#1 Le 06/12/2021, à 15:12
- Henri56
cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Bonjour , comme écrit dans le titre , j’attends un ssd et j'aimerais cloner mon système .
J'ai ubuntu et win10 sur des hdd séparé , je trouve des indication pour cloner des dual boot sur un hdd vers ssd mais pas avec des hdd séparé . si quelqu’un a des conseils a me donner je suis preneur avant de faire des bétises .
a+ Henri
Dernière modification par Henri56 (Le 15/12/2021, à 18:19)
Hors ligne
#2 Le 06/12/2021, à 15:26
- malbo
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Bonjour,
Les deux HDD étant présents, je te prie de faire un Boot-info depuis une session de ton Ubuntu installé puis de donner l'URL de ce Boot-info dans ta réponse. Le but, c'est de vérifier que le mode de démarrage de Ubuntu et de Win10 est compatible de ce projet.
Hors ligne
#3 Le 06/12/2021, à 15:49
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
je pense que ca doit etre ceci : http://paste.ubuntu.com/p/mK7xgpWKJn/
Hors ligne
#4 Le 06/12/2021, à 16:52
- Qid
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
bah de toutes façons de mon point de vu la stratégie reste la même que si les 2 étaient sur le même disque dur au départ :
le seul élément important étant que l'espace occupé (pas forcément la taille des partitions) par chacun des systèmes soit bien plus petite que la capacité totale du nouveau disque dur... après il y a plusieurs solution dont entre autre la plus facile : la copie de partition via gparted... la commande dd peut aussi être une autre solution
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#5 Le 06/12/2021, à 17:12
- iznobe
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Bonjour , collage du boot-info :
boot-info-4ppa130 [20211206_1444]
============================== Boot Info Summary ===============================
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda1
and looks at sector 191646792 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grldr /bootmgr /Boot/BCD /grldr
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 10
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdb3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
================================ 3 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 18.04.6 LTS CurrentSession on sda1
OS#2: Windows 10 (boot) on sdb1
OS#3: Windows Vista on sdb2
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-4.15.0-163-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro quiet splash vt.handoff=1
===================================== UEFI =====================================
This installed-session is not in EFI-mode.
EFI in dmesg.
[ 0.000000] ACPI: UEFI 0x00000000DE7DE910 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: Reserving UEFI table memory at [mem 0xde7de910-0xde7de951]
f60ef57cf88e1056bdcce96c3ff0a263 sda2/boot/bootx64.efi
44ff4355005a915aef403a3fe10cbef5 sda2/boot/grubx64.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
sda2 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb1 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sdb2 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdb3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
sda1 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdb1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot
sdb2 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot
sdb3 : isnotESP, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda2 : maybesepboot, no-kernel, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda3 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sdb1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdb2 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
sdb3 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdb
fdisk -l (filtered): ___________________________________________________________
Disk sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x000e5446
Boot Start End Sectors Size Id Type
sda1 * 2048 308662204 308660157 147.2G 83 Linux
sda2 308662272 718262271 409600000 195.3G 83 Linux
sda3 718262272 976773119 258510848 123.3G 7 HPFS/NTFS/exFAT
Disk sdb: 149.1 GiB, 160041885696 bytes, 312581808 sectors
Disk identifier: 0xa01c3b0c
Boot Start End Sectors Size Id Type
sdb1 * 2048 206847 204800 100M 7 HPFS/NTFS/exFAT
sdb2 206848 311433188 311226341 148.4G 7 HPFS/NTFS/exFAT
sdb3 311433216 312578047 1144832 559M 27 Hidden NTFS WinRE
parted -lm (filtered): _________________________________________________________
sda:500GB:scsi:512:4096:msdos:ATA TOSHIBA DT01ACA0:;
1:1049kB:158GB:158GB:ext4::boot;
2:158GB:368GB:210GB:ext4::;
3:368GB:500GB:132GB:ntfs::;
sdb:160GB:scsi:512:512:msdos:ATA STM3160318AS:;
1:1049kB:106MB:105MB:ntfs::boot;
2:106MB:159GB:159GB:ntfs::;
3:159GB:160GB:586MB:ntfs::diag;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 ext4 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 000e5446-01
├─sda2 ext4 d2689a15-377f-4ede-bb3e-eb635db42583 000e5446-02
└─sda3 ntfs 3E6406A50CD98978 000e5446-03
sdb
├─sdb1 ntfs 5EC017DEC017BAEB a01c3b0c-01 Réservé au système
├─sdb2 ntfs 7C2688232687DD10 a01c3b0c-02
└─sdb3 ntfs 1EC414E0C414BBC9 a01c3b0c-03
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 31.4G 73% /
sda2 29.4G 80% /mnt/boot-sav/sda2
sda3 46.4G 62% /mnt/boot-sav/sda3
sdb1 67.4M 33% /mnt/boot-sav/sdb1
sdb2 33.2G 78% /mnt/boot-sav/sdb2
sdb3 108M 81% /mnt/boot-sav/sdb3
Mount options: __________________________________________________________________
sda1 rw,relatime,errors=remount-ro,stripe=32738,data=ordered
sda2 rw,relatime,data=ordered
sda3 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb1 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb2 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb3 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
====================== sda1/boot/grub/grub.cfg (filtered) ======================
Ubuntu d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, avec Linux 4.15.0-163-generic d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Ubuntu, avec Linux 4.15.0-162-generic d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
Windows 10 (sur sdb1) 5EC017DEC017BAEB
Windows Vista (sur sdb2) 7C2688232687DD10
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sda1/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 / ext4 errors=remount-ro 0 1
======================= sda1/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
42.209617615 = 45.322231808 boot/grub/grub.cfg 1
91.384334564 = 98.123182080 boot/grub/i386-pc/core.img 1
112.172908783 = 120.444743680 boot/vmlinuz-4.15.0-162-generic 2
44.477600098 = 47.757459456 boot/vmlinuz-4.15.0-163-generic 1
44.477600098 = 47.757459456 vmlinuz 1
112.172908783 = 120.444743680 vmlinuz.old 2
138.875972748 = 149.116940288 boot/initrd.img-4.15.0-162-generic 5
46.071052551 = 49.468416000 boot/initrd.img-4.15.0-163-generic 5
46.071052551 = 49.468416000 initrd.img 5
138.875972748 = 149.116940288 initrd.img.old 5
===================== sda1: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 12808 aoû 24 2020 10_linux
-rwxr-xr-x 1 root root 11298 aoû 24 2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 aoû 24 2020 30_os-prober
-rwxr-xr-x 1 root root 1418 jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 jun 17 2016 41_custom
====================== sda2/boot/grub/grub.cfg (filtered) ======================
==================== sda2/syslinux/syslinux.cfg (filtered) =====================
# Created by generate-pxe-menu! Do NOT edit unless you know what you are doing!
# Keep those comment "MENU DEFAULT" and "MENU HIDE"! Do NOT remove them.
# Note!!! If "serial" directive exists, it must be the first directive
default /syslinux/menu.c32
timeout 300
prompt 0
noescape 1
MENU MARGIN 5
MENU BACKGROUND ocswp.png
# Set the color for unselected menu item and timout message
MENU COLOR UNSEL 7;32;41 #c0000090 #00000000
MENU COLOR TIMEOUT_MSG 7;32;41 #c0000090 #00000000
MENU COLOR TIMEOUT 7;32;41 #c0000090 #00000000
MENU COLOR HELP 7;32;41 #c0000090 #00000000
# MENU MASTER PASSWD
say **********************************************************************
say Clonezilla, the OpenSource Clone System.
say NCHC Free Software Labs, Taiwan.
say clonezilla.org, clonezilla.nchc.org.tw
say THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
say **********************************************************************
# Allow client to edit the parameters
ALLOWOPTIONS 1
# simple menu title
MENU TITLE clonezilla.org, clonezilla.nchc.org.tw
# Since no network setting in the squashfs image, therefore if ip=, the network is disabled. That's what we want.
label Clonezilla live
MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 800x600)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=788 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
* Boot menu for BIOS machine
* Clonezilla live version: 20141125-utopic-amd64. (C) 2003-2014, NCHC, Taiwan
* Disclaimer: Clonezilla comes with ABSOLUTELY NO WARRANTY
ENDTEXT
MENU BEGIN Other modes of Clonezilla live
label Clonezilla live 1024x768
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 1024x768)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=791 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
VGA mode 1024x768. OK for most of VGA cards.
ENDTEXT
label Clonezilla live 640x480
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 640x480)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=785 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
VGA mode 640x480. OK for most of VGA cards.
ENDTEXT
label Clonezilla live KMS
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, KMS)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=791 ip= splash
TEXT HELP
KMS mode. OK for ATI, Intel and NVIDIA VGA cards.
ENDTEXT
label Clonezilla live (To RAM)
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (To RAM. Boot media can be removed later)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=788 toram=filesystem.squashfs ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
All the programs will be copied to RAM, so you can
remove boot media (CD or USB flash drive) later
ENDTEXT
label Clonezilla live without framebuffer
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Safe graphic settings, vga=normal)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no ip= nomodeset vga=normal nosplash
TEXT HELP
Disable console frame buffer support
ENDTEXT
label Clonezilla live failsafe mode
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Failsafe mode)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no acpi=off irqpoll noapic noapm nodma nomce nolapic nosmp ip= nomodeset vga=normal nosplash
TEXT HELP
acpi=off irqpoll noapic noapm nodma nomce nolapic
nosmp nomodeset vga=normal nosplash
ENDTEXT
MENU END
label local
# MENU DEFAULT
# MENU HIDE
MENU LABEL Local operating system in harddrive (if available)
# MENU PASSWD
# 2 method to boot local device:
# (1) For localboot 0, it is decided by boot order in BIOS, so uncomment the follow 1 line if you want this method:
# localboot 0
# (2) For chain.c32, you can assign the boot device.
# Ref: extlinux.doc from syslinux
# Syntax: APPEND [hd|fd]<number> [<partition>]
# [<partition>] is optional.
# Ex:
# Second partition (2) on the first hard disk (hd0);
# Linux would *typically* call this /dev/hda2 or /dev/sda2, then it's "APPEND hd0 2"
#
kernel chain.c32
append hd0
TEXT HELP
Boot local OS from first hard disk if it's available
ENDTEXT
MENU BEGIN Memtest & FreeDOS
# Note! *.bin is specially purpose for syslinux,
# Do NOT use memtest.bin, use memtest instead of memtest.bin
label memtest
# MENU DEFAULT
# MENU HIDE
MENU LABEL Memory test using Memtest86+
# MENU PASSWD
kernel /live/memtest
TEXT HELP
Run memory test using Memtest86+
ENDTEXT
label FreeDOS
# MENU DEFAULT
# MENU HIDE
MENU LABEL FreeDOS
# MENU PASSWD
kernel memdisk
append initrd=/live/freedos.img
TEXT HELP
Run FreeDOS
ENDTEXT
MENU END
label iPXE
# MENU DEFAULT
# MENU HIDE
MENU LABEL Network boot via iPXE
# MENU PASSWD
kernel /live/ipxe.lkn
TEXT HELP
Run iPXE to enable network (PXE) boot
ENDTEXT
MENU END
==================== sda2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
215.306640625 = 231.183745024 boot/grub/grub.cfg 1
================== sda2: Location of files loaded by Syslinux ==================
GiB - GB File Fragment(s)
323.521907806 = 347.379003392 syslinux/syslinux.cfg 1
323.470577240 = 347.323887616 syslinux/chain.c32 1
323.521595001 = 347.378667520 syslinux/ldlinux.c32 1
323.521770477 = 347.378855936 syslinux/libcom32.c32 1
323.470699310 = 347.324018688 syslinux/libutil.c32 1
323.521850586 = 347.378941952 syslinux/menu.c32 1
323.521934509 = 347.379032064 syslinux/vesamenu.c32 1
=============== sda2: Version of COM32(R) files used by Syslinux ===============
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/menu.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : not a COM32/COM32R module
========= Devices which don't seem to have a corresponding hard drive ==========
sdc
================================= User choice ==================================
Is sda (ATA TOSHIBA DT01ACA0) a removable disk? no
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub2 of
sda1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your BIOS boot on sda (ATA TOSHIBA DT01ACA0) disk!retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#6 Le 06/12/2021, à 18:33
- malbo
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Win10 et Ubuntu sont installés tous les deux en mode Bios classique. C'est sûrement une condition importante pour ce projet. Par contre, je ne sais pas comment il faut procéder mais j'imagine qu'il faut s'occuper d'abord de cloner Win10 sur le SSD.
Hors ligne
#7 Le 06/12/2021, à 18:46
- Qid
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
malbo a écrit :
j'imagine qu'il faut s'occuper d'abord de cloner Win10 sur le SSD.
ce serait le plus logique si on considère que Windows devrait toujours être en tête de disque oui...
après pour les méthodes j'ai donné 2 approches volontairement sans aucun détail pour attendre validation d'un plus expérimenté
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#8 Le 07/12/2021, à 00:04
- geole
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Bonsoir.
Le boot étant legacy. il ne faudra pas oublier de copier les 446 premiers caractéres du disque et copier par la commande dd la partition ubuntu afin que la seconde partie de la structure de boot ne soit pas oubliée car elle est hors structure de fichier.
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda1
and looks at sector 191646792 of the same hard drive Il est probablement plus pratique de lancer boot-repair et de refabriquer une structure de boot après avoir dupliqué par gparted.
Les partitions qui me semblent devoir être dupliquées.
sda:500GB:scsi:512:4096:msdos:ATA TOSHIBA DT01ACA0:;
1:1049kB:158GB:158GB:ext4::boot;
2:158GB:368GB:210GB:ext4::;
sdb:160GB:scsi:512:512:msdos:ATA STM3160318AS:;
1:1049kB:106MB:105MB:ntfs::boot;
2:106MB:159GB:159GB:ntfs::;Mais, je ne suis pas certain que dupliquer sdb1 soit obligatoire.
Je n'ai pas compris le contenu de SDA2 non détecté comme O.S. et ayant des fichiers d'O.S..
Dernière modification par geole (Le 07/12/2021, à 00:38)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#9 Le 07/12/2021, à 07:39
- Qid
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
geole a écrit :
Il est probablement plus pratique de lancer boot-repair et de refabriquer une structure de boot après avoir dupliqué par gparted.
Merci d'être intervenu... J'avoue que je comptais un peu sur toi pour m'appuyer... En tous cas oui il est évident que quelquesoit la méthode choisi il faudra après avoir enlevé les 2 disques de départ pour éviter les interférences régénérer le boot soit via bootrepair soit par un simple grub-install bien configuré
edit pour complément de réponse :
geole a écrit :
Mais, je ne suis pas certain que dupliquer sdb1 soit obligatoire.
Je n'ai pas compris le contenu de SDA2 non détecté comme O.S. et ayant des fichiers d'O.S..
En fait le mieux serait de déplacer la totalité des partitions pour ne pas se prendre la tête...
Perso j'ai déjà joué à fusionner 2 disques durs en un seul mais ce n'était que pour des données : j'avais fait ça avec rsync/grsync
Dernière modification par Qid (Le 07/12/2021, à 07:45)
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#10 Le 14/12/2021, à 18:44
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
je reviens vers vous , j'ai essayer de trouver des solutions par moi-même mais je n'y arrive pas donc je vous résume ce qui ne va pas .
j'ai copier la partition sda1 (Ubuntu) sur lune partition du ssd , pas de problème mais quand j'essaye de changer l'UUID impossible , gparted refuse meme en live .
autre chose , si je choisi le ssd au démarrage , il boot quand même sur sda1 .
encore plus bizarre , si je débranche sda1 le pc ne démarre pas du tout , pas de ventilo , rien , même s'il ne trouve pas de os le pc devrait démarrer et avoir accès au bios non ?
j'ai aussi essayé de changer le boot avec boot repair , il me dit qu'il ne sait pas le faire ou quelque chose d'équivalent
Si une bonne âme peut me dire comment faire pas a pas ce serait sympa
A+ Henri
Hors ligne
#11 Le 14/12/2021, à 19:00
- geole
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Bonjour
j'essaye de changer l'UUID impossible , gparted refuse meme en live .
Il faudrait que tu donnes la raison de l'erreur en te servant de enregistrer les détails puis sauver le fichier et l'ouvrir pour regarder ce qu'il contient
sinon, en ligne de commande, après avoir bien identifié la partition du SSD
sudo umount /dev/sdXN
sudo tune2fs -U random /dev/sdXNTu auras l'erreur en direct.
je choisi le ssd au démarrage , il boot quand même sur sda1
Lorsque deux partitions ont le même UUID, il en choisi une avec une règle que je connais mal.
si je débranche sda1 le pc ne démarre pas du tout , pas de ventilo
Il y a des chances qu'il faille régler quelque chose dans le bios, Certainement mettre le SSD dans la liste des périphériques qui sont aptes à booter
j'ai aussi essayé de changer le boot avec boot repair , il me dit qu'il ne sait pas le faire ou quelque chose d'équivalent
Tu aurais du poster son compte-rendu. Mais on ne répare pas sans avoir d'abord diagnostiqué avec boot-info et demandé l'avis de la communauté. https://doc.ubuntu-fr.org/tutoriel/boot-info
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#12 Le 14/12/2021, à 20:07
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
c'est pas gagné , les détails sont dans le fichier admin:///root/Desktop/gparted/gparted_details.htm je ne sais pas comment l'ouvrir .
boot info tourne depuis 15 minutes , je pense qu'il est bloqué qlq part
sudo unmount dev ... ne fonctionne pas non plus
Dernière modification par Henri56 (Le 14/12/2021, à 20:09)
Hors ligne
#13 Le 14/12/2021, à 20:34
- geole
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Tu ouvres firefox et tu lui colle ///root/Desktop/gparted/gparted_details.htm dans sa zone de recherche
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
En ligne
#14 Le 14/12/2021, à 20:36
- Qid
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Un fichier htm n'est que du texte interprétable par un navigateur web 
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#15 Le 14/12/2021, à 20:45
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
firefox dit que je n'ai pas les permissions nécessaire
Hors ligne
#16 Le 14/12/2021, à 20:59
- Qid
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Henri56 a écrit :
firefox dit que je n'ai pas les permissions nécessaire
Normal... Par contre je comprends pas pourquoi t'avais la réponse à ce souci que tu n'as pas su appliquer
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#17 Le 14/12/2021, à 21:04
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Normal... Par contre je comprends pas pourquoi t'avais la réponse à ce souci que tu n'as pas su appliquer ??? comprend pas bien la
Hors ligne
#18 Le 14/12/2021, à 21:16
- Qid
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
On recommence
Henri56 a écrit :
c'est pas gagné , les détails sont dans le fichier admin:///root/Desktop/gparted/gparted_details.htm je ne sais pas comment l'ouvrir .
Tu le sors d'où ce fichier ?
Bon cela dit j'ai des doutes sur la "règle" de "sécurité" à appliquer dans ces circonstances... J'aurais presque envie de te dire que le plus propre serait de changer les droits sur le fichier... Mais on va attendre qu'un autre aidant confirme
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#19 Le 14/12/2021, à 21:18
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
bon je verrais çà demain , je ferai un boot info avec bootrepair en live
a+
Hors ligne
#20 Le 15/12/2021, à 14:20
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
voici le lien boot info : https://pastebin.ubuntu.com/
Hors ligne
#21 Le 15/12/2021, à 14:21
- iznobe
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Bonjour , ton lien n' est pas valide .
retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#22 Le 15/12/2021, à 14:57
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
je m'en doutais , c'étais avec boot repair en live , sous ma session boot-info n'arrive pas a le faire
Hors ligne
#23 Le 15/12/2021, à 15:08
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
Bon merci mint j ai pu le faire grace a lui voici. https://paste.ubuntu.com/p/VFyvngktGq/
Hors ligne
#24 Le 15/12/2021, à 15:09
- iznobe
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
collage du boot-info :
Boot Info Script 71f6c5c + Boot-Repair extra info [Boot-Info 16mar2020]
============================= Boot Info Summary: ===============================
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sdb.
=> No known boot loader is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda1
and looks at sector 191646792 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
Operating System: Ubuntu 18.04.6 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /syslinux/syslinux.cfg
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grldr /bootmgr /Boot/BCD /grldr
sdb2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdb3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Operating System:
Boot files: /boot/grub/grub.cfg
sdc2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdc2 starts
at sector 0. But according to the info from fdisk,
sdc2 starts at sector 648. According to the info in
the boot sector, sdc2 has 0 sectors.
Operating System:
Boot files: /efi/boot/bootx64.efi /efi/boot/grubx64.efi
/efi/boot/mmx64.efi
sdc3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk model: TOSHIBA DT01ACA0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 308,662,204 308,660,157 83 Linux
/dev/sda2 308,662,272 718,262,271 409,600,000 83 Linux
/dev/sda3 718,262,272 976,773,119 258,510,848 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 149.5 GiB, 160041885696 bytes, 312581808 sectors
Disk model: STM3160318AS
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sdb2 206,848 311,433,188 311,226,341 7 NTFS / exFAT / HPFS
/dev/sdb3 311,433,216 312,578,047 1,144,832 27 Hidden NTFS (Recovery Environment)
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 7.51 GiB, 8053063680 bytes, 15728640 sectors
Disk model: Flash Disk
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 0 3,876,543 3,876,544 0 Empty
/dev/sdc2 648 8,583 7,936 ef EFI (FAT-12/16/32)
/dev/sdc3 3,878,912 15,728,639 11,849,728 83 Linux
/dev/sdc1 overlaps with /dev/sdc2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdc1 + R 0 3,876,487 3,876,488 Data partition (Windows/Linux)
/dev/sdc2 + R 648 8,583 7,936 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/nvme0n1p1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ext4
/dev/nvme0n1p2 720731E15319FF48 ntfs
/dev/nvme0n1p3 720731E15319FF48 ntfs
/dev/sda1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ext4
/dev/sda2 d2689a15-377f-4ede-bb3e-eb635db42583 ext4
/dev/sda3 3E6406A50CD98978 ntfs
/dev/sdb1 5EC017DEC017BAEB ntfs Réservé au système
/dev/sdb2 7C2688232687DD10 ntfs
/dev/sdb3 1EC414E0C414BBC9 ntfs
/dev/sdc1 2020-06-24-19-01-47-00 iso9660 Linux Mint 20 Cinnamon 64-bit
/dev/sdc2 1AC3-20ED vfat
/dev/sdc3
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 15 13:00 ata-ATAPI_iHAS124_E_3524703_2C8431511012 -> ../../sr0
lrwxrwxrwx 1 root root 9 Dec 15 13:04 ata-STM3160318AS_9VY4RDEN -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 15 13:04 ata-STM3160318AS_9VY4RDEN-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Dec 15 13:04 ata-STM3160318AS_9VY4RDEN-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Dec 15 13:04 ata-STM3160318AS_9VY4RDEN-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 9 Dec 15 13:04 ata-TOSHIBA_DT01ACA050_Z4SEV5XAS -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 15 13:04 ata-TOSHIBA_DT01ACA050_Z4SEV5XAS-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 15 13:04 ata-TOSHIBA_DT01ACA050_Z4SEV5XAS-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 15 13:04 ata-TOSHIBA_DT01ACA050_Z4SEV5XAS-part3 -> ../../sda3
lrwxrwxrwx 1 root root 13 Dec 15 13:04 nvme-WDC_WDS100T2B0C_21376P800074 -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Dec 15 13:04 nvme-WDC_WDS100T2B0C_21376P800074-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Dec 15 13:04 nvme-WDC_WDS100T2B0C_21376P800074-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Dec 15 13:04 nvme-WDC_WDS100T2B0C_21376P800074-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 13 Dec 15 13:04 nvme-eui.e8238fa6bf530001001b448b4106f82d -> ../../nvme0n1
lrwxrwxrwx 1 root root 15 Dec 15 13:04 nvme-eui.e8238fa6bf530001001b448b4106f82d-part1 -> ../../nvme0n1p1
lrwxrwxrwx 1 root root 15 Dec 15 13:04 nvme-eui.e8238fa6bf530001001b448b4106f82d-part2 -> ../../nvme0n1p2
lrwxrwxrwx 1 root root 15 Dec 15 13:04 nvme-eui.e8238fa6bf530001001b448b4106f82d-part3 -> ../../nvme0n1p3
lrwxrwxrwx 1 root root 9 Dec 15 13:00 usb-EPSON_Storage_583435543035313644-0:0 -> ../../sdd
lrwxrwxrwx 1 root root 9 Dec 15 13:04 usb-Generic_Flash_Disk_B29D99D4-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Dec 15 13:04 usb-Generic_Flash_Disk_B29D99D4-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Dec 15 13:04 usb-Generic_Flash_Disk_B29D99D4-0:0-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 10 Dec 15 13:04 usb-Generic_Flash_Disk_B29D99D4-0:0-part3 -> ../../sdc3
lrwxrwxrwx 1 root root 9 Dec 15 13:04 wwn-0x5000039fffc64b24 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 15 13:04 wwn-0x5000039fffc64b24-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec 15 13:04 wwn-0x5000039fffc64b24-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 15 13:04 wwn-0x5000039fffc64b24-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Dec 15 13:04 wwn-0x5000c5001a61dc54 -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 15 13:04 wwn-0x5000c5001a61dc54-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Dec 15 13:04 wwn-0x5000c5001a61dc54-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Dec 15 13:04 wwn-0x5000c5001a61dc54-part3 -> ../../sdb3
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_BE
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
linux /boot/vmlinuz-4.15.0-163-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-163-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
menuentry 'Ubuntu, avec Linux 4.15.0-163-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-163-generic-advanced-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
echo 'Chargement de Linux 4.15.0-163-generic…'
linux /boot/vmlinuz-4.15.0-163-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-163-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-163-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-163-generic-recovery-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
echo 'Chargement de Linux 4.15.0-163-generic…'
linux /boot/vmlinuz-4.15.0-163-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro recovery nomodeset dis_ucode_ldr
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-163-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-162-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-162-generic-advanced-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
echo 'Chargement de Linux 4.15.0-162-generic…'
linux /boot/vmlinuz-4.15.0-162-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-162-generic
}
menuentry 'Ubuntu, avec Linux 4.15.0-162-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-162-generic-recovery-d4b24ad1-82ac-401e-82a2-9843bcdfd9d6' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
echo 'Chargement de Linux 4.15.0-162-generic…'
linux /boot/vmlinuz-4.15.0-162-generic root=UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 ro recovery nomodeset dis_ucode_ldr
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-162-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
else
search --no-floppy --fs-uuid --set=root d4b24ad1-82ac-401e-82a2-9843bcdfd9d6
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 10 (sur /dev/sdb1)' --class windows --class os $menuentry_id_option 'osprober-chain-5EC017DEC017BAEB' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 5EC017DEC017BAEB
else
search --no-floppy --fs-uuid --set=root 5EC017DEC017BAEB
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows Vista (sur /dev/sdb2)' --class windows --class os $menuentry_id_option 'osprober-chain-7C2688232687DD10' {
insmod part_msdos
insmod ntfs
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 7C2688232687DD10
else
search --no-floppy --fs-uuid --set=root 7C2688232687DD10
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=d4b24ad1-82ac-401e-82a2-9843bcdfd9d6 / ext4 errors=remount-ro 0 1
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
42.126564026 = 45.233053696 boot/grub/grub.cfg 1
91.384334564 = 98.123182080 boot/grub/i386-pc/core.img 1
112.172908783 = 120.444743680 boot/vmlinuz-4.15.0-162-generic 2
44.477600098 = 47.757459456 boot/vmlinuz-4.15.0-163-generic 1
44.477600098 = 47.757459456 vmlinuz 1
112.172908783 = 120.444743680 vmlinuz.old 2
138.875972748 = 149.116940288 boot/initrd.img-4.15.0-162-generic 5
102.563392639 = 110.126604288 boot/initrd.img-4.15.0-163-generic 5
102.563392639 = 110.126604288 initrd.img 5
138.875972748 = 149.116940288 initrd.img.old 5
========================= sda2/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# Created by generate-pxe-menu! Do NOT edit unless you know what you are doing!
# Keep those comment "MENU DEFAULT" and "MENU HIDE"! Do NOT remove them.
# Note!!! If "serial" directive exists, it must be the first directive
default /syslinux/menu.c32
timeout 300
prompt 0
noescape 1
MENU MARGIN 5
MENU BACKGROUND ocswp.png
# Set the color for unselected menu item and timout message
MENU COLOR UNSEL 7;32;41 #c0000090 #00000000
MENU COLOR TIMEOUT_MSG 7;32;41 #c0000090 #00000000
MENU COLOR TIMEOUT 7;32;41 #c0000090 #00000000
MENU COLOR HELP 7;32;41 #c0000090 #00000000
# MENU MASTER PASSWD
say **********************************************************************
say Clonezilla, the OpenSource Clone System.
say NCHC Free Software Labs, Taiwan.
say clonezilla.org, clonezilla.nchc.org.tw
say THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
say **********************************************************************
# Allow client to edit the parameters
ALLOWOPTIONS 1
# simple menu title
MENU TITLE clonezilla.org, clonezilla.nchc.org.tw
# Since no network setting in the squashfs image, therefore if ip=, the network is disabled. That's what we want.
label Clonezilla live
MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 800x600)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=788 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
* Boot menu for BIOS machine
* Clonezilla live version: 20141125-utopic-amd64. (C) 2003-2014, NCHC, Taiwan
* Disclaimer: Clonezilla comes with ABSOLUTELY NO WARRANTY
ENDTEXT
MENU BEGIN Other modes of Clonezilla live
label Clonezilla live 1024x768
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 1024x768)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=791 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
VGA mode 1024x768. OK for most of VGA cards.
ENDTEXT
label Clonezilla live 640x480
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, VGA 640x480)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=785 ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
VGA mode 640x480. OK for most of VGA cards.
ENDTEXT
label Clonezilla live KMS
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Default settings, KMS)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=791 ip= splash
TEXT HELP
KMS mode. OK for ATI, Intel and NVIDIA VGA cards.
ENDTEXT
label Clonezilla live (To RAM)
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (To RAM. Boot media can be removed later)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=788 toram=filesystem.squashfs ip= splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1
TEXT HELP
All the programs will be copied to RAM, so you can
remove boot media (CD or USB flash drive) later
ENDTEXT
label Clonezilla live without framebuffer
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Safe graphic settings, vga=normal)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no ip= nomodeset vga=normal nosplash
TEXT HELP
Disable console frame buffer support
ENDTEXT
label Clonezilla live failsafe mode
# MENU DEFAULT
# MENU HIDE
MENU LABEL Clonezilla live (Failsafe mode)
# MENU PASSWD
kernel /live/vmlinuz
append initrd=/live/initrd.img boot=live username=user hostname=utopic config quiet union=overlayfs noswap edd=on nomodeset nodmraid noeject locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no acpi=off irqpoll noapic noapm nodma nomce nolapic nosmp ip= nomodeset vga=normal nosplash
TEXT HELP
acpi=off irqpoll noapic noapm nodma nomce nolapic
nosmp nomodeset vga=normal nosplash
ENDTEXT
MENU END
label local
# MENU DEFAULT
# MENU HIDE
MENU LABEL Local operating system in harddrive (if available)
# MENU PASSWD
# 2 method to boot local device:
# (1) For localboot 0, it is decided by boot order in BIOS, so uncomment the follow 1 line if you want this method:
# localboot 0
# (2) For chain.c32, you can assign the boot device.
# Ref: extlinux.doc from syslinux
# Syntax: APPEND [hd|fd]<number> [<partition>]
# [<partition>] is optional.
# Ex:
# Second partition (2) on the first hard disk (hd0);
# Linux would *typically* call this /dev/hda2 or /dev/sda2, then it's "APPEND hd0 2"
#
kernel chain.c32
append hd0
TEXT HELP
Boot local OS from first hard disk if it's available
ENDTEXT
MENU BEGIN Memtest & FreeDOS
# Note! *.bin is specially purpose for syslinux,
# Do NOT use memtest.bin, use memtest instead of memtest.bin
label memtest
# MENU DEFAULT
# MENU HIDE
MENU LABEL Memory test using Memtest86+
# MENU PASSWD
kernel /live/memtest
TEXT HELP
Run memory test using Memtest86+
ENDTEXT
label FreeDOS
# MENU DEFAULT
# MENU HIDE
MENU LABEL FreeDOS
# MENU PASSWD
kernel memdisk
append initrd=/live/freedos.img
TEXT HELP
Run FreeDOS
ENDTEXT
MENU END
label iPXE
# MENU DEFAULT
# MENU HIDE
MENU LABEL Network boot via iPXE
# MENU PASSWD
kernel /live/ipxe.lkn
TEXT HELP
Run iPXE to enable network (PXE) boot
ENDTEXT
MENU END
--------------------------------------------------------------------------------
================= sda2: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
323.521907806 = 347.379003392 syslinux/syslinux.cfg 1
323.470577240 = 347.323887616 syslinux/chain.c32 1
323.521595001 = 347.378667520 syslinux/ldlinux.c32 1
323.521770477 = 347.378855936 syslinux/libcom32.c32 1
323.470699310 = 347.324018688 syslinux/libutil.c32 1
323.521850586 = 347.378941952 syslinux/menu.c32 1
323.521934509 = 347.379032064 syslinux/vesamenu.c32 1
============== sda2: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/menu.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : not a COM32/COM32R module
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Start Linux Mint 20 Cinnamon 64-bit" --class linuxmint {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename=${iso_path} quiet splash --
initrd /casper/initrd.lz
}
menuentry "Start Linux Mint 20 Cinnamon 64-bit (compatibility mode)" {
linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename=${iso_path} noapic noacpi nosplash irqpoll nomodeset --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed oem-config/enable=true only-ubiquity boot=casper iso-scan/filename=${iso_path} quiet splash --
initrd /casper/initrd.lz
}
menuentry "Check the integrity of the medium" {
linux /casper/vmlinuz boot=casper integrity-check iso-scan/filename=${iso_path} quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown MBR on /dev/sdc
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
00000090 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 81 3e |D.....f@.....f.>|
000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001b0 88 21 00 00 00 00 00 00 9b a3 89 40 00 00 80 00 |.!.........@....|
000001c0 01 00 00 76 e0 f9 00 00 00 00 c0 26 3b 00 00 fe |...v.......&;...|
000001d0 ff ff ef fe ff ff 88 02 00 00 00 1f 00 00 00 73 |...............s|
000001e0 03 f1 83 0f fc d3 00 30 3b 00 00 d0 b4 00 00 00 |.......0;.......|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
/dev/sdc1: unknown GPT attributes
1000000000000001
/dev/sdc2: unknown GPT attributes
1000000000000001
Unknown BootLoader on sdc1
00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
00000090 44 00 0f 82 80 00 66 40 80 c7 02 e2 f2 66 81 3e |D.....f@.....f.>|
000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001b0 88 21 00 00 00 00 00 00 9b a3 89 40 00 00 80 00 |.!.........@....|
000001c0 01 00 00 76 e0 f9 00 00 00 00 c0 26 3b 00 00 fe |...v.......&;...|
000001d0 ff ff ef fe ff ff 88 02 00 00 00 1f 00 00 00 73 |...............s|
000001e0 03 f1 83 0f fc d3 00 30 3b 00 00 d0 b4 00 00 00 |.......0;.......|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdd
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/24894/mountinfo) leaked on lvs invocation. Parent PID 42322: bash
/dev/sdd: open failed: No medium found
/dev/sdd: open failed: No medium found
ADDITIONAL INFORMATION :
=================== log of boot-repair 20211215_1304 ===================
boot-repair version : 4ppa78
boot-sav version : 4ppa78
boot-sav-extra version : 4ppa78
glade2script version : 3.2.4~ppa6
Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
boot-repair is executed in live-session (Linux Mint 20, ulyana, Linuxmint, x86_64)
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 39 bits physical, 48 bits virtual
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename= quiet splash --
ls: cannot access '/home/usr/.config': No such file or directory
NTFS signature is missing.
Failed to mount '/dev/sdc3': Invalid argument
The device '/dev/sdc3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sdc3 : Error code 12
mount -r /dev/sdc3 /mnt/boot-sav/sdc3
NTFS signature is missing.
Failed to mount '/dev/sdc3': Invalid argument
The device '/dev/sdc3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sdc3 : Error code 12
=================== os-prober:
/dev/nvme0n1p1:Ubuntu 18.04.6 LTS (18.04):Ubuntu:linux
/dev/sda1:Ubuntu 18.04.6 LTS (18.04):Ubuntu1:linux
=================== blkid:
/dev/nvme0n1p1: UUID="d4b24ad1-82ac-401e-82a2-9843bcdfd9d6" TYPE="ext4" PTTYPE="dos" PARTUUID="44b32ced-01"
/dev/nvme0n1p2: UUID="720731E15319FF48" TYPE="ntfs" PTTYPE="dos" PARTUUID="44b32ced-02"
/dev/nvme0n1p3: UUID="720731E15319FF48" TYPE="ntfs" PTTYPE="dos" PARTUUID="44b32ced-03"
/dev/sda1: UUID="d4b24ad1-82ac-401e-82a2-9843bcdfd9d6" TYPE="ext4" PTTYPE="dos" PARTUUID="000e5446-01"
/dev/sda2: UUID="d2689a15-377f-4ede-bb3e-eb635db42583" TYPE="ext4" PARTUUID="000e5446-02"
/dev/sda3: UUID="3E6406A50CD98978" TYPE="ntfs" PARTUUID="000e5446-03"
/dev/sdb1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="5EC017DEC017BAEB" TYPE="ntfs" PARTUUID="a01c3b0c-01"
/dev/sdb2: UUID="7C2688232687DD10" TYPE="ntfs" PARTUUID="a01c3b0c-02"
/dev/sdb3: UUID="1EC414E0C414BBC9" TYPE="ntfs" PARTUUID="a01c3b0c-03"
/dev/sdc1: UUID="2020-06-24-19-01-47-00" LABEL="Linux Mint 20 Cinnamon 64-bit" TYPE="iso9660" PTUUID="4089a39b" PTTYPE="dos" PARTUUID="4089a39b-01"
/dev/loop0: TYPE="squashfs"
/dev/sdc2: SEC_TYPE="msdos" UUID="1AC3-20ED" TYPE="vfat" PARTUUID="4089a39b-02"
/dev/sdc3: PARTUUID="4089a39b-03"
2 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
NTFS signature is missing.
Failed to mount '/dev/sdc3': Invalid argument
The device '/dev/sdc3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sdc3 : Error code 12
mount -r /dev/sdc3 /mnt/boot-sav/sdc3
NTFS signature is missing.
Failed to mount '/dev/sdc3': Invalid argument
The device '/dev/sdc3' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sdc3 : Error code 12
Windows not detected by os-prober on sdb2.
dd: invalid number: ‘0’
Warning: /var/log/boot-repair/20211215_130413/sdc/current_mbr.img could not be created. Please report this message to boot.repair@gmail.com
=================== nvme0n1p1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 May 31 2021 grub.d
total 80
-rwxr-xr-x 1 root root 10046 Aug 24 2020 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12808 Aug 24 2020 10_linux
-rwxr-xr-x 1 root root 11298 Aug 24 2020 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Aug 24 2020 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== nvme0n1p1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== nvme0n1p1recordfail=1/grub/grubenv :
recordfail=1
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 May 31 2021 grub.d
total 80
-rwxr-xr-x 1 root root 10046 Aug 24 2020 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12808 Aug 24 2020 10_linux
-rwxr-xr-x 1 root root 11298 Aug 24 2020 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 Aug 24 2020 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 17 2016 40_custom
-rwxr-xr-x 1 root root 216 Jun 17 2016 41_custom
-rw-r--r-- 1 root root 483 Jun 17 2016 README
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Presence of EFI/Boot file detected: /mnt/boot-sav/sdc2/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sdc2/EFI/Boot/grubx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sdc2/EFI/Boot/mmx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: line 195: warning: command substitution: ignored null byte in input
Please install package efibootmgr and retry.
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
nvme0n1p1 : nvme0n1, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/nvme0n1p1.
nvme0n1p2 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/nvme0n1p2.
nvme0n1p3 : nvme0n1, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/nvme0n1p3.
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda1.
sda2 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-maybe-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda2.
sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda3.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb2.
sdb3 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb3.
sdc2 : sdc, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdc2.
sdc3 : sdc, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdc3.
nvme0n1 : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sda : not-GPT, BIOSboot-not-needed, has-maybe-EFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdc : not-GPT, BIOSboot-not-needed, has-correctEFI, usb-disk, not-mmc, no-os, 0 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:msdos:ATA TOSHIBA DT01ACA0:;
1:1049kB:158GB:158GB:ext4::boot;
2:158GB:368GB:210GB:ext4::;
3:368GB:500GB:132GB:ntfs::;
BYT;
/dev/sdb:160GB:scsi:512:512:msdos:ATA STM3160318AS:;
1:1049kB:106MB:105MB:ntfs::boot;
2:106MB:159GB:159GB:ntfs::;
3:159GB:160GB:586MB:ntfs::msftres;
BYT;
/dev/sdc:8053MB:scsi:512:512:unknown:Generic Flash Disk:;
BYT;
/dev/nvme0n1:1000GB:nvme:512:512:msdos:WDC WDS100T2B0C:;
1:1049kB:232GB:232GB:ext4::boot;
2:232GB:378GB:146GB:ntfs::;
3:378GB:1000GB:622GB:ntfs::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.8G
sda disk 465.8G
sda1 part ext4 147.2G
sda2 part ext4 195.3G
sda3 part ntfs 123.3G
sdb disk 149.1G
sdb1 part ntfs 100M Réservé au système
sdb2 part ntfs 148.4G
sdb3 part ntfs 559M
sdc disk iso9660 7.5G Linux Mint 20 Cinnamon 64-bit
sdc1 part iso9660 1.9G Linux Mint 20 Cinnamon 64-bit
sdc2 part vfat 3.9M
sdc3 part 5.7G
sr0 rom 1024M
nvme0n1 disk 931.5G
nvme0n1p1 part ext4 216.1G
nvme0n1p2 part ntfs 135.9G
nvme0n1p3 part ntfs 579.5G
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0 /mnt/boot-sav/sda3
sdb 1 0 0 running
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb2 1 0 0 /mnt/boot-sav/sdb2
sdb3 1 0 0 /mnt/boot-sav/sdb3
sdc 1 0 1 running
sdc1 1 0 1 /cdrom
sdc2 1 0 1 /mnt/boot-sav/sdc2
sdc3 1 0 1
sr0 1 0 1 running
nvme0n1 0 0 0 live
nvme0n1p1 0 0 0 /mnt/boot-sav/nvme0n1p1
nvme0n1p2 0 0 0 /mnt/boot-sav/nvme0n1p2
nvme0n1p3 0 0 0 /mnt/boot-sav/nvme0n1p3
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,noexec,relatime,size=8126312k,nr_inodes=2031578,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=1634364k,mode=755)
/dev/sdc1 on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=/filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
none on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14277)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
tracefs on /sys/kernel/tracing type tracefs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=1634364k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/nvme0n1p1 on /mnt/boot-sav/nvme0n1p1 type ext4 (rw,relatime,stripe=32738)
/dev/nvme0n1p2 on /mnt/boot-sav/nvme0n1p2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/nvme0n1p3 on /mnt/boot-sav/nvme0n1p3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,stripe=32738)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime)
/dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb2 on /mnt/boot-sav/sdb2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb3 on /mnt/boot-sav/sdb3 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdc2 on /mnt/boot-sav/sdc2 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=================== ls:
/sys/block/nvme0n1 (filtered): alignment_offset bdi capability dev device discard_alignment eui events events_async events_poll_msecs ext_range hidden holders inflight integrity lightnvm mq nguid nsid nvme0n1p1 nvme0n1p2 nvme0n1p3 power queue range removable ro size slaves stat subsystem trace uevent uuid wwid
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdb1 sdb2 sdb3 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sdc1 sdc2 sdc3 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 initctl input kmsg kvm lightnvm log lp0 mapper mcelog mei0 mem mqueue net null nvme0 nvme0n1 nvme0n1p1 nvme0n1p2 nvme0n1p3 parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdb2 sdb3 sdc sdc1 sdc2 sdc3 sdd sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout udmabuf uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero zfs
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/nvme0n1p2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 20 00 40 00 00 98 03 1b |........ .@.....|
00000020 00 00 00 00 80 00 80 00 ff 9f fd 10 00 00 00 00 |................|
00000030 04 00 00 00 00 00 00 00 ff d9 0f 01 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 48 ff 19 53 e1 31 07 72 |........H..S.1.r|
00000050 00 00 00 00 0e 1f be 71 7c ac 22 c0 74 0b 56 b4 |.......q|.".t.V.|
00000060 0e bb 07 00 cd 10 5e eb f0 32 e4 cd 16 cd 19 eb |......^..2......|
00000070 fe 54 68 69 73 20 69 73 20 6e 6f 74 20 61 20 62 |.This is not a b|
00000080 6f 6f 74 61 62 6c 65 20 64 69 73 6b 2e 20 50 6c |ootable disk. Pl|
00000090 65 61 73 65 20 69 6e 73 65 72 74 20 61 20 62 6f |ease insert a bo|
000000a0 6f 74 61 62 6c 65 20 66 6c 6f 70 70 79 20 61 6e |otable floppy an|
000000b0 64 0d 0a 70 72 65 73 73 20 61 6e 79 20 6b 65 79 |d..press any key|
000000c0 20 74 6f 20 74 72 79 20 61 67 61 69 6e 20 2e 2e | to try again ..|
000000d0 2e 20 0d 0a 00 00 00 00 00 00 00 00 00 00 00 00 |. ..............|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/nvme0n1p3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 20 00 40 00 00 38 01 2c |........ .@..8.,|
00000020 00 00 00 00 80 00 80 00 ff 2f 6f 48 00 00 00 00 |........./oH....|
00000030 04 00 00 00 00 00 00 00 ff f2 86 04 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 48 ff 19 53 e1 31 07 72 |........H..S.1.r|
00000050 00 00 00 00 0e 1f be 71 7c ac 22 c0 74 0b 56 b4 |.......q|.".t.V.|
00000060 0e bb 07 00 cd 10 5e eb f0 32 e4 cd 16 cd 19 eb |......^..2......|
00000070 fe 54 68 69 73 20 69 73 20 6e 6f 74 20 61 20 62 |.This is not a b|
00000080 6f 6f 74 61 62 6c 65 20 64 69 73 6b 2e 20 50 6c |ootable disk. Pl|
00000090 65 61 73 65 20 69 6e 73 65 72 74 20 61 20 62 6f |ease insert a bo|
000000a0 6f 74 61 62 6c 65 20 66 6c 6f 70 70 79 20 61 6e |otable floppy an|
000000b0 64 0d 0a 70 72 65 73 73 20 61 6e 79 20 6b 65 79 |d..press any key|
000000c0 20 74 6f 20 74 72 79 20 61 67 61 69 6e 20 2e 2e | to try again ..|
000000d0 2e 20 0d 0a 00 00 00 00 00 00 00 00 00 00 00 00 |. ..............|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 d0 cf 2a |........?......*|
00000020 00 00 00 00 80 00 80 00 ff 8f 68 0f 00 00 00 00 |..........h.....|
00000030 04 00 00 00 00 00 00 00 ff 88 f6 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 78 89 d9 0c a5 06 64 3e |........x.....d>|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 1f 03 00 00 00 00 00 |................|
00000030 55 21 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U!..............|
00000040 f6 00 00 00 01 00 00 00 eb ba 17 c0 de 17 c0 5e |...............^|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 03 00 |........?....(..|
00000020 00 00 00 00 80 00 80 00 e4 ef 8c 12 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 10 dd 87 26 23 88 26 7c |...........&#.&||
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb3
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 18 90 12 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 77 11 00 00 00 00 00 |.........w......|
00000030 55 ba 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U...............|
00000040 f6 00 00 00 01 00 00 00 c9 bb 14 c4 e0 14 c4 1e |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdc2
00000000 eb 3c 90 6d 6b 66 73 2e 66 61 74 00 02 04 01 00 |.<.mkfs.fat.....|
00000010 02 00 02 00 1f f8 06 00 20 00 40 00 00 00 00 00 |........ .@.....|
00000020 00 00 00 00 80 01 29 ed 20 c3 1a 4e 4f 20 4e 41 |......). ..NO NA|
00000030 4d 45 20 20 20 20 46 41 54 31 32 20 20 20 0e 1f |ME FAT12 ..|
00000040 be 5b 7c ac 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 |.[|.".t.V.......|
00000050 5e eb f0 32 e4 cd 16 cd 19 eb fe 54 68 69 73 20 |^..2.......This |
00000060 69 73 20 6e 6f 74 20 61 20 62 6f 6f 74 61 62 6c |is not a bootabl|
00000070 65 20 64 69 73 6b 2e 20 20 50 6c 65 61 73 65 20 |e disk. Please |
00000080 69 6e 73 65 72 74 20 61 20 62 6f 6f 74 61 62 6c |insert a bootabl|
00000090 65 20 66 6c 6f 70 70 79 20 61 6e 64 0d 0a 70 72 |e floppy and..pr|
000000a0 65 73 73 20 61 6e 79 20 6b 65 79 20 74 6f 20 74 |ess any key to t|
000000b0 72 79 20 61 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 |ry again ... ...|
000000c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs tmpfs 1.6G 1.6M 1.6G 1% /run
/dev/sdc1 iso9660 1.9G 1.9G 0 100% /cdrom
/dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
/cow overlay 7.8G 259M 7.6G 4% /
tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
tmpfs tmpfs 7.8G 452K 7.8G 1% /tmp
tmpfs tmpfs 1.6G 32K 1.6G 1% /run/user/999
/dev/nvme0n1p1 ext4 213G 107G 96G 53% /mnt/boot-sav/nvme0n1p1
/dev/nvme0n1p2 fuseblk 136G 17G 120G 12% /mnt/boot-sav/nvme0n1p2
/dev/nvme0n1p3 fuseblk 580G 112M 580G 1% /mnt/boot-sav/nvme0n1p3
/dev/sda1 ext4 145G 110G 28G 81% /mnt/boot-sav/sda1
/dev/sda2 ext4 193G 153G 30G 84% /mnt/boot-sav/sda2
/dev/sda3 fuseblk 124G 77G 47G 63% /mnt/boot-sav/sda3
/dev/sdb1 fuseblk 100M 33M 68M 33% /mnt/boot-sav/sdb1
/dev/sdb2 fuseblk 149G 100G 50G 67% /mnt/boot-sav/sdb2
/dev/sdb3 fuseblk 559M 451M 109M 81% /mnt/boot-sav/sdb3
/dev/sdc2 vfat 3.9M 3.9M 10K 100% /mnt/boot-sav/sdc2
=================== fdisk -l:
Disk /dev/loop0: 1.75 GiB, 1863593984 bytes, 3639832 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/nvme0n1: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: WDC WDS100T2B0C
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x44b32ced
Device Boot Start End Sectors Size Id Type
/dev/nvme0n1p1 * 2048 453220351 453218304 216.1G 83 Linux
/dev/nvme0n1p2 453220352 738277375 285057024 135.9G 7 HPFS/NTFS/exFAT
/dev/nvme0n1p3 738277376 1953523711 1215246336 579.5G 7 HPFS/NTFS/exFAT
Disk /dev/sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk model: TOSHIBA DT01ACA0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x000e5446
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 308662204 308660157 147.2G 83 Linux
/dev/sda2 308662272 718262271 409600000 195.3G 83 Linux
/dev/sda3 718262272 976773119 258510848 123.3G 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 149.5 GiB, 160041885696 bytes, 312581808 sectors
Disk model: STM3160318AS
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa01c3b0c
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 206847 204800 100M 7 HPFS/NTFS/exFAT
/dev/sdb2 206848 311433188 311226341 148.4G 7 HPFS/NTFS/exFAT
/dev/sdb3 311433216 312578047 1144832 559M 27 Hidden NTFS WinRE
Disk /dev/sdc: 7.51 GiB, 8053063680 bytes, 15728640 sectors
Disk model: Flash Disk
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x4089a39b
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 0 3876543 3876544 1.9G 0 Empty
/dev/sdc2 648 8583 7936 3.9M ef EFI (FAT-12/16/32)
/dev/sdc3 3878912 15728639 11849728 5.7G 83 Linux
User choice: Is nvme0n1 (WDC WDS100T2B0C) a removable disk? no
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of nvme0n1p1 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on nvme0n1 (WDC WDS100T2B0C) disk!
The boot files of [Ubuntu 18.04.6 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
=================== User settings
The settings chosen by the user will not act on the boot.
paste2.org ko ()retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#25 Le 15/12/2021, à 15:27
- Henri56
Re : cloner dual boot ubuntu/win10 sur deux hdd vers un ssd (résolu)
et remerci Mint j ai pu changer l uuid de mon ssd dans gparted
voici le nouveau rapport boot-info . https://paste.ubuntu.com/p/zcTjzjJcm9/
Hors ligne