#1 Le 13/09/2021, à 10:50
- madeinmars
Démarrage impossible (écran noir)
Bonjour à tous,
depuis quelques temps, le démarrage sur Ubuntu 20.04 ne marche plus. Après l'écran du Grub, je reste sur un écran noir.
J'arrive toutefois à démarrer si je choisis les options avancés et une autre option (de mémoire 5.8.0-53-Generic)
J'ai lancé une session live et un boot-repair mais rien n'a changé.
Pour info, voici le 'diagnostic' de bootInfo:
Bootinfo
boot-info-4ppa130 [20210913_1046]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/nvme0n1.
=> No boot loader is installed in the MBR of /dev/sda.
nvme0n1p1: _____________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/Boot/grubx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/shimx64.efi
/efi/HP/BIOSUpdate/BiosMgmt.efi
/efi/HP/BIOSUpdate/CryptRSA.efi
/efi/HP/SystemDiags/CryptRSA.efi
/efi/HP/SystemDiags/SysDiags.efi
/efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/memtest.efi
nvme0n1p2: _____________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
nvme0n1p3: _____________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8 or 10
Boot files: /Windows/System32/winload.exe
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bkpbootx64.efi /efi/Boot/bootx64.efi
/efi/Boot/fbx64.efi /efi/Boot/grubx64.efi
/efi/Boot/mmx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
/efi/Microsoft/Boot/memtest.efi
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 10
Boot files: /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
================================ 3 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 20.04.3 LTS CurrentSession on sda6
OS#2: Windows 8 or 10 on nvme0n1p3
OS#3: Windows 10 on sda4
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.8.0-53-generic root=UUID=c3854395-b49b-4768-aed0-ba77345c81eb ro quiet splash vt.handoff=7
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 000A,0000,000C,0004,0001,0006,0002,0003
Boot0000* Windows Boot Manager HD(2,GPT,3e217bdd-fc39-4ec7-8825-3ea90a896b91,0xfa000,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a....................ISPH
Boot0001* Samsung SSD 860 EVO 500GB BBS(HD,Samsung SSD 860 EVO 500GB ,0x400)/PciRoot(0x0)/Pci(0x17,0x0)/Sata(0,65535,0)......ISPH
Boot0002* Intel Corporation: Realtek PXE B01 D00 BBS(Network,Intel Corporation: Realtek PXE B01 D00,0x0)/PciRoot(0x0)/Pci(0x1d,0x0)/Pci(0x0,0x0)/IPv4(0.0.0.00.0.0.0,0,0)......ISPH
Boot0003* WDC PC SN520 SDAPNUW-256G-1006-192262805004 BBS(HD,WDC PC SN520 SDAPNUW-256G-1006-192262805004,0x400)/PciRoot(0x0)/Pci(0x1d,0x4)/Pci(0x0,0x0)/NVMe(0x1,00-1B-44-8B-44-C7-68-18)......ISPH
Boot0004* WDC PC SN520 SDAPNUW-256G-1006-192262805004 PciRoot(0x0)/Pci(0x1d,0x4)/Pci(0x0,0x0)/NVMe(0x1,00-1B-44-8B-44-C7-68-18)N.....YM....R,Y.....ISPH
Boot0006* Mass Storage AF48E70A BBS(HD,Mass Storage AF48E70A,0x900)/PciRoot(0x0)/Pci(0x14,0x0)/USB(255,255)......ISPH
Boot0008* IPV4 Network - Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1d,0x0)/Pci(0x0,0x0)/MAC(80e82c247b60,0)/IPv4(0.0.0.00.0.0.0,0,0)N.....YM....R,Y.....ISPH
Boot0009* IPV6 Network - Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1d,0x0)/Pci(0x0,0x0)/MAC(80e82c247b60,0)/IPv6([::]:<->[::]:,0,0)N.....YM....R,Y.....ISPH
Boot000A* ubuntu HD(2,GPT,3e217bdd-fc39-4ec7-8825-3ea90a896b91,0xfa000,0x32000)/File(\EFI\ubuntu\shimx64.efi)
Boot000B* IPV6 Network - Realtek PCIe GBE Family Controller PciRoot(0x0)/Pci(0x1d,0x0)/Pci(0x0,0x0)/MAC(80e82c247b60,0)/IPv6([::]:<->[::]:,0,0)N.....YM....R,Y.....ISPH
Boot000C* Mass Storage AF48E70A PciRoot(0x0)/Pci(0x14,0x0)/USB(0,0)N.....YM....R,Y.....ISPH
58f24185ca254354dc7de9d1998c67dd nvme0n1p1/Boot/bkpbootx64.efi
728124f6ec8e22fbdbe7034812c81b95 nvme0n1p1/Boot/bootx64.efi
637fa7fabc8a2f70312edf2f15e275ff nvme0n1p1/Boot/grubx64.efi
637fa7fabc8a2f70312edf2f15e275ff nvme0n1p1/ubuntu/grubx64.efi
78415fb8fb9b909f8029858113f1335f nvme0n1p1/ubuntu/shimx64.efi
0f3207de86169d1e3cd2a225751c470b nvme0n1p1/HP/BIOSUpdate/BiosMgmt.efi
6488d391f74263c9da3c3d47dffa6212 nvme0n1p1/HP/BIOSUpdate/CryptRSA.efi
6488d391f74263c9da3c3d47dffa6212 nvme0n1p1/HP/SystemDiags/CryptRSA.efi
3a03b12a096aa2246032ce445d44df8e nvme0n1p1/HP/SystemDiags/SysDiags.efi
58f24185ca254354dc7de9d1998c67dd nvme0n1p1/Microsoft/Boot/bootmgfw.efi
f79a631eca306432055c6a3b4aa1c10b nvme0n1p1/Microsoft/Boot/bootmgr.efi
728124f6ec8e22fbdbe7034812c81b95 sda2/Boot/bkpbootx64.efi
728124f6ec8e22fbdbe7034812c81b95 sda2/Boot/bootx64.efi
85fa9d77b929ec4231aba29476574eb6 sda2/Boot/fbx64.efi
637fa7fabc8a2f70312edf2f15e275ff sda2/Boot/grubx64.efi
469e608783843a701d172242f016c79c sda2/Boot/mmx64.efi
fa1bf1a7f90a852abe0bdbd089b7f1b0 sda2/ubuntu/grubx64.efi
469e608783843a701d172242f016c79c sda2/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95 sda2/ubuntu/shimx64.efi
d38dda077adfd657c88631a5a9edc462 sda2/Microsoft/Boot/bootmgfw.efi
4a45f6fd4be5761b077f5369d368611c sda2/Microsoft/Boot/bootmgr.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
nvme0n1 : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda6 : is-os, 64, apt-get, signed grub-efi , grub2, grub-install, grubenv-ok, update-grub, farbios
nvme0n1p1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
nvme0n1p3 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda4 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda5 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
sda6 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p3 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
sda2 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda4 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot
sda5 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda6 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, customized, sda
nvme0n1p1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
nvme0n1p3 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
sda1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda4 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda5 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 238.49 GiB, 256060514304 bytes, 500118192 sectors
Disk identifier: 35B2A6E4-C814-4BF9-92BF-D00748AA79E1
Start End Sectors Size Type
nvme0n1p1 2048 1023999 1021952 499M EFI System
nvme0n1p2 1024000 1286143 262144 128M Microsoft reserved
nvme0n1p3 1286144 500117503 498831360 237.9G Microsoft basic data
Disk sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: DC1E7968-F186-4A30-AADF-68220CFCD6D4
Start End Sectors Size Type
sda1 2048 1023999 1021952 499M Windows recovery environment
sda2 1024000 1228799 204800 100M EFI System
sda3 1228800 1261567 32768 16M Microsoft reserved
sda4 1261568 289988828 288727261 137.7G Microsoft basic data
sda5 289990656 291450879 1460224 713M Windows recovery environment
sda6 291452928 976771071 685318144 326.8G Linux filesystem
parted -lm (filtered): _________________________________________________________
sda:500GB:scsi:512:512:gpt:ATA Samsung SSD 860:;
1:1049kB:524MB:523MB:ntfs:Basic data partition:hidden, diag;
2:524MB:629MB:105MB:fat32:EFI system partition:boot, esp;
3:629MB:646MB:16.8MB::Microsoft reserved partition:msftres;
4:646MB:148GB:148GB:ntfs:Basic data partition:msftdata;
5:148GB:149GB:748MB:ntfs::hidden, diag;
6:149GB:500GB:351GB:ext4::;
nvme0n1:256GB:nvme:512:512:gpt:WDC PC SN520 SDAPNUW-256G-1006:;
1:1049kB:524MB:523MB:fat32:EFI system partition:boot, esp;
2:524MB:659MB:134MB::Microsoft reserved partition:msftres;
3:659MB:256GB:255GB:ntfs:Basic data partition:msftdata;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ntfs 3E6A4B5F6A4B12D7 29ff88a2-0969-44c5-86e4-6d003fb4ceba Recovery Basic data partition
├─sda2 vfat 9A4B-ADB6 3e217bdd-fc39-4ec7-8825-3ea90a896b91 EFI system partition
├─sda3 431b6ed4-4d9b-4239-bb49-b2487723e2a4 Microsoft reserved partition
├─sda4 ntfs 8E304D52304D4307 35a1a223-dea6-4c08-983b-492e969580bb Basic data partition
├─sda5 ntfs 187AE8647AE83FDC b60e41e2-d28d-4db6-9094-8be69283d358
└─sda6 ext4 c3854395-b49b-4768-aed0-ba77345c81eb eaf55448-13b0-4588-954e-488b3ab0c8a5
nvme0n1
├─nvme0n1p1 vfat 260C-F9FD 086c5581-84e1-41b2-a7d6-5b94b7177fb7 BOOT EFI system partition
├─nvme0n1p2 f2dc5b2c-6d82-40b0-8db6-d439e4f4eda8 Microsoft reserved partition
└─nvme0n1p3 ntfs 48920D70920D63B2 96cfe6f0-092e-44d5-8e06-cebf72d2bd0b Windows Basic data partition
df (filtered): _________________________________________________________________
Avail Use% Mounted on
nvme0n1p1 443.9M 10% /mnt/boot-sav/nvme0n1p1
nvme0n1p3 164G 31% /mnt/boot-sav/nvme0n1p3
sda1 488.8M 2% /mnt/boot-sav/sda1
sda2 63M 34% /mnt/boot-sav/sda2
sda4 13G 91% /mnt/boot-sav/sda4
sda5 88.2M 88% /mnt/boot-sav/sda5
sda6 109.7G 61% /
Mount options: __________________________________________________________________
nvme0n1p1 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
nvme0n1p3 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda1 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda2 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sda4 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda5 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda6 rw,relatime,errors=remount-ro
===================== sda2/efi/ubuntu/grub.cfg (filtered) ======================
search.fs_uuid c3854395-b49b-4768-aed0-ba77345c81eb root hd0,gpt6
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
====================== sda6/boot/grub/grub.cfg (filtered) ======================
Windows Boot Manager (sur sda2) osprober-efi-9A4B-ADB6
### END /etc/grub.d/30_os-prober_proxy ###
Ubuntu c3854395-b49b-4768-aed0-ba77345c81eb
Ubuntu, avec Linux 5.11.0-34-generic c3854395-b49b-4768-aed0-ba77345c81eb
Ubuntu, avec Linux 5.8.0-59-generic c3854395-b49b-4768-aed0-ba77345c81eb
Ubuntu, avec Linux 5.8.0-53-generic c3854395-b49b-4768-aed0-ba77345c81eb
Windows Boot Manager (sur nvme0n1p1) osprober-efi-260C-F9FD
UEFI Firmware Settings uefi-firmware
========================== sda6/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=c3854395-b49b-4768-aed0-ba77345c81eb / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
/swapfile none swap sw 0 0
UUID=9A4B-ADB6 /boot/efi vfat defaults 0 1
======================= sda6/etc/default/grub (filtered) =======================
GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE="hidden"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda6: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
159,454357147 = 171,212812288 boot/grub/grub.cfg 1
377,531894684 = 405,371785216 boot/vmlinuz 1
377,531894684 = 405,371785216 boot/vmlinuz-5.11.0-34-generic 1
415,297203064 = 445,921976320 boot/vmlinuz-5.8.0-53-generic 1
161,492523193 = 173,401276416 boot/vmlinuz-5.8.0-59-generic 2
161,492523193 = 173,401276416 boot/vmlinuz.old 2
144,032794952 = 154,654035968 boot/initrd.img 5
144,032794952 = 154,654035968 boot/initrd.img-5.11.0-34-generic 5
142,854061127 = 153,388380160 boot/initrd.img-5.8.0-53-generic 5
143,031806946 = 153,579233280 boot/initrd.img-5.8.0-59-generic 5
143,031806946 = 153,579233280 boot/initrd.img.old 5
===================== sda6: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 932 sept. 13 10:38 10_linux_proxy
-rwxr-xr-x 1 root root 277 sept. 13 10:38 30_os-prober_proxy
-rwxr-xr-x 1 root root 932 sept. 13 10:38 31_linux_proxy
-rwxr-xr-x 1 root root 42359 août 12 11:18 32_linux_zfs
-rwxr-xr-x 1 root root 12894 août 12 11:18 33_linux_xen
-rwxr-xr-x 1 root root 277 sept. 13 10:38 34_os-prober_proxy
-rwxr-xr-x 1 root root 1424 août 12 11:18 35_uefi-firmware
-rwxr-xr-x 1 root root 214 août 12 11:18 40_custom
-rwxr-xr-x 1 root root 216 août 12 11:18 41_custom
drwxr-xr-x 4 root root 4096 sept. 13 10:38 backup
drwxr-xr-x 2 root root 4096 sept. 13 10:38 bin
drwxr-xr-x 2 root root 4096 sept. 13 10:38 proxifiedScripts
======================== sda6/etc/grub.d/31_linux_proxy ========================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/linux' | /etc/grub.d/bin/grubcfg_proxy "+'Ubuntu'~2b79744769d91b5f978e0491baf5277c~
-*
-#text
+'SUBMENU' as 'Options avancées pour Ubuntu'{+'Options avancées pour Ubuntu'/*, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.11.0-34-generic'~3d7e07a584301d80104324ea123ee24f~, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.11.0-34-generic (recovery mode)'~d88c65db172ef7f014467b2e0d969311~, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.8.0-59-generic'~fda0c5e9cf49487eb2e28822cdb100f2~, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.8.0-59-generic (recovery mode)'~8211b039ee27649e91db53d253fab060~, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.8.0-53-generic'~08a78d6a4924330961758a8d31853a47~, +'Options avancées pour Ubuntu'/'Ubuntu, avec Linux 5.8.0-53-generic (recovery mode)'~88d287817b25a3535c2f22aca4c9458d~}
"
========================= sda6/etc/grub.d/32_linux_zfs =========================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2019 Canonical Ltd.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "${pkgdatadir}/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
set -u
## Skip early if zfs utils isn't installed (instead of failing on first zpool list)
if ! `which zfs >/dev/null 2>&1`; then
exit 0
fi
imported_pools=""
MNTDIR="$(mktemp -d ${TMPDIR:-/tmp}/zfsmnt.XXXXXX)"
ZFSTMP="$(mktemp -d ${TMPDIR:-/tmp}/zfstmp.XXXXXX)"
machine="$(uname -m)"
case "${machine}" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="${machine}" ;;
esac
RC=0
on_exit() {
# Restore initial zpool import state
for pool in ${imported_pools}; do
zpool export "${pool}"
done
mountpoint -q "${MNTDIR}" && umount "${MNTDIR}" || true
rmdir "${MNTDIR}"
rm -rf "${ZFSTMP}"
exit "${RC}"
}
trap on_exit EXIT INT QUIT ABRT PIPE TERM
# List ONLINE and DEGRADED pools
import_pools() {
# We have to ignore zpool import output, as potentially multiple / will be available,
# and we need to autodetect all zpools this way with their real mountpoints.
local initial_pools="$(zpool list | awk '{if (NR>1) print $1}')"
local all_pools=""
local imported_pools=""
local err=""
set +e
err="$(zpool import -f -a -o cachefile=none -o readonly=on -N 2>&1)"
# Only print stderr if the command returned an error
# (it can echo "No zpool to import" with success, which we don't want)
if [ $? -ne 0 ]; then
echo "Some pools couldn't be imported and will be ignored:\n${err}" >&2
fi
set -e
all_pools="$(zpool list | awk '{if (NR>1) print $1}')"
for pool in ${all_pools}; do
if echo "${initial_pools}" | grep -wq "${pool}"; then
continue
fi
imported_pools="${imported_pools} ${pool}"
done
echo "${imported_pools}"
}
# List all the dataset with a root mountpoint
get_root_datasets() {
local pools="$(zpool list | awk '{if (NR>1) print $1}')"
for p in ${pools}; do
local rel_pool_root=$(zpool get -H altroot ${p} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root="/"
fi
zfs list -H -o name,canmount,mountpoint -t filesystem | grep -E '^'"${p}"'(\s|/[[:print:]]*\s)(on|noauto)\s'"${rel_pool_root}"'$' | awk '{print $1}'
done
}
# find if given datasets can be mounted for directory and return its path (snapshot or real path)
# $1 is our current dataset name
# $2 directory path we look for (cannot contains /)
# $3 is the temporary mount directory to use
# $4 is the optional snapshot name
# return path for directory (which can be a mountpoint)
validate_system_dataset() {
local dataset="$1"
local directory="$2"
local mntdir="$3"
local snapshot_name="$4"
local mount_path="${mntdir}/${directory}"
if ! zfs list "${dataset}" >/dev/null 2>&1; then
return
fi
if ! mount -o noatime,zfsutil -t zfs "${dataset}" "${mount_path}"; then
grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset}@${snapshot_name}'. Ignoring"
return
fi
local candidate_path="${mount_path}"
if [ -n "${snapshot_name}" ]; then
# WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
# Reading the content of a snapshot fails if it is not the first mount
# for a given dataset
first_mntdir=$(awk '{if ($1 == "'${dataset}'") {print $2; exit;}}' /proc/mounts)
if [ "${first_mntdir}" = "/" ]; then
# prevents // on candidate_path
first_mntdir=""
fi
candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}"
fi
if [ -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
echo "${candidate_path}"
return
else
mountpoint -q "${mount_path}" && umount "${mount_path}" || true
fi
}
# Detect system directory relevant to the other, trying to find the ones associated on the current dataset or snapshot/
# System directory should be at most a direct child dataset of main datasets (no recursivity)
# We can fallback trying other zfs pools if no match has been found.
# $1 is our current dataset name (which can have @snapshot name)
# $2 directory path we look for (cannot contains /)
# $3 restrict_to_same_pool (true|false) force looking for dataset with the same basename in the current dataset pool only
# $4 is the temporary mount directory to use
# $5 is the optional etc directory (if not $2 is not etc itself)
# return path for directory (which can be a mountpoint)
get_system_directory() {
local dataset_path="$1"
local directory="$2"
local restrict_to_same_pool="$3"
local mntdir="$4"
local etc_dir="$5"
if [ -z "${etc_dir}" ]; then
etc_dir="${mntdir}/etc"
fi
local candidate_path="${mntdir}/${directory}"
# 1. Look for /etc/fstab first (which will mount even on top of non empty $directory)
local mounted_fstab_entry="false"
if [ -f "${etc_dir}/fstab" ]; then
mount_args=$(awk '/^[^#].*[ \t]\/'"${directory}"'[ \t]/ {print "-t", $3, $1}' "${etc_dir}/fstab")
if [ -n "${mount_args}" ]; then
mounted_fstab_entry="true"
mount -o noatime ${mount_args} "${candidate_path}" || mounted_fstab_entry="false"
fi
fi
# If directory isn't empty. Only count if coming from /etc/fstab. Will be
# handled below otherwise as we are interested in potential snapshots.
if [ "${mounted_fstab_entry}" = "true" -a -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
echo "${candidate_path}"
return
fi
# 2. Handle zfs case, which can be a snapshots.
local base_dataset_path="${dataset_path}"
local snapshot_name=""
# For snapshots we extract the parent dataset
if echo "${dataset_path}" | grep -q '@'; then
base_dataset_path=$(echo "${dataset_path}" | cut -d '@' -f1)
snapshot_name=$(echo "${dataset_path}" | cut -d '@' -f2)
fi
base_dataset_name="${base_dataset_path##*/}"
base_pool="$(echo "${base_dataset_path}" | cut -d'/' -f1)"
# 2.a) Look for child dataset included in base dataset, which needs to hold same snapshot if any
candidate_path=$(validate_system_dataset "${base_dataset_path}/${directory}" "${directory}" "${mntdir}" "${snapshot_name}")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
# 2.b) Look for current dataset (which is already mounted as /)
candidate_path="${mntdir}/${directory}"
if [ -n "${snapshot_name}" ]; then
# WORKAROUND a bug https://github.com/zfsonlinux/zfs/issues/9958
# Reading the content of a snapshot fails if it is not the first mount
# for a given dataset
first_mntdir=$(awk '{if ($1 == "'${base_dataset_path}'") {print $2; exit;}}' /proc/mounts)
if [ "${first_mntdir}" = "/" ]; then
# prevents // on candidate_path
first_mntdir=""
fi
candidate_path="${first_mntdir}/.zfs/snapshot/${snapshot_name}/${directory}"
fi
if [ -n "$(ls ${candidate_path} 2>/dev/null)" ]; then
echo "${candidate_path}"
return
fi
# 2.c) Look for every datasets in every pool which isn't the current dataset which holds:
# - the same dataset name (last section) than our base_dataset_name
# - mountpoint=directory
# - canmount!=off
all_same_base_dataset_name="$(zfs list -H -t filesystem -o name,canmount | awk '/^[^ ]+\/'"${base_dataset_name}"'[ \t](on|noauto)/ {print $1}') "
# order by local pool datasets first
current_pool_same_base_datasets=""
other_pools_same_base_datasets=""
root_pool=$(echo "${dataset_path%%/*}")
for d in ${all_same_base_dataset_name}; do
cur_dataset_pool=$(echo "${d%%/*}")
if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
current_pool_same_base_datasets="${current_pool_same_base_datasets} ${d}"
else
other_pools_same_base_datasets="${other_pools_same_base_datasets} ${d}"
fi
done
ordered_same_base_datasets="${current_pool_same_base_datasets} ${other_pools_same_base_datasets}"
if [ "${restrict_to_same_pool}" = "true" ]; then
ordered_same_base_datasets="${current_pool_same_base_datasets}"
fi
# now, loop over them
for d in ${ordered_same_base_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
# check mountpoint match
candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
if [ -z "${candidate_dataset}" ]; then
continue
fi
candidate_path=$(validate_system_dataset "${candidate_dataset}" "${directory}" "${mntdir}" "${snapshot_name}")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
done
# 2.d) If we didn't find anything yet: check for persistent datasets corresponding to our mountpoint, with canmount=on without any snapshot associated:
# Note: we go over previous datasets as well, but this is ok, as we didn't include them before.
all_mountable_datasets="$(zfs list -t filesystem -o name,canmount | awk '/^[^ ]+[ \t]+on/ {print $1}')"
# order by local pool datasets first
current_pool_datasets=""
other_pools_datasets=""
root_pool=$(echo "${dataset_path%%/*}")
for d in ${all_mountable_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
if echo "${cur_dataset_pool}" | grep -wq "${root_pool}" 2>/dev/null ; then
current_pool_datasets="${current_pool_datasets} ${d}"
else
other_pools_datasets="${other_pools_datasets} ${d}"
fi
done
ordered_datasets="${current_pool_datasets} ${other_pools_datasets}"
if [ "${restrict_to_same_pool}" = "true" ]; then
ordered_datasets="${current_pool_datasets}"
fi
for d in ${ordered_datasets}; do
cur_dataset_pool=$(echo "${d%%/*}")
rel_pool_root=$(zpool get -H altroot ${cur_dataset_pool} | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
# check mountpoint match
candidate_dataset=$(zfs get -H mountpoint ${d} | grep -E "mountpoint\s${rel_pool_root}/${directory}\s" | awk '{print $1}')
if [ -z "${candidate_dataset}" ]; then
continue
fi
candidate_path=$(validate_system_dataset "${d}" "${directory}" "${mntdir}" "")
if [ -n "${candidate_path}" ]; then
echo "${candidate_path}"
return
fi
done
grub_warn "Failed to find a valid directory '${directory}' for dataset '${dataset_path}'. Ignoring"
return
}
# Try our default layout bpool as a prefered layout (fast path)
# This is get_system_directory for boot optimized for our default installation layout
# $1 is our current dataset name (which can have @snapshot name)
# $2 is the temporary mount directory to use
# return path for directory (which can be a mountpoint) if found
try_default_layout_bpool() {
local root_dataset_path="$1"
local mntdir="$2"
dataset_basename="${root_dataset_path##*/}"
candidate_dataset="bpool/BOOT/${dataset_basename}"
dataset_properties="$(zfs get -H mountpoint,canmount ${candidate_dataset} | cut -f3 | paste -sd ' ')"
if [ -z "${dataset_properties}" ]; then
return
fi
rel_pool_root=$(zpool get -H altroot bpool | awk '{print $3}')
if [ "${rel_pool_root}" = "-" ]; then
rel_pool_root=""
fi
snapshot_name="${dataset_basename##*@}"
[ "${snapshot_name}" = "${dataset_basename}" ] && snapshot_name=""
if [ -z "${snapshot_name}" ]; then
if ! echo "${dataset_properties}" | grep -Eq "${rel_pool_root}/boot (on|noauto)"; then
return
fi
else
candidate_dataset=$(echo "${candidate_dataset}" | cut -d '@' -f1)
fi
validate_system_dataset "${candidate_dataset}" "boot" "${mntdir}" "${snapshot_name}"
}
# Return if secure boot is enabled on that system
is_secure_boot_enabled() {
if LANG=C mokutil --sb-state 2>/dev/null | grep -qi enabled; then
echo "true"
return
fi
echo "false"
return
}
# Given a filesystem or snapshot dataset, returns dataset|machine id|pretty name|last used
# $1 is dataset we want information from
# $2 is the temporary mount directory to use
get_dataset_info() {
local dataset="$1"
local mntdir="$2"
local base_dataset="${dataset}"
local etc_dir="${mntdir}/etc"
local is_snapshot="false"
# For snapshot we extract the parent dataset
if echo "${dataset}" | grep -q '@'; then
base_dataset=$(echo "${dataset}" | cut -d '@' -f1)
is_snapshot="true"
fi
mount -o noatime,zfsutil -t zfs "${base_dataset}" "${mntdir}"
# read machine-id/os-release from /etc
etc_dir=$(get_system_directory "${dataset}" "etc" "true" "${mntdir}" "")
if [ -z "${etc_dir}" ]; then
grub_warn "Ignoring ${dataset}"
mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
umount "${mntdir}"
return
fi
machine_id=""
if [ -f "${etc_dir}/machine-id" ]; then
machine_id=$(cat "${etc_dir}/machine-id")
fi
# We have to use a random temporary id if we don't have any machine-id file or if this one is empty
# (mostly the case of new installations before first boot).
# Let's use the dataset name directly for this.
# Consequence is that all datasets are then separated.
if [ -z "${machine_id}" ]; then
machine_id="${dataset}"
fi
pretty_name=$(. "${etc_dir}/os-release" && echo "${PRETTY_NAME}")
mountpoint -q "${mntdir}/etc" && umount "${mntdir}/etc" || true
# read available kernels from /boot
boot_dir="$(try_default_layout_bpool "${dataset}" "${mntdir}")"
if [ -z "${boot_dir}" ]; then
boot_dir=$(get_system_directory "${dataset}" "boot" "false" "${mntdir}" "${etc_dir}")
fi
if [ -z "${boot_dir}" ]; then
grub_warn "Ignoring ${dataset}"
mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
umount "${mntdir}"
return
fi
initrd_list=""
kernel_list=""
list=$(find "${boot_dir}" -maxdepth 1 -type f -regex '.*/\(vmlinuz\|vmlinux\|kernel\)-.*')
while [ "x$list" != "x" ] ; do
linux=`version_find_latest $list`
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
if ! grub_file_is_not_garbage "${linux}" ; then
continue
fi
# Filters entry if efi/non efi.
# Note that for now we allow kernel without .efi.signed as those are signed kernel
# on ubuntu, loaded by the shim.
case "${linux}" in
*.efi.signed)
if [ "$(is_secure_boot_enabled)" = "false" ]; then
continue
fi
;;
esac
linux_basename=$(basename "${linux}")
linux_dirname=$(dirname "${linux}")
version=$(echo "${linux_basename}" | sed -e "s,^[^0-9]*-,,g")
alt_version=$(echo "${version}" | sed -e "s,\.old$,,g")
gettext_printf "Found linux image: %s in %s\n" "${linux_basename}" "${dataset}" >&2
initrd=""
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
if test -e "${linux_dirname}/${i}" ; then
initrd="$i"
break
fi
done
if test -z "${initrd}" ; then
grub_warn "Couldn't find any valid initrd for dataset ${dataset}."
continue
fi
gettext_printf "Found initrd image: %s in %s\n" "${initrd}" "${dataset}" >&2
rel_linux_dirname=$(make_system_path_relative_to_its_root "${linux_dirname}")
initrd_list="${initrd_list}|${rel_linux_dirname}/${initrd}"
kernel_list="${kernel_list}|${rel_linux_dirname}/${linux_basename}"
done
initrd_list="${initrd_list#|}"
kernel_list="${kernel_list#|}"
initrd_device=$(${grub_probe} --target=device "${boot_dir}" | head -1)
mountpoint -q "${mntdir}/boot" && umount "${mntdir}/boot" || true
# We needed to look in / for snapshots on root dataset, umount there before zfs lazily unmount it
case "${boot_dir}" in /boot/.zfs/snapshot/*)
umount "${boot_dir}" || true
;;
esac
# for zsys snapshots: we want to know which kernel we successful last booted with
last_booted_kernel=$(zfs get -H com.ubuntu.zsys:last-booted-kernel "${dataset}" | awk '{print $3}')
# snapshot: last_used is dataset creation time
if [ "${is_snapshot}" = "true" ]; then
last_used="$(zfs get -pH creation "${dataset}" | awk -F '\t' '{print $3}')"
# otherwise, last_used is manually marked at boot/shutdown on a root dataset for zsys
else
# if current system, take current time
if zfs mount | awk '/[ \t]+\/$/ {print $1}' | grep -q ${dataset}; then
last_used=$(date +%s)
else
last_used=$(zfs get -H com.ubuntu.zsys:last-used "${dataset}" | awk '{print $3}')
# case of non zsys, or zsys without annotation, take /etc/machine-id stat (as we mounted with noatime).
# However, as systems can be relatime, if system is current mounted one, set current time (case of clone + reboot
# within the same d).
if [ "${last_used}" = "-" ]; then
last_used=$(stat --printf="%X" "${mntdir}/etc/os-release")
if [ -f "${mntdir}/etc/machine-id" ]; then
last_used=$(stat --printf="%X" "${mntdir}/etc/machine-id")
fi
fi
fi
fi
is_zsys=$(zfs get -H com.ubuntu.zsys:bootfs "${base_dataset}" | awk '{print $3}')
if [ -n "${initrd_list}" -a -n "${kernel_list}" ]; then
echo "${dataset}\t${is_zsys}\t${machine_id}\t${pretty_name}\t${last_used}\t${initrd_device}\t${initrd_list}\t${kernel_list}\t${last_booted_kernel}"
else
grub_warn "didn't find any valid initrd or kernel."
fi
umount "${mntdir}" || true
# We needed to look in / for snapshots on root dataset, umount the snapshot for etc before zfs lazily unmount it
case "${etc_dir}" in /.zfs/snapshot/*/etc)
snapshot_path="$(findmnt -n -o TARGET -T ${etc_dir})"
umount "${snapshot_path}" || true
;;
esac
}
# Scan available boot options and returns in a formatted list
# $1 is the temporary mount directory to use
bootlist() {
local mntdir="$1"
local boot_list=""
for dataset in $(get_root_datasets); do
# get information from current root dataset
boot_list="${boot_list}$(get_dataset_info ${dataset} ${mntdir})\n"
# get information from snapshots of this root dataset
for snapshot_dataset in $(zfs list -H -o name -t snapshot "${dataset}"); do
boot_list="${boot_list}$(get_dataset_info ${snapshot_dataset} ${mntdir})\n"
done
done
echo "${boot_list}"
}
# Order machine ids by last_used from their main entry
get_machines_sorted() {
local bootlist="$1"
local machineids="$(echo "${bootlist}" | awk '{print $3}' | sort -u)"
for machineid in ${machineids}; do
echo "${bootlist}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/ {print $5, $3}' | sort -nr | grep -E "[^^]\b${machineid}\b" | head -1
done | sort -nr | awk '{print $2}'
}
# Sort entries by last_used for a given machineid
sort_entries_for_machineid() {
local bootlist="$1"
local machineid="$2"
tab="$(printf '\t')"
echo "${bootlist}" | grep -E "[^^]\b${machineid}\b" | sort -k5,5r -k1,1 -t "${tab}"
}
# Return main entry index
get_main_entry() {
local entries="$1"
echo "${entries}" | awk 'BEGIN{FS="\t"} $1 !~ /.*@.*/ {print}' | head -1
}
# Return specific field at index from entry
get_field_from_entry() {
local entry="$1"
local index="$2"
echo "${entry}" | awk "BEGIN{FS=\"\t\"} {print \$$index}"
}
# Get the main entry metadata
main_entry_meta() {
local main_entry="$1"
initrd=$(get_field_from_entry "${main_entry}" 7 | cut -d'|' -f1)
kernel=$(get_field_from_entry "${main_entry}" 8 | cut -d'|' -f1)
# Take first element (most recent entry) which is not a snapshot
echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"main\", \$4, \$1, \$6, \"$initrd\", \"$kernel\"}"
}
# Get advanced entries metadata
advanced_entries_meta() {
local main_entry="$1"
last_used_kernel="$(get_field_from_entry "${main_entry}" 9 )"
# We must align initrds with kernels.
# Adds initrds to the stack then pop them 1 by 1 as we process the kernels
set -- $(get_field_from_entry "${main_entry}" 7 | tr "|" " ")
for kernel in $(get_field_from_entry "${main_entry}" 8 | tr "|" " "); do
# get initrd and pop to the next one
initrd="$1"; shift
was_last_used_kernel="false"
kernel_basename=$(basename "${kernel}")
if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
was_last_used_kernel="true"
fi
echo "${main_entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"advanced\", \$4, \$1, \$6, \"$initrd\", \"$kernel\", \"$was_last_used_kernel\"}"
done
}
# Get history metadata
history_entries_meta() {
local entries="$1"
local main_dataset_name="$2"
local main_dataset_releasename="$3"
if [ -z "${entries}" ]; then
return
fi
# Traverse snapshots and clones
echo "${entries}" | while read entry; do
name=""
# Compute snapshot/filesystem dataset name
snap_dataset_name="$(get_field_from_entry "${entry}" 1)"
snapname="${snap_dataset_name##*@}"
# If, this is a clone, take what is after main_dataset_name
if [ "${snapname}" = "${snap_dataset_name}" ]; then
snapname="${snap_dataset_name##${main_dataset_name}_}"
# Handle manual user clone (not prefixed by "main_dataset_name")
snapname="${snapname##*/}"
fi
# We keep the snapname only if it is not only a zsys auto snapshot
if echo "${snapname}" | grep -q "^autozsys_"; then
snapname=""
fi
# We store the release only if it different from main dataset release (snapshot before a release upgrade)
releasename=$(get_field_from_entry "${entry}" 4)
if [ "${releasename}" = "${main_dataset_releasename}" ]; then
releasename=""
fi
# Snapshot date
foo="$(get_field_from_entry "${entry}" 5)"
snapdate="$(date -d @$(get_field_from_entry "${entry}" 5) "+%x @ %H:%M")"
# For snapshots/clones the name can have the following formats:
# <DATE>: autozsys, same release
# <OLD_RELEASE> on <DATE>: autozsys, different release
# <SNAPNAME> on <DATE>: Manual snapshot, same release
# <SNAPNAME>, <OLD_RELEASE> on <DATE>: Manual snapshot, different release
if [ "${snapname}" = "" -a "${releasename}" = "" ]; then
name="${snapdate}"
elif [ "${snapname}" = "" -a "${releasename}" != "" ]; then
name=$(gettext_printf "%s on %s" "${releasename}" "${snapdate}")
elif [ "${snapname}" != "" -a "${releasename}" = "" ]; then
name=$(gettext_printf "%s on %s" "${snapname}" "${snapdate}")
else # snapname != "" && releasename != ""
name=$(gettext_printf "%s, %s on %s" "${snapname}" "${releasename}" "${snapdate}")
fi
# Choose kernel and initrd if the snapshot was booted successfully on a specific kernel before
# Take latest by default if no match
initrd=$(get_field_from_entry "${entry}" 7 | cut -d'|' -f1)
kernel=$(get_field_from_entry "${entry}" 8 | cut -d'|' -f1)
last_used_kernel="$(get_field_from_entry "${entry}" 9)"
# We must align initrds with kernels.
# Adds initrds to the stack then pop them 1 by 1 as we process the kernels
set -- $(get_field_from_entry "${entry}" 7 | tr "|" " ")
for k in $(get_field_from_entry "${entry}" 8|tr "|" " "); do
# get initrd and pop to the next one
candidate_initrd="$1"; shift
kernel_basename=$(basename "${k}")
if [ "${kernel_basename}" = "${last_used_kernel}" ]; then
kernel="${k}"
initrd="${candidate_initrd}"
break
fi
done
echo "${entry}" | awk "BEGIN{ FS=\"\t\"; OFS=\"\t\"} {print \$3, \$2, \"history\", \"$name\", \$1, \$6, \"$initrd\", \"$kernel\"}"
done
}
# Generate metadata from a BOOTLIST that will subsequently used to generate
# the final grub menu entries
generate_grub_menu_metadata() {
local bootlist="$1"
# Sort machineids by last_used from their main entry
for machineid in $(get_machines_sorted "${bootlist}"); do
entries="$(sort_entries_for_machineid "${bootlist}" ${machineid})"
main_entry="$(get_main_entry "${entries}")"
if [ -z "$main_entry" ]; then
continue
fi
main_entry_meta "${main_entry}"
advanced_entries_meta "${main_entry}"
main_dataset_name="$(get_field_from_entry "${main_entry}" 1)"
main_dataset_releasename="$(get_field_from_entry "${main_entry}" 4)"
# grep -v errcode != 0 if there is no match. || true to not fail with -e
other_entries="$(echo "${entries}" | grep -v "${main_entry}" || true)"
history_entries_meta "${other_entries}" "${main_dataset_name}" "${main_dataset_releasename}"
done
}
# Print the configuration part common to all sections
# Note:
# If 10_linux runs these part will be defined twice in grub configuration
print_menu_prologue() {
cat << 'EOF'
function gfxmode {
set gfxpayload="${1}"
EOF
if [ "${vt_handoff}" = 1 ]; then
cat << 'EOF'
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
EOF
fi
cat << EOF
}
EOF
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
GRUB_GFXPAYLOAD_LINUX="${GRUB_GFXPAYLOAD_LINUX:-}"
if [ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 0 ]; then
echo "set linux_gfx_mode=${GRUB_GFXPAYLOAD_LINUX}"
else
cat << EOF
if [ "\${recordfail}" != 1 ]; then
if [ -e \${prefix}/gfxblacklist.txt ]; then
if hwmatch \${prefix}/gfxblacklist.txt 3; then
if [ \${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
}
# Cache for prepare_grub_to_access_device call
# $1: boot_device
# $2: submenu_level
prepare_grub_to_access_device_cached() {
local boot_device="$1"
local submenu_level="$2"
local boot_device_idx="$(echo ${boot_device} | tr '/' '_')"
cache_file="${ZFSTMP}/$(echo boot_device${boot_device_idx})"
if [ ! -f "${cache_file}" ]; then
set +u
echo "$(prepare_grub_to_access_device "${boot_device}")" > "${cache_file}"
set -u
for i in 0 1 2; do
submenu_indentation="$(printf %${i}s | tr " " "${grub_tab}")"
sed "s/^/${submenu_indentation} /" "${cache_file}" > "${cache_file}--${i}"
done
fi
cat "${cache_file}--${submenu_level}"
}
# Print a grub menu entry
zfs_linux_entry () {
submenu_level="$1"
title="$2"
type="$3"
dataset="$4"
boot_device="$5"
initrd="$6"
kernel="$7"
kernel_version="$8"
kernel_additional_args="${9:-}"
boot_devices="${10:-}"
submenu_indentation="$(printf %${submenu_level}s | tr " " "${grub_tab}")"
echo "${submenu_indentation}menuentry '$(echo "${title}" | grub_quote)' ${CLASS} \${menuentry_id_option} 'gnulinux-${dataset}-${kernel_version}' {"
if [ "${quick_boot}" = 1 ]; then
echo "${submenu_indentation} recordfail"
fi
if [ "${type}" != "recovery" ] ; then
GRUB_SAVEDEFAULT=${GRUB_SAVEDEFAULT:-}
default_entry="$(save_default_entry)"
if [ -n "${default_entry}" ]; then
echo "${submenu_indentation} ${default_entry}"
fi
fi
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "${GRUB_GFXPAYLOAD_LINUX}" = "" ]; then
echo "${submenu_indentation} load_video"
else
if [ "${GRUB_GFXPAYLOAD_LINUX}" != "text" ]; then
echo "${submenu_indentation} load_video"
fi
fi
if ([ "${ubuntu_recovery}" = 0 ] || [ "${type}" != "recovery" ]) && \
([ "${GRUB_GFXPAYLOAD_LINUX}" != "" ] || [ "${gfxpayload_dynamic}" = 1 ]); then
echo "${submenu_indentation} gfxmode \${linux_gfx_mode}"
fi
echo "${submenu_indentation} insmod gzio"
echo "${submenu_indentation} if [ \"\${grub_platform}\" = xen ]; then insmod xzio; insmod lzopio; fi"
if [ -n "$boot_devices" ]; then
for device in ${boot_devices}; do
echo "${submenu_indentation} if [ "${boot_device}" = "${device}" ]; then"
echo "$(prepare_grub_to_access_device_cached "${device}" $(( submenu_level +1 )) )"
echo "${submenu_indentation} fi"
done
else
echo "$(prepare_grub_to_access_device_cached "${boot_device}" "${submenu_level}")"
fi
if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
echo "${submenu_indentation} echo $(gettext_printf "Loading Linux %s ..." ${kernel_version} | grub_quote)"
fi
linux_default_args="${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ ${type} = "recovery" ]; then
linux_default_args="${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
fi
echo "${submenu_indentation} linux ${kernel} root=ZFS=${dataset} ro ${linux_default_args} ${kernel_additional_args}"
if [ "${quiet_boot}" = 0 ] || [ "${type}" != simple ]; then
echo "${submenu_indentation} echo '$(gettext_printf "Loading initial ramdisk ..." | grub_quote)'"
fi
echo "${submenu_indentation} initrd ${initrd}"
echo "${submenu_indentation}}"
}
# Generate a GRUB Menu from menu meta data
# $1 menu metadata
generate_grub_menu() {
local menu_metadata="$1"
local last_section=""
local main_dataset_name=""
local main_dataset=""
local have_zsys=""
if [ -z "${menu_metadata}" ]; then
return
fi
CLASS="--class gnu-linux --class gnu --class os"
if [ "${GRUB_DISTRIBUTOR}" = "" ] ; then
OS=GNU/Linux
else
case ${GRUB_DISTRIBUTOR} in
Ubuntu|Kubuntu)
OS="${GRUB_DISTRIBUTOR}"
;;
*)
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
;;
esac
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1 | LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
if [ -x /lib/recovery-mode/recovery-menu ]; then
GRUB_CMDLINE_LINUX_RECOVERY=recovery
else
GRUB_CMDLINE_LINUX_RECOVERY=single
fi
if [ "${ubuntu_recovery}" = 1 ]; then
GRUB_CMDLINE_LINUX_RECOVERY="${GRUB_CMDLINE_LINUX_RECOVERY} nomodeset"
fi
case "$GENKERNEL_ARCH" in
x86*) GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY dis_ucode_ldr";;
esac
if [ "${vt_handoff}" = 1 ]; then
for word in ${GRUB_CMDLINE_LINUX_DEFAULT}; do
if [ "${word}" = splash ]; then
GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_DEFAULT} \${vt_handoff}"
fi
done
fi
print_menu_prologue
cat<<'EOF'
function zsyshistorymenu {
# $1: root dataset (eg rpool/ROOT/ubuntu_2zhm07@autozsys_k56fr6)
# $2: boot device id (eg 411f29ce1557bfed)
# $3: initrd (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/initrd.img-5.4.0-21-generic)
# $4: kernel (eg /BOOT/ubuntu_2zhm07@autozsys_k56fr6/vmlinuz-5.4.0-21-generic)
# $5: kernel_version (eg 5.4.0-21-generic)
set root_dataset="${1}"
set boot_device="${2}"
set initrd="${3}"
set kernel="${4}"
set kversion="${5}"
EOF
boot_devices=$(echo "${menu_metadata}" | cut -d"$(printf '\t')" -f6 | sort -u)
title=$(gettext_printf "Revert system only")
zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
title="$(gettext_printf "Revert system and user data")"
zfs_linux_entry 1 "${title}" "simple" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "Revert system only (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' '' "${boot_devices}"
title="$(gettext_printf "Revert system and user data (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" '${root_dataset}' '${boot_device}' '${initrd}' '${kernel}' '${kversion}' 'zsys-revert=userdata' "${boot_devices}"
fi
echo "}"
echo
# IFS is set to TAB (ASCII 0x09)
echo "${menu_metadata}" |
{
at_least_one_entry=0
have_zsys="$(which zsysd || true)"
while IFS="$(printf '\t')" read -r machineid iszsys section name dataset device initrd kernel opt; do
# Disable history for non zsys system or if systems is a zsys one and zsys isn't installed.
# In pure zfs systems, we identified multiple issues due to the mount generator
# in upstream zfs which makes it incompatible. Don't show history for now.
if [ "${section}" = "history" ]; then
if [ "${iszsys}" != "yes" ] || [ "${iszsys}" = "yes" -a -z "${have_zsys}" ]; then
continue
fi
fi
if [ "${last_section}" != "${section}" -a -n "${last_section}" ]; then
# Close previous section wrapper
if [ "${last_section}" != "main" ]; then
echo "}" # Add grub_tabs
at_least_one_entry=0
fi
fi
case "${section}" in
main)
title="${name}"
main_dataset_name="${name}"
main_dataset="${dataset}"
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
zfs_linux_entry 0 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
at_least_one_entry=1
;;
advanced)
# normal and recovery entries for a given kernel
if [ "${last_section}" != "${section}" ]; then
echo "submenu '$(gettext_printf "Advanced options for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-advanced-${main_dataset}' {"
fi
last_booted_kernel_marker=""
if [ "${opt}" = "true" ]; then
last_booted_kernel_marker="* "
fi
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
title="$(gettext_printf "%s%s, with Linux %s" "${last_booted_kernel_marker}" "${name}" "${kernel_version}")"
zfs_linux_entry 1 "${title}" "advanced" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
GRUB_DISABLE_RECOVERY=${GRUB_DISABLE_RECOVERY:-}
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "%s%s, with Linux %s (%s)" "${last_booted_kernel_marker}" "${name}" "${kernel_version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 1 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
fi
at_least_one_entry=1
;;
history)
# Revert to a snapshot
# revert system, revert system and user data and associated recovery entries
if [ "${last_section}" != "${section}" ]; then
echo "submenu '$(gettext_printf "History for %s" "${main_dataset_name}" | grub_quote)' \${menuentry_id_option} 'gnulinux-history-${main_dataset}' {"
fi
if [ "${iszsys}" = "yes" ]; then
title="$(gettext_printf "Revert to %s" "${name}" | grub_quote)"
else
title="$(gettext_printf "Boot on %s" "${name}" | grub_quote)"
fi
echo " submenu '${title}' \${menuentry_id_option} 'gnulinux-history-${dataset}' {"
kernel_version=$(basename "${kernel}" | sed -e "s,^[^0-9]*-,,g")
# Zsys only: let revert system without destroying snapshots
if [ "${iszsys}" = "yes" ]; then
echo "${grub_tab}${grub_tab}zsyshistorymenu" \"${dataset}\" \"${device}\" \"${initrd}\" \"${kernel}\" \"${kernel_version}\"
# Non-zsys: boot temporarly on snapshots or rollback (destroying intermediate snapshots)
else
title="$(gettext_printf "One time boot")"
zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
GRUB_DISABLE_RECOVERY="${GRUB_DISABLE_RECOVERY:-}"
if [ "${GRUB_DISABLE_RECOVERY}" != "true" ]; then
title="$(gettext_printf "One time boot (%s)" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
zfs_linux_entry 2 "${title}" "recovery" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}"
fi
title="$(gettext_printf "Revert system (all intermediate snapshots will be destroyed)")"
zfs_linux_entry 2 "${title}" "simple" "${dataset}" "${device}" "${initrd}" "${kernel}" "${kernel_version}" "rollback=yes"
fi
echo " }"
at_least_one_entry=1
;;
*)
grub_warn "unknown section: ${section}. Ignoring entry ${name} for ${dataset}"
;;
esac
last_section="${section}"
done
if [ "${at_least_one_entry}" -eq 1 ]; then
echo "}"
fi
}
}
# don't add trailing newline of variable is empty
# $1: content to write
# $2: destination file
trailing_newline_if_not_empty() {
content="$1"
dest="$2"
if [ -z "${content}" ]; then
rm -f "${dest}"
touch "${dest}"
return
fi
echo "${content}" > "${dest}"
}
GRUB_LINUX_ZFS_TEST="${GRUB_LINUX_ZFS_TEST:-}"
case "${GRUB_LINUX_ZFS_TEST}" in
bootlist)
# Import all available pools on the system and return imported list
imported_pools=$(import_pools)
boot_list="$(bootlist ${MNTDIR})"
trailing_newline_if_not_empty "${boot_list}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
metamenu)
boot_list="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
trailing_newline_if_not_empty "${menu_metadata}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
grubmenu)
menu_metadata="$(cat ${GRUB_LINUX_ZFS_TEST_INPUT})"
grub_menu=$(generate_grub_menu "${menu_metadata}")
trailing_newline_if_not_empty "${grub_menu}" "${GRUB_LINUX_ZFS_TEST_OUTPUT}"
break
;;
*)
# Import all available pools on the system and return imported list
imported_pools=$(import_pools)
# Generate the complete list of boot entries
boot_list="$(bootlist ${MNTDIR})"
# Create boot menu meta data from the list of boot entries
menu_metadata="$(generate_grub_menu_metadata "${boot_list}")"
# Create boot menu meta data from the list of boot entries
grub_menu="$(generate_grub_menu "${menu_metadata}")"
if [ -n "${grub_menu}" ]; then
# We want the trailing newline as a marker will be added
echo "${grub_menu}"
fi
;;
esac
========================= sda6/etc/grub.d/33_linux_xen =========================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
CLASS="--class gnu-linux --class gnu --class os --class xen"
SUPPORTED_INITS="sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
OS=GNU/Linux
else
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
/dev/loop/*|/dev/loop[0-9])
GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
# We can't cope with devices loop-mounted from files here.
case ${GRUB_DEVICE} in
/dev/*) ;;
*) exit 0 ;;
esac
;;
esac
# Default to disabling partition uuid support to maintian compatibility with
# older kernels.
GRUB_DISABLE_LINUX_PARTUUID=${GRUB_DISABLE_LINUX_PARTUUID-true}
# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if ( [ "x${GRUB_DEVICE_UUID}" = "x" ] && [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] ) \
|| ( [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
&& [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ] ) \
|| ( ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
&& ! test -e "/dev/disk/by-partuuid/${GRUB_DEVICE_PARTUUID}" ) \
|| ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
LINUX_ROOT_DEVICE=${GRUB_DEVICE}
elif [ "x${GRUB_DEVICE_UUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ]; then
LINUX_ROOT_DEVICE=PARTUUID=${GRUB_DEVICE_PARTUUID}
else
LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
# Allow overriding GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT.
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE}" ]; then
GRUB_CMDLINE_LINUX="${GRUB_CMDLINE_LINUX_XEN_REPLACE}"
fi
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}" ]; then
GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}"
fi
case x"$GRUB_FS" in
xbtrfs)
rootsubvol="`make_system_path_relative_to_its_root /`"
rootsubvol="${rootsubvol#/}"
if [ "x${rootsubvol}" != x ]; then
GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
fi;;
xzfs)
rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
;;
esac
title_correction_code=
linux_entry ()
{
os="$1"
version="$2"
xen_version="$3"
type="$4"
args="$5"
xen_args="$6"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ x$type != xsimple ] ; then
if [ x$type = xrecovery ] ; then
title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
elif [ "${type#init-}" != "$type" ] ; then
title="$(gettext_printf "%s, with Xen %s and Linux %s (%s)" "${os}" "${xen_version}" "${version}" "${type#init-}")"
else
title="$(gettext_printf "%s, with Xen %s and Linux %s" "${os}" "${xen_version}" "${version}")"
fi
replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
if [ x"Xen ${xen_version}>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
fi
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
else
title="$(gettext_printf "%s, with Xen hypervisor" "${os}")"
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
fi
if [ x$type != xrecovery ] ; then
save_default_entry | grub_add_tab | sed "s/^/$submenu_indentation/"
fi
if [ -z "${prepare_boot_cache}" ]; then
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
fi
printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
xmessage="$(gettext_printf "Loading Xen %s ..." ${xen_version})"
lmessage="$(gettext_printf "Loading Linux %s ..." ${version})"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$xmessage" | grub_quote)'
if [ "\$grub_platform" = "pc" -o "\$grub_platform" = "" ]; then
xen_rm_opts=
else
xen_rm_opts="no-real-mode edd=off"
fi
${xen_loader} ${rel_xen_dirname}/${xen_basename} placeholder ${xen_args} \${xen_rm_opts}
echo '$(echo "$lmessage" | grub_quote)'
${module_loader} ${rel_dirname}/${basename} placeholder root=${linux_root_device_thisversion} ro ${args}
EOF
if test -n "${initrd}" ; then
# TRANSLATORS: ramdisk isn't identifier. Should be translated.
message="$(gettext_printf "Loading initial ramdisk ...")"
initrd_path=
for i in ${initrd}; do
initrd_path="${initrd_path} ${rel_dirname}/${i}"
done
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
${module_loader} --nounzip $(echo $initrd_path)
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
linux_list=
for i in /boot/vmlinu[xz]-* /vmlinu[xz]-* /boot/kernel-*; do
if grub_file_is_not_garbage "$i"; then
basename=$(basename $i)
version=$(echo $basename | sed -e "s,^[^0-9]*-,,g")
dirname=$(dirname $i)
config=
for j in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
if test -e "${j}" ; then
config="${j}"
break
fi
done
if (grep -qx "CONFIG_XEN_DOM0=y" "${config}" 2> /dev/null || grep -qx "CONFIG_XEN_PRIVILEGED_GUEST=y" "${config}" 2> /dev/null); then linux_list="$linux_list $i" ; fi
fi
done
if [ "x${linux_list}" = "x" ] ; then
exit 0
fi
file_is_not_sym () {
case "$1" in
*/xen-syms-*)
return 1;;
*)
return 0;;
esac
}
xen_list=
for i in /boot/xen*; do
if grub_file_is_not_garbage "$i" && file_is_not_sym "$i" ; then xen_list="$xen_list $i" ; fi
done
prepare_boot_cache=
boot_device_id=
title_correction_code=
machine=`uname -m`
case "$machine" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="$machine" ;;
esac
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
while [ "x${xen_list}" != "x" ] ; do
list="${linux_list}"
current_xen=`version_find_latest $xen_list`
xen_basename=`basename ${current_xen}`
xen_dirname=`dirname ${current_xen}`
rel_xen_dirname=`make_system_path_relative_to_its_root $xen_dirname`
xen_version=`echo $xen_basename | sed -e "s,.gz$,,g;s,^xen-,,g"`
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ "x$is_top_level" != xtrue ]; then
echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
fi
if ($grub_file --is-arm64-efi $current_xen); then
xen_loader="xen_hypervisor"
module_loader="xen_module"
else
if ($grub_file --is-x86-multiboot2 $current_xen); then
xen_loader="multiboot2"
module_loader="module2"
else
xen_loader="multiboot"
module_loader="module"
fi
fi
initrd_early=
for i in ${GRUB_EARLY_INITRD_LINUX_STOCK} \
${GRUB_EARLY_INITRD_LINUX_CUSTOM}; do
if test -e "${xen_dirname}/${i}" ; then
initrd_early="${initrd_early} ${i}"
fi
done
while [ "x$list" != "x" ] ; do
linux=`version_find_latest $list`
gettext_printf "Found linux image: %s\n" "$linux" >&2
basename=`basename $linux`
dirname=`dirname $linux`
rel_dirname=`make_system_path_relative_to_its_root $dirname`
version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
alt_version=`echo $version | sed -e "s,\.old$,,g"`
linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
initrd_real=
for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
"initrd-${version}" "initramfs-${version}.img" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}" ; do
if test -e "${dirname}/${i}" ; then
initrd_real="$i"
break
fi
done
initrd=
if test -n "${initrd_early}" || test -n "${initrd_real}"; then
initrd="${initrd_early} ${initrd_real}"
initrd_display=
for i in ${initrd}; do
initrd_display="${initrd_display} ${dirname}/${i}"
done
gettext_printf "Found initrd image: %s\n" "$(echo $initrd_display)" >&2
fi
if test -z "${initrd_real}"; then
# "UUID=" magic is parsed by initrds. Since there's no initrd, it can't work here.
if [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ]; then
linux_root_device_thisversion=${GRUB_DEVICE}
else
linux_root_device_thisversion=PARTUUID=${GRUB_DEVICE_PARTUUID}
fi
fi
if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
linux_entry "${OS}" "${version}" "${xen_version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
submenu_indentation="$grub_tab$grub_tab"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s (with Xen hypervisor)" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
echo " submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
is_top_level=false
fi
linux_entry "${OS}" "${version}" "${xen_version}" advanced \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
for supported_init in ${SUPPORTED_INITS}; do
init_path="${supported_init#*:}"
if [ -x "${init_path}" ] && [ "$(readlink -f /sbin/init)" != "$(readlink -f "${init_path}")" ]; then
linux_entry "${OS}" "${version}" "${xen_version}" "init-${supported_init%%:*}" \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
fi
done
if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
linux_entry "${OS}" "${version}" "${xen_version}" recovery \
"single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}"
fi
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
done
if [ x"$is_top_level" != xtrue ]; then
echo ' }'
fi
xen_list=`echo $xen_list | tr ' ' '\n' | fgrep -vx "$current_xen" | tr '\n' ' '`
done
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
echo '}'
fi
echo "$title_correction_code"
====================== sda6/etc/grub.d/34_os-prober_proxy ======================
#!/bin/sh
#THIS IS A GRUB PROXY SCRIPT
'/etc/grub.d/proxifiedScripts/os-prober' | /etc/grub.d/bin/grubcfg_proxy "-'Windows Boot Manager (sur /dev/sda2)'~21dbcd29401c68d4e45566775f1f57fe~
+*
+#text
+'Windows Boot Manager (sur /dev/nvme0n1p1)'~16ba88dd91655ffed4ef5914c37954e4~
"
======================= sda6/etc/grub.d/35_uefi-firmware =======================
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2012 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
. "${datarootdir}/grub/grub-mkconfig_lib"
efi_vars_dir=/sys/firmware/efi/vars
EFI_GLOBAL_VARIABLE=8be4df61-93ca-11d2-aa0d-00e098032b8c
OsIndications="$efi_vars_dir/OsIndicationsSupported-$EFI_GLOBAL_VARIABLE/data"
if [ -e "$OsIndications" ] && \
[ "$(( $(printf 0x%x \'"$(cat $OsIndications | cut -b1)") & 1 ))" = 1 ]; then
LABEL="UEFI Firmware Settings"
gettext_printf "Adding boot menu entry for UEFI Firmware Settings\n" >&2
onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
cat << EOF
menuentry '$LABEL' \$menuentry_id_option 'uefi-firmware' {
fwsetup
}
EOF
fi
======================== Unknown MBRs/Boot Sectors/etc =========================
/dev/nvme0n1p1: unknown GPT attributes
8000000000000000
/dev/nvme0n1p2: unknown GPT attributes
8000000000000000
/dev/sda5: unknown GPT attributes
8000000000000001
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to sign-grub) and reinstall the grub-efi-amd64-signed of
sda6,
using the following options: sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix use-standard-efi-file restore-efi-backups
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 20.04.3 LTS CurrentSession entry (sda2/efi/****/shim****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\shim****.efi (**** will be updated in the final message)Quelqu'un pourrait-il m'aider?
Merci d'avance.
Ordinateur portable HP Probook
Ubuntu 20.04, dual boot Windows 10
The one who wears the crown is not the king necessarily.
Hors ligne
#2 Le 13/09/2021, à 11:54
- geole
Re : Démarrage impossible (écran noir)
Bonjour.
Je note que tu peux démarrer avec un ancien noyau
Dans un premier temps, fais les dernières mises à jour en cas de correction du problème.
sudo apt updatesudo apt upgradeLes grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#3 Le 13/09/2021, à 17:06
- madeinmars
Re : Démarrage impossible (écran noir)
Bonjour geole, et merci.
après update et upgrade, le problème demeure.
The one who wears the crown is not the king necessarily.
Hors ligne
#4 Le 13/09/2021, à 17:29
- geole
Re : Démarrage impossible (écran noir)
Il faudrait que tu regardes si tu ne pas installer un pilote graphique propriétaire. https://doc.ubuntu-fr.org/gestionnaire_ … prietaires
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 13/09/2021, à 17:38
- madeinmars
Re : Démarrage impossible (écran noir)
Malheureusement, je suis dans le cas où aucun pilote propriétaire n'est disponible.
The one who wears the crown is not the king necessarily.
Hors ligne
#6 Le 13/09/2021, à 17:53
- geole
Re : Démarrage impossible (écran noir)
Si, lorsque tu bootes en mode recovery puis resume, la présentation graphique te convient, on peut généraliser.
Il faut modifier, avec un éditeur de texte, le fichier /etc/default/grub pour ajouter l'option nomodeset après les options quiet splash . La ligne devient alors
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"puis faire prendre en charge avec la commande
sudo update-grubSinon, il faudra mettre d'autres options à trouver.
Dernière modification par geole (Le 13/09/2021, à 17:59)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#7 Le 13/09/2021, à 18:18
- madeinmars
Re : Démarrage impossible (écran noir)
J'ai fait comme tu m'as dit, mais la résolution est vraiment mauvaise (1400 x 1050) sans possibilité de la changer.
Mais ça l'a donné une idee; j'ai un peu triché du coup. J'ai utilisé Grub Customizer pour "faire remonter" la version qui fonctionne bien.
Je sais, les puristes vont me détester, mais je peux pas faire mieux pour l'instant.
Merci à toi en tout cas.
The one who wears the crown is not the king necessarily.
Hors ligne
#8 Le 13/09/2021, à 19:01
- geole
Re : Démarrage impossible (écran noir)
Quelle idée d'utiliser grub-custumer alors que c'est paramétable facilement par le grub
voir paragraphe 2.3 de https://doc.ubuntu-fr.org/tutoriel/grub … age_manuel
C'est la première ligne du fichier de parametre
probablement GRUB_DEFAULT=1>2
Pour changer de résolution, c'est le paramètre vga=xxx Voir paragraphe 3.3 du même document
Si tu as une idée de la résolution qui est bonne, il existe une table de correspondance.
Mais je pense que le pilote graphique nouveau finira par être réparé.
Dernière modification par geole (Le 13/09/2021, à 19:16)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#9 Le 14/09/2021, à 17:31
- madeinmars
Re : Démarrage impossible (écran noir)
Oui, je sais... Mais je suis du genre flemmard et j'ai donc une préférence pour une interface graphique.
Je sais, j'ai un peu honte. 
Mais j'essaierai avec les paramètres que tu me dis; juste par souci de perfectionnisme.
Merci en tout cas.
The one who wears the crown is not the king necessarily.
Hors ligne