#51 Le 14/07/2009, à 18:33
- frafa
Re : Probleme Disque dur
Peux-tu me confirmer que la carte pci dont tu parle est bien celle-là ?
http://www.viagallery.com/index.php?opt … 750&Page=1
Hors ligne
#52 Le 14/07/2009, à 18:57
- shikamaru
Re : Probleme Disque dur
C'est bien une via VT6421, mais c'est celle la :
http://www.amazon.fr/Carte-contr%C3%B4leur-ports-SATA-PCI-ST101/dp/B0012DM1C4
Hors ligne
#53 Le 14/07/2009, à 19:09
- frafa
Re : Probleme Disque dur
Bon apparement le driver de cette carte est sata_via
==> /lib/modules/2.6.28-6-386/kernel/drivers/ata/sata_via.ko
par contre a un probleme ce driver n'est apparement disponible sur Ubuntu Jaunty
que pour le kernel linux-image-2.6.28-6-386
http://packages.ubuntu.com/search?searc … y&arch=any
donc le plus simple sans trop mettre les mains dans le camboui,
c'est d'installer et de demarrer sur ce kernel
sudo apt-get install linux-image-2.6.28-6-386et au demarrage tu choisit bien cette version de kernel!
essaie et dit moi, si probleme reposte...
si tu voit pas ton disque apres avoir demarré sur ce kernel fait:
sudo modprobe sata_viaHors ligne
#54 Le 14/07/2009, à 22:41
- shikamaru
Re : Probleme Disque dur
Bon voilà se qui se passe.
Quand je choisit se kernel :
Tous fonctionne jusqu'au chargement de ubuntu il me mets sa (ya peut etre quelque erreur d'orthographe mais j'ai tous ecrit sur dur papier donc...)
Boot from (hd0,4) ext3 117eb201-714b-4a44-8796-16d5d 1c77f27
starting up
[1.835244]IO APIC ressources could be not be allocated.
Loading , please wait ...
Gave up waiting for root device. Common problem :
_Boot args(cat/proc/cm dlin)
_Checks root delay = (did the system wait long enough?)
_Check root =did the system wait for the right device?)
_Missing modules (cat/proc/modules;Ls/dev)
Alert ! /dev/disk/by-uuid/117eb201-714b-8796-16d5d1c77f27 does not exist. Dropping to a shell !
BusyBox v1.10.2(Ubuntu 1:1.10.2-2 ubuntu7)built-in shell( ici il manque un truck ^^)
Enter 'help' for a list of built-in commands.
(initramfs)[57.816039]ata 3 : COMRESET failed (errno =-16)
[60.840029]ata3 : COMRESET failed (errno =-16)
[62.840078]ata3 : reset failed, giving upBon après j'ai taper help puis return et sa ma envoyer sur la page pour le login et le mots de passe. Puis sur mon bureau.
Mon DD n'est pas afficher et il me s'affiche pas quand je tape :sudo modprobe sata_via
Je vais essayer avec un autre kernel pour voir si sa affiche la meme chose
Dernière modification par shikamaru (Le 14/07/2009, à 22:46)
Hors ligne
#55 Le 14/07/2009, à 23:56
- frafa
Re : Probleme Disque dur
inscrit le module de ta carte avec cette commande:
sudo modprobe sata_viapuis regarde si tu voit ton disque dans le retour de cette commande:
sudo fdisk -lsi tu ne voit toujours pas ton disque dans le retour de fdisk, fait passer le retour de ces commandes
lsmod | grep -i viaet
dmesgDernière modification par frafa (Le 15/07/2009, à 00:02)
Hors ligne
#56 Le 15/07/2009, à 10:38
- shikamaru
Re : Probleme Disque dur
Toujours la meme page d'erreure au lancement du kernel.
Puis quand je fait sudo modprobe sata_via et sudo fdisk -l il m'affiche pas mon DD
voila avec
lsmod | grep -i via
snd_via82xx 23448 3
gameport 11016 1 snd_via82xx
snd_ac97_codec 103972 1 snd_via82xx
snd_pcm 72840 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 8840 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7168 1 snd_via82xx
via686a 12812 0
i2c_viapro 7700 0
via_agp 8192 1
snd 53796 17 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_core 23824 1 i2c_viapro
agpgart 33968 1 via_agp
sata_via 9220 0
pata_via 8836 2
libata 173728 4 ata_generic,pata_acpi,sata_via,pata_viaet pour dmesg:
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Linux version 2.6.28-6-386 (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #20-Ubuntu Fri Apr 17 08:32:39 UTC 2009 (Ubuntu 2.6.28-6.20-386)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000090c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] modified: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] modified: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to fff0000 @ 10000-16000
[ 0.000000] RAMDISK: 0f816000 - 0ffdfe30
[ 0.000000] ACPI: RSDP 000F6DC0, 0014 (r0 VIA694)
[ 0.000000] ACPI: RSDT 0FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 0FFF30C0, 24C5 (r1 VIA694 AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0FFF0000, 0040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 00000000 - 0fff0000
[ 0.000000] bootmap 00012000 - 00014000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 000fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 00005d6d7c] TEXT DATA BSS ==> [0000100000 - 00005d6d7c]
[ 0.000000] #2 [000f816000 - 000ffdfe30] RAMDISK ==> [000f816000 - 000ffdfe30]
[ 0.000000] #3 [00005d7000 - 00005da000] INIT_PG_TABLE ==> [00005d7000 - 00005da000]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #6 [0000012000 - 0000014000] BOOTMAP ==> [0000012000 - 0000014000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000010 -> 0x00000090
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65393
[ 0.000000] free_area_init_node: node 0, pgdat c04c9e00, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3937 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60944 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000090000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64881
[ 0.000000] Kernel command line: root=UUID=117eb201-714b-4a44-8796-16d5d1c77f27 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1466.420 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 246140k/262080k available (2641k kernel code, 15232k reserved, 1282k data, 440k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.004000] .init : 0xc04d8000 - 0xc0546000 ( 440 kB)
[ 0.004000] .data : 0xc0394633 - 0xc04d509c (1282 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0394633 (2641 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 2932.84 BogoMIPS (lpj=5865680)
[ 0.004045] Security Framework initialized
[ 0.004059] SELinux: Disabled at boot.
[ 0.004097] AppArmor: AppArmor initialized
[ 0.004108] Mount-cache hash table entries: 512
[ 0.004319] Initializing cgroup subsys ns
[ 0.004326] Initializing cgroup subsys cpuacct
[ 0.004329] Initializing cgroup subsys freezer
[ 0.004345] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004349] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004370] CPU: AMD Athlon(tm) XP 1700+ stepping 02
[ 0.004379] Checking 'hlt' instruction... OK.
[ 0.022170] Freeing SMP alternatives: 0k freed
[ 0.022180] ACPI: Core revision 20080926
[ 0.023889] ACPI: Checking initramfs for custom DSDT
[ 0.435944] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.437900] net_namespace: 752 bytes
[ 0.437920] Booting paravirtualized kernel on bare hardware
[ 0.438195] regulator: core version 0.5
[ 0.438275] NET: Registered protocol family 16
[ 0.438451] EISA bus registered
[ 0.438481] ACPI: bus type pci registered
[ 0.469888] PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1
[ 0.469893] PCI: Using configuration type 1 for base access
[ 0.470952] ACPI: EC: Look up EC in DSDT
[ 0.475315] ACPI: Interpreter enabled
[ 0.475323] ACPI: (supports S0 S1 S4 S5)
[ 0.475348] ACPI: Using PIC for interrupt routing
[ 0.479258] ACPI: No dock devices found.
[ 0.479273] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.479334] pci 0000:00:00.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff]
[ 0.479389] pci 0000:00:01.0: supports D1
[ 0.479477] pci 0000:00:07.1: reg 20 io port: [0x9000-0x900f]
[ 0.479526] pci 0000:00:07.2: reg 20 io port: [0x9400-0x941f]
[ 0.479576] pci 0000:00:07.3: reg 20 io port: [0x9800-0x981f]
[ 0.479639] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
[ 0.479644] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
[ 0.479674] pci 0000:00:07.5: reg 10 io port: [0x9c00-0x9cff]
[ 0.479680] pci 0000:00:07.5: reg 14 io port: [0xa000-0xa003]
[ 0.479687] pci 0000:00:07.5: reg 18 io port: [0xa400-0xa403]
[ 0.479736] pci 0000:00:0d.0: reg 10 io port: [0xac00-0xac0f]
[ 0.479743] pci 0000:00:0d.0: reg 14 io port: [0xb000-0xb00f]
[ 0.479749] pci 0000:00:0d.0: reg 18 io port: [0xb400-0xb40f]
[ 0.479756] pci 0000:00:0d.0: reg 1c io port: [0xb800-0xb80f]
[ 0.479762] pci 0000:00:0d.0: reg 20 io port: [0xbc00-0xbc1f]
[ 0.479769] pci 0000:00:0d.0: reg 24 io port: [0xc000-0xc0ff]
[ 0.479775] pci 0000:00:0d.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.479827] pci 0000:01:00.0: reg 10 32bit mmio: [0xdc000000-0xdcffffff]
[ 0.479834] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.479850] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.479887] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xddffffff]
[ 0.479892] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.479900] bus 00 -> node 0
[ 0.479910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.493173] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.493374] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.493613] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.493849] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.494148] usbcore: registered new interface driver usbfs
[ 0.494175] usbcore: registered new interface driver hub
[ 0.494216] usbcore: registered new device driver usb
[ 0.494295] PCI: Using ACPI for IRQ routing
[ 0.494436] NET: Registered protocol family 8
[ 0.494439] NET: Registered protocol family 20
[ 0.494593] AppArmor: AppArmor Filesystem Enabled
[ 0.494618] pnp: PnP ACPI init
[ 0.494643] ACPI: bus type pnp registered
[ 0.498064] pnp: PnP ACPI: found 13 devices
[ 0.498067] ACPI: ACPI bus type pnp unregistered
[ 0.498073] PnPBIOS: Disabled by ACPI PNP
[ 0.498089] system 00:00: iomem range 0xcb800-0xcbfff has been reserved
[ 0.498093] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.498097] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.498101] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.498105] system 00:00: iomem range 0xfff0000-0xfffffff could not be reserved
[ 0.498109] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.498113] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.498117] system 00:00: iomem range 0x100000-0xffeffff could not be reserved
[ 0.498121] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.498130] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.532889] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.532893] pci 0000:00:01.0: IO window: disabled
[ 0.532900] pci 0000:00:01.0: MEM window: 0xdc000000-0xddffffff
[ 0.532904] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.532922] pci 0000:00:01.0: setting latency timer to 64
[ 0.532928] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.532931] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.532934] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.532937] bus: 01 index 1 mmio: [0xdc000000-0xddffffff]
[ 0.532940] bus: 01 index 2 mmio: [0xd0000000-0xd7ffffff]
[ 0.532943] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.532960] NET: Registered protocol family 2
[ 0.533118] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.533425] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.533595] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.533684] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.533688] TCP reno registered
[ 0.533783] NET: Registered protocol family 1
[ 0.533985] checking if image is initramfs... it is
[ 1.036010] Switched to high resolution mode on CPU 0
[ 1.459865] Freeing initrd memory: 7975k freed
[ 1.460277] audit: initializing netlink socket (disabled)
[ 1.460315] type=2000 audit(1247653911.460:1): initialized
[ 1.470014] VFS: Disk quotas dquot_6.5.1
[ 1.470058] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.470140] fuse init (API version 7.10)
[ 1.470262] msgmni has been set to 496
[ 1.470522] alg: No test for stdrng (krng)
[ 1.470540] io scheduler noop registered
[ 1.470543] io scheduler anticipatory registered
[ 1.470546] io scheduler deadline registered
[ 1.470562] io scheduler cfq registered (default)
[ 1.470585] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 1.470590] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.470596] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 1.470643] pci 0000:01:00.0: Boot video device
[ 1.473729] isapnp: Scanning for PnP cards...
[ 1.827545] isapnp: No Plug & Play device found
[ 1.829029] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.829169] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.829301] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.829676] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.829845] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.830826] brd: module loaded
[ 1.830867] Fixed MDIO Bus: probed
[ 1.830946] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.830972] Uniform Multi-Platform E-IDE driver
[ 1.831053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.831076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.831090] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.831700] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 1.831706] PCI: setting IRQ 5 as level-triggered
[ 1.831714] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 1.831730] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 1.831830] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 1.831862] uhci_hcd 0000:00:07.2: irq 5, io base 0x00009400
[ 1.832106] usb usb1: configuration #1 chosen from 1 choice
[ 1.832151] hub 1-0:1.0: USB hub found
[ 1.832175] hub 1-0:1.0: 2 ports detected
[ 1.832317] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 1.832328] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 1.832393] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 1.832414] uhci_hcd 0000:00:07.3: irq 5, io base 0x00009800
[ 1.832544] usb usb2: configuration #1 chosen from 1 choice
[ 1.832577] hub 2-0:1.0: USB hub found
[ 1.832592] hub 2-0:1.0: 2 ports detected
[ 1.832751] usbcore: registered new interface driver libusual
[ 1.832825] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.833172] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.833181] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.833627] mice: PS/2 mouse device common for all mice
[ 1.833687] EISA: Probing bus 0 at eisa.0
[ 1.833713] Cannot allocate resource for EISA slot 4
[ 1.833716] Cannot allocate resource for EISA slot 5
[ 1.833719] Cannot allocate resource for EISA slot 6
[ 1.833731] EISA: Detected 0 cards.
[ 1.833736] cpuidle: using governor ladder
[ 1.834428] TCP cubic registered
[ 1.834481] IO APIC resources could be not be allocated.
[ 1.834541] Using IPI Shortcut mode
[ 1.834642] registered taskstats version 1
[ 1.834803] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.834806] EDD information not available.
[ 1.835918] Freeing unused kernel memory: 440k freed
[ 1.868719] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.144062] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 2.169367] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.169422] processor ACPI_CPU:00: registered as cooling_device0
[ 2.169428] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 2.243002] Floppy drive(s): fd0 is 1.44M
[ 2.259935] FDC 0 is a post-1991 82077
[ 2.322917] SCSI subsystem initialized
[ 2.348685] usb 1-1: configuration #1 chosen from 1 choice
[ 2.355246] libata version 3.00 loaded.
[ 2.378965] pata_via 0000:00:07.1: version 0.3.3
[ 2.379924] scsi0 : pata_via
[ 2.382077] scsi1 : pata_via
[ 2.382208] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x9000 irq 14
[ 2.382213] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x9008 irq 15
[ 2.464143] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 2.544494] ata1.00: ATAPI: HL-DT-ST GCE-8160B, 2.01, max MWDMA2
[ 2.544539] ata1.01: ATAPI: LG DVD-ROM DRD-8160B, 1.01, max UDMA/33
[ 2.560527] ata1.00: configured for MWDMA2
[ 2.568615] ata1.01: configured for UDMA/33
[ 2.639907] usb 1-2: configuration #1 chosen from 1 choice
[ 2.651172] Initializing USB Mass Storage driver...
[ 2.654213] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2.655281] usbcore: registered new interface driver usb-storage
[ 2.655290] USB Mass Storage support registered.
[ 2.655451] usb-storage: device found at 3
[ 2.655454] usb-storage: waiting for device to settle before scanning
[ 2.732863] ata2.00: ATA-5: ST340016A, 3.19, max UDMA/100
[ 2.732870] ata2.00: 78165360 sectors, multi 16: LBA
[ 2.732901] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 2.741125] ata2.00: configured for UDMA/33
[ 2.741548] scsi 0:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8160B 2.01 PQ: 0 ANSI: 5
[ 2.742147] scsi 0:0:1:0: CD-ROM LG DVD-ROM DRD8160B 1.01 PQ: 0 ANSI: 5
[ 2.742320] scsi 1:0:0:0: Direct-Access ATA ST340016A 3.19 PQ: 0 ANSI: 5
[ 2.745478] sata_via 0000:00:0d.0: version 2.4
[ 2.746120] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 2.746126] PCI: setting IRQ 11 as level-triggered
[ 2.746134] sata_via 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.746263] sata_via 0000:00:0d.0: routed to hard irq line 11
[ 2.748179] scsi3 : sata_via
[ 2.748354] scsi4 : sata_via
[ 2.749292] scsi5 : sata_via
[ 2.749412] ata3: SATA max UDMA/133 port i16@0xac00 bmdma 0xbc00 irq 11
[ 2.749418] ata4: SATA max UDMA/133 port i16@0xb000 bmdma 0xbc08 irq 11
[ 2.749422] ata5: PATA max UDMA/133 port i16@0xb400 bmdma 0xbc10 irq 11
[ 2.796012] Marking TSC unstable due to TSC halts in idle
[ 7.654904] usb-storage: device scan complete
[ 7.661883] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 7.677865] Driver 'sd' needs updating - please use bus_type methods
[ 7.678122] sd 1:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 7.678153] sd 1:0:0:0: [sda] Write Protect is off
[ 7.678158] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.678196] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.678317] sd 1:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 7.678336] sd 1:0:0:0: [sda] Write Protect is off
[ 7.678340] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.678372] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.678379] sda: sda1 sda2 < sda5 sda6 >
[ 7.728007] sd 1:0:0:0: [sda] Attached SCSI disk
[ 7.740880] sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors: (2.06 GB/1.92 GiB)
[ 7.747867] sd 2:0:0:0: [sdb] Write Protect is off
[ 7.747874] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 7.747878] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.775851] sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors: (2.06 GB/1.92 GiB)
[ 7.781840] sd 2:0:0:0: [sdb] Write Protect is off
[ 7.781844] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 7.781848] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.781857] sdb: sdb1
[ 7.792986] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 7.801967] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 7.802008] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 7.802050] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 7.802092] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 8.108796] ata3: link is slow to respond, please be patient (ready=0)
[ 12.756038] ata3: COMRESET failed (errno=-16)
[ 18.116037] ata3: link is slow to respond, please be patient (ready=0)
[ 22.764040] ata3: COMRESET failed (errno=-16)
[ 28.124036] ata3: link is slow to respond, please be patient (ready=0)
[ 57.808039] ata3: COMRESET failed (errno=-16)
[ 62.832029] ata3: COMRESET failed (errno=-16)
[ 62.832085] ata3: reset failed, giving up
[ 63.162422] ata4: SATA link down (SStatus 0 SControl 310)
[ 63.344702] Driver 'sr' needs updating - please use bus_type methods
[ 63.347675] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 63.347686] Uniform CD-ROM driver Revision: 3.20
[ 63.347905] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 63.352264] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[ 63.352504] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 101.565595] PM: Starting manual resume from disk
[ 101.565603] PM: Resume from partition 8:6
[ 101.565606] PM: Checking hibernation image.
[ 101.566047] PM: Resume from disk failed.
[ 101.620962] kjournald starting. Commit interval 5 seconds
[ 101.620984] EXT3-fs: mounted filesystem with ordered data mode.
[ 107.983930] udev: starting version 141
[ 108.463264] parport_pc: VIA 686A/8231 detected
[ 108.463271] parport_pc: probing current configuration
[ 108.463290] parport_pc: Current parallel port base: 0x378
[ 108.464326] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 108.565391] parport_pc: VIA parallel port: io=0x378, irq=7
[ 108.604420] Linux agpgart interface v0.103
[ 108.680670] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 108.700131] ACPI: Power Button (FF) [PWRF]
[ 108.700527] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 108.721378] ACPI: Power Button (CM) [PWRB]
[ 108.722272] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 108.736283] ACPI: Sleep Button (CM) [SLPB]
[ 108.803449] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 108.988570] cfg80211: Calling CRDA to update world regulatory domain
[ 109.116616] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 109.135586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 109.212541] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 109.218211] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xd8000000
[ 109.374974] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 109.541299] ppdev: user-space parallel port driver
[ 109.620123] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[ 109.668217] cfg80211: World regulatory domain updated:
[ 109.668229] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 109.668234] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.668238] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 109.668242] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 109.668245] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.668249] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.747040] psmouse serio1: ID: 10 00 64<7>phy0: Selected rate control algorithm 'pid'
[ 109.858795] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 109.858803] PCI: setting IRQ 10 as level-triggered
[ 109.858811] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 109.858955] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
[ 109.896302] zd1211rw 1-1:1.0: phy0
[ 109.896355] usbcore: registered new interface driver zd1211rw
[ 110.173208] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 110.585245] lp0: using parport0 (interrupt-driven).
[ 110.725962] Adding 730916k swap on /dev/sda6. Priority:-1 extents:1 across:730916k
[ 111.195638] EXT3 FS on sda5, internal journal
[ 112.077880] type=1505 audit(1247654022.076:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2117
[ 112.174571] type=1505 audit(1247654022.172:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2121
[ 112.175083] type=1505 audit(1247654022.172:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2121
[ 112.175213] type=1505 audit(1247654022.172:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2121
[ 112.175325] type=1505 audit(1247654022.172:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2121
[ 112.455607] type=1505 audit(1247654022.452:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2126
[ 112.456282] type=1505 audit(1247654022.456:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2126
[ 112.515436] type=1505 audit(1247654022.512:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2130
[ 115.700310] Bluetooth: Core ver 2.13
[ 115.701323] NET: Registered protocol family 31
[ 115.701328] Bluetooth: HCI device and connection manager initialized
[ 115.701334] Bluetooth: HCI socket layer initialized
[ 115.843875] Bluetooth: L2CAP ver 2.11
[ 115.843881] Bluetooth: L2CAP socket layer initialized
[ 115.866120] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 115.866126] Bluetooth: BNEP filters: protocol multicast
[ 115.892604] Bridge firewalling registered
[ 115.905317] Bluetooth: SCO (Voice Link) ver 0.6
[ 115.905323] Bluetooth: SCO socket layer initialized
[ 117.243892] NET: Registered protocol family 10
[ 117.245370] lo: Disabled Privacy Extensions
[ 121.000955] usb 1-1: firmware: requesting zd1211/zd1211b_ub
[ 121.076466] usb 1-1: firmware: requesting zd1211/zd1211b_uphr
[ 121.301306] zd1211rw 1-1:1.0: firmware version 4725
[ 121.360337] zd1211rw 1-1:1.0: zd1211b chip 083a:4505 v4810 full 00-13-f7 AL2230_RF pa0 g--NS
[ 121.366579] cfg80211: Calling CRDA for country: US
[ 121.382936] cfg80211: Regulatory domain changed to country: US
[ 121.382945] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 121.382949] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 121.382953] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 121.382957] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 121.382960] (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 121.382964] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 121.447556] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 121.622843] NET: Registered protocol family 17
[ 148.808192] wlan0: authenticate with AP 00:1a:6b:c7:e9:3f
[ 148.815095] wlan0: authenticated
[ 148.815108] wlan0: associate with AP 00:1a:6b:c7:e9:3f
[ 148.823146] wlan0: RX AssocResp from 00:1a:6b:c7:e9:3f (capab=0x411 status=0 aid=1)
[ 148.823155] wlan0: associated
[ 148.826666] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 159.520044] wlan0: no IPv6 routers present
[ 160.112084] usb 1-2: USB disconnect, address 3Hors ligne
#57 Le 15/07/2009, à 10:49
- Qid
Re : Probleme Disque dur
tien ça a une tete de deja vu pour moi
seulement tu veux quel kernel parce que le dernier ne fait plus ça !
"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil
Hors ligne
#58 Le 15/07/2009, à 12:08
- shikamaru
Re : Probleme Disque dur
Bin je fait sa sur le kernel 2.6.28-6-386 comme ma dit frafa
Hors ligne
#59 Le 15/07/2009, à 14:12
- frafa
Re : Probleme Disque dur
bon c'est le bordel,
apparement la version du driver integré dans ce kenrel est bogé
==> Driver 'sd' needs updating - please use bus_type methods
la seule solution va etre de recompiler un kernel recent en ajoutant ton driver,
car je ne sait pour quelle raison ubuntu n'integre pas/plus ce driver dans ces kernel,
alors que si on regarde chez debian ce driver est bien present dans tous leurs kernel...
http://packages.debian.org/search?searc … g&arch=any
donc soit passer sous debian, soit recompiler un kernel
mais bon c'est un peu hard recompiler un kernel
tu as envie de pousser plus loin essais ?
Hors ligne
#60 Le 15/07/2009, à 14:25
- shikamaru
Re : Probleme Disque dur
Bah euh, je pense que je vais tenter debian si tu veux bien un peut m'aider a le maitriser au début 
(mais je pense pouvoir réussir tous seul si il est pas dure)
Car modifier le kernel sa ma pas l'air d'être une tache facile , j'attendrai avoir un peut plus d'expérience je pense ^^. Bon je le télécharge et je l'installer puis je te redit sa !
Hors ligne
#61 Le 15/07/2009, à 14:42
- frafa
Re : Probleme Disque dur
par contre Debian n'est pas un livecd, c'est juste pour faire une install
il existe un projet nommé debian-live qui fait un livecd qui lui ne permet pas d'installer
mail il te permettra de tester avant de te decider d'installer Debian
pour telecharger le livecd de debian c'est par là:
http://cdimage.debian.org/cdimage/relea … esktop.iso
apres chez debian c'est un peu plus complique pour installer,
je te conseille de passer par une install via le net si tu as une bonne connexion
à l'aide de ce cd:
http://cdimage.debian.org/debian-cd/5.0 … etinst.iso
info sur version par là:
http://www.debian.org/distrib/netinst
Hors ligne
#62 Le 16/07/2009, à 13:51
- shikamaru
Re : Probleme Disque dur
Bon mon DD est pas détecter dans le poste de travail sous debian 
Hors ligne
#63 Le 16/07/2009, à 14:06
- frafa
Re : Probleme Disque dur
Seul les volumes amovibles sont montés automatiquement
pour les volumes internes il faut les specifier dans le fichier fstab
sous debian ouvre Gparted et regarde si voit ton disque
ou regarde avec fdisk
fdisk -lHors ligne
#64 Le 16/07/2009, à 14:43
- shikamaru
Re : Probleme Disque dur
voila se que m'affiche fdisk -l
Disk /dev/hdc: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x06910690
Device Boot Start End Blocks Id System
/dev/hdc1 * 1 2394 19229773+ 7 HPFS/NTFS
/dev/hdc2 2395 4772 19101285 83 Linux
/dev/hdc3 4773 4865 747022+ 5 Extended
/dev/hdc5 4773 4865 746991 82 Linux swap / Solaris
Hors ligne
#65 Le 16/07/2009, à 15:05
- frafa
Re : Probleme Disque dur
Bon une dernniere tentative!
le driver aurait dut s'inscrire automatiquement,
mais bon des fois que...
sous debian sudo n'est pas utilisé
pour passer une commande administrateur il faut utiliser su
donc ouvre un terminal et tape
suil te demande ton mot de pass saisi puis enter
apres dans le meme terminal tu fait:
modprobe sata_viapuis genre 5 secondes apres
fdisk -lsi tu voit toujours pas ton disque
fait passer le retour de:
lsmod | grep -i viaet
dmesgHors ligne
#66 Le 17/07/2009, à 21:33
- shikamaru
Re : Probleme Disque dur
Bon je pense que les nouvelles sont pas très bonne aucune détection de mon DD
voila se q'affiche les message pour lsmod | grep -i via et dmesg
snd_via82xx 20664 1
gameport 10700 1 snd_via82xx
snd_ac97_codec 88484 1 snd_via82xx
snd_pcm 62596 2 snd_via82xx,snd_ac97_codec
snd_page_alloc 7816 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6368 1 snd_via82xx
via686a 11948 0
snd 45604 10 snd_via82xx,snd_ac97_codec,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_viapro 6836 0
i2c_core 19828 1 i2c_viapro
via_agp 7744 1
agpgart 28776 1 via_agp
sata_via 6980 0
libata 140416 2 ata_generic,sata_via
via82cxxx 6948 0 [permanent]
ide_core 96136 4 ide_disk,ide_cd_mod,via82cxxx,ide_pci_generic
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:57:38 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65520
[ 0.000000] HighMem 65520 -> 65520
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65520
[ 0.000000] On node 0 totalpages: 65520
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60944 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F6DC0, 0014 (r0 VIA694)
[ 0.000000] ACPI: RSDT 0FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 0FFF30C0, 24C5 (r1 VIA694 AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0FFF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65008
[ 0.000000] Kernel command line: root=/dev/hdc2 ro quiet
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0120c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1466.348 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] Memory: 249924k/262080k available (1769k kernel code, 11580k reserved, 751k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba66b - 0xc0376620 ( 751 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba66b (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084176] Calibrating delay using timer specific routine.. 2935.90 BogoMIPS (lpj=5871811)
[ 0.084238] Security Framework initialized
[ 0.084250] SELinux: Disabled at boot.
[ 0.084255] Capability LSM initialized
[ 0.084282] Mount-cache hash table entries: 512
[ 0.084530] Initializing cgroup subsys ns
[ 0.084537] Initializing cgroup subsys cpuacct
[ 0.084540] Initializing cgroup subsys devices
[ 0.084570] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084575] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.084581] Intel machine check architecture supported.
[ 0.084586] Intel machine check reporting enabled on CPU#0.
[ 0.084609] Checking 'hlt' instruction... OK.
[ 0.100430] SMP alternatives: switching to UP code
[ 0.109075] Freeing SMP alternatives: 16k freed
[ 0.109085] ACPI: Core revision 20080321
[ 0.114631] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.116230] weird, boot CPU (#0) not listedby the BIOS.
[ 0.116234] SMP motherboard not detected.
[ 0.116240] Local APIC not detected. Using dummy APIC emulation.
[ 0.116243] SMP disabled
[ 0.116354] Brought up 1 CPUs
[ 0.116360] Total of 1 processors activated (2935.90 BogoMIPS).
[ 0.116378] CPU0 attaching sched-domain:
[ 0.116383] domain 0: span 0
[ 0.116386] groups: 0
[ 0.116854] net_namespace: 660 bytes
[ 0.116870] Booting paravirtualized kernel on bare hardware
[ 0.117274] NET: Registered protocol family 16
[ 0.117673] ACPI: bus type pci registered
[ 0.149072] PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1
[ 0.149076] PCI: Using configuration type 1 for base access
[ 0.149092] Setting up standard PCI resources
[ 0.153287] ACPI: EC: Look up EC in DSDT
[ 0.157270] ACPI: Interpreter enabled
[ 0.157277] ACPI: (supports S0 S1 S4 S5)
[ 0.157298] ACPI: Using PIC for interrupt routing
[ 0.162098] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.162487] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
[ 0.162493] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
[ 0.162695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.175318] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.175499] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.175713] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.175925] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.176150] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.176205] pnp: PnP ACPI init
[ 0.176217] ACPI: bus type pnp registered
[ 0.179974] pnp: PnP ACPI: found 13 devices
[ 0.179980] ACPI: ACPI bus type pnp unregistered
[ 0.179987] PnPBIOS: Disabled by ACPI PNP
[ 0.180496] PCI: Using ACPI for IRQ routing
[ 0.180892] system 00:00: iomem range 0xcb800-0xcbfff has been reserved
[ 0.180898] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.180902] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.180907] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.180911] system 00:00: iomem range 0xfff0000-0xfffffff could not be reserved
[ 0.180916] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.180920] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.180924] system 00:00: iomem range 0x100000-0xffeffff could not be reserved
[ 0.180929] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.180942] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.211603] PCI: Bridge: 0000:00:01.0
[ 0.211608] IO window: disabled.
[ 0.211613] MEM window: 0xdc000000-0xddffffff
[ 0.211618] PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff
[ 0.211638] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.211675] NET: Registered protocol family 2
[ 0.211823] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.212209] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.212391] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.212564] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.212569] TCP reno registered
[ 0.212678] NET: Registered protocol family 1
[ 0.212880] checking if image is initramfs... it is
[ 0.712057] Switched to high resolution mode on CPU 0
[ 0.892645] Freeing initrd memory: 6023k freed
[ 0.893858] audit: initializing netlink socket (disabled)
[ 0.893889] type=2000 audit(1247792017.892:1): initialized
[ 0.894092] Total HugeTLB memory allocated, 0
[ 0.894209] VFS: Disk quotas dquot_6.5.1
[ 0.894264] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.894333] msgmni has been set to 500
[ 0.894519] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.894526] io scheduler noop registered
[ 0.894529] io scheduler anticipatory registered
[ 0.894532] io scheduler deadline registered
[ 0.894545] io scheduler cfq registered (default)
[ 0.894569] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 0.894576] PCI: VIA PCI bridge detected.Disabling DAC.
[ 0.894581] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.894628] pci 0000:01:00.0: Boot video device
[ 0.895174] isapnp: Scanning for PnP cards...
[ 1.249326] isapnp: No Plug & Play device found
[ 1.253599] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.253808] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.253988] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.254586] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.254837] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.258160] brd: module loaded
[ 1.258335] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.258746] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.258755] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.258995] mice: PS/2 mouse device common for all mice
[ 1.259216] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.259246] rtc0: alarms up to one year, y3k
[ 1.259303] cpuidle: using governor ladder
[ 1.259307] cpuidle: using governor menu
[ 1.259316] No iBFT detected.
[ 1.260105] TCP cubic registered
[ 1.260112] NET: Registered protocol family 17
[ 1.260125] Using IPI No-Shortcut mode
[ 1.260331] registered taskstats version 1
[ 1.260548] rtc_cmos 00:04: setting system clock to 2009-07-17 00:53:39 UTC (1247792019)
[ 1.261085] Freeing unused kernel memory: 244k freed
[ 1.279296] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.424363] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.424449] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.424456] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 2.305659] Uniform Multi-Platform E-IDE driver
[ 2.305672] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.346273] usbcore: registered new interface driver usbfs
[ 2.346328] usbcore: registered new interface driver hub
[ 2.346378] usbcore: registered new device driver usb
[ 2.352190] USB Universal Host Controller Interface driver v3.0
[ 2.352782] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 2.352787] PCI: setting IRQ 5 as level-triggered
[ 2.352794] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 2.352813] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 2.353025] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 2.353058] uhci_hcd 0000:00:07.2: irq 5, io base 0x00009400
[ 2.353219] usb usb1: configuration #1 chosen from 1 choice
[ 2.353266] hub 1-0:1.0: USB hub found
[ 2.353283] hub 1-0:1.0: 2 ports detected
[ 2.372452] No dock devices found.
[ 2.417718] SCSI subsystem initialized
[ 2.456344] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.456352] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.456356] usb usb1: Product: UHCI Host Controller
[ 2.456359] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.456362] usb usb1: SerialNumber: 0000:00:07.2
[ 2.456477] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 2.456497] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 2.456545] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 2.456579] uhci_hcd 0000:00:07.3: irq 5, io base 0x00009800
[ 2.456733] usb usb2: configuration #1 chosen from 1 choice
[ 2.456784] hub 2-0:1.0: USB hub found
[ 2.456803] hub 2-0:1.0: 2 ports detected
[ 2.461396] libata version 3.00 loaded.
[ 2.533336] Floppy drive(s): fd0 is 1.44M
[ 2.551874] FDC 0 is a post-1991 82077
[ 2.560269] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.560277] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.560281] usb usb2: Product: UHCI Host Controller
[ 2.560285] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.560288] usb usb2: SerialNumber: 0000:00:07.3
[ 2.560388] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:07.1
[ 2.560421] VP_IDE: not 100% native mode: will probe irqs later
[ 2.560447] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
[ 2.560463] ide0: BM-DMA at 0x9000-0x9007
[ 2.560479] ide1: BM-DMA at 0x9008-0x900f
[ 2.560488] Probing IDE interface ide0...
[ 2.636028] Marking TSC unstable due to: TSC halts in idle.
[ 2.699792] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 2.867391] usb 1-1: configuration #1 chosen from 1 choice
[ 2.870850] usb 1-1: New USB device found, idVendor=083a, idProduct=4505
[ 2.870850] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 2.870850] usb 1-1: Product: USB2.0 WLAN
[ 2.870850] usb 1-1: Manufacturer: SMC
[ 3.424224] hda: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
[ 4.208229] hdb: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
[ 4.264118] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.264209] hda: MWDMA2 mode selected
[ 4.264306] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.264422] hdb: UDMA/33 mode selected
[ 4.264573] Probing IDE interface ide1...
[ 4.680236] hdc: ST340016A, ATA DISK drive
[ 5.352096] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.352286] hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 5.352291] hdc: UDMA/33 mode selected
[ 5.352416] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.352474] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.353826] sata_via 0000:00:0d.0: version 2.3
[ 5.354440] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 5.354446] PCI: setting IRQ 11 as level-triggered
[ 5.354453] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 5.354600] sata_via 0000:00:0d.0: routed to hard irq line 11
[ 5.354755] scsi0 : sata_via
[ 5.354925] scsi1 : sata_via
[ 5.355006] scsi2 : sata_via
[ 5.355052] ata1: SATA max UDMA/133 port i16@0xac00 bmdma 0xbc00 irq 11
[ 5.355057] ata2: SATA max UDMA/133 port i16@0xb000 bmdma 0xbc08 irq 11
[ 5.355061] ata3: PATA max UDMA/133 port i16@0xb400 bmdma 0xbc10 irq 11
[ 10.712043] ata1: link is slow to respond, please be patient (ready=0)
[ 15.360038] ata1: COMRESET failed (errno=-16)
[ 20.720043] ata1: link is slow to respond, please be patient (ready=0)
[ 25.368038] ata1: COMRESET failed (errno=-16)
[ 30.728040] ata1: link is slow to respond, please be patient (ready=0)
[ 60.408037] ata1: COMRESET failed (errno=-16)
[ 65.432031] ata1: COMRESET failed (errno=-16)
[ 65.432074] ata1: reset failed, giving up
[ 65.762483] ata2: SATA link down (SStatus 0 SControl 310)
[ 65.991421] hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
[ 65.991434] Uniform CD-ROM driver Revision: 3.20
[ 65.998082] hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 66.006053] hdc: max request size: 128KiB
[ 66.006613] hdc: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
[ 66.006620] hdc: cache flushes not supported
[ 66.006702] hdc: hdc1 hdc2 hdc3 < hdc5 >
[ 66.300089] PM: Starting manual resume from disk
[ 66.355771] kjournald starting. Commit interval 5 seconds
[ 66.355771] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.066026] udevd version 125 started
[ 69.381832] Linux agpgart interface v0.103
[ 69.401744] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 69.406766] agpgart: AGP aperture is 64M @ 0xd8000000
[ 69.421751] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 69.448288] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 69.476761] parport_pc: VIA 686A/8231 detected
[ 69.476768] parport_pc: probing current configuration
[ 69.476789] parport_pc: Current parallel port base: 0x378
[ 69.476840] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 69.572203] parport_pc: VIA parallel port: io=0x378, irq=7
[ 70.088290] input: Power Button (FF) as /class/input/input1
[ 70.119695] ACPI: Power Button (FF) [PWRF]
[ 70.119834] input: Power Button (CM) as /class/input/input2
[ 70.148197] ACPI: Power Button (CM) [PWRB]
[ 70.148320] input: Sleep Button (CM) as /class/input/input3
[ 70.177491] ACPI: Sleep Button (CM) [SLPB]
[ 70.340090] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[ 70.499105] phy0: Selected rate control algorithm 'pid'
[ 71.083114] zd1211rw 1-1:1.0: phy0
[ 71.083151] usbcore: registered new interface driver zd1211rw
[ 71.218121] input: PC Speaker as /class/input/input4
[ 71.649573] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 71.649582] PCI: setting IRQ 10 as level-triggered
[ 71.649589] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 71.649734] PCI: Setting latency timer of device 0000:00:07.5 to 64
[ 72.118464] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
[ 73.504134] Adding 746980k swap on /dev/hdc5. Priority:-1 extents:1 across:746980k
[ 74.039490] EXT3 FS on hdc2, internal journal
[ 74.448908] loop: module loaded
[ 77.693068] lp0: using parport0 (interrupt-driven).
[ 77.728914] ppdev: user-space parallel port driver
[ 78.473666] NET: Registered protocol family 10
[ 78.474465] lo: Disabled Privacy Extensions
[ 79.859332] RPC: Registered udp transport module.
[ 79.859342] RPC: Registered tcp transport module.
[ 79.934555] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 79.996465] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 80.020128] NFSD: starting 90-second grace periodHors ligne
#67 Le 18/07/2009, à 00:09
- frafa
Re : Probleme Disque dur
Bon une der des der 
ta carte à je pense besoin de 2 driver
1 pour la partie sata et un pour la partie ide
sous Ubuntu le fait d'inscrire le module sata ==> sata_via
ajoutait automatiquement le module ide ==> pata_via, visible dans le retour de
lsmod | grep -i via que tu avait fait sous Ubuntu.
alors que sous debian apparement le module pata_via
ne s'est pas inscrit automatiquement.
fait un essai en inscrivant les 2 modules
supuis
modprobe sata_viapuis
modprobe pata_viaet pour finir refait un fdisk des fois que...
fdisk -lHors ligne
#68 Le 18/07/2009, à 12:57
- shikamaru
Re : Probleme Disque dur
quand je fait modprobe pata_via debain m'affiche :
FATAL : Module pata_via not found
Hors ligne
#69 Le 18/07/2009, à 15:30
- frafa
Re : Probleme Disque dur
encore un truc bizarre...
apparement Debian ne fournit que le module sata_via.ko
pas de pata disponible alors que avec le kernel ubuntu que tu avait tésté
il etait présent mais bogé... ==> /lib/modules/2.6.28-6-386/kernel/drivers/ata/pata_via.ko
sur Debian a juste le module sata...
http://packages.debian.org/lenny/i386/linux-image-2.6.26-2-486/filelist
/lib/modules/2.6.26-2-486/kernel/drivers/ata/sata_via.ko
Hors ligne
#70 Le 18/07/2009, à 15:52
- shikamaru
Re : Probleme Disque dur
Et je fait quoi ?
Hors ligne
#71 Le 18/07/2009, à 16:39
- frafa
Re : Probleme Disque dur
j'ai plus d'idées, fait toi la main sous debian ou ubuntu
et apres faudra passer par recompiler un kernel pour activer les driver dans le kernel
http://doc.ubuntu-fr.org/kernel
Hors ligne
#72 Le 18/07/2009, à 17:02
- shikamaru
Re : Probleme Disque dur
Bah j'ai demander de l'aide sur le forum de debian ^^
Merci bouceaup frafa!
Hors ligne
#73 Le 18/07/2009, à 17:03
- frafa
Re : Probleme Disque dur
Tiens-nous au courrant
Hors ligne
#74 Le 18/07/2009, à 17:43
- shikamaru
Re : Probleme Disque dur
Ok pas de problème
Hors ligne
#75 Le 25/07/2009, à 13:39
- shikamaru
Re : Probleme Disque dur
C'est bon tous fonctionne nickel.
Sinon j'ai une autre question. Comment on fait pour choisir emplacement des installation ? et il est possible de changer l'emplacement de tous les logiciel de ubuntu déjà installer ou près installer ?
Dernière modification par shikamaru (Le 25/07/2009, à 13:39)
Hors ligne