#1 Le 14/12/2021, à 20:48
- Phil17
Lenteur au démarrage (et à l'arrêt) après ré-installation
Bonjour à tous,
Je me suis décidé à virer Windows 10 de mon ordinateur, je ne m'en servais que pour un logiciel, je fais avec.
Alors que j'ai un SSD et un ordinateur récent, une installation fraîche ne comportant que Xubuntu 20.04.03 installé à partir d'une clé USB dont j'ai vérifié le SHA avant, il me faut un peu plus de 45 secondes pour avoir le bureau, et dans ces 45 secondes, j'ai très longtemps le logo Dell d'affiché.
J'ai cherché un peu sur les forums sans trop comprendre, et sur mon disque, à la racine de mon home, j'ai un fichier caché nommé ".xsession-errors" assez important qui me donne des "warning" et "critical".
J'ai désinstallé la carte graphique Nvidia et suis théoriquement avec la carte Intel et le pilote "Nouveau".
Que puis-je faire ou chercher ?
Voici quelques pistes dans le Terminal et le fichier .xsession-errors pour information. Je me suis servi des commandes que les excellent Xubu ou malbo (sans compter les autres que j'oublie) demandaient au début d'un dépannage.
Merci d'avance,
Philippe
phil@phil-XPS-15-7590:~$ inxi -Fxz
System: Kernel: 5.11.0-41-generic x86_64 bits: 64 compiler: N/A Desktop: Xfce 4.14.2
Distro: Ubuntu 20.04.3 LTS (Focal Fossa)
Machine: Type: Laptop System: Dell product: XPS 15 7590 v: N/A serial: <filter>
Mobo: Dell model: 018W12 v: A05 serial: <filter> UEFI: Dell v: 1.14.1 date: 10/11/2021
Battery: ID-1: BAT0 charge: 82.1 Wh condition: 82.1/97.0 Wh (85%) model: SMP DELL GPM0365 status: Full
CPU: Topology: 6-Core model: Intel Core i7-9750H bits: 64 type: MT MCP arch: Kaby Lake rev: A L2 cache: 12.0 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 62399
Speed: 2000 MHz min/max: 800/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000 4: 2000 5: 2000 6: 2000 7: 2000
8: 1950 9: 2000 10: 1911 11: 2001 12: 2000
Graphics: Device-1: Intel UHD Graphics 630 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0
Device-2: NVIDIA TU117M [GeForce GTX 1650 Mobile / Max-Q] vendor: Hewlett-Packard driver: nouveau v: kernel
bus ID: 01:00.0
Display: x11 server: X.Org 1.20.11 driver: modesetting unloaded: fbdev,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 21.0.3 direct render: Yes
Audio: Device-1: Intel Cannon Lake PCH cAVS vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1f.3
Sound Server: ALSA v: k5.11.0-41-generic
Network: Device-1: Intel Wi-Fi 6 AX200 vendor: Bigfoot Networks driver: iwlwifi v: kernel port: 3000 bus ID: 3b:00.0
IF: wlp59s0 state: up mac: <filter>
Drives: Local Storage: total: 476.94 GiB used: 251.53 GiB (52.7%)
ID-1: /dev/nvme0n1 vendor: SK Hynix model: PC601 NVMe 512GB size: 476.94 GiB
Partition: ID-1: / size: 18.21 GiB used: 9.44 GiB (51.8%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /home size: 449.63 GiB used: 242.04 GiB (53.8%) fs: ext4 dev: /dev/nvme0n1p3
Sensors: System Temperatures: cpu: 41.0 C mobo: N/A gpu: nouveau temp: 38 C
Fan Speeds (RPM): cpu: 0 fan-2: 0
Info: Processes: 313 Uptime: 1h 16m Memory: 15.27 GiB used: 2.09 GiB (13.7%) Init: systemd runlevel: 5 Compilers:
gcc: 9.3.0 Shell: bash v: 5.0.17 inxi: 3.0.38
phil@phil-XPS-15-7590:~$ Note concernant dmesg, je n'arrive pas à avoir le début
[ 0.139392] smpboot: Total of 12 processors activated (62399.80 BogoMIPS)
[ 0.142107] devtmpfs: initialized
[ 0.142107] x86/mm: Memory block size: 128MB
[ 0.142767] PM: Registering ACPI NVS region [mem 0x5bdc0000-0x5bdc0fff] (4096 bytes)
[ 0.142767] PM: Registering ACPI NVS region [mem 0x6d03a000-0x6d9aefff] (9916416 bytes)
[ 0.142767] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.142767] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.142767] pinctrl core: initialized pinctrl subsystem
[ 0.142767] PM: RTC time: 16:52:39, date: 2021-12-14
[ 0.142767] NET: Registered protocol family 16
[ 0.142767] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.142785] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.142920] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.142927] audit: initializing netlink subsys (disabled)
[ 0.142934] audit: type=2000 audit(1639500759.024:1): state=initialized audit_enabled=0 res=1
[ 0.142934] thermal_sys: Registered thermal governor 'fair_share'
[ 0.142934] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.142934] thermal_sys: Registered thermal governor 'step_wise'
[ 0.142934] thermal_sys: Registered thermal governor 'user_space'
[ 0.142934] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.142934] EISA bus registered
[ 0.142934] cpuidle: using governor ladder
[ 0.142934] cpuidle: using governor menu
[ 0.142934] Simple Boot Flag at 0x47 set to 0x80
[ 0.142934] ACPI: bus type PCI registered
[ 0.142934] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.142934] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.142934] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.142934] PCI: Using configuration type 1 for base access
[ 0.145743] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.146874] Kprobes globally optimized
[ 0.146879] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.146879] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.146879] ACPI: Added _OSI(Module Device)
[ 0.146879] ACPI: Added _OSI(Processor Device)
[ 0.146879] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.146879] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146879] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.146879] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.146879] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.222401] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.288593] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.303465] ACPI: Dynamic OEM Table Load:
[ 0.303473] ACPI: SSDT 0xFFFF92A2C170C900 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
[ 0.305529] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.306859] ACPI: Dynamic OEM Table Load:
[ 0.306867] ACPI: SSDT 0xFFFF92A2C1721000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.309090] ACPI: Dynamic OEM Table Load:
[ 0.309097] ACPI: SSDT 0xFFFF92A2C18AF800 000560 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.311419] ACPI: Dynamic OEM Table Load:
[ 0.311425] ACPI: SSDT 0xFFFF92A2C1729E00 000149 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.313537] ACPI: Dynamic OEM Table Load:
[ 0.313544] ACPI: SSDT 0xFFFF92A2C18AD000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.316029] ACPI: Dynamic OEM Table Load:
[ 0.316037] ACPI: SSDT 0xFFFF92A2C18AA800 0005FC (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.318364] ACPI: Dynamic OEM Table Load:
[ 0.318370] ACPI: SSDT 0xFFFF92A2C1727800 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.320731] ACPI: Dynamic OEM Table Load:
[ 0.320739] ACPI: SSDT 0xFFFF92A2C0D2A000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527)
[ 0.323863] ACPI: Dynamic OEM Table Load:
[ 0.323870] ACPI: SSDT 0xFFFF92A2C1726400 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.332324] ACPI: EC: EC started
[ 0.332325] ACPI: EC: interrupt blocked
[ 0.341283] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.341288] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.341290] ACPI: Interpreter enabled
[ 0.341349] ACPI: (supports S0 S3 S4 S5)
[ 0.341351] ACPI: Using IOAPIC for interrupt routing
[ 0.341406] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.342273] ACPI: Enabled 10 GPEs in block 00 to 7F
[ 0.346230] ACPI: Power Resource [PG00] (on)
[ 0.350297] ACPI: Power Resource [WRST] (on)
[ 0.350365] ACPI: Power Resource [DRST] (on)
[ 0.356064] ACPI: Power Resource [PXP] (on)
[ 0.364039] ACPI: Power Resource [USBC] (on)
[ 0.368674] ACPI: Power Resource [V0PR] (on)
[ 0.368929] ACPI: Power Resource [V1PR] (on)
[ 0.369178] ACPI: Power Resource [V2PR] (on)
[ 0.377271] ACPI: Power Resource [WRST] (on)
[ 0.385375] ACPI: Power Resource [PIN] (off)
[ 0.385561] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.385561] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.385561] acpi PNP0A08:00: _OSC: platform does not support [AER]
[ 0.395554] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[ 0.396742] PCI host bridge to bus 0000:00
[ 0.396747] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.396749] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.396751] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.396753] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.396754] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
[ 0.396757] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.396780] pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
[ 0.396938] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.396987] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.397308] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
[ 0.397319] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
[ 0.397326] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.397330] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.397350] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.397538] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.397548] pci 0000:00:04.0: reg 0x10: [mem 0xed510000-0xed517fff 64bit]
[ 0.397819] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.397830] pci 0000:00:08.0: reg 0x10: [mem 0xed528000-0xed528fff 64bit]
[ 0.398094] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.398132] pci 0000:00:12.0: reg 0x10: [mem 0xed527000-0xed527fff 64bit]
[ 0.398509] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.398546] pci 0000:00:14.0: reg 0x10: [mem 0xed500000-0xed50ffff 64bit]
[ 0.398692] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.398947] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.398979] pci 0000:00:14.2: reg 0x10: [mem 0xed51e000-0xed51ffff 64bit]
[ 0.398999] pci 0000:00:14.2: reg 0x18: [mem 0xed526000-0xed526fff 64bit]
[ 0.399676] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
[ 0.400249] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.403147] pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
[ 0.403720] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.406277] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.406311] pci 0000:00:16.0: reg 0x10: [mem 0xed523000-0xed523fff 64bit]
[ 0.406437] pci 0000:00:16.0: PME# supported from D3hot
[ 0.406780] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
[ 0.406826] pci 0000:00:17.0: reg 0x10: [mem 0xed51c000-0xed51dfff]
[ 0.406850] pci 0000:00:17.0: reg 0x14: [mem 0xed522000-0xed5220ff]
[ 0.406876] pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
[ 0.406900] pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
[ 0.406924] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.406948] pci 0000:00:17.0: reg 0x24: [mem 0xed521000-0xed5217ff]
[ 0.407085] pci 0000:00:17.0: PME# supported from D3hot
[ 0.407401] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[ 0.407713] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.407793] pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
[ 0.408095] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[ 0.408329] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.408413] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[ 0.408755] pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400
[ 0.408994] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.409077] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[ 0.409412] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.409688] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.409772] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.410140] pci 0000:00:1f.0: [8086:a30e] type 00 class 0x060100
[ 0.410538] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040380
[ 0.410597] pci 0000:00:1f.3: reg 0x10: [mem 0xed518000-0xed51bfff 64bit]
[ 0.410672] pci 0000:00:1f.3: reg 0x20: [mem 0xed100000-0xed1fffff 64bit]
[ 0.410823] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.411190] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.411370] pci 0000:00:1f.4: reg 0x10: [mem 0xed520000-0xed5200ff 64bit]
[ 0.411584] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.412022] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.412049] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.412361] pci 0000:01:00.0: [10de:1f91] type 00 class 0x030200
[ 0.412382] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
[ 0.412398] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.412414] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.412424] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.412434] pci 0000:01:00.0: reg 0x30: [mem 0xed000000-0xed07ffff pref]
[ 0.412528] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.412728] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.412732] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.412734] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff]
[ 0.412738] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.412981] pci 0000:02:00.0: [8086:15da] type 01 class 0x060400
[ 0.413074] pci 0000:02:00.0: enabling Extended Tags
[ 0.413243] pci 0000:02:00.0: supports D1 D2
[ 0.413244] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.413486] pci 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 0.413496] pci 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.413506] pci 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.413637] pci 0000:03:00.0: [8086:15da] type 01 class 0x060400
[ 0.413733] pci 0000:03:00.0: enabling Extended Tags
[ 0.413899] pci 0000:03:00.0: supports D1 D2
[ 0.413900] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.414105] pci 0000:03:01.0: [8086:15da] type 01 class 0x060400
[ 0.414200] pci 0000:03:01.0: enabling Extended Tags
[ 0.414368] pci 0000:03:01.0: supports D1 D2
[ 0.414369] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.414570] pci 0000:03:02.0: [8086:15da] type 01 class 0x060400
[ 0.414664] pci 0000:03:02.0: enabling Extended Tags
[ 0.414826] pci 0000:03:02.0: supports D1 D2
[ 0.414827] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.415066] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[ 0.415080] pci 0000:02:00.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.415089] pci 0000:02:00.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.415194] pci 0000:04:00.0: [8086:15d9] type 00 class 0x088000
[ 0.415223] pci 0000:04:00.0: reg 0x10: [mem 0xea000000-0xea03ffff]
[ 0.415240] pci 0000:04:00.0: reg 0x14: [mem 0xea040000-0xea040fff]
[ 0.415327] pci 0000:04:00.0: enabling Extended Tags
[ 0.415488] pci 0000:04:00.0: supports D1 D2
[ 0.415489] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.415683] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.415697] pci 0000:03:00.0: bridge window [mem 0xea000000-0xea0fffff]
[ 0.415776] pci 0000:03:01.0: PCI bridge to [bus 05-39]
[ 0.415790] pci 0000:03:01.0: bridge window [mem 0xd4000000-0xe9efffff]
[ 0.415799] pci 0000:03:01.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.415920] pci 0000:3a:00.0: [8086:15db] type 00 class 0x0c0330
[ 0.415950] pci 0000:3a:00.0: reg 0x10: [mem 0xe9f00000-0xe9f0ffff]
[ 0.416061] pci 0000:3a:00.0: enabling Extended Tags
[ 0.416228] pci 0000:3a:00.0: supports D1 D2
[ 0.416229] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.416357] pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.416458] pci 0000:03:02.0: PCI bridge to [bus 3a]
[ 0.416472] pci 0000:03:02.0: bridge window [mem 0xe9f00000-0xe9ffffff]
[ 0.417510] pci 0000:3b:00.0: [8086:2723] type 00 class 0x028000
[ 0.418225] pci 0000:3b:00.0: reg 0x10: [mem 0xed400000-0xed403fff 64bit]
[ 0.420234] pci 0000:3b:00.0: PME# supported from D0 D3hot D3cold
[ 0.421992] pci 0000:00:1c.0: PCI bridge to [bus 3b]
[ 0.422002] pci 0000:00:1c.0: bridge window [mem 0xed400000-0xed4fffff]
[ 0.422249] pci 0000:3c:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.422285] pci 0000:3c:00.0: reg 0x14: [mem 0xed300000-0xed300fff]
[ 0.422462] pci 0000:3c:00.0: supports D1 D2
[ 0.422463] pci 0000:3c:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.422688] pci 0000:00:1c.4: PCI bridge to [bus 3c]
[ 0.422698] pci 0000:00:1c.4: bridge window [mem 0xed300000-0xed3fffff]
[ 0.422996] pci 0000:3d:00.0: [1c5c:1627] type 00 class 0x010802
[ 0.423033] pci 0000:3d:00.0: reg 0x10: [mem 0xed200000-0xed203fff 64bit]
[ 0.423048] pci 0000:3d:00.0: reg 0x18: [mem 0xed205000-0xed205fff]
[ 0.423064] pci 0000:3d:00.0: reg 0x1c: [mem 0xed204000-0xed204fff]
[ 0.423503] pci 0000:00:1d.0: PCI bridge to [bus 3d]
[ 0.423513] pci 0000:00:1d.0: bridge window [mem 0xed200000-0xed2fffff]
[ 0.427542] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.427670] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[ 0.427797] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.427921] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.428045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.428167] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.428290] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.428413] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 0.450017] ACPI: EC: interrupt unblocked
[ 0.450017] ACPI: EC: event unblocked
[ 0.450017] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.450017] ACPI: EC: GPE=0x6e
[ 0.450017] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.450017] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.450041] iommu: Default domain type: Translated
[ 0.450041] SCSI subsystem initialized
[ 0.450041] libata version 3.00 loaded.
[ 0.450041] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.450041] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.450041] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.450041] vgaarb: loaded
[ 0.450041] ACPI: bus type USB registered
[ 0.450041] usbcore: registered new interface driver usbfs
[ 0.450041] usbcore: registered new interface driver hub
[ 0.450041] usbcore: registered new device driver usb
[ 0.450041] pps_core: LinuxPPS API ver. 1 registered
[ 0.450041] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.450041] PTP clock support registered
[ 0.450041] EDAC MC: Ver: 3.0.0
[ 0.450137] Registered efivars operations
[ 0.450137] NetLabel: Initializing
[ 0.450137] NetLabel: domain hash size = 128
[ 0.450137] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.450137] NetLabel: unlabeled traffic allowed by default
[ 0.450137] PCI: Using ACPI for IRQ routing
[ 0.480272] PCI: pci_cache_line_size set to 64 bytes
[ 0.480780] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.480783] e820: reserve RAM buffer [mem 0x586f1018-0x5bffffff]
[ 0.480784] e820: reserve RAM buffer [mem 0x5bdc0000-0x5bffffff]
[ 0.480786] e820: reserve RAM buffer [mem 0x669a2000-0x67ffffff]
[ 0.480787] e820: reserve RAM buffer [mem 0x68f61000-0x6bffffff]
[ 0.480788] e820: reserve RAM buffer [mem 0x6b845000-0x6bffffff]
[ 0.480789] e820: reserve RAM buffer [mem 0x78e00000-0x7bffffff]
[ 0.480790] e820: reserve RAM buffer [mem 0x47c800000-0x47fffffff]
[ 0.481992] clocksource: Switched to clocksource tsc-early
[ 0.490945] VFS: Disk quotas dquot_6.6.0
[ 0.490962] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.491068] AppArmor: AppArmor Filesystem Enabled
[ 0.491104] pnp: PnP ACPI init
[ 0.491232] system 00:00: [mem 0x40000000-0x403fffff] has been reserved
[ 0.491239] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.491489] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.491492] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.491496] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.491558] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.491692] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.491697] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.491885] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.491904] pnp 00:05: Plug and Play ACPI device, IDs DLL0905 PNP0f13 (active)
[ 0.492171] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.492174] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.492176] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.492177] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.492179] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.492181] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.492183] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.492185] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.492189] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.492519] system 00:07: [io 0x1800-0x18fe] could not be reserved
[ 0.492522] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.492524] system 00:07: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.492526] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.492527] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.492529] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.492531] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.492535] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.492978] system 00:08: [io 0x2000-0x20fe] has been reserved
[ 0.492983] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.494584] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.503359] pnp: PnP ACPI: found 10 devices
[ 0.509170] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.509231] NET: Registered protocol family 2
[ 0.509388] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.511513] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.511598] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.511784] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.511901] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.511976] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.512038] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.512085] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.512149] NET: Registered protocol family 1
[ 0.512154] NET: Registered protocol family 44
[ 0.512162] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-39] add_size 1000
[ 0.512167] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-3a] add_size 1000
[ 0.512169] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 2000
[ 0.512179] pci 0000:00:15.0: BAR 0: assigned [mem 0x7f800000-0x7f800fff 64bit]
[ 0.512452] pci 0000:00:15.1: BAR 0: assigned [mem 0x7f801000-0x7f801fff 64bit]
[ 0.512719] pci 0000:00:1b.0: BAR 13: assigned [io 0x5000-0x6fff]
[ 0.512722] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.512724] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.512727] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff]
[ 0.512730] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.512734] pci 0000:02:00.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.512737] pci 0000:03:01.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.512738] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.512751] pci 0000:03:00.0: bridge window [mem 0xea000000-0xea0fffff]
[ 0.512765] pci 0000:03:01.0: PCI bridge to [bus 05-39]
[ 0.512769] pci 0000:03:01.0: bridge window [io 0x5000-0x5fff]
[ 0.512776] pci 0000:03:01.0: bridge window [mem 0xd4000000-0xe9efffff]
[ 0.512782] pci 0000:03:01.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.512792] pci 0000:03:02.0: PCI bridge to [bus 3a]
[ 0.512799] pci 0000:03:02.0: bridge window [mem 0xe9f00000-0xe9ffffff]
[ 0.512813] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[ 0.512816] pci 0000:02:00.0: bridge window [io 0x5000-0x5fff]
[ 0.512824] pci 0000:02:00.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.512829] pci 0000:02:00.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.512839] pci 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 0.512843] pci 0000:00:1b.0: bridge window [io 0x5000-0x6fff]
[ 0.512850] pci 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.512856] pci 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.512866] pci 0000:00:1c.0: PCI bridge to [bus 3b]
[ 0.512875] pci 0000:00:1c.0: bridge window [mem 0xed400000-0xed4fffff]
[ 0.512889] pci 0000:00:1c.4: PCI bridge to [bus 3c]
[ 0.512896] pci 0000:00:1c.4: bridge window [mem 0xed300000-0xed3fffff]
[ 0.512910] pci 0000:00:1d.0: PCI bridge to [bus 3d]
[ 0.512917] pci 0000:00:1d.0: bridge window [mem 0xed200000-0xed2fffff]
[ 0.512931] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.512933] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.512935] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.512936] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xefffffff window]
[ 0.512938] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[ 0.512940] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.512941] pci_bus 0000:01: resource 1 [mem 0xec000000-0xed0fffff]
[ 0.512942] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.512944] pci_bus 0000:02: resource 0 [io 0x5000-0x6fff]
[ 0.512945] pci_bus 0000:02: resource 1 [mem 0xd4000000-0xea0fffff]
[ 0.512947] pci_bus 0000:02: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.512948] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.512950] pci_bus 0000:03: resource 1 [mem 0xd4000000-0xea0fffff]
[ 0.512951] pci_bus 0000:03: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.512953] pci_bus 0000:04: resource 1 [mem 0xea000000-0xea0fffff]
[ 0.512954] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 0.512956] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xe9efffff]
[ 0.512957] pci_bus 0000:05: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.512959] pci_bus 0000:3a: resource 1 [mem 0xe9f00000-0xe9ffffff]
[ 0.512960] pci_bus 0000:3b: resource 1 [mem 0xed400000-0xed4fffff]
[ 0.512963] pci_bus 0000:3c: resource 1 [mem 0xed300000-0xed3fffff]
[ 0.512965] pci_bus 0000:3d: resource 1 [mem 0xed200000-0xed2fffff]
[ 0.513159] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.513677] pci 0000:02:00.0: CLS mismatch (64 != 128), using 64 bytes
[ 0.513867] pci 0000:02:00.0: enabling device (0006 -> 0007)
[ 0.514211] Trying to unpack rootfs image as initramfs...
[ 0.662158] Freeing initrd memory: 56772K
[ 0.662237] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.662238] software IO TLB: mapped [mem 0x00000000629a2000-0x00000000669a2000] (64MB)
[ 0.662628] sgx: EPC section 0x70200000-0x75f7ffff
[ 0.662934] check: Scanning for low memory corruption every 60 seconds
[ 0.663414] Initialise system trusted keyrings
[ 0.663430] Key type blacklist registered
[ 0.663461] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.664595] zbud: loaded
[ 0.664873] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.664996] fuse: init (API version 7.33)
[ 0.665142] integrity: Platform Keyring initialized
[ 0.674948] Key type asymmetric registered
[ 0.674950] Asymmetric key parser 'x509' registered
[ 0.674957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.674987] io scheduler mq-deadline registered
[ 0.675430] pcieport 0000:00:01.0: PME: Signaling with IRQ 122
[ 0.675580] pcieport 0000:00:1b.0: PME: Signaling with IRQ 123
[ 0.675621] pcieport 0000:00:1b.0: pciehp: Slot #20 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.676050] pcieport 0000:00:1c.0: PME: Signaling with IRQ 124
[ 0.676443] pcieport 0000:00:1c.4: PME: Signaling with IRQ 125
[ 0.676831] pcieport 0000:00:1d.0: PME: Signaling with IRQ 126
[ 0.677450] pcieport 0000:03:01.0: enabling device (0006 -> 0007)
[ 0.677634] pcieport 0000:03:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.678096] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.678160] efifb: probing for efifb
[ 0.678188] efifb: showing boot graphics
[ 0.678802] efifb: framebuffer at 0x80000000, using 8100k, total 8100k
[ 0.678804] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.678806] efifb: scrolling: redraw
[ 0.678807] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.678845] fbcon: Deferring console take-over
[ 0.678846] fb0: EFI VGA frame buffer device
[ 0.678853] intel_idle: MWAIT substates: 0x11142120
[ 0.678855] intel_idle: v0.5.1 model 0x9E
[ 0.679741] intel_idle: Local APIC timer is reliable in all C-states
[ 0.682333] ACPI: AC Adapter [AC] (on-line)
[ 0.682415] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.682448] ACPI: Lid Switch [LID0]
[ 0.682476] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.682500] ACPI: Power Button [PBTN]
[ 0.682526] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.682540] ACPI: Sleep Button [SBTN]
[ 0.682733] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1024
[ 0.687056] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.687059] ACPI: Thermal Zone [THM] (25 C)
[ 0.687279] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.690684] hpet_acpi_add: no address or irqs in _CRS
[ 0.690783] Linux agpgart interface v0.103
[ 0.721740] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[ 0.747537] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.897907] loop: module loaded
[ 0.898414] libphy: Fixed MDIO Bus: probed
[ 0.898416] tun: Universal TUN/TAP device driver, 1.6
[ 0.898518] PPP generic driver version 2.4.2
[ 0.898738] VFIO - User Level meta-driver version: 0.3
[ 0.898925] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.898929] ehci-pci: EHCI PCI platform driver
[ 0.898945] ehci-platform: EHCI generic platform driver
[ 0.898963] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.898965] ohci-pci: OHCI PCI platform driver
[ 0.898975] ohci-platform: OHCI generic platform driver
[ 0.898984] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.899033] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.899459] i8042: Warning: Keylock active
[ 0.902974] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.902979] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.903169] mousedev: PS/2 mouse device common for all mice
[ 0.903460] rtc_cmos 00:02: RTC can wake from S4
[ 0.905125] rtc_cmos 00:02: registered as rtc0
[ 0.905532] rtc_cmos 00:02: setting system clock to 2021-12-14T16:52:40 UTC (1639500760)
[ 0.905594] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[ 0.905603] i2c /dev entries driver
[ 0.905656] device-mapper: uevent: version 1.0.3
[ 0.905709] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 0.905752] platform eisa.0: Probing EISA bus 0
[ 0.905754] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.905756] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.905757] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.905759] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.905760] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.905761] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.905762] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.905763] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.905765] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.905766] platform eisa.0: EISA: Detected 0 cards
[ 0.905769] intel_pstate: Intel P-state driver initializing
[ 0.905922] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.908239] intel_pstate: Disabling energy efficiency optimization
[ 0.908241] intel_pstate: HWP enabled
[ 0.908402] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.908407] EFI Variables Facility v0.08 2004-May-17
[ 0.984660] intel_pmc_core INT33A1:00: initialized
[ 0.984752] drop_monitor: Initializing network drop monitor service
[ 0.984893] NET: Registered protocol family 10
[ 0.991456] Segment Routing with IPv6
[ 0.991478] NET: Registered protocol family 17
[ 0.991644] Key type dns_resolver registered
[ 0.992848] microcode: sig=0x906ea, pf=0x20, revision=0xea
[ 0.993191] microcode: Microcode Update Driver: v2.2.
[ 0.993195] IPI shorthand broadcast: enabled
[ 0.993205] sched_clock: Marking stable (980298759, 12889615)->(1020261602, -27073228)
[ 0.993318] registered taskstats version 1
[ 0.993327] Loading compiled-in X.509 certificates
[ 0.994041] Loaded X.509 cert 'Build time autogenerated kernel key: 3877ad89aa436aebfa70972f220832a71437c806'
[ 0.994621] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.995191] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.995193] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.995214] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.995518] zswap: loaded using pool lzo/zbud
[ 0.995849] Key type ._fscrypt registered
[ 0.995851] Key type .fscrypt registered
[ 0.995852] Key type fscrypt-provisioning registered
[ 0.995889] Key type trusted registered
[ 0.998857] Key type encrypted registered
[ 0.998861] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.000642] integrity: Loading X.509 certificate: UEFI:db
[ 1.000671] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 1.000672] integrity: Loading X.509 certificate: UEFI:db
[ 1.000696] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.000697] integrity: Loading X.509 certificate: UEFI:db
[ 1.000714] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.001885] integrity: Revoking X.509 certificate: UEFI:dbx
[ 1.001913] blacklist: Revoked X.509 cert 'Microsoft Windows PCA 2010: d14fa98a0708cef4241898e500fff3d6791d37bc'
[ 1.002347] integrity: Revoking X.509 certificate: UEFI:dbx
[ 1.002368] blacklist: Revoked X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.002369] integrity: Revoking X.509 certificate: UEFI:dbx
[ 1.002381] blacklist: Revoked X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.003337] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 1.003969] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 1.003977] ima: Allocated hash algorithm: sha1
[ 1.093987] ima: No architecture policies found
[ 1.094018] evm: Initialising EVM extended attributes:
[ 1.094020] evm: security.selinux
[ 1.094024] evm: security.SMACK64
[ 1.094026] evm: security.SMACK64EXEC
[ 1.094027] evm: security.SMACK64TRANSMUTE
[ 1.094029] evm: security.SMACK64MMAP
[ 1.094031] evm: security.apparmor
[ 1.094033] evm: security.ima
[ 1.094034] evm: security.capability
[ 1.094036] evm: HMAC attrs: 0x1
[ 1.098579] PM: Magic number: 1:127:894
[ 1.099128] RAS: Correctable Errors collector initialized.
[ 1.101745] Freeing unused decrypted memory: 2036K
[ 1.102617] Freeing unused kernel image (initmem) memory: 2688K
[ 1.149888] Write protecting the kernel read-only data: 28672k
[ 1.151200] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 1.152064] Freeing unused kernel image (rodata/data gap) memory: 1940K
[ 1.235932] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.235934] x86/mm: Checking user space page tables
[ 1.294605] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.294610] Run /init as init process
[ 1.294611] with arguments:
[ 1.294612] /init
[ 1.294613] splash
[ 1.294614] with environment:
[ 1.294615] HOME=/
[ 1.294615] TERM=linux
[ 1.294616] BOOT_IMAGE=/boot/vmlinuz-5.11.0-41-generic
[ 1.403793] hid: raw HID events driver (C) Jiri Kosina
[ 1.406954] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.406991] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.407596] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 1.407793] wmi_bus wmi_bus-PNP0C14:05: WQBC data block query control method not found
[ 1.407799] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 1.408332] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 1.409542] ahci 0000:00:17.0: version 3.0
[ 1.412247] rtsx_pci 0000:3c:00.0: enabling device (0000 -> 0002)
[ 1.413046] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.413052] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.413057] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.413416] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.413421] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.413423] usb usb1: Product: xHCI Host Controller
[ 1.413425] usb usb1: Manufacturer: Linux 5.11.0-41-generic xhci-hcd
[ 1.413427] usb usb1: SerialNumber: 0000:00:14.0
[ 1.414187] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.414282] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.414474] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x0 impl SATA mode
[ 1.414484] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
[ 1.417481] nvme nvme0: pci function 0000:3d:00.0
[ 1.422043] hub 1-0:1.0: USB hub found
[ 1.422068] hub 1-0:1.0: 16 ports detected
[ 1.423675] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 1.424186] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 1.425902] rtsx_pci 0000:3c:00.0: Unbalanced pm_runtime_enable!
[ 1.429164] acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 1.430904] scsi host0: ahci
[ 1.431000] ata1: DUMMY
[ 1.442205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.442210] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442215] usb usb2: Product: xHCI Host Controller
[ 1.442218] usb usb2: Manufacturer: Linux 5.11.0-41-generic xhci-hcd
[ 1.442221] usb usb2: SerialNumber: 0000:00:14.0
[ 1.442577] hub 2-0:1.0: USB hub found
[ 1.442614] hub 2-0:1.0: 10 ports detected
[ 1.445140] usb: port power management may be unreliable
[ 1.445302] acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 1.451459] xhci_hcd 0000:3a:00.0: xHCI Host Controller
[ 1.451465] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 3
[ 1.452656] xhci_hcd 0000:3a:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 1.453049] xhci_hcd 0000:3a:00.0: xHCI Host Controller
[ 1.453052] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 4
[ 1.453055] xhci_hcd 0000:3a:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.453091] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.453095] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.453097] usb usb3: Product: xHCI Host Controller
[ 1.453098] usb usb3: Manufacturer: Linux 5.11.0-41-generic xhci-hcd
[ 1.453100] usb usb3: SerialNumber: 0000:3a:00.0
[ 1.453232] hub 3-0:1.0: USB hub found
[ 1.453248] hub 3-0:1.0: 2 ports detected
[ 1.453827] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.453830] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.453832] usb usb4: Product: xHCI Host Controller
[ 1.453833] usb usb4: Manufacturer: Linux 5.11.0-41-generic xhci-hcd
[ 1.453841] usb usb4: SerialNumber: 0000:3a:00.0
[ 1.453947] hub 4-0:1.0: USB hub found
[ 1.453964] hub 4-0:1.0: 2 ports detected
[ 1.515154] i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
[ 1.515158] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.515617] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 1.515817] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.516048] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 1.530162] nvme nvme0: missing or invalid SUBNQN field.
[ 1.669929] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.674949] nvme0n1: p1 p2 p3
[ 1.685600] tsc: Refined TSC clocksource calibration: 2592.004 MHz
[ 1.685618] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cbae350f, max_idle_ns: 440795327587 ns
[ 1.685689] clocksource: Switched to clocksource tsc
[ 1.701664] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 1.851061] usb 1-4: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[ 1.851073] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.977841] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 2.002007] i2c_hid i2c-SYNA2393:00: supply vdd not found, using dummy regulator
[ 2.002102] i2c_hid i2c-SYNA2393:00: supply vddl not found, using dummy regulator
[ 2.128951] usb 1-7: New USB device found, idVendor=27c6, idProduct=5395, bcdDevice= 1.00
[ 2.128963] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.128969] usb 1-7: Product: Goodix Fingerprint Device
[ 2.128972] usb 1-7: Manufacturer: HTMicroelectronics
[ 2.128976] usb 1-7: SerialNumber: HTK32
[ 2.159708] input: SYNA2393:00 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2393:00/0018:06CB:7A13.0001/input/input6
[ 2.159873] input: SYNA2393:00 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2393:00/0018:06CB:7A13.0001/input/input7
[ 2.159941] hid-generic 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA2393:00 06CB:7A13] on i2c-SYNA2393:00
[ 2.201671] psmouse serio1: synaptics: Unable to query device: -5
[ 2.392571] fbcon: Taking over console
[ 2.392624] Console: switching to colour frame buffer device 240x67
[ 2.404619] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 2.493740] systemd[1]: Inserted module 'autofs4'
[ 2.673381] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.690065] systemd[1]: Detected architecture x86-64.
[ 2.715933] systemd[1]: Set hostname to <phil-XPS-15-7590>.
[ 2.903418] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 2.955367] systemd[1]: Created slice system-modprobe.slice.
[ 2.955581] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.955783] systemd[1]: Created slice User and Session Slice.
[ 2.955823] systemd[1]: Started ntp-systemd-netif.path.
[ 2.955874] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.956040] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.956089] systemd[1]: Reached target User and Group Name Lookups.
[ 2.956101] systemd[1]: Reached target Remote File Systems.
[ 2.956112] systemd[1]: Reached target Slices.
[ 2.956212] systemd[1]: Listening on Syslog Socket.
[ 2.956297] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.956345] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.956512] systemd[1]: Listening on Journal Audit Socket.
[ 2.956598] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.956691] systemd[1]: Listening on Journal Socket.
[ 2.956785] systemd[1]: Listening on udev Control Socket.
[ 2.956852] systemd[1]: Listening on udev Kernel Socket.
[ 2.957618] systemd[1]: Mounting Huge Pages File System...
[ 2.958387] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.959209] systemd[1]: Mounting Kernel Debug File System...
[ 2.960039] systemd[1]: Mounting Kernel Trace File System...
[ 2.961489] systemd[1]: Starting Journal Service...
[ 2.962415] systemd[1]: Starting Set the console keyboard layout...
[ 2.963342] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.964235] systemd[1]: Starting Load Kernel Module drm...
[ 2.965000] systemd[1]: Started Nameserver information manager.
[ 2.965122] systemd[1]: Reached target Network (Pre).
[ 2.965460] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.965491] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 2.966685] systemd[1]: Starting Load Kernel Modules...
[ 2.967411] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.968207] systemd[1]: Starting udev Coldplug all Devices...
[ 2.969363] systemd[1]: Starting Uncomplicated firewall...
[ 2.972939] systemd[1]: Mounted Huge Pages File System.
[ 2.973504] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.974045] systemd[1]: Mounted Kernel Debug File System.
[ 2.974612] systemd[1]: Mounted Kernel Trace File System.
[ 2.976830] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.979369] systemd[1]: Finished Uncomplicated firewall.
[ 2.983455] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 2.984815] systemd[1]: modprobe@drm.service: Succeeded.
[ 2.985239] systemd[1]: Finished Load Kernel Module drm.
[ 2.985879] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.986917] systemd[1]: Activating swap /swapfile...
[ 2.987457] lp: driver loaded but no devices found
[ 2.987705] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.987775] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 2.988772] systemd[1]: Starting Load/Save Random Seed...
[ 2.989841] systemd[1]: Starting Create System Users...
[ 2.990852] ppdev: user-space parallel port driver
[ 3.005829] systemd[1]: Finished Create System Users.
[ 3.008579] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.010420] systemd[1]: Finished Load/Save Random Seed.
[ 3.011282] systemd[1]: Finished Load Kernel Modules.
[ 3.012559] systemd[1]: Mounting FUSE Control File System...
[ 3.015767] systemd[1]: Mounting Kernel Configuration File System...
[ 3.016930] systemd[1]: Starting Apply Kernel Variables...
[ 3.017613] Adding 902668k swap on /swapfile. Priority:-2 extents:4 across:927244k SSFS
[ 3.018679] systemd[1]: Activated swap /swapfile.
[ 3.018933] systemd[1]: Mounted FUSE Control File System.
[ 3.019076] systemd[1]: Mounted Kernel Configuration File System.
[ 3.019162] systemd[1]: Reached target Swap.
[ 3.023014] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.023957] systemd[1]: Starting udev Kernel Device Manager...
[ 3.029865] systemd[1]: Finished Apply Kernel Variables.
[ 3.047845] systemd[1]: Finished Set the console keyboard layout.
[ 3.047943] systemd[1]: Reached target Local File Systems (Pre).
[ 3.049429] systemd[1]: Mounting Mount unit for bare, revision 5...
[ 3.050563] systemd[1]: Mounting Mount unit for core20, revision 1242...
[ 3.051919] loop0: detected capacity change from 0 to 8
[ 3.051957] systemd[1]: Mounting Mount unit for core20, revision 1270...
[ 3.053116] systemd[1]: Mounting Mount unit for gnome-3-38-2004, revision 87...
[ 3.054831] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1519...
[ 3.056325] systemd[1]: Mounting Mount unit for snap-store, revision 558...
[ 3.057764] systemd[1]: Mounting Mount unit for snapd, revision 14066...
[ 3.058669] systemd[1]: Mounting Mount unit for snapd, revision 14295...
[ 3.073516] systemd[1]: Started Journal Service.
[ 3.077752] loop1: detected capacity change from 0 to 126632
[ 3.080658] systemd-journald[335]: Received client request to flush runtime journal.
[ 3.130078] loop2: detected capacity change from 0 to 507712
[ 3.166356] loop3: detected capacity change from 0 to 111080
[ 3.206317] loop4: detected capacity change from 0 to 86368
[ 3.206360] input: Intel HID events as /devices/platform/INT33D5:00/input/input9
[ 3.208192] intel-hid INT33D5:00: platform supports 5 button array
[ 3.208227] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input10
[ 3.251477] loop5: detected capacity change from 0 to 126784
[ 3.277285] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 3.279718] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.290381] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.290699] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.292362] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 3.302570] loop6: detected capacity change from 0 to 88616
[ 3.343549] Intel(R) Wireless WiFi driver for Linux
[ 3.343827] iwlwifi 0000:3b:00.0: enabling device (0000 -> 0002)
[ 3.354600] loop7: detected capacity change from 0 to 133552
[ 3.372646] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 3.372650] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.372652] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.372653] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.372655] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.372656] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.393160] pstore: Using crash dump compression: deflate
[ 3.393175] pstore: Registered efi as persistent store backend
[ 3.395854] cryptd: max_cpu_qlen set to 1000
[ 3.404667] AVX2 version of gcm_enc/dec engaged.
[ 3.404670] AES CTR mode by8 optimization enabled
[ 3.405676] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 3.414430] iwlwifi 0000:3b:00.0: api flags index 2 larger than supported by driver
[ 3.414449] iwlwifi 0000:3b:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.22
[ 3.414738] iwlwifi 0000:3b:00.0: loaded firmware version 59.601f3a66.0 cc-a0-59.ucode op_mode iwlmvm
[ 3.455012] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 3.455079] intel_rapl_common: Found RAPL domain package
[ 3.455082] intel_rapl_common: Found RAPL domain dram
[ 3.468052] input: SYNA2393:00 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2393:00/0018:06CB:7A13.0001/input/input11
[ 3.468213] input: SYNA2393:00 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2393:00/0018:06CB:7A13.0001/input/input12
[ 3.468289] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA2393:00 06CB:7A13] on i2c-SYNA2393:00
[ 3.476432] input: Dell WMI hotkeys as /devices/platform/PNP0C14:05/wmi_bus/wmi_bus-PNP0C14:05/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14
[ 3.507905] MXM: GUID detected in BIOS
[ 3.507982] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20201113/nsarguments-61)
[ 3.508175] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20201113/nsarguments-61)
[ 3.510031] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 3.510038] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 3.510040] nouveau: detected PR support, will not use DSM
[ 3.510088] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[ 3.510271] checking generic (80000000 7e9000) vs hw (ec000000 1000000)
[ 3.510274] checking generic (80000000 7e9000) vs hw (c0000000 10000000)
[ 3.510275] checking generic (80000000 7e9000) vs hw (d0000000 2000000)
[ 3.510363] nouveau 0000:01:00.0: NVIDIA TU117 (167000a1)
[ 3.644313] checking generic (80000000 7e9000) vs hw (eb000000 1000000)
[ 3.644318] checking generic (80000000 7e9000) vs hw (80000000 10000000)
[ 3.644320] fb0: switching to inteldrmfb from EFI VGA
[ 3.644563] Console: switching to colour dummy device 80x25
[ 3.644629] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 3.645643] nouveau 0000:01:00.0: bios: version 90.17.1c.40.4b
[ 3.651418] iwlwifi 0000:3b:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[ 3.653135] nouveau 0000:01:00.0: pmu: firmware unavailable
[ 3.655605] intel_rapl_common: Found RAPL domain package
[ 3.655608] intel_rapl_common: Found RAPL domain core
[ 3.655610] intel_rapl_common: Found RAPL domain uncore
[ 3.655612] intel_rapl_common: Found RAPL domain dram
[ 3.655613] intel_rapl_common: Found RAPL domain psys
[ 3.662276] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5
[ 3.685878] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.687924] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 3.689124] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 3.696596] i915 0000:00:02.0: [drm] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
[ 3.718639] [TTM] Zone kernel: Available graphics memory: 8004012 KiB
[ 3.718641] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 3.718658] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB
[ 3.718662] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 3.718664] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 3.718666] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 3.718667] nouveau 0000:01:00.0: DRM: Pointer to TMDS table not found
[ 3.718668] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 3.719264] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 3.719620] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 3.719623] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
[ 3.748718] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 3.748822] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 3.861864] iwlwifi 0000:3b:00.0: base HW address: 50:eb:71:24:24:67
[ 3.877194] thermal thermal_zone13: failed to read out thermal zone (-61)
[ 3.882939] iwlwifi 0000:3b:00.0 wlp59s0: renamed from wlan0
[ 4.453103] Bluetooth: Core ver 2.22
[ 4.453124] NET: Registered protocol family 31
[ 4.453125] Bluetooth: HCI device and connection manager initialized
[ 4.453128] Bluetooth: HCI socket layer initialized
[ 4.453130] Bluetooth: L2CAP socket layer initialized
[ 4.453133] Bluetooth: SCO socket layer initialized
[ 4.606565] usbcore: registered new interface driver cdc_acm
[ 4.606568] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 4.609900] usbcore: registered new interface driver btusb
[ 4.610433] Bluetooth: hci0: Firmware revision 0.0 build 121 week 36 2020
[ 4.647824] intel_pstate: Turbo disabled by BIOS or unavailable on processor
[ 4.883748] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 4.909383] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.921596] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 4.923596] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 4.923735] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input16
[ 4.924186] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.925965] fbcon: i915drmfb (fb0) is primary device
[ 4.926098] Console: switching to colour frame buffer device 240x67
[ 4.926187] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 4.926635] vga_switcheroo: enabled
[ 5.045150] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 5.045167] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.045177] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 5.045185] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.045190] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.045196] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18
[ 5.045203] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 5.045209] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 5.155823] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 5.156109] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 5.156324] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 5.156558] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 5.156768] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 5.156981] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 6.623661] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 6.684837] audit: type=1400 audit(1639500766.272:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=931 comm="apparmor_parser"
[ 6.685091] audit: type=1400 audit(1639500766.272:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=926 comm="apparmor_parser"
[ 6.686125] audit: type=1400 audit(1639500766.276:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=927 comm="apparmor_parser"
[ 6.690021] audit: type=1400 audit(1639500766.280:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=923 comm="apparmor_parser"
[ 6.690384] audit: type=1400 audit(1639500766.280:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=929 comm="apparmor_parser"
[ 6.693991] audit: type=1400 audit(1639500766.280:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=935 comm="apparmor_parser"
[ 6.694007] audit: type=1400 audit(1639500766.280:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=935 comm="apparmor_parser"
[ 6.696492] audit: type=1400 audit(1639500766.288:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=936 comm="apparmor_parser"
[ 6.699951] audit: type=1400 audit(1639500766.288:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=938 comm="apparmor_parser"
[ 6.699967] audit: type=1400 audit(1639500766.288:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=938 comm="apparmor_parser"
[ 7.149932] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.149936] Bluetooth: BNEP filters: protocol multicast
[ 7.149943] Bluetooth: BNEP socket layer initialized
[ 7.173680] NET: Registered protocol family 38
[ 7.250346] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 7.937676] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 8.145638] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 8.602004] loop8: detected capacity change from 0 to 8
[ 10.344424] Bluetooth: RFCOMM TTY layer initialized
[ 10.344441] Bluetooth: RFCOMM socket layer initialized
[ 10.344451] Bluetooth: RFCOMM ver 1.11
[ 11.541468] wlp59s0: authenticate with e4:9e:12:1f:14:69
[ 11.548660] wlp59s0: send auth to e4:9e:12:1f:14:69 (try 1/3)
[ 11.589380] wlp59s0: authenticated
[ 11.593639] wlp59s0: associate with e4:9e:12:1f:14:69 (try 1/3)
[ 11.598451] wlp59s0: RX AssocResp from e4:9e:12:1f:14:69 (capab=0x1411 status=0 aid=3)
[ 11.616025] wlp59s0: associated
[ 11.664453] IPv6: ADDRCONF(NETDEV_CHANGE): wlp59s0: link becomes ready
[ 16.069569] input: MX Anywhere 2 Keyboard as /devices/virtual/misc/uhid/0005:046D:B01F.0002/input/input23
[ 16.069789] input: MX Anywhere 2 Mouse as /devices/virtual/misc/uhid/0005:046D:B01F.0002/input/input24
[ 16.069955] hid-generic 0005:046D:B01F.0002: input,hidraw1: BLUETOOTH HID v0.03 Keyboard [MX Anywhere 2] on 50:eb:71:24:24:6b
[ 48.379987] input: MX Anywhere 2 Keyboard as /devices/virtual/misc/uhid/0005:046D:B01F.0003/input/input26
[ 48.380103] input: MX Anywhere 2 Mouse as /devices/virtual/misc/uhid/0005:046D:B01F.0003/input/input27
[ 48.380463] hid-generic 0005:046D:B01F.0003: input,hidraw1: BLUETOOTH HID v0.03 Keyboard [MX Anywhere 2] on 50:eb:71:24:24:6b
[ 4145.123068] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 4145.277653] usb 1-2: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=35.04
[ 4145.277659] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4145.277662] usb 1-2: Product: USB2.0 Hub
[ 4145.277664] usb 1-2: Manufacturer: VIA Labs, Inc.
[ 4145.279403] hub 1-2:1.0: USB hub found
[ 4145.280321] hub 1-2:1.0: 4 ports detected
[ 4145.443294] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 4145.569669] usb 2-2: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=35.05
[ 4145.569676] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4145.569678] usb 2-2: Product: USB3.0 Hub
[ 4145.569680] usb 2-2: Manufacturer: VIA Labs, Inc.
[ 4145.586983] hub 2-2:1.0: USB hub found
[ 4145.589378] hub 2-2:1.0: 4 ports detected
[ 4145.647005] usb 1-2.2: new high-speed USB device number 5 using xhci_hcd
[ 4145.770140] usb 1-2.2: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=35.04
[ 4145.770147] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4145.770149] usb 1-2.2: Product: USB2.0 Hub
[ 4145.770151] usb 1-2.2: Manufacturer: VIA Labs, Inc.
[ 4145.771929] hub 1-2.2:1.0: USB hub found
[ 4145.773227] hub 1-2.2:1.0: 4 ports detected
[ 4145.879008] usb 1-2.4: new high-speed USB device number 6 using xhci_hcd
[ 4146.009278] usb 1-2.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[ 4146.009285] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4146.009287] usb 1-2.4: Product: USB2.0 Hub
[ 4146.009289] usb 1-2.4: Manufacturer: GenesysLogic
[ 4146.012372] hub 1-2.4:1.0: USB hub found
[ 4146.014076] hub 1-2.4:1.0: 4 ports detected
[ 4146.139123] usb 2-2.2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 4146.265533] usb 2-2.2: New USB device found, idVendor=2109, idProduct=0813, bcdDevice=35.05
[ 4146.265540] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4146.265542] usb 2-2.2: Product: USB3.0 Hub
[ 4146.265544] usb 2-2.2: Manufacturer: VIA Labs, Inc.
[ 4146.282673] hub 2-2.2:1.0: USB hub found
[ 4146.285050] hub 2-2.2:1.0: 4 ports detected
[ 4147.121894] usb 1-2.4-port1: Cannot enable. Maybe the USB cable is bad?
[ 4147.219361] usb 2-2.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 4147.243576] usb 2-2.4: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.24
[ 4147.243583] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4147.243585] usb 2-2.4: Product: USB3.0 Hub
[ 4147.243587] usb 2-2.4: Manufacturer: GenesysLogic
[ 4147.245925] hub 2-2.4:1.0: USB hub found
[ 4147.246229] hub 2-2.4:1.0: 4 ports detected
[ 4148.035974] usb 2-2.1: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
[ 4148.056687] usb 2-2.1: New USB device found, idVendor=17e9, idProduct=436e, bcdDevice=31.34
[ 4148.056693] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4148.056695] usb 2-2.1: Product: Dell D3100 USB3.0 Dock
[ 4148.056697] usb 2-2.1: Manufacturer: DisplayLink
[ 4148.056699] usb 2-2.1: SerialNumber: 2001050500B
[ 4148.135454] usb 2-2.4.1: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
[ 4148.156261] usb 2-2.4.1: New USB device found, idVendor=13fe, idProduct=5000, bcdDevice= 1.10
[ 4148.156267] usb 2-2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4148.156270] usb 2-2.4.1: Product: USB DISK 3.0
[ 4148.156272] usb 2-2.4.1: Manufacturer:
[ 4148.156273] usb 2-2.4.1: SerialNumber: 070726FB07442A60
[ 4148.311164] usb 2-2.3: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd
[ 4148.331810] usb 2-2.3: New USB device found, idVendor=17e9, idProduct=436e, bcdDevice=31.34
[ 4148.331819] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4148.331823] usb 2-2.3: Product: Dell D3100 USB3.0 Dock
[ 4148.331826] usb 2-2.3: Manufacturer: DisplayLink
[ 4148.331829] usb 2-2.3: SerialNumber: 2001050500
[ 4148.515143] hub 1-2.4:1.0: hub_ext_port_status failed (err = -71)
[ 4148.515149] hub_port_connect: 27 callbacks suppressed
[ 4148.515151] usb 1-2.4-port1: connect-debounce failed
[ 4148.515272] hub 1-2.4:1.0: hub_ext_port_status failed (err = -71)
[ 4148.515371] hub 1-2.4:1.0: hub_ext_port_status failed (err = -71)
[ 4148.515465] hub 1-2.4:1.0: hub_ext_port_status failed (err = -71)
[ 4148.515563] hub 1-2.4:1.0: hub_ext_port_status failed (err = -71)
[ 4148.515760] usb 1-2.4: Failed to suspend device, error -71
[ 4148.728630] usb 1-2.4: USB disconnect, device number 6
[ 4148.942706] mc: Linux media interface: v0.10
[ 4148.948398] usbcore: registered new interface driver cdc_ether
[ 4148.963170] usb 1-2.4: new high-speed USB device number 9 using xhci_hcd
[ 4148.982451] cdc_ncm 2-2.3:1.5: MAC-Address: 9c:eb:e8:f2:84:a5
[ 4148.982456] cdc_ncm 2-2.3:1.5: setting rx_max = 16384
[ 4148.982597] cdc_ncm 2-2.3:1.5: setting tx_max = 16384
[ 4148.982839] cdc_ncm 2-2.3:1.5 eth0: register 'cdc_ncm' at usb-0000:00:14.0-2.3, CDC NCM, 9c:eb:e8:f2:84:a5
[ 4148.987685] usbcore: registered new interface driver cdc_ncm
[ 4148.990325] usbcore: registered new interface driver cdc_wdm
[ 4149.058685] usb 2-2.3: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
[ 4149.058690] usb 2-2.3: [15] FU [Dell USB Audio Playback Volume] ch = 6, val = -8176/0/16
[ 4149.059281] usb 2-2.3: Warning! Unlikely big volume range (=767), cval->res is probably wrong.
[ 4149.059284] usb 2-2.3: [12] FU [Mic Capture Volume] ch = 2, val = -4592/7680/16
[ 4149.059520] usbcore: registered new interface driver snd-usb-audio
[ 4149.059577] usbcore: registered new interface driver cdc_mbim
[ 4149.073499] cdc_ncm 2-2.3:1.5 enx9cebe8f284a5: renamed from eth0
[ 4149.087805] usb 1-2.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
[ 4149.087811] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4149.087814] usb 1-2.4: Product: USB2.0 Hub
[ 4149.087815] usb 1-2.4: Manufacturer: GenesysLogic
[ 4149.090938] hub 1-2.4:1.0: USB hub found
[ 4149.092594] hub 1-2.4:1.0: 4 ports detected
[ 4149.499630] usb-storage 2-2.4.1:1.0: USB Mass Storage device detected
[ 4149.499999] scsi host1: usb-storage 2-2.4.1:1.0
[ 4149.500125] usbcore: registered new interface driver usb-storage
[ 4149.502155] usbcore: registered new interface driver uas
[ 4150.071878] cdc_ncm 2-2.3:1.5 enx9cebe8f284a5: 1000 mbit/s downlink 1000 mbit/s uplink
[ 4150.087894] IPv6: ADDRCONF(NETDEV_CHANGE): enx9cebe8f284a5: link becomes ready
[ 4150.511996] scsi 1:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 4
[ 4150.512365] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4150.512842] sd 1:0:0:0: [sda] 30949376 512-byte logical blocks: (15.8 GB/14.8 GiB)
[ 4150.513054] sd 1:0:0:0: [sda] Write Protect is off
[ 4150.513057] sd 1:0:0:0: [sda] Mode Sense: 45 00 00 00
[ 4150.513194] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4150.641737] sda: sda1 sda2 sda3
[ 4150.659999] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 4160.964763] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 4165.965318] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4165.966362] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4165.967034] ISO 9660 Extensions: RRIP_1991A
[ 4523.343461] sda: detected capacity change from 30949376 to 0
[ 4526.902690] usb 1-2: USB disconnect, device number 4
[ 4526.902695] usb 1-2.2: USB disconnect, device number 5
[ 4526.903980] usb 1-2.4: USB disconnect, device number 9
[ 4527.554680] usb 2-2: USB disconnect, device number 2
[ 4527.554685] usb 2-2.1: USB disconnect, device number 5
[ 4527.555713] usb 2-2.2: USB disconnect, device number 3
[ 4527.556709] usb 2-2.3: USB disconnect, device number 7
[ 4527.557332] cdc_ncm 2-2.3:1.5 enx9cebe8f284a5: unregister 'cdc_ncm' usb-0000:00:14.0-2.3, CDC NCM
[ 4527.595647] usb 2-2.4: USB disconnect, device number 4
[ 4527.595654] usb 2-2.4.1: USB disconnect, device number 6
phil@phil-XPS-15-7590:~$ phil@phil-XPS-15-7590:~$ sudo systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @9.323s
└─multi-user.target @9.323s
└─teamviewerd.service @9.264s +58ms
└─network-online.target @9.248s
└─NetworkManager-wait-online.service @4.670s +4.576s
└─NetworkManager.service @4.538s +130ms
└─dbus.service @4.531s
└─basic.target @4.510s
└─sockets.target @4.510s
└─snapd.socket @4.508s +1ms
└─sysinit.target @4.502s
└─snapd.apparmor.service @4.447s +54ms
└─apparmor.service @4.155s +290ms
└─local-fs.target @4.153s
└─run-user-1000-gvfs.mount @8.140s
└─run-user-1000.mount @7.152s
└─local-fs-pre.target @568ms
└─keyboard-setup.service @483ms +85ms
└─systemd-journald.socket @477ms
└─system.slice @474ms
└─-.slice @474ms
phil@phil-XPS-15-7590:~$ phil@phil-XPS-15-7590:~$ sudo systemd-analyze blame
4.576s NetworkManager-wait-online.service
3.540s dev-nvme0n1p2.device
1.936s snapd.service
530ms mozillavpn.service
516ms lightdm.service
511ms plymouth-quit-wait.service
480ms systemd-logind.service
385ms snap-gtk\x2dcommon\x2dthemes-1519.mount
381ms snap-snapd-14295.mount
376ms blueman-mechanism.service
340ms dev-loop2.device
330ms apport-autoreport.service
326ms dev-loop0.device
320ms upower.service
312ms snap-core20-1270.mount
310ms systemd-resolved.service
305ms dev-loop1.device
300ms dev-loop3.device
290ms apparmor.service
263ms dev-loop4.device
240ms snap-snapd-14066.mount
226ms tlp.service
212ms udisks2.service
212ms accounts-daemon.service
211ms snapd.seeded.service
202ms dev-loop5.device
198ms snap-snap\x2dstore-558.mount
187ms networkd-dispatcher.service
174ms ua-timer.service
166ms bolt.service
162ms lm-sensors.service
156ms snap-bare-5.mount
154ms dev-loop6.device
153ms snap-gnome\x2d3\x2d38\x2d2004-87.mount
145ms systemd-udev-trigger.service
142ms bluetooth.service
141ms systemd-journal-flush.service
135ms avahi-daemon.service
131ms user@1000.service
131ms plymouth-read-write.service
130ms NetworkManager.service
123ms polkit.service
116ms snap-core20-1242.mount
115ms systemd-backlight@leds:dell::kbd_backlight.service
112ms systemd-journald.service
96ms apport.service
93ms systemd-tmpfiles-setup.service
90ms thermald.service
89ms geoclue.service
87ms wpa_supplicant.service
86ms systemd-backlight@backlight:intel_backlight.service
85ms keyboard-setup.service
82ms systemd-udevd.service
80ms ModemManager.service
79ms systemd-fsck@dev-disk-by\x2duuid-3f93d39a\x2d21ab\x2d4fa4\x2d812b\x2d9d64cbf895e3.service
75ms alsa-restore.service
71ms systemd-fsck@dev-disk-by\x2duuid-FAEB\x2d0C85.service
66ms dev-loop7.device
58ms teamviewerd.service
56ms resolvconf-pull-resolved.service
56ms grub-common.service
54ms snapd.apparmor.service
52ms secureboot-db.service
51ms gpu-manager.service
50ms rsyslog.service
46ms binfmt-support.service
44ms systemd-modules-load.service
43ms e2scrub_reap.service
41ms kerneloops.service
38ms ntp.service
34ms hddtemp.service
33ms colord.service
31ms swapfile.swap
30ms systemd-tmpfiles-clean.service
29ms home.mount
28ms proc-sys-fs-binfmt_misc.mount
24ms pppd-dns.service
22ms systemd-update-utmp.service
21ms systemd-random-seed.service
20ms modprobe@drm.service
20ms boot-efi.mount
19ms plymouth-start.service
18ms systemd-remount-fs.service
16ms console-setup.service
15ms grub-initrd-fallback.service
15ms systemd-sysusers.service
15ms user-runtime-dir@1000.service
15ms dev-hugepages.mount
15ms dev-mqueue.mount
14ms sys-kernel-debug.mount
14ms sys-kernel-tracing.mount
14ms systemd-tmpfiles-setup-dev.service
13ms systemd-update-utmp-runlevel.service
13ms systemd-user-sessions.service
13ms kmod-static-nodes.service
12ms systemd-sysctl.service
10ms ufw.service
9ms setvtrgb.service
6ms sys-fs-fuse-connections.mount
5ms rtkit-daemon.service
3ms sys-kernel-config.mount
1ms snapd.socket
phil@phil-XPS-15-7590:~$ phil@phil-XPS-15-7590:~$ sudo systemd-analyze
Startup finished in 10.593s (firmware) + 5.530s (loader) + 2.466s (kernel) + 9.607s (userspace) = 28.198s
graphical.target reached after 9.323s in userspace
phil@phil-XPS-15-7590:~$ phil@phil-XPS-15-7590:~$ dpkg -l | grep -v ^ii
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom Version Architecture Description
+++-==========================================-=====================================-============-========================================================================================================================
rc language-pack-en-base 1:20.04+20210802 all translations for language English
rc language-pack-gnome-en-base 1:20.04+20210802 all GNOME translations for language English
rc mariadb-common 1:10.3.32-0ubuntu0.20.04.1 all MariaDB common metapackage
rc sgt-launcher 0.2.5-0ubuntu1 all launcher for sgt-puzzles collection
rc systemd-timesyncd 245.4-4ubuntu3.13 amd64 minimalistic service to synchronize local time with NTP servers
phil@phil-XPS-15-7590:~$ phil@phil-XPS-15-7590:~$ snap list --all
Nom Version Révision Suivi Éditeur Notes
bare 1.0 5 latest/stable canonical✓ base
core20 20211115 1242 latest/stable canonical✓ base,désactivé
core20 20211129 1270 latest/stable canonical✓ base
gnome-3-38-2004 0+git.cd626d1 87 latest/stable canonical✓ -
gtk-common-themes 0.1-59-g7bca6ae 1519 latest/stable canonical✓ -
snap-store 3.38.0-66-gbd5b8f7 558 latest/stable/… canonical✓ -
snapd 2.53.2 14066 latest/stable canonical✓ snapd,désactivé
snapd 2.53.4 14295 latest/stable canonical✓ snapd
phil@phil-XPS-15-7590:~$ phil@phil-XPS-15-7590:~$ ls -l /var/crash
total 6252
-rw-r----- 1 phil whoopsie 2206952 déc. 14 17:24 _usr_bin_xfce4-color-settings.1000.crash
-rw-r--r-- 1 phil whoopsie 0 déc. 14 17:24 _usr_bin_xfce4-color-settings.1000.upload
-rw------- 1 whoopsie whoopsie 37 déc. 14 17:24 _usr_bin_xfce4-color-settings.1000.uploaded
-rw-r----- 1 root whoopsie 4182573 déc. 14 17:42 _usr_lib_xorg_Xorg.0.crash
-rw-r--r-- 1 root whoopsie 0 déc. 14 17:42 _usr_lib_xorg_Xorg.0.upload
-rw------- 1 whoopsie whoopsie 37 déc. 14 17:43 _usr_lib_xorg_Xorg.0.uploaded
phil@phil-XPS-15-7590:~$ phil@phil-XPS-15-7590:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 4K 1 loop /snap/bare/5
loop1 7:1 0 61,9M 1 loop /snap/core20/1242
loop2 7:2 0 247,9M 1 loop /snap/gnome-3-38-2004/87
loop3 7:3 0 54,2M 1 loop /snap/snap-store/558
loop4 7:4 0 42,2M 1 loop /snap/snapd/14066
loop5 7:5 0 61,9M 1 loop /snap/core20/1270
loop6 7:6 0 43,3M 1 loop /snap/snapd/14295
loop7 7:7 0 65,2M 1 loop /snap/gtk-common-themes/1519
nvme0n1 259:0 0 477G 0 disk
├─nvme0n1p1 259:1 0 512M 0 part /boot/efi
├─nvme0n1p2 259:2 0 18,6G 0 part /
└─nvme0n1p3 259:3 0 457,8G 0 part /home
phil@phil-XPS-15-7590:~$ Voici le boot-info généré :
Boot-info
Modération : merci de respecter les règles du forum : les doublons sont interdits.
Dernière modification par cqfd93 (Le 14/12/2021, à 21:54)
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#2 Le 15/12/2021, à 11:05
- malbo
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Bonjour,
Je colle ci-dessous le contenu du Boot-info dont tu as donné le lien dans ton post #1 :
boot-info-4ppa133 [20211214_1942]
============================== Boot Info Summary ===============================
=> No boot loader is installed in the MBR of /dev/nvme0n1.
nvme0n1p1: _____________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/BOOT/fbx64.efi /efi/BOOT/mmx64.efi
/efi/ubuntu/fwupdx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg
nvme0n1p2: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
nvme0n1p3: _____________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
================================ 1 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 20.04.3 LTS CurrentSession on nvme0n1p2
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.11.0-41-generic root=UUID=1244cda0-5172-41b4-be2b-558bc3076887 ro quiet splash vt.handoff=7
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.
efibootmgr -v
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,0000
Boot0000* Linux Firmware Updater HD(1,GPT,9095cad6-df67-4bc9-8a00-bab9ad366552,0x800,0x100000)/File(\EFI\ubuntu\fwupdx64.efi)
Boot0001 Windows Boot Manager HD(2,GPT,d0e70d43-fcb6-4f06-a50a-574d532bcd21,0xc8800,0x32000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a................
Boot0002* ubuntu HD(1,GPT,9095cad6-df67-4bc9-8a00-bab9ad366552,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
85fa9d77b929ec4231aba29476574eb6 nvme0n1p1/BOOT/fbx64.efi
469e608783843a701d172242f016c79c nvme0n1p1/BOOT/mmx64.efi
a18c8a2edab53b8091454e9f7460f3bd nvme0n1p1/ubuntu/fwupdx64.efi
fa1bf1a7f90a852abe0bdbd089b7f1b0 nvme0n1p1/ubuntu/grubx64.efi
469e608783843a701d172242f016c79c nvme0n1p1/ubuntu/mmx64.efi
728124f6ec8e22fbdbe7034812c81b95 nvme0n1p1/ubuntu/shimx64.efi
728124f6ec8e22fbdbe7034812c81b95 nvme0n1p1/BOOT/BOOTX64.efi
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
nvme0n1 : is-GPT, no-BIOSboot, has---ESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
nvme0n1p2 : is-os, 64, apt-get, signed grub-pc grub-efi , grub2, grub-install, grubenv-ok, update-grub, not-far
nvme0n1p1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
nvme0n1p3 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
nvme0n1p2 : isnotESP, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p1 : is---ESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
nvme0n1p3 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
nvme0n1p2 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, nvme0n1
nvme0n1p1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
nvme0n1p3 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, nvme0n1
fdisk -l (filtered): ___________________________________________________________
Disk nvme0n1: 476.96 GiB, 512110190592 bytes, 1000215216 sectors
Disk identifier: CC1CE30B-7CC2-42D2-80B3-08FF10C7BA80
Start End Sectors Size Type
nvme0n1p1 2048 1050623 1048576 512M EFI System
nvme0n1p2 1050624 40113123 39062500 18.6G Linux filesystem
nvme0n1p3 40114176 1000214527 960100352 457.8G Linux filesystem
parted -lm (filtered): _________________________________________________________
nvme0n1:512GB:nvme:512:512:gpt:PC601 NVMe SK hynix 512GB:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:20.5GB:20.0GB:ext4::;
3:20.5GB:512GB:492GB:ext4::;
Free space (filtered): _________________________________________________________
nvme0n1:488386MiB:nvme:512:512:gpt:PC601 NVMe SK hynix 512GB:;
1:0.02MiB:1.00MiB:0.98MiB:free;
1:19586MiB:19587MiB:0.51MiB:free;
1:488386MiB:488386MiB:0.32MiB:free;
gdisk (filtered): ______________________________________________________________
MBR: protective
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/nvme0n1: 1000215216 sectors, 476.9 GiB
Disk identifier (GUID): CC1CE30B-7CC2-42D2-80B3-08FF10C7BA80
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 1000215182
Partitions will be aligned on 2048-sector boundaries
Total free space is 3721 sectors (1.8 MiB)
Number Start (sector) End (sector) Size Code Name
1 2048 1050623 512.0 MiB EF00 EFI System Partition
2 1050624 40113123 18.6 GiB 8300
3 40114176 1000214527 457.8 GiB 8300
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
nvme0n1
├─nvme0n1p1 vfat FAEB-0C85 9095cad6-df67-4bc9-8a00-bab9ad366552 EFI System Partition
├─nvme0n1p2 ext4 1244cda0-5172-41b4-be2b-558bc3076887 44741cc5-d4da-48ea-8f41-8e41bb2343c8
└─nvme0n1p3 ext4 3f93d39a-21ab-4fa4-812b-9d64cbf895e3 bae78aa6-b36c-41f3-b85a-5708a162a92c
df (filtered): _________________________________________________________________
Avail Use% Mounted on
nvme0n1p2 7.8G 52% /
nvme0n1p3 184.7G 54% /home
Mount options: __________________________________________________________________
nvme0n1p2 rw,relatime,errors=remount-ro
nvme0n1p3 rw,relatime
=================== nvme0n1p1/efi/ubuntu/grub.cfg (filtered) ===================
search.fs_uuid 1244cda0-5172-41b4-be2b-558bc3076887 root
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
=================== nvme0n1p2/boot/grub/grub.cfg (filtered) ====================
Ubuntu 1244cda0-5172-41b4-be2b-558bc3076887
Ubuntu, avec Linux 5.11.0-41-generic 1244cda0-5172-41b4-be2b-558bc3076887
Ubuntu, avec Linux 5.11.0-27-generic 1244cda0-5172-41b4-be2b-558bc3076887
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###
======================== nvme0n1p2/etc/fstab (filtered) ========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p2 during installation
UUID=1244cda0-5172-41b4-be2b-558bc3076887 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=FAEB-0C85 /boot/efi vfat umask=0077 0 1
# /home was on /dev/nvme0n1p3 during installation
UUID=3f93d39a-21ab-4fa4-812b-9d64cbf895e3 /home ext4 defaults 0 2
/swapfile none swap sw 0 0
==================== nvme0n1p2/etc/default/grub (filtered) =====================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
================= nvme0n1p2: Location of files loaded by Grub ==================
GiB - GB File Fragment(s)
16,960674286 = 18,211385344 boot/grub/grub.cfg 3
7,941600800 = 8,527228928 boot/vmlinuz 1
3,774410248 = 4,052742144 boot/vmlinuz-5.11.0-27-generic 2
7,941600800 = 8,527228928 boot/vmlinuz-5.11.0-41-generic 1
3,774410248 = 4,052742144 boot/vmlinuz.old 2
15,840690613 = 17,008812032 boot/initrd.img 2
12,003471375 = 12,888629248 boot/initrd.img-5.11.0-27-generic 1
15,840690613 = 17,008812032 boot/initrd.img-5.11.0-41-generic 2
12,003471375 = 12,888629248 boot/initrd.img.old 1
=================== nvme0n1p2: ls -l /etc/grub.d/ (filtered) ===================
-rwxr-xr-x 1 root root 18151 août 12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 août 12 11:18 10_linux_zfs
-rwxr-xr-x 1 root root 12894 août 12 11:18 20_linux_xen
-rwxr-xr-x 1 root root 12059 août 12 11:18 30_os-prober
-rwxr-xr-x 1 root root 1424 août 12 11:18 30_uefi-firmware
-rwxr-xr-x 1 root root 214 août 12 11:18 40_custom
-rwxr-xr-x 1 root root 216 août 12 11:18 41_custom
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of
nvme0n1p2,
using the following options: nvme0n1p1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the L'OS actuellement utilisé - Ubuntu 20.04.3 LTS CurrentSession entry (nvme0n1p1/efi/****/shim****.efi (**** will be updated in the final message) file) !Je n'ai pas grand chose à dire sur le Boot-info.
Ce qui m'intéresse, c'est cet extrait du dmesg :
[ 16.069789] input: MX Anywhere 2 Mouse as /devices/virtual/misc/uhid/0005:046D:B01F.0002/input/input24
[ 16.069955] hid-generic 0005:046D:B01F.0002: input,hidraw1: BLUETOOTH HID v0.03 Keyboard [MX Anywhere 2] on 50:eb:71:24:24:6b
[ 48.379987] input: MX Anywhere 2 Keyboard as /devices/virtual/misc/uhid/0005:046D:B01F.0003/input/input26
[ 48.380103] input: MX Anywhere 2 Mouse as /devices/virtual/misc/uhid/0005:046D:B01F.0003/input/input27
[ 48.380463] hid-generic 0005:046D:B01F.0003: input,hidraw1: BLUETOOTH HID v0.03 Keyboard [MX Anywhere 2] on 50:eb:71:24:24:6bQu'on peut comparer avec cet extrait d'un vieux post de toi :
[ 10.120809] hid-generic 0005:046D:B01F.0002: input,hidraw1: BLUETOOTH HID v0.03 Keyboard [MX Anywhere 2] on 50:eb:71:24:24:6b
[ 43.309325] hid-generic 0005:046D:B01F.0003: input,hidraw1: BLUETOOTH HID v0.03 Keyboard [MX Anywhere 2] on 50:eb:71:24:24:6bC'est ta souris bluetooth (Logitech MX Anywhere 2) qui traine.
Dernière modification par malbo (Le 15/12/2021, à 11:18)
Hors ligne
#3 Le 15/12/2021, à 11:12
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Bonjour Malbo,
Intéressant, et merci de m'aider à interpréter le boot-info, j'ai du mal avec ces messages.
J'ai effectivement des soucis avec la souris Bluetooth, mais après le démarrage, elle devient inopérante pendant une dizaine de secondes après le premier clic ou mouvement. Soucis non résolus depuis ce vieux post, je m'étais résigné...
Je vais faire un essai sans elle ou avec le dongle fourni avec.
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#4 Le 15/12/2021, à 11:26
- FrancisFDZ
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Bonjour,
En ce qui concerne la souris, je pense qu'il vaut mieux s'en séparer : on trouve des souris filaires aux environs de 7 € et des sans fil à moins de 10 €.(vu chez LDLC, mais aussi chez Amazon et ailleurs)
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#5 Le 15/12/2021, à 11:48
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Je viens de redémarrer avec le dongle USB. Pas de blocage de la souris comme expliqué au post # et dans le vieux fil, donc souci de Bluetooth avec la Logitech, depuis le début.
J'ai gagné à peu près 5 secondes au démarrage...
Maintenant, je me penche sur les erreurs trouvées dans le boot-info puisqu'il parle d'une "réparation suggérée", et des erreurs trouvées ici et là.
@FrancisFDZ. Cette souris m'est très utile pour travailler sur deux voire trois ordinateurs en même temps. Hors de question de la bazarder (vu son prix et ses qualités) si je sais ses défauts et arrive à les résoudre ou corriger (avec votre aide si nécessaire).
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#6 Le 15/12/2021, à 11:48
- geole
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Bonjour.
Vu aussi.
48.379987] input: MX Anywhere 2 Keyboard as /devices/virtual/misc/uhid/0005:046D:B01F.0003/input/input26Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#7 Le 15/12/2021, à 11:50
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
geole a écrit :
Bonjour.
Vu aussi.48.379987] input: MX Anywhere 2 Keyboard as /devices/virtual/misc/uhid/0005:046D:B01F.0003/input/input26
Oui, mais comment l'interpréter ?
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#8 Le 15/12/2021, à 12:04
- xubu1957
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Bonjour,
Tu as toujours les hubs en cascade ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#9 Le 15/12/2021, à 12:07
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Bonjour Xubu,
J'ai débranché le DisplayLink Dell (je ne sais plus comment vous l'appellez) pour mieux cerner le problème.
Donc actuellement, voici le retour de commande :
phil@phil-XPS-15-7590:~$ lsusb | sort ; echo; lsusb -t
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 8087:0029 Intel Corp.
Bus 001 Device 004: ID 27c6:5395 Shenzhen Goodix Technology Co.,Ltd. Fingerprint Reader
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 10000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
|__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 4: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 4, If 0, Class=Communications, Driver=, 12M
|__ Port 7: Dev 4, If 1, Class=CDC Data, Driver=, 12M
phil@phil-XPS-15-7590:~$ XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#10 Le 15/12/2021, à 12:10
- xubu1957
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Je vois :
ID 046d:c52b Logitech, Inc. Unifying ReceiverDans > ce fil
Le 09/08/2021, Nuliel a écrit :
Bonjour,
En fait unifying c'est du bluetooth à la sauce Logitech (comprendre un nouveau truc propriétaire), donc ça respecte pas le standard bluetooth, donc je pense pas qu'on pourra appairer avec bluetoothctl ou équivalent.
(...)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#11 Le 15/12/2021, à 12:14
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
D'accord, je comprends mieux le problème, déjà levé en 2020 mais pas solutionné de mon côté.
Je viens de me prendre la tête en parallèle avec le Customer Service Logitech, ils affirment ne pas supporter Linux et donc pas Ubuntu, mais vendent des souris ou dispositifs compatibles Linux... :-(
Mais là, je suis maintenant en connexion sur la souris avec le dongle USB, donc plus de BT, théoriquement, je devrais être "meilleurs" ?
Non ?
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#12 Le 15/12/2021, à 12:21
- xubu1957
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Je trouve > qastack.fr/ubuntu/113984/is-logitechs-unifying-receiver-supported
La Doc solaar
Je ne saurais pas aider plus.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#13 Le 15/12/2021, à 12:21
- geole
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Phil17 a écrit :
Maintenant, je me penche sur les erreurs trouvées dans le boot-info puisqu'il parle d'une "réparation suggérée",
C'est inutile, ton ordinateur boote..
pour les éventuelles erreurs
journalctl --no-pager -b -p errTu pourras tenter d'ajouter au démarrage temporairement cette option debug ignore_loglevel
afin de voir si la trace dmesg est plus parlante
voir paragraphe 7.3.1 de https://doc.ubuntu-fr.org/kernel
Dernière modification par geole (Le 15/12/2021, à 12:26)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#14 Le 15/12/2021, à 12:33
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Je vais essayer de répondre à Xubu puis geole.
@Xubu, tu parles du récepteur "Unifying", est-ce ce que j’appelle le dongle USB ? Pour moi, cette souris a trois canaux dont deux en Bluetooth et un dernier avec le dongle USB, ce dernier ne serait pas conforme non plus ? Pourtant, il semble que j'ai moins de souci puisque la souris ne gèle plus au redémarrage comme auparavant en utilisant cet adaptateur.
@geole, voici le retour de ta commande, incompréhensible pour moi, hélas.
phil@phil-XPS-15-7590:~$ journalctl --no-pager -b -p err
-- Logs begin at Wed 2021-12-01 12:17:23 CET, end at Wed 2021-12-15 11:17:01 CET. --
déc. 15 10:20:12 phil-XPS-15-7590 kernel: psmouse serio1: synaptics: Unable to query device: -5
déc. 15 10:20:12 phil-XPS-15-7590 systemd-udevd[368]: /etc/udev/rules.d/40-libsane.rules:26: GOTO="libsane_rules_end" has no matching label, ignoring
déc. 15 10:20:12 phil-XPS-15-7590 systemd-udevd[368]: /etc/udev/rules.d/S99-2000S1.rules:26: GOTO="libsane_rules_end" has no matching label, ignoring
déc. 15 10:20:14 phil-XPS-15-7590 ntpd[911]: error resolving pool 0.ubuntu.pool.ntp.org: Temporary failure in name resolution (-3)
déc. 15 10:20:15 phil-XPS-15-7590 ntpd[911]: error resolving pool 1.ubuntu.pool.ntp.org: Temporary failure in name resolution (-3)
déc. 15 10:20:16 phil-XPS-15-7590 ntpd[911]: error resolving pool 2.ubuntu.pool.ntp.org: Temporary failure in name resolution (-3)
déc. 15 10:20:17 phil-XPS-15-7590 ntpd[911]: error resolving pool 3.ubuntu.pool.ntp.org: Temporary failure in name resolution (-3)
déc. 15 10:20:19 phil-XPS-15-7590 ntpd[911]: bind(24) AF_INET6 fe80::767c:1451:8b3d:8410%2#123 flags 0x11 failed: Cannot assign requested address
déc. 15 10:20:19 phil-XPS-15-7590 ntpd[911]: unable to create socket on wlp59s0 (5) for fe80::767c:1451:8b3d:8410%2#123
déc. 15 10:20:21 phil-XPS-15-7590 ntpd[911]: bind(24) AF_INET6 2a01:e34:ef7f:5b50:9077:e288:b61e:828d#123 flags 0x11 failed: Cannot assign requested address
déc. 15 10:20:21 phil-XPS-15-7590 ntpd[911]: unable to create socket on wlp59s0 (6) for 2a01:e34:ef7f:5b50:9077:e288:b61e:828d#123
déc. 15 10:20:21 phil-XPS-15-7590 ntpd[911]: bind(24) AF_INET6 2a01:e34:ef7f:5b50:4723:1026:a24e:715d#123 flags 0x11 failed: Cannot assign requested address
déc. 15 10:20:21 phil-XPS-15-7590 ntpd[911]: unable to create socket on wlp59s0 (7) for 2a01:e34:ef7f:5b50:4723:1026:a24e:715d#123
phil@phil-XPS-15-7590:~$ XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#15 Le 15/12/2021, à 12:43
- xubu1957
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Je viens de survoler wikipedia/Récepteur_Logitech_Unifying
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#16 Le 15/12/2021, à 13:00
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Merci, je vais le lire est tenter de comprendre.
Je viens d'installer solaar, je vais redémarrer avec un peu d'inquiétude car il m'a demandé de choisir entre deux gestionnaires graphiques... j'ai choisi en aveugle lightdm ne sachant pas lequel est installé sur ma machine...
Je vais redémarrer pour vérifier, tester.
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#17 Le 15/12/2021, à 13:19
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Redémarré.
Je constate que le logiciel solaar ne fonctionne QUE sur le dongle USB, pas sur la liaison bluetooth. J'aurai appris quelque chose.
Pour moi, solaar permet d'obtenir l'information de niveau de batterie, de modifier la résolution de la roulette.
Comme la souris fonctionnait sans problème sans ce logiciel, c'est un "plus" mais qui ne résoud pas le souci essentiellement Bluetooth car la latence ou le "freeze" en utilisation Bluetooth existe toujours.
Mais j'ai compris des choses. Merci.
Merci aussi à tous les aidants et je n'oublie pas la remarque de François concernant l'usage d'une souris filaire (désolé, je ne puis) ou d'une souris réellement compatible Linux, je vais tester avec le Huawei en dualboot de ma femme qui semble n'avoir aucun problème.
Reste à comprendre pourquoi le boot met 25 secondes(+) avec uniquement le logo Dell, et surtout trouver pourquoi, lors de l'extinction, j'ai l'apparition du logo Xubuntu figé pendant une bonne vingtaine de secondes avant extinction, ce qui me chagrine à tel point que j'attends que l'ordinateur s'éteingne réellement, ayant déjà vu le cas ou il restait allumé plus d'une minute.
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#18 Le 15/12/2021, à 13:20
- FrancisFDZ
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Phil17 a écrit :
@FrancisFDZ. Cette souris m'est très utile pour travailler sur deux voire trois ordinateurs en même temps. Hors de question de la bazarder (vu son prix et ses qualités) si je sais ses défauts et arrive à les résoudre ou corriger (avec votre aide si nécessaire).
No problem ! Et c'est dans l'air du temps : tant que ça marche, pourquoi jeter ?
-- On peut avoir des raisons de se plaindre et n'avoir pas raison de se plaindre --
[Victor Hugo]
Hors ligne
#19 Le 15/12/2021, à 13:26
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
FrancisFDZ a écrit :
Phil17 a écrit :@FrancisFDZ. Cette souris m'est très utile pour travailler sur deux voire trois ordinateurs en même temps. Hors de question de la bazarder (vu son prix et ses qualités) si je sais ses défauts et arrive à les résoudre ou corriger (avec votre aide si nécessaire).
No problem ! Et c'est dans l'air du temps : tant que ça marche, pourquoi jeter ?
J'ai d’ailleurs deux autres souris Logitech, avec l'une un petit dongle (non Unifiying), l'autre (première génération, c'était le top à l'époque) avec un énorme récepteur, les deux fonctionnent toujours parfaitement en cas de doute d'une souris.
Reste à comprendre la logique Bluetooth de Logitech qui refuse d'adapter ses produits à Linux et voir aussi s'il n'y a pas un mode "économie" dans la gestion Bluetooth de Ubuntu (ou dans la souris elle-même) car si je laisse la souris inutilisée quelques secondes, il y a un temps de latence avant qu'elle ne réagisse, ceci expliquerait cela...
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#20 Le 15/12/2021, à 13:48
- xubu1957
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Pour nettoyer les fichiers de configuration devenus sans objets et marqués "rc", et uniquement ces fichiers, exécute :
Le 22/07/2020, nany a écrit :
dpkg -l | awk '/^rc/ && !/sql/{print $2}' | xargs -r sudo dpkg -P
Pour info, les précisions de nany, pour la commande de nettoyage
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#21 Le 15/12/2021, à 13:50
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Merci Xubu, j'avais vu cette commande de nany mais je n'osais le faire.
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#22 Le 15/12/2021, à 13:57
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Commande effectuée, ça ne change pas grand chose.
J'ai toujours ces "Critical dans le fichier /home/user/.xsession-errors. Je ne sais pas si je poste correctement ce fichier.
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/phil/.Xauthority
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting SHELL=/bin/bash
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting XDG_CONFIG_DIRS=/etc/xdg/xdg-xubuntu:/etc/xdg
dbus-update-activation-environment: setting XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session0
dbus-update-activation-environment: setting CLUTTER_BACKEND=x11
dbus-update-activation-environment: setting LANGUAGE=fr_FR
dbus-update-activation-environment: setting DESKTOP_SESSION=xubuntu
dbus-update-activation-environment: setting PWD=/home/phil
dbus-update-activation-environment: setting XDG_SESSION_DESKTOP=xubuntu
dbus-update-activation-environment: setting LOGNAME=phil
dbus-update-activation-environment: setting QT_QPA_PLATFORMTHEME=gtk2
dbus-update-activation-environment: setting XDG_SESSION_TYPE=x11
dbus-update-activation-environment: setting GPG_AGENT_INFO=/run/user/1000/gnupg/S.gpg-agent:0:1
dbus-update-activation-environment: setting XAUTHORITY=/home/phil/.Xauthority
dbus-update-activation-environment: setting XDG_GREETER_DATA_DIR=/var/lib/lightdm-data/phil
dbus-update-activation-environment: setting GDM_LANG=fr_FR
dbus-update-activation-environment: setting HOME=/home/phil
dbus-update-activation-environment: setting IM_CONFIG_PHASE=1
dbus-update-activation-environment: setting LANG=fr_FR.UTF-8
dbus-update-activation-environment: setting XDG_CURRENT_DESKTOP=XFCE
dbus-update-activation-environment: setting XDG_SEAT_PATH=/org/freedesktop/DisplayManager/Seat0
dbus-update-activation-environment: setting XDG_SESSION_CLASS=user
dbus-update-activation-environment: setting GTK_OVERLAY_SCROLLING=0
dbus-update-activation-environment: setting USER=phil
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting SHLVL=1
dbus-update-activation-environment: setting XDG_RUNTIME_DIR=/run/user/1000
dbus-update-activation-environment: setting XDG_DATA_DIRS=/usr/share/xfce4:/usr/share/xubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop
dbus-update-activation-environment: setting PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
dbus-update-activation-environment: setting GDMSESSION=xubuntu
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting _=/usr/bin/dbus-update-activation-environment
/usr/bin/iceauth: creating new authority file /run/user/1000/ICEauthority
** Message: 12:54:54.880: couldn't access control socket: /run/user/1000/keyring/control: Aucun fichier ou dossier de ce type
xfwm4-Message: 12:54:55.399: Prefer XPresent with Mesa Intel(R) UHD Graphics 630 (CFL GT2)
(xfce4-session:1316): GLib-WARNING **: 12:54:55.760: GChildWatchSource: Exit status of a child process was requested but ECHILD was received by waitpid(). See the documentation of g_child_watch_source_new() for possible causes.
(wrapper-2.0:1721): Gtk-WARNING **: 12:54:56.426: Negative content width -3 (allocation 1, extents 2x2) while allocating gadget (node button, owner GtkToggleButton)
** (wrapper-2.0:1793): WARNING **: 12:54:56.471: No outputs have backlight property
(wrapper-2.0:1793): Gtk-WARNING **: 12:54:56.601: Negative content width -3 (allocation 1, extents 2x2) while allocating gadget (node button, owner PowerManagerButton)
(wrapper-2.0:1802): Gtk-WARNING **: 12:54:56.606: Negative content width -3 (allocation 1, extents 2x2) while allocating gadget (node button, owner PulseaudioButton)
(polkit-gnome-authentication-agent-1:2041): GLib-CRITICAL **: 12:54:56.827: g_variant_new_string: assertion 'string != NULL' failed
(polkit-gnome-authentication-agent-1:2041): polkit-gnome-1-WARNING **: 12:54:56.828: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
** (xfce4-screensaver:2055): WARNING **: 12:54:57.041: économiseur d’écran déjà lancé dans cette session
blueman-applet 12.54.57 WARNING PluginManager:147 __load_plugin: Not loading DhcpClient because its conflict has higher priority
blueman-applet 12.54.57 WARNING PluginManager:147 __load_plugin: Not loading PPPSupport because its conflict has higher priority
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
JavaScript error: resource://gre/modules/ActorManagerChild.jsm, line 297: TypeError: singletons is null
JavaScript error: resource://gre/modules/ActorManagerChild.jsm, line 297: TypeError: singletons is null
JavaScript error: resource://gre/modules/ActorManagerChild.jsm, line 297: TypeError: singletons is null
(thunar-volman:2667): GLib-CRITICAL **: 12:55:10.253: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2667): GLib-CRITICAL **: 12:55:10.254: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2667): GLib-CRITICAL **: 12:55:10.254: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2677): GLib-CRITICAL **: 12:55:10.448: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2677): GLib-CRITICAL **: 12:55:10.448: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2677): GLib-CRITICAL **: 12:55:10.448: g_strstr_len: assertion 'haystack != NULL' failed
thunar-volman: Périphérique d’entrée de type « /dev/input/event19 » non pris en charge.
(thunar-volman:2681): GLib-CRITICAL **: 12:55:10.511: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2681): GLib-CRITICAL **: 12:55:10.511: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2681): GLib-CRITICAL **: 12:55:10.511: g_strstr_len: assertion 'haystack != NULL' failed
XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne
#23 Le 15/12/2021, à 16:12
- iznobe
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Bonjour que donne :
ls -la ~retour utilisable de commande
MSI Z490A-pro , i7 10700 , 32 GB RAM .
Hors ligne
#24 Le 15/12/2021, à 16:14
- xubu1957
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
Au #22, les balises code font grève ? 
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#25 Le 15/12/2021, à 16:28
- Phil17
Re : Lenteur au démarrage (et à l'arrêt) après ré-installation
@Xubu, c'est pour ça que j'écrivais "Je ne sais pas si je poste correctement ce fichier".
;-)
Donc :
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/phil/.Xauthority
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting SHELL=/bin/bash
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1
dbus-update-activation-environment: setting XDG_CONFIG_DIRS=/etc/xdg/xdg-xubuntu:/etc/xdg
dbus-update-activation-environment: setting XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session0
dbus-update-activation-environment: setting CLUTTER_BACKEND=x11
dbus-update-activation-environment: setting LANGUAGE=fr_FR
dbus-update-activation-environment: setting DESKTOP_SESSION=xubuntu
dbus-update-activation-environment: setting PWD=/home/phil
dbus-update-activation-environment: setting XDG_SESSION_DESKTOP=xubuntu
dbus-update-activation-environment: setting LOGNAME=phil
dbus-update-activation-environment: setting QT_QPA_PLATFORMTHEME=gtk2
dbus-update-activation-environment: setting XDG_SESSION_TYPE=x11
dbus-update-activation-environment: setting GPG_AGENT_INFO=/run/user/1000/gnupg/S.gpg-agent:0:1
dbus-update-activation-environment: setting XAUTHORITY=/home/phil/.Xauthority
dbus-update-activation-environment: setting XDG_GREETER_DATA_DIR=/var/lib/lightdm-data/phil
dbus-update-activation-environment: setting GDM_LANG=fr_FR
dbus-update-activation-environment: setting HOME=/home/phil
dbus-update-activation-environment: setting IM_CONFIG_PHASE=1
dbus-update-activation-environment: setting LANG=fr_FR.UTF-8
dbus-update-activation-environment: setting XDG_CURRENT_DESKTOP=XFCE
dbus-update-activation-environment: setting XDG_SEAT_PATH=/org/freedesktop/DisplayManager/Seat0
dbus-update-activation-environment: setting XDG_SESSION_CLASS=user
dbus-update-activation-environment: setting GTK_OVERLAY_SCROLLING=0
dbus-update-activation-environment: setting USER=phil
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting SHLVL=1
dbus-update-activation-environment: setting XDG_RUNTIME_DIR=/run/user/1000
dbus-update-activation-environment: setting XDG_DATA_DIRS=/usr/share/xfce4:/usr/share/xubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop
dbus-update-activation-environment: setting PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
dbus-update-activation-environment: setting GDMSESSION=xubuntu
dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting _=/usr/bin/dbus-update-activation-environment
/usr/bin/iceauth: creating new authority file /run/user/1000/ICEauthority
** Message: 12:54:54.880: couldn't access control socket: /run/user/1000/keyring/control: Aucun fichier ou dossier de ce type
xfwm4-Message: 12:54:55.399: Prefer XPresent with Mesa Intel(R) UHD Graphics 630 (CFL GT2)
(xfce4-session:1316): GLib-WARNING **: 12:54:55.760: GChildWatchSource: Exit status of a child process was requested but ECHILD was received by waitpid(). See the documentation of g_child_watch_source_new() for possible causes.
(wrapper-2.0:1721): Gtk-WARNING **: 12:54:56.426: Negative content width -3 (allocation 1, extents 2x2) while allocating gadget (node button, owner GtkToggleButton)
** (wrapper-2.0:1793): WARNING **: 12:54:56.471: No outputs have backlight property
(wrapper-2.0:1793): Gtk-WARNING **: 12:54:56.601: Negative content width -3 (allocation 1, extents 2x2) while allocating gadget (node button, owner PowerManagerButton)
(wrapper-2.0:1802): Gtk-WARNING **: 12:54:56.606: Negative content width -3 (allocation 1, extents 2x2) while allocating gadget (node button, owner PulseaudioButton)
(polkit-gnome-authentication-agent-1:2041): GLib-CRITICAL **: 12:54:56.827: g_variant_new_string: assertion 'string != NULL' failed
(polkit-gnome-authentication-agent-1:2041): polkit-gnome-1-WARNING **: 12:54:56.828: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
** (xfce4-screensaver:2055): WARNING **: 12:54:57.041: économiseur d’écran déjà lancé dans cette session
blueman-applet 12.54.57 WARNING PluginManager:147 __load_plugin: Not loading DhcpClient because its conflict has higher priority
blueman-applet 12.54.57 WARNING PluginManager:147 __load_plugin: Not loading PPPSupport because its conflict has higher priority
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
ATTENTION: default value of option mesa_glthread overridden by environment.
JavaScript error: resource://gre/modules/ActorManagerChild.jsm, line 297: TypeError: singletons is null
JavaScript error: resource://gre/modules/ActorManagerChild.jsm, line 297: TypeError: singletons is null
JavaScript error: resource://gre/modules/ActorManagerChild.jsm, line 297: TypeError: singletons is null
(thunar-volman:2667): GLib-CRITICAL **: 12:55:10.253: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2667): GLib-CRITICAL **: 12:55:10.254: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2667): GLib-CRITICAL **: 12:55:10.254: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2677): GLib-CRITICAL **: 12:55:10.448: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2677): GLib-CRITICAL **: 12:55:10.448: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2677): GLib-CRITICAL **: 12:55:10.448: g_strstr_len: assertion 'haystack != NULL' failed
thunar-volman: Périphérique d’entrée de type « /dev/input/event19 » non pris en charge.
(thunar-volman:2681): GLib-CRITICAL **: 12:55:10.511: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2681): GLib-CRITICAL **: 12:55:10.511: g_strstr_len: assertion 'haystack != NULL' failed
(thunar-volman:2681): GLib-CRITICAL **: 12:55:10.511: g_strstr_len: assertion 'haystack != NULL' failedEt pour répondre à Iznobe :
phil@phil-XPS-15-7590:~$ ls -la ~
total 188
drwxr-xr-x 32 phil phil 4096 déc. 15 15:23 .
drwxr-xr-x 4 root root 4096 déc. 1 12:02 ..
drwxrwxr-x 5 phil phil 4096 déc. 2 12:13 'A vendre'
drwxrwxr-x 2 phil phil 4096 déc. 6 12:50 'Bandes Dessinées ZIP'
-rw------- 1 phil phil 7700 déc. 15 12:53 .bash_history
-rw-r--r-- 1 phil phil 220 déc. 1 12:02 .bash_logout
-rw-r--r-- 1 phil phil 3771 déc. 1 12:02 .bashrc
drwxr-xr-x 2 phil phil 4096 déc. 14 19:57 Bureau
drwxrwxr-x 22 phil phil 4096 déc. 15 15:23 .cache
drwxr-xr-x 32 phil phil 4096 déc. 15 12:45 .config
-rw-r--r-- 1 phil phil 26 déc. 5 18:02 .dmrc
drwxr-xr-x 20 phil phil 4096 déc. 6 16:42 Documents
drwxrwxr-x 2 phil phil 4096 déc. 2 19:59 dwhelper
drwx------ 3 phil phil 4096 déc. 1 12:17 .gnupg
drwxrwxr-x 2 phil phil 4096 déc. 6 12:51 "Harrap's Apprendre Espagnol"
drwxr-xr-x 3 phil phil 4096 déc. 1 12:47 .hplip
-rw------- 1 phil phil 0 déc. 1 12:17 .ICEauthority
drwxr-xr-x 12 phil phil 4096 déc. 3 20:36 Images
drwxr-xr-x 8 phil phil 4096 déc. 7 15:03 .kodi
drwxrwxr-x 4 phil phil 4096 déc. 4 19:49 .local
drwxr-xr-x 2 phil phil 4096 déc. 1 12:17 Modèles
drwx------ 5 phil phil 4096 déc. 1 14:06 .mozilla
drwxr-xr-x 2 phil phil 4096 déc. 3 19:17 Musique
drwxrwxr-x 5 phil phil 4096 déc. 6 13:06 MUSIQUE
drwxrwxr-x 21 phil phil 4096 déc. 6 13:00 NAUTIQUE
drwxrwxr-x 3 phil phil 4096 déc. 1 17:07 Nook
-rw-rw-r-- 1 phil phil 652 déc. 1 12:23 .nvidia-settings-rc
drwxrwxr-x 9 phil phil 4096 déc. 6 11:06 .opencpn
drwxrwxr-x 5 phil phil 4096 déc. 3 20:01 'OpenCPN actif'
drwxrwxr-x 7 phil phil 4096 déc. 3 20:34 OS
drwx------ 3 phil phil 4096 déc. 1 13:55 .pki
-rw-r--r-- 1 phil phil 807 déc. 1 12:02 .profile
drwxr-xr-x 2 phil phil 4096 déc. 1 12:17 Public
drwxrwxr-x 3 phil phil 4096 déc. 6 12:58 Réinstallation
-rw-r--r-- 1 phil phil 0 déc. 1 12:35 .sudo_as_admin_successful
drwxr-xr-x 2 phil phil 4096 déc. 14 15:43 Téléchargements
drwx------ 6 phil phil 4096 déc. 1 14:06 .thunderbird
drwxrwxr-x 2 phil phil 4096 déc. 1 17:11 Thunderbird
drwxr-xr-x 3 phil phil 4096 déc. 6 19:21 Vidéos
-rw------- 1 phil phil 61 déc. 15 15:23 .Xauthority
-rw-r--r-- 1 phil phil 1600 déc. 1 12:02 .Xdefaults
-rw-r--r-- 1 phil phil 14 déc. 1 12:02 .xscreensaver
-rw------- 1 phil phil 5182 déc. 15 15:23 .xsession-errors
-rw------- 1 phil phil 9307 déc. 15 14:09 .xsession-errors.old
drwxrwxr-x 2 phil phil 4096 déc. 2 20:24 Youtube-videos
phil@phil-XPS-15-7590:~$ XPS15 version 2020 (7590) i7-9750H, RAM : 16 Go, SSD 512 Go, Écran FHD 15,6"
Xubuntu 22.04LTS, TLP en mode BAT persistant.
Hors ligne