#1 Le 25/11/2021, à 00:29
- hibiki.tokay
ata2.00: failed to set xfermode (err_mask=0x40)
Bonjour
Je suis sous 18.04LTS
avec 2 ssd (1x64go pour le systéme et 1x500go pour le home)
Ce jour vers 18h je suis sortie et mon pc fonctionnait bien. A mon retour vers 20h mon pc était en écran noir avec une ligne de texte en haut.
Je redémarre le pc mais rien ne ce passe (attente plus de 30min)
Je redémarre une nouvelle fois et la j'ai ça qui s'affiche
[ 7.137274] ata2.00: failed to set xfermode (err_mask=0x40)
[ 12.512116] ata2.00: failed to set xfermode (err_mask=0x40)
[ 17.886958] ata2.00: failed to set xfermode (err_mask=0x40)
Gave up waiting for suspend/resume device
Gave up waiting for root file system device. Common problèms:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! UUID=********************* does not exist. Dropping to a shell!
BusyBox v1.27.2(Ubuntu 1:1.27.2ubuntu3.3) Built in shell (ash)
enter 'Help' for a list of a built in commands.
(initramfs)
En premier j'ai fait un
(initramfs) blkid -c /dev/null
/dev/sda1: UUID=*****************Type="ext4" PARTUUID=******
(initramfs)
Donc il ne voie que un seul des deux disques (le home)
j'ai redémarré sur une session live
Le disque home est bien vu mais pas l'autre disque
J'ai ouvert l'utilitaire disque.
Idem le home est vue mais pas l'autre.
J'ai tenté avec Gparted.
Idem le home est vue mais pas l'autre.
J'ai redémarré et ouvert de bios.
Les deux disques sont bien vue.
J'ai pris le disque et l'ai placé dans un boitier externe.
Le disque fonctionne bien et je voie tous les dossiers.
J'ai changé le câble sata.
Idem le disque système n'est pas vue
Pourriez vous me dire ce que je dois faire pour récupérer mon système comme il ce doit
Merci
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#2 Le 25/11/2021, à 09:21
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Bonjour
Comme vue sur d'autre poste je suis aller voir si les disques sont toujours en AHCI et c'est bien le cas.
Je viens de faire le test comme si je voulais réinstaller ubuntu.
Seul le disque de 500go est vue lors de l'étape de chois du partitionnement.
Dernière modification par hibiki.tokay (Le 25/11/2021, à 09:44)
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#3 Le 25/11/2021, à 13:16
- geole
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Bonjour.
Essaie de booter en mettant le paramètre rootdelay=300
Voir paragraphe 7.2 de https://doc.ubuntu-fr.org/kernel pour le mettre au démarrage,
Essaie aussi de permuter les câbles sata uniquement au niveau de la carte mère.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#4 Le 25/11/2021, à 13:44
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Bonjour
Bonjour.
Essaie de booter en mettant le paramètre rootdelay=300
Voir paragraphe 7.2 de https://doc.ubuntu-fr.org/kernel pour le mettre au démarrage,
Essaie aussi de permuter les câbles sata uniquement au niveau de la carte mère.
Même chose, le rootdelay=300 n'a rien changé
En ce qui concerne le câble, J'ai intervertie les câbles des 2 ssd et c'est pareil, je vois le 500go mais pas le 60go
Merci
Dernière modification par hibiki.tokay (Le 25/11/2021, à 13:45)
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#5 Le 25/11/2021, à 13:52
- geole
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Pour l'inversion des câbles,
Ne pas toucher à l'extrémité connectée aux SSD mais permuter uniquement l'extrémité connectée à la carte mère.
Si toujours en échec, tu as la solution de secours avec le SSD connecté en USB.
Il n'y a pas de raison que cela ne puisse pas booter.
Si cela ne boote pas, fais un rapport boot-info en utilisant un support d'installation et donne l'url qui sera générée. https://doc.ubuntu-fr.org/tutoriel/boot-info
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#6 Le 25/11/2021, à 19:27
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
rien ne fonctionne.
Lien du rapport boot-info
https://paste.ubuntu.com/p/G9nBp2bN4Q/
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#7 Le 25/11/2021, à 19:29
- xubu1957
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Bonjour,
Collage du boot-info :
View raw Copy to clipboard
boot-info-4ppa130 [20211125_1724]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid addc271e-df72-4095-a3cc-997d85b684e8 root hd1,msdos5
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
================================ 0 OS detected =================================
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
Live-session OS is Ubuntu 64-bit (Ubuntu 20.04.2 LTS, focal, x86_64)
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 0005
Timeout: 1 seconds
BootOrder: 0005,0001,0003,0004
Boot0001* Hard Drive BBS(HD,,0x0)..GO..NO........o.S.a.m.s.u.n.g. .S.S.D. .8.4.0. .E.V.O. .5.0.0.G.B....................A...........................>..Gd-.;.A..MQ..L.1.S.H.D.S.N.F.A.3.6.5.9.9.3. .X. . . . ........BO..NO........o.L.D.L.C....................A...........................>..Gd-.;.A..MQ..L.0.1.0.1.2.2.7.1.0.E.3.2. .7. . . . . . ........BO
Boot0003* CD/DVD Drive BBS(CDROM,,0x0)..GO..NO........o.T.S.S.T.c.o.r.p. .C.D.D.V.D.W. .S.H.-.S.2.2.3.F....................A...........................>..Gd-.;.A..MQ..L. . . . . . . . . . . . . . . . . . . . ........BO
Boot0004* USB BBS(USB,,0x0)..GO..NO........[.L.e.x.a.r. .C.F. .U.S.B._.3._.0. .R.e.a.d.L.X.0.1....................A..........................Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.7.6.4.3........BO..NO........`.L.e.x.a.r. .S.D. .U.S.B._.3._.0. .R.e.a.d.L.X.0.1....................A...............................Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.7.6.4.3........BO..NO........`.L.e.x.a.r. .M.S. .U.S.B._.3._.0. .R.e.a.d.L.X.0.1....................A...............................Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.7.6.4.3........BO..NO........`.L.e.x.a.r. .M.S.D. .U.S.B._.3._.0. .R.e.a.d.L.X.0.1....................A...............................Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.7.6.4.3........BO..NO........`.L.e.x.a.r. .X.D. .U.S.B._.3._.0. .R.e.a.d.L.X.0.1....................A...............................Gd-.;.A..MQ..L.0.0.0.0.0.0.0.0.7.6.4.3........BO
Boot0005* UEFI: TSSTcorp CDDVDW SH-S223F PciRoot(0x0)/Pci(0x17,0x0)/Sata(5,65535,0)/CDROM(1,0x1a9,0x1f40)..BO
This session has been detected as 'live' because df -Th / contains overlay
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
fdisk -l (filtered): ___________________________________________________________
Disk sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x0a039ddf
Boot Start End Sectors Size Id Type
sda1 * 2048 976771579 976769532 465.8G 83 Linux
parted -lm (filtered): _________________________________________________________
sda:500GB:scsi:512:512:msdos:ATA Samsung SSD 840:;
1:1049kB:500GB:500GB:ext4::boot;
sr0:2877MB:scsi:2048:2048:mac:TSSTcorp CDDVDW SH-S223F:;
1:2048B:6143B:4096B::Apple:;
2:870kB:4966kB:4096kB::EFI:;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
└─sda1 ext4 ea4f470c-6778-4fb0-8fb9-e852d248916b 0a039ddf-01
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 375.4G 13% /mnt/boot-sav/sda1
Mount options: __________________________________________________________________
sda1 rw,relatime
========= Devices which don't seem to have a corresponding hard drive ==========
sdb sdc sdd sde sdf
=============================== StdErr Messages ================================
File descriptor 63 (pipe:[111150]) leaked on lvs invocation. Parent PID 22766: /bin/bash
/dev/sdb: open failed: Aucun support trouvé
/dev/sdc: open failed: Aucun support trouvé
/dev/sdd: open failed: Aucun support trouvé
/dev/sde: open failed: Aucun support trouvé
/dev/sdf: open failed: Aucun support trouvé
/dev/sdb: open failed: Aucun support trouvé
/dev/sdc: open failed: Aucun support trouvé
/dev/sdd: open failed: Aucun support trouvé
/dev/sde: open failed: Aucun support trouvé
/dev/sdf: open failed: Aucun support trouvé
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would not act on the boot.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#8 Le 25/11/2021, à 19:34
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Merci.
Je ne vois pas le disque de 60go non plus sur le boot-info.
J'ai retesté le disque dans un boitier usb, il fonctionne bien (je l'ouvre et vois ce qu'il y a dedans) par contre impossible de booter dessus il n'est pas vus dans le bios (en usb)
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#9 Le 25/11/2021, à 19:41
- geole
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Merci.
Je ne vois pas le disque de 60go non plus sur le boot-info.J'ai retesté le disque dans un boitier usb, il fonctionne bien (je l'ouvre et vois ce qu'il y a dedans) par contre impossible de booter dessus il n'est pas vus dans le bios (en usb)
Ce m'est pas grave.
Ton gros disque sda de 500 go a cela
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid addc271e-df72-4095-a3cc-997d85b684e8 root hd1,msdos5
set prefix=($root)'/boot/grub'
Donc si tu dis au bios de booter sur le SDA actuel , la première partie du grub va exécuter cette recherche
search.fs_uuid addc271e-df72-4095-a3cc-997d85b684e8 root hd1,msdos5
Le problème est que si le petit SSD de 64 go était branché en USB au moment du boot-info, on ne le voit pas.
Dernière modification par geole (Le 25/11/2021, à 19:42)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#10 Le 25/11/2021, à 19:56
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Non non j'ai remis le disque de 60go en sata avant de redémarrer
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#11 Le 26/11/2021, à 17:22
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Pensez vous que la seul solution soit de faire une réinstallation?
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#12 Le 26/11/2021, à 20:01
- geole
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Bonsoir.
Tu peux réinstaller sur le SSD de 500 Go, ou mettre ton SSD de 64 Go sur support USB et booter normalement. Le gros SSD de 500 Go sera devenu SDA et il partira à la recherche du petit ssd qu'il devrait bien détecter en USB à condition que son contenu soit resté correct.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#13 Le 27/11/2021, à 12:55
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Ca m’embête mais je pense que je vais formater le 60go et voir si je peut réinstaller ubuntu 18.04 dessus. j'aurais préféré pouvoir récupérer le système mais avec tous ce que j'ai trouvé, ça semble pas trop évident
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#14 Le 27/11/2021, à 19:08
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Bon bien... même après formatage et tentative de réinstallation ce disque n'est pas vue si je le branche directement sur le carte
J'ai tenté :
En lieu et place de l'autre disque (même câbles que l'autre)
En changeant de connecteurs (énergie et data)
En changeant de câbles (énergie et data)
Si je le branche en usb il est détecté???
La je ne comprend pas.
Mais bon ça m’apprendra a acheter du LDLC
Je vais réinstaller directement sur l'autre disque en laissant le processus d'installation choisir (je crois que c'est LVM)
Mais bon c'est vraiment bizard ce truc
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#15 Le 27/11/2021, à 19:19
- iznobe
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Bonsoir peux tu donner le lien du disque en question stp ?
et comment c' est possible de brancher une disque SATA en USB , y a un boitier dans lequel tu le places avec adaptateur SATA => USB ? desolé j ' ai du mal a voir de quoi il s' agit exactement ...
Dernière modification par iznobe (Le 27/11/2021, à 19:20)
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#16 Le 27/11/2021, à 19:34
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
Bonsoir peux tu donner le lien du disque en question stp ?
pour le disque c'est https://www.ldlc.com/fr-be/fiche/PB00200480.html acheté le 27 juillet 2018
et comment c' est possible de brancher une disque SATA en USB , y a un boitier dans lequel tu le places avec adaptateur SATA => USB ? desolé j ' ai du mal a voir de quoi il s' agit exactement ...
Oui effectivement c'est les restes d'un disque externe que j'avais. J'ai récupéré la partie interface SATA USB
Dernière modification par hibiki.tokay (Le 27/11/2021, à 19:36)
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#17 Le 27/11/2021, à 19:49
- iznobe
Re : ata2.00: failed to set xfermode (err_mask=0x40)
ok là je comprends mieux , c ' est effectivement bizzare qu il fonctionne avec un adapteur USB , mais pas en direct sur la CM .
sur ta carte mere tu n' as que 2 ports SATA ? j ' aurais plutot inciminé un cable , mais comme tu dis deja avoir testé .
essaie sur un autre ports SATA que les 2 ou etaient deja les disques auparavant , si il y a des ports SATA de couleur differente encore mieux essiae ceux là , c ' est un autre controleur .
essaie de voir si tu peux mettre a jour le firmware de ton SSD , vu que c' est la marque ldlc , j' ai bien peur que ca soit compliqué .
quoi que , branche le SSD via l' adptateur USB puis passe la commande suivante :
sudo lshw -sanitize
et
sudo hdparm -I /dev/sda
sudo hdparm -I /dev/sdb
on aura peut etre un bonne surprise .
tu devrais aussi mettre a jour le BIOS de la carte mere , le probleme peut venir d' elle .
Dernière modification par iznobe (Le 27/11/2021, à 19:51)
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#18 Le 27/11/2021, à 20:32
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
sur ta carte mere tu n' as que 2 ports SATA ? j ' aurais plutot inciminé un cable , mais comme tu dis deja avoir testé .
essaie sur un autre ports SATA que les 2 ou etaient deja les disques auparavant , si il y a des ports SATA de couleur differente encore mieux essiae ceux là , c ' est un autre controleur .
J'ai testé sur plusieurs ports, et surtout le port qui vois le 500go ne vois pas le 60go (ATTENTION la carte mere le vois mais lors de la tentative de boot ou d’installation ubuntu ne le vois pas lui)
essaie de voir si tu peux mettre a jour le firmware de ton SSD , vu que c' est la marque ldlc , j' ai bien peur que ca soit compliqué .
Ca risque de ne pas ce faire car en régle général il faut un windob ou un mac or je n'ai ni l'un ni l'autre.
quoi que , branche le SSD via l' adptateur USB puis passe la commande suivante :
sudo lshw -sanitize
sudo lshw -sanitize
computer
description: Ordinateur de Bureau
produit: To Be Filled By O.E.M. (To Be Filled By O.E.M.)
fabriquant: To Be Filled By O.E.M.
version: To Be Filled By O.E.M.
numéro de série: [REMOVED]
bits: 64 bits
fonctionnalités: smbios-3.1 dmi-3.1 smp vsyscall32
configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=[REMOVED]
*-core
description: Carte mère
produit: H370M-ITX/ac
fabriquant: ASRock
identifiant matériel: 0
numéro de série: [REMOVED]
*-firmware
description: BIOS
fabriquant: American Megatrends Inc.
identifiant matériel: 0
version: P4.20
date: 12/05/2019
taille: 64KiB
capacité: 15MiB
fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
*-memory
description: Mémoire Système
identifiant matériel: a
emplacement: Carte mère
taille: 16GiB
*-bank:0
description: DIMM DDR4 Synchrone 2133 MHz (0,5 ns)
produit: F4-2400C15-16GIS
fabriquant: Fujitsu
identifiant matériel: 0
numéro de série: [REMOVED]
emplacement: ChannelA-DIMM0
taille: 16GiB
bits: 64 bits
horloge: 2133MHz (0.5ns)
*-bank:1
description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: PO-Revision-Date: 2016-09-03 00:48+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [vide]
identifiant matériel: 1
emplacement: ChannelB-DIMM0
*-cache:0
description: L1 cache
identifiant matériel: 13
emplacement: L1 Cache
taille: 384KiB
capacité: 384KiB
fonctionnalités: synchronous internal write-back unified
configuration: level=1
*-cache:1
description: L2 cache
identifiant matériel: 14
emplacement: L2 Cache
taille: 1536KiB
capacité: 1536KiB
fonctionnalités: synchronous internal write-back unified
configuration: level=2
*-cache:2
description: L3 cache
identifiant matériel: 15
emplacement: L3 Cache
taille: 9MiB
capacité: 9MiB
fonctionnalités: synchronous internal write-back unified
configuration: level=3
*-cpu
description: CPU
produit: Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz
fabriquant: Intel Corp.
identifiant matériel: 16
information bus: cpu@0
version: Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz
numéro de série: [REMOVED]
emplacement: CPUSocket
taille: 1292MHz
capacité: 4005MHz
bits: 64 bits
horloge: 100MHz
fonctionnalités: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d cpufreq
configuration: cores=6 enabledcores=6 threads=6
*-pci
description: Host bridge
produit: 8th Gen Core Processor Host Bridge/DRAM Registers
fabriquant: Intel Corporation
identifiant matériel: 100
information bus: pci@0000:00:00.0
version: 07
bits: 32 bits
horloge: 33MHz
configuration: driver=skl_uncore
ressources: irq:0
*-pci:0
description: PCI bridge
produit: Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16)
fabriquant: Intel Corporation
identifiant matériel: 1
information bus: pci@0000:00:01.0
version: 07
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:16 portE/S:4000(taille=4096) mémoire:a2000000-a30fffff portE/S:90000000(taille=301989888)
*-display
description: VGA compatible controller
produit: GP107 [GeForce GTX 1050 Ti]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
ressources: irq:133 mémoire:a2000000-a2ffffff mémoire:90000000-9fffffff mémoire:a0000000-a1ffffff portE/S:4000(taille=128) mémoire:c0000-dffff
*-multimedia
description: Audio device
produit: GP107GL High Definition Audio Controller
fabriquant: NVIDIA Corporation
identifiant matériel: 0.1
information bus: pci@0000:01:00.1
version: a1
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
ressources: irq:17 mémoire:a3080000-a3083fff
*-generic
description: Signal processing controller
produit: Cannon Lake PCH Thermal Controller
fabriquant: Intel Corporation
identifiant matériel: 12
information bus: pci@0000:00:12.0
version: 10
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi cap_list
configuration: driver=intel_pch_thermal latency=0
ressources: irq:16 mémoire:a343d000-a343dfff
*-usb
description: USB controller
produit: Cannon Lake PCH USB 3.1 xHCI Host Controller
fabriquant: Intel Corporation
identifiant matériel: 14
information bus: pci@0000:00:14.0
version: 10
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
ressources: irq:123 mémoire:a3420000-a342ffff
*-usbhost:0
produit: xHCI Host Controller
fabriquant: Linux 4.15.0-162-generic xhci-hcd
identifiant matériel: 0
information bus: usb@1
nom logique: usb1
version: 4.15
fonctionnalités: usb-2.00
configuration: driver=hub slots=16 speed=480Mbit/s
*-usb:0
description: Concentrateur USB
produit: USB2.0 Hub
fabriquant: VIA Labs, Inc.
identifiant matériel: 3
information bus: usb@1:3
version: 90.30
fonctionnalités: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb:1
description: Concentrateur USB
produit: 4-Port USB 2.0 Hub
fabriquant: Generic
identifiant matériel: 5
information bus: usb@1:5
version: 1.13
fonctionnalités: usb-2.10
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb:2
description: Concentrateur USB
produit: 4-Port USB 2.0 Hub
fabriquant: Generic
identifiant matériel: 6
information bus: usb@1:6
version: 1.13
fonctionnalités: usb-2.10
configuration: driver=hub slots=2 speed=480Mbit/s
*-usb:3
description: Périphérique de stockage de masse
produit: USB to ATA/ATAPI bridge
fabriquant: JMicron
identifiant matériel: 7
information bus: usb@1:7
nom logique: scsi7
version: 1.00
numéro de série: [REMOVED]
fonctionnalités: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=2mA speed=480Mbit/s
*-disk
description: SCSI Disk
fabriquant: LDLC
identifiant matériel: 0.0.0
information bus: scsi@7:0.0.0
nom logique: /dev/sdg
numéro de série: [REMOVED]
taille: 55GiB (60GB)
configuration: ansiversion=2 logicalsectorsize=512 sectorsize=512 signature=b2a51163
*-usb:4
description: Souris
produit: USB Optical Mouse
fabriquant: PixArt
identifiant matériel: 9
information bus: usb@1:9
version: 1.00
fonctionnalités: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
*-usb:5
description: Clavier
produit: Logitech Illuminated Keyboard
fabriquant: Logitech
identifiant matériel: a
information bus: usb@1:a
version: 55.03
fonctionnalités: usb-2.00
configuration: driver=usbhid maxpower=300mA speed=12Mbit/s
*-usb:6
description: Interface sans fil Bluetooth
fabriquant: Intel Corp.
identifiant matériel: e
information bus: usb@1:e
version: 0.01
fonctionnalités: bluetooth usb-2.00
configuration: driver=btusb maxpower=100mA speed=12Mbit/s
*-usbhost:1
produit: xHCI Host Controller
fabriquant: Linux 4.15.0-162-generic xhci-hcd
identifiant matériel: 1
information bus: usb@2
nom logique: usb2
version: 4.15
fonctionnalités: usb-3.10
configuration: driver=hub slots=8 speed=10000Mbit/s
*-usb:0
description: Périphérique de stockage de masse
produit: USB_3_0 Reader
fabriquant: Lexar
identifiant matériel: 1
information bus: usb@2:1
nom logique: scsi6
version: 0.01
numéro de série: [REMOVED]
fonctionnalités: usb-3.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=896mA speed=5000Mbit/s
*-disk:0
description: SCSI Disk
produit: CF USB_3_0 Read
fabriquant: Lexar
identifiant matériel: 0.0.0
information bus: scsi@6:0.0.0
nom logique: /dev/sdb
version: LX01
numéro de série: [REMOVED]
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdb
*-disk:1
description: SCSI Disk
produit: SD USB_3_0 Read
fabriquant: Lexar
identifiant matériel: 0.0.1
information bus: scsi@6:0.0.1
nom logique: /dev/sdc
version: LX01
numéro de série: [REMOVED]
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdc
*-disk:2
description: SCSI Disk
produit: MS USB_3_0 Read
fabriquant: Lexar
identifiant matériel: 0.0.2
information bus: scsi@6:0.0.2
nom logique: /dev/sdd
version: LX01
numéro de série: [REMOVED]
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdd
*-disk:3
description: SCSI Disk
produit: MSD USB_3_0 Read
fabriquant: Lexar
identifiant matériel: 0.0.3
information bus: scsi@6:0.0.3
nom logique: /dev/sde
version: LX01
numéro de série: [REMOVED]
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sde
*-disk:4
description: SCSI Disk
produit: XD USB_3_0 Read
fabriquant: Lexar
identifiant matériel: 0.0.4
information bus: scsi@6:0.0.4
nom logique: /dev/sdf
version: LX01
numéro de série: [REMOVED]
fonctionnalités: removable
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512
*-medium
identifiant matériel: 0
nom logique: /dev/sdf
*-usb:1
description: Concentrateur USB
produit: USB3.0 Hub
fabriquant: VIA Labs, Inc.
identifiant matériel: 2
information bus: usb@2:2
version: 90.31
fonctionnalités: usb-3.00
configuration: driver=hub slots=4 speed=5000Mbit/s
*-usb:2
description: Concentrateur USB
produit: 4-Port USB 3.0 Hub
fabriquant: Generic
identifiant matériel: 5
information bus: usb@2:5
version: 1.13
fonctionnalités: usb-3.00
configuration: driver=hub slots=2 speed=5000Mbit/s
*-usb:3
description: Concentrateur USB
produit: 4-Port USB 3.0 Hub
fabriquant: Generic
identifiant matériel: 6
information bus: usb@2:6
version: 1.13
fonctionnalités: usb-3.00
configuration: driver=hub slots=2 speed=5000Mbit/s
*-memory NON-RÉCLAMÉ
description: RAM memory
produit: Cannon Lake PCH Shared SRAM
fabriquant: Intel Corporation
identifiant matériel: 14.2
information bus: pci@0000:00:14.2
version: 10
bits: 64 bits
horloge: 33MHz (30.3ns)
fonctionnalités: pm cap_list
configuration: latency=0
ressources: mémoire:a3436000-a3437fff mémoire:a343c000-a343cfff
*-communication
description: Communication controller
produit: Cannon Lake PCH HECI Controller
fabriquant: Intel Corporation
identifiant matériel: 16
information bus: pci@0000:00:16.0
version: 10
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=mei_me latency=0
ressources: irq:131 mémoire:a343b000-a343bfff
*-storage
description: SATA controller
produit: Cannon Lake PCH SATA AHCI Controller
fabriquant: Intel Corporation
identifiant matériel: 17
information bus: pci@0000:00:17.0
version: 10
bits: 32 bits
horloge: 66MHz
fonctionnalités: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
ressources: irq:124 mémoire:a3434000-a3435fff mémoire:a343a000-a343a0ff portE/S:5050(taille=8) portE/S:5040(taille=4) portE/S:5020(taille=32) mémoire:a3439000-a34397ff
*-pci:1
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c
information bus: pci@0000:00:1c.0
version: f0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:121 portE/S:3000(taille=4096) mémoire:a3300000-a33fffff
*-network
description: Ethernet interface
produit: I211 Gigabit Network Connection
fabriquant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: enp2s0
version: 03
numéro de série: [REMOVED]
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi msix pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=igb driverversion=5.4.0-k duplex=full firmware=0. 4-1 ip=[REMOVED] latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
ressources: irq:17 mémoire:a3300000-a331ffff portE/S:3000(taille=32) mémoire:a3320000-a3323fff
*-pci:2
description: PCI bridge
produit: Intel Corporation
fabriquant: Intel Corporation
identifiant matériel: 1c.6
information bus: pci@0000:00:1c.6
version: f0
bits: 32 bits
horloge: 33MHz
fonctionnalités: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
ressources: irq:122 mémoire:a3200000-a32fffff
*-network
description: Interface réseau sans fil
produit: Dual Band Wireless-AC 3168NGW [Stone Peak]
fabriquant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:03:00.0
nom logique: wlp3s0
version: 10
numéro de série: [REMOVED]
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.15.0-162-generic firmware=29.1044073957.0 latency=0 link=no multicast=yes wireless=IEEE 802.11
ressources: irq:132 mémoire:a3200000-a3201fff
*-isa
description: ISA bridge
produit: H370 Chipset LPC/eSPI Controller
fabriquant: Intel Corporation
identifiant matériel: 1f
information bus: pci@0000:00:1f.0
version: 10
bits: 32 bits
horloge: 33MHz
fonctionnalités: isa bus_master
configuration: latency=0
*-multimedia
description: Audio device
produit: Cannon Lake PCH cAVS
fabriquant: Intel Corporation
identifiant matériel: 1f.3
information bus: pci@0000:00:1f.3
version: 10
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list
configuration: driver=snd_hda_intel latency=32
ressources: irq:134 mémoire:a3430000-a3433fff mémoire:a3100000-a31fffff
*-serial:0 NON-RÉCLAMÉ
description: SMBus
produit: Cannon Lake PCH SMBus Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.4
information bus: pci@0000:00:1f.4
version: 10
bits: 64 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:a3438000-a34380ff portE/S:efa0(taille=32)
*-serial:1 NON-RÉCLAMÉ
description: Serial bus controller
produit: Cannon Lake PCH SPI Controller
fabriquant: Intel Corporation
identifiant matériel: 1f.5
information bus: pci@0000:00:1f.5
version: 10
bits: 32 bits
horloge: 33MHz
configuration: latency=0
ressources: mémoire:fe010000-fe010fff
*-network
description: Ethernet interface
produit: Ethernet Connection (7) I219-V
fabriquant: Intel Corporation
identifiant matériel: 1f.6
information bus: pci@0000:00:1f.6
nom logique: eno1
version: 10
numéro de série: [REMOVED]
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 32 bits
horloge: 33MHz
fonctionnalités: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.5-4 ip=[REMOVED] latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
ressources: irq:125 mémoire:a3400000-a341ffff
*-scsi:0
identifiant matériel: 1
nom logique: scsi0
fonctionnalités: emulated
*-disk
description: ATA Disk
produit: Samsung SSD 840
identifiant matériel: 0.0.0
information bus: scsi@0:0.0.0
nom logique: /dev/sda
version: BB6Q
numéro de série: [REMOVED]
taille: 465GiB (500GB)
fonctionnalités: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=9e24a672-4e2b-48ef-bce9-3e6d22475708 logicalsectorsize=512 sectorsize=512
*-volume:0 NON-RÉCLAMÉ
description: Windows FAT volume
fabriquant: mkfs.fat
identifiant matériel: 1
information bus: scsi@0:0.0.0,1
version: FAT32
numéro de série: [REMOVED]
taille: 510MiB
capacité: 511MiB
fonctionnalités: boot fat initialized
configuration: FATs=2 filesystem=fat
*-volume:1
description: LVM Physical Volume
fabriquant: Linux
identifiant matériel: 2
information bus: scsi@0:0.0.0,2
nom logique: /dev/sda2
numéro de série: [REMOVED]
taille: 465GiB
fonctionnalités: multi lvm2
*-scsi:1
identifiant matériel: 2
nom logique: scsi5
fonctionnalités: emulated
*-cdrom
description: DVD-RAM writer
produit: CDDVDW SH-S223F
fabriquant: TSSTcorp
identifiant matériel: 0.0.0
information bus: scsi@5:0.0.0
nom logique: /dev/cdrom
nom logique: /dev/cdrw
nom logique: /dev/dvd
nom logique: /dev/dvdrw
nom logique: /dev/sr0
version: SB03
fonctionnalités: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
et
sudo hdparm -I /dev/sda sudo hdparm -I /dev/sdb
sudo hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: Samsung SSD 840 EVO 500GB
Serial Number: S1DHNSAF639539X
Firmware Revision: EXT0BB6Q
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x0039)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = 1
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Asynchronous notification (eg. media change)
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
* reserved 69[4]
* DOWNLOAD MICROCODE DMA command
* SET MAX SETPASSWORD/UNLOCK DMA commands
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 8 blocks)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 8min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50025388a04f5dd3
NAA : 5
IEEE OUI : 002538
Unique ID : 8a04f5dd3
Checksum: correct
$ sudo hdparm -I /dev/sdb
/dev/sdb:
SG_IO: bad/missing sense data, sb[]: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ATA device, with non-removable media
Standards:
Likely used: 1
Configuration:
Logical max current
cylinders 0 0
heads 0 0
sectors/track 0 0
--
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 0 MBytes
device size with M = 1000*1000: 0 MBytes
cache/buffer size = unknown
Capabilities:
IORDY not likely
Cannot perform double-word IO
R/W multiple sector transfer: not supported
DMA: not supported
PIO: pio0
tu devrais aussi mettre a jour le BIOS de la carte mere , le probleme peut venir d' elle
je ne vois pas pourquoi?? ila trés bien fonctionné jusqua ce problème
Dernière modification par hibiki.tokay (Le 27/11/2021, à 20:42)
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#19 Le 27/11/2021, à 20:50
- iznobe
Re : ata2.00: failed to set xfermode (err_mask=0x40)
ok , j ' ai bien noté qu 'en fait le probleme est que le disque est reconnu dans le bios mais pas dans ubuntu.
ton disque est bien reconnu connecté en USB sur le peripherique SDG
*-disk
description: SCSI Disk
fabriquant: LDLC
identifiant matériel: 0.0.0
information bus: scsi@7:0.0.0
nom logique: /dev/sdg
numéro de série: [REMOVED]
taille: 55GiB (60GB)
configuration: ansiversion=2 logicalsectorsize=512 sectorsize=512 signature=b2a51163
essaie donc la commande suivante pour obtenir plus d' info :
sudo hdparm -I /dev/sdg
Mais ca ne nous en dira pas plus sur le probleme logiciel , meme si on cerne deja mieux la problematique .
tu pourrais aussi donner un rapport smartctl de ce disque connecté en USB afin qu on visualise son etat : voir ici pour la procedure : https://doc.ubuntu-fr.org/smartmontools
et pour aller au bout du truc , je recommanderais aussi un scan du systeme de fichier : voir ici : https://doc.ubuntu-fr.org/fsck
Dernière modification par iznobe (Le 27/11/2021, à 20:56)
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#20 Le 27/11/2021, à 21:10
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
/dev/sdg:
ATA device, with non-removable media
Model Number: LDLC
Serial Number: 10102217E0237
Firmware Revision: P0831A
Media Serial Num:
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 117231408
LBA48 user addressable sectors: 117231408
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 57241 MBytes
device size with M = 1000*1000: 60022 MBytes (60 GB)
cache/buffer size = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = 1
Advanced power management level: disabled
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
* SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
DMA Setup Auto-Activate optimization
* Software settings preservation
Device Sleep (DEVSLP)
* DOWNLOAD MICROCODE DMA command
* Data Set Management TRIM supported (limit 8 blocks)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 0000000000000000
NAA : 0
IEEE OUI : 000000
Unique ID : 000000000
The running kernel lacks CONFIG_IDE_TASK_IOCTL support for this device.
Checksum: correct
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#21 Le 27/11/2021, à 21:12
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
le truc c'est que comme indiqué dans le poste j'ai formaté le disque en vu e de la réinstallation (qui n'a pas fonctionné)
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#22 Le 27/11/2021, à 21:23
- iznobe
Re : ata2.00: failed to set xfermode (err_mask=0x40)
pas grave donne au moins le smartctl .
et ensuite supprime la table de partition a y etre des fois que , et cree une nouvelle table en GPT pour voir ce que ca dis .
Dernière modification par iznobe (Le 27/11/2021, à 21:26)
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#23 Le 27/11/2021, à 21:30
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
bon après 6 tentative de création d'une partition sur le disque de 60 go... impossible
J'ai toujours le message
Error creating partition on /dev/sdg: Device '/dev/sdg'invalid or not existing (Error opening /dev/sdg: No such device or adress) ( udisks-error-quark, 0)
Ensuite il disparaît et je suis obligé de le débrancher puis le rebrancher pour le revoir...
Je pense qu'il est mort et qu'il va finir au magasin 17
Sachant que GSmartControl ne me donne rien sur ce disque alors que j'ai profusion d'info sur le 500go
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne
#24 Le 27/11/2021, à 21:38
- iznobe
Re : ata2.00: failed to set xfermode (err_mask=0x40)
donne ces 2 commandes :
sudo apt-get install --no-install-recommends smartmontools
sudo smartctl -s on -a /dev/sdg
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#25 Le 27/11/2021, à 21:39
- hibiki.tokay
Re : ata2.00: failed to set xfermode (err_mask=0x40)
punaise la 7eme tentatives a fonctionné.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-162-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LDLC
Serial Number: 10102217E0237
LU WWN Device Id: 0 000000 000000000
Firmware Version: P0831A
User Capacity: 60,022,480,896 bytes [60.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Sat Nov 27 20:38:34 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Disabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 050 - 0
5 Reallocated_Sector_Ct -O---- 100 100 050 - 5
9 Power_On_Hours ------ 100 100 050 - 156
12 Power_Cycle_Count ------ 100 100 050 - 490
160 Unknown_Attribute ------ 100 100 050 - 66
161 Unknown_Attribute ------ 100 100 050 - 103
162 Unknown_Attribute ------ 100 100 050 - 1
163 Unknown_Attribute ------ 100 100 050 - 37
164 Unknown_Attribute ------ 100 100 050 - 58707
165 Unknown_Attribute ------ 100 100 050 - 36
166 Unknown_Attribute ------ 100 100 050 - 2
167 Unknown_Attribute ------ 100 100 050 - 26
168 Unknown_Attribute ------ 100 100 050 - 3000
169 Unknown_Attribute ------ 100 100 050 - 100
192 Power-Off_Retract_Count ------ 100 100 050 - 55
194 Temperature_Celsius ------ 100 100 050 - 40
195 Hardware_ECC_Recovered ------ 100 100 050 - 8190
196 Reallocated_Event_Count ------ 100 100 050 - 0
241 Total_LBAs_Written ------ 100 100 050 - 38484
242 Total_LBAs_Read ------ 100 100 050 - 70896
245 Unknown_Attribute ------ 100 100 050 - 48048
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
Read GP Log Directory failed
SMART Log Directory Version 16436
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 80 Summary SMART error log
0x02 SL R/O 52 Comprehensive SMART error log
0x03 SL R/O 80 Ext. Comprehensive SMART error log
0x04 SL R/O 52 Device Statistics log
0x05 SL R/O 80 Reserved for CFA
0x06 SL R/O 52 SMART self-test log
0x07 SL R/O 80 Extended self-test log
0x08 SL R/O 52 Power Conditions log
0x09 SL R/W 80 Selective self-test log
0x0a SL R/W 52 Device Statistics Notification
0x0b SL - 80 Reserved for CFA
0x0c SL R/O 52 Pending Defects log
0x0d SL R/O 80 LPS Mis-alignment log
0x0e SL - 52 Reserved
0x0f SL R/O 80 Sense Data for Successful NCQ Cmds log
0x10 SL R/O 52 SATA NCQ Queued Error log
0x11 SL R/O 80 SATA Phy Event Counters log
0x12 SL R/O 52 SATA NCQ NON-DATA log
0x13 SL R/O 80 SATA NCQ Send and Receive log
0x14 SL R/O 52 SATA Hybrid Information log
0x15 SL R/W 80 SATA Rebuild Assist log
0x16 SL - 52 Reserved for Serial ATA
0x17 SL - 80 Reserved for Serial ATA
0x18 SL - 52 Reserved
0x19 SL R/O 80 LBA Status log
0x1a SL - 52 Reserved
0x1b SL - 80 Reserved
0x1c SL - 52 Reserved
0x1d SL - 80 Reserved
0x1e SL - 52 Reserved
0x1f SL - 80 Reserved
0x20 SL R/O 52 Streaming performance log [OBS-8]
0x21 SL R/O 80 Write stream error log
0x22 SL R/O 52 Read stream error log
0x23 SL R/O 80 Delayed sector log [OBS-8]
0x24 SL R/O 52 Current Device Internal Status Data log
0x25 SL R/O 80 Saved Device Internal Status Data log
0x26 SL - 52 Reserved
0x27 SL - 80 Reserved
0x28 SL - 52 Reserved
0x29 SL - 80 Reserved
0x2a SL - 52 Reserved
0x2b SL - 80 Reserved
0x2c SL - 52 Reserved
0x2d SL - 80 Reserved
0x2e SL - 52 Reserved
0x2f SL - 80 Reserved
0x30 SL R/O 52 IDENTIFY DEVICE data log
0x31 SL - 80 Reserved
0x32 SL - 52 Reserved
0x33 SL - 80 Reserved
0x34 SL - 52 Reserved
0x35 SL - 80 Reserved
0x36 SL - 52 Reserved
0x37 SL - 80 Reserved
0x38 SL - 52 Reserved
0x39 SL - 80 Reserved
0x3a SL - 52 Reserved
0x3b SL - 80 Reserved
0x3c SL - 52 Reserved
0x3d SL - 80 Reserved
0x3e SL - 52 Reserved
0x3f SL - 80 Reserved
0x40 SL - 52 Reserved
0x41 SL - 80 Reserved
0x42 SL - 52 Reserved
0x43 SL - 80 Reserved
0x44 SL - 52 Reserved
0x45 SL - 80 Reserved
0x46 SL - 52 Reserved
0x47 SL - 80 Reserved
0x48 SL - 52 Reserved
0x49 SL - 80 Reserved
0x4a SL - 52 Reserved
0x4b SL - 80 Reserved
0x4c SL - 52 Reserved
0x4d SL - 80 Reserved
0x4e SL - 52 Reserved
0x4f SL - 80 Reserved
0x50 SL - 52 Reserved
0x51 SL - 80 Reserved
0x52 SL - 52 Reserved
0x53 SL - 80 Reserved
0x54 SL - 52 Reserved
0x55 SL - 80 Reserved
0x56 SL - 52 Reserved
0x57 SL - 80 Reserved
0x58 SL - 52 Reserved
0x59 SL - 80 Reserved
0x5a SL - 52 Reserved
0x5b SL - 80 Reserved
0x5c SL - 52 Reserved
0x5d SL - 80 Reserved
0x5e SL - 52 Reserved
0x5f SL - 80 Reserved
0x60 SL - 52 Reserved
0x61 SL - 80 Reserved
0x62 SL - 52 Reserved
0x63 SL - 80 Reserved
0x64 SL - 52 Reserved
0x65 SL - 80 Reserved
0x66 SL - 52 Reserved
0x67 SL - 80 Reserved
0x68 SL - 52 Reserved
0x69 SL - 80 Reserved
0x6a SL - 52 Reserved
0x6b SL - 80 Reserved
0x6c SL - 52 Reserved
0x6d SL - 80 Reserved
0x6e SL - 52 Reserved
0x6f SL - 80 Reserved
0x70 SL - 52 Reserved
0x71 SL - 80 Reserved
0x72 SL - 52 Reserved
0x73 SL - 80 Reserved
0x74 SL - 52 Reserved
0x75 SL - 80 Reserved
0x76 SL - 52 Reserved
0x77 SL - 80 Reserved
0x78 SL - 52 Reserved
0x79 SL - 80 Reserved
0x7a SL - 52 Reserved
0x7b SL - 80 Reserved
0x7c SL - 52 Reserved
0x7d SL - 80 Reserved
0x7e SL - 52 Reserved
0x7f SL - 80 Reserved
0x80 SL R/W 52 Host vendor specific log
0x81 SL R/W 80 Host vendor specific log
0x82 SL R/W 52 Host vendor specific log
0x83 SL R/W 80 Host vendor specific log
0x84 SL R/W 52 Host vendor specific log
0x85 SL R/W 80 Host vendor specific log
0x86 SL R/W 52 Host vendor specific log
0x87 SL R/W 80 Host vendor specific log
0x88 SL R/W 52 Host vendor specific log
0x89 SL R/W 80 Host vendor specific log
0x8a SL R/W 52 Host vendor specific log
0x8b SL R/W 80 Host vendor specific log
0x8c SL R/W 52 Host vendor specific log
0x8d SL R/W 80 Host vendor specific log
0x8e SL R/W 52 Host vendor specific log
0x8f SL R/W 80 Host vendor specific log
0x90 SL R/W 52 Host vendor specific log
0x91 SL R/W 80 Host vendor specific log
0x92 SL R/W 52 Host vendor specific log
0x93 SL R/W 80 Host vendor specific log
0x94 SL R/W 52 Host vendor specific log
0x95 SL R/W 80 Host vendor specific log
0x96 SL R/W 52 Host vendor specific log
0x97 SL R/W 80 Host vendor specific log
0x98 SL R/W 52 Host vendor specific log
0x99 SL R/W 80 Host vendor specific log
0x9a SL R/W 52 Host vendor specific log
0x9b SL R/W 80 Host vendor specific log
0x9c SL R/W 52 Host vendor specific log
0x9d SL R/W 80 Host vendor specific log
0x9e SL R/W 52 Host vendor specific log
0x9f SL R/W 80 Host vendor specific log
0xa0 SL VS 52 Device vendor specific log
0xa1 SL VS 80 Device vendor specific log
0xa2 SL VS 52 Device vendor specific log
0xa3 SL VS 80 Device vendor specific log
0xa4 SL VS 52 Device vendor specific log
0xa5 SL VS 80 Device vendor specific log
0xa6 SL VS 52 Device vendor specific log
0xa7 SL VS 80 Device vendor specific log
0xa8 SL VS 52 Device vendor specific log
0xa9 SL VS 80 Device vendor specific log
0xaa SL VS 52 Device vendor specific log
0xab SL VS 80 Device vendor specific log
0xac SL VS 52 Device vendor specific log
0xad SL VS 80 Device vendor specific log
0xae SL VS 52 Device vendor specific log
0xaf SL VS 80 Device vendor specific log
0xb0 SL VS 52 Device vendor specific log
0xb1 SL VS 80 Device vendor specific log
0xb2 SL VS 52 Device vendor specific log
0xb3 SL VS 80 Device vendor specific log
0xb4 SL VS 52 Device vendor specific log
0xb5 SL VS 80 Device vendor specific log
0xb6 SL VS 52 Device vendor specific log
0xb7 SL VS 80 Device vendor specific log
0xb8 SL VS 52 Device vendor specific log
0xb9 SL VS 80 Device vendor specific log
0xba SL VS 52 Device vendor specific log
0xbb SL VS 80 Device vendor specific log
0xbc SL VS 52 Device vendor specific log
0xbd SL VS 80 Device vendor specific log
0xbe SL VS 52 Device vendor specific log
0xbf SL VS 80 Device vendor specific log
0xc0 SL VS 52 Device vendor specific log
0xc1 SL VS 80 Device vendor specific log
0xc2 SL VS 52 Device vendor specific log
0xc3 SL VS 80 Device vendor specific log
0xc4 SL VS 52 Device vendor specific log
0xc5 SL VS 80 Device vendor specific log
0xc6 SL VS 52 Device vendor specific log
0xc7 SL VS 80 Device vendor specific log
0xc8 SL VS 52 Device vendor specific log
0xc9 SL VS 80 Device vendor specific log
0xca SL VS 52 Device vendor specific log
0xcb SL VS 80 Device vendor specific log
0xcc SL VS 52 Device vendor specific log
0xcd SL VS 80 Device vendor specific log
0xce SL VS 52 Device vendor specific log
0xcf SL VS 80 Device vendor specific log
0xd0 SL VS 52 Device vendor specific log
0xd1 SL VS 80 Device vendor specific log
0xd2 SL VS 52 Device vendor specific log
0xd3 SL VS 80 Device vendor specific log
0xd4 SL VS 52 Device vendor specific log
0xd5 SL VS 80 Device vendor specific log
0xd6 SL VS 52 Device vendor specific log
0xd7 SL VS 80 Device vendor specific log
0xd8 SL VS 52 Device vendor specific log
0xd9 SL VS 80 Device vendor specific log
0xda SL VS 52 Device vendor specific log
0xdb SL VS 80 Device vendor specific log
0xdc SL VS 52 Device vendor specific log
0xdd SL VS 80 Device vendor specific log
0xde SL VS 52 Device vendor specific log
0xdf SL VS 80 Device vendor specific log
0xe0 SL R/W 52 SCT Command/Status
0xe1 SL R/W 80 SCT Data Transfer
0xe2 SL - 52 Reserved
0xe3 SL - 80 Reserved
0xe4 SL - 52 Reserved
0xe5 SL - 80 Reserved
0xe6 SL - 52 Reserved
0xe7 SL - 80 Reserved
0xe8 SL - 52 Reserved
0xe9 SL - 80 Reserved
0xea SL - 52 Reserved
0xeb SL - 80 Reserved
0xec SL - 52 Reserved
0xed SL - 80 Reserved
0xee SL - 52 Reserved
0xef SL - 80 Reserved
0xf0 SL - 52 Reserved
0xf1 SL - 80 Reserved
0xf2 SL - 52 Reserved
0xf3 SL - 80 Reserved
0xf4 SL - 52 Reserved
0xf5 SL - 80 Reserved
0xf6 SL - 52 Reserved
0xf7 SL - 80 Reserved
0xf8 SL - 52 Reserved
0xf9 SL - 80 Reserved
0xfa SL - 52 Reserved
0xfb SL - 80 Reserved
0xfc SL - 52 Reserved
0xfd SL - 80 Reserved
0xfe SL - 52 Reserved
0xff SL - 80 Reserved
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 52
Invalid Error Log index = 0x40 (T13/1321D rev 1c Section 8.41.6.8.2.2 gives valid range from 1 to 5)
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 16436
Warning: ATA Specification requires self-test log structure revision number = 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0x50) Completed without error 00% 16436 -
# 2 Vendor (0x50) Completed without error 00% 16436 -
# 3 Vendor (0x50) Completed without error 00% 16436 -
# 4 Vendor (0x50) Completed without error 00% 16436 -
# 5 Vendor (0x50) Completed without error 00% 16436 -
# 6 Vendor (0x50) Completed without error 00% 16436 -
# 7 Vendor (0x50) Completed without error 00% 16436 -
# 8 Vendor (0x50) Completed without error 00% 16436 -
# 9 Vendor (0x50) Completed without error 00% 16436 -
#10 Vendor (0x50) Completed without error 00% 16436 -
#11 Vendor (0x50) Completed without error 00% 16436 -
#12 Vendor (0x50) Completed without error 00% 16436 -
#13 Vendor (0x50) Completed without error 00% 16436 -
#14 Vendor (0x50) Completed without error 00% 16436 -
#15 Vendor (0x50) Completed without error 00% 16436 -
#16 Vendor (0x50) Completed without error 00% 16436 -
#17 Vendor (0x50) Completed without error 00% 16436 -
#18 Vendor (0x50) Completed without error 00% 16436 -
#19 Vendor (0x50) Completed without error 00% 16436 -
#20 Vendor (0x50) Completed without error 00% 16436 -
#21 Vendor (0x50) Completed without error 00% 16436 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics page 0x00 is invalid (page=0x50, nentries=52)
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
Read SATA Phy Event Counters failed
Cooler Master MasterBox Q300L, ASRock B550M Steel Legend, AMD Ryzen 5 5600 , GTX 1050 Ti WINDFORCE, DDR4 32go (Ub22.10)
Portable Lenovo Ideapad Gaming 3 15IHU6 ram32Go, Mvne 2To + 4To + SSD 8To (Ub22.10)
Syno DS1819+ 8x6To (SHR2) et Syno DS1512+ 5x8To (SHR1)
Hors ligne