Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#101 Le 03/02/2007, à 13:07

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bonjour uperu,

Extrait de ma documentation pour Ekiga:

Pour vérifier que votre configuration actuelle supporte ce que requiert Ekiga tapez ceci dans un terminal :

$ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE -

Essayez de parler dans votre micro, vous devriez vous entendre dans votre casque/enceintes avec un léger retard (environ une demi seconde).

Cordialement,
Yannick

Dernière modification par Yannick@AMD64 (Le 03/02/2007, à 13:07)


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#102 Le 03/02/2007, à 13:18

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

j'ai essayé mais rien ne se passe et de plus je suis sorti du terminal en fermant la fenêtre ne sachant comment faire;
Par contre dans Alsa Miser,il ya 2 points rouges au-dessus de Mic et le Mic Boost (+20) ne réagit pas!
'ai inscrit au-dessus: Card.intel 8280108-ICH4 | Chip.SigmaTel STAC9750.51


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#103 Le 03/02/2007, à 13:38

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bonjour uperu,

Regarde dans alsamixer:
Tape la touche [F4], tu changes alors de mode pour entrer dans le mode capture.

Utilise les flèches [<-] et [->] pour te déplacer, [flèche_vers_le_haut] pour monter le volume et [flèche_vers_le_bas] pour le baisser. [ESPACE] pour activer: Tu dois avoir "CAPTUR" en rouge qui s'affiche lorsque c'est activé. Notemment, le canal "Capture" doit avoir du volume et être activé ("CAPTUR" est écrit en rouge au-dessus).

Extrait du manuel d'alsamixer:

View Mode Controls
       Function  keys  are  used  to change view modes.  You can switch to the
       help mode and the proc info mode via F1 and F2 keys, respectively.   On
       terminals  that  can’t  use  function keys like gnome-terminal, ? and /
       keys can be used alternatively for help and proc modes.

       F3, F4 and F5 keys are used to switch to playback, capture and all view
       mode,  respectively.  TAB key toggles the current view mode circularly.

Pour quitter alsamixer: Tape [ECHAP]
Cordialement,
Yannick

P.S.: (extrait du manuel d'alsamixer à traduire...)

MIXER VIEWS
       The top-left corner of alsamixer is the are to show some basic informa‐
       tion: the card name, the mixer chip name, the current view mode and the
       currently  selected  mixer  item.  When the mixer item is switched off,
       [Off] is displayed in its name.

       Volume bars are located below the  basic  information  area.   You  can
       scroll  left/right  when  all controls can’t be put in a single screen.
       The name of each control is shown in the bottom below the volume  bars.
       The currently selected item is drawn in red and/of emphasized.

       Each  mixer  control with volume capability shows a box and the current
       volume filled in that box.  The volume percentages are displayed  below
       the  volume  bar for left and right channels.  For a mono control, only
       one value is shown there.

       When a mixer control is turned off, M (mute) appears below  the  volume
       bar.   When it’s turned on, O in green appears instead.  You can toggle
       the switch via m key.

       When a mixer control has capture capability, the capture  flag  appears
       below  the  volume bar, too.  When the capture is turned off, ------ is
       shown.  CAPTUR in red appears when the capture switch is turned on.  In
       addition,  L  and  R  letters appear in left and right side to indicate
       that left and the right channels are turned on.

       Some controls have the enumeration list, and don’t show boxes but  only
       texts  which  indicate  the  currently active item.  You can change the
       item via up/down keys.

VIEW MODES
       alsamixer has three view modes: playback,  capture  and  all.   In  the
       playback view, only the controls related with playback are shown.  Sim‐
       ilarly, only the controls for capture (recording) are shown in the cap‐
       ture  view.   The  all  view mode shows all controls.  The current view
       mode is displayed in the top-left  position  together  with  the  mixer
       name, etc.

       The  default  view mode is the playback view.  You can change it via -V
       option.

       Each view mode can be switched via keyboard  commands,  too.   See  the
       next section.

Dernière modification par Yannick@AMD64 (Le 03/02/2007, à 13:48)


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#104 Le 03/02/2007, à 14:02

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

je ne peux pas faire ce que tu  me dit dans Alsamixer::F4 ne donne rien; j'ai Master ,Master mono,head etc....et au dessus j'ai comme des petits haut-parleurs que je peux blanchir ou griser et monter le son ou pas et tous les cadenas sont ouverts;
j'ai pu tester skype: ça marche


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#105 Le 03/02/2007, à 15:06

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bonjour uperu,

Bien si skype marche, c'est que ton micro est bien configuré.

Peut-êre qu'Ekiga n'utilise pas le bon micro:

Vas voir dans Edition->Préférences->Périphériques audio->Périphérique d'entrée

Essaye les micros les uns après les autres dans la liste qui t'est proposée.

Cordialement,
Yannick


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#106 Le 03/02/2007, à 15:31

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

maintenant avec tout ce que j'ai trafiqué, je n'ai même plus la sonnerie; et dans le choix des périfériques je n'ai que défaut ou intel etc... et pas sigma etc...


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#107 Le 03/02/2007, à 17:45

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bonjour uperu,

Configurer Ekiga pour qu’il fonctionne en même temps que les autres applications sonores :

Allez dans le menu Édition → Préférences → Périphériques → Périphériques audio

- Selectionnez "ALSA" comme greffon audio

- Selectionnez "Default" comme périphérique de sortie

- Selectionnez "Default" comme périphérique d’entrée

Allez dans le menu Édition → Préférences → Général → Évènements sonores

- Selectionnez "Default" comme périphérique alternatif de sortie

Cordialement,
Yannick


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#108 Le 03/02/2007, à 18:19

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Merci Yannick, mais tout ça c'est fait!
en regardant de plus prés dans Alsa mixer j'ai dans PCM out Path=>dessous Mute;
comme je te le disais précédemment je n'entends plus la sonnerie quand je tente un appel!


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#109 Le 03/02/2007, à 18:30

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

dans le" volume control" onglet Pmayback:=>Speaker au maximum ouvert
                                                                      =>PCM-2 fermé mais au maximum
                                        onglet "capture:=>Volume-microdésactivé mais au maximum
                                        onglet Line-in :=>Microphone:activé et au maximum
                                       onglet CD:=>micro fermé et au minimum
                                        onglet Phone-out=>micro fermémais au maximum
vois-tu quelque chose qui cloche?


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#110 Le 03/02/2007, à 19:34

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bonjour uperu,

Hum... On rame pas mal là...

Je dirai que onglet "capture:=>Volume-microdésactivé mais au maximum" me semble bizarre, essaye d'activer le micro si tu peux.

Tu peux aussi probablement activer ceci : "PCM-2 fermé mais au maximum"

Puis copie-colle ceci dans un terminal:

arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE -

Parle dans ton micro, tu devrais t'entendre avec un léger retard (le retard est important).

Fais [Ctrl]+[c] en même temps pour quitter cette application.

Cordialement,
Yannick

Dernière modification par Yannick@AMD64 (Le 03/02/2007, à 19:40)


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#111 Le 03/02/2007, à 21:11

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bon, toujours rien!
dans le controleur de volume, j'ai pu changer Sigma par Intel (Alsa Mixer)dans* lecture=>maximum.*Master Mono=>?*Headphone=>maximum.
dans Capture:
*Entrée ligne=>tout fermé.*Microphone=>activé et au maximum.*Enregistrement=>activé, au maximum
dans Paramètre:Mic Boost (+20dB)=>activé

$ arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE -
Enregistrement en cours WAVE 'stdout' : Signed 16 bit Little Endian, Taux 8000 Hz, Mono
Lecture en cours WAVE 'stdin' : Signed 16 bit Little Endian, Taux 8000 Hz, Mono
surcharge!!! (long de 72350,799 ms au minimum)

donc: rien!


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#112 Le 03/02/2007, à 21:45

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

du nouveau: lorsque je teste mes périfériques le petit trait s'anime au son de ma voix en vert et jem'entends!donc les tests sont bons.
j'entends de nouveau la sonnerie mais sip:500ekiga.net sonne et ne réponds pas
Aux: c'est quoi?

Dernière modification par uperu (Le 03/02/2007, à 23:09)


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#113 Le 03/02/2007, à 23:09

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Je pense que cela fonctionne maintenant et j'ai voulu m'inscrire à ekiga en allant sur le site indiqué dans le mail et voici ce que j'obtiens:

Not Found

The requested URL /serweb/user/reg/confirmation.php was not found on this server.
Apache/2.2.3 (Debian) PHP/4.4.4-8 mod_ssl/2.2.3 OpenSSL/0.9.8c Server at www.ekiga.net Port 80
Comment je fais Yannick?
dans la fenêtre d'ekiga, tout en bas est écrit:l'inscription a échoué: interdit


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#114 Le 04/02/2007, à 10:40

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bonjour Yannick,

en dehors du fait que je  n'arrive pas à m'inscrire sur ekiga, j'arrive maintenant à utiliser
ekiga via voipbuster mais la personne que j'appelle me dit que le son est parasité par des bruits de" grattage"; peux-tu expliquer cela Yannick?
Dans ALsa Mixer: dans l'onglet "Lecture" le volume général est à moitié,le Master mono est à fond, le Headphone au 3/4,le PCM à fond,le H-Parleur du PC est à fond
dans l'onglet "Capture":Entrée ligne est à fond(micro barré),CD au minimum (micro barré), Microphone au maximum(micro activé), Auxilliaire au maximum (micro barré), Enregistrement au maximum (micro activé),
Il faut surement que je baisse l'intensité du volume quelque part mais où?=>dans enregistrement?

avec mes remerciements!


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#115 Le 04/02/2007, à 23:15

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bonjour uperu,

Si je peux expliquer un bruit de grattage? Heu... non.

A mon avis, tu peux monter ton volume général (ou bien PCM) jusqu'à 80% et baisser le volume du micro à 80%.

La cause la plus fréquente d'un mauvais son, c'est l'absence de casque avec micro. Si tu as un casque cela améliore grandement la qualité, car sans casque le son qui sort des enceintes retourne dans le micro et ça fait un larsen (bruit aigu désagréable).

Ne pas mettre les volumes à fond peut éviter des saturations (le son se dégrade quand il est trop fort).

Affichage->Panneau de contrôle->statistiques te donnes des informations sur la qualité de ta liaison avec ton correspondant.

Tu peux aussi régler le son dans EKiga : Affichage->Panneau de contrôle->Paramètres audio.

Le codec audio joue aussi, PCMA / PCMU ou SPEEX 16kHz (si tu es limité en bande passante) devraient te donner le meilleur.

Le matériel peut aussi avoir des problèmes (mauvaise isolation, connection défectueuse, etc.).

Les causes peuvent être très variées...

Cordialement,
Yannick


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#116 Le 05/02/2007, à 22:52

uperu

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Merci Yannick pour ta réponse.
J'ai un casque avec micro et le problème du son  parasité par des bruits se trouve chez la personne que j'appelle  sur un poste fixe;j'ajoute que lorsque je téléphone dans Win XP directement de voipbuster mon correspondant m'entends très bien et il n'y a pas de parasites.
voici donc le résultat de:

lsmod|grep snd
snd_intel8x0           35772  2
snd_ac97_codec        100224  1 snd_intel8x0
snd_ac97_bus            2400  1 snd_ac97_codec
snd_pcm_oss            56448  0
snd_mixer_oss          20544  2 snd_pcm_oss
snd_pcm                96708  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              26884  1 snd_pcm
snd                    60004  8 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore              10784  2 snd
snd_page_alloc         11304  2 snd_intel8x0,snd_pcm

est-ce que cela te parle?
J'ajoute que j'ai essayé de suivre tes conseils: je verrai donc à mon prochain appel!
Cordialement.

Dernière modification par uperu (Le 05/02/2007, à 22:53)


ubuntero enthousiaste!
Portable DELL Inspiron 9200 17", Mémoire 2 GB(2x1 GB)  Processeur Intel® Pentium(R) M processor 1.60GHz, Carte graphique :  gallium 0.4  on Ati RV 350?!,  pavillon externe HP 19" [ 12.04 LTS]
iMac, 2,8 GHz, Intel Core 2 Duo, Memoire 2 Go 667 MHz DDR2 SDRAM, Mac OS X 10.11.6

Hors ligne

#117 Le 14/02/2007, à 16:21

The Marauder

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

SAlut tout le monde et aussi salut à toi Yannick@AMD64 smile

Je suis toujours sur Ekiga. Seulement je suis passé a kde...
Tout va bien sauf qui si j'ai une appli qui fait marcher le serveur de son kde (artsd) en même temps qu'ekiga, je perd le son.

Est-ce possible de forcer ekiga à utiliser artsd ?


Un prog sans ses Source c'est comme une plage sans le sable.
Desktop Kubuntu 10.04 - netbook Kubuntu 10.04 - Serveur Debian Lenny
Commandes a  ne pas faire

Hors ligne

#118 Le 16/02/2007, à 00:58

Sandrew

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Hello,

Grace a ce fil et la doc, j'ai reussi a
- configurer mon micro: je m'entends (avec un echo) avec l'assistant de configuration
- m'inscrire sur Ekiga.net
- appprendre un peu plus sur la VOIP (mais je reste tres novice.)

Malheureusement, mes tests avec Ekiga ne sont pas encore concluants. En appelant le service d'echo (500@ekiga.net), le son est tres hache, un peu comme si toutes les 1/4 de secondes, le son se coupe (en reception comme en emission). Il fonctionne avec les autres applications, dont le test avec la console (aplay)

En jouant avec les preferences, j'ai remarque qu'en changeant le peripherique de sortie a Default (ancienne valeur a HDA Intel), les coupures etaient un poil plus rapprochees et le message en devenait presqu'audible.

J'ai egalement constate qu'en selectionant uniquement le codec audio PCMA comme suggere dans la doc, mes appels vers l'echo etait systematiquement rejetes.

Avez vous deja rencontre ce probleme ? Une suggestion pour le resoudre ?
L'ordre des Codecs a t il une importance ? (je n'ai pas ose faire une nouvelle installe pour avoir ce famaux ilbc)

Je possede un Asus A6000, dont la web cam ne fonctionne pas sous Linux (le support video est desactive dans Ekiga).

D'avance merci

Hors ligne

#119 Le 04/03/2007, à 14:54

Lek1

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

salut, j'ai donc suivi la doc pour installer Ekiga.
Suis sous Kubuntu Dapper Drake.
Mais je ne rencontre que des problèmes.
Ai télécharger les trois .tar.gz : pwlib ; opal ; ekiga.
Ai suivi les commandes pour installer :
installer pwlib

$ cd pwlib-1.10.2/
$ ./configure --prefix=/usr --enable-plugins --enable-alsa --enable-v4l2 --enable-v4l --enable-opal --enable-openh323 --enable-avc --enable-dc
$ make
$ sudo checkinstall

quand je fais le ./configure xxxxxx , j'ai ceci

./configure --prefix=/usr --enable-plugins --enable-als
a --enable-v4l2 --enable-v4l --enable-opal --enable-openh323 --enable-avc --enable-
dc
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
configure: PTLib version is 1.10.4
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
configure: OSTYPE set to linux
configure: OSRELEASE set to "2.6.15-28-k7"
configure: MACHTYPE set to x86
configure: gcc version is 4.0.3
checking checking if pragma implementation should be used... no
checking whether byte ordering is bigendian... no
checking if linker accepts -felide-constructors... yes
checking if linker accepts -Wreorder... no
checking if compiler uses RTTI by default... yes
checking how to run the C++ preprocessor... g++ -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for int... yes
checking size of int... 4
checking for working long double with more range or precision than double... yes
checking for flex... no
configure: error: pwlib needs the GNU Project fast lexical analyzer generator flex

et là je ne peux plus avancer, quoi faire ?
Merci de bien vouloir m'aider.

Dernière modification par Lek1 (Le 04/03/2007, à 14:59)


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#120 Le 04/03/2007, à 15:17

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Salut,

Cette commande devrait régler tes problèmes de dépendances.

$ sudo apt-get install build-essential wget checkinstall libldap2 libldap2-dev flex bison autogen gnome-common automake1.8 libgconf2-4 libgconf2-dev libsdl1.2debian-alsa libsdl1.2-dev libgnome2-0 libgnome2-dev libgnomeui-0 libgnomeui-dev libebook1.2-5 libebook1.2-dev libdbus-glib-1-2 libdbus-glib-1-dev libdv4-dev libdv4 libdc1394-13 libdc1394-13-dev libavc1394-0 libavc1394-dev libraw1394-5 libraw1394-dev avahi-daemon libavahi-client3 libavahi-client-dev libavahi-common3 libavahi-common-data libavahi-common-dev libavahi-glib1 libavahi-glib-dev libavahi-core4 yelp

Cordialement,
Yannick


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#121 Le 04/03/2007, à 15:23

Lek1

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Yannick@AMD64 a écrit :

Salut,

Cette commande devrait régler tes problèmes de dépendances.

$ sudo apt-get install build-essential wget checkinstall libldap2 libldap2-dev flex bison autogen gnome-common automake1.8 libgconf2-4 libgconf2-dev libsdl1.2debian-alsa libsdl1.2-dev libgnome2-0 libgnome2-dev libgnomeui-0 libgnomeui-dev libebook1.2-5 libebook1.2-dev libdbus-glib-1-2 libdbus-glib-1-dev libdv4-dev libdv4 libdc1394-13 libdc1394-13-dev libavc1394-0 libavc1394-dev libraw1394-5 libraw1394-dev avahi-daemon libavahi-client3 libavahi-client-dev libavahi-common3 libavahi-common-data libavahi-common-dev libavahi-glib1 libavahi-glib-dev libavahi-core4 yelp

Cordialement,
Yannick

merci Yannick pour ta rapide réponse.
J'ai lancé la commande que tu m'as donné, et voici ce qu'il me dit :

./configure --prefix=/usr --enable-plugins --en
able-alsa --enable-v4l2 --enable-v4l --enable-opal --enable-openh323 --enab
le-avc --enable-dc
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
configure: PTLib version is 1.10.4
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
configure: OSTYPE set to linux
configure: OSRELEASE set to "2.6.15-28-k7"
configure: MACHTYPE set to x86
configure: gcc version is 4.0.3
checking checking if pragma implementation should be used... no
checking whether byte ordering is bigendian... no
checking if linker accepts -felide-constructors... yes
checking if linker accepts -Wreorder... no
checking if compiler uses RTTI by default... yes
checking how to run the C++ preprocessor... g++ -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for int... yes
checking size of int... 4
checking for working long double with more range or precision than double..                         . yes
checking for flex... no
configure: error: pwlib needs the GNU Project fast lexical analyzer generat                         or flex

Toujours la même erreur, je précise que j'a : pwlib-1.10.4
merci

Dernière modification par Lek1 (Le 04/03/2007, à 15:24)


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#122 Le 04/03/2007, à 16:19

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Bonjour,

Le problème c'est qu'il ne trouve pas le programme "flex", vérifie qu'il est installé. Peut-être qu'il faut aussi le paquet avec "-devel" dedans.

Cordialement,
Yannick


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#123 Le 04/03/2007, à 16:43

Lek1

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Yannick@AMD64 a écrit :

Bonjour,

Le problème c'est qu'il ne trouve pas le programme "flex", vérifie qu'il est installé. Peut-être qu'il faut aussi le paquet avec "-devel" dedans.

Cordialement,
Yannick

grand merci pour ton aide, j'ai pu progrésser. Il a fallu installer aussi : bison.
J'ai pu faire le : make. Mais pas la dernière commande.
Voilà le résultat.

make
make P_SHAREDLIB=1 opt
make[1]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4 »
set -e; make -C src/ptlib/unix opt; make -C plugins opt;
make[2]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/src/ptlib/unix »
g++ -D_REENTRANT -Wall -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -M assert.cxx >> /home/nwlib-1.10.4/lib/obj_linux_x86_r/*.dep
make[2]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/src/ptlib/unix »
make[2]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/src/ptlib/unix »
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/vfakeio.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/vfakeio.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/videoio.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/videoio.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/vconvert.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/vconvert.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/pvidchan.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pvidchan.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/tinyjpeg.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/tinyjpeg.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/jidctflt.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/jidctflt.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/sound.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/sound.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/pdns.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pdns.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/enum.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/enum.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/ptts.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/ptts.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/asner.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/asner.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/pasn.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pasn.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/pstun.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pstun.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/pnat.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pnat.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/pwavfile.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pwavfile.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/dtmf.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/dtmf.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/http.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/http.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/httpclnt.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/httpclnt.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/ipacl.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/ipacl.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/qchannel.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/qchannel.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/delaychan.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/delaychan.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/memfile.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/memfile.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/cypher.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/cypher.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/random.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/random.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../../ptclib/inetprot.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/inetprot.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/notifier_ext.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/notifier_ext.o
bison ../common/getdate.y -o ../common/getdate.tab.c
../common/getdate.y: conflits: 8 décalage/réduction, 18 réduction/réduction
cc  -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -c ../common/getdate.ta /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/getdate.tab.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct uicmp.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/uicmp.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct socket.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/socket.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct udll.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/udll.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct channel.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/channel.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct osutil.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/osutil.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct tlib.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/tlib.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct switch.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/switch.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct assert.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/assert.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/pluginmgr.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pluginmgr.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/sockets.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/sockets.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/qos.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/qos.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/ptime.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/ptime.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/osutils.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/osutils.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/safecoll.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/safecoll.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/collect.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/collect.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/contain.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/contain.o
g++ -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -Os   -felide-construct ../common/object.cxx -o /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/object.o
/usr/bin/ar rcs /home/nuxli/pwlib-1.10.4/lib/libpt_linux_x86_r_s.a   /home/nuxli/pwlib-1.10.4/j_linux_x86_r/vfakeio.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/videoio.o  /home/nuxli/p.10.4/lib/obj_linux_x86_r/vconvert.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pvidchan.o /nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/tinyjpeg.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86ctflt.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/sound.o  /home/nuxli/pwlib-1.10.4/lib/obx_x86_r/pdns.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/enum.o  /home/nuxli/pwlib-1.10.4/j_linux_x86_r/ptts.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/asner.o  /home/nuxli/pwlib-/lib/obj_linux_x86_r/pasn.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pstun.o  /home/nuxli-1.10.4/lib/obj_linux_x86_r/pnat.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pwavfile.o  /uxli/pwlib-1.10.4/lib/obj_linux_x86_r/dtmf.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/htthome/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/httpclnt.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux/ipacl.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/qchannel.o  /home/nuxli/pwlib-1.10.4/lilinux_x86_r/delaychan.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/memfile.o  /home/nuxli/p.10.4/lib/obj_linux_x86_r/cypher.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/random.o  /holi/pwlib-1.10.4/lib/obj_linux_x86_r/inetprot.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/nr_ext.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/getdate.tab.o  /home/nuxli/pwlib-1.10.4/j_linux_x86_r/uicmp.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/socket.o  /home/nuxli/pwli.4/lib/obj_linux_x86_r/udll.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/channel.o  /home/nwlib-1.10.4/lib/obj_linux_x86_r/osutil.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/tlib.o /nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/switch.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_rt.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pluginmgr.o  /home/nuxli/pwlib-1.10.4/lib/obx_x86_r/sockets.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/qos.o  /home/nuxli/pwlib-1.10.obj_linux_x86_r/ptime.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/osutils.o  /home/nuxli/p.10.4/lib/obj_linux_x86_r/safecoll.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/collect.o  nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/contain.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_rt.o
EXTLIBS =
SYSLIBS =
g++ -shared -Wl,-soname,libpt_linux_x86_r.so.1.10.4 -o /home/nuxli/pwlib-1.10.4/lib/libpt_linur.so.1.10.4  -L/home/nuxli/pwlib-1.10.4/lib    /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/vfo  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/videoio.o  /home/nuxli/pwlib-1.10.4/lib/obj_li6_r/vconvert.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pvidchan.o  /home/nuxli/pwlib-1.1b/obj_linux_x86_r/tinyjpeg.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/jidctflt.o  /home/nwlib-1.10.4/lib/obj_linux_x86_r/sound.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pdns.o  nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/enum.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pt/home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/asner.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_xasn.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pstun.o  /home/nuxli/pwlib-1.10.4/lib/obj_x86_r/pnat.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/pwavfile.o  /home/nuxli/pwlib-1.10.obj_linux_x86_r/dtmf.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/http.o  /home/nuxli/pwlib4/lib/obj_linux_x86_r/httpclnt.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/ipacl.o  /home/pwlib-1.10.4/lib/obj_linux_x86_r/qchannel.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/delao  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/memfile.o  /home/nuxli/pwlib-1.10.4/lib/obj_li6_r/cypher.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/random.o  /home/nuxli/pwlib-1.10.4/j_linux_x86_r/inetprot.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/notifier_ext.o  /home/nwlib-1.10.4/lib/obj_linux_x86_r/getdate.tab.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/ui /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/socket.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux/udll.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/channel.o  /home/nuxli/pwlib-1.10.4/lib/nux_x86_r/osutil.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/tlib.o  /home/nuxli/pwlib-1.1b/obj_linux_x86_r/switch.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/assert.o  /home/nuxli-1.10.4/lib/obj_linux_x86_r/pluginmgr.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/sockets.me/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/qos.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/osutils.o  /home/nuxli/pwlib-1.10.4/lib/obj_li6_r/safecoll.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/collect.o  /home/nuxli/pwlib-1.10/obj_linux_x86_r/contain.o  /home/nuxli/pwlib-1.10.4/lib/obj_linux_x86_r/object.o  -lpthread -v -ldl
cd /home/nuxli/pwlib-1.10.4/lib ; rm -f libpt_linux_x86_r.so ; ln -sf libpt_linux_x86_r.so.1.1bpt_linux_x86_r.so
cd /home/nuxli/pwlib-1.10.4/lib ; rm -f libpt_linux_x86_r.so.1 ;  ln -sf libpt_linux_x86_r.so. libpt_linux_x86_r.so.1
cd /home/nuxli/pwlib-1.10.4/lib ; rm -f libpt_linux_x86_r.so.1.10 ;  ln -sf libpt_linux_x86_r.0.4 libpt_linux_x86_r.so.1.10
make[2]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/src/ptlib/unix »
make[2]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins »
set -e; make  -C sound_oss opt; make  -C vidinput_v4l opt; make  -C vidinput_v4l2 opt;
make[3]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/sound_oss »
g++ -D_REENTRANT -Wall -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -M sound_oss.cxx >> ../pevice/sound/*.dep
make[3]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/sound_oss »
make[3]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/sound_oss »
mkdir -p ../pwlib/device/sound
g++  -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include \
         \
        -I. -shared sound_oss.cxx -o ../pwlib/device/sound/oss_pwplugin.so
make[3]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/sound_oss »
make[3]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l »
g++ -D_REENTRANT -Wall -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include -M vidinput_v4l.cxx >> .b/device/videoinput/*.dep
make[3]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l »
make[3]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l »
mkdir -p ../pwlib/device/videoinput
g++  -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include \
         \
        -I. -shared vidinput_v4l.cxx -o ../pwlib/device/videoinput/v4l_pwplugin.so
make[3]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l »
make[3]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l2 »
mkdir -p ../pwlib/device/videoinput
g++  -D_REENTRANT -Wall  -fPIC -DPIC -I/home/nuxli/pwlib-1.10.4/include \
        vidinput_names.cxx \
        -I. -shared vidinput_v4l2.cxx -o ../pwlib/device/videoinput/v4l2_pwplugin.so
make[3]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l2 »
make[2]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins »
make[1]: quittant le répertoire « /home/nuxli/pwlib-1.10.4 »
set -e; make -C src/ptlib/unix optshared; make -C plugins optshared;
make[1]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/src/ptlib/unix »
make P_SHAREDLIB=1 opt
make[2]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/src/ptlib/unix »
make[2]: Rien à faire pour « opt ».
make[2]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/src/ptlib/unix »
make[1]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/src/ptlib/unix »
make[1]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins »
make P_SHAREDLIB=1 opt
make[2]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins »
set -e; make  -C sound_oss opt; make  -C vidinput_v4l opt; make  -C vidinput_v4l2 opt;
make[3]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/sound_oss »
make[3]: Rien à faire pour « opt ».
make[3]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/sound_oss »
make[3]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l »
make[3]: Rien à faire pour « opt ».
make[3]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l »
make[3]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l2 »
make[3]: Rien à faire pour « opt ».
make[3]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l2 »
make[2]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins »
set -e; make  -C sound_oss opt; make  -C vidinput_v4l opt; make  -C vidinput_v4l2 opt
make[2]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/sound_oss »
make[2]: Rien à faire pour « opt ».
make[2]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/sound_oss »
make[2]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l »
make[2]: Rien à faire pour « opt ».
make[2]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l »
make[2]: entrant dans le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l2
make[2]: Rien à faire pour « opt ».
make[2]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins/vidinput_v4l2 »
make[1]: quittant le répertoire « /home/nuxli/pwlib-1.10.4/plugins »
nuxli@nuxli:~/pwlib-1.10.4$  sudo checkinstall
Password:
sudo: checkinstall: command not found

où se trouve le problème maintenant ?
Encore merci de prendre de ton temps pour m'aider.


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne

#124 Le 04/03/2007, à 16:54

Yannick@AMD64

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

sudo apt-get install checkinstall

devrait régler le problème.

Yannick


sip:yannick@ekiga.net
Ekiga 3.2.7 est sorti
Wiki d'Ekiga : http://wiki.ekiga.org/ (en)

Hors ligne

#125 Le 04/03/2007, à 18:06

Lek1

Re : [Support] Ekiga : messagerie, téléphonie/VoIP et webcam via internet

Yannick@AMD64 a écrit :
sudo apt-get install checkinstall

devrait régler le problème.

Yannick

je ne peux que te remercier encore. Les choses avancent. J'en suis à l'installation d'ekiga, j'avais eu des messages d'erreur que je suis arrivé à résoudre (grâce à toi qui m'avait mis sur la voie) mais j'ai encore ce message et je ne le comprends pas :

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables EKIGA_CFLAGS
and EKIGA_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


J'ai du installer le paquet pkg-config.

J'ai fait au hasard un essai avec :  sudo checkinstall. mais il me dit :

========================= Installation results ===========================
make: *** Pas de règle pour fabriquer la cible « install ». Arrêt.

****  Installation failed. Aborting package creation.

Cleaning up...OK

Bye.

Voilà où j'en suis. Merci de ton aide  smile


"Ceux qui ne bougent pas ne sentent pas leurs chaînes." (Rosa Luxemburg)   
Debian 11

Hors ligne