#0 Re : -1 » Tuner TNT USB Avermedia A835: du nouveau ?! :-/ » Le 22/08/2012, à 10:12
- NICO3583
- Réponses : 179
Bonjour,
quelqu un a t'il un lien fonctionnel pour le git ?
je n'arrive pas a m y connecter
Merci
nico
#1 -1 » Probleme USB ubuntu 14.04 » Le 20/10/2014, à 09:48
- NICO3583
- Réponses : 2
bonjour
suite installation ubuntu 14.04
je rencontre ce probleme losque je connecte une clé USB:
Error mounting /dev/sdc1 at /media/gign_pv/KINGSTON: Command-line `mount -t "vfat" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush" "/dev/sdc1" "/media/gign_pv/KINGSTON"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
quelqu un aurait il une solution ???
merci
nico
#2 Re : -1 » Probleme USB ubuntu 14.04 » Le 21/10/2014, à 15:43
- NICO3583
- Réponses : 2
Merci..
après plusieurs tentatives de dépannage..
J'ai réinstaller le systeme..
ca refonctionne
nico
#3 Re : -1 » Comment converser aMSN ouvert après un basculement de session » Le 02/03/2010, à 18:55
- NICO3583
- Réponses : 2
Bonjour;
Pour ma part j'utilise plutot le basculement entre deux sessions plus rapide et les applications ne se ferment pas...
http://www.korben.info/lancer-2-sessions-x-avec-ubuntu.html
si ca peu répondre a ton attente...
nico
#4 -1 » raccourci fstab » Le 31/10/2008, à 19:20
- NICO3583
- Réponses : 3
Peu etre question posé plusieurs fois mais malgré mes recherches rien trouvé......
J ai modifié mon fstab afin que mes disques durs montent automatiquement avec des noms explicites....
dans /media c'est le cas mais les raccourcis automatique ont pris comme nom "media 251,0"
que faut il modifier afin que mes raccourcis prennent des noms différents....
merci
nico
#5 Re : -1 » raccourci fstab » Le 31/10/2008, à 20:56
- NICO3583
- Réponses : 3
merci beaucoup la solution à fonctionner par contre aucune modif dans mon fstab
bonne soirée
nico
#6 -1 » amsn prévisualisation photo.... » Le 01/04/2008, à 12:40
- NICO3583
- Réponses : 0
quelqu'un connait il une solution pour avoir un apercu de la photo dans l explorateur lorsque l'on veu envoyer un fichier.
merci
#7 Re : -1 » Procédure d'install des drivers 8.42.3 » Le 24/10/2007, à 12:40
- NICO3583
- Réponses : 223
avant que je commence à suivre la manip....
est ce que ca marche avec deux ecrans ?
j'ai des doutes étant donné que le xorg.conf n'est pas très simplifié...
#8 Re : -1 » Procédure d'install des drivers 8.42.3 » Le 27/10/2007, à 10:28
- NICO3583
- Réponses : 223
Pour hanuman
moi mon dual screen marche tres bien en bureau étendu...
par contre aucun effet....
voila mon xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Ecran 2" 0 0
screen 1 "Default Screen" rightof "Ecran 2"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
Option "aiglx" "false"
EndSection
Section "Files"
# path to defoma fonts
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "vbe"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "L1715S"
Vendorname "Samsung"
Modelname "Samsung SyncMaster 710N/177N/CX711N/CX701N"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "Monitor"
Identifier "710N"
Vendorname "Samsung"
Modelname "Samsung SyncMaster 710N/177N/CX711N/CX701N"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "Device"
Identifier "0 Carte vidéo générique"
Boardname "ati"
Busid "PCI:6:0:0"
Driver "fglrx"
Screen 1
EndSection
Section "Device"
Identifier "1 Carte vidéo générique"
Boardname "ati"
Busid "PCI:6:0:0"
Driver "fglrx"
Screen 0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "0 Carte vidéo générique"
Monitor "L1715S"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x1024@60" "1024x768@60" "1280x960@75" "1024x768@70" "1400x1050@60" "1024x768@75" "1600x1200@65" "1024x768@85" "1600x1200@60" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "Screen"
Identifier "Ecran 2"
Device "1 Carte vidéo générique"
Monitor "710N"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x1024@60" "1024x768@60" "1280x960@75" "1024x768@70" "1400x1050@60" "1024x768@75" "1600x1200@65" "1024x768@85" "1600x1200@60" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Section "ServerFlags"
Option "Xinerama" "true"
EndSection
Section "device" #
Identifier "device1"
Boardname "VESA driver (generic)"
Busid "PCI:6:0:1"
Driver "vesa"
Screen 0
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60" "640x480@72" "640x480@75" "640x480@85" "800x600@56" "800x600@72" "800x600@75" "800x600@85" "800x600@60" "832x624@75" "1024x768@85" "1024x768@75" "1024x768@70" "1024x768@60" "1152x864@75" "1280x1024@75" "1280x960@60" "1280x1024@60" "1280x960@75" "1400x1050@60" "1600x1200@65" "1600x1200@60"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor1"
Vendorname "Samsung"
Modelname "Samsung SyncMaster 710N/177N/CX711N/CX701N"
Horizsync 30-81
Vertrefresh 56-85
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
#9 -1 » probleme de xgl avec drivers ati » Le 30/10/2007, à 08:23
- NICO3583
- Réponses : 4
voila mon probleme
Checking for Xgl: not present.
Detected PCI ID for VGA: 06:00.0 0300: 1002:7146 (prog-if 00 [VGA])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: not present.
aborting and using fallback: /usr/bin/metacity
si j installe le paquet xserver-xgl... je ne peu rentrer dans ma session.....
si je ne l installe pas je ne peu lancer les effets 3d
est ce que j ai oublié autre chose????
merci
#10 Re : -1 » probleme de xgl avec drivers ati » Le 30/10/2007, à 16:27
- NICO3583
- Réponses : 4
ou autoriser tout ca ????
dans le xorg.conf????
et comment??
merci
#11 Re : -1 » probleme de xgl avec drivers ati » Le 30/10/2007, à 16:52
- NICO3583
- Réponses : 4
c'est une
xt1300 512 Mo
pas vu dans la blacklist
#12 Re : -1 » [Thunderbird]Question sur les comtpes utilisateurs » Le 23/10/2007, à 07:48
- NICO3583
- Réponses : 7
le port smtp chez tele2 n'est pas le 25 mais le 587. as tu fait la modification.....
sinon pour thunderbird on peu creer des profiles facilement
Applications>internet>thunderbird Profil Manager
bon courage
#13 -1 » resolution ecran » Le 25/10/2007, à 23:11
- NICO3583
- Réponses : 2
je sais pas si je vais me faire comprendre..
avec les nouveaus drivers ATI j arrive bien a etendre mon bureau sur deux ecrans...
par contre mes ecrans sont trop petit pour les images recu c a dire que le bureau change de place avant de basculer d un ecran à l'autre....
il est bien reparti sur les deux ecrans mais d une trop grande resolution si je la baisse ecran noir.....
???
merci
#14 Re : -1 » resolution ecran » Le 26/10/2007, à 10:19
- NICO3583
- Réponses : 2
désolé... j'étais en train d installer mon pc alors je suis pas aller voir plus loin dans le forum......
j ai résolu en inversant mes deux ecrans sur les sorties de la carte graphique...............
#15 Re : -1 » [résolu] configuration aMSN » Le 24/10/2007, à 07:07
- NICO3583
- Réponses : 2
autoriser l'execution est situé dans les proprietes du fichier; dans l onglet "permission" completement en bas
apres tu double cliques sur le fichier et tu choisi "executer dans un terminal"
bon courage
#16 -1 » homeplayer et ubuntu 7.10 [resolu] » Le 19/10/2007, à 12:48
- NICO3583
- Réponses : 5
est t il possible d installer homeplayer sous ubuntu 7.10 ????
merci
#17 Re : -1 » homeplayer et ubuntu 7.10 [resolu] » Le 21/10/2007, à 20:41
- NICO3583
- Réponses : 5
merci pour la reponse
ma question n'était peu etre pas assez explicite.
mais pour moi ce n'était pas evident que les depots d'une version fonctionne pour la version suivante......
#18 Re : -1 » homeplayer et ubuntu 7.10 [resolu] » Le 22/10/2007, à 07:45
- NICO3583
- Réponses : 5
oki merci
dans tous les cas ca fonctionne bien...
bonne journée
#19 -1 » ubuntu 7.10 i386 ou amd64 » Le 18/10/2007, à 22:25
- NICO3583
- Réponses : 2
mon choix est surtout une question d esthetique car je n arrive pas a activer les effets de bureau en double ecran avec la version amd64.....
j utilise les drivers fglrx pour ati
j'ai cru avoir lu sous la versions 7.04 ce n etait pas possible avec la version amd64
est ce que quelqu un peu me confirmer??
merci
#20 Re : -1 » ubuntu 7.10 i386 ou amd64 » Le 19/10/2007, à 06:28
- NICO3583
- Réponses : 2
idem...
je vais passser en i386 voir si c plus facile
merci
#21 -1 » le flux http://127.0.0.1:8081/vlccontrol.html?control=shutdown [resolu » Le 04/10/2007, à 19:21
- NICO3583
- Réponses : 3
ce message d erreur apparait lorsque je veu lancer un film a partir de homeplayer...
qqun a t il la solution
probleme surement lie a java mais.....
merci
#22 Re : -1 » le flux http://127.0.0.1:8081/vlccontrol.html?control=shutdown [resolu » Le 05/10/2007, à 11:22
- NICO3583
- Réponses : 3
J'ai solutionné en installant tout ce qui concerne JAVA...... meme ce qui n est pas indiqué dans les manuels......
ca fonctionne tres bien
#23 Re : -1 » le flux http://127.0.0.1:8081/vlccontrol.html?control=shutdown [resolu » Le 05/10/2007, à 16:32
- NICO3583
- Réponses : 3
merci... ca faisai un moment que je cherchai lol
#24 -1 » probleme de kernel » Le 29/08/2007, à 11:38
- NICO3583
- Réponses : 1
j ai un souci a l installation de ubuntu
le live cd demarre. je configure langue francaise apres je lance demarrer ubuntu et apres probleme "kernel panic" ?????
et la c moi qui panique... lol
conduite a tenir ??
le cd fonctionne sur un autre pc
le lecteur cd a été remplacé
le dd est completement formater
merci