Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#2201 Le 25/12/2021, à 13:38

jibel

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

@geole,
Merci pour ton commentaire , mais pour moi, il y a un "hic". J'ai lu et vu tes deux derniers boot-info, les OSs présents Windows NT, Windows,7, 8, 10 plus quelques OSs libres qui en fait souvent ne sont  que des OSs non LTS, 18.10, 20.10et en plus 21 04 !
Beaucoup des OS présent sont intermédiaires non officiels.
Faire un essai de boot-info avec Ubuntu 22.04 64 bits, pas encore sortie, ou faire des commandes avec l'i386, qui sont pour un OS en 32 bits comme une des premières versions de boot-repair-disk en 32 bits avec lubuntu 11.04 il y a quelques années!
Perso je me demande a quoi sert ces manips avec des OSs qui ne sont pas des OSs libres, par sécurité?
Seulement certains intermittents non officiels en attendant que la version ubuntu 22.04 LTS sera officialisée dans quelques mois!
Merci de faire des propositions d'aides a Yannubuntu  pour que toutes les versions soient au top comme 4ppa141! 
Quand j'ai lu et vu le nombres d'OSs je me suis demandé? Pourquoi avoir dans son matériel autant d'OSs de Microsoft.
J'ai depuis plus de 10 ans, j'ai une tour Médion Akoya P5350D dans lequel il y avait Windows 7 préinstallé cette société est en O.E.M qui a des avantages financiers de faire des constructions pour les utilisateurs avec la garantie offerte par cette société pour Windows 7....hélas jusqu'au terme de cette garantie.
Je laisse imaginer le reste des ennuis !
Pour l'utilisation de B.R.D, dans certaines circonstances, je sais m'en servir pour modifier l'ordre du lancement de l'OS qui redeviendra 1er pour remplacer la nouvelle installation...tout cela avec "options avancées" ... Je fais cette commande depuis XXX années avec succès sans que B.R.D. deviendra obsolète.
Il peut arriver que certaines commandes sont a copier/coller  dans le terminal de B.R.D pour que le grub soit remplacé correctement...avec cette manipulation.

Dernière modification par jibel (Le 25/12/2021, à 13:49)


Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur. Elles doivent être reproduites et même corrigées sans l'accord préalable du susdit et toc !

Mint 17.1,Voyager20.04,Emmabuntus 1.Buster, Debian 10.buster, Hybryde 14.04, Pas d'OS intermédiaire ! PC Medion AKOYA  DD 1T + 2 .

Hors ligne

#2202 Le 25/12/2021, à 18:19

geole

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

YannUbuntu a écrit :

Dans ppa141 je vais aussi modifier GRUB_DISABLE_OS_PROBER=true en false par défaut. Pour l'instant je l'inclue dans l'option 'Faire apparaître le menu de démarrage' (donc activé par défaut), vous me direz si vous préférez une option séparée.

Bonjour YannUbuntu
Je ne sais pas exactement ce que tu as fait comme traitement.
Dans la version 18.04, J'avais l'option

GRUB_DISABLE_OS_PROBER=true

A priori, elle n'a pas été transformée en

GRUB_DISABLE_OS_PROBER=false

Elle a simplement été supprimée.
Pourquoi pas.
Je vais refaire un test avec la version 22.04. Si c'est le même comportement, cela veut dire que cela restera en true puisque l'option par défaut change.
Quelques extraits de cette réparation https://paste.ubuntu.com/p/kfNp7KYw2v/

boot-repair-4ppa141  

Please type: sudo chroot "/mnt/boot-sav/sda16" dpkg --configure -ansudo chroot "/mnt/boot-sav/sda16" apt-get install -fynsudo chroot "/mnt/boot-sav/sda16" apt-get install -y mdadmnsudo chroot "/mnt/boot-sav/sda16" mdadm --assemble --scannsudo chroot "/mnt/boot-sav/sda16" apt-get install -y dmraidnsudo chroot "/mnt/boot-sav/sda16" dmraid -aynsudo chroot "/mnt/boot-sav/sda16" apt-get install -y lvm2nsudo chroot "/mnt/boot-sav/sda16" apt-get purge --allow-remove-essential -y grub*-common shim-signed
Then type: sudo chroot "/mnt/boot-sav/sda16" apt-get install -y grub-efi


Unhide GRUB boot menu in sda16/etc/default/grub

====================== sda16/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
=================== sda16/boot/refind_linux.conf (filtered) ====================

Bonjour jibel
Le point sur mes O.S.
1) Version 16.04
Cette version ESM.  Donc opérationnelle jusqu'en 2026!
De temps en temps je m'y connecte pour faire les mises à jour de sécurité. Je l'ai donc fait très récemment. Comme il y avait des mises à jour. j'ai lancé la commande sudo apt upgrade
La quantité très importante de mise à jour aurait du m'alerter. Après mise à jour, le reboot est correct, Mais le bureau ne s'affiche pas, Le ventilateur tourne à mort. Un chroot m'a permis de voir qu'elle avait migré en 18.04.( J'ai aussi regardé l'historique des commandes; C'était bien un upgrade) Je pense que c'est un problème d'affichage entre unity/weyland qui se passe mal. Elle est maintenant supprimée.

2) Version 18.04 chiffrée.
Depuis un certain temps, je ne peux pas m'y connecter,    Je sais que la phrase de déchiffrage est correcte car je peux monter cette partition  d'une autre partition avec gnome-disks.
J'ai le droit à trois essais  puis mise en sommeil de 90 secondes en plantage. J'ai fais de multiples essais, Mais comme on ne peut pas visualiser  les chiffres frappés... Je peux malgré tout commettre une erreur. Je viens de décider de la réparer avec boot-repair. Maintenant, la séquence de boot me dit immédiatement que le mot de passe est faux sans que j'ai la possibilité de le frapper!!! J'ai tenté un peu de comprendre. Pendant la phase  de réparation, il y a un message semblant vouloir dire que la méthode de chiffrage n'est pas connue. Je n'ai pas investi plus, Cette partition devient une partition de données chiffrées.L'O.S. est maintenant viré.

3) Maintenant:  Version unique pour 18.04, 20.04, 21.01 et 22.04

4) Versions windows10 insider
    Une version dédiée à WSL. aucun autre logiciel applicatif dedans
    Une version pour les logiciels applicatifs autre que WSL
Récemment, j'ai décidé d'abandonner le programme insider. J'ai du mal gérer la demande, je suis resté insider avec suppression des mises à jour et message disant que c'est bientôt la fin du fonctionnement.
J'attends donc de voir comment cela va se passer dans quelques semaines ou quelques mois. Ce sont deux versions qui vont certainement bientôt disparaître.

5) Versions windows normales 21H2
     Une version dédiée à WSL. Aucun autre logiciel applicatif dedans.
     Une version pour les logiciels applicatifs autre que WSL.
Nota: Le matériel ne supporte pas WINDOWS11 car le TPM n'est pas en version 2.0!


YannUbuntu a écrit :

De ce que je vois c'est la purge de grub qui ne se fait pas entièrement. Il faudrait déterminer quel paquet en plus on doit purger, et dans quels cas de figure (quelles versions de grub ou d'ubuntu -> jammy uniquement?).

Il me semble que UBUNTU ne livre plus de structure de boot   en 36 bits.
Je pense  que toutes les versions de ubuntu anciens ont des boots qui fonctionnent. Peut-être que boot-repair  est aussi utilisé pour d'autres O.S. que ubuntu?
Je viens de faire un test en installant la structure de boot 36 bits dans de l'EFI. Je ne suis pas certain que dans la réalité, dans un vrai ordinateur non EFI, cela s'installerait de la même façon. Si oui, il faudrait modifier la commande de suppression

sudo chroot "/mnt/boot-sav/XXXXX" apt-get purge --allow-remove-essential -y grub*-common   shim-signed

En

sudo chroot "/mnt/boot-sav/XXXXX" apt-get purge --allow-remove-essential -y grub*-common  grub*-common:i386 shim-signed

Je pense que le caractère générique *   ne peut  pas être utilisé deux fois dans le même mot. J'ai donc été obligé de dupliquer. Tests faits en versions 18.04, 20.04, 21.10 et 22.04
je suis en train de télécharger une version Lubuntu 18.04 32 bits afin de voir comment cela se passera

AJOUT.  Avec une version 32 bits, les noms sont totalement normaux

dpkg -l | grep grub
ii  grub-common                            2.02-2ubuntu8.17                                 i386         GRand Unified Bootloader (common files)
ii  grub-gfxpayload-lists                  0.7                                              i386         GRUB gfxpayload blacklist
ii  grub-pc                                2.02-2ubuntu8.17                                 i386         GRand Unified Bootloader, version 2 (PC/BIOS version)
ii  grub-pc-bin                            2.02-2ubuntu8.17                                 i386         GRand Unified Bootloader, version 2 (PC/BIOS binaries)
ii  grub2-common                           2.02-2ubuntu8.17                                 i386         GRand Unified Bootloader (common files for version 2)

cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.5 LTS"

uname -a
Linux a 5.4.0-42-generic #46~18.04.1-Ubuntu SMP Fri Jul 10 07:09:27 UTC 2020 i686 i686 i686 GNU/Linux

ping 8.8.8.8
connect: Le réseau n'est pas accessible

Dernière modification par geole (Le 26/12/2021, à 18:02)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#2203 Le 26/12/2021, à 17:07

Babdu89

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Bonjour.
@YannUbuntu;

  Post#{2190
   YannUbuntu a écrit;

@Babdu: à partir de quelle version de grub (ou d'ubuntu) la partition BIOS-boot n'est-elle plus nécessaire ? source ?  (il faudrait documenter cela dans le wiki https://doc.ubuntu-fr.org/gpt )

Alors au sujet de ce type d'installation;
Un Ubuntu (ou autre Linux) en mode Bios_Legacy sur un disque avec table de partitions de type GPT, sans avoir besoin de partition bios-boot (ou bios-grub) sans format, drapeau bios-grub ou bios-boot.

Pour être certain de ne pas avoir la "berlue". J'ai refait une installation  Ubuntu 20.04 fraîche de ce type.
Session live démarrée en Bios_Legacy.
Clé de tests, /dev/sdb   table de partitions en GPT  installé en /dev/sdb1  Partition préparée avec Gparted avant installation. Sans partition  bios-boot (bios-grub)

boot-info fait depuis l'installation fraîche, ci-dessous;

    boot-info-4ppa141                                              [20211226_1607]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos2)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 
    63923824 of the same hard drive for core.img. core.img is at this location 
    and looks for (,gpt1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_gpt biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img


================================ 3 OS detected =================================

OS#1:   L'OS actuellement utilisé - Ubuntu 20.04.3 LTS CurrentSession on sdb1
OS#2:   Windows 7 on sda1
OS#3:   Ubuntu 20.04.3 LTS on sda2

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.11.0-43-generic root=UUID=7e4b6ebb-0602-4529-b814-2ac721b834c5 ro quiet splash vt.handoff=7


===================================== UEFI =====================================

This installed-session is not in EFI-mode.



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sdb	: is-GPT,	no-BIOSboot,	has-noESP, 	usb-disk,	not-mmc, has-os,	2048 sectors * 512 bytes
sda	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sdb1	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	not-far
sda1	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda2	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios

Partitions info (2/3): _________________________________________________________

sdb1	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda1	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot
sda2	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sdb1	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdb
sda1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda2	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 111.81 GiB, 120034123776 bytes, 234441648 sectors
Disk identifier: 0x00040603
      Boot    Start       End   Sectors  Size Id Type
sda1  *        2048  56383487  56381440 26.9G  7 HPFS/NTFS/exFAT
sda2       56383488 234440703 178057216 84.9G 83 Linux
Disk sdb: 60.1 GiB, 64525172736 bytes, 126025728 sectors
Disk identifier: 4FAD5CB1-CE95-4E21-B2CC-D13318C878EC
      Start       End   Sectors  Size Type
sdb1   2048 126023532 126021485 60.1G Linux filesystem

parted -lm (filtered): _________________________________________________________

sda:120GB:scsi:512:512:msdos:ATA LDLC:;
1:1049kB:28.9GB:28.9GB:ntfs::boot;
2:28.9GB:120GB:91.2GB:ext4::;
sdb:64.5GB:scsi:512:512:gpt:Verbatim STORE N GO:;
1:1049kB:64.5GB:64.5GB:ext4::;

Free space (filtered): _________________________________________________________

sda:114473MiB:scsi:512:512:msdos:ATA LDLC:;
1:0.03MiB:1.00MiB:0.97MiB:free;
1:114473MiB:114473MiB:0.46MiB:free;
sdb:61536MiB:scsi:512:512:gpt:Verbatim STORE N GO:;
1:0.02MiB:1.00MiB:0.98MiB:free;
1:61535MiB:61536MiB:1.06MiB:free;

gdisk (filtered): ______________________________________________________________

Found invalid GPT and valid MBR; converting MBR to GPT format
Disk /dev/sda: 234441648 sectors, 111.8 GiB
Disk identifier (GUID): 736DA1F9-84A8-4056-9475-FDDFB915149D
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 234441614
Partitions will be aligned on 2048-sector boundaries
Total free space is 2925 sectors (1.4 MiB)
Number  Start (sector)    End (sector)  Size       Code  Name
1            2048        56383487   26.9 GiB    0700  Microsoft basic data
2        56383488       234440703   84.9 GiB    8300  Linux filesystem
GPT: damaged
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
Disk /dev/sdb: 126025728 sectors, 60.1 GiB
Disk identifier (GUID): 4FAD5CB1-CE95-4E21-B2CC-D13318C878EC
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 126025694
Partitions will be aligned on 2048-sector boundaries
Total free space is 4176 sectors (2.0 MiB)
Number  Start (sector)    End (sector)  Size       Code  Name
1            2048       126023532   60.1 GiB    8300

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL            PARTLABEL
sda                                                                                                        
├─sda1 ntfs     FA2AC6152AC5CF37                     00040603-01                          windows-7-del    
└─sda2 ext4     9f5305b9-ddf9-4400-838d-7bb99f8b492f 00040603-02                          ubuntu20.04-dell 
sdb                                                                                                        
└─sdb1 ext4     7e4b6ebb-0602-4529-b814-2ac721b834c5 9612f5ca-a18b-4eef-9d9d-41d7b566db68                  

df (filtered): _________________________________________________________________

       Avail Use% Mounted on
sda1     2.9G  89% /mnt/boot-sav/sda1
sda2     5.7G  88% /media/bernard/ubuntu20.04-dell
sdb1    45.1G  18% /

Mount options: __________________________________________________________________

sda1   rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sda2   rw,nosuid,nodev,relatime
sdb1   rw,relatime,errors=remount-ro

====================== sda2/boot/grub/grub.cfg (filtered) ======================

Ubuntu   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu, avec Linux 5.11.0-43-generic   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu, avec Linux 5.11.0-41-generic   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Windows 7 (sur sda1)   FA2AC6152AC5CF37
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda2/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb16 during installation
UUID=9f5305b9-ddf9-4400-838d-7bb99f8b492f /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdc6 during installation
/file.swap none swap sw 0 0

======================= sda2/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda2: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  61,620223999 = 66,164211712   boot/grub/grub.cfg                             1
  32,926273346 = 35,354316800   boot/grub/i386-pc/core.img                     1
  74,490428925 = 79,983489024   boot/vmlinuz                                   2
  52,940639496 = 56,844578816   boot/vmlinuz-5.11.0-41-generic                 2
  74,490428925 = 79,983489024   boot/vmlinuz-5.11.0-43-generic                 2
  52,940639496 = 56,844578816   boot/vmlinuz.old                               2
  67,377925873 = 72,346497024   boot/initrd.img                               12
  84,648162842 = 90,890272768   boot/initrd.img-5.11.0-41-generic             13
  67,377925873 = 72,346497024   boot/initrd.img-5.11.0-43-generic             12
  84,648162842 = 90,890272768   boot/initrd.img.old                           13

===================== sda2: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18151 août  12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 août  17  2020 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom

====================== sdb1/boot/grub/grub.cfg (filtered) ======================

Ubuntu   7e4b6ebb-0602-4529-b814-2ac721b834c5
Ubuntu, avec Linux 5.11.0-43-generic   7e4b6ebb-0602-4529-b814-2ac721b834c5
Ubuntu, avec Linux 5.4.0-26-generic   7e4b6ebb-0602-4529-b814-2ac721b834c5
Windows 7 (sur sda1)   FA2AC6152AC5CF37
Ubuntu 20.04.3 LTS (20.04) (sur sda2)   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu (sur sda2)   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu, avec Linux 5.11.0-43-generic (sur sda2)   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu, avec Linux 5.11.0-41-generic (sur sda2)   9f5305b9-ddf9-4400-838d-7bb99f8b492f
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb1/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb1 during installation
UUID=7e4b6ebb-0602-4529-b814-2ac721b834c5 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0

======================= sdb1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sdb1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
   6,473083496 = 6,950420480    boot/grub/grub.cfg                             2
  30,481277466 = 32,729022464   boot/grub/i386-pc/core.img                     1
   5,785350800 = 6,211973120    boot/vmlinuz                                   1
   5,785350800 = 6,211973120    boot/vmlinuz-5.11.0-43-generic                 1
   4,366413116 = 4,688400384    boot/vmlinuz-5.4.0-26-generic                  2
   4,366413116 = 4,688400384    boot/vmlinuz.old                               2
   9,598079681 = 10,305859584   boot/initrd.img                                2
   9,598079681 = 10,305859584   boot/initrd.img-5.11.0-43-generic              2
   9,478275299 = 10,177220608   boot/initrd.img-5.4.0-26-generic               1
   9,478275299 = 10,177220608   boot/initrd.img.old                            1

===================== sdb1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18151 août  12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 août  12 11:18 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom


================================= User choice ==================================

Is sdb (Verbatim STORE N GO) a removable disk? yes



Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub2 of
sdb1 into the MBR of sdb.
It would also fix access to other systems (other MBRs) for the situations
when the removable media is disconnected.
Grub-efi would not be selected by default because no ESP detected.
Additional repair would be performed: unhide-bootmenu-10s      

Blockers in case of suggested repair: __________________________________________

 GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again.

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your BIOS boot on the removable disk! 


Comme je communique en MP avec jibel, qui voudrait bien tester ce type d'installation.
Sur un disque avec table de partition GPT,  Une Emmabuntüs  Debian GNU/Linux 11 (bullseye)
qui est intallé actuellement sur un disque avec table de partition MSDos dont voici une partie du boot-info, on voit la version de Grub.

  db6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v2.00) is installed in the boot sector of sdb6 
                       and looks at sector 24845152 of the same hard drive 
                       for core.img. core.img is at this location and looks 
                       for (,msdos6)/boot/grub. It also embeds following 
                       components:
                       
                       modules
                       -------------------------------------------------------
                       fshelp ext2 part_msdos biosdisk
                       -------------------------------------------------------
    Operating System:  Debian GNU/Linux 11 (bullseye)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

En mettant la première partie de grub dans le secteur de boot de la partition d'installation.


Il tente donc d'installer en mode Bios_Legacy sur un disque avec table de partition GPT.
Et dans le panneau de l'installateur, il y a un message lui indiquant de d’abord créer une partition bios-boot avec les indications qui conviennent pour le faire.

Ce genre de situation m'appelle à réflexion?.
Et si ce n'était pas la version de l'Os que l'on tente d'installer dans ces conditions, mais la version de Grub qui est proposé avec l'iso, qui a amené à ce changement?
Je suis bien incapable de répondre à cette question...

Édit;
On voit dans le boot-info;

  gdisk (filtered): ______________________________________________________________

Found invalid GPT and valid MBR; converting MBR to GPT format
Disk /dev/sda: 234441648 sectors, 111.8 GiB
Disk identifier (GUID): 736DA1F9-84A8-4056-9475-FDDFB915149D
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 234441614
Partitions will be aligned on 2048-sector boundaries
Total free space is 2925 sectors (1.4 MiB)
Number  Start (sector)    End (sector)  Size       Code  Name
1            2048        56383487   26.9 GiB    0700  Microsoft basic data
2        56383488       234440703   84.9 GiB    8300  Linux filesystem
GPT: damaged
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
Disk /dev/sdb: 126025728 sectors, 60.1 GiB
Disk identifier (GUID): 4FAD5CB1-CE95-4E21-B2CC-D13318C878EC
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 126025694
Partitions will be aligned on 2048-sector boundaries
Total free space is 4176 sectors (2.0 MiB)
Number  Start (sector)    End (sector)  Size       Code  Name
1            2048       126023532   60.1 GiB    8300

Alors,  clé de tests non branchée.  J'ai ouvert Gparted, il n'y a pas de messages d'erreur.
Je branche la clé et actualise les périphériques.
Gparted  grongne un peut ; The backup GPT table is corrupt, but the primary appears OK,
so tha will bee used

Et propose deux boutons
Valider==> me montre la partition /dev/sdb1 sans erreur
Annuler==> me montre un espace disue non alloué.


@+.   Babdu89 .

Dernière modification par Babdu89 (Le 26/12/2021, à 17:41)


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#2204 Le 26/12/2021, à 18:10

geole

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Bonjour Babdu89
C'est totalement normal d'avoir une partition avec un flag  BIOS_GRUB en présence d'une table de partiton GPT; Sinon  on a ce message

sudo grub-install /dev/sdd
Installation pour la plate-forme i386-pc.
grub-install : attention : cette étiquette de partition GPT ne contient pas de partition d'amorçage BIOS ; l'embarquage ne sera pas possible.
grub-install : erreur : l'embarquage est impossible, il est pourtant nécessaire pour les installations interdisques.
sudo grub-install /dev/sdd6
Installation pour la plate-forme i386-pc.
grub-install : attention : Le système de fichiers « ext2 » ne prend pas en charge l'embarquage.
grub-install : erreur : l'embarquage est impossible, il est pourtant nécessaire pour les installations interdisques.

C'est aussi pareil en 32 bits

 sudo grub-install /dev/sdd 
Installation pour la plate-forme i386-pc.
grub-install : attention : cette étiquette de partition GPT ne contient pas de partition d'amorçage BIOS ; l'embarquage ne sera pas possible.
grub-install : attention : L'embarquage est impossible. GRUB ne peut être installé sur cette configuration qu'en utilisant les listes de blocs. Cependant, les listes de blocs ne sont PAS fiables et leur utilisation est déconseillée..
grub-install : erreur : refus de continuer avec les listes de blocs.

 uname -a
Linux a 5.4.0-42-generic #46~18.04.1-Ubuntu SMP Fri Jul 10 07:09:27 UTC 2020 i686 i686 i686 GNU/Linux

sudo grub-install /dev/sdd6
Installation pour la plate-forme i386-pc.
grub-install : attention : Le système de fichiers « ext2 » ne prend pas en charge l'embarquage.
grub-install : attention : L'embarquage est impossible. GRUB ne peut être installé sur cette configuration qu'en utilisant les listes de blocs. Cependant, les listes de blocs ne sont PAS fiables et leur utilisation est déconseillée..
grub-install : erreur : refus de continuer avec les listes de blocs.


===> Le grub ne peut pas écrire dans les secteurs 1 a 33, Il faudrait  qu'il commence à 34
C'est Le grub livré avec les applications 64 bits..

On peut même le faire pour une table de partition MS-DOS.

Dernière modification par geole (Le 26/12/2021, à 18:27)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#2205 Le 26/12/2021, à 18:33

geole

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Babdu89 a écrit :

Gparted  grongne un peut ; The backup GPT table is corrupt, but the primary appears OK,
so tha will bee used

Et propose deux boutons
Valider==> me montre la partition /dev/sdb1 sans erreur
Annuler==> me montre un espace disue non alloué.


@+.   Babdu89 .

Pour réparer le backup

Récupérer la table de partition de backup

sudo gdisk /dev/sda
?     => afin de connaître les options
x    => Afin d'utiliser le mode experts
?    => afin de savoir ce qu'on peut faire
r    => Afin de passer en mode recovery
?    => afin de savoir ce qu'on peut faire
b      =>> use backup GPT header (rebuilding main) afin de remettre en état
w    =>  afin d'écrire
q     =>  afin de quitter

Il me semble qu'il doit y avoir plus une demande de cofirmation au moment de l'écriture

Dernière modification par geole (Le 26/12/2021, à 18:35)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#2206 Le 26/12/2021, à 18:46

Babdu89

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Bonjour geole.

Normal oui, ou non?.

J'ai remarqué dans des sujets de demandes d'aide des installations faites comme je l'explique.
Table de partition de type GPT.
Machine démarrée en session live Bios_Legacy.
Installation sans partition bios-boot ou bios-grub.
Ça fonctionne puisque j'ai vu ça dans des boot-info, et ça m'avait étonné.

L'installation que je viens de tester comme ceci, pour bien m'assurer de ne pas dire de bêtises.
/dev/sdb   table de partition GPT  pas de partition bios-boot (bios-grub) une seule partition Ext4 pour installer.
Dans l'installateur de Ubuntu 20.04.
J'ai surveillé l'installation de Grub, dans le fenêtre qui montre le peu de commandes.
Il n'y a pas de message d'erreur.
Il annonce grub install succesfully dans /dev/sdb,
Le système démarre normalement sans message d'erreur.
Il n'y a pas de partition bios-boot.
Le boot-info est fait depuis la session installée. Voir le boot-info.

Alors, que penser??.

Édit.
Lorsque j'aurais un moment je refais l'installation sur tout le disque, mais en laissant faire l'installateur en automatique, pour voir comment ça se comporte.
Je ne ferais qu'une table de partition nouvelle en GPT sans faire de partition.

@+.   Babdu89   .

Dernière modification par Babdu89 (Le 26/12/2021, à 18:51)


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#2207 Le 26/12/2021, à 19:12

geole

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Babdu89 a écrit :

Bonjour geole.

Normal oui, ou non?.

....
Il annonce grub install succesfully dans /dev/sdb,
Le système démarre normalement sans message d'erreur.
Il n'y a pas de partition bios-boot.
Le boot-info est fait depuis la session installée. Voir le boot-info.

Maintenant, depuis le systeme opérationnel refais la commande

sudo grub-install /dev/sdb

Le secteur ZERO est un protective MBR, L'installateur a certainement des astuces pour le casser.
Mais on voit que la struture de boot est ailleurs
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector
    63923824 of the same hard drive for core.img. core.img is at this location
    and looks for (,gpt1)/boot/grub.

Je pense que c'est l'adresse de ce fichier  /boot/grub/i386-pc/core.img  qu'il ne faut jamais déplacer
==================== sda2: Location of files loaded by Grub ====================
           GiB - GB             File                                 Fragment(s)                         1
  32,926273346 = 35,354316800   boot/grub/i386-pc/core.img 
Mais cela ne colle pas  32,926273346*1024*1024*2=69051400

Dernière modification par geole (Le 26/12/2021, à 19:33)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#2208 Le 26/12/2021, à 21:19

Babdu89

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Alors;


La table de partitions GPT de sauvegarde est corrompue, mais la primaire semble fonctionnelle, elle sera donc utilisée.
Disque /dev/sdb : 60,1 GiB, 64525172736 octets, 126025728 secteurs
Disk model: STORE N GO      
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 4FAD5CB1-CE95-4E21-B2CC-D13318C878EC

Périphérique Début       Fin  Secteurs Taille Type
/dev/sdb1     2048 126023532 126021485  60,1G Système de fichiers Linux


Disque /dev/loop8 : 4 KiB, 4096 octets, 8 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
bernard@bernard-Latitude-E4310:~$ 
bernard@bernard-Latitude-E4310:~$ 
bernard@bernard-Latitude-E4310:~$ sudo grub-install /dev/sdb
Installation pour la plate-forme i386-pc.
grub-install : attention : cette étiquette de partition GPT ne contient pas de partition d'amorçage BIOS ; l'embarquage ne sera pas possible.
grub-install : attention : L'embarquage est impossible. GRUB ne peut être installé sur cette configuration qu'en utilisant les listes de blocs. Cependant, les listes de blocs ne sont PAS fiables et leur utilisation est déconseillée..
grub-install : erreur : refus de continuer avec les listes de blocs.
bernard@bernard-Latitude-E4310:~$ 

OK,OK!.
Mais c'est quand même étrange que l'on puisse installer comme ça. Mais pas réinstaller Grub par la suite.


ÉDIT;
J'ai ajouté une partition bios-grub et c'est OK!;


La table de partitions GPT de sauvegarde est corrompue, mais la primaire semble fonctionnelle, elle sera donc utilisée.
Disque /dev/sdb : 60,1 GiB, 64525172736 octets, 126025728 secteurs
Disk model: STORE N GO      
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt
Identifiant de disque : 4FAD5CB1-CE95-4E21-B2CC-D13318C878EC

Périphérique     Début       Fin  Secteurs Taille Type
/dev/sdb1         2048 118212607 118210560  56,4G Système de fichiers Linux
/dev/sdb2    118212608 118353919    141312    69M Amorçage BIOS


Disque /dev/loop8 : 27,9 MiB, 28405760 octets, 55480 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop9 : 49,8 MiB, 52203520 octets, 101960 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop10 : 54,24 MiB, 56872960 octets, 111080 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop11 : 43,28 MiB, 45371392 octets, 88616 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/loop12 : 65,22 MiB, 68378624 octets, 133552 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
bernard@bernard-Latitude-E4310:~$ sudo grub-install /dev/sdb
Installation pour la plate-forme i386-pc.
Installation terminée, sans erreur.
bernard@bernard-Latitude-E4310:~$ 


@+.    Babdu89   .

Dernière modification par Babdu89 (Le 26/12/2021, à 21:38)


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#2209 Le 27/12/2021, à 00:31

jibel

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

C'est fait.... avec un retard...


Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur. Elles doivent être reproduites et même corrigées sans l'accord préalable du susdit et toc !

Mint 17.1,Voyager20.04,Emmabuntus 1.Buster, Debian 10.buster, Hybryde 14.04, Pas d'OS intermédiaire ! PC Medion AKOYA  DD 1T + 2 .

Hors ligne

#2210 Le 27/12/2021, à 00:47

YannUbuntu

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Bonsoir, j'espère que vous avez passé un joyeux Noël :-)

geole, j'ai trouvé le soucis pour GRUB_DISABLE_OS_PROBER , sera corrigé dans ppa142.

Concernant la purge, ça devrait fonctionner avec cette double commande :

sudo chroot "/mnt/boot-sav/XXXXX" apt-get purge --allow-remove-essential -y grub-common* ; sudo chroot "/mnt/boot-sav/XXXXX" apt-get purge --allow-remove-essential -y grub2-common*

sachant que la commande ci-dessous serait plus simple, mais peut poser problème dans certains cas (erreurs de type E: Unable to locate package grub-reinstall_programs )

sudo chroot "/mnt/boot-sav/XXXXX" apt-get purge --allow-remove-essential -y grub* 

à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison

Hors ligne

#2211 Le 27/12/2021, à 16:08

geole

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

YannUbuntu a écrit :

Bonsoir, j'espère que vous avez passé un joyeux Noël :-)

geole, j'ai trouvé le soucis pour GRUB_DISABLE_OS_PROBER , sera corrigé dans ppa142.

Bonjour
Extraits de cette réparation https://paste.ubuntu.com/p/DjqbnbdX34/
Montrant que l'option a bien été ajoutée

Additional repair would be performed: unhide-bootmenu-10s win-legacy-basic-fix     
======================= sda4/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash "
GRUB_CMDLINE_LINUX=""
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset noresume dis_ucode_ldr vga=0x31B"
GRUB_DEFAULT=4
GRUB_OS_PROBER_SKIP_LIST="39A322D60E9DD672@/dev/sda2","796B23D11411E4F8@/dev/sdb1","4014B1E11150574B@/dev/sdb3","4534E9C60E9DD672@/dev/sdc2","09FD70E16774D4DD@/dev/sdc5","39A322D60E9DD672@/dev/sdc6","C87C9DA77C9D90B4@/dev/sdc7","6CDFEB2715556D21@/dev/sdc8","6CDFEB2715556D21@/dev/sdc9","2E6C45FC0E9DD672@/dev/sdc1","C87C9DA77C9D90B4@/dev/sdc10","654A71280E9DD672@/dev/sdb1","89ff72bd-c574-4489-91b2-800fd79c7fee@/dev/sdc6","6CDFEB2715556D21@/dev/sdc16","39A322D60E9DD672@/dev/sdc8","2E6C45FC0E9DD672@/dev/sdc12","654A71280E9DD672@/dev/sdc2","796B23D11411E4F8@/dev/sdc8" 
GRUB_TIMEOUT_STYLE=menu
GRUB_DISABLE_OS_PROBER=false

Vérifications complémentaires faites
Si la ligne  existe avec la valeur true, elle est rectifiée pour devenir false.
Si la ligne existe avec la valeur  false, il n'y a pas d'ajout lors des corrections suivantes.

Dernière modification par geole (Le 27/12/2021, à 16:22)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#2212 Le 28/12/2021, à 00:11

YannUbuntu

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Merci geole pour la verification.

ppa143:
- le pastebin vide de type  https://paste2.org/  (iznobe) ne devrait plus se reproduire
- ne tente plus d'installer grub-pc sur les disques GPT sans bios-boot, bloque si disque principal, silencieusement pour les autres (quand install sur plusieurs disques).
- remplacement de la purge grub*-common+shim-signed par la double commande (grub-common* puis grub2-common*)


à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison

Hors ligne

#2213 Le 28/12/2021, à 18:04

geole

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

YannUbuntu a écrit :

- remplacement de la purge grub*-common+shim-signed par la double commande (grub-common* puis grub2-common*)

Bonjour
Juste un petit problème, Les commandes proposées n'ont plus le préfixe sudo chroot sur la partition sélectionnée.

sudo dpkg --configure -a
sudo apt-get install -fy
sudo apt-get install -y mdadm
sudo mdadm --assemble --scan
sudo apt-get install -y dmraid
sudo dmraid -ay
sudo apt-get install -y lvm2
sudo apt-get purge --allow-remove-essential -y grub-common*
sudo apt-get purge --allow-remove-essential -y grub2-common*

J'ai recommencé pour en être sur.

Dernière modification par geole (Le 28/12/2021, à 18:12)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#2214 Le 29/12/2021, à 02:45

YannUbuntu

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

tu étais bien en session live? si oui, peux-tu me transmettre ton log complet stp ?


à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison

Hors ligne

#2215 Le 29/12/2021, à 13:20

geole

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Bonjour
Ce n'est pas facile de te transmettre le log de la réparation.
En effet, si je lance les commandes proposées,

sudo dpkg --configure -a
sudo apt-get install -fy
sudo apt-get install -y mdadm
sudo mdadm --assemble --scan
sudo apt-get install -y dmraid
sudo dmraid -ay
sudo apt-get install -y lvm2
sudo apt-get purge --allow-remove-essential -y grub-common*
sudo apt-get purge --allow-remove-essential -y grub2-common*

cela va traiter le live-usb....

Voici un premier retour en ligne de commande

ubuntu@ubuntu:/mnt/boot-sav$ df -h
Sys. de fichiers           Taille Utilisé Dispo Uti% Monté sur
udev                         2,9G       0  2,9G   0% /dev
tmpfs                        584M    1,9M  582M   1% /run
/dev/mapper/ventoy           2,7G    2,7G     0 100% /cdrom
/dev/loop0                   2,0G    2,0G     0 100% /rofs
/cow                         2,9G    250M  2,7G   9% /
tmpfs                        2,9G       0  2,9G   0% /dev/shm
tmpfs                        5,0M    8,0K  5,0M   1% /run/lock
tmpfs                        2,9G       0  2,9G   0% /sys/fs/cgroup
tmpfs                        2,9G    504K  2,9G   1% /tmp
/dev/loop1                    56M     56M     0 100% /snap/core18/1988
/dev/loop2                    52M     52M     0 100% /snap/snap-store/518
/dev/loop3                    32M     32M     0 100% /snap/snapd/11036
/dev/loop4                    65M     65M     0 100% /snap/gtk-common-themes/1514
/dev/loop5                   219M    219M     0 100% /snap/gnome-3-34-1804/66
tmpfs                        584M     68K  584M   1% /run/user/999
/dev/sda2                    505M     57M  449M  12% /mnt/boot-sav/sda2
/dev/sda3                     63M     15M   49M  24% /mnt/boot-sav/sda3
/dev/sda4                     63M     43M   21M  67% /mnt/boot-sav/sda4
/dev/sda5                     63M     27M   37M  42% /mnt/boot-sav/sda5
/dev/sda6                     63M    4,2M   59M   7% /mnt/boot-sav/sda6
/dev/sda7                    250M    249M  1,2M 100% /mnt/boot-sav/sda7
/dev/sda8                     69G     38G   31G  55% /mnt/boot-sav/sda8
/dev/sda10                   832M    489M  344M  59% /mnt/boot-sav/sda10
/dev/sda11                    14G    9,0G  4,0G  70% /mnt/boot-sav/sda11
/dev/sda13                    30G     14G   15G  50% /mnt/boot-sav/sda13
/dev/sda14                    23G     14G  7,3G  66% /mnt/boot-sav/sda14
/dev/sda16                    58G     91M   57G   1% /mnt/boot-sav/sda16
/dev/sda17                    24G     19G  3,7G  84% /mnt/boot-sav/sda17
/dev/sda18                    36G     23G   13G  65% /mnt/boot-sav/sda18
/dev/sda19                    36G     27G  9,2G  75% /mnt/boot-sav/sda19
/dev/sda20                    90G     55G   36G  61% /mnt/boot-sav/sda20
/dev/sda21                   536G    333G  204G  63% /mnt/boot-sav/sda21
/dev/sdb5                     16G    6,2G  9,8G  39% /mnt/boot-sav/sdb5
/dev/sdb6                     16G     44M   15G   1% /mnt/boot-sav/sdb6
/dev/sdb7                     22G     87M   22G   1% /mnt/boot-sav/sdb7
/dev/mapper/Geole--vg-Data   3,9G

on y voit bien que je suis l'utilisateur "ubuntu" et que le point de montage est /cow
je vais poursuivre avec commandes rectifiées.

sudo chroot "/mnt/boot-sav/sda13" dpkg --configure -a
sudo chroot "/mnt/boot-sav/sda13" apt-get install -fy
sudo  chroot "/mnt/boot-sav/sda13" apt-get install -y mdadm
sudo chroot "/mnt/boot-sav/sda13" mdadm --assemble --scan
sudo chroot "/mnt/boot-sav/sda13" apt-get install -y dmraid
sudo chroot "/mnt/boot-sav/sda13" dmraid -ay
sudo chroot "/mnt/boot-sav/sda13" apt-get install -y lvm2

sudo chroot "/mnt/boot-sav/sda13" apt-get purge --allow-remove-essential -y grub-common*
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Note : sélection de grub-common pour l'expression rationnelle « grub-common* »
Le paquet « grub-common » n'est pas installé, et ne peut donc être supprimé. Peut-être vouliez-vous écrire « grub-common:i386 » ?
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  glade2script glade2script-python3 pastebinit
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
ubuntu@ubuntu:~$ sudo chroot "/mnt/boot-sav/sda13" apt-get purge --allow-remove-essential -y grub2-common*
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Note : sélection de grub2-common pour l'expression rationnelle « grub2-common* »
Le paquet « grub2-common » n'est pas installé, et ne peut donc être supprimé. Peut-être vouliez-vous écrire « grub2-common:i386 » ?
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  glade2script glade2script-python3 pastebinit
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
ubuntu@ubuntu:~$ 


Je viens de me rendre compte, qu'il n'y a plus de commande demandant de supprimer shim-signed

==> probablement normal puisque l'ordinateur n'est pas sécurisé et  que maintenant on n'utilise plus shim mais grub dans ce contexte.
sans surprise, cela dit que grub est encore présent.
donc

ubuntu@ubuntu:~$ sudo chroot "/mnt/boot-sav/sda13" apt-get purge --allow-remove-essential -y grub*-common
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Note : sélection de grub-common pour l'expression rationnelle « grub*-common »
Note : sélection de grub2-common pour l'expression rationnelle « grub*-common »
Le paquet « grub-common » n'est pas installé, et ne peut donc être supprimé. Peut-être vouliez-vous écrire « grub-common:i386 » ?
Le paquet « grub2-common » n'est pas installé, et ne peut donc être supprimé. Peut-être vouliez-vous écrire « grub2-common:i386 » ?
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  glade2script glade2script-python3 pastebinit
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
ubuntu@ubuntu:~$ sudo chroot "/mnt/boot-sav/sda13" apt-get purge --allow-remove-essential -y grub*-common:i386
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Note : sélection de grub-common:i386 pour l'expression rationnelle « grub*-common »
Note : sélection de grub2-common:i386 pour l'expression rationnelle « grub*-common »
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  glade2script glade2script-python3 libdevmapper1.02.1:i386 libfreetype6:i386 libfuse2:i386
  libpng16-16:i386 pastebinit
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets suivants seront ENLEVÉS :
  grub-common:i386* grub-efi* grub-efi-amd64* grub-efi-amd64-bin* grub-efi-amd64-signed* grub-pc-bin:i386*
  grub2-common:i386* os-prober:i386*
0 mis à jour, 0 nouvellement installés, 8 à enlever et 0 non mis à jour.
Après cette opération, 30,7 Mo d'espace disque seront libérés.
E: Impossible d'écrire le journal (Est-ce que /dev/pts est monté ?) - posix_openpt (19: Aucun périphérique de ce type)
(Lecture de la base de données... 202698 fichiers et répertoires déjà installés.)
Suppression de grub-efi (2.02-2ubuntu8.23) ...
Suppression de grub-efi-amd64-signed (1.167~18.04.5+2.04-1ubuntu44.1.2) ...
Suppression de grub-efi-amd64 (2.04-1ubuntu44.1.2) ...
Suppression de grub2-common:i386 (2.02-2ubuntu8.23) ...
Suppression de grub-efi-amd64-bin (2.04-1ubuntu44.1.2) ...
Suppression de grub-pc-bin:i386 (2.02-2ubuntu8.23) ...
Suppression de os-prober:i386 (1.74ubuntu1) ...
dpkg: avertissement: lors de la suppression de os-prober:i386, le répertoire « /var/lib/os-prober » n'était pas vide, donc il n'a pas été supprimé
Suppression de grub-common:i386 (2.02-2ubuntu8.23) ...
invoke-rc.d: could not determine current runlevel
Traitement des actions différées (« triggers ») pour man-db (2.8.3-2ubuntu0.1) ...
Traitement des actions différées (« triggers ») pour install-info (6.5.0.dfsg.1-2) ...
(Lecture de la base de données... 201966 fichiers et répertoires déjà installés.)
Purge des fichiers de configuration de grub-efi-amd64-bin (2.04-1ubuntu44.1.2) ...
Purge des fichiers de configuration de grub-efi-amd64 (2.04-1ubuntu44.1.2) ...
Purge des fichiers de configuration de grub-common:i386 (2.02-2ubuntu8.23) ...
Purge des fichiers de configuration de grub-efi (2.02-2ubuntu8.23) ...
Traitement des actions différées (« triggers ») pour systemd (237-3ubuntu10.52) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-21) ...
ubuntu@ubuntu:~$ 

Le même problème pour la suite
sudo apt-get install -y grub-efi
que je transforme en
sudo chroot "/mnt/boot-sav/sda13" apt-get install -y grub-efi

Voici  le lien https://paste.ubuntu.com/p/PGgNwnYsnC/

La raison est certainement celle-ci
/usr/share/boot-sav/gui-actions-grub.sh: ligne 187: force_unmount_and_prepare_chroot : commande introuvable

il y a aussi ce petit problème
/usr/share/boot-sav/gui-actions-grub.sh: ligne 284: erreur de syntaxe près du symbole inattendu « && »
/usr/share/boot-sav/gui-actions-grub.sh: ligne 284: `    && INSTALLEDINOTHERDISKS=yes'

Dernière modification par geole (Le 29/12/2021, à 14:03)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#2216 Le 29/12/2021, à 18:37

YannUbuntu

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

shim-signed ayant grub-common comme dépendance, il sera supprimé aussi, c'est pour cela que je l'ai retiré de la commande de purge.

geole a écrit :

La raison est certainement celle-ci
/usr/share/boot-sav/gui-actions-grub.sh: ligne 187: force_unmount_and_prepare_chroot : commande introuvable

il y a aussi ce petit problème
/usr/share/boot-sav/gui-actions-grub.sh: ligne 284: erreur de syntaxe près du symbole inattendu « && »
/usr/share/boot-sav/gui-actions-grub.sh: ligne 284: `    && INSTALLEDINOTHERDISKS=yes'

Bien vu! je pense que c'est une ligne de commentaire au mauvais endroit qui a créé ce bazar. Corrigé dans ppa144.

Dernière modification par YannUbuntu (Le 29/12/2021, à 18:38)


à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison

Hors ligne

#2217 Le 30/12/2021, à 03:00

YannUbuntu

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

ppa145: si Windows détecté, Boot-Repair n'installera pas grub dans tous les MBRs (mais seulement dans le mbr du Linux sélectionné).

Note pour moi: si plusieurs Linux disponibles, B-R devrait essayer de selectionner un qui n'est pas sur le meme disque que Windows. (pour éviter d'installer grub dans le mbr du disque Windows)


à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison

Hors ligne

#2218 Le 30/12/2021, à 07:51

geole

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

YannUbuntu a écrit :

Corrigé dans ppa144.

Bonjour
Donc ce matin, installation de boot-repair. C'est la version 144
Les commandes proposées  restent

sudo dpkg --configure -a
sudo apt-get install -fy
sudo apt-get install -y lvm2
sudo apt-get purge --allow-remove-essential -y grub-common*
sudo apt-get purge --allow-remove-essential -y grub2-common*

au lieu de

sudo chroot "/mnt/boot-sav/sda13" apt-get purge --allow-remove-essential -y grub*-common
sudo chroot "/mnt/boot-sav/sda13" apt-get purge --allow-remove-essential -y grub*-common:i386

Le rapport d'exécution https://paste.ubuntu.com/p/GzCKhXfv63/

IL y quelque chose que je ne comprends pas.
Je viens de recommencer    depuis le début (réinstallation du logiciel) et cette fois-ci, le chroot est bien inséré.
https://paste.ubuntu.com/p/wPSJDgCxSx/

Appartés
Note pour moi: si plusieurs Linux disponibles, B-R devrait essayer de sélectionner un qui n'est pas sur le même disque que Windows. (pour éviter d'installer grub dans le mbr du disque Windows)
Je pense que tu voulais dire  "si plusieurs disques"..


A propos de la question " is there RAID on this computer / y a t-il un RAIDS  dans votre ordinateur" qui déstabilise  pas mal de néophytes
Pour  ubuntu, Je pense avoir trouvé une solution  en exécutant cette commande lsblk | grep raid

a@a:~$ lsblk | grep raid
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 
│ └─md0   9:0    0 423,1G  0 raid5 

Le tout est de savoir si c'est généralisable aux autres O.S.

Dernière modification par geole (Le 30/12/2021, à 08:52)


Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit,  utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir  https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248

Hors ligne

#2219 Le 30/12/2021, à 08:43

Babdu89

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Bonjour.

@YannUbuntu.

Post#2217 tu dis;

ppa145: si Windows détecté, Boot-Repair n'installera pas grub dans tous les MBRs (mais seulement dans le mbr du Linux sélectionné).

Note pour moi: si plusieurs Linux disponibles, B-R devrait essayer de selectionner un qui n'est pas sur le meme disque que Windows. (pour éviter d'installer grub dans le mbr du disque Windows)

Je vais tester cette modification, pour voir ce que propose la réparation recommandée en Bios_Legacy.

Avec le 4ppa144 lancé en installé et en session live.
Puis lorsque 4ppa145 disponible refaire la même chose.

@+.   Babdu89   .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#2220 Le 30/12/2021, à 14:02

YannUbuntu

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

geole a écrit :

Je viens de recommencer    depuis le début (réinstallation du logiciel) et cette fois-ci, le chroot est bien inséré.

encore plus bizarre!  @tous: est-ce que quelqu'un d'autre reproduit le problème du chroot manquant ?  OU bien (TEST PLUS SIMPLE) faire une install grub-pc avec l'option 'dans tous les MBRs, et regarder dans le boot-info s'il y a une ou des erreurs commençant par /usr/share/boot-sav/ , par exemple:

/usr/share/boot-sav/gui-actions-grub.sh: line 284: syntax error near unexpected token `&&'
geole a écrit :

Je pense que tu voulais dire  "si plusieurs disques"..

Le 'si plusieurs disques et plusieurs Linux' est implicite, vu le reste de la phrase ;-)

geole a écrit :

Je pense avoir trouvé une solution  en exécutant cette commande lsblk | grep raid (..)
Le tout est de savoir si c'est généralisable aux autres O.S.

..et de savoir si ça n'exclut pas certains types de raid.
Boot-Repair détecte les raid via la fonction activate_raid_if_needed()  dans le fichier /usr/share/boot-sav/gui-raid-lvm.sh
Actuellement 2 cas:
1) si blkid contient la chaine de caratères 'raid' alors B-R considère qu'il y a raid.  Je pense que c'est équivalent à lsblk | grep raid .
2) si blkid ne contient pas 'raid' , mais qu'il contient au moins une ligne contenant '/dev/mapper/' mais pas 'swap'  ni 'LVM', alors B-R demande confirmation à l'utilisateur.

Je ne connais pas tous les types de raid, donc je prends toute suggestion d'amélioration :-)

ppa146: légère amélioration des messages d'erreurs

Dernière modification par YannUbuntu (Le 30/12/2021, à 14:10)


à consulter/améliorer: Guide du Débutant, Logiciels, Ecole, Travail, Maison

Hors ligne

#2221 Le 30/12/2021, à 18:41

jibel

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

@ YannUbuntu,
Je ne sais si j'intègre ici sur ta demande faire un test de boot-info de mes trois D.Ds dur dans lesquels, il n'y a aucun WXX...seulement que des OSs libres..je vais essayer de copier /coller  ce fichier qui sera  vu et lu avec "mousepad" ou un fichier texte

 oot-info-4ppa143                                              [20211230_1812]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos7)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos7)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos6)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda6: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  OpenMandriva Lx 4.2 (Argon) Official
    Boot files:        /boot/grub2/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub2/i386-pc/core.img

sda9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Debian GNU/Linux 11 (bullseye)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda10: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda11: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v2.00) is installed in the boot sector of sdb6 
                       and looks at sector 24845152 of the same hard drive 
                       for core.img. core.img is at this location and looks 
                       for (,msdos6)/boot/grub. It also embeds following 
                       components:
                       
                       modules
                       -------------------------------------------------------
                       fshelp ext2 part_msdos biosdisk
                       -------------------------------------------------------
    Operating System:  Debian GNU/Linux 11 (bullseye)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.6 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/extlinux/extlinux.conf 
                       /boot/grub/i386-pc/core.img

sdb8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 20.2
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.6 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb10: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb11: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Debian GNU/Linux 10 (buster)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb12: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdc1: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdc5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdc6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Debian GNU/Linux 10 (buster)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdc7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdc8: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Debian GNU/Linux 10 (buster)
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdc9: __________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        


================================ 13 OS detected ================================

OS#1:   L'OS actuellement utilisé - Ubuntu 20.04.3 LTS CurrentSession on sdb10
OS#2:   Ubuntu 20.04.3 LTS on sda5
OS#3:   Ubuntu 20.04.3 LTS on sda7
OS#4:   OpenMandriva Lx 4.2 (4.2) on sda8
OS#5:   Debian GNU/Linux 11 (bullseye) on sda9
OS#6:   Debian GNU/Linux 10 (buster) on sdb11
OS#7:   Debian GNU/Linux 11 (bullseye) on sdb6
OS#8:   Ubuntu 14.04.6 LTS on sdb7
OS#9:   Linux Mint 20.2 Uma (20.2) on sdb8
OS#10:   Linux Mint 17.1 Rebecca (17.1) on sdb9
OS#11:   Debian GNU/Linux 10 (buster) on sdc6
OS#12:   Ubuntu 20.04.3 LTS on sdc7
OS#13:   MX 19.4 patito feo (19.4 ) on sdc8

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.11.0-44-generic root=UUID=f476fc52-e464-4d30-ac5c-420b46ab208f ro quiet splash


===================================== UEFI =====================================

This installed-session is not in EFI-mode.



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdc	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sdb10	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda5	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda7	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda8	: is-os,	64, apt-get,	no-docgrub,	grub2,	grub2-install,	no-grubenv,	grub2-mkconfig -o /boot/grub,	farbios
sda9	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sda10	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda11	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdb6	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdb7	: is-os,	32, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdb8	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdb9	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdb11	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdb12	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sdc6	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdc7	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdc8	: is-os,	64, apt-get,	grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdc9	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios

Partitions info (2/3): _________________________________________________________

sdb10	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda5	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda7	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda8	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda9	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda10	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda11	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb6	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb7	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb8	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb9	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb11	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb12	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdc6	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdc7	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdc8	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdc9	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sdb10	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda5	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda7	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda8	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda9	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda10	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda11	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sdb6	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdb
sdb7	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdb
sdb8	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdb
sdb9	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdb
sdb11	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sdb12	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sdc6	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdc
sdc7	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	customized,	sdc
sdc8	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdc
sdc9	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdc

fdisk -l (filtered): ___________________________________________________________

Disk sda: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0xf213ef09
      Boot      Start        End    Sectors   Size Id Type
sda1  *          4094 1953523711 1953519618 931.5G  5 Extended
sda5             4096  203170111  203166016  96.9G 83 Linux
sda6       1929019392 1953523711   24504320  11.7G 82 Linux swap / Solaris
sda7        203173888  410021544  206847657  98.6G 83 Linux
sda8        410023936  628760575  218736640 104.3G 83 Linux
sda9        628766720  829005823  200239104  95.5G 83 Linux
sda10       829009920 1038012415  209002496  99.7G 83 Linux
sda11      1038018560 1257205759  219187200 104.5G 83 Linux
Partition table entries are not in disk order.
Disk sdb: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: 0x00020252
      Boot      Start        End    Sectors   Size Id Type
sdb2          7290878 3907028991 3899738114   1.8T  5 Extended
sdb5       3888596992 3907028991   18432000   8.8G 82 Linux swap / Solaris
sdb6          7290880  353456895  346166016 165.1G 83 Linux
sdb7        353460224  675534442  322074219 153.6G 83 Linux
sdb8        694812672  996840015  302027344   144G 83 Linux
sdb9       1002625024 1262882815  260257792 124.1G 83 Linux
sdb10 *    1262886912 1556966990  294080079 140.2G 83 Linux
sdb11      1556971520 1874073599  317102080 151.2G 83 Linux
sdb12      1874079744 2178310143  304230400 145.1G 83 Linux
Partition table entries are not in disk order.
Disk sdc: 931.53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 0x075dd0ff
      Boot      Start        End    Sectors   Size Id Type
sdc1             6142 1953523711 1953517570 931.5G  5 Extended
sdc5       1932566528 1953523711   20957184    10G 83 Linux
sdc6             6144  198752255  198746112  94.8G 83 Linux
sdc7  *     198756352  398772223  200015872  95.4G 83 Linux
sdc8        398776320  604008447  205232128  97.9G 83 Linux
sdc9        604012544  790009855  185997312  88.7G 83 Linux
Partition table entries are not in disk order.

parted -lm (filtered): _________________________________________________________

sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM010-2EP1:;
1:2096kB:1000GB:1000GB:::boot;
5:2097kB:104GB:104GB:ext4::;
7:104GB:210GB:106GB:ext4::;
8:210GB:322GB:112GB:ext4::;
9:322GB:424GB:103GB:ext4::;
10:424GB:531GB:107GB:ext4::;
11:531GB:644GB:112GB:ext4::;
6:988GB:1000GB:12.5GB:linux-swap(v1)::;
sdb:2000GB:scsi:512:4096:msdos:ATA ST2000DM001-1CH1:;
2:3733MB:2000GB:1997GB:::;
6:3733MB:181GB:177GB:ext4::;
7:181GB:346GB:165GB:ext4::;
8:356GB:510GB:155GB:ext4::;
9:513GB:647GB:133GB:ext4::;
10:647GB:797GB:151GB:ext4::boot;
11:797GB:960GB:162GB:ext4::;
12:960GB:1115GB:156GB:ext4::;
5:1991GB:2000GB:9437MB:linux-swap(v1)::;
sdc:1000GB:scsi:512:512:msdos:ST1000DM 003-9YN162:;
1:3145kB:1000GB:1000GB:::;
6:3146kB:102GB:102GB:ext4::;
7:102GB:204GB:102GB:ext4::boot;
8:204GB:309GB:105GB:ext4::;
9:309GB:404GB:95.2GB:ext3::;
5:989GB:1000GB:10.7GB:linux-swap(v1)::;

Free space (filtered): _________________________________________________________

sda:953870MiB:scsi:512:4096:msdos:ATA ST1000DM010-2EP1:;
1:0.00MiB:2.00MiB:2.00MiB:free;
1:99204MiB:99206MiB:1.80MiB:free;
1:200206MiB:200207MiB:1.04MiB:free;
1:307012MiB:307015MiB:2.77MiB:free;
1:404788MiB:404790MiB:1.84MiB:free;
1:506842MiB:506845MiB:2.87MiB:free;
1:613870MiB:941904MiB:328034MiB:free;
1:953869MiB:953870MiB:0.71MiB:free;
sdb:1907729MiB:scsi:512:4096:msdos:ATA ST2000DM001-1CH1:;
1:0.00MiB:3560MiB:3560MiB:free;
1:172586MiB:172588MiB:1.56MiB:free;
1:329851MiB:339264MiB:9413MiB:free;
1:486738MiB:489563MiB:2825MiB:free;
1:616642MiB:616644MiB:1.79MiB:free;
1:760238MiB:760240MiB:2.13MiB:free;
1:915075MiB:915078MiB:2.96MiB:free;
1:1063628MiB:1898729MiB:835101MiB:free;
1:1907729MiB:1907729MiB:0.09MiB:free;
sdc:953870MiB:scsi:512:512:msdos:ST1000DM 003-9YN162:;
1:0.00MiB:3.00MiB:3.00MiB:free;
1:97047MiB:97049MiB:1.92MiB:free;
1:194713MiB:194715MiB:1.91MiB:free;
1:294926MiB:294928MiB:1.92MiB:free;
1:385747MiB:943636MiB:557889MiB:free;
1:953869MiB:953870MiB:0.71MiB:free;

gdisk (filtered): ______________________________________________________________

Found invalid GPT and valid MBR; converting MBR to GPT format
Disk /dev/sda: 1953525168 sectors, 931.5 GiB
Disk identifier (GUID): E7C692A2-0661-4106-8435-436AFC361F66
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 671841668 sectors (320.4 GiB)
Number  Start (sector)    End (sector)  Size       Code  Name
5            4096       203170111   96.9 GiB    8300  Linux filesystem
6      1929019392      1953523711   11.7 GiB    8200  Linux swap
7       203173888       410021544   98.6 GiB    8300  Linux filesystem
8       410023936       628760575   104.3 GiB   8300  Linux filesystem
9       628766720       829005823   95.5 GiB    8300  Linux filesystem
10       829009920      1038012415   99.7 GiB    8300  Linux filesystem
11      1038018560      1257205759   104.5 GiB   8300  Linux filesystem
Found invalid GPT and valid MBR; converting MBR to GPT format
Disk /dev/sdb: 3907029168 sectors, 1.8 TiB
Disk identifier (GUID): B3D47A07-9A3E-4DBD-B3DE-AB3C2BB45575
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 3907029134
Partitions will be aligned on 2048-sector boundaries
Total free space is 1742659171 sectors (831.0 GiB)
Number  Start (sector)    End (sector)  Size       Code  Name
5      3888596992      3907028991   8.8 GiB     8200  Linux swap
6         7290880       353456895   165.1 GiB   8300  Linux filesystem
7       353460224       675534442   153.6 GiB   8300  Linux filesystem
8       694812672       996840015   144.0 GiB   8300  Linux filesystem
9      1002625024      1262882815   124.1 GiB   8300  Linux filesystem
10      1262886912      1556966990   140.2 GiB   8300  Linux filesystem
11      1556971520      1874073599   151.2 GiB   8300  Linux filesystem
12      1874079744      2178310143   145.1 GiB   8300  Linux filesystem
Found invalid GPT and valid MBR; converting MBR to GPT format
Disk /dev/sdc: 1953525168 sectors, 931.5 GiB
Disk identifier (GUID): 30DBE0AE-F2B4-4A45-9AAF-D7B0E06F419B
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 1142576493 sectors (544.8 GiB)
Number  Start (sector)    End (sector)  Size       Code  Name
5      1932566528      1953523711   10.0 GiB    8300  Linux filesystem
6            6144       198752255   94.8 GiB    8300  Linux filesystem
7       198756352       398772223   95.4 GiB    8300  Linux filesystem
8       398776320       604008447   97.9 GiB    8300  Linux filesystem
9       604012544       790009855   88.7 GiB    8300  Linux filesystem

blkid (filtered): ______________________________________________________________

NAME    FSTYPE   UUID                                 PARTUUID                             LABEL            PARTLABEL
sda                                                                                                         
├─sda1                                                f213ef09-01                                           
├─sda5  ext4     1393b1f3-132a-4996-b877-cd775efa9357 f213ef09-05                          UBUNTU 20.04     
├─sda6  swap     d72bf23c-d313-4c27-bf41-581773d13810 f213ef09-06                                           
├─sda7  ext4     9bb25d58-b913-4503-98bf-e14d3760495a f213ef09-07                          VOYAGER 20.04.3  
├─sda8  ext4     1ac0cf0b-ffbc-426d-9aee-05c6d0a43628 f213ef09-08                          OM LX 4.2        
├─sda9  ext4     dc6b6e05-f085-459a-a1b1-fa75f1567a71 f213ef09-09                          DEB. BULLSEYE 11 
├─sda10 ext4     19d62ac5-e64c-4912-8e7b-fbcd5d7b442c f213ef09-0a                                           
└─sda11 ext4     37430b9e-a4f9-4f1c-a74b-e80f8c5aa944 f213ef09-0b                                           
sdb                                                                                                         
├─sdb2                                                00020252-02                                           
├─sdb5  swap     3e41549b-1af2-4cde-bb0d-47f2430c4ad1 00020252-05                                           
├─sdb6  ext4     10d8a257-c8cb-4b25-8c09-f00f7768c663 00020252-06                          EMMA De4 XFCE    
├─sdb7  ext4     f6627d8e-424b-4a1c-8015-cb79af6b40dd 00020252-07                          HYBRYD BIS 14.04 
├─sdb8  ext4     ba9f97cd-36d5-460c-9120-b99d3ffd5896 00020252-08                          LINUX-M XFCE 202 
├─sdb9  ext4     c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 00020252-09                          LINUX-MINT 17.1  
├─sdb10 ext4     f476fc52-e464-4d30-ac5c-420b46ab208f 00020252-0a                          VOYAGER 20.04    
├─sdb11 ext4     f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 00020252-0b                          Q4OS             
└─sdb12 ext4     b8457f3c-79bb-4784-9130-783b44cbd5bc 00020252-0c                                           
sdc                                                                                                         
├─sdc1                                                075dd0ff-01                                           
├─sdc5  swap     03500ce0-c261-4f9d-83ea-6010aa098829 075dd0ff-05                                           
├─sdc6  ext4     92bfd047-7180-41af-8802-46bbb4e1796f 075dd0ff-06                          DEB BUSTER 10    
├─sdc7  ext4     63c698ec-e83f-43c7-9545-719904313a84 075dd0ff-07                          STUDIO-UB.20.04  
├─sdc8  ext4     3493522d-4f1b-4e26-bc46-e5687eeef342 075dd0ff-08                          rootMX19         
└─sdc9  ext3     a7dbd74f-116c-4b4e-ab39-1b19d3bab5f9 075dd0ff-09                                           

df (filtered): _________________________________________________________________

                   Avail Use% Mounted on
sda10              92.6G   0% /media/jibel/19d62ac5-e64c-4912-8e7b-fbcd5d7b442c
sda11              97.1G   0% /mnt/boot-sav/sda11
sda5               73.4G  17% /mnt/boot-sav/sda5
sda7               72.8G  20% /mnt/boot-sav/sda7
sda8                 87G  10% /mnt/boot-sav/sda8
sda9               72.6G  17% /mnt/boot-sav/sda9
sdb10             120.1G   7% /
sdb11             112.7G  19% /mnt/boot-sav/sdb11
sdb12             134.5G   0% /mnt/boot-sav/sdb12
sdb6                106G  29% /mnt/boot-sav/sdb6
sdb7               98.1G  30% /mnt/boot-sav/sdb7
sdb8                117G  12% /mnt/boot-sav/sdb8
sdb9              101.9G  11% /mnt/boot-sav/sdb9
sdc6               41.3G  50% /mnt/boot-sav/sdc6
sdc7                 68G  22% /media/jibel/STUDIO-UB.20.04
sdc8               62.4G  30% /media/jibel/rootMX19
sdc9               82.3G   0% /media/jibel/a7dbd74f-116c-4b4e-ab39-1b19d3bab5f9

Mount options: __________________________________________________________________

sda10             rw,nosuid,nodev,relatime
sda11             rw,relatime
sda5              rw,relatime
sda7              rw,relatime
sda8              rw,relatime,stripe=256
sda9              rw,relatime
sdb10             rw,relatime,errors=remount-ro
sdb11             rw,relatime
sdb12             rw,relatime
sdb6              rw,relatime
sdb7              rw,relatime
sdb8              rw,relatime
sdb9              rw,relatime
sdc6              rw,relatime
sdc7              rw,nosuid,nodev,relatime
sdc8              rw,nosuid,nodev,relatime
sdc9              rw,nosuid,nodev,relatime

====================== sda5/boot/grub/grub.cfg (filtered) ======================

Ubuntu   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-44-generic   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-43-generic   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-44-generic (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-43-generic (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu 20.04.3 LTS (20.04) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-42-generic (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu 20.04.3 LTS (20.04) (sur sda5) (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu (sur sda5) (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-42-generic (sur sda5) (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
OpenMandriva Lx 4.2 (4.2) (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.11.12-desktop-1omv4002 (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.11.12-desktop-1omv4002 (console mode) (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.10.14-desktop-1omv4002 (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.10.14-desktop-1omv4002 (console mode) (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
Debian GNU/Linux 11 (bullseye) (sur sda9)   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux (sur sda9)   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux, with Linux 5.10.0-9-amd64 (sur sda9)   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux, with Linux 5.10.0-8-amd64 (sur sda9)   dc6b6e05-f085-459a-a1b1-fa75f1567a71
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda5/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=1393b1f3-132a-4996-b877-cd775efa9357 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=e1d1ef67-4ad8-4748-b7a3-9d55412b4fae none            swap    sw              0       0

======================= sda5/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda5: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  64.472343445 = 69.226651648   boot/grub/grub.cfg                             5
  70.178535461 = 75.353628672   boot/grub/i386-pc/core.img                     1
  12.176952362 = 13.074903040   boot/vmlinuz                                   1
   3.434764862 = 3.688050688    boot/vmlinuz-5.11.0-42-generic                 1
  10.931636810 = 11.737755648   boot/vmlinuz-5.11.0-43-generic                 2
  12.176952362 = 13.074903040   boot/vmlinuz-5.11.0-44-generic                 1
  10.931636810 = 11.737755648   boot/vmlinuz.old                               2
  12.704532623 = 13.641388032   boot/initrd.img                                2
  12.554508209 = 13.480300544   boot/initrd.img-5.11.0-42-generic              3
  12.635704041 = 13.567483904   boot/initrd.img-5.11.0-43-generic              2
  12.704532623 = 13.641388032   boot/initrd.img-5.11.0-44-generic              2
  12.635704041 = 13.567483904   boot/initrd.img.old                            2

===================== sda5: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18151 aoû 12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 jan 13  2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 jan 13  2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 jan 13  2021 30_os-prober
-rwxr-xr-x 1 root root  1424 jan 13  2021 30_uefi-firmware
-rwxr-xr-x 1 root root   214 jan 13  2021 40_custom
-rwxr-xr-x 1 root root   216 jan 13  2021 41_custom

====================== sda7/boot/grub/grub.cfg (filtered) ======================

Ubuntu   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-44-generic   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-43-generic   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu 20.04.3 LTS (20.04) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-44-generic (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-43-generic (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-44-generic (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-43-generic (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda5) (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda5) (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda5) (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7) (sur sda5)   1393b1f3-132a-4996-b877-cd775efa9357
OpenMandriva Lx 4.2 (4.2) (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.11.12-desktop-1omv4002 (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.11.12-desktop-1omv4002 (console mode) (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.10.14-desktop-1omv4002 (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.10.14-desktop-1omv4002 (console mode) (sur sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
Debian GNU/Linux 11 (bullseye) (sur sda9)   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux (sur sda9)   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux, with Linux 5.10.0-9-amd64 (sur sda9)   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux, with Linux 5.10.0-8-amd64 (sur sda9)   dc6b6e05-f085-459a-a1b1-fa75f1567a71
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda7/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda7 during installation
UUID=9bb25d58-b913-4503-98bf-e14d3760495a /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=d72bf23c-d313-4c27-bf41-581773d13810 none            swap    sw              0       0

======================= sda7/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda7: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 132.508682251 = 142.280114176  boot/grub/grub.cfg                             2
 145.507122040 = 156.237082624  boot/grub/i386-pc/core.img                     1
 116.469921112 = 125.058625536  boot/vmlinuz                                   1
 117.251171112 = 125.897486336  boot/vmlinuz-5.11.0-43-generic                 1
 116.469921112 = 125.058625536  boot/vmlinuz-5.11.0-44-generic                 1
 117.251171112 = 125.897486336  boot/vmlinuz.old                               1
 119.560001373 = 128.376573952  boot/initrd.img                                1
 119.763122559 = 128.594673664  boot/initrd.img-5.11.0-43-generic              2
 119.560001373 = 128.376573952  boot/initrd.img-5.11.0-44-generic              1
 119.763122559 = 128.594673664  boot/initrd.img.old                            2

===================== sda7: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18151 aoû 12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 fév 24  2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 fév 24  2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 fév 24  2021 30_os-prober
-rwxr-xr-x 1 root root  1424 fév 24  2021 30_uefi-firmware
-rwxr-xr-x 1 root root   214 fév 24  2021 40_custom
-rwxr-xr-x 1 root root   216 fév 24  2021 41_custom

===================== sda8/boot/grub2/grub.cfg (filtered) ======================

OpenMandriva Lx   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.11.12-desktop-1omv4002   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.11.12-desktop-1omv4002 (console mode)   gnulinux-5.11.12-desktop-1omv4002-console-1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.10.14-desktop-1omv4002   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.10.14-desktop-1omv4002 (console mode)   gnulinux-5.10.14-desktop-1omv4002-console-1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi_firmware ###

========================== sda8/etc/fstab (filtered) ===========================

# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=1ac0cf0b-ffbc-426d-9aee-05c6d0a43628 /              ext4    defaults,noatime 0 1

======================= sda8/etc/default/grub (filtered) =======================

GRUB_GFXPAYLOAD_LINUX=keep
GRUB_DISABLE_RECOVERY=false
GRUB_DISTRIBUTOR="OpenMandriva Lx"
GRUB_GFXMODE=auto,1680x1050,1360x768,1280x800,1024x768,1024x600,800x600,640x480
GRUB_DEFAULT=saved
GRUB_SAVEDEFAULT=true
GRUB_TIMEOUT="10"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash logo.nologo acpi_osi=Linux acpi_osi='!Windows 2012' acpi_backlight=vendor audit=0 rd.timeout=120 dm_mod.use_blk_mq=1 rd.systemd.show_status=0 systemd.show_status=0"
GRUB_CMDLINE_LINUX_RECOVERY=" failsafe nomodeset xdriver=vesa vga=788 acpi_osi=Linux acpi_osi='!Windows 2012' acpi_backlight=vendor systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M audit=0 rd.timeout=120 "
GRUB_NOECHO="true"

==================== sda8: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 235.653640747 = 253.031170048  boot/grub2/grub.cfg                            1
 264.093692780 = 283.568443392  boot/grub2/i386-pc/core.img                    1
 235.653629303 = 253.031157760  boot/vmlinuz-5.10.14-desktop-1omv4002          1
 235.775482178 = 253.161996288  boot/vmlinuz-5.11.12-desktop-1omv4002          1
 197.688385010 = 212.266287104  boot/initrd-5.10.14-desktop-1omv4002.img       2
 199.735111237 = 214.463942656  boot/initrd-5.11.12-desktop-1omv4002.img       2

===================== sda8: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root    96 fév  7  2021 05_theme
-rwxr-xr-x 1 root root 15504 déc 17  2020 10_linux
-rwxr-xr-x 1 root root 12051 déc 17  2020 20_linux_xen
-rwxr-xr-x 1 root root 11401 déc 17  2020 30_os-prober
-rwxr-xr-x 1 root root  1339 déc 17  2020 30_uefi_firmware
-rwxr-xr-x 1 root root   214 déc 17  2020 40_custom
-rwxr-xr-x 1 root root   216 déc 17  2020 41_custom
-rwxr-xr-x 1 root root  1260 déc 17  2020 90_persistent
-rwxr-xr-x 1 root root  1005 aoû 30  2018 99_rmecho

=========================== sda8/etc/grub.d/05_theme ===========================

#!/bin/sh
set -e
cat << EOF
set color_normal=white/black
set menu_color_normal=white/black
EOF

======================= sda8/etc/grub.d/30_uefi_firmware =======================

#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2012  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
. "${datarootdir}/grub/grub-mkconfig_lib"
efi_vars_dir=/sys/firmware/efi/efivars
EFI_GLOBAL_VARIABLE=8be4df61-93ca-11d2-aa0d-00e098032b8c
OsIndications="$efi_vars_dir/OsIndicationsSupported-$EFI_GLOBAL_VARIABLE"
if [ -e "$OsIndications" ]; then
    LABEL="System setup"
    gettext_printf "Adding boot menu entry for EFI firmware configuration\n" >&2
    onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
cat << EOF
menuentry '$LABEL' \$menuentry_id_option 'uefi-firmware' {
	fwsetup
}
EOF
fi

======================== sda8/etc/grub.d/90_persistent =========================

#! /bin/sh -e
# update-grub helper script.
# Copyright (C) 2008  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
# The output of this script is copied from part of grub.cfg
# that correspond to itself. The achievement is that user can
# modify that part of grub.cfg directly, and it will be persistent
# across update-grub runs.
transform="s&^&&;s,grub,grub2,"
ME=$(echo $0 |sed 's,/,\\/,g')
GRUBCFG=/boot/$(echo grub | sed ${transform})/grub.cfg
# Exit gracefully if there's no configuration file yet
[ -f ${GRUBCFG} ] || exit 0
awk "
	BEGIN {echo = 0}
	/### BEGIN $ME ###/ {echo = 1; next}
	/### END $ME ###/ {echo = 0; next}
	{if (echo) print}
" ${GRUBCFG}

========================== sda8/etc/grub.d/99_rmecho ===========================

#!/bin/bash
argument () {
  opt=$1
  shift
  if test $# -eq 0; then
      exit 1
  fi
  echo $1
}
SCRIPT=$(realpath -s $0)
SCRIPT_ESCAPED=$(echo $SCRIPT|sed -e 's/[\/&]/\\&/g')
PARENT_FULLCMD=$(ps -o args= $PPID)
eval set -- $PARENT_FULLCMD
shift 2
while test $# -gt 0
do
    option=$1
    shift
    case "$option" in
    -o | --output)
        grub_cfg=`argument $option "$@"`; shift;;
    --output=*)
        grub_cfg=`echo "$option" | sed 's/--output=//'`
        ;;
    -*)
        ;;
    esac
done
if test -z "$grub_cfg"
then
    grub_cfg=$(readlink -f /proc/$PPID/fd/1)
fi
. /etc/default/grub
if [ "z$GRUB_NOECHO" = "ztrue" ] && test -f $grub_cfg
then
    echo "Remove echo commands from \"$grub_cfg\"" >&2
    echo "while kill -0 $PPID 2> /dev/null; do sleep 0.2; done;sed -i -E -e '/^\s*echo\s+.*$/d' -e '/^\s*#+\s*BEGIN $SCRIPT_ESCAPED/d' -e '/^\s*#+\s*END $SCRIPT_ESCAPED/d' '$grub_cfg' 2>&1; rm -f /tmp/rmecho.$PPID" >/tmp/rmecho.$PPID
    nohup bash /tmp/rmecho.$PPID >/dev/null 2>&1 &
fi

====================== sda9/boot/grub/grub.cfg (filtered) ======================

Debian GNU/Linux   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux, with Linux 5.10.0-10-amd64   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux, with Linux 5.10.0-9-amd64   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Debian GNU/Linux, with Linux 5.10.0-8-amd64   dc6b6e05-f085-459a-a1b1-fa75f1567a71
Ubuntu 20.04.3 LTS (20.04) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-44-generic (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-43-generic (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-44-generic (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-43-generic (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda5) (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda5) (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda5) (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu, avec Linux 5.11.0-42-generic (sur sda7) (sur sda5) (sur sda7) (sur sda5) (sur sda7) (on sda5)   1393b1f3-132a-4996-b877-cd775efa9357
Ubuntu 20.04.3 LTS (20.04) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-44-generic (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-43-generic (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu 20.04.3 LTS (20.04) (sur sda5) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu (sur sda5) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-44-generic (sur sda5) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-43-generic (sur sda5) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu 20.04.3 LTS (20.04) (sur sda7) (sur sda5) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu (sur sda7) (sur sda5) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-44-generic (sur sda7) (sur sda5) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
Ubuntu, avec Linux 5.11.0-43-generic (sur sda7) (sur sda5) (on sda7)   9bb25d58-b913-4503-98bf-e14d3760495a
OpenMandriva Lx 4.2 (4.2) (on sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx (on sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.11.12-desktop-1omv4002 (on sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.11.12-desktop-1omv4002 (console mode) (on sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.10.14-desktop-1omv4002 (on sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
OpenMandriva Lx, with Linux 5.10.14-desktop-1omv4002 (console mode) (on sda8)   1ac0cf0b-ffbc-426d-9aee-05c6d0a43628
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda9/etc/fstab (filtered) ===========================

# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=dc6b6e05-f085-459a-a1b1-fa75f1567a71 /              ext4    defaults,noatime 0 1

======================= sda9/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda9: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 349.997158051 = 375.806586880  boot/grub/grub.cfg                             2
 310.058513641 = 332.922793984  boot/grub/i386-pc/core.img                     1
 316.462425232 = 339.798941696  boot/vmlinuz-5.10.0-10-amd64                   2
 303.485843658 = 325.865443328  boot/vmlinuz-5.10.0-8-amd64                    1
 307.661636353 = 330.349166592  boot/vmlinuz-5.10.0-9-amd64                    1
 316.462425232 = 339.798941696  vmlinuz                                        2
 307.661636353 = 330.349166592  vmlinuz.old                                    1
 317.063995361 = 340.444872704  boot/initrd.img-5.10.0-10-amd64                1
 309.688972473 = 332.526002176  boot/initrd.img-5.10.0-8-amd64                 2
 310.993671417 = 333.926912000  boot/initrd.img-5.10.0-9-amd64                 1
 317.063995361 = 340.444872704  initrd.img                                     1
 310.993671417 = 333.926912000  initrd.img.old                                 1

===================== sda9: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 13664 jui 11 01:37 10_linux
-rwxr-xr-x 1 root root 13726 jui 11 01:37 20_linux_xen
-rwxr-xr-x 1 root root 12059 jui 11 01:37 30_os-prober
-rwxr-xr-x 1 root root  1416 jui 11 01:37 30_uefi-firmware
-rwxr-xr-x 1 root root   214 jui 11 01:37 40_custom
-rwxr-xr-x 1 root root   216 jui 11 01:37 41_custom

====================== sdb6/boot/grub/grub.cfg (filtered) ======================

Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-10-amd64   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-9-amd64   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-8-amd64   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-7-amd64   10d8a257-c8cb-4b25-8c09-f00f7768c663
Ubuntu 20.04.3 LTS (20.04) (on sda10)   e10a0f7b-b94b-4be1-9ede-b1c736ddf4af
Ubuntu (on sda10)   e10a0f7b-b94b-4be1-9ede-b1c736ddf4af
Ubuntu, avec Linux 5.11.0-44-generic (on sda10)   e10a0f7b-b94b-4be1-9ede-b1c736ddf4af
Ubuntu, avec Linux 5.11.0-42-generic (on sda10)   e10a0f7b-b94b-4be1-9ede-b1c736ddf4af
Debian GNU/Linux 10 (buster) (on sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   osprober-gnulinux-/boot/vmlinuz-4.19.0-18-amd64-root=UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 ro single-f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   osprober-gnulinux-/boot/vmlinuz-4.19.0-17-amd64-root=UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 ro single-f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Ubuntu 14.04.6 LTS (14.04) (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-170-generic (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-24-generic (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Linux Mint 20.2 Uma (20.2) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-91-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-90-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-89-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-88-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-74-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu 20.04.3 LTS (20.04) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-90-generic (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-89-generic (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Uma (20.2) (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-90-generic (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-89-generic (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu 20.04.3 LTS (20.04) (sur sda10) (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu (sur sda10) (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-89-generic (sur sda10) (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 17.1 Rebecca (17.1) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) -- recovery mode (on sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) -- recovery mode (on sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-37-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 (Mode for black screen problem)

========================== sdb6/etc/fstab (filtered) ===========================

# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=10d8a257-c8cb-4b25-8c09-f00f7768c663 /              ext4    defaults,noatime 0 1
# swap was on during /dev/sda5 post-installation
UUID=3e41549b-1af2-4cde-bb0d-47f2430c4ad1 none            swap    sw              0       0

======================= sdb6/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="Debian GNU/Linux 11 - Emmabuntus Debian Edition 4"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_GFXMODE=1024x768
GRUB_DISABLE_OS_PROBER=false

==================== sdb6: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  23.603683472 = 25.344262144   boot/grub/grub.cfg                             1
  11.847114563 = 12.720742400   boot/grub/i386-pc/core.img                     1
 153.041526794 = 164.327088128  boot/vmlinuz-5.10.0-10-amd64                   1
  25.123535156 = 26.976190464   boot/vmlinuz-5.10.0-7-amd64                    1
  19.062496185 = 20.468199424   boot/vmlinuz-5.10.0-8-amd64                    2
  18.354019165 = 19.707478016   boot/vmlinuz-5.10.0-9-amd64                    2
 153.041526794 = 164.327088128  vmlinuz                                        1
  18.354019165 = 19.707478016   vmlinuz.old                                    2
 154.123256683 = 165.488586752  boot/initrd.img-5.10.0-10-amd64                2
  19.334159851 = 20.759896064   boot/initrd.img-5.10.0-7-amd64                 1
  29.162296295 = 31.312777216   boot/initrd.img-5.10.0-8-amd64                 3
  30.687496185 = 32.950448128   boot/initrd.img-5.10.0-9-amd64                 4
 154.123256683 = 165.488586752  initrd.img                                     2
  30.687496185 = 32.950448128   initrd.img.old                                 4

===================== sdb6: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 13664 déc 16  2019 10_linux
-rwxr-xr-x 1 root root 13726 nov  8  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 déc 16  2019 30_os-prober
-rwxr-xr-x 1 root root  1416 fév  8  2021 30_uefi-firmware
-rwxr-xr-x 1 root root   560 avr  2  2020 40_custom
-rwxr-xr-x 1 root root   216 déc 16  2019 41_custom

========================== sdb6/etc/grub.d/40_custom ===========================

#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
menuentry "Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 (Mode for black screen problem)" {
    savedefault
    insmod ext2
    insmod part_msdos
    set root='hd0,msdos1'
    echo "Load Emmabuntus Debian Edition 4"
    linux /vmlinuz root=/dev/sda1 ro quiet splash nomodeset $vt_handoff
    echo "Load initrd.img"
    initrd /initrd.img
}

====================== sdb7/boot/grub/grub.cfg (filtered) ======================

Ubuntu   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-170-generic   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-24-generic   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu 20.04.3 LTS (20.04) (on sda10)   f476fc52-e464-4d30-ac5c-420b46ab208f
Ubuntu (on sda10)   f476fc52-e464-4d30-ac5c-420b46ab208f
Ubuntu, avec Linux 5.11.0-44-generic (on sda10)   f476fc52-e464-4d30-ac5c-420b46ab208f
Ubuntu, avec Linux 5.8.0-45-generic (on sda10)   f476fc52-e464-4d30-ac5c-420b46ab208f
Debian GNU/Linux (10.11) (on sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   osprober-gnulinux-/boot/vmlinuz-4.19.0-18-amd64-root=UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 ro single-f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (on sda11)   osprober-gnulinux-/boot/vmlinuz-4.19.0-17-amd64-root=UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 ro single-f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Debian GNU/Linux (11.2) (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-10-amd64 (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-9-amd64 (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-8-amd64 (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-7-amd64 (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 (Mode for black screen problem) (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Linux Mint 20.2 Uma (20.2) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-91-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-90-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-89-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-88-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-74-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu 20.04.3 LTS (20.04) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-90-generic (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-89-generic (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Uma (20.2) (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-90-generic (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-89-generic (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu 20.04.3 LTS (20.04) (sur sda10) (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu (sur sda10) (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-89-generic (sur sda10) (sur sda8) (sur sda10) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 17.1 Rebecca (17.1) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) -- recovery mode (on sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) -- recovery mode (on sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-37-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb7/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda7 during installation
UUID=f6627d8e-424b-4a1c-8015-cb79af6b40dd /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=c2cad8f3-9c86-488f-bfaf-b81cb42028e2 none            swap    sw              0       0

======================= sdb7/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_BACKGROUND="/etc/remastersys/grub.jpg"#GRUB_DISABLE_OS_PROBER=false

================= sdb7/boot/extlinux/extlinux.conf (filtered) ==================

default l0
prompt 1
timeout 50
include themes/debian/theme.cfg

==================== sdb7: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 192.677219391 = 206.885588992  boot/grub/grub.cfg                             1
 192.779964447 = 206.995910656  boot/grub/i386-pc/core.img                     1
 179.259418488 = 192.478334976  boot/vmlinuz-3.13.0-170-generic                2
 192.686462402 = 206.895513600  boot/vmlinuz-3.13.0-24-generic                 1
 179.259418488 = 192.478334976  vmlinuz                                        2
 192.686462402 = 206.895513600  vmlinuz.old                                    1
 173.371089935 = 186.155790336  boot/initrd.img-3.13.0-170-generic             4
 179.039058685 = 192.241725440  boot/initrd.img-3.13.0-24-generic              5
 173.371089935 = 186.155790336  initrd.img                                     4
 179.039058685 = 192.241725440  initrd.img.old                                 5

================== sdb7: Location of files loaded by Syslinux ==================

           GiB - GB             File                                 Fragment(s)
 196.669559479 = 211.172331520  boot/extlinux/extlinux.conf                    1
 196.669631958 = 211.172409344  boot/extlinux/chain.c32                        1

=============== sdb7: Version of COM32(R) files used by Syslinux ===============

 boot/extlinux/chain.c32            :  COM32R module (v4.xx)

===================== sdb7: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 11608 avr 11  2014 10_linux
-rwxr-xr-x 1 root root 10412 avr 11  2014 20_linux_xen
-rwxr-xr-x 1 root root 11692 avr 11  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 mar 22  2019 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avr  9  2013 40_custom
-rwxr-xr-x 1 root root   216 avr  9  2013 41_custom

====================== sdb8/boot/grub/grub.cfg (filtered) ======================

Linux Mint 20.2 Xfce   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-91-generic   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-90-generic   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-89-generic   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-88-generic   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-74-generic   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu 20.04.3 LTS (20.04) (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu, avec Linux 5.4.0-90-generic (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu, avec Linux 5.4.0-89-generic (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu, avec Linux 5.4.0-86-generic (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Linux Mint 20.2 Uma (20.2) (sur sda8) (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Linux Mint 20.2 Xfce (sur sda8) (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Linux Mint 20.2 Xfce, avec Linux 5.4.0-90-generic (sur sda8) (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Linux Mint 20.2 Xfce, avec Linux 5.4.0-89-generic (sur sda8) (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu 20.04.3 LTS (20.04) (sur sda10) (sur sda8) (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu (sur sda10) (sur sda8) (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu, avec Linux 5.4.0-89-generic (sur sda10) (sur sda8) (sur sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Debian GNU/Linux 10 (buster) (sur sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   osprober-gnulinux-/boot/vmlinuz-4.19.0-18-amd64-root=UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 ro single-f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   osprober-gnulinux-/boot/vmlinuz-4.19.0-17-amd64-root=UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 ro single-f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Debian GNU/Linux 11 (bullseye) (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-9-amd64 (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-8-amd64 (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-7-amd64 (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 (Mode for black screen problem) (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Ubuntu 14.04.6 LTS (14.04) (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-170-generic (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-24-generic (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Linux Mint 17.1 Rebecca (17.1) (sur sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) (sur sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) -- recovery mode (sur sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) (sur sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) -- recovery mode (sur sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-37-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb8/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda8 during installation
UUID=ba9f97cd-36d5-460c-9120-b99d3ffd5896 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=3e41549b-1af2-4cde-bb0d-47f2430c4ad1 none            swap    sw              0       0

======================= sdb8/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false

==================== sdb8: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 407.443420410 = 437.489041408  boot/grub/grub.cfg                             1
 343.667713165 = 369.010397184  boot/grub/i386-pc/core.img                     1
 337.589099884 = 362.483535872  boot/vmlinuz                                   1
 333.664058685 = 358.269054976  boot/vmlinuz-5.4.0-74-generic                  2
 345.112529755 = 370.561757184  boot/vmlinuz-5.4.0-88-generic                  1
 348.038314819 = 373.703294976  boot/vmlinuz-5.4.0-89-generic                  1
 352.003158569 = 377.960513536  boot/vmlinuz-5.4.0-90-generic                  2
 337.589099884 = 362.483535872  boot/vmlinuz-5.4.0-91-generic                  1
 352.003158569 = 377.960513536  boot/vmlinuz.old                               2
 341.855377197 = 367.064416256  boot/initrd.img                                2
 342.191299438 = 367.425110016  boot/initrd.img-5.4.0-74-generic               2
 342.105373383 = 367.332847616  boot/initrd.img-5.4.0-88-generic               1
 342.023345947 = 367.244771328  boot/initrd.img-5.4.0-89-generic               1
 341.941314697 = 367.156690944  boot/initrd.img-5.4.0-90-generic               2
 341.855377197 = 367.064416256  boot/initrd.img-5.4.0-91-generic               2
 341.941314697 = 367.156690944  boot/initrd.img.old                            2

===================== sdb8: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18151 aoû 12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 mai 20  2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 mai 20  2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 mai 20  2021 30_os-prober
-rwxr-xr-x 1 root root  1424 mai 20  2021 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mai 20  2021 40_custom
-rwxr-xr-x 1 root root   216 mai 20  2021 41_custom

====================== sdb9/boot/grub/grub.cfg (filtered) ======================

Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9)
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) -- recovery mode    recovery mode
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9)
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) -- recovery mode    recovery mode
Ubuntu 20.04.1 LTS (20.04) (on sda6)   a1ed00f2-e846-464f-9015-92a7136c2eaf
Ubuntu (on sda6)   a1ed00f2-e846-464f-9015-92a7136c2eaf
Ubuntu, avec Linux 5.4.0-47-generic (on sda6)   a1ed00f2-e846-464f-9015-92a7136c2eaf
Ubuntu, avec Linux 5.4.0-46-generic (on sda6)   a1ed00f2-e846-464f-9015-92a7136c2eaf
Ubuntu, avec Linux 5.4.0-44-generic (on sda6)   a1ed00f2-e846-464f-9015-92a7136c2eaf
Linux Mint 20 Ulyana (20) (sur sda8) (on sda6)   a1ed00f2-e846-464f-9015-92a7136c2eaf
Linux Mint 20 Xfce (sur sda8) (on sda6)   a1ed00f2-e846-464f-9015-92a7136c2eaf
Linux Mint 20 Xfce, with Linux 5.4.0-47-generic (sur sda8) (on sda6)   a1ed00f2-e846-464f-9015-92a7136c2eaf
Ubuntu 14.04.6 LTS (14.04) (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-170-generic (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-24-generic (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Linux Mint 20 Ulyana (20) (on sda8)   aea47314-98bf-43cf-9270-123d81afc1a1
Linux Mint 20 Xfce (on sda8)   aea47314-98bf-43cf-9270-123d81afc1a1
Linux Mint 20 Xfce, with Linux 5.4.0-47-generic (on sda8)   aea47314-98bf-43cf-9270-123d81afc1a1
Linux Mint 20 Xfce, with Linux 5.4.0-45-generic (on sda8)   aea47314-98bf-43cf-9270-123d81afc1a1
Linux Mint 20 Xfce, with Linux 5.4.0-42-generic (on sda8)   aea47314-98bf-43cf-9270-123d81afc1a1
Linux Mint 20 Xfce, with Linux 5.4.0-26-generic (on sda8)   aea47314-98bf-43cf-9270-123d81afc1a1
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb9/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda9 during installation
UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=c2cad8f3-9c86-488f-bfaf-b81cb42028e2 none            swap    sw              0       0

======================= sdb9/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false

==================== sdb9: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 522.224239349 = 560.734007296  boot/grub/grub.cfg                             1
 564.340755463 = 605.956272128  boot/grub/i386-pc/core.img                     1
 483.578742981 = 519.238721536  boot/vmlinuz-3.13.0-170-generic                1
 522.224182129 = 560.733945856  boot/vmlinuz-3.13.0-37-generic                 1
 483.578742981 = 519.238721536  vmlinuz                                        1
 522.224182129 = 560.733945856  vmlinuz.old                                    1
 568.677288055 = 610.612588544  boot/initrd.img-3.13.0-170-generic             2
 485.970279694 = 521.806614528  boot/initrd.img-3.13.0-37-generic              2
 568.677288055 = 610.612588544  initrd.img                                     2
 485.970279694 = 521.806614528  initrd.img.old                                 2

===================== sdb9: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root  1180 oct 25  2014 06_mint_theme
-rwxr-xr-x 1 root root  7500 déc 29 16:00 10_linux
-rwxr-xr-x 1 root root 10412 mai 15  2014 20_linux_xen
-rwxr-xr-x 1 root root 11692 mai 15  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 mar 22  2019 30_uefi-firmware
-rwxr-xr-x 1 root root   214 mai 15  2014 40_custom
-rwxr-xr-x 1 root root   216 mai 15  2014 41_custom

======================== sdb9/etc/grub.d/06_mint_theme =========================

#!/bin/sh
set -e
. /usr/lib/grub/grub-mkconfig_lib
set_mono_theme()
{
  cat << EOF
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
EOF
}
# check for usable backgrounds
use_bg=false
#if [ "$GRUB_TERMINAL_OUTPUT" = "gfxterm" ] ; then
#  for i in {/boot/grub,/usr/share/images/desktop-base}/linuxmint.{png,tga} ; do
#    if is_path_readable_by_grub $i ; then 
#      bg=$i
#      case ${bg} in
#        *.png)		reader=png ;;
#        *.tga)		reader=tga ;;
#        *.jpg|*.jpeg)	reader=jpeg ;;
#      esac
#      if test -e /boot/grub/${reader}.mod ; then
#        echo "Found Debian background: `basename ${bg}`" >&2
#        #use_bg=true
#        break
#      fi
#    fi
#  done
#fi
# set the background if possible
#if ${use_bg} ; then
#  prepare_grub_to_access_device `${grub_probe} --target=device ${bg}`
#  cat << EOF
#insmod ${reader}
#if background_image `make_system_path_relative_to_its_root ${bg}` ; then
#  set color_normal=white/black
#  set color_highlight=white/light-gray
#else
#EOF
#fi
# otherwise, set a monochromatic theme for Ubuntu
#if ${use_bg} ; then
#  set_mono_theme | sed -e "s/^/  /g"
#  echo "fi"
#else
set_mono_theme
#fi

===================== sdb10/boot/grub/grub.cfg (filtered) ======================

Ubuntu   f476fc52-e464-4d30-ac5c-420b46ab208f
Ubuntu, avec Linux 5.11.0-44-generic   f476fc52-e464-4d30-ac5c-420b46ab208f
Ubuntu, avec Linux 5.8.0-45-generic   f476fc52-e464-4d30-ac5c-420b46ab208f
Debian GNU/Linux 10 (buster) (sur sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   osprober-gnulinux-/boot/vmlinuz-4.19.0-18-amd64-root=UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 ro single-f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15  (sur sda11)   osprober-gnulinux-/boot/vmlinuz-4.19.0-17-amd64-root=UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 ro single-f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Debian GNU/Linux 11 (bullseye) (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-10-amd64 (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-9-amd64 (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-8-amd64 (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-7-amd64 (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 (Mode for black screen problem) (sur sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Ubuntu 14.04.6 LTS (14.04) (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, avec Linux 3.13.0-170-generic (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, avec Linux 3.13.0-24-generic (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 (Mode for black screen problem) (sur sda6) (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Linux Mint 17.1 Rebecca (17.1) (sur sda9) (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) (sur sda9) (sur sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) -- recovery mode (sur sda9) (sur sda7)   osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-f6627d8e-424b-4a1c-8015-cb79af6b40dd
Linux Mint 20.2 Uma (20.2) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-91-generic (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-90-generic (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-89-generic (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-88-generic (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-74-generic (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu 20.04.3 LTS (20.04) (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-90-generic (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-89-generic (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Uma (20.2) (sur sda8) (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce (sur sda8) (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-90-generic (sur sda8) (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-89-generic (sur sda8) (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu 20.04.3 LTS (20.04) (sur sda10) (sur sda8) (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu (sur sda10) (sur sda8) (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Ubuntu, avec Linux 5.4.0-89-generic (sur sda10) (sur sda8) (sur sda10) (sur sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 17.1 Rebecca (17.1) (sur sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) (sur sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) -- recovery mode (sur sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) (sur sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) -- recovery mode (sur sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-37-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb10/etc/fstab (filtered) ==========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda10 during installation
UUID=f476fc52-e464-4d30-ac5c-420b46ab208f /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=3e41549b-1af2-4cde-bb0d-47f2430c4ad1 none            swap    sw              0       0

====================== sdb10/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false

=================== sdb10: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 722.322360992 = 775.587729408  boot/grub/grub.cfg                             1
 680.367767334 = 730.539327488  boot/grub/i386-pc/core.img                     1
 605.686717987 = 650.351161344  boot/vmlinuz                                   1
 605.686717987 = 650.351161344  boot/vmlinuz-5.11.0-44-generic                 1
 604.355464935 = 648.921739264  boot/vmlinuz-5.8.0-45-generic                  2
 604.355464935 = 648.921739264  boot/vmlinuz.old                               2
 717.698669434 = 770.623078400  boot/initrd.img                                5
 717.698669434 = 770.623078400  boot/initrd.img-5.11.0-44-generic              5
 717.468311310 = 770.375733248  boot/initrd.img-5.8.0-45-generic               2
 717.468311310 = 770.375733248  boot/initrd.img.old                            2

===================== sdb10: ls -l /etc/grub.d/ (filtered) =====================

-rwxr-xr-x 1 root root 18151 aoû 12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 fév 24  2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 fév 24  2021 20_linux_xen
-rwxr-xr-x 1 root root 12059 fév 24  2021 30_os-prober
-rwxr-xr-x 1 root root  1424 fév 24  2021 30_uefi-firmware
-rwxr-xr-x 1 root root   214 fév 24  2021 40_custom
-rwxr-xr-x 1 root root   216 fév 24  2021 41_custom

===================== sdb11/boot/grub/grub.cfg (filtered) ======================

Q4OS Desktop 3.15 '''Centaurus'''   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15 '''Centaurus''   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Q4OS Desktop 3.15 '''Centaurus''   f9b7ffee-e04f-4884-8120-1ecddf9b2dd5
Ubuntu 20.04.3 LTS (20.04) (on sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu (on sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu, avec Linux 5.4.0-88-generic (on sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Ubuntu, avec Linux 5.4.0-86-generic (on sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Linux Mint 20.2 Uma (20.2) (sur sda8) (on sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Linux Mint 20.2 Xfce (sur sda8) (on sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Linux Mint 20.2 Xfce, avec Linux 5.4.0-88-generic (sur sda8) (on sda10)   7109e180-f5b1-4511-b47c-fcc24f72819f
Debian GNU/Linux 11 (bullseye) (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-9-amd64 (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-8-amd64 (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 GNU/Linux, with Linux 5.10.0-7-amd64 (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Debian GNU/Linux 11 - Emmabuntus Debian Edition 4 (Mode for black screen problem) (on sda6)   10d8a257-c8cb-4b25-8c09-f00f7768c663
Ubuntu 14.04.6 LTS (14.04) (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-170-generic (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Ubuntu, with Linux 3.13.0-24-generic (on sda7)   f6627d8e-424b-4a1c-8015-cb79af6b40dd
Linux Mint 20.2 Uma (20.2) (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-88-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 20.2 Xfce, avec Linux 5.4.0-74-generic (on sda8)   ba9f97cd-36d5-460c-9120-b99d3ffd5896
Linux Mint 17.1 Rebecca (17.1) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-170-generic (sda9) -- recovery mode (on sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-170-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) (on sda9)   c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
Linux Mint 17.1 KDE 64-bit, 3.13.0-37-generic (sda9) -- recovery mode (on sda9)   osprober-gnulinux-/boot/vmlinuz-3.13.0-37-generic-root=UUID=c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4 ro recovery nomodeset-c3c86bb1-dde8-466a-9840-cf7e8d1b4cc4
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb11/etc/fstab (filtered) ==========================

# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=f9b7ffee-e04f-4884-8120-1ecddf9b2dd5 /              ext4    defaults,noatime 0 1
UUID=3e41549b-1af2-4cde-bb0d-47f2430c4ad1 swap           swap    defaults,noatime 0 2

====================== sdb11/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="Q4OS Desktop `get-q4os-version | awk -F '.' '{ print $1"."$2 }'` 'Centaurus'"
GRUB_CMDLINE_LINUX_DEFAULT="quiet resume=UUID=3e41549b-1af2-4cde-bb0d-47f2430c4ad1 loglevel=3 systemd.log_color=0 systemd.show_status=1"
GRUB_CMDLINE_LINUX=""
GRUB_TERMINAL=console
GRUB_DISABLE_OS_PROBER=false

=================== sdb11: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 830.547603607 = 891.793698816  boot/grub/grub.cfg                             1
 830.597652435 = 891.847438336  boot/grub/i386-pc/core.img                     1
 767.598670959 = 824.202797056  boot/vmlinuz-4.19.0-17-amd64                   1
 769.247112274 = 825.972797440  boot/vmlinuz-4.19.0-18-amd64                   1
 769.247112274 = 825.972797440  vmlinuz                                        1
 767.598670959 = 824.202797056  vmlinuz.old                                    1
 768.464641571 = 825.132625920  boot/initrd.img-4.19.0-17-amd64                3
 769.929420471 = 826.705420288  boot/initrd.img-4.19.0-18-amd64                2
 769.929420471 = 826.705420288  initrd.img                                     2
 768.464641571 = 825.132625920  initrd.img.old                                 3

===================== sdb11: ls -l /etc/grub.d/ (filtered) =====================

-rwxr-xr-x 1 root root 12536 déc  8  2020 10_linux
-rwxr-xr-x 1 root root 11497 jui 30  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 jui 30  2020 30_os-prober
-rwxr-xr-x 1 root root  1589 déc  8  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 jui 30  2020 40_custom
-rwxr-xr-x 1 root root   216 jui 30  2020 41_custom

====================== sdc6/boot/grub/grub.cfg (filtered) ======================

Debian GNU/Linux   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux, with Linux 4.19.0-18-amd64   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux, with Linux 4.19.0-17-amd64   92bfd047-7180-41af-8802-46bbb4e1796f
Ubuntu 20.04.3 LTS (20.04) (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu (lowlatency) (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-91-lowlatency (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-90-lowlatency (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-89-lowlatency (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-42-lowlatency (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
MX 19.4 patito feo (19.4 ) (on sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo (on sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-18-amd64 (on sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-18-amd64 (systemd) (on sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-17-amd64 (on sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-17-amd64 (systemd) (on sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-16-amd64 (on sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-16-amd64 (systemd) (on sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdc6/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda10 during installation
UUID=92bfd047-7180-41af-8802-46bbb4e1796f /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=03500ce0-c261-4f9d-83ea-6010aa098829 none            swap    sw              0       0
/dev/sr1        /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/sr0        /media/cdrom1   udf,iso9660 user,noauto     0       0

======================= sdc6/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""

==================== sdc6: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  38.134731293 = 40.946855936   boot/grub/grub.cfg                             1
  38.493751526 = 41.332350976   boot/grub/i386-pc/core.img                     1
  31.707069397 = 34.045206528   boot/vmlinuz-4.19.0-17-amd64                   2
   6.886760712 = 7.394603008    boot/vmlinuz-4.19.0-18-amd64                   2
   6.886760712 = 7.394603008    vmlinuz                                        2
  31.707069397 = 34.045206528   vmlinuz.old                                    2
  29.219055176 = 31.373721600   boot/initrd.img-4.19.0-17-amd64                5
   7.763256073 = 8.335732736    boot/initrd.img-4.19.0-18-amd64                1
   7.763256073 = 8.335732736    initrd.img                                     1
  29.219055176 = 31.373721600   initrd.img.old                                 5

===================== sdc6: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 12444 jun 25  2019 10_linux
-rwxr-xr-x 1 root root 11497 jun 25  2019 20_linux_xen
-rwxr-xr-x 1 root root 12059 jun 25  2019 30_os-prober
-rwxr-xr-x 1 root root  1418 jun 25  2019 30_uefi-firmware
-rwxr-xr-x 1 root root   214 jun 25  2019 40_custom
-rwxr-xr-x 1 root root   216 jun 25  2019 41_custom

====================== sdc7/boot/grub/grub.cfg (filtered) ======================

Ubuntu (lowlatency)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-91-lowlatency   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-90-lowlatency   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-89-lowlatency   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-42-lowlatency   63c698ec-e83f-43c7-9545-719904313a84
Debian GNU/Linux 10 (buster) (sur sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux (sur sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux, with Linux 4.19.0-18-amd64 (sur sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux, with Linux 4.19.0-17-amd64 (sur sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
MX 19.4 patito feo (19.4 ) (sur sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo (sur sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-18-amd64 (sur sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-18-amd64 (systemd) (sur sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-17-amd64 (sur sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-17-amd64 (systemd) (sur sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-16-amd64 (sur sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-16-amd64 (systemd) (sur sda8)   3493522d-4f1b-4e26-bc46-e5687eeef342
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdc7/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda9 during installation
UUID=63c698ec-e83f-43c7-9545-719904313a84 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=03500ce0-c261-4f9d-83ea-6010aa098829 none            swap    sw              0       0

======================= sdc7/etc/default/grub (filtered) =======================

GRUB_DEFAULT="0"
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_DISABLE_OS_PROBER=false

==================== sdc7: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 166.900352478 = 179.207888896  boot/grub/grub.cfg                             1
 166.903839111 = 179.211632640  boot/grub/i386-pc/core.img                     1
 105.754188538 = 113.552695296  boot/vmlinuz                                   1
  99.305660248 = 106.628640768  boot/vmlinuz-5.4.0-42-lowlatency               2
 103.625972748 = 111.267540992  boot/vmlinuz-5.4.0-89-lowlatency               2
 109.926059723 = 118.032207872  boot/vmlinuz-5.4.0-90-lowlatency               1
 105.754188538 = 113.552695296  boot/vmlinuz-5.4.0-91-lowlatency               1
 109.926059723 = 118.032207872  boot/vmlinuz.old                               1
 106.305660248 = 114.144833536  boot/initrd.img                                3
 106.141597748 = 113.968672768  boot/initrd.img-5.4.0-42-lowlatency            8
 106.031879425 = 113.850863616  boot/initrd.img-5.4.0-89-lowlatency            5
 104.839874268 = 112.570957824  boot/initrd.img-5.4.0-90-lowlatency            6
 106.305660248 = 114.144833536  boot/initrd.img-5.4.0-91-lowlatency            3
 104.839874268 = 112.570957824  boot/initrd.img.old                            6

===================== sdc7: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 15823 mar 29  2020 09_lowlatency
-rw-r--r-- 1 root root 18151 aoû 12 11:18 10_linux
-rwxr-xr-x 1 root root 42359 fév 12  2021 10_linux_zfs
-rwxr-xr-x 1 root root 12894 jui 31  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 jui 31  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 jui 31  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 jui 31  2020 40_custom
-rwxr-xr-x 1 root root   216 jui 31  2020 41_custom
drwxr-xr-x 4 root root  4096 avr  4  2021 backup
drwxr-xr-x 2 root root  4096 avr  4  2021 proxifiedScripts

======================== sdc7/etc/grub.d/09_lowlatency =========================

#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
#
# Ubuntustudio customization that keeps the latest lowlatency kernel
# as the first menu item and default boot even if there is a newer
# generic or other kernel. Often the updated generic kernel is
# released a few days earlier than the lowlatency kernel
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="1"
quiet_boot="1"
quick_boot="1"
gfxpayload_dynamic="1"
vt_handoff="1"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
# only 09_lowlatency or 10_linux should run, since we got this far
# 10_linux should not run next
if [ -x /etc/grub.d/10_linux ]; then
  chmod -x /etc/grub.d/10_linux
fi
CLASS="--class gnu-linux --class gnu --class os"
SUPPORTED_INITS="sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
  OS=GNU/Linux
else
  case ${GRUB_DISTRIBUTOR} in
    Ubuntu|Kubuntu)
      OS="${GRUB_DISTRIBUTOR}"
      ;;
    *)
      OS="${GRUB_DISTRIBUTOR} GNU/Linux"
      ;;
  esac
  CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
  /dev/loop/*|/dev/loop[0-9])
    GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
    # We can't cope with devices loop-mounted from files here.
    case ${GRUB_DEVICE} in
      /dev/*) ;;
      *) exit 0 ;;
    esac
  ;;
esac
# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if [ "x${GRUB_DEVICE_UUID}" = "x" ] || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
    || ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
    || ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
  LINUX_ROOT_DEVICE=${GRUB_DEVICE}
else
  LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
case x"$GRUB_FS" in
    xbtrfs)
	rootsubvol="`make_system_path_relative_to_its_root /`"
	rootsubvol="${rootsubvol#/}"
	if [ "x${rootsubvol}" != x ]; then
	    GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
	fi;;
    xzfs)
	rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
	bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
	LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
	;;
esac
title_correction_code=
if [ -x /lib/recovery-mode/recovery-menu ]; then
    GRUB_CMDLINE_LINUX_RECOVERY=recovery
else
    GRUB_CMDLINE_LINUX_RECOVERY=single
fi
if [ "$ubuntu_recovery" = 1 ]; then
    GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY nomodeset"
fi
if [ "$vt_handoff" = 1 ]; then
  for word in $GRUB_CMDLINE_LINUX_DEFAULT; do
    if [ "$word" = splash ]; then
      GRUB_CMDLINE_LINUX_DEFAULT="$GRUB_CMDLINE_LINUX_DEFAULT \$vt_handoff"
    fi
  done
fi
if [ x"$GRUB_FORCE_PARTUUID" != x ]; then
   echo "set partuuid=${GRUB_FORCE_PARTUUID}"
fi
linux_entry ()
{
  os="$1"
  version="$2"
  type="$3"
  args="$4"
  if [ -z "$boot_device_id" ]; then
      boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
  fi
  if [ x$type != xsimple ] ; then
      case $type in
	  recovery)
	      title="$(gettext_printf "%s, with Linux %s (%s)" "${os}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")" ;;
	  init-*)
	      title="$(gettext_printf "%s, with Linux %s (%s)" "${os}" "${version}" "${type#init-}")" ;;
	  *)
	      title="$(gettext_printf "%s, with Linux %s" "${os}" "${version}")" ;;
      esac
      if [ x"$title" = x"$GRUB_ACTUAL_DEFAULT" ] || [ x"Previous Linux versions>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
	  replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
	  quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
	  title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
	  grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
      fi
      echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
  else
      echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
  fi      
  if [ "$quick_boot" = 1 ]; then
      echo "	recordfail" | sed "s/^/$submenu_indentation/"
  fi
  if [ x$type != xrecovery ] ; then
      save_default_entry | grub_add_tab
  fi
  # Use ELILO's generic "efifb" when it's known to be available.
  # FIXME: We need an interface to select vesafb in case efifb can't be used.
  if [ "x$GRUB_GFXPAYLOAD_LINUX" = x ]; then
      echo "	load_video" | sed "s/^/$submenu_indentation/"
  else
      if [ "x$GRUB_GFXPAYLOAD_LINUX" != xtext ]; then
	  echo "	load_video" | sed "s/^/$submenu_indentation/"
      fi
  fi
  if ([ "$ubuntu_recovery" = 0 ] || [ x$type != xrecovery ]) && \
     ([ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 1 ]); then
      echo "	gfxmode \$linux_gfx_mode" | sed "s/^/$submenu_indentation/"
  fi
  echo "	insmod gzio" | sed "s/^/$submenu_indentation/"
  echo "	if [ x\$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi" | sed "s/^/$submenu_indentation/"
  if [ x$dirname = x/ ]; then
    if [ -z "${prepare_root_cache}" ]; then
      prepare_root_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE} | grub_add_tab)"
    fi
    printf '%s\n' "${prepare_root_cache}" | sed "s/^/$submenu_indentation/"
  else
    if [ -z "${prepare_boot_cache}" ]; then
      prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
    fi
    printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
  fi
  if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
    message="$(gettext_printf "Loading Linux %s ..." ${version})"
    sed "s/^/$submenu_indentation/" << EOF
	echo	'$(echo "$message" | grub_quote)'
EOF
  fi
  if test -d /sys/firmware/efi && test -e "${linux}.efi.signed"; then
    sed "s/^/$submenu_indentation/" << EOF
	linux	${rel_dirname}/${basename}.efi.signed root=${linux_root_device_thisversion} ro ${args}
EOF
  else
    # We have initrd and PARTUUID is set - we try to boot without initrd, and fallback to using it
    # if it fails.
    # "panic=-1" means "on panic reboot immediately". "panic=0" disables the reboot behavior.
    if [ x"$GRUB_FORCE_PARTUUID" != x ]; then
        linux_root_device_thisversion="PARTUUID=${GRUB_FORCE_PARTUUID}"
    fi
    message="$(gettext_printf "Loading initial ramdisk ...")"
    if test -n "${initrd}" && [ x"$GRUB_FORCE_PARTUUID" != x ]; then
        sed "s/^/$submenu_indentation/" << EOF
	if [ "\${initrdfail}" = 1 ]; then
	  linux	${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}
EOF
        if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
          sed "s/^/$submenu_indentation/" << EOF
	  echo	'$(echo "$message" | grub_quote)'
EOF
        fi
        sed "s/^/$submenu_indentation/" << EOF
	  initrd	${rel_dirname}/${initrd}
	else
	  linux	${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args} panic=-1
	fi
	initrdfail
EOF
    else
    # We don't have initrd or we don't want to set PARTUUID. Don't try initrd-less boot with fallback.
        sed "s/^/$submenu_indentation/" << EOF
	linux	${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}
EOF
        if test -n "${initrd}"; then
            # We do have initrd - let's use it at boot.
            # TRANSLATORS: ramdisk isn't identifier. Should be translated.
            if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
              sed "s/^/$submenu_indentation/" << EOF
	echo	'$(echo "$message" | grub_quote)'
EOF
            fi
            sed "s/^/$submenu_indentation/" << EOF
	initrd	${rel_dirname}/${initrd}
EOF
        fi
    fi
  fi
  sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
machine=`uname -m`
case "x$machine" in
    xi?86 | xx86_64)
	list=
	for i in /boot/vmlinuz-*lowlatency /vmlinuz-*lowlatency /boot/kernel-*lowlatency ; do
	    if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
	done
	list2=
	for i in /boot/vmlinuz-*generic /vmlinuz-*generic /boot/kernel-*generic ; do
	    if grub_file_is_not_garbage "$i" ; then list2="$list2 $i" ; fi
	done ;;
    *) 
	list=
	for i in /boot/vmlinuz-*lowlatency /boot/vmlinux-*lowlatency /vmlinuz-*lowlatency /vmlinux-*lowlatency /boot/kernel-*lowlatency ; do
                  if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
	done
	list2=
	for i in /boot/vmlinuz-*generic /boot/vmlinux-*generic /vmlinuz-*generic /vmlinux-*generic /boot/kernel-*generic ; do
                  if grub_file_is_not_garbage "$i" ; then list2="$list2 $i" ; fi
	done ;;
esac
case "$machine" in
    i?86) GENKERNEL_ARCH="x86" ;;
    mips|mips64) GENKERNEL_ARCH="mips" ;;
    mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
    arm*) GENKERNEL_ARCH="arm" ;;
    *) GENKERNEL_ARCH="$machine" ;;
esac
prepare_boot_cache=
prepare_root_cache=
boot_device_id=
title_correction_code=
cat << 'EOF'
function gfxmode {
	set gfxpayload="${1}"
EOF
if [ "$vt_handoff" = 1 ]; then
  cat << 'EOF'
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
EOF
fi
cat << EOF
}
EOF
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 0 ]; then
  echo "set linux_gfx_mode=$GRUB_GFXPAYLOAD_LINUX"
else
  cat << EOF
if [ "\${recordfail}" != 1 ]; then
  if [ -e \${prefix}/gfxblacklist.txt ]; then
    if hwmatch \${prefix}/gfxblacklist.txt 3; then
      if [ \${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""
is_top_level=true
is_generic_top=true
if  [ "x$list" = "x" ]; then
  is_top_level=false
  generic_is_default=true
fi
if  [ "x$list2" = "x" ]; then
  is_generic_top=false
fi
while [ "x$list $list2" != "x" ] ; do
  if [ "x$is_generic_top" = xtrue ] && [ "x$is_top_level" != xtrue ]; then
    linux=`version_find_latest $list2`
    case $linux in
      *.efi.signed)
        # We handle these in linux_entry.
        list2=`echo $list2 | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
        continue
        ;;
    esac
  else
    linux=`version_find_latest $list`
    if [ "x$linux" = "x" ]; then
      break
    fi
    case $linux in
      *.efi.signed)
        # We handle these in linux_entry.
        list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
        continue
        ;;
    esac
  fi
  gettext_printf "Found linux image: %s\n" "$linux" >&2
  basename=`basename $linux`
  dirname=`dirname $linux`
  rel_dirname=`make_system_path_relative_to_its_root $dirname`
  version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
  alt_version=`echo $version | sed -e "s,\.old$,,g"`
  linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
  initrd=
  for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
	   "initrd-${version}" "initramfs-${version}.img" \
	   "initrd.img-${alt_version}" "initrd-${alt_version}.img" \
	   "initrd-${alt_version}" "initramfs-${alt_version}.img" \
	   "initramfs-genkernel-${version}" \
	   "initramfs-genkernel-${alt_version}" \
	   "initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
	   "initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
    if test -e "${dirname}/${i}" ; then
      initrd="$i"
      break
    fi
  done
  config=
  for i in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
    if test -e "${i}" ; then
      config="${i}"
      break
    fi
  done
  initramfs=
  if test -n "${config}" ; then
      initramfs=`grep CONFIG_INITRAMFS_SOURCE= "${config}" | cut -f2 -d= | tr -d \"`
  fi
  if test -n "${initrd}" ; then
    gettext_printf "Found initrd image: %s\n" "${dirname}/${initrd}" >&2
  elif test -z "${initramfs}" ; then
    # "UUID=" and "ZFS=" magic is parsed by initrd or initramfs.  Since there's
    # no initrd or builtin initramfs, it can't work here.
    linux_root_device_thisversion=${GRUB_DEVICE}
  fi
  if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
    linux_entry "${OS} (lowlatency)" "${version}" simple \
    "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
    if [ -z "$boot_device_id" ]; then
	boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
    fi
    if [ "x$is_generic_top" != xtrue ]; then
    submenu_indentation="$grub_tab"
    # TRANSLATORS: %s is replaced with an OS name
    echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
    fi
    is_top_level=false
    continue
  fi
  if [ "x$is_generic_top" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
    linux_entry "${OS} (generic)" "${version}" simple \
    "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
    submenu_indentation="$grub_tab"
    list="$list $list2"
    if [ -z "$boot_device_id" ]; then
	boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
    fi
    # TRANSLATORS: %s is replaced with an OS name
    echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
    is_generic_top=false
    continue
  fi
  linux_entry "${OS}" "${version}" advanced \
              "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
  for supported_init in ${SUPPORTED_INITS}; do
    init_path="${supported_init#*:}"
    if [ -x "${init_path}" ] && [ "$(readlink -f /sbin/init)" != "$(readlink -f "${init_path}")" ]; then
      linux_entry "${OS}" "${version}" "init-${supported_init%%:*}" \
		  "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}"
    fi
  done
  if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
    linux_entry "${OS}" "${version}" recovery \
                "${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
  fi
  list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
done
# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
  echo '}'
fi
echo "$title_correction_code"

====================== sdc8/boot/grub/grub.cfg (filtered) ======================

MX 19.4 patito feo   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-18-amd64   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-18-amd64 (systemd)   gnulinux-4.19.0-18-amd64-init-systemd-3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-17-amd64   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-17-amd64 (systemd)   gnulinux-4.19.0-17-amd64-init-systemd-3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-16-amd64   3493522d-4f1b-4e26-bc46-e5687eeef342
MX 19.4 patito feo, with Linux 4.19.0-16-amd64 (systemd)   gnulinux-4.19.0-16-amd64-init-systemd-3493522d-4f1b-4e26-bc46-e5687eeef342
Debian GNU/Linux 10 (buster) (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux, avec Linux 4.19.0-18-amd64 (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux, avec Linux 4.19.0-17-amd64 (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
Debian GNU/Linux, avec Linux 4.19.0-16-amd64 (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
MX 19.4 patito feo (19.4 ) (sur sda8) (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
MX 19.4 patito feo (sur sda8) (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
MX 19.4 patito feo, with Linux 4.19.0-17-amd64 (sur sda8) (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
MX 19.4 patito feo, with Linux 4.19.0-17-amd64 (systemd) (sur sda8) (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
MX 19.4 patito feo, with Linux 4.19.0-16-amd64 (sur sda8) (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
MX 19.4 patito feo, with Linux 4.19.0-16-amd64 (systemd) (sur sda8) (on sda6)   92bfd047-7180-41af-8802-46bbb4e1796f
Ubuntu 20.04.3 LTS (20.04) (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu (lowlatency) (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-88-lowlatency (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-84-lowlatency (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
Ubuntu, avec Linux 5.4.0-42-lowlatency (on sda7)   63c698ec-e83f-43c7-9545-719904313a84
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdc8/etc/fstab (filtered) ===========================

UUID=3493522d-4f1b-4e26-bc46-e5687eeef342 / ext4 defaults 1 1
UUID=03500ce0-c261-4f9d-83ea-6010aa098829 swap swap defaults 0 0

======================= sdc8/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR="$(unset PRETTY_NAME; (. /etc/lsb-release; echo ${PRETTY_NAME:?}) 2>/dev/null || echo Debian)"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_GFXMODE=1024x768
GRUB_DISABLE_OS_PROBER=false
GRUB_THEME="/boot/grub/themes/linen/theme.txt"

==================== sdc8: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
 206.450191498 = 221.674205184  boot/grub/grub.cfg                             1
 241.075893402 = 258.853269504  boot/grub/i386-pc/core.img                     1
 190.350582123 = 204.387381248  boot/vmlinuz-4.19.0-16-amd64                   2
 203.875038147 = 218.909155328  boot/vmlinuz-4.19.0-17-amd64                   1
 207.019573212 = 222.285574144  boot/vmlinuz-4.19.0-18-amd64                   1
 207.019573212 = 222.285574144  vmlinuz                                        1
 203.875038147 = 218.909155328  vmlinuz.old                                    1
 195.646137238 = 210.073440256  boot/initrd.img-4.19.0-16-amd64                3
 195.547794342 = 209.967845376  boot/initrd.img-4.19.0-16-amd64.old-dkms       3
 210.447341919 = 225.966112768  boot/initrd.img-4.19.0-17-amd64                1
 195.727481842 = 210.160783360  boot/initrd.img-4.19.0-17-amd64.old-dkms       1
 193.087970734 = 207.326629888  boot/initrd.img-4.19.0-18-amd64                4
 193.087970734 = 207.326629888  initrd.img                                     4
 210.447341919 = 225.966112768  initrd.img.old                                 1

===================== sdc8: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 13658 mai 16  2021 10_linux
-rwxr-xr-x 1 root root 13726 aoû  5  2020 20_linux_xen
-rwxr-xr-x 1 root root 12162 mai 16  2021 30_os-prober
-rwxr-xr-x 1 root root  1594 mai 16  2021 30_uefi-firmware
-rwxr-xr-x 1 root root   214 aoû  5  2020 40_custom
-rwxr-xr-x 1 root root   216 aoû  5  2020 41_custom


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sdb2

00000000  80 33 e9 c6 ab 44 60 79  c4 e0 f8 7b 24 7b cc af  |.3...D`y...{${..|
00000010  dc 42 fd 71 7c 45 93 65  68 ca c1 49 e9 5e ab b9  |.B.q|E.eh..I.^..|
00000020  40 a8 a2 48 7a 1e da f6  56 a4 0e 56 c5 2e c2 7f  |@..Hz...V..V....|
00000030  08 00 2c 26 0a 6f 18 fd  1a 38 c1 4e b5 6d d0 37  |..,&.o...8.N.m.7|
00000040  41 35 27 87 99 26 9a d2  bb e5 70 3d ec 62 74 07  |A5'..&....p=.bt.|
00000050  02 6e 2b 8f 0b ad 20 60  b8 3c 11 62 f6 05 85 49  |.n+... `.<.b...I|
00000060  5b 20 a4 f5 42 0e 75 59  35 3d 69 e5 c4 71 76 1e  |[ ..B.uY5=i..qv.|
00000070  1c b2 27 d3 94 60 09 ee  34 7a aa 53 1d e8 e3 83  |..'..`..4z.S....|
00000080  89 e8 82 d6 84 2a b5 3a  50 b9 ad 5a 42 fc 0d 06  |.....*.:P..ZB...|
00000090  5d 65 34 4a 1d ec b9 8c  47 8e 18 56 9f f4 ef 0d  |]e4J....G..V....|
000000a0  cf 58 d9 55 bd 5d 3d c8  09 8c c5 c1 a0 7f 9f c6  |.X.U.]=.........|
000000b0  ba 70 39 4d be 9a 25 a5  0d 26 e3 d9 29 af e6 03  |.p9M..%..&..)...|
000000c0  e4 ff 42 bc 45 4b fa 73  3a 33 e2 c8 b8 fa 2e fa  |..B.EK.s:3......|
000000d0  5a 7f 00 4f a6 57 ca 8a  33 ef e8 00 0b 26 da fa  |Z..O.W..3....&..|
000000e0  ab 2f a5 87 65 e2 24 fb  cd 58 88 5b 3e 52 ca 1e  |./..e.$..X.[>R..|
000000f0  e7 fa a4 4b e3 f4 20 a4  0f 40 ae bd e8 65 10 78  |...K.. ..@...e.x|
00000100  53 71 d4 27 b7 de eb 62  a4 59 5e 46 dc 55 22 bc  |Sq.'...b.Y^F.U".|
00000110  30 c5 59 ea ce 71 90 13  fa 73 9b b0 de 85 b1 35  |0.Y..q...s.....5|
00000120  61 e4 48 29 04 7e 90 c9  75 c5 13 72 1a 14 17 fd  |a.H).~..u..r....|
00000130  db bf ba 0e 9d ba 8b 3e  9a 69 47 0f 08 b2 2e cf  |.......>.iG.....|
00000140  fe 9c 6e b1 b2 3d 95 1b  e1 16 d4 1b af c0 0d 4c  |..n..=.........L|
00000150  c4 8b f9 b2 b2 55 f8 a7  2d cb 3a 91 1b e7 bb de  |.....U..-.:.....|
00000160  6b 59 8e ba 7b 16 df 80  5a a4 cb 51 55 e7 1b ad  |kY..{...Z..QU...|
00000170  f8 8d b5 58 48 88 eb 26  72 41 42 e3 87 76 fc 12  |...XH..&rAB..v..|
00000180  40 df 5b fa b0 47 a8 b1  82 0b af 15 ea 10 6a 2c  |@.[..G........j,|
00000190  a2 fe 80 e2 4a d4 de 7b  21 61 26 1e db 7e 4a 34  |....J..{!a&..~J4|
000001a0  78 52 94 ec cd 87 fa c5  1a 54 5f da a2 50 12 3a  |xR.......T_..P.:|
000001b0  37 54 2c d1 76 3a b8 df  51 44 3c d7 81 e6 00 fe  |7T,.v:..QD<.....|
000001c0  ff ff 82 fe ff ff 02 08  58 e7 00 40 19 01 00 fe  |........X..@....|
000001d0  c2 ff 05 fe c2 ff 01 00  00 00 01 13 a2 14 00 00  |................|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


================================= User choice ==================================

Is sda (ATA ST1000DM010-2EP1) a removable disk? no



Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub2 of
sdb10 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because no ESP detected.
Additional repair would be performed: unhide-bootmenu-10s      

Final advice in case of suggested repair: ______________________________________


Please do not forget to make your BIOS boot on sda (ATA ST1000DM010-2EP1) disk!

Bien sur , je n'ai que des OSs libres , Merci Mr R. Stallman   ;-)

Dernière modification par jibel (Le 30/12/2021, à 18:59)


Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur. Elles doivent être reproduites et même corrigées sans l'accord préalable du susdit et toc !

Mint 17.1,Voyager20.04,Emmabuntus 1.Buster, Debian 10.buster, Hybryde 14.04, Pas d'OS intermédiaire ! PC Medion AKOYA  DD 1T + 2 .

Hors ligne

#2222 Le 30/12/2021, à 18:49

Babdu89

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

Bonjour.
@YannUbuntu.
Tests avec 4ppa146.
Machine un SSD interne, partitionnement en MSDos /dev/sda, /dev/sda1 Windows7, /dev/sda2 Ubuntu 20.04
Un Hdd USB, partitionnement en MSDos /dev/sdb /dev/sdb1 Ubuntu20.04
Tests en sessions installés et session live le PPA à jour.
Constats;

Aussi bien en installé et session live, bien qu'il y ait deux disques dans visibles pour les tests.
boot-info   boot-repair   ne demandent plus si tel disque est un disque amovible.

Réparation recommandée, confirmé en passant par les "Options avancées".
En installé il est proposé de réinstaller grub comme ceci;

Lancé depuis /dev/sda interne, réinstallation de grub dans /dev/sda2 en mettant grub première partie dans le secteur de boot de /dev/sda. Il n'est plus proposé de le mettre dans l'autre disque /dev/sdb. OK! c'est bon.

Lancé depuis /dev/sdb externe, réinstallation de grub dans /dev/sdb1 en mettant grub première partie dans le secteur de boot de /dev/sdb. Il n'est plus proposé de le mettre dans l'autre disque /dev/sda  OK c'est bon.

Dans les options avancées on peut aussi restaurer un MBR Windows. OK c'est bon.


Alors en session live problèmes!!.

Session live BRD (DVD)  lancée PPA à jour (4ppa146).

boot-info fait en live.
La réparation recommandée propose de restaurer un MBR Windows  généric dans /dev/sda pour faire démarrer la Windows7 installé en /dev/sda1 ???. Je ne me souviens plus si c'était comme ça avant...

boot-repair lancé en live.

Dans les "Options avancées"  "Options principales"  "Restaurer le MBR"  est coché par défaut.
Même en cochant "Réinstaller grub"  On ne peut plus utiliser " Emplacement de grub" et "Options de grub".

Le boot info de la session live;

 boot-repair-4ppa146                                              [20211230_1626]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos2)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 20.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sdb2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Unknown
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        


================================ 3 OS detected =================================

OS#1:   Windows 7 on sda1
OS#2:   Ubuntu 20.04.3 LTS on sda2
OS#3:   Ubuntu 20.04.3 LTS on sdb1

================================ Host/Hardware =================================

CPU architecture: 64-bit
Video: CoreProcessorIntegratedGraphicsController from   Intel Corporation
Live-session OS is Ubuntu 64-bit (Boot-Repair-Disk 64bit 20200604, bionic, x86_64)


===================================== UEFI =====================================

This live-session is not in EFI-mode.



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	has-win,	2048 sectors * 512 bytes
sdb	: notGPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	no-wind,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: is-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sda2	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdb1	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	farbios
sdb2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios

Partitions info (2/3): _________________________________________________________

sda1	: isnotESP,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot
sda2	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb1	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sdb2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda1	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda2	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sdb1	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdb
sdb2	: not-sepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sdb

fdisk -l (filtered): ___________________________________________________________

Disk sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Disk identifier: 0x00040603
      Boot    Start       End   Sectors  Size Id Type
sda1  *        2048  56383487  56381440 26.9G  7 HPFS/NTFS/exFAT
sda2       56383488 234440703 178057216 84.9G 83 Linux
Disk zram0: 466.9 MiB, 489603072 bytes, 119532 sectors
Disk zram1: 466.9 MiB, 489603072 bytes, 119532 sectors
Disk zram2: 466.9 MiB, 489603072 bytes, 119532 sectors
Disk zram3: 466.9 MiB, 489603072 bytes, 119532 sectors
Disk sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0x22213cf5
      Boot     Start       End   Sectors   Size Id Type
sdb1            2048 248102911 248100864 118.3G 83 Linux
sdb2       248102912 976773119 728670208 347.5G  7 HPFS/NTFS/exFAT

parted -lm (filtered): _________________________________________________________

sda:120GB:scsi:512:512:msdos:ATA LDLC:;
1:1049kB:28.9GB:28.9GB:ntfs::boot;
2:28.9GB:120GB:91.2GB:ext4::;
sdb:500GB:scsi:512:512:msdos:Samsung Portable SSD T5:;
1:1049kB:127GB:127GB:ext4::;
2:127GB:500GB:373GB:ntfs::;
zram3:490MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:490MB:490MB:linux-swap(v1)::;
zram1:490MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:490MB:490MB:linux-swap(v1)::;
sr0:923MB:scsi:2048:2048:msdos:TSSTcorp DVD+-RW TS-U633J:;
2:1974kB:12.1MB:10.1MB:::esp;
zram2:490MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:490MB:490MB:linux-swap(v1)::;
zram0:490MB:unknown:4096:4096:loop:Unknown:;
1:0.00B:490MB:490MB:linux-swap(v1)::;

Free space (filtered): _________________________________________________________

sda:114473MiB:scsi:512:512:msdos:ATA LDLC:;
1:0.03MiB:1.00MiB:0.97MiB:free;
1:114473MiB:114473MiB:0.46MiB:free;
sdb:476940MiB:scsi:512:512:msdos:Samsung Portable SSD T5:;
1:0.03MiB:1.00MiB:0.97MiB:free;
1:476940MiB:476940MiB:0.02MiB:free;

gdisk (filtered): ______________________________________________________________

Found invalid GPT and valid MBR; converting MBR to GPT format
Disk /dev/sda: 234441648 sectors, 111.8 GiB
Disk identifier (GUID): 0DCFADE1-6A3E-43E8-B849-69DBEFE10013
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 234441614
Partitions will be aligned on 2048-sector boundaries
Total free space is 2925 sectors (1.4 MiB)
Number  Start (sector)    End (sector)  Size       Code  Name
1            2048        56383487   26.9 GiB    0700  Microsoft basic data
2        56383488       234440703   84.9 GiB    8300  Linux filesystem
Found invalid GPT and valid MBR; converting MBR to GPT format
Disk /dev/sdb: 976773168 sectors, 465.8 GiB
Disk identifier (GUID): 7BAF8C43-6E70-4827-B67D-DAEB94B00F21
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 2048-sector boundaries
Total free space is 2029 sectors (1014.5 KiB)
Number  Start (sector)    End (sector)  Size       Code  Name
1            2048       248102911   118.3 GiB   8300  Linux filesystem
2       248102912       976773119   347.5 GiB   0700  Microsoft basic data

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL                  PARTLABEL
sda                                                                                                              
├─sda1 ntfs     FA2AC6152AC5CF37                     00040603-01                          windows-7-del          
└─sda2 ext4     9f5305b9-ddf9-4400-838d-7bb99f8b492f 00040603-02                          ubuntu20.04-dell       
sdb                                                                                                              
├─sdb1 ext4     03f8c549-fab7-4c74-8046-5f71e0d97cb8 22213cf5-01                          copy-sys               
└─sdb2 ntfs     306B597A62652B56                     22213cf5-02                          data-T5                
zram0                                                                                                            
zram1                                                                                                            
zram2                                                                                                            
zram3                                                                                                            

df (filtered): _________________________________________________________________

        Avail Use% Mounted on
sda1     2.9G  89% /media/lubuntu/windows-7-del
sda2       6G  88% /media/lubuntu/ubuntu20.04-dell
sdb1    34.2G  65% /media/lubuntu/copy-sys
sdb2   148.3G  57% /media/lubuntu/data-T5

Mount options: __________________________________________________________________

sda1   rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096
sda2   rw,nosuid,nodev,relatime
sdb1   rw,nosuid,nodev,relatime,stripe=8191
sdb2   rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096

====================== sda2/boot/grub/grub.cfg (filtered) ======================

Ubuntu   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu, avec Linux 5.11.0-43-generic   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu, avec Linux 5.11.0-41-generic   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Windows 7 (sur sda1)   FA2AC6152AC5CF37
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda2/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb16 during installation
UUID=9f5305b9-ddf9-4400-838d-7bb99f8b492f /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdc6 during installation
/file.swap none swap sw 0 0

======================= sda2/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sda2: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  61.620223999 = 66.164211712   boot/grub/grub.cfg                             1
  32.926273346 = 35.354316800   boot/grub/i386-pc/core.img                     1
  74.490428925 = 79.983489024   boot/vmlinuz                                   2
  52.940639496 = 56.844578816   boot/vmlinuz-5.11.0-41-generic                 2
  74.490428925 = 79.983489024   boot/vmlinuz-5.11.0-43-generic                 2
  52.940639496 = 56.844578816   boot/vmlinuz.old                               2
  67.377925873 = 72.346497024   boot/initrd.img                               12
  84.648162842 = 90.890272768   boot/initrd.img-5.11.0-41-generic             13
  67.377925873 = 72.346497024   boot/initrd.img-5.11.0-43-generic             12
  84.648162842 = 90.890272768   boot/initrd.img.old                           13

===================== sda2: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18151 août  12 09:18 10_linux
-rwxr-xr-x 1 root root 42359 août  17  2020 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom

====================== sdb1/boot/grub/grub.cfg (filtered) ======================

Ubuntu   03f8c549-fab7-4c74-8046-5f71e0d97cb8
Ubuntu, avec Linux 5.11.0-43-generic   03f8c549-fab7-4c74-8046-5f71e0d97cb8
Ubuntu, avec Linux 5.11.0-41-generic   03f8c549-fab7-4c74-8046-5f71e0d97cb8
Windows 7 (sur sda1)   FA2AC6152AC5CF37
Ubuntu 20.04.3 LTS (20.04) (sur sda2)   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu (sur sda2)   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu, avec Linux 5.11.0-43-generic (sur sda2)   9f5305b9-ddf9-4400-838d-7bb99f8b492f
Ubuntu, avec Linux 5.11.0-41-generic (sur sda2)   9f5305b9-ddf9-4400-838d-7bb99f8b492f
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb1/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb16 during installation
UUID=03f8c549-fab7-4c74-8046-5f71e0d97cb8  /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdc6 during installation
/file.swap none swap sw 0 0

======================= sdb1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

==================== sdb1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  72.173370361 = 77.495566336   boot/grub/grub.cfg                             3
  72.680606842 = 78.040207360   boot/grub/i386-pc/core.img                     1
  74.316600800 = 79.796842496   boot/vmlinuz                                   2
  73.910350800 = 79.360634880   boot/vmlinuz-5.11.0-41-generic                 1
  74.316600800 = 79.796842496   boot/vmlinuz-5.11.0-43-generic                 2
  73.910350800 = 79.360634880   boot/vmlinuz.old                               1
  88.094020844 = 94.590234624   boot/initrd.img                                5
  88.089366913 = 94.585237504   boot/initrd.img-5.11.0-41-generic              4
  88.094020844 = 94.590234624   boot/initrd.img-5.11.0-43-generic              5
  88.089366913 = 94.585237504   boot/initrd.img.old                            4

===================== sdb1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18151 août  12 09:18 10_linux
-rwxr-xr-x 1 root root 42359 août  17  2020 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom


======================== Unknown MBRs/Boot Sectors/etc =========================

Unknown BootLoader on sdb2

00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 c0 c9 0e  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 9f 6e 2b 00 00 00 00  |..........n+....|
00000030  04 00 00 00 00 00 00 00  ff e9 b6 02 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  56 2b 65 62 7a 59 6b 30  |........V+ebzYk0|
00000050  00 00 00 00 0e 1f be 71  7c ac 22 c0 74 0b 56 b4  |.......q|.".t.V.|
00000060  0e bb 07 00 cd 10 5e eb  f0 32 e4 cd 16 cd 19 eb  |......^..2......|
00000070  fe 54 68 69 73 20 69 73  20 6e 6f 74 20 61 20 62  |.This is not a b|
00000080  6f 6f 74 61 62 6c 65 20  64 69 73 6b 2e 20 50 6c  |ootable disk. Pl|
00000090  65 61 73 65 20 69 6e 73  65 72 74 20 61 20 62 6f  |ease insert a bo|
000000a0  6f 74 61 62 6c 65 20 66  6c 6f 70 70 79 20 61 6e  |otable floppy an|
000000b0  64 0d 0a 70 72 65 73 73  20 61 6e 79 20 6b 65 79  |d..press any key|
000000c0  20 74 6f 20 74 72 79 20  61 67 61 69 6e 20 2e 2e  | to try again ..|
000000d0  2e 20 0d 0a 00 00 00 00  00 00 00 00 00 00 00 00  |. ..............|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200




Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would restore the [(generic mbr)] MBR in sda, and make it boot on sda1.
Additional repair would be performed: unhide-bootmenu-10s      

Le log de boot-repair en session live;

  SET@_label0.set_text('''Détection des systèmes. Cela peut prendre plusieurs minutes...''')
/usr/share/boot-sav/gui-actions-grub.sh: ligne 661: erreur de syntaxe près du symbole inattendu « } »
/usr/share/boot-sav/gui-actions-grub.sh: ligne 661: `}'
SET@_label0.set_text('''Détection des systèmes (os-prober). Cela peut prendre plusieurs minutes...''')
SET@_label0.set_text('''Détection des systèmes (BIOS-session). Cela peut prendre plusieurs minutes...''')
SET@_label0.set_text('''Détection des systèmes (BIOS-session). Cela peut prendre plusieurs minutes...''')
SET@_label0.set_text('''Détection des systèmes (BIOS-session). Veuillez patienter quelques secondes...''')
SET@_vbox_bootrepairmenu.show()
SET@_label_bootrepairsubtitle.set_markup('''<b>Réparer le démarrage de l'ordinateur</b>''')
SET@_label_recommendedrepair.set_text('''Réparation recommandée\n(répare les problèmes les plus fréquents)''')
SET@_label_justbootinfo.set_text('''Créer un rapport BootInfo\n(pour se faire aider par courriel ou forum)''')
SET@_label_pastebin.set_text('''Créer un rapport BootInfo (pour se faire aider par courriel ou forum)''')
SET@_vbox_pastebin.show()
SET@_label_appname.set_markup('''<b><big>Boot-Repair</big></b>''')
SET@_label_appdescription.set_text('''Réparer le démarrage de l'ordinateur''')
SET@_logobr.show()
SET@_logo_brmenu.show()
SET@_linkbutton_websitebr.show()
SET@_label_repairfilesystems.set_text('''Réparer les systèmes de fichier''')
SET@_checkbutton_repairfilesystems.show()
SET@_label_wubi.set_text('''Réparer les systèmes de fichier Wubi''')
SET@_checkbutton_wubi.show()
SET@_mainwindow.set_title('''Réparateur de démarrage''')
SET@_mainwindow.set_icon_from_file('''x-boot-repair.png''')
SET@_label_advanced_options.set_text('''Options avancées''')
SET@_tab_main_options.set_text('''Options principales''')
SET@_tab_grub_location.set_text('''Emplacement de GRUB''')
SET@_tab_grub_options.set_text('''Options de GRUB''')
SET@_tab_mbr_options.set_text('''Options de MBR''')
SET@_tab_other_options.set_text('''Autres options''')
SET@_label_unhide_boot_menu.set_text('''Faire apparaitre le menu de démarrage :''')
SET@_label_seconds.set_text('''secondes''')
SET@_label_reinstall_grub.set_text('''Réinstaller GRUB''')
SET@_label_restore_mbr.set_text('''Restaurer le MBR''')
SET@_label_restore_bkp.set_text('''Restaurer les sauvegardes EFI''')
SET@_label_create_bkp.set_text('''Utiliser le fichier EFI standard''')
SET@_label_winefi_bkp.set_text('''Sauvegarder et renommer les fichiers EFI Windows (résout l'erreur [hard-coded-EFI])''')
SET@_label_bootflag.set_text('''Placer le drapeau de démarrage sur :''')
SET@_label_ostoboot_bydefault.set_text('''OS par défaut au démarrage :''')
SET@_label_signed.set_text('''SecureBoot''')
SET@_label_purge_grub.set_text('''Purger GRUB avant de le réinstaller''')
SET@_label_separateboot.set_text('''Partition /boot séparée :''')
SET@_label_efi.set_text('''Partition /boot/efi séparée :''')
SET@_label_sepusr.set_text('''Partition /usr séparée :''')
SET@_label_place_alldisks.set_text('''Placer GRUB dans tous les disques (sauf disques USB sans OS)''')
SET@_label_place_grub.set_text('''Placer GRUB dans :''')
SET@_label_lastgrub.set_text('''Mettre à niveau GRUB vers sa version la plus récente''')
SET@_label_legacy.set_text('''GRUB Legacy''')
SET@_label_blankextraspace.set_text('''Effacer l'espace libre après MBR (résout l'erreur [FlexNet])''')
SET@_label_uncomment_gfxmode.set_text('''Décommenter GRUB_GFXMODE (résout l'erreur [no-signal / out-of-range])''')
SET@_label_ata.set_text('''Support disque ATA (résout l'erreur [out-of-disk])''')
SET@_label_add_kernel_option.set_text('''Ajouter une option au noyau :''')
COMBO@@END@@_combobox_add_kernel_option@@nomodeset
COMBO@@END@@_combobox_add_kernel_option@@acpi=off
COMBO@@END@@_combobox_add_kernel_option@@acpi_osi=
COMBO@@END@@_combobox_add_kernel_option@@edd=on
COMBO@@END@@_combobox_add_kernel_option@@i815modeset=1
COMBO@@END@@_combobox_add_kernel_option@@i915modeset=0
COMBO@@END@@_combobox_add_kernel_option@@i915.modeset=0 xforcevesa
COMBO@@END@@_combobox_add_kernel_option@@noapic
COMBO@@END@@_combobox_add_kernel_option@@nodmraid
COMBO@@END@@_combobox_add_kernel_option@@nolapic
COMBO@@END@@_combobox_add_kernel_option@@nomodeset radeon mode=0
COMBO@@END@@_combobox_add_kernel_option@@nomodeset radeon mode=1
COMBO@@END@@_combobox_add_kernel_option@@rootdelay=90
COMBO@@END@@_combobox_add_kernel_option@@vga=771
COMBO@@END@@_combobox_add_kernel_option@@xforcevesa
SET@_combobox_add_kernel_option.set_active(0)
SET@_combobox_add_kernel_option.set_sensitive(True)
SET@_label_kernelpurge.set_text('''Purger les kernels puis réinstaller le dernier kernel''')
SET@_label_open_etc_default_grub.set_text('''Modifier le fichier de configuration de GRUB''')
SET@_label_partition_booted_bymbr.set_text('''Partition démarrée par le MBR :''')
SET@_about.set_title('''À propos''')
SET@_about.set_icon_from_file('''x-boot-repair.png''')
SET@_label_translate.set_text('''Traduire''')
SET@_label_thanks.set_text('''Crédits''')
SET@_label_gpl.set_markup('''<small>GNU-GPL v3</small>''')
SET@_label_copyright.set_markup('''<small>(C) 2010-2020 Yann MRN</small>''')
SET@_backupwindow.set_title('''Réparateur de démarrage''')
SET@_label_pleasechoosebackuprep.set_text('''Veuillez choisir un dossier où placer la sauvegarde.\nIl est recommandé de choisir un disque USB.''')
SET@_label_backup_table.set_text('''Sauvegarder les tables de partitions, les secteurs d'amorçage et les logs''')
SET@_label_winboot.set_text('''Réparer les fichiers de démarrage de Windows''')
SET@_label_upload.set_text('''Envoyer le rapport en ligne sur un pastebin''')
SET@_label_upload1.set_text('''Envoyer le rapport en ligne sur un pastebin''')
SET@_label_stats.set_text('''Participer aux statistiques d'utilisation''')
SET@_label_internet.set_text('''Vérifier la connexion internet''')
SET@_label_internet1.set_text('''Vérifier la connexion internet''')
COMBO@@CLEAR@@_combobox_bootflag
SET@_hbox_bootflag.show()
COMBO@@END@@_combobox_bootflag@@sdb1 (Ubuntu 20.04.3 LTS)
COMBO@@END@@_combobox_bootflag@@sdb2
COMBO@@END@@_combobox_bootflag@@sda2 (Ubuntu 20.04.3 LTS)
COMBO@@END@@_combobox_bootflag@@sda1 (Windows 7)
SET@_label_restore_mbrof.set_text('''Restaurer le MBR de :''')
COMBO@@END@@_combobox_restore_mbrof@@sda (generic mbr)
COMBO@@END@@_combobox_restore_mbrof@@sda (generic altmbr)
COMBO@@END@@_combobox_restore_mbrof@@sda (generic gptmbr)
COMBO@@END@@_combobox_restore_mbrof@@sdb (generic mbr)
COMBO@@END@@_combobox_restore_mbrof@@sdb (generic altmbr)
COMBO@@END@@_combobox_restore_mbrof@@sdb (generic gptmbr)
SET@_button_recommendedrepair.set_sensitive(False)
SET@_checkbutton_repairfilesystems.set_active(False)
SET@_checkbutton_wubi.set_active(False)
SET@_checkbutton_wubi.set_sensitive(False)
SET@_checkbutton_pastebin.set_active(True)
SET@_checkbutton_upload.set_active(True)
SET@_checkbutton_unhide_boot_menu.set_active(True)
SET@_checkbutton_reinstall_grub.hide()
SET@_tab_mbr_options.set_sensitive(True)
SET@_vbox_mbr_options.show()
SET@_checkbutton_restore_bkp.hide()
SET@_checkbutton_create_bkp.hide()
SET@_checkbutton_winefi_bkp.hide()
SET@_combobox_restore_mbrof.set_active(0)
SET@_button_mainapply.set_sensitive(False)
COMBO@@CLEAR@@_combobox_partition_booted_bymbr
COMBO@@END@@_combobox_partition_booted_bymbr@@sda1 (Windows 7)
COMBO@@END@@_combobox_partition_booted_bymbr@@sda2 (Ubuntu 20.04.3 LTS)
COMBO@@END@@_combobox_partition_booted_bymbr@@sdb2
COMBO@@END@@_combobox_partition_booted_bymbr@@sdb1 (Ubuntu 20.04.3 LTS)
SET@_combobox_partition_booted_bymbr.set_active(0)
SET@_vbox_partition_booted_bymbr.show()
SET@_button_mainapply.set_sensitive(True)
SET@_checkbutton_restore_mbr.set_active(True)
SET@_combobox_bootflag.set_active(0)
SET@_hbox_bootflag.set_sensitive(True)
SET@_combobox_bootflag.set_sensitive(False)
SET@_checkbutton_bootflag.set_active(False)
SET@_vbox_winboot.set_sensitive(False)
SET@_button_recommendedrepair.set_sensitive(True)
SET@pulsatewindow.hide()
SET@_mainwindow.show()
/usr/share/boot-sav/gui-tab-other.sh : ligne 93 :  5708 Complété              while true; do
    echo 'SET@_progressbar1.pulse()'; sleep 0.2;
done
DEBUG=> in bash NOT GET _combobox_add_kernel_option nomodeset
DEBUG=> in bash NOT GET _checkbutton_unhide_boot_menu True
SET@_spinbutton_unhide_boot_menu.set_sensitive(True)
DEBUG=> in bash NOT GET _combobox_restore_mbrof sda (generic mbr)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sda1 (Windows 7)
DEBUG=> in bash NOT GET _checkbutton_restore_mbr True
SET@_checkbutton_reinstall_grub.set_active(False)
SET@_tab_grub_location.set_sensitive(False)
SET@_vbox_grub_location.hide()
SET@_tab_grub_options.set_sensitive(False)
SET@_vbox_grub_options.hide()
SET@_checkbutton_restore_bkp.hide()
SET@_checkbutton_create_bkp.hide()
SET@_checkbutton_winefi_bkp.hide()
SET@_tab_mbr_options.set_sensitive(True)
SET@_vbox_mbr_options.show()
SET@_checkbutton_restore_bkp.hide()
SET@_checkbutton_create_bkp.hide()
SET@_checkbutton_winefi_bkp.hide()
SET@_combobox_restore_mbrof.set_active(0)
SET@_button_mainapply.set_sensitive(False)
COMBO@@CLEAR@@_combobox_partition_booted_bymbr
COMBO@@END@@_combobox_partition_booted_bymbr@@sda1 (Windows 7)
COMBO@@END@@_combobox_partition_booted_bymbr@@sda2 (Ubuntu 20.04.3 LTS)
COMBO@@END@@_combobox_partition_booted_bymbr@@sdb2
COMBO@@END@@_combobox_partition_booted_bymbr@@sdb1 (Ubuntu 20.04.3 LTS)
SET@_combobox_partition_booted_bymbr.set_active(0)
SET@_vbox_partition_booted_bymbr.show()
SET@_button_mainapply.set_sensitive(True)
SET@_combobox_bootflag.set_active(0)
SET@_hbox_bootflag.set_sensitive(True)
SET@_combobox_bootflag.set_sensitive(False)
SET@_checkbutton_bootflag.set_active(False)
DEBUG=> in bash NOT GET _combobox_bootflag sdb1 (Ubuntu 20.04.3 LTS)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sdb1 (Ubuntu 20.04.3 LTS)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sdb1 (Ubuntu 20.04.3 LTS)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sdb1 (Ubuntu 20.04.3 LTS)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sda1 (Windows 7)
DEBUG=> in bash NOT GET _expander1 False
SET@_hbox_bootrepairmenu.hide()
SET@_button_mainapply.show()
SET@_mainwindow.resize(10,10)
DEBUG=> in bash NOT GET _checkbutton_restore_mbr False
SET@_tab_mbr_options.set_sensitive(False)
SET@_vbox_mbr_options.hide()
SET@_checkbutton_restore_bkp.hide()
SET@_checkbutton_create_bkp.hide()
SET@_checkbutton_winefi_bkp.hide()
SET@_combobox_bootflag.set_active(0)
SET@_hbox_bootflag.set_sensitive(True)
SET@_combobox_bootflag.set_sensitive(False)
SET@_checkbutton_bootflag.set_active(False)
DEBUG=> in bash NOT GET _checkbutton_restore_mbr True
SET@_checkbutton_reinstall_grub.set_active(False)
SET@_tab_grub_location.set_sensitive(False)
SET@_vbox_grub_location.hide()
SET@_tab_grub_options.set_sensitive(False)
SET@_vbox_grub_options.hide()
SET@_checkbutton_restore_bkp.hide()
SET@_checkbutton_create_bkp.hide()
SET@_checkbutton_winefi_bkp.hide()
SET@_tab_mbr_options.set_sensitive(True)
SET@_vbox_mbr_options.show()
SET@_checkbutton_restore_bkp.hide()
SET@_checkbutton_create_bkp.hide()
SET@_checkbutton_winefi_bkp.hide()
SET@_combobox_restore_mbrof.set_active(0)
SET@_button_mainapply.set_sensitive(False)
COMBO@@CLEAR@@_combobox_partition_booted_bymbr
COMBO@@END@@_combobox_partition_booted_bymbr@@sda1 (Windows 7)
COMBO@@END@@_combobox_partition_booted_bymbr@@sda2 (Ubuntu 20.04.3 LTS)
COMBO@@END@@_combobox_partition_booted_bymbr@@sdb2
COMBO@@END@@_combobox_partition_booted_bymbr@@sdb1 (Ubuntu 20.04.3 LTS)
SET@_combobox_partition_booted_bymbr.set_active(0)
SET@_vbox_partition_booted_bymbr.show()
SET@_button_mainapply.set_sensitive(True)
SET@_combobox_bootflag.set_active(0)
SET@_hbox_bootflag.set_sensitive(True)
SET@_combobox_bootflag.set_sensitive(False)
SET@_checkbutton_bootflag.set_active(False)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sdb1 (Ubuntu 20.04.3 LTS)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sdb1 (Ubuntu 20.04.3 LTS)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sdb1 (Ubuntu 20.04.3 LTS)
DEBUG=> in bash NOT GET _combobox_partition_booted_bymbr sda1 (Windows 7)
DEBUG=> in bash NOT GET _button_mainquit clicked
SET@_mainwindow.hide()

=============================== Default settings ===============================

The default repair of the Boot-Repair utility would restore the [(generic mbr)] MBR in sda, and make it boot on sda1.
Additional repair would be performed: unhide-bootmenu-10s      
SET@_mainwindow.hide()
Operation_aborted
EXIT@@

Voila pour les tests du PPA 146.

@+.   Babdu89   .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#2223 Le 30/12/2021, à 19:01

Babdu89

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

@jibel. réponse au post#2221

Bonjour.
Un boot info fait en session live BRD avec le ppa mis à jour, 4ppa146 . ton boot-info montre que le PPA n'est pas à jour.  (4ppa143).
Sera intéressant vu que tu n'as plus de Windows installé, on va voir ce que la réparation recommandée propose.

Comme tu as aussi plusieurs disques, on va voir si ça confirme qu'il n'est plus demandé si le disque untel est un disque amovible?.

Si tu veux bien poster le contenu du boot-info dans ta réponse, merci.

Si tu Lances un boot-repair sans valider de réparation, tu quittes avant.
Regarder dans les options avancée si tu remarques la même chose que moi post ci- dessus?.

@+.   Babdu89   .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#2224 Le 30/12/2021, à 21:19

jibel

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

@Babdu89,
Tout ce que tu as mentionnés ont étés faites sans réparations juste avec la version 4ppa143...alors que je croyais avoir la version 147.. Mais le gros ennui a été avec mon dernier D.D dans lequel se trouve  Studio-Ubuntu 20.04...J'ai lancé B.R.D en choisissant "options avancées" avec la version de BRD en 64 bits.. Impossible de choisir, emplacement du grub et applique même si la MàJ a été faite, que ça soit Studio-ubuntu en 1er !! D'où ma surprise. J'ai été obligé de stopper B.R.D et de  connecter la clé USB avec la version 32 bits et rebelote, plus d'options avancées avec avertissement d'avoir utilisé la version en 64 bits.... Qu'est-ce que c'est que ces versions de Màj finissent par porter des ennuis..Ça n'est pas une critique, juste une constatation en plus sans avoir aucun Windows..je constate qu'avec le seul OSs libres il faut absolument utiliser l'OS ou mes MàJ de B.R.D  seront appliquées et en fonctions ...

Dernière modification par jibel (Le 31/12/2021, à 17:32)


Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur. Elles doivent être reproduites et même corrigées sans l'accord préalable du susdit et toc !

Mint 17.1,Voyager20.04,Emmabuntus 1.Buster, Debian 10.buster, Hybryde 14.04, Pas d'OS intermédiaire ! PC Medion AKOYA  DD 1T + 2 .

Hors ligne

#2225 Le 30/12/2021, à 21:37

Babdu89

Re : [Réparateur de démarrage] Développement du logiciel Boot-Repair

@jibel.
Tu parles de version 147 du PPA?. Je me demande où tu as pu récupérer ça?.
Alors qu'on en est à la version 146.
Version 146 qui chez moi pause souci en session live, avec BRD que j'ai mis à jour, voir le boot-info du post#2222.
Si tu dis que tu as testé une version qui ne permet plus d'utiliser les "Options avancées" depuis une session live de BRD mis à jour. Il est possible que ce soit la version 146 que tu mis à jour.
Si tu veux bien relire le post#2222 au sujet de ce que j'ai constaté en utilisant en session live BRD?. Merci de confirmer si tu as constaté la même chose.

@+.   Babdu89   .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne