NetworkManager-wait-online.service @44.905s +11.339s
└─NetworkManager.service @32.738s +12.161s
└─dbus.service @32.722s
└─basic.target @32.282s
└─sockets.target @32.282s
└─uuidd.socket @32.282s
└─sysinit.target @32.058s
└─systemd-timesyncd.service @31.733s +324ms
└─systemd-tmpfiles-setup.service @30.353s +1.359s
└─systemd-journal-flush.service @7.257s +23.092s
└─systemd-journald.service @6.321s +932ms
└─systemd-journald.socket @6.303s
└─-.mount @6.272s
└─system.slice @6.272s
└─-.slice @6.272s$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x368, date = 2019-04-23
[ 0.000000] Linux version 5.4.0-72-generic (buildd@lcy01-amd64-019) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #80-Ubuntu SMP Mon Apr 12 17:35:00 UTC 2021 (Ubuntu 5.4.0-72.80-generic 5.4.101)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-72-generic root=UUID=671a7b4a-b8e8-4c19-8037-fdb97a806338 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007b0b4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b0b5000-0x000000007b134fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b135000-0x000000007b145fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007b146000-0x000000007b63cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b63d000-0x000000007b949fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b94a000-0x000000007bb18fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bb19000-0x000000007bfc4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bfc5000-0x000000007bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: /NUC5PPYB, BIOS PYBSWCEL.86A.0031.2015.0601.1712 06/01/2015
[ 0.000000] tsc: Detected 1600.000 MHz processor
[ 0.005301] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005306] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.005323] last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.005331] MTRR default type: uncachable
[ 0.005334] MTRR fixed ranges enabled:
[ 0.005338] 00000-9FFFF write-back
[ 0.005340] A0000-BFFFF uncachable
[ 0.005343] C0000-FFFFF write-protect
[ 0.005345] MTRR variable ranges enabled:
[ 0.005348] 0 base 000000000 mask F80000000 write-back
[ 0.005351] 1 base 07CB00000 mask FFFF00000 uncachable
[ 0.005354] 2 base 07CC00000 mask FFFC00000 uncachable
[ 0.005357] 3 base 07D000000 mask FFF000000 uncachable
[ 0.005360] 4 base 07E000000 mask FFE000000 uncachable
[ 0.005362] 5 base 100000000 mask F00000000 write-back
[ 0.005365] 6 base 200000000 mask F80000000 write-back
[ 0.005368] 7 disabled
[ 0.005486] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.005615] total RAM covered: 8139M
[ 0.006316] Found optimal setting for mtrr clean up
[ 0.006318] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
[ 0.006420] e820: update [mem 0x7cb00000-0xffffffff] usable ==> reserved
[ 0.006430] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.013779] found SMP MP-table at [mem 0x000fd830-0x000fd83f]
[ 0.014183] check: Scanning 1 areas for low memory corruption
[ 0.015136] RAMDISK: [mem 0x31edd000-0x34f65fff]
[ 0.015159] ACPI: Early table checksum verification disabled
[ 0.015167] ACPI: RSDP 0x00000000000F0580 000024 (v02 INTEL )
[ 0.015175] ACPI: XSDT 0x000000007B138080 000084 (v01 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015188] ACPI: FACP 0x000000007B142E90 00010C (v05 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015200] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20190816/tbfadt-564)
[ 0.015209] ACPI: DSDT 0x000000007B138198 00ACF8 (v02 INTEL NUC5PPYB 0000001F INTL 20120913)
[ 0.015219] ACPI: FACS 0x000000007B63CE80 000040
[ 0.015226] ACPI: APIC 0x000000007B142FA0 000084 (v03 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015235] ACPI: FPDT 0x000000007B143028 000044 (v01 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015243] ACPI: FIDT 0x000000007B143070 00009C (v01 INTEL NUC5PPYB 0000001F AMI 00010013)
[ 0.015250] ACPI: MCFG 0x000000007B143110 00003C (v01 INTEL NUC5PPYB 0000001F MSFT 00000097)
[ 0.015258] ACPI: SSDT 0x000000007B143150 000763 (v01 INTEL NUC5PPYB 0000001F INTL 20061109)
[ 0.015265] ACPI: SSDT 0x000000007B1438B8 000290 (v01 INTEL NUC5PPYB 0000001F INTL 20061109)
[ 0.015274] ACPI: SSDT 0x000000007B143B48 00017A (v01 INTEL NUC5PPYB 0000001F INTL 20061109)
[ 0.015282] ACPI: UEFI 0x000000007B143CC8 000042 (v01 INTEL NUC5PPYB 0000001F 00000000)
[ 0.015289] ACPI: LPIT 0x000000007B143D10 000104 (v01 INTEL NUC5PPYB 0000001F MSFT 0100000D)
[ 0.015297] ACPI: CSRT 0x000000007B143E18 00014C (v00 INTEL NUC5PPYB 0000001F MSFT 0100000D)
[ 0.015305] ACPI: SSDT 0x000000007B143F68 0011E6 (v01 INTEL NUC5PPYB 0000001F INTL 20061109)
[ 0.015328] ACPI: Local APIC address 0xfee00000
[ 0.015598] No NUMA configuration found
[ 0.015602] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.015629] NODE_DATA(0) allocated [mem 0x27ffd0000-0x27fffafff]
[ 0.016485] Zone ranges:
[ 0.016489] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.016493] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.016497] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.016501] Device empty
[ 0.016503] Movable zone start for each node
[ 0.016512] Early memory node ranges
[ 0.016514] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.016517] node 0: [mem 0x0000000000100000-0x000000003fffffff]
[ 0.016519] node 0: [mem 0x0000000040200000-0x000000007b0b4fff]
[ 0.016522] node 0: [mem 0x000000007b94a000-0x000000007bb18fff]
[ 0.016524] node 0: [mem 0x000000007bfc5000-0x000000007bffffff]
[ 0.016526] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.016962] Zeroed struct page in unavailable ranges: 20389 pages
[ 0.016967] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.016971] On node 0 totalpages: 2076763
[ 0.016974] DMA zone: 64 pages used for memmap
[ 0.016976] DMA zone: 21 pages reserved
[ 0.016978] DMA zone: 3996 pages, LIFO batch:0
[ 0.017132] DMA32 zone: 7811 pages used for memmap
[ 0.017134] DMA32 zone: 499903 pages, LIFO batch:63
[ 0.042507] Normal zone: 24576 pages used for memmap
[ 0.042509] Normal zone: 1572864 pages, LIFO batch:63
[ 0.098562] Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff]
[ 0.099070] ACPI: PM-Timer IO Port: 0x408
[ 0.099077] ACPI: Local APIC address 0xfee00000
[ 0.099097] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.099102] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.099104] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.099106] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.099128] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.099134] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.099138] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.099142] ACPI: IRQ0 used by override.
[ 0.099145] ACPI: IRQ9 used by override.
[ 0.099149] Using ACPI (MADT) for SMP configuration information
[ 0.099153] TSC deadline timer available
[ 0.099156] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.099207] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.099212] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.099213] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.099215] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.099217] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.099221] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.099226] PM: Registered nosave memory: [mem 0x7b0b5000-0x7b134fff]
[ 0.099228] PM: Registered nosave memory: [mem 0x7b135000-0x7b145fff]
[ 0.099229] PM: Registered nosave memory: [mem 0x7b146000-0x7b63cfff]
[ 0.099231] PM: Registered nosave memory: [mem 0x7b63d000-0x7b949fff]
[ 0.099235] PM: Registered nosave memory: [mem 0x7bb19000-0x7bfc4fff]
[ 0.099240] PM: Registered nosave memory: [mem 0x7c000000-0x7cefffff]
[ 0.099241] PM: Registered nosave memory: [mem 0x7cf00000-0x7eefffff]
[ 0.099243] PM: Registered nosave memory: [mem 0x7ef00000-0xe00f7fff]
[ 0.099245] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.099247] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.099248] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.099250] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
[ 0.099252] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.099253] PM: Registered nosave memory: [mem 0xfed09000-0xff97ffff]
[ 0.099255] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.099259] [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[ 0.099261] Booting paravirtualized kernel on bare hardware
[ 0.099268] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.099287] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.100264] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288
[ 0.100289] pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152
[ 0.100292] pcpu-alloc: [0] 0 1 2 3
[ 0.100384] Built 1 zonelists, mobility grouping on. Total pages: 2044291
[ 0.100387] Policy zone: Normal
[ 0.100391] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-72-generic root=UUID=671a7b4a-b8e8-4c19-8037-fdb97a806338 ro quiet splash vt.handoff=7
[ 0.103195] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.104527] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.104612] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.126044] Calgary: detecting Calgary via BIOS EBDA area
[ 0.126047] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.190308] Memory: 8014040K/8307052K available (14339K kernel code, 2400K rwdata, 5008K rodata, 2732K init, 4972K bss, 293012K reserved, 0K cma-reserved)
[ 0.190323] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.190791] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.190836] Kernel/User page tables isolation: enabled
[ 0.190875] ftrace: allocating 44576 entries in 175 pages
[ 0.226174] rcu: Hierarchical RCU implementation.
[ 0.226179] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.226180] Tasks RCU enabled.
[ 0.226182] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.226184] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.235650] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.236208] random: crng done (trusting CPU's manufacturer)
[ 0.236263] spurious 8259A interrupt: IRQ7.
[ 0.236288] vt handoff: transparent VT on vt#7
[ 0.236309] Console: colour dummy device 80x25
[ 0.236316] printk: console [tty0] enabled
[ 0.236377] ACPI: Core revision 20190816
[ 0.236622] APIC: Switch to symmetric I/O mode setup
[ 0.237937] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.237949] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[ 0.237954] pid_max: default: 32768 minimum: 301
[ 0.238069] LSM: Security Framework initializing
[ 0.238103] Yama: becoming mindful.
[ 0.238186] AppArmor: AppArmor initialized
[ 0.238320] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.238361] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.238406] *** VALIDATE tmpfs ***
[ 0.238827] *** VALIDATE proc ***
[ 0.238998] *** VALIDATE cgroup1 ***
[ 0.239004] *** VALIDATE cgroup2 ***
[ 0.239128] process: using mwait in idle threads
[ 0.239135] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.239138] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.239146] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.239151] Spectre V2 : Mitigation: Full generic retpoline
[ 0.239153] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.239154] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.239158] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.239163] MDS: Mitigation: Clear CPU buffers
[ 0.239516] Freeing SMP alternatives memory: 40K
[ 0.241943] smpboot: CPU0: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[ 0.241943] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.241943] ... version: 3
[ 0.241943] ... bit width: 40
[ 0.241943] ... generic registers: 2
[ 0.241943] ... value mask: 000000ffffffffff
[ 0.241943] ... max period: 0000007fffffffff
[ 0.241943] ... fixed-purpose events: 3
[ 0.241943] ... event mask: 0000000700000003
[ 0.241943] rcu: Hierarchical SRCU implementation.
[ 0.241943] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.241943] smp: Bringing up secondary CPUs ...
[ 0.241943] x86: Booting SMP configuration:
[ 0.241943] .... node #0, CPUs: #1 #2 #3
[ 0.246521] smp: Brought up 1 node, 4 CPUs
[ 0.246521] smpboot: Max logical packages: 1
[ 0.246521] smpboot: Total of 4 processors activated (12800.00 BogoMIPS)
[ 0.247833] devtmpfs: initialized
[ 0.247833] x86/mm: Memory block size: 128MB
[ 0.251923] PM: Registering ACPI NVS region [mem 0x7b146000-0x7b63cfff] (5206016 bytes)
[ 0.251923] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.251923] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.251923] pinctrl core: initialized pinctrl subsystem
[ 0.251923] PM: RTC time: 16:37:58, date: 2021-05-04
[ 0.251923] NET: Registered protocol family 16
[ 0.251923] audit: initializing netlink subsys (disabled)
[ 0.251923] audit: type=2000 audit(1620146278.012:1): state=initialized audit_enabled=0 res=1
[ 0.254131] EISA bus registered
[ 0.254158] cpuidle: using governor ladder
[ 0.254172] cpuidle: using governor menu
[ 0.254284] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.254287] ACPI: bus type PCI registered
[ 0.254291] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.254479] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.254488] PCI: not using MMCONFIG
[ 0.254491] PCI: Using configuration type 1 for base access
[ 0.255646] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.260170] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.262199] ACPI: Added _OSI(Module Device)
[ 0.262202] ACPI: Added _OSI(Processor Device)
[ 0.262203] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.262205] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.262209] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.262211] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.262215] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.292892] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.299231] ACPI: Dynamic OEM Table Load:
[ 0.299250] ACPI: SSDT 0xFFFF916BF6B1D800 000697 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.299250] ACPI: Dynamic OEM Table Load:
[ 0.299250] ACPI: SSDT 0xFFFF916BF6342800 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.302482] ACPI: Dynamic OEM Table Load:
[ 0.302496] ACPI: SSDT 0xFFFF916BF633E600 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.306298] ACPI: Dynamic OEM Table Load:
[ 0.306311] ACPI: SSDT 0xFFFF916BF615CA80 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.315821] ACPI: Interpreter enabled
[ 0.315897] ACPI: (supports S0 S3 S4 S5)
[ 0.315902] ACPI: Using IOAPIC for interrupt routing
[ 0.316021] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.321251] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.321298] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.322859] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.334647] ACPI: Power Resource [USBC] (on)
[ 0.349992] ACPI: Power Resource [CLK0] (off)
[ 0.350940] ACPI: Power Resource [CLK0] (off)
[ 0.351103] ACPI: Power Resource [CLK1] (off)
[ 0.367640] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.367659] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.367863] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.369746] PCI host bridge to bus 0000:00
[ 0.369754] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.369758] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.369762] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.369765] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.369769] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.369772] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.369776] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.369779] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.369784] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.369815] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.370477] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.370510] pci 0000:00:02.0: reg 0x10: [mem 0x88000000-0x88ffffff 64bit]
[ 0.370523] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x87ffffff 64bit pref]
[ 0.370535] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.371050] pci 0000:00:12.0: [8086:2296] type 00 class 0x080501
[ 0.371081] pci 0000:00:12.0: reg 0x10: [mem 0x8941c000-0x8941cfff]
[ 0.371202] pci 0000:00:12.0: PME# supported from D0 D3hot
[ 0.371767] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.371839] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.371853] pci 0000:00:13.0: reg 0x24: [mem 0x8941b000-0x8941b7ff]
[ 0.371927] pci 0000:00:13.0: PME# supported from D3hot
[ 0.372354] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.372389] pci 0000:00:14.0: reg 0x10: [mem 0x89400000-0x8940ffff 64bit]
[ 0.372494] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.372981] pci 0000:00:18.0: [8086:22c0] type 00 class 0x080102
[ 0.373013] pci 0000:00:18.0: reg 0x10: [mem 0x89414000-0x89417fff]
[ 0.373539] pci 0000:00:18.6: [8086:22c6] type 00 class 0x0c8000
[ 0.373572] pci 0000:00:18.6: reg 0x10: [mem 0x8941a000-0x8941afff]
[ 0.374038] pci 0000:00:18.7: [8086:22c7] type 00 class 0x0c8000
[ 0.374071] pci 0000:00:18.7: reg 0x10: [mem 0x89419000-0x89419fff]
[ 0.374534] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.374564] pci 0000:00:1a.0: reg 0x10: [mem 0x89100000-0x891fffff]
[ 0.374578] pci 0000:00:1a.0: reg 0x14: [mem 0x89000000-0x890fffff]
[ 0.374683] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.375117] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.375159] pci 0000:00:1b.0: reg 0x10: [mem 0x89410000-0x89413fff 64bit]
[ 0.375278] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.375707] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.375866] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.376313] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[ 0.376466] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.376948] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[ 0.377098] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.377582] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.378129] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.378202] pci 0000:00:1f.3: reg 0x10: [mem 0x89418000-0x8941801f]
[ 0.378319] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.379025] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.379814] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[ 0.380865] pci 0000:02:00.0: reg 0x10: [mem 0x89300000-0x89301fff 64bit]
[ 0.384533] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.386346] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.386356] pci 0000:00:1c.1: bridge window [mem 0x89300000-0x893fffff]
[ 0.386533] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.386578] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.386617] pci 0000:03:00.0: reg 0x18: [mem 0x89204000-0x89204fff 64bit]
[ 0.386643] pci 0000:03:00.0: reg 0x20: [mem 0x89200000-0x89203fff 64bit]
[ 0.386802] pci 0000:03:00.0: supports D1 D2
[ 0.386805] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.387104] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.387111] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.387119] pci 0000:00:1c.2: bridge window [mem 0x89200000-0x892fffff]
[ 0.392174] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.392488] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.392798] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.393104] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.393414] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.393728] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.394053] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.394354] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.398864] iommu: Default domain type: Translated
[ 0.398864] SCSI subsystem initialized
[ 0.398864] libata version 3.00 loaded.
[ 0.398864] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.398864] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.398864] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.398864] vgaarb: loaded
[ 0.398864] ACPI: bus type USB registered
[ 0.398864] usbcore: registered new interface driver usbfs
[ 0.398864] usbcore: registered new interface driver hub
[ 0.398864] usbcore: registered new device driver usb
[ 0.398864] pps_core: LinuxPPS API ver. 1 registered
[ 0.398864] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.398864] PTP clock support registered
[ 0.398864] EDAC MC: Ver: 3.0.0
[ 0.398864] PCI: Using ACPI for IRQ routing
[ 0.409349] PCI: pci_cache_line_size set to 64 bytes
[ 0.409756] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.409761] e820: reserve RAM buffer [mem 0x7b0b5000-0x7bffffff]
[ 0.409764] e820: reserve RAM buffer [mem 0x7bb19000-0x7bffffff]
[ 0.410073] NetLabel: Initializing
[ 0.410075] NetLabel: domain hash size = 128
[ 0.410077] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.410114] NetLabel: unlabeled traffic allowed by default
[ 0.415930] clocksource: Switched to clocksource tsc-early
[ 0.460191] *** VALIDATE bpf ***
[ 0.460353] VFS: Disk quotas dquot_6.6.0
[ 0.460397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460460] *** VALIDATE ramfs ***
[ 0.460476] *** VALIDATE hugetlbfs ***
[ 0.460744] AppArmor: AppArmor Filesystem Enabled
[ 0.460828] pnp: PnP ACPI init
[ 0.460990] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.461523] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.461528] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.461532] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.461551] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462278] system 00:02: [io 0x0a00-0x0a2f] has been reserved
[ 0.462283] system 00:02: [io 0x0a30-0x0a3f] has been reserved
[ 0.462287] system 00:02: [io 0x0a40-0x0a4f] has been reserved
[ 0.462300] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.463714] pnp 00:03: [dma 0 disabled]
[ 0.463817] pnp 00:03: Plug and Play ACPI device, IDs ITE8713 (active)
[ 0.469076] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.469239] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.469244] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.469250] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.469254] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.469257] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.469261] system 00:05: [mem 0xfed08000-0xfed09fff] could not be reserved
[ 0.469266] system 00:05: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 0.469269] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.469274] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.469286] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.470761] pnp: PnP ACPI: found 6 devices
[ 0.476781] thermal_sys: Registered thermal governor 'fair_share'
[ 0.476784] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.476787] thermal_sys: Registered thermal governor 'step_wise'
[ 0.476788] thermal_sys: Registered thermal governor 'user_space'
[ 0.476790] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.481397] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.481515] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.481524] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.481528] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.481552] pci 0000:00:1c.0: BAR 14: assigned [mem 0x89500000-0x896fffff]
[ 0.481564] pci 0000:00:1c.0: BAR 15: assigned [mem 0x89700000-0x898fffff 64bit pref]
[ 0.481571] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.481581] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.481589] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.481601] pci 0000:00:1c.0: bridge window [mem 0x89500000-0x896fffff]
[ 0.481607] pci 0000:00:1c.0: bridge window [mem 0x89700000-0x898fffff 64bit pref]
[ 0.481618] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.481625] pci 0000:00:1c.1: bridge window [mem 0x89300000-0x893fffff]
[ 0.481638] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.481642] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.481650] pci 0000:00:1c.2: bridge window [mem 0x89200000-0x892fffff]
[ 0.481664] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.481669] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.481673] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.481676] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.481679] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.481683] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.481686] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.481689] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[ 0.481693] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.481696] pci_bus 0000:01: resource 1 [mem 0x89500000-0x896fffff]
[ 0.481700] pci_bus 0000:01: resource 2 [mem 0x89700000-0x898fffff 64bit pref]
[ 0.481704] pci_bus 0000:02: resource 1 [mem 0x89300000-0x893fffff]
[ 0.481708] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.481712] pci_bus 0000:03: resource 1 [mem 0x89200000-0x892fffff]
[ 0.482187] NET: Registered protocol family 2
[ 0.482646] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.482831] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.483362] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.483743] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.483919] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.484038] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.484254] NET: Registered protocol family 1
[ 0.484269] NET: Registered protocol family 44
[ 0.484305] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.485122] PCI: CLS 0 bytes, default 64
[ 0.485276] Trying to unpack rootfs image as initramfs...
[ 0.910954] Freeing initrd memory: 49700K
[ 0.910961] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.910965] software IO TLB: mapped [mem 0x770b5000-0x7b0b5000] (64MB)
[ 0.911084] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[ 0.911136] clocksource: Switched to clocksource tsc
[ 0.911247] check: Scanning for low memory corruption every 60 seconds
[ 0.912436] Initialise system trusted keyrings
[ 0.912471] Key type blacklist registered
[ 0.912586] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.916735] zbud: loaded
[ 0.917846] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.918443] fuse: init (API version 7.31)
[ 0.918494] *** VALIDATE fuse ***
[ 0.918499] *** VALIDATE fuse ***
[ 0.918821] Platform Keyring initialized
[ 0.925710] Key type asymmetric registered
[ 0.925713] Asymmetric key parser 'x509' registered
[ 0.925734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.925822] io scheduler mq-deadline registered
[ 0.927360] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.927534] efifb: probing for efifb
[ 0.927558] efifb: No BGRT, not showing boot graphics
[ 0.927561] efifb: framebuffer at 0xa0000, using 64k, total 64k
[ 0.927564] efifb: mode is 640x480x1, linelength=80, pages=1
[ 0.927566] efifb: scrolling: redraw
[ 0.927569] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.927693] fbcon: Deferring console take-over
[ 0.927696] fb0: EFI VGA frame buffer device
[ 0.927721] intel_idle: MWAIT substates: 0x33000020
[ 0.927724] intel_idle: v0.4.1 model 0x4C
[ 0.928292] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.928638] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.928693] ACPI: Lid Switch [LID0]
[ 0.928809] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.928871] ACPI: Sleep Button [SLPB]
[ 0.928978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.929076] ACPI: Power Button [PWRF]
[ 0.937577] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.957062] hpet: number irqs doesn't agree with number of timers
[ 0.957545] Linux agpgart interface v0.103
[ 0.968116] loop: module loaded
[ 0.969371] libphy: Fixed MDIO Bus: probed
[ 0.969375] tun: Universal TUN/TAP device driver, 1.6
[ 0.970242] PPP generic driver version 2.4.2
[ 0.971095] VFIO - User Level meta-driver version: 0.3
[ 0.971648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.971666] ehci-pci: EHCI PCI platform driver
[ 0.971704] ehci-platform: EHCI generic platform driver
[ 0.971732] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.971739] ohci-pci: OHCI PCI platform driver
[ 0.971762] ohci-platform: OHCI generic platform driver
[ 0.971781] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.972237] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.972255] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.973412] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[ 0.973550] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.974017] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.974023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.974027] usb usb1: Product: xHCI Host Controller
[ 0.974031] usb usb1: Manufacturer: Linux 5.4.0-72-generic xhci-hcd
[ 0.974034] usb usb1: SerialNumber: 0000:00:14.0
[ 0.974733] hub 1-0:1.0: USB hub found
[ 0.974770] hub 1-0:1.0: 7 ports detected
[ 0.976598] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.976613] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.976626] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.976768] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.976772] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.976775] usb usb2: Product: xHCI Host Controller
[ 0.976778] usb usb2: Manufacturer: Linux 5.4.0-72-generic xhci-hcd
[ 0.976781] usb usb2: SerialNumber: 0000:00:14.0
[ 0.977868] hub 2-0:1.0: USB hub found
[ 0.977906] hub 2-0:1.0: 6 ports detected
[ 0.979618] i8042: PNP: No PS/2 controller found.
[ 0.981152] mousedev: PS/2 mouse device common for all mice
[ 0.983303] rtc_cmos 00:00: RTC can wake from S4
[ 0.984330] rtc_cmos 00:00: registered as rtc0
[ 0.984383] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram
[ 0.984414] i2c /dev entries driver
[ 0.984555] device-mapper: uevent: version 1.0.3
[ 0.985317] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.985426] platform eisa.0: Probing EISA bus 0
[ 0.985431] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.985436] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.985440] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.985443] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.985446] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.985449] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.985452] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.985455] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.985458] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.985461] platform eisa.0: EISA: Detected 0 cards
[ 0.985470] intel_pstate: Intel P-state driver initializing
[ 0.987029] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.987287] drop_monitor: Initializing network drop monitor service
[ 0.987627] NET: Registered protocol family 10
[ 1.008986] Segment Routing with IPv6
[ 1.009032] NET: Registered protocol family 17
[ 1.009349] Key type dns_resolver registered
[ 1.011029] RAS: Correctable Errors collector initialized.
[ 1.011093] microcode: sig=0x406c3, pf=0x1, revision=0x368
[ 1.011721] microcode: Microcode Update Driver: v2.2.
[ 1.011729] IPI shorthand broadcast: enabled
[ 1.011749] sched_clock: Marking stable (1009813875, 1894650)->(1022835037, -11126512)
[ 1.012323] registered taskstats version 1
[ 1.012343] Loading compiled-in X.509 certificates
[ 1.014239] Loaded X.509 cert 'Build time autogenerated kernel key: f55c4634ad654377a9ba7bad1ef0d32977b1cff1'
[ 1.015693] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.017149] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.017223] zswap: loaded using pool lzo/zbud
[ 1.017746] Key type ._fscrypt registered
[ 1.017747] Key type .fscrypt registered
[ 1.039069] Key type big_key registered
[ 1.049472] Key type encrypted registered
[ 1.049480] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.049499] ima: No TPM chip found, activating TPM-bypass!
[ 1.049518] ima: Allocated hash algorithm: sha1
[ 1.049534] ima: No architecture policies found
[ 1.049554] evm: Initialising EVM extended attributes:
[ 1.049556] evm: security.selinux
[ 1.049557] evm: security.SMACK64
[ 1.049558] evm: security.SMACK64EXEC
[ 1.049559] evm: security.SMACK64TRANSMUTE
[ 1.049560] evm: security.SMACK64MMAP
[ 1.049562] evm: security.apparmor
[ 1.049563] evm: security.ima
[ 1.049564] evm: security.capability
[ 1.049565] evm: HMAC attrs: 0x1
[ 1.050847] PM: Magic number: 5:571:640
[ 1.051355] rtc_cmos 00:00: setting system clock to 2021-05-04T16:37:59 UTC (1620146279)
[ 1.061392] Freeing unused decrypted memory: 2040K
[ 1.063052] Freeing unused kernel image memory: 2732K
[ 1.078538] Write protecting the kernel read-only data: 22528k
[ 1.080830] Freeing unused kernel image memory: 2008K
[ 1.082017] Freeing unused kernel image memory: 1136K
[ 1.105566] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.105839] x86/mm: Checking user space page tables
[ 1.129047] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.129052] Run /init as init process
[ 1.319198] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.355008] usb 2-4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21
[ 1.355014] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.355017] usb 2-4: Product: 4-Port USB 3.0 Hub
[ 1.355020] usb 2-4: Manufacturer: Generic
[ 1.364031] hub 2-4:1.0: USB hub found
[ 1.365588] hub 2-4:1.0: 4 ports detected
[ 1.467028] sdhci: Secure Digital Host Controller Interface driver
[ 1.467030] sdhci: Copyright(c) Pierre Ossman
[ 1.474000] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.506653] ahci 0000:00:13.0: version 3.0
[ 1.507055] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.507061] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
[ 1.508181] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.508514] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.508732] scsi host0: ahci
[ 1.509238] scsi host1: ahci
[ 1.509340] ata1: SATA max UDMA/133 abar m2048@0x8941b000 port 0x8941b100 irq 119
[ 1.509344] ata2: SATA max UDMA/133 abar m2048@0x8941b000 port 0x8941b180 irq 119
[ 1.510358] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:2296] (rev 21)
[ 1.512739] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[ 1.517469] mmc0: SDHCI controller on PCI [0000:00:12.0] using ADMA
[ 1.529152] libphy: r8169: probed
[ 1.529479] r8169 0000:03:00.0 eth0: RTL8168h/8111h, b8:ae:ed:78:1d:b9, XID 541, IRQ 120
[ 1.529483] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.628642] usb 1-1: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=23.01
[ 1.628647] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.628651] usb 1-1: Product: USB Receiver
[ 1.628655] usb 1-1: Manufacturer: Logitech
[ 1.758256] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.827079] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.827276] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.830631] ata1.00: ATA-8: WDC WD3200BPVT-80JJ5T0, 01.01A01, max UDMA/133
[ 1.830647] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.834902] ata1.00: configured for UDMA/133
[ 1.836283] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-8 1A01 PQ: 0 ANSI: 5
[ 1.836809] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.837460] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.837463] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.837498] sd 0:0:0:0: [sda] Write Protect is off
[ 1.837502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.837582] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.918250] sda: sda1 sda2 < sda5 >
[ 1.920735] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.922221] usb 1-4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21
[ 1.922224] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.922227] usb 1-4: Product: 4-Port USB 2.0 Hub
[ 1.922229] usb 1-4: Manufacturer: Generic
[ 1.923387] hub 1-4:1.0: USB hub found
[ 1.924472] hub 1-4:1.0: 4 ports detected
[ 2.054261] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 2.206201] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 2.206208] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.206211] usb 1-5: Product: USB2.0 Hub
[ 2.209307] hub 1-5:1.0: USB hub found
[ 2.209833] hub 1-5:1.0: 4 ports detected
[ 2.230255] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.237260] usbcore: registered new interface driver usbhid
[ 2.237263] usbhid: USB HID core driver
[ 2.244897] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C52E.0001/input/input3
[ 2.282434] usb 1-4.1: new high-speed USB device number 5 using xhci_hcd
[ 2.306456] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 2.306940] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52E.0002/input/input4
[ 2.307774] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52E.0002/input/input5
[ 2.366639] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C52E.0002/input/input6
[ 2.367827] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 2.396351] usb 1-4.1: New USB device found, idVendor=04b8, idProduct=0881, bcdDevice= 1.00
[ 2.396358] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.396362] usb 1-4.1: Product: EPSON Epson Stylus SX230 Series
[ 2.396367] usb 1-4.1: Manufacturer: EPSON
[ 2.396370] usb 1-4.1: SerialNumber: 4E3853593138353905
[ 2.425866] usb-storage 1-4.1:1.2: USB Mass Storage device detected
[ 2.427211] scsi host2: usb-storage 1-4.1:1.2
[ 2.427384] usbcore: registered new interface driver usb-storage
[ 2.430997] usbcore: registered new interface driver uas
[ 2.502102] usb 1-5.1: new full-speed USB device number 6 using xhci_hcd
[ 2.607131] usb 1-5.1: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 2.607138] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.640231] fbcon: Taking over console
[ 2.640395] Console: switching to colour frame buffer device 80x30
[ 2.759679] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.437580] scsi 2:0:0:0: Direct-Access EPSON Storage 1.00 PQ: 0 ANSI: 2
[ 3.439080] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.442600] sd 2:0:0:0: Power-on or device reset occurred
[ 3.471302] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 5.611662] systemd[1]: Inserted module 'autofs4'
[ 5.844696] systemd[1]: systemd 245.4-4ubuntu3.6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.862653] systemd[1]: Detected architecture x86-64.
[ 5.924993] systemd[1]: Set hostname to <ordiBureau>.
[ 11.325865] systemd[1]: Created slice system-modprobe.slice.
[ 11.326554] systemd[1]: Created slice User and Session Slice.
[ 11.326761] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.327328] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.327460] systemd[1]: Reached target User and Group Name Lookups.
[ 11.327498] systemd[1]: Reached target Remote File Systems.
[ 11.327536] systemd[1]: Reached target Slices.
[ 11.350108] systemd[1]: Listening on Syslog Socket.
[ 11.350506] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 11.350763] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.351329] systemd[1]: Listening on Journal Audit Socket.
[ 11.351562] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.351883] systemd[1]: Listening on Journal Socket.
[ 11.352166] systemd[1]: Listening on udev Control Socket.
[ 11.352334] systemd[1]: Listening on udev Kernel Socket.
[ 11.354850] systemd[1]: Mounting Huge Pages File System...
[ 11.358005] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.361212] systemd[1]: Mounting Kernel Debug File System...
[ 11.364283] systemd[1]: Mounting Kernel Trace File System...
[ 11.369158] systemd[1]: Starting Journal Service...
[ 11.372297] systemd[1]: Starting Set the console keyboard layout...
[ 11.375852] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 11.379474] systemd[1]: Starting Load Kernel Module drm...
[ 11.382653] systemd[1]: Started Nameserver information manager.
[ 11.383136] systemd[1]: Reached target Network (Pre).
[ 11.588696] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 11.588847] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 11.765510] systemd[1]: Starting Load Kernel Modules...
[ 11.768325] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.771145] systemd[1]: Starting udev Coldplug all Devices...
[ 11.774043] systemd[1]: Starting Uncomplicated firewall...
[ 11.779011] systemd[1]: Mounted Huge Pages File System.
[ 11.779342] systemd[1]: Mounted POSIX Message Queue File System.
[ 11.779647] systemd[1]: Mounted Kernel Debug File System.
[ 11.779921] systemd[1]: Mounted Kernel Trace File System.
[ 11.861760] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 11.950245] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.954496] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.099385] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 12.099550] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 12.102152] systemd[1]: Starting Load/Save Random Seed...
[ 12.104870] systemd[1]: Starting Create System Users...
[ 12.106754] systemd[1]: Finished Uncomplicated firewall.
[ 12.243612] systemd[1]: modprobe@drm.service: Succeeded.
[ 12.244522] systemd[1]: Finished Load Kernel Module drm.
[ 12.301661] systemd[1]: Started Journal Service.
[ 12.446761] systemd-journald[269]: Received client request to flush runtime journal.
[ 12.540597] lp: driver loaded but no devices found
[ 12.723193] ppdev: user-space parallel port driver
[ 18.952613] audit: type=1400 audit(1620146297.396:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=338 comm="apparmor_parser"
[ 19.007714] audit: type=1400 audit(1620146297.452:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=339 comm="apparmor_parser"
[ 19.059165] audit: type=1400 audit(1620146297.504:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=337 comm="apparmor_parser"
[ 19.187768] audit: type=1400 audit(1620146297.632:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=340 comm="apparmor_parser"
[ 19.187778] audit: type=1400 audit(1620146297.632:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=340 comm="apparmor_parser"
[ 19.662110] audit: type=1400 audit(1620146298.104:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=345 comm="apparmor_parser"
[ 19.704313] audit: type=1400 audit(1620146298.148:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=341 comm="apparmor_parser"
[ 19.958756] audit: type=1400 audit(1620146298.404:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=347 comm="apparmor_parser"
[ 19.958769] audit: type=1400 audit(1620146298.404:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=347 comm="apparmor_parser"
[ 19.976209] audit: type=1400 audit(1620146298.420:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=342 comm="apparmor_parser"
[ 24.201449] dw_dmac_pci 0000:00:18.0: DesignWare DMA Controller, 8 channels
[ 24.694854] ite_cir: Auto-detected model: ITE8713 CIR transceiver
[ 24.694856] ite_cir: Using model: ITE8713 CIR transceiver
[ 24.694858] ite_cir: TX-capable: 1
[ 24.694859] ite_cir: Sample period (ns): 8680
[ 24.694860] ite_cir: TX carrier frequency (Hz): 38000
[ 24.694862] ite_cir: TX duty cycle (%): 33
[ 24.694862] ite_cir: RX low carrier frequency (Hz): 0
[ 24.694863] ite_cir: RX high carrier frequency (Hz): 0
[ 24.886073] Registered IR keymap rc-rc6-mce
[ 24.970683] IR RC6 protocol handler initialized
[ 25.002049] rc rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0
[ 25.002140] rc rc0: lirc_dev: driver ite-cir registered at minor = 0, raw IR receiver, raw IR transmitter
[ 25.002208] input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input9
[ 25.003504] ite_cir: driver has been successfully loaded
[ 25.991260] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 25.992038] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 26.031370] cryptd: max_cpu_qlen set to 1000
[ 26.668684] SSE version of gcm_enc/dec engaged.
[ 26.684755] Intel(R) Wireless WiFi driver for Linux
[ 26.684758] Copyright(c) 2003- 2015 Intel Corporation
[ 26.753721] checking generic (a0000 10000) vs hw (80000000 8000000)
[ 26.753725] fb0: switching to inteldrmfb from EFI VGA
[ 26.753919] Console: switching to colour dummy device 80x25
[ 26.754028] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 26.754163] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 26.754164] [drm] Driver supports precise vblank timestamp query.
[ 26.756781] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 26.770900] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 26.774618] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 26.775115] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 26.831114] Bluetooth: Core ver 2.22
[ 26.831160] NET: Registered protocol family 31
[ 26.831162] Bluetooth: HCI device and connection manager initialized
[ 26.831169] Bluetooth: HCI socket layer initialized
[ 26.831172] Bluetooth: L2CAP socket layer initialized
[ 26.831180] Bluetooth: SCO socket layer initialized
[ 26.886044] fbcon: i915drmfb (fb0) is primary device
[ 26.886233] Console: switching to colour frame buffer device 240x67
[ 26.886293] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 27.893937] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM
[ 27.893942] iwlwifi 0000:02:00.0: Found debug configuration: 0
[ 27.894887] iwlwifi 0000:02:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
[ 28.170580] usblp 1-4.1:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0881
[ 28.170664] usbcore: registered new interface driver usblp
[ 28.583763] usbcore: registered new interface driver btusb
[ 28.599234] Bluetooth: hci0: read Intel version: 370810011003110e32
[ 28.599237] Bluetooth: hci0: Intel device is already patched. patch num: 32
[ 29.340848] kauditd_printk_skb: 56 callbacks suppressed
[ 29.340851] audit: type=1400 audit(1620146307.784:68): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/cups-browsed" pid=783 comm="apparmor_parser"
[ 29.341058] audit: type=1400 audit(1620146307.784:69): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lsb_release" pid=784 comm="apparmor_parser"
[ 29.346051] audit: type=1400 audit(1620146307.788:70): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-senddoc" pid=787 comm="apparmor_parser"
[ 29.358829] audit: type=1400 audit(1620146307.804:71): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/tcpdump" pid=791 comm="apparmor_parser"
[ 29.367514] audit: type=1400 audit(1620146307.812:72): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=788 comm="apparmor_parser"
[ 29.367523] audit: type=1400 audit(1620146307.812:73): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=788 comm="apparmor_parser"
[ 29.367528] audit: type=1400 audit(1620146307.812:74): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=788 comm="apparmor_parser"
[ 29.367533] audit: type=1400 audit(1620146307.812:75): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=788 comm="apparmor_parser"
[ 29.367538] audit: type=1400 audit(1620146307.812:76): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=788 comm="apparmor_parser"
[ 29.371698] audit: type=1400 audit(1620146307.816:77): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="nvidia_modprobe" pid=793 comm="apparmor_parser"
[ 29.374699] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 29.389779] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM
[ 29.393401] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 29.401918] iwlwifi 0000:02:00.0: base HW address: 34:02:86:d2:ac:f3
[ 29.450057] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 29.466640] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 29.467477] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 30.458513] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=2 (0x1b/0x21/0x0/0x0/0x0) type:hp
[ 30.458518] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.458520] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 30.458522] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 30.458524] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 30.458525] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 30.458528] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 30.632925] intel_rapl_common: Found RAPL domain package
[ 30.632930] intel_rapl_common: Found RAPL domain core
[ 30.818326] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 30.818451] input: HDA Intel PCH Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 30.818566] input: HDA Intel PCH Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 30.818679] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 32.202461] Adding 8305660k swap on /dev/sda5. Priority:-2 extents:1 across:8305660k FS
[ 56.541124] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 56.651695] r8169 0000:03:00.0 eth0: Link is Down
[ 60.172758] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 60.172793] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 61.075745] kauditd_printk_skb: 122 callbacks suppressed
[ 61.075748] audit: type=1400 audit(1620146339.520:200): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1158 comm="cups-browsed" capability=23 capname="sys_nice"
[ 62.798433] usblp1: removed
[ 62.808058] usblp 1-4.1:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0881
[ 209.210413] rfkill: input handler disabledHors ligne
#5 Le 04/05/2021, à 19:04
- geole
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
De toute facon,
$ systemd-analyze
Startup finished in 5.046s (kernel) + 1min 27.363s (userspace) = 1min 32.409s
graphical.target reached after 1min 14.473s in userspaceAvec une minute 32 secondes tu es dans les normes en utilisant un disque dur.
[ 62.808058] usblp 1-4.1:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0881
[ 209.210413] rfkill: input handler disabled
reste à trouver ce que cette dernière ligne signifie
===> https://unix.stackexchange.com/question … r-disabled
Tu as probablement quelques autres lignes
dmesg | tail -50Dernière modification par geole (Le 04/05/2021, à 19:09)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#6 Le 04/05/2021, à 19:12
- iznobe
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Bonjour , la desactivation de services ce n' est pas ce que j' aurais fait , par contre le nettoyage oui .
les commandes que tu passes decrive un demarrage en 1min et 32 sec .
donc le probleme ne vient pas de là non plus .
il manque 3 min ailleurs , que donne :
cat /etc/fstabet
blkidpour y voir plus clair dans le dmesg , je propose cette commande :
sudo dmesg | grep err dans le journal on peut noter , pas mal de problemes :
mai 04 14:07:18 ordiBureau kernel: scsi 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
mai 04 14:07:18 ordiBureau kernel: scsi 2:0:0:1: Failed to get diagnostic page 0x1
mai 04 14:07:18 ordiBureau kernel: scsi 2:0:0:1: Failed to bind enclosure -19
mai 04 14:07:18 ordiBureau kernel: ses 3:0:0:1: Wrong diagnostic page; asked for 1 got 8
mai 04 14:07:18 ordiBureau kernel: ses 3:0:0:1: Failed to get diagnostic page 0x1
mai 04 14:07:18 ordiBureau kernel: ses 3:0:0:1: Failed to bind enclosure -19mai 04 14:07:26 ordiBureau systemd[1]: Failed to start Load AppArmor profiles.
mai 04 14:07:32 ordiBureau systemd[1]: Failed to start Load AppArmor profiles.
mai 04 14:07:36 ordiBureau systemd[1]: Failed to start Load AppArmor profiles.mai 04 14:08:32 ordiBureau pulseaudio[1404]: GetManagedObjects() failed: org.freedesktop.systemd1.NoSuchUnit: Unit dbus-org.bluez.service not found.en rapport aveccette derniere ligne , que donne :
find ~ ! -user $USERPS : rfkill gere le bluetooth et le wifi activation etc , et la derniere ligne est aussi en rapport avec le bluetooth et sa communication , ils sont peut etre liés .
Dernière modification par iznobe (Le 04/05/2021, à 19:19)
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
En ligne
#7 Le 04/05/2021, à 19:14
- geole
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Tu n'es pas le seul y compris avec un SSD https://forum.ubuntu-fr.org/viewtopic.p … #p22366755
Mais je ne suis pas certain qu'il participe à la lenteur du démarrage.
Dernière modification par geole (Le 04/05/2021, à 19:22)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#8 Le 05/05/2021, à 07:27
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Voilà les quelques retours demandés:
$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=671a7b4a-b8e8-4c19-8037-fdb97a806338 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=55d73341-6618-4f85-8ef6-bd542bbf26ca none swap sw 0 0$ blkid
/dev/sda5: UUID="55d73341-6618-4f85-8ef6-bd542bbf26ca" TYPE="swap" PARTUUID="000387db-05"
/dev/sda1: UUID="671a7b4a-b8e8-4c19-8037-fdb97a806338" TYPE="ext4" PARTUUID="000387db-01"$ sudo dmesg | grep err
[ 0.098882] ACPI: IRQ0 used by override.
[ 0.098885] ACPI: IRQ9 used by override.
[ 0.236050] spurious 8259A interrupt: IRQ7.
[ 0.315212] ACPI: Using IOAPIC for interrupt routing
[ 0.391709] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.392021] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.392335] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.392647] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.392958] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.393263] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.393573] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.393882] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.928582] fbcon: Deferring console take-over
[ 1.445425] sdhci: Copyright(c) Pierre Ossman
[ 1.464487] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 11.905925] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro$ find ~ ! -user $USER
/home/csbobillier/.install4j
/home/csbobillier/.anydesk/incoming
find: ‘/home/csbobillier/.anydesk/incoming’: Permission non accordée
/home/csbobillier/.anydesk/AnyDesk
find: ‘/home/csbobillier/.anydesk/AnyDesk’: Permission non accordée
/home/csbobillier/jd2/.install4j/i4jparams.conf
/home/csbobillier/jd2/.install4j/inst_jre.cfg
/home/csbobillier/jd2/.install4j/i4j_extf_6_69g5ss_1jb375m.png
/home/csbobillier/jd2/.install4j/i4j_extf_9_69g5ss_18t4isd.icns
/home/csbobillier/jd2/.install4j/i4j_extf_10_69g5ss_1kdboqw.ico
/home/csbobillier/jd2/.install4j/autoUninstall.2
/home/csbobillier/jd2/.install4j/Uninstall JDownloader.png
/home/csbobillier/jd2/.install4j/i4j_extf_5_69g5ss_14qfchv.png
/home/csbobillier/jd2/.install4j/user/logs/1467682112487_Tue, Jul 5, 2016 03.28 +0200
/home/csbobillier/jd2/.install4j/user/logs/1467682112487_Tue, Jul 5, 2016 03.28 +0200/Log.L.log.0.lck
/home/csbobillier/jd2/.install4j/user/logs/1467682112487_Tue, Jul 5, 2016 03.28 +0200/Log.L.log.0
/home/csbobillier/jd2/.install4j/user/cfg/ProxySelector.proxies.json
/home/csbobillier/jd2/.install4j/user/add.png
/home/csbobillier/jd2/.install4j/user/proxyVole.jar
/home/csbobillier/jd2/.install4j/user/paysafecard_large.png
/home/csbobillier/jd2/.install4j/user/bitcoin_large.png
/home/csbobillier/jd2/.install4j/user/paypal_large.png
/home/csbobillier/jd2/.install4j/user/tmp/pasc
/home/csbobillier/jd2/.install4j/user/tafel_herz.png
/home/csbobillier/jd2/.install4j/i4j_extf_8_69g5ss_jbdzbb.png
/home/csbobillier/jd2/.install4j/i4j_extf_3_69g5ss.utf8
/home/csbobillier/jd2/.install4j/b0fa7dea.lprop
/home/csbobillier/jd2/.install4j/s_14cflck.png
/home/csbobillier/jd2/.install4j/i4j_extf_7_69g5ss_1pcd4ys.png
/home/csbobillier/jd2/.install4j/JDownloader2.png
/home/csbobillier/jd2/.install4j/i4j_extf_2_69g5ss.utf8
/home/csbobillier/jd2/.install4j/MessagesDefault
/home/csbobillier/jd2/.install4j/i4j_extf_0_69g5ss.utf8
/home/csbobillier/jd2/.install4j/i4j_extf_4_69g5ss_yklgyb.png
/home/csbobillier/jd2/.install4j/pref_jre.cfg
/home/csbobillier/jd2/.install4j/883f5673.lprop
/home/csbobillier/jd2/.install4j/i4jruntime.jar
/home/csbobillier/jd2/.install4j/e202d785.lprop
/home/csbobillier/jd2/.install4j/i4j_extf_1_69g5ss.utf8
/home/csbobillier/jd2/.install4j/JDownloader2Update.png
/home/csbobillier/jd2/.install4j/stats.properties
/home/csbobillier/.cache/doc
find: ‘/home/csbobillier/.cache/doc’: Permission non accordée
/home/csbobillier/.gnome2/SBackup
/home/csbobillier/.gdfuse/default/.config.swp
/home/csbobillier/.local/share/gvfs-metadata/uuid-4A0180F940B78171-c6b59694.log
/home/csbobillier/.local/share/gvfs-metadata/uuid-4A0180F940B78171
/home/csbobillier/.local/share/gvfs-metadata/root
/home/csbobillier/.local/share/gvfs-metadata/root-6a6902bf.logDernière modification par DonLope (Le 05/05/2021, à 08:03)
Hors ligne
#9 Le 05/05/2021, à 09:22
- bonuscad
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
geole a écrit :
Bonjour
Merci pour la totalité. Tout semble bon, La grosse anomalie est la[ 61.312785] usblp 1-4.1:1.1: usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0881 [ 204.674539] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 204.708964] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)et
ID-2: /dev/sdb type: USB vendor: Western Digital model: WD My Passport 25E2 size: 3.64 TiB ID-3: /dev/sdc type: USB vendor: Western Digital model: WD My Passport 2627 size: 4.55 TiBSi tu pouvais débrancher ces deux énormes disques pour voir s'ils sont en cause.
Bonjour
Presque d'accord avec geole, mais à contrario je pense que c'est plutôt l'imprimante branchée en usb qui pause problème:
ça démarre à 61.312785 et ça fini à 204.674539.
Pour moi l'établissement de la communication n'est pas au top.
Essaye de redémarrer avec cette imprimante en usb débranchée, voir si ce n'est pas le problème.
Hors ligne
#10 Le 05/05/2021, à 09:30
- iznobe
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Bonjour , de mon coté pas grand chose a signaler , si ce n' est quelques fichiers n' ayant pas les bons droits dans le /home .
pour remettre les bons droits sur ces fichiers :
sudo chown -v $user: /home/$useren particulier ceux-là qui pourrait avoir une incidence :
/home/csbobillier/.gdfuse/default/.config.swp
/home/csbobillier/.local/share/gvfs-metadata/uuid-4A0180F940B78171-c6b59694.log
/home/csbobillier/.local/share/gvfs-metadata/uuid-4A0180F940B78171
/home/csbobillier/.local/share/gvfs-metadata/root
/home/csbobillier/.local/share/gvfs-metadata/root-6a6902bf.logDernière modification par iznobe (Le 05/05/2021, à 09:33)
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
En ligne
#11 Le 05/05/2021, à 14:22
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Pour répondre à bonuscad: avec les deux disques durs et sans l'imprimante, le système démarre en 3 min 45 sec. Un petit mieux donc, mais ça laisse un paquet de secondes inexpliquées
$ systemd-analyze
Startup finished in 5.046s (kernel) + 1min 16.685s (userspace) = 1min 21.732s
graphical.target reached after 1min 9.425s in userspaceEt voilà la fin de dmesg (à partir de 30sec):
[ 31.278133] Adding 8305660k swap on /dev/sda5. Priority:-2 extents:1 across:8305660k FS
[ 50.776207] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 50.887641] r8169 0000:03:00.0 eth0: Link is Down
[ 54.421557] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 54.421597] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 54.931067] kauditd_printk_skb: 56 callbacks suppressed
[ 54.931071] audit: type=1400 audit(1620216727.376:134): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1078 comm="cups-browsed" capability=23 capname="sys_nice"
[ 177.799871] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 177.841129] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 179.333126] rfkill: input handler disabledJe reviens dans 5-10 minutes après les actions suggérées par iznobe...
Hors ligne
#12 Le 05/05/2021, à 14:29
- xubu1957
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Bonjour,
Montre aussi :
dpkg -l | grep -v ^iiConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#13 Le 05/05/2021, à 14:51
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Avec les disques externes, sans l'imprimante, et avec les corrections de iznobe, je démarre toujours en 3'45.
Je n'ai plus d'erreurs de droits:
$ find ~ ! -user $USER
/home/csbobillier/.install4j
/home/csbobillier/jd2/.install4j/i4jparams.conf
/home/csbobillier/jd2/.install4j/inst_jre.cfg
/home/csbobillier/jd2/.install4j/i4j_extf_6_69g5ss_1jb375m.png
/home/csbobillier/jd2/.install4j/i4j_extf_9_69g5ss_18t4isd.icns
/home/csbobillier/jd2/.install4j/i4j_extf_10_69g5ss_1kdboqw.ico
/home/csbobillier/jd2/.install4j/autoUninstall.2
/home/csbobillier/jd2/.install4j/Uninstall JDownloader.png
/home/csbobillier/jd2/.install4j/i4j_extf_5_69g5ss_14qfchv.png
/home/csbobillier/jd2/.install4j/user/logs/1467682112487_Tue, Jul 5, 2016 03.28 +0200
/home/csbobillier/jd2/.install4j/user/logs/1467682112487_Tue, Jul 5, 2016 03.28 +0200/Log.L.log.0.lck
/home/csbobillier/jd2/.install4j/user/logs/1467682112487_Tue, Jul 5, 2016 03.28 +0200/Log.L.log.0
/home/csbobillier/jd2/.install4j/user/cfg/ProxySelector.proxies.json
/home/csbobillier/jd2/.install4j/user/add.png
/home/csbobillier/jd2/.install4j/user/proxyVole.jar
/home/csbobillier/jd2/.install4j/user/paysafecard_large.png
/home/csbobillier/jd2/.install4j/user/bitcoin_large.png
/home/csbobillier/jd2/.install4j/user/paypal_large.png
/home/csbobillier/jd2/.install4j/user/tmp/pasc
/home/csbobillier/jd2/.install4j/user/tafel_herz.png
/home/csbobillier/jd2/.install4j/i4j_extf_8_69g5ss_jbdzbb.png
/home/csbobillier/jd2/.install4j/i4j_extf_3_69g5ss.utf8
/home/csbobillier/jd2/.install4j/b0fa7dea.lprop
/home/csbobillier/jd2/.install4j/s_14cflck.png
/home/csbobillier/jd2/.install4j/i4j_extf_7_69g5ss_1pcd4ys.png
/home/csbobillier/jd2/.install4j/JDownloader2.png
/home/csbobillier/jd2/.install4j/i4j_extf_2_69g5ss.utf8
/home/csbobillier/jd2/.install4j/MessagesDefault
/home/csbobillier/jd2/.install4j/i4j_extf_0_69g5ss.utf8
/home/csbobillier/jd2/.install4j/i4j_extf_4_69g5ss_yklgyb.png
/home/csbobillier/jd2/.install4j/pref_jre.cfg
/home/csbobillier/jd2/.install4j/883f5673.lprop
/home/csbobillier/jd2/.install4j/i4jruntime.jar
/home/csbobillier/jd2/.install4j/e202d785.lprop
/home/csbobillier/jd2/.install4j/i4j_extf_1_69g5ss.utf8
/home/csbobillier/jd2/.install4j/JDownloader2Update.png
/home/csbobillier/jd2/.install4j/stats.properties
/home/csbobillier/.gnome2/SBackupmais j'ai toujours
$dmesg
...
[ 31.927132] Adding 8305660k swap on /dev/sda5. Priority:-2 extents:1 across:8305660k FS
[ 50.030176] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 50.140526] r8169 0000:03:00.0 eth0: Link is Down
[ 53.661554] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 53.661616] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 58.468750] kauditd_printk_skb: 56 callbacks suppressed
[ 58.468756] audit: type=1400 audit(1620218736.916:134): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1075 comm="cups-browsed" capability=23 capname="sys_nice"
[ 178.657972] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 178.739150] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 180.373257] rfkill: input handler disabledHors ligne
#14 Le 05/05/2021, à 14:53
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Pour xubu1957:
$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-===========================================================-===========================================-============-==================================================================================================================================================================================
rc brltty 6.0+dfsg-4ubuntu6 amd64 Access software for a blind person using a braille display
rc language-pack-de-base 1:20.04+20210121 all translations for language German
rc language-pack-en-base 1:20.04+20210121 all translations for language English
rc language-pack-gnome-de-base 1:20.04+20210121 all GNOME translations for language German
rc language-pack-gnome-en-base 1:20.04+20210121 all GNOME translations for language English
rc libreoffice-help-de 1:6.4.7-0ubuntu0.20.04.1 all office productivity suite -- German help
rc libreoffice-l10n-de 1:6.4.7-0ubuntu0.20.04.1 all office productivity suite -- German language package
rc mlocate 0.26-3ubuntu3 amd64 quickly find files on the filesystem based on their name
rc network-manager-pptp 1.2.8-2 amd64 network management framework (PPTP plugin core)
rc orca 3.36.2-1ubuntu1~20.04.1 all Scriptable screen reader
rc ppp 2.4.7-2+4.1ubuntu5.1 amd64 Point-to-Point Protocol (PPP) - daemon
rc pppconfig 2.3.24 all Text menu based utility for configuring ppp
rc pppoeconf 1.21ubuntu1 all configures PPPoE/ADSL connections
rc pptp-linux 1.10.0-1build1 amd64 Point-to-Point Tunneling Protocol (PPTP) Client
rc snapd 2.48.3+20.04 amd64 Daemon and tooling that enable snap packages
rc speech-dispatcher 0.9.1-4 amd64 Common interface to speech synthesizers
rc xbrlapi 6.0+dfsg-4ubuntu6 amd64 Access software for a blind person using a braille display - xbrlapiHors ligne
#15 Le 05/05/2021, à 15:03
- xubu1957
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Pour nettoyer :
Le 11/02/2017, moko138 a écrit :
Pour supprimer tous ces fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
Regarde aussi certaines commandes données par f.x0 dans > [Résolu]Temps de démarrage 18.04
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#16 Le 05/05/2021, à 15:17
- iznobe
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Re bonjour , que donne :
sudo dmesg | grep fsckretour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
En ligne
#17 Le 05/05/2021, à 15:33
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Je ne le dis pas à chaque message, mais vraiment merci pour le temps que vous passez, chacun, pour m'aider !!
Pour xubu1957:
J'avais fait ce nettoyage "dpkg..." mais par contre je n'avais pas pensé à le refaire après avoir désinstallé certains paquets. Voilà qui est fait, et c'est impressionnant le nombre de lignes associées à snap:
$ dpkg -l | awk '/^rc/{print $2}' | xargs -r sudo dpkg -P
(Lecture de la base de données... 260617 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de brltty (6.0+dfsg-4ubuntu6) ...
Purge des fichiers de configuration de language-pack-de-base (1:20.04+20210121) ...
Purge des fichiers de configuration de language-pack-en-base (1:20.04+20210121) ...
Purge des fichiers de configuration de language-pack-gnome-de-base (1:20.04+20210121) ...
Purge des fichiers de configuration de language-pack-gnome-en-base (1:20.04+20210121) ...
Purge des fichiers de configuration de libreoffice-help-de (1:6.4.7-0ubuntu0.20.04.1) ...
Purge des fichiers de configuration de libreoffice-l10n-de (1:6.4.7-0ubuntu0.20.04.1) ...
Purge des fichiers de configuration de mlocate (0.26-3ubuntu3) ...
Purge des fichiers de configuration de network-manager-pptp (1.2.8-2) ...
Purge des fichiers de configuration de orca (3.36.2-1ubuntu1~20.04.1) ...
Purge des fichiers de configuration de ppp (2.4.7-2+4.1ubuntu5.1) ...
Purge des fichiers de configuration de pppconfig (2.3.24) ...
Purge des fichiers de configuration de pppoeconf (1.21ubuntu1) ...
Purge des fichiers de configuration de pptp-linux (1.10.0-1build1) ...
Purge des fichiers de configuration de snapd (2.48.3+20.04) ...
Stopping snap-core-10958.mount
Stopping unit snap-core-10958.mount
Waiting until unit snap-core-10958.mount is stopped [attempt 1]
snap-core-10958.mount is stopped.
Removing snap core and revision 10958
Removing snap-core-10958.mount
Stopping snap-core18-1997.mount
Stopping unit snap-core18-1997.mount
Waiting until unit snap-core18-1997.mount is stopped [attempt 1]
snap-core18-1997.mount is stopped.
Removing snap core18 and revision 1997
Removing snap-core18-1997.mount
Stopping snap-gnome\x2d3\x2d26\x2d1604-102.mount
Stopping unit snap-gnome\x2d3\x2d26\x2d1604-102.mount
Waiting until unit snap-gnome\x2d3\x2d26\x2d1604-102.mount is stopped [attempt 1]
snap-gnome\x2d3\x2d26\x2d1604-102.mount is stopped.
Removing snap gnome-3-26-1604 and revision 102
Removing snap-gnome\x2d3\x2d26\x2d1604-102.mount
Stopping snap-gnome\x2d3\x2d28\x2d1804-145.mount
Stopping unit snap-gnome\x2d3\x2d28\x2d1804-145.mount
Waiting until unit snap-gnome\x2d3\x2d28\x2d1804-145.mount is stopped [attempt 1]
snap-gnome\x2d3\x2d28\x2d1804-145.mount is stopped.
Removing snap gnome-3-28-1804 and revision 145
Removing snap-gnome\x2d3\x2d28\x2d1804-145.mount
Stopping snap-gnome\x2d3\x2d34\x2d1804-66.mount
Stopping unit snap-gnome\x2d3\x2d34\x2d1804-66.mount
Waiting until unit snap-gnome\x2d3\x2d34\x2d1804-66.mount is stopped [attempt 1]
snap-gnome\x2d3\x2d34\x2d1804-66.mount is stopped.
Removing snap gnome-3-34-1804 and revision 66
Removing snap-gnome\x2d3\x2d34\x2d1804-66.mount
Stopping snap-gnome\x2dsystem\x2dmonitor-157.mount
Stopping unit snap-gnome\x2dsystem\x2dmonitor-157.mount
Waiting until unit snap-gnome\x2dsystem\x2dmonitor-157.mount is stopped [attempt 1]
snap-gnome\x2dsystem\x2dmonitor-157.mount is stopped.
Removing snap gnome-system-monitor and revision 157
Removing snap-gnome\x2dsystem\x2dmonitor-157.mount
Stopping snap-gtk\x2dcommon\x2dthemes-1515.mount
Stopping unit snap-gtk\x2dcommon\x2dthemes-1515.mount
Waiting until unit snap-gtk\x2dcommon\x2dthemes-1515.mount is stopped [attempt 1]
snap-gtk\x2dcommon\x2dthemes-1515.mount is stopped.
Removing snap gtk-common-themes and revision 1515
Removing snap-gtk\x2dcommon\x2dthemes-1515.mount
Stopping snap-snap\x2dstore-518.mount
Stopping unit snap-snap\x2dstore-518.mount
Waiting until unit snap-snap\x2dstore-518.mount is stopped [attempt 1]
snap-snap\x2dstore-518.mount is stopped.
Removing snap snap-store and revision 518
Removing snap-snap\x2dstore-518.mount
Stopping snap-sweethome3d\x2dhomedesign-13.mount
Stopping unit snap-sweethome3d\x2dhomedesign-13.mount
Waiting until unit snap-sweethome3d\x2dhomedesign-13.mount is stopped [attempt 1]
snap-sweethome3d\x2dhomedesign-13.mount is stopped.
Removing snap sweethome3d-homedesign and revision 13
Removing snap-sweethome3d\x2dhomedesign-13.mount
Final directory cleanup
Discarding preserved snap namespaces
Removing extra snap-confine apparmor rules
Removing snapd cache
Removing snapd state
Purge des fichiers de configuration de speech-dispatcher (0.9.1-4) ...
Purge des fichiers de configuration de xbrlapi (6.0+dfsg-4ubuntu6) ...
Traitement des actions différées (« triggers ») pour systemd (245.4-4ubuntu3.6) ...Pour les suggestiond f.x0, j'avais déjà fait cela.
Pour iznobe:
$ sudo dmesg | grep fsck
[ 21.349922] systemd[1]: Listening on fsck to fsckd communication Socket.Allez, je redémarre pour voir si le nettoyage dpkg a été efficace...
Hors ligne
#18 Le 05/05/2021, à 15:44
- iznobe
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
si tu veux gagner du temps sur ton demarrage et des ressources de façon generale , desinstalle tous les paquets snap que tu peux installer en .deb a la place .
si a la fin des courses , il n ' y a plus que 3 ou 4 paquets envisage de supprimer completement snap .
Sans parler que les snaps peuvent causer des problemes qui n ' apparraissent nulle part puisque le principe est qu ils sont confinés , dont lenteur au demarrage , fuite de memoire , usage de ressources inconsiderées sur les ordis ayant peu de ressources .
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
En ligne
#19 Le 05/05/2021, à 15:45
- xubu1957
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Fais voir :
snap list --allConseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#20 Le 05/05/2021, à 15:47
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Bon, pas concluant, malheureusement: 4 min 05 sec à mon chrono, entre l'appui sur le bouton 'marche' et l'affichage du bureau.
Pourtant le démarrage kernel et userspace ont tendance à être un peu plus rapide...
$ systemd-analyze
Startup finished in 4.968s (kernel) + 1min 8.344s (userspace) = 1min 13.313s
graphical.target reached after 55.876s in userspacela fin de dmesg indique:
$dmesg
...
[ 26.954987] Adding 8305660k swap on /dev/sda5. Priority:-2 extents:1 across:8305660k FS
[ 46.042643] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 46.152506] r8169 0000:03:00.0 eth0: Link is Down
[ 49.658792] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 49.658858] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 53.777684] kauditd_printk_skb: 23 callbacks suppressed
[ 53.777688] audit: type=1400 audit(1620221751.240:35): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=765 comm="cups-browsed" capability=23 capname="sys_nice"
[ 197.923344] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 198.073119] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 198.140625] rfkill: input handler disabledEt je redonne aussi
$ systemd-analyze blame
32.482s apport-autoreport.service
22.342s networkd-dispatcher.service
19.668s udisks2.service
16.977s accounts-daemon.service
16.224s systemd-journal-flush.service
15.029s nmbd.service
14.804s dev-sda1.device
11.112s avahi-daemon.service
10.966s NetworkManager.service
10.658s bandwidthd.service
10.541s switcheroo-control.service
10.526s thermald.service
10.442s systemd-logind.service
10.438s wpa_supplicant.service
8.202s smartmontools.service
6.832s systemd-resolved.service
5.928s systemd-udevd.service
5.873s gpu-manager.service
5.020s smbd.service
4.415s gdm.service
3.931s apparmor.service
3.720s colord.service
3.644s rsyslog.service
3.375s grub-common.service
3.042s user@1000.service
2.770s apport.service
2.284s e2scrub_reap.service
2.255s lm-sensors.service
2.037s packagekit.service
1.948s networking.service
1.555s plymouth-read-write.service
1.496s grub-initrd-fallback.service
1.320s systemd-sysusers.service
1.224s systemd-modules-load.service
993ms keyboard-setup.service
993ms systemd-journald.service
989ms upower.service
958ms polkit.service
853ms systemd-tmpfiles-setup-dev.service
851ms systemd-sysctl.service
846ms binfmt-support.service
813ms kerneloops.service
701ms atd.service
688ms modprobe@drm.service
637ms systemd-udev-trigger.service
601ms dev-hugepages.mount
598ms dev-mqueue.mount
596ms sys-kernel-debug.mount
593ms sys-kernel-tracing.mount
583ms kmod-static-nodes.service
559ms systemd-random-seed.service
422ms ufw.service
419ms systemd-rfkill.service
407ms systemd-tmpfiles-setup.service
360ms ifupdown-pre.service
331ms plymouth-start.service
316ms dev-disk-by\x2duuid-55d73341\x2d6618\x2d4f85\x2d8ef6\x2dbd542bbf26ca.swap
311ms systemd-timesyncd.service
286ms systemd-remount-fs.service
274ms setvtrgb.service
270ms sabnzbdplus.service
205ms alsa-restore.service
179ms console-setup.service
168ms hddtemp.service
132ms proc-sys-fs-binfmt_misc.mount
97ms openvpn.service
87ms systemd-user-sessions.service
79ms systemd-update-utmp.service
79ms rtkit-daemon.service
71ms user-runtime-dir@1000.service
39ms resolvconf-pull-resolved.service
31ms systemd-update-utmp-runlevel.service
13ms sys-fs-fuse-connections.mount
11ms sys-kernel-config.mount
960us clean-mount-point@media-csbobillier-DONNEES.service
881us clean-mount-point@media-csbobillier-SAUVEGARDE.service et
$ systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @55.876s
└─multi-user.target @55.874s
└─smbd.service @50.850s +5.020s
└─nmbd.service @35.808s +15.029s
└─network-online.target @35.721s
└─network.target @35.721s
└─NetworkManager.service @24.750s +10.966s
└─dbus.service @24.732s
└─basic.target @24.372s
└─sockets.target @24.372s
└─uuidd.socket @24.372s
└─sysinit.target @24.103s
└─systemd-timesyncd.service @23.791s +311ms
└─systemd-tmpfiles-setup.service @23.361s +407ms
└─systemd-journal-flush.service @7.134s +16.224s
└─systemd-journald.service @6.131s +993ms
└─systemd-journald.socket @6.114s
└─-.mount @6.083s
└─system.slice @6.083s
└─-.slice @6.083sJe m'absente un moment Si vous avez d'autres pistes, je les appliquerai à mon retour... Merci par avance!
Hors ligne
#21 Le 05/05/2021, à 15:52
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Ben normalement je n'ai plus de snap, puisque j'ai supprimé les paquets suivants: snapd snapd-login-service snap-confine (voir mon premier message, cela faisait partie des conseils de https://doc.ubuntu-fr.org/optimisation)
Du coup, j'ai ça:
$ snap list --all
La commande « snap » n'a pas été trouvée, mais peut être installée avec :
sudo apt install snapdEst-ce qu'en fait j'ai désinstallé les paquets permettant de faire de nouvelles installations en snap, mais que ça n'a pas désinstallé pour autant ce qui était déjà en snap ?
Hors ligne
#22 Le 05/05/2021, à 15:54
- DonLope
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
J'ai fait "sudo apt install snapd" pour ensuite pouvoir vérifier les snap installés:
$ snap list --all
Aucun snap installé pour le moment. Essayez « snap install hello-world »Hors ligne
#23 Le 05/05/2021, à 16:20
- geole
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Bonjour,
On peut tenter de mettre un niveau supérieur de traces au démarrage pour faire parler plus la trace dmesg.
1) Editer le fichier /etc/default/grub pour ajouter debug loglevel=7 dans la ligne
GRUB_CMDLINE_LINUX_DEFAULT=" quiet splash"pour qu'elle devienne
GRUB_CMDLINE_LINUX_DEFAULT="debug loglevel=7 quiet splash"2) Puis mettre à jour GRUB avec la commande
sudo update-grubLes grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#24 Le 05/05/2021, à 19:53
- bonuscad
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
[ 53.777688] audit: type=1400 audit(1620221751.240:35): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=765 comm="cups-browsed" capability=23 capname="sys_nice"
[ 197.923344] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)Ici on dirait que c'est Cups qui rame, c'est encore lié à l'impression, L'imprimante est rebranchée?
Hors ligne
#25 Le 05/05/2021, à 21:25
- inbox
Re : [Résolu] Démarrage lent en 20.04: plus de 4 minutes !
Salut,
Je pense plutôt que ce sont sdc1 et sdb1 qui ralentissent le démarrage. Dans le dernier message de Bonuscad, les 144 secondes avant le message de montage de Sdb1 sont 144 secondes de plus nécessaires au démarrage du système.
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne